LinuxLists.cc - BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 12:25:37AM +0100, Simon Arlott wrote:
> http://img182.imageshack.us/img182/7205/1005489hh6.jpg
>
> .config attached
>
> --
> Simon Arlott

Looks like you don't have rfc3686(ctr(aes)) compiled in. Add CONFIG_CRYPTO_CTR
to your config, IIRC. I'll add a depends directive to Kconfig for that in my
next update.

thanks
Neil

> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.26
> # Tue Jul 15 00:01:17 2008
> #
> CONFIG_64BIT=y
> # CONFIG_X86_32 is not set
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> # CONFIG_GENERIC_LOCKBREAK is not set
> CONFIG_GENERIC_TIME=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_FAST_CMPXCHG_LOCAL=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> # CONFIG_GENERIC_GPIO is not set
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
> # CONFIG_ARCH_HAS_ILOG2_U32 is not set
> # CONFIG_ARCH_HAS_ILOG2_U64 is not set
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ZONE_DMA32=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_AOUT=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_X86_SMP=y
> CONFIG_X86_64_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_X86_TRAMPOLINE=y
> # CONFIG_KTIME_SCALAR is not set
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_TASKSTATS is not set
> # CONFIG_AUDIT is not set
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_LOG_BUF_SHIFT=20
> # CONFIG_CGROUPS is not set
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> # CONFIG_GROUP_SCHED is not set
> # CONFIG_SYSFS_DEPRECATED_V2 is not set
> CONFIG_RELAY=y
> CONFIG_NAMESPACES=y
> # CONFIG_UTS_NS is not set
> # CONFIG_IPC_NS is not set
> # CONFIG_USER_NS is not set
> # CONFIG_PID_NS is not set
> # CONFIG_BLK_DEV_INITRD is not set
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_SYSCTL_SYSCALL_CHECK=y
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> # CONFIG_COMPAT_BRK is not set
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_ANON_INODES=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLAB=y
> # CONFIG_SLUB is not set
> # CONFIG_SLOB is not set
> CONFIG_PROFILING=y
> # CONFIG_MARKERS is not set
> CONFIG_OPROFILE=m
> CONFIG_HAVE_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_KRETPROBES=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> # CONFIG_HAVE_DMA_ATTRS is not set
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> CONFIG_MODULE_FORCE_LOAD=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_BLK_DEV_BSG is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
> CONFIG_BLOCK_COMPAT=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> # CONFIG_IOSCHED_AS is not set
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_PREEMPT_NOTIFIERS=y
> CONFIG_CLASSIC_RCU=y
>
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_VSMP is not set
> # CONFIG_PARAVIRT_GUEST is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> CONFIG_MK8=y
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_CPU=y
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_INTERNODE_CACHE_BYTES=64
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_GART_IOMMU=y
> # CONFIG_CALGARY_IOMMU is not set
> CONFIG_AMD_IOMMU=y
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> # CONFIG_MAXSMP is not set
> CONFIG_NR_CPUS=8
> # CONFIG_SCHED_SMT is not set
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> # CONFIG_PREEMPT_RCU is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_MCE=y
> # CONFIG_X86_MCE_INTEL is not set
> CONFIG_X86_MCE_AMD=y
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_NUMA=y
> # CONFIG_K8_NUMA is not set
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_NODES_SPAN_OTHER_NODES=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=1
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_SELECT_MEMORY_MODEL=y
> # CONFIG_FLATMEM_MANUAL is not set
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> # CONFIG_MEMORY_HOTPLUG is not set
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_MIGRATION=y
> CONFIG_RESOURCES_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> # CONFIG_EFI is not set
> CONFIG_SECCOMP=y
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_SCHED_HRTICK=y
> # CONFIG_KEXEC is not set
> # CONFIG_CRASH_DUMP is not set
> CONFIG_PHYSICAL_START=0x200000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_COMPAT_VDSO is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SUSPEND is not set
> # CONFIG_HIBERNATION is not set
> CONFIG_ACPI=y
> # CONFIG_ACPI_PROCFS is not set
> # CONFIG_ACPI_PROCFS_POWER is not set
> CONFIG_ACPI_SYSFS_POWER=y
> # CONFIG_ACPI_PROC_EVENT is not set
> # CONFIG_ACPI_AC is not set
> # CONFIG_ACPI_BATTERY is not set
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> # CONFIG_ACPI_BAY is not set
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> # CONFIG_ACPI_WMI is not set
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> # CONFIG_ACPI_SBS is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=y
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
>
> #
> # CPUFreq processor drivers
> #
> # CONFIG_X86_ACPI_CPUFREQ is not set
> CONFIG_X86_POWERNOW_K8=y
> CONFIG_X86_POWERNOW_K8_ACPI=y
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
>
> #
> # shared options
> #
> # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> # CONFIG_CPU_IDLE is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> CONFIG_DMAR=y
> CONFIG_DMAR_GFX_WA=y
> CONFIG_DMAR_FLOPPY_WA=y
> CONFIG_PCIEPORTBUS=y
> CONFIG_PCIEAER=y
> CONFIG_PCIEASPM=y
> CONFIG_PCIEASPM_DEBUG=y
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_LEGACY=y
> # CONFIG_PCI_DEBUG is not set
> CONFIG_HT_IRQ=y
> CONFIG_ISA_DMA_API=y
> CONFIG_K8_NB=y
> # CONFIG_PCCARD is not set
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_COMPAT_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> CONFIG_SYSVIPC_COMPAT=y
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=m
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
> CONFIG_NET_KEY=m
> # CONFIG_NET_KEY_MIGRATE is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> # CONFIG_IP_ROUTE_VERBOSE is not set
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=m
> CONFIG_INET_IPCOMP=m
> CONFIG_INET_XFRM_TUNNEL=m
> CONFIG_INET_TUNNEL=m
> CONFIG_INET_XFRM_MODE_TRANSPORT=m
> CONFIG_INET_XFRM_MODE_TUNNEL=m
> CONFIG_INET_XFRM_MODE_BEET=m
> CONFIG_INET_LRO=m
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_TCP_CONG_WESTWOOD=y
> CONFIG_TCP_CONG_HTCP=y
> CONFIG_TCP_CONG_HSTCP=y
> CONFIG_TCP_CONG_HYBLA=y
> CONFIG_TCP_CONG_VEGAS=y
> CONFIG_TCP_CONG_SCALABLE=y
> CONFIG_TCP_CONG_LP=y
> CONFIG_TCP_CONG_VENO=y
> CONFIG_TCP_CONG_YEAH=y
> CONFIG_TCP_CONG_ILLINOIS=y
> # CONFIG_DEFAULT_BIC is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=y
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> CONFIG_IPV6_MIP6=m
> CONFIG_INET6_XFRM_TUNNEL=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> CONFIG_INET6_XFRM_MODE_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_BEET=m
> CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
> CONFIG_IPV6_SIT=m
> CONFIG_IPV6_NDISC_NODETYPE=y
> CONFIG_IPV6_TUNNEL=m
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_SUBTREES=y
> CONFIG_IPV6_MROUTE=y
> CONFIG_IPV6_PIMSM_V2=y
> # CONFIG_NETWORK_SECMARK is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=m
> # CONFIG_NETFILTER_NETLINK_QUEUE is not set
> # CONFIG_NETFILTER_NETLINK_LOG is not set
> CONFIG_NF_CONNTRACK=m
> CONFIG_NF_CT_ACCT=y
> CONFIG_NF_CONNTRACK_MARK=y
> CONFIG_NF_CONNTRACK_EVENTS=y
> CONFIG_NF_CT_PROTO_DCCP=m
> CONFIG_NF_CT_PROTO_GRE=m
> CONFIG_NF_CT_PROTO_SCTP=m
> CONFIG_NF_CT_PROTO_UDPLITE=m
> CONFIG_NF_CONNTRACK_AMANDA=m
> CONFIG_NF_CONNTRACK_FTP=m
> CONFIG_NF_CONNTRACK_H323=m
> CONFIG_NF_CONNTRACK_IRC=m
> CONFIG_NF_CONNTRACK_NETBIOS_NS=m
> CONFIG_NF_CONNTRACK_PPTP=m
> CONFIG_NF_CONNTRACK_SANE=m
> CONFIG_NF_CONNTRACK_SIP=m
> CONFIG_NF_CONNTRACK_TFTP=m
> CONFIG_NF_CT_NETLINK=m
> CONFIG_NETFILTER_XTABLES=m
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
> # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
> CONFIG_NETFILTER_XT_TARGET_RATEEST=m
> # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
> CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> CONFIG_NETFILTER_XT_MATCH_DCCP=m
> CONFIG_NETFILTER_XT_MATCH_DSCP=m
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> CONFIG_NETFILTER_XT_MATCH_HELPER=m
> CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
> CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> CONFIG_NETFILTER_XT_MATCH_MAC=m
> CONFIG_NETFILTER_XT_MATCH_MARK=m
> CONFIG_NETFILTER_XT_MATCH_OWNER=m
> CONFIG_NETFILTER_XT_MATCH_POLICY=m
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> CONFIG_NETFILTER_XT_MATCH_RATEEST=m
> CONFIG_NETFILTER_XT_MATCH_REALM=m
> CONFIG_NETFILTER_XT_MATCH_SCTP=m
> CONFIG_NETFILTER_XT_MATCH_STATE=m
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> CONFIG_NETFILTER_XT_MATCH_TIME=m
> CONFIG_NETFILTER_XT_MATCH_U32=m
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_CONNTRACK_IPV4=m
> CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> # CONFIG_IP_NF_QUEUE is not set
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_RECENT=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_AH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_ADDRTYPE=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_NF_NAT=m
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_TARGET_NETMAP=m
> CONFIG_NF_NAT_SNMP_BASIC=m
> CONFIG_NF_NAT_PROTO_DCCP=m
> CONFIG_NF_NAT_PROTO_GRE=m
> CONFIG_NF_NAT_PROTO_UDPLITE=m
> CONFIG_NF_NAT_PROTO_SCTP=m
> CONFIG_NF_NAT_FTP=m
> CONFIG_NF_NAT_IRC=m
> CONFIG_NF_NAT_TFTP=m
> CONFIG_NF_NAT_AMANDA=m
> CONFIG_NF_NAT_PPTP=m
> CONFIG_NF_NAT_H323=m
> CONFIG_NF_NAT_SIP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_TTL=m
> CONFIG_IP_NF_TARGET_CLUSTERIP=m
> CONFIG_IP_NF_RAW=m
> # CONFIG_IP_NF_ARPTABLES is not set
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_NF_CONNTRACK_IPV6=m
> # CONFIG_IP6_NF_QUEUE is not set
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_RT=m
> CONFIG_IP6_NF_MATCH_OPTS=m
> CONFIG_IP6_NF_MATCH_FRAG=m
> CONFIG_IP6_NF_MATCH_HL=m
> CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> CONFIG_IP6_NF_MATCH_AH=m
> CONFIG_IP6_NF_MATCH_MH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_TARGET_REJECT=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_HL=m
> CONFIG_IP6_NF_RAW=m
>
> #
> # Bridge: Netfilter Configuration
> #
> # CONFIG_BRIDGE_NF_EBTABLES is not set
> CONFIG_IP_DCCP=m
> CONFIG_INET_DCCP_DIAG=m
> CONFIG_IP_DCCP_ACKVEC=y
>
> #
> # DCCP CCIDs Configuration (EXPERIMENTAL)
> #
> CONFIG_IP_DCCP_CCID2=m
> # CONFIG_IP_DCCP_CCID2_DEBUG is not set
> CONFIG_IP_DCCP_CCID3=m
> # CONFIG_IP_DCCP_CCID3_DEBUG is not set
> CONFIG_IP_DCCP_CCID3_RTO=100
> CONFIG_IP_DCCP_TFRC_LIB=m
>
> #
> # DCCP Kernel Hacking
> #
> # CONFIG_IP_DCCP_DEBUG is not set
> # CONFIG_NET_DCCPPROBE is not set
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_TIPC is not set
> CONFIG_ATM=m
> # CONFIG_ATM_CLIP is not set
> # CONFIG_ATM_LANE is not set
> # CONFIG_ATM_BR2684 is not set
> CONFIG_BRIDGE=m
> CONFIG_VLAN_8021Q=m
> # CONFIG_DECNET is not set
> CONFIG_LLC=m
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_ATM=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_NETEM=m
> CONFIG_NET_SCH_INGRESS=m
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_FLOW=m
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=m
> CONFIG_NET_ACT_GACT=m
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=m
> CONFIG_NET_ACT_IPT=m
> CONFIG_NET_ACT_NAT=m
> CONFIG_NET_ACT_PEDIT=m
> CONFIG_NET_ACT_SIMP=m
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_SCH_FIFO=y
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
>
> #
> # Wireless
> #
> # CONFIG_CFG80211 is not set
> # CONFIG_WIRELESS_EXT is not set
> # CONFIG_MAC80211 is not set
> # CONFIG_IEEE80211 is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=m
> # CONFIG_MTD is not set
> # CONFIG_PARPORT is not set
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> CONFIG_BLK_DEV_FD=m
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_XIP is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_VIRTIO_BLK is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_MSI_LAPTOP is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_EEEPC_LAPTOP is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> CONFIG_HAVE_IDE=y
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> CONFIG_BLK_DEV_IDEACPI=y
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_PROC_FS=y
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_IDE_GENERIC is not set
> # CONFIG_BLK_DEV_PLATFORM is not set
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEDMA_SFF=y
>
> #
> # PCI IDE chipsets support
> #
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_IDEPCI_PCIBUS_ORDER is not set
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=y
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_IT8213 is not set
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_BLK_DEV_TC86C001 is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_BLK_DEV_HD_ONLY is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_TGT is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
> CONFIG_SCSI_WAIT_SCAN=m
>
> #
> # SCSI Transports
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> CONFIG_SCSI_SAS_ATTRS=y
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> CONFIG_SCSI_LOWLEVEL=y
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_AIC94XX is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> CONFIG_MEGARAID_SAS=y
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_MVSAS is not set
> # CONFIG_SCSI_STEX is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_QLA_ISCSI is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
> # CONFIG_SCSI_SRP is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=y
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
> # CONFIG_SATA_SVW is not set
> # CONFIG_ATA_PIIX is not set
> # CONFIG_SATA_MV is not set
> CONFIG_SATA_NV=y
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SX4 is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> # CONFIG_PATA_SCH is not set
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> # CONFIG_MD_RAID10 is not set
> CONFIG_MD_RAID456=y
> CONFIG_MD_RAID5_RESHAPE=y
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_DEBUG is not set
> CONFIG_DM_CRYPT=y
> CONFIG_DM_SNAPSHOT=y
> CONFIG_DM_MIRROR=y
> CONFIG_DM_ZERO=y
> # CONFIG_DM_MULTIPATH is not set
> # CONFIG_DM_DELAY is not set
> # CONFIG_DM_UEVENT is not set
> CONFIG_FUSION=y
> # CONFIG_FUSION_SPI is not set
> # CONFIG_FUSION_FC is not set
> CONFIG_FUSION_SAS=y
> CONFIG_FUSION_MAX_SGE=128
> CONFIG_FUSION_CTL=y
> # CONFIG_FUSION_LOGGING is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # Enable only one of the two stacks, unless you know what you are doing
> #
> # CONFIG_FIREWIRE is not set
> CONFIG_IEEE1394=y
> CONFIG_IEEE1394_OHCI1394=y
> # CONFIG_IEEE1394_PCILYNX is not set
> CONFIG_IEEE1394_SBP2=y
> # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
> CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
> CONFIG_IEEE1394_ETH1394=y
> CONFIG_IEEE1394_RAWIO=y
> CONFIG_IEEE1394_VIDEO1394=y
> # CONFIG_IEEE1394_DV1394 is not set
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_I2O is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_NETDEVICES_MULTIQUEUE=y
> CONFIG_IFB=m
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> CONFIG_MACVLAN=m
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_ARCNET is not set
> CONFIG_PHYLIB=m
>
> #
> # MII PHY device drivers
> #
> CONFIG_MARVELL_PHY=m
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_QSEMI_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_CICADA_PHY is not set
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_SMSC_PHY is not set
> # CONFIG_BROADCOM_PHY is not set
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> CONFIG_FORCEDETH=y
> CONFIG_FORCEDETH_NAPI=y
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_R6040 is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_SC92031 is not set
> CONFIG_NETDEV_1000=y
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> CONFIG_E1000_NAPI=y
> # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_E1000E is not set
> # CONFIG_E1000E_ENABLED is not set
> # CONFIG_IP1000 is not set
