On 1/5/06, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15/2.6.15-mm1/
>
>
<!-- snip -->
Hi Andrew,
2.6.15-mm1 seems to be working less than perfect on my box.
Everything seems to be fine in console mode, but once I start X and
then login and KDE starts, the box locks up solid while loading KDE
(dies every time at the exact same spot, the "Initializing
peripherals" stage on the KDE splash screen).
Unfortunately not much makes it to the logs. The only things I can
find is this :
Jan 6 00:18:39 dragon kernel: [ 19.479000] Write protecting the
kernel read-only data: 333k
Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Signaled
System Error on 0000:00:18.2
Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Master Data
Parity Error on 0000:00:18.2
Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Detected
Parity Error on 0000:00:18.2
<<<here I power off the system since it's locked solid>>>
mainline 2.6.15 is rock solid.
Here are some details about my system (I included everything I could
think might be relevant, but please do ask if there's anything else
you need) and at the end my .config for 2.6.15-mm1 (based on the one I
use for 2.6.15 with 'make oldconfig') ;
note: all the following info was gathered while running my working
2.6.15 kernel, if it matters I can boot 2.6.15-mm1 in console mode and
gather the same or more - just let me know.
$ cat /etc/slackware-version
Slackware 10.2.0
$ scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux dragon 2.6.15 #1 SMP PREEMPT Tue Jan 3 20:44:46 CET 2006 i686
unknown unknown GNU/Linux
Gnu C 3.4.5
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.38
reiserfsprogs 3.6.19
quota-tools 3.12.
PPP 2.4.4b1
nfs-utils 1.0.7
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Linux C++ Library 6.0.3
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 064
Modules Loaded snd_seq_oss snd_seq_midi_event snd_seq
snd_pcm_oss snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi
snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_ac97_bus
snd_page_alloc snd_util_mem snd_hwdep snd agpgart
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 35
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping : 2
cpu MHz : 2200.324
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
bogomips : 4403.36
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 35
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping : 2
cpu MHz : 2200.324
cache size : 1024 KB
physical id : 127
siblings : 1
core id : 1
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
bogomips : 4399.53
$ cat /proc/meminfo
MemTotal: 2076028 kB
MemFree: 1756308 kB
Buffers: 20044 kB
Cached: 185928 kB
SwapCached: 0 kB
Active: 154844 kB
Inactive: 138172 kB
HighTotal: 1179328 kB
HighFree: 900900 kB
LowTotal: 896700 kB
LowFree: 855408 kB
SwapTotal: 763076 kB
SwapFree: 763076 kB
Dirty: 8 kB
Writeback: 0 kB
Mapped: 129336 kB
Slab: 13472 kB
CommitLimit: 1801088 kB
Committed_AS: 386364 kB
PageTables: 1228 kB
VmallocTotal: 114680 kB
VmallocUsed: 6496 kB
VmallocChunk: 108032 kB
# lspci -v
00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express
and HyperTransport]
Flags: bus master, fast devsel, latency 0
Capabilities: [40] #08 [0060]
Capabilities: [5c] #08 [a800]
Capabilities: [68] #08 [9000]
Capabilities: [74] #08 [8000]
Capabilities: [7c] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
00:01.0 PCI bridge: ALi Corporation: Unknown device 524b (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ff200000-ff2fffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Capabilities: [58] #10 [0141]
Capabilities: [7c] #08 [a800]
Capabilities: [88] #08 [8825]
00:02.0 PCI bridge: ALi Corporation: Unknown device 524c (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ff300000-ff3fffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Capabilities: [58] #10 [0141]
Capabilities: [7c] #08 [a800]
Capabilities: [88] #08 [8825]
00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
Flags: bus master, fast devsel, latency 0
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] #08 [0024]
Capabilities: [60] #08 [8038]
Capabilities: [80] AGP version 3.0
00:05.0 PCI bridge: ALi Corporation AGP8X Controller (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: ff400000-ff4fffff
Prefetchable memory behind bridge: c7f00000-d7efffff
00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if
01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: 88000000-880fffff
00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
Subsystem: ASRock Incorporation: Unknown device 1563
Flags: bus master, medium devsel, latency 0
00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: ASRock Incorporation: Unknown device 7101
Flags: medium devsel
00:11.0 Ethernet controller: ALi Corporation M5263 Ethernet Controller (rev 40)
Subsystem: ASRock Incorporation: Unknown device 5263
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at e800 [size=256]
Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if 8a
[Master SecP PriP])
Subsystem: ASRock Incorporation: Unknown device 5229
Flags: bus master, 66Mhz, medium devsel, latency 32
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at ff00 [size=16]
00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation: Unknown device 5237
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation: Unknown device 5237
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 3
Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation: Unknown device 5237
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K]
00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation: Unknown device 5239
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
Memory at ff6ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2090]
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] #08 [2101]
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA Parhelia
AGP (rev 03) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Parhelia 128Mb
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
Memory at c8000000 (32-bit, prefetchable) [size=128M]
Memory at ff4fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at ff4c0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
04:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs SBLive! 5.1 eMicro 28028
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at d880 [size=32]
Capabilities: [dc] Power Management version 1
04:05.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at dc00 [size=8]
Capabilities: [dc] Power Management version 1
04:06.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 19
BIST result: 00
I/O ports at d400 [disabled] [size=256]
Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
04:07.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 42)
Subsystem: D-Link System Inc DFE-530TX rev B
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at d000 [size=256]
Memory at ff5fec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 88020000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: IBM Model: DDYS-T36950N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
# cat /proc/cmdline
BOOT_IMAGE=2.6.15 ro root=801 pci=usepirqmask
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-mm1
# Thu Jan 5 23:53:51 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=200
CONFIG_AIC7XXX_RESET_DELAY_MS=15001
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
CONFIG_SPI_ARCH_HAS_MASTER=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_IP is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=865
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On 1/6/06, Jesper Juhl <[email protected]> wrote:
> On 1/5/06, Andrew Morton <[email protected]> wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15/2.6.15-mm1/
> >
> >
> <!-- snip -->
>
> Hi Andrew,
>
> 2.6.15-mm1 seems to be working less than perfect on my box.
>
<snip original mail>
Whoops, forgot to include dmesg info (taken from /var/log/messages).
This is from boot until crash of my last 2.6.15-mm1 boot.
Jan 6 00:18:39 dragon kernel: [ 0.000000] Linux version 2.6.15-mm1
(juhl@dragon) (gcc version 3.4.5) #1 SMP PREEMPT Fri Jan 6 00:01:50
CET 2006
Jan 6 00:18:39 dragon kernel: [ 0.000000] BIOS-provided physical RAM map:
Jan 6 00:18:39 dragon kernel: [ 0.000000] 1151MB HIGHMEM available.
Jan 6 00:18:39 dragon kernel: [ 0.000000] 896MB LOWMEM available.
Jan 6 00:18:39 dragon kernel: [ 0.000000] found SMP MP-table at 000ff780
Jan 6 00:18:39 dragon kernel: [ 0.000000] DMI 2.3 present.
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x00] enabled)
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x01] enabled)
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: IOAPIC (id[0x03]
address[0xfec10000] gsi_base[24])
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
Jan 6 00:18:39 dragon kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 low level)
Jan 6 00:18:39 dragon kernel: [ 0.000000] Using ACPI (MADT) for
SMP configuration information
Jan 6 00:18:39 dragon kernel: [ 30.291133] Enabling fast FPU save
and restore... done.
Jan 6 00:18:39 dragon kernel: [ 30.291135] Enabling unmasked SIMD
FPU exception support... done.
Jan 6 00:18:39 dragon kernel: [ 30.291138] Initializing CPU#0
Jan 6 00:18:39 dragon kernel: [ 30.291142] Kernel command line:
BOOT_IMAGE=2.6.15-mm1 ro root=801 pci=usepirqmask
Jan 6 00:18:39 dragon kernel: [ 31.092058] Memory:
2074832k/2096832k available (2136k kernel code, 20832k reserved, 868k
data, 208k init, 1179328k highmem)
Jan 6 00:18:39 dragon kernel: [ 31.151513] CPU: L1 I Cache: 64K (64
bytes/line), D cache 64K (64 bytes/line)
Jan 6 00:18:39 dragon kernel: [ 31.151517] CPU: L2 Cache: 1024K (64
bytes/line)
Jan 6 00:18:39 dragon kernel: [ 31.151520] CPU 0(2) -> Core 0
Jan 6 00:18:39 dragon kernel: [ 31.151528] Intel machine check
architecture supported.
Jan 6 00:18:39 dragon kernel: [ 31.151532] Intel machine check
reporting enabled on CPU#0.
Jan 6 00:18:39 dragon kernel: [ 31.151541] mtrr: v2.0 (20020519)
Jan 6 00:18:39 dragon kernel: [ 31.151547] Checking 'hlt' instruction... OK.
Jan 6 00:18:39 dragon kernel: [ 31.167918] Initializing CPU#1
Jan 6 00:18:39 dragon kernel: [ 31.228356] CPU: L1 I Cache: 64K (64
bytes/line), D cache 64K (64 bytes/line)
Jan 6 00:18:39 dragon kernel: [ 31.228357] CPU: L2 Cache: 1024K (64
bytes/line)
Jan 6 00:18:39 dragon kernel: [ 31.228359] CPU 1(2) -> Core 1
Jan 6 00:18:39 dragon kernel: [ 31.228364] Intel machine check
architecture supported.
Jan 6 00:18:39 dragon kernel: [ 31.228366] Intel machine check
reporting enabled on CPU#1.
Jan 6 00:18:39 dragon kernel: [ 31.228495] Total of 2 processors
activated (8801.21 BogoMIPS).
Jan 6 00:18:39 dragon kernel: [ 31.229078] ..TIMER: vector=0x31
apic1=0 pin1=2 apic2=-1 pin2=-1
Jan 6 00:18:39 dragon kernel: [ 31.340174] checking TSC
synchronization across 2 CPUs:
Jan 6 00:18:39 dragon kernel: [ 0.000002] CPU#0 had 0 usecs TSC
skew, fixed it up.
