I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
I have tried kernels from 2.6.26 through 2.6.28.
I _can_ however boot these kernels when they are configured for HZ = 250. I
haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
indicated below in the dmesg output.
The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
While running a 2.6.26.8 kernel configured for HZ = 250:
/proc/version:
Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
[gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
16:37:58 EST 2009
scripts/ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
i386 GNU/Linux
Gnu C 4.3
Gnu make 3.81
binutils 11.0
2.18.50.20080409
11.1
util-linux 2.13.1
mount 2.13.1
module-init-tools 3.4
e2fsprogs 1.40.8
reiserfsprogs 3.6.19
PPP 2.4.4
Linux C Library 2.8
Dynamic linker (ldd) 2.8
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 6.11
udev 120
wireless-tools 29
Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
atiixp ide_core ahci pata_jmicron libata scsi_mod dock
/proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 3956.73
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6000.60
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6000.47
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6000.47
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
dmesg:
Initializing cgroup subsys cpuset
Linux version 2.6.26.8-lcrs (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat
Jan 17 16:37:58 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3264MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at [c00f3f00] 000f3f00
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 212992
HighMem 212992 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1632 pages used for memmap
Normal zone: 207264 pages, LIFO batch:31
HighMem zone: 6528 pages used for memmap
HighMem zone: 829056 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 38788 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3000.306 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
data, 216k init, 2293632k highmem)
virtual kernel memory layout:
fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
.init : 0xc0373000 - 0xc03a9000 ( 216 kB)
.data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
.text : 0xc0100000 - 0xc02b5336 (1748 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
The 2.6.26.8 kernel hangs up right here.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot option.
Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Processor model unknown stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 2
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Processor model unknown stepping 02
Booting processor 2/2 ip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 1
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Processor model unknown stepping 02
Booting processor 3/3 ip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Processor model unknown stepping 02
Brought up 4 CPUs
Total of 4 processors activated (21958.28 BogoMIPS).
net_namespace: 660 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 3
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
system 00:0d: iomem range 0x0-0x1fffff could not be reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: 0xf8000000-0xfbffffff
PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:04.0
IO window: c000-cfff
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: 0xfda00000-0xfdafffff
PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: 0xfde00000-0xfdefffff
PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: 0xfd900000-0xfd9fffff
PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 10039k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1232260163.932:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
bigphysarea: Allocated 16384 pages at 0xc3038000.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1462
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:b0a0
vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
logips2pp: Detected unknown logitech mouse model 11
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
Using IPI No-Shortcut mode
Freeing unused kernel memory: 216k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Driver 'sd' needs updating - please use bus_type methods
usbcore: registered new device driver usb
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3 < sda5<6>usb usb1: configuration #1 chosen from 1 choice
sda6<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sda7 sda8 sda9 sda10 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3 <<6>usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
sdb5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
sdb6<6>usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
sdb7<6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
sdb8<6>ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
sdb9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
sdb10 >
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
usb usb2: SerialNumber: 0000:00:13.5
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Photosmart 3200 series
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: MY5B98310Z045K
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2: New USB device found, idVendor=0424, idProduct=2504
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
Linux agpgart interface v0.103
eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 1, PHY: 4, PBA No: d50854-003
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ppdev: user-space parallel port driver
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
fline=0x0, cd=0x0, aux=0x0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
hda-intel: Invalid position buffer, using LPIB read method instead.
Using a 2.6.28 kernel the dmesg is slightly different and it seems to get a
little further. The last line on the screen is
Using C1E aware idle routine.
The BIOS on my MB doesn't recognize the processor type either BTW. At post it
says it an AMD processor type undefined.
Regards
Mark
Mark Hounschell wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>
The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
kernel. Sorry.
> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> /proc/version:
>
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
> 16:37:58 EST 2009
>
>
> scripts/ver_linux:
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
> i386 GNU/Linux
>
> Gnu C 4.3
> Gnu make 3.81
> binutils 11.0
> 2.18.50.20080409
> 11.1
> util-linux 2.13.1
> mount 2.13.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> reiserfsprogs 3.6.19
> PPP 2.4.4
> Linux C Library 2.8
> Dynamic linker (ldd) 2.8
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 6.11
> udev 120
> wireless-tools 29
> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 0
> cpu cores : 4
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 3956.73
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 2
> cpu cores : 4
> apicid : 2
> initial apicid : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.60
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 2
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 1
> cpu cores : 4
> apicid : 1
> initial apicid : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.47
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 3
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 3
> cpu cores : 4
> apicid : 3
> initial apicid : 3
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.47
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
>
> dmesg:
>
> Initializing cgroup subsys cpuset
> Linux version 2.6.26.8-lcrs (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat
> Jan 17 16:37:58 EST 2009
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Warning only 4GB will be used.
> Use a HIGHMEM64G enabled kernel.
> 3264MB HIGHMEM available.
> 832MB LOWMEM available.
> found SMP MP-table at [c00f3f00] 000f3f00
> Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 212992
> HighMem 212992 -> 1048576
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 1048576
> On node 0 totalpages: 1048576
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1632 pages used for memmap
> Normal zone: 207264 pages, LIFO batch:31
> HighMem zone: 6528 pages used for memmap
> HighMem zone: 829056 pages, LIFO batch:31
> Movable zone: 0 pages used for memmap
> DMI 2.5 present.
> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
> ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
> ACPI: FACS BFFE0000, 0040
> ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
> ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
> ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 38788 bytes of per cpu data
> NR_CPUS: 32, nr_cpu_ids: 4
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
> Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
> noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> Preemptible RCU implementation.
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 3000.306 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
> data, 216k init, 2293632k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>
>
> The 2.6.26.8 kernel hangs up right here.
>
>
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> Probably due to long platform interrupts. Consider using "lpj=" boot option.
> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
> Security Framework initialized
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0(4) -> Core 0
> Checking 'hlt' instruction... OK.
> ACPI: Core revision 20080321
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: AMD Processor model unknown stepping 02
> Booting processor 1/1 ip 2000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 1(4) -> Core 2
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: AMD Processor model unknown stepping 02
> Booting processor 2/2 ip 2000
> Initializing CPU#2
> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 2(4) -> Core 1
> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
> CPU2: AMD Processor model unknown stepping 02
> Booting processor 3/3 ip 2000
> Initializing CPU#3
> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 3(4) -> Core 3
> x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
> CPU3: AMD Processor model unknown stepping 02
> Brought up 4 CPUs
> Total of 4 processors activated (21958.28 BogoMIPS).
