Hi there,
I get these warnings while compiling 2.6.9-rc3:
sound/drivers/opl3/opl3_lib.c: In function `snd_opl3_cs4281_command':
sound/drivers/opl3/opl3_lib.c:101: warning: passing arg 2 of `writel' makes pointer from integer without a cast
sound/drivers/opl3/opl3_lib.c:104: warning: passing arg 2 of `writel' makes pointer from integer without a cast
Hope this fix is correct.
Regards,
Boris.
--- sound/drivers/opl3/opl3_lib.c.orig 2004-09-30 14:22:08.000000000 +0200
+++ sound/drivers/opl3/opl3_lib.c 2004-09-30 14:23:50.000000000 +0200
@@ -98,10 +98,10 @@ void snd_opl3_cs4281_command(opl3_t * op
spin_lock_irqsave(&opl3->reg_lock, flags);
- writel((unsigned int)cmd, port << 2);
+ writel((unsigned int)cmd, (void __iomem *)(port << 2));
udelay(10);
- writel((unsigned int)val, (port + 1) << 2);
+ writel((unsigned int)val, (void __iomem *)((port + 1) << 2));
udelay(30);
spin_unlock_irqrestore(&opl3->reg_lock, flags);
On Thu, Sep 30, 2004 at 02:28:53PM +0200, Borislav Petkov wrote:
> Hi there,
> I get these warnings while compiling 2.6.9-rc3:
> sound/drivers/opl3/opl3_lib.c: In function `snd_opl3_cs4281_command':
> sound/drivers/opl3/opl3_lib.c:101: warning: passing arg 2 of `writel' makes pointer from integer without a cast
> sound/drivers/opl3/opl3_lib.c:104: warning: passing arg 2 of `writel' makes pointer from integer without a cast
>
> Hope this fix is correct.
It looks very odd. At the very least we don't want to overload the
fields in question (->r_port and ->l_port) that way.
On Thu, Sep 30, 2004 at 04:25:44PM +0100, [email protected] wrote:
> On Thu, Sep 30, 2004 at 02:28:53PM +0200, Borislav Petkov wrote:
> > Hi there,
> > I get these warnings while compiling 2.6.9-rc3:
> > sound/drivers/opl3/opl3_lib.c: In function `snd_opl3_cs4281_command':
> > sound/drivers/opl3/opl3_lib.c:101: warning: passing arg 2 of `writel' makes pointer from integer without a cast
> > sound/drivers/opl3/opl3_lib.c:104: warning: passing arg 2 of `writel' makes pointer from integer without a cast
> >
> > Hope this fix is correct.
>
> It looks very odd. At the very least we don't want to overload the
> fields in question (->r_port and ->l_port) that way.
*Yuck*
ALSA code, as pretty as ever. No, that's not a fix; it's only shutting the
rightfully complaining compiler up.
What happens there is a dirty kludge created for the benefit of a single
driver (sound/pci/cs4281.c). Said driver has a bunch of registers
memory-mapped, while its relatives use port IO instead. Driver does
(correctly) ioremap(); then it overloads the arguments of snd_opl3_create()
normally used for port numbers and shoves *address obtained from ioremap
and divided by 4* in them.
Sigh... At the very least that kind of abuse should stop. FWIW, I would
suggest having cs4281.c set the ->command() directly and killing that crap
with ->l_port/->r_port overloading.
At Thu, 30 Sep 2004 16:52:28 +0100,
[email protected] wrote:
>
> On Thu, Sep 30, 2004 at 04:25:44PM +0100, [email protected] wrote:
> > On Thu, Sep 30, 2004 at 02:28:53PM +0200, Borislav Petkov wrote:
> > > Hi there,
> > > I get these warnings while compiling 2.6.9-rc3:
> > > sound/drivers/opl3/opl3_lib.c: In function `snd_opl3_cs4281_command':
> > > sound/drivers/opl3/opl3_lib.c:101: warning: passing arg 2 of `writel' makes pointer from integer without a cast
> > > sound/drivers/opl3/opl3_lib.c:104: warning: passing arg 2 of `writel' makes pointer from integer without a cast
> > >
> > > Hope this fix is correct.
