This is the splits the Qualcomm MSM platform into legacy support that we will
not try and convert to multiplatform and multiplatform support.
- k
Changes from v1:
* Added patch to remove hotplug.c
* Added patch to rename msm_ to qcom_
* Changes the Kconfig to drop CPU_V7
* used wfi() in cpu_die function
* Added git tree to MAINTAINERS file
Kumar Gala (5):
ARM: msm: kill off hotplug.c
clocksource: qcom: Move clocksource code out of mach-msm
arm: qcom: Split Qualcomm support into legacy and multiplatform
clocksource: qcom: split building of legacy vs multiplatform support
ARM: qcom: Rename various msm prefixed functions to qcom
arch/arm/mach-msm/board-dt.c | 41 ----
arch/arm/mach-msm/hotplug.c | 51 -----
arch/arm/mach-msm/platsmp.c | 130 --------------
arch/arm/mach-msm/scm-boot.c | 39 ----
arch/arm/mach-msm/scm-boot.h | 22 --
arch/arm/mach-msm/scm.c | 299 ---------------------------------
arch/arm/mach-msm/scm.h | 25 --
arch/arm/mach-msm/timer.c | 333 -------------------------------------
b/MAINTAINERS | 8
b/arch/arm/Kconfig | 7
b/arch/arm/Kconfig.debug | 2
b/arch/arm/Makefile | 1
b/arch/arm/boot/dts/Makefile | 6
b/arch/arm/mach-msm/Kconfig | 54 ------
b/arch/arm/mach-msm/Makefile | 8
b/arch/arm/mach-msm/common.h | 1
b/arch/arm/mach-qcom/Kconfig | 33 +++
b/arch/arm/mach-qcom/Makefile | 5
b/arch/arm/mach-qcom/board.c | 40 ++++
b/arch/arm/mach-qcom/scm-boot.c | 39 ++++
b/arch/arm/mach-qcom/scm-boot.h | 22 ++
b/arch/arm/mach-qcom/scm.c | 299 +++++++++++++++++++++++++++++++++
b/arch/arm/mach-qcom/scm.h | 25 ++
b/arch/arm/mach-qcom/smp.c | 137 +++++++++++++++
b/drivers/clocksource/Kconfig | 4
b/drivers/clocksource/Makefile | 1
b/drivers/clocksource/qcom-timer.c | 330 ++++++++++++++++++++++++++++++++++++
27 files changed, 957 insertions(+), 1005 deletions(-)
Right now hotplug.c only really implements msm_cpu_die as a wfi. Just
move that implementation into platsmp.c. At the same time we use the
existing wfi() instead of inline asm.
Signed-off-by: Kumar Gala <[email protected]>
---
arch/arm/mach-msm/Makefile | 1 -
arch/arm/mach-msm/common.h | 1 -
arch/arm/mach-msm/hotplug.c | 51 ---------------------------------------------
arch/arm/mach-msm/platsmp.c | 7 +++++++
4 files changed, 7 insertions(+), 53 deletions(-)
delete mode 100644 arch/arm/mach-msm/hotplug.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 721f27f..8327f60 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 33c7725..0a4899b 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
-extern void msm_cpu_die(unsigned int cpu);
struct msm_mmc_platform_data;
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
deleted file mode 100644
index cea80fc..0000000
--- a/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "common.h"
-
-static inline void cpu_enter_lowpower(void)
-{
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
- asm("wfi"
- :
- :
- : "memory", "cc");
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref msm_cpu_die(unsigned int cpu)
-{
- /*
- * we're ready for shutdown now, so do it
- */
- cpu_enter_lowpower();
- platform_do_lowpower(cpu);
-
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
-}
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 3721b31..251a91e 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -29,6 +29,13 @@ extern void secondary_startup(void);
static DEFINE_SPINLOCK(boot_lock);
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref msm_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
static inline int get_core_count(void)
{
/* 1 + the PART[1:0] field of MIDR */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
As mach-qcom will support a number of different Qualcomm SoC platforms
we replace the msm prefix on function names with qcom to be a bit more
generic.
Signed-off-by: Kumar Gala <[email protected]>
---
arch/arm/mach-qcom/board.c | 4 ++--
arch/arm/mach-qcom/smp.c | 22 +++++++++++-----------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index 4529f6b..830f69c 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -17,7 +17,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-extern struct smp_operations msm_smp_ops;
+extern struct smp_operations qcom_smp_ops;
static const char * const qcom_dt_match[] __initconst = {
"qcom,msm8660-surf",
@@ -31,7 +31,7 @@ static const char * const apq8074_dt_match[] __initconst = {
};
DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
+ .smp = smp_ops(qcom_smp_ops),
.dt_compat = qcom_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-qcom/smp.c b/arch/arm/mach-qcom/smp.c
index 67823a7..9c53ea7 100644
--- a/arch/arm/mach-qcom/smp.c
+++ b/arch/arm/mach-qcom/smp.c
@@ -30,7 +30,7 @@ extern void secondary_startup(void);
static DEFINE_SPINLOCK(boot_lock);
#ifdef CONFIG_HOTPLUG_CPU
-static void __ref msm_cpu_die(unsigned int cpu)
+static void __ref qcom_cpu_die(unsigned int cpu)
{
wfi();
}
@@ -42,7 +42,7 @@ static inline int get_core_count(void)
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-static void msm_secondary_init(unsigned int cpu)
+static void qcom_secondary_init(unsigned int cpu)
{
/*
* Synchronise with the boot thread.
@@ -70,7 +70,7 @@ static void prepare_cold_cpu(unsigned int cpu)
"address\n");
}
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static int cold_boot_done;
@@ -108,7 +108,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
-static void __init msm_smp_init_cpus(void)
+static void __init qcom_smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
@@ -122,16 +122,16 @@ static void __init msm_smp_init_cpus(void)
set_cpu_possible(i, true);
}
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
}
-struct smp_operations msm_smp_ops __initdata = {
- .smp_init_cpus = msm_smp_init_cpus,
- .smp_prepare_cpus = msm_smp_prepare_cpus,
- .smp_secondary_init = msm_secondary_init,
- .smp_boot_secondary = msm_boot_secondary,
+struct smp_operations qcom_smp_ops __initdata = {
+ .smp_init_cpus = qcom_smp_init_cpus,
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_secondary_init = qcom_secondary_init,
+ .smp_boot_secondary = qcom_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = msm_cpu_die,
+ .cpu_die = qcom_cpu_die,
#endif
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
The majority of the clocksource code for the Qualcomm platform is shared
between newer (multiplatform) and older platforms. However there is a bit
of code that isn't, so only build it for the appropriate config.