> # CONFIG_IGB is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
> # CONFIG_QLA3XXX is not set
> # CONFIG_ATL1 is not set
> # CONFIG_NETDEV_10000 is not set
> # CONFIG_TR is not set
>
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> # CONFIG_WLAN_80211 is not set
> # CONFIG_IWLWIFI_LEDS is not set
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> # CONFIG_WAN is not set
> CONFIG_ATM_DRIVERS=y
> # CONFIG_ATM_DUMMY is not set
> # CONFIG_ATM_TCP is not set
> # CONFIG_ATM_LANAI is not set
> # CONFIG_ATM_ENI is not set
> # CONFIG_ATM_FIRESTREAM is not set
> # CONFIG_ATM_ZATM is not set
> # CONFIG_ATM_IDT77252 is not set
> # CONFIG_ATM_AMBASSADOR is not set
> # CONFIG_ATM_HORIZON is not set
> # CONFIG_ATM_FORE200E_MAYBE is not set
> # CONFIG_ATM_HE is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPP_MPPE=m
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> CONFIG_PPPOL2TP=m
> # CONFIG_SLIP is not set
> CONFIG_SLHC=m
> # CONFIG_NET_FC is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_VIRTIO_NET is not set
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> # CONFIG_INPUT_POLLDEV is not set
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> # CONFIG_DEVKMEM is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> # CONFIG_NOZOMI is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> # CONFIG_IPMI_HANDLER is not set
> # CONFIG_HW_RANDOM is not set
> CONFIG_NVRAM=m
> CONFIG_RTC=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> CONFIG_HPET_RTC_IRQ=y
> CONFIG_HPET_MMAP=y
> CONFIG_HANGCHECK_TIMER=y
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_ALGOBIT=m
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_I810 is not set
> # CONFIG_I2C_PIIX4 is not set
> CONFIG_I2C_NFORCE2=y
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_I2C_SIMTEC is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_I2C_TINY_USB is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> # CONFIG_I2C_VOODOO3 is not set
> # CONFIG_I2C_PCA_PLATFORM is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_PCF8575 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> # CONFIG_SPI is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=y
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7473 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_CORETEMP is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> CONFIG_SENSORS_LM85=y
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> CONFIG_SENSORS_DME1737=m
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_THERMAL=y
> CONFIG_THERMAL_HWMON=y
> # CONFIG_WATCHDOG is not set
>
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB_POSSIBLE=y
> # CONFIG_SSB is not set
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
>
> #
> # Multimedia devices
> #
>
> #
> # Multimedia core support
> #
> CONFIG_VIDEO_DEV=y
> CONFIG_VIDEO_V4L2_COMMON=y
> # CONFIG_VIDEO_ALLOW_V4L1 is not set
> CONFIG_VIDEO_V4L1_COMPAT=y
> CONFIG_DVB_CORE=y
> CONFIG_VIDEO_MEDIA=y
>
> #
> # Multimedia drivers
> #
> # CONFIG_MEDIA_ATTACH is not set
> CONFIG_MEDIA_TUNER=y
> CONFIG_MEDIA_TUNER_CUSTOMIZE=y
> # CONFIG_MEDIA_TUNER_SIMPLE is not set
> # CONFIG_MEDIA_TUNER_TDA8290 is not set
> # CONFIG_MEDIA_TUNER_TDA827X is not set
> # CONFIG_MEDIA_TUNER_TDA18271 is not set
> CONFIG_MEDIA_TUNER_TDA9887=y
> # CONFIG_MEDIA_TUNER_TEA5761 is not set
> # CONFIG_MEDIA_TUNER_TEA5767 is not set
> CONFIG_MEDIA_TUNER_MT20XX=y
> # CONFIG_MEDIA_TUNER_MT2060 is not set
> # CONFIG_MEDIA_TUNER_MT2266 is not set
> # CONFIG_MEDIA_TUNER_MT2131 is not set
> # CONFIG_MEDIA_TUNER_QT1010 is not set
> # CONFIG_MEDIA_TUNER_XC2028 is not set
> # CONFIG_MEDIA_TUNER_XC5000 is not set
> # CONFIG_MEDIA_TUNER_MXL5005S is not set
> CONFIG_VIDEO_V4L2=y
> CONFIG_VIDEOBUF_GEN=y
> CONFIG_VIDEOBUF_DMA_SG=y
> CONFIG_VIDEOBUF_DVB=y
> CONFIG_VIDEO_IR_I2C=y
> CONFIG_VIDEO_IR=y
> CONFIG_VIDEO_TVEEPROM=y
> CONFIG_VIDEO_TUNER=y
> CONFIG_VIDEO_CAPTURE_DRIVERS=y
> # CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
>
> #
> # Encoders/decoders and other helper chips
> #
>
> #
> # Audio decoders
> #
> # CONFIG_VIDEO_TVAUDIO is not set
> # CONFIG_VIDEO_TDA7432 is not set
> # CONFIG_VIDEO_TDA9840 is not set
> # CONFIG_VIDEO_TDA9875 is not set
> # CONFIG_VIDEO_TEA6415C is not set
> # CONFIG_VIDEO_TEA6420 is not set
> # CONFIG_VIDEO_MSP3400 is not set
> # CONFIG_VIDEO_CS5345 is not set
> # CONFIG_VIDEO_CS53L32A is not set
> # CONFIG_VIDEO_M52790 is not set
> # CONFIG_VIDEO_TLV320AIC23B is not set
> # CONFIG_VIDEO_WM8775 is not set
> # CONFIG_VIDEO_WM8739 is not set
> # CONFIG_VIDEO_VP27SMPX is not set
>
> #
> # Video decoders
> #
> # CONFIG_VIDEO_OV7670 is not set
> # CONFIG_VIDEO_TCM825X is not set
> # CONFIG_VIDEO_SAA711X is not set
> # CONFIG_VIDEO_SAA717X is not set
> # CONFIG_VIDEO_TVP5150 is not set
>
> #
> # Video and audio decoders
> #
> # CONFIG_VIDEO_CX25840 is not set
>
> #
> # MPEG video encoders
> #
> # CONFIG_VIDEO_CX2341X is not set
>
> #
> # Video encoders
> #
> # CONFIG_VIDEO_SAA7127 is not set
>
> #
> # Video improvement chips
> #
> # CONFIG_VIDEO_UPD64031A is not set
> # CONFIG_VIDEO_UPD64083 is not set
> # CONFIG_VIDEO_VIVI is not set
> # CONFIG_VIDEO_BT848 is not set
> # CONFIG_VIDEO_SAA5246A is not set
> # CONFIG_VIDEO_SAA5249 is not set
> CONFIG_VIDEO_SAA7134=y
> CONFIG_VIDEO_SAA7134_ALSA=y
> CONFIG_VIDEO_SAA7134_DVB=y
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
> # CONFIG_VIDEO_CX88 is not set
> # CONFIG_VIDEO_CX23885 is not set
> # CONFIG_VIDEO_AU0828 is not set
> # CONFIG_VIDEO_CX18 is not set
> # CONFIG_VIDEO_CAFE_CCIC is not set
> # CONFIG_V4L_USB_DRIVERS is not set
> # CONFIG_SOC_CAMERA is not set
> # CONFIG_RADIO_ADAPTERS is not set
> CONFIG_DVB_CAPTURE_DRIVERS=y
>
> #
> # Supported SAA7146 based PCI Adapters
> #
> # CONFIG_TTPCI_EEPROM is not set
> # CONFIG_DVB_AV7110 is not set
> # CONFIG_DVB_BUDGET_CORE is not set
>
> #
> # Supported USB Adapters
> #
> # CONFIG_DVB_USB is not set
> # CONFIG_DVB_TTUSB_BUDGET is not set
> # CONFIG_DVB_TTUSB_DEC is not set
> # CONFIG_DVB_CINERGYT2 is not set
>
> #
> # Supported FlexCopII (B2C2) Adapters
> #
> # CONFIG_DVB_B2C2_FLEXCOP is not set
>
> #
> # Supported BT878 Adapters
> #
>
> #
> # Supported Pluto2 Adapters
> #
> # CONFIG_DVB_PLUTO2 is not set
>
> #
> # Supported DVB Frontends
> #
>
> #
> # Customise DVB Frontends
> #
> CONFIG_DVB_FE_CUSTOMISE=y
>
> #
> # DVB-S (satellite) frontends
> #
> # CONFIG_DVB_CX24110 is not set
> # CONFIG_DVB_CX24123 is not set
> # CONFIG_DVB_MT312 is not set
> # CONFIG_DVB_S5H1420 is not set
> # CONFIG_DVB_STV0299 is not set
> # CONFIG_DVB_TDA8083 is not set
> # CONFIG_DVB_TDA10086 is not set
> # CONFIG_DVB_VES1X93 is not set
> # CONFIG_DVB_TUNER_ITD1000 is not set
> # CONFIG_DVB_TDA826X is not set
> # CONFIG_DVB_TUA6100 is not set
>
> #
> # DVB-T (terrestrial) frontends
> #
> # CONFIG_DVB_SP8870 is not set
> # CONFIG_DVB_SP887X is not set
> # CONFIG_DVB_CX22700 is not set
> # CONFIG_DVB_CX22702 is not set
> # CONFIG_DVB_L64781 is not set
> # CONFIG_DVB_TDA1004X is not set
> # CONFIG_DVB_NXT6000 is not set
> CONFIG_DVB_MT352=y
> # CONFIG_DVB_ZL10353 is not set
> # CONFIG_DVB_DIB3000MB is not set
> # CONFIG_DVB_DIB3000MC is not set
> # CONFIG_DVB_DIB7000M is not set
> # CONFIG_DVB_DIB7000P is not set
> # CONFIG_DVB_TDA10048 is not set
>
> #
> # DVB-C (cable) frontends
> #
> # CONFIG_DVB_VES1820 is not set
> # CONFIG_DVB_TDA10021 is not set
> # CONFIG_DVB_TDA10023 is not set
> # CONFIG_DVB_STV0297 is not set
>
> #
> # ATSC (North American/Korean Terrestrial/Cable DTV) frontends
> #
> # CONFIG_DVB_NXT200X is not set
> # CONFIG_DVB_OR51211 is not set
> # CONFIG_DVB_OR51132 is not set
> # CONFIG_DVB_BCM3510 is not set
> # CONFIG_DVB_LGDT330X is not set
> # CONFIG_DVB_S5H1409 is not set
> # CONFIG_DVB_AU8522 is not set
> # CONFIG_DVB_S5H1411 is not set
>
> #
> # Digital terrestrial only tuners/PLL
> #
> # CONFIG_DVB_PLL is not set
> # CONFIG_DVB_TUNER_DIB0070 is not set
>
> #
> # SEC control devices for DVB-S
> #
> # CONFIG_DVB_LNBP21 is not set
> # CONFIG_DVB_ISL6405 is not set
> # CONFIG_DVB_ISL6421 is not set
> # CONFIG_DAB is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_VIA is not set
> CONFIG_DRM=m
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> CONFIG_FB=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_FB_DDC=m
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_BACKLIGHT=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_VESA=y
> # CONFIG_FB_EFI is not set
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_LE80578 is not set
> # CONFIG_FB_INTEL is not set
> # CONFIG_FB_MATROX is not set
> CONFIG_FB_RADEON=m
> CONFIG_FB_RADEON_I2C=y
> CONFIG_FB_RADEON_BACKLIGHT=y
> # CONFIG_FB_RADEON_DEBUG is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> # CONFIG_LCD_CLASS_DEVICE is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> # CONFIG_BACKLIGHT_CORGI is not set
> # CONFIG_BACKLIGHT_PROGEAR is not set
>
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
> CONFIG_VIDEO_SELECT=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_LOGO is not set
> CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_HWDEP=y
> CONFIG_SND_RAWMIDI=y
> CONFIG_SND_SEQUENCER=y
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=y
> CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> CONFIG_SND_DYNAMIC_MINORS=y
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_MPU401_UART=y
> CONFIG_SND_OPL3_LIB=y
> CONFIG_SND_DRIVERS=y
> # CONFIG_SND_PCSP is not set
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> CONFIG_SND_PCI=y
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS300 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AW2 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> CONFIG_SND_CMIPCI=y
> # CONFIG_SND_OXYGEN is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS5530 is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_HDA_INTEL is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_HIFIER is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VIRTUOSO is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
> CONFIG_SND_USB=y
> CONFIG_SND_USB_AUDIO=y
> # CONFIG_SND_USB_USX2Y is not set
> # CONFIG_SND_USB_CAIAQ is not set
> # CONFIG_SND_SOC is not set
> # CONFIG_SOUND_PRIME is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> # CONFIG_HID_DEBUG is not set
> CONFIG_HIDRAW=y
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT_POWERBOOK=y
> # CONFIG_HID_FF is not set
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> CONFIG_USB_DEBUG=y
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_DEVICE_CLASS is not set
> CONFIG_USB_DYNAMIC_MINORS=y
> CONFIG_USB_SUSPEND=y
> # CONFIG_USB_OTG is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> # CONFIG_USB_UHCI_HCD is not set
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=y
> # CONFIG_USB_WDM is not set
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
>
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> CONFIG_USB_LIBUSUAL=y
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> CONFIG_USB_MON=y
>
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_BERRY_CHARGE is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGET is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> CONFIG_USB_ATM=m
> # CONFIG_USB_SPEEDTOUCH is not set
> CONFIG_USB_CXACRU=m
> # CONFIG_USB_UEAGLEATM is not set
> # CONFIG_USB_XUSBATM is not set
> # CONFIG_USB_GADGET is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> # CONFIG_NEW_LEDS is not set
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=y
> # CONFIG_EDAC_E752X is not set
> # CONFIG_EDAC_I82975X is not set
> # CONFIG_EDAC_I3000 is not set
> # CONFIG_EDAC_I5000 is not set
> # CONFIG_RTC_CLASS is not set
> # CONFIG_DMADEVICES is not set
> # CONFIG_UIO is not set
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> CONFIG_FIRMWARE_MEMMAP=y
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> CONFIG_DMIID=y
> # CONFIG_ISCSI_IBFT_FIND is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> # CONFIG_EXT2_FS_SECURITY is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> # CONFIG_EXT4DEV_FS is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> CONFIG_FUSE_FS=m
> CONFIG_GENERIC_ACL=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=850
> CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
> CONFIG_NTFS_FS=y
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=m
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=y
> CONFIG_NFSD=m
> CONFIG_NFSD_V2_ACL=y
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V3_ACL=y
> CONFIG_NFSD_V4=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_NFS_ACL_SUPPORT=m
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=m
> CONFIG_SUNRPC_GSS=m
> # CONFIG_SUNRPC_BIND34 is not set
> CONFIG_RPCSEC_GSS_KRB5=m
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> # CONFIG_CIFS_WEAK_PW_HASH is not set
> CONFIG_CIFS_XATTR=y
> CONFIG_CIFS_POSIX=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_BSD_DISKLABEL is not set
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> # CONFIG_LDM_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_KARMA_PARTITION is not set
> # CONFIG_EFI_PARTITION is not set
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=m
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> CONFIG_DLM=m
> # CONFIG_DLM_DEBUG is not set
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_ENABLE_WARN_DEPRECATED=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_UNUSED_SYMBOLS=y
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_SCHED_DEBUG is not set
> # CONFIG_SCHEDSTATS is not set
> CONFIG_TIMER_STATS=y
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_PREEMPT is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_SG is not set
> CONFIG_FRAME_POINTER=y
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_LKDTM is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> CONFIG_NONPROMISC_DEVMEM=y
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> CONFIG_DIRECT_GBPAGES=y
> # CONFIG_DEBUG_RODATA_TEST is not set
> # CONFIG_DEBUG_NX_TEST is not set
> # CONFIG_IOMMU_DEBUG is not set
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> # CONFIG_IO_DELAY_0X80 is not set
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> CONFIG_IO_DELAY_NONE=y
> CONFIG_DEFAULT_IO_DELAY_TYPE=3
> # CONFIG_DEBUG_BOOT_PARAMS is not set
> # CONFIG_CPA_DEBUG is not set
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> # CONFIG_SECURITY_FILE_CAPABILITIES is not set
> CONFIG_XOR_BLOCKS=y
> CONFIG_ASYNC_CORE=y
> CONFIG_ASYNC_MEMCPY=y
> CONFIG_ASYNC_XOR=y
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_GF128MUL=m
> # CONFIG_CRYPTO_NULL is not set
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> # CONFIG_CRYPTO_SEQIV is not set
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> # CONFIG_CRYPTO_CTR is not set
> # CONFIG_CRYPTO_CTS is not set
> CONFIG_CRYPTO_ECB=m
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_PCBC is not set
> # CONFIG_CRYPTO_XTS is not set
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_XCBC is not set
>
> #
> # Digest
> #
> # CONFIG_CRYPTO_CRC32C is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> CONFIG_CRYPTO_RMD128=y
> CONFIG_CRYPTO_RMD160=y
> CONFIG_CRYPTO_RMD256=y
> CONFIG_CRYPTO_RMD320=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> # CONFIG_CRYPTO_TGR192 is not set
> # CONFIG_CRYPTO_WP512 is not set
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_X86_64=y
> # CONFIG_CRYPTO_ANUBIS is not set
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_BLOWFISH=y
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> CONFIG_CRYPTO_DES=m
> # CONFIG_CRYPTO_FCRYPT is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> # CONFIG_CRYPTO_SEED is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> CONFIG_CRYPTO_TWOFISH_COMMON=y
> CONFIG_CRYPTO_TWOFISH_X86_64=y
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=m
> CONFIG_CRYPTO_LZO=y
>
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_PRNG=y
> # CONFIG_CRYPTO_HW is not set
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_KVM=m
> # CONFIG_KVM_INTEL is not set
> CONFIG_KVM_AMD=m
> CONFIG_VIRTIO=m
> CONFIG_VIRTIO_RING=m
> # CONFIG_VIRTIO_PCI is not set
> CONFIG_VIRTIO_BALLOON=m
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> CONFIG_CRC_CCITT=m
> # CONFIG_CRC16 is not set
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=m
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y