Jan 6 00:18:39 dragon kernel: [ 0.000005] CPU#1 had 0 usecs TSC
skew, fixed it up.
Jan 6 00:18:39 dragon kernel: [ 0.000996] Brought up 2 CPUs
Jan 6 00:18:39 dragon kernel: [ 0.144949] NET: Registered protocol family 16
Jan 6 00:18:39 dragon kernel: [ 0.144975] ACPI: bus type pci registered
Jan 6 00:18:39 dragon kernel: [ 0.145337] PCI: PCI BIOS revision
3.00 entry at 0xf0031, last bus=4
Jan 6 00:18:39 dragon kernel: [ 0.145345] PCI: Using configuration type 1
Jan 6 00:18:39 dragon kernel: [ 0.145505] ACPI: Subsystem revision 20051216
Jan 6 00:18:39 dragon kernel: [ 0.148985] ACPI: Interpreter enabled
Jan 6 00:18:39 dragon kernel: [ 0.148992] ACPI: Using IOAPIC for
interrupt routing
Jan 6 00:18:39 dragon kernel: [ 0.149711] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Jan 6 00:18:39 dragon kernel: [ 0.152491] PCI: Transparent bridge
- 0000:00:06.0
Jan 6 00:18:39 dragon kernel: [ 0.172120] SCSI subsystem initialized
Jan 6 00:18:39 dragon kernel: [ 0.172128] PCI: Using ACPI for IRQ routing
Jan 6 00:18:39 dragon kernel: [ 0.172132] PCI: If a device doesn't
work, try "pci=routeirq". If it helps, post a report
Jan 6 00:18:39 dragon kernel: [ 0.180365] PCI: Bridge: 0000:00:01.0
Jan 6 00:18:39 dragon kernel: [ 0.180368] IO window: disabled.
Jan 6 00:18:39 dragon kernel: [ 0.180373] MEM window: ff200000-ff2fffff
Jan 6 00:18:39 dragon kernel: [ 0.180376] PREFETCH window: disabled.
Jan 6 00:18:39 dragon kernel: [ 0.180381] PCI: Bridge: 0000:00:02.0
Jan 6 00:18:39 dragon kernel: [ 0.180383] IO window: disabled.
Jan 6 00:18:39 dragon kernel: [ 0.180387] MEM window: ff300000-ff3fffff
Jan 6 00:18:39 dragon kernel: [ 0.180391] PREFETCH window: disabled.
Jan 6 00:18:39 dragon kernel: [ 0.180395] PCI: Bridge: 0000:00:05.0
Jan 6 00:18:39 dragon kernel: [ 0.180397] IO window: disabled.
Jan 6 00:18:39 dragon kernel: [ 0.180403] MEM window: ff400000-ff4fffff
Jan 6 00:18:39 dragon kernel: [ 0.180408] PREFETCH window:
c7f00000-d7efffff
Jan 6 00:18:39 dragon kernel: [ 0.180415] PCI: Bridge: 0000:00:06.0
Jan 6 00:18:39 dragon kernel: [ 0.180419] IO window: d000-dfff
Jan 6 00:18:39 dragon kernel: [ 0.180425] MEM window: ff500000-ff5fffff
Jan 6 00:18:39 dragon kernel: [ 0.180430] PREFETCH window:
88000000-880fffff
Jan 6 00:18:39 dragon kernel: [ 0.180443] ACPI: PCI Interrupt
0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 16
Jan 6 00:18:39 dragon kernel: [ 0.180457] ACPI: PCI Interrupt
0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 17
Jan 6 00:18:39 dragon kernel: [ 0.396000] Machine check exception
polling timer started.
Jan 6 00:18:39 dragon kernel: [ 0.396000] apm: BIOS version 1.2
Flags 0x02 (Driver version 1.16ac)
Jan 6 00:18:39 dragon kernel: [ 0.396000] apm: disabled - APM is
not SMP safe.
Jan 6 00:18:39 dragon kernel: [ 0.397000] io scheduler noop registered
Jan 6 00:18:39 dragon kernel: [ 0.397000] io scheduler
anticipatory registered
Jan 6 00:18:39 dragon kernel: [ 0.397000] vesafb: framebuffer at
0xc8000000, mapped to 0xf8880000, using 3072k, total 16384k
Jan 6 00:18:39 dragon kernel: [ 0.397000] vesafb: mode is
1024x768x16, linelength=2048, pages=9
Jan 6 00:18:39 dragon kernel: [ 0.397000] vesafb: protected mode
interface info at c000:7880
Jan 6 00:18:39 dragon kernel: [ 0.397000] vesafb: scrolling: redraw
Jan 6 00:18:39 dragon kernel: [ 0.397000] vesafb: Truecolor:
size=0:5:6:5, shift=0:11:5:0
Jan 6 00:18:39 dragon kernel: [ 0.408000] Time: tsc clocksource
has been installed.
Jan 6 00:18:39 dragon kernel: [ 0.460000] Time: pit clocksource
has been installed.
Jan 6 00:18:39 dragon kernel: [ 0.549000] fb0: VESA VGA frame buffer device
Jan 6 00:18:39 dragon kernel: [ 0.552000] Real Time Clock Driver v1.12
Jan 6 00:18:39 dragon kernel: [ 0.554000] serio: i8042 AUX port at
0x60,0x64 irq 12
Jan 6 00:18:39 dragon kernel: [ 0.555000] serio: i8042 KBD port at
0x60,0x64 irq 1
Jan 6 00:18:39 dragon kernel: [ 0.555000] Serial: 8250/16550
driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
Jan 6 00:18:39 dragon kernel: [ 0.557000] serial8250: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
Jan 6 00:18:39 dragon kernel: [ 0.558000] Floppy drive(s): fd0 is 1.44M
Jan 6 00:18:39 dragon kernel: [ 0.572000] FDC 0 is a post-1991 82077
Jan 6 00:18:39 dragon kernel: [ 0.574000]
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Jan 6 00:18:39 dragon kernel: [ 0.575000] ACPI: PCI Interrupt
0000:04:07.0[A] -> GSI 22 (level, low) -> IRQ 18
Jan 6 00:18:39 dragon kernel: [ 0.576000] PCI: Via IRQ fixup for
0000:04:07.0, from 11 to 2
Jan 6 00:18:39 dragon kernel: [ 0.578000] eth0: VIA Rhine II at
0xff5fec00, 00:50:ba:f2:a3:1d, IRQ 18.
Jan 6 00:18:39 dragon kernel: [ 0.580000] eth0: MII PHY found at
address 8, status 0x782d advertising 01e1 Link 45e1.
Jan 6 00:18:39 dragon kernel: [ 0.581000] ACPI: PCI Interrupt
0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 19
Jan 6 00:18:39 dragon kernel: [ 0.792000] scsi0 : Adaptec AIC7XXX
EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
Jan 6 00:18:39 dragon kernel: [ 16.824000] Vendor: PIONEER
Model: DVD-ROM DVD-305 Rev: 1.03
Jan 6 00:18:39 dragon kernel: [ 16.852000] Type: CD-ROM
ANSI SCSI revision: 02
Jan 6 00:18:39 dragon kernel: [ 16.854000] target0:0:4: Beginning
Domain Validation
Jan 6 00:18:39 dragon kernel: [ 16.858000] target0:0:4: FAST-20
SCSI 20.0 MB/s ST (50 ns, offset 16)
Jan 6 00:18:39 dragon kernel: [ 16.888000] target0:0:4: Domain
Validation skipping write tests
Jan 6 00:18:39 dragon kernel: [ 16.890000] target0:0:4: Ending
Domain Validation
Jan 6 00:18:39 dragon kernel: [ 16.923000] Vendor: PLEXTOR
Model: CD-R PX-W1210S Rev: 1.01
Jan 6 00:18:39 dragon kernel: [ 16.926000] Type: CD-ROM
ANSI SCSI revision: 02
Jan 6 00:18:39 dragon kernel: [ 16.954000] target0:0:5: Beginning
Domain Validation
Jan 6 00:18:39 dragon kernel: [ 16.983000] target0:0:5: FAST-20
SCSI 20.0 MB/s ST (50 ns, offset 16)
Jan 6 00:18:39 dragon kernel: [ 17.012000] target0:0:5: Domain
Validation skipping write tests
Jan 6 00:18:39 dragon kernel: [ 17.013000] target0:0:5: Ending
Domain Validation
Jan 6 00:18:39 dragon kernel: [ 17.041000] Vendor: IBM
Model: DDYS-T36950N Rev: S96H
Jan 6 00:18:39 dragon kernel: [ 17.044000] Type: Direct-Access
ANSI SCSI revision: 03
Jan 6 00:18:39 dragon kernel: [ 17.073000] target0:0:6: Beginning
Domain Validation
Jan 6 00:18:39 dragon kernel: [ 17.077000] target0:0:6: wide asynchronous
Jan 6 00:18:39 dragon kernel: [ 17.106000] target0:0:6: FAST-80
WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
Jan 6 00:18:39 dragon kernel: [ 17.147000] target0:0:6: Ending
Domain Validation
Jan 6 00:18:39 dragon kernel: [ 19.200000] QLogic Fibre Channel HBA Driver
Jan 6 00:18:39 dragon kernel: [ 19.228000] SCSI device sda:
71687340 512-byte hdwr sectors (36704 MB)
Jan 6 00:18:39 dragon kernel: [ 19.230000] sda: Write Protect is off
Jan 6 00:18:39 dragon kernel: [ 19.258000] SCSI device sda: drive
cache: write back
Jan 6 00:18:39 dragon kernel: [ 19.260000] SCSI device sda:
71687340 512-byte hdwr sectors (36704 MB)
Jan 6 00:18:39 dragon kernel: [ 19.262000] sda: Write Protect is off
Jan 6 00:18:39 dragon kernel: [ 19.291000] SCSI device sda: drive
cache: write back
Jan 6 00:18:39 dragon kernel: [ 19.318000] sda: sda1 sda2 sda3 sda4
Jan 6 00:18:39 dragon kernel: [ 19.335000] sd 0:0:6:0: Attached scsi disk sda
Jan 6 00:18:39 dragon kernel: [ 19.344000] Uniform CD-ROM driver
Revision: 3.20
Jan 6 00:18:39 dragon kernel: [ 19.351000] sr 0:0:4:0: Attached
scsi generic sg0 type 5
Jan 6 00:18:39 dragon kernel: [ 19.379000] sr 0:0:5:0: Attached
scsi generic sg1 type 5
Jan 6 00:18:39 dragon kernel: [ 19.380000] sd 0:0:6:0: Attached
scsi generic sg2 type 0
Jan 6 00:18:39 dragon kernel: [ 19.381000] mice: PS/2 mouse device
common for all mice
Jan 6 00:18:39 dragon kernel: [ 19.382000] MC:
drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Jan 5 2006
Jan 6 00:18:39 dragon kernel: [ 19.409000] NET: Registered protocol family 2
Jan 6 00:18:39 dragon kernel: [ 19.416000] input: AT Translated Set
2 keyboard as /class/input/input0
Jan 6 00:18:39 dragon kernel: [ 19.427000] TCP: Hash tables
configured (established 262144 bind 65536)
Jan 6 00:18:39 dragon kernel: [ 19.441000] Time: acpi_pm
clocksource has been installed.