Acked-by: Olof Johansson <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
---
drivers/clocksource/qcom-timer.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
index dca829e..e807acf 100644
--- a/drivers/clocksource/qcom-timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -106,15 +106,6 @@ static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
return readl_relaxed(source_base + TIMER_COUNT_VAL);
}
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
- /*
- * Shift timer count down by a constant due to unreliable lower bits
- * on some targets.
- */
- return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
static struct clocksource msm_clocksource = {
.name = "dg_timer",
.rating = 300,
@@ -228,7 +219,7 @@ err:
sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
}
-#ifdef CONFIG_OF
+#ifdef CONFIG_ARCH_QCOM
static void __init msm_dt_timer_init(struct device_node *np)
{
u32 freq;
@@ -281,7 +272,7 @@ static void __init msm_dt_timer_init(struct device_node *np)
}
CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
+#else
static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
u32 sts)
@@ -301,6 +292,15 @@ static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
return 0;
}
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
void __init msm7x01_timer_init(void)
{
struct clocksource *cs = &msm_clocksource;
@@ -327,3 +327,4 @@ void __init qsd8x50_timer_init(void)
return;
msm_timer_init(19200000 / 4, 32, 7, false);
}
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
Introduce a new mach-qcom that will support SoCs that intend to be
multiplatform compatiable while keeping mach-msm to legacy SoC/board
support that will not transition over to multiplatform.
As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
to mach-qcom.
Signed-off-by: Kumar Gala <[email protected]>
---
MAINTAINERS | 8 ++
arch/arm/Kconfig | 7 +-
arch/arm/Kconfig.debug | 2 +-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/mach-msm/Kconfig | 45 +------
arch/arm/mach-msm/Makefile | 6 -
arch/arm/mach-msm/board-dt.c | 41 ------
arch/arm/mach-msm/platsmp.c | 137 -------------------
arch/arm/mach-msm/scm-boot.c | 39 ------
arch/arm/mach-msm/scm-boot.h | 22 ----
arch/arm/mach-msm/scm.c | 299 ------------------------------------------
arch/arm/mach-msm/scm.h | 25 ----
arch/arm/mach-qcom/Kconfig | 33 +++++
arch/arm/mach-qcom/Makefile | 5 +
arch/arm/mach-qcom/board.c | 40 ++++++
arch/arm/mach-qcom/scm-boot.c | 39 ++++++
arch/arm/mach-qcom/scm-boot.h | 22 ++++
arch/arm/mach-qcom/scm.c | 299 ++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-qcom/scm.h | 25 ++++
arch/arm/mach-qcom/smp.c | 137 +++++++++++++++++++
21 files changed, 619 insertions(+), 619 deletions(-)
delete mode 100644 arch/arm/mach-msm/board-dt.c
delete mode 100644 arch/arm/mach-msm/platsmp.c
delete mode 100644 arch/arm/mach-msm/scm-boot.c
delete mode 100644 arch/arm/mach-msm/scm-boot.h
delete mode 100644 arch/arm/mach-msm/scm.c
delete mode 100644 arch/arm/mach-msm/scm.h
create mode 100644 arch/arm/mach-qcom/Kconfig
create mode 100644 arch/arm/mach-qcom/Makefile
create mode 100644 arch/arm/mach-qcom/board.c
create mode 100644 arch/arm/mach-qcom/scm-boot.c
create mode 100644 arch/arm/mach-qcom/scm-boot.h
create mode 100644 arch/arm/mach-qcom/scm.c
create mode 100644 arch/arm/mach-qcom/scm.h
create mode 100644 arch/arm/mach-qcom/smp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index b2cf5cf..402be60 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1167,6 +1167,14 @@ L: [email protected] (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QUALCOMM SUPPORT
+M: Kumar Gala <[email protected]>
+M: David Brown <[email protected]>
+L: [email protected]
+S: Maintained
+F: arch/arm/mach-qcom/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <[email protected]>
L: [email protected] (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e254198..f093f20 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -657,9 +657,8 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM_NODT
- bool "Qualcomm MSM"
- select ARCH_MSM
+config ARCH_MSM
+ bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
@@ -1005,6 +1004,8 @@ source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-qcom/Kconfig"
+
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8..4491c7b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -956,7 +956,7 @@ config DEBUG_STI_UART
config DEBUG_MSM_UART
bool
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
config DEBUG_LL_INCLUDE
string
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef5..51e5bed 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b..c9eaf1f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -118,9 +118,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
@@ -232,6 +229,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 3c4eca7..a7f959e 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
-config ARCH_MSM
- bool
-
-config ARCH_MSM_DT
- bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
- select ARCH_MSM
- select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm's devicetree based MSM systems.