> net_namespace: 660 bytes
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in E820
> PCI: Using MMCONFIG for extended config space
> PCI: Using configuration type 1 for base access
> Setting up standard PCI resources
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:12.0: set SATA to AHCI mode
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp: PnP ACPI: found 14 devices
> ACPI: ACPI bus type pnp unregistered
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: Cannot allocate resource region 3 of device 0000:00:00.0
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 32-bit timers, 14318180 Hz
> ACPI: RTC can wake from S4
> Switched to high resolution mode on CPU 0
> Switched to high resolution mode on CPU 2
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 3
> system 00:01: ioport range 0x4100-0x411f has been reserved
> system 00:01: ioport range 0x228-0x22f has been reserved
> system 00:01: ioport range 0x40b-0x40b has been reserved
> system 00:01: ioport range 0x4d6-0x4d6 has been reserved
> system 00:01: ioport range 0xc00-0xc01 has been reserved
> system 00:01: ioport range 0xc14-0xc14 has been reserved
> system 00:01: ioport range 0xc50-0xc52 has been reserved
> system 00:01: ioport range 0xc6c-0xc6d has been reserved
> system 00:01: ioport range 0xc6f-0xc6f has been reserved
> system 00:01: ioport range 0xcd0-0xcd1 has been reserved
> system 00:01: ioport range 0xcd2-0xcd3 has been reserved
> system 00:01: ioport range 0xcd4-0xcdf has been reserved
> system 00:01: ioport range 0x4000-0x40fe has been reserved
> system 00:01: ioport range 0x4210-0x4217 has been reserved
> system 00:01: ioport range 0xb10-0xb1f has been reserved
> system 00:07: ioport range 0x4d0-0x4d1 has been reserved
> system 00:07: ioport range 0x220-0x225 has been reserved
> system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
> system 00:0d: iomem range 0x0-0x1fffff could not be reserved
> system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
> system 00:0d: iomem range 0x0-0x9ffff could not be reserved
> system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
> PCI: Bridge: 0000:00:02.0
> IO window: d000-dfff
> MEM window: 0xf8000000-0xfbffffff
> PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
> PCI: Bridge: 0000:00:04.0
> IO window: c000-cfff
> MEM window: 0xfdc00000-0xfdcfffff
> PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
> PCI: Bridge: 0000:00:06.0
> IO window: b000-bfff
> MEM window: 0xfda00000-0xfdafffff
> PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
> PCI: Bridge: 0000:00:07.0
> IO window: e000-efff
> MEM window: 0xfde00000-0xfdefffff
> PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
> PCI: Bridge: 0000:00:14.4
> IO window: a000-afff
> MEM window: 0xfd900000-0xfd9fffff
> PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Unpacking initramfs... done
> Freeing initrd memory: 10039k freed
> audit: initializing netlink socket (disabled)
> type=2000 audit(1232260163.932:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> bigphysarea: Allocated 16384 pages at 0xc3038000.
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> msgmni has been set to 1462
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:01:00.0: Boot video device
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:04.0:pcie00]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:07.0:pcie00]
> vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
> vesafb: mode is 1024x768x16, linelength=2048, pages=1
> vesafb: protected mode interface info at c000:b0a0
> vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
> vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
> 3d1 3d2 3d3 3d4 3d5 3da
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> hpet_resources: 0xfed00000 is busy
> Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: PC Speaker as /class/input/input1
> logips2pp: Detected unknown logitech mouse model 11
> input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
> Using IPI No-Shortcut mode
> Freeing unused kernel memory: 216k freed
> No dock devices found.
> SCSI subsystem initialized
> libata version 3.00 loaded.
> pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
> ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:03:00.1 to 64
> scsi0 : pata_jmicron
> scsi1 : pata_jmicron
> ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
> ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
> ahci 0000:00:12.0: version 3.0
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
> ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
> ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
> ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
> ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
> ata3: softreset failed (device not ready)
> ata3: failed due to HW bug, retry pmp=0
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: configured for UDMA/133
> ata4: softreset failed (device not ready)
> ata4: failed due to HW bug, retry pmp=0
> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata4.00: configured for UDMA/133
> ata5: softreset failed (device not ready)
> ata5: failed due to HW bug, retry pmp=0
> ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata5.00: configured for UDMA/133
> ata6: SATA link down (SStatus 0 SControl 300)
> scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> scsi6 : ahci
> scsi7 : ahci
> ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
> ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
> ata7: SATA link down (SStatus 0 SControl 300)
> ata8: SATA link down (SStatus 0 SControl 300)
> Uniform Multi-Platform E-IDE driver
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> SB600_PATA: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf900-0xf907
> Probing IDE interface ide0...
> hda: ST3120023A, ATA DISK drive
> hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdb: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
> scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
> <Adaptec 2930CU SCSI adapter>
> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
>
> BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
> sky2 eth0: addr 00:e0:4d:7a:8c:ee
> Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
> Copyright (c) 1999-2006 Intel Corporation.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> Driver 'sd' needs updating - please use bus_type methods
> usbcore: registered new device driver usb
> sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
> sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sda: sda1 sda2 sda3 < sda5<6>usb usb1: configuration #1 chosen from 1 choice
> sda6<6>hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> sda7 sda8 sda9 sda10 >
> sd 2:0:0:0: [sda] Attached SCSI disk
> sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sdb: sdb1 sdb2 sdb3 <<6>usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> sdb5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: OHCI Host Controller
> sdb6<6>usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb1: SerialNumber: 0000:00:13.0
> sdb7<6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:13.5: EHCI Host Controller
> ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
> sdb8<6>ehci_hcd 0000:00:13.5: debug port 1
> ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
> sdb9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb2: configuration #1 chosen from 1 choice
> sdb10 >
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 10 ports detected
> sd 3:0:0:0: [sdb] Attached SCSI disk
> sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 4:0:0:0: [sdc] Write Protect is off
> sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 4:0:0:0: [sdc] Write Protect is off
> sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sdc: sdc1
> sd 4:0:0:0: [sdc] Attached SCSI disk
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
> usb usb2: SerialNumber: 0000:00:13.5
> ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb3: SerialNumber: 0000:00:13.1
> ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
> ohci_hcd 0000:00:13.2: OHCI Host Controller
> ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 2-1: new high speed USB device using ehci_hcd and address 2
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: OHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb4: SerialNumber: 0000:00:13.2
> ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.3: OHCI Host Controller
> ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
> ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
> usb 2-1: configuration #1 chosen from 1 choice
> usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-1: Product: Photosmart 3200 series
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> usb 2-1: Manufacturer: HP
> usb 2-1: SerialNumber: MY5B98310Z045K
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: OHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb5: SerialNumber: 0000:00:13.3
> ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
> ohci_hcd 0000:00:13.4: OHCI Host Controller
> ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
> ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> usb 2-2: new high speed USB device using ehci_hcd and address 3
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: OHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb6: SerialNumber: 0000:00:13.4
> usb 2-2: configuration #1 chosen from 1 choice
> hub 2-2:1.0: USB hub found
> hub 2-2:1.0: 4 ports detected
> usb 2-2: New USB device found, idVendor=0424, idProduct=2504
> usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> sd 2:0:0:0: Attached scsi generic sg0 type 0
> sd 3:0:0:0: Attached scsi generic sg1 type 0
> sd 4:0:0:0: Attached scsi generic sg2 type 0
> hda: max request size: 128KiB
> hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
> hda: cache flushes supported
> hda: hda1
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> Linux agpgart interface v0.103
> eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
> eth1: Intel(R) PRO/1000 Network Connection
> eth1: MAC: 1, PHY: 4, PBA No: d50854-003
> usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
> usbcore: registered new interface driver usblp
> Initializing USB Mass Storage driver...
> scsi9 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> IT8718 SuperIO detected.
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month
> ppdev: user-space parallel port driver
> nvidia: module license 'NVIDIA' taints kernel.
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
> (0x14/0x15/0x16/0x17/0x0)
> ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
> ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
> fline=0x0, cd=0x0, aux=0x0
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:01:00.0 to 64
> NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
> Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
> scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
> sd 9:0:0:0: [sdd] Attached SCSI removable disk
> sd 9:0:0:0: Attached scsi generic sg3 type 0
> usb-storage: device scan complete
> loop: module loaded
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda9, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda10, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sdc1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> fuse init (API version 7.9)
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> sky2 eth0: enabling interface
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> eth0: no IPv6 routers present
> NET: Registered protocol family 4
> NET: Registered protocol family 3
> NET: Registered protocol family 5
> hda-intel: Invalid position buffer, using LPIB read method instead.
