2008-06-22 18:18:51

by FD Cami

[permalink] [raw]
Subject: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()


Hello,

This patch takes a shot at replacing the direct use of printk(KERN_WARNING)
in extX by extX_warning. We now get the device number in the warning message :
"EXT3-fs warning (device hda1): ext3_setup_super: maximal mount count reached, running e2fsck is recommended"
It also adds the device information on a pair of printk(KERN_ERR) (this was
first suggested by Kasper two weeks ago).
It also adds the device information on the "mounted filesystem" message :
"EXT3-fs: hda1 is now mounted with ordered data mode."
It also replaces some whitespaces by tabs to increase consistency within
super.c .
One unused variable was removed in ext4/super.c .

I will work on replacing all printks in ext3/ext4 in the coming days if no one
/ beats / already has beaten / me to it.

Compile tested on ext4, compiled and booted on ext3, however not all string
changes have been tested.

Signed-off-by: Francois Cami <[email protected]>

diff -uprN -X linux-2.6.26-rc7/Documentation/dontdiff linux-2.6.26-rc7-vanilla/fs/ext3/super.c linux-2.6.26-rc7/fs/ext3/super.c
--- linux-2.6.26-rc7-vanilla/fs/ext3/super.c 2008-06-22 14:54:22.000000000 +0200
+++ linux-2.6.26-rc7/fs/ext3/super.c 2008-06-22 19:51:41.000000000 +0200
@@ -305,9 +305,9 @@ void ext3_update_dynamic_rev(struct supe
return;

ext3_warning(sb, __func__,
- "updating to rev %d because of new feature flag, "
- "running e2fsck is recommended",
- EXT3_DYNAMIC_REV);
+ "updating to rev %d because of new feature flag, "
+ "running e2fsck is recommended",
+ EXT3_DYNAMIC_REV);

es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
@@ -1192,31 +1192,33 @@ static int ext3_setup_super(struct super
int res = 0;

if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
- printk (KERN_ERR "EXT3-fs warning: revision level too high, "
- "forcing read-only mode\n");
+ printk (KERN_ERR "EXT3-fs on %s warning: revision level too high, "
+ "forcing read-only mode\n", sb->s_id);
res = MS_RDONLY;
}
if (read_only)
return res;
if (!(sbi->s_mount_state & EXT3_VALID_FS))
- printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, "
- "running e2fsck is recommended\n");
+ ext3_warning(sb, __func__,
+ "mounting unchecked fs, running e2fsck is "
+ "recommended");
else if ((sbi->s_mount_state & EXT3_ERROR_FS))
- printk (KERN_WARNING
- "EXT3-fs warning: mounting fs with errors, "
- "running e2fsck is recommended\n");
+ ext3_warning(sb, __func__,
+ "mounting fs with errors, running e2fsck is "
+ "recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
- printk (KERN_WARNING
- "EXT3-fs warning: maximal mount count reached, "
- "running e2fsck is recommended\n");
+ ext3_warning(sb, __func__,
+ "maximal mount count reached, running e2fsck "
+ "is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= get_seconds()))
- printk (KERN_WARNING
- "EXT3-fs warning: checktime reached, "
- "running e2fsck is recommended\n");
+ ext3_warning(sb, __func__,
+ "checktime reached, running e2fsck is "
+ "recommended");
+
#if 0
/* @@@ We _will_ want to clear the valid bit if we find
inconsistencies, to force a fsck at reboot. But for
@@ -1342,8 +1344,8 @@ static void ext3_orphan_cleanup (struct
}

if (bdev_read_only(sb->s_bdev)) {
- printk(KERN_ERR "EXT3-fs: write access "
- "unavailable, skipping orphan cleanup.\n");
+ printk(KERN_ERR "EXT3-fs on %s: write access "
+ "unavailable, skipping orphan cleanup.\n", sb->s_id);
return;
}

@@ -1601,9 +1603,9 @@ static int ext3_fill_super (struct super
(EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- printk(KERN_WARNING
- "EXT3-fs warning: feature flags set on rev 0 fs, "
- "running e2fsck is recommended\n");
+ ext3_warning(sb, __func__,
+ "feature flags set on rev 0 fs, running "
+ "e2fsck is recommended");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
@@ -1737,8 +1739,7 @@ static int ext3_fill_super (struct super
printk(KERN_ERR "EXT3-fs: filesystem on %s:"
" too large to mount safely\n", sb->s_id);
if (sizeof(sector_t) < 8)
- printk(KERN_WARNING "EXT3-fs: CONFIG_LBD not "
- "enabled\n");
+ ext3_warning(sb, __func__, "CONFIG_LBD not enabled");
goto failed_mount;
}