-
if ARCH_MSM
-menu "Qualcomm MSM SoC Selection"
- depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
- bool "Enable support for MSM8X60"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select CLKSRC_QCOM
-
-config ARCH_MSM8960
- bool "Enable support for MSM8960"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select CLKSRC_QCOM
-
-config ARCH_MSM8974
- bool "Enable support for MSM8974"
- select ARM_GIC
- select CPU_V7
- select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
- select MSM_SCM if SMP
-
-endmenu
-
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
@@ -99,7 +58,7 @@ config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 04b1bee..27c078a 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -13,17 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c
deleted file mode 100644
index 1f11d93..0000000
--- a/arch/arm/mach-msm/board-dt.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static const char * const msm_dt_match[] __initconst = {
- "qcom,msm8660-fluid",
- "qcom,msm8660-surf",
- "qcom,msm8960-cdp",
- NULL
-};
-
-static const char * const apq8074_dt_match[] __initconst = {
- "qcom,apq8074-dragonboard",
- NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
- .dt_compat = msm_dt_match,
-MACHINE_END
-
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
- .dt_compat = apq8074_dt_match,
-MACHINE_END
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
deleted file mode 100644
index 251a91e..0000000
--- a/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
-
-#include "scm-boot.h"
-#include "common.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-extern void secondary_startup(void);
-
-static DEFINE_SPINLOCK(boot_lock);
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void __ref msm_cpu_die(unsigned int cpu)
-{
- wfi();
-}
-#endif
-
-static inline int get_core_count(void)
-{
- /* 1 + the PART[1:0] field of MIDR */
- return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-static void msm_secondary_init(unsigned int cpu)
-{
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-static void prepare_cold_cpu(unsigned int cpu)
-{
- int ret;
- ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
- SCM_FLAG_COLDBOOT_CPU1);
- if (ret == 0) {
- void __iomem *sc1_base_ptr;
- sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
- if (sc1_base_ptr) {
- writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
- writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
- writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
- iounmap(sc1_base_ptr);
- }
- } else
- printk(KERN_DEBUG "Failed to set secondary core boot "
- "address\n");
-}
-
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- static int cold_boot_done;
-
- /* Only need to bring cpu out of reset this way once */
- if (cold_boot_done == false) {
- prepare_cold_cpu(cpu);
- cold_boot_done = true;
- }
-
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-static void __init msm_smp_init_cpus(void)
-{
- unsigned int i, ncores = get_core_count();
-
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-struct smp_operations msm_smp_ops __initdata = {
- .smp_init_cpus = msm_smp_init_cpus,
- .smp_prepare_cpus = msm_smp_prepare_cpus,
- .smp_secondary_init = msm_secondary_init,
- .smp_boot_secondary = msm_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = msm_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-msm/scm-boot.c
deleted file mode 100644
index 45cee3e..0000000
--- a/arch/arm/mach-msm/scm-boot.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "scm.h"
-#include "scm-boot.h"
-
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-int scm_set_boot_addr(phys_addr_t addr, int flags)
-{
- struct {
- unsigned int flags;
- phys_addr_t addr;
- } cmd;
-
- cmd.addr = addr;
- cmd.flags = flags;
- return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h
deleted file mode 100644
index 7be32ff..0000000
--- a/arch/arm/mach-msm/scm-boot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
-
-#define SCM_BOOT_ADDR 0x1
-#define SCM_FLAG_COLDBOOT_CPU1 0x1
-#define SCM_FLAG_WARMBOOT_CPU1 0x2
-#define SCM_FLAG_WARMBOOT_CPU0 0x4
-
-int scm_set_boot_addr(phys_addr_t addr, int flags);
-
-#endif
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
deleted file mode 100644
index c536fd6..0000000
--- a/arch/arm/mach-msm/scm.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-
-#include <asm/cacheflush.h>
-
-#include "scm.h"
-
-/* Cache line size for msm8x60 */
-#define CACHELINESIZE 32
-
-#define SCM_ENOMEM -5
-#define SCM_EOPNOTSUPP -4
-#define SCM_EINVAL_ADDR -3
-#define SCM_EINVAL_ARG -2
-#define SCM_ERROR -1
-#define SCM_INTERRUPTED 1
-
-static DEFINE_MUTEX(scm_lock);
-
-/**
- * struct scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- * ------------------- <--- struct scm_command
- * | command header |
- * ------------------- <--- scm_get_command_buffer()
- * | command buffer |
- * ------------------- <--- struct scm_response and
- * | response header | scm_command_to_response()
- * ------------------- <--- scm_get_response_buffer()
- * | response buffer |
- * -------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct scm_command {
- u32 len;
- u32 buf_offset;
- u32 resp_hdr_offset;
- u32 id;
- u32 buf[0];
-};
-
-/**
- * struct scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct scm_response {
- u32 len;
- u32 buf_offset;
- u32 is_complete;
-};
-
-/**
- * alloc_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &scm_command on success or %NULL if the allocation fails.
- */
-static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
- resp_size;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = len;
- cmd->buf_offset = offsetof(struct scm_command, buf);
- cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
- }
- return cmd;
-}
-
-/**
- * free_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_scm_command(struct scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
- * scm_command_to_response() - Get a pointer to a scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct scm_response *scm_command_to_response(
- const struct scm_command *cmd)
-{
- return (void *)cmd + cmd->resp_hdr_offset;
-}
-
-/**
- * scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-{
- return (void *)cmd->buf;
-}
-
-/**
- * scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-{
- return (void *)rsp + rsp->buf_offset;
-}
-
-static int scm_remap_error(int err)
-{
- switch (err) {
- case SCM_ERROR:
- return -EIO;
- case SCM_EINVAL_ADDR:
- case SCM_EINVAL_ARG:
- return -EINVAL;
- case SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
- int context_id;
- register u32 r0 asm("r0") = 1;
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = cmd_addr;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- } while (r0 == SCM_INTERRUPTED);
-
- return r0;
-}
-
-static int __scm_call(const struct scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the entire cache here so callers don't have to remember
- * to flush the cache when passing physical addresses to the secure
- * side in the buffer.
