2012-10-29 22:16:42

by Antonio Ospite

Subject: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8

Hi,

I am experiencing a bug with nouveau with linux-3.7-rc3 (and since rc1),
my video adapter is the one integrated on the MSI M3N78-VM motherboard
(hence x86_64):

02:00.0 VGA compatible controller: NVIDIA Corporation C77 [GeForce 8200] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 82f2
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (64-bit, prefetchable) [size=128M]
Memory at fa000000 (64-bit, prefetchable) [size=32M]
I/O ports at ec00 [size=128]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: nouveau

The problem presents itself as soon as I use a gnome-shell session from
gdm3, if I use the fall-back mode (gnome-panel) it does not happen
immediately, until maybe some processes do something stressful (firefox
triggered it twice).

Here is the kernel trace, please let me know if the disassembled
nouveau.o —or any other information— is necessary:

[ 1943.858601] BUG: unable to handle kernel paging request at fffffffffffffff8
[ 1943.858669] IP: [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
[ 1943.858779] PGD 160d067 PUD 160e067 PMD 0
[ 1943.858803] Oops: 0000 [#1] SMP
[ 1943.858823] Modules linked in: hidp ebtable_nat ebtables cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace ipt_MASQUERADE xt_CHECKSUM bridge stp llc ppdev lp bnep rfcomm tun sit tunnel4 binfmt_misc uinput ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip6table_raw ip6table_mangle ip6t_REJECT xt_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6t_rt ip6table_filter ip6_tables xt_tcpudp ipt_REJECT ipt_ULOG xt_limit xt_multiport xt_conntrack iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ip_tables x_tables hwmon_vid loop fuse snd_hda_codec_hdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc nouveau snd_seq_midi snd_seq_midi_event powernow_k8 snd_rawmidi snd_seq kvm_amd snd_seq_device kvm snd_timer ttm snd edac_mce_amd btusb drm_kms_helper bluetooth edac_core drm rfkill i2c_algo_bit
mxm_wmi shpchp asus_atk0110 soundcore crc16 k8temp evdev pcspkr parport_pc parport video wmi processor thermal_sys i2c_nforce2 i2c_core button ext3 mbcache jbd dm_mod sg hid_generic sr_mod sd_mod cdrom crc_t10dif usbhid usb_storage hid uas ohci_hcd ahci libahci libata ehci_hcd forcedeth scsi_mod usbcore usb_common floppy
[ 1943.859565] CPU 0
[ 1943.859580] Pid: 2985, comm: Xorg Not tainted 3.7.0-rc3-ao2 #1 System manufacturer System Product Name/M3N78-VM
[ 1943.859609] RIP: 0010:[<ffffffffa031a67a>] [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
[ 1943.859670] RSP: 0018:ffff8801179519a8 EFLAGS: 00010212
[ 1943.859687] RAX: 00000000ffffffff RBX: fffffffffffffff0 RCX: 000000000000007e
[ 1943.859708] RDX: 000000000000007e RSI: 0000000000000001 RDI: ffff880117bfbce8
[ 1943.859728] RBP: ffff88011785fd38 R08: 0000000000000000 R09: ffff88011785fd38
[ 1943.859748] R10: ffff880117bfbc00 R11: ffff88011785fc80 R12: 000000000000007e
[ 1943.859769] R13: ffff880117bfbc01 R14: ffff880117bfbc20 R15: ffff880117951a70
[ 1943.859791] FS: 00007f1099383880(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
[ 1943.859813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1943.859830] CR2: fffffffffffffff8 CR3: 0000000118473000 CR4: 00000000000007f0
[ 1943.859850] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1943.859870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1943.859891] Process Xorg (pid: 2985, threadinfo ffff880117950000, task ffff8801181cc8e0)
[ 1943.859911] Stack:
[ 1943.859920] 0000000000000246 ffffffff810fa13d ffffffff81060f13 00000000000003f0
[ 1943.859955] 0000000000000002 0000000000000010 ffff880117bfbc00 ffff880117bfbc20
[ 1943.859986] ffff880117951a70 ffffffffa032a10a ffff880100000000 000003f000000008
[ 1943.860018] Call Trace:
[ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
[ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
[ 1943.860019] [<ffffffffa032a10a>] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau]
[ 1943.860019] [<ffffffffa03687b6>] ? nouveau_vram_manager_new+0x62/0xa4 [nouveau]
[ 1943.860019] [<ffffffffa0294334>] ? ttm_bo_handle_move_mem+0x1ab/0x2ec [ttm]
[ 1943.860019] [<ffffffffa0294d34>] ? ttm_bo_mem_space+0x112/0x2f8 [ttm]
[ 1943.860019] [<ffffffffa0294fbd>] ? ttm_bo_move_buffer+0xa3/0xee [ttm]
[ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
[ 1943.860019] [<ffffffffa02950ae>] ? ttm_bo_validate+0xa6/0xeb [ttm]
[ 1943.860019] [<ffffffffa0295466>] ? ttm_bo_init+0x373/0x3b2 [ttm]
[ 1943.860019] [<ffffffffa036a021>] ? nouveau_bo_new+0x23f/0x264 [nouveau]
[ 1943.860019] [<ffffffffa0369c55>] ? nouveau_ttm_tt_unpopulate+0xa3/0xa3 [nouveau]
[ 1943.860019] [<ffffffffa036b77a>] ? nouveau_gem_new+0x53/0xf7 [nouveau]
[ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
[ 1943.860019] [<ffffffff8137031a>] ? _cond_resched+0x6/0x1b
[ 1943.860019] [<ffffffffa036b8bd>] ? nouveau_gem_ioctl_new+0x9f/0x107 [nouveau]
[ 1943.860019] [<ffffffffa022507b>] ? drm_gem_flink_ioctl+0xc1/0xde [drm]
[ 1943.860019] [<ffffffffa0223603>] ? drm_ioctl+0x28c/0x36a [drm]
[ 1943.860019] [<ffffffff810dfe6e>] ? handle_pte_fault+0x6ff/0x770
[ 1943.860019] [<ffffffffa036b81e>] ? nouveau_gem_new+0xf7/0xf7 [nouveau]
[ 1943.860019] [<ffffffff81373f12>] ? __do_page_fault+0x2d8/0x376
[ 1943.860019] [<ffffffff8110eb82>] ? vfs_ioctl+0x1e/0x31
[ 1943.860019] [<ffffffff8110f3ba>] ? do_vfs_ioctl+0x3ee/0x430
[ 1943.860019] [<ffffffff8110289c>] ? vfs_read+0xac/0xf5
[ 1943.860019] [<ffffffff8110f449>] ? sys_ioctl+0x4d/0x7c
[ 1943.860019] [<ffffffff81376129>] ? system_call_fastpath+0x16/0x1b
[ 1943.860019] Code: 44 89 c0 41 56 f7 d0 41 55 41 88 f5 41 54 41 89 d4 55 4c 89 cd 53 48 83 ec 18 48 8b 5f 10 89 44 24 0c 48 83 eb 10 e9 da 00 00 00 <48> 8b 43 08 44 8b 53 34 44 8b 7b 38 48 39 f8 45 89 d3 47 8d 0c
[ 1943.860019] RIP [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
[ 1943.860019] RSP <ffff8801179519a8>
[ 1943.860019] CR2: fffffffffffffff8
[ 1943.860019] ---[ end trace cbc160afe55cb77d ]---
[ 1945.878352] nouveau E[ DRM] EvoCh 1 Mthd 0x0080 Data 0x00000000 (0x000b 0x05)
[ 1945.880013] [sched_delayed] sched: RT throttling activated

Thanks,
Antonio

--
Antonio Ospite
http://ao2.it

A: Because it messes up the order in which people normally read text.
See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?