> >
> > It looks very odd. At the very least we don't want to overload the
> > fields in question (->r_port and ->l_port) that way.
>
> *Yuck*
>
> ALSA code, as pretty as ever. No, that's not a fix; it's only shutting the
> rightfully complaining compiler up.
>
> What happens there is a dirty kludge created for the benefit of a single
> driver (sound/pci/cs4281.c). Said driver has a bunch of registers
> memory-mapped, while its relatives use port IO instead. Driver does
> (correctly) ioremap(); then it overloads the arguments of snd_opl3_create()
> normally used for port numbers and shoves *address obtained from ioremap
> and divided by 4* in them.
This ugly shift was already removed in the current version
in linux-sound bk. The l_port and r_port point the iomem pointers now
on cs4281 like others. I don't know why the author of cs4281
implemented in such a way.
BTW, all __iomem fixes are already there, too.
> Sigh... At the very least that kind of abuse should stop. FWIW, I would
> suggest having cs4281.c set the ->command() directly and killing that crap
> with ->l_port/->r_port overloading.
Yes, it'd be definitely better.
Will work on it.
Takashi
At Thu, 30 Sep 2004 18:07:10 +0200,
I wrote:
>
> > Sigh... At the very least that kind of abuse should stop. FWIW, I would
> > suggest having cs4281.c set the ->command() directly and killing that crap
> > with ->l_port/->r_port overloading.
>
> Yes, it'd be definitely better.
> Will work on it.
The patch below.
--
Takashi Iwai <[email protected]> ALSA Developer - http://www.alsa-project.org
==
Summary: Fix / clean up OPL3 for CS4281
Moved cs4281-specific code into cs4281 driver from opl3.
The ugly type-casting is removed now.
The opl3 instance can be created via snd_opl3_new() (followed by
snd_opl3_init()) to allow the driver to set its own command and
private_data/private_free.
snd_opl3_create() is kept for compatibility as it was.
Signed-off-by: Takashi Iwai <[email protected]>
--- linux/include/sound/opl3.h 2003-03-25 16:13:46.000000000 +0100
+++ linux/include/sound/opl3.h 2004-09-30 18:25:00.000000000 +0200
@@ -274,6 +274,9 @@
snd_timer_t *timer2;
spinlock_t timer_lock;
+ void *private_data;
+ void (*private_free)(opl3_t *);
+
spinlock_t reg_lock;
snd_card_t *card; /* The card that this belongs to */
int used; /* usage flag - exclusive */
@@ -314,6 +317,8 @@
/* opl3.c */
void snd_opl3_interrupt(snd_hwdep_t * hw);
+int snd_opl3_new(snd_card_t *card, unsigned short hardware, opl3_t **ropl3);
+int snd_opl3_init(opl3_t *opl3);
int snd_opl3_create(snd_card_t * card,
unsigned long l_port, unsigned long r_port,
unsigned short hardware,
--- linux/sound/drivers/opl3/opl3_lib.c 2004-09-16 19:34:18.000000000 +0200
+++ linux/sound/drivers/opl3/opl3_lib.c 2004-09-30 18:23:28.000000000 +0200
@@ -85,28 +85,6 @@
spin_unlock_irqrestore(&opl3->reg_lock, flags);
}
-void snd_opl3_cs4281_command(opl3_t * opl3, unsigned short cmd, unsigned char val)
-{
- unsigned long flags;
- void __iomem *port;
-
- /*
- * CS4281 requires a special access to I/O registers
- */
-