- */
- flush_cache_all();
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = scm_remap_error(ret);
-
- return ret;
-}
-
-/**
- * scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- */
-int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
- void *resp_buf, size_t resp_len)
-{
- int ret;
- struct scm_command *cmd;
- struct scm_response *rsp;
-
- cmd = alloc_scm_command(cmd_len, resp_len);
- if (!cmd)
- return -ENOMEM;
-
- cmd->id = (svc_id << 10) | cmd_id;
- if (cmd_buf)
- memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
- mutex_lock(&scm_lock);
- ret = __scm_call(cmd);
- mutex_unlock(&scm_lock);
- if (ret)
- goto out;
-
- rsp = scm_command_to_response(cmd);
- do {
- u32 start = (u32)rsp;
- u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
- start &= ~(CACHELINESIZE - 1);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += CACHELINESIZE;
- }
- } while (!rsp->is_complete);
-
- if (resp_buf)
- memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-out:
- free_scm_command(cmd);
- return ret;
-}
-EXPORT_SYMBOL(scm_call);
-
-u32 scm_get_version(void)
-{
- int context_id;
- static u32 version = -1;
- register u32 r0 asm("r0");
- register u32 r1 asm("r1");
-
- if (version != -1)
- return version;
-
- mutex_lock(&scm_lock);
-
- r0 = 0x1 << 8;
- r1 = (u32)&context_id;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r1")
- __asmeq("%2", "r0")
- __asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0), "=r" (r1)
- : "r" (r0), "r" (r1)
- : "r2", "r3");
- } while (r0 == SCM_INTERRUPTED);
-
- version = r1;
- mutex_unlock(&scm_lock);
-
- return version;
-}
-EXPORT_SYMBOL(scm_get_version);
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h
deleted file mode 100644
index 00b31ea..0000000
--- a/arch/arm/mach-msm/scm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT 0x1
-#define SCM_SVC_PIL 0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
- void *resp_buf, size_t resp_len);
-
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-
-extern u32 scm_get_version(void);
-
-#endif
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 0000000..755b0db
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+config ARCH_QCOM
+ bool "Qualcomm Support" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select ARM_GIC
+ select HAVE_SMP
+ select QCOM_SCM if SMP
+ help
+ Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8960
+ bool "Enable support for MSM8960"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8974
+ bool "Enable support for MSM8974"
+ select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+ bool
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 0000000..c0ba0ef
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-y := board.o
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
new file mode 100644
index 0000000..4529f6b
--- /dev/null
+++ b/arch/arm/mach-qcom/board.c
@@ -0,0 +1,40 @@
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+extern struct smp_operations msm_smp_ops;
+
+static const char * const qcom_dt_match[] __initconst = {
+ "qcom,msm8660-surf",
+ "qcom,msm8960-cdp",
+ NULL
+};
+
+static const char * const apq8074_dt_match[] __initconst = {
+ "qcom,apq8074-dragonboard",
+ NULL
+};
+
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
+ .dt_compat = qcom_dt_match,
+MACHINE_END
+
+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
+ .dt_compat = apq8074_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
new file mode 100644
index 0000000..45cee3e
--- /dev/null
+++ b/arch/arm/mach-qcom/scm-boot.c
@@ -0,0 +1,39 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "scm.h"
+#include "scm-boot.h"
+
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+int scm_set_boot_addr(phys_addr_t addr, int flags)
+{
+ struct {
+ unsigned int flags;
+ phys_addr_t addr;
+ } cmd;
+
+ cmd.addr = addr;
+ cmd.flags = flags;
+ return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
+}
+EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
new file mode 100644
index 0000000..7be32ff
--- /dev/null
+++ b/arch/arm/mach-qcom/scm-boot.h
@@ -0,0 +1,22 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_SCM_BOOT_H
+#define __MACH_SCM_BOOT_H
+
+#define SCM_BOOT_ADDR 0x1
+#define SCM_FLAG_COLDBOOT_CPU1 0x1
+#define SCM_FLAG_WARMBOOT_CPU1 0x2
+#define SCM_FLAG_WARMBOOT_CPU0 0x4
+
+int scm_set_boot_addr(phys_addr_t addr, int flags);
+
+#endif
diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c
new file mode 100644
index 0000000..c536fd6
--- /dev/null
+++ b/arch/arm/mach-qcom/scm.c
@@ -0,0 +1,299 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/cacheflush.h>
+
+#include "scm.h"
+
+/* Cache line size for msm8x60 */
+#define CACHELINESIZE 32
+
+#define SCM_ENOMEM -5
+#define SCM_EOPNOTSUPP -4
+#define SCM_EINVAL_ADDR -3
+#define SCM_EINVAL_ARG -2
+#define SCM_ERROR -1
+#define SCM_INTERRUPTED 1
+
+static DEFINE_MUTEX(scm_lock);
+
+/**
+ * struct scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ * ------------------- <--- struct scm_command
+ * | command header |
+ * ------------------- <--- scm_get_command_buffer()
+ * | command buffer |
+ * ------------------- <--- struct scm_response and
+ * | response header | scm_command_to_response()
+ * ------------------- <--- scm_get_response_buffer()
+ * | response buffer |
+ * -------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct scm_command {
+ u32 len;
+ u32 buf_offset;
+ u32 resp_hdr_offset;
+ u32 id;
+ u32 buf[0];
+};
+
+/**
+ * struct scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct scm_response {
+ u32 len;
+ u32 buf_offset;
+ u32 is_complete;
+};
+
+/**
+ * alloc_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &scm_command on success or %NULL if the allocation fails.
+ */
+static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
+{
+ struct scm_command *cmd;
+ size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
+ resp_size;
+
+ cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+ if (cmd) {
+ cmd->len = len;
+ cmd->buf_offset = offsetof(struct scm_command, buf);
+ cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
+ }
+ return cmd;
+}
+
+/**
+ * free_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_scm_command(struct scm_command *cmd)
+{
+ kfree(cmd);
+}
+
+/**
+ * scm_command_to_response() - Get a pointer to a scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct scm_response *scm_command_to_response(
+ const struct scm_command *cmd)
+{
+ return (void *)cmd + cmd->resp_hdr_offset;
+}
+
+/**
+ * scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *scm_get_command_buffer(const struct scm_command *cmd)
+{
+ return (void *)cmd->buf;
+}
+
+/**
+ * scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *scm_get_response_buffer(const struct scm_response *rsp)
+{
+ return (void *)rsp + rsp->buf_offset;
+}
+
+static int scm_remap_error(int err)
+{
+ switch (err) {
+ case SCM_ERROR:
+ return -EIO;
+ case SCM_EINVAL_ADDR:
+ case SCM_EINVAL_ARG:
+ return -EINVAL;
+ case SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case SCM_ENOMEM:
+ return -ENOMEM;
+ }
+ return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+ int context_id;
+ register u32 r0 asm("r0") = 1;
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = cmd_addr;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ } while (r0 == SCM_INTERRUPTED);
+
+ return r0;
+}
+
+static int __scm_call(const struct scm_command *cmd)
+{
+ int ret;
+ u32 cmd_addr = virt_to_phys(cmd);
+
+ /*
+ * Flush the entire cache here so callers don't have to remember
+ * to flush the cache when passing physical addresses to the secure
+ * side in the buffer.