@@ -1869,8 +1870,9 @@ static int ext3_fill_super (struct super

if (test_opt(sb, NOBH)) {
if (!(test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)) {
- printk(KERN_WARNING "EXT3-fs: Ignoring nobh option - "
- "its supported only with writeback mode\n");
+ ext3_warning(sb, __func__,
+ "Ignoring nobh option - it is only "
+ "supported with writeback mode");
clear_opt(sbi->s_mount_opt, NOBH);
}
}
@@ -1913,7 +1915,8 @@ static int ext3_fill_super (struct super
if (needs_recovery)
printk (KERN_INFO "EXT3-fs: recovery complete.\n");
ext3_mark_recovery_complete(sb, es);
- printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
+ printk (KERN_INFO "EXT3-fs: %s is now mounted with %s data mode.\n",
+ sb->s_id,
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
"writeback");
@@ -2301,11 +2304,12 @@ static void ext3_clear_journal_err(struc
char nbuf[16];

errstr = ext3_decode_error(sb, j_errno, nbuf);
- ext3_warning(sb, __func__, "Filesystem error recorded "
- "from previous mount: %s", errstr);
- ext3_warning(sb, __func__, "Marking fs in need of "
- "filesystem check.");
-
+ ext3_warning(sb, __func__,
+ "Filesystem error recorded from previous mount: %s",
+ errstr);
+ ext3_warning(sb, __func__,
+ "Marking fs in need of filesystem check.");
+
EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
es->s_state |= cpu_to_le16(EXT3_ERROR_FS);
ext3_commit_super (sb, es, 1);
@@ -2773,9 +2777,9 @@ static int ext3_quota_on(struct super_bl
}
/* Quotafile not in fs root? */
if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
- printk(KERN_WARNING
- "EXT3-fs: Quota file not on filesystem root. "
- "Journalled quota will not work.\n");
+ ext3_warning(sb, __func__,
+ "Quota file not on filesystem root. "
+ "Journalled quota will not work.");
path_put(&nd.path);
return vfs_quota_on(sb, type, format_id, path, remount);
}
@@ -2836,8 +2840,9 @@ static ssize_t ext3_quota_write(struct s
handle_t *handle = journal_current_handle();

if (!handle) {
- printk(KERN_WARNING "EXT3-fs: Quota write (off=%Lu, len=%Lu)"
- " cancelled because transaction is not started.\n",
+ ext3_warning(sb, __func__,
+ "Quota write (off=%Lu, len=%Lu) cancelled because "
+ "transaction is not started.",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
diff -uprN -X linux-2.6.26-rc7/Documentation/dontdiff linux-2.6.26-rc7-vanilla/fs/ext4/super.c linux-2.6.26-rc7/fs/ext4/super.c
--- linux-2.6.26-rc7-vanilla/fs/ext4/super.c 2008-06-22 14:54:24.000000000 +0200
+++ linux-2.6.26-rc7/fs/ext4/super.c 2008-06-22 19:56:24.000000000 +0200
@@ -355,9 +355,9 @@ void ext4_update_dynamic_rev(struct supe
return;

ext4_warning(sb, __func__,
- "updating to rev %d because of new feature flag, "
- "running e2fsck is recommended",
- EXT4_DYNAMIC_REV);
+ "updating to rev %d because of new feature flag, "
+ "running e2fsck is recommended",
+ EXT4_DYNAMIC_REV);

es->s_first_ino = cpu_to_le32(EXT4_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT4_GOOD_OLD_INODE_SIZE);
@@ -671,7 +671,6 @@ static int ext4_show_options(struct seq_
unsigned long def_mount_opts;
struct super_block *sb = vfs->mnt_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
- journal_t *journal = sbi->s_journal;
struct ext4_super_block *es = sbi->s_es;