Jan 6 00:18:39 dragon kernel: [ 19.455000] TCP reno registered
Jan 6 00:18:39 dragon kernel: [ 19.456000] TCP bic registered
Jan 6 00:18:39 dragon kernel: [ 19.457000] NET: Registered protocol family 1
Jan 6 00:18:39 dragon kernel: [ 19.458000] NET: Registered protocol family 17
Jan 6 00:18:39 dragon kernel: [ 19.459000] Starting balanced_irq
Jan 6 00:18:39 dragon kernel: [ 19.476000] EXT3-fs: mounted
filesystem with ordered data mode.
Jan 6 00:18:39 dragon kernel: [ 19.478000] Freeing unused kernel
memory: 208k freed
Jan 6 00:18:39 dragon kernel: [ 19.479000] kjournald starting.
Commit interval 5 seconds
Jan 6 00:18:39 dragon kernel: [ 19.819000] input: ImExPS/2 Generic
Explorer Mouse as /class/input/input1
Jan 6 00:18:39 dragon kernel: [ 21.108000] Adding 763076k swap on
/dev/sda3. Priority:-1 extents:1 across:763076k
Jan 6 00:18:39 dragon kernel: [ 21.280000] EXT3 FS on sda1, internal journal
Jan 6 00:18:39 dragon kernel: [ 22.130000] Linux agpgart interface
v0.101 (c) Dave Jones
Jan 6 00:18:39 dragon kernel: [ 25.715000] ReiserFS: sda2: found
reiserfs format "3.6" with standard journal
Jan 6 00:18:39 dragon kernel: [ 25.949000] ReiserFS: sda2: using
ordered data mode
Jan 6 00:18:39 dragon kernel: [ 25.957000] ReiserFS: sda2: journal
params: device sda2, size 8192, journal first block 18, max trans len
1024, max batch 900, max commit age 30, max trans age 30
Jan 6 00:18:39 dragon kernel: [ 25.959000] ReiserFS: sda2: checking
transaction log (sda2)
Jan 6 00:18:39 dragon kernel: [ 25.972000] ReiserFS: sda2: Using r5
hash to sort names
Jan 6 00:18:39 dragon kernel: [ 26.024000] ReiserFS: sda4: found
reiserfs format "3.6" with standard journal
Jan 6 00:18:39 dragon kernel: [ 26.664000] ReiserFS: sda4: using
ordered data mode
Jan 6 00:18:39 dragon kernel: [ 26.679000] ReiserFS: sda4: journal
params: device sda4, size 8192, journal first block 18, max trans len
1024, max batch 900, max commit age 30, max trans age 30
Jan 6 00:18:39 dragon kernel: [ 26.680000] ReiserFS: sda4: checking
transaction log (sda4)
Jan 6 00:18:39 dragon kernel: [ 26.728000] ReiserFS: sda4: Using r5
hash to sort names
Jan 6 00:18:39 dragon logger: /etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1
Jan 6 00:18:39 dragon logger: /etc/rc.d/rc.inet1: /sbin/route add
-net 127.0.0.0 netmask 255.0.0.0 lo
Jan 6 00:18:39 dragon logger: /etc/rc.d/rc.inet1: /sbin/dhcpcd -d -t 60 eth0
Jan 6 00:18:39 dragon kernel: [ 28.541000] eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1
Jan 6 00:18:40 dragon dhcpcd[1065]: infinite IP address lease time. Exiting
Jan 6 00:18:40 dragon logger: /etc/rc.d/rc.hotplug start (entering script)
Jan 6 00:18:40 dragon kernel: [ 28.974000] ACPI: PCI Interrupt
0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 20
Jan 6 00:18:41 dragon kernel: [ 29.689000] usbcore: registered new
driver usbfs
Jan 6 00:18:41 dragon kernel: [ 29.699000] usbcore: registered new driver hub
Jan 6 00:18:41 dragon kernel: [ 29.717000] USB Universal Host
Controller Interface driver v3.0
Jan 6 00:18:41 dragon logger: /etc/rc.d/rc.hotplug start (exiting script)
Jan 6 00:18:41 dragon sshd[2184]: Server listening on 0.0.0.0 port 22.
Jan 6 00:19:07 dragon kernel: [ 55.776000] psmouse.c: resync
failed, issuing reconnect request
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Jesper Juhl <[email protected]> wrote:
>
> On 1/5/06, Andrew Morton <[email protected]> wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15/2.6.15-mm1/
> >
> >
> <!-- snip -->
>
> Hi Andrew,
>
> 2.6.15-mm1 seems to be working less than perfect on my box.
>
ahem...
> Everything seems to be fine in console mode, but once I start X and
> then login and KDE starts, the box locks up solid while loading KDE
> (dies every time at the exact same spot, the "Initializing
> peripherals" stage on the KDE splash screen).
Various people have reported DRM/AGP oopses when starting X. It's probably
that.
Could you try reverting git-agpgart.patch?
> Unfortunately not much makes it to the logs. The only things I can
> find is this :
>
> Jan 6 00:18:39 dragon kernel: [ 19.479000] Write protecting the
> kernel read-only data: 333k
> Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Signaled
> System Error on 0000:00:18.2
> Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Master Data
> Parity Error on 0000:00:18.2
> Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Detected
> Parity Error on 0000:00:18.2
> <<<here I power off the system since it's locked solid>>>
>
Alan, it's fishy how many people are getting EDAC failures.
> mainline 2.6.15 is rock solid.
>
>
> Here are some details about my system (I included everything I could
> think might be relevant, but please do ask if there's anything else
> you need) and at the end my .config for 2.6.15-mm1 (based on the one I
> use for 2.6.15 with 'make oldconfig') ;
>
> note: all the following info was gathered while running my working
> 2.6.15 kernel, if it matters I can boot 2.6.15-mm1 in console mode and
> gather the same or more - just let me know.
>
>
> $ cat /etc/slackware-version
> Slackware 10.2.0
>
>
> $ scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux dragon 2.6.15 #1 SMP PREEMPT Tue Jan 3 20:44:46 CET 2006 i686
> unknown unknown GNU/Linux
>
> Gnu C 3.4.5
> Gnu make 3.80
> binutils 2.15.92.0.2
> util-linux 2.12p
> mount 2.12p
> module-init-tools 3.1
> e2fsprogs 1.38
> reiserfsprogs 3.6.19
> quota-tools 3.12.