2012-10-30 05:18:52

by Ben Skeggs

Subject: Re: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8

On Mon, 2012-10-29 at 23:16 +0100, Antonio Ospite wrote:
> Hi,
>
> I am experiencing a bug with nouveau with linux-3.7-rc3 (and since rc1),
> my video adapter is the one integrated on the MSI M3N78-VM motherboard
> (hence x86_64):
>
> 02:00.0 VGA compatible controller: NVIDIA Corporation C77 [GeForce 8200] (rev a2) (prog-if 00 [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Device 82f2
> Flags: bus master, fast devsel, latency 0, IRQ 21
> Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Memory at f0000000 (64-bit, prefetchable) [size=128M]
> Memory at fa000000 (64-bit, prefetchable) [size=32M]
> I/O ports at ec00 [size=128]
> Expansion ROM at febe0000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Kernel driver in use: nouveau
>
> The problem presents itself as soon as I use a gnome-shell session from
> gdm3, if I use the fall-back mode (gnome-panel) it does not happen
> immediately, until maybe some processes do something stressful (firefox
> triggered it twice).
If you boot into fallback mode and run glxgears (or whatever, some 3d
app) does this happen too?

>
> Here is the kernel trace, please let me know if the disassembled
> nouveau.o —or any other information— is necessary:
Are you able to post me your entire kernel log from before this happens?

Thanks,
Ben.

>
> [ 1943.858601] BUG: unable to handle kernel paging request at fffffffffffffff8
> [ 1943.858669] IP: [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
> [ 1943.858779] PGD 160d067 PUD 160e067 PMD 0
> [ 1943.858803] Oops: 0000 [#1] SMP
> [ 1943.858823] Modules linked in: hidp ebtable_nat ebtables cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace ipt_MASQUERADE xt_CHECKSUM bridge stp llc ppdev lp bnep rfcomm tun sit tunnel4 binfmt_misc uinput ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip6table_raw ip6table_mangle ip6t_REJECT xt_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6t_rt ip6table_filter ip6_tables xt_tcpudp ipt_REJECT ipt_ULOG xt_limit xt_multiport xt_conntrack iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ip_tables x_tables hwmon_vid loop fuse snd_hda_codec_hdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc nouveau snd_seq_midi snd_seq_midi_event powernow_k8 snd_rawmidi snd_seq kvm_amd snd_seq_device kvm snd_timer ttm snd edac_mce_amd btusb drm_kms_helper bluetooth edac_core drm rfkill i2c!
_a!
> lgo_bit
> mxm_wmi shpchp asus_atk0110 soundcore crc16 k8temp evdev pcspkr parport_pc parport video wmi processor thermal_sys i2c_nforce2 i2c_core button ext3 mbcache jbd dm_mod sg hid_generic sr_mod sd_mod cdrom crc_t10dif usbhid usb_storage hid uas ohci_hcd ahci libahci libata ehci_hcd forcedeth scsi_mod usbcore usb_common floppy
> [ 1943.859565] CPU 0
> [ 1943.859580] Pid: 2985, comm: Xorg Not tainted 3.7.0-rc3-ao2 #1 System manufacturer System Product Name/M3N78-VM
> [ 1943.859609] RIP: 0010:[<ffffffffa031a67a>] [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
> [ 1943.859670] RSP: 0018:ffff8801179519a8 EFLAGS: 00010212
> [ 1943.859687] RAX: 00000000ffffffff RBX: fffffffffffffff0 RCX: 000000000000007e
> [ 1943.859708] RDX: 000000000000007e RSI: 0000000000000001 RDI: ffff880117bfbce8
> [ 1943.859728] RBP: ffff88011785fd38 R08: 0000000000000000 R09: ffff88011785fd38
> [ 1943.859748] R10: ffff880117bfbc00 R11: ffff88011785fc80 R12: 000000000000007e
> [ 1943.859769] R13: ffff880117bfbc01 R14: ffff880117bfbc20 R15: ffff880117951a70
> [ 1943.859791] FS: 00007f1099383880(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
> [ 1943.859813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 1943.859830] CR2: fffffffffffffff8 CR3: 0000000118473000 CR4: 00000000000007f0
> [ 1943.859850] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 1943.859870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 1943.859891] Process Xorg (pid: 2985, threadinfo ffff880117950000, task ffff8801181cc8e0)
> [ 1943.859911] Stack:
> [ 1943.859920] 0000000000000246 ffffffff810fa13d ffffffff81060f13 00000000000003f0
> [ 1943.859955] 0000000000000002 0000000000000010 ffff880117bfbc00 ffff880117bfbc20
> [ 1943.859986] ffff880117951a70 ffffffffa032a10a ffff880100000000 000003f000000008
> [ 1943.860018] Call Trace:
> [ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
> [ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
> [ 1943.860019] [<ffffffffa032a10a>] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau]
> [ 1943.860019] [<ffffffffa03687b6>] ? nouveau_vram_manager_new+0x62/0xa4 [nouveau]
> [ 1943.860019] [<ffffffffa0294334>] ? ttm_bo_handle_move_mem+0x1ab/0x2ec [ttm]
> [ 1943.860019] [<ffffffffa0294d34>] ? ttm_bo_mem_space+0x112/0x2f8 [ttm]
> [ 1943.860019] [<ffffffffa0294fbd>] ? ttm_bo_move_buffer+0xa3/0xee [ttm]
> [ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
> [ 1943.860019] [<ffffffffa02950ae>] ? ttm_bo_validate+0xa6/0xeb [ttm]
> [ 1943.860019] [<ffffffffa0295466>] ? ttm_bo_init+0x373/0x3b2 [ttm]
> [ 1943.860019] [<ffffffffa036a021>] ? nouveau_bo_new+0x23f/0x264 [nouveau]
> [ 1943.860019] [<ffffffffa0369c55>] ? nouveau_ttm_tt_unpopulate+0xa3/0xa3 [nouveau]
> [ 1943.860019] [<ffffffffa036b77a>] ? nouveau_gem_new+0x53/0xf7 [nouveau]
> [ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
> [ 1943.860019] [<ffffffff8137031a>] ? _cond_resched+0x6/0x1b
> [ 1943.860019] [<ffffffffa036b8bd>] ? nouveau_gem_ioctl_new+0x9f/0x107 [nouveau]
> [ 1943.860019] [<ffffffffa022507b>] ? drm_gem_flink_ioctl+0xc1/0xde [drm]
> [ 1943.860019] [<ffffffffa0223603>] ? drm_ioctl+0x28c/0x36a [drm]
> [ 1943.860019] [<ffffffff810dfe6e>] ? handle_pte_fault+0x6ff/0x770
> [ 1943.860019] [<ffffffffa036b81e>] ? nouveau_gem_new+0xf7/0xf7 [nouveau]
> [ 1943.860019] [<ffffffff81373f12>] ? __do_page_fault+0x2d8/0x376
> [ 1943.860019] [<ffffffff8110eb82>] ? vfs_ioctl+0x1e/0x31
> [ 1943.860019] [<ffffffff8110f3ba>] ? do_vfs_ioctl+0x3ee/0x430
> [ 1943.860019] [<ffffffff8110289c>] ? vfs_read+0xac/0xf5
> [ 1943.860019] [<ffffffff8110f449>] ? sys_ioctl+0x4d/0x7c
> [ 1943.860019] [<ffffffff81376129>] ? system_call_fastpath+0x16/0x1b
> [ 1943.860019] Code: 44 89 c0 41 56 f7 d0 41 55 41 88 f5 41 54 41 89 d4 55 4c 89 cd 53 48 83 ec 18 48 8b 5f 10 89 44 24 0c 48 83 eb 10 e9 da 00 00 00 <48> 8b 43 08 44 8b 53 34 44 8b 7b 38 48 39 f8 45 89 d3 47 8d 0c
> [ 1943.860019] RIP [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
> [ 1943.860019] RSP <ffff8801179519a8>
> [ 1943.860019] CR2: fffffffffffffff8
> [ 1943.860019] ---[ end trace cbc160afe55cb77d ]---
> [ 1945.878352] nouveau E[ DRM] EvoCh 1 Mthd 0x0080 Data 0x00000000 (0x000b 0x05)
> [ 1945.880013] [sched_delayed] sched: RT throttling activated
>
> Thanks,
> Antonio
>

2012-10-30 09:30:28

by Antonio Ospite

Subject: Re: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8

On Tue, 30 Oct 2012 15:17:21 +1000
Ben Skeggs <[email protected]> wrote:

> On Mon, 2012-10-29 at 23:16 +0100, Antonio Ospite wrote:

[...]
> > The problem presents itself as soon as I use a gnome-shell session from
> > gdm3, if I use the fall-back mode (gnome-panel) it does not happen
> > immediately, until maybe some processes do something stressful (firefox
> > triggered it twice).
> If you boot into fallback mode and run glxgears (or whatever, some 3d
> app) does this happen too?

