This patch adds a driver vor VIA's SD/MMC host controller, present in
recent VIA chipsets such as the VX800 and VX855
Signed-off-by: Joseph Chan <[email protected]>
Signed-off-by: Harald Welte <[email protected]>
---
This is version v6 of the patch, incorporating the following changes
as opposed to v5:
* proper SD high speed support
* don't overclock the card
* make sure debug statements are correctly formatted in syslog
* Add kernel message in case we end up having to overlock a card due to
a controller bug
MAINTAINERS | 8 +
drivers/mmc/host/Kconfig | 8 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/via-sdmmc.c | 1332 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1349 insertions(+), 0 deletions(-)
create mode 100644 drivers/mmc/host/via-sdmmc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 08e4894..5b5c5cb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6139,6 +6139,14 @@ S: Maintained
F: Documentation/i2c/busses/i2c-viapro
F: drivers/i2c/busses/i2c-viapro.c
+VIA SD/MMC CARD CONTROLLER DRIVER
+P: Joseph Chan
+M: [email protected]
+P: Harald Welte
+M: [email protected]
+S: MAINTAINED
+F: drivers/mmc/host/via-sdmmc.c
+
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
P: Joseph Chan
M: [email protected]
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 75337e4..ece24a4 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -254,3 +254,11 @@ config MMC_CB710
This driver can also be built as a module. If so, the module
will be called cb710-mmc.
+config MMC_VIA_SDMMC
+ tristate "VIA SD/MMC Card Reader Driver"
+ depends on PCI
+ help
+ This option enables support for SD/MMC Card Reader that is part
+ of a multi-functional card reader PCI peripheral. This in turn
+ is part of recent VIA integrated northbridge/southbridge products.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ce9c8b6..cc09919 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -29,5 +29,6 @@ endif
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
+obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
new file mode 100644
index 0000000..bc92c61
--- /dev/null
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -0,0 +1,1332 @@
+/*
+ * drivers/mmc/host/via-sdmmc.c - VIA SD/MMC Card Reader driver
+ * Copyright (c) 2008, VIA Technologies Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+
+#include <linux/mmc/host.h>
+
+#define DRV_NAME "via_sdmmc"
+
+#define MMC_STOP_TRANSMISSION 12
+#define PCI_DEVICE_ID_VIA_9530 0x9530
+
+#define VIA_CRDR_SDC_OFF 0x200
+#define VIA_CRDR_DDMA_OFF 0x400
+#define VIA_CRDR_PCICTRL_OFF 0x600
+
+#define VIA_CRDR_MIN_CLOCK 375000
+#define VIA_CRDR_MAX_CLOCK 48000000
+
+/*
+ * PCI registers
+ */
+
+#define VIA_CRDR_PCI_WORK_MODE 0x40
+#define VIA_CRDR_PCI_DBG_MODE 0x41
+
+/*
+ * SDC MMIO Registers
+ */
+
+#define VIA_CRDR_SDCTRL 0x0
+#define VIA_CRDR_SDCTRL_START 0x01
+#define VIA_CRDR_SDCTRL_WRITE 0x04
+#define VIA_CRDR_SDCTRL_SINGLE_WR 0x10
+#define VIA_CRDR_SDCTRL_SINGLE_RD 0x20
+#define VIA_CRDR_SDCTRL_MULTI_WR 0x30
+#define VIA_CRDR_SDCTRL_MULTI_RD 0x40
+#define VIA_CRDR_SDCTRL_STOP 0x70
+
+#define VIA_CRDR_SDCTRL_RSP_NONE 0x0
+#define VIA_CRDR_SDCTRL_RSP_R1 0x10000
+#define VIA_CRDR_SDCTRL_RSP_R2 0x20000
+#define VIA_CRDR_SDCTRL_RSP_R3 0x30000
+#define VIA_CRDR_SDCTRL_RSP_R1B 0x90000
+
+#define VIA_CRDR_SDCARG 0x4
+
+#define VIA_CRDR_SDBUSMODE 0x8
+#define VIA_CRDR_SDMODE_4BIT 0x02
+#define VIA_CRDR_SDMODE_POWER 0x40
+
+#define VIA_CRDR_SDBLKLEN 0xc
+/*
+ * Bit 0 -Bit 10 : Block length. So, the maximum block length should be 2048.
+ * Bit 11 - Bit 13 : Reserved.
+ * GPIDET : Select GPI pin to detect card, GPI means CR_CD# in top design.
+ * INTEN : Enable SD host interrupt.
+ * Bit 16 - Bit 31 : Block count. So, the maximun block count should be 65536.
+ */
+#define VIA_CRDR_SDBLKLEN_GPIDET 0x2000
+#define VIA_CRDR_SDBLKLEN_INTEN 0x8000
+#define VIA_CRDR_MAX_BLOCK_COUNT 65536
+#define VIA_CRDR_MAX_BLOCK_LENGTH 2048
+
+#define VIA_CRDR_SDRESP0 0x10
+#define VIA_CRDR_SDRESP1 0x14
+#define VIA_CRDR_SDRESP2 0x18
+#define VIA_CRDR_SDRESP3 0x1c
+
+#define VIA_CRDR_SDCURBLKCNT 0x20
+
+#define VIA_CRDR_SDINTMASK 0x24
+/*
+ * MBDIE : Multiple Blocks transfer Done Interrupt Enable
+ * BDDIE : Block Data transfer Done Interrupt Enable
+ * CIRIE : Card Insertion or Removal Interrupt Enable
+ * CRDIE : Command-Response transfer Done Interrupt Enable
+ * CRTOIE : Command-Response response TimeOut Interrupt Enable
+ * ASCRDIE : Auto Stop Command-Response transfer Done Interrupt Enable
+ * DTIE : Data access Timeout Interrupt Enable
+ * SCIE : reSponse CRC error Interrupt Enable
+ * RCIE : Read data CRC error Interrupt Enable
+ * WCIE : Write data CRC error Interrupt Enable