--
/***************************************************
*Neil Horman
*[email protected]
*gpg keyid: 1024D / 0x92A74FA1
*http://pgp.mit.edu
***************************************************/

2008-07-15 02:17:31

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 12:25:37AM +0100, Simon Arlott wrote:
> http://img182.imageshack.us/img182/7205/1005489hh6.jpg
>
> .config attached
>
> --
> Simon Arlott

You don't have CONFIG_CRYPTO_CTR set, and prng is failing because it can
allocate a tfm for algorithm rfc3868(ctr(aes)). I'll add a Kconfig depends for
that in my next update, but if you define CRYPTO_CTR it should work

Best
Neil

> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.26
> # Tue Jul 15 00:01:17 2008
> #
> CONFIG_64BIT=y
> # CONFIG_X86_32 is not set
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> # CONFIG_GENERIC_LOCKBREAK is not set
> CONFIG_GENERIC_TIME=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_FAST_CMPXCHG_LOCAL=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> # CONFIG_GENERIC_GPIO is not set
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
> # CONFIG_ARCH_HAS_ILOG2_U32 is not set
> # CONFIG_ARCH_HAS_ILOG2_U64 is not set
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ZONE_DMA32=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_AOUT=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_X86_SMP=y
> CONFIG_X86_64_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_X86_TRAMPOLINE=y
> # CONFIG_KTIME_SCALAR is not set
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_TASKSTATS is not set
> # CONFIG_AUDIT is not set
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_LOG_BUF_SHIFT=20
> # CONFIG_CGROUPS is not set
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> # CONFIG_GROUP_SCHED is not set
> # CONFIG_SYSFS_DEPRECATED_V2 is not set
> CONFIG_RELAY=y
> CONFIG_NAMESPACES=y
> # CONFIG_UTS_NS is not set
> # CONFIG_IPC_NS is not set
> # CONFIG_USER_NS is not set
> # CONFIG_PID_NS is not set
> # CONFIG_BLK_DEV_INITRD is not set
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_SYSCTL_SYSCALL_CHECK=y
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> # CONFIG_COMPAT_BRK is not set
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_ANON_INODES=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLAB=y
> # CONFIG_SLUB is not set
> # CONFIG_SLOB is not set
> CONFIG_PROFILING=y
> # CONFIG_MARKERS is not set
> CONFIG_OPROFILE=m
> CONFIG_HAVE_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_KRETPROBES=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> # CONFIG_HAVE_DMA_ATTRS is not set
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> CONFIG_MODULE_FORCE_LOAD=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_BLK_DEV_BSG is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
> CONFIG_BLOCK_COMPAT=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> # CONFIG_IOSCHED_AS is not set
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_PREEMPT_NOTIFIERS=y
> CONFIG_CLASSIC_RCU=y
>
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_VSMP is not set
> # CONFIG_PARAVIRT_GUEST is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> CONFIG_MK8=y
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_CPU=y
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_INTERNODE_CACHE_BYTES=64
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_GART_IOMMU=y
> # CONFIG_CALGARY_IOMMU is not set
> CONFIG_AMD_IOMMU=y
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> # CONFIG_MAXSMP is not set
> CONFIG_NR_CPUS=8
> # CONFIG_SCHED_SMT is not set
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> # CONFIG_PREEMPT_RCU is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_MCE=y
> # CONFIG_X86_MCE_INTEL is not set
> CONFIG_X86_MCE_AMD=y
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_NUMA=y
> # CONFIG_K8_NUMA is not set
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_NODES_SPAN_OTHER_NODES=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=1
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_SELECT_MEMORY_MODEL=y
> # CONFIG_FLATMEM_MANUAL is not set
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> # CONFIG_MEMORY_HOTPLUG is not set
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_MIGRATION=y
> CONFIG_RESOURCES_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> # CONFIG_EFI is not set
> CONFIG_SECCOMP=y
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_SCHED_HRTICK=y
> # CONFIG_KEXEC is not set
> # CONFIG_CRASH_DUMP is not set
> CONFIG_PHYSICAL_START=0x200000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_COMPAT_VDSO is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SUSPEND is not set
> # CONFIG_HIBERNATION is not set
> CONFIG_ACPI=y
> # CONFIG_ACPI_PROCFS is not set
> # CONFIG_ACPI_PROCFS_POWER is not set
> CONFIG_ACPI_SYSFS_POWER=y
> # CONFIG_ACPI_PROC_EVENT is not set
> # CONFIG_ACPI_AC is not set
> # CONFIG_ACPI_BATTERY is not set
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> # CONFIG_ACPI_BAY is not set
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> # CONFIG_ACPI_WMI is not set
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> # CONFIG_ACPI_SBS is not set
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=y
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
>
> #
> # CPUFreq processor drivers
> #
> # CONFIG_X86_ACPI_CPUFREQ is not set
> CONFIG_X86_POWERNOW_K8=y
> CONFIG_X86_POWERNOW_K8_ACPI=y
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
>
> #
> # shared options
> #
> # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> # CONFIG_CPU_IDLE is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> CONFIG_DMAR=y
> CONFIG_DMAR_GFX_WA=y
> CONFIG_DMAR_FLOPPY_WA=y
> CONFIG_PCIEPORTBUS=y
> CONFIG_PCIEAER=y
> CONFIG_PCIEASPM=y
> CONFIG_PCIEASPM_DEBUG=y
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_LEGACY=y
> # CONFIG_PCI_DEBUG is not set
> CONFIG_HT_IRQ=y
> CONFIG_ISA_DMA_API=y
> CONFIG_K8_NB=y
> # CONFIG_PCCARD is not set
> # CONFIG_HOTPLUG_PCI is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_COMPAT_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> CONFIG_SYSVIPC_COMPAT=y
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=m
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
> CONFIG_NET_KEY=m
> # CONFIG_NET_KEY_MIGRATE is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> # CONFIG_IP_ROUTE_VERBOSE is not set
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=m
> CONFIG_INET_IPCOMP=m
> CONFIG_INET_XFRM_TUNNEL=m
> CONFIG_INET_TUNNEL=m
> CONFIG_INET_XFRM_MODE_TRANSPORT=m
> CONFIG_INET_XFRM_MODE_TUNNEL=m
> CONFIG_INET_XFRM_MODE_BEET=m
> CONFIG_INET_LRO=m
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_TCP_CONG_WESTWOOD=y
> CONFIG_TCP_CONG_HTCP=y
> CONFIG_TCP_CONG_HSTCP=y
> CONFIG_TCP_CONG_HYBLA=y
> CONFIG_TCP_CONG_VEGAS=y
> CONFIG_TCP_CONG_SCALABLE=y
> CONFIG_TCP_CONG_LP=y
> CONFIG_TCP_CONG_VENO=y
> CONFIG_TCP_CONG_YEAH=y
> CONFIG_TCP_CONG_ILLINOIS=y
> # CONFIG_DEFAULT_BIC is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=y
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> CONFIG_IPV6_MIP6=m
> CONFIG_INET6_XFRM_TUNNEL=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> CONFIG_INET6_XFRM_MODE_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_BEET=m
> CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
> CONFIG_IPV6_SIT=m
> CONFIG_IPV6_NDISC_NODETYPE=y
> CONFIG_IPV6_TUNNEL=m
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_SUBTREES=y
> CONFIG_IPV6_MROUTE=y
> CONFIG_IPV6_PIMSM_V2=y
> # CONFIG_NETWORK_SECMARK is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=m
> # CONFIG_NETFILTER_NETLINK_QUEUE is not set
> # CONFIG_NETFILTER_NETLINK_LOG is not set
> CONFIG_NF_CONNTRACK=m
> CONFIG_NF_CT_ACCT=y
> CONFIG_NF_CONNTRACK_MARK=y
> CONFIG_NF_CONNTRACK_EVENTS=y
> CONFIG_NF_CT_PROTO_DCCP=m
> CONFIG_NF_CT_PROTO_GRE=m
> CONFIG_NF_CT_PROTO_SCTP=m
> CONFIG_NF_CT_PROTO_UDPLITE=m
> CONFIG_NF_CONNTRACK_AMANDA=m
> CONFIG_NF_CONNTRACK_FTP=m
> CONFIG_NF_CONNTRACK_H323=m
> CONFIG_NF_CONNTRACK_IRC=m
> CONFIG_NF_CONNTRACK_NETBIOS_NS=m
> CONFIG_NF_CONNTRACK_PPTP=m
> CONFIG_NF_CONNTRACK_SANE=m
> CONFIG_NF_CONNTRACK_SIP=m
> CONFIG_NF_CONNTRACK_TFTP=m
> CONFIG_NF_CT_NETLINK=m
> CONFIG_NETFILTER_XTABLES=m
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
> # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
> CONFIG_NETFILTER_XT_TARGET_RATEEST=m
> # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
> CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> CONFIG_NETFILTER_XT_MATCH_DCCP=m
> CONFIG_NETFILTER_XT_MATCH_DSCP=m
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> CONFIG_NETFILTER_XT_MATCH_HELPER=m
> CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
> CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> CONFIG_NETFILTER_XT_MATCH_MAC=m
> CONFIG_NETFILTER_XT_MATCH_MARK=m
> CONFIG_NETFILTER_XT_MATCH_OWNER=m
> CONFIG_NETFILTER_XT_MATCH_POLICY=m
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> CONFIG_NETFILTER_XT_MATCH_RATEEST=m
> CONFIG_NETFILTER_XT_MATCH_REALM=m
> CONFIG_NETFILTER_XT_MATCH_SCTP=m
> CONFIG_NETFILTER_XT_MATCH_STATE=m
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> CONFIG_NETFILTER_XT_MATCH_TIME=m
> CONFIG_NETFILTER_XT_MATCH_U32=m
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_CONNTRACK_IPV4=m
> CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> # CONFIG_IP_NF_QUEUE is not set
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_RECENT=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_AH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_ADDRTYPE=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_NF_NAT=m
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_TARGET_NETMAP=m
> CONFIG_NF_NAT_SNMP_BASIC=m
> CONFIG_NF_NAT_PROTO_DCCP=m
> CONFIG_NF_NAT_PROTO_GRE=m
> CONFIG_NF_NAT_PROTO_UDPLITE=m
> CONFIG_NF_NAT_PROTO_SCTP=m
> CONFIG_NF_NAT_FTP=m
> CONFIG_NF_NAT_IRC=m
> CONFIG_NF_NAT_TFTP=m
> CONFIG_NF_NAT_AMANDA=m
> CONFIG_NF_NAT_PPTP=m
> CONFIG_NF_NAT_H323=m
> CONFIG_NF_NAT_SIP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_TTL=m
> CONFIG_IP_NF_TARGET_CLUSTERIP=m
> CONFIG_IP_NF_RAW=m
> # CONFIG_IP_NF_ARPTABLES is not set
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_NF_CONNTRACK_IPV6=m
> # CONFIG_IP6_NF_QUEUE is not set
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_RT=m
> CONFIG_IP6_NF_MATCH_OPTS=m
> CONFIG_IP6_NF_MATCH_FRAG=m
> CONFIG_IP6_NF_MATCH_HL=m
> CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> CONFIG_IP6_NF_MATCH_AH=m
> CONFIG_IP6_NF_MATCH_MH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_TARGET_REJECT=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_HL=m
> CONFIG_IP6_NF_RAW=m
>
> #
> # Bridge: Netfilter Configuration
> #
> # CONFIG_BRIDGE_NF_EBTABLES is not set
> CONFIG_IP_DCCP=m
> CONFIG_INET_DCCP_DIAG=m
> CONFIG_IP_DCCP_ACKVEC=y
>
> #
> # DCCP CCIDs Configuration (EXPERIMENTAL)
> #
> CONFIG_IP_DCCP_CCID2=m
> # CONFIG_IP_DCCP_CCID2_DEBUG is not set
> CONFIG_IP_DCCP_CCID3=m
> # CONFIG_IP_DCCP_CCID3_DEBUG is not set
> CONFIG_IP_DCCP_CCID3_RTO=100
> CONFIG_IP_DCCP_TFRC_LIB=m
>
> #
> # DCCP Kernel Hacking
> #
> # CONFIG_IP_DCCP_DEBUG is not set
> # CONFIG_NET_DCCPPROBE is not set
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_TIPC is not set
> CONFIG_ATM=m
> # CONFIG_ATM_CLIP is not set
> # CONFIG_ATM_LANE is not set
> # CONFIG_ATM_BR2684 is not set
> CONFIG_BRIDGE=m
> CONFIG_VLAN_8021Q=m
> # CONFIG_DECNET is not set
> CONFIG_LLC=m
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_ATM=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_NETEM=m
> CONFIG_NET_SCH_INGRESS=m
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_FLOW=m
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=m
> CONFIG_NET_ACT_GACT=m
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=m
> CONFIG_NET_ACT_IPT=m
> CONFIG_NET_ACT_NAT=m
> CONFIG_NET_ACT_PEDIT=m
> CONFIG_NET_ACT_SIMP=m
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_SCH_FIFO=y
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
>
> #
> # Wireless
> #
> # CONFIG_CFG80211 is not set
> # CONFIG_WIRELESS_EXT is not set
> # CONFIG_MAC80211 is not set
> # CONFIG_IEEE80211 is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=m
> # CONFIG_MTD is not set
> # CONFIG_PARPORT is not set
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> CONFIG_BLK_DEV_FD=m
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_XIP is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_VIRTIO_BLK is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_MSI_LAPTOP is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_EEEPC_LAPTOP is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> CONFIG_HAVE_IDE=y
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> CONFIG_BLK_DEV_IDEACPI=y
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_PROC_FS=y
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_IDE_GENERIC is not set
> # CONFIG_BLK_DEV_PLATFORM is not set
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEDMA_SFF=y
>
> #
> # PCI IDE chipsets support
> #
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_IDEPCI_PCIBUS_ORDER is not set
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=y
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_IT8213 is not set
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_BLK_DEV_TC86C001 is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_BLK_DEV_HD_ONLY is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_TGT is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_SCSI_PROC_FS is not set
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
> CONFIG_SCSI_WAIT_SCAN=m
>
> #
> # SCSI Transports
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> CONFIG_SCSI_SAS_ATTRS=y
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> CONFIG_SCSI_LOWLEVEL=y
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_AIC94XX is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> CONFIG_MEGARAID_SAS=y
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_MVSAS is not set
> # CONFIG_SCSI_STEX is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_QLA_ISCSI is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
> # CONFIG_SCSI_SRP is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=y
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=y
> # CONFIG_SATA_SVW is not set
> # CONFIG_ATA_PIIX is not set
> # CONFIG_SATA_MV is not set
> CONFIG_SATA_NV=y
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SX4 is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_MARVELL is not set
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> # CONFIG_PATA_SCH is not set
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> # CONFIG_MD_RAID10 is not set
> CONFIG_MD_RAID456=y
> CONFIG_MD_RAID5_RESHAPE=y
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_MD_FAULTY is not set
> CONFIG_BLK_DEV_DM=y
> # CONFIG_DM_DEBUG is not set
> CONFIG_DM_CRYPT=y
> CONFIG_DM_SNAPSHOT=y
> CONFIG_DM_MIRROR=y
> CONFIG_DM_ZERO=y
> # CONFIG_DM_MULTIPATH is not set
> # CONFIG_DM_DELAY is not set
> # CONFIG_DM_UEVENT is not set
> CONFIG_FUSION=y
> # CONFIG_FUSION_SPI is not set
> # CONFIG_FUSION_FC is not set
> CONFIG_FUSION_SAS=y
> CONFIG_FUSION_MAX_SGE=128
> CONFIG_FUSION_CTL=y
> # CONFIG_FUSION_LOGGING is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # Enable only one of the two stacks, unless you know what you are doing
> #
> # CONFIG_FIREWIRE is not set
> CONFIG_IEEE1394=y
> CONFIG_IEEE1394_OHCI1394=y
> # CONFIG_IEEE1394_PCILYNX is not set
> CONFIG_IEEE1394_SBP2=y
> # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
> CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
> CONFIG_IEEE1394_ETH1394=y
> CONFIG_IEEE1394_RAWIO=y
> CONFIG_IEEE1394_VIDEO1394=y
> # CONFIG_IEEE1394_DV1394 is not set
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_I2O is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_NETDEVICES_MULTIQUEUE=y
> CONFIG_IFB=m
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> CONFIG_MACVLAN=m
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_ARCNET is not set
> CONFIG_PHYLIB=m
>
> #
> # MII PHY device drivers
> #
> CONFIG_MARVELL_PHY=m
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_QSEMI_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_CICADA_PHY is not set
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_SMSC_PHY is not set
> # CONFIG_BROADCOM_PHY is not set
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> CONFIG_FORCEDETH=y
> CONFIG_FORCEDETH_NAPI=y
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_R6040 is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_SC92031 is not set
> CONFIG_NETDEV_1000=y
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> CONFIG_E1000_NAPI=y
> # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_E1000E is not set
> # CONFIG_E1000E_ENABLED is not set
> # CONFIG_IP1000 is not set
> # CONFIG_IGB is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
> # CONFIG_QLA3XXX is not set
> # CONFIG_ATL1 is not set
> # CONFIG_NETDEV_10000 is not set