It does: as soon as I run glxgears the driver crashes.

> > Here is the kernel trace, please let me know if the disassembled
> > nouveau.o —or any other information— is necessary:
> Are you able to post me your entire kernel log from before this happens?

I am pasting it below, I noticed in particular the line:

nouveau [ DRM] allocated 1024x768 fb: 0x50000, bo ffff88011a025800

I am setting video=1024x768 in the kernel command line because without
any resolution set nouveau and my monitor do not get along, but then in
Xorg I am using a bigger resolution, this setup works fine in 3.5 tho
so maybe it's not that.

Full kernel log from boot to crash:

imklog 5.8.11, log source = /proc/kmsg started.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0-rc3-ao2 (ao2@jcn) (gcc version 4.7.2 (Debian 4.7.2-4) ) #1 SMP Mon Oct 29 13:14:36 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc3-ao2 root=UUID=614c68fd-bd5f-4627-9f62-1f0cada81683 ro quiet video=1024x768
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e3000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffedfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M3N78-VM, BIOS 1801 09/10/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcff8ffff]
[ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff8ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcff8ffff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x11fffffff @ [mem 0xcff8e000-0xcff8ffff]
[ 0.000000] RAMDISK: [mem 0x368de000-0x37466fff]
[ 0.000000] ACPI: RSDP 00000000000fb630 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 0006C (v01 091010 XSDT1648 20100910 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 091010 FACP1648 20100910 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90460 0AF17 (v01 A1041 A1041000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff9e000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 00090 (v01 091010 APIC1648 20100910 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 091010 OEMMCFG 20100910 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 091010 OEMB1648 20100910 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cff9b380 000B8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cff9b440 00038 (v01 091010 OEMHPET0 20100910 MSFT 00000097)
[ 0.000000] ACPI: INFO 00000000cff9e0c0 00124 (v01 091010 AMDINFO 20100910 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000cff9e1f0 00284 (v01 091010 NVHDCP 20100910 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9b480 00178 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[ 0.000000] NODE_DATA [mem 0x11fffc000-0x11fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ba00000-ffff88011effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
[ 0.000000] On node 0 totalpages: 982813
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 5 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000
[ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000
[ 0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83776 r8192 d22720 u262144
[ 0.000000] pcpu-alloc: s83776 r8192 d22720 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966679
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc3-ao2 root=UUID=614c68fd-bd5f-4627-9f62-1f0cada81683 ro quiet video=1024x768
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3723324k/4718592k available (3558k kernel code, 787340k absent, 207928k reserved, 3159k data, 616k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:33024 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2814.255 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.51 BogoMIPS (lpj=11257020)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.004052] AppArmor: AppArmor disabled by boot time parameter
[ 0.004341] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009246] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010307] Mount-cache hash table entries: 256
[ 0.010522] Initializing cgroup subsys cpuacct
[ 0.010525] Initializing cgroup subsys devices
[ 0.010526] Initializing cgroup subsys freezer
[ 0.010528] Initializing cgroup subsys net_cls
[ 0.010530] Initializing cgroup subsys blkio
[ 0.010531] Initializing cgroup subsys perf_event
[ 0.010558] tseg: 0000000000
[ 0.010572] mce: CPU supports 5 MCE banks
[ 0.010581] LVT offset 0 assigned for vector 0xf9
[ 0.010585] process: using AMD E400 aware idle routine
[ 0.010588] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010588] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.010588] tlb_flushall_shift: 4
[ 0.012719] ACPI: Core revision 20120913
[ 0.017978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057675] smpboot: CPU0: AMD Athlon(tm) Processor LE-1660 (fam: 0f, model: 7f, stepping: 02)
[ 0.060000] Performance Events: AMD PMU driver.
[ 0.060000] ... version: 0
[ 0.060000] ... bit width: 48
[ 0.060000] ... generic registers: 4
[ 0.060000] ... value mask: 0000ffffffffffff
[ 0.060000] ... max period: 00007fffffffffff
[ 0.060000] ... fixed-purpose events: 0
[ 0.060000] ... event mask: 000000000000000f
[ 0.060000] Brought up 1 CPUs
[ 0.060000] smpboot: Total of 1 processors activated (5628.51 BogoMIPS)
[ 0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060000] devtmpfs: initialized
[ 0.060000] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
[ 0.060000] regulator-dummy: no parameters
[ 0.060000] NET: Registered protocol family 16
[ 0.060000] node 0 link 0: io port [5000, ffffff]
[ 0.060000] node 0 link 0: io port [1000, 1fff]
[ 0.060000] TOM: 00000000e0000000 aka 3584M
[ 0.060000] node 0 link 0: mmio [e0000000, efffffff]
[ 0.060000] node 0 link 0: mmio [a0000, bffff]
[ 0.060000] node 0 link 0: mmio [e0000000, fe0bffff]
[ 0.060000] TOM2: 0000000120000000 aka 4608M
[ 0.060000] bus: [bus 00-07] on node 0 link 0
[ 0.060000] bus: 00 [io 0x2000-0xffff]
[ 0.060000] bus: 00 [io 0x0000-0x1fff]
[ 0.060000] bus: 00 [mem 0xe0000000-0xffffffff]
[ 0.060000] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.060000] bus: 00 [mem 0x120000000-0xfcffffffff]
[ 0.060000] ACPI: bus type pci registered
[ 0.060062] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.060064] PCI: not using MMCONFIG
[ 0.060065] PCI: Using configuration type 1 for base access
[ 0.060789] bio: create slab <bio-0> at 0
[ 0.060866] ACPI: Added _OSI(Module Device)
[ 0.060868] ACPI: Added _OSI(Processor Device)
[ 0.060870] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.060871] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.061912] ACPI: EC: Look up EC in DSDT
[ 0.063357] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.067945] ACPI: Interpreter enabled
[ 0.067950] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.067969] ACPI: Using IOAPIC for interrupt routing
[ 0.068011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.069584] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.092280] ACPI: No dock devices found.
[ 0.092286] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.092508] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.092702] PCI host bridge to bus 0000:00
[ 0.092705] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.092708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.092711] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.092713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.092716] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.092718] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff]
[ 0.092752] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
[ 0.093010] pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
[ 0.093017] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.093053] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
[ 0.093064] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.093079] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.093085] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.093114] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.093130] pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
[ 0.093179] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
[ 0.093195] pci 0000:00:01.3: reg 10: [mem 0xfcf80000-0xfcffffff]
[ 0.093308] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
[ 0.093378] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
[ 0.093386] pci 0000:00:02.0: reg 10: [mem 0xfcf7e000-0xfcf7efff]
[ 0.093419] pci 0000:00:02.0: supports D1 D2
[ 0.093422] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093436] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
[ 0.093446] pci 0000:00:02.1: reg 10: [mem 0xfcf7fc00-0xfcf7fcff]
[ 0.093487] pci 0000:00:02.1: supports D1 D2
[ 0.093489] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093509] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
[ 0.093518] pci 0000:00:04.0: reg 10: [mem 0xfcf7d000-0xfcf7dfff]
[ 0.093551] pci 0000:00:04.0: supports D1 D2
[ 0.093553] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093568] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
[ 0.093578] pci 0000:00:04.1: reg 10: [mem 0xfcf7f800-0xfcf7f8ff]
[ 0.093618] pci 0000:00:04.1: supports D1 D2
[ 0.093620] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093644] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
[ 0.093654] pci 0000:00:07.0: reg 10: [mem 0xfcf78000-0xfcf7bfff]
[ 0.093695] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.093711] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
[ 0.093751] pci 0000:00:09.0: [10de:0ad4] type 00 class 0x010601
[ 0.093760] pci 0000:00:09.0: reg 10: [io 0xd480-0xd487]
[ 0.093764] pci 0000:00:09.0: reg 14: [io 0xd400-0xd403]
[ 0.093769] pci 0000:00:09.0: reg 18: [io 0xd080-0xd087]
[ 0.093773] pci 0000:00:09.0: reg 1c: [io 0xd000-0xd003]
[ 0.093778] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.093782] pci 0000:00:09.0: reg 24: [mem 0xfcf76000-0xfcf77fff]
[ 0.093815] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
[ 0.093825] pci 0000:00:0a.0: reg 10: [mem 0xfcf7c000-0xfcf7cfff]
[ 0.093829] pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887]
[ 0.093834] pci 0000:00:0a.0: reg 18: [mem 0xfcf7f400-0xfcf7f4ff]
[ 0.093838] pci 0000:00:0a.0: reg 1c: [mem 0xfcf7f000-0xfcf7f00f]
[ 0.093868] pci 0000:00:0a.0: supports D1 D2
[ 0.093870] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093886] pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400