+ */
+#define VIA_CRDR_SDINTMASK_MBDIE 0x10
+#define VIA_CRDR_SDINTMASK_BDDIE 0x20
+#define VIA_CRDR_SDINTMASK_CIRIE 0x80
+#define VIA_CRDR_SDINTMASK_CRDIE 0x200
+#define VIA_CRDR_SDINTMASK_CRTOIE 0x400
+#define VIA_CRDR_SDINTMASK_ASCRDIE 0x800
+#define VIA_CRDR_SDINTMASK_DTIE 0x1000
+#define VIA_CRDR_SDINTMASK_SCIE 0x2000
+#define VIA_CRDR_SDINTMASK_RCIE 0x4000
+#define VIA_CRDR_SDINTMASK_WCIE 0x8000
+
+#define VIA_CRDR_SDACTIVE_INTMASK \
+ (VIA_CRDR_SDINTMASK_MBDIE | VIA_CRDR_SDINTMASK_CIRIE \
+ | VIA_CRDR_SDINTMASK_CRDIE | VIA_CRDR_SDINTMASK_CRTOIE \
+ | VIA_CRDR_SDINTMASK_DTIE | VIA_CRDR_SDINTMASK_SCIE \
+ | VIA_CRDR_SDINTMASK_RCIE | VIA_CRDR_SDINTMASK_WCIE)
+
+#define VIA_CRDR_SDSTATUS 0x28
+/*
+ * CECC : Reserved
+ * WP : SD card Write Protect status
+ * SLOTD : Reserved
+ * SLOTG : SD SLOT status(Gpi pin status)
+ * MBD : Multiple Blocks transfer Done interrupt status
+ * BDD : Block Data transfer Done interrupt status
+ * CD : Reserved
+ * CIR : Card Insertion or Removal interrupt detected on GPI pin
+ * IO : Reserved
+ * CRD : Command-Response transfer Done interrupt status
+ * CRTO : Command-Response response TimeOut interrupt status
+ * ASCRDIE : Auto Stop Command-Response transfer Done interrupt status
+ * DT : Data access Timeout interrupt status
+ * SC : reSponse CRC error interrupt status
+ * RC : Read data CRC error interrupt status
+ * WC : Write data CRC error interrupt status
+ */
+#define VIA_CRDR_SDSTS_CECC 0x01
+#define VIA_CRDR_SDSTS_WP 0x02
+#define VIA_CRDR_SDSTS_SLOTD 0x04
+#define VIA_CRDR_SDSTS_SLOTG 0x08
+#define VIA_CRDR_SDSTS_MBD 0x10
+#define VIA_CRDR_SDSTS_BDD 0x20
+#define VIA_CRDR_SDSTS_CD 0x40
+#define VIA_CRDR_SDSTS_CIR 0x80
+#define VIA_CRDR_SDSTS_IO 0x100
+#define VIA_CRDR_SDSTS_CRD 0x200
+#define VIA_CRDR_SDSTS_CRTO 0x400
+#define VIA_CRDR_SDSTS_ASCRDIE 0x800
+#define VIA_CRDR_SDSTS_DT 0x1000
+#define VIA_CRDR_SDSTS_SC 0x2000
+#define VIA_CRDR_SDSTS_RC 0x4000
+#define VIA_CRDR_SDSTS_WC 0x8000
+
+#define VIA_CRDR_SDSTS_IGN_MASK\
+ (VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_IO)
+#define VIA_CRDR_SDSTS_INT_MASK \
+ (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD | VIA_CRDR_SDSTS_CD \
+ | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_IO | VIA_CRDR_SDSTS_CRD \
+ | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+ | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define VIA_CRDR_SDSTS_W1C_MASK \
+ (VIA_CRDR_SDSTS_CECC | VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_BDD \
+ | VIA_CRDR_SDSTS_CD | VIA_CRDR_SDSTS_CIR | VIA_CRDR_SDSTS_CRD \
+ | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_ASCRDIE | VIA_CRDR_SDSTS_DT \
+ | VIA_CRDR_SDSTS_SC | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+#define VIA_CRDR_SDSTS_CMD_MASK \
+ (VIA_CRDR_SDSTS_CRD | VIA_CRDR_SDSTS_CRTO | VIA_CRDR_SDSTS_SC)
+#define VIA_CRDR_SDSTS_DATA_MASK\
+ (VIA_CRDR_SDSTS_MBD | VIA_CRDR_SDSTS_DT \
+ | VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC)
+
+#define VIA_CRDR_SDSTATUS2 0x2a
+/*
+ * CFE : Enable SD host automatic Clock FReezing
+ */
+#define VIA_CRDR_SDSTS_CFE 0x80
+
+#define VIA_CRDR_SDRSPTMO 0x2C
+
+#define VIA_CRDR_SDCLKSEL 0x30
+
+#define VIA_CRDR_SDEXTCTRL 0x34
+#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SD 0x01
+#define VIS_CRDR_SDEXTCTRL_SHIFT_9 0x02
+#define VIS_CRDR_SDEXTCTRL_MMC_8BIT 0x04
+#define VIS_CRDR_SDEXTCTRL_RELD_BLK 0x08
+#define VIS_CRDR_SDEXTCTRL_BAD_CMDA 0x10
+#define VIS_CRDR_SDEXTCTRL_BAD_DATA 0x20
+#define VIS_CRDR_SDEXTCTRL_AUTOSTOP_SPI 0x40
+#define VIA_CRDR_SDEXTCTRL_HISPD 0x80
+/* 0x38-0xFF reserved */
+
+/*
+ * Data DMA Control Registers
+ */
+
+#define VIA_CRDR_DMABASEADD 0x0
+#define VIA_CRDR_DMACOUNTER 0x4
+
+#define VIA_CRDR_DMACTRL 0x8
+/*
+ * DIR :Transaction Direction
+ * 0 : From card to memory
+ * 1 : From memory to card
+ */
+#define VIA_CRDR_DMACTRL_DIR 0x100
+#define VIA_CRDR_DMACTRL_ENIRQ 0x10000
+#define VIA_CRDR_DMACTRL_SFTRST 0x1000000
+
+#define VIA_CRDR_DMASTS 0xc
+
+#define VIA_CRDR_DMASTART 0x10
+/*0x14-0xFF reserved*/
+
+/*
+ * PCI Control Registers
+ */
+
+/*0x0 - 0x1 reserved*/
+#define VIA_CRDR_PCICLKGATT 0x2
+/*
+ * SFTRST :
+ * 0 : Soft reset all the controller and it will be de-asserted automatically
+ * 1 : Soft reset is de-asserted
+ */
+#define VIA_CRDR_PCICLKGATT_SFTRST 0x01
+/*
+ * POWSEL : Pad power select
+ * 0 : 1.8V
+ * 1 : 3.3V
+ * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_POWSEL 0x10
+#define VIA_CRDR_POW_180 0
+#define VIA_CRDR_POW_330 1
+/*
+ * POWOFF : Power on/off select
+ * 0 : Power off
+ * 1 : Power on
+ * NOTE : No mater what the actual value should be, this bit always
+ * read as 0. This is a hardware bug.
