2008-08-30 21:19:55

by Rafael J. Wysocki

[permalink] [raw]
Subject: 2.6.27-rc5-git2: Reported regressions from 2.6.26

This message contains a list of some regressions from 2.6.26, for which there
are no fixes in the mainline I know of. If any of them have been fixed already,
please let me know.

If you know of any other unresolved regressions from 2.6.26, please let me know
either and I'll add them to the list. Also, please let me know if any of the
entries below are invalid.

Each entry from the list will be sent additionally in an automatic reply to
this message with CCs to the people involved in reporting and handling the
issue.


Listed regressions statistics:

Date Total Pending Unresolved
----------------------------------------
2008-08-30 135 48 36
2008-08-23 122 48 40
2008-08-16 103 47 37
2008-08-10 80 52 31
2008-08-02 47 31 20


Unresolved regressions
----------------------

Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11465
Subject : Linux-2.6.27-rc5, drm errors in log
Submitter : Gene Heskett <[email protected]>
Date : 2008-08-30 18:52 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122012238925775&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11464
Subject : BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!
Submitter : Thomas Backlund <[email protected]>
Date : 2008-08-30 12:46 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122010171130384&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11463
Subject : sshd hangs on close
Submitter : Matthias Urlichs <[email protected]>
Date : 2008-08-30 9:18 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122008800512864&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11460
Subject : 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt
Submitter : David Greaves <[email protected]>
Date : 2008-08-30 04:07 (1 days old)


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11459
Subject : kernel crash after wifi connection established
Submitter : Alexey Kuznetsov <[email protected]>
Date : 2008-08-30 03:08 (1 days old)


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11452
Subject : md (regression): reboot/shutdown hangs
Submitter : Alistair John Strachan <[email protected]>
Date : 2008-08-28 19:05 (3 days old)
References : http://marc.info/?l=linux-kernel&m=121995040514645&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11438
Subject : Upcoming oops in lockdep
Submitter : Arjan van de Ven <[email protected]>
Date : 2008-08-23 20:49 (8 days old)
References : http://marc.info/?l=linux-kernel&m=121952463613140&w=4
http://www.kerneloops.org/searchweek.php?search=mark_lock
Handled-By : Peter Zijlstra <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11435
Subject : oops due to smp_call_function_single changes
Submitter : Avi Kivity <[email protected]>
Date : 2008-08-24 16:41 (7 days old)
References : http://marc.info/?l=linux-kernel&m=121959612027162&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11407
Subject : suspend: unable to handle kernel paging request
Submitter : Vegard Nossum <[email protected]>
Date : 2008-08-21 17:28 (10 days old)
References : http://marc.info/?l=linux-kernel&m=121933974928881&w=4
Handled-By : Rafael J. Wysocki <[email protected]>
Pekka Enberg <[email protected]>
Pavel Machek <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11404
Subject : BUG: in 2.6.23-rc3-git7 in do_cciss_intr
Submitter : rdunlap <[email protected]>
Date : 2008-08-21 5:52 (10 days old)
References : http://marc.info/?l=linux-kernel&m=121929819616273&w=4
http://marc.info/?l=linux-kernel&m=121932889105368&w=4
Handled-By : Miller, Mike (OS Dev) <[email protected]>
James Bottomley <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11403
Subject : 2.6.27-rc2 USB suspend regression
Submitter : Jeremy Fitzhardinge <[email protected]>
Date : 2008-08-20 20:48 (11 days old)
References : http://marc.info/?l=linux-kernel&m=121926536103630&w=4
Handled-By : Alan Stern <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11398
Subject : hda_intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Submitter : Frans Pop <[email protected]>
Date : 2008-08-21 17:17 (10 days old)


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11388
Subject : 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
Submitter : Joshua Hoblitt <[email protected]>
Date : 2008-08-20 17:38 (11 days old)


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11382
Subject : e1000e: 2.6.27-rc1 corrupts EEPROM/NVM
Submitter : David Vrabel <[email protected]>
Date : 2008-08-08 10:47 (23 days old)
References : http://marc.info/?l=linux-kernel&m=121819267211679&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11380
Subject : lockdep warning: cpu_add_remove_lock at:cpu_maps_update_begin+0x14/0x16
Submitter : Ingo Molnar <[email protected]>
Date : 2008-08-20 6:44 (11 days old)
References : http://marc.info/?l=linux-kernel&m=121921480931970&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11357
Subject : Can not boot up with zd1211rw USB-Wlan Stick
Submitter : uwe <[email protected]>
Date : 2008-08-16 14:17 (15 days old)


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11355
Subject : Regression in 2.6.27-rc2 when cross-building the kernel
Submitter : Larry Finger <[email protected]>
Date : 2008-08-16 2:38 (15 days old)
References : http://marc.info/?l=linux-kernel&m=121885432118368&w=4
Handled-By : Sam Ravnborg <[email protected]>
David Woodhouse <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11343
Subject : SATA Cold Boot Problems with 2.6.27-rc[23] on nVidia 680i
Submitter : Manny Maxwell <[email protected]>
Date : 2008-08-14 4:16 (17 days old)
References : http://marc.info/?l=linux-kernel&m=121868782917600&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11340
Subject : LTP overnight run resulted in unusable box
Submitter : Alexey Dobriyan <[email protected]>
Date : 2008-08-13 9:24 (18 days old)
References : http://marc.info/?l=linux-kernel&m=121861951902949&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11336
Subject : 2.6.27-rc2:stall while mounting root fs
Submitter : Torsten Kaiser <[email protected]>
Date : 2008-08-12 12:37 (19 days old)
References : http://marc.info/?l=linux-kernel&m=121854484015909&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11335
Subject : 2.6.27-rc2-git5 BUG: unable to handle kernel paging request
Submitter : Randy Dunlap <[email protected]>
Date : 2008-08-12 4:18 (19 days old)
References : http://marc.info/?l=linux-kernel&m=121851477201960&w=4
http://lkml.org/lkml/2008/8/16/274
Handled-By : Hugh Dickins <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11334
Subject : myri10ge: use ioremap_wc: compilation failure on ARM
Submitter : Martin Michlmayr <[email protected]>
Date : 2008-08-10 11:25 (21 days old)
References : http://marc.info/?l=linux-netdev&m=121836771727632&w=2


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11308
Subject : tbench regression on each kernel release from 2.6.22 -&gt; 2.6.28
Submitter : Christoph Lameter <[email protected]>
Date : 2008-08-11 18:36 (20 days old)
References : http://marc.info/?l=linux-kernel&m=121847986119495&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11279
Subject : 2.6.27-rc0 Power Bugs with HP/Compaq Laptops
Submitter : Matt Parnell <[email protected]>
Date : 2008-08-07 14:57 (24 days old)
References : http://marc.info/?l=linux-kernel&m=121812108031685&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11272
Subject : BUG: parport_serial in 2.6.27-rc1 for NetMos Technology PCI 9835
Submitter : Jaswinder Singh <[email protected]>
Date : 2008-08-05 15:12 (26 days old)
References : http://marc.info/?l=linux-kernel&m=121794900319776&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11271
Subject : BUG: fealnx in 2.6.27-rc1
Submitter : Jaswinder Singh <[email protected]>
Date : 2008-08-05 14:58 (26 days old)
References : http://marc.info/?l=linux-netdev&m=121794762016830&w=4
http://lkml.org/lkml/2008/8/10/98
Handled-By : Francois Romieu <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11264
Subject : Invalid op opcode in kernel/workqueue
Submitter : Jean-Luc Coulon <[email protected]>
Date : 2008-08-07 04:18 (24 days old)


