This is the patch stack waiting for 2.6.28 to open. The patches start with
various queued bug fixes then move on to tackle the first stage of making the
tty layer sane. These patches have been in linux-next.
The main thrust is to begin using krefs and refcounts to kill races and make
the locking saner. At this point we still have BKL users but will hopefully
change bit by bit.
Alan
---
Adrian Bunk (1):
coldfire: scheduled SERIAL_COLDFIRE removal
Akinobu Mita (1):
ip2: avoid add_timer with pending timer
Alan Cox (43):
ftdi: A few errors are err() that should be debug which causes much spewage
applicom: Fix an unchecked user ioctl range and an error return
hso: net driver using tty without locking
tty: Minor tidyups and document fixes for n_tty
tty: Remove lots of NULL checks
tty: fix up gigaset a bit
tty: some ICANON magic is in the wrong places
tty: simplify ktermios allocation
pty: simplify unix98 allocation
pty: Fix allocation failure double free
pty: Coding style and polish
tty: extract the pty init time special cases
tty: Finish fixing up the init_dev interface to use ERR_PTR
tty: More driver operations
tty: kref the tty driver object
tty: Clean up the tty_init_dev changes further
tty: Remove more special casing and out of place code
tty: shutdown method
vt: remove bogus lock dropping
pty: If the administrator creates a device for a ptmx slave we should not error
tty: Fix abusers of current->sighand->tty
tty: Redo current tty locking
tty: the vhangup syscall is racy
mxser: Switch to kref tty
stallion: Use krefs
tty: kref usage for isicom and moxa
tty: usb-serial krefs
tty: Move tty_write_message out of kernel/printk
tty: Make get_current_tty use a kref
tty: compare the tty winsize
tty: Termios locking - sort out real_tty confusions and lock reads
tty: Add termiox
tty: ipw need reworking
tty: Cris has a nice RS485 ioctl so we should steal it
tty: use krefs to protect driver module counts
tty: Add a kref count
pps: Reserve a line discipline number for PPS
tty: Split tty_port into its own file
tty: split the buffering from tty_io
uml: small cleanups and note bugs to be dealt with by uml authors...
tty: move tioclinux from a special case
8250: Remove NR_IRQ usage
epca: call tty_port_init
Andrew Morton (1):
serial-make-uart_ports-ioport-unsigned-long-fix
David Miller (2):
serial: allow 8250 to be used on sparc
serial: Make uart_port's ioport "unsigned long".
David S. Miller (1):
serial: fix device name reporting when minor space is shared between drivers
Graf Yang (1):
Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UART
Jason Wessel (2):
usb: fix pl2303 initialization
tty: tty_io.c shadows sparse fix
Jiri Slaby (6):
Char: sx, fix io unmapping
Char: cyclades. remove bogus iomap
ip2, init/deinit cleanup
ip2, fix sparse warnings
ip2, cleanup globals
Char: merge ip2main and ip2base
Julia Lawall (2):
drivers/char/hvc_console.c: adjust call to put_tty_driver
drivers/serial/crisv10.c: add missing put_tty_driver
Mike Frysinger (3):
Blackfin Serial Driver: move common variables out of serial headers and into the serial driver
Blackfin Serial Driver: trim trailing whitespace -- no functional changes
Blackfin Serial Driver: use __initdata for data, not __init
Miloslav Trmac (1):
audit: Handle embedded NUL in TTY input auditing
Sonic Zhang (4):
Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in PIO mode
Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer.
Blackfin Serial Driver: Remove useless stop
Blackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports.
Stephen Rothwell (1):
tty: Fallout from tty-move-canon-specials
Sukadev Bhattiprolu (6):
Simplify devpts_pty_kill
Simplify devpts_pty_new()
Simplify devpts_get_tty()
Add an instance parameter devpts interfaces
Move tty lookup/reopen to caller
tty: Move parts of tty_init_dev into new functions
\\\"Will Newton\\\ (1):
8250: remove a few inlines of dubious value
Documentation/feature-removal-schedule.txt | 8
arch/blackfin/kernel/bfin_dma_5xx.c | 13
.../mach-bf527/include/mach/bfin_serial_5xx.h | 6
.../mach-bf533/include/mach/bfin_serial_5xx.h | 4
.../mach-bf537/include/mach/bfin_serial_5xx.h | 6
.../mach-bf548/include/mach/bfin_serial_5xx.h | 6
.../mach-bf561/include/mach/bfin_serial_5xx.h | 4
arch/sparc/include/asm/serial.h | 6
arch/um/drivers/line.c | 2
drivers/bluetooth/hci_ldisc.c | 2
drivers/char/Kconfig | 4
drivers/char/Makefile | 2
drivers/char/amiserial.c | 6
drivers/char/applicom.c | 6
drivers/char/cyclades.c | 21
drivers/char/epca.c | 5
drivers/char/generic_serial.c | 21
drivers/char/hvc_console.c | 4
drivers/char/ip2/Makefile | 2
drivers/char/ip2/i2ellis.c | 32
drivers/char/ip2/i2ellis.h | 2
drivers/char/ip2/ip2base.c | 108 -
drivers/char/ip2/ip2main.c | 550 +++---
drivers/char/isicom.c | 61 -
drivers/char/istallion.c | 113 +
drivers/char/moxa.c | 61 -
drivers/char/mxser.c | 193 +-
drivers/char/n_hdlc.c | 2
drivers/char/n_r3964.c | 9
drivers/char/n_tty.c | 99 +
drivers/char/pcmcia/ipwireless/tty.c | 19
drivers/char/pty.c | 335 +++
drivers/char/stallion.c | 139 +
drivers/char/sx.c | 4
drivers/char/tty_audit.c | 2
drivers/char/tty_buffer.c | 511 +++++
drivers/char/tty_io.c | 1380 ++++----------
drivers/char/tty_ioctl.c | 212 ++
drivers/char/tty_port.c | 96 +
drivers/char/vt.c | 84 -
drivers/char/vt_ioctl.c | 2
drivers/isdn/capi/capi.c | 2
drivers/isdn/gigaset/ser-gigaset.c | 27
drivers/net/usb/hso.c | 46
drivers/net/wan/Kconfig | 2
drivers/s390/char/fs3270.c | 3
drivers/serial/68328serial.c | 11
drivers/serial/8250.c | 123 +
drivers/serial/Kconfig | 17
drivers/serial/Makefile | 16
drivers/serial/bfin_5xx.c | 123 +
drivers/serial/crisv10.c | 5
drivers/serial/mcfserial.c | 1965 --------------------
drivers/serial/mcfserial.h | 74 -
drivers/serial/serial_core.c | 12
drivers/usb/serial/aircable.c | 15
drivers/usb/serial/belkin_sa.c | 3
drivers/usb/serial/console.c | 8
drivers/usb/serial/cyberjack.c | 3
drivers/usb/serial/cypress_m8.c | 5
drivers/usb/serial/digi_acceleport.c | 19
drivers/usb/serial/empeg.c | 8
drivers/usb/serial/ftdi_sio.c | 25
drivers/usb/serial/garmin_gps.c | 3
drivers/usb/serial/generic.c | 3
drivers/usb/serial/io_edgeport.c | 43
drivers/usb/serial/io_ti.c | 26
drivers/usb/serial/ipaq.c | 3
drivers/usb/serial/ipw.c | 3
drivers/usb/serial/ir-usb.c | 3
drivers/usb/serial/iuu_phoenix.c | 3
drivers/usb/serial/keyspan.c | 77 -
drivers/usb/serial/keyspan_pda.c | 16
drivers/usb/serial/kl5kusb105.c | 3
drivers/usb/serial/kobil_sct.c | 3
drivers/usb/serial/mct_u232.c | 6
drivers/usb/serial/mos7720.c | 36
drivers/usb/serial/mos7840.c | 7
drivers/usb/serial/navman.c | 3
drivers/usb/serial/omninet.c | 10
drivers/usb/serial/option.c | 18
drivers/usb/serial/oti6858.c | 3
drivers/usb/serial/pl2303.c | 15
drivers/usb/serial/safe_serial.c | 11
drivers/usb/serial/sierra.c | 16
drivers/usb/serial/spcp8x5.c | 3
drivers/usb/serial/ti_usb_3410_5052.c | 44
drivers/usb/serial/usb-serial.c | 24
drivers/usb/serial/visor.c | 18
drivers/usb/serial/whiteheat.c | 8
fs/devpts/inode.c | 66 -
fs/dquot.c | 6
fs/open.c | 3
include/asm-x86/ioctls.h | 6
include/linux/devpts_fs.h | 31
include/linux/serial.h | 16
include/linux/serial_core.h | 2
include/linux/termios.h | 15
include/linux/tty.h | 45
include/linux/tty_driver.h | 56 +
include/linux/vt_kern.h | 2
kernel/acct.c | 2
kernel/auditsc.c | 9
kernel/fork.c | 5
kernel/printk.c | 16
kernel/sys.c | 4
security/selinux/hooks.c | 3
107 files changed, 2948 insertions(+), 4401 deletions(-)
create mode 100644 arch/sparc/include/asm/serial.h
delete mode 100644 drivers/char/ip2/ip2base.c
create mode 100644 drivers/char/tty_buffer.c
create mode 100644 drivers/char/tty_port.c
delete mode 100644 drivers/serial/mcfserial.c
delete mode 100644 drivers/serial/mcfserial.h
--
Signature
From: Julia Lawall <[email protected]>
alloc_tty_driver is called at the beginning of the function containing the
lines of code shown in the patch. Thus, put_tty_driver is needed before
returning in the error handling code.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@nr exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@
x = alloc_tty_driver@p1(...)
...
if (x == NULL) S
... when != E = x
when != put_tty_driver(x)
when != goto l;
(
return \(0\|x\);
|
return@p3 ...;
)
@script:python@
p1 << nr.p1;
p3 << nr.p3;
@@
print "%s: call on line %s not freed or saved before return on line %s" % (p1[0].file,p1[0].line,p3[0].line)
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/crisv10.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index bf94a77..a467c77 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -4419,6 +4419,7 @@ rs_init(void)
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
+ put_tty_driver(driver);
return -EBUSY;
}
#endif
@@ -4427,6 +4428,7 @@ rs_init(void)
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
+ put_tty_driver(driver);
return -EBUSY;
}
#endif
From: Julia Lawall <[email protected]>
The call to put_tty_driver is out of place and is applied to the wrong
argument.
The function enclosing the patched code calls alloc_tty_driver and stores
the result in drv. Subsequently, there are two occurrences of error
handling code, one making a goto to put_tty and one making a goto to
stop_thread. At the point of the first one the assignment hvc_driver = drv
has not yet been executed, and from inspecting the rest of the file it
seems that hvc_driver would be NULL. Thus the current call to
put_tty_driver is useless, and one applied to drv is needed. The goto
stop_thread is in the error handling code for a call to
tty_register_driver, but the error cases in tty_register_driver do not free
its argument, so it should be done here. Thus, I have moved the put_tty
label after the stop_thread label, so that put_tty_driver is called in both
cases.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@
x = alloc_tty_driver@p1(...)
...
if (x == NULL) S
... when != E = x
when != put_tty_driver(x)
goto@p2 l;
... when != E = x
when != f(...,x,...)
when any
(
return \(0\|x\);
|
return@p3 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
p3 << r.p3;
@@
print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/hvc_console.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index fd64137..ec7aded 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -819,11 +819,11 @@ static int hvc_init(void)
hvc_driver = drv;
return 0;
-put_tty:
- put_tty_driver(hvc_driver);
stop_thread:
kthread_stop(hvc_task);
hvc_task = NULL;
+put_tty:
+ put_tty_driver(drv);
out:
return err;
}
From: Adrian Bunk <[email protected]>
This patch contains the scheduled removal of the obsolete
SERIAL_COLDFIRE driver.
Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
Documentation/feature-removal-schedule.txt | 8
drivers/serial/Kconfig | 16
drivers/serial/Makefile | 1
drivers/serial/mcfserial.c | 1965 ----------------------------
drivers/serial/mcfserial.h | 74 -
5 files changed, 2 insertions(+), 2062 deletions(-)
delete mode 100644 drivers/serial/mcfserial.c
delete mode 100644 drivers/serial/mcfserial.h
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 83c88ca..e5c3f9d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -266,14 +266,6 @@ Who: Glauber Costa <[email protected]>
---------------------------
-What: old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE)
-When: 2.6.28
-Why: This driver still uses the old interface and has been replaced
- by CONFIG_SERIAL_MCF.
-Who: Sebastian Siewior <[email protected]>
-
----------------------------
-
What: /sys/o2cb symlink
When: January 2010
Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 77cb342..0db2045 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -994,24 +994,12 @@ config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
depends on SERIAL_68328
-config SERIAL_COLDFIRE
- bool "ColdFire serial support (DEPRECATED)"
- depends on COLDFIRE
- help
- This driver supports the built-in serial ports of the Motorola ColdFire
- family of CPUs.
- This driver is deprecated because it supports only the old interface
- for serial drivers and features like magic keys are not working.
- Please switch to the new style driver because this driver will be
- removed soon.
-
config SERIAL_MCF
- bool "Coldfire serial support (new style driver)"
+ bool "Coldfire serial support"
depends on COLDFIRE
select SERIAL_CORE
help
- This new serial driver supports the Freescale Coldfire serial ports
- using the new serial driver subsystem.
+ This serial driver supports the Freescale Coldfire serial ports.
config SERIAL_MCF_BAUDRATE
int "Default baudrate for Coldfire serial ports"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7e7383e..1462eb3 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
-obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
deleted file mode 100644
index fbe3835..0000000
--- a/drivers/serial/mcfserial.c
+++ /dev/null
@@ -1,1965 +0,0 @@
-#warning This driver is deprecated. Check Kconfig for details.
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (C) 1999-2003 Greg Ungerer <[email protected]>
- * Copyright (c) 2000-2001 Lineo, Inc. <http://www.lineo.com>
- * Copyright (C) 2001-2002 SnapGear Inc. <http://www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller ([email protected])
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <[email protected]>
- *
- * Changes:
- * 08/07/2003 Daniele Bellucci <[email protected]>
- * some cleanups in mcfrs_write.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/nettel.h>
-#include <asm/uaccess.h>
-#include "mcfserial.h"
-
-struct timer_list mcfrs_timer_struct;
-
-/*
- * Default console baud rate, we use this as the default
- * for all ports so init can just open /dev/console and
- * keep going. Perhaps one day the cflag settings for the
- * console can be used instead.
- */
-#if defined(CONFIG_HW_FEITH)
-#define CONSOLE_BAUD_RATE 38400
-#define DEFAULT_CBAUD B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
- defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
- defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET)
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
-#ifndef CONSOLE_BAUD_RATE
-#define CONSOLE_BAUD_RATE 9600
-#define DEFAULT_CBAUD B9600
-#endif
-
-int mcfrs_console_inited = 0;
-int mcfrs_console_port = -1;
-int mcfrs_console_baud = CONSOLE_BAUD_RATE;
-int mcfrs_console_cbaud = DEFAULT_CBAUD;
-
-/*
- * Driver data structures.
- */
-static struct tty_driver *mcfrs_serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging...
- */
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
-#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
-#else
-#define IRQBASE 73
-#endif
-
-/*
- * Configuration table, UARTs to look for at startup.
- */
-static struct mcf_serial mcfrs_table[] = {
- { /* ttyS0 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1),
- .irq = IRQBASE,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#ifdef MCFUART_BASE2
- { /* ttyS1 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
- .irq = IRQBASE+1,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE3
- { /* ttyS2 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
- .irq = IRQBASE+2,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE4
- { /* ttyS3 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
- .irq = IRQBASE+3,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-};
-
-
-#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial))
-
-/*
- * This is used to figure out the divisor speeds and the timeouts.
- */
-static int mcfrs_baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
-};
-#define MCFRS_BAUD_TABLE_SIZE \
- (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- * Magic system request keys. Used for debugging...
- */
-extern int magic_sysrq_key(int ch);
-#endif
-
-
-/*
- * Forware declarations...
- */
-static void mcfrs_change_speed(struct mcf_serial *info);
-static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-static inline int serial_paranoia_check(struct mcf_serial *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char badmagic[] =
- "MCFRS(warning): bad magic number for serial struct %s in %s\n";
- static const char badinfo[] =
- "MCFRS(warning): null mcf_serial for %s in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * Sets or clears DTR and RTS on the requested line.
- */
-static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
-#if 0
- printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
- __FILE__, __LINE__, info, dtr, rts);
-#endif
-
- local_irq_save(flags);
- if (dtr >= 0) {
-#ifdef MCFPP_DTR0
- if (info->line)
- mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
- else
- mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
-#endif
- }
- if (rts >= 0) {
- uartp = info->addr;
- if (rts) {
- info->sigs |= TIOCM_RTS;
- uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
- } else {
- info->sigs &= ~TIOCM_RTS;
- uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
- }
- }
- local_irq_restore(flags);
- return;
-}
-
-/*
- * Gets values of serial signals.
- */
-static int mcfrs_getsignals(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int sigs;
-#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
- unsigned short ppdata;
-#endif
-
-#if 0
- printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
-#endif
-
- local_irq_save(flags);
- uartp = info->addr;
- sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
- sigs |= (info->sigs & TIOCM_RTS);
-
-#ifdef MCFPP_DCD0
-{
- unsigned int ppdata;
- ppdata = mcf_getppdata();
- if (info->line == 0) {
- sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
- } else if (info->line == 1) {
- sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
- }
-}
-#endif
-
- local_irq_restore(flags);
- return(sigs);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_stop() and mcfrs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void mcfrs_stop(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_stop"))
- return;
-
- local_irq_save(flags);
- uartp = info->addr;
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static void mcfrs_start(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_start"))
- return;
-
- local_irq_save(flags);
- if (info->xmit_cnt && info->xmit_buf) {
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines. All of the following
- * subroutines are declared as inline and are folded into
- * mcfrs_interrupt(). They were separated out for readability's sake.
- *
- * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off. People who may want to modify
- * mcfrs_interrupt() should try to keep the interrupt handler as fast as
- * possible. After you are done making modifications, it is not a bad
- * idea to do:
- *
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * - Ted Ts'o ([email protected]), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static inline void receive_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- struct tty_struct *tty = info->port.tty;
- unsigned char status, ch, flag;
-
- if (!tty)
- return;
-
- uartp = info->addr;
-
- while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
- ch = uartp[MCFUART_URB];
- info->stats.rx++;
-
-#ifdef CONFIG_MAGIC_SYSRQ
- if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
- if (magic_sysrq_key(ch))
- continue;
- }
-#endif
-
- flag = TTY_NORMAL;
- if (status & MCFUART_USR_RXERR) {
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
- if (status & MCFUART_USR_RXBREAK) {
- info->stats.rxbreak++;
- flag = TTY_BREAK;
- } else if (status & MCFUART_USR_RXPARITY) {
- info->stats.rxparity++;
- flag = TTY_PARITY;
- } else if (status & MCFUART_USR_RXOVERRUN) {
- info->stats.rxoverrun++;
- flag = TTY_OVERRUN;
- } else if (status & MCFUART_USR_RXFRAMING) {
- info->stats.rxframing++;
- flag = TTY_FRAME;
- }
- }
- tty_insert_flip_char(tty, ch, flag);
- }
- tty_schedule_flip(tty);
- return;
-}
-
-static inline void transmit_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
-
- uartp = info->addr;
-
- if (info->x_char) {
- /* Send special char - probably flow control */
- uartp[MCFUART_UTB] = info->x_char;
- info->x_char = 0;
- info->stats.tx++;
- }
-
- if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- return;
- }
-
- while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
- uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->stats.tx++;
- if (--info->xmit_cnt <= 0)
- break;
- }
-
- if (info->xmit_cnt < WAKEUP_CHARS)
- schedule_work(&info->tqueue);
- return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t mcfrs_interrupt(int irq, void *dev_id)
-{
- struct mcf_serial *info;
- unsigned char isr;
-
- info = &mcfrs_table[(irq - IRQBASE)];
- isr = info->addr[MCFUART_UISR] & info->imr;
-
- if (isr & MCFUART_UIR_RXREADY)
- receive_chars(info);
- if (isr & MCFUART_UIR_TXREADY)
- transmit_chars(info);
- return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static void mcfrs_offintr(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_wakeup(tty);
-}
-
-
-/*
- * Change of state on a DCD line.
- */
-void mcfrs_modem_change(struct mcf_serial *info, int dcd)
-{
- if (info->count == 0)
- return;
-
- if (info->flags & ASYNC_CHECK_CD) {
- if (dcd)
- wake_up_interruptible(&info->open_wait);
- else
- schedule_work(&info->tqueue_hangup);
- }
-}
-
-
-#ifdef MCFPP_DCD0
-
-unsigned short mcfrs_ppstatus;
-
-/*
- * This subroutine is called when the RS_TIMER goes off. It is used
- * to monitor the state of the DCD lines - since they have no edge
- * sensors and interrupt generators.
- */
-static void mcfrs_timer(void)
-{
- unsigned int ppstatus, dcdval, i;
-
- ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-
- if (ppstatus != mcfrs_ppstatus) {
- for (i = 0; (i < 2); i++) {
- dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
- if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
- mcfrs_modem_change(&mcfrs_table[i],
- ((ppstatus & dcdval) ? 0 : 1));
- }
- }
- }
- mcfrs_ppstatus = ppstatus;
-
- /* Re-arm timer */
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
-}
-
-#endif /* MCFPP_DCD0 */
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (scheduler tqueue) ->
- * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
- *
- */
-static void do_serial_hangup(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_hangup(tty);
-}
-
-static int startup(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (info->flags & ASYNC_INITIALIZED)
- return 0;
-
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!info->xmit_buf)
- return -ENOMEM;
- }
-
- local_irq_save(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
-#endif
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = info->addr;
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- mcfrs_setsignals(info, 1, 1);
-
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- /*
- * and set the speed of the serial port
- */
- mcfrs_change_speed(info);
-
- /*
- * Lastly enable the UART transmitter and receiver, and
- * interrupt enables.
- */
- info->imr = MCFUART_UIR_RXREADY;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- uartp[MCFUART_UIMR] = info->imr;
-
- info->flags |= ASYNC_INITIALIZED;
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!(info->flags & ASYNC_INITIALIZED))
- return;
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("Shutting down serial port %d (irq %d)....\n", info->line,
- info->irq);
-#endif
-
- local_irq_save(flags);
-
- uartp = info->addr;
- uartp[MCFUART_UIMR] = 0; /* mask all interrupts */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
-
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
- mcfrs_setsignals(info, 0, 0);
-
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
- }
-
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-}
-
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void mcfrs_change_speed(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned int baudclk, cflag;
- unsigned long flags;
- unsigned char mr1, mr2;
- int i;
-#ifdef CONFIG_M5272
- unsigned int fraction;
-#endif
-
- if (!info->port.tty || !info->port.tty->termios)
- return;
- cflag = info->port.tty->termios->c_cflag;
- if (info->addr == 0)
- return;
-
-#if 0
- printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
-#endif
-
- i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i &= ~CBAUDEX;
- if (i < 1 || i > 4)
- info->port.tty->termios->c_cflag &= ~CBAUDEX;
- else
- i += 15;
- }
- if (i == 0) {
- mcfrs_setsignals(info, 0, -1);
- return;
- }
-
- /* compute the baudrate clock */
-#ifdef CONFIG_M5272
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32;
- fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]);
- fraction *= 16;
- fraction /= (32 * mcfrs_baud_table[i]);
-#else
- baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
-#endif
-
- info->baud = mcfrs_baud_table[i];
-
- mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
- mr2 = 0;
-
- switch (cflag & CSIZE) {
- case CS5: mr1 |= MCFUART_MR1_CS5; break;
- case CS6: mr1 |= MCFUART_MR1_CS6; break;
- case CS7: mr1 |= MCFUART_MR1_CS7; break;
- case CS8:
- default: mr1 |= MCFUART_MR1_CS8; break;
- }
-
- if (cflag & PARENB) {
- if (cflag & CMSPAR) {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYMARK;
- else
- mr1 |= MCFUART_MR1_PARITYSPACE;
- } else {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYODD;
- else
- mr1 |= MCFUART_MR1_PARITYEVEN;
- }
- } else {
- mr1 |= MCFUART_MR1_PARITYNONE;
- }
-
- if (cflag & CSTOPB)
- mr2 |= MCFUART_MR2_STOP2;
- else
- mr2 |= MCFUART_MR2_STOP1;
-
- if (cflag & CRTSCTS) {
- mr1 |= MCFUART_MR1_RXRTS;
- mr2 |= MCFUART_MR2_TXCTS;
- }
-
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- uartp = info->addr;
-
- local_irq_save(flags);
-#if 0
- printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
- mr1, mr2, baudclk);
-#endif
- /*
- Note: pg 12-16 of MCF5206e User's Manual states that a
- software reset should be performed prior to changing
- UMR1,2, UCSR, UACR, bit 7
- */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UMR] = mr1;
- uartp[MCFUART_UMR] = mr2;
- uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */
- uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */
-#ifdef CONFIG_M5272
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
-#endif
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- mcfrs_setsignals(info, 1, -1);
- local_irq_restore(flags);
- return;
-}
-
-static void mcfrs_flush_chars(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars"))
- return;
-
- uartp = (volatile unsigned char *) info->addr;
-
- /*
- * re-enable receiver interrupt
- */
- local_irq_save(flags);
- if ((!(info->imr & MCFUART_UIR_RXREADY)) &&
- (info->flags & ASYNC_INITIALIZED) ) {
- info->imr |= MCFUART_UIR_RXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-
- if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf)
- return;
-
- /* Enable transmitter */
- local_irq_save(flags);
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static int mcfrs_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
- int c, total = 0;
-
-#if 0
- printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n",
- __FILE__, __LINE__, (int)tty, (int)buf, count);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write"))
- return 0;
-
- if (!tty || !info->xmit_buf)
- return 0;
-
- local_save_flags(flags);
- while (1) {
- local_irq_disable();
- c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1,
- ((int)SERIAL_XMIT_SIZE) - info->xmit_head));
- local_irq_restore(flags);
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
- local_irq_disable();
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- local_irq_disable();
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-
- return total;
-}
-
-static int mcfrs_write_room(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- int ret;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int mcfrs_chars_in_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer"))
- return 0;
- return info->xmit_cnt;
-}
-
-static void mcfrs_flush_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer"))
- return;
-
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
-
- tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void mcfrs_throttle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
- return;
-
- if (I_IXOFF(tty))
- info->x_char = STOP_CHAR(tty);
-
- /* Turn off RTS line (do this atomic) */
-}
-
-static void mcfrs_unthrottle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("unthrottle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- info->x_char = START_CHAR(tty);
- }
-
- /* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct mcf_serial * info,
- struct serial_struct * retinfo)
-{
- struct serial_struct tmp;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = (unsigned int) info->addr;
- tmp.irq = info->irq;
- tmp.flags = info->flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
-}
-
-static int set_serial_info(struct mcf_serial * info,
- struct serial_struct * new_info)
-{
- struct serial_struct new_serial;
- struct mcf_serial old_info;
- int retval = 0;
-
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.type != info->type) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if (info->count > 1)
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud_base = new_serial.baud_base;
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->type = new_serial.type;
- info->close_delay = new_serial.close_delay;
- info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
- retval = startup(info);
- return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- unsigned char status;
-
- local_irq_save(flags);
- uartp = info->addr;
- status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
- local_irq_restore(flags);
-
- return put_user(status,value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break( struct mcf_serial * info, int duration)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!info->addr)
- return;
- set_current_state(TASK_INTERRUPTIBLE);
- uartp = info->addr;
-
- local_irq_save(flags);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
- schedule_timeout(duration);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
- local_irq_restore(flags);
-}
-
-static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- return mcfrs_getsignals(info);
-}
-
-static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int rts = -1, dtr = -1;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- mcfrs_setsignals(info, dtr, rts);
-
- return 0;
-}
-
-static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int retval, error;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, HZ/4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(HZ/10) : HZ/4);
- return 0;
- case TIOCGSERIAL:
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct)))
- return get_serial_info(info,
- (struct serial_struct *) arg);
- return -EFAULT;
- case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int)))
- return get_lsr_info(info, (unsigned int *) arg);
- return -EFAULT;
- case TIOCSERGSTRUCT:
- error = copy_to_user((struct mcf_serial *) arg,
- info, sizeof(struct mcf_serial));
- if (error)
- return -EFAULT;
- return 0;
-
-#ifdef TIOCSET422
- case TIOCSET422: {
- unsigned int val;
- get_user(val, (unsigned int *) arg);
- mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
- break;
- }
- case TIOCGET422: {
- unsigned int val;
- val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
- put_user(val, (unsigned int *) arg);
- break;
- }
-#endif
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (tty->termios->c_cflag == old_termios->c_cflag)
- return;
-
- mcfrs_change_speed(info);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- mcfrs_setsignals(info, -1, 1);
-#if 0
- mcfrs_start(tty);
-#endif
- }
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_close()
- *
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void mcfrs_close(struct tty_struct *tty, struct file * filp)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close"))
- return;
-
- local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
- local_irq_restore(flags);
- return;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
-#endif
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("MCFRS: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
- if (--info->count < 0) {
- printk("MCFRS: bad serial port count for ttyS%d: %d\n",
- info->line, info->count);
- info->count = 0;
- }
- if (info->count) {
- local_irq_restore(flags);
- return;
- }
- info->flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
-
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- info->imr &= ~MCFUART_UIR_RXREADY;
- uartp = info->addr;
- uartp[MCFUART_UIMR] = info->imr;
-
-#if 0
- /* FIXME: do we need to keep this enabled for console?? */
- if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
- /* Do not disable the UART */ ;
- } else
-#endif
- shutdown(info);
- mcfrs_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- info->event = 0;
- info->port.tty = NULL;
-#if 0
- if (tty->ldisc.num != ldiscs[N_TTY].num) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty->ldisc = ldiscs[N_TTY];
- tty->termios->c_line = N_TTY;
- if (tty->ldisc.open)
- (tty->ldisc.open)(tty);
- }
-#endif
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
- local_irq_restore(flags);
-}
-
-/*
- * mcfrs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void
-mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-#ifdef CONFIG_M5272
-#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */
-
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- volatile unsigned char *uartp;
- unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent"))
- return;
-
- orig_jiffies = jiffies;
-
- /*
- * Set the check interval to be 1/5 of the approximate time
- * to send the entire fifo, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- lock_kernel();
-
- fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
- char_time = fifo_time / 5;
- if (char_time == 0)
- char_time = 1;
- if (timeout && timeout < char_time)
- char_time = timeout;
-
- /*
- * Clamp the timeout period at 2 * the time to empty the
- * fifo. Just to be safe, set the minimum at .5 seconds.
- */
- fifo_time *= 2;
- if (fifo_time < (HZ/2))
- fifo_time = HZ/2;
- if (!timeout || timeout > fifo_time)
- timeout = fifo_time;
-
- /*
- * Account for the number of bytes in the UART
- * transmitter FIFO plus any byte being shifted out.
- */
- uartp = (volatile unsigned char *) info->addr;
- for (;;) {
- fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB);
- if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY|
- MCFUART_USR_TXEMPTY)) ==
- MCFUART_USR_TXREADY)
- fifo_cnt++;
- if (fifo_cnt == 0)
- break;
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- unlock_kernel();
-#else
- /*
- * For the other coldfire models, assume all data has been sent
- */
-#endif
-}
-
-/*
- * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void mcfrs_hangup(struct tty_struct *tty)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_hangup"))
- return;
-
- mcfrs_flush_buffer(tty);
- shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct mcf_serial *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * mcfrs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- info->count--;
- info->blocked_open++;
- while (1) {
- local_irq_disable();
- mcfrs_setsignals(info, 1, 1);
- local_irq_enable();
- current->state = TASK_INTERRUPTIBLE;
- if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-int mcfrs_open(struct tty_struct *tty, struct file * filp)
-{
- struct mcf_serial *info;
- int retval, line;
-
- line = tty->index;
- if ((line < 0) || (line >= NR_PORTS))
- return -ENODEV;
- info = mcfrs_table + line;
- if (serial_paranoia_check(info, tty->name, "mcfrs_open"))
- return -ENODEV;
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s, count = %d\n", tty->name, info->count);
-#endif
- info->count++;
- tty->driver_data = info;
- info->port.tty = tty;
-
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval)
- return retval;
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s successful...\n", tty->name);
-#endif
- return 0;
-}
-
-/*
- * Based on the line number set up the internal interrupt stuff.
- */
-static void mcfrs_irqinit(struct mcf_serial *info)
-{
-#if defined(CONFIG_M5272)
- volatile unsigned long *icrp;
- volatile unsigned long *portp;
- volatile unsigned char *uartp;
-
- uartp = info->addr;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
-
- switch (info->line) {
- case 0:
- *icrp = 0xe0000000;
- break;
- case 1:
- *icrp = 0x0e000000;
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- /* Enable the output lines for the serial ports */
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
- *portp = (*portp & ~0x000000ff) | 0x00000055;
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
- *portp = (*portp & ~0x000003fc) | 0x000002a8;
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x30 + info->line; /* level 6, line based priority */
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
-#if defined(CONFIG_M527x)
- {
- /*
- * External Pin Mask Setting & Enable External Pin for Interface
- * [email protected]
- */
- u16 *serpin_enable_mask;
- serpin_enable_mask = (u16 *) (MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *serpin_enable_mask |= UART0_ENABLE_MASK;
- else if (info->line == 1)
- *serpin_enable_mask |= UART1_ENABLE_MASK;
- else if (info->line == 2)
- *serpin_enable_mask |= UART2_ENABLE_MASK;
- }
-#endif
-#if defined(CONFIG_M528x)
- /* make sure PUAPAR is set for UART0 and UART1 */
- if (info->line < 2) {
- volatile unsigned char *portp = (volatile unsigned char *) (MCF_MBAR + MCF5282_GPIO_PUAPAR);
- *portp |= (0x03 << (info->line * 2));
- }
-#endif
-#elif defined(CONFIG_M520x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x03;
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
- if (info->line < 2) {
- unsigned short *uart_par;
- uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD0
- | MCF_GPIO_PAR_UART_PAR_URXD0;
- else if (info->line == 1)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD1
- | MCF_GPIO_PAR_UART_PAR_URXD1;
- } else if (info->line == 2) {
- unsigned char *feci2c_par;
- feci2c_par = (unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
- *feci2c_par &= ~0x0F;
- *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
- | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
- }
-#elif defined(CONFIG_M532x)
- volatile unsigned char *uartp;
- uartp = info->addr;
- switch (info->line) {
- case 0:
- MCF_INTC0_ICR26 = 0x3;
- MCF_INTC0_CIMR = 26;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x000F;
- break;
- case 1:
- MCF_INTC0_ICR27 = 0x3;
- MCF_INTC0_CIMR = 27;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x0FF0;
- break;
- case 2:
- MCF_INTC0_ICR28 = 0x3;
- MCF_INTC0_CIMR = 28;
- /* GPIOs also must be initalized, depends on board */
- break;
- }
-#else
- volatile unsigned char *icrp, *uartp;
-
- switch (info->line) {
- case 0:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI1;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
- break;
- case 1:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- uartp = info->addr;
- uartp[MCFUART_UIVR] = info->irq;
-#endif
-
- /* Clear mask, so no surprise interrupts. */
- uartp[MCFUART_UIMR] = 0;
-
- if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
- "ColdFire UART", NULL)) {
- printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
- "vector=%d\n", info->line, info->irq);
- }
-
- return;
-}
-
-
-char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
-
-
-/*
- * Serial stats reporting...
- */
-int mcfrs_readproc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct mcf_serial *info;
- char str[20];
- int len, sigs, i;
-
- len = sprintf(page, mcfrs_drivername);
- for (i = 0; (i < NR_PORTS); i++) {
- info = &mcfrs_table[i];
- len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
- i, (unsigned int) info->addr, info->irq, info->baud);
- if (info->stats.rx || info->stats.tx)
- len += sprintf((page + len), "tx:%d rx:%d ",
- info->stats.tx, info->stats.rx);
- if (info->stats.rxframing)
- len += sprintf((page + len), "fe:%d ",
- info->stats.rxframing);
- if (info->stats.rxparity)
- len += sprintf((page + len), "pe:%d ",
- info->stats.rxparity);
- if (info->stats.rxbreak)
- len += sprintf((page + len), "brk:%d ",
- info->stats.rxbreak);
- if (info->stats.rxoverrun)
- len += sprintf((page + len), "oe:%d ",
- info->stats.rxoverrun);
-
- str[0] = str[1] = 0;
- if ((sigs = mcfrs_getsignals(info))) {
- if (sigs & TIOCM_RTS)
- strcat(str, "|RTS");
- if (sigs & TIOCM_CTS)
- strcat(str, "|CTS");
- if (sigs & TIOCM_DTR)
- strcat(str, "|DTR");
- if (sigs & TIOCM_CD)
- strcat(str, "|CD");
- }
-
- len += sprintf((page + len), "%s\n", &str[1]);
- }
-
- return(len);
-}
-
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
- printk(mcfrs_drivername);
-}
-
-static const struct tty_operations mcfrs_ops = {
- .open = mcfrs_open,
- .close = mcfrs_close,
- .write = mcfrs_write,
- .flush_chars = mcfrs_flush_chars,
- .write_room = mcfrs_write_room,
- .chars_in_buffer = mcfrs_chars_in_buffer,
- .flush_buffer = mcfrs_flush_buffer,
- .ioctl = mcfrs_ioctl,
- .throttle = mcfrs_throttle,
- .unthrottle = mcfrs_unthrottle,
- .set_termios = mcfrs_set_termios,
- .stop = mcfrs_stop,
- .start = mcfrs_start,
- .hangup = mcfrs_hangup,
- .read_proc = mcfrs_readproc,
- .wait_until_sent = mcfrs_wait_until_sent,
- .tiocmget = mcfrs_tiocmget,
- .tiocmset = mcfrs_tiocmset,
-};
-
-/* mcfrs_init inits the driver */
-static int __init
-mcfrs_init(void)
-{
- struct mcf_serial *info;
- unsigned long flags;
- int i;
-
- /* Setup base handler, and timer table. */
-#ifdef MCFPP_DCD0
- init_timer(&mcfrs_timer_struct);
- mcfrs_timer_struct.function = mcfrs_timer;
- mcfrs_timer_struct.data = 0;
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
- mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-#endif
- mcfrs_serial_driver = alloc_tty_driver(NR_PORTS);
- if (!mcfrs_serial_driver)
- return -ENOMEM;
-
- show_serial_version();
-
- /* Initialize the tty_driver structure */
- mcfrs_serial_driver->owner = THIS_MODULE;
- mcfrs_serial_driver->name = "ttyS";
- mcfrs_serial_driver->driver_name = "mcfserial";
- mcfrs_serial_driver->major = TTY_MAJOR;
- mcfrs_serial_driver->minor_start = 64;
- mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL;
- mcfrs_serial_driver->init_termios = tty_std_termios;
-
- mcfrs_serial_driver->init_termios.c_cflag =
- mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
- mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW;
-
- tty_set_operations(mcfrs_serial_driver, &mcfrs_ops);
-
- if (tty_register_driver(mcfrs_serial_driver)) {
- printk("MCFRS: Couldn't register serial driver\n");
- put_tty_driver(mcfrs_serial_driver);
- return(-EBUSY);
- }
-
- local_irq_save(flags);
-
- /*
- * Configure all the attached serial ports.
- */
- for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
- info->magic = SERIAL_MAGIC;
- info->line = i;
- info->port.tty = NULL;
- info->custom_divisor = 16;
- info->close_delay = 50;
- info->closing_wait = 3000;
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- INIT_WORK(&info->tqueue, mcfrs_offintr);
- INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
-
- info->imr = 0;
- mcfrs_setsignals(info, 0, 0);
- mcfrs_irqinit(info);
-
- printk("ttyS%d at 0x%04x (irq = %d)", info->line,
- (unsigned int) info->addr, info->irq);
- printk(" is a builtin ColdFire UART\n");
- }
-
- local_irq_restore(flags);
- return 0;
-}
-
-module_init(mcfrs_init);
-
-/****************************************************************************/
-/* Serial Console */
-/****************************************************************************/
-
-/*
- * Quick and dirty UART initialization, for console output.
- */
-
-void mcfrs_init_console(void)
-{
- volatile unsigned char *uartp;
- unsigned int clk;
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
-
- /*
- * Set port for defined baud , 8 data bits, 1 stop bit, no parity.
- */
- uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
- uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
-
-#ifdef CONFIG_M5272
-{
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
- fraction *= 16;
- fraction /= (32 * mcfrs_console_baud);
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
- clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
-}
-#else
- clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
-#endif
-
- uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
- uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-
- mcfrs_console_inited++;
- return;
-}
-
-
-/*
- * Setup for console. Argument comes from the boot command line.
- */
-
-int mcfrs_console_setup(struct console *cp, char *arg)
-{
- int i, n = CONSOLE_BAUD_RATE;
-
- if (!cp)
- return(-1);
-
- if (!strncmp(cp->name, "ttyS", 4))
- mcfrs_console_port = cp->index;
- else if (!strncmp(cp->name, "cua", 3))
- mcfrs_console_port = cp->index;
- else
- return(-1);
-
- if (arg)
- n = simple_strtoul(arg,NULL,0);
- for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
- if (mcfrs_baud_table[i] == n)
- break;
- if (i < MCFRS_BAUD_TABLE_SIZE) {
- mcfrs_console_baud = n;
- mcfrs_console_cbaud = 0;
- if (i > 15) {
- mcfrs_console_cbaud |= CBAUDEX;
- i -= 15;
- }
- mcfrs_console_cbaud |= i;
- }
- mcfrs_init_console(); /* make sure baud rate changes */
- return(0);
-}
-
-
-static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return mcfrs_serial_driver;
-}
-
-
-/*
- * Output a single character, using UART polled mode.
- * This is used for console output.
- */
-
-int mcfrs_put_char(char ch)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int i;
-
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- local_irq_save(flags);
- for (i = 0; (i < 0x10000); i++) {
- if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
- break;
- }
- if (i < 0x10000) {
- uartp[MCFUART_UTB] = ch;
- for (i = 0; (i < 0x10000); i++)
- if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
- break;
- }
- if (i >= 0x10000)
- mcfrs_init_console(); /* try and get it back */
- local_irq_restore(flags);
-
- return 1;
-}
-
-
-/*
- * rs_console_write is registered for printk output.
- */
-
-void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
-{
- if (!mcfrs_console_inited)
- mcfrs_init_console();
- while (len-- > 0) {
- if (*p == '\n')
- mcfrs_put_char('\r');
- mcfrs_put_char(*p++);
- }
-}
-
-/*
- * declare our consoles
- */
-
-struct console mcfrs_console = {
- .name = "ttyS",
- .write = mcfrs_console_write,
- .device = mcfrs_console_device,
- .setup = mcfrs_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init mcfrs_console_init(void)
-{
- register_console(&mcfrs_console);
- return 0;
-}
-
-console_initcall(mcfrs_console_init);
-
-/****************************************************************************/
diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h
deleted file mode 100644
index 56420e2..0000000
--- a/drivers/serial/mcfserial.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (c) 1999 Greg Ungerer <[email protected]>
- * Copyright (c) 2000-2001 Lineo, Inc. <http://www.lineo.com>
- * Copyright (c) 2002 SnapGear Inc., <http://www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller ([email protected])
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <[email protected]>
- */
-#ifndef _MCF_SERIAL_H
-#define _MCF_SERIAL_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/*
- * Define a local serial stats structure.
- */
-
-struct mcf_stats {
- unsigned int rx;
- unsigned int tx;
- unsigned int rxbreak;
- unsigned int rxframing;
- unsigned int rxparity;
- unsigned int rxoverrun;
-};
-
-
-/*
- * This is our internal structure for each serial port's state.
- * Each serial port has one of these structures associated with it.
- */
-
-struct mcf_serial {
- int magic;
- volatile unsigned char *addr; /* UART memory address */
- int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- struct tty_struct *tty;
- unsigned char imr; /* Software imr register */
- unsigned int baud;
- int sigs;
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int baud_base;
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- struct mcf_stats stats;
- struct work_struct tqueue;
- struct work_struct tqueue_hangup;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _MCF_SERIAL_H */
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/epca.c | 5 +----
1 files changed, 1 insertions(+), 4 deletions(-)
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 456e4ed..4998b27 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -1376,6 +1376,7 @@ static void post_fep_init(unsigned int crd)
unsigned long flags;
u16 tseg, rseg;
+ tty_port_init(&ch->port);
ch->brdchan = bc;
ch->mailbox = gd;
INIT_WORK(&ch->tqueue, do_softint);
@@ -1510,10 +1511,6 @@ static void post_fep_init(unsigned int crd)
ch->fepstopca = 0;
ch->close_delay = 50;
- ch->port.count = 0;
- ch->port.blocked_open = 0;
- init_waitqueue_head(&ch->port.open_wait);
- init_waitqueue_head(&ch->port.close_wait);
spin_unlock_irqrestore(&epca_lock, flags);
}
There are plans afoot to make the IRQ ranges dynamic. In that situation we
don't want drivers having their own huge arrays for per IRQ data so use a hash
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/68328serial.c | 11 +-----
drivers/serial/8250.c | 74 +++++++++++++++++++++++++++++++++---------
2 files changed, 60 insertions(+), 25 deletions(-)
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 381b12a..277b78d 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -66,7 +66,6 @@
#endif
static struct m68k_serial m68k_soft[NR_PORTS];
-struct m68k_serial *IRQ_ports[NR_IRQS];
static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
@@ -375,15 +374,11 @@ clear_and_return:
*/
irqreturn_t rs_interrupt(int irq, void *dev_id)
{
- struct m68k_serial * info;
+ struct m68k_serial * info = dev_id;
m68328_uart *uart;
unsigned short rx;
unsigned short tx;
- info = IRQ_ports[irq];
- if(!info)
- return IRQ_NONE;
-
uart = &uart_addr[info->line];
rx = uart->urx.w;
@@ -1383,8 +1378,6 @@ rs68328_init(void)
info->port, info->irq);
printk(" is a builtin MC68328 UART\n");
- IRQ_ports[info->irq] = info; /* waste of space */
-
#ifdef CONFIG_M68VZ328
if (i > 0 )
PJSEL &= 0xCF; /* PSW enable second port output */
@@ -1393,7 +1386,7 @@ rs68328_init(void)
if (request_irq(uart_irqs[i],
rs_interrupt,
IRQF_DISABLED,
- "M68328_UART", NULL))
+ "M68328_UART", info))
panic("Unable to attach 68328 serial interrupt\n");
}
local_irq_restore(flags);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563..9f5e60d 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -39,7 +39,7 @@
#include <linux/nmi.h>
#include <linux/mutex.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include "8250.h"
@@ -145,11 +145,15 @@ struct uart_8250_port {
};
struct irq_info {
- spinlock_t lock;
+ struct hlist_node node;
+ int irq;
+ spinlock_t lock; /* Protects list not the hash */
struct list_head *head;
};
-static struct irq_info irq_lists[NR_IRQS];
+#define NR_IRQ_HASH 32 /* Can be adjusted later */
+static struct hlist_head irq_lists[NR_IRQ_HASH];
+static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
/*
* Here we define the default xmit fifo size used for each type of UART.