> # CONFIG_TR is not set
>
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> # CONFIG_WLAN_80211 is not set
> # CONFIG_IWLWIFI_LEDS is not set
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> # CONFIG_WAN is not set
> CONFIG_ATM_DRIVERS=y
> # CONFIG_ATM_DUMMY is not set
> # CONFIG_ATM_TCP is not set
> # CONFIG_ATM_LANAI is not set
> # CONFIG_ATM_ENI is not set
> # CONFIG_ATM_FIRESTREAM is not set
> # CONFIG_ATM_ZATM is not set
> # CONFIG_ATM_IDT77252 is not set
> # CONFIG_ATM_AMBASSADOR is not set
> # CONFIG_ATM_HORIZON is not set
> # CONFIG_ATM_FORE200E_MAYBE is not set
> # CONFIG_ATM_HE is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPP_MPPE=m
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> CONFIG_PPPOL2TP=m
> # CONFIG_SLIP is not set
> CONFIG_SLHC=m
> # CONFIG_NET_FC is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_VIRTIO_NET is not set
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> # CONFIG_INPUT_POLLDEV is not set
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> # CONFIG_DEVKMEM is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> # CONFIG_NOZOMI is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> # CONFIG_IPMI_HANDLER is not set
> # CONFIG_HW_RANDOM is not set
> CONFIG_NVRAM=m
> CONFIG_RTC=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> CONFIG_HPET_RTC_IRQ=y
> CONFIG_HPET_MMAP=y
> CONFIG_HANGCHECK_TIMER=y
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_ALGOBIT=m
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_I810 is not set
> # CONFIG_I2C_PIIX4 is not set
> CONFIG_I2C_NFORCE2=y
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_I2C_SIMTEC is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_I2C_TINY_USB is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> # CONFIG_I2C_VOODOO3 is not set
> # CONFIG_I2C_PCA_PLATFORM is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_PCF8575 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> # CONFIG_SPI is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=y
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7473 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_CORETEMP is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> CONFIG_SENSORS_LM85=y
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> CONFIG_SENSORS_DME1737=m
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_THERMAL=y
> CONFIG_THERMAL_HWMON=y
> # CONFIG_WATCHDOG is not set
>
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB_POSSIBLE=y
> # CONFIG_SSB is not set
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
>
> #
> # Multimedia devices
> #
>
> #
> # Multimedia core support
> #
> CONFIG_VIDEO_DEV=y
> CONFIG_VIDEO_V4L2_COMMON=y
> # CONFIG_VIDEO_ALLOW_V4L1 is not set
> CONFIG_VIDEO_V4L1_COMPAT=y
> CONFIG_DVB_CORE=y
> CONFIG_VIDEO_MEDIA=y
>
> #
> # Multimedia drivers
> #
> # CONFIG_MEDIA_ATTACH is not set
> CONFIG_MEDIA_TUNER=y
> CONFIG_MEDIA_TUNER_CUSTOMIZE=y
> # CONFIG_MEDIA_TUNER_SIMPLE is not set
> # CONFIG_MEDIA_TUNER_TDA8290 is not set
> # CONFIG_MEDIA_TUNER_TDA827X is not set
> # CONFIG_MEDIA_TUNER_TDA18271 is not set
> CONFIG_MEDIA_TUNER_TDA9887=y
> # CONFIG_MEDIA_TUNER_TEA5761 is not set
> # CONFIG_MEDIA_TUNER_TEA5767 is not set
> CONFIG_MEDIA_TUNER_MT20XX=y
> # CONFIG_MEDIA_TUNER_MT2060 is not set
> # CONFIG_MEDIA_TUNER_MT2266 is not set
> # CONFIG_MEDIA_TUNER_MT2131 is not set
> # CONFIG_MEDIA_TUNER_QT1010 is not set
> # CONFIG_MEDIA_TUNER_XC2028 is not set
> # CONFIG_MEDIA_TUNER_XC5000 is not set
> # CONFIG_MEDIA_TUNER_MXL5005S is not set
> CONFIG_VIDEO_V4L2=y
> CONFIG_VIDEOBUF_GEN=y
> CONFIG_VIDEOBUF_DMA_SG=y
> CONFIG_VIDEOBUF_DVB=y
> CONFIG_VIDEO_IR_I2C=y
> CONFIG_VIDEO_IR=y
> CONFIG_VIDEO_TVEEPROM=y
> CONFIG_VIDEO_TUNER=y
> CONFIG_VIDEO_CAPTURE_DRIVERS=y
> # CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
>
> #
> # Encoders/decoders and other helper chips
> #
>
> #
> # Audio decoders
> #
> # CONFIG_VIDEO_TVAUDIO is not set
> # CONFIG_VIDEO_TDA7432 is not set
> # CONFIG_VIDEO_TDA9840 is not set
> # CONFIG_VIDEO_TDA9875 is not set
> # CONFIG_VIDEO_TEA6415C is not set
> # CONFIG_VIDEO_TEA6420 is not set
> # CONFIG_VIDEO_MSP3400 is not set
> # CONFIG_VIDEO_CS5345 is not set
> # CONFIG_VIDEO_CS53L32A is not set
> # CONFIG_VIDEO_M52790 is not set
> # CONFIG_VIDEO_TLV320AIC23B is not set
> # CONFIG_VIDEO_WM8775 is not set
> # CONFIG_VIDEO_WM8739 is not set
> # CONFIG_VIDEO_VP27SMPX is not set
>
> #
> # Video decoders
> #
> # CONFIG_VIDEO_OV7670 is not set
> # CONFIG_VIDEO_TCM825X is not set
> # CONFIG_VIDEO_SAA711X is not set
> # CONFIG_VIDEO_SAA717X is not set
> # CONFIG_VIDEO_TVP5150 is not set
>
> #
> # Video and audio decoders
> #
> # CONFIG_VIDEO_CX25840 is not set
>
> #
> # MPEG video encoders
> #
> # CONFIG_VIDEO_CX2341X is not set
>
> #
> # Video encoders
> #
> # CONFIG_VIDEO_SAA7127 is not set
>
> #
> # Video improvement chips
> #
> # CONFIG_VIDEO_UPD64031A is not set
> # CONFIG_VIDEO_UPD64083 is not set
> # CONFIG_VIDEO_VIVI is not set
> # CONFIG_VIDEO_BT848 is not set
> # CONFIG_VIDEO_SAA5246A is not set
> # CONFIG_VIDEO_SAA5249 is not set
> CONFIG_VIDEO_SAA7134=y
> CONFIG_VIDEO_SAA7134_ALSA=y
> CONFIG_VIDEO_SAA7134_DVB=y
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
> # CONFIG_VIDEO_CX88 is not set
> # CONFIG_VIDEO_CX23885 is not set
> # CONFIG_VIDEO_AU0828 is not set
> # CONFIG_VIDEO_CX18 is not set
> # CONFIG_VIDEO_CAFE_CCIC is not set
> # CONFIG_V4L_USB_DRIVERS is not set
> # CONFIG_SOC_CAMERA is not set
> # CONFIG_RADIO_ADAPTERS is not set
> CONFIG_DVB_CAPTURE_DRIVERS=y
>
> #
> # Supported SAA7146 based PCI Adapters
> #
> # CONFIG_TTPCI_EEPROM is not set
> # CONFIG_DVB_AV7110 is not set
> # CONFIG_DVB_BUDGET_CORE is not set
>
> #
> # Supported USB Adapters
> #
> # CONFIG_DVB_USB is not set
> # CONFIG_DVB_TTUSB_BUDGET is not set
> # CONFIG_DVB_TTUSB_DEC is not set
> # CONFIG_DVB_CINERGYT2 is not set
>
> #
> # Supported FlexCopII (B2C2) Adapters
> #
> # CONFIG_DVB_B2C2_FLEXCOP is not set
>
> #
> # Supported BT878 Adapters
> #
>
> #
> # Supported Pluto2 Adapters
> #
> # CONFIG_DVB_PLUTO2 is not set
>
> #
> # Supported DVB Frontends
> #
>
> #
> # Customise DVB Frontends
> #
> CONFIG_DVB_FE_CUSTOMISE=y
>
> #
> # DVB-S (satellite) frontends
> #
> # CONFIG_DVB_CX24110 is not set
> # CONFIG_DVB_CX24123 is not set
> # CONFIG_DVB_MT312 is not set
> # CONFIG_DVB_S5H1420 is not set
> # CONFIG_DVB_STV0299 is not set
> # CONFIG_DVB_TDA8083 is not set
> # CONFIG_DVB_TDA10086 is not set
> # CONFIG_DVB_VES1X93 is not set
> # CONFIG_DVB_TUNER_ITD1000 is not set
> # CONFIG_DVB_TDA826X is not set
> # CONFIG_DVB_TUA6100 is not set
>
> #
> # DVB-T (terrestrial) frontends
> #
> # CONFIG_DVB_SP8870 is not set
> # CONFIG_DVB_SP887X is not set
> # CONFIG_DVB_CX22700 is not set
> # CONFIG_DVB_CX22702 is not set
> # CONFIG_DVB_L64781 is not set
> # CONFIG_DVB_TDA1004X is not set
> # CONFIG_DVB_NXT6000 is not set
> CONFIG_DVB_MT352=y
> # CONFIG_DVB_ZL10353 is not set
> # CONFIG_DVB_DIB3000MB is not set
> # CONFIG_DVB_DIB3000MC is not set
> # CONFIG_DVB_DIB7000M is not set
> # CONFIG_DVB_DIB7000P is not set
> # CONFIG_DVB_TDA10048 is not set
>
> #
> # DVB-C (cable) frontends
> #
> # CONFIG_DVB_VES1820 is not set
> # CONFIG_DVB_TDA10021 is not set
> # CONFIG_DVB_TDA10023 is not set
> # CONFIG_DVB_STV0297 is not set
>
> #
> # ATSC (North American/Korean Terrestrial/Cable DTV) frontends
> #
> # CONFIG_DVB_NXT200X is not set
> # CONFIG_DVB_OR51211 is not set
> # CONFIG_DVB_OR51132 is not set
> # CONFIG_DVB_BCM3510 is not set
> # CONFIG_DVB_LGDT330X is not set
> # CONFIG_DVB_S5H1409 is not set
> # CONFIG_DVB_AU8522 is not set
> # CONFIG_DVB_S5H1411 is not set
>
> #
> # Digital terrestrial only tuners/PLL
> #
> # CONFIG_DVB_PLL is not set
> # CONFIG_DVB_TUNER_DIB0070 is not set
>
> #
> # SEC control devices for DVB-S
> #
> # CONFIG_DVB_LNBP21 is not set
> # CONFIG_DVB_ISL6405 is not set
> # CONFIG_DVB_ISL6421 is not set
> # CONFIG_DAB is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_VIA is not set
> CONFIG_DRM=m
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> CONFIG_FB=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_FB_DDC=m
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_BACKLIGHT=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_VESA=y
> # CONFIG_FB_EFI is not set
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_LE80578 is not set
> # CONFIG_FB_INTEL is not set
> # CONFIG_FB_MATROX is not set
> CONFIG_FB_RADEON=m
> CONFIG_FB_RADEON_I2C=y
> CONFIG_FB_RADEON_BACKLIGHT=y
> # CONFIG_FB_RADEON_DEBUG is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> # CONFIG_FB_SAVAGE is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_KYRO is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> # CONFIG_LCD_CLASS_DEVICE is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> # CONFIG_BACKLIGHT_CORGI is not set
> # CONFIG_BACKLIGHT_PROGEAR is not set
>
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
> CONFIG_VIDEO_SELECT=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_LOGO is not set
> CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_HWDEP=y
> CONFIG_SND_RAWMIDI=y
> CONFIG_SND_SEQUENCER=y
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=y
> CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> CONFIG_SND_DYNAMIC_MINORS=y
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_MPU401_UART=y
> CONFIG_SND_OPL3_LIB=y
> CONFIG_SND_DRIVERS=y
> # CONFIG_SND_PCSP is not set
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> CONFIG_SND_PCI=y
> # CONFIG_SND_AD1889 is not set
> # CONFIG_SND_ALS300 is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_ATIIXP is not set
> # CONFIG_SND_ATIIXP_MODEM is not set
> # CONFIG_SND_AU8810 is not set
> # CONFIG_SND_AU8820 is not set
> # CONFIG_SND_AU8830 is not set
> # CONFIG_SND_AW2 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_BT87X is not set
> # CONFIG_SND_CA0106 is not set
> CONFIG_SND_CMIPCI=y
> # CONFIG_SND_OXYGEN is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS5530 is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_EMU10K1X is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_HDA_INTEL is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_HDSPM is not set
> # CONFIG_SND_HIFIER is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_INTEL8X0M is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_MIXART is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VIA82XX_MODEM is not set
> # CONFIG_SND_VIRTUOSO is not set
> # CONFIG_SND_VX222 is not set
> # CONFIG_SND_YMFPCI is not set
> CONFIG_SND_USB=y
> CONFIG_SND_USB_AUDIO=y
> # CONFIG_SND_USB_USX2Y is not set
> # CONFIG_SND_USB_CAIAQ is not set
> # CONFIG_SND_SOC is not set
> # CONFIG_SOUND_PRIME is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> # CONFIG_HID_DEBUG is not set
> CONFIG_HIDRAW=y
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT_POWERBOOK=y
> # CONFIG_HID_FF is not set
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> CONFIG_USB_DEBUG=y
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_DEVICE_CLASS is not set
> CONFIG_USB_DYNAMIC_MINORS=y
> CONFIG_USB_SUSPEND=y
> # CONFIG_USB_OTG is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> # CONFIG_USB_UHCI_HCD is not set
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=y
> # CONFIG_USB_WDM is not set
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
>
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> CONFIG_USB_LIBUSUAL=y
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> CONFIG_USB_MON=y
>
> #
> # USB port drivers
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_BERRY_CHARGE is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGET is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> CONFIG_USB_ATM=m
> # CONFIG_USB_SPEEDTOUCH is not set
> CONFIG_USB_CXACRU=m
> # CONFIG_USB_UEAGLEATM is not set
> # CONFIG_USB_XUSBATM is not set
> # CONFIG_USB_GADGET is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> # CONFIG_NEW_LEDS is not set
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=y
> # CONFIG_EDAC_E752X is not set
> # CONFIG_EDAC_I82975X is not set
> # CONFIG_EDAC_I3000 is not set
> # CONFIG_EDAC_I5000 is not set
> # CONFIG_RTC_CLASS is not set
> # CONFIG_DMADEVICES is not set
> # CONFIG_UIO is not set
>
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> CONFIG_FIRMWARE_MEMMAP=y
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> CONFIG_DMIID=y
> # CONFIG_ISCSI_IBFT_FIND is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> # CONFIG_EXT2_FS_SECURITY is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> # CONFIG_EXT4DEV_FS is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> CONFIG_FUSE_FS=m
> CONFIG_GENERIC_ACL=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=850
> CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
> CONFIG_NTFS_FS=y
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=m
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=y
> CONFIG_NFSD=m
> CONFIG_NFSD_V2_ACL=y
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V3_ACL=y
> CONFIG_NFSD_V4=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_NFS_ACL_SUPPORT=m
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=m
> CONFIG_SUNRPC_GSS=m
> # CONFIG_SUNRPC_BIND34 is not set
> CONFIG_RPCSEC_GSS_KRB5=m
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> # CONFIG_CIFS_WEAK_PW_HASH is not set
> CONFIG_CIFS_XATTR=y
> CONFIG_CIFS_POSIX=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_BSD_DISKLABEL is not set
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> # CONFIG_LDM_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_KARMA_PARTITION is not set
> # CONFIG_EFI_PARTITION is not set
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=m
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> CONFIG_DLM=m
> # CONFIG_DLM_DEBUG is not set
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_ENABLE_WARN_DEPRECATED=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_UNUSED_SYMBOLS=y
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_SCHED_DEBUG is not set
> # CONFIG_SCHEDSTATS is not set
> CONFIG_TIMER_STATS=y
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_PREEMPT is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_SG is not set
> CONFIG_FRAME_POINTER=y
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_LKDTM is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> CONFIG_NONPROMISC_DEVMEM=y
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> CONFIG_DIRECT_GBPAGES=y
> # CONFIG_DEBUG_RODATA_TEST is not set
> # CONFIG_DEBUG_NX_TEST is not set
> # CONFIG_IOMMU_DEBUG is not set
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> # CONFIG_IO_DELAY_0X80 is not set
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> CONFIG_IO_DELAY_NONE=y
> CONFIG_DEFAULT_IO_DELAY_TYPE=3
> # CONFIG_DEBUG_BOOT_PARAMS is not set
> # CONFIG_CPA_DEBUG is not set
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> # CONFIG_SECURITY_FILE_CAPABILITIES is not set
> CONFIG_XOR_BLOCKS=y
> CONFIG_ASYNC_CORE=y
> CONFIG_ASYNC_MEMCPY=y
> CONFIG_ASYNC_XOR=y
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_GF128MUL=m
> # CONFIG_CRYPTO_NULL is not set
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> # CONFIG_CRYPTO_SEQIV is not set
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> # CONFIG_CRYPTO_CTR is not set
> # CONFIG_CRYPTO_CTS is not set
> CONFIG_CRYPTO_ECB=m
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_PCBC is not set
> # CONFIG_CRYPTO_XTS is not set
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_XCBC is not set
>
> #
> # Digest
> #
> # CONFIG_CRYPTO_CRC32C is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> CONFIG_CRYPTO_RMD128=y
> CONFIG_CRYPTO_RMD160=y
> CONFIG_CRYPTO_RMD256=y
> CONFIG_CRYPTO_RMD320=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> # CONFIG_CRYPTO_TGR192 is not set
> # CONFIG_CRYPTO_WP512 is not set
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_X86_64=y
> # CONFIG_CRYPTO_ANUBIS is not set
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_BLOWFISH=y
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST6 is not set
> CONFIG_CRYPTO_DES=m
> # CONFIG_CRYPTO_FCRYPT is not set
> # CONFIG_CRYPTO_KHAZAD is not set
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> # CONFIG_CRYPTO_SEED is not set
> # CONFIG_CRYPTO_SERPENT is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> CONFIG_CRYPTO_TWOFISH_COMMON=y
> CONFIG_CRYPTO_TWOFISH_X86_64=y
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=m
> CONFIG_CRYPTO_LZO=y
>
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_PRNG=y
> # CONFIG_CRYPTO_HW is not set
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_KVM=m
> # CONFIG_KVM_INTEL is not set
> CONFIG_KVM_AMD=m
> CONFIG_VIRTIO=m
> CONFIG_VIRTIO_RING=m
> # CONFIG_VIRTIO_PCI is not set
> CONFIG_VIRTIO_BALLOON=m
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> CONFIG_CRC_CCITT=m
> # CONFIG_CRC16 is not set
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=m
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y