+ */
+ flush_cache_all();
+ ret = smc(cmd_addr);
+ if (ret < 0)
+ ret = scm_remap_error(ret);
+
+ return ret;
+}
+
+/**
+ * scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ */
+int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len)
+{
+ int ret;
+ struct scm_command *cmd;
+ struct scm_response *rsp;
+
+ cmd = alloc_scm_command(cmd_len, resp_len);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = (svc_id << 10) | cmd_id;
+ if (cmd_buf)
+ memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+ mutex_lock(&scm_lock);
+ ret = __scm_call(cmd);
+ mutex_unlock(&scm_lock);
+ if (ret)
+ goto out;
+
+ rsp = scm_command_to_response(cmd);
+ do {
+ u32 start = (u32)rsp;
+ u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
+ start &= ~(CACHELINESIZE - 1);
+ while (start < end) {
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+ : "memory");
+ start += CACHELINESIZE;
+ }
+ } while (!rsp->is_complete);
+
+ if (resp_buf)
+ memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
+out:
+ free_scm_command(cmd);
+ return ret;
+}
+EXPORT_SYMBOL(scm_call);
+
+u32 scm_get_version(void)
+{
+ int context_id;
+ static u32 version = -1;
+ register u32 r0 asm("r0");
+ register u32 r1 asm("r1");
+
+ if (version != -1)
+ return version;
+
+ mutex_lock(&scm_lock);
+
+ r0 = 0x1 << 8;
+ r1 = (u32)&context_id;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r0")
+ __asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0), "=r" (r1)
+ : "r" (r0), "r" (r1)
+ : "r2", "r3");
+ } while (r0 == SCM_INTERRUPTED);
+
+ version = r1;
+ mutex_unlock(&scm_lock);
+
+ return version;
+}
+EXPORT_SYMBOL(scm_get_version);
diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h
new file mode 100644
index 0000000..00b31ea
--- /dev/null
+++ b/arch/arm/mach-qcom/scm.h
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_SCM_H
+#define __MACH_SCM_H
+
+#define SCM_SVC_BOOT 0x1
+#define SCM_SVC_PIL 0x2
+
+extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len);
+
+#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 scm_get_version(void);
+
+#endif
diff --git a/arch/arm/mach-qcom/smp.c b/arch/arm/mach-qcom/smp.c
new file mode 100644
index 0000000..67823a7
--- /dev/null
+++ b/arch/arm/mach-qcom/smp.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+extern void secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref msm_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
+static inline int get_core_count(void)
+{
+ /* 1 + the PART[1:0] field of MIDR */
+ return ((read_cpuid_id() >> 4) & 3) + 1;
+}
+
+static void msm_secondary_init(unsigned int cpu)
+{
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static void prepare_cold_cpu(unsigned int cpu)
+{
+ int ret;
+ ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
+ SCM_FLAG_COLDBOOT_CPU1);
+ if (ret == 0) {
+ void __iomem *sc1_base_ptr;
+ sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+ if (sc1_base_ptr) {
+ writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ iounmap(sc1_base_ptr);
+ }
+ } else
+ printk(KERN_DEBUG "Failed to set secondary core boot "
+ "address\n");
+}
+
+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ static int cold_boot_done;
+
+ /* Only need to bring cpu out of reset this way once */
+ if (cold_boot_done == false) {
+ prepare_cold_cpu(cpu);
+ cold_boot_done = true;
+ }
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system. The msm8x60
+ * does not support the ARM SCU, so just set the possible cpu mask to
+ * NR_CPUS.
+ */
+static void __init msm_smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct smp_operations msm_smp_ops __initdata = {
+ .smp_init_cpus = msm_smp_init_cpus,
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
We intent to share the clocksource code for MSM platforms between legacy
and multiplatform supported qcom SoCs.
Acked-by: Olof Johansson <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
---
arch/arm/mach-msm/Kconfig | 13 +-
arch/arm/mach-msm/Makefile | 1 -
arch/arm/mach-msm/timer.c | 333 ---------------------------------------
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/qcom-timer.c | 329 ++++++++++++++++++++++++++++++++++++++
6 files changed, 339 insertions(+), 342 deletions(-)
delete mode 100644 arch/arm/mach-msm/timer.c
create mode 100644 drivers/clocksource/qcom-timer.c
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 9625cf3..3c4eca7 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -21,7 +21,7 @@ config ARCH_MSM8X60
select CPU_V7
select HAVE_SMP
select MSM_SCM if SMP
- select MSM_TIMER
+ select CLKSRC_QCOM
config ARCH_MSM8960
bool "Enable support for MSM8960"
@@ -29,7 +29,7 @@ config ARCH_MSM8960
select CPU_V7
select HAVE_SMP
select MSM_SCM if SMP
- select MSM_TIMER
+ select CLKSRC_QCOM
config ARCH_MSM8974
bool "Enable support for MSM8974"
@@ -54,7 +54,7 @@ config ARCH_MSM7X00A
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
@@ -66,7 +66,7 @@ config ARCH_MSM7X30
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
@@ -78,7 +78,7 @@ config ARCH_QSD8X50
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
endchoice
@@ -153,7 +153,4 @@ config MSM_GPIOMUX
config MSM_SCM
bool
-config MSM_TIMER
- bool
-
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 8327f60..04b1bee 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_MSM_TIMER) += timer.o
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
deleted file mode 100644
index fd16449..0000000
--- a/arch/arm/mach-msm/timer.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-#define TIMER_MATCH_VAL 0x0000
-#define TIMER_COUNT_VAL 0x0004
-#define TIMER_ENABLE 0x0008
-#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
-#define TIMER_ENABLE_EN BIT(0)
-#define TIMER_CLEAR 0x000C
-#define DGT_CLK_CTL 0x10
-#define DGT_CLK_CTL_DIV_4 0x3
-#define TIMER_STS_GPT0_CLR_PEND BIT(10)
-
-#define GPT_HZ 32768
-
-#define MSM_DGT_SHIFT 5
-
-static void __iomem *event_base;
-static void __iomem *sts_base;
-
-static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
- /* Stop the timer tick */
- if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
- u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- ctrl &= ~TIMER_ENABLE_EN;
- writel_relaxed(ctrl, event_base + TIMER_ENABLE);
- }
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static int msm_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-
- ctrl &= ~TIMER_ENABLE_EN;
- writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-
- writel_relaxed(ctrl, event_base + TIMER_CLEAR);
- writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
-
- if (sts_base)
- while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
- cpu_relax();
-
- writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
- return 0;
-}
-
-static void msm_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- u32 ctrl;
-
- ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
-
- switch (mode) {
- case CLOCK_EVT_MODE_RESUME:
- case CLOCK_EVT_MODE_PERIODIC:
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* Timer is enabled in set_next_event */
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- break;
- }
- writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-}
-
-static struct clock_event_device __percpu *msm_evt;
-
-static void __iomem *source_base;
-
-static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
-{
- return readl_relaxed(source_base + TIMER_COUNT_VAL);
-}
-
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
- /*
- * Shift timer count down by a constant due to unreliable lower bits
- * on some targets.