+ */
+#define VIA_CRDR_PCICLKGATT_POWOFF 0x20
+
+#define VIA_CRDR_PCISDCCLK 0x5
+
+#define VIA_CRDR_PCIDMACLK 0x7
+#define VIA_CRDR_PCIDMACLK_SDC 0x2
+
+#define VIA_CRDR_PCIINTCTRL 0x8
+#define VIA_CRDR_PCIINTCTRL_SDCIRQEN 0x04
+
+#define VIA_CRDR_PCIINTSTATUS 0x9
+#define VIA_CRDR_PCIINTSTATUS_SDC 0x04
+
+#define VIA_CRDR_PCITMOCTRL 0xa
+#define VIA_CRDR_PCITMOCTRL_NO 0x0
+#define VIA_CRDR_PCITMOCTRL_32US 0x1
+#define VIA_CRDR_PCITMOCTRL_256US 0x2
+#define VIA_CRDR_PCITMOCTRL_1024US 0x3
+#define VIA_CRDR_PCITMOCTRL_256MS 0x4
+#define VIA_CRDR_PCITMOCTRL_512MS 0x5
+#define VIA_CRDR_PCITMOCTRL_1024MS 0x6
+
+/*0xB-0xFF reserved*/
+
+enum PCI_HOST_CLK_CONTROL {
+ PCI_CLK_375K = 0x03,
+ PCI_CLK_8M = 0x04,
+ PCI_CLK_12M = 0x00,
+ PCI_CLK_16M = 0x05,
+ PCI_CLK_24M = 0x01,
+ PCI_CLK_33M = 0x06,
+ PCI_CLK_48M = 0x02
+};
+
+struct sdhcreg {
+ u32 sdcontrol_reg;
+ u32 sdcmdarg_reg;
+ u32 sdbusmode_reg;
+ u32 sdblklen_reg;
+ u32 sdresp_reg[4];
+ u32 sdcurblkcnt_reg;
+ u32 sdintmask_reg;
+ u32 sdstatus_reg;
+ u32 sdrsptmo_reg;
+ u32 sdclksel_reg;
+ u32 sdextctrl_reg;
+};
+
+struct pcictrlreg {
+ u8 reserve[2];
+ u8 pciclkgat_reg;
+ u8 pcinfcclk_reg;
+ u8 pcimscclk_reg;
+ u8 pcisdclk_reg;
+ u8 pcicaclk_reg;
+ u8 pcidmaclk_reg;
+ u8 pciintctrl_reg;
+ u8 pciintstatus_reg;
+ u8 pcitmoctrl_reg;
+ u8 Resv;
+};
+
+struct via_crdr_mmc_host {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ void __iomem *mmiobase;
+ void __iomem *sdhc_mmiobase;
+ void __iomem *ddma_mmiobase;
+ void __iomem *pcictrl_mmiobase;
+
+ struct pcictrlreg pm_pcictrl_reg;
+ struct sdhcreg pm_sdhc_reg;
+
+ struct work_struct carddet_work;
+ struct tasklet_struct finish_tasklet;
+
+ struct timer_list timer;
+ spinlock_t lock;
+ u8 power;
+};
+
+static struct pci_device_id via_ids[] = {
+ {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, via_ids);
+
+static void via_print_sdchc(struct via_crdr_mmc_host *host)
+{
+ void __iomem *addrbase = host->sdhc_mmiobase;
+
+ pr_debug("SDC MMIO Registers:\n");
+ pr_debug("SDCONTROL=%08x, SDCMDARG=%08x, SDBUSMODE=%08x\n",
+ readl(addrbase + VIA_CRDR_SDCTRL),
+ readl(addrbase + VIA_CRDR_SDCARG),
+ readl(addrbase + VIA_CRDR_SDBUSMODE));
+ pr_debug("SDBLKLEN=%08x, SDCURBLKCNT=%08x, SDINTMASK=%08x\n",
+ readl(addrbase + VIA_CRDR_SDBLKLEN),
+ readl(addrbase + VIA_CRDR_SDCURBLKCNT),
+ readl(addrbase + VIA_CRDR_SDINTMASK));
+ pr_debug("SDSTATUS=%08x, SDCLKSEL=%08x, SDEXTCTRL=%08x\n",
+ readl(addrbase + VIA_CRDR_SDSTATUS),
+ readl(addrbase + VIA_CRDR_SDCLKSEL),
+ readl(addrbase + VIA_CRDR_SDEXTCTRL));
+}
+
+static void via_print_pcictrl(struct via_crdr_mmc_host *host)
+{
+ void __iomem *addrbase = host->pcictrl_mmiobase;
+
+ pr_debug("PCI Control Registers:\n");
+ pr_debug("PCICLKGATT=%02x, PCISDCCLK=%02x, PCIDMACLK=%02x\n",
+ readb(addrbase + VIA_CRDR_PCICLKGATT),
+ readb(addrbase + VIA_CRDR_PCISDCCLK),
+ readb(addrbase + VIA_CRDR_PCIDMACLK));
+ pr_debug("PCIINTCTRL=%02x, PCIINTSTATUS=%02x\n",
+ readb(addrbase + VIA_CRDR_PCIINTCTRL),
+ readb(addrbase + VIA_CRDR_PCIINTSTATUS));
+}
+
+static void via_save_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+ struct pcictrlreg *pm_pcictrl_reg;
+ void __iomem *addrbase;
+
+ pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+ addrbase = host->pcictrl_mmiobase;
+
+ pm_pcictrl_reg->pciclkgat_reg = readb(addrbase + VIA_CRDR_PCICLKGATT);
+ pm_pcictrl_reg->pciclkgat_reg |=
+ VIA_CRDR_PCICLKGATT_POWSEL | VIA_CRDR_PCICLKGATT_POWOFF;
+ pm_pcictrl_reg->pcisdclk_reg = readb(addrbase + VIA_CRDR_PCISDCCLK);
+ pm_pcictrl_reg->pcidmaclk_reg = readb(addrbase + VIA_CRDR_PCIDMACLK);
+ pm_pcictrl_reg->pciintctrl_reg = readb(addrbase + VIA_CRDR_PCIINTCTRL);
+ pm_pcictrl_reg->pciintstatus_reg =
+ readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+ pm_pcictrl_reg->pcitmoctrl_reg = readb(addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_restore_pcictrlreg(struct via_crdr_mmc_host *host)
+{
+ struct pcictrlreg *pm_pcictrl_reg;
+ void __iomem *addrbase;
+
+ pm_pcictrl_reg = &(host->pm_pcictrl_reg);
+ addrbase = host->pcictrl_mmiobase;
+
+ writeb(pm_pcictrl_reg->pciclkgat_reg, addrbase + VIA_CRDR_PCICLKGATT);
+ writeb(pm_pcictrl_reg->pcisdclk_reg, addrbase + VIA_CRDR_PCISDCCLK);
+ writeb(pm_pcictrl_reg->pcidmaclk_reg, addrbase + VIA_CRDR_PCIDMACLK);
+ writeb(pm_pcictrl_reg->pciintctrl_reg, addrbase + VIA_CRDR_PCIINTCTRL);
+ writeb(pm_pcictrl_reg->pciintstatus_reg,
+ addrbase + VIA_CRDR_PCIINTSTATUS);
+ writeb(pm_pcictrl_reg->pcitmoctrl_reg, addrbase + VIA_CRDR_PCITMOCTRL);
+}
+
+static void via_save_sdcreg(struct via_crdr_mmc_host *host)
+{
+ struct sdhcreg *pm_sdhc_reg;
+ void __iomem *addrbase;
+
+ pm_sdhc_reg = &(host->pm_sdhc_reg);
+ addrbase = host->sdhc_mmiobase;
+
+ pm_sdhc_reg->sdcontrol_reg = readl(addrbase + VIA_CRDR_SDCTRL);
+ pm_sdhc_reg->sdcmdarg_reg = readl(addrbase + VIA_CRDR_SDCARG);
+ pm_sdhc_reg->sdbusmode_reg = readl(addrbase + VIA_CRDR_SDBUSMODE);
+ pm_sdhc_reg->sdblklen_reg = readl(addrbase + VIA_CRDR_SDBLKLEN);
+ pm_sdhc_reg->sdcurblkcnt_reg = readl(addrbase + VIA_CRDR_SDCURBLKCNT);
+ pm_sdhc_reg->sdintmask_reg = readl(addrbase + VIA_CRDR_SDINTMASK);
+ pm_sdhc_reg->sdstatus_reg = readl(addrbase + VIA_CRDR_SDSTATUS);
+ pm_sdhc_reg->sdrsptmo_reg = readl(addrbase + VIA_CRDR_SDRSPTMO);
+ pm_sdhc_reg->sdclksel_reg = readl(addrbase + VIA_CRDR_SDCLKSEL);
+ pm_sdhc_reg->sdextctrl_reg = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_restore_sdcreg(struct via_crdr_mmc_host *host)
+{
+ struct sdhcreg *pm_sdhc_reg;
+ void __iomem *addrbase;
+
+ pm_sdhc_reg = &(host->pm_sdhc_reg);
+ addrbase = host->sdhc_mmiobase;