@@ -266,7 +270,7 @@ static const struct serial8250_config uart_config[] = {
},
};
-#if defined (CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_SERIAL_8250_AU1X00)
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
@@ -1535,15 +1539,43 @@ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
BUG_ON(i->head != &up->list);
i->head = NULL;
}
-
spin_unlock_irq(&i->lock);
+ /* List empty so throw away the hash node */
+ if (i->head == NULL) {
+ hlist_del(&i->node);
+ kfree(i);
+ }
}
static int serial_link_irq_chain(struct uart_8250_port *up)
{
- struct irq_info *i = irq_lists + up->port.irq;
+ struct hlist_head *h;
+ struct hlist_node *n;
+ struct irq_info *i;
int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ if (n == NULL) {
+ i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
+ if (i == NULL) {
+ mutex_unlock(&hash_mutex);
+ return -ENOMEM;
+ }
+ spin_lock_init(&i->lock);
+ i->irq = up->port.irq;
+ hlist_add_head(&i->node, h);
+ }
+ mutex_unlock(&hash_mutex);
+
spin_lock_irq(&i->lock);
if (i->head) {
@@ -1567,14 +1599,27 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
static void serial_unlink_irq_chain(struct uart_8250_port *up)
{
- struct irq_info *i = irq_lists + up->port.irq;
+ struct irq_info *i;
+ struct hlist_node *n;
+ struct hlist_head *h;
- BUG_ON(i->head == NULL);
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+ BUG_ON(n == NULL);
+ BUG_ON(i->head == NULL);
+
if (list_empty(i->head))
free_irq(up->port.irq, i);
-
serial_do_unlink(i, up);
+ mutex_unlock(&hash_mutex);
}
/* Base timer interval for polling */
@@ -2950,7 +2995,7 @@ EXPORT_SYMBOL(serial8250_unregister_port);
static int __init serial8250_init(void)
{
- int ret, i;
+ int ret;
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
@@ -2959,9 +3004,6 @@ static int __init serial8250_init(void)
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
- for (i = 0; i < NR_IRQS; i++)
- spin_lock_init(&irq_lists[i].lock);
-
ret = uart_register_driver(&serial8250_reg);
if (ret)
goto out;
@@ -2984,11 +3026,11 @@ static int __init serial8250_init(void)
goto out;
platform_device_del(serial8250_isa_devs);
- put_dev:
+put_dev:
platform_device_put(serial8250_isa_devs);
- unreg_uart_drv:
+unreg_uart_drv:
uart_unregister_driver(&serial8250_reg);
- out:
+out:
return ret;
}
From: Mike Frysinger <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/bfin_5xx.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a0d30b..4a023c6 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1056,7 +1056,7 @@ static __init void early_serial_write(struct console *con, const char *s,
}
}
-static struct __init console bfin_early_serial_console = {
+static struct __initdata console bfin_early_serial_console = {
.name = "early_BFuart",
.write = early_serial_write,
.device = uart_console_device,
From: Sonic Zhang <[email protected]>
Signed-off-by: Sonic Zhang <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/bfin_5xx.c | 39 ++++++++++++++++++++++-----------------
1 files changed, 22 insertions(+), 17 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a023c6..04eeef0 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1100,20 +1100,26 @@ static struct uart_driver bfin_serial_reg = {
static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_suspend_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
static int bfin_serial_resume(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_resume_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
@@ -1133,27 +1139,26 @@ static int bfin_serial_probe(struct platform_device *dev)
continue;
bfin_serial_ports[i].port.dev = &dev->dev;
uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
- platform_set_drvdata(dev, &bfin_serial_ports[i]);
}
}
return 0;
}
-static int bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(pdev);
-
+ int i;
+ for (i = 0; i < nr_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ bfin_serial_ports[i].port.dev = NULL;
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- gpio_free(uart->cts_pin);
- gpio_free(uart->rts_pin);
+ gpio_free(bfin_serial_ports[i].cts_pin);
+ gpio_free(bfin_serial_ports[i].rts_pin);
#endif
-
- platform_set_drvdata(pdev, NULL);
-
- if (uart)
- uart_remove_one_port(&bfin_serial_reg, &uart->port);
+ }
return 0;
}
From: Mike Frysinger <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/bfin_5xx.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 04eeef0..976de91 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -126,13 +126,13 @@ static int kgdb_entry_state;
void kgdb_put_debug_char(int chr)
{
struct bfin_serial_port *uart;
-
+
if (CONFIG_KGDB_UART_PORT < 0
|| CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while (!(UART_GET_LSR(uart) & THRE)) {
SSYNC();
}
@@ -152,7 +152,7 @@ int kgdb_get_debug_char(void)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
From: Mike Frysinger <[email protected]>
move common variables out of serial headers and into the serial driver and
rename "nr_ports" to "nr_active_ports" so as to easily differentiat
between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled)
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
.../mach-bf527/include/mach/bfin_serial_5xx.h | 3 ---
.../mach-bf533/include/mach/bfin_serial_5xx.h | 2 --
.../mach-bf537/include/mach/bfin_serial_5xx.h | 3 ---
.../mach-bf548/include/mach/bfin_serial_5xx.h | 3 ---
.../mach-bf561/include/mach/bfin_serial_5xx.h | 2 --
drivers/serial/bfin_5xx.c | 17 ++++++++++-------
6 files changed, 10 insertions(+), 20 deletions(-)
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6e..a23d047 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -119,7 +119,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -164,8 +163,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b..20471cd 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -111,7 +111,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -142,7 +141,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#define DRIVER_NAME "bfin-uart"
-int nr_ports = BFIN_UART_NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ff..08dfe30 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -119,7 +119,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -164,8 +163,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446..76976b1 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -105,7 +105,6 @@ struct bfin_serial_port {
#endif
};
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -170,8 +169,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa0278..6cddca4 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -111,7 +111,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -142,7 +141,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
#define DRIVER_NAME "bfin-uart"
-int nr_ports = BFIN_UART_NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 976de91..382fb8d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,9 @@
#define BFIN_SERIAL_MAJOR 204
#define BFIN_SERIAL_MINOR 64
+static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+
/*
* Setup for console. Argument comes from the menuconfig
*/
@@ -859,7 +862,7 @@ static void __init bfin_serial_init_ports(void)
return;
first = 0;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
@@ -961,7 +964,7 @@ bfin_serial_console_setup(struct console *co, char *options)
* if so, search for the first available port that does have
* console support.
*/
- if (co->index == -1 || co->index >= nr_ports)
+ if (co->index == -1 || co->index >= nr_active_ports)
co->index = 0;
uart = &bfin_serial_ports[co->index];
@@ -1072,7 +1075,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
struct bfin_serial_port *uart;
struct ktermios t;
- if (port == -1 || port >= nr_ports)
+ if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
bfin_early_serial_console.index = port;
@@ -1102,7 +1105,7 @@ static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
if (bfin_serial_ports[i].port.dev != &dev->dev)
continue;
uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
@@ -1115,7 +1118,7 @@ static int bfin_serial_resume(struct platform_device *dev)
{
int i;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
if (bfin_serial_ports[i].port.dev != &dev->dev)
continue;
uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
@@ -1134,7 +1137,7 @@ static int bfin_serial_probe(struct platform_device *dev)
break;
if (i < dev->num_resources) {
- for (i = 0; i < nr_ports; i++, res++) {
+ for (i = 0; i < nr_active_ports; i++, res++) {
if (bfin_serial_ports[i].port.mapbase != res->start)
continue;
bfin_serial_ports[i].port.dev = &dev->dev;
@@ -1149,7 +1152,7 @@ static int bfin_serial_remove(struct platform_device *dev)
{
int i;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
if (bfin_serial_ports[i].port.dev != &dev->dev)
continue;
uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
From: Sonic Zhang <[email protected]>
Signed-off-by: Sonic Zhang <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/bfin_5xx.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 382fb8d..8d2d757 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -320,9 +320,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uart->port);
-
- if (uart_circ_empty(xmit))
- bfin_serial_stop_tx(&uart->port);
}
static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
From: Sonic Zhang <[email protected]>
Disable irq and return immediately.
Signed-off-by: Sonic Zhang <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/bfin_5xx.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 8d2d757..5e20f50 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -301,7 +301,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
bfin_serial_mctrl_check(uart);
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
- bfin_serial_stop_tx(&uart->port);
+#ifdef CONFIG_BF54x
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+#endif
+ UART_CLEAR_IER(uart, ETBEI);
return;
}
From: Graf Yang <[email protected]>
We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework
to monitor the TX status.
Signed-off-by: Graf Yang <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
.../mach-bf527/include/mach/bfin_serial_5xx.h | 3 +++
.../mach-bf533/include/mach/bfin_serial_5xx.h | 2 ++
.../mach-bf537/include/mach/bfin_serial_5xx.h | 3 +++
.../mach-bf548/include/mach/bfin_serial_5xx.h | 3 +++
.../mach-bf561/include/mach/bfin_serial_5xx.h | 2 ++
drivers/serial/bfin_5xx.c | 4 ++++
6 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a23d047..75722d6 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 20471cd..815bfe5 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
# endif
#endif
+#define BFIN_UART_TX_FIFO_SIZE 2
+
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 08dfe30..b3f87e1 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 76976b1..e4cf35e 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -82,6 +82,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 6cddca4..e0ce0c1 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
# endif
#endif
+#define BFIN_UART_TX_FIFO_SIZE 2
+
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 5e20f50..a5cf0e7 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -761,6 +761,9 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
val |= UCEN;
UART_PUT_GCTL(uart, val);
+ /* Port speed changed, update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -865,6 +868,7 @@ static void __init bfin_serial_init_ports(void)
for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
+ bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
bfin_serial_ports[i].port.iotype = UPIO_MEM;
From: Sonic Zhang <[email protected]>
Signed-off-by: Sonic Zhang <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
arch/blackfin/kernel/bfin_dma_5xx.c | 13 ++++-----
drivers/serial/bfin_5xx.c | 50 +++++++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+), 7 deletions(-)
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 93229b3..339293d 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -117,15 +117,14 @@ int request_dma(unsigned int channel, char *device_id)
#ifdef CONFIG_BF54x
if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
- if (strncmp(device_id, "BFIN_UART", 9) == 0) {
- dma_ch[channel].regs->peripheral_map &= 0x0FFF;
- dma_ch[channel].regs->peripheral_map |=
+ unsigned int per_map;
+ per_map = dma_ch[channel].regs->peripheral_map & 0xFFF;
+ if (strncmp(device_id, "BFIN_UART", 9) == 0)
+ dma_ch[channel].regs->peripheral_map = per_map |
((channel - CH_UART2_RX + 0xC)<<12);
- } else {
- dma_ch[channel].regs->peripheral_map &= 0x0FFF;
- dma_ch[channel].regs->peripheral_map |=
+ else
+ dma_ch[channel].regs->peripheral_map = per_map |
((channel - CH_UART2_RX + 0x6)<<12);
- }
}
#endif
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a5cf0e7..569f0e2 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -649,6 +649,42 @@ static int bfin_serial_startup(struct uart_port *port)
free_irq(uart->port.irq, uart);
return -EBUSY;
}
+
+# ifdef CONFIG_BF54x
+ {
+ unsigned uart_dma_ch_rx, uart_dma_ch_tx;
+
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ uart_dma_ch_rx = CH_UART3_RX;
+ uart_dma_ch_tx = CH_UART3_TX;
+ break;
+ case IRQ_UART2_RX:
+ uart_dma_ch_rx = CH_UART2_RX;
+ uart_dma_ch_tx = CH_UART2_TX;
+ break;
+ default:
+ uart_dma_ch_rx = uart_dma_ch_tx = 0;
+ break;
+ };
+
+ if (uart_dma_ch_rx &&
+ request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
+ printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ if (uart_dma_ch_tx &&
+ request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
+ printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+ free_dma(uart_dma_ch_rx);
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ }
+# endif
#endif
UART_SET_IER(uart, ERBFI);
return 0;
@@ -666,6 +702,20 @@ static void bfin_serial_shutdown(struct uart_port *port)
del_timer(&(uart->rx_dma_timer));
dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
#else
+#ifdef CONFIG_BF54x
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ free_dma(CH_UART3_RX);
+ free_dma(CH_UART3_TX);
+ break;
+ case IRQ_UART2_RX:
+ free_dma(CH_UART2_RX);
+ free_dma(CH_UART2_TX);
+ break;
+ default:
+ break;
+ };
+#endif
#ifdef CONFIG_KGDB_UART
if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
Right now we have ifdefs and hooks in the core ioctl handler for TIOCLINUX
and then test if its a console. This is brain dead. Instead call the
tioclinux helper from the relevant driver ioctl methods.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 4 ----
drivers/char/vt.c | 2 --
drivers/char/vt_ioctl.c | 2 ++
3 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e4dce87..2f05728 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -3026,10 +3026,6 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return put_user(tty->ldisc.ops->num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
-#ifdef CONFIG_VT
- case TIOCLINUX:
- return tioclinux(tty, arg);
-#endif
/*
* Break handling
*/
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 60359c3..05ca1c5 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2583,8 +2583,6 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
int lines;
int ret;
- if (tty->driver->type != TTY_DRIVER_TYPE_CONSOLE)
- return -EINVAL;
if (current->signal->tty != tty && !capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(type, p))
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index c904e9a..8944ce5 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -395,6 +395,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
kbd = kbd_table + console;
switch (cmd) {
+ case TIOCLINUX:
+ return tioclinux(tty, arg);
case KIOCSOUND:
if (!perm)
goto eperm;
Signed-off-by: Alan Cox <[email protected]>
---
arch/um/drivers/line.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index d741f35..14a102e 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -275,6 +275,8 @@ int line_ioctl(struct tty_struct *tty, struct file * file,
case TIOCGLTC:
case TIOCSLTC:
#endif
+ /* Note: these are out of date as we now have TCGETS2 etc but this
+ whole lot should probably go away */
case TCGETS:
case TCSETSF:
case TCSETSW:
From: Jiri Slaby <[email protected]>
It's pretty useless to have one setup() function separated along with
module_init() which only calls a function from ip2main anyway. Get rid
of ip2base.
Remove also checks of always-true now.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/ip2/Makefile | 2 -
drivers/char/ip2/ip2base.c | 108 --------------------------------------------
drivers/char/ip2/ip2main.c | 92 +++++++++++++++++++++++++++++++------
3 files changed, 77 insertions(+), 125 deletions(-)
delete mode 100644 drivers/char/ip2/ip2base.c
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
index 939618f..bc397d9 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/char/ip2/Makefile
@@ -4,5 +4,5 @@
obj-$(CONFIG_COMPUTONE) += ip2.o
-ip2-objs := ip2base.o ip2main.o
+ip2-objs := ip2main.o
diff --git a/drivers/char/ip2/ip2base.c b/drivers/char/ip2/ip2base.c
deleted file mode 100644
index 8155e24..0000000
--- a/drivers/char/ip2/ip2base.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// ip2.c
-// This is a dummy module to make the firmware available when needed
-// and allows it to be unloaded when not. Rumor is the __initdata
-// macro doesn't always works on all platforms so we use this kludge.
-// If not compiled as a module it just makes fip_firm avaliable then
-// __initdata should work as advertized
-//
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-
-#ifndef __init
-#define __init
-#endif
-#ifndef __initfunc
-#define __initfunc(a) a
-#endif
-#ifndef __initdata
-#define __initdata
-#endif
-
-#include "ip2types.h"
-
-int
-ip2_loadmain(int *, int *); // ref into ip2main.c
-
-/* Note: Add compiled in defaults to these arrays, not to the structure
- in ip2.h any longer. That structure WILL get overridden
- by these values, or command line values, or insmod values!!! =mhw=
-*/
-static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 };
-static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
-
-static int poll_only = 0;
-
-MODULE_AUTHOR("Doug McNash");
-MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards");
-module_param(poll_only, bool, 0);
-MODULE_PARM_DESC(poll_only,"Do not use card interrupts");
-
-
-static int __init ip2_init(void)
-{
- if( poll_only ) {
- /* Hard lock the interrupts to zero */
- irq[0] = irq[1] = irq[2] = irq[3] = 0;
- }
-
- return ip2_loadmain(io, irq);
-}
-module_init(ip2_init);
-
-MODULE_LICENSE("GPL");
-
-#ifndef MODULE
-/******************************************************************************
- * ip2_setup:
- * str: kernel command line string
- *
- * Can't autoprobe the boards so user must specify configuration on
- * kernel command line. Sane people build it modular but the others
- * come here.
- *
- * Alternating pairs of io,irq for up to 4 boards.
- * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
- *
- * io=0 => No board
- * io=1 => PCI
- * io=2 => EISA
- * else => ISA I/O address
- *
- * irq=0 or invalid for ISA will revert to polling mode
- *
- * Any value = -1, do not overwrite compiled in value.
- *
- ******************************************************************************/
-static int __init ip2_setup(char *str)
-{
- int ints[10]; /* 4 boards, 2 parameters + 2 */
- int i, j;
-
- str = get_options (str, ARRAY_SIZE(ints), ints);
-
- for( i = 0, j = 1; i < 4; i++ ) {
- if( j > ints[0] ) {
- break;
- }
- if( ints[j] >= 0 ) {
- io[i] = ints[j];
- }
- j++;
- if( j > ints[0] ) {
- break;
- }
- if( ints[j] >= 0 ) {
- irq[i] = ints[j];
- }
- j++;
- }
- return 1;
-}
-__setup("ip2=", ip2_setup);
-#endif /* !MODULE */
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 689f9dc..79bca61 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -157,9 +157,6 @@ static char *pcVersion = "1.2.14";
static char *pcDriver_name = "ip2";
static char *pcIpl = "ip2ipl";
-// cheezy kludge or genius - you decide?
-int ip2_loadmain(int *, int *);
-
/***********************/
/* Function Prototypes */
/***********************/
@@ -287,6 +284,7 @@ static int tracewrap;
MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
+MODULE_LICENSE("GPL");
static int poll_only = 0;
@@ -297,6 +295,22 @@ static int iindx;
static char rirqs[IP2_MAX_BOARDS];
static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
+/* Note: Add compiled in defaults to these arrays, not to the structure
+ in ip2.h any longer. That structure WILL get overridden
+ by these values, or command line values, or insmod values!!! =mhw=
+*/
+static int io[IP2_MAX_BOARDS];
+static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
+
+MODULE_AUTHOR("Doug McNash");
+MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
+module_param(poll_only, bool, 0);
+MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
+
/* for sysfs class support */
static struct class *ip2_class;
@@ -494,8 +508,53 @@ static const struct firmware *ip2_request_firmware(void)
return fw;
}
-int
-ip2_loadmain(int *iop, int *irqp)
+#ifndef MODULE
+/******************************************************************************
+ * ip2_setup:
+ * str: kernel command line string
+ *
+ * Can't autoprobe the boards so user must specify configuration on
+ * kernel command line. Sane people build it modular but the others
+ * come here.
+ *
+ * Alternating pairs of io,irq for up to 4 boards.
+ * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
+ *
+ * io=0 => No board
+ * io=1 => PCI
+ * io=2 => EISA
+ * else => ISA I/O address
+ *
+ * irq=0 or invalid for ISA will revert to polling mode
+ *
+ * Any value = -1, do not overwrite compiled in value.
+ *
+ ******************************************************************************/
+static int __init ip2_setup(char *str)
+{
+ int j, ints[10]; /* 4 boards, 2 parameters + 2 */
+ unsigned int i;
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+
+ for (i = 0, j = 1; i < 4; i++) {
+ if (j > ints[0])
+ break;
+ if (ints[j] >= 0)
+ io[i] = ints[j];
+ j++;
+ if (j > ints[0])
+ break;
+ if (ints[j] >= 0)
+ irq[i] = ints[j];
+ j++;
+ }
+ return 1;
+}
+__setup("ip2=", ip2_setup);
+#endif /* !MODULE */
+
+static int ip2_loadmain(void)
{
int i, j, box;
int err = 0;
@@ -505,6 +564,11 @@ ip2_loadmain(int *iop, int *irqp)
static struct pci_dev *pci_dev_i = NULL;
const struct firmware *fw = NULL;
+ if (poll_only) {
+ /* Hard lock the interrupts to zero */
+ irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
+ }
+
ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
/* process command line arguments to modprobe or
@@ -512,14 +576,11 @@ ip2_loadmain(int *iop, int *irqp)
/* irqp and iop should ALWAYS be specified now... But we check
them individually just to be sure, anyways... */
for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if (iop) {
- ip2config.addr[i] = iop[i];
- if (irqp) {
- if( irqp[i] >= 0 ) {
- ip2config.irq[i] = irqp[i];
- } else {
- ip2config.irq[i] = 0;
- }
+ ip2config.addr[i] = io[i];
+ if (irq[i] >= 0)
+ ip2config.irq[i] = irq[i];
+ else
+ ip2config.irq[i] = 0;
// This is a little bit of a hack. If poll_only=1 on command
// line back in ip2.c OR all IRQs on all specified boards are
// explicitly set to 0, then drop to poll only mode and override
@@ -531,9 +592,7 @@ ip2_loadmain(int *iop, int *irqp)
// to -1, is to use 0 as a hard coded, do not probe.
//
// /\/\|=mhw=|\/\/
- poll_only |= irqp[i];
- }
- }
+ poll_only |= irq[i];
}
poll_only = !poll_only;
@@ -783,6 +842,7 @@ out_chrdev:
out:
return err;
}
+module_init(ip2_loadmain);
/******************************************************************************/
/* Function: ip2_init_board() */
From: Jiri Slaby <[email protected]>
- do not init .bss zeroed data to zero again (by memset or
explicit assignment)
- use char [] instead of char * for string constants
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/ip2/ip2main.c | 18 +++++++-----------
1 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 79bca61..1d46284 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -150,12 +150,12 @@ static int ip2_read_proc(char *, char **, off_t, int, int *, void * );
/*************/
/* String constants to identify ourselves */
-static char *pcName = "Computone IntelliPort Plus multiport driver";
-static char *pcVersion = "1.2.14";
+static const char pcName[] = "Computone IntelliPort Plus multiport driver";
+static const char pcVersion[] = "1.2.14";
/* String constants for port names */
-static char *pcDriver_name = "ip2";
-static char *pcIpl = "ip2ipl";
+static const char pcDriver_name[] = "ip2";
+static const char pcIpl[] = "ip2ipl";
/***********************/
/* Function Prototypes */
@@ -237,8 +237,8 @@ static const struct file_operations ip2_ipl = {
.open = ip2_ipl_open,
};
-static unsigned long irq_counter = 0;
-static unsigned long bh_counter = 0;
+static unsigned long irq_counter;
+static unsigned long bh_counter;
// Use immediate queue to service interrupts
#define USE_IQI
@@ -286,7 +286,7 @@ MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
MODULE_LICENSE("GPL");
-static int poll_only = 0;
+static int poll_only;
static int Eisa_irq;
static int Eisa_slot;
@@ -615,10 +615,6 @@ static int ip2_loadmain(void)
/* Initialise the iiEllis subsystem. */
iiEllisInit();
- /* Initialize arrays. */
- memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable );
- memset( DevTable, 0, sizeof DevTable );
-
/* Initialise all the boards we can find (up to the maximum). */
for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
switch ( ip2config.addr[i] ) {
From: Jiri Slaby <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/ip2/ip2main.c | 14 +++++---------
1 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 1d46284..098c9de 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -375,9 +375,7 @@ have_requested_irq( char irq )
/* handle subsequent installations of the driver. All memory allocated by the */
/* driver should be returned since it may be unloaded from memory. */
/******************************************************************************/
-#ifdef MODULE
-void __exit
-ip2_cleanup_module(void)
+static void __exit ip2_cleanup_module(void)
{
int err;
int i;
@@ -431,7 +429,8 @@ ip2_cleanup_module(void)
ip2config.pci_dev[i] = NULL;
}
#endif
- if ((pB = i2BoardPtrTable[i]) != 0 ) {
+ pB = i2BoardPtrTable[i];
+ if (pB != NULL) {
kfree ( pB );
i2BoardPtrTable[i] = NULL;
}
@@ -448,7 +447,6 @@ ip2_cleanup_module(void)
#endif
}
module_exit(ip2_cleanup_module);
-#endif /* MODULE */
static const struct tty_operations ip2_ops = {
.open = ip2_open,
@@ -1255,9 +1253,8 @@ ip2_polled_interrupt(void)
{
int i;
i2eBordStrPtr pB;
- const int irq = 0;
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq );
+ ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0);
/* Service just the boards on the list using this irq */
for( i = 0; i < i2nBoards; ++i ) {
@@ -1266,9 +1263,8 @@ ip2_polled_interrupt(void)
// Only process those boards which match our IRQ.
// IRQ = 0 for polled boards, we won't poll "IRQ" boards
- if ( pB && (pB->i2eUsingIrq == irq) ) {
+ if (pB && pB->i2eUsingIrq == 0)
ip2_irq_work(pB);
- }
}
++irq_counter;
From: Jiri Slaby <[email protected]>
Cleanup of module_init/exit:
- mostly whitespace
- remove empty functions
- replace c++ comments
- remove useless prints (module loaded, unloaded)
- mark the calls as __exit and __init
- use break; and return; to save some indent levels after it
- note resource leakage
It's still mess, but now it's readable.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/ip2/i2ellis.c | 32 ---
drivers/char/ip2/i2ellis.h | 2
drivers/char/ip2/ip2main.c | 415 +++++++++++++++++++++-----------------------
3 files changed, 198 insertions(+), 251 deletions(-)
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
index 3601017..29db44d 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/char/ip2/i2ellis.c
@@ -69,38 +69,6 @@ static DEFINE_RWLOCK(Dl_spinlock);
//=======================================================
//******************************************************************************
-// Function: iiEllisInit()
-// Parameters: None
-//
-// Returns: Nothing
-//
-// Description:
-//
-// This routine performs any required initialization of the iiEllis subsystem.
-//
-//******************************************************************************
-static void
-iiEllisInit(void)
-{
-}
-
-//******************************************************************************
-// Function: iiEllisCleanup()
-// Parameters: None
-//
-// Returns: Nothing
-//
-// Description:
-//
-// This routine performs any required cleanup of the iiEllis subsystem.
-//
-//******************************************************************************
-static void
-iiEllisCleanup(void)
-{
-}
-
-//******************************************************************************
// Function: iiSetAddress(pB, address, delay)
// Parameters: pB - pointer to the board structure
// address - the purported I/O address of the board
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
index c88a64e..fb6df24 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/char/ip2/i2ellis.h
@@ -511,7 +511,6 @@ typedef void (*delayFunc_t)(unsigned int);
//
// Initialization of a board & structure is in four (five!) parts:
//
-// 0) iiEllisInit() - Initialize iiEllis subsystem.
// 1) iiSetAddress() - Define the board address & delay function for a board.
// 2) iiReset() - Reset the board (provided it exists)
// -- Note you may do this to several boards --
@@ -523,7 +522,6 @@ typedef void (*delayFunc_t)(unsigned int);
// loadware. To change loadware, you must begin again with step 2, resetting
// the board again (step 1 not needed).
-static void iiEllisInit(void);
static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t );
static int iiReset(i2eBordStrPtr);
static int iiResetDelay(i2eBordStrPtr);
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 098c9de..39269d1 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -314,31 +314,27 @@ MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
/* for sysfs class support */
static struct class *ip2_class;
-// Some functions to keep track of what irq's we have
+/* Some functions to keep track of what irqs we have */
-static int
-is_valid_irq(int irq)
+static int __init is_valid_irq(int irq)
{
int *i = Valid_Irqs;
- while ((*i != 0) && (*i != irq)) {
+ while (*i != 0 && *i != irq)
i++;
- }
- return (*i);
+
+ return *i;
}
-static void
-mark_requested_irq( char irq )
+static void __init mark_requested_irq(char irq)
{
rirqs[iindx++] = irq;
}
-#ifdef MODULE
-static int
-clear_requested_irq( char irq )
+static int __exit clear_requested_irq(char irq)
{
int i;
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
if (rirqs[i] == irq) {
rirqs[i] = 0;
return 1;
@@ -346,17 +342,15 @@ clear_requested_irq( char irq )
}
return 0;
}
-#endif
-static int
-have_requested_irq( char irq )
+static int have_requested_irq(char irq)
{
- // array init to zeros so 0 irq will not be requested as a side effect
+ /* array init to zeros so 0 irq will not be requested as a side
+ * effect */
int i;
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i)
if (rirqs[i] == irq)
return 1;
- }
return 0;
}
@@ -380,46 +374,44 @@ static void __exit ip2_cleanup_module(void)
int err;
int i;
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion );
-#endif
/* Stop poll timer if we had one. */
- if ( TimerOn ) {
- del_timer ( &PollTimer );
+ if (TimerOn) {
+ del_timer(&PollTimer);
TimerOn = 0;
}
/* Reset the boards we have. */
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( i2BoardPtrTable[i] ) {
- iiReset( i2BoardPtrTable[i] );
- }
- }
+ for (i = 0; i < IP2_MAX_BOARDS; i++)
+ if (i2BoardPtrTable[i])
+ iiReset(i2BoardPtrTable[i]);
/* The following is done at most once, if any boards were installed. */
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( i2BoardPtrTable[i] ) {
- iiResetDelay( i2BoardPtrTable[i] );
+ for (i = 0; i < IP2_MAX_BOARDS; i++) {
+ if (i2BoardPtrTable[i]) {
+ iiResetDelay(i2BoardPtrTable[i]);
/* free io addresses and Tibet */
- release_region( ip2config.addr[i], 8 );
+ release_region(ip2config.addr[i], 8);
device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
- device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
+ device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR,
+ 4 * i + 1));
}
/* Disable and remove interrupt handler. */
- if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) {
- free_irq ( ip2config.irq[i], (void *)&pcName);
- clear_requested_irq( ip2config.irq[i]);
+ if (ip2config.irq[i] > 0 &&
+ have_requested_irq(ip2config.irq[i])) {
+ free_irq(ip2config.irq[i], (void *)&pcName);
+ clear_requested_irq(ip2config.irq[i]);
}
}
class_destroy(ip2_class);
- if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) {
- printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err);
- }
+ err = tty_unregister_driver(ip2_tty_driver);
+ if (err)
+ printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n",
+ err);
put_tty_driver(ip2_tty_driver);
unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
remove_proc_entry("ip2mem", NULL);
- // free memory
+ /* free memory */
for (i = 0; i < IP2_MAX_BOARDS; i++) {
void *pB;
#ifdef CONFIG_PCI
@@ -431,20 +423,14 @@ static void __exit ip2_cleanup_module(void)
#endif
pB = i2BoardPtrTable[i];
if (pB != NULL) {
- kfree ( pB );
+ kfree(pB);
i2BoardPtrTable[i] = NULL;
}
- if ((DevTableMem[i]) != NULL ) {
- kfree ( DevTableMem[i] );
+ if (DevTableMem[i] != NULL) {
+ kfree(DevTableMem[i]);
DevTableMem[i] = NULL;
}
}
-
- /* Cleanup the iiEllis subsystem. */
- iiEllisCleanup();
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "IP2 Unloaded\n" );
-#endif
}
module_exit(ip2_cleanup_module);
@@ -552,14 +538,13 @@ static int __init ip2_setup(char *str)
__setup("ip2=", ip2_setup);
#endif /* !MODULE */
-static int ip2_loadmain(void)
+static int __init ip2_loadmain(void)
{
int i, j, box;
int err = 0;
- static int loaded;
i2eBordStrPtr pB = NULL;
int rc = -1;
- static struct pci_dev *pci_dev_i = NULL;
+ struct pci_dev *pdev = NULL;
const struct firmware *fw = NULL;
if (poll_only) {
@@ -567,119 +552,108 @@ static int ip2_loadmain(void)
irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
}
- ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
/* process command line arguments to modprobe or
insmod i.e. iop & irqp */
/* irqp and iop should ALWAYS be specified now... But we check
them individually just to be sure, anyways... */
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
ip2config.addr[i] = io[i];
if (irq[i] >= 0)
ip2config.irq[i] = irq[i];
else
ip2config.irq[i] = 0;
- // This is a little bit of a hack. If poll_only=1 on command
- // line back in ip2.c OR all IRQs on all specified boards are
- // explicitly set to 0, then drop to poll only mode and override
- // PCI or EISA interrupts. This superceeds the old hack of
- // triggering if all interrupts were zero (like da default).
- // Still a hack but less prone to random acts of terrorism.
- //
- // What we really should do, now that the IRQ default is set
- // to -1, is to use 0 as a hard coded, do not probe.
- //
- // /\/\|=mhw=|\/\/
+ /* This is a little bit of a hack. If poll_only=1 on command
+ line back in ip2.c OR all IRQs on all specified boards are
+ explicitly set to 0, then drop to poll only mode and override
+ PCI or EISA interrupts. This superceeds the old hack of
+ triggering if all interrupts were zero (like da default).
+ Still a hack but less prone to random acts of terrorism.
+
+ What we really should do, now that the IRQ default is set
+ to -1, is to use 0 as a hard coded, do not probe.
+
+ /\/\|=mhw=|\/\/
+ */
poll_only |= irq[i];
}
poll_only = !poll_only;
/* Announce our presence */
- printk( KERN_INFO "%s version %s\n", pcName, pcVersion );
-
- // ip2 can be unloaded and reloaded for no good reason
- // we can't let that happen here or bad things happen
- // second load hoses board but not system - fixme later
- if (loaded) {
- printk( KERN_INFO "Still loaded\n" );
- return 0;
- }
- loaded++;
+ printk(KERN_INFO "%s version %s\n", pcName, pcVersion);
ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
if (!ip2_tty_driver)
return -ENOMEM;
- /* Initialise the iiEllis subsystem. */
- iiEllisInit();
-
/* Initialise all the boards we can find (up to the maximum). */
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- switch ( ip2config.addr[i] ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ switch (ip2config.addr[i]) {
case 0: /* skip this slot even if card is present */
break;
default: /* ISA */
/* ISA address must be specified */
- if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) {
- printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n",
- i, ip2config.addr[i] );
+ if (ip2config.addr[i] < 0x100 ||
+ ip2config.addr[i] > 0x3f8) {
+ printk(KERN_ERR "IP2: Bad ISA board %d "
+ "address %x\n", i,
+ ip2config.addr[i]);
ip2config.addr[i] = 0;
- } else {
- ip2config.type[i] = ISA;
-
- /* Check for valid irq argument, set for polling if invalid */
- if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) {
- printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]);
- ip2config.irq[i] = 0;// 0 is polling and is valid in that sense
- }
+ break;
+ }
+ ip2config.type[i] = ISA;
+
+ /* Check for valid irq argument, set for polling if
+ * invalid */
+ if (ip2config.irq[i] &&
+ !is_valid_irq(ip2config.irq[i])) {
+ printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",
+ ip2config.irq[i]);
+ /* 0 is polling and is valid in that sense */
+ ip2config.irq[i] = 0;
}
break;
case PCI:
#ifdef CONFIG_PCI
- {
- int status;
+ {
+ u32 addr;
+ int status;
- pci_dev_i = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
- PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
- if (pci_dev_i != NULL) {
- unsigned int addr;
-
- if (pci_enable_device(pci_dev_i)) {
- printk( KERN_ERR "IP2: can't enable PCI device at %s\n",
- pci_name(pci_dev_i));
- break;
- }
- ip2config.type[i] = PCI;
- ip2config.pci_dev[i] = pci_dev_get(pci_dev_i);
- status =
- pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr);
- if ( addr & 1 ) {
- ip2config.addr[i]=(USHORT)(addr&0xfffe);
- } else {
- printk( KERN_ERR "IP2: PCI I/O address error\n");
- }
+ pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
+ PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev);
+ if (pdev == NULL) {
+ ip2config.addr[i] = 0;
+ printk(KERN_ERR "IP2: PCI board %d not "
+ "found\n", i);
+ break;
+ }
-// If the PCI BIOS assigned it, lets try and use it. If we
-// can't acquire it or it screws up, deal with it then.
-
-// if (!is_valid_irq(pci_irq)) {
-// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq);
-// pci_irq = 0;
-// }
- ip2config.irq[i] = pci_dev_i->irq;
- } else { // ann error
- ip2config.addr[i] = 0;
- printk(KERN_ERR "IP2: PCI board %d not found\n", i);
- }
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "can't enable device\n");
+ break;
}
+ ip2config.type[i] = PCI;
+ ip2config.pci_dev[i] = pci_dev_get(pdev);
+ status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1,
+ &addr);
+ if (addr & 1)
+ ip2config.addr[i] = (USHORT)(addr & 0xfffe);
+ else
+ dev_err(&pdev->dev, "I/O address error\n");
+
+ ip2config.irq[i] = pdev->irq;
+ }
#else
- printk( KERN_ERR "IP2: PCI card specified but PCI support not\n");
- printk( KERN_ERR "IP2: configured in this kernel.\n");
- printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n");
+ printk(KERN_ERR "IP2: PCI card specified but PCI "
+ "support not enabled.\n");
+ printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI "
+ "defined!\n");
#endif /* CONFIG_PCI */
break;
case EISA:
- if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) {
+ ip2config.addr[i] = find_eisa_board(Eisa_slot + 1);
+ if (ip2config.addr[i] != 0) {
/* Eisa_irq set as side effect, boo */
ip2config.type[i] = EISA;
}
@@ -687,31 +661,32 @@ static int ip2_loadmain(void)
break;
} /* switch */
} /* for */
- if (pci_dev_i)
- pci_dev_put(pci_dev_i);
+ pci_dev_put(pdev);
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( ip2config.addr[i] ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ if (ip2config.addr[i]) {
pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL);
if (pB) {
i2BoardPtrTable[i] = pB;
- iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer );
- iiReset( pB );
- } else {
- printk(KERN_ERR "IP2: board memory allocation error\n");
- }
+ iiSetAddress(pB, ip2config.addr[i],
+ ii2DelayTimer);
+ iiReset(pB);
+ } else
+ printk(KERN_ERR "IP2: board memory allocation "
+ "error\n");
}
}
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( ( pB = i2BoardPtrTable[i] ) != NULL ) {
- iiResetDelay( pB );
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ pB = i2BoardPtrTable[i];
+ if (pB != NULL) {
+ iiResetDelay(pB);
break;
}
}
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
/* We don't want to request the firmware unless we have at
least one board */
- if ( i2BoardPtrTable[i] != NULL ) {
+ if (i2BoardPtrTable[i] != NULL) {
if (!fw)
fw = ip2_request_firmware();
if (!fw)
@@ -722,7 +697,7 @@ static int ip2_loadmain(void)
if (fw)
release_firmware(fw);
- ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 );
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0);
ip2_tty_driver->owner = THIS_MODULE;
ip2_tty_driver->name = "ttyF";
@@ -733,20 +708,23 @@ static int ip2_loadmain(void)
ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
ip2_tty_driver->init_termios = tty_std_termios;
ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
- ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(ip2_tty_driver, &ip2_ops);
- ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 );
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0);
- /* Register the tty devices. */
- if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) {
- printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err);
+ err = tty_register_driver(ip2_tty_driver);
+ if (err) {
+ printk(KERN_ERR "IP2: failed to register tty driver\n");
put_tty_driver(ip2_tty_driver);
- return -EINVAL;
- } else
- /* Register the IPL driver. */
- if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) {
- printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err );
+ return err; /* leaking resources */
+ }
+
+ err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl);
+ if (err) {
+ printk(KERN_ERR "IP2: failed to register IPL device (%d)\n",
+ err);
} else {
/* create the sysfs class */
ip2_class = class_create(THIS_MODULE, "ip2");
@@ -758,82 +736,85 @@ static int ip2_loadmain(void)
/* Register the read_procmem thing */
if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) {
printk(KERN_ERR "IP2: failed to register read_procmem\n");
- } else {
+ return -EIO; /* leaking resources */
+ }
- ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 );
- /* Register the interrupt handler or poll handler, depending upon the
- * specified interrupt.
- */
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0);
+ /* Register the interrupt handler or poll handler, depending upon the
+ * specified interrupt.
+ */
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( 0 == ip2config.addr[i] ) {
- continue;
- }
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ if (ip2config.addr[i] == 0)
+ continue;
- if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
- device_create_drvdata(ip2_class, NULL,
- MKDEV(IP2_IPL_MAJOR, 4 * i),
- NULL, "ipl%d", i);
- device_create_drvdata(ip2_class, NULL,
- MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
- NULL, "stat%d", i);
-
- for ( box = 0; box < ABS_MAX_BOXES; ++box )
- {
- for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
- {
- if ( pB->i2eChannelMap[box] & (1 << j) )
- {
- tty_register_device(ip2_tty_driver,
- j + ABS_BIGGEST_BOX *
- (box+i*ABS_MAX_BOXES), NULL);
- }
- }
- }
- }
+ pB = i2BoardPtrTable[i];
+ if (pB != NULL) {
+ device_create_drvdata(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i),
+ NULL, "ipl%d", i);
+ device_create_drvdata(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
+ NULL, "stat%d", i);
+
+ for (box = 0; box < ABS_MAX_BOXES; box++)
+ for (j = 0; j < ABS_BIGGEST_BOX; j++)
+ if (pB->i2eChannelMap[box] & (1 << j))
+ tty_register_device(
+ ip2_tty_driver,
+ j + ABS_BIGGEST_BOX *
+ (box+i*ABS_MAX_BOXES),
+ NULL);
+ }
- if (poll_only) {
-// Poll only forces driver to only use polling and
-// to ignore the probed PCI or EISA interrupts.
- ip2config.irq[i] = CIR_POLL;
- }
- if ( ip2config.irq[i] == CIR_POLL ) {
+ if (poll_only) {
+ /* Poll only forces driver to only use polling and
+ to ignore the probed PCI or EISA interrupts. */
+ ip2config.irq[i] = CIR_POLL;
+ }
+ if (ip2config.irq[i] == CIR_POLL) {
retry:
- if (!TimerOn) {
- PollTimer.expires = POLL_TIMEOUT;
- add_timer ( &PollTimer );
- TimerOn = 1;
- printk( KERN_INFO "IP2: polling\n");
- }
- } else {
- if (have_requested_irq(ip2config.irq[i]))
- continue;
- rc = request_irq( ip2config.irq[i], ip2_interrupt,
- IP2_SA_FLAGS | (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
- pcName, i2BoardPtrTable[i]);
- if (rc) {
- printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);
- ip2config.irq[i] = CIR_POLL;
- printk( KERN_INFO "IP2: Polling %ld/sec.\n",
- (POLL_TIMEOUT - jiffies));
- goto retry;
- }
- mark_requested_irq(ip2config.irq[i]);
- /* Initialise the interrupt handler bottom half (aka slih). */
+ if (!TimerOn) {
+ PollTimer.expires = POLL_TIMEOUT;
+ add_timer(&PollTimer);
+ TimerOn = 1;
+ printk(KERN_INFO "IP2: polling\n");
}
- }
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( i2BoardPtrTable[i] ) {
- set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */
+ } else {
+ if (have_requested_irq(ip2config.irq[i]))
+ continue;
+ rc = request_irq(ip2config.irq[i], ip2_interrupt,
+ IP2_SA_FLAGS |
+ (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
+ pcName, i2BoardPtrTable[i]);
+ if (rc) {
+ printk(KERN_ERR "IP2: request_irq failed: "
+ "error %d\n", rc);
+ ip2config.irq[i] = CIR_POLL;
+ printk(KERN_INFO "IP2: Polling %ld/sec.\n",
+ (POLL_TIMEOUT - jiffies));
+ goto retry;
}
+ mark_requested_irq(ip2config.irq[i]);
+ /* Initialise the interrupt handler bottom half
+ * (aka slih). */
}
}
- ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 );
- goto out;
+
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ if (i2BoardPtrTable[i]) {
+ /* set and enable board interrupt */
+ set_irq(i, ip2config.irq[i]);
+ }
+ }
+
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0);
+
+ return 0;
out_chrdev:
unregister_chrdev(IP2_IPL_MAJOR, "ip2");
-out:
+ /* unregister and put tty here */
return err;
}
module_init(ip2_loadmain);
From: Akinobu Mita <[email protected]>
add_timer() is not suppose to be called when the timer is pending.
ip2 driver attempts to avoid that condition by setting and resetting
a flag (TimerOn) in timer function. But there is some gap between
add_timer() and setting TimerOn.
This patch fix this problem by using mod_timer() and remove TimerOn
which has been unnecessary by this change.
Signed-off-by: Akinobu Mita <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/ip2/ip2main.c | 19 ++++---------------
1 files changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 39269d1..66f52a2 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -249,7 +249,6 @@ static unsigned long bh_counter;
*/
#define POLL_TIMEOUT (jiffies + 1)
static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
-static char TimerOn;
#ifdef IP2DEBUG_TRACE
/* Trace (debug) buffer data */
@@ -374,11 +373,7 @@ static void __exit ip2_cleanup_module(void)
int err;
int i;
- /* Stop poll timer if we had one. */
- if (TimerOn) {
- del_timer(&PollTimer);
- TimerOn = 0;
- }
+ del_timer_sync(&PollTimer);
/* Reset the boards we have. */
for (i = 0; i < IP2_MAX_BOARDS; i++)
@@ -774,10 +769,8 @@ static int __init ip2_loadmain(void)
}
if (ip2config.irq[i] == CIR_POLL) {
retry:
- if (!TimerOn) {
- PollTimer.expires = POLL_TIMEOUT;
- add_timer(&PollTimer);
- TimerOn = 1;
+ if (!timer_pending(&PollTimer)) {
+ mod_timer(&PollTimer, POLL_TIMEOUT);
printk(KERN_INFO "IP2: polling\n");
}
} else {
@@ -1283,16 +1276,12 @@ ip2_poll(unsigned long arg)
{
ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
- TimerOn = 0; // it's the truth but not checked in service
-
// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
// It will NOT poll boards handled by hard interrupts.
// The issue of queued BH interrupts is handled in ip2_interrupt().
ip2_polled_interrupt();
- PollTimer.expires = POLL_TIMEOUT;
- add_timer( &PollTimer );
- TimerOn = 1;
+ mod_timer(&PollTimer, POLL_TIMEOUT);
ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
}
From: Miloslav Trmac <[email protected]>
Data read from a TTY can contain an embedded NUL byte (e.g. after
pressing Ctrl-2, or sent to a PTY). After the previous patch, the data
would be logged only up to the first NUL.
This patch modifies the AUDIT_TTY record to always use the hexadecimal
format, which does not terminate at the first NUL byte. The vast
majority of recorded TTY input data will contain either ' ' or '\n', so
the hexadecimal format would have been used anyway.
Signed-off-by: Miloslav Trmac <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_audit.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 3582f43..5787249 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -93,7 +93,7 @@ static void tty_audit_buf_push(struct task_struct *tsk, uid_t loginuid,
get_task_comm(name, tsk);
audit_log_untrustedstring(ab, name);
audit_log_format(ab, " data=");
- audit_log_n_untrustedstring(ab, buf->data, buf->valid);
+ audit_log_n_hex(ab, buf->data, buf->valid);
audit_log_end(ab);
}
buf->valid = 0;
From: David Miller <[email protected]>
Otherwise the top 32-bits of the resource value get chopped
off on 64-bit systems, and the resulting I/O accesses go to
random places.
Thanks to testing and debugging by Josip Rodin, which helped
track this down.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
include/linux/serial_core.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 3b2f6c0..e27f216 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -241,7 +241,7 @@ typedef unsigned int __bitwise__ upf_t;
struct uart_port {
spinlock_t lock; /* port lock */
- unsigned int iobase; /* in/out[bwl] */
+ unsigned long iobase; /* in/out[bwl] */
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int irq; /* irq number */
unsigned int uartclk; /* base uart clock */
The two are basically independent chunks of code so lets split them up for
readability and sanity. It also makes the API boundaries much clearer.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/Makefile | 2
drivers/char/tty_buffer.c | 511 +++++++++++++++++++++++++++++++++++++++++++++
drivers/char/tty_io.c | 502 --------------------------------------------
include/linux/tty.h | 3
4 files changed, 515 insertions(+), 503 deletions(-)
create mode 100644 drivers/char/tty_buffer.c
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 6850f6d..77ea41b 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -7,7 +7,7 @@
#
FONTMAPFILE = cp437.uni
-obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o
+obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
new file mode 100644
index 0000000..810ee25
--- /dev/null
+++ b/drivers/char/tty_buffer.c
@@ -0,0 +1,511 @@
+/*
+ * Tty buffer allocation management
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+/**
+ * tty_buffer_free_all - free buffers used by a tty
+ * @tty: tty to free from
+ *
+ * Remove all the buffers pending on a tty whether queued with data
+ * or in the free ring. Must be called when the tty is no longer in use
+ *
+ * Locking: none
+ */
+
+void tty_buffer_free_all(struct tty_struct *tty)
+{
+ struct tty_buffer *thead;
+ while ((thead = tty->buf.head) != NULL) {
+ tty->buf.head = thead->next;
+ kfree(thead);
+ }
+ while ((thead = tty->buf.free) != NULL) {
+ tty->buf.free = thead->next;
+ kfree(thead);
+ }
+ tty->buf.tail = NULL;
+ tty->buf.memory_used = 0;
+}
+
+/**
+ * tty_buffer_alloc - allocate a tty buffer
+ * @tty: tty device
+ * @size: desired size (characters)
+ *
+ * Allocate a new tty buffer to hold the desired number of characters.
+ * Return NULL if out of memory or the allocation would exceed the
+ * per device queue
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer *p;
+
+ if (tty->buf.memory_used + size > 65536)
+ return NULL;
+ p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
+ if (p == NULL)
+ return NULL;
+ p->used = 0;
+ p->size = size;
+ p->next = NULL;
+ p->commit = 0;
+ p->read = 0;
+ p->char_buf_ptr = (char *)(p->data);
+ p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
+ tty->buf.memory_used += size;
+ return p;
+}
+
+/**
+ * tty_buffer_free - free a tty buffer
+ * @tty: tty owning the buffer
+ * @b: the buffer to free
+ *
+ * Free a tty buffer, or add it to the free list according to our
+ * internal strategy
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+{
+ /* Dumb strategy for now - should keep some stats */
+ tty->buf.memory_used -= b->size;
+ WARN_ON(tty->buf.memory_used < 0);
+
+ if (b->size >= 512)
+ kfree(b);
+ else {
+ b->next = tty->buf.free;
+ tty->buf.free = b;
+ }
+}
+
+/**
+ * __tty_buffer_flush - flush full tty buffers
+ * @tty: tty to flush
+ *
+ * flush all the buffers containing receive data. Caller must
+ * hold the buffer lock and must have ensured no parallel flush to
+ * ldisc is running.
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static void __tty_buffer_flush(struct tty_struct *tty)
+{
+ struct tty_buffer *thead;
+
+ while ((thead = tty->buf.head) != NULL) {
+ tty->buf.head = thead->next;
+ tty_buffer_free(tty, thead);
+ }
+ tty->buf.tail = NULL;
+}
+
+/**
+ * tty_buffer_flush - flush full tty buffers
+ * @tty: tty to flush
+ *
+ * flush all the buffers containing receive data. If the buffer is
+ * being processed by flush_to_ldisc then we defer the processing
+ * to that function
+ *
+ * Locking: none
+ */
+
+void tty_buffer_flush(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+
+ /* If the data is being pushed to the tty layer then we can't
+ process it here. Instead set a flag and the flush_to_ldisc
+ path will process the flush request before it exits */
+ if (test_bit(TTY_FLUSHING, &tty->flags)) {
+ set_bit(TTY_FLUSHPENDING, &tty->flags);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ wait_event(tty->read_wait,
+ test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+ return;
+ } else
+ __tty_buffer_flush(tty);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+}
+
+/**
+ * tty_buffer_find - find a free tty buffer
+ * @tty: tty owning the buffer
+ * @size: characters wanted
+ *
+ * Locate an existing suitable tty buffer or if we are lacking one then
+ * allocate a new one. We round our buffers off in 256 character chunks
+ * to get better allocation behaviour.