- port = (void __iomem *)((cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port);
-
- spin_lock_irqsave(&opl3->reg_lock, flags);
-
- writel((unsigned int)cmd, port);
- udelay(10);
-
- writel((unsigned int)val, port + 4);
- udelay(30);
-
- spin_unlock_irqrestore(&opl3->reg_lock, flags);
-}
-
static int snd_opl3_detect(opl3_t * opl3)
{
/*
@@ -344,6 +322,9 @@
static int snd_opl3_free(opl3_t *opl3)
{
+ snd_assert(opl3 != NULL, return -ENXIO);
+ if (opl3->private_free)
+ opl3->private_free(opl3);
if (opl3->res_l_port) {
release_resource(opl3->res_l_port);
kfree_nocheck(opl3->res_l_port);
@@ -362,51 +343,89 @@
return snd_opl3_free(opl3);
}
-int snd_opl3_create(snd_card_t * card,
- unsigned long l_port,
- unsigned long r_port,
- unsigned short hardware,
- int integrated,
- opl3_t ** ropl3)
+int snd_opl3_new(snd_card_t *card,
+ unsigned short hardware,
+ opl3_t **ropl3)
{
- opl3_t *opl3;
- int err;
static snd_device_ops_t ops = {
.dev_free = snd_opl3_dev_free,
};
+ opl3_t *opl3;
+ int err;
*ropl3 = NULL;
-
opl3 = kcalloc(1, sizeof(*opl3), GFP_KERNEL);
if (opl3 == NULL)
return -ENOMEM;
- if (integrated)
- goto __step1; /* ports are already reserved */
+ opl3->card = card;
+ opl3->hardware = hardware;
+ spin_lock_init(&opl3->reg_lock);
+ spin_lock_init(&opl3->timer_lock);
+ init_MUTEX(&opl3->access_mutex);
- if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
- snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
+ if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, opl3, &ops)) < 0) {
snd_opl3_free(opl3);
- return -EBUSY;
+ return err;
}
- if (r_port != 0 &&
- (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
- snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
- snd_opl3_free(opl3);
- return -EBUSY;
+
+ *ropl3 = opl3;
+ return 0;
+}
+
+int snd_opl3_init(opl3_t *opl3)
+{
+ if (! opl3->command) {
+ printk(KERN_ERR "snd_opl3_init: command not defined!\n");
+ return -EINVAL;
}
- __step1:
+ opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
+ /* Melodic mode */
+ opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00);
- opl3->card = card;
- opl3->hardware = hardware;
+ switch (opl3->hardware & OPL3_HW_MASK) {
+ case OPL3_HW_OPL2:
+ opl3->max_voices = MAX_OPL2_VOICES;
+ break;
+ case OPL3_HW_OPL3:
+ case OPL3_HW_OPL4:
+ opl3->max_voices = MAX_OPL3_VOICES;
+ /* Enter OPL3 mode */
+ opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE);
+ }
+ return 0;
+}
+
+int snd_opl3_create(snd_card_t * card,
+ unsigned long l_port,
+ unsigned long r_port,
+ unsigned short hardware,
+ int integrated,
+ opl3_t ** ropl3)
+{
+ opl3_t *opl3;
+ int err;
+
+ *ropl3 = NULL;
+ if ((err = snd_opl3_new(card, hardware, &opl3)) < 0)
+ return err;
+ if (! integrated) {
+ if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
+ snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
+ snd_opl3_free(opl3);
+ return -EBUSY;
+ }
+ if (r_port != 0 &&
+ (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
+ snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
+ snd_opl3_free(opl3);
+ return -EBUSY;
+ }
+ }
opl3->l_port = l_port;
opl3->r_port = r_port;