>
>
>
>
> Using a 2.6.28 kernel the dmesg is slightly different and it seems to get a
> little further. The last line on the screen is
>
> Using C1E aware idle routine.
>
> The BIOS on my MB doesn't recognize the processor type either BTW. At post it
> says it an AMD processor type undefined.
>
> Regards
> Mark
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
On Monday 19 January 2009, Mark Hounschell wrote:
> Mark Hounschell wrote:
> > I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
> >
> > I have tried kernels from 2.6.26 through 2.6.28.
> >
> > I _can_ however boot these kernels when they are configured for HZ = 250. I
> > haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> > indicated below in the dmesg output.
> >
> > The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
> >
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
> kernel. Sorry.
>
> > While running a 2.6.26.8 kernel configured for HZ = 250:
[...]
> > Checking if this processor honours the WP bit even in supervisor mode...Ok.
> >
> >
> > The 2.6.26.8 kernel hangs up right here.
> >
> >
> > CPA: page pool initialized 1 of 1 pages preallocated
> > SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > hpet clockevent registered
> > calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> > Probably due to long platform interrupts. Consider using "lpj=" boot option.
> > Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
Even if it boots it may not work reliably since lpj/BogoMIPS are too small
(they should be the same as for other CPUs) which in turn could result in too
short delay loops.
> > Security Framework initialized
> > Capability LSM initialized
> > Mount-cache hash table entries: 512
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU 0(4) -> Core 0
> > Checking 'hlt' instruction... OK.
> > ACPI: Core revision 20080321
> > ENABLING IO-APIC IRQs
> > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> > CPU0: AMD Processor model unknown stepping 02
> > Booting processor 1/1 ip 2000
> > Initializing CPU#1
> > Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
Here are the proper values.
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU 1(4) -> Core 2
> > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> > CPU1: AMD Processor model unknown stepping 02
> > Booting processor 2/2 ip 2000
> > Initializing CPU#2
> > Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
also OK
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU 2(4) -> Core 1
> > x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
> > CPU2: AMD Processor model unknown stepping 02
> > Booting processor 3/3 ip 2000
> > Initializing CPU#3
> > Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
ditto
That being said I don't know why delay calibration loop fails on CPU0.
You may try booting with "lpj=12001200" kernel parameter to workaround
the issue (it should fix booting with HZ == 1000) and/or try 2.6.29-rc2
(the problem may have been already fixed).
Thanks,
Bart
Hi,
On Sun, Jan 18, 2009 at 07:38:36AM -0500, Mark Hounschell wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>
> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> /proc/version:
>
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
> 16:37:58 EST 2009
>
>
> scripts/ver_linux:
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
> i386 GNU/Linux
>
> Gnu C 4.3
> Gnu make 3.81
> binutils 11.0
> 2.18.50.20080409
> 11.1
> util-linux 2.13.1
> mount 2.13.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> reiserfsprogs 3.6.19
> PPP 2.4.4
> Linux C Library 2.8
> Dynamic linker (ldd) 2.8
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 6.11
> udev 120
> wireless-tools 29
> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
judging from the processor name string it looks like your BIOS doesn't
program the processor name properly which could mean that you need
to check whether your motherboard supports Phenom II CPUs and if so,
upgrade your BIOS. This could also explain the mis-calibration issue.
Also, is this a 32-bit kernel you're booting?
[.. ]
--
Regards/Gruss,
Boris.
Advanced Micro Devices, Inc.
Operating System Research Center
Borislav Petkov wrote:
> Hi,
>
> On Sun, Jan 18, 2009 at 07:38:36AM -0500, Mark Hounschell wrote:
>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>
>> I have tried kernels from 2.6.26 through 2.6.28.
>>
>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>> indicated below in the dmesg output.
>>
>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>
>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>
>> /proc/version:
>>
>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
>> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
>> 16:37:58 EST 2009
>>
>>
>> scripts/ver_linux:
>>
>> If some fields are empty or look unusual you may have an old version.
>> Compare to the current minimal requirements in Documentation/Changes.
>>
>> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
>> i386 GNU/Linux
>>
>> Gnu C 4.3
>> Gnu make 3.81
>> binutils 11.0
>> 2.18.50.20080409
>> 11.1
>> util-linux 2.13.1
>> mount 2.13.1
>> module-init-tools 3.4
>> e2fsprogs 1.40.8
>> reiserfsprogs 3.6.19
>> PPP 2.4.4
>> Linux C Library 2.8
>> Dynamic linker (ldd) 2.8
>> Procps 3.2.7
>> Net-tools 1.60
>> Kbd 1.12
>> Sh-utils 6.11
>> udev 120
>> wireless-tools 29
>> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
>> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
>> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
>> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
>> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
>> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
>> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
>> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
>> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
>> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>>
>>
>> /proc/cpuinfo:
>>
>> processor : 0
>> vendor_id : AuthenticAMD
>> cpu family : 16
>> model : 4
>> model name : AMD Processor model unknown
>
> judging from the processor name string it looks like your BIOS doesn't
> program the processor name properly which could mean that you need
> to check whether your motherboard supports Phenom II CPUs and if so,
> upgrade your BIOS. This could also explain the mis-calibration issue.
>
> Also, is this a 32-bit kernel you're booting?
>
Yes, I am running 32 bit kernels. Also as I stated in my original post the MB
does report "AMD Processor model unknown" at post. I assume a BIOS update
will be forth coming. Actually when the Phonom-I was installed it was an upgrade
(well it turned out to be a downgrade) from an AMD X2 6400+. The BIOS at that
time reported the same thing until there was a BIOS update for it. Also FWIW,
at that time I was able to boot a HZ=1000 kernel. Don't remember looking at the
lpj values though.
Regards
Mark
Bartlomiej Zolnierkiewicz wrote:
> On Monday 19 January 2009, Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>
>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>
>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>> indicated below in the dmesg output.
>>>
>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>
>> The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
>> kernel. Sorry.
>>
>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> [...]
>
>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>
>>>
>>> The 2.6.26.8 kernel hangs up right here.
>>>
>>>
>>> CPA: page pool initialized 1 of 1 pages preallocated
>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>> hpet clockevent registered
>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>> Probably due to long platform interrupts. Consider using "lpj=" boot option.
>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>
> Even if it boots it may not work reliably since lpj/BogoMIPS are too small
> (they should be the same as for other CPUs) which in turn could result in too
> short delay loops.
>
>>> Security Framework initialized
>>> Capability LSM initialized
>>> Mount-cache hash table entries: 512
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU 0(4) -> Core 0
>>> Checking 'hlt' instruction... OK.
>>> ACPI: Core revision 20080321
>>> ENABLING IO-APIC IRQs
>>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> CPU0: AMD Processor model unknown stepping 02
>>> Booting processor 1/1 ip 2000
>>> Initializing CPU#1
>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>
> Here are the proper values.
>
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU 1(4) -> Core 2
>>> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>>> CPU1: AMD Processor model unknown stepping 02
>>> Booting processor 2/2 ip 2000
>>> Initializing CPU#2
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>
> also OK
>
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU 2(4) -> Core 1
>>> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>>> CPU2: AMD Processor model unknown stepping 02
>>> Booting processor 3/3 ip 2000
>>> Initializing CPU#3
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
>
> ditto
>
> That being said I don't know why delay calibration loop fails on CPU0.
>
> You may try booting with "lpj=12001200" kernel parameter to workaround
> the issue (it should fix booting with HZ == 1000) and/or try 2.6.29-rc2
> (the problem may have been already fixed).
>
> Thanks,
> Bart
>
I'll try "lpj=12001200" and 2.6.29-rc2 later when I get home this ev.