+
+ writel(pm_sdhc_reg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+ writel(pm_sdhc_reg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+ writel(pm_sdhc_reg->sdbusmode_reg, addrbase + VIA_CRDR_SDBUSMODE);
+ writel(pm_sdhc_reg->sdblklen_reg, addrbase + VIA_CRDR_SDBLKLEN);
+ writel(pm_sdhc_reg->sdcurblkcnt_reg, addrbase + VIA_CRDR_SDCURBLKCNT);
+ writel(pm_sdhc_reg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+ writel(pm_sdhc_reg->sdstatus_reg, addrbase + VIA_CRDR_SDSTATUS);
+ writel(pm_sdhc_reg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+ writel(pm_sdhc_reg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+ writel(pm_sdhc_reg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+}
+
+static void via_set_ddma(struct via_crdr_mmc_host *host,
+ dma_addr_t dmaaddr, u32 count, int dir, int enirq)
+{
+ void __iomem *addrbase;
+ u32 ctrl_data = 0;
+
+ if (enirq)
+ ctrl_data |= VIA_CRDR_DMACTRL_ENIRQ;
+
+ if (dir)
+ ctrl_data |= VIA_CRDR_DMACTRL_DIR;
+
+ addrbase = host->ddma_mmiobase;
+
+ writel(dmaaddr, addrbase + VIA_CRDR_DMABASEADD);
+ writel(count, addrbase + VIA_CRDR_DMACOUNTER);
+ writel(ctrl_data, addrbase + VIA_CRDR_DMACTRL);
+ writel(0x01, addrbase + VIA_CRDR_DMASTART);
+
+ /* It seems that our DMA can not work normally with 375kHz clock */
+ /* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */
+ addrbase = host->pcictrl_mmiobase;
+ if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) {
+ dev_info(host->mmc->parent, "forcing card speed to 8MHz\n");
+ writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK);
+ }
+}
+
+static void via_sdc_preparedata(struct via_crdr_mmc_host *host,
+ struct mmc_data *data)
+{
+ void __iomem *addrbase;
+ u32 blk_reg;
+ int count;
+
+ WARN_ON(host->data);
+
+ /* Sanity checks */
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > host->mmc->max_blk_count);
+
+ host->data = data;
+
+ count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_READ) ?
+ PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+ BUG_ON(count != 1);
+
+ via_set_ddma(host, sg_dma_address(data->sg), sg_dma_len(data->sg),
+ (data->flags & MMC_DATA_WRITE) ? 1 : 0, 1);
+
+ addrbase = host->sdhc_mmiobase;
+
+ blk_reg = data->blksz - 1;
+ blk_reg |= VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+ blk_reg |= (data->blocks) << 16;
+
+ writel(blk_reg, addrbase + VIA_CRDR_SDBLKLEN);
+}
+
+static void via_sdc_get_response(struct via_crdr_mmc_host *host,
+ struct mmc_command *cmd)
+{
+ void __iomem *addrbase = host->sdhc_mmiobase;
+ u32 dwdata0 = readl(addrbase + VIA_CRDR_SDRESP0);
+ u32 dwdata1 = readl(addrbase + VIA_CRDR_SDRESP1);
+ u32 dwdata2 = readl(addrbase + VIA_CRDR_SDRESP2);
+ u32 dwdata3 = readl(addrbase + VIA_CRDR_SDRESP3);
+
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = ((u8) (dwdata1)) |
+ (((u8) (dwdata0 >> 24)) << 8) |
+ (((u8) (dwdata0 >> 16)) << 16) |
+ (((u8) (dwdata0 >> 8)) << 24);
+
+ cmd->resp[1] = ((u8) (dwdata2)) |
+ (((u8) (dwdata1 >> 24)) << 8) |
+ (((u8) (dwdata1 >> 16)) << 16) |
+ (((u8) (dwdata1 >> 8)) << 24);
+
+ cmd->resp[2] = ((u8) (dwdata3)) |
+ (((u8) (dwdata2 >> 24)) << 8) |
+ (((u8) (dwdata2 >> 16)) << 16) |
+ (((u8) (dwdata2 >> 8)) << 24);
+
+ cmd->resp[3] = 0xff |
+ ((((u8) (dwdata3 >> 24))) << 8) |
+ (((u8) (dwdata3 >> 16)) << 16) |
+ (((u8) (dwdata3 >> 8)) << 24);
+ } else {
+ dwdata0 >>= 8;
+ cmd->resp[0] = ((dwdata0 & 0xff) << 24) |
+ (((dwdata0 >> 8) & 0xff) << 16) |
+ (((dwdata0 >> 16) & 0xff) << 8) | (dwdata1 & 0xff);
+
+ dwdata1 >>= 8;
+ cmd->resp[1] = ((dwdata1 & 0xff) << 24) |
+ (((dwdata1 >> 8) & 0xff) << 16) |
+ (((dwdata1 >> 16) & 0xff) << 8);
+ }
+}
+
+static void via_sdc_send_command(struct via_crdr_mmc_host *host,
+ struct mmc_command *cmd)
+{
+ void __iomem *addrbase;
+ struct mmc_data *data;
+ u32 cmdctrl = 0;
+
+ WARN_ON(host->cmd);
+
+ data = cmd->data;
+ mod_timer(&host->timer, jiffies + HZ);
+ host->cmd = cmd;
+
+ /*Command index*/
+ cmdctrl = cmd->opcode << 8;
+
+ /*Response type*/
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_NONE;
+ break;
+ case MMC_RSP_R1:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1;
+ break;
+ case MMC_RSP_R1B:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R1B;
+ break;
+ case MMC_RSP_R2:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R2;
+ break;
+ case MMC_RSP_R3:
+ cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3;
+ break;
+ default:
+ pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));
+ break;
+ }
+
+ if (!(cmd->data))
+ goto nodata;
+
+ via_sdc_preparedata(host, data);
+
+ /*Command control*/
+ if (data->blocks > 1) {
+ if (data->flags & MMC_DATA_WRITE) {
+ cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+ cmdctrl |= VIA_CRDR_SDCTRL_MULTI_WR;
+ } else {
+ cmdctrl |= VIA_CRDR_SDCTRL_MULTI_RD;
+ }
+ } else {
+ if (data->flags & MMC_DATA_WRITE) {
+ cmdctrl |= VIA_CRDR_SDCTRL_WRITE;
+ cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_WR;
+ } else {
+ cmdctrl |= VIA_CRDR_SDCTRL_SINGLE_RD;
+ }
+ }
+
+nodata:
+ if (cmd == host->mrq->stop)
+ cmdctrl |= VIA_CRDR_SDCTRL_STOP;
+
+ cmdctrl |= VIA_CRDR_SDCTRL_START;
+
+ addrbase = host->sdhc_mmiobase;
+ writel(cmd->arg, addrbase + VIA_CRDR_SDCARG);
+ writel(cmdctrl, addrbase + VIA_CRDR_SDCTRL);
+}
+
+static void via_sdc_finish_data(struct via_crdr_mmc_host *host)
+{
+ struct mmc_data *data;
+
+ BUG_ON(!host->data);
+
+ data = host->data;
+ host->data = NULL;
+
+ if (data->error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blocks * data->blksz;
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_READ) ?
+ PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+
+ if (data->stop)
+ via_sdc_send_command(host, data->stop);
+ else
+ tasklet_schedule(&host->finish_tasklet);
+}
+
+static void via_sdc_finish_command(struct via_crdr_mmc_host *host)
+{
+ via_sdc_get_response(host, host->cmd);
+
+ host->cmd->error = 0;
+
+ if (!host->cmd->data)
+ tasklet_schedule(&host->finish_tasklet);
+
+ host->cmd = NULL;
+}
+
+static void via_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ void __iomem *addrbase;
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ u16 status;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ addrbase = host->pcictrl_mmiobase;
+ writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+ status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+ status &= VIA_CRDR_SDSTS_W1C_MASK;
+ writew(status, host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+ WARN_ON(host->mrq != NULL);
+ host->mrq = mrq;
+
+ status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+ if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ } else {
+ via_sdc_send_command(host, mrq->cmd);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_set_power(struct via_crdr_mmc_host *host,
+ unsigned short power)
+{
+ unsigned long flags;
+ u8 gatt, pwr = VIA_CRDR_POW_180;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+ pwr = VIA_CRDR_POW_180;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = VIA_CRDR_POW_330;
+ break;
+ default:
+ BUG();
+ }
+
+ if (host->power == pwr) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ host->power = pwr;
+
+ gatt = readb(host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ gatt |= VIA_CRDR_PCICLKGATT_POWOFF;
+ if (pwr == VIA_CRDR_POW_330)
+ gatt |= VIA_CRDR_PCICLKGATT_POWSEL;
+ writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ msleep(3);
+}
+
+static void via_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ void __iomem *addrbase;
+ u32 org_data, sdextctrl;
+ u8 clock;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ addrbase = host->sdhc_mmiobase;
+ org_data = readl(addrbase + VIA_CRDR_SDBUSMODE);
+ sdextctrl = readl(addrbase + VIA_CRDR_SDEXTCTRL);
+
+ if (ios->bus_width == MMC_BUS_WIDTH_1)
+ org_data &= ~VIA_CRDR_SDMODE_4BIT;
+ else
+ org_data |= VIA_CRDR_SDMODE_4BIT;
+
+ if (ios->power_mode == MMC_POWER_OFF)
+ org_data &= ~VIA_CRDR_SDMODE_POWER;
+ else
+ org_data |= VIA_CRDR_SDMODE_POWER;
+
+ if (ios->timing == MMC_TIMING_SD_HS)
+ sdextctrl |= VIA_CRDR_SDEXTCTRL_HISPD;
+ else
+ sdextctrl &= ~VIA_CRDR_SDEXTCTRL_HISPD;
+
+ writel(org_data, addrbase + VIA_CRDR_SDBUSMODE);
+ writel(sdextctrl, addrbase + VIA_CRDR_SDEXTCTRL);
+
+ if (ios->clock >= 48000000)
+ clock = PCI_CLK_48M;
+ else if (ios->clock >= 33000000)
+ clock = PCI_CLK_33M;
+ else if (ios->clock >= 24000000)
+ clock = PCI_CLK_24M;
+ else if (ios->clock >= 16000000)
+ clock = PCI_CLK_16M;
+ else if (ios->clock >= 12000000)
+ clock = PCI_CLK_12M;
+ else if (ios->clock >= 8000000)
+ clock = PCI_CLK_8M;
+ else
+ clock = PCI_CLK_375K;
+
+ addrbase = host->pcictrl_mmiobase;
+ if (readb(addrbase + VIA_CRDR_PCISDCCLK) != clock)
+ writeb(clock, addrbase + VIA_CRDR_PCISDCCLK);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ if (ios->power_mode != MMC_POWER_OFF)
+ via_sdc_set_power(host, ios->vdd);
+}
+
+static int via_sdc_get_ro(struct mmc_host *mmc)
+{
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ u16 status;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ status = readw(host->sdhc_mmiobase + VIA_CRDR_SDSTATUS);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return !(status & VIA_CRDR_SDSTS_WP);
+}
+
+static const struct mmc_host_ops via_sdc_ops = {
+ .request = via_sdc_request,
+ .set_ios = via_sdc_set_ios,
+ .get_ro = via_sdc_get_ro,
+};
+
+static void via_reset_pcictrl(struct via_crdr_mmc_host *host)
+{
+ void __iomem *addrbase;
+ unsigned long flags;
+ u8 gatt;
+
+ addrbase = host->pcictrl_mmiobase;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ via_save_pcictrlreg(host);
+ via_save_sdcreg(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ gatt = VIA_CRDR_PCICLKGATT_POWOFF;
+ if (host->power == VIA_CRDR_POW_330)
+ gatt |= VIA_CRDR_PCICLKGATT_POWSEL;
+ writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+ gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+ writeb(gatt, host->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ via_restore_pcictrlreg(host);
+ via_restore_sdcreg(host);
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+ BUG_ON(intmask == 0);
+
+ if (!host->cmd) {
+ pr_err("%s: Got command interrupt 0x%x even "
+ "though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), intmask);
+ return;
+ }
+
+ if (intmask & VIA_CRDR_SDSTS_CRTO)
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & VIA_CRDR_SDSTS_SC)
+ host->cmd->error = -EILSEQ;
+
+ if (host->cmd->error)
+ tasklet_schedule(&host->finish_tasklet);
+ else if (intmask & VIA_CRDR_SDSTS_CRD)
+ via_sdc_finish_command(host);
+}
+
+static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
+{
+ BUG_ON(intmask == 0);
+
+ if (intmask & VIA_CRDR_SDSTS_DT)
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
+ host->data->error = -EILSEQ;
+
+ via_sdc_finish_data(host);
+}
+
+static irqreturn_t via_sdc_isr(int irq, void *dev_id)
+{
+ struct via_crdr_mmc_host *sdhost = dev_id;
+ void __iomem *addrbase;
+ u8 pci_status;
+ u16 sd_status;
+ irqreturn_t result;
+
+ if (!sdhost)
+ return IRQ_NONE;
+
+ spin_lock(&sdhost->lock);
+
+ addrbase = sdhost->pcictrl_mmiobase;