> PPP 2.4.4b1
> nfs-utils 1.0.7
> Linux C Library 2.3.6
> Dynamic linker (ldd) 2.3.6
> Linux C++ Library 6.0.3
> Procps 3.2.5
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 5.2.1
> udev 064
> Modules Loaded snd_seq_oss snd_seq_midi_event snd_seq
> snd_pcm_oss snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi
> snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_ac97_bus
> snd_page_alloc snd_util_mem snd_hwdep snd agpgart
>
>
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 35
> model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
> stepping : 2
> cpu MHz : 2200.324
> cache size : 1024 KB
> physical id : 0
> siblings : 1
> core id : 0
> cpu cores : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
> fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
> bogomips : 4403.36
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 35
> model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
> stepping : 2
> cpu MHz : 2200.324
> cache size : 1024 KB
> physical id : 127
> siblings : 1
> core id : 1
> cpu cores : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
> fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy
> bogomips : 4399.53
>
>
> $ cat /proc/meminfo
> MemTotal: 2076028 kB
> MemFree: 1756308 kB
> Buffers: 20044 kB
> Cached: 185928 kB
> SwapCached: 0 kB
> Active: 154844 kB
> Inactive: 138172 kB
> HighTotal: 1179328 kB
> HighFree: 900900 kB
> LowTotal: 896700 kB
> LowFree: 855408 kB
> SwapTotal: 763076 kB
> SwapFree: 763076 kB
> Dirty: 8 kB
> Writeback: 0 kB
> Mapped: 129336 kB
> Slab: 13472 kB
> CommitLimit: 1801088 kB
> Committed_AS: 386364 kB
> PageTables: 1228 kB
> VmallocTotal: 114680 kB
> VmallocUsed: 6496 kB
> VmallocChunk: 108032 kB
>
>
> # lspci -v
> 00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express
> and HyperTransport]
> Flags: bus master, fast devsel, latency 0
> Capabilities: [40] #08 [0060]
> Capabilities: [5c] #08 [a800]
> Capabilities: [68] #08 [9000]
> Capabilities: [74] #08 [8000]
> Capabilities: [7c] Message Signalled Interrupts: 64bit+
> Queue=0/1 Enable-
>
> 00:01.0 PCI bridge: ALi Corporation: Unknown device 524b (prog-if 00
> [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: ff200000-ff2fffff
> Capabilities: [40] Power Management version 2
> Capabilities: [48] Message Signalled Interrupts: 64bit+
> Queue=0/1 Enable-
> Capabilities: [58] #10 [0141]
> Capabilities: [7c] #08 [a800]
> Capabilities: [88] #08 [8825]
>
> 00:02.0 PCI bridge: ALi Corporation: Unknown device 524c (prog-if 00
> [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> Memory behind bridge: ff300000-ff3fffff
> Capabilities: [40] Power Management version 2
> Capabilities: [48] Message Signalled Interrupts: 64bit+
> Queue=0/1 Enable-
> Capabilities: [58] #10 [0141]
> Capabilities: [7c] #08 [a800]
> Capabilities: [88] #08 [8825]
>
> 00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
> Flags: bus master, fast devsel, latency 0
> Memory at dc000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [40] #08 [0024]
> Capabilities: [60] #08 [8038]
> Capabilities: [80] AGP version 3.0
>
> 00:05.0 PCI bridge: ALi Corporation AGP8X Controller (prog-if 00
> [Normal decode])
> Flags: bus master, 66Mhz, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
> Memory behind bridge: ff400000-ff4fffff
> Prefetchable memory behind bridge: c7f00000-d7efffff
>
> 00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if
> 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: ff500000-ff5fffff
> Prefetchable memory behind bridge: 88000000-880fffff
>
> 00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
> Subsystem: ASRock Incorporation: Unknown device 1563
> Flags: bus master, medium devsel, latency 0
>
> 00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
> Subsystem: ASRock Incorporation: Unknown device 7101
> Flags: medium devsel
>
> 00:11.0 Ethernet controller: ALi Corporation M5263 Ethernet Controller (rev 40)
> Subsystem: ASRock Incorporation: Unknown device 5263
> Flags: bus master, medium devsel, latency 32, IRQ 10
> I/O ports at e800 [size=256]
> Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
>
> 00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if 8a
> [Master SecP PriP])
> Subsystem: ASRock Incorporation: Unknown device 5229
> Flags: bus master, 66Mhz, medium devsel, latency 32
> I/O ports at <ignored>
> I/O ports at <ignored>
> I/O ports at <ignored>
> I/O ports at <ignored>
> I/O ports at ff00 [size=16]
>
> 00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
> (prog-if 10 [OHCI])
> Subsystem: ASRock Incorporation: Unknown device 5237
> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
> Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
> (prog-if 10 [OHCI])
> Subsystem: ASRock Incorporation: Unknown device 5237
> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 3
> Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
> (prog-if 10 [OHCI])
> Subsystem: ASRock Incorporation: Unknown device 5237
> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
> Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
> (prog-if 20 [EHCI])
> Subsystem: ASRock Incorporation: Unknown device 5239
> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
> Memory at ff6ff800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] #0a [2090]
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration
> Flags: fast devsel
> Capabilities: [80] #08 [2101]
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map
> Flags: fast devsel
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller
> Flags: fast devsel
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control
> Flags: fast devsel
>
> 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA Parhelia
> AGP (rev 03) (prog-if 00 [VGA])
> Subsystem: Matrox Graphics, Inc. Parhelia 128Mb
> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
> Memory at c8000000 (32-bit, prefetchable) [size=128M]
> Memory at ff4fe000 (32-bit, non-prefetchable) [size=8K]
> Expansion ROM at ff4c0000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Capabilities: [f0] AGP version 2.0
>
> 04:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
> Subsystem: Creative Labs SBLive! 5.1 eMicro 28028
> Flags: bus master, medium devsel, latency 32, IRQ 20
> I/O ports at d880 [size=32]
> Capabilities: [dc] Power Management version 1
>
> 04:05.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
> Subsystem: Creative Labs Gameport Joystick
> Flags: bus master, medium devsel, latency 32
> I/O ports at dc00 [size=8]
> Capabilities: [dc] Power Management version 1
>
> 04:06.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
> Subsystem: Adaptec 29160N Ultra160 SCSI Controller
> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 19
> BIST result: 00
> I/O ports at d400 [disabled] [size=256]
> Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at 88000000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
>
> 04:07.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 42)
> Subsystem: D-Link System Inc DFE-530TX rev B
> Flags: bus master, medium devsel, latency 32, IRQ 18
> I/O ports at d000 [size=256]
> Memory at ff5fec00 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at 88020000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 2
>
>
> # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 05 Lun: 00
> Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
> Vendor: IBM Model: DDYS-T36950N Rev: S96H
> Type: Direct-Access ANSI SCSI revision: 03
>
>
> # cat /proc/cmdline
> BOOT_IMAGE=2.6.15 ro root=801 pci=usepirqmask
>
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.15-mm1
> # Thu Jan 5 23:53:51 2006
> #
> CONFIG_X86_32=y
> CONFIG_GENERIC_TIME=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_DMI=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_CPUSETS is not set
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_UID16=y
> CONFIG_VM86=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_DOUBLEFAULT=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> CONFIG_SLAB=y
> CONFIG_SERIAL_PCI=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> # CONFIG_SLOB is not set
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_MODVERSIONS=y
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
>
> #
> # Block layer
> #
> # CONFIG_LBD is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> # CONFIG_IOSCHED_DEADLINE is not set
> # CONFIG_IOSCHED_CFQ is not set
> CONFIG_DEFAULT_AS=y
> # CONFIG_DEFAULT_DEADLINE is not set
> # CONFIG_DEFAULT_CFQ is not set
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="anticipatory"
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> CONFIG_MK8=y
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_SMP=y
> CONFIG_NR_CPUS=2
> # CONFIG_SCHED_SMT is not set
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_BKL=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> # CONFIG_X86_MCE_P4THERMAL is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_X86_REBOOTFIXUPS is not set
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> # CONFIG_NOHIGHMEM is not set
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
> CONFIG_HIGHMEM=y
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPARSEMEM_STATIC=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_HIGHPTE=y
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_EFI is not set
> CONFIG_IRQBALANCE=y
> CONFIG_REGPARM=y
> CONFIG_SECCOMP=y
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> # CONFIG_KEXEC is not set
> # CONFIG_CRASH_DUMP is not set
> CONFIG_PHYSICAL_START=0x100000
>
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
> # CONFIG_PM_DEBUG is not set
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_HOTKEY=m
> CONFIG_ACPI_FAN=m
> CONFIG_ACPI_PROCESSOR=m
> CONFIG_ACPI_THERMAL=m
> CONFIG_ACPI_ASUS=m
> CONFIG_ACPI_IBM=m
> CONFIG_ACPI_TOSHIBA=m
> # CONFIG_ACPI_SONY is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_ACPI_CONTAINER is not set
>
> #
> # APM (Advanced Power Management) BIOS Support
> #
> CONFIG_APM=y
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> CONFIG_APM_DO_ENABLE=y
> CONFIG_APM_CPU_IDLE=y
> # CONFIG_APM_DISPLAY_BLANK is not set
> CONFIG_APM_RTC_IS_GMT=y
> # CONFIG_APM_ALLOW_INTS is not set
> CONFIG_APM_REAL_MODE_POWER_OFF=y
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> # CONFIG_PCIEPORTBUS is not set
> # CONFIG_PCI_MSI is not set
> # CONFIG_PCI_LEGACY_PROC is not set
> # CONFIG_PCI_DEBUG is not set
> CONFIG_ISA_DMA_API=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> # CONFIG_HOTPLUG_CPU is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
>
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> # CONFIG_BINFMT_MISC is not set
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_TUNNEL is not set
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
> # CONFIG_IPV6 is not set
> # CONFIG_NETFILTER is not set
>
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_DCCP is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_IEEE80211 is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_DEBUG_DRIVER is not set
>
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> # CONFIG_CONNECTOR is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> # CONFIG_PNP is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=m
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> # CONFIG_BLK_DEV_RAM is not set
> CONFIG_BLK_DEV_RAM_COUNT=16
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
>
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> CONFIG_SCSI_FC_ATTRS=y
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SAS_CLASS is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=200
> CONFIG_AIC7XXX_RESET_DELAY_MS=15001
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> # CONFIG_SCSI_SATA is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=y
> # CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_SPI is not set
> # CONFIG_FUSION_FC is not set
> # CONFIG_FUSION_SAS is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
>
> #
> # PHY device support
> #
> # CONFIG_PHYLIB is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> CONFIG_VIA_RHINE=y
> CONFIG_VIA_RHINE_MMIO=y
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_KGDBOE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NETPOLL_RX is not set
> # CONFIG_NETPOLL_TRAP is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_PCSPKR is not set
> # CONFIG_INPUT_WISTRON_BTNS is not set
> CONFIG_INPUT_UINPUT=m
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_CONSOLE is not set
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=2
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> CONFIG_HW_RANDOM=y
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=m