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer **tbh = &tty->buf.free;
+ while ((*tbh) != NULL) {
+ struct tty_buffer *t = *tbh;
+ if (t->size >= size) {
+ *tbh = t->next;
+ t->next = NULL;
+ t->used = 0;
+ t->commit = 0;
+ t->read = 0;
+ tty->buf.memory_used += t->size;
+ return t;
+ }
+ tbh = &((*tbh)->next);
+ }
+ /* Round the buffer size out */
+ size = (size + 0xFF) & ~0xFF;
+ return tty_buffer_alloc(tty, size);
+ /* Should possibly check if this fails for the largest buffer we
+ have queued and recycle that ? */
+}
+
+/**
+ * tty_buffer_request_room - grow tty buffer if needed
+ * @tty: tty structure
+ * @size: size desired
+ *
+ * Make at least size bytes of linear space available for the tty
+ * buffer. If we fail return the size we managed to find.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer *b, *n;
+ int left;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+
+ /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
+ remove this conditional if its worth it. This would be invisible
+ to the callers */
+ if ((b = tty->buf.tail) != NULL)
+ left = b->size - b->used;
+ else
+ left = 0;
+
+ if (left < size) {
+ /* This is the slow path - looking for new buffers to use */
+ if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if (b != NULL) {
+ b->next = n;
+ b->commit = b->used;
+ } else
+ tty->buf.head = n;
+ tty->buf.tail = n;
+ } else
+ size = left;
+ }
+
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ return size;
+}
+EXPORT_SYMBOL_GPL(tty_buffer_request_room);
+
+/**
+ * tty_insert_flip_string - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. All the characters
+ * passed are marked as without error. Returns the number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
+int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
+ size_t size)
+{
+ int copied = 0;
+ do {
+ int space = tty_buffer_request_room(tty, size - copied);
+ struct tty_buffer *tb = tty->buf.tail;
+ /* If there is no space then tb may be NULL */
+ if (unlikely(space == 0))
+ break;
+ memcpy(tb->char_buf_ptr + tb->used, chars, space);
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ copied += space;
+ chars += space;
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ } while (unlikely(size > copied));
+ return copied;
+}
+EXPORT_SYMBOL(tty_insert_flip_string);
+
+/**
+ * tty_insert_flip_string_flags - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @flags: flag bytes
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. For each character
+ * the flags array indicates the status of the character. Returns the
+ * number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
+int tty_insert_flip_string_flags(struct tty_struct *tty,
+ const unsigned char *chars, const char *flags, size_t size)
+{
+ int copied = 0;
+ do {
+ int space = tty_buffer_request_room(tty, size - copied);
+ struct tty_buffer *tb = tty->buf.tail;
+ /* If there is no space then tb may be NULL */
+ if (unlikely(space == 0))
+ break;
+ memcpy(tb->char_buf_ptr + tb->used, chars, space);
+ memcpy(tb->flag_buf_ptr + tb->used, flags, space);
+ tb->used += space;
+ copied += space;
+ chars += space;
+ flags += space;
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ } while (unlikely(size > copied));
+ return copied;
+}
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
+
+/**
+ * tty_schedule_flip - push characters to ldisc
+ * @tty: tty to push from
+ *
+ * Takes any pending buffers and transfers their ownership to the
+ * ldisc side of the queue. It then schedules those characters for
+ * processing by the line discipline.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+
+void tty_schedule_flip(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->commit = tty->buf.tail->used;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ schedule_delayed_work(&tty->buf.work, 1);
+}
+EXPORT_SYMBOL(tty_schedule_flip);
+
+/**
+ * tty_prepare_flip_string - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @size: desired size
+ *
+ * Prepare a block of space in the buffer for data. Returns the length
+ * available and buffer pointer to the space which is now allocated and
+ * accounted for as ready for normal characters. This is used for drivers
+ * that need their own block copy routines into the buffer. There is no
+ * guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
+ */
+
+int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
+ size_t size)
+{
+ int space = tty_buffer_request_room(tty, size);
+ if (likely(space)) {
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ }
+ return space;
+}
+EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
+
+/**
+ * tty_prepare_flip_string_flags - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @flags: return pointer for status flag write area
+ * @size: desired size
+ *
+ * Prepare a block of space in the buffer for data. Returns the length
+ * available and buffer pointer to the space which is now allocated and
+ * accounted for as ready for characters. This is used for drivers
+ * that need their own block copy routines into the buffer. There is no
+ * guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
+ */
+
+int tty_prepare_flip_string_flags(struct tty_struct *tty,
+ unsigned char **chars, char **flags, size_t size)
+{
+ int space = tty_buffer_request_room(tty, size);
+ if (likely(space)) {
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ *flags = tb->flag_buf_ptr + tb->used;
+ tb->used += space;
+ }
+ return space;
+}
+EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
+
+
+
+/**
+ * flush_to_ldisc
+ * @work: tty structure passed from work queue.
+ *
+ * This routine is called out of the software interrupt to flush data
+ * from the buffer chain to the line discipline.
+ *
+ * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
+ * while invoking the line discipline receive_buf method. The
+ * receive_buf method is single threaded for each tty instance.
+ */
+
+static void flush_to_ldisc(struct work_struct *work)
+{
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, buf.work.work);
+ unsigned long flags;
+ struct tty_ldisc *disc;
+ struct tty_buffer *tbuf, *head;
+ char *char_buf;
+ unsigned char *flag_buf;
+
+ disc = tty_ldisc_ref(tty);
+ if (disc == NULL) /* !TTY_LDISC */
+ return;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ /* So we know a flush is running */
+ set_bit(TTY_FLUSHING, &tty->flags);
+ head = tty->buf.head;
+ if (head != NULL) {
+ tty->buf.head = NULL;
+ for (;;) {
+ int count = head->commit - head->read;
+ if (!count) {
+ if (head->next == NULL)
+ break;
+ tbuf = head;
+ head = head->next;
+ tty_buffer_free(tty, tbuf);
+ continue;
+ }
+ /* Ldisc or user is trying to flush the buffers
+ we are feeding to the ldisc, stop feeding the
+ line discipline as we want to empty the queue */
+ if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+ break;
+ if (!tty->receive_room) {
+ schedule_delayed_work(&tty->buf.work, 1);
+ break;
+ }
+ if (count > tty->receive_room)
+ count = tty->receive_room;
+ char_buf = head->char_buf_ptr + head->read;
+ flag_buf = head->flag_buf_ptr + head->read;
+ head->read += count;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ disc->ops->receive_buf(tty, char_buf,
+ flag_buf, count);
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ }
+ /* Restore the queue head */
+ tty->buf.head = head;
+ }
+ /* We may have a deferred request to flush the input buffer,
+ if so pull the chain under the lock and empty the queue */
+ if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
+ __tty_buffer_flush(tty);
+ clear_bit(TTY_FLUSHPENDING, &tty->flags);
+ wake_up(&tty->read_wait);
+ }
+ clear_bit(TTY_FLUSHING, &tty->flags);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ tty_ldisc_deref(disc);
+}
+
+/**
+ * tty_flip_buffer_push - terminal
+ * @tty: tty to push
+ *
+ * Queue a push of the terminal flip buffers to the line discipline. This
+ * function must not be called from IRQ context if tty->low_latency is set.
+ *
+ * In the event of the queue being busy for flipping the work will be
+ * held off and retried later.
+ *
+ * Locking: tty buffer lock. Driver locks in low latency mode.
+ */
+
+void tty_flip_buffer_push(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->commit = tty->buf.tail->used;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ if (tty->low_latency)
+ flush_to_ldisc(&tty->buf.work.work);
+ else
+ schedule_delayed_work(&tty->buf.work, 1);
+}
+EXPORT_SYMBOL(tty_flip_buffer_push);
+
+/**
+ * tty_buffer_init - prepare a tty buffer structure
+ * @tty: tty to initialise
+ *
+ * Set up the initial state of the buffer management for a tty device.
+ * Must be called before the other tty buffer functions are used.
+ *
+ * Locking: none
+ */
+
+void tty_buffer_init(struct tty_struct *tty)
+{
+ spin_lock_init(&tty->buf.lock);
+ tty->buf.head = NULL;
+ tty->buf.tail = NULL;
+ tty->buf.free = NULL;
+ tty->buf.memory_used = 0;
+ INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc);
+}
+
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 2f05728..3a72693 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -176,8 +176,6 @@ static struct tty_struct *alloc_tty_struct(void)
return kzalloc(sizeof(struct tty_struct), GFP_KERNEL);
}
-static void tty_buffer_free_all(struct tty_struct *);
-
/**
* free_tty_struct - free a disused tty
* @tty: tty struct to free
@@ -263,398 +261,6 @@ static int check_tty_count(struct tty_struct *tty, const char *routine)
return 0;
}
-/*
- * Tty buffer allocation management
- */
-
-/**
- * tty_buffer_free_all - free buffers used by a tty
- * @tty: tty to free from
- *
- * Remove all the buffers pending on a tty whether queued with data
- * or in the free ring. Must be called when the tty is no longer in use
- *
- * Locking: none
- */
-
-static void tty_buffer_free_all(struct tty_struct *tty)
-{
- struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- kfree(thead);
- }
- while ((thead = tty->buf.free) != NULL) {
- tty->buf.free = thead->next;
- kfree(thead);
- }
- tty->buf.tail = NULL;
- tty->buf.memory_used = 0;
-}
-
-/**
- * tty_buffer_init - prepare a tty buffer structure
- * @tty: tty to initialise
- *
- * Set up the initial state of the buffer management for a tty device.
- * Must be called before the other tty buffer functions are used.
- *
- * Locking: none
- */
-
-static void tty_buffer_init(struct tty_struct *tty)
-{
- spin_lock_init(&tty->buf.lock);
- tty->buf.head = NULL;
- tty->buf.tail = NULL;
- tty->buf.free = NULL;
- tty->buf.memory_used = 0;
-}
-
-/**
- * tty_buffer_alloc - allocate a tty buffer
- * @tty: tty device
- * @size: desired size (characters)
- *
- * Allocate a new tty buffer to hold the desired number of characters.
- * Return NULL if out of memory or the allocation would exceed the
- * per device queue
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
-{
- struct tty_buffer *p;
-
- if (tty->buf.memory_used + size > 65536)
- return NULL;
- p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
- if (p == NULL)
- return NULL;
- p->used = 0;
- p->size = size;
- p->next = NULL;
- p->commit = 0;
- p->read = 0;
- p->char_buf_ptr = (char *)(p->data);
- p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
- tty->buf.memory_used += size;
- return p;
-}
-
-/**
- * tty_buffer_free - free a tty buffer
- * @tty: tty owning the buffer
- * @b: the buffer to free
- *
- * Free a tty buffer, or add it to the free list according to our
- * internal strategy
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
-{
- /* Dumb strategy for now - should keep some stats */
- tty->buf.memory_used -= b->size;
- WARN_ON(tty->buf.memory_used < 0);
-
- if (b->size >= 512)
- kfree(b);
- else {
- b->next = tty->buf.free;
- tty->buf.free = b;
- }
-}
-
-/**
- * __tty_buffer_flush - flush full tty buffers
- * @tty: tty to flush
- *
- * flush all the buffers containing receive data. Caller must
- * hold the buffer lock and must have ensured no parallel flush to
- * ldisc is running.
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static void __tty_buffer_flush(struct tty_struct *tty)
-{
- struct tty_buffer *thead;
-
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- tty_buffer_free(tty, thead);
- }
- tty->buf.tail = NULL;
-}
-
-/**
- * tty_buffer_flush - flush full tty buffers
- * @tty: tty to flush
- *
- * flush all the buffers containing receive data. If the buffer is
- * being processed by flush_to_ldisc then we defer the processing
- * to that function
- *
- * Locking: none
- */
-
-static void tty_buffer_flush(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
-
- /* If the data is being pushed to the tty layer then we can't
- process it here. Instead set a flag and the flush_to_ldisc
- path will process the flush request before it exits */
- if (test_bit(TTY_FLUSHING, &tty->flags)) {
- set_bit(TTY_FLUSHPENDING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- wait_event(tty->read_wait,
- test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
- return;
- } else
- __tty_buffer_flush(tty);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
-}
-
-/**
- * tty_buffer_find - find a free tty buffer
- * @tty: tty owning the buffer
- * @size: characters wanted
- *
- * Locate an existing suitable tty buffer or if we are lacking one then
- * allocate a new one. We round our buffers off in 256 character chunks
- * to get better allocation behaviour.
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
-{
- struct tty_buffer **tbh = &tty->buf.free;
- while ((*tbh) != NULL) {
- struct tty_buffer *t = *tbh;
- if (t->size >= size) {
- *tbh = t->next;
- t->next = NULL;
- t->used = 0;
- t->commit = 0;
- t->read = 0;
- tty->buf.memory_used += t->size;
- return t;
- }
- tbh = &((*tbh)->next);
- }
- /* Round the buffer size out */
- size = (size + 0xFF) & ~0xFF;
- return tty_buffer_alloc(tty, size);
- /* Should possibly check if this fails for the largest buffer we
- have queued and recycle that ? */
-}
-
-/**
- * tty_buffer_request_room - grow tty buffer if needed
- * @tty: tty structure
- * @size: size desired
- *
- * Make at least size bytes of linear space available for the tty
- * buffer. If we fail return the size we managed to find.
- *
- * Locking: Takes tty->buf.lock
- */
-int tty_buffer_request_room(struct tty_struct *tty, size_t size)
-{
- struct tty_buffer *b, *n;
- int left;
- unsigned long flags;
-
- spin_lock_irqsave(&tty->buf.lock, flags);
-
- /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
- remove this conditional if its worth it. This would be invisible
- to the callers */
- if ((b = tty->buf.tail) != NULL)
- left = b->size - b->used;
- else
- left = 0;
-
- if (left < size) {
- /* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(tty, size)) != NULL) {
- if (b != NULL) {
- b->next = n;
- b->commit = b->used;
- } else
- tty->buf.head = n;
- tty->buf.tail = n;
- } else
- size = left;
- }
-
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- return size;
-}
-EXPORT_SYMBOL_GPL(tty_buffer_request_room);
-
-/**
- * tty_insert_flip_string - Add characters to the tty buffer
- * @tty: tty structure
- * @chars: characters
- * @size: size
- *
- * Queue a series of bytes to the tty buffering. All the characters
- * passed are marked as without error. Returns the number added.
- *
- * Locking: Called functions may take tty->buf.lock
- */
-
-int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
- size_t size)
-{
- int copied = 0;
- do {
- int space = tty_buffer_request_room(tty, size - copied);
- struct tty_buffer *tb = tty->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0))
- break;
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
- tb->used += space;
- copied += space;
- chars += space;
- /* There is a small chance that we need to split the data over
- several buffers. If this is the case we must loop */
- } while (unlikely(size > copied));
- return copied;
-}
-EXPORT_SYMBOL(tty_insert_flip_string);
-
-/**
- * tty_insert_flip_string_flags - Add characters to the tty buffer
- * @tty: tty structure
- * @chars: characters
- * @flags: flag bytes
- * @size: size
- *
- * Queue a series of bytes to the tty buffering. For each character
- * the flags array indicates the status of the character. Returns the
- * number added.
- *
- * Locking: Called functions may take tty->buf.lock
- */
-
-int tty_insert_flip_string_flags(struct tty_struct *tty,
- const unsigned char *chars, const char *flags, size_t size)
-{
- int copied = 0;
- do {
- int space = tty_buffer_request_room(tty, size - copied);
- struct tty_buffer *tb = tty->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0))
- break;
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memcpy(tb->flag_buf_ptr + tb->used, flags, space);
- tb->used += space;
- copied += space;
- chars += space;
- flags += space;
- /* There is a small chance that we need to split the data over
- several buffers. If this is the case we must loop */
- } while (unlikely(size > copied));
- return copied;
-}
-EXPORT_SYMBOL(tty_insert_flip_string_flags);
-
-/**
- * tty_schedule_flip - push characters to ldisc
- * @tty: tty to push from
- *
- * Takes any pending buffers and transfers their ownership to the
- * ldisc side of the queue. It then schedules those characters for
- * processing by the line discipline.
- *
- * Locking: Takes tty->buf.lock
- */
-
-void tty_schedule_flip(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- schedule_delayed_work(&tty->buf.work, 1);
-}
-EXPORT_SYMBOL(tty_schedule_flip);
-
-/**
- * tty_prepare_flip_string - make room for characters
- * @tty: tty
- * @chars: return pointer for character write area
- * @size: desired size
- *
- * Prepare a block of space in the buffer for data. Returns the length
- * available and buffer pointer to the space which is now allocated and
- * accounted for as ready for normal characters. This is used for drivers
- * that need their own block copy routines into the buffer. There is no
- * guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking tty->buf.lock
- */
-
-int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
- size_t size)
-{
- int space = tty_buffer_request_room(tty, size);
- if (likely(space)) {
- struct tty_buffer *tb = tty->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
- tb->used += space;
- }
- return space;
-}
-
-EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
-
-/**
- * tty_prepare_flip_string_flags - make room for characters
- * @tty: tty
- * @chars: return pointer for character write area
- * @flags: return pointer for status flag write area
- * @size: desired size
- *
- * Prepare a block of space in the buffer for data. Returns the length
- * available and buffer pointer to the space which is now allocated and
- * accounted for as ready for characters. This is used for drivers
- * that need their own block copy routines into the buffer. There is no
- * guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking tty->buf.lock
- */
-
-int tty_prepare_flip_string_flags(struct tty_struct *tty,
- unsigned char **chars, char **flags, size_t size)
-{
- int space = tty_buffer_request_room(tty, size);
- if (likely(space)) {
- struct tty_buffer *tb = tty->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- *flags = tb->flag_buf_ptr + tb->used;
- tb->used += space;
- }
- return space;
-}
-
-EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
-
-
-
/**
* get_tty_driver - find device of a tty
* @dev_t: device identifier
@@ -3216,113 +2822,6 @@ void do_SAK(struct tty_struct *tty)
EXPORT_SYMBOL(do_SAK);
/**
- * flush_to_ldisc
- * @work: tty structure passed from work queue.
- *
- * This routine is called out of the software interrupt to flush data
- * from the buffer chain to the line discipline.
- *
- * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
- * while invoking the line discipline receive_buf method. The
- * receive_buf method is single threaded for each tty instance.
- */
-
-static void flush_to_ldisc(struct work_struct *work)
-{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, buf.work.work);
- unsigned long flags;
- struct tty_ldisc *disc;
- struct tty_buffer *tbuf, *head;
- char *char_buf;
- unsigned char *flag_buf;
-
- disc = tty_ldisc_ref(tty);
- if (disc == NULL) /* !TTY_LDISC */
- return;
-
- spin_lock_irqsave(&tty->buf.lock, flags);
- /* So we know a flush is running */
- set_bit(TTY_FLUSHING, &tty->flags);
- head = tty->buf.head;
- if (head != NULL) {
- tty->buf.head = NULL;
- for (;;) {
- int count = head->commit - head->read;
- if (!count) {
- if (head->next == NULL)
- break;
- tbuf = head;
- head = head->next;
- tty_buffer_free(tty, tbuf);
- continue;
- }
- /* Ldisc or user is trying to flush the buffers
- we are feeding to the ldisc, stop feeding the
- line discipline as we want to empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags))
- break;
- if (!tty->receive_room) {
- schedule_delayed_work(&tty->buf.work, 1);
- break;
- }
- if (count > tty->receive_room)
- count = tty->receive_room;
- char_buf = head->char_buf_ptr + head->read;
- flag_buf = head->flag_buf_ptr + head->read;
- head->read += count;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- disc->ops->receive_buf(tty, char_buf,
- flag_buf, count);
- spin_lock_irqsave(&tty->buf.lock, flags);
- }
- /* Restore the queue head */
- tty->buf.head = head;
- }
- /* We may have a deferred request to flush the input buffer,
- if so pull the chain under the lock and empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
- __tty_buffer_flush(tty);
- clear_bit(TTY_FLUSHPENDING, &tty->flags);
- wake_up(&tty->read_wait);
- }
- clear_bit(TTY_FLUSHING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
-
- tty_ldisc_deref(disc);
-}
-
-/**
- * tty_flip_buffer_push - terminal
- * @tty: tty to push
- *
- * Queue a push of the terminal flip buffers to the line discipline. This
- * function must not be called from IRQ context if tty->low_latency is set.
- *
- * In the event of the queue being busy for flipping the work will be
- * held off and retried later.
- *
- * Locking: tty buffer lock. Driver locks in low latency mode.
- */
-
-void tty_flip_buffer_push(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
-
- if (tty->low_latency)
- flush_to_ldisc(&tty->buf.work.work);
- else
- schedule_delayed_work(&tty->buf.work, 1);
-}
-
-EXPORT_SYMBOL(tty_flip_buffer_push);
-
-
-/**
* initialize_tty_struct
* @tty: tty to initialize
*
@@ -3342,7 +2841,6 @@ static void initialize_tty_struct(struct tty_struct *tty)
tty->overrun_time = jiffies;
tty->buf.head = tty->buf.tail = NULL;
tty_buffer_init(tty);
- INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc);
mutex_init(&tty->termios_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 0cbec74..7271c62 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -347,6 +347,9 @@ extern void __do_SAK(struct tty_struct *tty);
extern void disassociate_ctty(int priv);
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_flush(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_struct *tty);
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
Not much in it yet but this will grow a lot
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/Makefile | 2 +-
drivers/char/tty_io.c | 36 -------------------------------
drivers/char/tty_port.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 56 insertions(+), 37 deletions(-)
create mode 100644 drivers/char/tty_port.c
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 77ea41b..1a4247d 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -7,7 +7,7 @@
#
FONTMAPFILE = cp437.uni
-obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o
+obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 3a72693..7323168 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1139,42 +1139,6 @@ ssize_t redirected_tty_write(struct file *file, const char __user *buf,
return tty_write(file, buf, count, ppos);
}
-void tty_port_init(struct tty_port *port)
-{
- memset(port, 0, sizeof(*port));
- init_waitqueue_head(&port->open_wait);
- init_waitqueue_head(&port->close_wait);
- mutex_init(&port->mutex);
- port->close_delay = (50 * HZ) / 100;
- port->closing_wait = (3000 * HZ) / 100;
-}
-EXPORT_SYMBOL(tty_port_init);
-
-int tty_port_alloc_xmit_buf(struct tty_port *port)
-{
- /* We may sleep in get_zeroed_page() */
- mutex_lock(&port->mutex);
- if (port->xmit_buf == NULL)
- port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
- mutex_unlock(&port->mutex);
- if (port->xmit_buf == NULL)
- return -ENOMEM;
- return 0;
-}
-EXPORT_SYMBOL(tty_port_alloc_xmit_buf);
-
-void tty_port_free_xmit_buf(struct tty_port *port)
-{
- mutex_lock(&port->mutex);
- if (port->xmit_buf != NULL) {
- free_page((unsigned long)port->xmit_buf);
- port->xmit_buf = NULL;
- }
- mutex_unlock(&port->mutex);
-}
-EXPORT_SYMBOL(tty_port_free_xmit_buf);
-
-
static char ptychar[] = "pqrstuvwxyzabcde";
/**
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
new file mode 100644
index 0000000..6fadb19
--- /dev/null
+++ b/drivers/char/tty_port.c
@@ -0,0 +1,55 @@
+/*
+ * Tty port functions
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+void tty_port_init(struct tty_port *port)
+{
+ memset(port, 0, sizeof(*port));
+ init_waitqueue_head(&port->open_wait);
+ init_waitqueue_head(&port->close_wait);
+ mutex_init(&port->mutex);
+ port->close_delay = (50 * HZ) / 100;
+ port->closing_wait = (3000 * HZ) / 100;
+}
+EXPORT_SYMBOL(tty_port_init);
+
+int tty_port_alloc_xmit_buf(struct tty_port *port)
+{
+ /* We may sleep in get_zeroed_page() */
+ mutex_lock(&port->mutex);
+ if (port->xmit_buf == NULL)
+ port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
+ mutex_unlock(&port->mutex);
+ if (port->xmit_buf == NULL)
+ return -ENOMEM;
+ return 0;
+}
+EXPORT_SYMBOL(tty_port_alloc_xmit_buf);
+
+void tty_port_free_xmit_buf(struct tty_port *port)
+{
+ mutex_lock(&port->mutex);
+ if (port->xmit_buf != NULL) {
+ free_page((unsigned long)port->xmit_buf);
+ port->xmit_buf = NULL;
+ }
+ mutex_unlock(&port->mutex);
+}
+EXPORT_SYMBOL(tty_port_free_xmit_buf);
+
+
Add a new line discipline for "pulse per second" devices connected to
a serial port.
Signed-off-by: Rodolfo Giometti <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
include/linux/tty.h | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7271c62..e3612c3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -23,7 +23,7 @@
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS 18
+#define NR_LDISCS 19
/* line disciplines */
#define N_TTY 0
@@ -45,6 +45,7 @@
#define N_HCI 15 /* Bluetooth HCI UART */
#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */
#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
+#define N_PPS 18 /* Pulse per Second */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
Introduce a kref to the tty structure and use it to protect the tty->signal
tty references. For now we don't introduce it for anything else.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 54 ++++++++++++++++++++++++++++++++++++++++++++-----
include/linux/tty.h | 18 ++++++++++++++++
kernel/fork.c | 5 ++++-
kernel/sys.c | 4 +---
4 files changed, 71 insertions(+), 10 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 7323168..310e070 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -559,6 +559,7 @@ static void do_tty_hangup(struct work_struct *work)
struct tty_ldisc *ld;
int closecount = 0, n;
unsigned long flags;
+ int refs = 0;
if (!tty)
return;
@@ -625,8 +626,12 @@ static void do_tty_hangup(struct work_struct *work)
if (tty->session) {
do_each_pid_task(tty->session, PIDTYPE_SID, p) {
spin_lock_irq(&p->sighand->siglock);
- if (p->signal->tty == tty)
+ if (p->signal->tty == tty) {
p->signal->tty = NULL;
+ /* We defer the dereferences outside fo
+ the tasklist lock */
+ refs++;
+ }
if (!p->signal->leader) {
spin_unlock_irq(&p->sighand->siglock);
continue;
@@ -652,6 +657,10 @@ static void do_tty_hangup(struct work_struct *work)
tty->ctrl_status = 0;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ /* Account for the p->signal references we killed */
+ while (refs--)
+ tty_kref_put(tty);
+
/*
* If one of the devices matches a console pointer, we
* cannot just call hangup() because that will cause
@@ -1424,6 +1433,7 @@ release_mem_out:
/**
* release_one_tty - release tty structure memory
+ * @kref: kref of tty we are obliterating
*
* Releases memory associated with a tty structure, and clears out the
* driver table slots. This function is called when a device is no longer
@@ -1433,17 +1443,19 @@ release_mem_out:
* tty_mutex - sometimes only
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
- * FIXME: should we require tty_mutex is held here ??
*/
-static void release_one_tty(struct tty_struct *tty, int idx)
+static void release_one_tty(struct kref *kref)
{
+ struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
struct ktermios *tp;
+ int idx = tty->index;
if (!devpts)
tty->driver->ttys[idx] = NULL;
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* FIXME: Locking on ->termios array */
tp = tty->termios;
if (!devpts)
tty->driver->termios[idx] = NULL;
@@ -1457,6 +1469,7 @@ static void release_one_tty(struct tty_struct *tty, int idx)
tty->magic = 0;
+ /* FIXME: locking on tty->driver->refcount */
tty->driver->refcount--;
file_list_lock();
@@ -1467,6 +1480,21 @@ static void release_one_tty(struct tty_struct *tty, int idx)
}
/**
+ * tty_kref_put - release a tty kref
+ * @tty: tty device
+ *
+ * Release a reference to a tty device and if need be let the kref
+ * layer destruct the object for us
+ */
+
+void tty_kref_put(struct tty_struct *tty)
+{
+ if (tty)
+ kref_put(&tty->kref, release_one_tty);
+}
+EXPORT_SYMBOL(tty_kref_put);
+
+/**
* release_tty - release tty structure memory
*
* Release both @tty and a possible linked partner (think pty pair),
@@ -1477,14 +1505,20 @@ static void release_one_tty(struct tty_struct *tty, int idx)
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
* FIXME: should we require tty_mutex is held here ??
+ *
+ * FIXME: We want to defer the module put of the driver to the
+ * destructor.
*/
static void release_tty(struct tty_struct *tty, int idx)
{
struct tty_driver *driver = tty->driver;
+ /* This should always be true but check for the moment */
+ WARN_ON(tty->index != idx);
+
if (tty->link)
- release_one_tty(tty->link, idx);
- release_one_tty(tty, idx);
+ tty_kref_put(tty->link);
+ tty_kref_put(tty);
module_put(driver->owner);
}
@@ -2798,6 +2832,7 @@ EXPORT_SYMBOL(do_SAK);
static void initialize_tty_struct(struct tty_struct *tty)
{
memset(tty, 0, sizeof(struct tty_struct));
+ kref_init(&tty->kref);
tty->magic = TTY_MAGIC;
tty_ldisc_init(tty);
tty->session = NULL;
@@ -3053,9 +3088,12 @@ EXPORT_SYMBOL(tty_devnum);
void proc_clear_tty(struct task_struct *p)
{
+ struct tty_struct *tty;
spin_lock_irq(&p->sighand->siglock);
+ tty = p->signal->tty;
p->signal->tty = NULL;
spin_unlock_irq(&p->sighand->siglock);
+ tty_kref_put(tty);
}
/* Called under the sighand lock */
@@ -3071,9 +3109,13 @@ static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
tty->pgrp = get_pid(task_pgrp(tsk));
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
tty->session = get_pid(task_session(tsk));
+ if (tsk->signal->tty) {
+ printk(KERN_DEBUG "tty not NULL!!\n");
+ tty_kref_put(tsk->signal->tty);
+ }
}
put_pid(tsk->signal->tty_old_pgrp);
- tsk->signal->tty = tty;
+ tsk->signal->tty = tty_kref_get(tty);
tsk->signal->tty_old_pgrp = NULL;
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e3612c3..b6e6c26 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -209,6 +209,7 @@ struct tty_operations;
struct tty_struct {
int magic;
+ struct kref kref;
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
@@ -311,6 +312,23 @@ extern int kmsg_redirect;
extern void console_init(void);
extern int vcs_init(void);
+/**
+ * tty_kref_get - get a tty reference
+ * @tty: tty device
+ *
+ * Return a new reference to a tty object. The caller must hold
+ * sufficient locks/counts to ensure that their existing reference cannot
+ * go away
+ */
+
+extern inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
+{
+ if (tty)
+ kref_get(&tty->kref);
+ return tty;
+}
+extern void tty_kref_put(struct tty_struct *tty);
+
extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
const char *routine);
extern char *tty_name(struct tty_struct *tty, char *buf);
diff --git a/kernel/fork.c b/kernel/fork.c
index 7ce2ebe..30de644 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -802,6 +802,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
sig->leader = 0; /* session leadership doesn't inherit */
sig->tty_old_pgrp = NULL;
+ sig->tty = NULL;
sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
sig->gtime = cputime_zero;
@@ -838,6 +839,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
void __cleanup_signal(struct signal_struct *sig)
{
exit_thread_group_keys(sig);
+ tty_kref_put(sig->tty);
kmem_cache_free(signal_cachep, sig);
}
@@ -1227,7 +1229,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
p->nsproxy->pid_ns->child_reaper = p;
p->signal->leader_pid = pid;
- p->signal->tty = current->signal->tty;
+ tty_kref_put(p->signal->tty);
+ p->signal->tty = tty_kref_get(current->signal->tty);
set_task_pgrp(p, task_pgrp_nr(current));
set_task_session(p, task_session_nr(current));
attach_pid(p, PIDTYPE_PGID, task_pgrp(current));
diff --git a/kernel/sys.c b/kernel/sys.c
index 038a7bc..234d945 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1060,9 +1060,7 @@ asmlinkage long sys_setsid(void)
group_leader->signal->leader = 1;
__set_special_pids(sid);
- spin_lock(&group_leader->sighand->siglock);
- group_leader->signal->tty = NULL;
- spin_unlock(&group_leader->sighand->siglock);
+ proc_clear_tty(group_leader);
err = session;
out:
The tty layer keeps driver module counts that are used so the driver knows
when it can be unloaded. For obvious reasons we want to tie that to the
refcounting properly.
At this point the driver side itself isn't refcounted nicely but we can do
that later and kref the drivers.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 17 +++++++++++------
1 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 310e070..fa162c9 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1293,6 +1293,12 @@ static int init_dev(struct tty_driver *driver, int idx,
o_tty = alloc_tty_struct();
if (!o_tty)
goto free_mem_out;
+ if (!try_module_get(driver->other->owner)) {
+ /* This cannot in fact currently happen */
+ free_tty_struct(o_tty);
+ o_tty = NULL;
+ goto free_mem_out;
+ }
initialize_tty_struct(o_tty);
o_tty->driver = driver->other;
o_tty->ops = driver->ops;
@@ -1411,8 +1417,10 @@ end_init:
/* Release locally allocated memory ... nothing placed in slots */
free_mem_out:
kfree(o_tp);
- if (o_tty)
+ if (o_tty) {
+ module_put(o_tty->driver->owner);
free_tty_struct(o_tty);
+ }
kfree(ltp);
kfree(tp);
free_tty_struct(tty);
@@ -1447,6 +1455,7 @@ release_mem_out:
static void release_one_tty(struct kref *kref)
{
struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+ struct tty_driver *driver = tty->driver;
int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
struct ktermios *tp;
int idx = tty->index;
@@ -1471,6 +1480,7 @@ static void release_one_tty(struct kref *kref)
tty->magic = 0;
/* FIXME: locking on tty->driver->refcount */
tty->driver->refcount--;
+ module_put(driver->owner);
file_list_lock();
list_del_init(&tty->tty_files);
@@ -1506,20 +1516,15 @@ EXPORT_SYMBOL(tty_kref_put);
* of ttys that the driver keeps.
* FIXME: should we require tty_mutex is held here ??
*
- * FIXME: We want to defer the module put of the driver to the
- * destructor.
*/
static void release_tty(struct tty_struct *tty, int idx)
{
- struct tty_driver *driver = tty->driver;
-
/* This should always be true but check for the moment */
WARN_ON(tty->index != idx);
if (tty->link)
tty_kref_put(tty->link);
tty_kref_put(tty);
- module_put(driver->owner);
}
/*
From: Jiri Slaby <[email protected]>
readl/writel are not expected to accept iomap return value. Replace
bogus mapping by standard ioremap.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/cyclades.c | 21 ++++++++++++---------
1 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index fe6d774..5e5b1dc 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -4993,12 +4993,14 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
card_name = "Cyclom-Y";
- addr0 = pci_iomap(pdev, 0, CyPCI_Yctl);
+ addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
+ CyPCI_Yctl);
if (addr0 == NULL) {
dev_err(&pdev->dev, "can't remap ctl region\n");
goto err_reg;
}
- addr2 = pci_iomap(pdev, 2, CyPCI_Ywin);
+ addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
+ CyPCI_Ywin);
if (addr2 == NULL) {
dev_err(&pdev->dev, "can't remap base region\n");
goto err_unmap;
@@ -5013,7 +5015,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
} else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
struct RUNTIME_9060 __iomem *ctl_addr;
- ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl);
+ ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
+ CyPCI_Zctl);
if (addr0 == NULL) {
dev_err(&pdev->dev, "can't remap ctl region\n");
goto err_reg;
@@ -5026,8 +5029,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
mailbox = (u32)readl(&ctl_addr->mail_box_0);
- addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ?
- CyPCI_Ze_win : CyPCI_Zwin);
+ addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
+ mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
if (addr2 == NULL) {
dev_err(&pdev->dev, "can't remap base region\n");
goto err_unmap;
@@ -5159,9 +5162,9 @@ err_null:
cy_card[card_no].base_addr = NULL;
free_irq(irq, &cy_card[card_no]);
err_unmap:
- pci_iounmap(pdev, addr0);
+ iounmap(addr0);
if (addr2)
- pci_iounmap(pdev, addr2);
+ iounmap(addr2);
err_reg:
pci_release_regions(pdev);
err_dis:
@@ -5186,9 +5189,9 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev)
cy_writew(cinfo->ctl_addr + 0x68,
readw(cinfo->ctl_addr + 0x68) & ~0x0900);
- pci_iounmap(pdev, cinfo->base_addr);
+ iounmap(cinfo->base_addr);
if (cinfo->ctl_addr)
- pci_iounmap(pdev, cinfo->ctl_addr);
+ iounmap(cinfo->ctl_addr);
if (cinfo->irq
#ifndef CONFIG_CYZ_INTR
&& !IS_CYC_Z(*cinfo)
From: Jiri Slaby <[email protected]>
board->base is increased for CF cards after mapping. Use board->base2
for unmapping the region, since it holds the original/correct address.
Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/sx.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index c385206..5b8d7a1 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2504,7 +2504,7 @@ static void __devexit sx_remove_card(struct sx_board *board,
del_timer(&board->timer);
if (pdev) {
#ifdef CONFIG_PCI
- pci_iounmap(pdev, board->base);
+ pci_iounmap(pdev, board->base2);
pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2);
#endif
} else {
@@ -2703,7 +2703,7 @@ static int __devinit sx_pci_probe(struct pci_dev *pdev,
return 0;
err_unmap:
- pci_iounmap(pdev, board->base);
+ pci_iounmap(pdev, board->base2);
err_reg:
pci_release_region(pdev, reg);
err_flag:
From: \\\"Will Newton\\\" <[email protected]>
Remove some inlines from various functions that are called once, are too
big to inline, or are called only from slow path code. This saves around
300 bytes of code for me.
Signed-off-by: Will Newton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/8250.c | 9 ++++-----
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9f5e60d..e898edf 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -540,7 +540,7 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
/*
* FIFO support.
*/
-static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+static void serial8250_clear_fifos(struct uart_8250_port *p)
{
if (p->capabilities & UART_CAP_FIFO) {
serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
@@ -555,7 +555,7 @@ static inline void serial8250_clear_fifos(struct uart_8250_port *p)
* capability" bit enabled. Note that on XR16C850s, we need to
* reset LCR to write to IER.
*/
-static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
{
if (p->capabilities & UART_CAP_SLEEP) {
if (p->capabilities & UART_CAP_EFR) {
@@ -1428,8 +1428,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
/*
* This handles the interrupt from one port.
*/
-static inline void
-serial8250_handle_port(struct uart_8250_port *up)
+static void serial8250_handle_port(struct uart_8250_port *up)
{
unsigned int status;
unsigned long flags;
@@ -1764,7 +1763,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state)
/*
* Wait for transmitter & holding register to empty
*/
-static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
{
unsigned int status, tmout = 10000;
This came in via another tree and unfortunately is rather broken on
the tty side. Comment the apparent locking problems for someone who knows
the driver to look at.
Fix the termios and other ioctl handling. The driver was calling the wrong
methods for what it wanted to do but the right ones existed so its a simple
fix up.
---
drivers/char/pcmcia/ipwireless/tty.c | 19 ++++++++++---------
1 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 3a23e76..569f2f7 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -276,6 +276,7 @@ static int ipw_write_room(struct tty_struct *linux_tty)
struct ipw_tty *tty = linux_tty->driver_data;
int room;
+ /* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
@@ -397,6 +398,7 @@ static int set_control_lines(struct ipw_tty *tty, unsigned int set,
static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
{
struct ipw_tty *tty = linux_tty->driver_data;
+ /* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
@@ -412,6 +414,7 @@ ipw_tiocmset(struct tty_struct *linux_tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct ipw_tty *tty = linux_tty->driver_data;
+ /* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
@@ -433,6 +436,8 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
if (!tty->open_count)
return -EINVAL;
+ /* FIXME: Exactly how is the tty object locked here .. */
+
switch (cmd) {
case TIOCGSERIAL:
return ipwireless_get_serial_info(tty, (void __user *) arg);
@@ -467,13 +472,6 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
}
return 0;
- case TCGETS:
- case TCGETA:
- return n_tty_ioctl(linux_tty, file, cmd, arg);
-
- case TCFLSH:
- return n_tty_ioctl(linux_tty, file, cmd, arg);
-
case FIONREAD:
{
int val = 0;
@@ -482,10 +480,11 @@ static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
return -EFAULT;
}
return 0;
+ case TCFLSH:
+ return tty_perform_flush(linux_tty, arg);
}
}
-
- return -ENOIOCTLCMD;
+ return tty_mode_ioctl(linux_tty, file, cmd , arg);
}
static int add_tty(dev_node_t *nodesp, int j,
@@ -588,6 +587,8 @@ void ipwireless_tty_free(struct ipw_tty *tty)
tty_hangup(ttyj->linux_tty);
/* Wait till the tty_hangup has completed */
flush_scheduled_work();
+ /* FIXME: Exactly how is the tty object locked here
+ against a parallel ioctl etc */
mutex_lock(&ttyj->ipw_tty_mutex);
}
while (ttyj->open_count)
JP Tosoni observed:
"About a RS485 ioctl: could you consider the attached files which are
already in the Linux kernel (in include/asm-cris). They define a
TIOCSERSETRS485 (ioctl.h), and the data structure (rs485.h)
with allows to specify timings. Sounds just like what we want ?"
and he's right: sort of. Rework the structure to use flag bits and make the
time delay a fixed sized field so we don't get 32/64bit problems. Add the ioctls
to x86 so that people know what to add to their platform of choice.
Signed-off-by: Alan Cox <[email protected]>
---
include/asm-x86/ioctls.h | 2 ++
include/linux/serial.h | 16 ++++++++++++++++
2 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
index c0c338b..2cd4775 100644
--- a/include/asm-x86/ioctls.h
+++ b/include/asm-x86/ioctls.h
@@ -51,6 +51,8 @@
#define TCSETS2 _IOW('T', 0x2B, struct termios2)
#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485 0x542E
+#define TIOCSRS485 0x542F
#define TIOCGPTN _IOR('T', 0x30, unsigned int)
/* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index deb7143..1ea8d92 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -173,6 +173,22 @@ struct serial_icounter_struct {
int reserved[9];
};
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+ __u32 flags; /* RS485 feature flags */
+#define SER_RS485_ENABLED (1 << 0)
+#define SER_RS485_RTS_ON_SEND (1 << 1)
+#define SER_RS485_RTS_AFTER_SEND (1 << 2)
+ __u32 delay_rts_before_send; /* Milliseconds */
+ __u32 padding[6]; /* Memory is cheap, new structs
+ are a royal PITA .. */
+};
#ifdef __KERNEL__
#include <linux/compiler.h>
We need a way to describe the various additional modes and flow control
features that random weird hardware shows up and software such as wine
wants to emulate as Windows supports them.
TCGETX/TCSETX and the termiox ioctl are a SYS5 extension that we might as
well adopt. This patches adds the structures and the basic ioctl interfaces
when the TCGETX etc defines are added for an architecture. Drivers wishing
to use this stuff need to add new methods.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_ioctl.c | 58 ++++++++++++++++++++++++++++++++++++++++++++
include/asm-x86/ioctls.h | 4 +++
include/linux/termios.h | 15 +++++++++++
include/linux/tty.h | 1 +
include/linux/tty_driver.h | 9 +++++++
5 files changed, 87 insertions(+), 0 deletions(-)
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index bf34e45..93bfa1d 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -579,6 +579,50 @@ static int get_termio(struct tty_struct *tty, struct termio __user *termio)
return 0;
}
+
+#ifdef TCGETX
+
+/**
+ * set_termiox - set termiox fields if possible
+ * @tty: terminal
+ * @arg: termiox structure from user
+ * @opt: option flags for ioctl type
+ *
+ * Implement the device calling points for the SYS5 termiox ioctl
+ * interface in Linux
+ */
+
+static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
+{
+ struct termiox tnew;
+ struct tty_ldisc *ld;
+
+ if (tty->termiox == NULL)
+ return -EINVAL;
+ if (copy_from_user(&tnew, arg, sizeof(struct termiox)))
+ return -EFAULT;
+
+ ld = tty_ldisc_ref(tty);
+ if (ld != NULL) {
+ if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
+ tty_ldisc_deref(ld);
+ }
+ if (opt & TERMIOS_WAIT) {
+ tty_wait_until_sent(tty, 0);
+ if (signal_pending(current))
+ return -EINTR;
+ }
+
+ mutex_lock(&tty->termios_mutex);
+ if (tty->ops->set_termiox)
+ tty->ops->set_termiox(tty, &tnew);
+ mutex_unlock(&tty->termios_mutex);
+ return 0;
+}
+
+#endif
+
static unsigned long inq_canon(struct tty_struct *tty)
{
int nr, head, tail;
@@ -936,6 +980,20 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
return -EFAULT;
return 0;
#endif
+#ifdef TCGETX
+ case TCGETX:
+ if (real_tty->termiox == NULL)
+ return -EINVAL;
+ if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
+ return -EFAULT;
+ return 0;
+ case TCSETX:
+ return set_termiox(real_tty, p, 0);
+ case TCSETXW:
+ return set_termiox(real_tty, p, TERMIOS_WAIT);
+ case TCSETXF:
+ return set_termiox(real_tty, p, TERMIOS_FLUSH);
+#endif
case TIOCGSOFTCAR:
/* FIXME: for correctness we may need to take the termios
lock here - review */
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
index 2cd4775..d2798f9 100644
--- a/include/asm-x86/ioctls.h
+++ b/include/asm-x86/ioctls.h
@@ -56,6 +56,10 @@
#define TIOCGPTN _IOR('T', 0x30, unsigned int)
/* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TCGETX 0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX 0x5433
+#define TCSETXF 0x5434
+#define TCSETXW 0x5435
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
diff --git a/include/linux/termios.h b/include/linux/termios.h
index 4786628..2acd0c1 100644
--- a/include/linux/termios.h
+++ b/include/linux/termios.h
@@ -4,4 +4,19 @@
#include <linux/types.h>
#include <asm/termios.h>
+#define NFF 5
+
+struct termiox
+{
+ __u16 x_hflag;
+ __u16 x_cflag;
+ __u16 x_rflag[NFF];
+ __u16 x_sflag;
+};
+
+#define RTSXOFF 0x0001 /* RTS flow control on input */
+#define CTSXON 0x0002 /* CTS flow control on output */
+#define DTRXOFF 0x0004 /* DTR flow control on input */
+#define DSRXON 0x0008 /* DCD flow control on output */
+
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index b6e6c26..b64d10b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -219,6 +219,7 @@ struct tty_struct {
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
struct ktermios *termios, *termios_locked;
+ struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
struct pid *pgrp; /* Protected by ctrl lock */
struct pid *session;
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 16d2794..ac6e58e 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -180,6 +180,14 @@
* not force errors here if they are not resizable objects (eg a serial
* line). See tty_do_resize() if you need to wrap the standard method
* in your own logic - the usual case.
+ *
+ * void (*set_termiox)(struct tty_struct *tty, struct termiox *new);
+ *
+ * Called when the device receives a termiox based ioctl. Passes down
+ * the requested data from user space. This method will not be invoked
+ * unless the tty also has a valid tty->termiox pointer.
+ *
+ * Optional: Called under the termios lock
*/
#include <linux/fs.h>
@@ -220,6 +228,7 @@ struct tty_operations {
unsigned int set, unsigned int clear);
int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize *ws);
+ int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);
This moves us towards sanity and should mean our termios locking is now
complete and comprehensive.
---
drivers/char/tty_io.c | 2 +-
drivers/char/tty_ioctl.c | 58 ++++++++++++++++++++++++++++++----------------
2 files changed, 39 insertions(+), 21 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index fa162c9..ac53d7f 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2605,7 +2605,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case TIOCSTI:
return tiocsti(tty, p);
case TIOCGWINSZ:
- return tiocgwinsz(tty, p);
+ return tiocgwinsz(real_tty, p);
case TIOCSWINSZ:
return tiocswinsz(tty, real_tty, p);
case TIOCCONS:
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 93bfa1d..3067085 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -893,6 +893,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
{
struct tty_struct *real_tty;
void __user *p = (void __user *)arg;
+ int ret = 0;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
@@ -928,18 +929,24 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
return set_termios(real_tty, p, TERMIOS_OLD);
#ifndef TCGETS2
case TCGETS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
#else
case TCGETS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TCGETS2:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TCSETSF2:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
case TCSETSW2:
@@ -957,36 +964,46 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
return set_termios(real_tty, p, TERMIOS_TERMIO);
#ifndef TCGETS2
case TIOCGLCKTRMIOS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ mutex_lock(&real_tty->termios_mutex);
if (user_termios_to_kernel_termios(real_tty->termios_locked,
(struct termios __user *) arg))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
#else
case TIOCGLCKTRMIOS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
+ ret = -EPERM;
+ mutex_lock(&real_tty->termios_mutex);
if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
(struct termios __user *) arg))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
#endif
#ifdef TCGETX
case TCGETX:
if (real_tty->termiox == NULL)
return -EINVAL;
+ mutex_lock(&real_tty->termios_mutex);
if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TCSETX:
return set_termiox(real_tty, p, 0);
case TCSETXW:
@@ -995,10 +1012,11 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
return set_termiox(real_tty, p, TERMIOS_FLUSH);
#endif
case TIOCGSOFTCAR:
- /* FIXME: for correctness we may need to take the termios
- lock here - review */
- return put_user(C_CLOCAL(real_tty) ? 1 : 0,
+ mutex_lock(&real_tty->termios_mutex);
+ ret = put_user(C_CLOCAL(real_tty) ? 1 : 0,
(int __user *)arg);
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned int __user *) arg))
return -EFAULT;
We now return a kref covered tty reference. That ensures the tty structure
doesn't go away when you have a return from get_current_tty. This is not
enough to protect you from most of the resources being freed behind your
back - yet.