[ 0.093910] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.093966] pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
[ 0.094187] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.094279] pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
[ 0.094498] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.094551] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.094568] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.094582] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.094596] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.094656] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.094661] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.094664] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.094666] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.094669] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.094671] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
[ 0.094693] pci 0000:02:00.0: [10de:0849] type 00 class 0x030000
[ 0.094701] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.094707] pci 0000:02:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.094713] pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.094717] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.094722] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[ 0.094748] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.094752] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.094754] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.094758] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.094905] pci 0000:00:10.0: PCI bridge to [bus 03]
[ 0.095082] pci 0000:00:12.0: PCI bridge to [bus 04]
[ 0.095139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.095401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.095459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.095498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[ 0.095535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.095691] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.095905] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.095906] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.105864] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.105976] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.106088] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.106199] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.106312] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.106421] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.106531] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.106642] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.106752] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.106862] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.106972] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.107082] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.107195] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.107304] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.107414] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.107524] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.107634] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[ 0.107745] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.107855] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.107966] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.108091] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.108201] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.108312] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.108422] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.108532] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.108642] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.108752] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.108863] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.108973] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.109083] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.109194] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.109304] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.109414] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.109526] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.109638] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.109748] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.109863] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.109975] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.110088] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.110201] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.110321] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[ 0.110434] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.110546] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14
[ 0.110659] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.110787] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.110901] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.111018] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *14
[ 0.111132] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.111133] vgaarb: loaded
[ 0.111134] vgaarb: bridge control possible 0000:02:00.0
[ 0.111182] PCI: Using ACPI for IRQ routing
[ 0.117499] PCI: pci_cache_line_size set to 64 bytes
[ 0.117554] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.117556] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
[ 0.117694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.117700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.117703] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.119765] Switching to clocksource hpet
[ 0.119771] pnp: PnP ACPI init
[ 0.119771] ACPI: bus type pnp registered
[ 0.119771] pnp 00:00: [bus 00-ff]
[ 0.119771] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.119771] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.119771] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.119771] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.119771] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.119771] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled]
[ 0.119771] pnp 00:00: [mem 0xf0000000-0xfed44fff window]
[ 0.119771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.119771] pnp 00:01: [dma 4]
[ 0.119771] pnp 00:01: [io 0x0000-0x000f]
[ 0.119771] pnp 00:01: [io 0x0081-0x0083]
[ 0.119771] pnp 00:01: [io 0x0087]
[ 0.119771] pnp 00:01: [io 0x0089-0x008b]
[ 0.119771] pnp 00:01: [io 0x008f]
[ 0.119771] pnp 00:01: [io 0x00c0-0x00df]
[ 0.119771] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.119771] pnp 00:02: [io 0x0061]
[ 0.119771] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.119771] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.119771] pnp 00:03: [irq 13]
[ 0.119771] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.119771] pnp 00:04: [io 0x03f0-0x03f5]
[ 0.119771] pnp 00:04: [io 0x03f7]
[ 0.119771] pnp 00:04: [irq 6]
[ 0.119771] pnp 00:04: [dma 2]
[ 0.119771] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.120103] pnp 00:05: [io 0x0378-0x037f]
[ 0.120112] pnp 00:05: [irq 7]
[ 0.120114] pnp 00:05: [dma 0 disabled]
[ 0.120442] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.120814] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.120817] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.120819] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.120822] pnp 00:06: [io 0x0010-0x001f]
[ 0.120824] pnp 00:06: [io 0x0022-0x003f]
[ 0.120826] pnp 00:06: [io 0x0044-0x004d]
[ 0.120828] pnp 00:06: [io 0x0050-0x005f]
[ 0.120830] pnp 00:06: [io 0x0062-0x0063]
[ 0.120832] pnp 00:06: [io 0x0065-0x006f]
[ 0.120835] pnp 00:06: [io 0x0072-0x007f]
[ 0.120837] pnp 00:06: [io 0x0080]
[ 0.120839] pnp 00:06: [io 0x0084-0x0086]
[ 0.120841] pnp 00:06: [io 0x0088]
[ 0.120843] pnp 00:06: [io 0x008c-0x008e]
[ 0.120846] pnp 00:06: [io 0x0090-0x009f]
[ 0.120848] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.120850] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.120852] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.120854] pnp 00:06: [io 0x0800-0x080f]
[ 0.120857] pnp 00:06: [io 0x0500-0x057f]
[ 0.120859] pnp 00:06: [io 0x0580-0x05ff]
[ 0.120861] pnp 00:06: [io 0x0800-0x087f]
[ 0.120863] pnp 00:06: [io 0x0880-0x08ff]
[ 0.120865] pnp 00:06: [io 0x0d00-0x0d7f]
[ 0.120867] pnp 00:06: [io 0x0d80-0x0dff]
[ 0.120870] pnp 00:06: [io 0x0900-0x097f]
[ 0.120872] pnp 00:06: [io 0x0980-0x09ff]
[ 0.120874] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.120877] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.120879] pnp 00:06: [mem 0xfed04000-0xfed04fff]
[ 0.120882] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.120889] pnp 00:06: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.120892] pnp 00:06: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 0.120953] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.120956] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.120959] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.120962] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.120965] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.120967] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.120970] system 00:06: [io 0x0d00-0x0d7f] has been reserved
[ 0.120973] system 00:06: [io 0x0d80-0x0dff] has been reserved
[ 0.120976] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.120979] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.120982] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.120985] system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.120988] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.120991] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.121105] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[ 0.121108] pnp 00:07: [irq 2 disabled]
[ 0.121116] pnp 00:07: [irq 8]
[ 0.121139] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.121163] pnp 00:08: [io 0x0070-0x0071]
[ 0.121184] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.121293] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.121295] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.121298] pnp 00:09: [mem 0xd0000000-0xdfffffff]
[ 0.121330] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.121333] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.121336] system 00:09: [mem 0xd0000000-0xdfffffff] has been reserved