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_EFFICEON is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_CS5535_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HPET is not set
> CONFIG_HANGCHECK_TIMER=m
>
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # SPI support
> #
> CONFIG_SPI_ARCH_HAS_MASTER=y
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> # CONFIG_HWMON is not set
> # CONFIG_HWMON_VID is not set
>
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
>
> #
> # Multimedia Capabilities Port drivers
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> CONFIG_FB=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_MODE_HELPERS=y
> # CONFIG_FB_TILEBLITTING is not set
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> CONFIG_FB_VESA=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I810 is not set
> # CONFIG_FB_INTEL is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON_OLD is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_CYBLA is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
>
> #
> # Logo configuration
> #
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_HWDEP=m
> CONFIG_SND_RAWMIDI=m
> CONFIG_SND_SEQUENCER=m
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=m
> CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> # CONFIG_SND_DYNAMIC_MINORS is not set
> CONFIG_SND_SUPPORT_OLD_API=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
>
> #
> # Generic devices
> #
> CONFIG_SND_AC97_CODEC=m
> CONFIG_SND_AC97_BUS=m
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
>
> #
> # PCI devices
> #
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS5535AUDIO is not set
> CONFIG_SND_EMU10K1=m
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_HDA_INTEL is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
>
> #
> # USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
> # CONFIG_SND_USB_USX2Y is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_BANDWIDTH=y
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_EHCI_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=m
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_IP is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
>
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Input Devices
> #
> # CONFIG_USB_HID is not set
>
> #
> # USB HID Boot Protocol drivers
> #
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_ACECAD is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_MTOUCH is not set
> # CONFIG_USB_ITMTOUCH is not set
> # CONFIG_USB_EGALAX is not set
> # CONFIG_USB_YEALINK is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> # CONFIG_USB_ATI_REMOTE2 is not set
> # CONFIG_USB_KEYSPAN_REMOTE is not set
> # CONFIG_USB_APPLETOUCH is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
>
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> CONFIG_USB_MON=y
>
> #
> # USB port drivers
> #
>
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_GOTEMP is not set
> # CONFIG_USB_PHIDGETKIT is not set
> # CONFIG_USB_PHIDGETSERVO is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TEST is not set
>
> #
> # USB DSL modem support
> #
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
>
> #
> # SN Devices
> #
>
> #
> # EDAC - error detection and reporting (RAS)
> #
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=y
> # CONFIG_EDAC_AMD76X is not set
> # CONFIG_EDAC_E7XXX is not set
> # CONFIG_EDAC_E752X is not set
> # CONFIG_EDAC_I82875P is not set
> # CONFIG_EDAC_I82860 is not set
> # CONFIG_EDAC_R82600 is not set
> CONFIG_EDAC_POLL=y
>
> #
> # Distributed Lock Manager
> #
> # CONFIG_DLM is not set
>
> #
> # File systems
> #
> # CONFIG_EXT2_FS is not set
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_FS_XATTR is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> # CONFIG_REISER4_FS is not set
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> # CONFIG_REISERFS_FS_XATTR is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_FS_POSIX_ACL is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> CONFIG_UDF_FS=m
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=865
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_RELAYFS_FS is not set
> # CONFIG_CONFIGFS_FS is not set
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ASFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_NFS_FS is not set
> # CONFIG_NFSD is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-15"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> CONFIG_NLS_CODEPAGE_865=y
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> CONFIG_NLS_CODEPAGE_1250=m
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
>
> #
> # Instrumentation Support
> #
> # CONFIG_PROFILING is not set
> # CONFIG_KPROBES is not set
>
> #
> # Kernel hacking
> #
> CONFIG_PRINTK_TIME=y
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_DEBUG_SHIRQ=y
> CONFIG_DEBUG_KERNEL=y
> CONFIG_LOG_BUF_SHIFT=16
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> CONFIG_DEBUG_PREEMPT=y
> # CONFIG_DEBUG_SPINLOCK is not set
> CONFIG_DEBUG_SPINLOCK_SLEEP=y
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_HIGHMEM is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_PAGE_OWNER is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_DEBUG_VM is not set
> CONFIG_FRAME_POINTER=y
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> CONFIG_DEBUG_STACK_USAGE=y
> # CONFIG_DEBUG_PAGEALLOC is not set
> CONFIG_DEBUG_RODATA=y
> CONFIG_4KSTACKS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_KGDB is not set
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Hardware crypto devices
> #
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> CONFIG_CRC32=y
> # CONFIG_LIBCRC32C is not set
> CONFIG_ZLIB_INFLATE=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_X86_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_X86_TRAMPOLINE=y
> CONFIG_KTIME_SCALAR=y
>
>
> --
> Jesper Juhl <[email protected]>
> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
> Plain text mails only, please http://www.expita.com/nomime.html
On 1/6/06, Andrew Morton <[email protected]> wrote:
> Jesper Juhl <[email protected]> wrote:
> >
> > On 1/5/06, Andrew Morton <[email protected]> wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15/2.6.15-mm1/
> > >
> > >
> > <!-- snip -->
> >
> > Hi Andrew,
> >
> > 2.6.15-mm1 seems to be working less than perfect on my box.
> >
>
> ahem...
>
Ohh well, that's why we have -mm :)
> > Everything seems to be fine in console mode, but once I start X and
> > then login and KDE starts, the box locks up solid while loading KDE
> > (dies every time at the exact same spot, the "Initializing
> > peripherals" stage on the KDE splash screen).
>
> Various people have reported DRM/AGP oopses when starting X. It's probably
> that.
>
> Could you try reverting git-agpgart.patch?
>
Just did. Reverted that one patch, then rebuild/reinstalled the kernel
(with the same .config) and booted it - no change. It still locks up
in the exact same spot.
X starts & runs fine (sort of) since I can play around at the kdm
login screen all I want, it's only once I actually login and KDE
proper starts that it locks up.
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Jesper Juhl <[email protected]> wrote:
>
> > > Everything seems to be fine in console mode, but once I start X and
> > > then login and KDE starts, the box locks up solid while loading KDE
> > > (dies every time at the exact same spot, the "Initializing
> > > peripherals" stage on the KDE splash screen).
> >
> > Various people have reported DRM/AGP oopses when starting X. It's probably
> > that.
> >
> > Could you try reverting git-agpgart.patch?
> >
> Just did.
Thanks.
> Reverted that one patch, then rebuild/reinstalled the kernel
> (with the same .config) and booted it - no change. It still locks up
> in the exact same spot.
> X starts & runs fine (sort of) since I can play around at the kdm
> login screen all I want, it's only once I actually login and KDE
> proper starts that it locks up.
Oh bugger. No serial console/netconsole or such?
Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
get an oops?
On 1/6/06, Andrew Morton <[email protected]> wrote:
> Jesper Juhl <[email protected]> wrote:
> >
> > > > Everything seems to be fine in console mode, but once I start X and
> > > > then login and KDE starts, the box locks up solid while loading KDE
> > > > (dies every time at the exact same spot, the "Initializing
> > > > peripherals" stage on the KDE splash screen).
> > >
> > > Various people have reported DRM/AGP oopses when starting X. It's probably
> > > that.
> > >
> > > Could you try reverting git-agpgart.patch?
> > >
> > Just did.
>
> Thanks.
>
> > Reverted that one patch, then rebuild/reinstalled the kernel
> > (with the same .config) and booted it - no change. It still locks up
> > in the exact same spot.
> > X starts & runs fine (sort of) since I can play around at the kdm
> > login screen all I want, it's only once I actually login and KDE
> > proper starts that it locks up.
>
> Oh bugger. No serial console/netconsole or such?
>
Unfortunately no, I currently only have this one machine available.
> Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> get an oops?
>
I'll try, I'll also try and see if I can get something into logs by
playing with sysrq, but that'll all have to wait until tomorrow
evening, right now I need some sleep - I'll report back.
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On Gwe, 2006-01-06 at 00:52 +0100, Jesper Juhl wrote:
> Unfortunately not much makes it to the logs. The only things I can
> find is this :
>
> Jan 6 00:18:39 dragon kernel: [ 19.479000] Write protecting the
> kernel read-only data: 333k
> Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Signaled
> System Error on 0000:00:18.2
> Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Master Data
> Parity Error on 0000:00:18.2
> Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Detected
> Parity Error on 0000:00:18.2
> <<<here I power off the system since it's locked solid>>>
If those occur just at boot then they may be noise from the bios setup.
Can you build without EDAC and check if that stops the crash. It
shouldn't stop it crashing but if it does then its important to know
On 1/6/06, Andrew Morton <[email protected]> wrote:
> Jesper Juhl <[email protected]> wrote:
>
> > Reverted that one patch, then rebuild/reinstalled the kernel
> > (with the same .config) and booted it - no change. It still locks up
> > in the exact same spot.
> > X starts & runs fine (sort of) since I can play around at the kdm
> > login screen all I want, it's only once I actually login and KDE
> > proper starts that it locks up.
>
> Oh bugger. No serial console/netconsole or such?
>
> Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> get an oops?
>
I switched to tty1 right after logging in, and after a few seconds
(corresponding pretty well with the time it takes to hit the same spot
where it crashed all previous times) I got a lot of nice crash info
scrolling by.
Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
more) screens scrolled by, and since the box locks up solid I couldn't
scroll up to get at the initial parts :( So all I have for you is the
final block - hand copied from the screen using pen and paper, so
please excuse any typos I may have made :
Bad page state in process 'kded'
page:c16a39e0 flags:0x00000000 mapping:00000000 mapcount:1 count:1
Trying to fix it up, but a reboot is needed
Backtrace:
[<c0103e77>] dump_stack+0x17/0x20
[<c0146f89>] bad_page+0x69/0x110
[<c01473d2>] __free_pages_ok+0x82/0xd0
[<c014818d>] __free_pages+0x3d/0x50
[<c02a6663>] sg_page_free+0x23/0x30
[<c02a5913>] sg_remove_scat+0x63/0xe0
[<c02a62fd>] __sg_remove_sfp+0x4d/0xc0
[<c02a6417>] sg_remove_sf+0xa7/0x120
[<c02a26d6>] sg_release+0x46/0xc0
[<c0163637>] __fput+0x167/0x1b0
[<c01634bb>] fput+0x3b/0x50
[<c0161bcc>] filp_close+0x3c/0x80
[<c0161c79>] sys_close+0x69/0x90
[<c0103009>] syscall_call+0x7/0xb
Hexdump:
000: 00 00 00 00 ff ff ff ff ff ff ff ff 00 00 00 00
010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
020: 00 00 00 00 ff ff ff ff ff ff ff ff 00 00 00 00
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Hope that helps a bit even though it's the last and thus least
interresting block of info.
It never makes it to the logs, and as mentioned previously I don't
have another machine to capture on via netconsole or serial, so if you
have any good ideas as to how to capture it all, then I'm all ears.
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> On 1/6/06, Andrew Morton <[email protected]> wrote:
> > Jesper Juhl <[email protected]> wrote:
> >
> > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > (with the same .config) and booted it - no change. It still locks up
> > > in the exact same spot.