But I noticed CPU2 is different too. Is CPU1 the correct one?
>>> Initializing CPU#0
>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>>> Initializing CPU#1
>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>>> Initializing CPU#2
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>>> Initializing CPU#3
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
Mark
Mark Hounschell wrote:
> Bartlomiej Zolnierkiewicz wrote:
>> On Monday 19 January 2009, Mark Hounschell wrote:
>>> Mark Hounschell wrote:
>>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>>
>>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>>
>>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>>> indicated below in the dmesg output.
>>>>
>>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>>
>>> The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
>>> kernel. Sorry.
>>>
>>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>> [...]
>>
>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>>
>>>>
>>>> The 2.6.26.8 kernel hangs up right here.
>>>>
>>>>
>>>> CPA: page pool initialized 1 of 1 pages preallocated
>>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>> hpet clockevent registered
>>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>>> Probably due to long platform interrupts. Consider using "lpj=" boot option.
>>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>> Even if it boots it may not work reliably since lpj/BogoMIPS are too small
>> (they should be the same as for other CPUs) which in turn could result in too
>> short delay loops.
>>
>>>> Security Framework initialized
>>>> Capability LSM initialized
>>>> Mount-cache hash table entries: 512
>>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>>> CPU: L2 Cache: 512K (64 bytes/line)
>>>> CPU 0(4) -> Core 0
>>>> Checking 'hlt' instruction... OK.
>>>> ACPI: Core revision 20080321
>>>> ENABLING IO-APIC IRQs
>>>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>>>> CPU0: AMD Processor model unknown stepping 02
>>>> Booting processor 1/1 ip 2000
>>>> Initializing CPU#1
>>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>> Here are the proper values.
>>
>>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>>> CPU: L2 Cache: 512K (64 bytes/line)
>>>> CPU 1(4) -> Core 2
>>>> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>>>> CPU1: AMD Processor model unknown stepping 02
>>>> Booting processor 2/2 ip 2000
>>>> Initializing CPU#2
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>> also OK
>>
>>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>>> CPU: L2 Cache: 512K (64 bytes/line)
>>>> CPU 2(4) -> Core 1
>>>> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>>>> CPU2: AMD Processor model unknown stepping 02
>>>> Booting processor 3/3 ip 2000
>>>> Initializing CPU#3
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
>> ditto
>>
>> That being said I don't know why delay calibration loop fails on CPU0.
>>
>> You may try booting with "lpj=12001200" kernel parameter to workaround
>> the issue (it should fix booting with HZ == 1000) and/or try 2.6.29-rc2
>> (the problem may have been already fixed).
>>
>> Thanks,
>> Bart
>>
>
> I'll try "lpj=12001200" and 2.6.29-rc2 later when I get home this ev.
>
> But I noticed CPU2 is different too. Is CPU1 the correct one?
>
>>>> Initializing CPU#0
>>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>
>>>> Initializing CPU#1
>>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>
>>>> Initializing CPU#2
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>
>>>> Initializing CPU#3
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
>
None of the lpj values made any difference. 2.6.29-rc2 did print a couple more
messages. The last one was
Using C1E aware idle routine
Checking 'hlt' in
Surely I can't be the only Linux user with this processor???
Regards
Mark
Mark Hounschell wrote:
> Borislav Petkov wrote:
>> Hi,
>>
>> On Sun, Jan 18, 2009 at 07:38:36AM -0500, Mark Hounschell wrote:
>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>
>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>
>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>> indicated below in the dmesg output.
>>>
>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>
>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>>
>>> /proc/version:
>>>
>>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
>>> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
>>> 16:37:58 EST 2009
>>>
>>>
>>> scripts/ver_linux:
>>>
>>> If some fields are empty or look unusual you may have an old version.
>>> Compare to the current minimal requirements in Documentation/Changes.
>>>
>>> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
>>> i386 GNU/Linux
>>>
>>> Gnu C 4.3
>>> Gnu make 3.81
>>> binutils 11.0
>>> 2.18.50.20080409
>>> 11.1
>>> util-linux 2.13.1
>>> mount 2.13.1
>>> module-init-tools 3.4
>>> e2fsprogs 1.40.8
>>> reiserfsprogs 3.6.19
>>> PPP 2.4.4
>>> Linux C Library 2.8
>>> Dynamic linker (ldd) 2.8
>>> Procps 3.2.7
>>> Net-tools 1.60
>>> Kbd 1.12
>>> Sh-utils 6.11
>>> udev 120
>>> wireless-tools 29
>>> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
>>> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
>>> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
>>> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
>>> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
>>> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
>>> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
>>> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
>>> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
>>> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>>>
>>>
>>> /proc/cpuinfo:
>>>
>>> processor : 0
>>> vendor_id : AuthenticAMD
>>> cpu family : 16
>>> model : 4
>>> model name : AMD Processor model unknown
>> judging from the processor name string it looks like your BIOS doesn't
>> program the processor name properly which could mean that you need
>> to check whether your motherboard supports Phenom II CPUs and if so,
>> upgrade your BIOS. This could also explain the mis-calibration issue.
>>
>> Also, is this a 32-bit kernel you're booting?
>>
>
> Yes, I am running 32 bit kernels. Also as I stated in my original post the MB
> does report "AMD Processor model unknown" at post. I assume a BIOS update
> will be forth coming. Actually when the Phonom-I was installed it was an upgrade
> (well it turned out to be a downgrade) from an AMD X2 6400+. The BIOS at that
> time reported the same thing until there was a BIOS update for it. Also FWIW,
> at that time I was able to boot a HZ=1000 kernel. Don't remember looking at the
> lpj values though.
>
I'm waiting for a response from the MFGR, but I doubt I will actually hear from
them. Like I said above, the Phenom-I worked (or at least seemed to) before they
provided a BIOS update for it.
Somehow I don't think "the boot issue" is a mis-calibration issue. As it boots
now with a 250Hz kernel, it is still mis-calibrated for cpu0, but still boots.
Initializing CPU#0
Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
Regards
Mark
On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <[email protected]> wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>
> While running a 2.6.26.8 kernel configured for HZ = 250:
[snip]
> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>
>
> The 2.6.26.8 kernel hangs up right here.
>
>
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
This looks suspect. Probably something is off with the timer
interrupt, that's causing the calibration to be way off.
Does booting with hpet=disable change anything?
thanks
-john
john stultz wrote:
> On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <[email protected]> wrote:
>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>
>> I have tried kernels from 2.6.26 through 2.6.28.
>>
>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>> indicated below in the dmesg output.
>>
>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>
>> While running a 2.6.26.8 kernel configured for HZ = 250:
> [snip]
>> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
>> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
>> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>
>>
>> The 2.6.26.8 kernel hangs up right here.
>>
>>
>> CPA: page pool initialized 1 of 1 pages preallocated
>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> hpet clockevent registered
>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>
> This looks suspect. Probably something is off with the timer
> interrupt, that's causing the calibration to be way off.
>
> Does booting with hpet=disable change anything?
>
> thanks
> -john
John,
I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
thanks
Mark
On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
> john stultz wrote:
> > On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <[email protected]> wrote:
> >> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
> >>
> >> I have tried kernels from 2.6.26 through 2.6.28.
> >>
> >> I _can_ however boot these kernels when they are configured for HZ = 250. I
> >> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> >> indicated below in the dmesg output.
> >>
> >> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
> >>
> >> While running a 2.6.26.8 kernel configured for HZ = 250:
> > [snip]
> >> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> >> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> >> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> >> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> >> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> >> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> >>
> >>
> >> The 2.6.26.8 kernel hangs up right here.