- spin_lock_init(&opl3->reg_lock);
- spin_lock_init(&opl3->timer_lock);
- init_MUTEX(&opl3->access_mutex);
-
switch (opl3->hardware) {
/* some hardware doesn't support timers */
case OPL3_HW_OPL3_SV:
@@ -414,9 +433,6 @@
case OPL3_HW_OPL3_FM801:
opl3->command = &snd_opl3_command;
break;
- case OPL3_HW_OPL3_CS4281:
- opl3->command = &snd_opl3_cs4281_command;
- break;
default:
opl3->command = &snd_opl2_command;
if ((err = snd_opl3_detect(opl3)) < 0) {
@@ -433,23 +449,7 @@
}
}
- opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
- opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00); /* Melodic mode */
-
- switch (opl3->hardware & OPL3_HW_MASK) {
- case OPL3_HW_OPL2:
- opl3->max_voices = MAX_OPL2_VOICES;
- break;
- case OPL3_HW_OPL3:
- case OPL3_HW_OPL4:
- opl3->max_voices = MAX_OPL3_VOICES;
- snd_assert(opl3->r_port != 0, snd_opl3_free(opl3); return -ENODEV);
- opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE); /* Enter OPL3 mode */
- }
- if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, opl3, &ops)) < 0) {
- snd_opl3_free(opl3);
- return err;
- }
+ snd_opl3_init(opl3);
*ropl3 = opl3;
return 0;
@@ -531,6 +531,8 @@
}
EXPORT_SYMBOL(snd_opl3_interrupt);
+EXPORT_SYMBOL(snd_opl3_new);
+EXPORT_SYMBOL(snd_opl3_init);
EXPORT_SYMBOL(snd_opl3_create);
EXPORT_SYMBOL(snd_opl3_timer_new);
EXPORT_SYMBOL(snd_opl3_hwdep_new);
--- linux/sound/pci/cs4281.c 2004-09-16 19:35:30.000000000 +0200
+++ linux/sound/pci/cs4281.c 2004-09-30 18:30:29.000000000 +0200
@@ -1914,6 +1914,31 @@
}
+/*
+ * OPL3 command
+ */
+static void snd_cs4281_opl3_command(opl3_t * opl3, unsigned short cmd, unsigned char val)
+{
+ unsigned long flags;
+ cs4281_t *chip = opl3->private_data;
+ void __iomem *port;
+
+ if (cmd & OPL3_RIGHT)
+ port = chip->ba0 + BA0_B1AP; /* right port */
+ else
+ port = chip->ba0 + BA0_B0AP; /* left port */
+
+ spin_lock_irqsave(&opl3->reg_lock, flags);
+
+ writel((unsigned int)cmd, port);
+ udelay(10);
+
+ writel((unsigned int)val, port + 4);
+ udelay(30);
+
+ spin_unlock_irqrestore(&opl3->reg_lock, flags);
+}
+
static int __devinit snd_cs4281_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
@@ -1951,13 +1976,13 @@
snd_card_free(card);
return err;
}
- if ((err = snd_opl3_create(card,
- (unsigned long)(chip->ba0 + BA0_B0AP),
- (unsigned long)(chip->ba0 + BA0_B1AP),
- OPL3_HW_OPL3_CS4281, 1, &opl3)) < 0) {
+ if ((err = snd_opl3_new(card, OPL3_HW_OPL3_CS4281, &opl3)) < 0) {
snd_card_free(card);
return err;
}
+ opl3->private_data = chip;
+ opl3->command = snd_cs4281_opl3_command;
+ snd_opl3_init(opl3);
if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
snd_card_free(card);
return err;
At Thu, 30 Sep 2004 18:50:25 +0200,
I wrote:
>
> At Thu, 30 Sep 2004 18:07:10 +0200,
> I wrote:
> >
> > > Sigh... At the very least that kind of abuse should stop. FWIW, I would
> > > suggest having cs4281.c set the ->command() directly and killing that crap
> > > with ->l_port/->r_port overloading.
> >
> > Yes, it'd be definitely better.
> > Will work on it.
>
> The patch below.
Oh, the last one was for linux-sound bk.
The patch to 2.6.9-rc3 is below.