> > > X starts & runs fine (sort of) since I can play around at the kdm
> > > login screen all I want, it's only once I actually login and KDE
> > > proper starts that it locks up.
> >
> > Oh bugger. No serial console/netconsole or such?
> >
> > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > get an oops?
> >
> I switched to tty1 right after logging in, and after a few seconds
> (corresponding pretty well with the time it takes to hit the same spot
> where it crashed all previous times) I got a lot of nice crash info
> scrolling by.
> Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> more) screens scrolled by, and since the box locks up solid I couldn't
> scroll up to get at the initial parts :( So all I have for you is the
> final block - hand copied from the screen using pen and paper
> ...
> It never makes it to the logs, and as mentioned previously I don't
> have another machine to capture on via netconsole or serial, so if you
> have any good ideas as to how to capture it all, then I'm all ears.
If only someone did a patch to pause the text output after the first oops..
Oh wait! Someone did!
Dave
Dave Jones <[email protected]> wrote:
>
> On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> > On 1/6/06, Andrew Morton <[email protected]> wrote:
> > > Jesper Juhl <[email protected]> wrote:
> > >
> > > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > > (with the same .config) and booted it - no change. It still locks up
> > > > in the exact same spot.
> > > > X starts & runs fine (sort of) since I can play around at the kdm
> > > > login screen all I want, it's only once I actually login and KDE
> > > > proper starts that it locks up.
> > >
> > > Oh bugger. No serial console/netconsole or such?
> > >
> > > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > > get an oops?
> > >
> > I switched to tty1 right after logging in, and after a few seconds
> > (corresponding pretty well with the time it takes to hit the same spot
> > where it crashed all previous times) I got a lot of nice crash info
> > scrolling by.
> > Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> > more) screens scrolled by, and since the box locks up solid I couldn't
> > scroll up to get at the initial parts :( So all I have for you is the
> > final block - hand copied from the screen using pen and paper
> > ...
> > It never makes it to the logs, and as mentioned previously I don't
> > have another machine to capture on via netconsole or serial, so if you
> > have any good ideas as to how to capture it all, then I'm all ears.
>
> If only someone did a patch to pause the text output after the first oops..
>
> Oh wait! Someone did!
>
umm, it'd be more helpful if you'd actually sent the patch so Jesper could
apply it so we can find this bug.
I think I did one of those too. It required a new kernel boot option
`halt-after-oops' or some such. Sounds like a good idea?
On Fri, Jan 06, 2006 at 04:40:12PM -0800, Andrew Morton wrote:
> Dave Jones <[email protected]> wrote:
> >
> > On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> > > On 1/6/06, Andrew Morton <[email protected]> wrote:
> > > > Jesper Juhl <[email protected]> wrote:
> > > >
> > > > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > > > (with the same .config) and booted it - no change. It still locks up
> > > > > in the exact same spot.
> > > > > X starts & runs fine (sort of) since I can play around at the kdm
> > > > > login screen all I want, it's only once I actually login and KDE
> > > > > proper starts that it locks up.
> > > >
> > > > Oh bugger. No serial console/netconsole or such?
> > > >
> > > > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > > > get an oops?
> > > >
> > > I switched to tty1 right after logging in, and after a few seconds
> > > (corresponding pretty well with the time it takes to hit the same spot
> > > where it crashed all previous times) I got a lot of nice crash info
> > > scrolling by.
> > > Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> > > more) screens scrolled by, and since the box locks up solid I couldn't
> > > scroll up to get at the initial parts :( So all I have for you is the
> > > final block - hand copied from the screen using pen and paper
> > > ...
> > > It never makes it to the logs, and as mentioned previously I don't
> > > have another machine to capture on via netconsole or serial, so if you
> > > have any good ideas as to how to capture it all, then I'm all ears.
> >
> > If only someone did a patch to pause the text output after the first oops..
> >
> > Oh wait! Someone did!
> >
>
> umm, it'd be more helpful if you'd actually sent the patch so Jesper could
> apply it so we can find this bug.
>
> I think I did one of those too. It required a new kernel boot option
> `halt-after-oops' or some such. Sounds like a good idea?
I thought Jesper had made a comment in that thread, so was aware of it.
Looking at the archive, I see was mistaken.
Jesper: http://lkml.org/lkml/2006/1/4/534
(unmunged diff is at http://lkml.org/lkml/diff/2006/1/4/534/1)
Dave
On 1/6/06, Alan Cox <[email protected]> wrote:
> On Gwe, 2006-01-06 at 00:52 +0100, Jesper Juhl wrote:
> > Unfortunately not much makes it to the logs. The only things I can
> > find is this :
> >
> > Jan 6 00:18:39 dragon kernel: [ 19.479000] Write protecting the
> > kernel read-only data: 333k
> > Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Signaled
> > System Error on 0000:00:18.2
> > Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Master Data
> > Parity Error on 0000:00:18.2
> > Jan 6 00:18:57 dragon kernel: [ 46.416000] EDAC PCI- Detected
> > Parity Error on 0000:00:18.2
> > <<<here I power off the system since it's locked solid>>>
>
> If those occur just at boot then they may be noise from the bios setup.
> Can you build without EDAC and check if that stops the crash. It
> shouldn't stop it crashing but if it does then its important to know
>
I just build a new 2.6.15-mm1 with the same config as before excet for
the fact that I took out the EDAC support.
It doesn't stop the crash. It still crashes at the same spot, but in a
slightly different manner.
Switching to tty1 just before the crash allowed me to write down the
last bit of several pages of output (copied by hand, so I left out
addresses an offsets, it's quite reproducable though, so if you want
that info I'll crash again and write it down for you) - here's what I
managed to get :
Stack: <0>00000001 c16cea00 c0371e78 00000000 00000000 c0371dcc
0000001f c21fbdcc
<0>c01475c2 c0371e40 00000000 c0371d80 c0371d80 c0371d80
c0371dc0 c21fbe00
<0>c0147a9a c0371dcc c0179602 f7afb1a0 f7ae51a0 00000000
c21fbf34 00000256
Call trace:
show_stack
show_registers
die
do_page_fault
error_code
rmqueue_bulk
buffered_rmqueue
get_page_from_freelist
__alloc_pages
kmem_getppages
cache_grow
cache_alloc_refill
kmem_cache_alloc
dup_task_struct
copy_process
do_fork
sys_clone
syscall_call
Code_ 00 89 55 ec 8b 90 c8 00 00 00 3b 55 ec 75 13 41 83 c0 0c 83 f9
0a 76 e3 83 c4 10 31 c0 5b 5e 5f c9 c3 8d 5a e8 89 5d e8 8b 72 04 <39>
16 75 79 8b 1a 39 53 04 75 7f 89 73 04 89 1e c7 42 04 00 02
<6>note: syslogd[1034] exited with preempt_count 2
Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
in_atomic():1, irqs_disabled():1
dump_stack
__might_sleep
exit_mm
do_exit
die
do_page_fault
error_code
rmqueue_bulk
buffered_rmqueue
get_page_from_freelist
__alloc_pages
kmem_getpages
cache_grow
cache_alloc_refill
kmem_cache_alloc
dup_task_struct
copy_process
do_fork
sys_clone
syscall_call
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On 1/7/06, Dave Jones <[email protected]> wrote:
> On Fri, Jan 06, 2006 at 04:40:12PM -0800, Andrew Morton wrote:
> > Dave Jones <[email protected]> wrote:
> > >
> > > On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> > > > On 1/6/06, Andrew Morton <[email protected]> wrote:
> > > > > Jesper Juhl <[email protected]> wrote:
> > > > >
> > > > > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > > > > (with the same .config) and booted it - no change. It still locks up
> > > > > > in the exact same spot.
> > > > > > X starts & runs fine (sort of) since I can play around at the kdm
> > > > > > login screen all I want, it's only once I actually login and KDE
> > > > > > proper starts that it locks up.
> > > > >
> > > > > Oh bugger. No serial console/netconsole or such?
> > > > >
> > > > > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > > > > get an oops?
> > > > >
> > > > I switched to tty1 right after logging in, and after a few seconds
> > > > (corresponding pretty well with the time it takes to hit the same spot
> > > > where it crashed all previous times) I got a lot of nice crash info
> > > > scrolling by.
> > > > Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> > > > more) screens scrolled by, and since the box locks up solid I couldn't
> > > > scroll up to get at the initial parts :( So all I have for you is the
> > > > final block - hand copied from the screen using pen and paper
> > > > ...
> > > > It never makes it to the logs, and as mentioned previously I don't
> > > > have another machine to capture on via netconsole or serial, so if you
> > > > have any good ideas as to how to capture it all, then I'm all ears.
> > >
> > > If only someone did a patch to pause the text output after the first oops..
> > >
> > > Oh wait! Someone did!
> > >
> >
> > umm, it'd be more helpful if you'd actually sent the patch so Jesper could
> > apply it so we can find this bug.
> >
> > I think I did one of those too. It required a new kernel boot option
> > `halt-after-oops' or some such. Sounds like a good idea?
>
> I thought Jesper had made a comment in that thread, so was aware of it.
> Looking at the archive, I see was mistaken.
>
Nope, you are were not mistaken, I did make a comment in that thread
(http://lkml.org/lkml/2006/1/5/204), but that thread had completely
slipped my mind, thank you for the reminder.
> Jesper: http://lkml.org/lkml/2006/1/4/534
> (unmunged diff is at http://lkml.org/lkml/diff/2006/1/4/534/1)
>
Thanks, I'll apply that (and raise the timeout somewhat, since 2min is
far from enough time for me to write down an entire Oops by hand -
wouldn't it be better if it simply spun in a loop until some magic key
(like enter, esc, break or something) is pressed? Then you have all
the time you might need).