[Updated to include fixes for SELinux problems found by Andrew Morton and
an s390 leak found while debugging the former]
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 10 ++++++----
drivers/s390/char/fs3270.c | 3 ++-
fs/dquot.c | 6 +++---
security/selinux/hooks.c | 3 ++-
4 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 9a76db3..4c0e4ed 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -786,12 +786,12 @@ void disassociate_ctty(int on_exit)
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
- lock_kernel();
mutex_unlock(&tty_mutex);
- /* XXX: here we race, there is nothing protecting tty */
+ lock_kernel();
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
unlock_kernel();
+ tty_kref_put(tty);
} else if (on_exit) {
struct pid *old_pgrp;
spin_lock_irq(¤t->sighand->siglock);
@@ -819,7 +819,6 @@ void disassociate_ctty(int on_exit)
spin_unlock_irq(¤t->sighand->siglock);
mutex_lock(&tty_mutex);
- /* It is possible that do_tty_hangup has free'd this tty */
tty = get_current_tty();
if (tty) {
unsigned long flags;
@@ -829,6 +828,7 @@ void disassociate_ctty(int on_exit)
tty->session = NULL;
tty->pgrp = NULL;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty_kref_put(tty);
} else {
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
@@ -1806,6 +1806,8 @@ retry_open:
index = tty->index;
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
/* noctty = 1; */
+ /* FIXME: Should we take a driver reference ? */
+ tty_kref_put(tty);
goto got_driver;
}
#ifdef CONFIG_VT
@@ -3135,7 +3137,7 @@ struct tty_struct *get_current_tty(void)
{
struct tty_struct *tty;
WARN_ON_ONCE(!mutex_is_locked(&tty_mutex));
- tty = current->signal->tty;
+ tty = tty_kref_get(current->signal->tty);
/*
* session->tty can be changed/cleared from under us, make sure we
* issue the load. The obtained pointer, when not NULL, is valid as
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index d18e6d2..3ef5425 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -430,11 +430,12 @@ fs3270_open(struct inode *inode, struct file *filp)
mutex_lock(&tty_mutex);
tty = get_current_tty();
if (!tty || tty->driver->major != IBM_TTY3270_MAJOR) {
- mutex_unlock(&tty_mutex);
+ tty_kref_put(tty);
rc = -ENODEV;
goto out;
}
minor = tty->index + RAW3270_FIRSTMINOR;
+ tty_kref_put(tty);
mutex_unlock(&tty_mutex);
}
/* Check if some other program is already using fullscreen mode. */
diff --git a/fs/dquot.c b/fs/dquot.c
index 8ec4d6c..7417a6c 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -897,8 +897,9 @@ static void print_warning(struct dquot *dquot, const int warntype)
mutex_lock(&tty_mutex);
tty = get_current_tty();
+ mutex_unlock(&tty_mutex);
if (!tty)
- goto out_lock;
+ return;
tty_write_message(tty, dquot->dq_sb->s_id);
if (warntype == QUOTA_NL_ISOFTWARN || warntype == QUOTA_NL_BSOFTWARN)
tty_write_message(tty, ": warning, ");
@@ -926,8 +927,7 @@ static void print_warning(struct dquot *dquot, const int warntype)
break;
}
tty_write_message(tty, msg);
-out_lock:
- mutex_unlock(&tty_mutex);
+ tty_kref_put(tty);
}
#endif
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 03fc6a8..c856db8 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2122,6 +2122,7 @@ static inline void flush_unauthorized_files(struct files_struct *files)
mutex_lock(&tty_mutex);
tty = get_current_tty();
+ mutex_unlock(&tty_mutex);
if (tty) {
file_list_lock();
file = list_entry(tty->tty_files.next, typeof(*file), f_u.fu_list);
@@ -2138,8 +2139,8 @@ static inline void flush_unauthorized_files(struct files_struct *files)
}
}
file_list_unlock();
+ tty_kref_put(tty);
}
- mutex_unlock(&tty_mutex);
/* Reset controlling tty. */
if (drop_tty)
no_tty();
This is pure tty code so put it in the tty layer where it can be with the
locking relevant material it uses
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 25 +++++++++++++++++++++++++
kernel/printk.c | 16 ----------------
2 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 4c0e4ed..913b502 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1081,6 +1081,31 @@ out:
return ret;
}
+/**
+ * tty_write_message - write a message to a certain tty, not just the console.
+ * @tty: the destination tty_struct
+ * @msg: the message to write
+ *
+ * This is used for messages that need to be redirected to a specific tty.
+ * We don't put it into the syslog queue right now maybe in the future if
+ * really needed.
+ *
+ * We must still hold the BKL and test the CLOSING flag for the moment.
+ */
+
+void tty_write_message(struct tty_struct *tty, char *msg)
+{
+ lock_kernel();
+ if (tty) {
+ mutex_lock(&tty->atomic_write_lock);
+ if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags))
+ tty->ops->write(tty, msg, strlen(msg));
+ tty_write_unlock(tty);
+ }
+ unlock_kernel();
+ return;
+}
+
/**
* tty_write - write method for tty device file
diff --git a/kernel/printk.c b/kernel/printk.c
index b51b156..a430fd0 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1291,22 +1291,6 @@ static int __init disable_boot_consoles(void)
}
late_initcall(disable_boot_consoles);
-/**
- * tty_write_message - write a message to a certain tty, not just the console.
- * @tty: the destination tty_struct
- * @msg: the message to write
- *
- * This is used for messages that need to be redirected to a specific tty.
- * We don't put it into the syslog queue right now maybe in the future if
- * really needed.
- */
-void tty_write_message(struct tty_struct *tty, char *msg)
-{
- if (tty && tty->ops->write)
- tty->ops->write(tty, msg, strlen(msg));
- return;
-}
-
#if defined CONFIG_PRINTK
/*
We always use the real tty one for stuff so the pty one should not be
compared. As we propogate window changes to both it doesn't currently
matter but will when we tidy up the pty termios logic a bit more
---
drivers/char/tty_io.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index ac53d7f..9a76db3 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2133,7 +2133,7 @@ int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
/* For a PTY we need to lock the tty side */
mutex_lock(&real_tty->termios_mutex);
- if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
+ if (!memcmp(ws, &real_tty->winsize, sizeof(*ws)))
goto done;
/* Get the PID values and reference them so we can
avoid holding the tty ctrl lock while sending signals */
Use kref in the USB serial drivers so that we don't free tty structures
from under the URB receive handlers as has historically been the case if
you were unlucky. This also gives us a framework for general tty drivers to
use tty_port objects and refcount.
Contains two err->dev_err changes merged together to fix clashes in the
-next tree.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_port.c | 41 ++++++++++++++++++
drivers/usb/serial/aircable.c | 15 ++++--
drivers/usb/serial/belkin_sa.c | 3 +
drivers/usb/serial/console.c | 8 ++-
drivers/usb/serial/cyberjack.c | 3 +
drivers/usb/serial/cypress_m8.c | 5 +-
drivers/usb/serial/digi_acceleport.c | 19 ++++++--
drivers/usb/serial/empeg.c | 8 ++-
drivers/usb/serial/ftdi_sio.c | 19 +++++---
drivers/usb/serial/garmin_gps.c | 3 +
drivers/usb/serial/generic.c | 3 +
drivers/usb/serial/io_edgeport.c | 43 ++++++++++++------
drivers/usb/serial/io_ti.c | 26 ++++++++---
drivers/usb/serial/ipaq.c | 3 +
drivers/usb/serial/ipw.c | 3 +
drivers/usb/serial/ir-usb.c | 3 +
drivers/usb/serial/iuu_phoenix.c | 3 +
drivers/usb/serial/keyspan.c | 77 +++++++++++++++++----------------
drivers/usb/serial/keyspan_pda.c | 16 ++++---
drivers/usb/serial/kl5kusb105.c | 3 +
drivers/usb/serial/kobil_sct.c | 3 +
drivers/usb/serial/mct_u232.c | 6 ++-
drivers/usb/serial/mos7720.c | 36 ++-------------
drivers/usb/serial/mos7840.c | 7 ++-
drivers/usb/serial/navman.c | 3 +
drivers/usb/serial/omninet.c | 10 +++-
drivers/usb/serial/option.c | 18 +++++---
drivers/usb/serial/oti6858.c | 3 +
drivers/usb/serial/pl2303.c | 4 +-
drivers/usb/serial/safe_serial.c | 11 +++--
drivers/usb/serial/sierra.c | 16 ++++---
drivers/usb/serial/spcp8x5.c | 3 +
drivers/usb/serial/ti_usb_3410_5052.c | 44 ++++++++++---------
drivers/usb/serial/usb-serial.c | 24 ++++++----
drivers/usb/serial/visor.c | 18 +++++---
drivers/usb/serial/whiteheat.c | 8 ++-
include/linux/tty.h | 3 +
37 files changed, 313 insertions(+), 208 deletions(-)
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 6fadb19..553b0e9 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -23,6 +23,7 @@ void tty_port_init(struct tty_port *port)
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
mutex_init(&port->mutex);
+ spin_lock_init(&port->lock);
port->close_delay = (50 * HZ) / 100;
port->closing_wait = (3000 * HZ) / 100;
}
@@ -53,3 +54,43 @@ void tty_port_free_xmit_buf(struct tty_port *port)
EXPORT_SYMBOL(tty_port_free_xmit_buf);
+/**
+ * tty_port_tty_get - get a tty reference
+ * @port: tty port
+ *
+ * Return a refcount protected tty instance or NULL if the port is not
+ * associated with a tty (eg due to close or hangup)
+ */
+
+struct tty_struct *tty_port_tty_get(struct tty_port *port)
+{
+ unsigned long flags;
+ struct tty_struct *tty;
+
+ spin_lock_irqsave(&port->lock, flags);
+ tty = tty_kref_get(port->tty);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return tty;
+}
+EXPORT_SYMBOL(tty_port_tty_get);
+
+/**
+ * tty_port_tty_set - set the tty of a port
+ * @port: tty port
+ * @tty: the tty
+ *
+ * Associate the port and tty pair. Manages any internal refcounts.
+ * Pass NULL to deassociate a port
+ */
+
+void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (port->tty)
+ tty_kref_put(port->tty);
+ port->tty = tty;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+EXPORT_SYMBOL(tty_port_tty_set);
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 79ea98c..99fb7dc 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,7 +272,7 @@ static void aircable_read(struct work_struct *work)
* 64 bytes, to ensure I do not get throttled.
* Ask USB mailing list for better aproach.
*/
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
schedule_work(&priv->rx_work);
@@ -283,12 +283,13 @@ static void aircable_read(struct work_struct *work)
count = min(64, serial_buf_data_avail(priv->rx_buf));
if (count <= 0)
- return; /* We have finished sending everything. */
+ goto out; /* We have finished sending everything. */
tty_prepare_flip_string(tty, &data, count);
if (!data) {
- err("%s- kzalloc(%d) failed.", __func__, count);
- return;
+ dev_err(&port->dev, "%s- kzalloc(%d) failed.",
+ __func__, count);
+ goto out;
}
serial_buf_get(priv->rx_buf, data, count);
@@ -297,7 +298,8 @@ static void aircable_read(struct work_struct *work)
if (serial_buf_data_avail(priv->rx_buf))
schedule_work(&priv->rx_work);
-
+out:
+ tty_kref_put(tty);
return;
}
/* End of private methods */
@@ -495,7 +497,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
if (urb->actual_length <= 2) {
/* This is an incomplete package */
@@ -527,6 +529,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
}
aircable_read(&priv->rx_work);
}
+ tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2ebe06c..1913bc7 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -322,7 +322,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
* to look in to this before committing any code.
*/
if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
/* Overrun Error */
if (priv->last_lsr & BELKIN_SA_LSR_OE) {
}
@@ -335,6 +335,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
/* Break Indicator */
if (priv->last_lsr & BELKIN_SA_LSR_BI) {
}
+ tty_kref_put(tty);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index e980766..5b20de1 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -117,7 +117,7 @@ static int usb_console_setup(struct console *co, char *options)
}
port = serial->port[0];
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
info->port = port;
@@ -143,7 +143,7 @@ static int usb_console_setup(struct console *co, char *options)
}
memset(&dummy, 0, sizeof(struct ktermios));
tty->termios = termios;
- port->port.tty = tty;
+ tty_port_tty_set(&port->port, tty);
}
/* only call the device specific open if this
@@ -163,7 +163,7 @@ static int usb_console_setup(struct console *co, char *options)
tty_termios_encode_baud_rate(termios, baud, baud);
serial->type->set_termios(tty, port, &dummy);
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
kfree(termios);
kfree(tty);
}
@@ -176,7 +176,7 @@ out:
return retval;
free_termios:
kfree(termios);
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
free_tty:
kfree(tty);
reset_open_count:
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b4d7235..94ef36c 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -384,7 +384,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
return;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - ignoring since device not open\n", __func__);
return;
@@ -394,6 +394,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
spin_lock(&priv->lock);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 22837a3..f3514a9 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1286,7 +1286,7 @@ static void cypress_read_int_callback(struct urb *urb)
}
spin_unlock_irqrestore(&priv->lock, flags);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
@@ -1362,7 +1362,7 @@ static void cypress_read_int_callback(struct urb *urb)
data[i]);
tty_insert_flip_char(tty, data[i], tty_flag);
}
- tty_flip_buffer_push(port->port.tty);
+ tty_flip_buffer_push(tty);
}
spin_lock_irqsave(&priv->lock, flags);
@@ -1371,6 +1371,7 @@ static void cypress_read_int_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
continue_read:
+ tty_kref_put(tty);
/* Continue trying to always read... unless the port has closed. */
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 240aad1..5756ac6 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -604,7 +604,9 @@ static void digi_wakeup_write_lock(struct work_struct *work)
static void digi_wakeup_write(struct usb_serial_port *port)
{
- tty_wakeup(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
@@ -1668,7 +1670,7 @@ static int digi_read_inb_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty;
struct digi_port *priv = usb_get_serial_port_data(port);
int opcode = ((unsigned char *)urb->transfer_buffer)[0];
int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1692,6 +1694,7 @@ static int digi_read_inb_callback(struct urb *urb)
return -1;
}
+ tty = tty_port_tty_get(&port->port);
spin_lock(&priv->dp_port_lock);
/* check for throttle; if set, do not resubmit read urb */
@@ -1735,6 +1738,7 @@ static int digi_read_inb_callback(struct urb *urb)
}
}
spin_unlock(&priv->dp_port_lock);
+ tty_kref_put(tty);
if (opcode == DIGI_CMD_RECEIVE_DISABLE)
dbg("%s: got RECEIVE_DISABLE", __func__);
@@ -1760,6 +1764,7 @@ static int digi_read_oob_callback(struct urb *urb)
struct usb_serial_port *port = urb->context;
struct usb_serial *serial = port->serial;
+ struct tty_struct *tty;
struct digi_port *priv = usb_get_serial_port_data(port);
int opcode, line, status, val;
int i;
@@ -1787,10 +1792,11 @@ static int digi_read_oob_callback(struct urb *urb)
if (priv == NULL)
return -1;
+ tty = tty_port_tty_get(&port->port);
rts = 0;
if (port->port.count)
- rts = port->port.tty->termios->c_cflag & CRTSCTS;
-
+ rts = tty->termios->c_cflag & CRTSCTS;
+
if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
@@ -1798,14 +1804,14 @@ static int digi_read_oob_callback(struct urb *urb)
priv->dp_modem_signals |= TIOCM_CTS;
/* port must be open to use tty struct */
if (rts) {
- port->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
digi_wakeup_write(port);
}
} else {
priv->dp_modem_signals &= ~TIOCM_CTS;
/* port must be open to use tty struct */
if (rts)
- port->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
}
if (val & DIGI_READ_INPUT_SIGNALS_DSR)
priv->dp_modem_signals |= TIOCM_DSR;
@@ -1830,6 +1836,7 @@ static int digi_read_oob_callback(struct urb *urb)
} else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
wake_up_interruptible(&priv->dp_flush_wait);
}
+ tty_kref_put(tty);
}
return 0;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index a6ab5b5..1072e84 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -33,9 +33,8 @@
* Moved MOD_DEC_USE_COUNT to end of empeg_close().
*
* (12/03/2000) gb
- * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to
- * empeg_open(). This notifies the tty driver that the termios have
- * changed.
+ * Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
+ * This notifies the tty driver that the termios have changed.
*
* (11/13/2000) gb
* Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
@@ -354,7 +353,7 @@ static void empeg_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
@@ -362,6 +361,7 @@ static void empeg_read_bulk_callback(struct urb *urb)
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc93b5..70a3719 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1808,7 +1808,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
if (port->port.count <= 0)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
@@ -1817,7 +1817,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
- return;
+ goto out;
}
if (urb != port->read_urb)
@@ -1827,7 +1827,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
/* This will happen at close every time so it is a dbg not an
err */
dbg("(this is ok on close) nonzero read bulk status received: %d", status);
- return;
+ goto out;
}
/* count data bytes, but not status bytes */
@@ -1838,7 +1838,8 @@ static void ftdi_read_bulk_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->rx_lock, flags);
ftdi_process_read(&priv->rx_work.work);
-
+out:
+ tty_kref_put(tty);
} /* ftdi_read_bulk_callback */
@@ -1863,7 +1864,7 @@ static void ftdi_process_read(struct work_struct *work)
if (port->port.count <= 0)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
@@ -1872,13 +1873,13 @@ static void ftdi_process_read(struct work_struct *work)
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
- return;
+ goto out;
}
urb = port->read_urb;
if (!urb) {
dbg("%s - bad read_urb pointer - exiting", __func__);
- return;
+ goto out;
}
data = urb->transfer_buffer;
@@ -2020,7 +2021,7 @@ static void ftdi_process_read(struct work_struct *work)
schedule_delayed_work(&priv->rx_work, 1);
else
dbg("%s - port is closed", __func__);
- return;
+ goto out;
}
/* urb is completely processed */
@@ -2041,6 +2042,8 @@ static void ftdi_process_read(struct work_struct *work)
err("%s - failed resubmitting read urb, error %d",
__func__, result);
}
+out:
+ tty_kref_put(tty);
} /* ftdi_process_read */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index d953820..2ad0569 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -276,7 +276,7 @@ static inline int isAbortTrfCmnd(const unsigned char *buf)
static void send_to_tty(struct usb_serial_port *port,
char *data, unsigned int actual_length)
{
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
if (tty && actual_length) {
@@ -287,6 +287,7 @@ static void send_to_tty(struct usb_serial_port *port,
tty_insert_flip_string(tty, data, actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index fe84c88..814909f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -330,7 +330,7 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
{
struct urb *urb = port->read_urb;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
int room;
/* Push data to tty */
@@ -341,6 +341,7 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
tty_flip_buffer_push(tty);
}
}
+ tty_kref_put(tty);
resubmit_read_urb(port, GFP_ATOMIC);
}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bfa508d..611f97f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -600,6 +600,7 @@ static void edge_interrupt_callback(struct urb *urb)
struct edgeport_serial *edge_serial = urb->context;
struct edgeport_port *edge_port;
struct usb_serial_port *port;
+ struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int length = urb->actual_length;
int bytes_avail;
@@ -675,9 +676,12 @@ static void edge_interrupt_callback(struct urb *urb)
/* tell the tty driver that something
has changed */
- if (edge_port->port->port.tty)
- tty_wakeup(edge_port->port->port.tty);
-
+ tty = tty_port_tty_get(
+ &edge_port->port->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
/* Since we have more credit, check
if more data can be sent */
send_more_port_data(edge_serial,
@@ -778,13 +782,14 @@ static void edge_bulk_out_data_callback(struct urb *urb)
__func__, status);
}
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
if (tty && edge_port->open) {
/* let the tty driver wakeup if it has a special
write_wakeup function */
tty_wakeup(tty);
}
+ tty_kref_put(tty);
/* Release the Write URB */
edge_port->write_in_progress = false;
@@ -826,11 +831,12 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
}
/* Get pointer to tty */
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
/* tell the tty driver that something has changed */
if (tty && edge_port->open)
tty_wakeup(tty);
+ tty_kref_put(tty);
/* we have completed the command */
edge_port->commandPending = false;
@@ -1932,11 +1938,13 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port->open) {
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(
+ &edge_port->port->port);
if (tty) {
dbg("%s - Sending %d bytes to TTY for port %d",
__func__, rxLen, edge_serial->rxPort);
edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
+ tty_kref_put(tty);
}
edge_port->icount.rx += rxLen;
}
@@ -1971,6 +1979,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
{
struct usb_serial_port *port;
struct edgeport_port *edge_port;
+ struct tty_struct *tty;
__u8 code = edge_serial->rxStatusCode;
/* switch the port pointer to the one being currently talked about */
@@ -2020,10 +2029,12 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
/* send the current line settings to the port so we are
in sync with any further termios calls */
- /* FIXME: locking on tty */
- if (edge_port->port->port.tty)
- change_port_settings(edge_port->port->port.tty,
- edge_port, edge_port->port->port.tty->termios);
+ tty = tty_port_tty_get(&edge_port->port->port);
+ if (tty) {
+ change_port_settings(tty,
+ edge_port, tty->termios);
+ tty_kref_put(tty);
+ }
/* we have completed the open */
edge_port->openPending = false;
@@ -2163,10 +2174,14 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
}
/* Place LSR data byte into Rx buffer */
- if (lsrData && edge_port->port->port.tty)
- edge_tty_recv(&edge_port->port->dev,
- edge_port->port->port.tty, &data, 1);
-
+ if (lsrData) {
+ struct tty_struct *tty =
+ tty_port_tty_get(&edge_port->port->port);
+ if (tty) {
+ edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+ tty_kref_put(tty);
+ }
+ }
/* update input line counters */
icount = &edge_port->icount;
if (newLsr & LSR_BREAK)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index cb4c543..541dd8e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -572,7 +572,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
int flush)
{
int baud_rate;
- struct tty_struct *tty = port->port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port->port);
wait_queue_t wait;
unsigned long flags;
@@ -599,6 +599,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
if (flush)
edge_buf_clear(port->ep_out_buf);
spin_unlock_irqrestore(&port->ep_lock, flags);
+ tty_kref_put(tty);
/* wait for data to drain from the device */
timeout += jiffies;
@@ -1554,7 +1555,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
/* Save the new modem status */
edge_port->shadow_msr = msr & 0xf0;
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
/* handle CTS flow control */
if (tty && C_CRTSCTS(tty)) {
if (msr & EDGEPORT_MSR_CTS) {
@@ -1564,6 +1565,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
tty->hw_stopped = 1;
}
}
+ tty_kref_put(tty);
return;
}
@@ -1574,6 +1576,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
struct async_icount *icount;
__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
LSR_FRM_ERR | LSR_BREAK));
+ struct tty_struct *tty;
dbg("%s - %02x", __func__, new_lsr);
@@ -1587,8 +1590,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
/* Place LSR data byte into Rx buffer */
- if (lsr_data && edge_port->port->port.tty)
- edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+ if (lsr_data) {
+ tty = tty_port_tty_get(&edge_port->port->port);
+ if (tty) {
+ edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+ tty_kref_put(tty);
+ }
+ }
/* update input line counters */
icount = &edge_port->icount;
@@ -1749,7 +1757,7 @@ static void edge_bulk_in_callback(struct urb *urb)
++data;
}
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
if (tty && urb->actual_length) {
usb_serial_debug_data(debug, &edge_port->port->dev,
__func__, urb->actual_length, data);
@@ -1761,6 +1769,7 @@ static void edge_bulk_in_callback(struct urb *urb)
urb->actual_length);
edge_port->icount.rx += urb->actual_length;
}
+ tty_kref_put(tty);
exit:
/* continue read unless stopped */
@@ -1796,6 +1805,7 @@ static void edge_bulk_out_callback(struct urb *urb)
struct usb_serial_port *port = urb->context;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status = urb->status;
+ struct tty_struct *tty;
dbg("%s - port %d", __func__, port->number);
@@ -1818,7 +1828,9 @@ static void edge_bulk_out_callback(struct urb *urb)
}
/* send any buffered data */
- edge_send(port->port.tty);
+ tty = tty_port_tty_get(&port->port);
+ edge_send(tty);
+ tty_kref_put(tty);
}
static int edge_open(struct tty_struct *tty,
@@ -1876,7 +1888,7 @@ static int edge_open(struct tty_struct *tty,
/* set up the port settings */
if (tty)
- edge_set_termios(tty, port, port->port.tty->termios);
+ edge_set_termios(tty, port, tty->termios);
/* open up the port */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd9a2e1..2affa9c 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -764,13 +764,14 @@ static void ipaq_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a842025..480cac2 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -170,12 +170,13 @@ static void ipw_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index e59155c..45d4043 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -465,11 +465,12 @@ static void ir_read_bulk_callback(struct urb *urb)
ir_baud = *data & 0x0f;
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/*
* No break here.
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ddff37f..53710aa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -629,13 +629,14 @@ static void read_buf_callback(struct urb *urb)
}
dbg("%s - %i chars to write", __func__, urb->actual_length);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (data == NULL)
dbg("%s - data is NULL !!!", __func__);
if (tty && urb->actual_length && data) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
iuu_led_activity_on(urb);
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 704716f..15447af 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -430,7 +430,7 @@ static void usa26_indat_callback(struct urb *urb)
}
port = urb->context;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
/* 0x80 bit is error flag */
if ((data[0] & 0x80) == 0) {
@@ -459,6 +459,7 @@ static void usa26_indat_callback(struct urb *urb)
}
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
@@ -513,6 +514,7 @@ static void usa26_instat_callback(struct urb *urb)
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
+ struct tty_struct *tty;
int old_dcd_state, err;
int status = urb->status;
@@ -553,12 +555,11 @@ static void usa26_instat_callback(struct urb *urb)
p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -604,11 +605,12 @@ static void usa28_indat_callback(struct urb *urb)
p_priv = usb_get_serial_port_data(port);
data = urb->transfer_buffer;
- tty = port->port.tty;
- if (urb->actual_length) {
+ tty =tty_port_tty_get(&port->port);
+ if (tty && urb->actual_length) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
@@ -652,6 +654,7 @@ static void usa28_instat_callback(struct urb *urb)
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
+ struct tty_struct *tty;
int old_dcd_state;
int status = urb->status;
@@ -689,12 +692,11 @@ static void usa28_instat_callback(struct urb *urb)
p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if( old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -785,12 +787,11 @@ static void usa49_instat_callback(struct urb *urb)
p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -827,7 +828,7 @@ static void usa49_indat_callback(struct urb *urb)
}
port = urb->context;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
/* 0x80 bit is error flag */
if ((data[0] & 0x80) == 0) {
@@ -850,6 +851,7 @@ static void usa49_indat_callback(struct urb *urb)
}
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
@@ -893,7 +895,7 @@ static void usa49wg_indat_callback(struct urb *urb)
return;
}
port = serial->port[data[i++]];
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
len = data[i++];
/* 0x80 bit is error flag */
@@ -927,6 +929,7 @@ static void usa49wg_indat_callback(struct urb *urb)
}
if (port->port.count)
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
}
@@ -967,8 +970,8 @@ static void usa90_indat_callback(struct urb *urb)
port = urb->context;
p_priv = usb_get_serial_port_data(port);
- tty = port->port.tty;
if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
/* if current mode is DMA, looks like usa28 format
otherwise looks like usa26 data format */
@@ -1004,6 +1007,7 @@ static void usa90_indat_callback(struct urb *urb)
}
}
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -1025,6 +1029,7 @@ static void usa90_instat_callback(struct urb *urb)
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
+ struct tty_struct *tty;
int old_dcd_state, err;
int status = urb->status;
@@ -1053,12 +1058,11 @@ static void usa90_instat_callback(struct urb *urb)
p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -1130,12 +1134,11 @@ static void usa67_instat_callback(struct urb *urb)
p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -1332,7 +1335,7 @@ static void keyspan_close(struct tty_struct *tty,
stop_urb(p_priv->out_urbs[i]);
}
}
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
}
/* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 040040a..99e9a14 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -172,8 +172,9 @@ static void keyspan_pda_wakeup_write(struct work_struct *work)
struct keyspan_pda_private *priv =
container_of(work, struct keyspan_pda_private, wakeup_work);
struct usb_serial_port *port = priv->port;
-
- tty_wakeup(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -205,7 +206,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
static void keyspan_pda_rx_interrupt(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
unsigned char *data = urb->transfer_buffer;
int retval;
int status = urb->status;
@@ -222,7 +223,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, status);
- return;
+ goto out;
default:
dbg("%s - nonzero urb status received: %d",
__func__, status);
@@ -261,8 +262,11 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err("%s - usb_submit_urb failed with result %d",
- __func__, retval);
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed with result %d",
+ __func__, retval);
+out:
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b84dddc..ff3a07f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -658,7 +658,7 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
} else {
int bytes_sent = ((__u8 *) data)[0] +
((unsigned int) ((__u8 *) data)[1] << 8);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
/* we should immediately resubmit the URB, before attempting
* to pass the data on to the tty layer. But that needs locking
* against re-entry an then mixed-up data because of
@@ -679,6 +679,7 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
tty_buffer_request_room(tty, bytes_sent);
tty_insert_flip_string(tty, data + 2, bytes_sent);
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
/* again lockless, but debug info only */
priv->bytes_in += bytes_sent;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index deba28e..cfcf37c 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -383,7 +383,7 @@ static void kobil_read_int_callback(struct urb *urb)
return;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
/* BEGIN DEBUG */
@@ -405,6 +405,7 @@ static void kobil_read_int_callback(struct urb *urb)
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 0ded8bd..9b2cef8 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -563,10 +563,11 @@ static void mct_u232_read_int_callback(struct urb *urb)
* Work-a-round: handle the 'usual' bulk-in pipe here
*/
if (urb->transfer_buffer_length > 2) {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
goto exit;
}
@@ -591,7 +592,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
* to look in to this before committing any code.
*/
if (priv->last_lsr & MCT_U232_LSR_ERR) {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
/* Overrun Error */
if (priv->last_lsr & MCT_U232_LSR_OE) {
}
@@ -604,6 +605,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
/* Break Indicator */
if (priv->last_lsr & MCT_U232_LSR_BI) {
}
+ tty_kref_put(tty);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7c4917d..7b538ca 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -216,12 +216,13 @@ static void mos7720_bulk_in_callback(struct urb *urb)
data = urb->transfer_buffer;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
if (!port->read_urb) {
dbg("URB KILLED !!!");
@@ -262,10 +263,11 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
dbg("Entering .........");
- tty = mos7720_port->port->port.tty;
+ tty = tty_port_tty_get(&mos7720_port->port->port);
if (tty && mos7720_port->open)
tty_wakeup(tty);
+ tty_kref_put(tty);
}
/*
@@ -1267,29 +1269,6 @@ static int get_lsr_info(struct tty_struct *tty,
return 0;
}
-/*
- * get_number_bytes_avail - get number of bytes available
- *
- * Purpose: Let user call ioctl to get the count of number of bytes available.
- */
-static int get_number_bytes_avail(struct moschip_port *mos7720_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
- struct tty_struct *tty = mos7720_port->port->port.tty;
-
- if (!tty)
- return -ENOIOCTLCMD;
-
- result = tty->read_cnt;
-
- dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result);
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
-
- return -ENOIOCTLCMD;
-}
-
static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
unsigned int __user *value)
{
@@ -1409,13 +1388,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
- case TIOCINQ:
- /* return number of bytes available */
- dbg("%s (%d) TIOCINQ", __func__, port->number);
- return get_number_bytes_avail(mos7720_port,
- (unsigned int __user *)arg);
- break;
-
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(tty, mos7720_port,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 09d8206..60543d7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -709,12 +709,13 @@ static void mos7840_bulk_in_callback(struct urb *urb)
dbg("%s", "Entering ........... \n");
if (urb->actual_length) {
- tty = mos7840_port->port->port.tty;
+ tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
dbg(" %s \n", data);
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
mos7840_port->icount.rx += urb->actual_length;
smp_wmb();
@@ -773,10 +774,10 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
dbg("%s \n", "Entering .........");
- tty = mos7840_port->port->port.tty;
-
+ tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty && mos7840_port->open)
tty_wakeup(tty);
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index d673653..bcdcbb8 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -64,12 +64,13 @@ static void navman_read_int_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
exit:
result = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index ae8e227..c4d70b0 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -172,7 +172,7 @@ static int omninet_open(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
wport = serial->port[1];
- wport->port.tty = tty; /* FIXME */
+ tty_port_tty_set(&wport->port, tty);
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
@@ -229,9 +229,11 @@ static void omninet_read_bulk_callback(struct urb *urb)
}
if (urb->actual_length && header->oh_len) {
- tty_insert_flip_string(port->port.tty,
- data + OMNINET_DATAOFFSET, header->oh_len);
- tty_flip_buffer_push(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET,
+ header->oh_len);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
/* Continue trying to always read */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 73f8277..6b1727e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -571,14 +571,14 @@ static void option_indat_callback(struct urb *urb)
dbg("%s: nonzero status: %d on endpoint %02x.",
__func__, status, endpoint);
} else {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
- } else {
+ } else
dbg("%s: empty read urb received", __func__);
- }
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
if (port->port.count && status != -ESHUTDOWN) {
@@ -647,9 +647,13 @@ static void option_instat_callback(struct urb *urb)
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty) &&
- old_dcd_state && !portdata->dcd_state)
- tty_hangup(port->port.tty);
+ if (old_dcd_state && !portdata->dcd_state) {
+ struct tty_struct *tty =
+ tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
} else {
dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
@@ -793,7 +797,7 @@ static void option_close(struct tty_struct *tty,
for (i = 0; i < N_OUT_URB; i++)
usb_kill_urb(portdata->out_urbs[i]);
}
- port->port.tty = NULL; /* FIXME */
+ tty_port_tty_set(&port->port, NULL);
}
/* Helper functions used by option_setup_urbs */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 81db571..057f72a 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -1002,11 +1002,12 @@ static void oti6858_read_bulk_callback(struct urb *urb)
return;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty != NULL && urb->actual_length > 0) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* schedule the interrupt urb if we are still open */
if (port->port.count != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1ede144..ba74424 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1057,7 +1057,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __func__, tty_flag);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
@@ -1067,7 +1067,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
tty_insert_flip_char(tty, data[i], tty_flag);
tty_flip_buffer_push(tty);
}
-
+ tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
urb->dev = port->serial->dev;
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index def52d0..72903ac 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -217,6 +217,7 @@ static void safe_read_bulk_callback(struct urb *urb)
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
unsigned char length = urb->actual_length;
+ struct tty_struct *tty;
int result;
int status = urb->status;
@@ -242,6 +243,7 @@ static void safe_read_bulk_callback(struct urb *urb)
printk("\n");
}
#endif
+ tty = tty_port_tty_get(&port->port);
if (safe) {
__u16 fcs;
fcs = fcs_compute10(data, length, CRC10_INITFCS);
@@ -250,9 +252,9 @@ static void safe_read_bulk_callback(struct urb *urb)
if (actual_length <= (length - 2)) {
info("%s - actual: %d", __func__,
actual_length);
- tty_insert_flip_string(port->port.tty,
+ tty_insert_flip_string(tty,
data, actual_length);
- tty_flip_buffer_push(port->port.tty);
+ tty_flip_buffer_push(tty);
} else {
err("%s - inconsistent lengths %d:%d",
__func__, actual_length, length);
@@ -261,9 +263,10 @@ static void safe_read_bulk_callback(struct urb *urb)
err("%s - bad CRC %x", __func__, fcs);
}
} else {
- tty_insert_flip_string(port->port.tty, data, length);
- tty_flip_buffer_push(port->port.tty);
+ tty_insert_flip_string(tty, data, length);
+ tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(urb, port->serial->dev,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea1a103..8b9eaf3 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -440,14 +440,14 @@ static void sierra_indat_callback(struct urb *urb)
dbg("%s: nonzero status: %d on endpoint %02x.",
__func__, status, endpoint);
} else {
- tty = port->port.tty;
if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
- } else {
+ tty_kref_put(tty);
+ } else
dbg("%s: empty read urb received", __func__);
- }
/* Resubmit urb so we continue receiving */
if (port->port.count && status != -ESHUTDOWN) {
@@ -485,6 +485,7 @@ static void sierra_instat_callback(struct urb *urb)
unsigned char signals = *((unsigned char *)
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
+ struct tty_struct *tty;
dbg("%s: signal x%x", __func__, signals);
@@ -494,9 +495,11 @@ static void sierra_instat_callback(struct urb *urb)
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty) &&
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty) &&
old_dcd_state && !portdata->dcd_state)
- tty_hangup(port->port.tty);
+ tty_hangup(tty);
+ tty_kref_put(tty);
} else {
dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
@@ -616,8 +619,7 @@ static void sierra_close(struct tty_struct *tty,
}
usb_kill_urb(port->interrupt_in_urb);
-
- port->port.tty = NULL; /* FIXME */
+ tty_port_tty_set(&port->port, NULL);
}
static int sierra_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 283cf6b..1533d6e 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
tty_flag = TTY_FRAME;
dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
@@ -765,6 +765,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
tty_insert_flip_char(tty, data[i], tty_flag);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9a3e495..c90237d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -179,7 +179,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
static int ti_get_lsr(struct ti_port *tport);
static int ti_get_serial_info(struct ti_port *tport,
struct serial_struct __user *ret_arg);
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg);
static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
@@ -857,8 +857,8 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
(struct serial_struct __user *)arg);
case TIOCSSERIAL:
dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
- return ti_set_serial_info(tport,
- (struct serial_struct __user *)arg);
+ return ti_set_serial_info(tty, tport,
+ (struct serial_struct __user *)arg);
case TIOCMIWAIT:
dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = tport->tp_icount;
@@ -1211,6 +1211,7 @@ static void ti_bulk_in_callback(struct urb *urb)
struct device *dev = &urb->dev->dev;
int status = urb->status;
int retval = 0;
+ struct tty_struct *tty;
dbg("%s", __func__);
@@ -1239,20 +1240,22 @@ static void ti_bulk_in_callback(struct urb *urb)
return;
}
- if (port->port.tty && urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && urb->actual_length) {
usb_serial_debug_data(debug, dev, __func__,
urb->actual_length, urb->transfer_buffer);
if (!tport->tp_is_open)
dbg("%s - port closed, dropping data", __func__);
else
- ti_recv(&urb->dev->dev, port->port.tty,
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
spin_lock(&tport->tp_lock);
tport->tp_icount.rx += urb->actual_length;
spin_unlock(&tport->tp_lock);
+ tty_kref_put(tty);
}
exit:
@@ -1330,7 +1333,7 @@ static void ti_send(struct ti_port *tport)
{
int count, result;
struct usb_serial_port *port = tport->tp_port;
- struct tty_struct *tty = port->port.tty; /* FIXME */
+ struct tty_struct *tty = tty_port_tty_get(&port->port); /* FIXME */
unsigned long flags;
@@ -1338,19 +1341,15 @@ static void ti_send(struct ti_port *tport)
spin_lock_irqsave(&tport->tp_lock, flags);
- if (tport->tp_write_urb_in_use) {
- spin_unlock_irqrestore(&tport->tp_lock, flags);
- return;
- }
+ if (tport->tp_write_urb_in_use)
+ goto unlock;
count = ti_buf_get(tport->tp_write_buf,
port->write_urb->transfer_buffer,
port->bulk_out_size);
- if (count == 0) {
- spin_unlock_irqrestore(&tport->tp_lock, flags);
- return;
- }
+ if (count == 0)
+ goto unlock;
tport->tp_write_urb_in_use = 1;
@@ -1380,7 +1379,13 @@ static void ti_send(struct ti_port *tport)
/* more room in the buffer for new writes, wakeup */
if (tty)
tty_wakeup(tty);
+ tty_kref_put(tty);
wake_up_interruptible(&tport->tp_write_wait);
+ return;
+unlock:
+ spin_unlock_irqrestore(&tport->tp_lock, flags);
+ tty_kref_put(tty);
+ return;
}
@@ -1464,20 +1469,16 @@ static int ti_get_serial_info(struct ti_port *tport,
}
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg)
{
- struct usb_serial_port *port = tport->tp_port;
struct serial_struct new_serial;
if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- /* FIXME */
- if (port->port.tty)
- port->port.tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
return 0;
@@ -1510,7 +1511,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
tport->tp_msr = msr & TI_MSR_MASK;
/* handle CTS flow control */
- tty = tport->tp_port->port.tty;
+ tty = tty_port_tty_get(&tport->tp_port->port);
if (tty && C_CRTSCTS(tty)) {
if (msr & TI_MSR_CTS) {
tty->hw_stopped = 0;
@@ -1519,6 +1520,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
tty->hw_stopped = 1;
}
}
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4f7f9e3..e7d4246 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -214,7 +214,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
/* set up our port structure making the tty driver
* remember our port object, and us it */
tty->driver_data = port;
- port->port.tty = tty;
+ tty_port_tty_set(&port->port, tty);
if (port->port.count == 1) {
@@ -246,7 +246,7 @@ bailout_module_put:
bailout_mutex_unlock:
port->port.count = 0;
tty->driver_data = NULL;
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
mutex_unlock(&port->mutex);
bailout_kref_put:
usb_serial_put(serial);
@@ -276,10 +276,11 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
port->serial->type->close(tty, port, filp);
if (port->port.count == (port->console? 1 : 0)) {
- if (port->port.tty) {
- if (port->port.tty->driver_data)
- port->port.tty->driver_data = NULL;
- port->port.tty = NULL;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ if (tty->driver_data)
+ tty->driver_data = NULL;
+ tty_port_tty_set(&port->port, NULL);
}
}
@@ -508,11 +509,12 @@ static void usb_serial_port_work(struct work_struct *work)
if (!port)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty)
return;
tty_wakeup(tty);
+ tty_kref_put(tty);
}
static void port_release(struct device *dev)
@@ -819,6 +821,7 @@ int usb_serial_probe(struct usb_interface *interface,
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
goto probe_error;
+ tty_port_init(&port->port);
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
@@ -1040,8 +1043,11 @@ void usb_serial_disconnect(struct usb_interface *interface)
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
- if (port->port.tty)
- tty_hangup(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
kill_traffic(port);
}
}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index cf8924f..a6d1c75 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -499,7 +499,7 @@ static void visor_read_bulk_callback(struct urb *urb)
int status = urb->status;
struct tty_struct *tty;
int result;
- int available_room;
+ int available_room = 0;
dbg("%s - port %d", __func__, port->number);
@@ -512,13 +512,17 @@ static void visor_read_bulk_callback(struct urb *urb)
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
- if (tty && urb->actual_length) {
- available_room = tty_buffer_request_room(tty,
+ if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ available_room = tty_buffer_request_room(tty,
urb->actual_length);
- if (available_room) {
- tty_insert_flip_string(tty, data, available_room);
- tty_flip_buffer_push(tty);
+ if (available_room) {
+ tty_insert_flip_string(tty, data,
+ available_room);
+ tty_flip_buffer_push(tty);
+ }
+ tty_kref_put(tty);
}
spin_lock(&priv->lock);
priv->bytes_in += available_room;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 3a9d143..11c8b97 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1481,7 +1481,7 @@ static void rx_data_softint(struct work_struct *work)
struct whiteheat_private *info =
container_of(work, struct whiteheat_private, rx_work);
struct usb_serial_port *port = info->port;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
struct whiteheat_urb_wrap *wrap;
struct urb *urb;
unsigned long flags;
@@ -1493,7 +1493,7 @@ static void rx_data_softint(struct work_struct *work)
spin_lock_irqsave(&info->lock, flags);
if (info->flags & THROTTLED) {
spin_unlock_irqrestore(&info->lock, flags);
- return;
+ goto out;
}
list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
@@ -1513,7 +1513,7 @@ static void rx_data_softint(struct work_struct *work)
spin_unlock_irqrestore(&info->lock, flags);
tty_flip_buffer_push(tty);
schedule_work(&info->rx_work);
- return;
+ goto out;
}
tty_insert_flip_string(tty, urb->transfer_buffer, len);
sent += len;
@@ -1536,6 +1536,8 @@ static void rx_data_softint(struct work_struct *work)
if (sent)
tty_flip_buffer_push(tty);
+out:
+ tty_kref_put(tty);
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index b64d10b..c30ed8d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -182,6 +182,7 @@ struct signal_struct;
struct tty_port {
struct tty_struct *tty; /* Back pointer */
+ spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
int count; /* Usage count */
wait_queue_head_t open_wait; /* Open waiters */
@@ -405,6 +406,8 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
extern void tty_port_init(struct tty_port *port);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
+extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
Rather than blindly keep taking krefs we reorder the code in a few places
to pass the tty down to the right place (which is important as from the user
side it is not the case that tty == port->tty in all situations). For the irq
and related paths use the krefs to stop the tty being freed under us.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/isicom.c | 61 +++++++++++++++++++++++++------------------------
drivers/char/moxa.c | 61 +++++++++++++++++++++++++++++++------------------
2 files changed, 69 insertions(+), 53 deletions(-)
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 8f7cc19..7d30ee1 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -421,17 +421,16 @@ static void isicom_tx(unsigned long _data)
if (retries >= 100)
goto unlock;
+ tty = tty_port_tty_get(&port->port);
+ if (tty == NULL)
+ goto put_unlock;
+
for (; count > 0; count--, port++) {
/* port not active or tx disabled to force flow control */
if (!(port->port.flags & ASYNC_INITIALIZED) ||
!(port->status & ISI_TXOK))
continue;
- tty = port->port.tty;
-
- if (tty == NULL)
- continue;
-
txcount = min_t(short, TX_SIZE, port->xmit_cnt);
if (txcount <= 0 || tty->stopped || tty->hw_stopped)
continue;
@@ -489,6 +488,8 @@ static void isicom_tx(unsigned long _data)
tty_wakeup(tty);
}
+put_unlock:
+ tty_kref_put(tty);
unlock:
spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
/* schedule another tx for hopefully in about 10ms */
@@ -547,7 +548,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty == NULL) {
word_count = byte_count >> 1;
while (byte_count > 1) {
@@ -588,7 +589,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
}
if (port->port.flags & ASYNC_CTS_FLOW) {
- if (port->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (header & ISI_CTS) {
port->port.tty->hw_stopped = 0;
/* start tx ing */
@@ -597,7 +598,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
tty_wakeup(tty);
}
} else if (!(header & ISI_CTS)) {
- port->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
/* stop tx ing */
port->status &= ~(ISI_TXOK | ISI_CTS);
}
@@ -660,24 +661,21 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
}
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
+ tty_kref_put(tty);
return IRQ_HANDLED;
}
-static void isicom_config_port(struct isi_port *port)
+static void isicom_config_port(struct tty_struct *tty)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
- struct tty_struct *tty;
unsigned long baud;
unsigned long base = card->base;
u16 channel_setup, channel = port->channel,
shift_count = card->shift_count;
unsigned char flow_ctrl;
- tty = port->port.tty;
-
- if (tty == NULL)
- return;
/* FIXME: Switch to new tty baud API */
baud = C_BAUD(tty);
if (baud & CBAUDEX) {
@@ -690,7 +688,7 @@ static void isicom_config_port(struct isi_port *port)
/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
if (baud < 1 || baud > 4)
- port->port.tty->termios->c_cflag &= ~CBAUDEX;
+ tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
}
@@ -797,8 +795,9 @@ static inline void isicom_setup_board(struct isi_board *bp)
spin_unlock_irqrestore(&bp->card_lock, flags);
}
-static int isicom_setup_port(struct isi_port *port)
+static int isicom_setup_port(struct tty_struct *tty)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
@@ -808,8 +807,7 @@ static int isicom_setup_port(struct isi_port *port)
return -ENOMEM;
spin_lock_irqsave(&card->card_lock, flags);
- if (port->port.tty)
- clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
if (port->port.count == 1)
card->count++;
@@ -823,7 +821,7 @@ static int isicom_setup_port(struct isi_port *port)
InterruptTheCard(card->base);
}
- isicom_config_port(port);
+ isicom_config_port(tty);
port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -934,8 +932,8 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)
port->port.count++;
tty->driver_data = port;
- port->port.tty = tty;
- error = isicom_setup_port(port);
+ tty_port_tty_set(&port->port, tty);
+ error = isicom_setup_port(tty);
if (error == 0)
error = block_til_ready(tty, filp, port);
return error;
@@ -955,15 +953,17 @@ static void isicom_shutdown_port(struct isi_port *port)
struct isi_board *card = port->card;
struct tty_struct *tty;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
- if (!(port->port.flags & ASYNC_INITIALIZED))
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
+ tty_kref_put(tty);
return;
+ }
tty_port_free_xmit_buf(&port->port);
port->port.flags &= ~ASYNC_INITIALIZED;
/* 3rd October 2000 : Vinayak P Risbud */
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
/*Fix done by Anil .S on 30-04-2001
remote login through isi port has dtr toggle problem
@@ -1243,9 +1243,10 @@ static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
return 0;
}
-static int isicom_set_serial_info(struct isi_port *port,
- struct serial_struct __user *info)
+static int isicom_set_serial_info(struct tty_struct *tty,
+ struct serial_struct __user *info)
{
+ struct isi_port *port = tty->driver_data;
struct serial_struct newinfo;
int reconfig_port;
@@ -1276,7 +1277,7 @@ static int isicom_set_serial_info(struct isi_port *port,
if (reconfig_port) {
unsigned long flags;
spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_config_port(port);
+ isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
}
unlock_kernel();
@@ -1318,7 +1319,7 @@ static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
return isicom_get_serial_info(port, argp);
case TIOCSSERIAL:
- return isicom_set_serial_info(port, argp);
+ return isicom_set_serial_info(tty, argp);
default:
return -ENOIOCTLCMD;
@@ -1341,7 +1342,7 @@ static void isicom_set_termios(struct tty_struct *tty,
return;
spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_config_port(port);
+ isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1419,7 +1420,7 @@ static void isicom_hangup(struct tty_struct *tty)
port->port.count = 0;
port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
wake_up_interruptible(&port->port.open_wait);
}
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index d3d7864..5df4003 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -205,7 +205,7 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_shut_down(struct moxa_port *);
+static void moxa_shut_down(struct tty_struct *);
/*
* moxa board interface functions:
*/
@@ -217,7 +217,7 @@ static void MoxaPortLineCtrl(struct moxa_port *, int, int);
static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
static int MoxaPortLineStatus(struct moxa_port *);
static void MoxaPortFlushData(struct moxa_port *, int);
-static int MoxaPortWriteData(struct moxa_port *, const unsigned char *, int);
+static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
static int MoxaPortReadData(struct moxa_port *);
static int MoxaPortTxQueue(struct moxa_port *);
static int MoxaPortRxQueue(struct moxa_port *);
@@ -332,6 +332,7 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file,
for (i = 0; i < MAX_BOARDS; i++) {
p = moxa_boards[i].ports;
for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ struct tty_struct *ttyp;
memset(&tmp, 0, sizeof(tmp));
if (!moxa_boards[i].ready)
goto copy;
@@ -344,10 +345,12 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file,
if (status & 4)
tmp.dcd = 1;
- if (!p->port.tty || !p->port.tty->termios)
+ ttyp = tty_port_tty_get(&p->port);
+ if (!ttyp || !ttyp->termios)
tmp.cflag = p->cflag;
else
- tmp.cflag = p->port.tty->termios->c_cflag;
+ tmp.cflag = ttyp->termios->c_cflag;
+ tty_kref_put(tty);
copy:
if (copy_to_user(argm, &tmp, sizeof(tmp))) {
mutex_unlock(&moxa_openlock);
@@ -880,8 +883,14 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
/* pci hot-un-plug support */
for (a = 0; a < brd->numPorts; a++)
- if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
- tty_hangup(brd->ports[a].port.tty);
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
+ struct tty_struct *tty = tty_port_tty_get(
+ &brd->ports[a].port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+ }
while (1) {
opened = 0;
for (a = 0; a < brd->numPorts; a++)
@@ -1096,13 +1105,14 @@ static void __exit moxa_exit(void)
module_init(moxa_init);
module_exit(moxa_exit);
-static void moxa_close_port(struct moxa_port *ch)
+static void moxa_close_port(struct tty_struct *tty)
{
- moxa_shut_down(ch);
+ struct moxa_port *ch = tty->driver_data;
+ moxa_shut_down(tty);
MoxaPortFlushData(ch, 2);
ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- ch->port.tty->driver_data = NULL;
- ch->port.tty = NULL;
+ tty->driver_data = NULL;
+ tty_port_tty_set(&ch->port, NULL);
}
static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
@@ -1161,7 +1171,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
ch->port.count++;
tty->driver_data = ch;
- ch->port.tty = tty;
+ tty_port_tty_set(&ch->port, tty);
if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
@@ -1179,7 +1189,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
if (retval) {
if (ch->port.count) /* 0 means already hung up... */
if (--ch->port.count == 0)
- moxa_close_port(ch);
+ moxa_close_port(tty);
} else
ch->port.flags |= ASYNC_NORMAL_ACTIVE;
mutex_unlock(&moxa_openlock);
@@ -1219,7 +1229,7 @@ static void moxa_close(struct tty_struct *tty, struct file *filp)
tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
}
- moxa_close_port(ch);
+ moxa_close_port(tty);
unlock:
mutex_unlock(&moxa_openlock);
}
@@ -1234,7 +1244,7 @@ static int moxa_write(struct tty_struct *tty,
return 0;
spin_lock_bh(&moxa_lock);
- len = MoxaPortWriteData(ch, buf, count);
+ len = MoxaPortWriteData(tty, buf, count);
spin_unlock_bh(&moxa_lock);
ch->statusflags |= LOWWAIT;
@@ -1409,7 +1419,7 @@ static void moxa_hangup(struct tty_struct *tty)
return;
}
ch->port.count = 0;
- moxa_close_port(ch);
+ moxa_close_port(tty);
mutex_unlock(&moxa_openlock);
wake_up_interruptible(&ch->port.open_wait);
@@ -1417,11 +1427,14 @@ static void moxa_hangup(struct tty_struct *tty)
static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
{
+ struct tty_struct *tty;
dcd = !!dcd;
- if (dcd != p->DCDState && p->port.tty && C_CLOCAL(p->port.tty)) {
- if (!dcd)
- tty_hangup(p->port.tty);
+ if (dcd != p->DCDState) {
+ tty = tty_port_tty_get(&p->port);
+ if (tty && C_CLOCAL(tty) && !dcd)
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
p->DCDState = dcd;
}
@@ -1429,7 +1442,7 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
u16 __iomem *ip)
{
- struct tty_struct *tty = p->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&p->port);
void __iomem *ofsAddr;
unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
u16 intr;
@@ -1476,6 +1489,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
tty_insert_flip_char(tty, 0, TTY_BREAK);
tty_schedule_flip(tty);
}
+ tty_kref_put(tty);
if (intr & IntrLine)
moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
@@ -1560,9 +1574,9 @@ static void moxa_setup_empty_event(struct tty_struct *tty)
spin_unlock_bh(&moxa_lock);
}
-static void moxa_shut_down(struct moxa_port *ch)
+static void moxa_shut_down(struct tty_struct *tty)
{
- struct tty_struct *tp = ch->port.tty;
+ struct moxa_port *ch = tty->driver_data;
if (!(ch->port.flags & ASYNC_INITIALIZED))
return;
@@ -1572,7 +1586,7 @@ static void moxa_shut_down(struct moxa_port *ch)
/*
* If we're a modem control device and HUPCL is on, drop RTS & DTR.