Takashi
--- linux-2.6.9-rc3/include/sound/opl3.h 2004-08-14 12:54:50.000000000 +0200
+++ linux/include/sound/opl3.h 2004-09-30 18:25:00.000000000 +0200
@@ -274,6 +274,9 @@
snd_timer_t *timer2;
spinlock_t timer_lock;
+ void *private_data;
+ void (*private_free)(opl3_t *);
+
spinlock_t reg_lock;
snd_card_t *card; /* The card that this belongs to */
int used; /* usage flag - exclusive */
@@ -314,6 +317,8 @@
/* opl3.c */
void snd_opl3_interrupt(snd_hwdep_t * hw);
+int snd_opl3_new(snd_card_t *card, unsigned short hardware, opl3_t **ropl3);
+int snd_opl3_init(opl3_t *opl3);
int snd_opl3_create(snd_card_t * card,
unsigned long l_port, unsigned long r_port,
unsigned short hardware,
--- linux-2.6.9-rc3/sound/drivers/opl3/opl3_lib.c 2004-09-30 19:04:07.496702568 +0200
+++ linux/sound/drivers/opl3/opl3_lib.c 2004-09-30 18:23:28.000000000 +0200
@@ -85,28 +85,6 @@
spin_unlock_irqrestore(&opl3->reg_lock, flags);
}
-void snd_opl3_cs4281_command(opl3_t * opl3, unsigned short cmd, unsigned char val)
-{
- unsigned long flags;
- unsigned long port;
-
- /*
- * CS4281 requires a special access to I/O registers
- */
-
- port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
-
- spin_lock_irqsave(&opl3->reg_lock, flags);
-
- writel((unsigned int)cmd, port << 2);
- udelay(10);
-
- writel((unsigned int)val, (port + 1) << 2);
- udelay(30);
-
- spin_unlock_irqrestore(&opl3->reg_lock, flags);
-}
-
static int snd_opl3_detect(opl3_t * opl3)
{
/*
@@ -344,6 +322,9 @@
static int snd_opl3_free(opl3_t *opl3)
{
+ snd_assert(opl3 != NULL, return -ENXIO);
+ if (opl3->private_free)
+ opl3->private_free(opl3);
if (opl3->res_l_port) {
release_resource(opl3->res_l_port);
kfree_nocheck(opl3->res_l_port);
@@ -362,51 +343,89 @@
return snd_opl3_free(opl3);
}
-int snd_opl3_create(snd_card_t * card,
- unsigned long l_port,
- unsigned long r_port,
- unsigned short hardware,
- int integrated,
- opl3_t ** ropl3)
+int snd_opl3_new(snd_card_t *card,
+ unsigned short hardware,
+ opl3_t **ropl3)
{
- opl3_t *opl3;
- int err;
static snd_device_ops_t ops = {
.dev_free = snd_opl3_dev_free,
};
+ opl3_t *opl3;
+ int err;
*ropl3 = NULL;
-
opl3 = kcalloc(1, sizeof(*opl3), GFP_KERNEL);
if (opl3 == NULL)
return -ENOMEM;
- if (integrated)
- goto __step1; /* ports are already reserved */
+ opl3->card = card;
+ opl3->hardware = hardware;
+ spin_lock_init(&opl3->reg_lock);
+ spin_lock_init(&opl3->timer_lock);
+ init_MUTEX(&opl3->access_mutex);
- if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
- snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
+ if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, opl3, &ops)) < 0) {
snd_opl3_free(opl3);
- return -EBUSY;
+ return err;
}
- if (r_port != 0 &&
- (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
- snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
- snd_opl3_free(opl3);
- return -EBUSY;
+
+ *ropl3 = opl3;
+ return 0;
+}
+
+int snd_opl3_init(opl3_t *opl3)
+{
+ if (! opl3->command) {
+ printk(KERN_ERR "snd_opl3_init: command not defined!\n");
+ return -EINVAL;
}
- __step1:
+ opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
+ /* Melodic mode */
+ opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00);
- opl3->card = card;
- opl3->hardware = hardware;
+ switch (opl3->hardware & OPL3_HW_MASK) {
+ case OPL3_HW_OPL2:
+ opl3->max_voices = MAX_OPL2_VOICES;
+ break;
+ case OPL3_HW_OPL3:
+ case OPL3_HW_OPL4:
+ opl3->max_voices = MAX_OPL3_VOICES;
+ /* Enter OPL3 mode */
+ opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE);
+ }
+ return 0;
+}
+
+int snd_opl3_create(snd_card_t * card,
+ unsigned long l_port,
+ unsigned long r_port,
+ unsigned short hardware,
+ int integrated,
+ opl3_t ** ropl3)
+{
+ opl3_t *opl3;
+ int err;
+
+ *ropl3 = NULL;
+ if ((err = snd_opl3_new(card, hardware, &opl3)) < 0)
+ return err;
+ if (! integrated) {
+ if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
+ snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
+ snd_opl3_free(opl3);
+ return -EBUSY;
+ }
+ if (r_port != 0 &&
+ (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
+ snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
+ snd_opl3_free(opl3);
+ return -EBUSY;
+ }
+ }
opl3->l_port = l_port;
opl3->r_port = r_port;
- spin_lock_init(&opl3->reg_lock);
- spin_lock_init(&opl3->timer_lock);
- init_MUTEX(&opl3->access_mutex);
-
switch (opl3->hardware) {
/* some hardware doesn't support timers */
case OPL3_HW_OPL3_SV:
@@ -414,9 +433,6 @@
case OPL3_HW_OPL3_FM801:
opl3->command = &snd_opl3_command;
break;
- case OPL3_HW_OPL3_CS4281:
- opl3->command = &snd_opl3_cs4281_command;
- break;
default:
opl3->command = &snd_opl2_command;
if ((err = snd_opl3_detect(opl3)) < 0) {
@@ -433,23 +449,7 @@
}
}
- opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
- opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00); /* Melodic mode */
-
- switch (opl3->hardware & OPL3_HW_MASK) {
- case OPL3_HW_OPL2:
- opl3->max_voices = MAX_OPL2_VOICES;
- break;
- case OPL3_HW_OPL3:
- case OPL3_HW_OPL4:
- opl3->max_voices = MAX_OPL3_VOICES;
- snd_assert(opl3->r_port != 0, snd_opl3_free(opl3); return -ENODEV);
- opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE); /* Enter OPL3 mode */
- }
- if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, opl3, &ops)) < 0) {
- snd_opl3_free(opl3);
- return err;
- }
+ snd_opl3_init(opl3);
*ropl3 = opl3;
return 0;
@@ -531,6 +531,8 @@
}
EXPORT_SYMBOL(snd_opl3_interrupt);
+EXPORT_SYMBOL(snd_opl3_new);
+EXPORT_SYMBOL(snd_opl3_init);
EXPORT_SYMBOL(snd_opl3_create);
EXPORT_SYMBOL(snd_opl3_timer_new);
EXPORT_SYMBOL(snd_opl3_hwdep_new);
--- linux-2.6.9-rc3/sound/pci/cs4281.c 2004-09-30 19:04:07.778638858 +0200
+++ linux/sound/pci/cs4281.c 2004-09-30 18:30:29.000000000 +0200
@@ -464,8 +464,8 @@
struct snd_cs4281 {
int irq;
- unsigned long ba0; /* virtual (accessible) address */
- unsigned long ba1; /* virtual (accessible) address */
+ void __iomem *ba0; /* virtual (accessible) address */
+ void __iomem *ba1; /* virtual (accessible) address */
unsigned long ba0_addr;
unsigned long ba1_addr;
@@ -1359,9 +1359,9 @@
if (chip->irq >= 0)
free_irq(chip->irq, (void *)chip);
if (chip->ba0)
- iounmap((void *) chip->ba0);
+ iounmap(chip->ba0);
if (chip->ba1)
- iounmap((void *) chip->ba1);
+ iounmap(chip->ba1);
pci_release_regions(chip->pci);
kfree(chip);
@@ -1423,8 +1423,8 @@
}
chip->irq = pci->irq;
- chip->ba0 = (unsigned long) ioremap_nocache(chip->ba0_addr, pci_resource_len(pci, 0));
- chip->ba1 = (unsigned long) ioremap_nocache(chip->ba1_addr, pci_resource_len(pci, 1));
+ chip->ba0 = ioremap_nocache(chip->ba0_addr, pci_resource_len(pci, 0));