I'll hopefully post a "first Oops" in a little while - stay tuned ;)
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On 1/7/06, Jesper Juhl <[email protected]> wrote:
> On 1/7/06, Dave Jones <[email protected]> wrote:
>
> > Jesper: http://lkml.org/lkml/2006/1/4/534
> > (unmunged diff is at http://lkml.org/lkml/diff/2006/1/4/534/1)
> >
> Thanks, I'll apply that (and raise the timeout somewhat, since 2min is
> far from enough time for me to write down an entire Oops by hand -
> wouldn't it be better if it simply spun in a loop until some magic key
> (like enter, esc, break or something) is pressed? Then you have all
> the time you might need).
>
btw: your patch is missing a small bit. You need to #include
<linux/nmi.h> in arch/i386/kernel/traps.c or you'll get
arch/i386/kernel/traps.c: In function `show_registers':
arch/i386/kernel/traps.c:300: warning: implicit declaration of
function `touch_nmi_watchdog'
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On Fri, 6 Jan 2006 16:40:12 -0800, Andrew Morton <[email protected]> wrote:
>Dave Jones <[email protected]> wrote:
>> If only someone did a patch to pause the text output after the first oops..
>>
>> Oh wait! Someone did!
>>
...
>I think I did one of those too. It required a new kernel boot option
>`halt-after-oops' or some such. Sounds like a good idea?
I'd prefer the halt after oops option, since I often reboot remotely
(ssh) and may not notice boot failed until I get around to opening
new ssh session to target. It's only then that I'll go front the
sulking target's console ;)
Grant.
On 1/7/06, Andrew Morton <[email protected]> wrote:
> Dave Jones <[email protected]> wrote:
> >
> > On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> > > On 1/6/06, Andrew Morton <[email protected]> wrote:
> > > > Jesper Juhl <[email protected]> wrote:
> > > >
> > > > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > > > (with the same .config) and booted it - no change. It still locks up
> > > > > in the exact same spot.
> > > > > X starts & runs fine (sort of) since I can play around at the kdm
> > > > > login screen all I want, it's only once I actually login and KDE
> > > > > proper starts that it locks up.
> > > >
> > > > Oh bugger. No serial console/netconsole or such?
> > > >
> > > > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > > > get an oops?
> > > >
> > > I switched to tty1 right after logging in, and after a few seconds
> > > (corresponding pretty well with the time it takes to hit the same spot
> > > where it crashed all previous times) I got a lot of nice crash info
> > > scrolling by.
> > > Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> > > more) screens scrolled by, and since the box locks up solid I couldn't
> > > scroll up to get at the initial parts :( So all I have for you is the
> > > final block - hand copied from the screen using pen and paper
> > > ...
> > > It never makes it to the logs, and as mentioned previously I don't
> > > have another machine to capture on via netconsole or serial, so if you
> > > have any good ideas as to how to capture it all, then I'm all ears.
> >
> > If only someone did a patch to pause the text output after the first oops..
> >
> > Oh wait! Someone did!
> >
>
> umm, it'd be more helpful if you'd actually sent the patch so Jesper could
> apply it so we can find this bug.
>
Ok, this is with a pristine 2.6.15-mm1 + Dave's oops-pausing-patch
Captured by switching to tty1 just after logging in via kdm.
A *lot* of info still scrolls down when the problem hits before Daves
patch stops it at a BUG dump, it scrolls by too fast for me to see
what it is, but I guess it must be warning/error messages other than
Oops's or BUG()'s ???
Anyway, here's the entire contents of my screen after Daves patch
stops the output - again written down by hand and then typed in from
my handwritten notes, so there may be typos, but I've tried to be
accurate.
050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
------------{ cut here ]------------
kernel BUG at include/linux/list.h:166!
invalid opcode: 0000 [#1]
PREEMPT SMP
Last sysfs file: /class/vc/vcsa2/dev
Modules linked in: snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss
snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi snd_ac97_codec
snd_ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc
snd_util_mem snd_hwdep snd agpgart
CPU: 0
EIP: 0060:[<c01475f5>] Tainted: G B VLI
EFLAGS: 00010017 (2.6.15-mm1)
EIP is at __rmqueue+0xe5/0x100
eax: c0374dd4 ebx: c16ea018 ecx: 00000007 edx: c16ef018
esi: c0374e9c edi: c0374d80 ebp: f7ad0dac esp: f7ad0d90
ds: 007b es: 007b ss: 0068
Process syslogd (pid: 1038, threadinfo=f7ad0000 task=c21dfa90)
Stack: <0>00000001 c16ef000 c0374e9c 00000000 00000000 c0374dcc
0000001f f7ad0dcc
<0>c0147642 c0374e40 00000000 c0374d80 c0374d80 c0374d80
c0374dc0 f7ad0e00
<0>c0147b1a c0374dcc c0179682 c21ce4d0 f7af1090 00000000
f7ad0f34 00000256
Call Trace:
[<c0103e4a>] show_stack+0x8a/0xa0
[<c0104060>] show_registers+0x1e0/0x250
[<c0104272>] die+0x112/0x1a0
[<c010437f>] do_trap+0x7f/0xc0
[<c0104693>] do_invalid_op+0xa3/0xb0
[<c0103b0b>] error_code+0x4f/0x54
[<c0147642>] rmqueue_bulk+0x32/0x60
[<c0147b1a>] buffered_rmqueue+0x12a/0x270
[<c0147db3>] get_page_from_freelist+0xa3/0xd0
[<c0147e2e>] __alloc_pages+0x4e/0x320
[<c015e00b>] kmem_getpages+0x3b/0xa0
[<c015eee2>] cache_grow+0xb2/0x170
[<c015f1a8>] cache_alloc_refill+0x208/0x250
[<c015f426>] kmem_cache_alloc+0x66/0x70
[<c011dc6b>] dup_task_struct+0x3b/0xf0
[<c011ea22>] copy_process+0x62/0xe70
[<c011f922>] do_fork+0x62/0x1a0
[<c0101b5f>] sys_clone+0x2f/0x40
[<c0103009>] syscall_call+0x7/0xb
Code: 13 89 5a 04 ff 43 08 89 70 0c 0f ba 28 0b 3b 75 f0 7f d3 8b 45
e8 83 c4 10 5b 5e 5f c9 c3 0f 0b a5 00 91 bd 32 c0 e9 7a ff ff ff <0f>
0b a6 00 91 bd 32 c0 e9 74 ff ff ff 8d b4 26 00 00 00 00 8d
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Jesper Juhl <[email protected]> wrote:
>
> On 1/7/06, Andrew Morton <[email protected]> wrote:
> > Dave Jones <[email protected]> wrote:
> > >
> > > On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> > > > On 1/6/06, Andrew Morton <[email protected]> wrote:
> > > > > Jesper Juhl <[email protected]> wrote:
> > > > >
> > > > > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > > > > (with the same .config) and booted it - no change. It still locks up
> > > > > > in the exact same spot.
> > > > > > X starts & runs fine (sort of) since I can play around at the kdm
> > > > > > login screen all I want, it's only once I actually login and KDE
> > > > > > proper starts that it locks up.
> > > > >
> > > > > Oh bugger. No serial console/netconsole or such?
> > > > >
> > > > > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > > > > get an oops?
> > > > >
> > > > I switched to tty1 right after logging in, and after a few seconds
> > > > (corresponding pretty well with the time it takes to hit the same spot
> > > > where it crashed all previous times) I got a lot of nice crash info
> > > > scrolling by.
> > > > Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> > > > more) screens scrolled by, and since the box locks up solid I couldn't
> > > > scroll up to get at the initial parts :( So all I have for you is the
> > > > final block - hand copied from the screen using pen and paper
> > > > ...
> > > > It never makes it to the logs, and as mentioned previously I don't
> > > > have another machine to capture on via netconsole or serial, so if you
> > > > have any good ideas as to how to capture it all, then I'm all ears.
> > >
> > > If only someone did a patch to pause the text output after the first oops..
> > >
> > > Oh wait! Someone did!
> > >
> >
> > umm, it'd be more helpful if you'd actually sent the patch so Jesper could
> > apply it so we can find this bug.
> >
>
> Ok, this is with a pristine 2.6.15-mm1 + Dave's oops-pausing-patch
> Captured by switching to tty1 just after logging in via kdm.
> A *lot* of info still scrolls down when the problem hits before Daves
> patch stops it at a BUG dump, it scrolls by too fast for me to see
> what it is, but I guess it must be warning/error messages other than
> Oops's or BUG()'s ???
There might be something wrong with Dave's patch. Or yes, this might be
the first oops.
> Anyway, here's the entire contents of my screen after Daves patch
> stops the output - again written down by hand and then typed in from
> my handwritten notes, so there may be typos, but I've tried to be
> accurate.
>
Gad. That's a lot of work, thanks. Serial console is easier...
Is your screen set to 50 rows? That helps. As does a digital camera.
>
> 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ------------{ cut here ]------------
> kernel BUG at include/linux/list.h:166!