*/
- if (C_HUPCL(tp))
+ if (C_HUPCL(tty))
MoxaPortLineCtrl(ch, 0, 0);
spin_lock_bh(&moxa_lock);
@@ -1953,9 +1967,10 @@ static int MoxaPortLineStatus(struct moxa_port *port)
return val;
}
-static int MoxaPortWriteData(struct moxa_port *port,
+static int MoxaPortWriteData(struct tty_struct *tty,
const unsigned char *buffer, int len)
{
+ struct moxa_port *port = tty->driver_data;
void __iomem *baseAddr, *ofsAddr, *ofs;
unsigned int c, total;
u16 head, tail, tx_mask, spage, epage;
Use tty_port_init and krefs in the stallion drivers to protect us from devices
going away underneath us. As with the other drives some rearranging is done to
pass the tty structure down properly on the user side.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/Kconfig | 4 +-
drivers/char/istallion.c | 107 +++++++++++++++++++++++++---------------------
drivers/char/stallion.c | 105 ++++++++++++++++++++++++++++-----------------
3 files changed, 123 insertions(+), 93 deletions(-)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index caff851..700ff96 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -350,7 +350,7 @@ config STALDRV
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
+ depends on STALDRV && (ISA || EISA || PCI)
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
@@ -361,7 +361,7 @@ config STALLION
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
+ depends on STALDRV && (ISA || EISA || PCI)
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 843a2af..96ee112 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -623,24 +623,25 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
static void stli_poll(unsigned long arg);
static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
-static int stli_initopen(struct stlibrd *brdp, struct stliport *portp);
+static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp);
-static int stli_setport(struct stliport *portp);
+static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
+ struct stliport *portp, struct file *filp);
+static int stli_setport(struct tty_struct *tty);
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
+static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
static void stli_read(struct stlibrd *brdp, struct stliport *portp);
static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
-static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp);
+static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp);
static int stli_getbrdstats(combrd_t __user *bp);
-static int stli_getportstats(struct stliport *portp, comstats_t __user *cp);
-static int stli_portcmdstats(struct stliport *portp);
+static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp);
+static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp);
static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
static int stli_getportstruct(struct stliport __user *arg);
static int stli_getbrdstruct(struct stlibrd __user *arg);
@@ -731,12 +732,16 @@ static void stli_cleanup_ports(struct stlibrd *brdp)
{
struct stliport *portp;
unsigned int j;
+ struct tty_struct *tty;
for (j = 0; j < STL_MAXPORTS; j++) {
portp = brdp->ports[j];
if (portp != NULL) {
- if (portp->port.tty != NULL)
- tty_hangup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty != NULL) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
kfree(portp);
}
}
@@ -824,7 +829,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
* requires several commands to the board we will need to wait for any
* other open that is already initializing the port.
*/
- portp->port.tty = tty;
+ tty_port_tty_set(&portp->port, tty);
tty->driver_data = portp;
portp->port.count++;
@@ -835,7 +840,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
- if ((rc = stli_initopen(brdp, portp)) >= 0) {
+ if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
portp->port.flags |= ASYNC_INITIALIZED;
clear_bit(TTY_IO_ERROR, &tty->flags);
}
@@ -864,7 +869,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
* then also we might have to wait for carrier.
*/
if (!(filp->f_flags & O_NONBLOCK)) {
- if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0)
+ if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0)
return rc;
}
portp->port.flags |= ASYNC_NORMAL_ACTIVE;
@@ -930,7 +935,7 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
stli_flushbuffer(tty);
tty->closing = 0;
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
if (portp->openwaitcnt) {
if (portp->close_delay)
@@ -952,9 +957,9 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
* this still all happens pretty quickly.
*/
-static int stli_initopen(struct stlibrd *brdp, struct stliport *portp)
+static int stli_initopen(struct tty_struct *tty,
+ struct stlibrd *brdp, struct stliport *portp)
{
- struct tty_struct *tty;
asynotify_t nt;
asyport_t aport;
int rc;
@@ -969,10 +974,7 @@ static int stli_initopen(struct stlibrd *brdp, struct stliport *portp)
sizeof(asynotify_t), 0)) < 0)
return rc;
- tty = portp->port.tty;
- if (tty == NULL)
- return -ENODEV;
- stli_mkasyport(portp, &aport, tty->termios);
+ stli_mkasyport(tty, portp, &aport, tty->termios);
if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
sizeof(asyport_t), 0)) < 0)
return rc;
@@ -1161,22 +1163,21 @@ static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned l
* waiting for the command to complete - so must have user context.
*/
-static int stli_setport(struct stliport *portp)
+static int stli_setport(struct tty_struct *tty)
{
+ struct stliport *portp = tty->driver_data;
struct stlibrd *brdp;
asyport_t aport;
if (portp == NULL)
return -ENODEV;
- if (portp->port.tty == NULL)
- return -ENODEV;
if (portp->brdnr >= stli_nrbrds)
return -ENODEV;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
return -ENODEV;
- stli_mkasyport(portp, &aport, portp->port.tty->termios);
+ stli_mkasyport(tty, portp, &aport, tty->termios);
return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
}
@@ -1187,7 +1188,8 @@ static int stli_setport(struct stliport *portp)
* maybe because if we are clocal then we don't need to wait...
*/
-static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp)
+static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
+ struct stliport *portp, struct file *filp)
{
unsigned long flags;
int rc, doclocal;
@@ -1195,7 +1197,7 @@ static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct
rc = 0;
doclocal = 0;
- if (portp->port.tty->termios->c_cflag & CLOCAL)
+ if (tty->termios->c_cflag & CLOCAL)
doclocal++;
spin_lock_irqsave(&stli_lock, flags);
@@ -1572,10 +1574,11 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s
* just quietly ignore any requests to change irq, etc.
*/
-static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp)
+static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
{
struct serial_struct sio;
int rc;
+ struct stliport *portp = tty->driver_data;
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
@@ -1594,7 +1597,7 @@ static int stli_setserial(struct stliport *portp, struct serial_struct __user *s
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- if ((rc = stli_setport(portp)) < 0)
+ if ((rc = stli_setport(tty)) < 0)
return rc;
return 0;
}
@@ -1685,17 +1688,17 @@ static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cm
rc = stli_getserial(portp, argp);
break;
case TIOCSSERIAL:
- rc = stli_setserial(portp, argp);
+ rc = stli_setserial(tty, argp);
break;
case STL_GETPFLAG:
rc = put_user(portp->pflag, (unsigned __user *)argp);
break;
case STL_SETPFLAG:
if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0)
- stli_setport(portp);
+ stli_setport(tty);
break;
case COM_GETPORTSTATS:
- rc = stli_getportstats(portp, argp);
+ rc = stli_getportstats(tty, portp, argp);
break;
case COM_CLRPORTSTATS:
rc = stli_clrportstats(portp, argp);
@@ -1742,7 +1745,7 @@ static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
tiosp = tty->termios;
- stli_mkasyport(portp, &aport, tiosp);
+ stli_mkasyport(tty, portp, &aport, tiosp);
stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0);
stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1);
stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
@@ -1854,7 +1857,7 @@ static void stli_hangup(struct tty_struct *tty)
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
portp->port.count = 0;
spin_unlock_irqrestore(&stli_lock, flags);
@@ -1998,7 +2001,7 @@ static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portn
char *sp, *uart;
int rc, cnt;
- rc = stli_portcmdstats(portp);
+ rc = stli_portcmdstats(NULL, portp);
uart = "UNKNOWN";
if (brdp->state & BST_STARTED) {
@@ -2188,7 +2191,7 @@ static void stli_read(struct stlibrd *brdp, struct stliport *portp)
if (test_bit(ST_RXSTOP, &portp->state))
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -2230,6 +2233,7 @@ static void stli_read(struct stlibrd *brdp, struct stliport *portp)
set_bit(ST_RXING, &portp->state);
tty_schedule_flip(tty);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -2362,7 +2366,7 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp)
if (ap->notify) {
nt = ap->changed;
ap->notify = 0;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (nt.signal & SG_DCD) {
oldsigs = portp->sigs;
@@ -2399,6 +2403,7 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp)
tty_schedule_flip(tty);
}
}
+ tty_kref_put(tty);
if (nt.data & DT_RXBUSY) {
donerx++;
@@ -2535,14 +2540,15 @@ static void stli_poll(unsigned long arg)
* the slave.
*/
-static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp)
+static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp,
+ asyport_t *pp, struct ktermios *tiosp)
{
memset(pp, 0, sizeof(asyport_t));
/*
* Start of by setting the baud, char size, parity and stop bit info.
*/
- pp->baudout = tty_get_baud_rate(portp->port.tty);
+ pp->baudout = tty_get_baud_rate(tty);
if ((tiosp->c_cflag & CBAUD) == B38400) {
if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
pp->baudout = 57600;
@@ -2695,7 +2701,7 @@ static int stli_initports(struct stlibrd *brdp)
printk("STALLION: failed to allocate port structure\n");
continue;
}
-
+ tty_port_init(&portp->port);
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
@@ -4220,7 +4226,7 @@ static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr,
* what port to get stats for (used through board control device).
*/
-static int stli_portcmdstats(struct stliport *portp)
+static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
{
unsigned long flags;
struct stlibrd *brdp;
@@ -4249,15 +4255,15 @@ static int stli_portcmdstats(struct stliport *portp)
stli_comstats.flags = portp->port.flags;
spin_lock_irqsave(&brd_lock, flags);
- if (portp->port.tty != NULL) {
- if (portp->port.tty->driver_data == portp) {
- stli_comstats.ttystate = portp->port.tty->flags;
+ if (tty != NULL) {
+ if (portp->port.tty == tty) {
+ stli_comstats.ttystate = tty->flags;
stli_comstats.rxbuffered = -1;
- if (portp->port.tty->termios != NULL) {
- stli_comstats.cflags = portp->port.tty->termios->c_cflag;
- stli_comstats.iflags = portp->port.tty->termios->c_iflag;
- stli_comstats.oflags = portp->port.tty->termios->c_oflag;
- stli_comstats.lflags = portp->port.tty->termios->c_lflag;
+ if (tty->termios != NULL) {
+ stli_comstats.cflags = tty->termios->c_cflag;
+ stli_comstats.iflags = tty->termios->c_iflag;
+ stli_comstats.oflags = tty->termios->c_oflag;
+ stli_comstats.lflags = tty->termios->c_lflag;
}
}
}
@@ -4294,7 +4300,8 @@ static int stli_portcmdstats(struct stliport *portp)
* what port to get stats for (used through board control device).
*/
-static int stli_getportstats(struct stliport *portp, comstats_t __user *cp)
+static int stli_getportstats(struct tty_struct *tty, struct stliport *portp,
+ comstats_t __user *cp)
{
struct stlibrd *brdp;
int rc;
@@ -4312,7 +4319,7 @@ static int stli_getportstats(struct stliport *portp, comstats_t __user *cp)
if (!brdp)
return -ENODEV;
- if ((rc = stli_portcmdstats(portp)) < 0)
+ if ((rc = stli_portcmdstats(tty, portp)) < 0)
return rc;
return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ?
@@ -4427,7 +4434,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
switch (cmd) {
case COM_GETPORTSTATS:
- rc = stli_getportstats(NULL, argp);
+ rc = stli_getportstats(NULL, NULL, argp);
done++;
break;
case COM_CLRPORTSTATS:
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 19db1eb..81b3234 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -405,9 +405,9 @@ static unsigned int stl_baudrates[] = {
static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
static int stl_brdinit(struct stlbrd *brdp);
-static int stl_getportstats(struct stlport *portp, comstats_t __user *cp);
+static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp);
static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp);
-static int stl_waitcarrier(struct stlport *portp, struct file *filp);
+static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, struct file *filp);
/*
* CD1400 uart specific handling functions.
@@ -612,8 +612,9 @@ static struct class *stallion_class;
static void stl_cd_change(struct stlport *portp)
{
unsigned int oldsigs = portp->sigs;
+ struct tty_struct *tty = tty_port_tty_get(&portp->port);
- if (!portp->port.tty)
+ if (!tty)
return;
portp->sigs = stl_getsignals(portp);
@@ -623,7 +624,8 @@ static void stl_cd_change(struct stlport *portp)
if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
if (portp->port.flags & ASYNC_CHECK_CD)
- tty_hangup(portp->port.tty);
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/*
@@ -734,7 +736,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
* On the first open of the device setup the port hardware, and
* initialize the per port data structure.
*/
- portp->port.tty = tty;
+ tty_port_tty_set(&portp->port, tty);
tty->driver_data = portp;
portp->port.count++;
@@ -774,7 +776,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
* then also we might have to wait for carrier.
*/
if (!(filp->f_flags & O_NONBLOCK))
- if ((rc = stl_waitcarrier(portp, filp)) != 0)
+ if ((rc = stl_waitcarrier(tty, portp, filp)) != 0)
return rc;
portp->port.flags |= ASYNC_NORMAL_ACTIVE;
@@ -789,7 +791,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp)
* maybe because if we are clocal then we don't need to wait...
*/
-static int stl_waitcarrier(struct stlport *portp, struct file *filp)
+static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp,
+ struct file *filp)
{
unsigned long flags;
int rc, doclocal;
@@ -801,7 +804,7 @@ static int stl_waitcarrier(struct stlport *portp, struct file *filp)
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->port.tty->termios->c_cflag & CLOCAL)
+ if (tty->termios->c_cflag & CLOCAL)
doclocal++;
portp->openwaitcnt++;
@@ -949,7 +952,7 @@ static void stl_close(struct tty_struct *tty, struct file *filp)
tty_ldisc_flush(tty);
tty->closing = 0;
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
if (portp->openwaitcnt) {
if (portp->close_delay)
@@ -1183,8 +1186,9 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
* just quietly ignore any requests to change irq, etc.
*/
-static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp)
+static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
{
+ struct stlport * portp = tty->driver_data;
struct serial_struct sio;
pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp);
@@ -1205,7 +1209,7 @@ static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp)
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- stl_setport(portp, portp->port.tty->termios);
+ stl_setport(portp, tty->termios);
return 0;
}
@@ -1282,10 +1286,10 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
rc = stl_getserial(portp, argp);
break;
case TIOCSSERIAL:
- rc = stl_setserial(portp, argp);
+ rc = stl_setserial(tty, argp);
break;
case COM_GETPORTSTATS:
- rc = stl_getportstats(portp, argp);
+ rc = stl_getportstats(tty, portp, argp);
break;
case COM_CLRPORTSTATS:
rc = stl_clrportstats(portp, argp);
@@ -1452,7 +1456,7 @@ static void stl_hangup(struct tty_struct *tty)
portp->tx.head = NULL;
portp->tx.tail = NULL;
}
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
portp->port.count = 0;
wake_up_interruptible(&portp->port.open_wait);
@@ -1805,7 +1809,7 @@ static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp)
"(size=%Zd)\n", sizeof(struct stlport));
break;
}
-
+ tty_port_init(&portp->port);
portp->magic = STL_PORTMAGIC;
portp->portnr = i;
portp->brdnr = panelp->brdnr;
@@ -1832,6 +1836,7 @@ static void stl_cleanup_panels(struct stlbrd *brdp)
struct stlpanel *panelp;
struct stlport *portp;
unsigned int j, k;
+ struct tty_struct *tty;
for (j = 0; j < STL_MAXPANELS; j++) {
panelp = brdp->panels[j];
@@ -1841,8 +1846,11 @@ static void stl_cleanup_panels(struct stlbrd *brdp)
portp = panelp->ports[k];
if (portp == NULL)
continue;
- if (portp->port.tty != NULL)
- stl_hangup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty != NULL) {
+ stl_hangup(tty);
+ tty_kref_put(tty);
+ }
kfree(portp->tx.buf);
kfree(portp);
}
@@ -2498,7 +2506,7 @@ static struct stlport *stl_getport(int brdnr, int panelnr, int portnr)
* what port to get stats for (used through board control device).
*/
-static int stl_getportstats(struct stlport *portp, comstats_t __user *cp)
+static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp)
{
comstats_t stl_comstats;
unsigned char *head, *tail;
@@ -2525,18 +2533,17 @@ static int stl_getportstats(struct stlport *portp, comstats_t __user *cp)
portp->stats.rxbuffered = 0;
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->port.tty != NULL)
- if (portp->port.tty->driver_data == portp) {
- portp->stats.ttystate = portp->port.tty->flags;
- /* No longer available as a statistic */
- portp->stats.rxbuffered = 1; /*portp->port.tty->flip.count; */
- if (portp->port.tty->termios != NULL) {
- portp->stats.cflags = portp->port.tty->termios->c_cflag;
- portp->stats.iflags = portp->port.tty->termios->c_iflag;
- portp->stats.oflags = portp->port.tty->termios->c_oflag;
- portp->stats.lflags = portp->port.tty->termios->c_lflag;
- }
+ if (tty != NULL && portp->port.tty == tty) {
+ portp->stats.ttystate = tty->flags;
+ /* No longer available as a statistic */
+ portp->stats.rxbuffered = 1; /*tty->flip.count; */
+ if (tty->termios != NULL) {
+ portp->stats.cflags = tty->termios->c_cflag;
+ portp->stats.iflags = tty->termios->c_iflag;
+ portp->stats.oflags = tty->termios->c_oflag;
+ portp->stats.lflags = tty->termios->c_lflag;
}
+ }
spin_unlock_irqrestore(&stallion_lock, flags);
head = portp->tx.head;
@@ -2640,7 +2647,7 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns
switch (cmd) {
case COM_GETPORTSTATS:
- rc = stl_getportstats(NULL, argp);
+ rc = stl_getportstats(NULL, NULL, argp);
break;
case COM_CLRPORTSTATS:
rc = stl_clrportstats(NULL, argp);
@@ -3243,7 +3250,7 @@ static void stl_cd1400flowctrl(struct stlport *portp, int state)
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -3288,6 +3295,7 @@ static void stl_cd1400flowctrl(struct stlport *portp, int state)
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -3305,7 +3313,7 @@ static void stl_cd1400sendflow(struct stlport *portp, int state)
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -3325,6 +3333,7 @@ static void stl_cd1400sendflow(struct stlport *portp, int state)
}
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -3478,6 +3487,7 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr)
int len, stlen;
char *head, *tail;
unsigned char ioack, srer;
+ struct tty_struct *tty;
pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
@@ -3504,8 +3514,11 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr)
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->port.tty)
- tty_wakeup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
if (len == 0) {
@@ -3569,7 +3582,7 @@ static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr)
return;
}
portp = panelp->ports[(ioack >> 3)];
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
outb((RDCR + portp->uartaddr), ioaddr);
@@ -3633,10 +3646,12 @@ static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr)
}
} else {
printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
+ tty_kref_put(tty);
return;
}
stl_rxalldone:
+ tty_kref_put(tty);
outb((EOSRR + portp->uartaddr), ioaddr);
outb(0, (ioaddr + EREG_DATA));
}
@@ -4175,7 +4190,7 @@ static void stl_sc26198flowctrl(struct stlport *portp, int state)
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -4226,6 +4241,7 @@ static void stl_sc26198flowctrl(struct stlport *portp, int state)
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -4244,7 +4260,7 @@ static void stl_sc26198sendflow(struct stlport *portp, int state)
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -4269,6 +4285,7 @@ static void stl_sc26198sendflow(struct stlport *portp, int state)
}
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -4408,6 +4425,7 @@ static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase)
static void stl_sc26198txisr(struct stlport *portp)
{
+ struct tty_struct *tty;
unsigned int ioaddr;
unsigned char mr0;
int len, stlen;
@@ -4422,8 +4440,11 @@ static void stl_sc26198txisr(struct stlport *portp)
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->port.tty)
- tty_wakeup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
if (len == 0) {
@@ -4476,7 +4497,7 @@ static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack)
pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
ioaddr = portp->ioaddr;
outb(GIBCR, (ioaddr + XP_ADDR));
len = inb(ioaddr + XP_DATA) + 1;
@@ -4515,6 +4536,7 @@ static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack)
stl_sc26198txunflow(portp, tty);
}
}
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -4528,7 +4550,7 @@ static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char
struct tty_struct *tty;
unsigned int ioaddr;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
ioaddr = portp->ioaddr;
if (status & SR_RXPARITY)
@@ -4566,6 +4588,7 @@ static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char
if (status == 0)
portp->stats.rxtotal++;
}
+ tty_kref_put(tty);
}
/*****************************************************************************/
We now have the infrastructure to sort this out but rather than teaching
the syscall tty lock rules we move the hard work into a tty helper
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 19 +++++++++++++++++++
fs/open.c | 3 +--
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 913b502..b5f57d0 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -730,6 +730,25 @@ void tty_vhangup(struct tty_struct *tty)
EXPORT_SYMBOL(tty_vhangup);
/**
+ * tty_vhangup_self - process vhangup for own ctty
+ *
+ * Perform a vhangup on the current controlling tty
+ */
+
+void tty_vhangup_self(void)
+{
+ struct tty_struct *tty;
+
+ mutex_lock(&tty_mutex);
+ tty = get_current_tty();
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
+ mutex_unlock(&tty_mutex);
+}
+
+/**
* tty_hung_up_p - was tty hung up
* @filp: file pointer of tty
*
diff --git a/fs/open.c b/fs/open.c
index 07da935..5596049 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1141,8 +1141,7 @@ EXPORT_SYMBOL(sys_close);
asmlinkage long sys_vhangup(void)
{
if (capable(CAP_SYS_TTY_CONFIG)) {
- /* XXX: this needs locking */
- tty_vhangup(current->signal->tty);
+ tty_vhangup_self();
return 0;
}
return -EPERM;
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/mxser.c | 192 +++++++++++++++++++++++++++-----------------------
1 files changed, 103 insertions(+), 89 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index b638403..308cb60 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -610,15 +610,16 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
return 0;
}
-static int mxser_set_baud(struct mxser_port *info, long newspd)
+static int mxser_set_baud(struct tty_struct *tty, long newspd)
{
+ struct mxser_port *info = tty->driver_data;
int quot = 0, baud;
unsigned char cval;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!tty->termios)
return -1;
- if (!(info->ioaddr))
+ if (!info->ioaddr)
return -1;
if (newspd > info->max_baud)
@@ -626,13 +627,13 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
if (newspd == 134) {
quot = 2 * info->baud_base / 269;
- tty_encode_baud_rate(info->port.tty, 134, 134);
+ tty_encode_baud_rate(tty, 134, 134);
} else if (newspd) {
quot = info->baud_base / newspd;
if (quot == 0)
quot = 1;
baud = info->baud_base/quot;
- tty_encode_baud_rate(info->port.tty, baud, baud);
+ tty_encode_baud_rate(tty, baud, baud);
} else {
quot = 0;
}
@@ -658,7 +659,7 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
#ifdef BOTHER
- if (C_BAUD(info->port.tty) == BOTHER) {
+ if (C_BAUD(tty) == BOTHER) {
quot = info->baud_base % newspd;
quot *= 8;
if (quot % newspd > newspd / 2) {
@@ -679,21 +680,22 @@ static int mxser_set_baud(struct mxser_port *info, long newspd)
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static int mxser_change_speed(struct mxser_port *info,
- struct ktermios *old_termios)
+static int mxser_change_speed(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
+ struct mxser_port *info = tty->driver_data;
unsigned cflag, cval, fcr;
int ret = 0;
unsigned char status;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!tty->termios)
return ret;
- cflag = info->port.tty->termios->c_cflag;
- if (!(info->ioaddr))
+ cflag = tty->termios->c_cflag;
+ if (!info->ioaddr)
return ret;
- if (mxser_set_baud_method[info->port.tty->index] == 0)
- mxser_set_baud(info, tty_get_baud_rate(info->port.tty));
+ if (mxser_set_baud_method[tty->index] == 0)
+ mxser_set_baud(tty, tty_get_baud_rate(tty));
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -762,9 +764,9 @@ static int mxser_change_speed(struct mxser_port *info,
info->MCR |= UART_MCR_AFE;
} else {
status = inb(info->ioaddr + UART_MSR);
- if (info->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
- info->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
if (info->type != PORT_16550A &&
!info->board->chip_flag) {
outb(info->IER & ~UART_IER_THRI,
@@ -774,11 +776,11 @@ static int mxser_change_speed(struct mxser_port *info,
outb(info->IER, info->ioaddr +
UART_IER);
}
- tty_wakeup(info->port.tty);
+ tty_wakeup(tty);
}
} else {
if (!(status & UART_MSR_CTS)) {
- info->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
if ((info->type != PORT_16550A) &&
(!info->board->chip_flag)) {
info->IER &= ~UART_IER_THRI;
@@ -804,21 +806,21 @@ static int mxser_change_speed(struct mxser_port *info,
* Set up parity check flag
*/
info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (I_INPCK(info->port.tty))
+ if (I_INPCK(tty))
info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ if (I_BRKINT(tty) || I_PARMRK(tty))
info->read_status_mask |= UART_LSR_BI;
info->ignore_status_mask = 0;
- if (I_IGNBRK(info->port.tty)) {
+ if (I_IGNBRK(tty)) {
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->port.tty)) {
+ if (I_IGNPAR(tty)) {
info->ignore_status_mask |=
UART_LSR_OE |
UART_LSR_PE |
@@ -830,16 +832,16 @@ static int mxser_change_speed(struct mxser_port *info,
}
}
if (info->board->chip_flag) {
- mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->port.tty));
- mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->port.tty));
- if (I_IXON(info->port.tty)) {
+ mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
+ mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
+ if (I_IXON(tty)) {
mxser_enable_must_rx_software_flow_control(
info->ioaddr);
} else {
mxser_disable_must_rx_software_flow_control(
info->ioaddr);
}
- if (I_IXOFF(info->port.tty)) {
+ if (I_IXOFF(tty)) {
mxser_enable_must_tx_software_flow_control(
info->ioaddr);
} else {
@@ -855,7 +857,8 @@ static int mxser_change_speed(struct mxser_port *info,
return ret;
}
-static void mxser_check_modem_status(struct mxser_port *port, int status)
+static void mxser_check_modem_status(struct tty_struct *tty,
+ struct mxser_port *port, int status)
{
/* update input line counters */
if (status & UART_MSR_TERI)
@@ -874,10 +877,11 @@ static void mxser_check_modem_status(struct mxser_port *port, int status)
wake_up_interruptible(&port->port.open_wait);
}
+ tty = tty_port_tty_get(&port->port);
if (port->port.flags & ASYNC_CTS_FLOW) {
- if (port->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
- port->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
if ((port->type != PORT_16550A) &&
(!port->board->chip_flag)) {
@@ -887,11 +891,11 @@ static void mxser_check_modem_status(struct mxser_port *port, int status)
outb(port->IER, port->ioaddr +
UART_IER);
}
- tty_wakeup(port->port.tty);
+ tty_wakeup(tty);
}
} else {
if (!(status & UART_MSR_CTS)) {
- port->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
if (port->type != PORT_16550A &&
!port->board->chip_flag) {
port->IER &= ~UART_IER_THRI;
@@ -903,8 +907,9 @@ static void mxser_check_modem_status(struct mxser_port *port, int status)
}
}
-static int mxser_startup(struct mxser_port *info)
+static int mxser_startup(struct tty_struct *tty)
{
+ struct mxser_port *info = tty->driver_data;
unsigned long page;
unsigned long flags;
@@ -921,8 +926,7 @@ static int mxser_startup(struct mxser_port *info)
}
if (!info->ioaddr || !info->type) {
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
@@ -952,8 +956,8 @@ static int mxser_startup(struct mxser_port *info)
if (inb(info->ioaddr + UART_LSR) == 0xff) {
spin_unlock_irqrestore(&info->slock, flags);
if (capable(CAP_SYS_ADMIN)) {
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ if (tty)
+ set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
} else
return -ENODEV;
@@ -991,14 +995,13 @@ static int mxser_startup(struct mxser_port *info)
(void) inb(info->ioaddr + UART_IIR);
(void) inb(info->ioaddr + UART_MSR);
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
- mxser_change_speed(info, NULL);
+ mxser_change_speed(tty, NULL);
info->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->slock, flags);
@@ -1009,8 +1012,9 @@ static int mxser_startup(struct mxser_port *info)
* This routine will shutdown a serial port; interrupts maybe disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
-static void mxser_shutdown(struct mxser_port *info)
+static void mxser_shutdown(struct tty_struct *tty)
{
+ struct mxser_port *info = tty->driver_data;
unsigned long flags;
if (!(info->port.flags & ASYNC_INITIALIZED))
@@ -1035,7 +1039,7 @@ static void mxser_shutdown(struct mxser_port *info)
info->IER = 0;
outb(0x00, info->ioaddr + UART_IER);
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
+ if (tty->termios->c_cflag & HUPCL)
info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
outb(info->MCR, info->ioaddr + UART_MCR);
@@ -1051,8 +1055,7 @@ static void mxser_shutdown(struct mxser_port *info)
/* read data port to reset things */
(void) inb(info->ioaddr + UART_RX);
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags &= ~ASYNC_INITIALIZED;
@@ -1084,14 +1087,14 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
return -ENODEV;
tty->driver_data = info;
- info->port.tty = tty;
+ tty_port_tty_set(&info->port, tty);
/*
* Start up serial port
*/
spin_lock_irqsave(&info->slock, flags);
info->port.count++;
spin_unlock_irqrestore(&info->slock, flags);
- retval = mxser_startup(info);
+ retval = mxser_startup(tty);
if (retval)
return retval;
@@ -1209,13 +1212,13 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
break;
}
}
- mxser_shutdown(info);
+ mxser_shutdown(tty);
mxser_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
- info->port.tty = NULL;
+ tty_port_tty_set(&info->port, NULL);
if (info->port.blocked_open) {
if (info->port.close_delay)
schedule_timeout_interruptible(info->port.close_delay);
@@ -1337,12 +1340,13 @@ static int mxser_chars_in_buffer(struct tty_struct *tty)
* friends of mxser_ioctl()
* ------------------------------------------------------------
*/
-static int mxser_get_serial_info(struct mxser_port *info,
+static int mxser_get_serial_info(struct tty_struct *tty,
struct serial_struct __user *retinfo)
{
+ struct mxser_port *info = tty->driver_data;
struct serial_struct tmp = {
.type = info->type,
- .line = info->port.tty->index,
+ .line = tty->index,
.port = info->ioaddr,
.irq = info->board->irq,
.flags = info->port.flags,
@@ -1357,9 +1361,10 @@ static int mxser_get_serial_info(struct mxser_port *info,
return 0;
}
-static int mxser_set_serial_info(struct mxser_port *info,
+static int mxser_set_serial_info(struct tty_struct *tty,
struct serial_struct __user *new_info)
{
+ struct mxser_port *info = tty->driver_data;
struct serial_struct new_serial;
speed_t baud;
unsigned long sl_flags;
@@ -1393,14 +1398,14 @@ static int mxser_set_serial_info(struct mxser_port *info,
(new_serial.flags & ASYNC_FLAGS));
info->port.close_delay = new_serial.close_delay * HZ / 100;
info->port.closing_wait = new_serial.closing_wait * HZ / 100;
- info->port.tty->low_latency =
- (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY)
+ ? 1 : 0;
if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
(new_serial.baud_base != info->baud_base ||
new_serial.custom_divisor !=
info->custom_divisor)) {
baud = new_serial.baud_base / new_serial.custom_divisor;
- tty_encode_baud_rate(info->port.tty, baud, baud);
+ tty_encode_baud_rate(tty, baud, baud);
}
}
@@ -1411,11 +1416,11 @@ static int mxser_set_serial_info(struct mxser_port *info,
if (info->port.flags & ASYNC_INITIALIZED) {
if (flags != (info->port.flags & ASYNC_SPD_MASK)) {
spin_lock_irqsave(&info->slock, sl_flags);
- mxser_change_speed(info, NULL);
+ mxser_change_speed(tty, NULL);
spin_unlock_irqrestore(&info->slock, sl_flags);
}
} else
- retval = mxser_startup(info);
+ retval = mxser_startup(tty);
return retval;
}
@@ -1461,7 +1466,7 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
spin_lock_irqsave(&info->slock, flags);
status = inb(info->ioaddr + UART_MSR);
if (status & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(info, status);
+ mxser_check_modem_status(tty, info, status);
spin_unlock_irqrestore(&info->slock, flags);
return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
@@ -1606,6 +1611,7 @@ static int __init mxser_read_register(int port, unsigned short *regs)
static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
{
struct mxser_port *port;
+ struct tty_struct *tty;
int result, status;
unsigned int i, j;
int ret = 0;
@@ -1643,12 +1649,14 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
if (!port->ioaddr)
goto copy;
+
+ tty = tty_port_tty_get(&port->port);
- if (!port->port.tty || !port->port.tty->termios)
+ if (!tty || !tty->termios)
ms.cflag = port->normal_termios.c_cflag;
else
- ms.cflag = port->port.tty->termios->c_cflag;
-
+ ms.cflag = tty->termios->c_cflag;
+ tty_kref_put(tty);
status = inb(port->ioaddr + UART_MSR);
if (status & UART_MSR_DCD)
ms.dcd = 1;
@@ -1704,15 +1712,18 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
me->up_txcnt[p] = port->mon_data.up_txcnt;
me->modem_status[p] =
port->mon_data.modem_status;
- me->baudrate[p] = tty_get_baud_rate(port->port.tty);
+ tty = tty_port_tty_get(&port->port);
- if (!port->port.tty || !port->port.tty->termios) {
+ if (!tty || !tty->termios) {
cflag = port->normal_termios.c_cflag;
iflag = port->normal_termios.c_iflag;
+ me->baudrate[p] = tty_termios_baud_rate(&port->normal_termios);
} else {
- cflag = port->port.tty->termios->c_cflag;
- iflag = port->port.tty->termios->c_iflag;
+ cflag = tty->termios->c_cflag;
+ iflag = tty->termios->c_iflag;
+ me->baudrate[p] = tty_get_baud_rate(tty);
}
+ tty_kref_put(tty);
me->databits[p] = cflag & CSIZE;
me->stopbits[p] = cflag & CSTOPB;
@@ -1822,12 +1833,12 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
switch (cmd) {
case TIOCGSERIAL:
lock_kernel();
- retval = mxser_get_serial_info(info, argp);
+ retval = mxser_get_serial_info(tty, argp);
unlock_kernel();
return retval;
case TIOCSSERIAL:
lock_kernel();
- retval = mxser_set_serial_info(info, argp);
+ retval = mxser_set_serial_info(tty, argp);
unlock_kernel();
return retval;
case TIOCSERGETLSR: /* Get line status register */
@@ -1896,7 +1907,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
lock_kernel();
status = mxser_get_msr(info->ioaddr, 1, tty->index);
- mxser_check_modem_status(info, status);
+ mxser_check_modem_status(tty, info, status);
mcr = inb(info->ioaddr + UART_MCR);
if (mcr & MOXA_MUST_MCR_XON_FLAG)
@@ -1909,7 +1920,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
else
info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
- if (info->port.tty->hw_stopped)
+ if (tty->hw_stopped)
info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
else
info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
@@ -1958,7 +1969,7 @@ static void mxser_stoprx(struct tty_struct *tty)
}
}
- if (info->port.tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios->c_cflag & CRTSCTS) {
info->MCR &= ~UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -1995,7 +2006,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
}
}
- if (info->port.tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios->c_cflag & CRTSCTS) {
info->MCR |= UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -2040,7 +2051,7 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
- mxser_change_speed(info, old_termios);
+ mxser_change_speed(tty, old_termios);
spin_unlock_irqrestore(&info->slock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
@@ -2138,10 +2149,10 @@ static void mxser_hangup(struct tty_struct *tty)
struct mxser_port *info = tty->driver_data;
mxser_flush_buffer(tty);
- mxser_shutdown(info);
+ mxser_shutdown(tty);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- info->port.tty = NULL;
+ tty_port_tty_set(&info->port, NULL);
wake_up_interruptible(&info->port.open_wait);
}
@@ -2164,9 +2175,9 @@ static int mxser_rs_break(struct tty_struct *tty, int break_state)
return 0;
}
-static void mxser_receive_chars(struct mxser_port *port, int *status)
+static void mxser_receive_chars(struct tty_struct *tty,
+ struct mxser_port *port, int *status)
{
- struct tty_struct *tty = port->port.tty;
unsigned char ch, gdl;
int ignored = 0;
int cnt = 0;
@@ -2174,9 +2185,8 @@ static void mxser_receive_chars(struct mxser_port *port, int *status)
int max = 256;
recv_room = tty->receive_room;
- if ((recv_room == 0) && (!port->ldisc_stop_rx))
+ if (recv_room == 0 && !port->ldisc_stop_rx)
mxser_stoprx(tty);
-
if (port->board->chip_flag != MOXA_OTHER_UART) {
if (*status & UART_LSR_SPECIAL)
@@ -2253,7 +2263,7 @@ intr_old:
} while (*status & UART_LSR_DR);
end_intr:
- mxvar_log.rxcnt[port->port.tty->index] += cnt;
+ mxvar_log.rxcnt[tty->index] += cnt;
port->mon_data.rxcnt += cnt;
port->mon_data.up_rxcnt += cnt;
@@ -2267,14 +2277,14 @@ end_intr:
spin_lock(&port->slock);
}
-static void mxser_transmit_chars(struct mxser_port *port)
+static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
{
int count, cnt;
if (port->x_char) {
outb(port->x_char, port->ioaddr + UART_TX);
port->x_char = 0;
- mxvar_log.txcnt[port->port.tty->index]++;
+ mxvar_log.txcnt[tty->index]++;
port->mon_data.txcnt++;
port->mon_data.up_txcnt++;
port->icount.tx++;
@@ -2284,8 +2294,8 @@ static void mxser_transmit_chars(struct mxser_port *port)
if (port->port.xmit_buf == NULL)
return;
- if ((port->xmit_cnt <= 0) || port->port.tty->stopped ||
- (port->port.tty->hw_stopped &&
+ if (port->xmit_cnt <= 0 || tty->stopped ||
+ (tty->hw_stopped &&
(port->type != PORT_16550A) &&
(!port->board->chip_flag))) {
port->IER &= ~UART_IER_THRI;
@@ -2302,14 +2312,14 @@ static void mxser_transmit_chars(struct mxser_port *port)
if (--port->xmit_cnt <= 0)
break;
} while (--count > 0);
- mxvar_log.txcnt[port->port.tty->index] += (cnt - port->xmit_cnt);
+ mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
port->mon_data.txcnt += (cnt - port->xmit_cnt);
port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
port->icount.tx += (cnt - port->xmit_cnt);
- if (port->xmit_cnt < WAKEUP_CHARS)
- tty_wakeup(port->port.tty);
+ if (port->xmit_cnt < WAKEUP_CHARS && tty)
+ tty_wakeup(tty);
if (port->xmit_cnt <= 0) {
port->IER &= ~UART_IER_THRI;
@@ -2328,6 +2338,7 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id)
int max, irqbits, bits, msr;
unsigned int int_cnt, pass_counter = 0;
int handled = IRQ_NONE;
+ struct tty_struct *tty;
for (i = 0; i < MXSER_BOARDS; i++)
if (dev_id == &mxser_boards[i]) {
@@ -2360,13 +2371,15 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id)
if (iir & UART_IIR_NO_INT)
break;
iir &= MOXA_MUST_IIR_MASK;
- if (!port->port.tty ||
+ tty = tty_port_tty_get(&port->port);
+ if (!tty ||
(port->port.flags & ASYNC_CLOSING) ||
!(port->port.flags &
ASYNC_INITIALIZED)) {
status = inb(port->ioaddr + UART_LSR);
outb(0x27, port->ioaddr + UART_FCR);
inb(port->ioaddr + UART_MSR);
+ tty_kref_put(tty);
break;
}
@@ -2387,27 +2400,28 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id)
iir == MOXA_MUST_IIR_RDA ||
iir == MOXA_MUST_IIR_RTO ||
iir == MOXA_MUST_IIR_LSR)
- mxser_receive_chars(port,
+ mxser_receive_chars(tty, port,
&status);
} else {
status &= port->read_status_mask;
if (status & UART_LSR_DR)
- mxser_receive_chars(port,
+ mxser_receive_chars(tty, port,
&status);
}
msr = inb(port->ioaddr + UART_MSR);
if (msr & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(port, msr);
+ mxser_check_modem_status(tty, port, msr);
if (port->board->chip_flag) {
if (iir == 0x02 && (status &
UART_LSR_THRE))
- mxser_transmit_chars(port);
+ mxser_transmit_chars(tty, port);
} else {
if (status & UART_LSR_THRE)
- mxser_transmit_chars(port);
+ mxser_transmit_chars(tty, port);
}
+ tty_kref_put(tty);
} while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
spin_unlock(&port->slock);
}
Currently it is sometimes locked by the tty mutex and sometimes by the
sighand lock. The latter is in fact correct and now we can hand back referenced
objects we can fix this up without problems around sleeping functions.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 18 ++++--------------
fs/dquot.c | 2 --
include/linux/tty.h | 1 +
security/selinux/hooks.c | 2 --
4 files changed, 5 insertions(+), 18 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index b5f57d0..f40298e 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -739,13 +739,11 @@ void tty_vhangup_self(void)
{
struct tty_struct *tty;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
if (tty) {
tty_vhangup(tty);
tty_kref_put(tty);
}
- mutex_unlock(&tty_mutex);
}
/**
@@ -801,11 +799,9 @@ void disassociate_ctty(int on_exit)
struct pid *tty_pgrp = NULL;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
- mutex_unlock(&tty_mutex);
lock_kernel();
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
@@ -822,7 +818,6 @@ void disassociate_ctty(int on_exit)
kill_pgrp(old_pgrp, SIGCONT, on_exit);
put_pid(old_pgrp);
}
- mutex_unlock(&tty_mutex);
return;
}
if (tty_pgrp) {
@@ -837,7 +832,6 @@ void disassociate_ctty(int on_exit)
current->signal->tty_old_pgrp = NULL;
spin_unlock_irq(¤t->sighand->siglock);
- mutex_lock(&tty_mutex);
tty = get_current_tty();
if (tty) {
unsigned long flags;
@@ -854,7 +848,6 @@ void disassociate_ctty(int on_exit)
" = NULL", tty);
#endif
}
- mutex_unlock(&tty_mutex);
/* Now clear signal->tty under the lock */
read_lock(&tasklist_lock);
@@ -3180,14 +3173,11 @@ static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
struct tty_struct *get_current_tty(void)
{
struct tty_struct *tty;
- WARN_ON_ONCE(!mutex_is_locked(&tty_mutex));
+ unsigned long flags;
+
+ spin_lock_irqsave(¤t->sighand->siglock, flags);
tty = tty_kref_get(current->signal->tty);
- /*
- * session->tty can be changed/cleared from under us, make sure we
- * issue the load. The obtained pointer, when not NULL, is valid as
- * long as we hold tty_mutex.
- */
- barrier();
+ spin_unlock_irqrestore(¤t->sighand->siglock, flags);
return tty;
}
EXPORT_SYMBOL_GPL(get_current_tty);
diff --git a/fs/dquot.c b/fs/dquot.c
index 7417a6c..ad7e590 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -895,9 +895,7 @@ static void print_warning(struct dquot *dquot, const int warntype)
warntype == QUOTA_NL_BSOFTBELOW || !need_print_warning(dquot))
return;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
- mutex_unlock(&tty_mutex);
if (!tty)
return;
tty_write_message(tty, dquot->dq_sb->s_id);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index c30ed8d..e00393a 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -361,6 +361,7 @@ extern int is_ignored(int sig);
extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
+extern void tty_vhangup_self(void);
extern void tty_unhangup(struct file *filp);
extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index c856db8..215cddd 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2120,9 +2120,7 @@ static inline void flush_unauthorized_files(struct files_struct *files)
long j = -1;
int drop_tty = 0;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
- mutex_unlock(&tty_mutex);
if (tty) {
file_list_lock();
file = list_entry(tty->tty_files.next, typeof(*file), f_u.fu_list);
The open path for ptmx slaves is via the ptmx device. Opening them any
other way is not allowed. Vegard Nossum found that previously this was not
the case and mknod foo c 128 42; cat foo would produce nasty diagnostics
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 18 ++++++++++++------
1 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f40298e..2e96ce0 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1227,7 +1227,8 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
* init_dev - initialise a tty device
* @driver: tty driver we are opening a device on
* @idx: device index
- * @tty: returned tty structure
+ * @ret_tty: returned tty structure
+ * @first_ok: ok to open a new device (used by ptmx)
*
* Prepare a tty device. This may not be a "new" clean device but
* could also be an active device. The pty drivers require special
@@ -1248,7 +1249,7 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
*/
static int init_dev(struct tty_driver *driver, int idx,
- struct tty_struct **ret_tty)
+ struct tty_struct **ret_tty, int first_ok)
{
struct tty_struct *tty, *o_tty;
struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
@@ -1279,6 +1280,11 @@ static int init_dev(struct tty_driver *driver, int idx,
}
if (tty) goto fast_track;
+ if (driver->subtype == PTY_TYPE_MASTER &&
+ (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
+ retval = -EIO;
+ goto end_init;
+ }
/*
* First time open is complex, especially for PTY devices.