> >>
> >>
> >> CPA: page pool initialized 1 of 1 pages preallocated
> >> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> >> hpet clockevent registered
> >> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> >
> > This looks suspect. Probably something is off with the timer
> > interrupt, that's causing the calibration to be way off.
> >
> > Does booting with hpet=disable change anything?
> >
> > thanks
> > -john
>
> John,
>
> I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
Hi Mark,
I just want to second what Boris already stated.
Obviously your BIOS doesn't properly initialize your CPU.
Your BIOS programs the processor name string as
"AMD Processor model unknown"
I would have expected to see something like "AMD Phenom(tm) II X4"
This shows that the BIOS doesn't know your CPU model and it is an
indication that your CPU is not correctly initialized. Phenom II is a
different CPU model than Phenom and several configuration bits
(e.g. MSRs, CPU config space) need different settings from BIOS
or they even were reserved in previous family 10h CPU models.
IMHO it is a waste of time to try to debug/fix your problem from OS.
First you should update your BIOS. You need to check the "CPU
support"-information from your motherboard vendor to see whether your
motherboard supports Phenom II and which BIOS is required.
If you know that your BIOS/motherboard are supposed to support Phenom II
and the problem persists then it is a different game and we should
definitely look into your problem.
So what's your BIOS version and motherboard vendor/model?
(And output of dmidecode would be helpful.)
Regards,
Andreas
Andreas Herrmann wrote:
> On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
>> john stultz wrote:
>>> On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <[email protected]> wrote:
>>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>>
>>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>>
>>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>>> indicated below in the dmesg output.
>>>>
>>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>>
>>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>> [snip]
>>>> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
>>>> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
>>>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>>>> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
>>>> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>>
>>>>
>>>> The 2.6.26.8 kernel hangs up right here.
>>>>
>>>>
>>>> CPA: page pool initialized 1 of 1 pages preallocated
>>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>> hpet clockevent registered
>>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>> This looks suspect. Probably something is off with the timer
>>> interrupt, that's causing the calibration to be way off.
>>>
>>> Does booting with hpet=disable change anything?
>>>
>>> thanks
>>> -john
>> John,
>>
>> I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
>
> Hi Mark,
>
> I just want to second what Boris already stated.
> Obviously your BIOS doesn't properly initialize your CPU.
>
> Your BIOS programs the processor name string as
> "AMD Processor model unknown"
>
> I would have expected to see something like "AMD Phenom(tm) II X4"
>
> This shows that the BIOS doesn't know your CPU model and it is an
> indication that your CPU is not correctly initialized. Phenom II is a
> different CPU model than Phenom and several configuration bits
> (e.g. MSRs, CPU config space) need different settings from BIOS
> or they even were reserved in previous family 10h CPU models.
>
> IMHO it is a waste of time to try to debug/fix your problem from OS.
> First you should update your BIOS. You need to check the "CPU
> support"-information from your motherboard vendor to see whether your
> motherboard supports Phenom II and which BIOS is required.
>
Understood and agreed with.
> If you know that your BIOS/motherboard are supposed to support Phenom II
> and the problem persists then it is a different game and we should
> definitely look into your problem.
>
> So what's your BIOS version and motherboard vendor/model?
> (And output of dmidecode would be helpful.)
>
>
The MB is a Biostar TA770+. It is not yet listed as one with new
BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
The only difference in the Sata port arrangement and the BIOS type.
I guess I'll just keep pinging them.
Regards
Mark
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
>>> john stultz wrote:
>>>> On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <[email protected]> wrote:
>>>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>>>
>>>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>>>
>>>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>>>> indicated below in the dmesg output.
>>>>>
>>>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>>>
>>>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>>> [snip]
>>>>> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
>>>>> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
>>>>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>>>>> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
>>>>> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
>>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>>>
>>>>>
>>>>> The 2.6.26.8 kernel hangs up right here.
>>>>>
>>>>>
>>>>> CPA: page pool initialized 1 of 1 pages preallocated
>>>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>>> hpet clockevent registered
>>>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>>> This looks suspect. Probably something is off with the timer
>>>> interrupt, that's causing the calibration to be way off.
>>>>
>>>> Does booting with hpet=disable change anything?
>>>>
>>>> thanks
>>>> -john
>>> John,
>>>
>>> I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
>> Hi Mark,
>>
>> I just want to second what Boris already stated.
>> Obviously your BIOS doesn't properly initialize your CPU.
>>
>> Your BIOS programs the processor name string as
>> "AMD Processor model unknown"
>>
>> I would have expected to see something like "AMD Phenom(tm) II X4"
>>
>> This shows that the BIOS doesn't know your CPU model and it is an
>> indication that your CPU is not correctly initialized. Phenom II is a
>> different CPU model than Phenom and several configuration bits
>> (e.g. MSRs, CPU config space) need different settings from BIOS
>> or they even were reserved in previous family 10h CPU models.
>>
>> IMHO it is a waste of time to try to debug/fix your problem from OS.
>> First you should update your BIOS. You need to check the "CPU
>> support"-information from your motherboard vendor to see whether your
>> motherboard supports Phenom II and which BIOS is required.
>>
>
> Understood and agreed with.
>
>> If you know that your BIOS/motherboard are supposed to support Phenom II
>> and the problem persists then it is a different game and we should
>> definitely look into your problem.
>>
>> So what's your BIOS version and motherboard vendor/model?
>> (And output of dmidecode would be helpful.)
>>
>>
>
> The MB is a Biostar TA770+. It is not yet listed as one with new
> BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
> The only difference in the Sata port arrangement and the BIOS type.
>
> I guess I'll just keep pinging them.
>
> Regards
> Mark
>
OK I have now the official bios for this CPU/MB combo. I still cannot boot a
1000 HZ kernel. Here is my new dmesg while running a 250Hz kernel.
Initializing cgroup subsys cpuset
Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
[gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
16:37:58 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3264MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at [c00f3f00] 000f3f00
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 212992
HighMem 212992 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1632 pages used for memmap
Normal zone: 207264 pages, LIFO batch:31
HighMem zone: 6528 pages used for memmap
HighMem zone: 829056 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 38788 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3000.279 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
data, 216k init, 2293632k highmem)
virtual kernel memory layout:
fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
.init : 0xc0373000 - 0xc03a9000 ( 216 kB)
.data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
.text : 0xc0100000 - 0xc02b5336 (1748 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot option.
Calibrating delay loop... 3948.54 BogoMIPS (lpj=7897088)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.48 BogoMIPS (lpj=12000961)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
Booting processor 2/2 ip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.48 BogoMIPS (lpj=12000966)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 2
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
Booting processor 3/3 ip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.48 BogoMIPS (lpj=12000974)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
Brought up 4 CPUs
Total of 4 processors activated (21949.99 BogoMIPS).