- */
- return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
-static struct clocksource msm_clocksource = {
- .name = "dg_timer",
- .rating = 300,
- .read = msm_read_timer_count,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int msm_timer_irq;
-static int msm_timer_has_ppi;
-
-static int msm_local_timer_setup(struct clock_event_device *evt)
-{
- int cpu = smp_processor_id();
- int err;
-
- evt->irq = msm_timer_irq;
- evt->name = "msm_timer";
- evt->features = CLOCK_EVT_FEAT_ONESHOT;
- evt->rating = 200;
- evt->set_mode = msm_timer_set_mode;
- evt->set_next_event = msm_timer_set_next_event;
- evt->cpumask = cpumask_of(cpu);
-
- clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
-
- if (msm_timer_has_ppi) {
- enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
- } else {
- err = request_irq(evt->irq, msm_timer_interrupt,
- IRQF_TIMER | IRQF_NOBALANCING |
- IRQF_TRIGGER_RISING, "gp_timer", evt);
- if (err)
- pr_err("request_irq failed\n");
- }
-
- return 0;
-}
-
-static void msm_local_timer_stop(struct clock_event_device *evt)
-{
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
- disable_percpu_irq(evt->irq);
-}
-
-static int msm_timer_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- /*
- * Grab cpu pointer in each case to avoid spurious
- * preemptible warnings
- */
- switch (action & ~CPU_TASKS_FROZEN) {
- case CPU_STARTING:
- msm_local_timer_setup(this_cpu_ptr(msm_evt));
- break;
- case CPU_DYING:
- msm_local_timer_stop(this_cpu_ptr(msm_evt));
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block msm_timer_cpu_nb = {
- .notifier_call = msm_timer_cpu_notify,
-};
-
-static u64 notrace msm_sched_clock_read(void)
-{
- return msm_clocksource.read(&msm_clocksource);
-}
-
-static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
- bool percpu)
-{
- struct clocksource *cs = &msm_clocksource;
- int res = 0;
-
- msm_timer_irq = irq;
- msm_timer_has_ppi = percpu;
-
- msm_evt = alloc_percpu(struct clock_event_device);
- if (!msm_evt) {
- pr_err("memory allocation failed for clockevents\n");
- goto err;
- }
-
- if (percpu)
- res = request_percpu_irq(irq, msm_timer_interrupt,
- "gp_timer", msm_evt);
-
- if (res) {
- pr_err("request_percpu_irq failed\n");
- } else {
- res = register_cpu_notifier(&msm_timer_cpu_nb);
- if (res) {
- free_percpu_irq(irq, msm_evt);
- goto err;
- }
-
- /* Immediately configure the timer on the boot CPU */
- msm_local_timer_setup(__this_cpu_ptr(msm_evt));
- }
-
-err:
- writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
- res = clocksource_register_hz(cs, dgt_hz);
- if (res)
- pr_err("clocksource_register failed\n");
- sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
-}
-
-#ifdef CONFIG_OF
-static void __init msm_dt_timer_init(struct device_node *np)
-{
- u32 freq;
- int irq;
- struct resource res;
- u32 percpu_offset;
- void __iomem *base;
- void __iomem *cpu0_base;
-
- base = of_iomap(np, 0);
- if (!base) {
- pr_err("Failed to map event base\n");
- return;
- }
-
- /* We use GPT0 for the clockevent */
- irq = irq_of_parse_and_map(np, 1);
- if (irq <= 0) {
- pr_err("Can't get irq\n");
- return;
- }
-
- /* We use CPU0's DGT for the clocksource */
- if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
- percpu_offset = 0;
-
- if (of_address_to_resource(np, 0, &res)) {
- pr_err("Failed to parse DGT resource\n");
- return;
- }
-
- cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
- if (!cpu0_base) {
- pr_err("Failed to map source base\n");
- return;
- }
-
- if (of_property_read_u32(np, "clock-frequency", &freq)) {
- pr_err("Unknown frequency\n");
- return;
- }
-
- event_base = base + 0x4;
- sts_base = base + 0x88;
- source_base = cpu0_base + 0x24;
- freq /= 4;
- writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
-
- msm_timer_init(freq, 32, irq, !!percpu_offset);
-}
-CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
-CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
-
-static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
- u32 sts)
-{
- void __iomem *base;
-
- base = ioremap(addr, SZ_256);
- if (!base) {
- pr_err("Failed to map timer base\n");
- return -ENOMEM;
- }
- event_base = base + event;
- source_base = base + source;
- if (sts)
- sts_base = base + sts;
-
- return 0;
-}
-
-void __init msm7x01_timer_init(void)
-{
- struct clocksource *cs = &msm_clocksource;
-
- if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
- return;
- cs->read = msm_read_timer_count_shift;
- cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
- /* 600 KHz */
- msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
- false);
-}
-
-void __init msm7x30_timer_init(void)
-{
- if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
- return;
- msm_timer_init(24576000 / 4, 32, 1, false);
-}
-
-void __init qsd8x50_timer_init(void)
-{
- if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
- return;
- msm_timer_init(19200000 / 4, 32, 7, false);
-}
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cd6950f..81caa16 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,7 @@ config VF_PIT_TIMER
bool
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config CLKSRC_QCOM
+ bool
+ depends on ARCH_MSM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c7ca50a..2e0c0cc 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
+obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
new file mode 100644
index 0000000..dca829e
--- /dev/null
+++ b/drivers/clocksource/qcom-timer.c
@@ -0,0 +1,329 @@
+/*
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0004
+#define TIMER_ENABLE 0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
+#define TIMER_ENABLE_EN BIT(0)
+#define TIMER_CLEAR 0x000C
+#define DGT_CLK_CTL 0x10
+#define DGT_CLK_CTL_DIV_4 0x3
+#define TIMER_STS_GPT0_CLR_PEND BIT(10)
+
+#define GPT_HZ 32768
+
+#define MSM_DGT_SHIFT 5
+
+static void __iomem *event_base;
+static void __iomem *sts_base;
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ /* Stop the timer tick */
+ if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
+ u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+ }
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+ writel_relaxed(ctrl, event_base + TIMER_CLEAR);
+ writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
+
+ if (sts_base)
+ while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
+ cpu_relax();
+
+ writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
+ return 0;
+}
+
+static void msm_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ u32 ctrl;
+
+ ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+ ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Timer is enabled in set_next_event */
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ }
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+}
+
+static struct clock_event_device __percpu *msm_evt;