[ 0.121339] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.121367] pnp 00:0a: [io 0x0060]
[ 0.121370] pnp 00:0a: [io 0x0064]
[ 0.121378] pnp 00:0a: [irq 1]
[ 0.121408] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.121590] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.121593] pnp 00:0b: [io 0x0230-0x023f]
[ 0.121595] pnp 00:0b: [io 0x0290-0x029f]
[ 0.121597] pnp 00:0b: [io 0x0a00-0x0a0f]
[ 0.121599] pnp 00:0b: [io 0x0a10-0x0a1f]
[ 0.121630] system 00:0b: [io 0x0230-0x023f] has been reserved
[ 0.121633] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.121636] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.121638] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.121641] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122300] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.122308] pnp 00:0c: [irq 4]
[ 0.122311] pnp 00:0c: [dma 0 disabled]
[ 0.122377] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.122437] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.122467] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.122470] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122652] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.122654] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.122657] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.122659] pnp 00:0e: [mem 0x00100000-0xdfffffff]
[ 0.122661] pnp 00:0e: [mem 0xfed45000-0xffffffff]
[ 0.122698] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.122701] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.122704] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.122706] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.122709] system 00:0e: [mem 0xfed45000-0xffffffff] could not be reserved
[ 0.122712] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.123450] pnp: PnP ACPI: found 15 devices
[ 0.123451] ACPI: ACPI bus type pnp unregistered
[ 0.129768] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.129777] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.129779] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.129782] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.129785] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.129789] pci 0000:00:10.0: PCI bridge to [bus 03]
[ 0.129813] pci 0000:00:12.0: PCI bridge to [bus 04]
[ 0.129843] pci 0000:00:08.0: setting latency timer to 64
[ 0.129847] pci 0000:00:0b.0: setting latency timer to 64
[ 0.130077] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.130283] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.130296] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.130298] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.130300] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.130303] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.130305] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed44fff]
[ 0.130307] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.130309] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.130312] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.130314] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.130316] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfed44fff]
[ 0.130318] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.130320] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfebfffff]
[ 0.130323] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.130361] NET: Registered protocol family 2
[ 0.131001] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.134528] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.134980] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.135060] TCP: reno registered
[ 0.135071] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.135103] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.135211] NET: Registered protocol family 1
[ 0.135494] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.135699] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.135885] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.136108] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 0.136223] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.136316] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.136414] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.136517] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.136619] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.136742] pci 0000:02:00.0: Boot video device
[ 0.136744] PCI: CLS 64 bytes, default 64
[ 0.136792] Unpacking initramfs...
[ 0.382182] Freeing initrd memory: 11812k freed
[ 0.388080] PCI-DMA: Disabling AGP.
[ 0.388154] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.388155] PCI-DMA: using GART IOMMU.
[ 0.388158] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.390725] audit: initializing netlink socket (disabled)
[ 0.390741] type=2000 audit(1351583134.388:1): initialized
[ 0.404155] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.404558] VFS: Disk quotas dquot_6.5.2
[ 0.404578] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.404655] msgmni has been set to 7424
[ 0.404813] alg: No test for stdrng (krng)
[ 0.404831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.404833] io scheduler noop registered
[ 0.404835] io scheduler deadline registered
[ 0.404841] io scheduler cfq registered (default)
[ 0.405150] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.405171] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.405173] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.405492] GHES: HEST is not enabled!
[ 0.405550] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.425970] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.426372] Linux agpgart interface v0.103
[ 0.426464] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.426465] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.426611] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.426708] mousedev: PS/2 mouse device common for all mice
[ 0.426758] rtc_cmos 00:08: RTC can wake from S4
[ 0.426999] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.427053] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.427062] cpuidle: using governor ladder
[ 0.427063] cpuidle: using governor menu
[ 0.427087] drop_monitor: Initializing network drop monitor service
[ 0.427154] TCP: cubic registered
[ 0.427171] NET: Registered protocol family 10
[ 0.427347] mip6: Mobile IPv6
[ 0.427349] NET: Registered protocol family 17
[ 0.427367] Key type dns_resolver registered
[ 0.427552] PM: Hibernation image not present or could not be loaded.
[ 0.427560] registered taskstats version 1
[ 0.428254] rtc_cmos 00:08: setting system clock to 2012-10-30 07:45:34 UTC (1351583134)
[ 0.429635] Freeing unused kernel memory: 616k freed
[ 0.429896] Write protecting the kernel read-only data: 6144k
[ 0.431952] Freeing unused kernel memory: 528k freed
[ 0.434409] Freeing unused kernel memory: 584k freed
[ 0.452405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.566458] ACPI: bus type usb registered
[ 0.566489] usbcore: registered new interface driver usbfs
[ 0.566502] usbcore: registered new interface driver hub
[ 0.571047] Floppy drive(s): fd0 is 1.44M
[ 0.599264] usbcore: registered new device driver usb
[ 0.599713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.599764] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.599767] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.599773] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.599805] ehci_hcd 0000:00:02.1: debug port 1
[ 0.599809] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.599834] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfcf7fc00
[ 0.605123] FDC 0 is a post-1991 82077
[ 0.608048] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.608090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.608093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.608095] usb usb1: Product: EHCI Host Controller
[ 0.608097] usb usb1: Manufacturer: Linux 3.7.0-rc3-ao2 ehci_hcd
[ 0.608099] usb usb1: SerialNumber: 0000:00:02.1
[ 0.608227] hub 1-0:1.0: USB hub found
[ 0.608232] hub 1-0:1.0: 6 ports detected
[ 0.608388] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.608390] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.608397] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.608423] ehci_hcd 0000:00:04.1: debug port 1
[ 0.608428] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.608452] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfcf7f800
[ 0.618358] SCSI subsystem initialized
[ 0.620055] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.620099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.620102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.620104] usb usb2: Product: EHCI Host Controller
[ 0.620106] usb usb2: Manufacturer: Linux 3.7.0-rc3-ao2 ehci_hcd
[ 0.620108] usb usb2: SerialNumber: 0000:00:04.1
[ 0.620229] hub 2-0:1.0: USB hub found
[ 0.620234] hub 2-0:1.0: 6 ports detected
[ 0.620747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.620788] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.620790] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.620798] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.620834] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfcf7e000
[ 0.633595] ACPI: bus type scsi registered
[ 0.636177] libata version 3.00 loaded.
[ 0.678025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.678030] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.678032] usb usb3: Product: OHCI Host Controller
[ 0.678034] usb usb3: Manufacturer: Linux 3.7.0-rc3-ao2 ohci_hcd
[ 0.678036] usb usb3: SerialNumber: 0000:00:02.0
[ 0.678157] hub 3-0:1.0: USB hub found
[ 0.678164] hub 3-0:1.0: 6 ports detected
[ 0.678392] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.678395] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.678401] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.678435] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfcf7d000
[ 0.734009] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.734012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.734014] usb usb4: Product: OHCI Host Controller
[ 0.734016] usb usb4: Manufacturer: Linux 3.7.0-rc3-ao2 ohci_hcd
[ 0.734018] usb usb4: SerialNumber: 0000:00:04.0
[ 0.734161] hub 4-0:1.0: USB hub found
