LinuxLists.cc - 2.6.39-rc6: SATA hangs for a few seconds during boot

2011-05-09 20:48:06

Subject: 2.6.39-rc6: SATA hangs for a few seconds during boot

Hi,

I get a hanging SATA port for a few seconds during boot, with these
kernel messages:

ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: both IDENTIFYs aborted, assuming NODEV
ata1.00: revalidation failed (errno=-2)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete

This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
without any suspend actions. The hardware is a ThinkPad X61s:

00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)

Complete dmesg is attached.

Regards,
Tino

Attachments:

(No filename) (1.56 kB)
dmesg.xz (9.50 kB)
Download all attachments

2011-05-11 16:10:37

by Tino Keitel

[permalink] [raw]

Subject: Re: 2.6.39-rc6: SATA hangs for a few seconds during boot

On Mon, May 09, 2011 at 22:48:01 +0200, Tino Keitel wrote:
> Hi,
>
> I get a hanging SATA port for a few seconds during boot, with these
> kernel messages:
>
> ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
> ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: both IDENTIFYs aborted, assuming NODEV
> ata1.00: revalidation failed (errno=-2)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: configured for UDMA/133
> ata1.00: device reported invalid CHS sector 0
> ata1.00: device reported invalid CHS sector 0
> ata1: EH complete
>
> This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
> without any suspend actions. The hardware is a ThinkPad X61s:

Hi,

I tried again with vanilla 2.6.39-rc7 and got the same hang:

ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
ata1.00: cmd 60/02:00:a5:80:07/00:00:00:00:00/40 tag 0 ncq 1024 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: cmd 60/02:08:fd:5d:03/00:00:00:00:00/40 tag 1 ncq 1024 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: both IDENTIFYs aborted, assuming NODEV
ata1.00: revalidation failed (errno=-2)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete

I also attached the config file.

Regards,
Tino

Attachments:

(No filename) (2.84 kB)
config.xz (14.24 kB)
Download all attachments

2011-05-11 19:33:15

by Maciej Rutecki

[permalink] [raw]

Subject: Re: 2.6.39-rc6: SATA hangs for a few seconds during boot

I created a Bugzilla entry at
https://bugzilla.kernel.org/show_bug.cgi?id=34952
for your bug report, please add your address to the CC list in there, thanks!

On poniedziałek, 9 maja 2011 o 22:48:01 Tino Keitel wrote:
> Hi,
>
> I get a hanging SATA port for a few seconds during boot, with these
> kernel messages:
>
> ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
> ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: both IDENTIFYs aborted, assuming NODEV
> ata1.00: revalidation failed (errno=-2)
> ata1: hard resetting link
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
> ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
> ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
> ata1.00: configured for UDMA/133
> ata1.00: device reported invalid CHS sector 0
> ata1.00: device reported invalid CHS sector 0
> ata1: EH complete
>
> This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
> without any suspend actions. The hardware is a ThinkPad X61s:
>
> 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
> SATA AHCI Controller (rev 03)
>
> Complete dmesg is attached.
>
> Regards,
> Tino

--
Maciej Rutecki
http://www.maciek.unixy.pl