+
+static void __iomem *source_base;
+
+static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
+{
+ return readl_relaxed(source_base + TIMER_COUNT_VAL);
+}
+
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
+static struct clocksource msm_clocksource = {
+ .name = "dg_timer",
+ .rating = 300,
+ .read = msm_read_timer_count,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int msm_timer_irq;
+static int msm_timer_has_ppi;
+
+static int msm_local_timer_setup(struct clock_event_device *evt)
+{
+ int cpu = smp_processor_id();
+ int err;
+
+ evt->irq = msm_timer_irq;
+ evt->name = "msm_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT;
+ evt->rating = 200;
+ evt->set_mode = msm_timer_set_mode;
+ evt->set_next_event = msm_timer_set_next_event;
+ evt->cpumask = cpumask_of(cpu);
+
+ clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
+
+ if (msm_timer_has_ppi) {
+ enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
+ } else {
+ err = request_irq(evt->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING |
+ IRQF_TRIGGER_RISING, "gp_timer", evt);
+ if (err)
+ pr_err("request_irq failed\n");
+ }
+
+ return 0;
+}
+
+static void msm_local_timer_stop(struct clock_event_device *evt)
+{
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
+}
+
+static int msm_timer_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ /*
+ * Grab cpu pointer in each case to avoid spurious
+ * preemptible warnings
+ */
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_STARTING:
+ msm_local_timer_setup(this_cpu_ptr(msm_evt));
+ break;
+ case CPU_DYING:
+ msm_local_timer_stop(this_cpu_ptr(msm_evt));
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block msm_timer_cpu_nb = {
+ .notifier_call = msm_timer_cpu_notify,
+};
+
+static u64 notrace msm_sched_clock_read(void)
+{
+ return msm_clocksource.read(&msm_clocksource);
+}
+
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+ bool percpu)
+{
+ struct clocksource *cs = &msm_clocksource;
+ int res = 0;
+
+ msm_timer_irq = irq;
+ msm_timer_has_ppi = percpu;
+
+ msm_evt = alloc_percpu(struct clock_event_device);
+ if (!msm_evt) {
+ pr_err("memory allocation failed for clockevents\n");
+ goto err;
+ }
+
+ if (percpu)
+ res = request_percpu_irq(irq, msm_timer_interrupt,
+ "gp_timer", msm_evt);
+
+ if (res) {
+ pr_err("request_percpu_irq failed\n");
+ } else {
+ res = register_cpu_notifier(&msm_timer_cpu_nb);
+ if (res) {
+ free_percpu_irq(irq, msm_evt);
+ goto err;
+ }
+
+ /* Immediately configure the timer on the boot CPU */
+ msm_local_timer_setup(__this_cpu_ptr(msm_evt));
+ }
+
+err:
+ writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
+ res = clocksource_register_hz(cs, dgt_hz);
+ if (res)
+ pr_err("clocksource_register failed\n");
+ sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
+}
+
+#ifdef CONFIG_OF
+static void __init msm_dt_timer_init(struct device_node *np)
+{
+ u32 freq;
+ int irq;
+ struct resource res;
+ u32 percpu_offset;
+ void __iomem *base;
+ void __iomem *cpu0_base;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("Failed to map event base\n");
+ return;
+ }
+
+ /* We use GPT0 for the clockevent */
+ irq = irq_of_parse_and_map(np, 1);
+ if (irq <= 0) {
+ pr_err("Can't get irq\n");
+ return;
+ }
+
+ /* We use CPU0's DGT for the clocksource */
+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("Failed to parse DGT resource\n");
+ return;
+ }
+
+ cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
+ if (!cpu0_base) {
+ pr_err("Failed to map source base\n");
+ return;
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", &freq)) {
+ pr_err("Unknown frequency\n");
+ return;
+ }
+
+ event_base = base + 0x4;
+ sts_base = base + 0x88;
+ source_base = cpu0_base + 0x24;
+ freq /= 4;
+ writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
+
+ msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
+#endif
+
+static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
+ u32 sts)
+{
+ void __iomem *base;
+
+ base = ioremap(addr, SZ_256);
+ if (!base) {
+ pr_err("Failed to map timer base\n");
+ return -ENOMEM;
+ }
+ event_base = base + event;
+ source_base = base + source;
+ if (sts)
+ sts_base = base + sts;
+
+ return 0;
+}
+
+void __init msm7x01_timer_init(void)
+{
+ struct clocksource *cs = &msm_clocksource;
+
+ if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
+ return;
+ cs->read = msm_read_timer_count_shift;
+ cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+ /* 600 KHz */
+ msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+ false);
+}
+
+void __init msm7x30_timer_init(void)
+{
+ if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
+ return;
+ msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+void __init qsd8x50_timer_init(void)
+{
+ if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
+ return;
+ msm_timer_init(19200000 / 4, 32, 7, false);
+}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
On 02/04, Kumar Gala wrote:
> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
> index 3721b31..251a91e 100644
> --- a/arch/arm/mach-msm/platsmp.c
> +++ b/arch/arm/mach-msm/platsmp.c
> @@ -29,6 +29,13 @@ extern void secondary_startup(void);
>
> static DEFINE_SPINLOCK(boot_lock);
>
> +#ifdef CONFIG_HOTPLUG_CPU
> +static void __ref msm_cpu_die(unsigned int cpu)
We shouldn't need __ref anymore either right?
> +{
> + wfi();
> +}
> +#endif
> +
> static inline int get_core_count(void)
> {
> /* 1 + the PART[1:0] field of MIDR */
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On 02/04, Kumar Gala wrote:
> We intent to share the clocksource code for MSM platforms between legacy
s/intent/intend/
> and multiplatform supported qcom SoCs.
>
> Acked-by: Olof Johansson <[email protected]>
> Signed-off-by: Kumar Gala <[email protected]>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cd6950f..81caa16 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -140,3 +140,7 @@ config VF_PIT_TIMER
> bool
> help
> Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
> +
> +config CLKSRC_QCOM
> + bool
> + depends on ARCH_MSM
It would be a a little less noisy if you left this as MSM_TIMER
(msm is all over the code in that file anyway). Also, why do we
care about depending on ARCH_MSM here? This is a hidden Kconfig
option anyway.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On Feb 4, 2014, at 5:07 PM, Stephen Boyd <[email protected]> wrote:
> On 02/04, Kumar Gala wrote:
>> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
>> index 3721b31..251a91e 100644
>> --- a/arch/arm/mach-msm/platsmp.c
>> +++ b/arch/arm/mach-msm/platsmp.c
>> @@ -29,6 +29,13 @@ extern void secondary_startup(void);
>>
>> static DEFINE_SPINLOCK(boot_lock);
>>
>> +#ifdef CONFIG_HOTPLUG_CPU
>> +static void __ref msm_cpu_die(unsigned int cpu)
>
> We shouldn't need __ref anymore either right?