def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
@@ -1388,24 +1387,25 @@ static int ext4_setup_super(struct super
if (read_only)
return res;
if (!(sbi->s_mount_state & EXT4_VALID_FS))
- printk (KERN_WARNING "EXT4-fs warning: mounting unchecked fs, "
- "running e2fsck is recommended\n");
+ ext4_warning(sb, __func__,
+ "mounting unchecked fs, running e2fsck is "
+ "recommended");
else if ((sbi->s_mount_state & EXT4_ERROR_FS))
- printk (KERN_WARNING
- "EXT4-fs warning: mounting fs with errors, "
- "running e2fsck is recommended\n");
+ ext4_warning(sb, __func__,
+ "mounting fs with errors, running e2fsck is "
+ "recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
- printk (KERN_WARNING
- "EXT4-fs warning: maximal mount count reached, "
- "running e2fsck is recommended\n");
+ ext4_warning(sb, __func__,
+ "maximal mount count reached, running e2fsck "
+ "is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= get_seconds()))
- printk (KERN_WARNING
- "EXT4-fs warning: checktime reached, "
- "running e2fsck is recommended\n");
+ ext4_warning(sb, __func__,
+ "checktime reached, running e2fsck is "
+ "recommended");
#if 0
/* @@@ We _will_ want to clear the valid bit if we find
* inconsistencies, to force a fsck at reboot. But for
@@ -1578,8 +1578,8 @@ static void ext4_orphan_cleanup (struct
}

if (bdev_read_only(sb->s_bdev)) {
- printk(KERN_ERR "EXT4-fs: write access "
- "unavailable, skipping orphan cleanup.\n");
+ printk(KERN_ERR "EXT4-fs on %s: write access "
+ "unavailable, skipping orphan cleanup.\n", sb->s_id);
return;
}

@@ -1939,17 +1939,17 @@ static int ext4_fill_super (struct super
(EXT4_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT4_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT4_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- printk(KERN_WARNING
- "EXT4-fs warning: feature flags set on rev 0 fs, "
- "running e2fsck is recommended\n");
+ ext4_warning(sb, __func__,
+ "feature flags set on rev 0 fs, running "
+ "e2fsck is recommended");

/*
* Since ext4 is still considered development code, we require
* that the TEST_FILESYS flag in s->flags be set.
*/
if (!(le32_to_cpu(es->s_flags) & EXT2_FLAGS_TEST_FILESYS)) {
- printk(KERN_WARNING "EXT4-fs: %s: not marked "
- "OK to use with test code.\n", sb->s_id);
+ ext4_warning(sb, __func__,
+ "not marked OK to use with test code.");
goto failed_mount;
}

@@ -2090,8 +2090,8 @@ static int ext4_fill_super (struct super
printk(KERN_ERR "EXT4-fs: filesystem on %s:"
" too large to mount safely\n", sb->s_id);
if (sizeof(sector_t) < 8)
- printk(KERN_WARNING "EXT4-fs: CONFIG_LBD not "
- "enabled\n");
+ ext4_warning(sb, __func__,
+ "CONFIG_LBD not enabled");
goto failed_mount;
}

@@ -2101,8 +2101,9 @@ static int ext4_fill_super (struct super
/* ensure blocks_count calculation below doesn't sign-extend */
if (ext4_blocks_count(es) + EXT4_BLOCKS_PER_GROUP(sb) <
le32_to_cpu(es->s_first_data_block) + 1) {
- printk(KERN_WARNING "EXT4-fs: bad geometry: block count %llu, "
- "first data block %u, blocks per group %lu\n",
+ ext4_warning(sb, __func__,
+ "bad geometry: block count %llu, first data block "
+ " %u, blocks per group %lu",
ext4_blocks_count(es),
le32_to_cpu(es->s_first_data_block),
EXT4_BLOCKS_PER_GROUP(sb));
@@ -2283,8 +2284,9 @@ static int ext4_fill_super (struct super

if (test_opt(sb, NOBH)) {
if (!(test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)) {
- printk(KERN_WARNING "EXT4-fs: Ignoring nobh option - "
- "its supported only with writeback mode\n");
+ ext4_warning(sb, __func__,
+ "Ignoring nobh option - it is only "
+ "supported with writeback mode");
clear_opt(sbi->s_mount_opt, NOBH);
}
}
@@ -2353,7 +2355,8 @@ static int ext4_fill_super (struct super
if (needs_recovery)
printk (KERN_INFO "EXT4-fs: recovery complete.\n");
ext4_mark_recovery_complete(sb, es);
- printk (KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n",
+ printk (KERN_INFO "EXT4-fs: %s is now mounted with %s data mode.\n",
+ sb->s_id,
test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal":
test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered":
"writeback");
@@ -2745,9 +2748,10 @@ static void ext4_clear_journal_err(struc

errstr = ext4_decode_error(sb, j_errno, nbuf);
ext4_warning(sb, __func__, "Filesystem error recorded "
- "from previous mount: %s", errstr);
+ "from previous mount: %s",
+ errstr);
ext4_warning(sb, __func__, "Marking fs in need of "
- "filesystem check.");
+ "filesystem check.");

EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
@@ -2916,10 +2920,10 @@ static int ext4_remount (struct super_bl
__le32 ret;
if ((ret = EXT4_HAS_RO_COMPAT_FEATURE(sb,
~EXT4_FEATURE_RO_COMPAT_SUPP))) {
- printk(KERN_WARNING "EXT4-fs: %s: couldn't "
- "remount RDWR because of unsupported "
- "optional features (%x).\n",
- sb->s_id, le32_to_cpu(ret));
+ ext4_warning(sb, __func__,
+ "could not remount RDWR because of "
+ "unsupported optional features (%x).",
+ le32_to_cpu(ret));
err = -EROFS;
goto restore_opts;
}
@@ -2930,11 +2934,10 @@ static int ext4_remount (struct super_bl
* require a full umount/remount for now.
*/
if (es->s_last_orphan) {
- printk(KERN_WARNING "EXT4-fs: %s: couldn't "
- "remount RDWR because of unprocessed "
- "orphan inode list. Please "
- "umount/remount instead.\n",
- sb->s_id);
+ ext4_warning(sb, __func__,
+ "could not remount RDWR because of "
+ "unprocessed orphan inode list. "
+ "Please umount/remount instead.");
err = -EINVAL;
goto restore_opts;
}
@@ -3219,9 +3222,9 @@ static int ext4_quota_on(struct super_bl
if (EXT4_SB(sb)->s_qf_names[type]) {
/* Quotafile not of fs root? */
if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
- printk(KERN_WARNING
- "EXT4-fs: Quota file not on filesystem root. "
- "Journaled quota will not work.\n");
+ ext4_warning(sb, __func__,
+ "Quota file not on filesystem root. "
+ "Journaled quota will not work.");
}

/*
@@ -3298,8 +3301,9 @@ static ssize_t ext4_quota_write(struct s
handle_t *handle = journal_current_handle();

if (!handle) {
- printk(KERN_WARNING "EXT4-fs: Quota write (off=%Lu, len=%Lu)"
- " cancelled because transaction is not started.\n",
+ ext4_warning(sb, __func__,
+ "Quota write (off=%Lu, len=%Lu) cancelled because "
+ "transaction is not started.",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}


2008-06-23 20:31:55

by Andreas Dilger

[permalink] [raw]
Subject: Re: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()

On Jun 22, 2008 20:18 +0200, FD Cami wrote:
> This patch takes a shot at replacing the direct use of printk(KERN_WARNING)
> in extX by extX_warning. We now get the device number in the warning message :
> "EXT3-fs warning (device hda1): ext3_setup_super: maximal mount count reached, running e2fsck is recommended"
> It also adds the device information on a pair of printk(KERN_ERR) (this was
> first suggested by Kasper two weeks ago).

The one issue is that KERN_ERR != KERN_WARNING, so these errors might
not be visible on the console, or may not be saved to the syslog. The
other minor difference is that the function name is also printed, and this
makes the error message very long.

One suggestion is to create a separate macro that passes the KERN_*
flag and __func__ to ext3_console_msg(), and call that from
ext3_warning() and a new ext3_start_error() function. I always found
it annoying to have to specify __func__ as a parameter for every call.

> ext3_warning(sb, __func__,
> - "updating to rev %d because of new feature flag, "
> - "running e2fsck is recommended",
> - EXT3_DYNAMIC_REV);
> + "updating to rev %d because of new feature flag, "
> + "running e2fsck is recommended",
> + EXT3_DYNAMIC_REV);

Please don't change all of the indenting. The old indending is proper
linux coding style (aligned with previous '('), the new one is not.

Note that you need to split up the patches for ext2, ext3, ext4 into
separate emails. I'd suggest just sending one of them until we agree
on what is right, then submitting the rest afterward.

Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.