+ pci_status = readb(addrbase + VIA_CRDR_PCIINTSTATUS);
+ if (!(pci_status & VIA_CRDR_PCIINTSTATUS_SDC)) {
+ result = IRQ_NONE;
+ goto out;
+ }
+
+ addrbase = sdhost->sdhc_mmiobase;
+ sd_status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ sd_status &= VIA_CRDR_SDSTS_INT_MASK;
+ sd_status &= ~VIA_CRDR_SDSTS_IGN_MASK;
+ if (!sd_status) {
+ result = IRQ_NONE;
+ goto out;
+ }
+
+ if (sd_status & VIA_CRDR_SDSTS_CIR) {
+ writew(sd_status & VIA_CRDR_SDSTS_CIR,
+ addrbase + VIA_CRDR_SDSTATUS);
+
+ schedule_work(&sdhost->carddet_work);
+ }
+
+ sd_status &= ~VIA_CRDR_SDSTS_CIR;
+ if (sd_status & VIA_CRDR_SDSTS_CMD_MASK) {
+ writew(sd_status & VIA_CRDR_SDSTS_CMD_MASK,
+ addrbase + VIA_CRDR_SDSTATUS);
+ via_sdc_cmd_isr(sdhost, sd_status & VIA_CRDR_SDSTS_CMD_MASK);
+ }
+ if (sd_status & VIA_CRDR_SDSTS_DATA_MASK) {
+ writew(sd_status & VIA_CRDR_SDSTS_DATA_MASK,
+ addrbase + VIA_CRDR_SDSTATUS);
+ via_sdc_data_isr(sdhost, sd_status & VIA_CRDR_SDSTS_DATA_MASK);
+ }
+
+ sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK);
+ if (sd_status) {
+ pr_err("%s: Unexpected interrupt 0x%x\n",
+ mmc_hostname(sdhost->mmc), sd_status);
+ writew(sd_status, addrbase + VIA_CRDR_SDSTATUS);
+ }
+
+ result = IRQ_HANDLED;
+
+ mmiowb();
+out:
+ spin_unlock(&sdhost->lock);
+
+ return result;
+}
+
+static void via_sdc_timeout(unsigned long ulongdata)
+{
+ struct via_crdr_mmc_host *sdhost;
+ unsigned long flags;
+
+ sdhost = (struct via_crdr_mmc_host *)ulongdata;
+
+ spin_lock_irqsave(&sdhost->lock, flags);
+
+ if (sdhost->mrq) {
+ pr_err("%s: Timeout waiting for hardware interrupt."
+ "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
+ sdhost->mrq->cmd->opcode);
+
+ if (sdhost->data) {
+ writel(VIA_CRDR_DMACTRL_SFTRST,
+ sdhost->ddma_mmiobase + VIA_CRDR_DMACTRL);
+ sdhost->data->error = -ETIMEDOUT;
+ via_sdc_finish_data(sdhost);
+ } else {
+ if (sdhost->cmd)
+ sdhost->cmd->error = -ETIMEDOUT;
+ else
+ sdhost->mrq->cmd->error = -ETIMEDOUT;
+ tasklet_schedule(&sdhost->finish_tasklet);
+ }
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&sdhost->lock, flags);
+}
+
+static void via_sdc_tasklet_finish(unsigned long param)
+{
+ struct via_crdr_mmc_host *host;
+ unsigned long flags;
+ struct mmc_request *mrq;
+
+ host = (struct via_crdr_mmc_host *)param;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ del_timer(&host->timer);
+ mrq = host->mrq;
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void via_sdc_card_detect(struct work_struct *work)
+{
+ struct via_crdr_mmc_host *host;
+ void __iomem *addrbase;
+ unsigned long flags;
+ u16 status;
+
+ host = container_of(work, struct via_crdr_mmc_host, carddet_work);
+
+ addrbase = host->ddma_mmiobase;
+ writel(VIA_CRDR_DMACTRL_SFTRST, addrbase + VIA_CRDR_DMACTRL);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ addrbase = host->pcictrl_mmiobase;
+ writeb(VIA_CRDR_PCIDMACLK_SDC, addrbase + VIA_CRDR_PCIDMACLK);
+
+ addrbase = host->sdhc_mmiobase;
+ status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
+ if (host->mrq) {
+ pr_err("%s: Card removed during transfer!\n",
+ mmc_hostname(host->mmc));
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ via_reset_pcictrl(host);
+
+ spin_lock_irqsave(&host->lock, flags);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ via_print_pcictrl(host);
+ via_print_sdchc(host);
+
+ mmc_detect_change(host->mmc, 0);
+}
+
+static void via_init_mmc_host(struct via_crdr_mmc_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ void __iomem *addrbase;
+ u32 lenreg;
+ u32 status;
+
+ init_timer(&host->timer);
+ host->timer.data = (unsigned long)host;
+ host->timer.function = via_sdc_timeout;
+
+ spin_lock_init(&host->lock);
+
+ mmc->f_min = VIA_CRDR_MIN_CLOCK;
+ mmc->f_max = VIA_CRDR_MAX_CLOCK;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED;
+ mmc->ops = &via_sdc_ops;
+
+ /*Hardware cannot do scatter lists*/
+ mmc->max_hw_segs = 1;
+ mmc->max_phys_segs = 1;
+
+ mmc->max_blk_size = VIA_CRDR_MAX_BLOCK_LENGTH;
+ mmc->max_blk_count = VIA_CRDR_MAX_BLOCK_COUNT;
+
+ mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_req_size = mmc->max_seg_size;
+
+ INIT_WORK(&host->carddet_work, via_sdc_card_detect);
+
+ tasklet_init(&host->finish_tasklet, via_sdc_tasklet_finish,
+ (unsigned long)host);
+
+ addrbase = host->sdhc_mmiobase;
+ writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+ msleep(1);
+
+ lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+ writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ status &= VIA_CRDR_SDSTS_W1C_MASK;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+ status |= VIA_CRDR_SDSTS_CFE;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+ writeb(0x0, addrbase + VIA_CRDR_SDEXTCTRL);
+
+ writel(VIA_CRDR_SDACTIVE_INTMASK, addrbase + VIA_CRDR_SDINTMASK);
+ msleep(1);
+}
+
+static int __devinit via_sd_probe(struct pci_dev *pcidev,
+ const struct pci_device_id *id)
+{
+ struct mmc_host *mmc;
+ struct via_crdr_mmc_host *sdhost;
+ u32 base, len;
+ u8 rev, gatt;
+ int ret;
+
+ pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev);
+ pr_info(DRV_NAME
+ ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
+ pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
+ (int)rev);
+
+ ret = pci_enable_device(pcidev);
+ if (ret)
+ return ret;
+
+ ret = pci_request_regions(pcidev, DRV_NAME);
+ if (ret)
+ goto disable;
+
+ pci_write_config_byte(pcidev, VIA_CRDR_PCI_WORK_MODE, 0);
+ pci_write_config_byte(pcidev, VIA_CRDR_PCI_DBG_MODE, 0);
+