* This code guarantees that either everything succeeds and the
@@ -1413,7 +1419,7 @@ static int init_dev(struct tty_driver *driver, int idx,
if (retval)
goto release_mem_out;
- goto success;
+ goto success;
/*
* This fast open can be used if the tty is already open.
@@ -1795,7 +1801,7 @@ static void release_dev(struct file *filp)
}
/**
- * tty_open - open a tty device
+ * __tty_open - open a tty device
* @inode: inode of device file
* @filp: file pointer to tty
*
@@ -1874,7 +1880,7 @@ retry_open:
return -ENODEV;
}
got_driver:
- retval = init_dev(driver, index, &tty);
+ retval = init_dev(driver, index, &tty, 0);
mutex_unlock(&tty_mutex);
if (retval)
return retval;
@@ -1971,7 +1977,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
return index;
mutex_lock(&tty_mutex);
- retval = init_dev(ptm_driver, index, &tty);
+ retval = init_dev(ptm_driver, index, &tty, 1);
mutex_unlock(&tty_mutex);
if (retval)
For hysterical raisins the vt layer drops and retakes locks in the write
method. This is a left over from the days when user/kernel data was passed
directly to the tty not pre-buffered.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/vt.c | 18 ------------------
1 files changed, 0 insertions(+), 18 deletions(-)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 05ca1c5..ec94521 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2136,27 +2136,9 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
release_console_sem();
return 0;
}
- release_console_sem();
-
orig_buf = buf;
orig_count = count;
- /* At this point 'buf' is guaranteed to be a kernel buffer
- * and therefore no access to userspace (and therefore sleeping)
- * will be needed. The con_buf_mtx serializes all tty based
- * console rendering and vcs write/read operations. We hold
- * the console spinlock during the entire write.
- */
-
- acquire_console_sem();
-
- vc = tty->driver_data;
- if (vc == NULL) {
- printk(KERN_ERR "vt: argh, driver_data _became_ NULL !\n");
- release_console_sem();
- goto out;
- }
-
himask = vc->vc_hi_font_mask;
charmask = himask ? 0x1ff : 0xff;
Various people outside the tty layer still stick their noses in behind the
scenes. We need to make sure they also obey the locking and referencing rules.
Signed-off-by: Alan Cox <[email protected]>
---
kernel/acct.c | 2 +-
kernel/auditsc.c | 9 ++++-----
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/kernel/acct.c b/kernel/acct.c
index dd68b90..f6006a6 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -548,7 +548,7 @@ static void do_acct_process(struct bsd_acct_struct *acct,
#endif
spin_lock_irq(¤t->sighand->siglock);
- tty = current->signal->tty;
+ tty = current->signal->tty; /* Safe as we hold the siglock */
ac.ac_tty = tty ? old_encode_dev(tty_devnum(tty)) : 0;
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_utime)));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_stime)));
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 59cedfb..cf5bc2f 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -246,8 +246,8 @@ static int audit_match_perm(struct audit_context *ctx, int mask)
unsigned n;
if (unlikely(!ctx))
return 0;
-
n = ctx->major;
+
switch (audit_classify_syscall(ctx->arch, n)) {
case 0: /* native */
if ((mask & AUDIT_PERM_WRITE) &&
@@ -1204,13 +1204,13 @@ static void audit_log_exit(struct audit_context *context, struct task_struct *ts
(context->return_valid==AUDITSC_SUCCESS)?"yes":"no",
context->return_code);
- mutex_lock(&tty_mutex);
- read_lock(&tasklist_lock);
+ spin_lock_irq(&tsk->sighand->siglock);
if (tsk->signal && tsk->signal->tty && tsk->signal->tty->name)
tty = tsk->signal->tty->name;
else
tty = "(none)";
- read_unlock(&tasklist_lock);
+ spin_unlock_irq(&tsk->sighand->siglock);
+
audit_log_format(ab,
" a0=%lx a1=%lx a2=%lx a3=%lx items=%d"
" ppid=%d pid=%d auid=%u uid=%u gid=%u"
@@ -1230,7 +1230,6 @@ static void audit_log_exit(struct audit_context *context, struct task_struct *ts
context->egid, context->sgid, context->fsgid, tty,
tsk->sessionid);
- mutex_unlock(&tty_mutex);
audit_log_task_info(ab, tsk);
if (context->filterkey) {
Right now there are various drivers that try to use tty->count to know when
they get the final close. Aristeau Rozanski showed while debugging the vt
sysfs race that this isn't entirely safe.
Instead of driver side tricks to work around this introduce a shutdown which
is called when the tty is being destructed. This also means that the shutdown
method is tied into the refcounting.
Use this to rework the console close/sysfs logic.
Remove lots of special case code from the tty core code. The pty code can now
have a shutdown() method that replaces the special case hackery in the tree
free up paths.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 15 ++++++++++---
drivers/char/tty_io.c | 49 ++++++++++++++++++++++++++------------------
drivers/char/vt.c | 34 +++++++++++++++----------------
include/linux/tty.h | 3 ++-
include/linux/tty_driver.h | 6 +++++
5 files changed, 65 insertions(+), 42 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 76b2793..ec09c1c 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -388,7 +388,14 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
return -ENOIOCTLCMD;
}
-static const struct tty_operations pty_unix98_ops = {
+static void pty_shutdown(struct tty_struct *tty)
+{
+ /* We have our own method as we don't use the tty index */
+ kfree(tty->termios);
+ kfree(tty->termios_locked);
+}
+
+static const struct tty_operations ptm_unix98_ops = {
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -397,10 +404,10 @@ static const struct tty_operations pty_unix98_ops = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
- .ioctl = pty_unix98_ioctl
+ .ioctl = pty_unix98_ioctl,
+ .shutdown = pty_shutdown
};
-
static void __init unix98_pty_init(void)
{
ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
@@ -427,7 +434,7 @@ static void __init unix98_pty_init(void)
ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
- tty_set_operations(ptm_driver, &pty_unix98_ops);
+ tty_set_operations(ptm_driver, &ptm_unix98_ops);
pts_driver->owner = THIS_MODULE;
pts_driver->driver_name = "pty_slave";
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 2e96ce0..f91704d 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1482,6 +1482,31 @@ release_mem_out:
goto end_init;
}
+void tty_free_termios(struct tty_struct *tty)
+{
+ struct ktermios *tp;
+ int idx = tty->index;
+ /* Kill this flag and push into drivers for locking etc */
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* FIXME: Locking on ->termios array */
+ tp = tty->termios;
+ tty->driver->termios[idx] = NULL;
+ kfree(tp);
+
+ tp = tty->termios_locked;
+ tty->driver->termios_locked[idx] = NULL;
+ kfree(tp);
+ }
+}
+EXPORT_SYMBOL(tty_free_termios);
+
+void tty_shutdown(struct tty_struct *tty)
+{
+ tty->driver->ttys[tty->index] = NULL;
+ tty_free_termios(tty);
+}
+EXPORT_SYMBOL(tty_shutdown);
+
/**
* release_one_tty - release tty structure memory
* @kref: kref of tty we are obliterating
@@ -1499,27 +1524,11 @@ static void release_one_tty(struct kref *kref)
{
struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
struct tty_driver *driver = tty->driver;
- int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
- struct ktermios *tp;
- int idx = tty->index;
-
- if (!devpts)
- tty->driver->ttys[idx] = NULL;
-
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* FIXME: Locking on ->termios array */
- tp = tty->termios;
- if (!devpts)
- tty->driver->termios[idx] = NULL;
- kfree(tp);
-
- tp = tty->termios_locked;
- if (!devpts)
- tty->driver->termios_locked[idx] = NULL;
- kfree(tp);
- }
-
+ if (tty->ops->shutdown)
+ tty->ops->shutdown(tty);
+ else
+ tty_shutdown(tty);
tty->magic = 0;
/* FIXME: locking on tty->driver->refcount */
tty->driver->refcount--;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index ec94521..37a45db 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2758,6 +2758,12 @@ static int con_open(struct tty_struct *tty, struct file *filp)
ret = vc_allocate(currcons);
if (ret == 0) {
struct vc_data *vc = vc_cons[currcons].d;
+
+ /* Still being freed */
+ if (vc->vc_tty) {
+ release_console_sem();
+ return -ERESTARTSYS;
+ }
tty->driver_data = vc;
vc->vc_tty = tty;
@@ -2787,25 +2793,18 @@ static int con_open(struct tty_struct *tty, struct file *filp)
*/
static void con_close(struct tty_struct *tty, struct file *filp)
{
- mutex_lock(&tty_mutex);
- acquire_console_sem();
- if (tty && tty->count == 1) {
- struct vc_data *vc = tty->driver_data;
+ /* Nothing to do - we defer to shutdown */
+}
- if (vc)
- vc->vc_tty = NULL;
- tty->driver_data = NULL;
- vcs_remove_sysfs(tty);
- release_console_sem();
- mutex_unlock(&tty_mutex);
- /*
- * tty_mutex is released, but we still hold BKL, so there is
- * still exclusion against init_dev()
- */
- return;
- }
+static void con_shutdown(struct tty_struct *tty)
+{
+ struct vc_data *vc = tty->driver_data;
+ BUG_ON(vc == NULL);
+ acquire_console_sem();
+ vc->vc_tty = NULL;
+ vcs_remove_sysfs(tty);
release_console_sem();
- mutex_unlock(&tty_mutex);
+ tty_shutdown(tty);
}
static int default_italic_color = 2; // green (ASCII)
@@ -2930,6 +2929,7 @@ static const struct tty_operations con_ops = {
.throttle = con_throttle,
.unthrottle = con_unthrottle,
.resize = vt_resize,
+ .shutdown = con_shutdown
};
int __init vty_init(void)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e00393a..6e39c70 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -354,7 +354,8 @@ extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize *ws);
-
+extern void tty_shutdown(struct tty_struct *tty);
+extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
extern int is_ignored(int sig);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index ac6e58e..2322313 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -21,6 +21,11 @@
*
* Required method.
*
+ * void (*shutdown)(struct tty_struct * tty);
+ *
+ * This routine is called when a particular tty device is closed for
+ * the last time freeing up the resources.
+ *
* int (*write)(struct tty_struct * tty,
* const unsigned char *buf, int count);
*
@@ -200,6 +205,7 @@ struct tty_driver;
struct tty_operations {
int (*open)(struct tty_struct * tty, struct file * filp);
void (*close)(struct tty_struct * tty, struct file * filp);
+ void (*shutdown)(struct tty_struct *tty);
int (*write)(struct tty_struct * tty,
const unsigned char *buf, int count);
int (*put_char)(struct tty_struct *tty, unsigned char ch);
Carry on pushing code out of tty_io when it belongs to other drivers. I'm
not 100% happy with some of this and it will be worth revisiting some of the
exports later when the restructuring work is done.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 78 +++++++++++++++++++++
drivers/char/tty_io.c | 169 ++++++++++------------------------------------
drivers/char/tty_ioctl.c | 66 ++++++++++++++++--
drivers/char/vt.c | 30 ++++----
include/linux/tty.h | 6 ++
include/linux/vt_kern.h | 2 -
6 files changed, 195 insertions(+), 156 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index ec09c1c..328e8ac 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -23,6 +23,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/sysctl.h>
+#include <linux/device.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -332,6 +333,8 @@ int pty_limit = NR_UNIX98_PTY_DEFAULT;
static int pty_limit_min = 0;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
+static struct cdev ptmx_cdev;
+
static struct ctl_table pty_table[] = {
{
.ctl_name = PTY_MAX,
@@ -408,6 +411,70 @@ static const struct tty_operations ptm_unix98_ops = {
.shutdown = pty_shutdown
};
+
+/**
+ * ptmx_open - open a unix 98 pty master
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * Allocate a unix98 pty master device from the ptmx driver.
+ *
+ * Locking: tty_mutex protects the init_dev work. tty->count should
+ * protect the rest.
+ * allocated_ptys_lock handles the list of free pty numbers
+ */
+
+static int __ptmx_open(struct inode *inode, struct file *filp)
+{
+ struct tty_struct *tty;
+ int retval;
+ int index;
+
+ nonseekable_open(inode, filp);
+
+ /* find a device that is not in use. */
+ index = devpts_new_index();
+ if (index < 0)
+ return index;
+
+ mutex_lock(&tty_mutex);
+ retval = tty_init_dev(ptm_driver, index, &tty, 1);
+ mutex_unlock(&tty_mutex);
+
+ if (retval)
+ goto out;
+
+ set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
+ filp->private_data = tty;
+ file_move(filp, &tty->tty_files);
+
+ retval = devpts_pty_new(tty->link);
+ if (retval)
+ goto out1;
+
+ retval = ptm_driver->ops->open(tty, filp);
+ if (!retval)
+ return 0;
+out1:
+ tty_release_dev(filp);
+ return retval;
+out:
+ devpts_kill_index(index);
+ return retval;
+}
+
+static int ptmx_open(struct inode *inode, struct file *filp)
+{
+ int ret;
+
+ lock_kernel();
+ ret = __ptmx_open(inode, filp);
+ unlock_kernel();
+ return ret;
+}
+
+static struct file_operations ptmx_fops;
+
static void __init unix98_pty_init(void)
{
ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
@@ -459,7 +526,18 @@ static void __init unix98_pty_init(void)
pty_table[1].data = &ptm_driver->refcount;
register_sysctl_table(pty_root_table);
+
+ /* Now create the /dev/ptmx special device */
+ tty_default_fops(&ptmx_fops);
+ ptmx_fops.open = ptmx_open;
+
+ cdev_init(&ptmx_cdev, &ptmx_fops);
+ if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
+ register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
+ panic("Couldn't register /dev/ptmx driver\n");
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
}
+
#else
static inline void unix98_pty_init(void) { }
#endif
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f91704d..fdcc43c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -49,7 +49,7 @@
* implement CONFIG_VT and generalize console device interface.
* -- Marko Kohtala <[email protected]>, March 97
*
- * Rewrote init_dev and release_dev to eliminate races.
+ * Rewrote tty_init_dev and tty_release_dev to eliminate races.
* -- Bill Hawes <[email protected]>, June 97
*
* Added devfs support.
@@ -136,11 +136,6 @@ LIST_HEAD(tty_drivers); /* linked list of tty drivers */
DEFINE_MUTEX(tty_mutex);
EXPORT_SYMBOL(tty_mutex);
-#ifdef CONFIG_UNIX98_PTYS
-extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
-static int ptmx_open(struct inode *, struct file *);
-#endif
-
static void initialize_tty_struct(struct tty_struct *tty);
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
@@ -425,20 +420,6 @@ static const struct file_operations tty_fops = {
.fasync = tty_fasync,
};
-#ifdef CONFIG_UNIX98_PTYS
-static const struct file_operations ptmx_fops = {
- .llseek = no_llseek,
- .read = tty_read,
- .write = tty_write,
- .poll = tty_poll,
- .unlocked_ioctl = tty_ioctl,
- .compat_ioctl = tty_compat_ioctl,
- .open = ptmx_open,
- .release = tty_release,
- .fasync = tty_fasync,
-};
-#endif
-
static const struct file_operations console_fops = {
.llseek = no_llseek,
.read = tty_read,
@@ -1224,7 +1205,7 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
}
/**
- * init_dev - initialise a tty device
+ * tty_init_dev - initialise a tty device
* @driver: tty driver we are opening a device on
* @idx: device index
* @ret_tty: returned tty structure
@@ -1248,7 +1229,7 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
* relaxed for the (most common) case of reopening a tty.
*/
-static int init_dev(struct tty_driver *driver, int idx,
+int tty_init_dev(struct tty_driver *driver, int idx,
struct tty_struct **ret_tty, int first_ok)
{
struct tty_struct *tty, *o_tty;
@@ -1269,8 +1250,8 @@ static int init_dev(struct tty_driver *driver, int idx,
goto end_init;
}
/*
- * It's safe from now on because init_dev() is called with
- * tty_mutex held and release_dev() won't change tty->count
+ * It's safe from now on because tty_init_dev() is called with
+ * tty_mutex held and tty_release_dev() won't change tty->count
* or tty->flags without having to grab tty_mutex
*/
if (tty && driver->subtype == PTY_TYPE_MASTER)
@@ -1449,7 +1430,7 @@ fast_track:
/* FIXME */
if (!test_bit(TTY_LDISC, &tty->flags))
- printk(KERN_ERR "init_dev but no ldisc\n");
+ printk(KERN_ERR "tty_init_dev but no ldisc\n");
success:
*ret_tty = tty;
@@ -1476,7 +1457,7 @@ fail_no_mem:
/* call the tty release_tty routine to clean out this slot */
release_mem_out:
if (printk_ratelimit())
- printk(KERN_INFO "init_dev: ldisc open failed, "
+ printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
goto end_init;
@@ -1587,7 +1568,7 @@ static void release_tty(struct tty_struct *tty, int idx)
* WSH 09/09/97: rewritten to avoid some nasty race conditions that could
* lead to double frees or releasing memory still in use.
*/
-static void release_dev(struct file *filp)
+void tty_release_dev(struct file *filp)
{
struct tty_struct *tty, *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
@@ -1597,10 +1578,10 @@ static void release_dev(struct file *filp)
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode,
- "release_dev"))
+ "tty_release_dev"))
return;
- check_tty_count(tty, "release_dev");
+ check_tty_count(tty, "tty_release_dev");
tty_fasync(-1, filp, 0);
@@ -1612,24 +1593,24 @@ static void release_dev(struct file *filp)
#ifdef TTY_PARANOIA_CHECK
if (idx < 0 || idx >= tty->driver->num) {
- printk(KERN_DEBUG "release_dev: bad idx when trying to "
+ printk(KERN_DEBUG "tty_release_dev: bad idx when trying to "
"free (%s)\n", tty->name);
return;
}
if (!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (tty != tty->driver->ttys[idx]) {
- printk(KERN_DEBUG "release_dev: driver.table[%d] not tty "
+ printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, tty->name);
return;
}
if (tty->termios != tty->driver->termios[idx]) {
- printk(KERN_DEBUG "release_dev: driver.termios[%d] not termios "
+ printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios "
"for (%s)\n",
idx, tty->name);
return;
}
if (tty->termios_locked != tty->driver->termios_locked[idx]) {
- printk(KERN_DEBUG "release_dev: driver.termios_locked[%d] not "
+ printk(KERN_DEBUG "tty_release_dev: driver.termios_locked[%d] not "
"termios_locked for (%s)\n",
idx, tty->name);
return;
@@ -1638,7 +1619,7 @@ static void release_dev(struct file *filp)
#endif
#ifdef TTY_DEBUG_HANGUP
- printk(KERN_DEBUG "release_dev of %s (tty count=%d)...",
+ printk(KERN_DEBUG "tty_release_dev of %s (tty count=%d)...",
tty_name(tty, buf), tty->count);
#endif
@@ -1646,26 +1627,26 @@ static void release_dev(struct file *filp)
if (tty->driver->other &&
!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (o_tty != tty->driver->other->ttys[idx]) {
- printk(KERN_DEBUG "release_dev: other->table[%d] "
+ printk(KERN_DEBUG "tty_release_dev: other->table[%d] "
"not o_tty for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->termios != tty->driver->other->termios[idx]) {
- printk(KERN_DEBUG "release_dev: other->termios[%d] "
+ printk(KERN_DEBUG "tty_release_dev: other->termios[%d] "
"not o_termios for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->termios_locked !=
tty->driver->other->termios_locked[idx]) {
- printk(KERN_DEBUG "release_dev: other->termios_locked["
+ printk(KERN_DEBUG "tty_release_dev: other->termios_locked["
"%d] not o_termios_locked for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->link != tty) {
- printk(KERN_DEBUG "release_dev: bad pty pointers\n");
+ printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
return;
}
}
@@ -1723,7 +1704,7 @@ static void release_dev(struct file *filp)
if (!do_sleep)
break;
- printk(KERN_WARNING "release_dev: %s: read/write wait queue "
+ printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
mutex_unlock(&tty_mutex);
schedule();
@@ -1736,14 +1717,14 @@ static void release_dev(struct file *filp)
*/
if (pty_master) {
if (--o_tty->count < 0) {
- printk(KERN_WARNING "release_dev: bad pty slave count "
+ printk(KERN_WARNING "tty_release_dev: bad pty slave count "
"(%d) for %s\n",
o_tty->count, tty_name(o_tty, buf));
o_tty->count = 0;
}
}
if (--tty->count < 0) {
- printk(KERN_WARNING "release_dev: bad tty->count (%d) for %s\n",
+ printk(KERN_WARNING "tty_release_dev: bad tty->count (%d) for %s\n",
tty->count, tty_name(tty, buf));
tty->count = 0;
}
@@ -1825,7 +1806,7 @@ static void release_dev(struct file *filp)
* The termios state of a pty is reset on first open so that
* settings don't persist across reuse.
*
- * Locking: tty_mutex protects tty, get_tty_driver and init_dev work.
+ * Locking: tty_mutex protects tty, get_tty_driver and tty_init_dev work.
* tty->count should protect the rest.
* ->siglock protects ->signal/->sighand
*/
@@ -1889,7 +1870,7 @@ retry_open:
return -ENODEV;
}
got_driver:
- retval = init_dev(driver, index, &tty, 0);
+ retval = tty_init_dev(driver, index, &tty, 0);
mutex_unlock(&tty_mutex);
if (retval)
return retval;
@@ -1920,7 +1901,7 @@ got_driver:
printk(KERN_DEBUG "error %d in opening %s...", retval,
tty->name);
#endif
- release_dev(filp);
+ tty_release_dev(filp);
if (retval != -ERESTARTSYS)
return retval;
if (signal_pending(current))
@@ -1959,69 +1940,6 @@ static int tty_open(struct inode *inode, struct file *filp)
-#ifdef CONFIG_UNIX98_PTYS
-/**
- * ptmx_open - open a unix 98 pty master
- * @inode: inode of device file
- * @filp: file pointer to tty
- *
- * Allocate a unix98 pty master device from the ptmx driver.
- *
- * Locking: tty_mutex protects theinit_dev work. tty->count should
- * protect the rest.
- * allocated_ptys_lock handles the list of free pty numbers
- */
-
-static int __ptmx_open(struct inode *inode, struct file *filp)
-{
- struct tty_struct *tty;
- int retval;
- int index;
-
- nonseekable_open(inode, filp);
-
- /* find a device that is not in use. */
- index = devpts_new_index();
- if (index < 0)
- return index;
-
- mutex_lock(&tty_mutex);
- retval = init_dev(ptm_driver, index, &tty, 1);
- mutex_unlock(&tty_mutex);
-
- if (retval)
- goto out;
-
- set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
- filp->private_data = tty;
- file_move(filp, &tty->tty_files);
-
- retval = devpts_pty_new(tty->link);
- if (retval)
- goto out1;
-
- check_tty_count(tty, "ptmx_open");
- retval = ptm_driver->ops->open(tty, filp);
- if (!retval)
- return 0;
-out1:
- release_dev(filp);
- return retval;
-out:
- devpts_kill_index(index);
- return retval;
-}
-
-static int ptmx_open(struct inode *inode, struct file *filp)
-{
- int ret;
-
- lock_kernel();
- ret = __ptmx_open(inode, filp);
- unlock_kernel();
- return ret;
-}
-#endif
/**
* tty_release - vfs callback for close
@@ -2032,13 +1950,13 @@ static int ptmx_open(struct inode *inode, struct file *filp)
* this tty. There may however be several such references.
*
* Locking:
- * Takes bkl. See release_dev
+ * Takes bkl. See tty_release_dev
*/
static int tty_release(struct inode *inode, struct file *filp)
{
lock_kernel();
- release_dev(filp);
+ tty_release_dev(filp);
unlock_kernel();
return 0;
}
@@ -2932,7 +2850,7 @@ int tty_put_char(struct tty_struct *tty, unsigned char ch)
EXPORT_SYMBOL_GPL(tty_put_char);
-static struct class *tty_class;
+struct class *tty_class;
/**
* tty_register_device - register a tty device
@@ -3197,6 +3115,11 @@ struct tty_struct *get_current_tty(void)
}
EXPORT_SYMBOL_GPL(get_current_tty);
+void tty_default_fops(struct file_operations *fops)
+{
+ *fops = tty_fops;
+}
+
/*
* Initialize the console device. This is called *early*, so
* we can't necessarily depend on lots of kernel help here.
@@ -3234,12 +3157,6 @@ postcore_initcall(tty_class_init);
/* 3/2004 jmc: why do these devices exist? */
static struct cdev tty_cdev, console_cdev;
-#ifdef CONFIG_UNIX98_PTYS
-static struct cdev ptmx_cdev;
-#endif
-#ifdef CONFIG_VT
-static struct cdev vc0_cdev;
-#endif
/*
* Ok, now we can initialize the rest of the tty devices and can count
@@ -3251,32 +3168,18 @@ static int __init tty_init(void)
if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
"tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
"console");
-#ifdef CONFIG_UNIX98_PTYS
- cdev_init(&ptmx_cdev, &ptmx_fops);
- if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
- register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
- panic("Couldn't register /dev/ptmx driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
-#endif
-
#ifdef CONFIG_VT
- cdev_init(&vc0_cdev, &console_fops);
- if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
- register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
- panic("Couldn't register /dev/tty0 driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
-
- vty_init();
+ vty_init(&console_fops);
#endif
return 0;
}
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 3067085..14cc19c 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -40,6 +40,15 @@
#define TERMIOS_OLD 8
+/**
+ * tty_chars_in_buffer - characters pending
+ * @tty: terminal
+ *
+ * Return the number of bytes of data in the device private
+ * output queue. If no private method is supplied there is assumed
+ * to be no queue on the device.
+ */
+
int tty_chars_in_buffer(struct tty_struct *tty)
{
if (tty->ops->chars_in_buffer)
@@ -47,26 +56,49 @@ int tty_chars_in_buffer(struct tty_struct *tty)
else
return 0;
}
-
EXPORT_SYMBOL(tty_chars_in_buffer);
+/**
+ * tty_write_room - write queue space
+ * @tty: terminal
+ *
+ * Return the number of bytes that can be queued to this device
+ * at the present time. The result should be treated as a guarantee
+ * and the driver cannot offer a value it later shrinks by more than
+ * the number of bytes written. If no method is provided 2K is always
+ * returned and data may be lost as there will be no flow control.
+ */
+
int tty_write_room(struct tty_struct *tty)
{
if (tty->ops->write_room)
return tty->ops->write_room(tty);
return 2048;
}
-
EXPORT_SYMBOL(tty_write_room);
+/**
+ * tty_driver_flush_buffer - discard internal buffer
+ * @tty: terminal
+ *
+ * Discard the internal output buffer for this device. If no method
+ * is provided then either the buffer cannot be hardware flushed or
+ * there is no buffer driver side.
+ */
void tty_driver_flush_buffer(struct tty_struct *tty)
{
if (tty->ops->flush_buffer)
tty->ops->flush_buffer(tty);
}
-
EXPORT_SYMBOL(tty_driver_flush_buffer);
+/**
+ * tty_throttle - flow control
+ * @tty: terminal
+ *
+ * Indicate that a tty should stop transmitting data down the stack.
+ */
+
void tty_throttle(struct tty_struct *tty)
{
/* check TTY_THROTTLED first so it indicates our state */
@@ -76,6 +108,13 @@ void tty_throttle(struct tty_struct *tty)
}
EXPORT_SYMBOL(tty_throttle);
+/**
+ * tty_unthrottle - flow control
+ * @tty: terminal
+ *
+ * Indicate that a tty may continue transmitting data down the stack.
+ */
+
void tty_unthrottle(struct tty_struct *tty)
{
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
@@ -112,6 +151,11 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout)
}
EXPORT_SYMBOL(tty_wait_until_sent);
+
+/*
+ * Termios Helper Methods
+ */
+
static void unset_locked_termios(struct ktermios *termios,
struct ktermios *old,
struct ktermios *locked)
@@ -346,6 +390,16 @@ void tty_termios_encode_baud_rate(struct ktermios *termios,
}
EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
+/**
+ * tty_encode_baud_rate - set baud rate of the tty
+ * @ibaud: input baud rate
+ * @obad: output baud rate
+ *
+ * Update the current termios data for the tty with the new speed
+ * settings. The caller must hold the termios_mutex for the tty in
+ * question.
+ */
+
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
{
tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
@@ -430,7 +484,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
* is a bit of layering violation here with n_tty in terms of the
* internal knowledge of this function.
*
- * Locking: termios_sem
+ * Locking: termios_mutex
*/
static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
@@ -508,7 +562,7 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
* functions before using change_termios to do the actual changes.
*
* Locking:
- * Called functions take ldisc and termios_sem locks
+ * Called functions take ldisc and termios_mutex locks
*/
static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
@@ -715,7 +769,7 @@ static void set_sgflags(struct ktermios *termios, int flags)
* Updates a terminal from the legacy BSD style terminal information
* structure.
*
- * Locking: termios_sem
+ * Locking: termios_mutex
*/
static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 37a45db..57029fe 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -100,10 +100,10 @@
#include <linux/font.h>
#include <linux/bitops.h>
#include <linux/notifier.h>
-
-#include <asm/io.h>
+#include <linux/device.h>
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#define MAX_NR_CON_DRIVER 16
@@ -2352,8 +2352,6 @@ rescan_last_byte:
FLUSH
console_conditional_schedule();
release_console_sem();
-
-out:
notify_update(vc);
return n;
#undef FLUSH
@@ -2784,13 +2782,6 @@ static int con_open(struct tty_struct *tty, struct file *filp)
return ret;
}
-/*
- * We take tty_mutex in here to prevent another thread from coming in via init_dev
- * and taking a ref against the tty while we're in the process of forgetting
- * about it and cleaning things up.
- *
- * This is because vcs_remove_sysfs() can sleep and will drop the BKL.
- */
static void con_close(struct tty_struct *tty, struct file *filp)
{
/* Nothing to do - we defer to shutdown */
@@ -2932,8 +2923,16 @@ static const struct tty_operations con_ops = {
.shutdown = con_shutdown
};
-int __init vty_init(void)
+static struct cdev vc0_cdev;
+
+int __init vty_init(const struct file_operations *console_fops)
{
+ cdev_init(&vc0_cdev, console_fops);
+ if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
+ register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
+ panic("Couldn't register /dev/tty0 driver\n");
+ device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+
vcs_init();
console_driver = alloc_tty_driver(MAX_NR_CONSOLES);
@@ -2952,7 +2951,6 @@ int __init vty_init(void)
tty_set_operations(console_driver, &con_ops);
if (tty_register_driver(console_driver))
panic("Couldn't register console driver\n");
-
kbd_init();
console_map_init();
#ifdef CONFIG_PROM_CONSOLE
@@ -3446,7 +3444,7 @@ int register_con_driver(const struct consw *csw, int first, int last)
if (retval)
goto err;
- con_driver->dev = device_create_drvdata(vtconsole_class, NULL,
+ con_driver->dev = device_create(vtconsole_class, NULL,
MKDEV(0, con_driver->node),
NULL, "vtcon%i",
con_driver->node);
@@ -3557,7 +3555,7 @@ static int __init vtconsole_class_init(void)
struct con_driver *con = ®istered_con_driver[i];
if (con->con && !con->dev) {
- con->dev = device_create_drvdata(vtconsole_class, NULL,
+ con->dev = device_create(vtconsole_class, NULL,
MKDEV(0, con->node),
NULL, "vtcon%i",
con->node);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6e39c70..6cc7ccc 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -314,6 +314,8 @@ extern int kmsg_redirect;
extern void console_init(void);
extern int vcs_init(void);
+extern struct class *tty_class;
+
/**
* tty_kref_get - get a tty reference
* @tty: tty device
@@ -398,6 +400,10 @@ extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
+extern void tty_default_fops(struct file_operations *fops);
+extern int tty_init_dev(struct tty_driver *driver, int idx,
+ struct tty_struct **ret_tty, int first_ok);
+extern void tty_release_dev(struct file *filp);
extern struct mutex tty_mutex;
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 1cbd0a7..2f11134 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -96,7 +96,7 @@ void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
extern int unbind_con_driver(const struct consw *csw, int first, int last,
int deflt);
-int vty_init(void);
+int vty_init(const struct file_operations *console_fops);
/*
* vc_screen.c shares this temporary buffer with the console write code so that
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/ip2/ip2main.c | 6 +-
drivers/char/pty.c | 5 ++
drivers/char/tty_io.c | 110 ++++++++++++++++++++++++--------------------
drivers/net/wan/Kconfig | 2 -
include/linux/tty_driver.h | 15 ++++--
5 files changed, 80 insertions(+), 58 deletions(-)
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 66f52a2..6774572 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -264,8 +264,8 @@ static int tracewrap;
/**********/
#if defined(MODULE) && defined(IP2DEBUG_OPEN)
-#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \
- tty->name,(pCh->flags),ip2_tty_driver->refcount, \
+#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
+ tty->name,(pCh->flags), \
tty->count,/*GET_USE_COUNT(module)*/0,s)
#else
#define DBG_CNT(s)
@@ -2893,7 +2893,7 @@ ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg )
case 13:
switch ( cmd ) {
case 64: /* Driver - ip2stat */
- rc = put_user(ip2_tty_driver->refcount, pIndex++ );
+ rc = put_user(-1, pIndex++ );
rc = put_user(irq_counter, pIndex++ );
rc = put_user(bh_counter, pIndex++ );
break;
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 6e148ad..0fdfa05 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -571,8 +571,11 @@ static void __init unix98_pty_init(void)
if (tty_register_driver(pts_driver))
panic("Couldn't register Unix98 pts driver");
+ /* FIXME: WTF */
+#if 0
pty_table[1].data = &ptm_driver->refcount;
- register_sysctl_table(pty_root_table);
+#endif
+ register_sysctl_table(pty_root_table);
/* Now create the /dev/ptmx special device */
tty_default_fops(&ptmx_fops);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index ac41af8..47aa437 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -276,7 +276,7 @@ static struct tty_driver *get_tty_driver(dev_t device, int *index)
if (device < base || device >= base + p->num)
continue;
*index = device - base;
- return p;
+ return tty_driver_kref_get(p);
}
return NULL;
}
@@ -320,7 +320,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
if (tty_line >= 0 && tty_line <= p->num && p->ops &&
p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
- res = p;
+ res = tty_driver_kref_get(p);
*line = tty_line;
break;
}
@@ -1410,7 +1410,7 @@ int tty_init_dev(struct tty_driver *driver, int idx,
*o_ltp_loc = o_ltp;
o_tty->termios = *o_tp_loc;
o_tty->termios_locked = *o_ltp_loc;
- driver->other->refcount++;
+ tty_driver_kref_get(driver->other);
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
@@ -1438,7 +1438,7 @@ int tty_init_dev(struct tty_driver *driver, int idx,
/* Compatibility until drivers always set this */
tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
- driver->refcount++;
+ tty_driver_kref_get(driver);
tty->count++;
/*
@@ -1530,8 +1530,7 @@ static void release_one_tty(struct kref *kref)
else
tty_shutdown(tty);
tty->magic = 0;
- /* FIXME: locking on tty->driver->refcount */
- tty->driver->refcount--;
+ tty_driver_kref_put(driver);
module_put(driver->owner);
file_list_lock();
@@ -1854,7 +1853,7 @@ retry_open:
mutex_unlock(&tty_mutex);
return -ENXIO;
}
- driver = tty->driver;
+ driver = tty_driver_kref_get(tty->driver);
index = tty->index;
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
/* noctty = 1; */
@@ -1865,14 +1864,14 @@ retry_open:
#ifdef CONFIG_VT
if (device == MKDEV(TTY_MAJOR, 0)) {
extern struct tty_driver *console_driver;
- driver = console_driver;
+ driver = tty_driver_kref_get(console_driver);
index = fg_console;
noctty = 1;
goto got_driver;
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = console_device(&index);
+ driver = tty_driver_kref_get(console_device(&index));
if (driver) {
/* Don't let /dev/console block */
filp->f_flags |= O_NONBLOCK;
@@ -1891,6 +1890,7 @@ retry_open:
got_driver:
retval = tty_init_dev(driver, index, &tty, 0);
mutex_unlock(&tty_mutex);
+ tty_driver_kref_put(driver);
if (retval)
return retval;
@@ -2866,7 +2866,6 @@ int tty_put_char(struct tty_struct *tty, unsigned char ch)
return tty->ops->put_char(tty, ch);
return tty->ops->write(tty, &ch, 1);
}
-
EXPORT_SYMBOL_GPL(tty_put_char);
struct class *tty_class;
@@ -2909,6 +2908,7 @@ struct device *tty_register_device(struct tty_driver *driver, unsigned index,
return device_create_drvdata(tty_class, device, dev, NULL, name);
}
+EXPORT_SYMBOL(tty_register_device);
/**
* tty_unregister_device - unregister a tty device
@@ -2926,8 +2926,6 @@ void tty_unregister_device(struct tty_driver *driver, unsigned index)
device_destroy(tty_class,
MKDEV(driver->major, driver->minor_start) + index);
}
-
-EXPORT_SYMBOL(tty_register_device);
EXPORT_SYMBOL(tty_unregister_device);
struct tty_driver *alloc_tty_driver(int lines)
@@ -2936,27 +2934,70 @@ struct tty_driver *alloc_tty_driver(int lines)
driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
if (driver) {
+ kref_init(&driver->kref);
driver->magic = TTY_DRIVER_MAGIC;
driver->num = lines;
/* later we'll move allocation of tables here */
}
return driver;
}
+EXPORT_SYMBOL(alloc_tty_driver);
-void put_tty_driver(struct tty_driver *driver)
+static void destruct_tty_driver(struct kref *kref)
{
+ struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
+ int i;
+ struct ktermios *tp;
+ void *p;
+
+ if (driver->flags & TTY_DRIVER_INSTALLED) {
+ /*
+ * Free the termios and termios_locked structures because
+ * we don't want to get memory leaks when modular tty
+ * drivers are removed from the kernel.
+ */
+ for (i = 0; i < driver->num; i++) {
+ tp = driver->termios[i];
+ if (tp) {
+ driver->termios[i] = NULL;
+ kfree(tp);
+ }
+ tp = driver->termios_locked[i];
+ if (tp) {
+ driver->termios_locked[i] = NULL;
+ kfree(tp);
+ }
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
+ tty_unregister_device(driver, i);
+ }
+ p = driver->ttys;
+ proc_tty_unregister_driver(driver);
+ driver->ttys = NULL;
+ driver->termios = driver->termios_locked = NULL;
+ kfree(p);
+ cdev_del(&driver->cdev);
+ }
kfree(driver);
}
+void tty_driver_kref_put(struct tty_driver *driver)
+{
+ kref_put(&driver->kref, destruct_tty_driver);
+}
+EXPORT_SYMBOL(tty_driver_kref_put);
+
void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op)
{
driver->ops = op;
};
+EXPORT_SYMBOL(tty_set_operations);
-EXPORT_SYMBOL(alloc_tty_driver);
+void put_tty_driver(struct tty_driver *d)
+{
+ tty_driver_kref_put(d);
+}
EXPORT_SYMBOL(put_tty_driver);
-EXPORT_SYMBOL(tty_set_operations);
/*
* Called by a tty driver to register itself.
@@ -2968,9 +3009,6 @@ int tty_register_driver(struct tty_driver *driver)
dev_t dev;
void **p = NULL;
- if (driver->flags & TTY_DRIVER_INSTALLED)
- return 0;
-
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
p = kzalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
if (!p)
@@ -3024,6 +3062,7 @@ int tty_register_driver(struct tty_driver *driver)
tty_register_device(driver, i, NULL);
}
proc_tty_register_driver(driver);
+ driver->flags |= TTY_DRIVER_INSTALLED;
return 0;
}
@@ -3034,46 +3073,19 @@ EXPORT_SYMBOL(tty_register_driver);
*/
int tty_unregister_driver(struct tty_driver *driver)
{
- int i;
- struct ktermios *tp;
- void *p;
-
+#if 0
+ /* FIXME */
if (driver->refcount)
return -EBUSY;
-
+#endif
unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
driver->num);
mutex_lock(&tty_mutex);
list_del(&driver->tty_drivers);
mutex_unlock(&tty_mutex);
-
- /*
- * Free the termios and termios_locked structures because
- * we don't want to get memory leaks when modular tty
- * drivers are removed from the kernel.
- */
- for (i = 0; i < driver->num; i++) {
- tp = driver->termios[i];
- if (tp) {
- driver->termios[i] = NULL;
- kfree(tp);
- }
- tp = driver->termios_locked[i];
- if (tp) {
- driver->termios_locked[i] = NULL;
- kfree(tp);
- }
- if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
- tty_unregister_device(driver, i);
- }
- p = driver->ttys;
- proc_tty_unregister_driver(driver);
- driver->ttys = NULL;
- driver->termios = driver->termios_locked = NULL;
- kfree(p);
- cdev_del(&driver->cdev);
return 0;
}
+
EXPORT_SYMBOL(tty_unregister_driver);
dev_t tty_devnum(struct tty_struct *tty)
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 2ae2ec4..21efd99 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -205,7 +205,7 @@ config WANXL_BUILD_FIRMWARE
config PC300
tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
- depends on HDLC && PCI
+ depends on HDLC && PCI && BROKEN
---help---
Driver for the Cyclades-PC300 synchronous communication boards.
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 2c5c35c..ba891dd 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -253,6 +253,7 @@ struct tty_operations {
struct tty_driver {
int magic; /* magic number for this structure */
+ struct kref kref; /* Reference management */
struct cdev cdev;
struct module *owner;
const char *driver_name;
@@ -266,7 +267,6 @@ struct tty_driver {
short subtype; /* subtype of tty driver */
struct ktermios init_termios; /* Initial termios */
int flags; /* tty driver flags */
- int refcount; /* for loadable tty drivers */
struct proc_dir_entry *proc_entry; /* /proc fs entry */
struct tty_driver *other; /* only used for the PTY driver */
@@ -288,12 +288,19 @@ struct tty_driver {
extern struct list_head tty_drivers;
-struct tty_driver *alloc_tty_driver(int lines);
-void put_tty_driver(struct tty_driver *driver);
-void tty_set_operations(struct tty_driver *driver,
+extern struct tty_driver *alloc_tty_driver(int lines);
+extern void put_tty_driver(struct tty_driver *driver);
+extern void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op);
extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
+extern void tty_driver_kref_put(struct tty_driver *driver);
+extern inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
+{
+ kref_get(&d->kref);
+ return d;
+}
+
/* tty driver magic number */
#define TTY_DRIVER_MAGIC 0x5402
Fix up the naming, style and extract some bits of code into the driver
specific code
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 49 +++++++++++++++++++++++++++++++++-
drivers/char/tty_io.c | 64 +++++++++++++++++---------------------------
include/linux/tty_driver.h | 9 ++++++
3 files changed, 81 insertions(+), 41 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 328e8ac..6e148ad 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -391,6 +391,41 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
return -ENOIOCTLCMD;
}
+/**
+ * ptm_unix98_lookup - find a pty master
+ * @driver: ptm driver
+ * @idx: tty index
+ *
+ * Look up a pty master device. Called under the tty_mutex for now.
+ * This provides our locking.
+ */
+
+static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, int idx)
+{
+ struct tty_struct *tty = devpts_get_tty(idx);
+ if (tty)
+ tty = tty->link;
+ return tty;
+}
+
+/**
+ * pts_unix98_lookup - find a pty slave
+ * @driver: pts driver
+ * @idx: tty index
+ *
+ * Look up a pty master device. Called under the tty_mutex for now.
+ * This provides our locking.
+ */
+
+static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, int idx)
+{
+ struct tty_struct *tty = devpts_get_tty(idx);
+ /* Master must be open before slave */
+ if (!tty)
+ return ERR_PTR(-EIO);
+ return tty;
+}
+
static void pty_shutdown(struct tty_struct *tty)
{
/* We have our own method as we don't use the tty index */
@@ -399,6 +434,7 @@ static void pty_shutdown(struct tty_struct *tty)
}
static const struct tty_operations ptm_unix98_ops = {
+ .lookup = ptm_unix98_lookup,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -411,6 +447,17 @@ static const struct tty_operations ptm_unix98_ops = {
.shutdown = pty_shutdown
};
+static const struct tty_operations pty_unix98_ops = {
+ .lookup = pts_unix98_lookup,
+ .open = pty_open,
+ .close = pty_close,
+ .write = pty_write,
+ .write_room = pty_write_room,
+ .flush_buffer = pty_flush_buffer,
+ .chars_in_buffer = pty_chars_in_buffer,
+ .unthrottle = pty_unthrottle,
+ .set_termios = pty_set_termios,
+};
/**
* ptmx_open - open a unix 98 pty master
@@ -517,7 +564,7 @@ static void __init unix98_pty_init(void)
pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
- tty_set_operations(pts_driver, &pty_ops);
+ tty_set_operations(pts_driver, &pty_unix98_ops);
if (tty_register_driver(ptm_driver))
panic("Couldn't register Unix98 ptm driver");
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index a540849..ac41af8 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1204,53 +1204,38 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
-/*
- * find_tty() - find an existing tty, if any
- * @driver: the driver for the tty
- * @idx: the minor number
+/**
+ * tty_driver_lookup_tty() - find an existing tty, if any
+ * @driver: the driver for the tty
+ * @idx: the minor number
*
- * Return the tty, if found or ERR_PTR() otherwise.
+ * Return the tty, if found or ERR_PTR() otherwise.
*
- * Locking: tty_mutex must be held. If tty is found, the mutex must
- * be held until the 'fast-open' is also done.
+ * Locking: tty_mutex must be held. If tty is found, the mutex must
+ * be held until the 'fast-open' is also done. Will change once we
+ * have refcounting in the driver and per driver locking
*/
-struct tty_struct *find_tty(struct tty_driver *driver, int idx)
+struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, int idx)
{
struct tty_struct *tty;
- /* check whether we're reopening an existing tty */
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- tty = devpts_get_tty(idx);
- /*
- * If we don't have a tty here on a slave open, it's because
- * the master already started the close process and there's
- * no relation between devpts file and tty anymore.
- */
- if (!tty && driver->subtype == PTY_TYPE_SLAVE)
- return ERR_PTR(-EIO);
+ if (driver->ops->lookup)
+ return driver->ops->lookup(driver, idx);
- /*
- * tty is safe on because we are called with tty_mutex held
- * and release_dev() won't change tty->count or tty->flags
- * without grabbing tty_mutex.
- */
- if (tty && driver->subtype == PTY_TYPE_MASTER)
- tty = tty->link;
- } else
tty = driver->ttys[idx];
return tty;
}
-/*
- * fast_tty_open() - fast re-open of an open tty
- * @tty - the tty to open
+/**
+ * tty_reopen() - fast re-open of an open tty
+ * @tty - the tty to open
*
- * Return 0 on success, -errno on error.
+ * Return 0 on success, -errno on error.
*
- * Locking: tty_mutex must be held from the time the tty was found
- * till this open completes.
+ * Locking: tty_mutex must be held from the time the tty was found
+ * till this open completes.
*/
-static int fast_tty_open(struct tty_struct *tty)
+static int tty_reopen(struct tty_struct *tty)
{
struct tty_driver *driver = tty->driver;
@@ -1271,9 +1256,7 @@ static int fast_tty_open(struct tty_struct *tty)
tty->count++;
tty->driver = driver; /* N.B. why do this every time?? */
- /* FIXME */
- if (!test_bit(TTY_LDISC, &tty->flags))
- printk(KERN_ERR "fast_tty_open: no ldisc\n");
+ WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
return 0;
}
@@ -1312,14 +1295,14 @@ int tty_init_dev(struct tty_driver *driver, int idx,
int retval = 0;
/* check whether we're reopening an existing tty */
- tty = find_tty(driver, idx);
+ tty = tty_driver_lookup_tty(driver, idx);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
goto end_init;
}
if (tty) {
- retval = fast_tty_open(tty);
+ retval = tty_reopen(tty);
if (retval)
return retval;
*ret_tty = tty;
@@ -1440,6 +1423,8 @@ int tty_init_dev(struct tty_driver *driver, int idx,
* All structures have been allocated, so now we install them.
* Failures after this point use release_tty to clean up, so
* there's no need to null out the local pointers.
+ *
+ * FIXME: We want a 'driver->install method ?
*/
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM))
driver->ttys[idx] = tty;
@@ -1466,9 +1451,8 @@ int tty_init_dev(struct tty_driver *driver, int idx,
if (retval)
goto release_mem_out;
-success:
- *ret_tty = tty;
+ *ret_tty = tty;
/* All paths come through here to release the mutex */
end_init:
return retval;
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 2322313..2c5c35c 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -7,6 +7,14 @@
* defined; unless noted otherwise, they are optional, and can be
* filled in with a null pointer.
*
+ * struct tty_struct * (*lookup)(struct tty_driver *self, int idx)
+ *
+ * Return the tty device corresponding to idx, NULL if there is not
+ * one currently in use and an ERR_PTR value on error. Called under
+ * tty_mutex (for now!)
+ *
+ * Optional method. Default behaviour is to use the ttys array
+ *
* int (*open)(struct tty_struct * tty, struct file * filp);
*
* This routine is called when a particular tty device is opened.