[ 0.734167] hub 4-0:1.0: 6 ports detected
[ 0.736033] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.736247] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 0.736254] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.801050] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:0b:e0:f0:00:ed
[ 0.801055] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 0.801261] ahci 0000:00:09.0: version 3.0
[ 0.801455] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 0.801502] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.801512] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 0.801590] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.801594] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 0.801597] ahci 0000:00:09.0: setting latency timer to 64
[ 0.803522] scsi0 : ahci
[ 0.803656] scsi1 : ahci
[ 0.803742] scsi2 : ahci
[ 0.803828] scsi3 : ahci
[ 0.803922] scsi4 : ahci
[ 0.804041] scsi5 : ahci
[ 0.804091] ata1: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76100 irq 40
[ 0.804094] ata2: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76180 irq 40
[ 0.804096] ata3: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76200 irq 40
[ 0.804098] ata4: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76280 irq 40
[ 0.804100] ata5: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76300 irq 40
[ 0.804101] ata6: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76380 irq 40
[ 1.032014] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[ 1.124018] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.124034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.124045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.124053] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.124063] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.124072] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.125034] ata1.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 1.125036] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.125197] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.125459] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
[ 1.126540] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.126543] ata1.00: configured for UDMA/133
[ 1.126637] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 1.165864] usb 1-6: New USB device found, idVendor=058f, idProduct=6362
[ 1.165867] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.165869] usb 1-6: Product: Mass Storage Device
[ 1.165871] usb 1-6: Manufacturer: Generic
[ 1.165873] usb 1-6: SerialNumber: 058E63626375
[ 1.168361] usbcore: registered new interface driver uas
[ 1.524015] usb 4-3: new low-speed USB device number 2 using ohci_hcd
[ 1.736031] usb 4-3: New USB device found, idVendor=046d, idProduct=c05a
[ 1.736034] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.736036] usb 4-3: Product: USB Optical Mouse
[ 1.736038] usb 4-3: Manufacturer: Logitech
[ 1.926579] ata3.00: configured for UDMA/100
[ 2.168015] usb 3-3: new full-speed USB device number 2 using ohci_hcd
[ 2.390032] usb 3-3: New USB device found, idVendor=0a5c, idProduct=2102
[ 2.390034] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.390037] usb 3-3: Product: ANYCOM Blue USB-200/250
[ 2.390039] usb 3-3: Manufacturer: Broadcom Corp
[ 2.728394] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5
[ 2.729595] Initializing USB Mass Storage driver...
[ 2.738041] scsi6 : usb-storage 1-6:1.0
[ 2.738261] usbcore: registered new interface driver usb-storage
[ 2.738263] USB Mass Storage support registered.
[ 2.740108] usbcore: registered new interface driver usbhid
[ 2.740111] usbhid: USB HID core driver
[ 2.741029] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.741070] sd 0:0:0:0: [sda] Write Protect is off
[ 2.741073] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.741091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.743847] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input1
[ 2.744120] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-3/input0
[ 2.745868] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.745872] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.745984] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.789369] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.789727] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.794226] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.794288] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.807576] ata3.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[ 2.807621] ata3.00: irq_stat 0x08000002, interface fatal error
[ 2.807660] ata3: SError: { Proto }
[ 2.807695] ata3.00: failed command: IDENTIFY PACKET DEVICE
[ 2.807735] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 2.807735] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[ 2.807788] ata3.00: status: { DRDY }
[ 2.807825] ata3: hard resetting link
[ 3.124020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.738128] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.738622] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.739122] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.739622] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.740074] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.740223] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 3.740361] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 3.740505] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 3.746011] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.746631] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.747245] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.747871] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 4.409528] ata3.00: configured for UDMA/100
[ 5.210306] ata3: EH complete
[ 5.219510] ata3.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[ 5.219554] ata3.00: irq_stat 0x08000002, interface fatal error
[ 5.219593] ata3: SError: { Proto }
[ 5.219628] ata3.00: failed command: IDENTIFY PACKET DEVICE
[ 5.219668] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 5.219668] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[ 5.219721] ata3.00: status: { DRDY }
[ 5.219758] ata3: hard resetting link
[ 5.536017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.821488] ata3.00: configured for UDMA/100
[ 7.622321] ata3: EH complete
[ 7.633149] device-mapper: uevent: version 1.0.3
[ 7.633439] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 7.642671] PM: Starting manual resume from disk
[ 7.642676] PM: Hibernation image partition 8:5 present
[ 7.642677] PM: Looking for hibernation image.
[ 7.642884] PM: Image not found (code -22)
[ 7.642886] PM: Hibernation image not present or could not be loaded.
[ 7.645995] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 7.646001] PM: Marking nosave pages: [mem 0xcff90000-0xffffffff]
[ 7.646770] PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff]
[ 7.646940] PM: Basic memory bitmaps created
[ 7.663087] PM: Basic memory bitmaps freed
[ 7.697662] kjournald starting. Commit interval 5 seconds
[ 7.697684] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.022858] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.022865] ACPI: Power Button [PWRB]
[ 10.023033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 10.023036] ACPI: Power Button [PWRF]
[ 10.047068] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 10.047073] ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \SM00 1 (20120913/utaddress-251)
[ 10.047078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.082548] wmi: Mapper loaded
[ 10.176538] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.203287] microcode: AMD CPU family 0xf not supported
[ 10.285064] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 10.285191] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 10.285254] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input4
[ 10.330930] EDAC MC: Ver: 3.0.0
[ 10.382928] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.393422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.576300] [drm] Initialized drm 1.1.0 20060810
[ 10.595449] MCE: In-kernel MCE decoding enabled.
[ 10.637493] AMD64 EDAC driver v3.4.0
[ 10.637529] EDAC amd64: DRAM ECC disabled.
[ 10.637532] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.637532] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.637532] (Note that use of the override may cause unknown side effects.)
[ 10.821232] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.821281] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.916365] ata3.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[ 10.916435] ata3.00: irq_stat 0x08000002, interface fatal error
[ 10.916486] ata3: SError: { Proto }
[ 10.916534] ata3.00: failed command: IDENTIFY PACKET DEVICE
[ 10.916613] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 10.916613] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[ 10.916705] ata3.00: status: { DRDY }
[ 10.916754] ata3: hard resetting link
[ 10.961027] Bluetooth: Core ver 2.16
[ 10.961059] NET: Registered protocol family 31
[ 10.961061] Bluetooth: HCI device and connection manager initialized
[ 10.961254] Bluetooth: HCI socket layer initialized
[ 10.961257] Bluetooth: L2CAP socket layer initialized
[ 10.961263] Bluetooth: SCO socket layer initialized
[ 10.992337] usbcore: registered new interface driver btusb
[ 11.210817] kvm: Nested Virtualization enabled
[ 11.236020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 11.243841] powernow-k8: fid 0x14 (2800 MHz), vid 0xa
[ 11.243845] powernow-k8: fid 0x12 (2600 MHz), vid 0xc
[ 11.243846] powernow-k8: fid 0x10 (2400 MHz), vid 0xe
[ 11.243847] powernow-k8: fid 0xe (2200 MHz), vid 0x10
[ 11.243848] powernow-k8: fid 0xc (2000 MHz), vid 0x10
[ 11.243850] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 11.243851] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 11.243883] powernow-k8: Found 1 AMD Athlon(tm) Processor LE-1660 (1 cpu cores) (version 2.20.00)
[ 11.445895] MXM: GUID detected in BIOS
[ 11.446145] nouveau 0000:02:00.0: setting latency timer to 64
[ 11.446602] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
[ 11.447218] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0aa480a2
[ 11.447226] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP77/MCP78 (NVAA)