+ mmc = mmc_alloc_host(sizeof(struct via_crdr_mmc_host), &pcidev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ sdhost = mmc_priv(mmc);
+ sdhost->mmc = mmc;
+ dev_set_drvdata(&pcidev->dev, sdhost);
+
+ len = pci_resource_len(pcidev, 0);
+ base = pci_resource_start(pcidev, 0);
+ sdhost->mmiobase = ioremap_nocache(base, len);
+ if (!sdhost->mmiobase) {
+ ret = -ENOMEM;
+ goto free_mmc_host;
+ }
+
+ sdhost->sdhc_mmiobase =
+ sdhost->mmiobase + VIA_CRDR_SDC_OFF;
+ sdhost->ddma_mmiobase =
+ sdhost->mmiobase + VIA_CRDR_DDMA_OFF;
+ sdhost->pcictrl_mmiobase =
+ sdhost->mmiobase + VIA_CRDR_PCICTRL_OFF;
+
+ sdhost->power = VIA_CRDR_POW_330;
+
+ gatt = VIA_CRDR_PCICLKGATT_POWSEL | VIA_CRDR_PCICLKGATT_POWOFF;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+ gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+
+ via_init_mmc_host(sdhost);
+
+ ret =
+ request_irq(pcidev->irq, via_sdc_isr, IRQF_SHARED, DRV_NAME,
+ sdhost);
+ if (ret)
+ goto unmap;
+
+ writeb(VIA_CRDR_PCIINTCTRL_SDCIRQEN,
+ sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+ writeb(VIA_CRDR_PCITMOCTRL_1024MS,
+ sdhost->pcictrl_mmiobase + VIA_CRDR_PCITMOCTRL);
+
+ mmc_add_host(mmc);
+
+ return 0;
+
+unmap:
+ iounmap(sdhost->mmiobase);
+free_mmc_host:
+ dev_set_drvdata(&pcidev->dev, NULL);
+ mmc_free_host(mmc);
+release:
+ pci_release_regions(pcidev);
+disable:
+ pci_disable_device(pcidev);
+
+ return ret;
+}
+
+static void __devexit via_sd_remove(struct pci_dev *pcidev)
+{
+ struct via_crdr_mmc_host *sdhost;
+ u8 gatt;
+
+ pr_info(DRV_NAME
+ ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
+ pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
+
+ sdhost = pci_get_drvdata(pcidev);
+
+ tasklet_kill(&sdhost->finish_tasklet);
+
+ if (&sdhost->timer)
+ del_timer_sync(&sdhost->timer);
+
+ mmc_remove_host(sdhost->mmc);
+
+ free_irq(pcidev->irq, sdhost);
+
+ writeb(0x0, sdhost->pcictrl_mmiobase + VIA_CRDR_PCIINTCTRL);
+
+ gatt = readb(sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ gatt &= ~VIA_CRDR_PCICLKGATT_POWOFF;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+
+ iounmap(sdhost->mmiobase);
+ dev_set_drvdata(&pcidev->dev, NULL);
+ mmc_free_host(sdhost->mmc);
+ pci_release_regions(pcidev);
+ pci_disable_device(pcidev);
+}
+
+#ifdef CONFIG_PM
+
+static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
+{
+ struct sdhcreg *pm_sdhcreg;
+ void __iomem *addrbase;
+ u32 lenreg;
+ u16 status;
+
+ pm_sdhcreg = &(host->pm_sdhc_reg);
+ addrbase = host->sdhc_mmiobase;
+
+ writel(0x0, addrbase + VIA_CRDR_SDINTMASK);
+
+ lenreg = VIA_CRDR_SDBLKLEN_GPIDET | VIA_CRDR_SDBLKLEN_INTEN;
+ writel(lenreg, addrbase + VIA_CRDR_SDBLKLEN);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS);
+ status &= VIA_CRDR_SDSTS_W1C_MASK;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS);
+
+ status = readw(addrbase + VIA_CRDR_SDSTATUS2);
+ status |= VIA_CRDR_SDSTS_CFE;
+ writew(status, addrbase + VIA_CRDR_SDSTATUS2);
+
+ writel(pm_sdhcreg->sdcontrol_reg, addrbase + VIA_CRDR_SDCTRL);
+ writel(pm_sdhcreg->sdcmdarg_reg, addrbase + VIA_CRDR_SDCARG);
+ writel(pm_sdhcreg->sdintmask_reg, addrbase + VIA_CRDR_SDINTMASK);
+ writel(pm_sdhcreg->sdrsptmo_reg, addrbase + VIA_CRDR_SDRSPTMO);
+ writel(pm_sdhcreg->sdclksel_reg, addrbase + VIA_CRDR_SDCLKSEL);
+ writel(pm_sdhcreg->sdextctrl_reg, addrbase + VIA_CRDR_SDEXTCTRL);
+
+ via_print_pcictrl(host);
+ via_print_sdchc(host);
+}
+
+static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
+{
+ struct via_crdr_mmc_host *host;
+ int ret = 0;
+
+ host = pci_get_drvdata(pcidev);
+
+ via_save_pcictrlreg(host);
+ via_save_sdcreg(host);
+
+ ret = mmc_suspend_host(host->mmc, state);
+
+ pci_save_state(pcidev);
+ pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
+ pci_disable_device(pcidev);
+ pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+
+ return ret;
+}
+
+static int via_sd_resume(struct pci_dev *pcidev)
+{
+ struct via_crdr_mmc_host *sdhost;
+ int ret = 0;
+ u8 gatt;
+
+ sdhost = pci_get_drvdata(pcidev);
+
+ gatt = VIA_CRDR_PCICLKGATT_POWOFF;
+ if (sdhost->power == VIA_CRDR_POW_330)
+ gatt |= VIA_CRDR_PCICLKGATT_POWSEL;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+ gatt |= VIA_CRDR_PCICLKGATT_SFTRST;
+ writeb(gatt, sdhost->pcictrl_mmiobase + VIA_CRDR_PCICLKGATT);
+ msleep(3);
+
+ msleep(100);
+
+ pci_set_power_state(pcidev, PCI_D0);
+ pci_restore_state(pcidev);
+ ret = pci_enable_device(pcidev);
+ if (ret)
+ return ret;
+
+ via_restore_pcictrlreg(sdhost);
+ via_init_sdc_pm(sdhost);
+
+ ret = mmc_resume_host(sdhost->mmc);
+
+ return ret;
+}
+
+#else /* CONFIG_PM */
+
+#define via_sd_suspend NULL
+#define via_sd_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver via_sd_driver = {
+ .name = DRV_NAME,
+ .id_table = via_ids,
+ .probe = via_sd_probe,
+ .remove = __devexit_p(via_sd_remove),
+ .suspend = via_sd_suspend,
+ .resume = via_sd_resume,
+};
+
+static int __init via_sd_drv_init(void)
+{
+ pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
+ "(C) 2008 VIA Technologies, Inc.\n");
+
+ return pci_register_driver(&via_sd_driver);
+}
+
+static void __exit via_sd_drv_exit(void)
+{
+ pci_unregister_driver(&via_sd_driver);
+}
+
+module_init(via_sd_drv_init);
+module_exit(via_sd_drv_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("VIA Technologies Inc.");
+MODULE_DESCRIPTION("VIA SD/MMC Card Interface driver");
--
1.6.3.1
On Fri, 12 Jun 2009 15:59:30 +0800
Harald Welte <[email protected]> wrote:
> +
> +#define MMC_STOP_TRANSMISSION 12
This define is no longer used.