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11237
Subject : corrupt PMD after resume
Submitter : Alan Jenkins <[email protected]>
Date : 2008-08-02 9:51 (29 days old)
References : http://marc.info/?l=linux-kernel&m=121767073424952&w=4
Handled-By : Hugh Dickins <[email protected]>
Jeremy Fitzhardinge <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11230
Subject : Kconfig no longer outputs a .config with freshly updated defconfigs
Submitter : Josh Boyer <[email protected]>
Date : 2008-08-02 16:03 (29 days old)
References : http://marc.info/?l=linux-kernel&m=121769306319391&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11224
Subject : Only three cores found on quad-core machine.
Submitter : Dave Jones <[email protected]>
Date : 2008-08-01 18:15 (30 days old)
References : http://marc.info/?l=linux-kernel&m=121761475224719&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11220
Subject : Screen stays black after resume
Submitter : Nico Schottelius <[email protected]>
Date : 2008-07-31 21:05 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121753882422899&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11215
Subject : INFO: possible recursive locking detected ps2_command
Submitter : Zdenek Kabelac <[email protected]>
Date : 2008-07-31 9:41 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121749737011637&w=4
Handled-By : Peter Zijlstra <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11210
Subject : libata badness
Submitter : Kumar Gala <[email protected]>
Date : 2008-07-31 18:53 (31 days old)
References : http://marc.info/?l=linux-ide&m=121753059307310&w=4
Handled-By : Kumar Gala <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11209
Subject : 2.6.27-rc1 process time accounting
Submitter : Lukas Hejtmanek <[email protected]>
Date : 2008-07-31 10:43 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121750102917490&w=4
Handled-By : Peter Zijlstra <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11191
Subject : 2.6.26-git8: spinlock lockup in c1e_idle()
Submitter : Mikhail Kshevetskiy <[email protected]>
Date : 2008-07-24 03:22 (38 days old)
References : http://lkml.org/lkml/2008/7/23/317
Handled-By : Thomas Gleixner <[email protected]>


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11141
Subject : no battery or DC status - Dell i1501
Submitter : Gu Rui <[email protected]>
Date : 2008-07-21 19:43 (41 days old)
Handled-By : Zhao Yakui <[email protected]>


Regressions with patches
------------------------

Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11462
Subject : v2.6.27-rc5 regression: mtd/block device issue with cmd_filter
Submitter : Laurent Pinchart <[email protected]>
Date : 2008-08-29 10:50 (2 days old)
References : http://marc.info/?l=linux-kernel&m=122000707631759&w=4
http://marc.info/?l=linux-kernel&m=122011643217462&w=4
Handled-By : Jens Axboe <[email protected]>
FUJITA Tomonori fujita.tomonori at lab.ntt.co.jp&gt;
Patch : http://lists.infradead.org/pipermail/linux-mtd/2008-August/022874.html


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11461
Subject : build breakage
Submitter : Helge Deller <[email protected]>
Date : 2008-08-30 10:34 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122009254918593&w=4
Handled-By : Helge Deller <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=122009254918593&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11451
Subject : /proc/acpi/ibm/wan stopped appearing
Submitter : Jeremy Fitzhardinge <[email protected]>
Date : 2008-08-27 22:11 (4 days old)
References : http://marc.info/?l=linux-kernel&m=121987514922627&w=4
Handled-By : Henrique de Moraes Holschuh <[email protected]>
Jeremy Fitzhardinge <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121989632915800&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11442
Subject : btusb hibernation/suspend breakage in current -git
Submitter : Rafael J. Wysocki <[email protected]>
Date : 2008-08-25 11:37 (6 days old)
References : http://marc.info/?l=linux-bluetooth&m=121966402012074&w=4
Handled-By : Oliver Neukum <[email protected]>
Patch : http://marc.info/?l=linux-bluetooth&m=121967226027323&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11441
Subject : lots of 'in_atomic():1, irqs_disabled():0' with software-raid1
Submitter : jurriaan <[email protected]>
Date : 2008-08-27 17:05 (4 days old)
References : http://marc.info/?l=linux-kernel&m=121985847724696&w=4
Handled-By : Jens Axboe <[email protected]>
Neil Brown <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121998896602338&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11439
Subject : [2.6.27-rc4-git4] compilation warnings
Submitter : Rufus &amp; Azrael <[email protected]>
Date : 2008-08-26 9:37 (5 days old)
References : http://marc.info/?l=linux-kernel&m=121974353815440&w=4
Handled-By : Greg KH <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121976424221858&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11410
Subject : SLUB list_lock vs obj_hash.lock...
Submitter : Daniel J Blueman <[email protected]>
Date : 2008-08-22 21:48 (9 days old)
References : http://marc.info/?l=linux-kernel&m=121944176609042&w=4
Handled-By : Vegard Nossum <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121993767320698&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11409
Subject : build issue #564 for v2.6.27-rc4 : undefined reference to `NS8390p_init'
Submitter : Toralf Förster <[email protected]>
Date : 2008-08-22 8:33 (9 days old)
References : http://marc.info/?l=linux-kernel&m=121939410214677&w=4
Handled-By : Alan Cox <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121943097320451&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11361
Subject : my servers with nvidia mcp55 nic don't work with msi in second kernel by kexec
Submitter : Yinghai Lu <[email protected]>
Date : 2008-08-17 6:25 (14 days old)
References : http://marc.info/?l=linux-kernel&m=121895439927053&w=4
Handled-By : Rafael J. Wysocki <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121917167232014&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11358
Subject : net: forcedeth call restore mac addr in nv_shutdown path
Submitter : Yinghai Lu <[email protected]>
Date : 2008-08-17 3:30 (14 days old)
References : http://marc.info/?l=linux-kernel&m=121894389018584&w=4
Handled-By : Yinghai Lu <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121894389018584&w=4


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11276
Subject : build error: CONFIG_OPTIMIZE_INLINING=y causes gcc 4.2 to do stupid things
Submitter : Randy Dunlap <[email protected]>
Date : 2008-08-06 17:18 (25 days old)
References : http://marc.info/?l=linux-kernel&m=121804329014332&w=4
http://lkml.org/lkml/2008/7/22/353
Handled-By : Bjorn Helgaas <[email protected]>
Patch : http://lkml.org/lkml/2008/7/22/364


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11207
Subject : VolanoMark regression with 2.6.27-rc1
Submitter : Zhang, Yanmin <[email protected]>
Date : 2008-07-31 3:20 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121747464114335&w=4
Handled-By : Zhang, Yanmin <[email protected]>
Peter Zijlstra <[email protected]>
Dhaval Giani <[email protected]>
Miao Xie <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121922991027344&w=4


For details, please visit the bug entries and follow the links given in
references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.26,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=11167

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Thanks,
Rafael


2008-08-30 21:20:18

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11141] no battery or DC status - Dell i1501

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11141
Subject : no battery or DC status - Dell i1501
Submitter : Gu Rui <[email protected]>
Date : 2008-07-21 19:43 (41 days old)
Handled-By : Zhao Yakui <[email protected]>

2008-08-30 21:23:45

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11191] 2.6.26-git8: spinlock lockup in c1e_idle()

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11191
Subject : 2.6.26-git8: spinlock lockup in c1e_idle()
Submitter : Mikhail Kshevetskiy <[email protected]>
Date : 2008-07-24 03:22 (38 days old)
References : http://lkml.org/lkml/2008/7/23/317
Handled-By : Thomas Gleixner <[email protected]>

2008-08-30 21:23:59

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11215] INFO: possible recursive locking detected ps2_command