[ 11.447231] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 11.450154] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 11.498609] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 11.498615] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 11.499115] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 11.499123] nouveau [ VBIOS][0000:02:00.0] version 62.77.35.00
[ 11.530057] nouveau [ MXM][0000:02:00.0] no VBIOS data, nothing to do
[ 11.560999] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 11.561010] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 12.208023] i2c i2c-2: sendbytes: error -110
[ 12.552480] ata3.00: configured for UDMA/100
[ 12.740023] i2c i2c-2: sendbytes: error -110
[ 13.324508] ata3: EH complete
[ 13.940022] i2c i2c-2: sendbytes: error -110
[ 14.136014] i2c i2c-2: sendbytes: error -110
[ 14.137401] [TTM] Zone kernel: Available graphics memory: 1901408 kiB
[ 14.137408] [TTM] Initializing pool allocator
[ 14.137420] [TTM] Initializing DMA pool allocator
[ 14.137807] nouveau [ DRM] VRAM: 256 MiB
[ 14.137816] nouveau [ DRM] GART: 512 MiB
[ 14.137829] nouveau [ DRM] BIT BIOS found
[ 14.137836] nouveau [ DRM] Bios version 62.77.35.00
[ 14.137845] nouveau [ DRM] TMDS table version 2.0
[ 14.137851] nouveau [ DRM] DCB version 4.0
[ 14.137857] nouveau [ DRM] DCB outp 00: 01000300 0000001e
[ 14.137863] nouveau [ DRM] DCB outp 01: 01011332 00020010
[ 14.137868] nouveau [ DRM] DCB conn 00: 00000000
[ 14.137874] nouveau [ DRM] DCB conn 01: 00003161
[ 14.151539] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.151546] [drm] No driver support for vblank timestamp query.
[ 14.344144] nouveau [ DRM] 1 available performance level(s)
[ 14.344159] nouveau [ DRM] 0: core 500MHz shader 1200MHz voltage 1100mV fanspeed 100%
[ 14.344165] nouveau [ DRM] c:
[ 14.387963] nouveau [ DRM] MM: using M2MF for buffer copies
[ 14.419955] nouveau [ DRM] allocated 1024x768 fb: 0x50000, bo ffff88011a025800
[ 14.420199] fbcon: nouveaufb (fb0) is primary device
[ 14.439651] Console: switching to colour frame buffer device 128x48
[ 14.440796] fb0: nouveaufb frame buffer device
[ 14.440800] drm: registered panic notifier
[ 14.444060] [drm] Initialized nouveau 1.1.0 20120801 for 0000:02:00.0 on minor 0
[ 14.444884] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 14.444895] hda_intel: Disabling MSI
[ 14.444981] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 16.172470] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
[ 16.172838] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
[ 16.173161] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[ 16.173469] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[ 16.173786] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 16.174093] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[ 16.174388] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[ 16.174695] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 16.174998] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[ 17.289608] Adding 5662876k swap on /dev/sda5. Priority:-1 extents:1 across:5662876k
[ 17.891037] EXT3-fs (sda1): using internal journal
[ 18.123745] fuse init (API version 7.20)
[ 18.173682] loop: module loaded
[ 18.259479] it87: Found IT8712F chip at 0x290, revision 8
[ 18.259496] it87: VID is disabled (pins used for GPIO)
[ 18.259577] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20120913/utaddress-251)
[ 18.259591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.276609] kjournald starting. Commit interval 5 seconds
[ 21.277109] EXT3-fs (sda7): using internal journal
[ 21.277116] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 21.376033] kjournald starting. Commit interval 5 seconds
[ 21.376537] EXT3-fs (sda6): using internal journal
[ 21.376543] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 23.702780] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.970138] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 24.362264] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 24.362342] forcedeth 0000:00:0a.0 eth0: MSI enabled
[ 27.734155] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 30.092195] Loading iSCSI transport class v2.0-870.
[ 30.121060] iscsi: registered transport (tcp)
[ 30.238950] iscsi: registered transport (iser)
[ 31.820186] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 33.235834] sit: IPv6 over IPv4 tunneling driver
[ 33.278318] tun: Universal TUN/TAP device driver, 1.6
[ 33.278326] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 38.256123] Bluetooth: RFCOMM TTY layer initialized
[ 38.256166] Bluetooth: RFCOMM socket layer initialized
[ 38.256170] Bluetooth: RFCOMM ver 1.11
[ 38.330314] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.330323] Bluetooth: BNEP filters: protocol multicast
[ 38.330348] Bluetooth: BNEP socket layer initialized
[ 40.418155] lp0: using parport0 (interrupt-driven).
[ 40.529256] ppdev: user-space parallel port driver
[ 47.517752] Bridge firewalling registered
[ 48.144822] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 50.290818] Ebtables v2.0 registered
[ 85.609241] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 85.609274] Bluetooth: HIDP socket layer initialized
[ 115.819460] BUG: unable to handle kernel paging request at fffffffffffffff8
[ 115.819521] IP: [<ffffffffa033267a>] nouveau_mm_head+0x30/0x127 [nouveau]
[ 115.819632] PGD 160d067 PUD 160e067 PMD 0
[ 115.819656] Oops: 0000 [#1] SMP
[ 115.819676] Modules linked in: hidp ebtable_nat ebtables cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace ipt_MASQUERADE xt_CHECKSUM bridge stp llc ppdev lp bnep rfcomm tun sit tunnel4 binfmt_misc uinput ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip6table_raw ip6table_mangle ip6t_REJECT xt_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6t_rt ip6table_filter ip6_tables xt_tcpudp ipt_REJECT ipt_ULOG xt_limit xt_multiport xt_conntrack iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ip_tables x_tables hwmon_vid loop fuse snd_hda_codec_hdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi nouveau snd_seq_midi_event snd_rawmidi powernow_k8 kvm_amd kvm snd_seq btusb bluetooth rfkill parport_pc parport ttm drm_kms_helper snd_seq_device snd_timer edac_mce_amd snd drm i2c
_algo_bit shpchp pcspkr mxm_wmi edac_core video crc16 soundcore k8temp evdev processor asus_atk0110 wmi thermal_sys i2c_nforce2 i2c_core button ext3 mbcache jbd dm_mod sg hid_generic sr_mod sd_mod cdrom crc_t10dif usbhid usb_storage hid uas ahci libahci libata forcedeth ohci_hcd scsi_mod ehci_hcd floppy usbcore usb_common
[ 115.820391] CPU 0
[ 115.820405] Pid: 2953, comm: Xorg Not tainted 3.7.0-rc3-ao2 #1 System manufacturer System Product Name/M3N78-VM
[ 115.820434] RIP: 0010:[<ffffffffa033267a>] [<ffffffffa033267a>] nouveau_mm_head+0x30/0x127 [nouveau]
[ 115.820494] RSP: 0018:ffff88011839d9a8 EFLAGS: 00010212
[ 115.820510] RAX: 00000000ffffffff RBX: fffffffffffffff0 RCX: 000000000000000c
[ 115.820531] RDX: 000000000000000c RSI: 0000000000000001 RDI: ffff8801182f60e8
[ 115.820551] RBP: ffff8800cfa16f78 R08: 0000000000000000 R09: ffff8800cfa16f78
[ 115.820572] R10: ffff8801182f6000 R11: ffff8800cfa16ec0 R12: 000000000000000c
[ 115.820592] R13: ffff8801182f6001 R14: ffff8801182f6020 R15: ffff88011839da70
[ 115.820614] FS: 00007f93e340d880(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
[ 115.820635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 115.820652] CR2: fffffffffffffff8 CR3: 000000011874f000 CR4: 00000000000007f0
[ 115.820673] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 115.820693] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 115.820712] Process Xorg (pid: 2953, threadinfo ffff88011839c000, task ffff880117e2a040)
[ 115.820732] Stack:
[ 115.820740] 0000000000000246 ffffffff810fa13d ffffffff81060f13 0000000000000060
[ 115.820774] 0000000000000002 0000000000000010 ffff8801182f6000 ffff8801182f6020
[ 115.820805] ffff88011839da70 ffffffffa034210a 0000000000000000 00000060810c7d9e
[ 115.820835] Call Trace:
[ 115.820857] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
[ 115.820883] [<ffffffff81060f13>] ? should_resched+0x5/0x23
[ 115.820941] [<ffffffffa034210a>] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau]
[ 115.821009] [<ffffffffa03807b6>] ? nouveau_vram_manager_new+0x62/0xa4 [nouveau]
[ 115.821051] [<ffffffffa0251d34>] ? ttm_bo_mem_space+0x112/0x2f8 [ttm]
[ 115.821083] [<ffffffffa0251fbd>] ? ttm_bo_move_buffer+0xa3/0xee [ttm]
[ 115.821105] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
[ 115.821136] [<ffffffffa02520ae>] ? ttm_bo_validate+0xa6/0xeb [ttm]
[ 115.821166] [<ffffffffa0252466>] ? ttm_bo_init+0x373/0x3b2 [ttm]
[ 115.821232] [<ffffffffa0382021>] ? nouveau_bo_new+0x23f/0x264 [nouveau]
[ 115.821292] [<ffffffffa0381c55>] ? nouveau_ttm_tt_unpopulate+0xa3/0xa3 [nouveau]
[ 115.821292] [<ffffffffa038377a>] ? nouveau_gem_new+0x53/0xf7 [nouveau]
[ 115.821292] [<ffffffff81060f13>] ? should_resched+0x5/0x23
[ 115.821292] [<ffffffff8137031a>] ? _cond_resched+0x6/0x1b
[ 115.821292] [<ffffffffa03838bd>] ? nouveau_gem_ioctl_new+0x9f/0x107 [nouveau]
[ 115.821292] [<ffffffffa020107b>] ? drm_gem_flink_ioctl+0xc1/0xde [drm]
[ 115.821292] [<ffffffffa01ff603>] ? drm_ioctl+0x28c/0x36a [drm]
[ 115.821292] [<ffffffff810dfe6e>] ? handle_pte_fault+0x6ff/0x770
[ 115.821292] [<ffffffffa038381e>] ? nouveau_gem_new+0xf7/0xf7 [nouveau]
[ 115.821292] [<ffffffff81373f12>] ? __do_page_fault+0x2d8/0x376
[ 115.821292] [<ffffffff8110eb82>] ? vfs_ioctl+0x1e/0x31
[ 115.821292] [<ffffffff8110f3ba>] ? do_vfs_ioctl+0x3ee/0x430
[ 115.821292] [<ffffffff8110289c>] ? vfs_read+0xac/0xf5
[ 115.821292] [<ffffffff8110f449>] ? sys_ioctl+0x4d/0x7c
[ 115.821292] [<ffffffff81376129>] ? system_call_fastpath+0x16/0x1b
[ 115.821292] Code: 44 89 c0 41 56 f7 d0 41 55 41 88 f5 41 54 41 89 d4 55 4c 89 cd 53 48 83 ec 18 48 8b 5f 10 89 44 24 0c 48 83 eb 10 e9 da 00 00 00 <48> 8b 43 08 44 8b 53 34 44 8b 7b 38 48 39 f8 45 89 d3 47 8d 0c
[ 115.821292] RIP [<ffffffffa033267a>] nouveau_mm_head+0x30/0x127 [nouveau]
[ 115.821292] RSP <ffff88011839d9a8>
[ 115.821292] CR2: fffffffffffffff8
[ 115.821292] ---[ end trace cc9ee83770ef32d5 ]---
[ 117.838087] nouveau E[ DRM] EvoCh 1 Mthd 0x0080 Data 0x00000000 (0x000b 0x05)
[ 117.840022] [sched_delayed] sched: RT throttling activated