--
/****************************************************
* Neil Horman <[email protected]>
* Software Engineer, Red Hat
****************************************************/

2008-07-15 11:33:42

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

* Neil Horman <[email protected]> wrote:

> On Tue, Jul 15, 2008 at 12:25:37AM +0100, Simon Arlott wrote:
> > http://img182.imageshack.us/img182/7205/1005489hh6.jpg
> >
> > .config attached
> >
> > --
> > Simon Arlott
>
> Looks like you don't have rfc3686(ctr(aes)) compiled in. Add
> CONFIG_CRYPTO_CTR to your config, IIRC. I'll add a depends directive
> to Kconfig for that in my next update.

i have just triggered this crash too. Please, when you know about bootup
crashes in your code send a patch to the lkml thread so that people can
apply it and have a working system.

Note that the new crypto/prng.c driver has very bad quality:

total: 45 errors, 21 warnings, 1 checks, 410 lines checked

It has tons of completely unacceptable code mistakes in it.

And the commit log says:

| commit b8454eebe380677789735fd6bad368af2e6b2d1e
| Author: Neil Horman <[email protected]>
| AuthorDate: Mon Jul 7 22:41:31 2008 +0800
| CommitDate: Thu Jul 10 20:35:18 2008 +0800
|
| crypto: prng - Deterministic CPRNG

i.e. this patch went in just 7 days from development to upstream, with
insufficient review, with no linux-next presence at all (as of
linux-next when v2.6.26 was released) and insufficient testing.

That's not how it's supposed to be.

Ingo

2008-07-15 11:50:11

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

* Ingo Molnar <[email protected]> wrote:

> * Neil Horman <[email protected]> wrote:
>
> > On Tue, Jul 15, 2008 at 12:25:37AM +0100, Simon Arlott wrote:
> > > http://img182.imageshack.us/img182/7205/1005489hh6.jpg
> > >
> > > .config attached
> > >
> > > --
> > > Simon Arlott
> >
> > Looks like you don't have rfc3686(ctr(aes)) compiled in. Add
> > CONFIG_CRYPTO_CTR to your config, IIRC. I'll add a depends directive
> > to Kconfig for that in my next update.
>
> i have just triggered this crash too. Please, when you know about
> bootup crashes in your code send a patch to the lkml thread so that
> people can apply it and have a working system.

btw., here's another crypto bug, in the same driver, in prng_mod_init():

[ 0.552014] calling crypto_authenc_module_init+0x0/0x10
[ 0.552014] initcall crypto_authenc_module_init+0x0/0x10 returned 0 after 0 msecs
[ 0.552014] calling prng_mod_init+0x0/0x60
[ 0.552014] BUG: scheduling while atomic: swapper/1/0x00000002
[ 0.552014] Pid: 1, comm: swapper Not tainted 2.6.26-tip #2739
[ 0.552014] [<b012dd4c>] __schedule_bug+0x5c/0x70
[ 0.552014] [<b07a6d0c>] schedule+0x52c/0x900
[ 0.552014] [<b0126368>] ? __enqueue_entity+0xb8/0xe0
[ 0.552014] [<b0124990>] ? __resched_task+0x20/0x70
[ 0.552014] [<b07a7315>] schedule_timeout+0x75/0xc0
[ 0.552014] [<b07a8bb1>] ? _spin_unlock_irqrestore+0x31/0x40
[ 0.552014] [<b012a5ef>] ? try_to_wake_up+0xdf/0x280
[ 0.552014] [<b07a669f>] wait_for_common+0x6f/0x110
[ 0.552014] [<b012a790>] ? default_wake_function+0x0/0x10
[ 0.552014] [<b07a67d2>] wait_for_completion+0x12/0x20
[ 0.552014] [<b0144070>] kthread_create+0x70/0xa0
[ 0.552014] [<b02ff760>] ? cryptomgr_probe+0x0/0xa0
[ 0.552014] [<b02ff744>] cryptomgr_notify+0x244/0x260
[ 0.552014] [<b02ff760>] ? cryptomgr_probe+0x0/0xa0
[ 0.552014] [<b014843d>] notifier_call_chain+0x2d/0x60
[ 0.552014] [<b0148674>] __blocking_notifier_call_chain+0x44/0x60
[ 0.552014] [<b01486aa>] blocking_notifier_call_chain+0x1a/0x20
[ 0.552014] [<b02fa61e>] crypto_alg_mod_lookup+0x2e/0x80
[ 0.552014] [<b02fa6b2>] crypto_alloc_base+0x22/0x80
[ 0.552014] [<b03106c8>] reset_prng_context+0xc8/0x1f0
[ 0.552014] [<b0310847>] alloc_prng_context+0x37/0x70
[ 0.552014] [<b0a6fabe>] prng_mod_init+0xe/0x60
[ 0.552014] [<b01478f9>] ? ktime_get+0x19/0x40
[ 0.552014] [<b0a5972e>] kernel_init+0x1be/0x2d0
[ 0.552014] [<b0a6fab0>] ? prng_mod_init+0x0/0x60
[ 0.552014] [<b012da99>] ? schedule_tail+0x19/0x50
[ 0.552014] [<b0103d66>] ? ret_from_fork+0x6/0x20
[ 0.552014] [<b0a59570>] ? kernel_init+0x0/0x2d0
[ 0.552014] [<b0a59570>] ? kernel_init+0x0/0x2d0
[ 0.552014] [<b0105187>] kernel_thread_helper+0x7/0x10
[ 0.552014] =======================
[ 0.552014] BUG: scheduling while atomic: swapper/1/0x00000002
[ 0.552014] Pid: 1, comm: swapper Not tainted 2.6.26-tip #2739
[ 0.552014] [<b012dd4c>] __schedule_bug+0x5c/0x70
[ 0.552014] [<b07a6d0c>] schedule+0x52c/0x900
[ 0.552014] [<b01268e7>] ? enqueue_task_fair+0x47/0x50
[ 0.552014] [<b01240c7>] ? enqueue_task+0x57/0x70
[ 0.552014] [<b013a6d5>] ? lock_timer_base+0x25/0x50
[ 0.552014] [<b013a811>] ? __mod_timer+0x91/0xb0
[ 0.552014] [<b07a72e8>] schedule_timeout+0x48/0xc0
[ 0.552014] [<b013a540>] ? process_timeout+0x0/0x10
[ 0.552014] [<b07a669f>] wait_for_common+0x6f/0x110
[ 0.552014] [<b012a790>] ? default_wake_function+0x0/0x10
[ 0.552014] [<b07a677d>] wait_for_completion_interruptible_timeout+0xd/0x10
[ 0.552014] [<b02fa2df>] crypto_larval_wait+0x1f/0x60
[ 0.552014] [<b02fa667>] crypto_alg_mod_lookup+0x77/0x80
[ 0.552014] [<b02fa6b2>] crypto_alloc_base+0x22/0x80
[ 0.552014] [<b03106c8>] reset_prng_context+0xc8/0x1f0
[ 0.552014] [<b0310847>] alloc_prng_context+0x37/0x70
[ 0.552014] [<b0a6fabe>] prng_mod_init+0xe/0x60
[ 0.552014] [<b01478f9>] ? ktime_get+0x19/0x40
[ 0.556035] [<b0a5972e>] kernel_init+0x1be/0x2d0
[ 0.556035] [<b0a6fab0>] ? prng_mod_init+0x0/0x60
[ 0.556035] [<b012da99>] ? schedule_tail+0x19/0x50
[ 0.556035] [<b0103d66>] ? ret_from_fork+0x6/0x20
[ 0.556035] [<b0a59570>] ? kernel_init+0x0/0x2d0
[ 0.556035] [<b0a59570>] ? kernel_init+0x0/0x2d0
[ 0.556035] [<b0105187>] kernel_thread_helper+0x7/0x10
[ 0.556035] =======================
[ 0.556035] initcall prng_mod_init+0x0/0x60 returned 0 after 2 msecs
[ 0.556035] calling noop_init+0x0/0x20
[ 0.556035] io scheduler noop registered

it calls a blocking notifier from atomic context.

Ingo

2008-07-15 11:52:32

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

* Ingo Molnar <[email protected]> wrote:

> i have just triggered this crash too. Please, when you know about
> bootup crashes in your code send a patch to the lkml thread so that
> people can apply it and have a working system.

here's the band-aid patch i'm using.

Ingo

-------------->
commit 3fdcd29e5c272c66424ac7616fcd4a9a725bc206
Author: Ingo Molnar <[email protected]>
Date: Tue Jul 15 13:34:15 2008 +0200

crypto: exclude broken CRYPTO_PRNG code

Signed-off-by: Ingo Molnar <[email protected]>
---
crypto/Kconfig | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/crypto/Kconfig b/crypto/Kconfig
index ea50357..2cf66ca 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -670,6 +670,8 @@ comment "Random Number Generation"

config CRYPTO_PRNG
tristate "Pseudo Random Number Generation for Cryptographic modules"
+ # causes bootup crashes with config-Tue_Jul_15_10_35_22_CEST_2008.bad
+ depends on 0
help
This option enables the generic pseudo random number generator
for cryptographic modules. Uses the Algorithm specified in

2008-07-15 14:22:50

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 01:51:17PM +0200, Ingo Molnar wrote:
>
> * Ingo Molnar <[email protected]> wrote:
>
> > i have just triggered this crash too. Please, when you know about
> > bootup crashes in your code send a patch to the lkml thread so that
> > people can apply it and have a working system.
>
> here's the band-aid patch i'm using.
>
> Ingo
>
> -------------->
> commit 3fdcd29e5c272c66424ac7616fcd4a9a725bc206
> Author: Ingo Molnar <[email protected]>
> Date: Tue Jul 15 13:34:15 2008 +0200
>
> crypto: exclude broken CRYPTO_PRNG code
>
> Signed-off-by: Ingo Molnar <[email protected]>
> ---
> crypto/Kconfig | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/crypto/Kconfig b/crypto/Kconfig
> index ea50357..2cf66ca 100644
> --- a/crypto/Kconfig
> +++ b/crypto/Kconfig
> @@ -670,6 +670,8 @@ comment "Random Number Generation"
>
> config CRYPTO_PRNG
> tristate "Pseudo Random Number Generation for Cryptographic modules"
> + # causes bootup crashes with config-Tue_Jul_15_10_35_22_CEST_2008.bad
> + depends on 0
> help
> This option enables the generic pseudo random number generator
> for cryptographic modules. Uses the Algorithm specified in

Who's using this at the moment Ingo? its part of a larger effort for pseudo
random initial vectors for ipsec. Nothing should depend on or load this module
yet, let alone alloc a context.

Not that that forgives the oops (which incidentally doesn't occur on my systems,
since I build with CRYPTO_CTR enabled).

The patch to fix this is trivial, I'll be posting it later today, after I test
it.

Neil

--
/****************************************************
* Neil Horman <[email protected]>
* Software Engineer, Red Hat
****************************************************/

2008-07-15 20:44:42

by David Miller

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

From: Ingo Molnar <[email protected]>
Date: Tue, 15 Jul 2008 13:33:04 +0200

> i have just triggered this crash too. Please, when you know about bootup
> crashes in your code send a patch to the lkml thread so that people can
> apply it and have a working system.
>
> Note that the new crypto/prng.c driver has very bad quality:
>
> total: 45 errors, 21 warnings, 1 checks, 410 lines checked
>
> It has tons of completely unacceptable code mistakes in it.

I think we should merge new drivers as aggressively as possible.

2008-07-15 21:52:32

by Alexey Dobriyan

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 01:44:07PM -0700, David Miller wrote:
> From: Ingo Molnar <[email protected]>
>
> > i have just triggered this crash too. Please, when you know about bootup
> > crashes in your code send a patch to the lkml thread so that people can
> > apply it and have a working system.
> >
> > Note that the new crypto/prng.c driver has very bad quality:
> >
> > total: 45 errors, 21 warnings, 1 checks, 410 lines checked
> >
> > It has tons of completely unacceptable code mistakes in it.
>
> I think we should merge new drivers as aggressively as possible.

Well, I don't have strong opinion about this exact statement, but

Ingo, COULD YOU PLEASE PERSONALLY FUCKING STOP THIS
CHECKPATCH.PL-AS-INDICATOR HORSESHIT !

Every damn single warning in this case is about whitespace or 80 column limit.

Every damn single one!

The hacker of your calibre should know the difference between whitespace-bad code
and bug-ridden-bad code.

What are those unacceptable mistakes?

Don't read the code again, what are those mistakes?

I _very_ briefly looked at prng.c and place I find wrong it passing
"int nbytes" to get_prng_bytes(). It should be unsigned at least.

checkpatch.pl says about this? Suuuure, it does...

2008-07-15 22:12:53

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Wed, 16 Jul 2008 01:49:30 +0400
Alexey Dobriyan <[email protected]> wrote:

> On Tue, Jul 15, 2008 at 01:44:07PM -0700, David Miller wrote:
> > From: Ingo Molnar <[email protected]>
> >
> > > i have just triggered this crash too. Please, when you know about bootup
> > > crashes in your code send a patch to the lkml thread so that people can
> > > apply it and have a working system.
> > >
> > > Note that the new crypto/prng.c driver has very bad quality:
> > >
> > > total: 45 errors, 21 warnings, 1 checks, 410 lines checked
> > >
> > > It has tons of completely unacceptable code mistakes in it.
> >
> > I think we should merge new drivers as aggressively as possible.
>
> Well, I don't have strong opinion about this exact statement, but
>
> Ingo, COULD YOU PLEASE PERSONALLY FUCKING STOP THIS
> CHECKPATCH.PL-AS-INDICATOR HORSESHIT !

Well I wouldn't put it that way but sure, there is no clear correlation.

Except that such a high density of coding-style errors is an indication
that the code was not closely and critically reviewed by an experienced
kernel developer.

> Every damn single warning in this case is about whitespace or 80 column limit.
>
> Every damn single one!
>
> The hacker of your calibre should know the difference between whitespace-bad code
> and bug-ridden-bad code.
>
>
> What are those unacceptable mistakes?
>
> Don't read the code again, what are those mistakes?
>

Sleeping inside spinlock?

>
> I _very_ briefly looked at prng.c and place I find wrong it passing
> "int nbytes" to get_prng_bytes(). It should be unsigned at least.
>
> checkpatch.pl says about this? Suuuure, it does...

If we're going to merge code which has zillions of trivially-detectable
coding-style errors and which hasn't been runtime tested with very
mainstream kernel debug options enabled and which afacit hasn't been
reviewed then we have no standards at all.

2008-07-15 22:39:37

by Alexey Dobriyan

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
> On Wed, 16 Jul 2008 01:49:30 +0400
> Alexey Dobriyan <[email protected]> wrote:
>
> > On Tue, Jul 15, 2008 at 01:44:07PM -0700, David Miller wrote:
> > > From: Ingo Molnar <[email protected]>
> > >
> > > > i have just triggered this crash too. Please, when you know about bootup
> > > > crashes in your code send a patch to the lkml thread so that people can
> > > > apply it and have a working system.
> > > >
> > > > Note that the new crypto/prng.c driver has very bad quality:
> > > >
> > > > total: 45 errors, 21 warnings, 1 checks, 410 lines checked
> > > >
> > > > It has tons of completely unacceptable code mistakes in it.
> > >
> > > I think we should merge new drivers as aggressively as possible.
> >
> > Well, I don't have strong opinion about this exact statement, but
> >
> > Ingo, COULD YOU PLEASE PERSONALLY FUCKING STOP THIS
> > CHECKPATCH.PL-AS-INDICATOR HORSESHIT !
>
> Well I wouldn't put it that way but sure, there is no clear correlation.
>
> Except that such a high density of coding-style errors is an indication
> that the code was not closely and critically reviewed by an experienced
> kernel developer.

So it's all about entrance? Looking at archives, I wouldn't say so.

> > Every damn single warning in this case is about whitespace or 80 column limit.
> >
> > Every damn single one!
> >
> > The hacker of your calibre should know the difference between whitespace-bad code
> > and bug-ridden-bad code.
> >
> >
> > What are those unacceptable mistakes?
> >
> > Don't read the code again, what are those mistakes?
> >
>
> Sleeping inside spinlock?

Haven't found that place, but checkpatch.pl neither.

> > I _very_ briefly looked at prng.c and place I find wrong it passing
> > "int nbytes" to get_prng_bytes(). It should be unsigned at least.
> >
> > checkpatch.pl says about this? Suuuure, it does...
>
> If we're going to merge code which has zillions of trivially-detectable
> coding-style errors and which hasn't been runtime tested with very
> mainstream kernel debug options enabled and which afacit hasn't been
> reviewed then we have no standards at all.

No excuse for no runtime testing. No arguments about it.

But stamping code bad because it writes all loops as "for (i=0;i<N;i++)"
is unexplainble when person making such statements can rewrite OS
scheduler every weekend.

2008-07-16 00:11:43

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
> On Wed, 16 Jul 2008 01:49:30 +0400
> Alexey Dobriyan <[email protected]> wrote:
>
> > On Tue, Jul 15, 2008 at 01:44:07PM -0700, David Miller wrote:
> > > From: Ingo Molnar <[email protected]>
> > >
> > > > i have just triggered this crash too. Please, when you know about bootup
> > > > crashes in your code send a patch to the lkml thread so that people can
> > > > apply it and have a working system.
> > > >
> > > > Note that the new crypto/prng.c driver has very bad quality:
> > > >
> > > > total: 45 errors, 21 warnings, 1 checks, 410 lines checked
> > > >
> > > > It has tons of completely unacceptable code mistakes in it.
> > >
> > > I think we should merge new drivers as aggressively as possible.
> >
> > Well, I don't have strong opinion about this exact statement, but
> >
> > Ingo, COULD YOU PLEASE PERSONALLY FUCKING STOP THIS
> > CHECKPATCH.PL-AS-INDICATOR HORSESHIT !
>
> Well I wouldn't put it that way but sure, there is no clear correlation.
>
> Except that such a high density of coding-style errors is an indication
> that the code was not closely and critically reviewed by an experienced
> kernel developer.
>
In fairness, I should have run checkpatch.pl on it before I submitted (sorry,
I'm bad about that), and I just missed the bad ifdef check for my startup test,
because I never thought to test with CRYPTO_PRNG built monolithically and no
support for the requisite cipher built in. That was just stupid of of me, and I
apologize.

As its been pointed out though, these are trivial errors, and as such trivial to
fix (FWIW, the 45 errors from checkpatch boiled down to all spacing on about 10
different lines of code). The PRNG works, is usefull, and for anything that
doesn't use it its irrelevant (now that it doesn't oops when built in).

At any rate, its all moot now anyway, I've posted patches that clean up the
whitespace, and fix the oops.

Regards
Neil

--
/****************************************************
* Neil Horman <[email protected]>
* Software Engineer, Red Hat
****************************************************/

2008-07-16 02:09:36

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
>
> > What are those unacceptable mistakes?
> >
> > Don't read the code again, what are those mistakes?
>
> Sleeping inside spinlock?

Actually no, that was purely the result of Ingo's random config
test. It is extremely unlikely that anyone other than Ingo
would have enabled this option without the crypto algorithms
required by it.

Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

2008-07-16 04:07:54

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
>
> Except that such a high density of coding-style errors is an indication
> that the code was not closely and critically reviewed by an experienced
> kernel developer.
>
> > Every damn single warning in this case is about whitespace or 80 column limit.
> >
> > Every damn single one!

Indeed, I apologise for reviewing the code on a monitor that is wider
than yours. If only we could make sure that all Linux developers
used smaller monitors then the code quality would surely improve!

Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

2008-07-16 04:27:22

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Wed, 16 Jul 2008 12:07:01 +0800 Herbert Xu <[email protected]> wrote:

> On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
> >
> > Except that such a high density of coding-style errors is an indication
> > that the code was not closely and critically reviewed by an experienced
> > kernel developer.
> >
> > > Every damn single warning in this case is about whitespace or 80 column limit.
> > >
> > > Every damn single one!
>
> Indeed, I apologise for reviewing the code on a monitor that is wider
> than yours. If only we could make sure that all Linux developers
> used smaller monitors then the code quality would surely improve!
>

Remaining within 80 cols is a big deal indeed for those who choose to
use, or who are forced to use 80-col displays. Try resizing to 70 cols
for a while, see how you get on.

And that's the point: the utility to you (and me) of using >80 cols is
much less than the loss of utility to those who are stuck with 80 cols.
That's why we have a standard.

me, I'd be perfectly happy with upping that standard to 96 cols but I
seem unable to get anyone else to chew on that bait so shrug. But for the
above reasons we _do_ need to have a standard and to stick to it.

(I mean it - try the 70 col experiment!)

2008-07-16 04:33:45

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 09:25:49PM -0700, Andrew Morton wrote:
> On Wed, 16 Jul 2008 12:07:01 +0800 Herbert Xu <[email protected]> wrote:
>
> > On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
> > >
> > > Except that such a high density of coding-style errors is an indication
> > > that the code was not closely and critically reviewed by an experienced
> > > kernel developer.
> > >
> > > > Every damn single warning in this case is about whitespace or 80 column limit.
> > > >
> > > > Every damn single one!
> >
> > Indeed, I apologise for reviewing the code on a monitor that is wider
> > than yours. If only we could make sure that all Linux developers
> > used smaller monitors then the code quality would surely improve!
> >
>
> Remaining within 80 cols is a big deal indeed for those who choose to
> use, or who are forced to use 80-col displays. Try resizing to 70 cols
> for a while, see how you get on.

Sure, I totally understand the 80-column requirement and support
it too.

However, I fail to see how one could draw the conclusion that a
piece of code that breaks the 80-column rule has not been closely
or critically reviewed.

Excuse me for not focusing on white-space or code-width issues
when reviewing code.

Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

2008-07-16 04:53:53

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Wed, 16 Jul 2008 12:33:12 +0800 Herbert Xu <[email protected]> wrote:

> On Tue, Jul 15, 2008 at 09:25:49PM -0700, Andrew Morton wrote:
> > On Wed, 16 Jul 2008 12:07:01 +0800 Herbert Xu <[email protected]> wrote:
> >
> > > On Tue, Jul 15, 2008 at 03:11:10PM -0700, Andrew Morton wrote:
> > > >
> > > > Except that such a high density of coding-style errors is an indication
> > > > that the code was not closely and critically reviewed by an experienced
> > > > kernel developer.
> > > >
> > > > > Every damn single warning in this case is about whitespace or 80 column limit.
> > > > >
> > > > > Every damn single one!
> > >
> > > Indeed, I apologise for reviewing the code on a monitor that is wider
> > > than yours. If only we could make sure that all Linux developers
> > > used smaller monitors then the code quality would surely improve!
> > >
> >
> > Remaining within 80 cols is a big deal indeed for those who choose to
> > use, or who are forced to use 80-col displays. Try resizing to 70 cols
> > for a while, see how you get on.
>
> Sure, I totally understand the 80-column requirement and support
> it too.
>
> However, I fail to see how one could draw the conclusion that a
> piece of code that breaks the 80-column rule has not been closely
> or critically reviewed.

I said "indication". I came to no conclusion.

And I agree with me. I fail to see how someone who is familiar with
kernel code and who is reviewing a submission could let something like

for (i=DEFAULT_BLK_SZ-1;i>0;i--) {

pass without comment.

> Excuse me for not focusing on white-space or code-width issues
> when reviewing code.

Please do so? You hopefully only need to do it once per submitter
and we now have a tool which people can use to aid the process. It's
hardly a large burden.

btw, I've searched my linux-kernel archives and netdev archives and the
linux-crypto web archives and can find no sign of any submission or
discussion of this patch. Am I looking in the wrong places?

2008-07-16 05:35:51

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 09:51:53PM -0700, Andrew Morton wrote:
>
> And I agree with me. I fail to see how someone who is familiar with
> kernel code and who is reviewing a submission could let something like
>
> for (i=DEFAULT_BLK_SZ-1;i>0;i--) {
>
> pass without comment.

Well here is the code in question in its entirety:

/*
* Now update our DT value
*/
for (i=DEFAULT_BLK_SZ-1;i>0;i--) {
ctx->DT[i] = ctx->DT[i-1];
}

I'm afraid that I simply don't see your point.

> btw, I've searched my linux-kernel archives and netdev archives and the
> linux-crypto web archives and can find no sign of any submission or
> discussion of this patch. Am I looking in the wrong places?

http://www.mail-archive.com/[email protected]/msg02082.html

Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

2008-07-16 06:19:36

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Wed, 16 Jul 2008 13:34:59 +0800 Herbert Xu <[email protected]> wrote:

> On Tue, Jul 15, 2008 at 09:51:53PM -0700, Andrew Morton wrote:
> >
> > And I agree with me. I fail to see how someone who is familiar with
> > kernel code and who is reviewing a submission could let something like
> >
> > for (i=DEFAULT_BLK_SZ-1;i>0;i--) {
> >
> > pass without comment.
>
> Well here is the code in question in its entirety:
>
>
> /*
> * Now update our DT value
> */
> for (i=DEFAULT_BLK_SZ-1;i>0;i--) {
> ctx->DT[i] = ctx->DT[i-1];
> }
>
> I'm afraid that I simply don't see your point.

How odd.

> > btw, I've searched my linux-kernel archives and netdev archives and the
> > linux-crypto web archives and can find no sign of any submission or
> > discussion of this patch. Am I looking in the wrong places?
>
> http://www.mail-archive.com/[email protected]/msg02082.html

Ah. Neil went and gave all the patches the same title, so you (I
assume) ad to rewrite those titles so my googling for the title
failed to turn up the patches. There's a lesson.

> commit b8454eebe380677789735fd6bad368af2e6b2d1e
> Author: Neil Horman <[email protected]>
> Date: Mon Jul 7 22:41:31 2008 +0800
>
> crypto: prng - Deterministic CPRNG
>
> This patch adds a cryptographic pseudo-random number generator
> based on CTR(AES-128). It is meant to be used in cases where a
> deterministic CPRNG is required.
>
> One of the first applications will be as an input in the IPsec IV
> generation process.
>
> Signed-off-by: Neil Horman <[email protected]>
> Signed-off-by: Herbert Xu <[email protected]>
>
> diff --git a/crypto/Kconfig b/crypto/Kconfig
> index 795e31c..43b7473 100644
> --- a/crypto/Kconfig
> +++ b/crypto/Kconfig
> @@ -666,6 +666,15 @@ config CRYPTO_LZO
> help
> This is the LZO algorithm.
>
> +comment "Random Number Generation"
> +
> +config CRYPTO_PRNG
> + tristate "Pseudo Random Number Generation for Cryptographic modules"
> + help
> + This option enables the generic pseudo random number generator
> + for cryptographic modules. Uses the Algorithm specified in
> + ANSI X9.31 A.2.4
> +
> source "drivers/crypto/Kconfig"
>
> endif # if CRYPTO
> diff --git a/crypto/Makefile b/crypto/Makefile
> index d4f3ed8..ef61b3b 100644
> --- a/crypto/Makefile
> +++ b/crypto/Makefile
> @@ -69,7 +69,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o
> obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
> obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o
> obj-$(CONFIG_CRYPTO_LZO) += lzo.o
> -
> +obj-$(CONFIG_CRYPTO_PRNG) += prng.o
> obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
>
> #
> diff --git a/crypto/prng.c b/crypto/prng.c
> new file mode 100644
> index 0000000..24e4f32
> --- /dev/null
> +++ b/crypto/prng.c
> @@ -0,0 +1,410 @@
> +/*
> + * PRNG: Pseudo Random Number Generator
> + * Based on NIST Recommended PRNG From ANSI X9.31 Appendix A.2.4 using
> + * AES 128 cipher in RFC3686 ctr mode
> + *
> + * (C) Neil Horman <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * any later version.
> + *
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/mm.h>
> +#include <linux/slab.h>
> +#include <linux/fs.h>
> +#include <linux/scatterlist.h>
> +#include <linux/string.h>
> +#include <linux/crypto.h>
> +#include <linux/highmem.h>
> +#include <linux/moduleparam.h>
> +#include <linux/jiffies.h>
> +#include <linux/timex.h>
> +#include <linux/interrupt.h>
> +#include <linux/miscdevice.h>

Is miscdevice.h needed?

> +#include "prng.h"
> +
> +#define TEST_PRNG_ON_START 0
> +
> +#define DEFAULT_PRNG_KEY "0123456789abcdef1011"
> +#define DEFAULT_PRNG_KSZ 20
> +#define DEFAULT_PRNG_IV "defaultv"
> +#define DEFAULT_PRNG_IVSZ 8
> +#define DEFAULT_BLK_SZ 16
> +#define DEFAULT_V_SEED "zaybxcwdveuftgsh"
> +
> +/*
> + * Flags for the prng_context flags field
> + */
> +
> +#define PRNG_FIXED_SIZE 0x1
> +#define PRNG_NEED_RESET 0x2
> +
> +/*
> + * Note: DT is our counter value
> + * I is our intermediate value
> + * V is our seed vector
> + * See http://csrc.nist.gov/groups/STM/cavp/documents/rng/931rngext.pdf
> + * for implementation details
> + */
> +
> +
> +struct prng_context {
> + char *prng_key;
> + char *prng_iv;
> + spinlock_t prng_lock;
> + unsigned char rand_data[DEFAULT_BLK_SZ];
> + unsigned char last_rand_data[DEFAULT_BLK_SZ];
> + unsigned char DT[DEFAULT_BLK_SZ];
> + unsigned char I[DEFAULT_BLK_SZ];
> + unsigned char V[DEFAULT_BLK_SZ];
> + u32 rand_data_valid;
> + struct crypto_blkcipher *tfm;
> + u32 flags;
> +};
> +
> +static int dbg;
> +
> +static void hexdump(char *note, unsigned char *buf, unsigned int len)
> +{
> + if (dbg) {
> + printk(KERN_CRIT "%s", note);
> + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET,
> + 16, 1,
> + buf, len, false);
> + }
> +}
> +
> +#define dbgprint(format, args...) do {if(dbg) printk(format, ##args);} while(0)
> +
> +static void xor_vectors(unsigned char *in1, unsigned char *in2,
> + unsigned char *out, unsigned int size)
> +{
> + int i;
> +
> + for (i=0;i<size;i++)
> + out[i] = in1[i] ^ in2[i];
> +
> +}
> +/*
> + * Returns DEFAULT_BLK_SZ bytes of random data per call
> + * returns 0 if generation succeded, <0 if something went wrong
> + */
> +static int _get_more_prng_bytes(struct prng_context *ctx)
> +{
> + int i;
> + struct blkcipher_desc desc;
> + struct scatterlist sg_in, sg_out;
> + int ret;
> + unsigned char tmp[DEFAULT_BLK_SZ];
> +
> + desc.tfm = ctx->tfm;
> + desc.flags = 0;
> +
> +
> + dbgprint(KERN_CRIT "Calling _get_more_prng_bytes for context %p\n",ctx);
> +
> + hexdump("Input DT: ", ctx->DT, DEFAULT_BLK_SZ);
> + hexdump("Input I: ", ctx->I, DEFAULT_BLK_SZ);
> + hexdump("Input V: ", ctx->V, DEFAULT_BLK_SZ);
> +
> + /*
> + * This algorithm is a 3 stage state machine
> + */
> + for (i=0;i<3;i++) {
> +
> + desc.tfm = ctx->tfm;
> + desc.flags = 0;
> + switch (i) {
> + case 0:
> + /*
> + * Start by encrypting the counter value
> + * This gives us an intermediate value I
> + */
> + memcpy(tmp, ctx->DT, DEFAULT_BLK_SZ);
> + sg_init_one(&sg_out, &ctx->I[0], DEFAULT_BLK_SZ);
> + hexdump("tmp stage 0: ", tmp, DEFAULT_BLK_SZ);
> + break;
> + case 1:
> +
> + /*
> + * Next xor I with our secret vector V
> + * encrypt that result to obtain our
> + * pseudo random data which we output
> + */
> + xor_vectors(ctx->I, ctx->V, tmp, DEFAULT_BLK_SZ);
> + sg_init_one(&sg_out, &ctx->rand_data[0], DEFAULT_BLK_SZ);
> + hexdump("tmp stage 1: ", tmp, DEFAULT_BLK_SZ);
> + break;
> + case 2:
> + /*
> + * First check that we didn't produce the same random data
> + * that we did last time around through this
> + */
> + if (!memcmp(ctx->rand_data, ctx->last_rand_data, DEFAULT_BLK_SZ)) {
> + printk(KERN_ERR "ctx %p Failed repetition check!\n",
> + ctx);
> + ctx->flags |= PRNG_NEED_RESET;
> + return -1;

Note the `return -1's.... (see below)

> + }
> + memcpy(ctx->last_rand_data, ctx->rand_data, DEFAULT_BLK_SZ);
> +
> + /*
> + * Lastly xor the random data with I
> + * and encrypt that to obtain a new secret vector V
> + */
> + xor_vectors(ctx->rand_data, ctx->I, tmp, DEFAULT_BLK_SZ);
> + sg_init_one(&sg_out, &ctx->V[0], DEFAULT_BLK_SZ);
> + hexdump("tmp stage 2: ", tmp, DEFAULT_BLK_SZ);
> + break;
> + }
> +
> + /* Initialize our input buffer */
> + sg_init_one(&sg_in, &tmp[0], DEFAULT_BLK_SZ);
> +
> + /* do the encryption */
> + ret = crypto_blkcipher_encrypt(&desc, &sg_out, &sg_in, DEFAULT_BLK_SZ);
> +
> + /* And check the result */
> + if (ret) {
> + dbgprint(KERN_CRIT "Encryption of new block failed for context %p\n",ctx);
> + ctx->rand_data_valid = DEFAULT_BLK_SZ;
> + return -1;
> + }
> +
> + }
> +
> + /*
> + * Now update our DT value
> + */
> + for (i=DEFAULT_BLK_SZ-1;i>0;i--) {
> + ctx->DT[i] = ctx->DT[i-1];
> + }
> + ctx->DT[0] += 1;
> +
> + dbgprint("Returning new block for context %p\n",ctx);
> + ctx->rand_data_valid = 0;
> +
> + hexdump("Output DT: ", ctx->DT, DEFAULT_BLK_SZ);
> + hexdump("Output I: ", ctx->I, DEFAULT_BLK_SZ);
> + hexdump("Output V: ", ctx->V, DEFAULT_BLK_SZ);
> + hexdump("New Random Data: ", ctx->rand_data, DEFAULT_BLK_SZ);

There will be some overhead in evaluating all the args, stacking them,
calling hexdump(), testing `dbg' then just returning.