+ chip->ba1 = ioremap_nocache(chip->ba1_addr, pci_resource_len(pci, 1));
if (!chip->ba0 || !chip->ba1) {
snd_cs4281_free(chip);
return -ENOMEM;
@@ -1914,6 +1914,31 @@
}
+/*
+ * OPL3 command
+ */
+static void snd_cs4281_opl3_command(opl3_t * opl3, unsigned short cmd, unsigned char val)
+{
+ unsigned long flags;
+ cs4281_t *chip = opl3->private_data;
+ void __iomem *port;
+
+ if (cmd & OPL3_RIGHT)
+ port = chip->ba0 + BA0_B1AP; /* right port */
+ else
+ port = chip->ba0 + BA0_B0AP; /* left port */
+
+ spin_lock_irqsave(&opl3->reg_lock, flags);
+
+ writel((unsigned int)cmd, port);
+ udelay(10);
+
+ writel((unsigned int)val, port + 4);
+ udelay(30);
+
+ spin_unlock_irqrestore(&opl3->reg_lock, flags);
+}
+
static int __devinit snd_cs4281_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
@@ -1951,13 +1976,13 @@
snd_card_free(card);
return err;
}
- if ((err = snd_opl3_create(card,
- (chip->ba0 + BA0_B0AP) >> 2,
- (chip->ba0 + BA0_B1AP) >> 2,
- OPL3_HW_OPL3_CS4281, 1, &opl3)) < 0) {
+ if ((err = snd_opl3_new(card, OPL3_HW_OPL3_CS4281, &opl3)) < 0) {
snd_card_free(card);
return err;
}
+ opl3->private_data = chip;
+ opl3->command = snd_cs4281_opl3_command;
+ snd_opl3_init(opl3);
if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
snd_card_free(card);
return err;
On Thursday 30 September 2004 18:07, Takashi Iwai wrote:
> At Thu, 30 Sep 2004 16:52:28 +0100,
>
> [email protected] wrote:
> > On Thu, Sep 30, 2004 at 04:25:44PM +0100,
[email protected] wrote:
> > > On Thu, Sep 30, 2004 at 02:28:53PM +0200, Borislav Petkov wrote:
> > > > Hi there,
> > > > I get these warnings while compiling 2.6.9-rc3:
> > > > sound/drivers/opl3/opl3_lib.c: In function
> > > > `snd_opl3_cs4281_command': sound/drivers/opl3/opl3_lib.c:101:
> > > > warning: passing arg 2 of `writel' makes pointer from integer
> > > > without a cast sound/drivers/opl3/opl3_lib.c:104: warning: passing
> > > > arg 2 of `writel' makes pointer from integer without a cast
> > > >
> > > > Hope this fix is correct.
> > >
> > > It looks very odd. At the very least we don't want to overload the
> > > fields in question (->r_port and ->l_port) that way.
> >
> > *Yuck*
> >
> > ALSA code, as pretty as ever. No, that's not a fix; it's only shutting
> > the rightfully complaining compiler up.
> >
> > What happens there is a dirty kludge created for the benefit of a single
> > driver (sound/pci/cs4281.c). Said driver has a bunch of registers
> > memory-mapped, while its relatives use port IO instead. Driver does
> > (correctly) ioremap(); then it overloads the arguments of
> > snd_opl3_create() normally used for port numbers and shoves *address
> > obtained from ioremap and divided by 4* in them.
>
> This ugly shift was already removed in the current version
> in linux-sound bk. The l_port and r_port point the iomem pointers now
> on cs4281 like others. I don't know why the author of cs4281
> implemented in such a way.
>
> BTW, all __iomem fixes are already there, too.
>
> > Sigh... At the very least that kind of abuse should stop. FWIW, I would
> > suggest having cs4281.c set the ->command() directly and killing that
> > crap with ->l_port/->r_port overloading.
>
> Yes, it'd be definitely better.
> Will work on it.
>
>
> Takashi
Ups,
tip of the iceberg, :) I actually thought that this would be too easy to be
true.
Regards,
Boris.