@@ -203,6 +211,7 @@ struct tty_struct;
struct tty_driver;
struct tty_operations {
+ struct tty_struct * (*lookup)(struct tty_driver *driver, int idx);
int (*open)(struct tty_struct * tty, struct file * filp);
void (*close)(struct tty_struct * tty, struct file * filp);
void (*shutdown)(struct tty_struct *tty);
We have the lookup operation abstracted which is nice for pty cleanup but
we really want to abstract the add/remove entries as well so that we can
pull the pty code out of the tty core and create a clear defined interface
for the tty driver table.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 16 ++++++++++++
drivers/char/tty_io.c | 57 ++++++++++++++++++++++++++++++++++++--------
include/linux/tty_driver.h | 16 ++++++++++++
3 files changed, 79 insertions(+), 10 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 0fdfa05..4e6490b 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -433,8 +433,22 @@ static void pty_shutdown(struct tty_struct *tty)
kfree(tty->termios_locked);
}
+/* We have no need to install and remove our tty objects as devpts does all
+ the work for us */
+
+static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ return 0;
+}
+
+static void pty_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+}
+
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
+ .install = pty_install,
+ .remove = pty_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -449,6 +463,8 @@ static const struct tty_operations ptm_unix98_ops = {
static const struct tty_operations pty_unix98_ops = {
.lookup = pts_unix98_lookup,
+ .install = pty_install,
+ .remove = pty_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 47aa437..888380f 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1189,7 +1189,7 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
}
/**
- * pty_line_name - generate name for a tty
+ * tty_line_name - generate name for a tty
* @driver: the tty driver in use
* @index: the minor number
* @p: output buffer of at least 7 bytes
@@ -1222,13 +1222,51 @@ struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, int idx)
if (driver->ops->lookup)
return driver->ops->lookup(driver, idx);
- tty = driver->ttys[idx];
+ tty = driver->ttys[idx];
return tty;
}
/**
- * tty_reopen() - fast re-open of an open tty
- * @tty - the tty to open
+ * tty_driver_install_tty() - install a tty entry in the driver
+ * @driver: the driver for the tty
+ * @tty: the tty
+ *
+ * Install a tty object into the driver tables. The tty->index field
+ * will be set by the time this is called.
+ *
+ * Locking: tty_mutex for now
+ */
+static int tty_driver_install_tty(struct tty_driver *driver,
+ struct tty_struct *tty)
+{
+ if (driver->ops->install)
+ return driver->ops->install(driver, tty);
+ driver->ttys[tty->index] = tty;
+ return 0;
+}
+
+/**
+ * tty_driver_remove_tty() - remove a tty from the driver tables
+ * @driver: the driver for the tty
+ * @idx: the minor number
+ *
+ * Remvoe a tty object from the driver tables. The tty->index field
+ * will be set by the time this is called.
+ *
+ * Locking: tty_mutex for now
+ */
+static void tty_driver_remove_tty(struct tty_driver *driver,
+ struct tty_struct *tty)
+{
+ if (driver->ops->remove)
+ driver->ops->remove(driver, tty);
+ else
+ driver->ttys[tty->index] = NULL;
+}
+
+/*
+ * tty_reopen() - fast re-open of an open tty
+ * @tty - the tty to open
*
* Return 0 on success, -errno on error.
*
@@ -1423,11 +1461,7 @@ int tty_init_dev(struct tty_driver *driver, int idx,
* All structures have been allocated, so now we install them.
* Failures after this point use release_tty to clean up, so
* there's no need to null out the local pointers.
- *
- * FIXME: We want a 'driver->install method ?
*/
- if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM))
- driver->ttys[idx] = tty;
if (!*tp_loc)
*tp_loc = tp;
@@ -1441,6 +1475,9 @@ int tty_init_dev(struct tty_driver *driver, int idx,
tty_driver_kref_get(driver);
tty->count++;
+ if (tty_driver_install_tty(driver, tty) < 0)
+ goto release_mem_out;
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
@@ -1502,7 +1539,7 @@ EXPORT_SYMBOL(tty_free_termios);
void tty_shutdown(struct tty_struct *tty)
{
- tty->driver->ttys[tty->index] = NULL;
+ tty_driver_remove_tty(tty->driver, tty);
tty_free_termios(tty);
}
EXPORT_SYMBOL(tty_shutdown);
@@ -1615,7 +1652,7 @@ void tty_release_dev(struct file *filp)
"free (%s)\n", tty->name);
return;
}
- if (!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
+ if (!devpts) {
if (tty != tty->driver->ttys[idx]) {
printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, tty->name);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index ba891dd..005d06a 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -15,6 +15,20 @@
*
* Optional method. Default behaviour is to use the ttys array
*
+ * int (*install)(struct tty_driver *self, struct tty_struct *tty)
+ *
+ * Install a new tty into the tty driver internal tables. Used in
+ * conjunction with lookup and remove methods.
+ *
+ * Optional method. Default behaviour is to use the ttys array
+ *
+ * void (*remove)(struct tty_driver *self, struct tty_struct *tty)
+ *
+ * Remove a closed tty from the tty driver internal tables. Used in
+ * conjunction with lookup and remove methods.
+ *
+ * Optional method. Default behaviour is to use the ttys array
+ *
* int (*open)(struct tty_struct * tty, struct file * filp);
*
* This routine is called when a particular tty device is opened.
@@ -212,6 +226,8 @@ struct tty_driver;
struct tty_operations {
struct tty_struct * (*lookup)(struct tty_driver *driver, int idx);
+ int (*install)(struct tty_driver *driver, struct tty_struct *tty);
+ void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
int (*open)(struct tty_struct * tty, struct file * filp);
void (*close)(struct tty_struct * tty, struct file * filp);
void (*shutdown)(struct tty_struct *tty);
From: Sukadev Bhattiprolu <[email protected]>
Move the 'find-tty' and 'fast-track-open' parts of init_dev() to
separate functions.
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 139 +++++++++++++++++++++++++++++++------------------
1 files changed, 87 insertions(+), 52 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index fdcc43c..a540849 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1204,6 +1204,80 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
+/*
+ * find_tty() - find an existing tty, if any
+ * @driver: the driver for the tty
+ * @idx: the minor number
+ *
+ * Return the tty, if found or ERR_PTR() otherwise.
+ *
+ * Locking: tty_mutex must be held. If tty is found, the mutex must
+ * be held until the 'fast-open' is also done.
+ */
+struct tty_struct *find_tty(struct tty_driver *driver, int idx)
+{
+ struct tty_struct *tty;
+
+ /* check whether we're reopening an existing tty */
+ if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
+ tty = devpts_get_tty(idx);
+ /*
+ * If we don't have a tty here on a slave open, it's because
+ * the master already started the close process and there's
+ * no relation between devpts file and tty anymore.
+ */
+ if (!tty && driver->subtype == PTY_TYPE_SLAVE)
+ return ERR_PTR(-EIO);
+
+ /*
+ * tty is safe on because we are called with tty_mutex held
+ * and release_dev() won't change tty->count or tty->flags
+ * without grabbing tty_mutex.
+ */
+ if (tty && driver->subtype == PTY_TYPE_MASTER)
+ tty = tty->link;
+ } else
+ tty = driver->ttys[idx];
+ return tty;
+}
+
+/*
+ * fast_tty_open() - fast re-open of an open tty
+ * @tty - the tty to open
+ *
+ * Return 0 on success, -errno on error.
+ *
+ * Locking: tty_mutex must be held from the time the tty was found
+ * till this open completes.
+ */
+static int fast_tty_open(struct tty_struct *tty)
+{
+ struct tty_driver *driver = tty->driver;
+
+ if (test_bit(TTY_CLOSING, &tty->flags))
+ return -EIO;
+
+ if (driver->type == TTY_DRIVER_TYPE_PTY &&
+ driver->subtype == PTY_TYPE_MASTER) {
+ /*
+ * special case for PTY masters: only one open permitted,
+ * and the slave side open count is incremented as well.
+ */
+ if (tty->count)
+ return -EIO;
+
+ tty->link->count++;
+ }
+ tty->count++;
+ tty->driver = driver; /* N.B. why do this every time?? */
+
+ /* FIXME */
+ if (!test_bit(TTY_LDISC, &tty->flags))
+ printk(KERN_ERR "fast_tty_open: no ldisc\n");
+
+ return 0;
+}
+
/**
* tty_init_dev - initialise a tty device
* @driver: tty driver we are opening a device on
@@ -1238,29 +1312,21 @@ int tty_init_dev(struct tty_driver *driver, int idx,
int retval = 0;
/* check whether we're reopening an existing tty */
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- tty = devpts_get_tty(idx);
- /*
- * If we don't have a tty here on a slave open, it's because
- * the master already started the close process and there's
- * no relation between devpts file and tty anymore.
- */
- if (!tty && driver->subtype == PTY_TYPE_SLAVE) {
- retval = -EIO;
- goto end_init;
- }
- /*
- * It's safe from now on because tty_init_dev() is called with
- * tty_mutex held and tty_release_dev() won't change tty->count
- * or tty->flags without having to grab tty_mutex
- */
- if (tty && driver->subtype == PTY_TYPE_MASTER)
- tty = tty->link;
- } else {
- tty = driver->ttys[idx];
+ tty = find_tty(driver, idx);
+ if (IS_ERR(tty)) {
+ retval = PTR_ERR(tty);
+ goto end_init;
+ }
+
+ if (tty) {
+ retval = fast_tty_open(tty);
+ if (retval)
+ return retval;
+ *ret_tty = tty;
+ return 0;
}
- if (tty) goto fast_track;
+ /* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
(driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
retval = -EIO;
@@ -1400,37 +1466,6 @@ int tty_init_dev(struct tty_driver *driver, int idx,
if (retval)
goto release_mem_out;
- goto success;
-
- /*
- * This fast open can be used if the tty is already open.
- * No memory is allocated, and the only failures are from
- * attempting to open a closing tty or attempting multiple
- * opens on a pty master.
- */
-fast_track:
- if (test_bit(TTY_CLOSING, &tty->flags)) {
- retval = -EIO;
- goto end_init;
- }
- if (driver->type == TTY_DRIVER_TYPE_PTY &&
- driver->subtype == PTY_TYPE_MASTER) {
- /*
- * special case for PTY masters: only one open permitted,
- * and the slave side open count is incremented as well.
- */
- if (tty->count) {
- retval = -EIO;
- goto end_init;
- }
- tty->link->count++;
- }
- tty->count++;
- tty->driver = driver; /* N.B. why do this every time?? */
-
- /* FIXME */
- if (!test_bit(TTY_LDISC, &tty->flags))
- printk(KERN_ERR "tty_init_dev but no ldisc\n");
success:
*ret_tty = tty;
Original suggestion and proposal from Sukadev Bhattiprolu.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 6 ++++--
drivers/char/tty_io.c | 52 ++++++++++++++++++++-----------------------------
include/linux/tty.h | 4 ++--
3 files changed, 27 insertions(+), 35 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 4e6490b..c984500 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -501,11 +501,13 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
return index;
mutex_lock(&tty_mutex);
- retval = tty_init_dev(ptm_driver, index, &tty, 1);
+ tty = tty_init_dev(ptm_driver, index, 1);
mutex_unlock(&tty_mutex);
- if (retval)
+ if (IS_ERR(tty)) {
+ retval = PTR_ERR(tty);
goto out;
+ }
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
filp->private_data = tty;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 888380f..b0ad488 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1324,35 +1324,32 @@ static int tty_reopen(struct tty_struct *tty)
* relaxed for the (most common) case of reopening a tty.
*/
-int tty_init_dev(struct tty_driver *driver, int idx,
- struct tty_struct **ret_tty, int first_ok)
+struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
+ int first_ok)
{
struct tty_struct *tty, *o_tty;
struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
- int retval = 0;
+ int retval;
/* check whether we're reopening an existing tty */
tty = tty_driver_lookup_tty(driver, idx);
- if (IS_ERR(tty)) {
- retval = PTR_ERR(tty);
- goto end_init;
- }
+
+ if (IS_ERR(tty))
+ return tty;
if (tty) {
retval = tty_reopen(tty);
if (retval)
- return retval;
- *ret_tty = tty;
- return 0;
+ return ERR_PTR(retval);
+ return tty;
}
/* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
- (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) {
- retval = -EIO;
- goto end_init;
- }
+ (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok)
+ return ERR_PTR(-EIO);
+
/*
* First time open is complex, especially for PTY devices.
* This code guarantees that either everything succeeds and the
@@ -1361,10 +1358,8 @@ int tty_init_dev(struct tty_driver *driver, int idx,
* and locked termios may be retained.)
*/
- if (!try_module_get(driver->owner)) {
- retval = -ENODEV;
- goto end_init;
- }
+ if (!try_module_get(driver->owner))
+ return ERR_PTR(-ENODEV);
o_tty = NULL;
tp = o_tp = NULL;
@@ -1475,7 +1470,8 @@ int tty_init_dev(struct tty_driver *driver, int idx,
tty_driver_kref_get(driver);
tty->count++;
- if (tty_driver_install_tty(driver, tty) < 0)
+ retval = tty_driver_install_tty(driver, tty);
+ if (retval < 0)
goto release_mem_out;
/*
@@ -1485,14 +1481,9 @@ int tty_init_dev(struct tty_driver *driver, int idx,
*/
retval = tty_ldisc_setup(tty, o_tty);
-
if (retval)
goto release_mem_out;
-
- *ret_tty = tty;
- /* All paths come through here to release the mutex */
-end_init:
- return retval;
+ return tty;
/* Release locally allocated memory ... nothing placed in slots */
free_mem_out:
@@ -1507,8 +1498,7 @@ free_mem_out:
fail_no_mem:
module_put(driver->owner);
- retval = -ENOMEM;
- goto end_init;
+ return ERR_PTR(-ENOMEM);
/* call the tty release_tty routine to clean out this slot */
release_mem_out:
@@ -1516,7 +1506,7 @@ release_mem_out:
printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
- goto end_init;
+ return ERR_PTR(retval);
}
void tty_free_termios(struct tty_struct *tty)
@@ -1925,11 +1915,11 @@ retry_open:
return -ENODEV;
}
got_driver:
- retval = tty_init_dev(driver, index, &tty, 0);
+ tty = tty_init_dev(driver, index, 0);
mutex_unlock(&tty_mutex);
tty_driver_kref_put(driver);
- if (retval)
- return retval;
+ if (IS_ERR(tty))
+ return PTR_ERR(tty);
filp->private_data = tty;
file_move(filp, &tty->tty_files);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 6cc7ccc..54523a3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -401,8 +401,8 @@ extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
-extern int tty_init_dev(struct tty_driver *driver, int idx,
- struct tty_struct **ret_tty, int first_ok);
+extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
+ int first_ok);
extern void tty_release_dev(struct file *filp);
extern struct mutex tty_mutex;
From: Sukadev Bhattiprolu <[email protected]>
Move tty_driver_lookup_tty() and tty_reopen() from tty_init_dev()
into tty_open() (one of the two callers of tty_init_dev()). These
calls are not really required in ptmx_open(), the other caller,
since ptmx_open() would be setting up a new tty.
Changelog[v2]:
- remove the lookup and reopen calls from ptmx_open
- merge with recent changes to ttydev tree
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 31 ++++++++++++++++---------------
1 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e881e9e..36098ee 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1376,19 +1376,6 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
struct tty_struct *tty;
int retval;
- /* check whether we're reopening an existing tty */
- tty = tty_driver_lookup_tty(driver, idx);
-
- if (IS_ERR(tty))
- return tty;
-
- if (tty) {
- retval = tty_reopen(tty);
- if (retval)
- return ERR_PTR(retval);
- return tty;
- }
-
/* Check if pty master is being opened multiple times */
if (driver->subtype == PTY_TYPE_MASTER &&
(driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok)
@@ -1790,7 +1777,7 @@ void tty_release_dev(struct file *filp)
static int __tty_open(struct inode *inode, struct file *filp)
{
- struct tty_struct *tty;
+ struct tty_struct *tty = NULL;
int noctty, retval;
struct tty_driver *driver;
int index;
@@ -1847,7 +1834,21 @@ retry_open:
return -ENODEV;
}
got_driver:
- tty = tty_init_dev(driver, index, 0);
+ if (!tty) {
+ /* check whether we're reopening an existing tty */
+ tty = tty_driver_lookup_tty(driver, index);
+
+ if (IS_ERR(tty))
+ return PTR_ERR(tty);
+ }
+
+ if (tty) {
+ retval = tty_reopen(tty);
+ if (retval)
+ tty = ERR_PTR(retval);
+ } else
+ tty = tty_init_dev(driver, index, 0);
+
mutex_unlock(&tty_mutex);
tty_driver_kref_put(driver);
if (IS_ERR(tty))
From: Sukadev Bhattiprolu <[email protected]>
As pointed out by H. Peter Anvin, since the inode for the pty is known,
we don't need to look it up.
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
fs/devpts/inode.c | 17 +++++------------
1 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 638db9b..b292ed7 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -27,6 +27,7 @@
#define DEVPTS_SUPER_MAGIC 0x1cd1
#define DEVPTS_DEFAULT_MODE 0600
+#define PTMX_MINOR 2
extern int pty_limit; /* Config limit on Unix98 ptys */
static DEFINE_IDA(allocated_ptys);
@@ -247,19 +248,11 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
{
- struct dentry *dentry = get_node(number);
- struct tty_struct *tty;
-
- tty = NULL;
- if (!IS_ERR(dentry)) {
- if (dentry->d_inode)
- tty = dentry->d_inode->i_private;
- dput(dentry);
- }
-
- mutex_unlock(&devpts_root->d_inode->i_mutex);
+ BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
- return tty;
+ if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
+ return (struct tty_struct *)pts_inode->i_private;
+ return NULL;
}
void devpts_pty_kill(struct tty_struct *tty)
From: Sukadev Bhattiprolu <[email protected]>
Pass-in 'inode' or 'tty' parameter to devpts interfaces. With multiple
devpts instances, these parameters will be used in subsequent patches
to identify the instance of devpts mounted. The parameters also help
simplify devpts implementation.
Changelog[v3]:
- minor changes due to merge with ttydev updates
- rename parameters to emphasize they are ptmx or pts inodes
- pass-in tty_struct * to devpts_pty_kill() (this will help
cleanup the get_node() call in a subsequent patch)
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 18 ++++++++++--------
drivers/char/tty_io.c | 14 ++++++++------
fs/devpts/inode.c | 11 ++++++-----
include/linux/devpts_fs.h | 31 +++++++++++++++++++++----------
include/linux/tty_driver.h | 3 ++-
5 files changed, 47 insertions(+), 30 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index c5a192d..a391bad 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -60,7 +60,7 @@ static void pty_close(struct tty_struct * tty, struct file * filp)
set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver)
- devpts_pty_kill(tty->index);
+ devpts_pty_kill(tty->link);
#endif
tty_vhangup(tty->link);
}
@@ -453,9 +453,10 @@ static int pty_unix98_ioctl(struct tty_struct *tty, struct file *file,
* This provides our locking.
*/
-static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, int idx)
+static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
+ struct inode *ptm_inode, int idx)
{
- struct tty_struct *tty = devpts_get_tty(idx);
+ struct tty_struct *tty = devpts_get_tty(ptm_inode, idx);
if (tty)
tty = tty->link;
return tty;
@@ -470,9 +471,10 @@ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, int idx)
* This provides our locking.
*/
-static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, int idx)
+static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
+ struct inode *pts_inode, int idx)
{
- struct tty_struct *tty = devpts_get_tty(idx);
+ struct tty_struct *tty = devpts_get_tty(pts_inode, idx);
/* Master must be open before slave */
if (!tty)
return ERR_PTR(-EIO);
@@ -602,7 +604,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
nonseekable_open(inode, filp);
/* find a device that is not in use. */
- index = devpts_new_index();
+ index = devpts_new_index(inode);
if (index < 0)
return index;
@@ -619,7 +621,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp)
filp->private_data = tty;
file_move(filp, &tty->tty_files);
- retval = devpts_pty_new(tty->link);
+ retval = devpts_pty_new(inode, tty->link);
if (retval)
goto out1;
@@ -630,7 +632,7 @@ out1:
tty_release_dev(filp);
return retval;
out:
- devpts_kill_index(index);
+ devpts_kill_index(inode, index);
return retval;
}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 36098ee..9590839 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1213,12 +1213,13 @@ static void tty_line_name(struct tty_driver *driver, int index, char *p)
* be held until the 'fast-open' is also done. Will change once we
* have refcounting in the driver and per driver locking
*/
-struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, int idx)
+struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
+ struct inode *inode, int idx)
{
struct tty_struct *tty;
if (driver->ops->lookup)
- return driver->ops->lookup(driver, idx);
+ return driver->ops->lookup(driver, inode, idx);
tty = driver->ttys[idx];
return tty;
@@ -1539,10 +1540,11 @@ void tty_release_dev(struct file *filp)
int devpts;
int idx;
char buf[64];
+ struct inode *inode;
+ inode = filp->f_path.dentry->d_inode;
tty = (struct tty_struct *)filp->private_data;
- if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode,
- "tty_release_dev"))
+ if (tty_paranoia_check(tty, inode, "tty_release_dev"))
return;
check_tty_count(tty, "tty_release_dev");
@@ -1751,7 +1753,7 @@ void tty_release_dev(struct file *filp)
/* Make this pty number available for reallocation */
if (devpts)
- devpts_kill_index(idx);
+ devpts_kill_index(inode, idx);
}
/**
@@ -1836,7 +1838,7 @@ retry_open:
got_driver:
if (!tty) {
/* check whether we're reopening an existing tty */
- tty = tty_driver_lookup_tty(driver, index);
+ tty = tty_driver_lookup_tty(driver, inode, index);
if (IS_ERR(tty))
return PTR_ERR(tty);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 488eb42..638db9b 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -177,7 +177,7 @@ static struct dentry *get_node(int num)
return lookup_one_len(s, root, sprintf(s, "%d", num));
}
-int devpts_new_index(void)
+int devpts_new_index(struct inode *ptmx_inode)
{
int index;
int ida_ret;
@@ -205,14 +205,14 @@ retry:
return index;
}
-void devpts_kill_index(int idx)
+void devpts_kill_index(struct inode *ptmx_inode, int idx)
{
mutex_lock(&allocated_ptys_lock);
ida_remove(&allocated_ptys, idx);
mutex_unlock(&allocated_ptys_lock);
}
-int devpts_pty_new(struct tty_struct *tty)
+int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
{
int number = tty->index; /* tty layer puts index from devpts_new_index() in here */
struct tty_driver *driver = tty->driver;
@@ -245,7 +245,7 @@ int devpts_pty_new(struct tty_struct *tty)
return 0;
}
-struct tty_struct *devpts_get_tty(int number)
+struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
{
struct dentry *dentry = get_node(number);
struct tty_struct *tty;
@@ -262,8 +262,9 @@ struct tty_struct *devpts_get_tty(int number)
return tty;
}
-void devpts_pty_kill(int number)
+void devpts_pty_kill(struct tty_struct *tty)
{
+ int number = tty->index;
struct dentry *dentry = get_node(number);
if (!IS_ERR(dentry)) {
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index 154769c..5ce0e5f 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -17,20 +17,31 @@
#ifdef CONFIG_UNIX98_PTYS
-int devpts_new_index(void);
-void devpts_kill_index(int idx);
-int devpts_pty_new(struct tty_struct *tty); /* mknod in devpts */
-struct tty_struct *devpts_get_tty(int number); /* get tty structure */
-void devpts_pty_kill(int number); /* unlink */
+int devpts_new_index(struct inode *ptmx_inode);
+void devpts_kill_index(struct inode *ptmx_inode, int idx);
+/* mknod in devpts */
+int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
+/* get tty structure */
+struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+/* unlink */
+void devpts_pty_kill(struct tty_struct *tty);
#else
/* Dummy stubs in the no-pty case */
-static inline int devpts_new_index(void) { return -EINVAL; }
-static inline void devpts_kill_index(int idx) { }
-static inline int devpts_pty_new(struct tty_struct *tty) { return -EINVAL; }
-static inline struct tty_struct *devpts_get_tty(int number) { return NULL; }
-static inline void devpts_pty_kill(int number) { }
+static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
+static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
+static inline int devpts_pty_new(struct inode *ptmx_inode,
+ struct tty_struct *tty)
+{
+ return -EINVAL;
+}
+static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
+ int number)
+{
+ return NULL;
+}
+static inline void devpts_pty_kill(struct tty_struct *tty) { }
#endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 005d06a..78416b9 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -225,7 +225,8 @@ struct tty_struct;
struct tty_driver;
struct tty_operations {
- struct tty_struct * (*lookup)(struct tty_driver *driver, int idx);
+ struct tty_struct * (*lookup)(struct tty_driver *driver,
+ struct inode *inode, int idx);
int (*install)(struct tty_driver *driver, struct tty_struct *tty);
void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
int (*open)(struct tty_struct * tty, struct file * filp);
The majority of the remaining init_dev code is pty special cases. We
refactor this code into the driver->install method.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 126 ++++++++++++++++++++++++++++---
drivers/char/tty_io.c | 198 +++++++++++++++++--------------------------------
include/linux/tty.h | 5 +
3 files changed, 187 insertions(+), 142 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index c984500..c5a192d 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -227,7 +227,58 @@ static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios
tty->termios->c_cflag |= (CS8 | CREAD);
}
+static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct tty_struct *o_tty;
+ int idx = tty->index;
+ int retval;
+
+ o_tty = alloc_tty_struct();
+ if (!o_tty)
+ return -ENOMEM;
+ if (!try_module_get(driver->other->owner)) {
+ /* This cannot in fact currently happen */
+ free_tty_struct(o_tty);
+ return -ENOMEM;
+ }
+ initialize_tty_struct(o_tty, driver->other, idx);
+
+ /* We always use new tty termios data so we can do this
+ the easy way .. */
+ retval = tty_init_termios(tty);
+ if (retval)
+ goto free_mem_out;
+
+ retval = tty_init_termios(o_tty);
+ if (retval) {
+ tty_free_termios(tty);
+ goto free_mem_out;
+ }
+
+ /*
+ * Everything allocated ... set up the o_tty structure.
+ */
+ driver->other->ttys[idx] = o_tty;
+ tty_driver_kref_get(driver->other);
+ if (driver->subtype == PTY_TYPE_MASTER)
+ o_tty->count++;
+ /* Establish the links in both directions */
+ tty->link = o_tty;
+ o_tty->link = tty;
+
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return 0;
+free_mem_out:
+ module_put(o_tty->driver->owner);
+ free_tty_struct(o_tty);
+ return -ENOMEM;
+}
+
+
static const struct tty_operations pty_ops = {
+ .install = pty_install,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -332,6 +383,7 @@ static inline void legacy_pty_init(void) { }
int pty_limit = NR_UNIX98_PTY_DEFAULT;
static int pty_limit_min = 0;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
+static int pty_count = 0;
static struct cdev ptmx_cdev;
@@ -351,6 +403,7 @@ static struct ctl_table pty_table[] = {
.procname = "nr",
.maxlen = sizeof(int),
.mode = 0444,
+ .data = &pty_count,
.proc_handler = &proc_dointvec,
}, {
.ctl_name = 0
@@ -426,7 +479,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, int idx)
return tty;
}
-static void pty_shutdown(struct tty_struct *tty)
+static void pty_unix98_shutdown(struct tty_struct *tty)
{
/* We have our own method as we don't use the tty index */
kfree(tty->termios);
@@ -436,19 +489,71 @@ static void pty_shutdown(struct tty_struct *tty)
/* We have no need to install and remove our tty objects as devpts does all
the work for us */
-static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
{
+ struct tty_struct *o_tty;
+ int idx = tty->index;
+
+ o_tty = alloc_tty_struct();
+ if (!o_tty)
+ return -ENOMEM;
+ if (!try_module_get(driver->other->owner)) {
+ /* This cannot in fact currently happen */
+ free_tty_struct(o_tty);
+ return -ENOMEM;
+ }
+ initialize_tty_struct(o_tty, driver->other, idx);
+
+ tty->termios = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (tty->termios == NULL)
+ goto free_mem_out;
+ *tty->termios = driver->init_termios;
+ tty->termios_locked = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (tty->termios_locked == NULL)
+ goto free_mem_out;
+ o_tty->termios = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (o_tty->termios == NULL)
+ goto free_mem_out;
+ *o_tty->termios = driver->other->init_termios;
+ o_tty->termios_locked = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (o_tty->termios_locked == NULL)
+ goto free_mem_out;
+
+ tty_driver_kref_get(driver->other);
+ if (driver->subtype == PTY_TYPE_MASTER)
+ o_tty->count++;
+ /* Establish the links in both directions */
+ tty->link = o_tty;
+ o_tty->link = tty;
+ /*
+ * All structures have been allocated, so now we install them.
+ * Failures after this point use release_tty to clean up, so
+ * there's no need to null out the local pointers.
+ */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ pty_count++;
return 0;
+free_mem_out:
+ kfree(o_tty->termios);
+ module_put(o_tty->driver->owner);
+ free_tty_struct(o_tty);
+ kfree(tty->termios_locked);
+ kfree(tty->termios);
+ free_tty_struct(tty);
+ module_put(driver->owner);
+ return -ENOMEM;
}
-static void pty_remove(struct tty_driver *driver, struct tty_struct *tty)
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
+ pty_count--;
}
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
- .install = pty_install,
- .remove = pty_remove,
+ .install = pty_unix98_install,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -458,13 +563,13 @@ static const struct tty_operations ptm_unix98_ops = {
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
- .shutdown = pty_shutdown
+ .shutdown = pty_unix98_shutdown
};
static const struct tty_operations pty_unix98_ops = {
.lookup = pts_unix98_lookup,
- .install = pty_install,
- .remove = pty_remove,
+ .install = pty_unix98_install,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -473,6 +578,7 @@ static const struct tty_operations pty_unix98_ops = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
+ .shutdown = pty_unix98_shutdown
};
/**
@@ -589,10 +695,6 @@ static void __init unix98_pty_init(void)
if (tty_register_driver(pts_driver))
panic("Couldn't register Unix98 pts driver");
- /* FIXME: WTF */
-#if 0
- pty_table[1].data = &ptm_driver->refcount;
-#endif
register_sysctl_table(pty_root_table);
/* Now create the /dev/ptmx special device */
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index b0ad488..e881e9e 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -136,8 +136,6 @@ LIST_HEAD(tty_drivers); /* linked list of tty drivers */
DEFINE_MUTEX(tty_mutex);
EXPORT_SYMBOL(tty_mutex);
-static void initialize_tty_struct(struct tty_struct *tty);
-
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
ssize_t redirected_tty_write(struct file *, const char __user *,
@@ -166,7 +164,7 @@ static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
* Locking: none
*/
-static struct tty_struct *alloc_tty_struct(void)
+struct tty_struct *alloc_tty_struct(void)
{
return kzalloc(sizeof(struct tty_struct), GFP_KERNEL);
}
@@ -180,7 +178,7 @@ static struct tty_struct *alloc_tty_struct(void)
* Locking: none. Must be called after tty is definitely unused
*/
-static inline void free_tty_struct(struct tty_struct *tty)
+void free_tty_struct(struct tty_struct *tty)
{
kfree(tty->write_buf);
tty_buffer_free_all(tty);
@@ -1227,22 +1225,70 @@ struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, int idx)
}
/**
+ * tty_init_termios - helper for termios setup
+ * @tty: the tty to set up
+ *
+ * Initialise the termios structures for this tty. Thus runs under
+ * the tty_mutex currently so we can be relaxed about ordering.
+ */
+
+int tty_init_termios(struct tty_struct *tty)
+{
+ struct ktermios *tp, *ltp;
+ int idx = tty->index;
+
+ tp = tty->driver->termios[idx];
+ ltp = tty->driver->termios_locked[idx];
+ if (tp == NULL) {
+ WARN_ON(ltp != NULL);
+ tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (tp == NULL || ltp == NULL) {
+ kfree(tp);
+ kfree(ltp);
+ return -ENOMEM;
+ }
+ memcpy(tp, &tty->driver->init_termios,
+ sizeof(struct ktermios));
+ tty->driver->termios[idx] = tp;
+ tty->driver->termios_locked[idx] = ltp;
+ }
+ tty->termios = tp;
+ tty->termios_locked = ltp;
+
+ /* Compatibility until drivers always set this */
+ tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+ tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ return 0;
+}
+
+/**
* tty_driver_install_tty() - install a tty entry in the driver
* @driver: the driver for the tty
* @tty: the tty
*
* Install a tty object into the driver tables. The tty->index field
- * will be set by the time this is called.
+ * will be set by the time this is called. This method is responsible
+ * for ensuring any need additional structures are allocated and
+ * configured.
*
* Locking: tty_mutex for now
*/
static int tty_driver_install_tty(struct tty_driver *driver,
struct tty_struct *tty)
{
+ int idx = tty->index;
+
if (driver->ops->install)
return driver->ops->install(driver, tty);
- driver->ttys[tty->index] = tty;
- return 0;
+
+ if (tty_init_termios(tty) == 0) {
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return 0;
+ }
+ return -ENOMEM;
}
/**
@@ -1327,9 +1373,7 @@ static int tty_reopen(struct tty_struct *tty)
struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
int first_ok)
{
- struct tty_struct *tty, *o_tty;
- struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
- struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
+ struct tty_struct *tty;
int retval;
/* check whether we're reopening an existing tty */
@@ -1361,118 +1405,17 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
if (!try_module_get(driver->owner))
return ERR_PTR(-ENODEV);
- o_tty = NULL;
- tp = o_tp = NULL;
- ltp = o_ltp = NULL;
-
tty = alloc_tty_struct();
if (!tty)
goto fail_no_mem;
- initialize_tty_struct(tty);
- tty->driver = driver;
- tty->ops = driver->ops;
- tty->index = idx;
- tty_line_name(driver, idx, tty->name);
-
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- tp_loc = &tty->termios;
- ltp_loc = &tty->termios_locked;
- } else {
- tp_loc = &driver->termios[idx];
- ltp_loc = &driver->termios_locked[idx];
- }
-
- if (!*tp_loc) {
- tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!tp)
- goto free_mem_out;
- *tp = driver->init_termios;
- }
-
- if (!*ltp_loc) {
- ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!ltp)
- goto free_mem_out;
- }
-
- if (driver->type == TTY_DRIVER_TYPE_PTY) {
- o_tty = alloc_tty_struct();
- if (!o_tty)
- goto free_mem_out;
- if (!try_module_get(driver->other->owner)) {
- /* This cannot in fact currently happen */
- free_tty_struct(o_tty);
- o_tty = NULL;
- goto free_mem_out;
- }
- initialize_tty_struct(o_tty);
- o_tty->driver = driver->other;
- o_tty->ops = driver->ops;
- o_tty->index = idx;
- tty_line_name(driver->other, idx, o_tty->name);
-
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- o_tp_loc = &o_tty->termios;
- o_ltp_loc = &o_tty->termios_locked;
- } else {
- o_tp_loc = &driver->other->termios[idx];
- o_ltp_loc = &driver->other->termios_locked[idx];
- }
-
- if (!*o_tp_loc) {
- o_tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!o_tp)
- goto free_mem_out;
- *o_tp = driver->other->init_termios;
- }
-
- if (!*o_ltp_loc) {
- o_ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!o_ltp)
- goto free_mem_out;
- }
-
- /*
- * Everything allocated ... set up the o_tty structure.
- */
- if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM))
- driver->other->ttys[idx] = o_tty;
- if (!*o_tp_loc)
- *o_tp_loc = o_tp;
- if (!*o_ltp_loc)
- *o_ltp_loc = o_ltp;
- o_tty->termios = *o_tp_loc;
- o_tty->termios_locked = *o_ltp_loc;
- tty_driver_kref_get(driver->other);
- if (driver->subtype == PTY_TYPE_MASTER)
- o_tty->count++;
-
- /* Establish the links in both directions */
- tty->link = o_tty;
- o_tty->link = tty;
- }
-
- /*
- * All structures have been allocated, so now we install them.
- * Failures after this point use release_tty to clean up, so
- * there's no need to null out the local pointers.
- */
-
- if (!*tp_loc)
- *tp_loc = tp;
- if (!*ltp_loc)
- *ltp_loc = ltp;
- tty->termios = *tp_loc;
- tty->termios_locked = *ltp_loc;
- /* Compatibility until drivers always set this */
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
- tty_driver_kref_get(driver);
- tty->count++;
+ initialize_tty_struct(tty, driver, idx);
retval = tty_driver_install_tty(driver, tty);
- if (retval < 0)
- goto release_mem_out;
+ if (retval < 0) {
+ free_tty_struct(tty);
+ module_put(driver->owner);
+ return ERR_PTR(retval);
+ }
/*
* Structures all installed ... call the ldisc open routines.
@@ -1480,22 +1423,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
* to decrement the use counts, as release_tty doesn't care.
*/
- retval = tty_ldisc_setup(tty, o_tty);
+ retval = tty_ldisc_setup(tty, tty->link);
if (retval)
goto release_mem_out;
return tty;
- /* Release locally allocated memory ... nothing placed in slots */
-free_mem_out:
- kfree(o_tp);
- if (o_tty) {
- module_put(o_tty->driver->owner);
- free_tty_struct(o_tty);
- }
- kfree(ltp);
- kfree(tp);
- free_tty_struct(tty);
-
fail_no_mem:
module_put(driver->owner);
return ERR_PTR(-ENOMEM);
@@ -2852,7 +2784,8 @@ EXPORT_SYMBOL(do_SAK);
* Locking: none - tty in question must not be exposed at this point
*/
-static void initialize_tty_struct(struct tty_struct *tty)
+void initialize_tty_struct(struct tty_struct *tty,
+ struct tty_driver *driver, int idx)
{
memset(tty, 0, sizeof(struct tty_struct));
kref_init(&tty->kref);
@@ -2873,6 +2806,11 @@ static void initialize_tty_struct(struct tty_struct *tty)
spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
+
+ tty->driver = driver;
+ tty->ops = driver->ops;
+ tty->index = idx;
+ tty_line_name(driver, idx, tty->name);
}
/**
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 54523a3..3c7c757 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -401,9 +401,14 @@ extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
+extern struct tty_struct *alloc_tty_struct(void);
+extern void free_tty_struct(struct tty_struct *tty);
+extern void initialize_tty_struct(struct tty_struct *tty,
+ struct tty_driver *driver, int idx);
extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
int first_ok);
extern void tty_release_dev(struct file *filp);
+extern int tty_init_termios(struct tty_struct *tty);
extern struct mutex tty_mutex;
From: Sukadev Bhattiprolu <[email protected]>
devpts_pty_new() is called when setting up a new pty and would not
will not have an existing dentry or inode for the pty. So don't bother
looking for an existing dentry - just create a new one.
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
fs/devpts/inode.c | 11 ++++++++---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index b292ed7..50e885f 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -220,6 +220,7 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct inode *inode = new_inode(devpts_mnt->mnt_sb);
+ char s[12];
/* We're supposed to be given the slave end of a pty */
BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
@@ -235,9 +236,13 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
init_special_inode(inode, S_IFCHR|config.mode, device);
inode->i_private = tty;
- dentry = get_node(number);
- if (!IS_ERR(dentry) && !dentry->d_inode) {
- d_instantiate(dentry, inode);
+ sprintf(s, "%d", number);
+
+ mutex_lock(&devpts_root->d_inode->i_mutex);
+
+ dentry = d_alloc_name(devpts_root, s);
+ if (!IS_ERR(dentry)) {
+ d_add(dentry, inode);
fsnotify_create(devpts_root->d_inode, dentry);
}
From: Sukadev Bhattiprolu <[email protected]>
When creating a new pty, save the pty's inode in the tty->driver_data.
Use this inode in pty_kill() to identify the devpts instance. Since
we now have the inode for the pty, we can skip get_node() lookup and
remove the unused get_node().
TODO:
- check if the mutex_lock is needed in pty_kill().
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
fs/devpts/inode.c | 29 ++++++++++++-----------------
1 files changed, 12 insertions(+), 17 deletions(-)
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 50e885f..a70d5d0 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -170,14 +170,6 @@ static struct file_system_type devpts_fs_type = {
* to the System V naming convention
*/
-static struct dentry *get_node(int num)
-{
- char s[12];
- struct dentry *root = devpts_root;
- mutex_lock(&root->d_inode->i_mutex);
- return lookup_one_len(s, root, sprintf(s, "%d", num));
-}
-
int devpts_new_index(struct inode *ptmx_inode)
{
int index;
@@ -235,6 +227,7 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|config.mode, device);
inode->i_private = tty;
+ tty->driver_data = inode;
sprintf(s, "%d", number);
@@ -262,18 +255,20 @@ struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
void devpts_pty_kill(struct tty_struct *tty)
{
- int number = tty->index;
- struct dentry *dentry = get_node(number);
+ struct inode *inode = tty->driver_data;
+ struct dentry *dentry;
- if (!IS_ERR(dentry)) {
- struct inode *inode = dentry->d_inode;
- if (inode) {
- inode->i_nlink--;
- d_delete(dentry);
- dput(dentry);
- }
+ BUG_ON(inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
+
+ mutex_lock(&devpts_root->d_inode->i_mutex);
+
+ dentry = d_find_alias(inode);
+ if (dentry && !IS_ERR(dentry)) {
+ inode->i_nlink--;
+ d_delete(dentry);
dput(dentry);
}
+
mutex_unlock(&devpts_root->d_inode->i_mutex);
}
We've done the heavy lifting now its time to mop up a bit
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 86 +++++++++++++++++++++++++++-------------------------
1 files changed, 44 insertions(+), 42 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index a391bad..c3ab8c3 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -8,10 +8,12 @@
* Added TTY_DO_WRITE_WAKEUP to enable n_tty to send POLL_OUT to
* waiting writers -- Sapan Bhatia <[email protected]>
*
- *
+ * When reading this code see also fs/devpts. In particular note that the
+ * driver_data field is used by the devpts side as a binding to the devpts
+ * inode.
*/
-#include <linux/module.h> /* For EXPORT_SYMBOL */
+#include <linux/module.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -24,26 +26,24 @@
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/device.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
+#include <linux/uaccess.h>
#include <linux/bitops.h>
#include <linux/devpts_fs.h>
+#include <asm/system.h>
+
/* These are global because they are accessed in tty_io.c */
#ifdef CONFIG_UNIX98_PTYS
struct tty_driver *ptm_driver;
static struct tty_driver *pts_driver;
#endif
-static void pty_close(struct tty_struct * tty, struct file * filp)
+static void pty_close(struct tty_struct *tty, struct file *filp)
{
- if (!tty)
- return;
- if (tty->driver->subtype == PTY_TYPE_MASTER) {
- if (tty->count > 1)
- printk("master pty_close: count = %d!!\n", tty->count);
- } else {
+ BUG_ON(!tty);
+ if (tty->driver->subtype == PTY_TYPE_MASTER)
+ WARN_ON(tty->count > 1);
+ else {
if (tty->count > 2)
return;
}
@@ -70,13 +70,13 @@ static void pty_close(struct tty_struct * tty, struct file * filp)
* The unthrottle routine is called by the line discipline to signal
* that it can receive more characters. For PTY's, the TTY_THROTTLED
* flag is always set, to force the line discipline to always call the
- * unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE
+ * unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE
* characters in the queue. This is necessary since each time this
* happens, we need to wake up any sleeping processes that could be
* (1) trying to send data to the pty, or (2) waiting in wait_until_sent()
* for the pty buffer to be drained.
*/
-static void pty_unthrottle(struct tty_struct * tty)
+static void pty_unthrottle(struct tty_struct *tty)
{
struct tty_struct *o_tty = tty->link;
@@ -88,7 +88,7 @@ static void pty_unthrottle(struct tty_struct * tty)
}
/*
- * WSH 05/24/97: modified to
+ * WSH 05/24/97: modified to
* (1) use space in tty->flip instead of a shared temp buffer
* The flip buffers aren't being used for a pty, so there's lots
* of space available. The buffer is protected by a per-pty
@@ -101,7 +101,8 @@ static void pty_unthrottle(struct tty_struct * tty)
* not our partners. We can't just take the other one blindly without
* risking deadlocks.
*/
-static int pty_write(struct tty_struct * tty, const unsigned char *buf, int count)
+static int pty_write(struct tty_struct *tty, const unsigned char *buf,
+ int count)
{
struct tty_struct *to = tty->link;
int c;
@@ -113,7 +114,7 @@ static int pty_write(struct tty_struct * tty, const unsigned char *buf, int coun
if (c > count)
c = count;
to->ldisc.ops->receive_buf(to, buf, NULL, c);
-
+
return c;
}
@@ -129,17 +130,17 @@ static int pty_write_room(struct tty_struct *tty)
/*
* WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior
- * The chars_in_buffer() value is used by the ldisc select() function
+ * The chars_in_buffer() value is used by the ldisc select() function
* to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
* The pty driver chars_in_buffer() Master/Slave must behave differently:
*
* The Master side needs to allow typed-ahead commands to accumulate
* while being canonicalized, so we report "our buffer" as empty until
* some threshold is reached, and then report the count. (Any count >
- * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
- * the count returned must be 0 if no canonical data is available to be
+ * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
+ * the count returned must be 0 if no canonical data is available to be
* read. (The N_TTY ldisc.chars_in_buffer now knows this.)
- *
+ *
* The Slave side passes all characters in raw mode to the Master side's
* buffer where they can be read immediately, so in this case we can
* return the true count in the buffer.
@@ -156,21 +157,22 @@ static int pty_chars_in_buffer(struct tty_struct *tty)
/* The ldisc must report 0 if no characters available to be read */
count = to->ldisc.ops->chars_in_buffer(to);
- if (tty->driver->subtype == PTY_TYPE_SLAVE) return count;
+ if (tty->driver->subtype == PTY_TYPE_SLAVE)
+ return count;
- /* Master side driver ... if the other side's read buffer is less than
+ /* Master side driver ... if the other side's read buffer is less than
* half full, return 0 to allow writers to proceed; otherwise return
- * the count. This leaves a comfortable margin to avoid overflow,
+ * the count. This leaves a comfortable margin to avoid overflow,
* and still allows half a buffer's worth of typed-ahead commands.
*/
- return ((count < N_TTY_BUF_SIZE/2) ? 0 : count);
+ return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
}
/* Set the lock flag on a pty */
-static int pty_set_lock(struct tty_struct *tty, int __user * arg)
+static int pty_set_lock(struct tty_struct *tty, int __user *arg)
{
int val;
- if (get_user(val,arg))
+ if (get_user(val, arg))
return -EFAULT;
if (val)
set_bit(TTY_PTY_LOCK, &tty->flags);
@@ -183,13 +185,13 @@ static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
unsigned long flags;
-
+
if (!to)
return;
-
+
if (to->ldisc.ops->flush_buffer)
to->ldisc.ops->flush_buffer(to);
-
+
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
@@ -198,7 +200,7 @@ static void pty_flush_buffer(struct tty_struct *tty)
}
}
-static int pty_open(struct tty_struct *tty, struct file * filp)
+static int pty_open(struct tty_struct *tty, struct file *filp)
{
int retval = -ENODEV;
@@ -221,10 +223,11 @@ out:
return retval;
}
-static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void pty_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
- tty->termios->c_cflag &= ~(CSIZE | PARENB);
- tty->termios->c_cflag |= (CS8 | CREAD);
+ tty->termios->c_cflag &= ~(CSIZE | PARENB);
+ tty->termios->c_cflag |= (CS8 | CREAD);
}
static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
@@ -254,7 +257,7 @@ static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
tty_free_termios(tty);
goto free_mem_out;
}
-
+
/*
* Everything allocated ... set up the o_tty structure.
*/
@@ -381,9 +384,9 @@ static inline void legacy_pty_init(void) { }
* Otherwise one can eat up all kernel memory by opening /dev/ptmx repeatedly.
*/
int pty_limit = NR_UNIX98_PTY_DEFAULT;
-static int pty_limit_min = 0;
+static int pty_limit_min;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
-static int pty_count = 0;
+static int pty_count;
static struct cdev ptmx_cdev;
@@ -537,11 +540,10 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
pty_count++;
return 0;
free_mem_out:
- kfree(o_tty->termios);
+ pty_unix98_shutdown(o_tty);
module_put(o_tty->driver->owner);
free_tty_struct(o_tty);
- kfree(tty->termios_locked);
- kfree(tty->termios);
+ pty_unix98_shutdown(tty);
free_tty_struct(tty);
module_put(driver->owner);
return -ENOMEM;
@@ -691,13 +693,13 @@ static void __init unix98_pty_init(void)
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
tty_set_operations(pts_driver, &pty_unix98_ops);
-
+
if (tty_register_driver(ptm_driver))
panic("Couldn't register Unix98 ptm driver");
if (tty_register_driver(pts_driver))
panic("Couldn't register Unix98 pts driver");
- register_sysctl_table(pty_root_table);
+ register_sysctl_table(pty_root_table);
/* Now create the /dev/ptmx special device */
tty_default_fops(&ptmx_fops);
The updating and moving around of the pty code added a bug where both the
helper and caller free the main tty struct (the pty driver must free the
o_tty pair itself however).
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index c3ab8c3..3c6b791 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -544,8 +544,6 @@ free_mem_out:
module_put(o_tty->driver->owner);
free_tty_struct(o_tty);
pty_unix98_shutdown(tty);
- free_tty_struct(tty);
- module_put(driver->owner);
return -ENOMEM;
}
We need both termios and termios_locked so allocate them as one
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/pty.c | 18 +++++++-----------
1 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 3c6b791..6d45827 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -488,7 +488,6 @@ static void pty_unix98_shutdown(struct tty_struct *tty)
{
/* We have our own method as we don't use the tty index */
kfree(tty->termios);
- kfree(tty->termios_locked);
}
/* We have no need to install and remove our tty objects as devpts does all
@@ -509,20 +508,17 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
}
initialize_tty_struct(o_tty, driver->other, idx);
- tty->termios = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
if (tty->termios == NULL)
goto free_mem_out;
*tty->termios = driver->init_termios;
- tty->termios_locked = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (tty->termios_locked == NULL)
- goto free_mem_out;
- o_tty->termios = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ tty->termios_locked = tty->termios + 1;
+
+ o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
if (o_tty->termios == NULL)
goto free_mem_out;
*o_tty->termios = driver->other->init_termios;
- o_tty->termios_locked = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (o_tty->termios_locked == NULL)
- goto free_mem_out;
+ o_tty->termios_locked = o_tty->termios + 1;
tty_driver_kref_get(driver->other);
if (driver->subtype == PTY_TYPE_MASTER)
@@ -540,10 +536,10 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
pty_count++;
return 0;
free_mem_out:
- pty_unix98_shutdown(o_tty);
+ kfree(o_tty->termios);
module_put(o_tty->driver->owner);
free_tty_struct(o_tty);
- pty_unix98_shutdown(tty);
+ kfree(tty->termios);
return -ENOMEM;
}
Copy the simplification from the pty unix98 special case to the generic one.