> invalid opcode: 0000 [#1]
> PREEMPT SMP
> Last sysfs file: /class/vc/vcsa2/dev
> Modules linked in: snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss
> snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi snd_ac97_codec
> snd_ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc
> snd_util_mem snd_hwdep snd agpgart
> CPU: 0
> EIP: 0060:[<c01475f5>] Tainted: G B VLI
> EFLAGS: 00010017 (2.6.15-mm1)
> EIP is at __rmqueue+0xe5/0x100
> eax: c0374dd4 ebx: c16ea018 ecx: 00000007 edx: c16ef018
> esi: c0374e9c edi: c0374d80 ebp: f7ad0dac esp: f7ad0d90
> ds: 007b es: 007b ss: 0068
> Process syslogd (pid: 1038, threadinfo=f7ad0000 task=c21dfa90)
> Stack: <0>00000001 c16ef000 c0374e9c 00000000 00000000 c0374dcc
> 0000001f f7ad0dcc
> <0>c0147642 c0374e40 00000000 c0374d80 c0374d80 c0374d80
> c0374dc0 f7ad0e00
> <0>c0147b1a c0374dcc c0179682 c21ce4d0 f7af1090 00000000
> f7ad0f34 00000256
> Call Trace:
> [<c0103e4a>] show_stack+0x8a/0xa0
> [<c0104060>] show_registers+0x1e0/0x250
> [<c0104272>] die+0x112/0x1a0
> [<c010437f>] do_trap+0x7f/0xc0
> [<c0104693>] do_invalid_op+0xa3/0xb0
> [<c0103b0b>] error_code+0x4f/0x54
> [<c0147642>] rmqueue_bulk+0x32/0x60
> [<c0147b1a>] buffered_rmqueue+0x12a/0x270
> [<c0147db3>] get_page_from_freelist+0xa3/0xd0
> [<c0147e2e>] __alloc_pages+0x4e/0x320
> [<c015e00b>] kmem_getpages+0x3b/0xa0
> [<c015eee2>] cache_grow+0xb2/0x170
> [<c015f1a8>] cache_alloc_refill+0x208/0x250
> [<c015f426>] kmem_cache_alloc+0x66/0x70
> [<c011dc6b>] dup_task_struct+0x3b/0xf0
> [<c011ea22>] copy_process+0x62/0xe70
> [<c011f922>] do_fork+0x62/0x1a0
> [<c0101b5f>] sys_clone+0x2f/0x40
> [<c0103009>] syscall_call+0x7/0xb
> Code: 13 89 5a 04 ff 43 08 89 70 0c 0f ba 28 0b 3b 75 f0 7f d3 8b 45
> e8 83 c4 10 5b 5e 5f c9 c3 0f 0b a5 00 91 bd 32 c0 e9 7a ff ff ff <0f>
> 0b a6 00 91 bd 32 c0 e9 74 ff ff ff 8d b4 26 00 00 00 00 8d
Ugh. Corrupted page allocator free lists. Could be anything.
Can you send the .config?
On 1/7/06, Andrew Morton <[email protected]> wrote:
> Jesper Juhl <[email protected]> wrote:
> >
> > On 1/7/06, Andrew Morton <[email protected]> wrote:
> > > Dave Jones <[email protected]> wrote:
> > > >
> > > > On Sat, Jan 07, 2006 at 01:25:22AM +0100, Jesper Juhl wrote:
> > > > > On 1/6/06, Andrew Morton <[email protected]> wrote:
> > > > > > Jesper Juhl <[email protected]> wrote:
> > > > > >
> > > > > > > Reverted that one patch, then rebuild/reinstalled the kernel
> > > > > > > (with the same .config) and booted it - no change. It still locks up
> > > > > > > in the exact same spot.
> > > > > > > X starts & runs fine (sort of) since I can play around at the kdm
> > > > > > > login screen all I want, it's only once I actually login and KDE
> > > > > > > proper starts that it locks up.
> > > > > >
> > > > > > Oh bugger. No serial console/netconsole or such?
> > > > > >
> > > > > > Or are you able log in and then quickly do the alt-ctrl-F1 thing, see if we
> > > > > > get an oops?
> > > > > >
> > > > > I switched to tty1 right after logging in, and after a few seconds
> > > > > (corresponding pretty well with the time it takes to hit the same spot
> > > > > where it crashed all previous times) I got a lot of nice crash info
> > > > > scrolling by.
> > > > > Actually a *lot* scrolled by, a rough guestimate says some 4-6 (maybe
> > > > > more) screens scrolled by, and since the box locks up solid I couldn't
> > > > > scroll up to get at the initial parts :( So all I have for you is the
> > > > > final block - hand copied from the screen using pen and paper
> > > > > ...
> > > > > It never makes it to the logs, and as mentioned previously I don't
> > > > > have another machine to capture on via netconsole or serial, so if you
> > > > > have any good ideas as to how to capture it all, then I'm all ears.
> > > >
> > > > If only someone did a patch to pause the text output after the first oops..
> > > >
> > > > Oh wait! Someone did!
> > > >
> > >
> > > umm, it'd be more helpful if you'd actually sent the patch so Jesper could
> > > apply it so we can find this bug.
> > >
> >
> > Ok, this is with a pristine 2.6.15-mm1 + Dave's oops-pausing-patch
> > Captured by switching to tty1 just after logging in via kdm.
> > A *lot* of info still scrolls down when the problem hits before Daves
> > patch stops it at a BUG dump, it scrolls by too fast for me to see
> > what it is, but I guess it must be warning/error messages other than
> > Oops's or BUG()'s ???
>
> There might be something wrong with Dave's patch. Or yes, this might be
> the first oops.
>
> > Anyway, here's the entire contents of my screen after Daves patch
> > stops the output - again written down by hand and then typed in from
> > my handwritten notes, so there may be typos, but I've tried to be
> > accurate.
> >
>
> Gad. That's a lot of work, thanks. Serial console is easier...
>
Yeah, serail console or netconsole is a *lot* easier, but
unfortunately not much use when you only have a single machine at hand
:(
> Is your screen set to 50 rows?
vga=791
> That helps. As does a digital camera.
>
A camera would indeed make things easier - if only I had one...
All I have for this is pen and paper :/
> >
> > 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > ------------{ cut here ]------------
> > kernel BUG at include/linux/list.h:166!
> > invalid opcode: 0000 [#1]
> > PREEMPT SMP
> > Last sysfs file: /class/vc/vcsa2/dev
> > Modules linked in: snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss
> > snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi snd_ac97_codec
> > snd_ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc
> > snd_util_mem snd_hwdep snd agpgart
> > CPU: 0
> > EIP: 0060:[<c01475f5>] Tainted: G B VLI
> > EFLAGS: 00010017 (2.6.15-mm1)
> > EIP is at __rmqueue+0xe5/0x100
> > eax: c0374dd4 ebx: c16ea018 ecx: 00000007 edx: c16ef018
> > esi: c0374e9c edi: c0374d80 ebp: f7ad0dac esp: f7ad0d90
> > ds: 007b es: 007b ss: 0068
> > Process syslogd (pid: 1038, threadinfo=f7ad0000 task=c21dfa90)
> > Stack: <0>00000001 c16ef000 c0374e9c 00000000 00000000 c0374dcc
> > 0000001f f7ad0dcc
> > <0>c0147642 c0374e40 00000000 c0374d80 c0374d80 c0374d80
> > c0374dc0 f7ad0e00
> > <0>c0147b1a c0374dcc c0179682 c21ce4d0 f7af1090 00000000
> > f7ad0f34 00000256
> > Call Trace:
> > [<c0103e4a>] show_stack+0x8a/0xa0
> > [<c0104060>] show_registers+0x1e0/0x250
> > [<c0104272>] die+0x112/0x1a0
> > [<c010437f>] do_trap+0x7f/0xc0
> > [<c0104693>] do_invalid_op+0xa3/0xb0
> > [<c0103b0b>] error_code+0x4f/0x54
> > [<c0147642>] rmqueue_bulk+0x32/0x60
> > [<c0147b1a>] buffered_rmqueue+0x12a/0x270
> > [<c0147db3>] get_page_from_freelist+0xa3/0xd0
> > [<c0147e2e>] __alloc_pages+0x4e/0x320
> > [<c015e00b>] kmem_getpages+0x3b/0xa0
> > [<c015eee2>] cache_grow+0xb2/0x170
> > [<c015f1a8>] cache_alloc_refill+0x208/0x250
> > [<c015f426>] kmem_cache_alloc+0x66/0x70
> > [<c011dc6b>] dup_task_struct+0x3b/0xf0
> > [<c011ea22>] copy_process+0x62/0xe70
> > [<c011f922>] do_fork+0x62/0x1a0
> > [<c0101b5f>] sys_clone+0x2f/0x40
> > [<c0103009>] syscall_call+0x7/0xb
> > Code: 13 89 5a 04 ff 43 08 89 70 0c 0f ba 28 0b 3b 75 f0 7f d3 8b 45
> > e8 83 c4 10 5b 5e 5f c9 c3 0f 0b a5 00 91 bd 32 c0 e9 7a ff ff ff <0f>
> > 0b a6 00 91 bd 32 c0 e9 74 ff ff ff 8d b4 26 00 00 00 00 8d
>
> Ugh. Corrupted page allocator free lists. Could be anything.
>
> Can you send the .config?
>
Here you are :
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-mm1
# Sat Jan 7 02:23:58 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=200
CONFIG_AIC7XXX_RESET_DELAY_MS=15001
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
CONFIG_SPI_ARCH_HAS_MASTER=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_IP is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=865
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On Sat, Jan 07, 2006 at 03:51:48AM +0100, Jesper Juhl wrote:
> Ok, this is with a pristine 2.6.15-mm1 + Dave's oops-pausing-patch
> Captured by switching to tty1 just after logging in via kdm.
> A *lot* of info still scrolls down when the problem hits before Daves
> patch stops it at a BUG dump, it scrolls by too fast for me to see
> what it is, but I guess it must be warning/error messages other than
> Oops's or BUG()'s ???
>
> Anyway, here's the entire contents of my screen after Daves patch
> stops the output - again written down by hand and then typed in from
> my handwritten notes, so there may be typos, but I've tried to be
> accurate.
>
>
> 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 0b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
My first thought was 'slab poison', but you don't have slab debugging turned on.
Randy's followup to my patch: http://lkml.org/lkml/2006/1/5/15
had another trick that may be useful. It'll slow down printk's
to a point where you might be able to see what happened.
another trick may be to just add a for (;;) into the BUG macro.
> ------------{ cut here ]------------
> kernel BUG at include/linux/list.h:166!
> invalid opcode: 0000 [#1]
> PREEMPT SMP
> Last sysfs file: /class/vc/vcsa2/dev
> Modules linked in: snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss
> snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi snd_ac97_codec
> snd_ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc
> snd_util_mem snd_hwdep snd agpgart
> CPU: 0
> EIP: 0060:[<c01475f5>] Tainted: G B VLI
Hmm, you had hit bad_page(), so that may be a more useful place
to add a pause.
Dave