--
Antonio Ospite
http://ao2.it

A: Because it messes up the order in which people normally read text.
See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?

2012-11-05 08:29:27

by Antonio Ospite

Subject: Re: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8

On Mon, 29 Oct 2012 23:16:24 +0100
Antonio Ospite <[email protected]> wrote:

> Hi,
>
> I am experiencing a bug with nouveau with linux-3.7-rc3 (and since rc1),
> my video adapter is the one integrated on the MSI M3N78-VM motherboard
> (hence x86_64):
>
[...]
> [ 1943.858601] BUG: unable to handle kernel paging request at fffffffffffffff8
> [ 1943.858669] IP: [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
> [ 1943.858779] PGD 160d067 PUD 160e067 PMD 0
> [ 1943.858803] Oops: 0000 [#1] SMP
[..]
> [ 1943.860018] Call Trace:
> [ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
> [ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
> [ 1943.860019] [<ffffffffa032a10a>] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau]

Ben, I cannot reproduce the crash with 3.7-rc4, I spotted commits
a7dbf00 and 5cad16a which seem to be related to the problem I was
having; would you mind elaborating a bit about what you think was
causing the crash on my side? Maybe the chipset used on this motherboard
doesn't support some feature? And how did you figured out from the logs?

Thanks,
Antonio

--
Antonio Ospite
http://ao2.it

A: Because it messes up the order in which people normally read text.
See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?

2012-11-05 08:40:40

by Dave Airlie

Subject: Re: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8

On Mon, Nov 5, 2012 at 8:29 AM, Antonio Ospite <[email protected]> wrote:
> On Mon, 29 Oct 2012 23:16:24 +0100
> Antonio Ospite <[email protected]> wrote:
>
>> Hi,
>>
>> I am experiencing a bug with nouveau with linux-3.7-rc3 (and since rc1),
>> my video adapter is the one integrated on the MSI M3N78-VM motherboard
>> (hence x86_64):
>>
> [...]
>> [ 1943.858601] BUG: unable to handle kernel paging request at fffffffffffffff8
>> [ 1943.858669] IP: [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
>> [ 1943.858779] PGD 160d067 PUD 160e067 PMD 0
>> [ 1943.858803] Oops: 0000 [#1] SMP
> [..]
>> [ 1943.860018] Call Trace:
>> [ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
>> [ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
>> [ 1943.860019] [<ffffffffa032a10a>] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau]
>
> Ben, I cannot reproduce the crash with 3.7-rc4, I spotted commits
> a7dbf00 and 5cad16a which seem to be related to the problem I was
> having; would you mind elaborating a bit about what you think was
> causing the crash on my side? Maybe the chipset used on this motherboard
> doesn't support some feature? And how did you figured out from the logs?
>

5cad16acd25b16681a060d28d10eeacf98d07701 is the actual fix

The chipset hasn't got Z compression support, and the oops once decoded pointed
out the new code was trying to allocate Z tags from a NULL memory block. The old
code use to allocate an empty memory block instead of NULL, and it got
lost in the
rewrite, Ben just fixed it to allow empty memory blocks again.

Dave.

2012-11-05 16:14:10

by Antonio Ospite

Subject: Re: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8

On Mon, 5 Nov 2012 08:40:38 +0000
Dave Airlie <[email protected]> wrote:

> On Mon, Nov 5, 2012 at 8:29 AM, Antonio Ospite <[email protected]> wrote:
> > On Mon, 29 Oct 2012 23:16:24 +0100
> > Antonio Ospite <[email protected]> wrote:
> >
> >> Hi,
> >>
> >> I am experiencing a bug with nouveau with linux-3.7-rc3 (and since rc1),
> >> my video adapter is the one integrated on the MSI M3N78-VM motherboard
> >> (hence x86_64):
> >>
> > [...]
> >> [ 1943.858601] BUG: unable to handle kernel paging request at fffffffffffffff8
> >> [ 1943.858669] IP: [<ffffffffa031a67a>] nouveau_mm_head+0x30/0x127 [nouveau]
> >> [ 1943.858779] PGD 160d067 PUD 160e067 PMD 0
> >> [ 1943.858803] Oops: 0000 [#1] SMP
> > [..]
> >> [ 1943.860018] Call Trace:
> >> [ 1943.860019] [<ffffffff810fa13d>] ? kmem_cache_alloc_trace+0xbf/0xcf
> >> [ 1943.860019] [<ffffffff81060f13>] ? should_resched+0x5/0x23
> >> [ 1943.860019] [<ffffffffa032a10a>] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau]
> >
> > Ben, I cannot reproduce the crash with 3.7-rc4, I spotted commits
> > a7dbf00 and 5cad16a which seem to be related to the problem I was
> > having; would you mind elaborating a bit about what you think was
> > causing the crash on my side? Maybe the chipset used on this motherboard
> > doesn't support some feature? And how did you figured out from the logs?
> >
>
> 5cad16acd25b16681a060d28d10eeacf98d07701 is the actual fix
>
> The chipset hasn't got Z compression support, and the oops once decoded pointed
> out the new code was trying to allocate Z tags from a NULL memory block. The old
> code use to allocate an empty memory block instead of NULL, and it got
> lost in the
> rewrite, Ben just fixed it to allow empty memory blocks again.
>
> Dave.
>

Thanks a lot for the explanation.

Regards,
Antonio

--
Antonio Ospite
http://ao2.it

A: Because it messes up the order in which people normally read text.
See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?