2008-06-23 20:34:30

by Eric Sandeen

[permalink] [raw]
Subject: Re: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()

Andreas Dilger wrote:
> On Jun 22, 2008 20:18 +0200, FD Cami wrote:
>> This patch takes a shot at replacing the direct use of printk(KERN_WARNING)
>> in extX by extX_warning. We now get the device number in the warning message :
>> "EXT3-fs warning (device hda1): ext3_setup_super: maximal mount count reached, running e2fsck is recommended"
>> It also adds the device information on a pair of printk(KERN_ERR) (this was
>> first suggested by Kasper two weeks ago).
>
> The one issue is that KERN_ERR != KERN_WARNING, so these errors might
> not be visible on the console, or may not be saved to the syslog. The
> other minor difference is that the function name is also printed, and this
> makes the error message very long.
>
> One suggestion is to create a separate macro that passes the KERN_*
> flag and __func__ to ext3_console_msg(), and call that from
> ext3_warning() and a new ext3_start_error() function. I always found
> it annoying to have to specify __func__ as a parameter for every call.

I agree and meant to suggest that as well.

-Eric

2008-06-23 20:55:58

by Randy Dunlap

[permalink] [raw]
Subject: Re: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()

On Mon, 23 Jun 2008 14:31:07 -0600 Andreas Dilger wrote:

> On Jun 22, 2008 20:18 +0200, FD Cami wrote:
> > This patch takes a shot at replacing the direct use of printk(KERN_WARNING)
> > in extX by extX_warning. We now get the device number in the warning message :
> > "EXT3-fs warning (device hda1): ext3_setup_super: maximal mount count reached, running e2fsck is recommended"
> > It also adds the device information on a pair of printk(KERN_ERR) (this was
> > first suggested by Kasper two weeks ago).
>
> The one issue is that KERN_ERR != KERN_WARNING, so these errors might
> not be visible on the console, or may not be saved to the syslog. The
> other minor difference is that the function name is also printed, and this
> makes the error message very long.
>
> One suggestion is to create a separate macro that passes the KERN_*
> flag and __func__ to ext3_console_msg(), and call that from
> ext3_warning() and a new ext3_start_error() function. I always found
> it annoying to have to specify __func__ as a parameter for every call.
>
> > ext3_warning(sb, __func__,
> > - "updating to rev %d because of new feature flag, "
> > - "running e2fsck is recommended",
> > - EXT3_DYNAMIC_REV);
> > + "updating to rev %d because of new feature flag, "
> > + "running e2fsck is recommended",
> > + EXT3_DYNAMIC_REV);
>
> Please don't change all of the indenting. The old indending is proper
> linux coding style (aligned with previous '('), the new one is not.

Hi,
I don't mind which way it's done, but I'm curious: are you saying that aligning
with '(' is codified (e.g., in CodingStyle) or just that it's dominant?


> Note that you need to split up the patches for ext2, ext3, ext4 into
> separate emails. I'd suggest just sending one of them until we agree
> on what is right, then submitting the rest afterward.

Thanks,
---
~Randy
Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA
http://linuxplumbersconf.org/

2008-06-23 22:20:34

by FD Cami

[permalink] [raw]
Subject: Re: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()


Hi,

(Eric and Randy added as CC to keep track of this)

On Mon, 23 Jun 2008 14:31:07 -0600
Andreas Dilger <[email protected]> wrote:

> On Jun 22, 2008 20:18 +0200, FD Cami wrote:
> > This patch takes a shot at replacing the direct use of printk(KERN_WARNING)
> > in extX by extX_warning. We now get the device number in the warning message :
> > "EXT3-fs warning (device hda1): ext3_setup_super: maximal mount count reached, running e2fsck is recommended"
> > It also adds the device information on a pair of printk(KERN_ERR) (this was
> > first suggested by Kasper two weeks ago).
>
> The one issue is that KERN_ERR != KERN_WARNING, so these errors might
> not be visible on the console, or may not be saved to the syslog.

Hmmm, I did not replace any KERN_ERR by ext3_warning / KERN_WARNING, but
made those KERN_ERR calls more verbose. Does that change anything ?

For the record, I wanted to replace KERN_ERR calls by calls to a wrapper
much like ext3_warning (but obviously calling KERN_ERR), later on.

> The other minor difference is that the function name is also printed, and
> this makes the error message very long.

Ack, not pretty. Will fix that in next version.