> + /* It seems that our DMA can not work normally with 375kHz clock */
> + /* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */
> + addrbase = host->pcictrl_mmiobase;
> + if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) {
> + dev_info(host->mmc->parent, "forcing card speed to 8MHz\n");
> + writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK);
> + }
This is pretty nasty. Please see if you can provide a workaround some
time soon.
> + if (ios->power_mode != MMC_POWER_OFF)
> + via_sdc_set_power(host, ios->vdd);
What if we actually do need to power off?
> +static void __devexit via_sd_remove(struct pci_dev *pcidev)
> +{
> + struct via_crdr_mmc_host *sdhost;
> + u8 gatt;
> +
> + pr_info(DRV_NAME
> + ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
> + pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
> +
> + sdhost = pci_get_drvdata(pcidev);
> +
> + tasklet_kill(&sdhost->finish_tasklet);
> +
> + if (&sdhost->timer)
> + del_timer_sync(&sdhost->timer);
> +
> + mmc_remove_host(sdhost->mmc);
> +
You need to do the removal as the first step and you might need to
explicitly kill any ongoing requests.
Rgds
--
-- Pierre Ossman
WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.
Hi Pierre,
as usual, thanks for your review+comments.
On Sat, Jun 13, 2009 at 01:43:28PM +0200, Pierre Ossman wrote:
> On Fri, 12 Jun 2009 15:59:30 +0800
> Harald Welte <[email protected]> wrote:
>
> > +
> > +#define MMC_STOP_TRANSMISSION 12
>
> This define is no longer used.
thanks, removed.
> > + /* It seems that our DMA can not work normally with 375kHz clock */
> > + /* FIXME: don't brute-force 8MHz but use PIO at 375kHz !! */
> > + addrbase = host->pcictrl_mmiobase;
> > + if (readb(addrbase + VIA_CRDR_PCISDCCLK) == PCI_CLK_375K) {
> > + dev_info(host->mmc->parent, "forcing card speed to 8MHz\n");
> > + writeb(PCI_CLK_8M, addrbase + VIA_CRDR_PCISDCCLK);
> > + }
>
> This is pretty nasty. Please see if you can provide a workaround some
> time soon.
yes, I'm looking into this, definitely. Will need some
experimentation/testing, but I'll submit an incremental fix ASAP.
> > + if (ios->power_mode != MMC_POWER_OFF)
> > + via_sdc_set_power(host, ios->vdd);
>
> What if we actually do need to power off?
I see. Good spot. It seems like we actually leave the power on,
and instread only switch the clock off:
> if (ios->power_mode == MMC_POWER_OFF)
> org_data &= ~VIA_CRDR_SDMODE_POWER;
> else
> org_data |= VIA_CRDR_SDMODE_POWER;
according to the (public) docs, this bit is not about power but about
clock gating. I have renamed it to SDMODE_CLK_ON to make it more clear.
> > +static void __devexit via_sd_remove(struct pci_dev *pcidev)
> > +{
> > + struct via_crdr_mmc_host *sdhost;
> > + u8 gatt;
> > +
> > + pr_info(DRV_NAME
> > + ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
> > + pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
> > +
> > + sdhost = pci_get_drvdata(pcidev);
> > +
> > + tasklet_kill(&sdhost->finish_tasklet);
> > +
> > + if (&sdhost->timer)
> > + del_timer_sync(&sdhost->timer);
> > +
> > + mmc_remove_host(sdhost->mmc);
> > +
>
> You need to do the removal as the first step
Thanks, I've fixed this in my tree.
Looking at other drivers, imxmmc seems to get this wrong, too.
> and you might need to explicitly kill any ongoing requests.
you mean something like the snippet in sdhci.c:
======
if (dead) {
spin_lock_irqsave(&host->lock, flags);
host->flags |= SDHCI_DEVICE_DEAD;
if (host->mrq) {
printk(KERN_ERR "%s: Controller removed during "
" transfer!\n", mmc_hostname(host->mmc));
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
}
spin_unlock_irqrestore(&host->lock, flags);
}
======
Why is sdhci about the only driver that does it? What decides if we need
to kill ongoing requests or not?
Also, you stated that mmc_remove_host needs to be the first step. However,
sdhci first kills the ongoing rquest (if "dead"), and then removes the host.
--
- Harald Welte <[email protected]> http://linux.via.com.tw/
============================================================================
VIA Free and Open Source Software Liaison
On Sun, 14 Jun 2009 14:52:56 +0800
Harald Welte <[email protected]> wrote:
> >
> > You need to do the removal as the first step
>
> Thanks, I've fixed this in my tree.
>
> Looking at other drivers, imxmmc seems to get this wrong, too.
>
Quite right. I suppose someone should have a look at that...
> > and you might need to explicitly kill any ongoing requests.
>
> you mean something like the snippet in sdhci.c:
> ======
> if (dead) {
> spin_lock_irqsave(&host->lock, flags);
>
> host->flags |= SDHCI_DEVICE_DEAD;
>
> if (host->mrq) {
> printk(KERN_ERR "%s: Controller removed during "
> " transfer!\n", mmc_hostname(host->mmc));
>
> host->mrq->cmd->error = -ENOMEDIUM;
> tasklet_schedule(&host->finish_tasklet);
> }
>
> spin_unlock_irqrestore(&host->lock, flags);
> }
> ======
>
> Why is sdhci about the only driver that does it? What decides if we need
> to kill ongoing requests or not?
>
I guess I haven't kept an eye on it so the others are simply buggy.
> Also, you stated that mmc_remove_host needs to be the first step. However,
> sdhci first kills the ongoing rquest (if "dead"), and then removes the host.
>
Right, because the reason you need to end the request is that failure
to do so will wedge the MMC system and mmc_remove_host() will never
return.
Normally the requests will eventually be completed by interrupts coming
from the hardware, but if it got removed then that might not happen.
Rgds
--
-- Pierre Ossman
WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.
On Sun, Jun 14, 2009 at 12:55:37PM +0200, Pierre Ossman wrote:
> > Also, you stated that mmc_remove_host needs to be the first step. However,
> > sdhci first kills the ongoing rquest (if "dead"), and then removes the host.
>
> Right, because the reason you need to end the request is that failure
> to do so will wedge the MMC system and mmc_remove_host() will never
> return.
>
> Normally the requests will eventually be completed by interrupts coming
> from the hardware, but if it got removed then that might not happen.
Ok, I will copy+paste the snippet from sdhci.c and do some testing, both
removing the card while continuously issuing requests, as well as removing the
driver while doing that.
Will submit the result again in two days or so.
--
- Harald Welte <[email protected]> http://linux.via.com.tw/
============================================================================
VIA Free and Open Source Software Liaison