This allows us to kill off driver->termios_locked entirely which is nice. We
have to whack bits of the cris driver as it meddles in places it shouldn't
providing its own arrays that were never used anyway.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 46 +++++++---------------------------------------
drivers/serial/crisv10.c | 3 ---
2 files changed, 7 insertions(+), 42 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 9590839..502cad6 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1235,27 +1235,20 @@ struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
int tty_init_termios(struct tty_struct *tty)
{
- struct ktermios *tp, *ltp;
+ struct ktermios *tp;
int idx = tty->index;
tp = tty->driver->termios[idx];
- ltp = tty->driver->termios_locked[idx];
if (tp == NULL) {
- WARN_ON(ltp != NULL);
- tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
- ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (tp == NULL || ltp == NULL) {
- kfree(tp);
- kfree(ltp);
+ tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
+ if (tp == NULL)
return -ENOMEM;
- }
memcpy(tp, &tty->driver->init_termios,
sizeof(struct ktermios));
tty->driver->termios[idx] = tp;
- tty->driver->termios_locked[idx] = ltp;
}
tty->termios = tp;
- tty->termios_locked = ltp;
+ tty->termios_locked = tp + 1;
/* Compatibility until drivers always set this */
tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
@@ -1439,10 +1432,6 @@ void tty_free_termios(struct tty_struct *tty)
tp = tty->termios;
tty->driver->termios[idx] = NULL;
kfree(tp);
-
- tp = tty->termios_locked;
- tty->driver->termios_locked[idx] = NULL;
- kfree(tp);
}
}
EXPORT_SYMBOL(tty_free_termios);
@@ -1575,12 +1564,6 @@ void tty_release_dev(struct file *filp)
idx, tty->name);
return;
}
- if (tty->termios_locked != tty->driver->termios_locked[idx]) {
- printk(KERN_DEBUG "tty_release_dev: driver.termios_locked[%d] not "
- "termios_locked for (%s)\n",
- idx, tty->name);
- return;
- }
}
#endif
@@ -1604,13 +1587,6 @@ void tty_release_dev(struct file *filp)
idx, tty->name);
return;
}
- if (o_tty->termios_locked !=
- tty->driver->other->termios_locked[idx]) {
- printk(KERN_DEBUG "tty_release_dev: other->termios_locked["
- "%d] not o_termios_locked for (%s)\n",
- idx, tty->name);
- return;
- }
if (o_tty->link != tty) {
printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
return;
@@ -2930,18 +2906,13 @@ static void destruct_tty_driver(struct kref *kref)
driver->termios[i] = NULL;
kfree(tp);
}
- tp = driver->termios_locked[i];
- if (tp) {
- driver->termios_locked[i] = NULL;
- kfree(tp);
- }
if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
tty_unregister_device(driver, i);
}
p = driver->ttys;
proc_tty_unregister_driver(driver);
driver->ttys = NULL;
- driver->termios = driver->termios_locked = NULL;
+ driver->termios = NULL;
kfree(p);
cdev_del(&driver->cdev);
}
@@ -2978,7 +2949,7 @@ int tty_register_driver(struct tty_driver *driver)
void **p = NULL;
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
- p = kzalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
+ p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
if (!p)
return -ENOMEM;
}
@@ -3002,12 +2973,9 @@ int tty_register_driver(struct tty_driver *driver)
if (p) {
driver->ttys = (struct tty_struct **)p;
driver->termios = (struct ktermios **)(p + driver->num);
- driver->termios_locked = (struct ktermios **)
- (p + driver->num * 2);
} else {
driver->ttys = NULL;
driver->termios = NULL;
- driver->termios_locked = NULL;
}
cdev_init(&driver->cdev, &tty_fops);
@@ -3016,7 +2984,7 @@ int tty_register_driver(struct tty_driver *driver)
if (error) {
unregister_chrdev_region(dev, driver->num);
driver->ttys = NULL;
- driver->termios = driver->termios_locked = NULL;
+ driver->termios = NULL;
kfree(p);
return error;
}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index a467c77..211c217 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -457,7 +457,6 @@ static struct e100_serial rs_table[] = {
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
static struct ktermios *serial_termios[NR_PORTS];
-static struct ktermios *serial_termios_locked[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
@@ -4448,8 +4447,6 @@ rs_init(void)
driver->init_termios.c_ispeed = 115200;
driver->init_termios.c_ospeed = 115200;
driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- driver->termios = serial_termios;
- driver->termios_locked = serial_termios_locked;
tty_set_operations(driver, &rs_ops);
serial_driver = driver;
Move the set up on ldisc change into the ldisc
Move the INQ/OUTQ cases into the driver not in shared ioctl code where it
gives bogus answers for other ldisc values
Signed-off-by: Alan Cox <[email protected]>
---
drivers/bluetooth/hci_ldisc.c | 2 +-
drivers/char/n_hdlc.c | 2 +-
drivers/char/n_tty.c | 53 +++++++++++++++++++++++++++++++++++++++--
drivers/char/tty_ioctl.c | 42 ++------------------------------
include/linux/tty.h | 2 +-
5 files changed, 56 insertions(+), 45 deletions(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 8dfcf77..4426bb5 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -484,7 +484,7 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
return -EUNATCH;
default:
- err = n_tty_ioctl(tty, file, cmd, arg);
+ err = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
};
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 69ec639..bacb3e2 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -764,7 +764,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
break;
default:
- error = n_tty_ioctl (tty, file, cmd, arg);
+ error = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
}
return error;
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 708c2b1..b4f5dcc 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1011,8 +1011,20 @@ int is_ignored(int sig)
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- if (!tty)
- return;
+ int canon_change = 1;
+ BUG_ON(!tty);
+
+ if (old)
+ canon_change = (old->c_lflag ^ tty->termios->c_lflag) & ICANON;
+ if (canon_change) {
+ memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ tty->canon_head = tty->read_tail;
+ tty->canon_data = 0;
+ tty->erasing = 0;
+ }
+
+ if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+ wake_up_interruptible(&tty->read_wait);
tty->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
@@ -1573,6 +1585,43 @@ static unsigned int normal_poll(struct tty_struct *tty, struct file *file,
return mask;
}
+static unsigned long inq_canon(struct tty_struct *tty)
+{
+ int nr, head, tail;
+
+ if (!tty->canon_data || !tty->read_buf)
+ return 0;
+ head = tty->canon_head;
+ tail = tty->read_tail;
+ nr = (head - tail) & (N_TTY_BUF_SIZE-1);
+ /* Skip EOF-chars.. */
+ while (head != tail) {
+ if (test_bit(tail, tty->read_flags) &&
+ tty->read_buf[tail] == __DISABLED_CHAR)
+ nr--;
+ tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+ }
+ return nr;
+}
+
+static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int retval;
+
+ switch (cmd) {
+ case TIOCOUTQ:
+ return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
+ case TIOCINQ:
+ retval = tty->read_cnt;
+ if (L_ICANON(tty))
+ retval = inq_canon(tty);
+ return put_user(retval, (unsigned int __user *) arg);
+ default:
+ return n_tty_ioctl_helper(tty, file, cmd, arg);
+ }
+}
+
struct tty_ldisc_ops tty_ldisc_N_TTY = {
.magic = TTY_LDISC_MAGIC,
.name = "n_tty",
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 14cc19c..a408c8e 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -489,7 +489,6 @@ EXPORT_SYMBOL(tty_termios_hw_change);
static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
- int canon_change;
struct ktermios old_termios;
struct tty_ldisc *ld;
unsigned long flags;
@@ -505,18 +504,6 @@ static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
old_termios = *tty->termios;
*tty->termios = *new_termios;
unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
- canon_change = (old_termios.c_lflag ^ tty->termios->c_lflag) & ICANON;
- if (canon_change) {
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
- tty->canon_head = tty->read_tail;
- tty->canon_data = 0;
- tty->erasing = 0;
- }
-
- /* This bit should be in the ldisc code */
- if (canon_change && !L_ICANON(tty) && tty->read_cnt)
- /* Get characters left over from canonical mode. */
- wake_up_interruptible(&tty->read_wait);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
@@ -677,24 +664,6 @@ static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
#endif
-static unsigned long inq_canon(struct tty_struct *tty)
-{
- int nr, head, tail;
-
- if (!tty->canon_data || !tty->read_buf)
- return 0;
- head = tty->canon_head;
- tail = tty->read_tail;
- nr = (head - tail) & (N_TTY_BUF_SIZE-1);
- /* Skip EOF-chars.. */
- while (head != tail) {
- if (test_bit(tail, tty->read_flags) &&
- tty->read_buf[tail] == __DISABLED_CHAR)
- nr--;
- tail = (tail+1) & (N_TTY_BUF_SIZE-1);
- }
- return nr;
-}
#ifdef TIOCGETP
/*
@@ -1110,7 +1079,7 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
}
EXPORT_SYMBOL_GPL(tty_perform_flush);
-int n_tty_ioctl(struct tty_struct *tty, struct file *file,
+int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
unsigned long flags;
@@ -1148,13 +1117,6 @@ int n_tty_ioctl(struct tty_struct *tty, struct file *file,
return 0;
case TCFLSH:
return tty_perform_flush(tty, arg);
- case TIOCOUTQ:
- return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
- case TIOCINQ:
- retval = tty->read_cnt;
- if (L_ICANON(tty))
- retval = inq_canon(tty);
- return put_user(retval, (unsigned int __user *) arg);
case TIOCPKT:
{
int pktmode;
@@ -1180,4 +1142,4 @@ int n_tty_ioctl(struct tty_struct *tty, struct file *file,
return tty_mode_ioctl(tty, file, cmd, arg);
}
}
-EXPORT_SYMBOL(n_tty_ioctl);
+EXPORT_SYMBOL(n_tty_ioctl_helper);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 3c7c757..3b8121d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -466,7 +466,7 @@ static inline void tty_audit_push_task(struct task_struct *tsk,
#endif
/* tty_ioctl.c */
-extern int n_tty_ioctl(struct tty_struct *tty, struct file *file,
+extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
/* serial.c */
From: Stephen Rothwell <[email protected]>
Hi Alan,
Today's linux-next build (x86_64 allmodconfig) failed like this:
/drivers/char/tty_ioctl.c: In function 'change_termios':
drivers/isdn/capi/capi.c:1234: error: implicit declaration of function 'n_tty_ioctl'
drivers/isdn/gigaset/ser-gigaset.c: In function 'gigaset_tty_ioctl':
drivers/isdn/gigaset/ser-gigaset.c:648: error: implicit declaration of function 'n_tty_ioctl'
Introduced by commit 686b5e4aea05a80e370dc931b7f4a8d03c80da54
("tty-move-canon-specials"). I added the following patch (which may not
be correct).
--
Cheers,
Stephen Rothwell [email protected]
http://www.canb.auug.org.au/~sfr/
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/isdn/capi/capi.c | 2 +-
drivers/isdn/gigaset/ser-gigaset.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 871b0cb..798d7f3 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1231,7 +1231,7 @@ static int capinc_tty_ioctl(struct tty_struct *tty, struct file * file,
int error = 0;
switch (cmd) {
default:
- error = n_tty_ioctl (tty, file, cmd, arg);
+ error = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
}
return error;
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 5e89fa1..cc4f4e4 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -645,7 +645,7 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
case TCGETS:
case TCGETA:
/* pass through to underlying serial device */
- rc = n_tty_ioctl(tty, file, cmd, arg);
+ rc = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
case TCFLSH:
@@ -660,7 +660,7 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
break;
}
/* flush the serial port's buffer */
- rc = n_tty_ioctl(tty, file, cmd, arg);
+ rc = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
case FIONREAD:
Stephen's fixes reminded me that gigaset is still rather broken so fix it up
a bit
Signed-off-by: Alan Cox <[email protected]>
---
drivers/isdn/gigaset/ser-gigaset.c | 27 ++++++++++++---------------
1 files changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index cc4f4e4..07052ed 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -571,6 +571,7 @@ gigaset_tty_close(struct tty_struct *tty)
}
/* prevent other callers from entering ldisc methods */
+ /* FIXME: should use the tty state flags */
tty->disc_data = NULL;
if (!cs->hw.ser)
@@ -642,10 +643,11 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
return -ENXIO;
switch (cmd) {
- case TCGETS:
- case TCGETA:
- /* pass through to underlying serial device */
- rc = n_tty_ioctl_helper(tty, file, cmd, arg);
+
+ case FIONREAD:
+ /* unused, always return zero */
+ val = 0;
+ rc = put_user(val, p);
break;
case TCFLSH:
@@ -659,20 +661,13 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
flush_send_queue(cs);
break;
}
- /* flush the serial port's buffer */
- rc = n_tty_ioctl_helper(tty, file, cmd, arg);
- break;
-
- case FIONREAD:
- /* unused, always return zero */
- val = 0;
- rc = put_user(val, p);
- break;
+ /* Pass through */
default:
- rc = -ENOIOCTLCMD;
+ /* pass through to underlying serial device */
+ rc = n_tty_ioctl_helper(tty, file, cmd, arg);
+ break;
}
-
cs_put(cs);
return rc;
}
@@ -680,6 +675,8 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
/*
* Poll on the tty.
* Unused, always return zero.
+ *
+ * FIXME: should probably return an exception - especially on hangup
*/
static unsigned int
gigaset_tty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
Many tty drivers contain 'can't happen' checks against NULL pointers passed
in by the tty layer. These have never been possible to occur. Even more
importantly if they ever do occur we want to know as it would be a serious
bug.
---
drivers/char/amiserial.c | 6 ------
drivers/char/generic_serial.c | 21 ---------------------
drivers/char/istallion.c | 6 ------
drivers/char/mxser.c | 5 -----
drivers/char/n_r3964.c | 9 +--------
drivers/char/stallion.c | 34 ----------------------------------
6 files changed, 1 insertions(+), 80 deletions(-)
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 6e763e3..98821f9 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -837,9 +837,6 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch)
struct async_struct *info;
unsigned long flags;
- if (!tty)
- return 0;
-
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
@@ -892,9 +889,6 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count
struct async_struct *info;
unsigned long flags;
- if (!tty)
- return 0;
-
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_write"))
diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
index 19d3afb..c6090f8 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/char/generic_serial.c
@@ -54,8 +54,6 @@ int gs_put_char(struct tty_struct * tty, unsigned char ch)
func_enter ();
- if (!tty) return 0;
-
port = tty->driver_data;
if (!port) return 0;
@@ -97,8 +95,6 @@ int gs_write(struct tty_struct * tty,
func_enter ();
- if (!tty) return 0;
-
port = tty->driver_data;
if (!port) return 0;
@@ -185,7 +181,6 @@ static int gs_real_chars_in_buffer(struct tty_struct *tty)
struct gs_port *port;
func_enter ();
- if (!tty) return 0;
port = tty->driver_data;
if (!port->rd) return 0;
@@ -274,8 +269,6 @@ void gs_flush_buffer(struct tty_struct *tty)
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -296,8 +289,6 @@ void gs_flush_chars(struct tty_struct * tty)
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -321,8 +312,6 @@ void gs_stop(struct tty_struct * tty)
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -341,8 +330,6 @@ void gs_start(struct tty_struct * tty)
{
struct gs_port *port;
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -393,8 +380,6 @@ void gs_hangup(struct tty_struct *tty)
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
tty = port->port.tty;
if (!tty)
@@ -426,8 +411,6 @@ int gs_block_til_ready(void *port_, struct file * filp)
tty = port->port.tty;
- if (!tty) return 0;
-
gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n");
/*
* If the device is in the middle of being closed, then block
@@ -523,8 +506,6 @@ void gs_close(struct tty_struct * tty, struct file * filp)
func_enter ();
- if (!tty) return;
-
port = (struct gs_port *) tty->driver_data;
if (!port) return;
@@ -621,8 +602,6 @@ void gs_set_termios (struct tty_struct * tty,
func_enter();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 96ee112..505d7a1 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -1375,8 +1375,6 @@ static void stli_flushchars(struct tty_struct *tty)
stli_txcookrealsize = 0;
stli_txcooktty = NULL;
- if (tty == NULL)
- return;
if (cooktty == NULL)
return;
if (tty != cooktty)
@@ -1732,8 +1730,6 @@ static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
struct ktermios *tiosp;
asyport_t aport;
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1938,8 +1934,6 @@ static void stli_waituntilsent(struct tty_struct *tty, int timeout)
struct stliport *portp;
unsigned long tend;
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 308cb60..8beef50 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -616,9 +616,6 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd)
int quot = 0, baud;
unsigned char cval;
- if (!tty->termios)
- return -1;
-
if (!info->ioaddr)
return -1;
@@ -688,8 +685,6 @@ static int mxser_change_speed(struct tty_struct *tty,
int ret = 0;
unsigned char status;
- if (!tty->termios)
- return ret;
cflag = tty->termios->c_cflag;
if (!info->ioaddr)
return ret;
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index ae377aa..c0a1df9 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -372,15 +372,8 @@ static void remove_from_rx_queue(struct r3964_info *pInfo,
static void put_char(struct r3964_info *pInfo, unsigned char ch)
{
struct tty_struct *tty = pInfo->tty;
-
- if (tty == NULL)
- return;
-
/* FIXME: put_char should not be called from an IRQ */
- if (tty->ops->put_char) {
- tty->ops->put_char(tty, ch);
- }
- pInfo->bcc ^= ch;
+ tty_put_char(tty, ch);
}
static void flush(struct r3964_info *pInfo)
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 81b3234..8b8f07a 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -849,8 +849,6 @@ static void stl_flushbuffer(struct tty_struct *tty)
pr_debug("stl_flushbuffer(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -868,8 +866,6 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)
pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1036,8 +1032,6 @@ static int stl_putchar(struct tty_struct *tty, unsigned char ch)
pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == NULL)
- return -EINVAL;
portp = tty->driver_data;
if (portp == NULL)
return -EINVAL;
@@ -1073,8 +1067,6 @@ static void stl_flushchars(struct tty_struct *tty)
pr_debug("stl_flushchars(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1093,8 +1085,6 @@ static int stl_writeroom(struct tty_struct *tty)
pr_debug("stl_writeroom(tty=%p)\n", tty);
- if (tty == NULL)
- return 0;
portp = tty->driver_data;
if (portp == NULL)
return 0;
@@ -1125,8 +1115,6 @@ static int stl_charsinbuffer(struct tty_struct *tty)
pr_debug("stl_charsinbuffer(tty=%p)\n", tty);
- if (tty == NULL)
- return 0;
portp = tty->driver_data;
if (portp == NULL)
return 0;
@@ -1219,8 +1207,6 @@ static int stl_tiocmget(struct tty_struct *tty, struct file *file)
{
struct stlport *portp;
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
@@ -1236,8 +1222,6 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file,
struct stlport *portp;
int rts = -1, dtr = -1;
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
@@ -1266,8 +1250,6 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd
pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd,
arg);
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
@@ -1321,8 +1303,6 @@ static void stl_start(struct tty_struct *tty)
pr_debug("stl_start(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1338,8 +1318,6 @@ static void stl_settermios(struct tty_struct *tty, struct ktermios *old)
pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1373,8 +1351,6 @@ static void stl_throttle(struct tty_struct *tty)
pr_debug("stl_throttle(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1393,8 +1369,6 @@ static void stl_unthrottle(struct tty_struct *tty)
pr_debug("stl_unthrottle(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1414,8 +1388,6 @@ static void stl_stop(struct tty_struct *tty)
pr_debug("stl_stop(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1436,8 +1408,6 @@ static void stl_hangup(struct tty_struct *tty)
pr_debug("stl_hangup(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1470,8 +1440,6 @@ static int stl_breakctl(struct tty_struct *tty, int state)
pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
- if (tty == NULL)
- return -EINVAL;
portp = tty->driver_data;
if (portp == NULL)
return -EINVAL;
@@ -1488,8 +1456,6 @@ static void stl_sendxchar(struct tty_struct *tty, char ch)
pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
Remove/fix some bogus NULL checks, comment some locking etc
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/n_tty.c | 48 +++++++++++++++++++++++++++++++++++++-----------
1 files changed, 37 insertions(+), 11 deletions(-)
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index b4f5dcc..c0285b9 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -99,6 +99,7 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
static void n_tty_set_room(struct tty_struct *tty)
{
+ /* tty->read_cnt is not read locked ? */
int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
/*
@@ -121,6 +122,16 @@ static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
}
}
+/**
+ * put_tty_queue - add character to tty
+ * @c: character
+ * @tty: tty device
+ *
+ * Add a character to the tty read_buf queue. This is done under the
+ * read_lock to serialize character addition and also to protect us
+ * against parallel reads or flushes
+ */
+
static void put_tty_queue(unsigned char c, struct tty_struct *tty)
{
unsigned long flags;
@@ -137,14 +148,11 @@ static void put_tty_queue(unsigned char c, struct tty_struct *tty)
* check_unthrottle - allow new receive data
* @tty; tty device
*
- * Check whether to call the driver.unthrottle function.
- * We test the TTY_THROTTLED bit first so that it always
- * indicates the current state. The decision about whether
- * it is worth allowing more input has been taken by the caller.
+ * Check whether to call the driver unthrottle functions
+ *
* Can sleep, may be called under the atomic_read_lock mutex but
* this is not guaranteed.
*/
-
static void check_unthrottle(struct tty_struct *tty)
{
if (tty->count)
@@ -158,6 +166,8 @@ static void check_unthrottle(struct tty_struct *tty)
* Reset the read buffer counters, clear the flags,
* and make sure the driver is unthrottled. Called
* from n_tty_open() and n_tty_flush_buffer().
+ *
+ * Locking: tty_read_lock for read fields.
*/
static void reset_buffer_flags(struct tty_struct *tty)
{
@@ -181,7 +191,7 @@ static void reset_buffer_flags(struct tty_struct *tty)
* at hangup) or when the N_TTY line discipline internally has to
* clean the pending queue (for example some signals).
*
- * Locking: ctrl_lock
+ * Locking: ctrl_lock, read_lock.
*/
static void n_tty_flush_buffer(struct tty_struct *tty)
@@ -207,6 +217,8 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
*
* Report the number of characters buffered to be delivered to user
* at this instant in time.
+ *
+ * Locking: read_lock
*/
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
@@ -410,6 +422,8 @@ break_out:
*
* Echo user input back onto the screen. This must be called only when
* L_ECHO(tty) is true. Called from the driver receive_buf path.
+ *
+ * Relies on BKL for tty column locking
*/
static void echo_char(unsigned char c, struct tty_struct *tty)
@@ -422,6 +436,12 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
opost(c, tty);
}
+/**
+ * finsh_erasing - complete erase
+ * @tty: tty doing the erase
+ *
+ * Relies on BKL for tty column locking
+ */
static inline void finish_erasing(struct tty_struct *tty)
{
if (tty->erasing) {
@@ -439,6 +459,8 @@ static inline void finish_erasing(struct tty_struct *tty)
* Perform erase and necessary output when an erase character is
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
+ *
+ * Locking: read_lock for tty buffers, BKL for column/erasing state
*/
static void eraser(unsigned char c, struct tty_struct *tty)
@@ -447,6 +469,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
int head, seen_alnums, cnt;
unsigned long flags;
+ /* FIXME: locking needed ? */
if (tty->read_head == tty->canon_head) {
/* opost('\a', tty); */ /* what do you think? */
return;
@@ -481,6 +504,7 @@ static void eraser(unsigned char c, struct tty_struct *tty)
}
seen_alnums = 0;
+ /* FIXME: Locking ?? */
while (tty->read_head != tty->canon_head) {
head = tty->read_head;
@@ -583,6 +607,8 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* may caus terminal flushing to take place according to the termios
* settings and character used. Called from the driver receive_buf
* path so serialized.
+ *
+ * Locking: ctrl_lock, read_lock (both via flush buffer)
*/
static inline void isig(int sig, struct tty_struct *tty, int flush)
@@ -1007,6 +1033,8 @@ int is_ignored(int sig)
* and is protected from re-entry by the tty layer. The user is
* guaranteed that this function will not be re-entered or in progress
* when the ldisc is closed.
+ *
+ * Locking: Caller holds tty->termios_mutex
*/
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
@@ -1266,10 +1294,7 @@ static ssize_t read_chan(struct tty_struct *tty, struct file *file,
do_it_again:
- if (!tty->read_buf) {
- printk(KERN_ERR "n_tty_read_chan: read_buf == NULL?!?\n");
- return -EIO;
- }
+ BUG_ON(!tty->read_buf);
c = job_control(tty, file);
if (c < 0)
@@ -1589,7 +1614,7 @@ static unsigned long inq_canon(struct tty_struct *tty)
{
int nr, head, tail;
- if (!tty->canon_data || !tty->read_buf)
+ if (!tty->canon_data)
return 0;
head = tty->canon_head;
tail = tty->read_tail;
@@ -1613,6 +1638,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
case TIOCOUTQ:
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
+ /* FIXME: Locking */
retval = tty->read_cnt;
if (L_ICANON(tty))
retval = inq_canon(tty);
Checking tty == NULL doesn't help us unless we have a clear semantic for
the locking of the tty object in the driver. Use the tty kref objects so that
we can take references to the tty in the USB event handling paths.
Signed-off-by: Alan Cox <[email protected]>
---
drivers/net/usb/hso.c | 46 +++++++++++++++++++++++++++++++++++-----------
1 files changed, 35 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 6e42b5a..b764802 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1028,14 +1028,14 @@ static void _hso_serial_set_termios(struct tty_struct *tty,
termios->c_cflag |= CS8; /* character size 8 bits */
/* baud rate 115200 */
- tty_encode_baud_rate(serial->tty, 115200, 115200);
+ tty_encode_baud_rate(tty, 115200, 115200);
/*
* Force low_latency on; otherwise the pushes are scheduled;
* this is bad as it opens up the possibility of dropping bytes
* on the floor. We don't want to drop bytes on the floor. :)
*/
- serial->tty->low_latency = 1;
+ tty->low_latency = 1;
return;
}
@@ -1061,8 +1061,10 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
kref_get(&serial->parent->ref);
/* setup */
+ spin_lock_irq(&serial->serial_lock);
tty->driver_data = serial;
- serial->tty = tty;
+ serial->tty = tty_kref_get(tty);
+ spin_unlock_irq(&serial->serial_lock);
/* check for port allready opened, if not set the termios */
serial->open_count++;
@@ -1111,10 +1113,13 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
kref_put(&serial->parent->ref, hso_serial_ref_free);
if (serial->open_count <= 0) {
serial->open_count = 0;
- if (serial->tty) {
+ spin_lock_irq(&serial->serial_lock);
+ if (serial->tty == tty) {
serial->tty->driver_data = NULL;
serial->tty = NULL;
+ tty_kref_put(tty);
}
+ spin_unlock_irq(&serial->serial_lock);
if (!usb_gone)
hso_stop_serial_device(serial->parent);
}
@@ -1457,6 +1462,7 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb)
{
struct hso_serial *serial = urb->context;
int status = urb->status;
+ struct tty_struct *tty;
/* sanity check */
if (!serial) {
@@ -1466,14 +1472,18 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb)
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
+ tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
log_usb_status(status, __func__);
+ tty_kref_put(tty);
return;
}
hso_put_activity(serial->parent);
- if (serial->tty)
- tty_wakeup(serial->tty);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
hso_kick_transmit(serial);
D1(" ");
@@ -1510,6 +1520,7 @@ static void ctrl_callback(struct urb *urb)
struct hso_serial *serial = urb->context;
struct usb_ctrlrequest *req;
int status = urb->status;
+ struct tty_struct *tty;
/* sanity check */
if (!serial)
@@ -1517,9 +1528,11 @@ static void ctrl_callback(struct urb *urb)
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
+ tty = tty_kref_get(serial->tty);
spin_unlock(&serial->serial_lock);
if (status) {
log_usb_status(status, __func__);
+ tty_kref_put(tty);
return;
}
@@ -1544,17 +1557,18 @@ static void ctrl_callback(struct urb *urb)
clear_bit(HSO_SERIAL_FLAG_RX_SENT, &serial->flags);
} else {
hso_put_activity(serial->parent);
- if (serial->tty)
- tty_wakeup(serial->tty);
+ if (tty)
+ tty_wakeup(tty);
/* response to a write command */
hso_kick_transmit(serial);
}
+ tty_kref_put(tty);
}
/* handle RX data for serial port */
static void put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
{
- struct tty_struct *tty = serial->tty;
+ struct tty_struct *tty;
/* Sanity check */
if (urb == NULL || serial == NULL) {
@@ -1562,6 +1576,10 @@ static void put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
return;
}
+ spin_lock(&serial->serial_lock);
+ tty = tty_kref_get(serial->tty);
+ spin_unlock(&serial->serial_lock);
+
/* Push data to tty */
if (tty && urb->actual_length) {
D1("data to push to tty");
@@ -1569,6 +1587,7 @@ static void put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
}
/* read callback for Diag and CS port */
@@ -2635,15 +2654,20 @@ static void hso_serial_ref_free(struct kref *ref)
static void hso_free_interface(struct usb_interface *interface)
{
struct hso_serial *hso_dev;
+ struct tty_struct *tty;
int i;
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
if (serial_table[i]
&& (serial_table[i]->interface == interface)) {
hso_dev = dev2ser(serial_table[i]);
- if (hso_dev->tty)
- tty_hangup(hso_dev->tty);
+ spin_lock_irq(&hso_dev->serial_lock);
+ tty = tty_kref_get(hso_dev->tty);
+ spin_unlock_irq(&hso_dev->serial_lock);
+ if (tty)
+ tty_hangup(tty);
mutex_lock(&hso_dev->parent->mutex);
+ tty_kref_put(tty);
hso_dev->parent->usb_gone = 1;
mutex_unlock(&hso_dev->parent->mutex);
kref_put(&serial_table[i]->ref, hso_serial_ref_free);
Closes bug #11408 by checking the card index range for command 0
Fixes the ioctl to return ENOTTY which is correct for unknown ioctls
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/applicom.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 31d08b6..b899d91 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -712,8 +712,7 @@ static int ac_ioctl(struct inode *inode, struct file *file, unsigned int cmd, un
IndexCard = adgl->num_card-1;
- if(cmd != 0 && cmd != 6 &&
- ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
+ if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
static int warncount = 10;
if (warncount) {
printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
@@ -832,8 +831,7 @@ static int ac_ioctl(struct inode *inode, struct file *file, unsigned int cmd, un
}
break;
default:
- printk(KERN_INFO "APPLICOM driver ioctl, unknown function code %d\n",cmd) ;
- ret = -EINVAL;
+ ret = -ENOTTY;
break;
}
Dummy = readb(apbs[IndexCard].RamIO + VERS);
From: Andrew Morton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/serial_core.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98..308588e 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2154,12 +2154,11 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
switch (port->iotype) {
case UPIO_PORT:
- snprintf(address, sizeof(address),
- "I/O 0x%x", port->iobase);
+ snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase);
break;
case UPIO_HUB6:
snprintf(address, sizeof(address),
- "I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+ "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
break;
case UPIO_MEM:
case UPIO_MEM32:
From: David Miller <[email protected]>
This requires three changes:
1) Remove !SPARC restriction in Kconfig.
2) Move Sparc specific serial drivers before 8250, so that serial
console devices don't change names on us, even if 8250 finds
devices.
3) Since the Sparc specific serial drivers try to use the
same major/minor device namespace as 8250, some coordination
is necessary. Use the sunserial_*() layer routines to allocate
minor number space within TTY_MAJOR when CONFIG_SPARC.
This has no effect on other platforms.
Thanks to Josip Rodin for bringing up this issue and testing
plus debugging various revisions of this patch.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
arch/sparc/include/asm/serial.h | 6 ++++++
drivers/serial/8250.c | 18 +++++++++++++++++-
drivers/serial/Kconfig | 1 -
drivers/serial/Makefile | 15 ++++++++++-----
4 files changed, 33 insertions(+), 7 deletions(-)
create mode 100644 arch/sparc/include/asm/serial.h
diff --git a/arch/sparc/include/asm/serial.h b/arch/sparc/include/asm/serial.h
new file mode 100644
index 0000000..f90d61c
--- /dev/null
+++ b/arch/sparc/include/asm/serial.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_SERIAL_H
+#define __SPARC_SERIAL_H
+
+#define BASE_BAUD ( 1843200 / 16 )
+
+#endif /* __SPARC_SERIAL_H */
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e898edf..c07afb2 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -44,6 +44,10 @@
#include "8250.h"
+#ifdef CONFIG_SPARC
+#include "suncore.h"
+#endif
+
/*
* Configuration:
* share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
@@ -2721,7 +2725,6 @@ static struct uart_driver serial8250_reg = {
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
- .nr = UART_NR,
.cons = SERIAL8250_CONSOLE,
};
@@ -3003,7 +3006,12 @@ static int __init serial8250_init(void)
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
+#ifdef CONFIG_SPARC
+ ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+ serial8250_reg.nr = UART_NR;
ret = uart_register_driver(&serial8250_reg);
+#endif
if (ret)
goto out;
@@ -3028,7 +3036,11 @@ static int __init serial8250_init(void)
put_dev:
platform_device_put(serial8250_isa_devs);
unreg_uart_drv:
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
uart_unregister_driver(&serial8250_reg);
+#endif
out:
return ret;
}
@@ -3047,7 +3059,11 @@ static void __exit serial8250_exit(void)
platform_driver_unregister(&serial8250_isa_driver);
platform_device_unregister(isa_dev);
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
uart_unregister_driver(&serial8250_reg);
+#endif
}
module_init(serial8250_init);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0db2045..31786b3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -9,7 +9,6 @@ menu "Serial drivers"
# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
- depends on (BROKEN || !SPARC)
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 1462eb3..0c17c8d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -4,6 +4,16 @@
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
+
+# These Sparc drivers have to appear before others such as 8250
+# which share ttySx minor node space. Otherwise console device
+# names change and other unplesantries.
+obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
+obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
+obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
+obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
+obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+
obj-$(CONFIG_SERIAL_8250) += 8250.o
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
@@ -31,12 +41,7 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
-obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
-obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
-obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
-obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
From: David S. Miller <[email protected]>
The multiple drivers share the minor space occupied by a particular major
number, the actual index within the device name's space is indicated by
the tty_driver->name_base + uart_port->line
Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line
Use those to print the device names properly in such situations in
serial_core.c and 8250.c
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/serial/8250.c | 22 +++++++++++++++-------
drivers/serial/serial_core.c | 7 +++++--
2 files changed, 20 insertions(+), 9 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c07afb2..b43dad6 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -57,6 +57,13 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+ return (serial8250_reg.minor - 64) + port->line;
+}
+
/*
* Debugging.
*/
@@ -1001,7 +1008,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
return;
DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
- up->port.line, up->port.iobase, up->port.membase);
+ serial_index(&up->port), up->port.iobase, up->port.membase);
/*
* We really do need global IRQs disabled here - we're going to
@@ -1136,8 +1143,8 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
if (up->capabilities != uart_config[up->port.type].flags) {
printk(KERN_WARNING
"ttyS%d: detected caps %08x should be %08x\n",
- up->port.line, up->capabilities,
- uart_config[up->port.type].flags);
+ serial_index(&up->port), up->capabilities,
+ uart_config[up->port.type].flags);
}
up->port.fifosize = uart_config[up->port.type].fifo_size;
@@ -1902,7 +1909,8 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
- printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+ printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(&up->port));
return -ENODEV;
}
@@ -1957,7 +1965,8 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
up->bugs |= UART_BUG_THRE;
- pr_debug("ttyS%d - using backup timer\n", port->line);
+ pr_debug("ttyS%d - using backup timer\n",
+ serial_index(port));
}
}
@@ -2017,7 +2026,7 @@ static int serial8250_startup(struct uart_port *port)
if (!(up->bugs & UART_BUG_TXEN)) {
up->bugs |= UART_BUG_TXEN;
pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- port->line);
+ serial_index(port));
}
} else {
up->bugs &= ~UART_BUG_TXEN;
@@ -2678,7 +2687,6 @@ static int serial8250_console_early_setup(void)
return serial8250_find_port_for_earlycon();
}
-static struct uart_driver serial8250_reg;
static struct console serial8250_console = {
.name = "ttyS",
.write = serial8250_console_write,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 308588e..6bdf336 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2051,7 +2051,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
"transmitter\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
- drv->dev_name, port->line);
+ drv->dev_name,
+ drv->tty_driver->name_base + port->line);
ops->shutdown(port);
}
@@ -2176,7 +2177,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
- drv->dev_name, port->line, address, port->irq, uart_type(port));
+ drv->dev_name,
+ drv->tty_driver->name_base + port->line,
+ address, port->irq, uart_type(port));
}
static void
From: Jason Wessel <[email protected]>
This patch removes the private check for the termios_initialized for
the pl2303 usb driver. It forced the baud to 9600 on the first call
to pl2303_set_termios()
Based on the tty changes in the 2.6.27 kernel, the termios passed to
the *_set_termios functions is always populated the first time.
This means there is no need to privately initialize the settings the
first time, and doing so will not allow the use of the kernel
parameter "console=ttyUSB0,115200" as an example.
Signed-off-by: Jason Wessel <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/usb/serial/pl2303.c | 11 -----------
1 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ba74424..9084378 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -154,7 +154,6 @@ struct pl2303_private {
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
- u8 termios_initialized;
enum pl2303_type type;
};
@@ -526,16 +525,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
/* The PL2303 is reported to lose bytes if you change
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
From: Jason Wessel <[email protected]>
drivers/char/tty_io.c:1413:17: warning: symbol 'buf' shadows an earlier one
drivers/char/tty_io.c:1379:20: originally declared here
Signed-off-by: Jason Wessel <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
---
drivers/char/tty_io.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 502cad6..7053d63 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1026,19 +1026,19 @@ static inline ssize_t do_tty_write(
/* write_buf/write_cnt is protected by the atomic_write_lock mutex */
if (tty->write_cnt < chunk) {
- unsigned char *buf;
+ unsigned char *buf_chunk;
if (chunk < 1024)
chunk = 1024;
- buf = kmalloc(chunk, GFP_KERNEL);
- if (!buf) {
+ buf_chunk = kmalloc(chunk, GFP_KERNEL);
+ if (!buf_chunk) {
ret = -ENOMEM;
goto out;
}
kfree(tty->write_buf);
tty->write_cnt = chunk;
- tty->write_buf = buf;
+ tty->write_buf = buf_chunk;
}
/* Do the write .. */
Fixes #10783
Signed-off-by: Alan Cox <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 70a3719..c2ac129 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -860,7 +860,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
kfree(buf);
if (rv < 0) {
- err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+ dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
__func__,
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
@@ -2259,7 +2259,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
0, 0,
buf, 1, WDR_TIMEOUT);
if (ret < 0) {
- err("%s Could not get modem status of device - err: %d", __func__,
+ dbg("%s Could not get modem status of device - err: %d", __func__,
ret);
return ret;
}
@@ -2278,7 +2278,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
0, priv->interface,
buf, 2, WDR_TIMEOUT);
if (ret < 0) {
- err("%s Could not get modem status of device - err: %d", __func__,
+ dbg("%s Could not get modem status of device - err: %d", __func__,
ret);
return ret;
}
On Sun, Oct 05, 2008 at 05:11:38PM +0100, Alan Cox wrote:
> Use kref in the USB serial drivers so that we don't free tty structures
> from under the URB receive handlers as has historically been the case if
> you were unlucky. This also gives us a framework for general tty drivers to
> use tty_port objects and refcount.
Should we be calling kref_get() and kref_put() in interrupt context?
Could we just get the reference in open and then put in close when we
are done with it for each driver?
thanks,
greg k-h
On Sun, 5 Oct 2008, Alan Cox wrote:
> Many tty drivers contain 'can't happen' checks against NULL pointers passed
> in by the tty layer. These have never been possible to occur. Even more
> importantly if they ever do occur we want to know as it would be a serious
> bug.
> diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
> index ae377aa..c0a1df9 100644
> --- a/drivers/char/n_r3964.c
> +++ b/drivers/char/n_r3964.c
> @@ -372,15 +372,8 @@ static void remove_from_rx_queue(struct r3964_info *pInfo,
> static void put_char(struct r3964_info *pInfo, unsigned char ch)
> {
> struct tty_struct *tty = pInfo->tty;
> -
> - if (tty == NULL)
> - return;
> -
> /* FIXME: put_char should not be called from an IRQ */
> - if (tty->ops->put_char) {
> - tty->ops->put_char(tty, ch);
> - }
> - pInfo->bcc ^= ch;
^^^^^^^^^^^^^^^^
> + tty_put_char(tty, ch);
> }
I have no idea what this `bcc' thingy does, but its removal just struck
my eye...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Sun, Oct 05, 2008 at 10:36:58PM -0700, Greg KH wrote:
> Should we be calling kref_get() and kref_put() in interrupt context?
> Could we just get the reference in open and then put in close when we
> are done with it for each driver?
That depends how you handle hangups and interrupt synchronization. If you
can be sure you will get no more interrupts before you drop the reference
in close/hangup then yes that should be fine. In particular watch out for
the fact that hangup/close/re-open can run pretty much in parallel with
cases like
close called by user
interrupted by carrier drop causing hangup
in parallel another open begins and blocks waiting a close
(Obviously for hotplug some further care is needed on the unplug paths)
Right now USB serial doesn't actually address all those cases anyway I suspect.
I wasn't going to attack that until I had a common tty_port and tty_port code
to do all that work rather than trying to fix each group of drivers.
Alan
On Sun, Oct 05, 2008 at 05:08:15PM +0100, Alan Cox wrote:
> Introduce a kref to the tty structure and use it to protect the tty->signal
> tty references. For now we don't introduce it for anything else.
[...]
> diff --git a/kernel/fork.c b/kernel/fork.c
> index 7ce2ebe..30de644 100644
> --- a/kernel/fork.c
> +++ b/kernel/fork.c
> @@ -802,6 +802,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
>
> sig->leader = 0; /* session leadership doesn't inherit */
> sig->tty_old_pgrp = NULL;
> + sig->tty = NULL;
>
> sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
> sig->gtime = cputime_zero;
> @@ -838,6 +839,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
> void __cleanup_signal(struct signal_struct *sig)
> {
> exit_thread_group_keys(sig);
> + tty_kref_put(sig->tty);
> kmem_cache_free(signal_cachep, sig);
> }
>
> @@ -1227,7 +1229,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
> p->nsproxy->pid_ns->child_reaper = p;
>
> p->signal->leader_pid = pid;
> - p->signal->tty = current->signal->tty;
> + tty_kref_put(p->signal->tty);
> + p->signal->tty = tty_kref_get(current->signal->tty);
> set_task_pgrp(p, task_pgrp_nr(current));
> set_task_session(p, task_session_nr(current));
> attach_pid(p, PIDTYPE_PGID, task_pgrp(current));
I'm a bit puzzled by this 'tty_kref_put(p->signal->tty)'. AFAICS, this is a noop
since we are not in the CLONE_THREAD case and hence p->signal->tty == NULL.
So, is it to make the code look more consistent? If so, is it worth adding extra
code and cycles for this (I doubt that gcc is able to optimize this away)? What
kind of future changes should this code protect against?
Thanks,
Louis
--
Dr Louis Rilling Kerlabs
Skype: louis.rilling Batiment Germanium
Phone: (+33|0) 6 80 89 08 23 80 avenue des Buttes de Coesmes
http://www.kerlabs.com/ 35700 Rennes
On Sun, Oct 05, 2008 at 05:10:42PM +0100, Alan Cox wrote:
> We now return a kref covered tty reference. That ensures the tty structure
> doesn't go away when you have a return from get_current_tty. This is not
> enough to protect you from most of the resources being freed behind your
> back - yet.
>
> [Updated to include fixes for SELinux problems found by Andrew Morton and
> an s390 leak found while debugging the former]
>
[...]
> diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
> index d18e6d2..3ef5425 100644
> --- a/drivers/s390/char/fs3270.c
> +++ b/drivers/s390/char/fs3270.c
> @@ -430,11 +430,12 @@ fs3270_open(struct inode *inode, struct file *filp)
> mutex_lock(&tty_mutex);
> tty = get_current_tty();
> if (!tty || tty->driver->major != IBM_TTY3270_MAJOR) {
> - mutex_unlock(&tty_mutex);
> + tty_kref_put(tty);
Should'nt mutex_unlock() be kept?
Louis
> rc = -ENODEV;
> goto out;
> }
> minor = tty->index + RAW3270_FIRSTMINOR;
> + tty_kref_put(tty);
> mutex_unlock(&tty_mutex);
> }
> /* Check if some other program is already using fullscreen mode. */
--
Dr Louis Rilling Kerlabs
Skype: louis.rilling Batiment Germanium
Phone: (+33|0) 6 80 89 08 23 80 avenue des Buttes de Coesmes
http://www.kerlabs.com/ 35700 Rennes
> I have no idea what this `bcc' thingy does, but its removal just struck
> my eye...
Thanks - keeps a checksum byte per packet up to date if checksumming is
in use so having the right value is a good idea.
Fixed
On Mon, Oct 06, 2008 at 12:20:37PM +0200, Louis Rilling wrote:
>
> I'm a bit puzzled by this 'tty_kref_put(p->signal->tty)'. AFAICS, this is a noop
> since we are not in the CLONE_THREAD case and hence p->signal->tty == NULL.
When I first did it I was seeing non NULL values, but since then I've added
the initialisation
> So, is it to make the code look more consistent? If so, is it worth adding extra
> code and cycles for this (I doubt that gcc is able to optimize this away)? What
> kind of future changes should this code protect against?
I'll take a look, you may well be right, and if so it can become a WARN_ON()
instead.
On Mon, Oct 06, 2008 at 12:35:40PM +0200, Louis Rilling wrote:
> > tty = get_current_tty();
> > if (!tty || tty->driver->major != IBM_TTY3270_MAJOR) {
> > - mutex_unlock(&tty_mutex);
> > + tty_kref_put(tty);
>
> Should'nt mutex_unlock() be kept?
Yes.. although it gets fixed later but I will fix that as it will keep the
code bisectable.
On Sun, Oct 05, 2008 at 05:07:41PM +0100, Alan Cox wrote:
>From: David Miller <[email protected]>
>
>Otherwise the top 32-bits of the resource value get chopped
>off on 64-bit systems, and the resulting I/O accesses go to
>random places.
>
>Thanks to testing and debugging by Josip Rodin, which helped
>track this down.
>
>Signed-off-by: David S. Miller <[email protected]>
>Signed-off-by: Alan Cox <[email protected]>
>---
>
> include/linux/serial_core.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
>diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
>index 3b2f6c0..e27f216 100644
>--- a/include/linux/serial_core.h
>+++ b/include/linux/serial_core.h
>@@ -241,7 +241,7 @@ typedef unsigned int __bitwise__ upf_t;
>
> struct uart_port {
> spinlock_t lock; /* port lock */
>- unsigned int iobase; /* in/out[bwl] */
>+ unsigned long iobase; /* in/out[bwl] */
Does using resource_size_t make more sense here? There are
32-bit CPUs that have 64-bit address spaces. (Perhaps not
that use iobase, but it might be cleaner in general.)
josh
On Mon, Oct 06, 2008 at 05:02:46AM -0400, Alan Cox wrote:
> On Sun, Oct 05, 2008 at 10:36:58PM -0700, Greg KH wrote:
> > Should we be calling kref_get() and kref_put() in interrupt context?
> > Could we just get the reference in open and then put in close when we
> > are done with it for each driver?
>
> That depends how you handle hangups and interrupt synchronization. If you
> can be sure you will get no more interrupts before you drop the reference
> in close/hangup then yes that should be fine. In particular watch out for
> the fact that hangup/close/re-open can run pretty much in parallel with
> cases like
>
> close called by user
> interrupted by carrier drop causing hangup
>
> in parallel another open begins and blocks waiting a close
>
> (Obviously for hotplug some further care is needed on the unplug paths)
>
> Right now USB serial doesn't actually address all those cases anyway I suspect.
> I wasn't going to attack that until I had a common tty_port and tty_port code
> to do all that work rather than trying to fix each group of drivers.
Ok, fair enough, we can do further refinement later. All of these
changes look great to me, thanks for doing them. Feel free to put a:
Acked-by: Greg Kroah-Hartman <[email protected]>
on the usb-serial ones if you want it.
thanks,
greg k-h
On Sun, Oct 05, 2008 at 05:15:37PM +0100, Alan Cox wrote:
> diff --git a/include/linux/tty.h b/include/linux/tty.h
> index c30ed8d..e00393a 100644
> --- a/include/linux/tty.h
> +++ b/include/linux/tty.h
> @@ -361,6 +361,7 @@ extern int is_ignored(int sig);
> extern int tty_signal(int sig, struct tty_struct *tty);
> extern void tty_hangup(struct tty_struct *tty);
> extern void tty_vhangup(struct tty_struct *tty);
> +extern void tty_vhangup_self(void);
> extern void tty_unhangup(struct file *filp);
> extern int tty_hung_up_p(struct file *filp);
> extern void do_SAK(struct tty_struct *tty);
>From a pedantic pov shouldn't the above be part of patch 42 - where you
actually created tty_vhangup_self()?
DF