> One suggestion is to create a separate macro that passes the KERN_*
> flag and __func__ to ext3_console_msg(), and call that from
> ext3_warning() and a new ext3_start_error() function. I always found
> it annoying to have to specify __func__ as a parameter for every call.

OK, will do. Thanks for the suggestion.

> > ext3_warning(sb, __func__,
> > - "updating to rev %d because of new feature flag, "
> > - "running e2fsck is recommended",
> > - EXT3_DYNAMIC_REV);
> > + "updating to rev %d because of new feature flag, "
> > + "running e2fsck is recommended",
> > + EXT3_DYNAMIC_REV);
>
> Please don't change all of the indenting. The old indending is proper
> linux coding style (aligned with previous '('), the new one is not.

Then this (old) coding style is not consistent within super.c , and not
consistent with the example given in Documentation/CodingStyle either.
I will "fix" the indentation in a separate patch for the whole file, to
be merged or not.

> Note that you need to split up the patches for ext2, ext3, ext4 into
> separate emails. I'd suggest just sending one of them until we agree
> on what is right, then submitting the rest afterward.

OK. I did ext3/ext4 at once because of what Andrew replied to Kasper :
"We like to keep ext3 and ext4 in sync as much as poss, please."
http://lkml.org/lkml/2008/6/9/79
But I can do ext3 first and then back / forward port to ext2 and ext4 as
well, as you suggest.

Thank you very much for replying.

Best,

Francois

2008-06-24 06:47:21

by Andreas Dilger

[permalink] [raw]
Subject: Re: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()

On Jun 23, 2008 13:38 -0700, Randy Dunlap wrote:
> On Mon, 23 Jun 2008 14:31:07 -0600 Andreas Dilger wrote:
> > > ext3_warning(sb, __func__,
> > > - "updating to rev %d because of new feature flag, "
> > > - "running e2fsck is recommended",
> > > - EXT3_DYNAMIC_REV);
> > > + "updating to rev %d because of new feature flag, "
> > > + "running e2fsck is recommended",
> > > + EXT3_DYNAMIC_REV);
> >
> > Please don't change all of the indenting. The old indending is proper
> > linux coding style (aligned with previous '('), the new one is not.
>
> Hi,
> I don't mind which way it's done, but I'm curious: are you saying that
> aligning with '(' is codified (e.g., in CodingStyle) or just that it's
> dominant?

You're right - it isn't in the Linux CodingStyle... It is the style
that we use for Lustre that explicitly requires aligning with '('.
The common stype definitely IS to align with the previous '(' if a line
is a continuation.

That said, it is IMHO bad form to go and change all of the indenting of
existing code with little reason to do so.

Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.

2008-06-24 06:53:50

by Andreas Dilger

[permalink] [raw]
Subject: Re: [PATCH] extX: convert prink(KERN_WARNING) to extX_warning()

On Jun 24, 2008 00:20 +0200, FD Cami wrote:
> On Mon, 23 Jun 2008 14:31:07 -0600
> Andreas Dilger <[email protected]> wrote:
> > The one issue is that KERN_ERR != KERN_WARNING, so these errors might
> > not be visible on the console, or may not be saved to the syslog.
>
> Hmmm, I did not replace any KERN_ERR by ext3_warning / KERN_WARNING, but
> made those KERN_ERR calls more verbose. Does that change anything ?

My apologies, when I started reading the patch I was thinking it
replaced all of the printk's in ext3_fill_super(), which it in fact
does not.

> For the record, I wanted to replace KERN_ERR calls by calls to a wrapper
> much like ext3_warning (but obviously calling KERN_ERR), later on.

OK, that's in line with what I was suggesting. Carry on :-).

> > Note that you need to split up the patches for ext2, ext3, ext4 into
> > separate emails. I'd suggest just sending one of them until we agree
> > on what is right, then submitting the rest afterward.
>
> OK. I did ext3/ext4 at once because of what Andrew replied to Kasper :
> "We like to keep ext3 and ext4 in sync as much as poss, please."
> http://lkml.org/lkml/2008/6/9/79
> But I can do ext3 first and then back / forward port to ext2 and ext4 as
> well, as you suggest.

Yes, it is definitely desirable to have patches for all of them, but
always in separate emails. If you feel the patches are ready to go,
then go ahead and send all 3 at once. I just thought it might save
some work and list traffic if we agree on one of the patches and then
produce the other two to match.

Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.