net_namespace: 660 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
system 00:0d: iomem range 0x0-0x1fffff could not be reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: 0xf8000000-0xfbffffff
PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:04.0
IO window: c000-cfff
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: 0xfda00000-0xfdafffff
PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: 0xfde00000-0xfdefffff
PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: 0xfd900000-0xfd9fffff
PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 10039k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1232684854.924:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
bigphysarea: Allocated 16384 pages at 0xc3038000.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1462
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:b0a0
vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
logips2pp: Detected unknown logitech mouse model 11
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
Using IPI No-Shortcut mode
Freeing unused kernel memory: 216k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
scsi 8:0:0:0: Direct-Access SEAGATE ST15150N 5052 PQ: 0 ANSI: 2
scsi8:A:0:0: Tagged Queuing enabled. Depth 32
target8:0:0: Beginning Domain Validation
target8:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target8:0:0: Domain Validation skipping write tests
target8:0:0: Ending Domain Validation
scsi 8:0:2:0: Sequential-Access ARCHIVE Python 01931-XXX 5.63 PQ: 0 ANSI: 2
target8:0:2: Beginning Domain Validation
target8:0:2: FAST-10 SCSI 7.8 MB/s ST (128 ns, offset 15)
target8:0:2: Domain Validation skipping write tests
target8:0:2: Ending Domain Validation
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda:<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
sda1 sda2 sda3 <<6>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus
number 1
sda5<6>ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
sda6<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
sda7<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
sda8<6>hub 1-0:1.0: USB hub found
sda9<6>hub 1-0:1.0: 10 ports detected
sda10 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7<6>usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sdb8<6>usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
sdb9<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
sdb10 >
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 8:0:0:0: [sdd] Unsupported sector size 768.
sd 8:0:0:0: [sdd] 0 512-byte hardware sectors (0 MB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: ab 00 10 08
sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 8:0:0:0: [sdd] Attached SCSI disk
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=03f0, idProduct=5111
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Photosmart 3200 series
usb 1-1: Manufacturer: HP
usb 1-1: SerialNumber: MY5B98310Z045K
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb usb4: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb 1-2: New USB device found, idVendor=0424, idProduct=2504
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: Attached scsi generic sg3 type 0
scsi 8:0:2:0: Attached scsi generic sg4 type 1
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
Linux agpgart interface v0.103
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
st 8:0:2:0: Attached scsi tape st0
st 8:0:2:0: st0: try direct i/o: yes (alignment 4 B)
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 1, PHY: 4, PBA No: d50854-003
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
ppdev: user-space parallel port driver
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.1.1.1 2009/01/04 11:41:44 markh Exp $
Driver 'osst' needs updating - please use bus_type methods
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
nvidia: module license 'NVIDIA' taints kernel.
st0: Block limits 1 - 16777215 bytes.
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
fline=0x0, cd=0x0, aux=0x0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sde] Attached SCSI removable disk
fuse init (API version 7.9)
sd 9:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
hda-intel: Invalid position buffer, using LPIB read method instead.
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
Regards
Mark
On Fri, Jan 23, 2009 at 10:34:43AM +0100, Mark Hounschell wrote:
> Mark Hounschell wrote:
> > The MB is a Biostar TA770+. It is not yet listed as one with new
> > BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
> > The only difference in the Sata port arrangement and the BIOS type.
> >
> > I guess I'll just keep pinging them.
>
> OK I have now the official bios for this CPU/MB combo. I still cannot boot a
> 1000 HZ kernel.
Looking at the Biostar pages I am still not completely convinced that
your CPU/MB combo is supported. At least it is not listed there.
So far TA770 A2+ SE, rev. 6.X, is listed. Did the Biostar folks confirm you
that your mobo model/revision is supported, too?
> Here is my new dmesg while running a 250Hz kernel.
...
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
...
> CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
...
> CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
...
> CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
...
> CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
Looks good so far.
> eth0: no IPv6 routers present
> warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
> hda-intel: Invalid position buffer, using LPIB read method instead.
> NET: Registered protocol family 4
> NET: Registered protocol family 3
> NET: Registered protocol family 5
This reminds me of some system hangs with older kernels when C1E was
activated.
Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
when using 2.6.26.X?
Can you also try to boot .27 or .28?
Thanks,
Andreas
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. M?nchen, Germany
Research | Gesch?ftsf?hrer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis M?nchen
(OSRC) | Registergericht M?nchen, HRB Nr. 43632
Hi,
[.. ]
> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
> when using 2.6.26.X?
> Can you also try to boot .27 or .28?
Also, can you send me the output of dmidecode please?
Thanks.
--
Regards/Gruss,
Boris.
Advanced Micro Devices, Inc.
Operating System Research Center
Borislav Petkov wrote:
> Hi,
>
> [.. ]
>
>> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
>> when using 2.6.26.X?
>> Can you also try to boot .27 or .28?
>
> Also, can you send me the output of dmidecode please?
>
> Thanks.
>
Yes, here it is.
# dmidecode 2.9
SMBIOS 2.5 present.
54 structures occupying 2295 bytes.
Table at 0x000F0000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 12/25/2008
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: BIOSTAR Group
Product Name: A78XA-A2T
Version: 1.0
Serial Number: Unknow
UUID: Not Present
Wake-up Type: Power Switch
SKU Number:
Family:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: BIOSTAR Group
Product Name: TA770 A2+
Version: 1.0
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: BIOSTAR Group
Type: Desktop
Lock: Not Present
Version: A78XA-A2T
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: Socket AM2
Type: Central Processor
Family: 80287
Manufacturer: AMD
ID: 42 0F 10 00 FF FB 8B 17
Version: AMD Phenom(tm) II X4 940 Processor
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Core Count: 4
Core Enabled: 4
Thread Count: 4
Characteristics:
64-bit capable
Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 16384 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 4
0x0006
0x0007
0x0008
0x0009
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 4 5
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A3
Bank Connections: 6 7
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Other
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Other
Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Other
Port Type: USB
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Other
Port Type: USB
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Other
Port Type: USB
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Other
Port Type: USB
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB7
External Connector Type: Other
Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB8
External Connector Type: Other
Port Type: USB
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB9
External Connector Type: Other
Port Type: USB
Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0022, DMI type 9, 13 bytes
System Slot Information
Designation: PCI-X
Type: 32-bit PCI-X
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
Handle 0x0023, DMI type 9, 13 bytes
System Slot Information
Designation: PCI-X
Type: 32-bit PCI-X
Current Usage: Available
Length: Long
ID: 29
Characteristics:
5.0 V is provided
Handle 0x0024, DMI type 9, 13 bytes
System Slot Information
Designation: PCI-X
Type: 32-bit PCI-X
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0025, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0026, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0027, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0028, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0029, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002B, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0026
Partition Width: 0
Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0027
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x002D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0028
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x002E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000BFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x002F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x000C0000000
Ending Address: 0x000FFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x0030, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0031, DMI type 188, 212 bytes
OEM-specific Type
Header and Data:
BC D4 31 00 00 00 00 C0 00 00 00 00 00 00 00 40
01 00 00 00 00 06 76 00 00 00 00 00 08 00 00 00
00 40 40 00 10 08 01 00 03 00 00 00 00 00 3F 01
00 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00
00 00 00 00 03 00 00 00 00 00 00 00 04 00 00 00
00 00 00 00 05 00 00 00 00 00 00 00 06 00 00 00
00 00 00 00 07 00 00 00 03 40 00 C0 01 00 00 00
01 01 00 00 01 02 00 00 01 03 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 E0 3C F8 00
E0 3C F8 00 00 00 00 00 00 00 00 00 06 00 48 0B
00 00 00 00 22 00 00 00 40 00 00 00 26 99 14 0C
45 60 92 00 10 08 01 00 00 02 00 00 00 00 00 00
5C 00 B0 4A 0C 00 58 3F 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0032, DMI type 190, 212 bytes
OEM-specific Type
Header and Data:
BE D4 32 00 10 05 00 00 00 00 00 00 24 A4 40 04
C0 0F E0 2C 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 27 00 00 00 00 00 00 00
00 00 00 00 27 5F E0 31 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0033, DMI type 192, 244 bytes
OEM-specific Type
Header and Data:
C0 F4 33 00 06 40 00 00 22 32 11 10 20 20 2F 00
E7 88 71 0E F0 00 0C 00 22 32 11 10 11 12 11 11
11 11 12 11 11 12 11 11 11 10 10 11 11 10 12 10
11 10 10 11 11 11 00 20 20 2F 00 0E 0E 0E 0E 10
10 0E 10 0E 0E 0E 0E 0E 0E 0E 10 0E 0E 0E 0E 0E
0E 0E 10 0E 10 00 AD 36 FB 30 F0 00 0C 00 75 00
72 00 6D 00 6B 00 75 00 7C 00 79 00 73 00 71 00
7C 00 15 00 12 00 0D 00 0B 00 00 00 1C 00 19 00
13 00 11 00 00 00 6B 00 6B 00 6F 00 74 00 00 00
70 00 73 00 78 00 7C 00 00 00 0B 00 0B 00 0F 00
14 00 00 00 10 00 13 00 18 00 1C 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 14 13 13 14 14 12 13 14 13 00 00 00
98 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0034, DMI type 194, 244 bytes
OEM-specific Type
Header and Data:
C2 F4 34 00 06 40 00 00 22 32 11 10 20 20 2F 00
63 8C 31 06 F0 00 0C 00 22 32 11 10 11 12 11 12
11 12 11 12 11 12 11 12 10 11 11 10 11 11 12 12
10 11 11 10 11 11 00 20 20 2F 00 10 0E 0E 10 10
10 0E 0E 10 0E 0E 10 0E 0E 10 10 0C 10 0E 10 0E
0E 10 10 10 10 00 EB 95 EC 2F F0 00 0C 00 76 00
73 00 6E 00 6A 00 76 00 7E 00 7B 00 76 00 72 00
7E 00 16 00 13 00 0E 00 0A 00 00 00 1E 00 1B 00
16 00 12 00 00 00 6B 00 6C 00 73 00 74 00 00 00
73 00 75 00 7C 00 7E 00 00 00 0B 00 0C 00 13 00
14 00 00 00 13 00 15 00 1C 00 1E 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 13 14 14 14 14 13 14 13 14 00 00 00
2C 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0035, DMI type 127, 4 bytes
End Of Table
Regards
Mark
Andreas Herrmann wrote:
> On Fri, Jan 23, 2009 at 10:34:43AM +0100, Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>> The MB is a Biostar TA770+. It is not yet listed as one with new
>>> BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
>>> The only difference in the Sata port arrangement and the BIOS type.
>>>
>>> I guess I'll just keep pinging them.
>> OK I have now the official bios for this CPU/MB combo. I still cannot boot a
>> 1000 HZ kernel.
>
> Looking at the Biostar pages I am still not completely convinced that
> your CPU/MB combo is supported. At least it is not listed there.
> So far TA770 A2+ SE, rev. 6.X, is listed. Did the Biostar folks confirm you
> that your mobo model/revision is supported, too?
>
The BIOS came from http://www.biostar.cn/upload/Bios/A78XAC25.BST.rar
The BIOSTAR folks supporting the US seem to be asleep. I've never gotten an
actual response from them and have tried on 3 other occasions for other things.
>> Here is my new dmesg while running a 250Hz kernel.
>
> ...
>
>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> ...
>> CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
> ...
>> CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
> ...
>> CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
> ...
>> CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
>
> Looks good so far.
>
>> eth0: no IPv6 routers present
>> warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
>> hda-intel: Invalid position buffer, using LPIB read method instead.
>> NET: Registered protocol family 4
>> NET: Registered protocol family 3
>> NET: Registered protocol family 5
>
> This reminds me of some system hangs with older kernels when C1E was
> activated.
>
> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
> when using 2.6.26.X?
> Can you also try to boot .27 or .28?
>
OK, I tried all the above on 2.6.26.8 ann 2.6.27.10. No difference.
Regards
Mark
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> On Fri, Jan 23, 2009 at 10:34:43AM +0100, Mark Hounschell wrote:
>>> Mark Hounschell wrote:
>>>> The MB is a Biostar TA770+. It is not yet listed as one with new
>>>> BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
>>>> The only difference in the Sata port arrangement and the BIOS type.
>>>>
>>>> I guess I'll just keep pinging them.
>>> OK I have now the official bios for this CPU/MB combo. I still cannot boot a
>>> 1000 HZ kernel.
>> Looking at the Biostar pages I am still not completely convinced that
>> your CPU/MB combo is supported. At least it is not listed there.
>> So far TA770 A2+ SE, rev. 6.X, is listed. Did the Biostar folks confirm you
>> that your mobo model/revision is supported, too?
>>
>
> The BIOS came from http://www.biostar.cn/upload/Bios/A78XAC25.BST.rar
>
> The BIOSTAR folks supporting the US seem to be asleep. I've never gotten an
> actual response from them and have tried on 3 other occasions for other things.
>
>>> Here is my new dmesg while running a 250Hz kernel.
>> ...
>>
>>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
>> ...
>>> CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
>> ...
>>> CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
>> ...
>>> CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
>> ...
>>> CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
>> Looks good so far.
>>
>>> eth0: no IPv6 routers present
>>> warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
>>> hda-intel: Invalid position buffer, using LPIB read method instead.
>>> NET: Registered protocol family 4
>>> NET: Registered protocol family 3
>>> NET: Registered protocol family 5
>> This reminds me of some system hangs with older kernels when C1E was
>> activated.
>>
>> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
>> when using 2.6.26.X?
>> Can you also try to boot .27 or .28?
>>
>
> OK, I tried all the above on 2.6.26.8 ann 2.6.27.10. No difference.
>
> Regards
> Mark
>
If there is anything else I can try, I'm at your disposal.
Regards
Mark
On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
[.. ]
> If there is anything else I can try, I'm at your disposal.
Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
your problem. Can you please send the failing .config. And also where
exactly does your kernel hang during the boot process, can you capture
any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
if possible. Finally, what does 'cat /proc/timer_list' on the working
kernel say?
Thanks.
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. M?nchen, Germany
Research | Gesch?ftsf?hrer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis M?nchen
(OSRC) | Registergericht M?nchen, HRB Nr. 43632
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26.8
# Tue Jan 27 18:47:38 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_CLASSIC_RCU is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=64000
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_TC1100_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_EEEPC_LAPTOP=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=m
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_LEGACY=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_CS89x0=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_SFC=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_SMCTR=m
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
# CONFIG_ARLAN is not set
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLWIFI_RFKILL is not set
CONFIG_IWL4965=m
# CONFIG_IWL4965_HT is not set
# CONFIG_IWL4965_LEDS is not set
# CONFIG_IWL4965_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL4965_SENSITIVITY is not set
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWL3945=m
# CONFIG_IWL3945_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL3945_LEDS is not set
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not set
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300 is not set
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_HYSDN=m
# CONFIG_HYSDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9712 is not set
# CONFIG_TOUCHSCREEN_WM9713 is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
# CONFIG_DVB_USB_CXUSB is not set
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
#
# Generic devices
#
CONFIG_SND_PCSP=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
#
# ISA devices
#
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
# CONFIG_SND_SC6000 is not set
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
# CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
# CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# SPI devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1760_PCI is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_CLEVO_MAIL=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_SMX=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
Mark Hounschell wrote:
> Borislav Petkov wrote:
>> On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
>>
>> [.. ]
>>
>>> If there is anything else I can try, I'm at your disposal.
>> Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
>> your problem. Can you please send the failing .config. And also where
>> exactly does your kernel hang during the boot process, can you capture
>> any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
>> if possible. Finally, what does 'cat /proc/timer_list' on the working
>> kernel say?
>>
>> Thanks.
>>
>
>
> You test booted using a Phenom-II?