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11215
Subject : INFO: possible recursive locking detected ps2_command
Submitter : Zdenek Kabelac <[email protected]>
Date : 2008-07-31 9:41 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121749737011637&w=4
Handled-By : Peter Zijlstra <[email protected]>

2008-08-30 21:24:29

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11209] 2.6.27-rc1 process time accounting

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11209
Subject : 2.6.27-rc1 process time accounting
Submitter : Lukas Hejtmanek <[email protected]>
Date : 2008-07-31 10:43 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121750102917490&w=4
Handled-By : Peter Zijlstra <[email protected]>

2008-08-30 21:24:52

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11207] VolanoMark regression with 2.6.27-rc1

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11207
Subject : VolanoMark regression with 2.6.27-rc1
Submitter : Zhang, Yanmin <[email protected]>
Date : 2008-07-31 3:20 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121747464114335&w=4
Handled-By : Zhang, Yanmin <[email protected]>
Peter Zijlstra <[email protected]>
Dhaval Giani <[email protected]>
Miao Xie <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121922991027344&w=4

2008-08-30 21:25:13

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11210] libata badness

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11210
Subject : libata badness
Submitter : Kumar Gala <[email protected]>
Date : 2008-07-31 18:53 (31 days old)
References : http://marc.info/?l=linux-ide&m=121753059307310&w=4
Handled-By : Kumar Gala <[email protected]>

2008-08-30 21:26:03

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11334] myri10ge: use ioremap_wc: compilation failure on ARM

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11334
Subject : myri10ge: use ioremap_wc: compilation failure on ARM
Submitter : Martin Michlmayr <[email protected]>
Date : 2008-08-10 11:25 (21 days old)
References : http://marc.info/?l=linux-netdev&m=121836771727632&w=2

2008-08-30 21:25:42

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11220] Screen stays black after resume

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11220
Subject : Screen stays black after resume
Submitter : Nico Schottelius <[email protected]>
Date : 2008-07-31 21:05 (31 days old)
References : http://marc.info/?l=linux-kernel&m=121753882422899&w=4

2008-08-30 21:26:44

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11224] Only three cores found on quad-core machine.

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11224
Subject : Only three cores found on quad-core machine.
Submitter : Dave Jones <[email protected]>
Date : 2008-08-01 18:15 (30 days old)
References : http://marc.info/?l=linux-kernel&m=121761475224719&w=4

2008-08-30 21:26:27

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11237] corrupt PMD after resume

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11237
Subject : corrupt PMD after resume
Submitter : Alan Jenkins <[email protected]>
Date : 2008-08-02 9:51 (29 days old)
References : http://marc.info/?l=linux-kernel&m=121767073424952&w=4
Handled-By : Hugh Dickins <[email protected]>
Jeremy Fitzhardinge <[email protected]>

2008-08-30 21:27:05

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11276] build error: CONFIG_OPTIMIZE_INLINING=y causes gcc 4.2 to do stupid things

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11276
Subject : build error: CONFIG_OPTIMIZE_INLINING=y causes gcc 4.2 to do stupid things
Submitter : Randy Dunlap <[email protected]>
Date : 2008-08-06 17:18 (25 days old)
References : http://marc.info/?l=linux-kernel&m=121804329014332&w=4
http://lkml.org/lkml/2008/7/22/353
Handled-By : Bjorn Helgaas <[email protected]>
Patch : http://lkml.org/lkml/2008/7/22/364

2008-08-30 21:27:30

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11272] BUG: parport_serial in 2.6.27-rc1 for NetMos Technology PCI 9835

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11272
Subject : BUG: parport_serial in 2.6.27-rc1 for NetMos Technology PCI 9835
Submitter : Jaswinder Singh <[email protected]>
Date : 2008-08-05 15:12 (26 days old)
References : http://marc.info/?l=linux-kernel&m=121794900319776&w=4

2008-08-30 21:27:46

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11271] BUG: fealnx in 2.6.27-rc1

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11271
Subject : BUG: fealnx in 2.6.27-rc1
Submitter : Jaswinder Singh <[email protected]>
Date : 2008-08-05 14:58 (26 days old)
References : http://marc.info/?l=linux-netdev&m=121794762016830&w=4
http://lkml.org/lkml/2008/8/10/98
Handled-By : Francois Romieu <[email protected]>

2008-08-30 21:28:06

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11279] 2.6.27-rc0 Power Bugs with HP/Compaq Laptops

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11279
Subject : 2.6.27-rc0 Power Bugs with HP/Compaq Laptops
Submitter : Matt Parnell <[email protected]>
Date : 2008-08-07 14:57 (24 days old)
References : http://marc.info/?l=linux-kernel&m=121812108031685&w=4

2008-08-30 21:28:32

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11264] Invalid op opcode in kernel/workqueue

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11264
Subject : Invalid op opcode in kernel/workqueue
Submitter : Jean-Luc Coulon <[email protected]>
Date : 2008-08-07 04:18 (24 days old)

2008-08-30 21:28:46

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11230] Kconfig no longer outputs a .config with freshly updated defconfigs

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11230
Subject : Kconfig no longer outputs a .config with freshly updated defconfigs
Submitter : Josh Boyer <[email protected]>
Date : 2008-08-02 16:03 (29 days old)
References : http://marc.info/?l=linux-kernel&m=121769306319391&w=4

2008-08-30 21:29:09

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11308] tbench regression on each kernel release from 2.6.22 -&gt; 2.6.28

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11308
Subject : tbench regression on each kernel release from 2.6.22 -&gt; 2.6.28
Submitter : Christoph Lameter <[email protected]>
Date : 2008-08-11 18:36 (20 days old)
References : http://marc.info/?l=linux-kernel&m=121847986119495&w=4

2008-08-30 21:29:27

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11335] 2.6.27-rc2-git5 BUG: unable to handle kernel paging request

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11335
Subject : 2.6.27-rc2-git5 BUG: unable to handle kernel paging request
Submitter : Randy Dunlap <[email protected]>
Date : 2008-08-12 4:18 (19 days old)
References : http://marc.info/?l=linux-kernel&m=121851477201960&w=4
http://lkml.org/lkml/2008/8/16/274
Handled-By : Hugh Dickins <[email protected]>

2008-08-30 21:29:45

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11343] SATA Cold Boot Problems with 2.6.27-rc[23] on nVidia 680i

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11343
Subject : SATA Cold Boot Problems with 2.6.27-rc[23] on nVidia 680i
Submitter : Manny Maxwell <[email protected]>
Date : 2008-08-14 4:16 (17 days old)
References : http://marc.info/?l=linux-kernel&m=121868782917600&w=4

2008-08-30 21:30:01

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11336] 2.6.27-rc2:stall while mounting root fs

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11336
Subject : 2.6.27-rc2:stall while mounting root fs
Submitter : Torsten Kaiser <[email protected]>
Date : 2008-08-12 12:37 (19 days old)
References : http://marc.info/?l=linux-kernel&m=121854484015909&w=4

2008-08-30 21:30:35

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11340] LTP overnight run resulted in unusable box

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11340
Subject : LTP overnight run resulted in unusable box
Submitter : Alexey Dobriyan <[email protected]>
Date : 2008-08-13 9:24 (18 days old)
References : http://marc.info/?l=linux-kernel&m=121861951902949&w=4

2008-08-30 21:30:53

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11355] Regression in 2.6.27-rc2 when cross-building the kernel

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11355
Subject : Regression in 2.6.27-rc2 when cross-building the kernel
Submitter : Larry Finger <[email protected]>
Date : 2008-08-16 2:38 (15 days old)
References : http://marc.info/?l=linux-kernel&m=121885432118368&w=4
Handled-By : Sam Ravnborg <[email protected]>
David Woodhouse <[email protected]>

2008-08-30 21:31:17

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11357] Can not boot up with zd1211rw USB-Wlan Stick

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11357
Subject : Can not boot up with zd1211rw USB-Wlan Stick
Submitter : uwe <[email protected]>
Date : 2008-08-16 14:17 (15 days old)

2008-08-30 21:31:35

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11380] lockdep warning: cpu_add_remove_lock at:cpu_maps_update_begin+0x14/0x16

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11380
Subject : lockdep warning: cpu_add_remove_lock at:cpu_maps_update_begin+0x14/0x16
Submitter : Ingo Molnar <[email protected]>
Date : 2008-08-20 6:44 (11 days old)
References : http://marc.info/?l=linux-kernel&m=121921480931970&w=4

2008-08-30 21:32:13

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11382] e1000e: 2.6.27-rc1 corrupts EEPROM/NVM

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11382
Subject : e1000e: 2.6.27-rc1 corrupts EEPROM/NVM
Submitter : David Vrabel <[email protected]>
Date : 2008-08-08 10:47 (23 days old)
References : http://marc.info/?l=linux-kernel&m=121819267211679&w=4

2008-08-30 21:31:49

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11361] my servers with nvidia mcp55 nic don't work with msi in second kernel by kexec

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11361
Subject : my servers with nvidia mcp55 nic don't work with msi in second kernel by kexec
Submitter : Yinghai Lu <[email protected]>
Date : 2008-08-17 6:25 (14 days old)
References : http://marc.info/?l=linux-kernel&m=121895439927053&w=4
Handled-By : Rafael J. Wysocki <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121917167232014&w=4

2008-08-30 21:32:31

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11358] net: forcedeth call restore mac addr in nv_shutdown path

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11358
Subject : net: forcedeth call restore mac addr in nv_shutdown path
Submitter : Yinghai Lu <[email protected]>
Date : 2008-08-17 3:30 (14 days old)
References : http://marc.info/?l=linux-kernel&m=121894389018584&w=4
Handled-By : Yinghai Lu <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121894389018584&w=4

2008-08-30 21:32:47

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11388] 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11388
Subject : 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
Submitter : Joshua Hoblitt <[email protected]>
Date : 2008-08-20 17:38 (11 days old)

2008-08-30 21:33:04

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11403] 2.6.27-rc2 USB suspend regression

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11403
Subject : 2.6.27-rc2 USB suspend regression
Submitter : Jeremy Fitzhardinge <[email protected]>
Date : 2008-08-20 20:48 (11 days old)
References : http://marc.info/?l=linux-kernel&m=121926536103630&w=4
Handled-By : Alan Stern <[email protected]>

2008-08-30 21:33:31

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11398] hda_intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11398
Subject : hda_intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Submitter : Frans Pop <[email protected]>
Date : 2008-08-21 17:17 (10 days old)

2008-08-30 21:33:46

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11404] BUG: in 2.6.23-rc3-git7 in do_cciss_intr

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11404
Subject : BUG: in 2.6.23-rc3-git7 in do_cciss_intr
Submitter : rdunlap <[email protected]>
Date : 2008-08-21 5:52 (10 days old)
References : http://marc.info/?l=linux-kernel&m=121929819616273&w=4
http://marc.info/?l=linux-kernel&m=121932889105368&w=4
Handled-By : Miller, Mike (OS Dev) <[email protected]>
James Bottomley <[email protected]>

2008-08-30 21:34:07

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11407] suspend: unable to handle kernel paging request

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11407
Subject : suspend: unable to handle kernel paging request
Submitter : Vegard Nossum <[email protected]>
Date : 2008-08-21 17:28 (10 days old)
References : http://marc.info/?l=linux-kernel&m=121933974928881&w=4
Handled-By : Rafael J. Wysocki <[email protected]>
Pekka Enberg <[email protected]>
Pavel Machek <[email protected]>

2008-08-30 21:34:25

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11439] [2.6.27-rc4-git4] compilation warnings

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11439
Subject : [2.6.27-rc4-git4] compilation warnings
Submitter : Rufus &amp; Azrael <[email protected]>
Date : 2008-08-26 9:37 (5 days old)
References : http://marc.info/?l=linux-kernel&m=121974353815440&w=4
Handled-By : Greg KH <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121976424221858&w=4

2008-08-30 21:34:56

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11435] oops due to smp_call_function_single changes

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11435
Subject : oops due to smp_call_function_single changes
Submitter : Avi Kivity <[email protected]>
Date : 2008-08-24 16:41 (7 days old)
References : http://marc.info/?l=linux-kernel&m=121959612027162&w=4

2008-08-30 21:34:41

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11438] Upcoming oops in lockdep

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11438
Subject : Upcoming oops in lockdep
Submitter : Arjan van de Ven <[email protected]>
Date : 2008-08-23 20:49 (8 days old)
References : http://marc.info/?l=linux-kernel&m=121952463613140&w=4
http://www.kerneloops.org/searchweek.php?search=mark_lock
Handled-By : Peter Zijlstra <[email protected]>

2008-08-30 21:35:27

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11410] SLUB list_lock vs obj_hash.lock...

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11410
Subject : SLUB list_lock vs obj_hash.lock...
Submitter : Daniel J Blueman <[email protected]>
Date : 2008-08-22 21:48 (9 days old)
References : http://marc.info/?l=linux-kernel&m=121944176609042&w=4
Handled-By : Vegard Nossum <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121993767320698&w=4

2008-08-30 21:35:51

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11441] lots of 'in_atomic():1, irqs_disabled():0' with software-raid1

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11441
Subject : lots of 'in_atomic():1, irqs_disabled():0' with software-raid1
Submitter : jurriaan <[email protected]>
Date : 2008-08-27 17:05 (4 days old)
References : http://marc.info/?l=linux-kernel&m=121985847724696&w=4
Handled-By : Jens Axboe <[email protected]>
Neil Brown <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121998896602338&w=4

2008-08-30 21:36:13

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11452] md (regression): reboot/shutdown hangs

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11452
Subject : md (regression): reboot/shutdown hangs
Submitter : Alistair John Strachan <[email protected]>
Date : 2008-08-28 19:05 (3 days old)
References : http://marc.info/?l=linux-kernel&m=121995040514645&w=4

2008-08-30 21:36:33

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11459] kernel crash after wifi connection established

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11459
Subject : kernel crash after wifi connection established
Submitter : Alexey Kuznetsov <[email protected]>
Date : 2008-08-30 03:08 (1 days old)

2008-08-30 21:36:47

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11461] build breakage

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11461
Subject : build breakage
Submitter : Helge Deller <[email protected]>
Date : 2008-08-30 10:34 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122009254918593&w=4
Handled-By : Helge Deller <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=122009254918593&w=4

2008-08-30 21:37:09

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11462] v2.6.27-rc5 regression: mtd/block device issue with cmd_filter

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11462
Subject : v2.6.27-rc5 regression: mtd/block device issue with cmd_filter
Submitter : Laurent Pinchart <[email protected]>
Date : 2008-08-29 10:50 (2 days old)
References : http://marc.info/?l=linux-kernel&m=122000707631759&w=4
http://marc.info/?l=linux-kernel&m=122011643217462&w=4
Handled-By : Jens Axboe <[email protected]>
FUJITA Tomonori fujita.tomonori at lab.ntt.co.jp&gt;
Patch : http://lists.infradead.org/pipermail/linux-mtd/2008-August/022874.html

2008-08-30 21:37:36

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11463] sshd hangs on close

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11463
Subject : sshd hangs on close
Submitter : Matthias Urlichs <[email protected]>
Date : 2008-08-30 9:18 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122008800512864&w=4

2008-08-30 21:37:51

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11464] BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11464
Subject : BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!
Submitter : Thomas Backlund <[email protected]>
Date : 2008-08-30 12:46 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122010171130384&w=4

2008-08-30 21:38:10

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11460] 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11460
Subject : 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt
Submitter : David Greaves <[email protected]>
Date : 2008-08-30 04:07 (1 days old)

2008-08-30 21:38:33

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11465] Linux-2.6.27-rc5, drm errors in log

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11465
Subject : Linux-2.6.27-rc5, drm errors in log
Submitter : Gene Heskett <[email protected]>
Date : 2008-08-30 18:52 (1 days old)
References : http://marc.info/?l=linux-kernel&m=122012238925775&w=4
Handled-By : Arjan van de Ven <[email protected]>

2008-08-30 21:38:46

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11451] /proc/acpi/ibm/wan stopped appearing

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11451
Subject : /proc/acpi/ibm/wan stopped appearing
Submitter : Jeremy Fitzhardinge <[email protected]>
Date : 2008-08-27 22:11 (4 days old)
References : http://marc.info/?l=linux-kernel&m=121987514922627&w=4
Handled-By : Henrique de Moraes Holschuh <[email protected]>
Jeremy Fitzhardinge <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121989632915800&w=4

2008-08-30 21:39:13

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11442] btusb hibernation/suspend breakage in current -git

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11442
Subject : btusb hibernation/suspend breakage in current -git
Submitter : Rafael J. Wysocki <[email protected]>
Date : 2008-08-25 11:37 (6 days old)
References : http://marc.info/?l=linux-bluetooth&m=121966402012074&w=4
Handled-By : Oliver Neukum <[email protected]>
Patch : http://marc.info/?l=linux-bluetooth&m=121967226027323&w=4

2008-08-30 21:39:28

by Rafael J. Wysocki

[permalink] [raw]
Subject: [Bug #11409] build issue #564 for v2.6.27-rc4 : undefined reference to `NS8390p_init'

This message has been generated automatically as a part of a report
of recent regressions.

The following bug entry is on the current list of known regressions
from 2.6.26. Please verify if it still should be listed and let me know
(either way).


Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11409
Subject : build issue #564 for v2.6.27-rc4 : undefined reference to `NS8390p_init'
Submitter : Toralf Förster <[email protected]>
Date : 2008-08-22 8:33 (9 days old)
References : http://marc.info/?l=linux-kernel&m=121939410214677&w=4
Handled-By : Alan Cox <[email protected]>
Patch : http://marc.info/?l=linux-kernel&m=121943097320451&w=4

2008-08-30 21:39:45

by Yinghai Lu

[permalink] [raw]
Subject: Re: [Bug #11388] 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable

On Sat, Aug 30, 2008 at 12:50 PM, Rafael J. Wysocki <[email protected]> wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11388
> Subject : 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
> Submitter : Joshua Hoblitt <[email protected]>
> Date : 2008-08-20 17:38 (11 days old)
>
>
>

this should be closed

commit 38cc1c3df77c1bb739a4766788eb9fa49f16ffdf
x86: work around MTRR mask setting

fixed it.

YH

2008-08-30 21:40:33

by David Miller

[permalink] [raw]
Subject: Re: 2.6.27-rc5-git2: Reported regressions from 2.6.26

From: "Rafael J. Wysocki" <[email protected]>
Date: Sat, 30 Aug 2008 21:46:30 +0200 (CEST)

> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11409
> Subject : build issue #564 for v2.6.27-rc4 : undefined reference to `NS8390p_init'
> Submitter : Toralf F?rster <[email protected]>
> Date : 2008-08-22 8:33 (9 days old)
> References : http://marc.info/?l=linux-kernel&m=121939410214677&w=4
> Handled-By : Alan Cox <[email protected]>
> Patch : http://marc.info/?l=linux-kernel&m=121943097320451&w=4

Should be fixed by:

commit d3d7b53d1ae46534cd73e1073a5c29e3b61a0552
Author: Alan Cox <[email protected]>
Date: Fri Aug 22 19:24:15 2008 +0100

[netdrvr] fix build issue: undefined reference to `NS8390p_init'

Signed-off-by: Alan 'pass the paper bags' Cox <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>

2008-08-30 21:40:52

by Larry Finger

[permalink] [raw]
Subject: Re: [Bug #11355] Regression in 2.6.27-rc2 when cross-building the kernel

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11355
> Subject : Regression in 2.6.27-rc2 when cross-building the kernel
> Submitter : Larry Finger <[email protected]>
> Date : 2008-08-16 2:38 (15 days old)
> References : http://marc.info/?l=linux-kernel&m=121885432118368&w=4
> Handled-By : Sam Ravnborg <[email protected]>
> David Woodhouse <[email protected]>

Not fixed yet.

Larry

2008-08-30 21:41:11

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: [Bug #11388] 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable

On Saturday, 30 of August 2008, Yinghai Lu wrote:
> On Sat, Aug 30, 2008 at 12:50 PM, Rafael J. Wysocki <[email protected]> wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.26. Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11388
> > Subject : 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
> > Submitter : Joshua Hoblitt <[email protected]>
> > Date : 2008-08-20 17:38 (11 days old)
> >
> >
> >
>
> this should be closed
>
> commit 38cc1c3df77c1bb739a4766788eb9fa49f16ffdf
> x86: work around MTRR mask setting
>
> fixed it.

Thanks, closed now.

Rafael

2008-08-30 21:41:29

by Peter Zijlstra

[permalink] [raw]
Subject: Re: [Bug #11438] Upcoming oops in lockdep

On Sat, 2008-08-30 at 21:50 +0200, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11438
> Subject : Upcoming oops in lockdep
> Submitter : Arjan van de Ven <[email protected]>
> Date : 2008-08-23 20:49 (8 days old)
> References : http://marc.info/?l=linux-kernel&m=121952463613140&w=4
> http://www.kerneloops.org/searchweek.php?search=mark_lock
> Handled-By : Peter Zijlstra <[email protected]>

as far as I'm concerned this has nothing to do with lockdep

2008-08-30 21:41:44

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: 2.6.27-rc5-git2: Reported regressions from 2.6.26

On Saturday, 30 of August 2008, David Miller wrote:
> From: "Rafael J. Wysocki" <[email protected]>
> Date: Sat, 30 Aug 2008 21:46:30 +0200 (CEST)
>
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11409
> > Subject : build issue #564 for v2.6.27-rc4 : undefined reference to `NS8390p_init'
> > Submitter : Toralf F?rster <[email protected]>
> > Date : 2008-08-22 8:33 (9 days old)
> > References : http://marc.info/?l=linux-kernel&m=121939410214677&w=4
> > Handled-By : Alan Cox <[email protected]>
> > Patch : http://marc.info/?l=linux-kernel&m=121943097320451&w=4
>
> Should be fixed by:
>
> commit d3d7b53d1ae46534cd73e1073a5c29e3b61a0552
> Author: Alan Cox <[email protected]>
> Date: Fri Aug 22 19:24:15 2008 +0100
>
> [netdrvr] fix build issue: undefined reference to `NS8390p_init'
>
> Signed-off-by: Alan 'pass the paper bags' Cox <[email protected]>
> Signed-off-by: Jeff Garzik <[email protected]>

Thanks, closed.

Rafael

2008-08-30 21:49:21

by Alan Jenkins

[permalink] [raw]
Subject: Re: [Bug #11237] corrupt PMD after resume

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11237
> Subject : corrupt PMD after resume
> Submitter : Alan Jenkins <[email protected]>
> Date : 2008-08-02 9:51 (29 days old)
> References : http://marc.info/?l=linux-kernel&m=121767073424952&w=4
> Handled-By : Hugh Dickins <[email protected]>
> Jeremy Fitzhardinge <[email protected]>
>
>

This has been isolated (to disparate buggy BIOSes), patches written and
tested. It's more policy decisions now; mainly whether the workaround
(which wastes 64k) should be applied by default. So I think you should add

Patch :
http://marc.info/?l=linux-kernel&m=122001615314700&w=2

Regards
Alan

2008-08-30 22:01:17

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: [Bug #11237] corrupt PMD after resume

On Saturday, 30 of August 2008, Alan Jenkins wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.26. Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11237
> > Subject : corrupt PMD after resume
> > Submitter : Alan Jenkins <[email protected]>
> > Date : 2008-08-02 9:51 (29 days old)
> > References : http://marc.info/?l=linux-kernel&m=121767073424952&w=4
> > Handled-By : Hugh Dickins <[email protected]>
> > Jeremy Fitzhardinge <[email protected]>
> >
> >
>
> This has been isolated (to disparate buggy BIOSes), patches written and
> tested. It's more policy decisions now; mainly whether the workaround
> (which wastes 64k) should be applied by default. So I think you should add
>
> Patch :
> http://marc.info/?l=linux-kernel&m=122001615314700&w=2

Done.

Thanks,
Rafael

2008-08-30 22:21:17

by David Greaves

[permalink] [raw]
Subject: Re: [Bug #11460] 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt

Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11460
> Subject : 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt
> Submitter : David Greaves <[email protected]>
> Date : 2008-08-30 04:07 (1 days old)

Yes.

I'm trying to bisect it but came across a bug/problem in git doing bisects.
(see message subject "setlocalversion wasn't producing git labels for bisect")

David

2008-08-31 01:21:52

by Gene Heskett

[permalink] [raw]
Subject: Re: [Bug #11465] Linux-2.6.27-rc5, drm errors in log

On Saturday 30 August 2008, Rafael J. Wysocki wrote:
>This message has been generated automatically as a part of a report
>of recent regressions.
>
>The following bug entry is on the current list of known regressions
>from 2.6.26. Please verify if it still should be listed and let me know
>(either way).
>
>
>Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11465
>Subject : Linux-2.6.27-rc5, drm errors in log
>Submitter : Gene Heskett <[email protected]>
>Date : 2008-08-30 18:52 (1 days old)
>References : http://marc.info/?l=linux-kernel&m=122012238925775&w=4
>Handled-By : Arjan van de Ven <[email protected]>

Yes, is still valid as of 08/30/08 21:21 ESDT.

--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Should I start with the time I SWITCHED personalities with a BEATNIK
hair stylist or my failure to refer five TEENAGERS to a good OCULIST?

Subject: Re: [Bug #11464] BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!

Em Saturday 30 August 2008 16:50:30 Rafael J. Wysocki escreveu:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11464
> Subject : BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!
> Submitter : Thomas Backlund <[email protected]>
> Date : 2008-08-30 12:46 (1 days old)
> References : http://marc.info/?l=linux-kernel&m=122010171130384&w=4

Hi, you can close/remove this as it's not a regression on vanilla 2.6.27-rc5,
it only happens if you use tomoyo linux + apparmor patches that is not on
mainline, sorry for any trouble this may have caused.

--
[]'s
Herton

2008-08-31 07:38:45

by Martin Michlmayr

[permalink] [raw]
Subject: Re: [Bug #11334] myri10ge: use ioremap_wc: compilation failure on ARM

* Rafael J. Wysocki <[email protected]> [2008-08-30 21:50]:
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).

It's still there.
--
Martin Michlmayr
http://www.cyrius.com/

2008-08-31 09:14:29

by Tobias Diedrich

[permalink] [raw]
Subject: Re: [Bug #11358] net: forcedeth call restore mac addr in nv_shutdown path

Rafael J. Wysocki wrote:
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11358
> Subject : net: forcedeth call restore mac addr in nv_shutdown path
> Submitter : Yinghai Lu <[email protected]>
> Date : 2008-08-17 3:30 (14 days old)
> References : http://marc.info/?l=linux-kernel&m=121894389018584&w=4
> Handled-By : Yinghai Lu <[email protected]>
> Patch : http://marc.info/?l=linux-kernel&m=121894389018584&w=4

I got around to try kexec and found that on 2.6.27-rc5, without
Yinghai Lu's patch, when I kexec while forecdeth is loaded I get the
following when the new kernel tries to load the module (on my Asus
M2N-SLI Deluxe):

|Aug 31 10:10:42 melchior kernel: [ 10.578053] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
|Aug 31 10:10:42 melchior kernel: [ 10.578256] forcedeth 0000:00:08.0: BAR 0: error updating (0xfe02a000 != 0x000000)
|Aug 31 10:10:42 melchior kernel: [ 10.580901] forcedeth 0000:00:08.0: enabling device (0000 -> 0003)
|Aug 31 10:10:42 melchior kernel: [ 10.581405] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
|Aug 31 10:10:42 melchior kernel: [ 10.581509] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
|Aug 31 10:10:42 melchior kernel: [ 10.581699] forcedeth 0000:00:08.0: setting latency timer to 64
|Aug 31 10:10:42 melchior kernel: [ 10.581748] forcedeth 0000:00:08.0: Invalid Mac address detected: ff:ff:ff:ff:ff:ff
|Aug 31 10:10:42 melchior kernel: [ 10.581936] forcedeth 0000:00:08.0: Please complain to your hardware vendor. Switching to a random MAC.
|Aug 31 10:10:42 melchior kernel: [ 15.981960] forcedeth 0000:00:08.0: open: Could not find a valid PHY.
|Aug 31 10:10:42 melchior kernel: [ 15.982131] forcedeth 0000:00:08.0: PCI INT A disabled
|Aug 31 10:10:42 melchior kernel: [ 15.982283] forcedeth: probe of 0000:00:08.0 failed with error -12
|Aug 31 10:10:42 melchior kernel: [ 16.017545] forcedeth 0000:00:09.0: BAR 0: error updating (0xfe027000 != 0x000000)
|Aug 31 10:10:42 melchior kernel: [ 16.017766] forcedeth 0000:00:09.0: enabling device (0000 -> 0003)
|Aug 31 10:10:42 melchior kernel: [ 16.018720] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
|Aug 31 10:10:42 melchior kernel: [ 16.018839] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
|Aug 31 10:10:42 melchior kernel: [ 16.019050] forcedeth 0000:00:09.0: setting latency timer to 64
|Aug 31 10:10:42 melchior kernel: [ 16.019129] forcedeth 0000:00:09.0: Invalid Mac address detected: ff:ff:ff:ff:ff:ff
|Aug 31 10:10:42 melchior kernel: [ 16.019339] forcedeth 0000:00:09.0: Please complain to your hardware vendor. Switching to a random MAC.
|Aug 31 10:10:42 melchior kernel: [ 21.399400] forcedeth 0000:00:09.0: open: Could not find a valid PHY.
|Aug 31 10:10:42 melchior kernel: [ 21.399572] forcedeth 0000:00:09.0: PCI INT A disabled
|Aug 31 10:10:42 melchior kernel: [ 21.399723] forcedeth: probe of 0000:00:09.0 failed with error -12

If I rmmod forcedeth before kexec, it loads fine later.
This is with MSI enabled:
| CPU0
| 0: 99 IO-APIC-edge timer
| 1: 2 IO-APIC-edge i8042
| 7: 1 IO-APIC-edge
| 8: 1 IO-APIC-edge rtc
| 9: 0 IO-APIC-fasteoi acpi
| 12: 3 IO-APIC-edge i8042
| 14: 53 IO-APIC-edge pata_amd
| 15: 0 IO-APIC-edge pata_amd
| 16: 76975 IO-APIC-fasteoi ahci, radeon@pci:0000:02:00.0
| 18: 0 IO-APIC-fasteoi EMU10K1
| 20: 6 IO-APIC-fasteoi ehci_hcd:usb1
| 21: 54 IO-APIC-fasteoi sata_nv
| 22: 0 IO-APIC-fasteoi sata_nv
| 23: 11230 IO-APIC-fasteoi sata_nv, ohci_hcd:usb2
|284: 81038 PCI-MSI-edge eth1
|285: 74728 PCI-MSI-edge eth0
|NMI: 0 Non-maskable interrupts
|LOC: 29209 Local timer interrupts
|TRM: 0 Thermal event interrupts
|THR: 0 Threshold APIC interrupts
|SPU: 0 Spurious interrupts
|ERR: 1

Maybe also calling nv_restore_phy() and/or pci_release_regions() in
the shutdown hook would help.

TODO:
Try with the patch, maybe try nv_restore_phy, test if WOL is
affected by the patch.

HTH,

--
Tobias PGP: http://9ac7e0bc.uguu.de
このメールは十割再利用されたビットで作られています。

2008-08-31 10:40:17

by Frans Pop

[permalink] [raw]
Subject: Re: [Bug #11398] hda_intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

On Saturday 30 August 2008, Rafael J. Wysocki wrote:
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11398
> Subject : hda_intel: IRQ timing workaround is activated for card #0.
> Suggest a bigger bdl_pos_adj.
> Submitter : Frans Pop <[email protected]>
> Date : 2008-08-21 17:17 (10 days old)

Still there.

2008-08-31 11:52:28

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: [Bug #11464] BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!

On Sunday, 31 of August 2008, Herton Ronaldo Krzesinski wrote:
> Em Saturday 30 August 2008 16:50:30 Rafael J. Wysocki escreveu:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.26. Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11464
> > Subject : BUG: kernel-2.6.27-rc5: soft lockup - CPU#X stuck for 61s!
> > Submitter : Thomas Backlund <[email protected]>
> > Date : 2008-08-30 12:46 (1 days old)
> > References : http://marc.info/?l=linux-kernel&m=122010171130384&w=4
>
> Hi, you can close/remove this as it's not a regression on vanilla 2.6.27-rc5,
> it only happens if you use tomoyo linux + apparmor patches that is not on
> mainline, sorry for any trouble this may have caused.

Thanks, closed.

Rafael

2008-08-31 13:09:24

by Tobias Diedrich

[permalink] [raw]
Subject: Re: [Bug #11358] net: forcedeth call restore mac addr in nv_shutdown path

Tobias Diedrich wrote:
> I got around to try kexec and found that on 2.6.27-rc5, without
> Yinghai Lu's patch, when I kexec while forecdeth is loaded I get the
> following when the new kernel tries to load the module (on my Asus
> M2N-SLI Deluxe):
>
> |Aug 31 10:10:42 melchior kernel: [ 10.578053] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
> |Aug 31 10:10:42 melchior kernel: [ 10.578256] forcedeth 0000:00:08.0: BAR 0: error updating (0xfe02a000 != 0x000000)
> |Aug 31 10:10:42 melchior kernel: [ 10.580901] forcedeth 0000:00:08.0: enabling device (0000 -> 0003)
> |Aug 31 10:10:42 melchior kernel: [ 10.581405] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
> |Aug 31 10:10:42 melchior kernel: [ 10.581509] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
> |Aug 31 10:10:42 melchior kernel: [ 10.581699] forcedeth 0000:00:08.0: setting latency timer to 64
> |Aug 31 10:10:42 melchior kernel: [ 10.581748] forcedeth 0000:00:08.0: Invalid Mac address detected: ff:ff:ff:ff:ff:ff
> |Aug 31 10:10:42 melchior kernel: [ 10.581936] forcedeth 0000:00:08.0: Please complain to your hardware vendor. Switching to a random MAC.
> |Aug 31 10:10:42 melchior kernel: [ 15.981960] forcedeth 0000:00:08.0: open: Could not find a valid PHY.
> |Aug 31 10:10:42 melchior kernel: [ 15.982131] forcedeth 0000:00:08.0: PCI INT A disabled
> |Aug 31 10:10:42 melchior kernel: [ 15.982283] forcedeth: probe of 0000:00:08.0 failed with error -12
> |Aug 31 10:10:42 melchior kernel: [ 16.017545] forcedeth 0000:00:09.0: BAR 0: error updating (0xfe027000 != 0x000000)
> |Aug 31 10:10:42 melchior kernel: [ 16.017766] forcedeth 0000:00:09.0: enabling device (0000 -> 0003)
> |Aug 31 10:10:42 melchior kernel: [ 16.018720] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
> |Aug 31 10:10:42 melchior kernel: [ 16.018839] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
> |Aug 31 10:10:42 melchior kernel: [ 16.019050] forcedeth 0000:00:09.0: setting latency timer to 64
> |Aug 31 10:10:42 melchior kernel: [ 16.019129] forcedeth 0000:00:09.0: Invalid Mac address detected: ff:ff:ff:ff:ff:ff
> |Aug 31 10:10:42 melchior kernel: [ 16.019339] forcedeth 0000:00:09.0: Please complain to your hardware vendor. Switching to a random MAC.
> |Aug 31 10:10:42 melchior kernel: [ 21.399400] forcedeth 0000:00:09.0: open: Could not find a valid PHY.
> |Aug 31 10:10:42 melchior kernel: [ 21.399572] forcedeth 0000:00:09.0: PCI INT A disabled
> |Aug 31 10:10:42 melchior kernel: [ 21.399723] forcedeth: probe of 0000:00:09.0 failed with error -12
>
> If I rmmod forcedeth before kexec, it loads fine later.
[...]
> Maybe also calling nv_restore_phy() and/or pci_release_regions() in
> the shutdown hook would help.
>
> TODO:
> Try with the patch, maybe try nv_restore_phy, test if WOL is
> affected by the patch.

I just tried with the patch and both options above in the shutdown
path and the kexec'd kernel still had the same problems as above.

Interestingly the message comes from drivers/pci/setup-res.c, where
it updates the BAR register and reads it back to make sure it was
updated and somehow reads back zeroes?

I wonder what's going on there, that should never happen AFAIK...
Maybe the pci device was not properly reenabled, but OTOH when I
just rmmod before kexec it seems to work and nv_remove also calls
pci_disable_device()...

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc5
# Sat Aug 30 09:46:25 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=y
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
CONFIG_IP6_NF_QUEUE=y
# CONFIG_IP6_NF_IPTABLES is not set

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=932
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=0
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_TRACING=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_MMIOTRACE_HOOKS=y
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

--
Tobias PGP: http://9ac7e0bc.uguu.de
このメールは十割再利用されたビットで作られています。

2008-08-31 16:29:50

by John W. Linville

[permalink] [raw]
Subject: Re: [Bug #11357] Can not boot up with zd1211rw USB-Wlan Stick

On Sat, Aug 30, 2008 at 09:50:19PM +0200, Rafael J. Wysocki wrote:
> This message has been generated automatically as a part of a report
> of recent regressions.
>
> The following bug entry is on the current list of known regressions
> from 2.6.26. Please verify if it still should be listed and let me know
> (either way).
>
>
> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11357
> Subject : Can not boot up with zd1211rw USB-Wlan Stick
> Submitter : uwe <[email protected]>
> Date : 2008-08-16 14:17 (15 days old)

This one could benefit from being looked at by an FTRACE person...

John

2008-08-31 18:02:57

by Yinghai Lu

[permalink] [raw]
Subject: Re: [Bug #11358] net: forcedeth call restore mac addr in nv_shutdown path

On Sun, Aug 31, 2008 at 6:09 AM, Tobias Diedrich
<[email protected]> wrote:
> Tobias Diedrich wrote:
>> I got around to try kexec and found that on 2.6.27-rc5, without
>> Yinghai Lu's patch, when I kexec while forecdeth is loaded I get the
>> following when the new kernel tries to load the module (on my Asus
>> M2N-SLI Deluxe):
>>
>> |Aug 31 10:10:42 melchior kernel: [ 10.578053] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>> |Aug 31 10:10:42 melchior kernel: [ 10.578256] forcedeth 0000:00:08.0: BAR 0: error updating (0xfe02a000 != 0x000000)
>> |Aug 31 10:10:42 melchior kernel: [ 10.580901] forcedeth 0000:00:08.0: enabling device (0000 -> 0003)
>> |Aug 31 10:10:42 melchior kernel: [ 10.581405] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>> |Aug 31 10:10:42 melchior kernel: [ 10.581509] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>> |Aug 31 10:10:42 melchior kernel: [ 10.581699] forcedeth 0000:00:08.0: setting latency timer to 64
>> |Aug 31 10:10:42 melchior kernel: [ 10.581748] forcedeth 0000:00:08.0: Invalid Mac address detected: ff:ff:ff:ff:ff:ff
>> |Aug 31 10:10:42 melchior kernel: [ 10.581936] forcedeth 0000:00:08.0: Please complain to your hardware vendor. Switching to a random MAC.
>> |Aug 31 10:10:42 melchior kernel: [ 15.981960] forcedeth 0000:00:08.0: open: Could not find a valid PHY.
>> |Aug 31 10:10:42 melchior kernel: [ 15.982131] forcedeth 0000:00:08.0: PCI INT A disabled
>> |Aug 31 10:10:42 melchior kernel: [ 15.982283] forcedeth: probe of 0000:00:08.0 failed with error -12
>> |Aug 31 10:10:42 melchior kernel: [ 16.017545] forcedeth 0000:00:09.0: BAR 0: error updating (0xfe027000 != 0x000000)
>> |Aug 31 10:10:42 melchior kernel: [ 16.017766] forcedeth 0000:00:09.0: enabling device (0000 -> 0003)
>> |Aug 31 10:10:42 melchior kernel: [ 16.018720] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
>> |Aug 31 10:10:42 melchior kernel: [ 16.018839] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
>> |Aug 31 10:10:42 melchior kernel: [ 16.019050] forcedeth 0000:00:09.0: setting latency timer to 64
>> |Aug 31 10:10:42 melchior kernel: [ 16.019129] forcedeth 0000:00:09.0: Invalid Mac address detected: ff:ff:ff:ff:ff:ff
>> |Aug 31 10:10:42 melchior kernel: [ 16.019339] forcedeth 0000:00:09.0: Please complain to your hardware vendor. Switching to a random MAC.
>> |Aug 31 10:10:42 melchior kernel: [ 21.399400] forcedeth 0000:00:09.0: open: Could not find a valid PHY.
>> |Aug 31 10:10:42 melchior kernel: [ 21.399572] forcedeth 0000:00:09.0: PCI INT A disabled
>> |Aug 31 10:10:42 melchior kernel: [ 21.399723] forcedeth: probe of 0000:00:09.0 failed with error -12
>>
>> If I rmmod forcedeth before kexec, it loads fine later.
> [...]
>> Maybe also calling nv_restore_phy() and/or pci_release_regions() in
>> the shutdown hook would help.
>>
>> TODO:
>> Try with the patch, maybe try nv_restore_phy, test if WOL is
>> affected by the patch.
>
> I just tried with the patch and both options above in the shutdown
> path and the kexec'd kernel still had the same problems as above.
>
> Interestingly the message comes from drivers/pci/setup-res.c, where
> it updates the BAR register and reads it back to make sure it was
> updated and somehow reads back zeroes?
>
> I wonder what's going on there, that should never happen AFAIK...
> Maybe the pci device was not properly reenabled, but OTOH when I
> just rmmod before kexec it seems to work and nv_remove also calls
> pci_disable_device()...

in addition to this patch, you may need another patch from Rafael...,
that one fix the MSI...etc,

YH

2008-08-31 19:43:21

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: [Bug #11357] Can not boot up with zd1211rw USB-Wlan Stick

On Sunday, 31 of August 2008, John W. Linville wrote:
> On Sat, Aug 30, 2008 at 09:50:19PM +0200, Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.26. Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11357
> > Subject : Can not boot up with zd1211rw USB-Wlan Stick
> > Submitter : uwe <[email protected]>
> > Date : 2008-08-16 14:17 (15 days old)
>
> This one could benefit from being looked at by an FTRACE person...

Why don't we CC him, then?

Rafael

2008-09-01 02:55:24

by NeilBrown

[permalink] [raw]
Subject: Re: [Bug #11460] 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt

On Saturday August 30, [email protected] wrote:
> Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of recent regressions.
> >
> > The following bug entry is on the current list of known regressions
> > from 2.6.26. Please verify if it still should be listed and let me know
> > (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=11460
> > Subject : 2.6.27-rc3 to -rc4 regression: init 0 hangs in halt
> > Submitter : David Greaves <[email protected]>
> > Date : 2008-08-30 04:07 (1 days old)
>
> Yes.
>
> I'm trying to bisect it but came across a bug/problem in git doing bisects.
> (see message subject "setlocalversion wasn't producing git labels for bisect")

Hi David.

Could you please try this patch?

Thanks,
NeilBrown


>From 271f5a9b8f8ae0db95de72779d115c9d0b9d3cc5 Mon Sep 17 00:00:00 2001
From: NeilBrown <[email protected]>
Date: Mon, 1 Sep 2008 12:32:52 +1000
Subject: [PATCH] Remove invalidate_partition call from do_md_stop.

When stopping an md array, or just switching to read-only, we
currently call invalidate_partition while holding the mddev lock.
The main reason for this is probably to ensure all dirty buffers
are flushed (invalidate_partition calls fsync_bdev).

However if any dirty buffers are found, it will almost certainly cause
a deadlock as starting writeout will require an update to the
superblock, and performing that updates requires taking the mddev
lock - which is already held.

This deadlock can be demonstrated by running "reboot -f -n" with
a root filesystem on md/raid, and some dirty buffers in memory.

All other calls to stop an array should already happen after a flush.
The normal sequence is to stop using the array (e.g. umount) which
will cause __blkdev_put to call sync_blockdev. Then open the
array and issue the STOP_ARRAY ioctl while the buffers are all still
clean.

So this invalidate_partition is normally a no-op, except for one case
where it will cause a deadlock.

So remove it.

This patch possibly addresses the regression recored in
http://bugzilla.kernel.org/show_bug.cgi?id=11460
and
http://bugzilla.kernel.org/show_bug.cgi?id=11452

though it isn't yet clear how it ever worked.


Signed-off-by: NeilBrown <[email protected]>
---
drivers/md/md.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8cfadc5..4790c83 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3841,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)

del_timer_sync(&mddev->safemode_timer);

- invalidate_partition(disk, 0);
-
switch(mode) {
case 1: /* readonly */
err = -ENXIO;
--
1.5.6.5