This:

if (dbg) {
hexdump(...);
hexdump(...);
hexdump(...);
}

would save rather a lot of instructions.

> + return 0;
> +}
> +
> +/* Our exported functions */

It's good to document the exported interface (at least).

> +int get_prng_bytes(char *buf, int nbytes, struct prng_context *ctx)
> +{
> + unsigned long flags;
> + unsigned char *ptr = buf;
> + unsigned int byte_count = (unsigned int)nbytes;
> + int err;
> +
> +
> + if (nbytes < 0)
> + return -EINVAL;
> +
> + spin_lock_irqsave(&ctx->prng_lock, flags);
> +
> + err = -EFAULT;

Why -EFAULT?

> + if (ctx->flags & PRNG_NEED_RESET)
> + goto done;
> +
> + /*
> + * If the FIXED_SIZE flag is on, only return whole blocks of
> + * pseudo random data
> + */
> + err = -EINVAL;
> + if (ctx->flags & PRNG_FIXED_SIZE) {
> + if (nbytes < DEFAULT_BLK_SZ)
> + goto done;
> + byte_count = DEFAULT_BLK_SZ;
> + }
> +
> + err = byte_count;

So it returns the number of bytes copied on success, and -ve on error.

> + dbgprint(KERN_CRIT "getting %d random bytes for context %p\n",byte_count, ctx);
> +
> +
> +remainder:
> + if (ctx->rand_data_valid == DEFAULT_BLK_SZ) {
> + if (_get_more_prng_bytes(ctx) < 0) {
> + memset(buf, 0, nbytes);
> + err = -EFAULT;
> + goto done;
> + }
> + }
> +
> + /*
> + * Copy up to the next whole block size
> + */
> + if (byte_count < DEFAULT_BLK_SZ) {
> + for (;ctx->rand_data_valid < DEFAULT_BLK_SZ; ctx->rand_data_valid++) {
> + *ptr = ctx->rand_data[ctx->rand_data_valid];
> + ptr++;
> + byte_count--;
> + if (byte_count == 0)
> + goto done;
> + }
> + }
> +
> + /*
> + * Now copy whole blocks
> + */
> + for(;byte_count >= DEFAULT_BLK_SZ; byte_count -= DEFAULT_BLK_SZ) {
> + if (_get_more_prng_bytes(ctx) < 0) {
> + memset(buf, 0, nbytes);
> + err = -1;
> + goto done;
> + }
> + memcpy(ptr, ctx->rand_data, DEFAULT_BLK_SZ);
> + ctx->rand_data_valid += DEFAULT_BLK_SZ;
> + ptr += DEFAULT_BLK_SZ;
> + }
> +
> + /*
> + * Now copy any extra partial data
> + */
> + if (byte_count)
> + goto remainder;
> +
> +done:
> + spin_unlock_irqrestore(&ctx->prng_lock, flags);
> + dbgprint(KERN_CRIT "returning %d from get_prng_bytes in context %p\n",err, ctx);
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(get_prng_bytes);

On error the function will sometimes return -EFOO and other times will
just return -1. This is inconsistent and makes the error returns
rather less useful than they could be. I'd suggest that it be switched
to -1 throughout or, better, to consistently use appropriate error codes.

> +struct prng_context *alloc_prng_context(void)
> +{
> + struct prng_context *ctx=kzalloc(sizeof(struct prng_context), GFP_KERNEL);
> +
> + spin_lock_init(&ctx->prng_lock);
> +
> + if (reset_prng_context(ctx, NULL, NULL, NULL, NULL)) {
> + kfree(ctx);
> + ctx = NULL;
> + }
> +
> + dbgprint(KERN_CRIT "returning context %p\n",ctx);
> + return ctx;
> +}
> +
> +EXPORT_SYMBOL_GPL(alloc_prng_context);
> +
> +void free_prng_context(struct prng_context *ctx)
> +{
> + crypto_free_blkcipher(ctx->tfm);
> + kfree(ctx);
> +}
> +EXPORT_SYMBOL_GPL(free_prng_context);
> +
> +int reset_prng_context(struct prng_context *ctx,
> + unsigned char *key, unsigned char *iv,
> + unsigned char *V, unsigned char *DT)
> +{
> + int ret;
> + int iv_len;
> + int rc = -EFAULT;
> +
> + spin_lock(&ctx->prng_lock);
> + ctx->flags |= PRNG_NEED_RESET;
> +
> + if (key)
> + memcpy(ctx->prng_key,key,strlen(ctx->prng_key));
> + else
> + ctx->prng_key = DEFAULT_PRNG_KEY;

This is very strange. In one case we'll copy a string onto existing
storage at ctx->prng_key. In the other case we'll *modify*
ctx->prng_key directly.

This is quite unusual, and it makes it rather tricky for the owner of
ctx to clean it up correctly. It also introduces risks of memory leaks.

There is only one caller of this function, and that caller uses NULL
for all its arguments, so it looks like the first leg of all these `if'
statements has never been used.

I'd suggest that this interface needs a rethink. And documenting.

> + if (iv)
> + memcpy(ctx->prng_iv,iv, strlen(ctx->prng_iv));

Also, it's odd that we'll take a copy of a variable-length string
without checking its length and without in any way taking a copy of its
length. How can it ever be used?

If we choose to change this by taking a copy of the length and if we
decide that the way to do that is by sticking a \0 at the end of the
string then to above memcpy() could become a strcpy() (or similar).

We don't support \0's in the key or the IV. I assume that's OK?

> + else
> + ctx->prng_iv = DEFAULT_PRNG_IV;
> +
> + if (V)
> + memcpy(ctx->V,V,DEFAULT_BLK_SZ);
> + else
> + memcpy(ctx->V,DEFAULT_V_SEED,DEFAULT_BLK_SZ);
> +
> + if (DT)
> + memcpy(ctx->DT, DT, DEFAULT_BLK_SZ);
> + else
> + memset(ctx->DT, 0, DEFAULT_BLK_SZ);
> +
> + memset(ctx->rand_data,0,DEFAULT_BLK_SZ);
> + memset(ctx->last_rand_data,0,DEFAULT_BLK_SZ);
> +
> + if (ctx->tfm)
> + crypto_free_blkcipher(ctx->tfm);
> +
> + ctx->tfm = crypto_alloc_blkcipher("rfc3686(ctr(aes))",0,0);
> + if (!ctx->tfm) {
> + dbgprint(KERN_CRIT "Failed to alloc crypto tfm for context %p\n",ctx->tfm);
> + goto out;
> + }
> +
> + ctx->rand_data_valid = DEFAULT_BLK_SZ;
> +
> + ret = crypto_blkcipher_setkey(ctx->tfm, ctx->prng_key, strlen(ctx->prng_key));
> + if (ret) {
> + dbgprint(KERN_CRIT "PRNG: setkey() failed flags=%x\n",
> + crypto_blkcipher_get_flags(ctx->tfm));
> + crypto_free_blkcipher(ctx->tfm);
> + goto out;
> + }
> +
> + iv_len = crypto_blkcipher_ivsize(ctx->tfm);
> + if (iv_len) {
> + crypto_blkcipher_set_iv(ctx->tfm, ctx->prng_iv, iv_len);
> + }
> + rc = 0;
> + ctx->flags &= ~PRNG_NEED_RESET;
> +out:
> + spin_unlock(&ctx->prng_lock);
> +
> + return rc;
> +
> +}
> +EXPORT_SYMBOL_GPL(reset_prng_context);
> +
> +/* Module initalization */
> +static int __init prng_mod_init(void)
> +{
> +
> +#ifdef TEST_PRNG_ON_START

Might be nice to make this a module parameter.

> + int i;
> + unsigned char tmpbuf[DEFAULT_BLK_SZ];
> +
> + struct prng_context *ctx = alloc_prng_context();
> + if (ctx == NULL)
> + return -EFAULT;
> + for (i=0;i<16;i++) {
> + if (get_prng_bytes(tmpbuf, DEFAULT_BLK_SZ, ctx) < 0) {
> + free_prng_context(ctx);
> + return -EFAULT;
> + }
> + }
> + free_prng_context(ctx);
> +#endif
> +
> + return 0;
> +}
> +
> +static void __exit prng_mod_fini(void)
> +{
> + return;
> +}
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Software Pseudo Random Number Generator");
> +MODULE_AUTHOR("Neil Horman <[email protected]>");
> +module_param(dbg, int, 0);
> +MODULE_PARM_DESC(dbg, "Boolean to enable debugging (0/1 == off/on)");
> +module_init(prng_mod_init);
> +module_exit(prng_mod_fini);
> diff --git a/crypto/prng.h b/crypto/prng.h
> new file mode 100644
> index 0000000..1ac9be5
> --- /dev/null
> +++ b/crypto/prng.h
> @@ -0,0 +1,27 @@
> +/*
> + * PRNG: Pseudo Random Number Generator
> + *
> + * (C) Neil Horman <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * any later version.
> + *
> + *
> + */
> +
> +#ifndef _PRNG_H_
> +#define _PRNG_H_
> +struct prng_context;
> +
> +int get_prng_bytes(char *buf, int nbytes, struct prng_context *ctx);
> +struct prng_context *alloc_prng_context(void);
> +int reset_prng_context(struct prng_context *ctx,
> + unsigned char *key, unsigned char *iv,
> + unsigned char *V,
> + unsigned char *DT);
> +void free_prng_context(struct prng_context *ctx);
> +

2008-07-16 06:35:59

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Tue, Jul 15, 2008 at 11:17:34PM -0700, Andrew Morton wrote:
>
> On error the function will sometimes return -EFOO and other times will
> just return -1. This is inconsistent and makes the error returns
> rather less useful than they could be. I'd suggest that it be switched
> to -1 throughout or, better, to consistently use appropriate error codes.

Yes -1 should be replaced with a more meaningful error.
>
> > +struct prng_context *alloc_prng_context(void)
> > +{
> > + struct prng_context *ctx=kzalloc(sizeof(struct prng_context), GFP_KERNEL);
> > +
> > + spin_lock_init(&ctx->prng_lock);
> > +
> > + if (reset_prng_context(ctx, NULL, NULL, NULL, NULL)) {
> > + kfree(ctx);
> > + ctx = NULL;
> > + }
> > +
> > + dbgprint(KERN_CRIT "returning context %p\n",ctx);
> > + return ctx;
> > +}
> > +
> > +EXPORT_SYMBOL_GPL(alloc_prng_context);
> > +
> > +void free_prng_context(struct prng_context *ctx)
> > +{
> > + crypto_free_blkcipher(ctx->tfm);
> > + kfree(ctx);
> > +}
> > +EXPORT_SYMBOL_GPL(free_prng_context);
> > +
> > +int reset_prng_context(struct prng_context *ctx,
> > + unsigned char *key, unsigned char *iv,
> > + unsigned char *V, unsigned char *DT)
> > +{
> > + int ret;
> > + int iv_len;
> > + int rc = -EFAULT;
> > +
> > + spin_lock(&ctx->prng_lock);
> > + ctx->flags |= PRNG_NEED_RESET;
> > +
> > + if (key)
> > + memcpy(ctx->prng_key,key,strlen(ctx->prng_key));
> > + else
> > + ctx->prng_key = DEFAULT_PRNG_KEY;
>
> This is very strange. In one case we'll copy a string onto existing
> storage at ctx->prng_key. In the other case we'll *modify*
> ctx->prng_key directly.

Indeed this is bogus. We shouldn't store either the key or the
IV in the context since the tfm already holds a copy.

Neil, please remove prng_key and prng_iv completely.

> We don't support \0's in the key or the IV. I assume that's OK?

No the caller should supply the length instead.

Thanks,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

2008-07-16 17:13:17

by Joe Perches

[permalink] [raw]

Subject: Re: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e (reset_prng_context)

On Wed, 2008-07-16 at 01:49 +0400, Alexey Dobriyan wrote:
> On Tue, Jul 15, 2008 at 01:44:07PM -0700, David Miller wrote:
> > From: Ingo Molnar <[email protected]>
> > > Note that the new crypto/prng.c driver has very bad quality:
> > I think we should merge new drivers as aggressively as possible.
> Well, I don't have strong opinion about this exact statement, but
> Ingo, COULD YOU PLEASE [...] STOP THIS
> CHECKPATCH.PL-AS-INDICATOR HORSESHIT !

Coding style conformity (easy and clinical) and quality
(hard and emotional) are only weakly correlated in software.

I think that Ingo sometimes conflates them and he should be more
selective when using the "quality" term.

I think he recognizes this, he just hasn't done much about it.
http://lkml.org/lkml/2008/2/22/307

Ingo, could you please just substitute conformity for quality
in these sorts of posts? Perhaps you could also change the
name of your code-quality script to style-conformity?

2008-07-18 22:17:48