>
> The config file is attached. The timer_list while running the 250 Hz 2.6.26.8
> kernel output is below. When it happens I have no keyboard at all. SysRq is not
> functional at this time. Sorry.
>
> Sorry it took so long. I was out of town today.
>
> Timer List Version: v0.3
> HRTIMER_MAX_CLOCK_BASES: 2
> now at 675544989236 nsecs
>
> cpu: 0
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675548000000 nsecs [in 3010764 nsecs]
> .expires_next : 675548000000 nsecs
> .hres_active : 1
> .nr_events : 170138
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
> cpu: 1
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675548500000 nsecs [in 3510764 nsecs]
> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, ntpd/4446
> # expires at 676081032589 nsecs [in 536043353 nsecs]
> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4456
> # expires at 683136927993 nsecs [in 7591938757 nsecs]
> #3: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, cron/4539
> # expires at 711791265959 nsecs [in 36246276723 nsecs]
> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, qmgr/4549
> # expires at 1001716635269 nsecs [in 326171646033 nsecs]
> #5: <f31ffec0>, it_real_fn, S:01, do_setitimer, master/4517
> # expires at 1001716661669 nsecs [in 326171672433 nsecs]
> #6: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4459
> # expires at 28868136987269 nsecs [in 28192591998033 nsecs]
> .expires_next : 675548500000 nsecs
> .hres_active : 1
> .nr_events : 169510
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
> cpu: 2
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675549000000 nsecs [in 4010764 nsecs]
> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, Xorg/3325
> # expires at 675563416492 nsecs [in 18427256 nsecs]
> #2: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, kwrapper/4982
> # expires at 676109815468 nsecs [in 564826232 nsecs]
> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4458
> # expires at 683435589386 nsecs [in 7890600150 nsecs]
> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, pickup/4548
> # expires at 1001716659224 nsecs [in 326171669988 nsecs]
> .expires_next : 675549000000 nsecs
> .hres_active : 1
> .nr_events : 172253
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
> cpu: 3
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675545500000 nsecs [in 510764 nsecs]
> #1: <f31ffec0>, sched_rt_period_timer, S:01, enqueue_task_rt, swapper/1
> # expires at 676000000000 nsecs [in 455010764 nsecs]
> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5123
> # expires at 689314480389 nsecs [in 13769491153 nsecs]
> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5209
> # expires at 689361744389 nsecs [in 13816755153 nsecs]
> #4: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4457
> # expires at 3668136917342 nsecs [in 2992591928106 nsecs]
> .expires_next : 675545500000 nsecs
> .hres_active : 1
> .nr_events : 171267
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
>
> Tick Device: mode: 1
> Clock Event Device: hpet
> max_delta_ns: 2147483647
> min_delta_ns: 5000
> mult: 61496114
> shift: 32
> mode: 3
> next_event: 9223372036854775807 nsecs
> set_next_event: hpet_legacy_next_event
> set_mode: hpet_legacy_set_mode
> event_handler: tick_handle_oneshot_broadcast
> tick_broadcast_mask: 00000000
> tick_broadcast_oneshot_mask: 00000000
>
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675548000000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675548500000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675549000000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675545500000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
>
>
> Regards
> Mark
>
Oh I Forgot. The last thing I see on the screen is.
Checking if this processor honours the WP bit even in hypervisor mode... OK.
SLUB: Genslabs=12, HWalign=64, Order=0,3, MinObjects=0, CPUs=4, Nodes=1
Mark
Mark Hounschell wrote:
> Mark Hounschell wrote:
>> Borislav Petkov wrote:
>>> On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
>>>
>>> [.. ]
>>>
>>>> If there is anything else I can try, I'm at your disposal.
>>> Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
>>> your problem. Can you please send the failing .config. And also where
>>> exactly does your kernel hang during the boot process, can you capture
>>> any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
>>> if possible. Finally, what does 'cat /proc/timer_list' on the working
>>> kernel say?
>>>
>>> Thanks.
>>>
>>
>> You test booted using a Phenom-II?
>>
>> The config file is attached. The timer_list while running the 250 Hz 2.6.26.8
>> kernel output is below. When it happens I have no keyboard at all. SysRq is not
>> functional at this time. Sorry.
>>
>> Sorry it took so long. I was out of town today.
>>
>> Timer List Version: v0.3
>> HRTIMER_MAX_CLOCK_BASES: 2
>> now at 675544989236 nsecs
>>
>> cpu: 0
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675548000000 nsecs [in 3010764 nsecs]
>> .expires_next : 675548000000 nsecs
>> .hres_active : 1
>> .nr_events : 170138
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>> cpu: 1
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675548500000 nsecs [in 3510764 nsecs]
>> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, ntpd/4446
>> # expires at 676081032589 nsecs [in 536043353 nsecs]
>> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4456
>> # expires at 683136927993 nsecs [in 7591938757 nsecs]
>> #3: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, cron/4539
>> # expires at 711791265959 nsecs [in 36246276723 nsecs]
>> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, qmgr/4549
>> # expires at 1001716635269 nsecs [in 326171646033 nsecs]
>> #5: <f31ffec0>, it_real_fn, S:01, do_setitimer, master/4517
>> # expires at 1001716661669 nsecs [in 326171672433 nsecs]
>> #6: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4459
>> # expires at 28868136987269 nsecs [in 28192591998033 nsecs]
>> .expires_next : 675548500000 nsecs
>> .hres_active : 1
>> .nr_events : 169510
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>> cpu: 2
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675549000000 nsecs [in 4010764 nsecs]
>> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, Xorg/3325
>> # expires at 675563416492 nsecs [in 18427256 nsecs]
>> #2: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, kwrapper/4982
>> # expires at 676109815468 nsecs [in 564826232 nsecs]
>> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4458
>> # expires at 683435589386 nsecs [in 7890600150 nsecs]
>> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, pickup/4548
>> # expires at 1001716659224 nsecs [in 326171669988 nsecs]
>> .expires_next : 675549000000 nsecs
>> .hres_active : 1
>> .nr_events : 172253
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>> cpu: 3
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675545500000 nsecs [in 510764 nsecs]
>> #1: <f31ffec0>, sched_rt_period_timer, S:01, enqueue_task_rt, swapper/1
>> # expires at 676000000000 nsecs [in 455010764 nsecs]
>> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5123
>> # expires at 689314480389 nsecs [in 13769491153 nsecs]
>> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5209
>> # expires at 689361744389 nsecs [in 13816755153 nsecs]
>> #4: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4457
>> # expires at 3668136917342 nsecs [in 2992591928106 nsecs]
>> .expires_next : 675545500000 nsecs
>> .hres_active : 1
>> .nr_events : 171267
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>>
>> Tick Device: mode: 1
>> Clock Event Device: hpet
>> max_delta_ns: 2147483647
>> min_delta_ns: 5000
>> mult: 61496114
>> shift: 32
>> mode: 3
>> next_event: 9223372036854775807 nsecs
>> set_next_event: hpet_legacy_next_event
>> set_mode: hpet_legacy_set_mode
>> event_handler: tick_handle_oneshot_broadcast
>> tick_broadcast_mask: 00000000
>> tick_broadcast_oneshot_mask: 00000000
>>
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675548000000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675548500000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675549000000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675545500000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>>
>>
>> Regards
>> Mark
>>
>
> Oh I Forgot. The last thing I see on the screen is.
>
> Checking if this processor honours the WP bit even in hypervisor mode... OK.
> SLUB: Genslabs=12, HWalign=64, Order=0,3, MinObjects=0, CPUs=4, Nodes=1
>
> Mark
> --
So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
anything else I can do?
Thanks
Mark