I think we might as cpu_die is still marked __ref so I think we need it.
>
>> +{
>> + wfi();
>> +}
>> +#endif
>> +
>> static inline int get_core_count(void)
>> {
>> /* 1 + the PART[1:0] field of MIDR */
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> hosted by The Linux Foundation
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
On Feb 4, 2014, at 5:09 PM, Stephen Boyd <[email protected]> wrote:
> On 02/04, Kumar Gala wrote:
>> We intent to share the clocksource code for MSM platforms between legacy
>
> s/intent/intend/
>
>> and multiplatform supported qcom SoCs.
>>
>> Acked-by: Olof Johansson <[email protected]>
>> Signed-off-by: Kumar Gala <[email protected]>
>
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index cd6950f..81caa16 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -140,3 +140,7 @@ config VF_PIT_TIMER
>> bool
>> help
>> Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
>> +
>> +config CLKSRC_QCOM
>> + bool
>> + depends on ARCH_MSM
>
> It would be a a little less noisy if you left this as MSM_TIMER
> (msm is all over the code in that file anyway). Also, why do we
> care about depending on ARCH_MSM here? This is a hidden Kconfig
> option anyway.
I will drop the depends, but not sure what point in leaving this as MSM_TIMER.
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
On 02/04, Kumar Gala wrote:
>
> On Feb 4, 2014, at 5:09 PM, Stephen Boyd <[email protected]> wrote:
>
> > On 02/04, Kumar Gala wrote:
> >> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> >> index cd6950f..81caa16 100644
> >> --- a/drivers/clocksource/Kconfig
> >> +++ b/drivers/clocksource/Kconfig
> >> @@ -140,3 +140,7 @@ config VF_PIT_TIMER
> >> bool
> >> help
> >> Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
> >> +
> >> +config CLKSRC_QCOM
> >> + bool
> >> + depends on ARCH_MSM
> >
> > It would be a a little less noisy if you left this as MSM_TIMER
> > (msm is all over the code in that file anyway). Also, why do we
> > care about depending on ARCH_MSM here? This is a hidden Kconfig
> > option anyway.
>
> I will drop the depends, but not sure what point in leaving this as MSM_TIMER.
>
Less changes to the Kconfig files if you do that. It's a minor
thing.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On 02/04, Kumar Gala wrote:
> Introduce a new mach-qcom that will support SoCs that intend to be
> multiplatform compatiable while keeping mach-msm to legacy SoC/board
s/compatiable/compatible/
> support that will not transition over to multiplatform.
>
> As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
> to mach-qcom.
>
> Signed-off-by: Kumar Gala <[email protected]>
> diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
> new file mode 100644
> index 0000000..755b0db
> --- /dev/null
> +++ b/arch/arm/mach-qcom/Kconfig
> @@ -0,0 +1,33 @@
> +config ARCH_QCOM
> + bool "Qualcomm Support" if ARCH_MULTI_V7
> + select ARCH_REQUIRE_GPIOLIB
> + select CLKSRC_OF
> + select GENERIC_CLOCKEVENTS
I wonder why this isn't part of CONFIG_ARCH_MULTIPLATFORM.
> + select ARM_GIC
> + select HAVE_SMP
> + select QCOM_SCM if SMP
Please sort this alphabetically.
> + help
> + Support for Qualcomm's devicetree based systems.
> +
> +if ARCH_QCOM
> +
> diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
> new file mode 100644
> index 0000000..c0ba0ef
> --- /dev/null
> +++ b/arch/arm/mach-qcom/Makefile
> @@ -0,0 +1,5 @@
> +obj-y := board.o
> +obj-$(CONFIG_SMP) += smp.o
Everyone else on ARM calls it platsmp.c. Why differ?
> +obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
> +
> +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On 02/04, Kumar Gala wrote:
> This is the splits the Qualcomm MSM platform into legacy support that we will
> not try and convert to multiplatform and multiplatform support.
>
> - k
>
> Changes from v1:
> * Added patch to remove hotplug.c
> * Added patch to rename msm_ to qcom_
> * Changes the Kconfig to drop CPU_V7
> * used wfi() in cpu_die function
> * Added git tree to MAINTAINERS file
What's the plan for this series combined with my SMP series? It
looks like this isn't based on those patches, so we'll have some
conflicts with the msm to qcom rename but it should be fairly
minor.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On Feb 4, 2014, at 6:47 PM, Stephen Boyd <[email protected]> wrote:
> On 02/04, Kumar Gala wrote:
>> This is the splits the Qualcomm MSM platform into legacy support that we will
>> not try and convert to multiplatform and multiplatform support.
>>
>> - k
>>
>> Changes from v1:
>> * Added patch to remove hotplug.c
>> * Added patch to rename msm_ to qcom_
>> * Changes the Kconfig to drop CPU_V7
>> * used wfi() in cpu_die function
>> * Added git tree to MAINTAINERS file
>
> What's the plan for this series combined with my SMP series? It
> looks like this isn't based on those patches, so we'll have some
> conflicts with the msm to qcom rename but it should be fairly
> minor.
I?ve rebased the smp patch series on top of this set, so will post the new version short (hopefully once we close on these).
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
On 02/04, Kumar Gala wrote:
>
> On Feb 4, 2014, at 5:07 PM, Stephen Boyd <[email protected]> wrote:
>
> > On 02/04, Kumar Gala wrote:
> >> diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
> >> index 3721b31..251a91e 100644
> >> --- a/arch/arm/mach-msm/platsmp.c
> >> +++ b/arch/arm/mach-msm/platsmp.c
> >> @@ -29,6 +29,13 @@ extern void secondary_startup(void);
> >>
> >> static DEFINE_SPINLOCK(boot_lock);
> >>
> >> +#ifdef CONFIG_HOTPLUG_CPU
> >> +static void __ref msm_cpu_die(unsigned int cpu)
> >
> > We shouldn't need __ref anymore either right?
>
> I think we might as cpu_die is still marked __ref so I think we need it.
>
Someone should remove __ref from cpu_die() as well. It was only
ever there for __cpuinit but now that __cpuinit is gone it's
useless.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation