Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
Only about the upper left quarter of the monitor is used for displaying the boot messages,
these (and the cursor) are replicated at the right of that area.
Approximately the lower half of the monitor stays black. The output of the xserver
is not affected.
cu,
Knut
On Mon, 21 Apr 2014, Knut Petersen <[email protected]> wrote:
> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
> Only about the upper left quarter of the monitor is used for displaying the boot messages,
> these (and the cursor) are replicated at the right of that area.
Is this before or after i915.ko is loaded?
> Approximately the lower half of the monitor stays black. The output of the xserver
> is not affected.
Most likely the fastest way to root cause is to bisect, please do. To
keep track of all the bugs we have, please file a bug on DRM/Intel at
[1] and while at it attach dmesg with drm.debug=0xe from the boot.
BR,
Jani.
[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
--
Jani Nikula, Intel Open Source Technology Center
On 22.04.2014 13:54, Jani Nikula wrote:
> On Mon, 21 Apr 2014, Knut Petersen <[email protected]> wrote:
>> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
>> Only about the upper left quarter of the monitor is used for displaying the boot messages,
>> these (and the cursor) are replicated at the right of that area.
> Is this before or after i915.ko is loaded?
No .ko, it's compiled directly into the kernel.
First bad commit is d978ef14456a38034f6c0e94a794129501f89200
(drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12)
Probably there needs to be a v13 ;-)
cu,
Knut
>
>> Approximately the lower half of the monitor stays black. The output of the xserver
>> is not affected.
> Most likely the fastest way to root cause is to bisect, please do. To
> keep track of all the bugs we have, please file a bug on DRM/Intel at
> [1] and while at it attach dmesg with drm.debug=0xe from the boot.
>
> BR,
> Jani.
>
>
> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>
>
Knut, thanks for a quick bisect.
Imre, please have a look at the sdvo WARN related to sysfs links in the
dmesg.
Daniel, you have any ideas about the bios fbdev stuff while Jesse's
traveling?
BR,
Jani.
On Tue, 22 Apr 2014, Knut Petersen <[email protected]> wrote:
> On 22.04.2014 13:54, Jani Nikula wrote:
>> On Mon, 21 Apr 2014, Knut Petersen <[email protected]> wrote:
>>> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
>>> Only about the upper left quarter of the monitor is used for displaying the boot messages,
>>> these (and the cursor) are replicated at the right of that area.
>> Is this before or after i915.ko is loaded?
> No .ko, it's compiled directly into the kernel.
>
> First bad commit is d978ef14456a38034f6c0e94a794129501f89200
> (drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12)
>
> Probably there needs to be a v13 ;-)
>
> cu,
> Knut
>
>
>>
>>> Approximately the lower half of the monitor stays black. The output of the xserver
>>> is not affected.
>> Most likely the fastest way to root cause is to bisect, please do. To
>> keep track of all the bugs we have, please file a bug on DRM/Intel at
>> [1] and while at it attach dmesg with drm.debug=0xe from the boot.
>>
>> BR,
>> Jani.
>>
>>
>> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>>
>>
>
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.13.0-main-01064-gd978ef1 (knut@golem) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #131 PREEMPT Tue Apr 22 15:32:59 CEST 2014
> [ 0.000000] Disabled fast string operations
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.3 present.
> [ 0.000000] DMI: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x7f7f0 max_arch_pfn = 0x1000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-F7FFF uncachable
> [ 0.000000] F8000-FBFFF write-through
> [ 0.000000] FC000-FFFFF uncachable
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
> [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
> [ 0.000000] [mem 0x37600000-0x377fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
> [ 0.000000] [mem 0x34000000-0x375fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfdfff]
> [ 0.000000] [mem 0x37800000-0x379fffff] page 2M
> [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
> [ 0.000000] BRK [0x00de1000, 0x00de1fff] PGTABLE
> [ 0.000000] RAMDISK: [mem 0x379fb000-0x37feffff]
> [ 0.000000] Allocated new RAMDISK: [mem 0x37406000-0x379fa331]
> [ 0.000000] Move RAMDISK from [mem 0x379fb000-0x37fef331] to [mem 0x37406000-0x379fa331]
> [ 0.000000] ACPI: RSDP 000f9320 000014 (v00 AOpen )
> [ 0.000000] ACPI: RSDT 7f7f3040 000038 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: FACP 7f7f30c0 000074 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: DSDT 7f7f3180 0042E3 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000E)
> [ 0.000000] ACPI: FACS 7f7f0000 000040
> [ 0.000000] ACPI: MCFG 7f7f7580 00003C (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: APIC 7f7f74c0 00005A (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> [ 0.000000] ACPI: SSDT 7f7f7600 000222 (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
> [ 0.000000] ACPI: SSDT 7f7f7a00 0000E0 (v01 PmRef CpuPm 00003000 INTL 20040311)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 1147MB HIGHMEM available.
> [ 0.000000] 891MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 37bfe000
> [ 0.000000] low ram: 0 - 37bfe000
> [ 0.000000] BRK [0x00de2000, 0x00de2fff] PGTABLE
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
> [ 0.000000] HighMem [mem 0x37bfe000-0x7f7effff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0x7f7effff]
> [ 0.000000] On node 0 totalpages: 522125
> [ 0.000000] free_area_init_node: node 0, pgdat c07ee748, node_mem_map f6416020
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1752 pages used for memmap
> [ 0.000000] Normal zone: 224254 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 2296 pages used for memmap
> [ 0.000000] HighMem zone: 293874 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> [ 0.000000] pcpu-alloc: [0] 0
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520341
> [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-KINGSTON_SKC100S3120G_50026B722C05CA1A-part1 [email protected]/eth0,[email protected]/00:01:80:62:cf:b1 sky2.legacy_pme=1 acpi_enforce_resources=lax drm.debug=0xe 3 resume=/dev/sda3 i915.fastboot=1 pci=use_crs
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f7f0)
> [ 0.000000] Memory: 2051848K/2088500K available (4486K kernel code, 392K rwdata, 2252K rodata, 500K init, 5504K bss, 36652K reserved, 1175496K highmem)
> [ 0.000000] virtual kernel memory layout:
> fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
> pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
> vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
> lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
> .init : 0xc07f9000 - 0xc0876000 ( 500 kB)
> .data : 0xc0561c7f - 0xc07f8100 (2649 kB)
> .text : 0xc0100000 - 0xc0561c7f (4487 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
> [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.000000] ... CHAINHASH_SIZE: 16384
> [ 0.000000] memory used by lock dependency info: 3567 kB
> [ 0.000000] per task-struct memory footprint: 1152 bytes
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 1862.782 MHz processor
> [ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.56 BogoMIPS (lpj=7451128)
> [ 0.008276] pid_max: default: 32768 minimum: 301
> [ 0.008476] Security Framework initialized
> [ 0.008623] AppArmor: AppArmor initialized
> [ 0.008774] Mount-cache hash table entries: 512
> [ 0.010338] Disabled fast string operations
> [ 0.010480] mce: CPU supports 5 MCE banks
> [ 0.010621] CPU0: Thermal monitoring enabled (TM1)
> [ 0.010774] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
> Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
> tlb_flushall_shift: 6
> [ 0.011132] CPU: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
> [ 0.011488] ACPI: Core revision 20131115
> [ 0.020622] ACPI: All ACPI Tables successfully acquired
> [ 0.024017] ftrace: allocating 22743 entries in 45 pages
> [ 0.036596] Performance Events: p6 PMU driver.
> [ 0.036777] ... version: 0
> [ 0.036909] ... bit width: 32
> [ 0.037041] ... generic registers: 2
> [ 0.037173] ... value mask: 00000000ffffffff
> [ 0.037310] ... max period: 000000007fffffff
> [ 0.037446] ... fixed-purpose events: 0
> [ 0.037578] ... event mask: 0000000000000003
> [ 0.040928] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.041531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.044149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.084000] devtmpfs: initialized
> [ 0.084000] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2fff] (12288 bytes)
> [ 0.084000] NET: Registered protocol family 16
> [ 0.084000] cpuidle: using governor ladder
> [ 0.084006] cpuidle: using governor menu
> [ 0.084310] ACPI: bus type PCI registered
> [ 0.084660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.084907] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [ 0.085047] PCI: Using MMCONFIG for extended config space
> [ 0.085183] PCI: Using configuration type 1 for base access
> [ 0.090388] bio: create slab <bio-0> at 0
> [ 0.090801] ACPI: Added _OSI(Module Device)
> [ 0.090936] ACPI: Added _OSI(Processor Device)
> [ 0.091072] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.091206] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.108176] ACPI: Interpreter enabled
> [ 0.108321] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
> [ 0.108617] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> [ 0.108971] ACPI: (supports S0 S3 S4 S5)
> [ 0.109104] ACPI: Using IOAPIC for interrupt routing
> [ 0.109311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.129899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.130047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 0.130402] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> [ 0.131088] PCI host bridge to bus 0000:00
> [ 0.131224] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.131364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.131503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.131644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.131786] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
> [ 0.131927] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff]
> [ 0.132104] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
> [ 0.132605] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
> [ 0.132626] pci 0000:00:02.0: reg 0x10: [mem 0xd5300000-0xd537ffff]
> [ 0.132638] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407]
> [ 0.132652] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
> [ 0.132665] pci 0000:00:02.0: reg 0x1c: [mem 0xd5400000-0xd543ffff]
> [ 0.132984] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
> [ 0.133002] pci 0000:00:02.1: reg 0x10: [mem 0xd5380000-0xd53fffff]
> [ 0.133397] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
> [ 0.133424] pci 0000:00:1b.0: reg 0x10: [mem 0xd5440000-0xd5443fff 64bit]
> [ 0.133538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.133967] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.134209] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
> [ 0.134318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.134539] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.134778] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
> [ 0.134900] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.135121] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.135360] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
> [ 0.135477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.135700] pci 0000:00:1c.2: System wakeup disabled by ACPI
> [ 0.136029] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
> [ 0.136146] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 0.136368] pci 0000:00:1c.3: System wakeup disabled by ACPI
> [ 0.136613] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
> [ 0.136677] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
> [ 0.136916] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.137154] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
> [ 0.137218] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
> [ 0.137457] pci 0000:00:1d.1: System wakeup disabled by ACPI
> [ 0.137695] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
> [ 0.137759] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
> [ 0.137998] pci 0000:00:1d.2: System wakeup disabled by ACPI
> [ 0.138235] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
> [ 0.138299] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
> [ 0.138538] pci 0000:00:1d.3: System wakeup disabled by ACPI
> [ 0.138788] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
> [ 0.138815] pci 0000:00:1d.7: reg 0x10: [mem 0xd5444000-0xd54443ff]
> [ 0.138930] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.139141] pci 0000:00:1d.7: System wakeup disabled by ACPI
> [ 0.139383] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
> [ 0.139668] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 0.139908] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
> [ 0.140046] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> [ 0.140058] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
> [ 0.140306] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH6 GPIO
> [ 0.140452] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
> [ 0.140593] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
> [ 0.141015] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
> [ 0.141039] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
> [ 0.141054] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
> [ 0.141068] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
> [ 0.141082] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
> [ 0.141097] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
> [ 0.141158] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.141459] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
> [ 0.141533] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
> [ 0.141952] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.142095] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
> [ 0.142105] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
> [ 0.142248] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
> [ 0.142283] pci 0000:02:00.0: reg 0x10: [mem 0xd5220000-0xd5223fff 64bit]
> [ 0.142302] pci 0000:02:00.0: reg 0x18: [io 0xa000-0xa0ff]
> [ 0.142363] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
> [ 0.142461] pci 0000:02:00.0: supports D1 D2
> [ 0.142465] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.142583] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.144137] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.144277] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
> [ 0.144285] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
> [ 0.144437] pci 0000:03:00.0: [11ab:4362] type 00 class 0x020000
> [ 0.144471] pci 0000:03:00.0: reg 0x10: [mem 0xd5020000-0xd5023fff 64bit]
> [ 0.144490] pci 0000:03:00.0: reg 0x18: [io 0xb000-0xb0ff]
> [ 0.144551] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
> [ 0.144649] pci 0000:03:00.0: supports D1 D2
> [ 0.144653] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.144771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.145029] pci 0000:00:1c.2: PCI bridge to [bus 03]
> [ 0.145169] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
> [ 0.145177] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
> [ 0.145322] pci 0000:04:00.0: [1095:3132] type 00 class 0x010400
> [ 0.145361] pci 0000:04:00.0: reg 0x10: [mem 0xd5184000-0xd518407f 64bit]
> [ 0.145391] pci 0000:04:00.0: reg 0x18: [mem 0xd5180000-0xd5183fff 64bit]
> [ 0.145411] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc07f]
> [ 0.145448] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
> [ 0.145541] pci 0000:04:00.0: supports D1 D2
> [ 0.145644] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.145908] pci 0000:00:1c.3: PCI bridge to [bus 04]
> [ 0.146048] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
> [ 0.146055] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
> [ 0.146169] pci 0000:05:04.0: [1397:2bd0] type 00 class 0x028000
> [ 0.148008] pci 0000:05:04.0: reg 0x10: [io 0xd000-0xd007]
> [ 0.148025] pci 0000:05:04.0: reg 0x14: [mem 0xd4000000-0xd40000ff]
> [ 0.148128] pci 0000:05:04.0: supports D1 D2
> [ 0.148132] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
> [ 0.148262] pci 0000:05:05.0: [14f1:8800] type 00 class 0x040000
> [ 0.148293] pci 0000:05:05.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
> [ 0.148525] pci 0000:05:05.1: [14f1:8801] type 00 class 0x048000
> [ 0.148552] pci 0000:05:05.1: reg 0x10: [mem 0xd1000000-0xd1ffffff]
> [ 0.148767] pci 0000:05:05.2: [14f1:8802] type 00 class 0x048000
> [ 0.148794] pci 0000:05:05.2: reg 0x10: [mem 0xd2000000-0xd2ffffff]
> [ 0.149010] pci 0000:05:05.4: [14f1:8804] type 00 class 0x048000
> [ 0.149037] pci 0000:05:05.4: reg 0x10: [mem 0xd3000000-0xd3ffffff]
> [ 0.149294] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
> [ 0.149435] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> [ 0.149443] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
> [ 0.149454] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 0.149459] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 0.149464] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.149469] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
> [ 0.149474] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfebfffff] (subtractive decode)
> [ 0.149538] pci_bus 0000:00: on NUMA node 0
> [ 0.151829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> [ 0.152467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
> [ 0.153101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> [ 0.153737] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> [ 0.154371] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> [ 0.155152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> [ 0.155931] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> [ 0.156704] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
> [ 0.157899] ACPI: \_SB_.PCI0: notify handler is installed
> [ 0.158068] Found 1 acpi root devices
> [ 0.158733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.158992] vgaarb: loaded
> [ 0.159123] vgaarb: bridge control possible 0000:00:02.0
> [ 0.159465] SCSI subsystem initialized
> [ 0.159727] libata version 3.00 loaded.
> [ 0.159747] ACPI: bus type USB registered
> [ 0.159934] usbcore: registered new interface driver usbfs
> [ 0.160032] usbcore: registered new interface driver hub
> [ 0.160222] usbcore: registered new device driver usb
> [ 0.160430] PCI: Using ACPI for IRQ routing
> [ 0.168904] PCI: pci_cache_line_size set to 64 bytes
> [ 0.169011] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
> [ 0.169026] e820: reserve RAM buffer [mem 0x7f7f0000-0x7fffffff]
> [ 0.170027] hpet clockevent registered
> [ 0.170034] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.170177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.170403] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> [ 0.172268] Switched to clocksource hpet
> [ 0.192062] AppArmor: AppArmor Filesystem Enabled
> [ 0.192292] pnp: PnP ACPI init
> [ 0.192494] ACPI: bus type PNP registered
> [ 0.193133] system 00:00: [io 0x0b78-0x0b7b] has been reserved
> [ 0.193278] system 00:00: [io 0x0f78-0x0f7b] has been reserved
> [ 0.193419] system 00:00: [io 0x0a78-0x0a7b] has been reserved
> [ 0.193558] system 00:00: [io 0x0e78-0x0e7b] has been reserved
> [ 0.193700] system 00:00: [io 0x0bbc-0x0bbf] has been reserved
> [ 0.193839] system 00:00: [io 0x0fbc-0x0fbf] has been reserved
> [ 0.193980] system 00:00: [io 0x04d0-0x04d1] has been reserved
> [ 0.194119] system 00:00: [io 0x0290-0x0297] has been reserved
> [ 0.194259] system 00:00: [io 0x0880-0x088f] has been reserved
> [ 0.194541] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.194582] pnp 00:01: [dma 4]
> [ 0.194650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.194761] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.194847] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.194945] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.195660] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.196252] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.197211] pnp 00:07: [dma 3]
> [ 0.197323] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
> [ 0.197510] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.197712] system 00:09: [io 0x4000-0x40bf] could not be reserved
> [ 0.197859] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.197981] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.198771] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.198918] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.199426] system 00:0c: [mem 0x000d7800-0x000d7fff] has been reserved
> [ 0.199571] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
> [ 0.199714] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
> [ 0.199858] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
> [ 0.200001] system 00:0c: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
> [ 0.200155] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.200298] system 00:0c: [mem 0x00100000-0x7f7effff] could not be reserved
> [ 0.200441] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.200583] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
> [ 0.200727] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.200868] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.201012] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
> [ 0.201153] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
> [ 0.201296] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
> [ 0.201441] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.201467] pnp: PnP ACPI: found 13 devices
> [ 0.201601] ACPI: bus type PNP unregistered
> [ 0.241904] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
> [ 0.241914] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
> [ 0.241920] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
> [ 0.241935] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
> [ 0.241950] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
> [ 0.241965] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
> [ 0.241988] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
> [ 0.241993] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> [ 0.241999] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> [ 0.242004] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> [ 0.242009] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> [ 0.242014] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> [ 0.242024] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
> [ 0.242171] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
> [ 0.242417] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x806fffff pref]
> [ 0.242660] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80700000-0x809fffff pref]
> [ 0.242903] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80cfffff pref]
> [ 0.243148] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
> [ 0.243290] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.243429] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 0.243572] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
> [ 0.243717] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
> [ 0.243967] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041ffff pref]
> [ 0.244216] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.244355] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
> [ 0.244497] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
> [ 0.244642] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x806fffff pref]
> [ 0.244889] pci 0000:03:00.0: BAR 6: assigned [mem 0x80700000-0x8071ffff pref]
> [ 0.245128] pci 0000:00:1c.2: PCI bridge to [bus 03]
> [ 0.245265] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
> [ 0.245411] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
> [ 0.245555] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x809fffff pref]
> [ 0.245802] pci 0000:04:00.0: BAR 6: assigned [mem 0x80a00000-0x80a7ffff pref]
> [ 0.246044] pci 0000:00:1c.3: PCI bridge to [bus 04]
> [ 0.246181] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
> [ 0.246324] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
> [ 0.246467] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80cfffff pref]
> [ 0.246716] pci 0000:00:1e.0: PCI bridge to [bus 05]
> [ 0.246853] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> [ 0.246998] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
> [ 0.247147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.247152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.247156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.247161] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
> [ 0.247165] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xfebfffff]
> [ 0.247170] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
> [ 0.247174] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
> [ 0.247179] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
> [ 0.247184] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
> [ 0.247188] pci_bus 0000:02: resource 1 [mem 0xd5200000-0xd52fffff]
> [ 0.247192] pci_bus 0000:02: resource 2 [mem 0x80400000-0x806fffff pref]
> [ 0.247197] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
> [ 0.247202] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd50fffff]
> [ 0.247206] pci_bus 0000:03: resource 2 [mem 0x80700000-0x809fffff pref]
> [ 0.247211] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
> [ 0.247215] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd51fffff]
> [ 0.247219] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80cfffff pref]
> [ 0.247224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 0.247228] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd4ffffff]
> [ 0.247233] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
> [ 0.247237] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
> [ 0.247242] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.247246] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
> [ 0.247250] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xfebfffff]
> [ 0.247326] NET: Registered protocol family 2
> [ 0.248104] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> [ 0.248323] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
> [ 0.249510] TCP: Hash tables configured (established 8192 bind 8192)
> [ 0.249731] TCP: reno registered
> [ 0.249867] UDP hash table entries: 512 (order: 3, 40960 bytes)
> [ 0.250144] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
> [ 0.250721] NET: Registered protocol family 1
> [ 0.250882] pci 0000:00:02.0: Boot video device
> [ 1.852022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
> [ 1.852465] PCI: CLS 32 bytes, default 64
> [ 1.852853] Unpacking initramfs...
> [ 2.103109] Freeing initrd memory: 6100K (f7406000 - f79fb000)
> [ 2.103891] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
> [ 2.104297] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
> [ 2.105286] audit: initializing netlink socket (disabled)
> [ 2.105504] type=2000 audit(1398174179.104:1): initialized
> [ 2.145984] bounce pool size: 64 pages
> [ 2.146121] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 2.146615] VFS: Disk quotas dquot_6.5.2
> [ 2.146765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 2.147322] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 2.147796] fuse init (API version 7.22)
> [ 2.148062] msgmni has been set to 1723
> [ 2.161978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 2.162254] io scheduler noop registered
> [ 2.162388] io scheduler deadline registered
> [ 2.162527] io scheduler cfq registered (default)
> [ 2.163007] pcieport 0000:00:1c.0: enabling device (0100 -> 0103)
> [ 2.163645] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
> [ 2.164295] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
> [ 2.164727] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
> [ 2.165139] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
> [ 2.165603] intel_idle: does not run on family 6 model 13
> [ 2.165824] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> [ 2.166146] ACPI: Power Button [PWRB]
> [ 2.166436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 2.166682] ACPI: Power Button [PWRF]
> [ 2.167069] ACPI: Fan [FAN] (on)
> [ 2.167381] ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points
> [ 2.167622] ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points
> [ 2.167861] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling
> [ 2.169578] thermal LNXTHERM:00: registered as thermal_zone0
> [ 2.169717] ACPI: Thermal Zone [THRM] (61 C)
> [ 2.169971] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
> [ 2.190965] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [ 2.212060] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> [ 2.216353] lp: driver loaded but no devices found
> [ 2.216724] Non-volatile memory driver v1.3
> [ 2.216855] Linux agpgart interface v0.103
> [ 2.217101] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
> [ 2.217336] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
> [ 2.218068] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
> [ 2.218520] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
> [ 2.218758] [drm] Initialized drm 1.1.0 20060810
> [ 2.221333] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
> [ 2.221459] [drm:intel_detect_pch], No PCH found?
> [ 2.221465] [drm] Memory usable by graphics device = 256M
> [ 2.221601] [drm:i915_gem_gtt_init], GMADR size = 256M
> [ 2.221604] [drm:i915_gem_gtt_init], GTT stolen size = 8M
> [ 2.222858] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
> [ 2.222864] [drm:intel_opregion_setup], ACPI OpRegion not supported!
> [ 2.222931] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 2.223076] [drm] Driver supports precise vblank timestamp query.
> [ 2.223216] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
> [ 2.223653] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
> [ 2.223659] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> [ 2.223692] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
> [ 2.223698] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> [ 2.223720] [drm:parse_lfp_panel_data], VBT initial LVDS value 40000300
> [ 2.223733] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0
> [ 2.223755] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
> [ 2.223761] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> [ 2.223767] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
> [ 2.223773] [drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
> [ 2.223777] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 72 is found on SDVOC port
> [ 2.223782] [drm:parse_sdvo_device_mapping], SDVO device: dvo=2, addr=72, wiring=0, ddc_pin=29, i2c_pin=5
> [ 2.223833] [drm:parse_mipi], No MIPI BDB found
> [ 2.223922] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
> [ 2.223985] [drm:intel_display_power_get], enabling always-on
> [ 2.224405] [drm:intel_modeset_init], 2 display pipes available.
> [ 2.224508] [drm:intel_crtc_init], swapping pipes & planes for FBC
> [ 2.224512] [drm:intel_modeset_init], pipe A sprite A init failed: -19
> [ 2.224524] [drm:intel_crtc_init], swapping pipes & planes for FBC
> [ 2.224528] [drm:intel_modeset_init], pipe B sprite B init failed: -19
> [ 2.224540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 2.225123] [drm] Skipping LVDS initialization for AOpen i915GMm-HFS
> [ 2.228383] [drm:intel_setup_outputs], probing SDVOB
> [ 2.228388] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
> [ 2.301204] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
> [ 2.313354] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 3C 06 01 01 01 01 00
> [ 2.313362] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
> vendor_id: 2
> device_id: 60
> device_rev_id: 6
> sdvo_version_major: 1
> sdvo_version_minor: 1
> sdvo_inputs_mask: 1
> smooth_scaling: 0
> sharp_scaling: 0
> up_scaling: 0
> down_scaling: 0
> stall_support: 0
> output_flags: 1
> [ 2.313376] [drm:intel_sdvo_dvi_init], initialising DVI device 0
> [ 2.313383] [drm:intel_sdvo_debug_write], SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
> [ 2.318730] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.318736] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
> [ 2.322303] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
> [ 2.325385] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
> [ 2.325475] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
> [ 2.329359] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 2.329365] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
> [ 2.336975] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
> [ 2.336980] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
> [ 2.336985] [drm:intel_setup_outputs], probing SDVOC
> [ 2.336992] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
> [ 2.409700] [drm:intel_sdvo_debug_write], SDVOC: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
> [ 2.421845] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C2 01 01 01 3D 3E 00
> [ 2.421852] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
> vendor_id: 2
> device_id: 194
> device_rev_id: 1
> sdvo_version_major: 1
> sdvo_version_minor: 1
> sdvo_inputs_mask: 1
> smooth_scaling: 1
> sharp_scaling: 1
> up_scaling: 1
> down_scaling: 1
> stall_support: 0
> output_flags: 62
> [ 2.421866] [drm:intel_sdvo_tv_init], initialising TV type 8
> [ 2.421959] [drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00 (SDVO_CMD_SET_TARGET_OUTPUT)
> [ 2.426662] [drm:intel_sdvo_read_response], SDVOC: R: (Success)
> [ 2.426668] [drm:intel_sdvo_debug_write], SDVOC: W: 27 (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
> [ 2.436547] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
> [ 2.436581] [drm:intel_sdvo_debug_write], SDVOC: W: 84 (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
> [ 2.441931] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
> [ 2.441937] [drm:intel_sdvo_debug_write], SDVOC: W: 61 (SDVO_CMD_GET_MAX_OVERSCAN_H)
> [ 2.449558] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
> [ 2.449564] [drm:intel_sdvo_debug_write], SDVOC: W: 62 (SDVO_CMD_GET_OVERSCAN_H)
> [ 2.454913] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
> [ 2.454921] [drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
> [ 2.454927] [drm:intel_sdvo_debug_write], SDVOC: W: 64 (SDVO_CMD_GET_MAX_OVERSCAN_V)
> [ 2.462549] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
> [ 2.462554] [drm:intel_sdvo_debug_write], SDVOC: W: 65 (SDVO_CMD_GET_OVERSCAN_V)
> [ 2.467902] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
> [ 2.467909] [drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
> [ 2.467915] [drm:intel_sdvo_debug_write], SDVOC: W: 67 (SDVO_CMD_GET_MAX_HPOS)
> [ 2.475537] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
> [ 2.475543] [drm:intel_sdvo_debug_write], SDVOC: W: 68 (SDVO_CMD_GET_HPOS)
> [ 2.480891] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
> [ 2.480897] [drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
> [ 2.480902] [drm:intel_sdvo_debug_write], SDVOC: W: 6A (SDVO_CMD_GET_MAX_VPOS)
> [ 2.488523] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
> [ 2.488529] [drm:intel_sdvo_debug_write], SDVOC: W: 6B (SDVO_CMD_GET_VPOS)
> [ 2.493875] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
> [ 2.493881] [drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
> [ 2.493886] [drm:intel_sdvo_debug_write], SDVOC: W: 55 (SDVO_CMD_GET_MAX_SATURATION)
> [ 2.501502] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
> [ 2.501508] [drm:intel_sdvo_debug_write], SDVOC: W: 56 (SDVO_CMD_GET_SATURATION)
> [ 2.506857] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
> [ 2.506863] [drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
> [ 2.506869] [drm:intel_sdvo_debug_write], SDVOC: W: 5E (SDVO_CMD_GET_MAX_CONTRAST)
> [ 2.514491] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
> [ 2.514497] [drm:intel_sdvo_debug_write], SDVOC: W: 5F (SDVO_CMD_GET_CONTRAST)
> [ 2.519846] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
> [ 2.519852] [drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
> [ 2.519857] [drm:intel_sdvo_debug_write], SDVOC: W: 58 (SDVO_CMD_GET_MAX_HUE)
> [ 2.527473] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
> [ 2.527479] [drm:intel_sdvo_debug_write], SDVOC: W: 59 (SDVO_CMD_GET_HUE)
> [ 2.532832] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
> [ 2.532838] [drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
> [ 2.532844] [drm:intel_sdvo_debug_write], SDVOC: W: 6D (SDVO_CMD_GET_MAX_SHARPNESS)
> [ 2.540467] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
> [ 2.540473] [drm:intel_sdvo_debug_write], SDVOC: W: 6E (SDVO_CMD_GET_SHARPNESS)
> [ 2.545819] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
> [ 2.545825] [drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
> [ 2.545830] [drm:intel_sdvo_debug_write], SDVOC: W: 5B (SDVO_CMD_GET_MAX_BRIGHTNESS)
> [ 2.553446] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
> [ 2.553451] [drm:intel_sdvo_debug_write], SDVOC: W: 5C (SDVO_CMD_GET_BRIGHTNESS)
> [ 2.558797] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
> [ 2.558804] [drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
> [ 2.558809] [drm:intel_sdvo_debug_write], SDVOC: W: 7B (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
> [ 2.566432] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
> [ 2.566438] [drm:intel_sdvo_debug_write], SDVOC: W: 50 (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
> [ 2.571783] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
> [ 2.571789] [drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
> [ 2.571795] [drm:intel_sdvo_debug_write], SDVOC: W: 74 (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
> [ 2.579413] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
> [ 2.579418] [drm:intel_sdvo_debug_write], SDVOC: W: 75 (SDVO_CMD_GET_TV_CHROMA_FILTER)
> [ 2.584769] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
> [ 2.584775] [drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
> [ 2.584781] [drm:intel_sdvo_debug_write], SDVOC: W: 77 (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
> [ 2.592397] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 00 00
> [ 2.592402] [drm:intel_sdvo_debug_write], SDVOC: W: 78 (SDVO_CMD_GET_TV_LUMA_FILTER)
> [ 2.597751] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
> [ 2.597757] [drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 0, current 0
> [ 2.597763] [drm:intel_sdvo_debug_write], SDVOC: W: 70 (SDVO_CMD_GET_DOT_CRAWL)
> [ 2.603112] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
> [ 2.603118] [drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
> [ 2.603121] [drm:intel_sdvo_tv_init], initialising TV type 4
> [ 2.603235] ------------[ cut here ]------------
> [ 2.603371] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x68/0x7a()
> [ 2.603605] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/i2c-7/i2c-7'
> [ 2.603841] Modules linked in:
> [ 2.603992] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-main-01064-gd978ef1 #131
> [ 2.604232] Hardware name: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
> [ 2.604367] 00000000 f6079c64 f6079c3c c055593e f6079c54 c012a6a9 c022bc73 f6366000
> [ 2.604781] f6366000 f6367200 f6079c6c c012a6eb 00000009 f6079c64 c06f0720 f6079c80
> [ 2.605194] f6079c90 c022bc73 c06f06d0 000001e6 c06f0720 f6366000 f6367200 f6371c00
> [ 2.605606] Call Trace:
> [ 2.605736] [<c055593e>] dump_stack+0x16/0x18
> [ 2.605871] [<c012a6a9>] warn_slowpath_common+0x5f/0x76
> [ 2.606005] [<c022bc73>] ? sysfs_warn_dup+0x68/0x7a
> [ 2.606139] [<c012a6eb>] warn_slowpath_fmt+0x2b/0x2f
> [ 2.606273] [<c022bc73>] sysfs_warn_dup+0x68/0x7a
> [ 2.606407] [<c022bcaa>] sysfs_add_one+0x25/0x2c
> [ 2.606541] [<c022c567>] sysfs_do_create_link_sd.isra.2+0xc4/0x136
> [ 2.606678] [<c022c5fd>] sysfs_create_link+0x24/0x2e
> [ 2.606814] [<c0405e55>] intel_sdvo_connector_init+0x82/0xa2
> [ 2.606950] [<c0407ad4>] intel_sdvo_tv_init+0x81/0x1cf
> [ 2.607086] [<c0408a7b>] intel_sdvo_init+0x2ef/0x658
> [ 2.607221] [<c039e331>] ? drm_ut_debug_printk+0x41/0x55
> [ 2.607358] [<c03ed664>] intel_modeset_init+0xabd/0xdae
> [ 2.607494] [<c055e27a>] ? preempt_count_sub+0xa8/0xb5
> [ 2.607630] [<c055ae44>] ? _raw_spin_unlock_irqrestore+0x44/0x56
> [ 2.607768] [<c03cfec6>] ? i915_irq_postinstall+0xee/0xf8
> [ 2.607903] [<c039c688>] ? drm_irq_install+0x155/0x1b5
> [ 2.608046] [<c03d0fbf>] ? i965_irq_handler+0x480/0x480
> [ 2.608181] [<c040c7b4>] i915_driver_load+0xa53/0xcc3
> [ 2.608318] [<c039e8cb>] drm_dev_register+0xb8/0x11b
> [ 2.608452] [<c03a04d1>] drm_get_pci_dev+0xec/0x18a
> [ 2.608587] [<c03acd4a>] i915_pci_probe+0x3e/0x47
> [ 2.608722] [<c030d636>] pci_device_probe+0x5c/0xa4
> [ 2.608857] [<c0419fce>] driver_probe_device+0x83/0x17a
> [ 2.608991] [<c041a149>] __driver_attach+0x53/0x6f
> [ 2.609127] [<c0418b32>] bus_for_each_dev+0x58/0x67
> [ 2.609261] [<c0419bf2>] driver_attach+0x19/0x1b
> [ 2.609394] [<c041a0f6>] ? __device_attach+0x31/0x31
> [ 2.609528] [<c0419912>] bus_add_driver+0xd4/0x18b
> [ 2.609661] [<c041a609>] driver_register+0x74/0xa9
> [ 2.609795] [<c030ce6f>] __pci_register_driver+0x4a/0x4d
> [ 2.609932] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
> [ 2.610168] [<c03a05c5>] drm_pci_init+0x56/0xc9
> [ 2.610302] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
> [ 2.610538] [<c082321d>] i915_init+0x62/0x64
> [ 2.610670] [<c01003e7>] do_one_initcall+0x7c/0x105
> [ 2.610805] [<c07f9400>] ? do_early_param+0x3d/0x73
> [ 2.610940] [<c0140cc6>] ? parse_args+0x16c/0x203
> [ 2.611074] [<c07f9a4f>] kernel_init_freeable+0xdb/0x158
> [ 2.611210] [<c054f9fe>] kernel_init+0xd/0xdf
> [ 2.611344] [<c0560937>] ret_from_kernel_thread+0x1b/0x28
> [ 2.611479] [<c054f9f1>] ? rest_init+0xa5/0xa5
> [ 2.611666] ---[ end trace cd346fb3f5b5c52d ]---
> [ 2.613964] [drm:intel_sdvo_init], SDVO output failed to setup on SDVOC
> [ 2.614565] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
> [ 2.614731] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
> [ 2.614737] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: disabled
> [ 2.614743] [drm:intel_modeset_readout_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe A
> [ 2.614750] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.620297] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.620304] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 2.632814] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> [ 2.632820] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 2.645339] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> [ 2.645346] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 2.649684] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> [ 2.649688] [drm:intel_modeset_readout_hw_state], [ENCODER:7:TMDS-7] hw state readout: enabled, pipe A
> [ 2.649694] [drm:intel_modeset_readout_hw_state], [ENCODER:10:TV-10] hw state readout: disabled, pipe A
> [ 2.649700] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
> [ 2.649706] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.655201] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.655205] [drm:intel_modeset_readout_hw_state], [CONNECTOR:8:DVI-D-1] hw state readout: enabled
> [ 2.655210] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:SVIDEO-1] hw state readout: disabled
> [ 2.655213] [drm:intel_modeset_setup_hw_state], [CRTC:3] found active mode:
> [ 2.655219] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
> [ 2.655227] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
> [ 2.655230] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 2.655234] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> [ 2.655239] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.655243] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.655247] [drm:intel_dump_pipe_config], requested mode:
> [ 2.655252] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
> [ 2.655255] [drm:intel_dump_pipe_config], adjusted mode:
> [ 2.655260] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
> [ 2.655266] [drm:intel_dump_crtc_timings], crtc timings: 28320 720 765 873 900 400 412 414 449, type: 0x0 flags: 0x6
> [ 2.655269] [drm:intel_dump_pipe_config], port clock: 113280
> [ 2.655273] [drm:intel_dump_pipe_config], pipe src size: 720x400
> [ 2.655277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 2.655281] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 2.655284] [drm:intel_dump_pipe_config], ips: 0
> [ 2.655288] [drm:intel_dump_pipe_config], double wide: 0
> [ 2.655293] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
> [ 2.655297] [drm:intel_dump_pipe_config], cpu_transcoder: B
> [ 2.655300] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> [ 2.655305] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.655309] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.655313] [drm:intel_dump_pipe_config], requested mode:
> [ 2.655318] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 2.655321] [drm:intel_dump_pipe_config], adjusted mode:
> [ 2.655326] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 2.655331] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
> [ 2.655335] [drm:intel_dump_pipe_config], port clock: 0
> [ 2.655338] [drm:intel_dump_pipe_config], pipe src size: 0x0
> [ 2.655342] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 2.655346] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 2.655349] [drm:intel_dump_pipe_config], ips: 0
> [ 2.655353] [drm:intel_dump_pipe_config], double wide: 0
> [ 2.655361] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.660867] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.660871] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> [ 2.660877] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.666381] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.666386] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> [ 2.666392] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> [ 2.666398] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.671900] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.671904] [drm:check_encoder_state], [ENCODER:10:TV-10]
> [ 2.671909] [drm:check_crtc_state], [CRTC:3]
> [ 2.671925] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.677425] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.677431] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 2.689935] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> [ 2.689941] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 2.702442] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> [ 2.702449] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 2.706782] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> [ 2.706787] [drm:check_crtc_state], [CRTC:4]
> [ 2.706799] [drm:i9xx_get_plane_config], pipe/plane 0/1 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
> [ 2.706804] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
> [ 2.706879] [drm:i915_pages_create_for_stolen], offset=0x0, size=1282048
> [ 2.706966] [drm:intel_alloc_plane_obj], plane fb obj f6373e40
> [ 2.706972] [drm:i915_gem_setup_global_gtt], reserving preallocated space: 0 + 139000
> [ 2.706976] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [139000, ffff000]
> [ 2.709450] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
> [ 2.709471] [drm:i915_pages_create_for_stolen], offset=0x139000, size=131072
> [ 2.709884] [drm] initialized overlay support
> [ 2.710017] [drm:intel_fbdev_init_bios], found possible fb from plane A
> [ 2.710020] [drm:intel_fbdev_init_bios], pipe B not active or no fb, skipping
> [ 2.710024] [drm:intel_fbdev_init_bios], checking plane A for BIOS fb
> [ 2.710028] [drm:intel_fbdev_init_bios], pipe A area: 288000
> [ 2.710031] [drm:intel_fbdev_init_bios], total size 1152000 (bpp 4)
> [ 2.710035] [drm:intel_fbdev_init_bios], fb big enough for plane A (1282048 >= 1152000)
> [ 2.710039] [drm:intel_fbdev_init_bios], pipe B not active, skipping
> [ 2.710044] [drm:intel_fbdev_init_bios], using BIOS fb for initial console
> [ 2.710054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
> [ 2.710059] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
> [ 2.712024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 2.712028] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.712032] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 2.712036] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 2.712368] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.712372] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 2.712375] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 2.712380] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
> [ 2.712402] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
> [ 2.712499] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 2.712505] [drm:connected_sink_compute_bpp], [CONNECTOR:5:VGA-1] checking for sink bpp constrains
> [ 2.712533] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 2.712537] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
> [ 2.712541] [drm:intel_dump_pipe_config], cpu_transcoder: B
> [ 2.712544] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> [ 2.712549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.712553] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.712557] [drm:intel_dump_pipe_config], requested mode:
> [ 2.712562] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
> [ 2.712566] [drm:intel_dump_pipe_config], adjusted mode:
> [ 2.712571] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
> [ 2.712577] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
> [ 2.712580] [drm:intel_dump_pipe_config], port clock: 31500
> [ 2.712584] [drm:intel_dump_pipe_config], pipe src size: 640x480
> [ 2.712588] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 2.712592] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 2.712595] [drm:intel_dump_pipe_config], ips: 0
> [ 2.712599] [drm:intel_dump_pipe_config], double wide: 0
> [ 2.714954] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 2560
> [ 2.714960] [drm:intel_update_fbc], disabled per chip default
> [ 2.714967] [drm:intel_crtc_mode_set], [ENCODER:6:DAC-6] set [MODE:0:640x480]
> [ 2.715720] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> [ 2.715725] [drm:intel_calculate_wm], FIFO entries required for mode: 10
> [ 2.715728] [drm:intel_calculate_wm], FIFO watermark level: 16
> [ 2.715733] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> [ 2.715736] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> [ 2.715739] [drm:intel_calculate_wm], FIFO watermark level: 20
> [ 2.715743] [drm:i9xx_update_wm], FIFO watermarks - A: 16, B: 20
> [ 2.715748] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 16, B: 20, C: 2, SR 1
> [ 2.715752] [drm:i9xx_update_wm], memory self refresh disabled
> [ 2.736020] [drm:intel_update_fbc], more than one pipe active, disabling compression
> [ 2.736030] [drm:intel_connector_check_state], [CONNECTOR:5:VGA-1]
> [ 2.736037] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.741571] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.741575] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> [ 2.741582] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.747093] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.747098] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> [ 2.747104] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> [ 2.747110] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.752626] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.752630] [drm:check_encoder_state], [ENCODER:10:TV-10]
> [ 2.752635] [drm:check_crtc_state], [CRTC:3]
> [ 2.752652] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.758158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.758164] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 2.770686] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> [ 2.770692] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 2.783214] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> [ 2.783220] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 2.787557] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> [ 2.787561] [drm:check_crtc_state], [CRTC:4]
> [ 2.804021] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 2.804025] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.804029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 2.804033] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 2.804374] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 2.804378] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 2.804382] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 2.804385] [drm:intel_crt_load_detect], starting load-detect on CRT
> [ 2.812019] [drm:intel_release_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
> [ 2.812024] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
> [ 2.844985] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> [ 2.844990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> [ 2.844993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> [ 2.844997] [drm:intel_calculate_wm], FIFO watermark level: 20
> [ 2.845000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
> [ 2.845004] [drm:i9xx_update_wm], self-refresh entries: 45
> [ 2.845009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
> [ 2.845014] [drm:i9xx_update_wm], memory self refresh enabled
> [ 2.845017] [drm:intel_update_fbc], disabled per chip default
> [ 2.845031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.850537] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.850541] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> [ 2.850548] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.856056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.856061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> [ 2.856066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> [ 2.856073] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.861589] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.861593] [drm:check_encoder_state], [ENCODER:10:TV-10]
> [ 2.861597] [drm:check_crtc_state], [CRTC:3]
> [ 2.861613] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 2.867118] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.867124] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 2.879645] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> [ 2.879650] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 2.892173] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> [ 2.892179] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 2.896517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> [ 2.896521] [drm:check_crtc_state], [CRTC:4]
> [ 2.896657] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
> [ 2.896662] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1]
> [ 2.896666] [drm:intel_sdvo_detect], [CONNECTOR:8:DVI-D-1]
> [ 2.896672] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
> [ 2.902454] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 2.902458] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
> [ 2.902465] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> [ 2.906363] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> [ 2.943050] [drm:intel_sdvo_get_ddc_modes], [CONNECTOR:8:DVI-D-1]
> [ 2.943057] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> [ 2.946942] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> [ 2.983605] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
> [ 2.983626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1] probed modes :
> [ 2.983633] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 2.983639] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 2.983645] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 2.983651] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 2.983657] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 2.983661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1]
> [ 2.983665] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=1
> [ 2.983670] [drm:intel_get_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
> [ 2.983674] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
> [ 2.983693] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 2.983699] [drm:connected_sink_compute_bpp], [CONNECTOR:9:SVIDEO-1] checking for sink bpp constrains
> [ 2.983703] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
> [ 2.983709] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 2.983713] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
> [ 2.983716] [drm:intel_dump_pipe_config], cpu_transcoder: B
> [ 2.983720] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> [ 2.983724] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.983729] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 2.983732] [drm:intel_dump_pipe_config], requested mode:
> [ 2.983738] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
> [ 2.983741] [drm:intel_dump_pipe_config], adjusted mode:
> [ 2.983747] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
> [ 2.983752] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
> [ 2.983756] [drm:intel_dump_pipe_config], port clock: 108000
> [ 2.983760] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
> [ 2.983764] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 2.983768] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 2.983771] [drm:intel_dump_pipe_config], ips: 0
> [ 2.983774] [drm:intel_dump_pipe_config], double wide: 0
> [ 2.993290] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 5120
> [ 2.993305] [drm:intel_crtc_mode_set], [ENCODER:10:TV-10] set [MODE:0:NTSC 480i]
> [ 2.999122] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> [ 2.999126] [drm:intel_calculate_wm], FIFO entries required for mode: 34
> [ 2.999130] [drm:intel_calculate_wm], FIFO watermark level: -8
> [ 2.999134] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> [ 2.999138] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> [ 2.999141] [drm:intel_calculate_wm], FIFO watermark level: 20
> [ 2.999145] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 20
> [ 2.999150] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 20, C: 2, SR 1
> [ 2.999154] [drm:i9xx_update_wm], memory self refresh disabled
> [ 3.020020] [drm:intel_update_fbc], more than one pipe active, disabling compression
> [ 3.020035] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.025549] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.025554] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> [ 3.025560] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.031068] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.031073] [drm:intel_connector_check_state], [CONNECTOR:9:SVIDEO-1]
> [ 3.031078] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> [ 3.031084] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> [ 3.031090] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.036595] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.036599] [drm:check_encoder_state], [ENCODER:10:TV-10]
> [ 3.036603] [drm:check_crtc_state], [CRTC:3]
> [ 3.036621] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.042131] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.042137] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 3.054659] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> [ 3.054665] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 3.067186] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> [ 3.067192] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 3.071529] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> [ 3.071535] [drm:check_crtc_state], [CRTC:4]
> [ 3.100115] tsc: Refined TSC clocksource calibration: 1862.713 MHz
> [ 3.108021] [drm:intel_tv_detect_type], TV detected: 400c0c07, 7f0000aa
> [ 3.108025] [drm:intel_tv_detect_type], Unrecognised TV connection
> [ 3.140020] [drm:intel_release_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
> [ 3.140026] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
> [ 3.184984] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> [ 3.184989] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> [ 3.184993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> [ 3.184996] [drm:intel_calculate_wm], FIFO watermark level: 20
> [ 3.185000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
> [ 3.185004] [drm:i9xx_update_wm], self-refresh entries: 45
> [ 3.185009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
> [ 3.185013] [drm:i9xx_update_wm], memory self refresh enabled
> [ 3.185017] [drm:intel_update_fbc], disabled per chip default
> [ 3.185031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.190539] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.190544] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> [ 3.190550] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.196056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.196061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> [ 3.196066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> [ 3.196072] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.201576] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.201580] [drm:check_encoder_state], [ENCODER:10:TV-10]
> [ 3.201584] [drm:check_crtc_state], [CRTC:3]
> [ 3.201600] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.207107] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.207113] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 3.219632] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> [ 3.219638] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 3.232158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> [ 3.232165] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 3.236510] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> [ 3.236515] [drm:check_crtc_state], [CRTC:4]
> [ 3.236626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1] disconnected
> [ 3.236631] [drm:drm_setup_crtcs],
> [ 3.236635] [drm:drm_enable_connectors], connector 5 enabled? no
> [ 3.236639] [drm:drm_enable_connectors], connector 8 enabled? yes
> [ 3.236643] [drm:drm_enable_connectors], connector 9 enabled? no
> [ 3.236647] [drm:intel_fb_initial_config], connector 5 not enabled, skipping
> [ 3.236651] [drm:intel_fb_initial_config], looking for cmdline mode on connector 8
> [ 3.236655] [drm:intel_fb_initial_config], looking for preferred mode on connector 8
> [ 3.236659] [drm:intel_fb_initial_config], connector DVI-D-1 on crtc 3: 1280x1024
> [ 3.236663] [drm:intel_fb_initial_config], connector 9 not enabled, skipping
> [ 3.236667] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
> [ 3.236676] [drm:intelfb_create], re-using BIOS fb
> [ 3.236892] [drm:intelfb_create], allocated 720x400 fb: 0x00000000, bo f6373e40
> [ 3.237675] fbcon: inteldrmfb (fb0) is primary device
> [ 3.241496] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> [ 3.241501] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> [ 3.241506] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
> [ 3.241510] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 3.241512] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
> [ 3.241515] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> [ 3.241519] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> [ 3.241523] [drm:connected_sink_compute_bpp], [CONNECTOR:8:DVI-D-1] checking for sink bpp constrains
> [ 3.241526] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO
> [ 3.241540] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 3.241542] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> [ 3.241544] [drm:intel_dump_pipe_config], cpu_transcoder: A
> [ 3.241546] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> [ 3.241549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 3.241551] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 3.241553] [drm:intel_dump_pipe_config], requested mode:
> [ 3.241557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 3.241559] [drm:intel_dump_pipe_config], adjusted mode:
> [ 3.241562] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> [ 3.241566] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
> [ 3.241568] [drm:intel_dump_pipe_config], port clock: 108000
> [ 3.241570] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
> [ 3.241572] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 3.241575] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 3.241576] [drm:intel_dump_pipe_config], ips: 0
> [ 3.241578] [drm:intel_dump_pipe_config], double wide: 0
> [ 3.241583] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
> [ 3.246688] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.260987] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> [ 3.260990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> [ 3.260992] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
> [ 3.260995] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
> [ 3.260998] [drm:i9xx_update_wm], memory self refresh disabled
> [ 3.260999] [drm:intel_update_fbc], no output, disabling
> [ 3.261240] [drm:i9xx_update_plane], Writing base 00000000 00000000 0 0 3200
> [ 3.261248] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024]
> [ 3.261253] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
> [ 3.268071] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.268075] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
> [ 3.273147] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.273153] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
> [ 3.283457] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.283462] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
> [ 3.293770] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.293775] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
> [ 3.297977] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.297982] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE)
> [ 3.302181] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
> [ 3.302187] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
> [ 3.312503] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.312508] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
> [ 3.322809] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.322814] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
> [ 3.327010] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.327784] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> [ 3.327787] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> [ 3.327789] [drm:intel_calculate_wm], FIFO entries required for mode: 34
> [ 3.327791] [drm:intel_calculate_wm], FIFO watermark level: -5
> [ 3.327793] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
> [ 3.327795] [drm:i9xx_update_wm], self-refresh entries: 80
> [ 3.327798] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 15
> [ 3.327802] [drm:i9xx_update_wm], memory self refresh enabled
> [ 3.348019] [drm:intel_update_fbc], disabled per chip default
> [ 3.380022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
> [ 3.384583] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
> [ 3.384587] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
> [ 3.389658] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> [ 3.389666] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.395449] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.395451] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> [ 3.395456] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.401241] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.401245] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> [ 3.401249] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> [ 3.401254] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.407033] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.407036] [drm:check_encoder_state], [ENCODER:10:TV-10]
> [ 3.407038] [drm:check_crtc_state], [CRTC:3]
> [ 3.407056] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> [ 3.412852] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> [ 3.412857] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> [ 3.426023] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 2A 00 98 51 00 2A 40
> [ 3.426028] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> [ 3.439507] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 70 13 00 1E 00 00 00
> [ 3.439512] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> [ 3.444085] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
> [ 3.444087] [drm:check_crtc_state], [CRTC:4]
> [ 3.444093] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
> [ 3.444098] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
> [ 3.444101] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> [ 3.444129] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> [ 3.444134] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> [ 3.444136] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> [ 3.446774] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> [ 3.446779] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> [ 3.446782] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> [ 3.449753] Console: switching to colour frame buffer device 90x25
> [ 3.449760] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> [ 3.449765] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> [ 3.449768] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> [ 3.455199] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 3.456384] i915 0000:00:02.0: registered panic notifier
> [ 3.457613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 3.459287] parport_pc 00:07: reported by Plug and Play ACPI
> [ 3.460641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> [ 3.560558] lp0: using parport0 (interrupt-driven).
> [ 3.564759] loop: module loaded
> [ 3.566136] ACPI Warning: 0x00004028-0x0000402f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
> [ 3.568770] ACPI: This conflict may cause random problems and system instability
> [ 3.570118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 3.572842] ACPI Warning: 0x000040b0-0x000040bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
> [ 3.575761] ACPI: This conflict may cause random problems and system instability
> [ 3.577297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 3.580449] ACPI Warning: 0x00004080-0x000040af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
> [ 3.583752] ACPI: This conflict may cause random problems and system instability
> [ 3.585482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 3.589035] Uniform Multi-Platform E-IDE driver
> [ 3.590849] ide-gd driver 1.18
> [ 3.592566] ide-cd driver 5.00
> [ 3.594437] sata_sil24 0000:04:00.0: version 1.1
> [ 3.595856] scsi0 : sata_sil24
> [ 3.597881] scsi1 : sata_sil24
> [ 3.599576] ata1: SATA max UDMA/100 host m128@0xd5184000 port 0xd5180000 irq 19
> [ 3.601314] ata2: SATA max UDMA/100 host m128@0xd5184000 port 0xd5182000 irq 19
> [ 3.603328] ata_piix 0000:00:1f.2: version 2.13
> [ 3.603623] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> [ 3.606198] scsi2 : ata_piix
> [ 3.607871] scsi3 : ata_piix
> [ 3.609448] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
> [ 3.610913] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
> [ 3.612450] sky2: driver version 1.30
> [ 3.614005] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
> [ 3.615426] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
> [ 3.615990] sky2 0000:02:00.0 eth0: addr 00:01:80:62:25:4b
> [ 3.617863] sky2 0000:03:00.0: Yukon-2 EC chip revision 1
> [ 3.619183] sky2 0000:03:00.0: irq 45 for MSI/MSI-X
> [ 3.619513] sky2 0000:03:00.0 eth1: addr 00:01:80:62:25:4c
> [ 3.620830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 3.622055] ehci-pci: EHCI PCI platform driver
> [ 3.623683] ehci-pci 0000:00:1d.7: EHCI Host Controller
> [ 3.625075] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
> [ 3.630227] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
> [ 3.630292] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd5444000
> [ 3.640021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 3.641536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 3.642578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.643620] usb usb1: Product: EHCI Host Controller
> [ 3.644663] usb usb1: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 ehci_hcd
> [ 3.645769] usb usb1: SerialNumber: 0000:00:1d.7
> [ 3.647888] hub 1-0:1.0: USB hub found
> [ 3.649147] hub 1-0:1.0: 8 ports detected
> [ 3.651481] uhci_hcd: USB Universal Host Controller Interface driver
> [ 3.653001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 3.654178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 3.655367] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
> [ 3.656724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 3.657917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.659136] usb usb2: Product: UHCI Host Controller
> [ 3.660335] usb usb2: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> [ 3.661564] usb usb2: SerialNumber: 0000:00:1d.0
> [ 3.663098] hub 2-0:1.0: USB hub found
> [ 3.664378] hub 2-0:1.0: 2 ports detected
> [ 3.666229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 3.667440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> [ 3.668729] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
> [ 3.670060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 3.671288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.672540] usb usb3: Product: UHCI Host Controller
> [ 3.673782] usb usb3: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> [ 3.675044] usb usb3: SerialNumber: 0000:00:1d.1
> [ 3.676608] hub 3-0:1.0: USB hub found
> [ 3.677842] hub 3-0:1.0: 2 ports detected
> [ 3.679658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 3.680864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> [ 3.682124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
> [ 3.683491] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 3.684736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.685978] usb usb4: Product: UHCI Host Controller
> [ 3.687201] usb usb4: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> [ 3.688460] usb usb4: SerialNumber: 0000:00:1d.2
> [ 3.689990] hub 4-0:1.0: USB hub found
> [ 3.691218] hub 4-0:1.0: 2 ports detected
> [ 3.693001] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 3.694192] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [ 3.695424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
> [ 3.696739] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 3.697965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 3.699207] usb usb5: Product: UHCI Host Controller
> [ 3.700441] usb usb5: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> [ 3.701705] usb usb5: SerialNumber: 0000:00:1d.3
> [ 3.703233] hub 5-0:1.0: USB hub found
> [ 3.704490] hub 5-0:1.0: 2 ports detected
> [ 3.706034] usbcore: registered new interface driver usblp
> [ 3.707276] usbcore: registered new interface driver usb-storage
> [ 3.708533] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 3.709709] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [ 3.713047] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 3.714994] mousedev: PS/2 mouse device common for all mice
> [ 3.717248] input: PC Speaker as /devices/platform/pcspkr/input/input3
> [ 3.718730] rtc_cmos 00:02: RTC can wake from S4
> [ 3.720549] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 3.721854] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
> [ 3.723487] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> [ 3.724891] w83627hf: w83627hf: Found W83627THF chip at 0x290
> [ 3.726201] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \SEN1 1 (20131115/utaddress-251)
> [ 3.729640] ACPI: This conflict may cause random problems and system instability
> [ 3.731040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 3.734295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> [ 3.735750] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x4060)
> [ 3.737604] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 3.739060] device-mapper: uevent: version 1.0.3
> [ 3.740715] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
> [ 3.743911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> [ 3.747832] hidraw: raw HID events driver (C) Jiri Kosina
> [ 3.750358] usbcore: registered new interface driver usbhid
> [ 3.751951] usbhid: USB HID core driver
> [ 3.753692] TCP: cubic registered
> [ 3.755210] Initializing XFRM netlink socket
> [ 3.757156] Using IPI Shortcut mode
> [ 3.758914] registered taskstats version 1
> [ 3.760845] AppArmor: AppArmor sha1 policy hashing enabled
> [ 3.763285] rtc_cmos 00:02: setting system clock to 2014-04-22 13:43:01 UTC (1398174181)
> [ 3.767393] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
> [ 3.769169] PM: Checking hibernation image partition /dev/sda3
> [ 3.776285] tsc: Marking TSC unstable due to cpufreq changes
> [ 3.780763] ata4.00: ATAPI: AOpen DVRW2412PRO, 1.64, max UDMA/33
> [ 3.800255] ata4.00: configured for UDMA/33
> [ 3.804440] ata3.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
> [ 3.807721] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 3.811214] ata3.01: ATA-7: HDT722525DLA380, V44OA91A, max UDMA/133
> [ 3.814472] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 3.832368] ata3.00: configured for UDMA/133
> [ 3.849099] ata3.01: configured for UDMA/133
> [ 3.960127] usb 1-2: new high-speed USB device number 2 using ehci-pci
> [ 4.103316] usb 1-2: New USB device found, idVendor=04b8, idProduct=011b
> [ 4.106371] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 4.109373] usb 1-2: Product: EPSON Scanner
> [ 4.111499] usb 1-2: Manufacturer: EPSON
> [ 4.224106] usb 1-3: new high-speed USB device number 3 using ehci-pci
> [ 4.356693] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
> [ 4.359538] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 4.362453] usb 1-3: Product: USB 2.0 Hub
> [ 4.366019] hub 1-3:1.0: USB hub found
> [ 4.369046] hub 1-3:1.0: 4 ports detected
> [ 4.868063] usb 5-2: new full-speed USB device number 2 using uhci_hcd
> [ 5.055696] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
> [ 5.058754] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 5.061636] usb 5-2: Product: USB Receiver
> [ 5.064371] usb 5-2: Manufacturer: Logitech
> [ 5.077307] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
> [ 5.082613] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
> [ 5.092226] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
> [ 5.096306] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
> [ 5.106935] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2
> [ 5.308198] usb 1-3.4: new full-speed USB device number 5 using ehci-pci
> [ 5.405819] usb 1-3.4: New USB device found, idVendor=03f0, idProduct=1d17
> [ 5.409341] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 5.412910] usb 1-3.4: Product: hp LaserJet 1320 series
> [ 5.416462] usb 1-3.4: Manufacturer: Hewlett-Packard
> [ 5.417994] usb 1-3.4: SerialNumber: 00CNHW646GZH
> [ 5.421067] usblp 1-3.4:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
> [ 5.800070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 5.805665] ata1.00: ATA-8: KINGSTON SKC100S3120G, 501ABBF0, max UDMA/133
> [ 5.809390] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 5.815601] ata1.00: configured for UDMA/100
> [ 5.834084] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC100S 501A PQ: 0 ANSI: 5
> [ 5.843662] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
> [ 5.848453] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.850657] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.852791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.852845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.857891] sda: sda1 sda2 sda3
> [ 5.860857] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 7.932067] ata2: SATA link down (SStatus 0 SControl 0)
> [ 7.948446] scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72201 JP4O PQ: 0 ANSI: 5
> [ 7.955565] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 7.959313] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [ 7.962840] sd 2:0:0:0: [sdb] Write Protect is off
> [ 7.966273] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 7.966355] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 7.969460] scsi 2:0:1:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
> [ 7.972841] sd 2:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
> [ 7.974488] sd 2:0:1:0: [sdc] Write Protect is off
> [ 7.975996] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
> [ 7.976292] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 7.979883] sd 2:0:1:0: Attached scsi generic sg2 type 0
> [ 7.982786] sdb: sdb1 sdb2 sdb3 sdb4
> [ 7.984492] scsi 3:0:0:0: CD-ROM AOPEN DVRW2412PRO 1.64 PQ: 0 ANSI: 5
> [ 7.988948] sd 2:0:0:0: [sdb] Attached SCSI disk
> [ 7.991247] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> [ 7.992779] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 7.994996] sr 3:0:0:0: Attached scsi CD-ROM sr0
> [ 7.995175] sr 3:0:0:0: Attached scsi generic sg3 type 5
> [ 8.058214] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
> [ 8.064585] sd 2:0:1:0: [sdc] Attached SCSI disk
> [ 8.067998] PM: Hibernation image partition 8:3 present
> [ 8.068035] PM: Looking for hibernation image.
> [ 8.071701] PM: Image not found (code -22)
> [ 8.071711] PM: Hibernation image not present or could not be loaded.
> [ 8.072512] Freeing unused kernel memory: 500K (c07f9000 - c0876000)
> [ 8.074558] Write protecting the kernel text: 4488k
> [ 8.076665] Write protecting the kernel read-only data: 2256k
> [ 8.078335] NX-protecting the kernel data: 4728k
> [ 8.196506] systemd-udevd[90]: starting version 208
> [ 8.817893] random: nonblocking pool is initialized
> [ 9.587815] platform microcode: Direct firmware load failed with error -2
> [ 9.591670] platform microcode: Falling back to user helper
> [ 13.472325] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
> [ 13.476038] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 13.476045] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 13.476049] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 13.476054] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 13.476395] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 13.476399] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 13.476403] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 13.476478] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
> [ 14.778136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> [ 14.826261] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
> [ 15.029583] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
> [ 15.118801] NET: Registered protocol family 10
> [ 15.124315] systemd[1]: Inserted module 'ipv6'
> [ 15.126644] systemd[1]: Set hostname to <golem>.
> [ 15.183033] LVM: Logical Volume autoactivation enabled.
> [ 15.185303] LVM: Activation generator successfully completed.
> [ 15.311540] systemd[1]: Starting Remote File Systems (Pre).
> [ 15.316221] systemd[1]: Reached target Remote File Systems (Pre).
> [ 15.317953] systemd[1]: Starting Remote File Systems.
> [ 15.321672] systemd[1]: Reached target Remote File Systems.
> [ 15.323419] systemd[1]: Starting Syslog Socket.
> [ 15.327122] systemd[1]: Listening on Syslog Socket.
> [ 15.328820] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
> [ 15.331851] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
> [ 15.333287] systemd[1]: Starting Delayed Shutdown Socket.
> [ 15.336210] systemd[1]: Listening on Delayed Shutdown Socket.
> [ 15.337533] systemd[1]: Starting LVM2 metadata daemon socket.
> [ 15.340369] systemd[1]: Listening on LVM2 metadata daemon socket.
> [ 15.341702] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
> [ 15.343342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> [ 15.344736] systemd[1]: Starting Paths.
> [ 15.347608] systemd[1]: Reached target Paths.
> [ 15.349096] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
> [ 15.354344] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [ 15.357277] systemd[1]: Starting Encrypted Volumes.
> [ 15.360435] systemd[1]: Reached target Encrypted Volumes.
> [ 15.361957] systemd[1]: Starting Journal Socket.
> [ 15.365335] systemd[1]: Listening on Journal Socket.
> [ 15.366865] systemd[1]: Mounting POSIX Message Queue File System...
> [ 15.375572] systemd[1]: Starting Load Kernel Modules...
> [ 15.382417] systemd[1]: Starting Create list of required static device nodes for the current kernel...
> [ 15.402740] systemd[1]: Started Set Up Additional Binary Formats.
> [ 15.405020] systemd[1]: Starting Setup Virtual Console...
> [ 15.413643] systemd[1]: Starting Create dynamic rule for /dev/root link...
> [ 15.424935] systemd[1]: Starting LSB: Set default boot entry if called...
> [ 15.432288] systemd[1]: Starting Journal Service...
> [ 15.463472] systemd[1]: Started Journal Service.
> [ 15.498137] systemd-journald[202]: Vacuuming done, freed 0 bytes
> [ 15.569620] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> [ 15.569627] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> [ 15.569631] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> [ 15.621781] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
> [ 15.909733] systemd-udevd[241]: starting version 208
> [ 16.379683] Linux video capture interface: v2.00
> [ 16.521180] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
> [ 16.542699] WARNING! power/level is deprecated; use power/control instead
> [ 16.733638] Adding 7119316k swap on /dev/sda3. Priority:-1 extents:1 across:7119316k SS
> [ 17.074286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> [ 17.139216] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=3 (0x14/0x17/0x16/0x0/0x0) type:line
> [ 17.139224] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 17.139229] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
> [ 17.139233] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
> [ 17.139237] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0
> [ 17.139240] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
> [ 17.139244] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
> [ 17.139248] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x1b
> [ 17.139252] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
> [ 17.139257] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
> [ 17.139261] ALSA sound/pci/hda/patch_realtek.c:572 realtek: Enable default setup for auto mode as fallback
> [ 17.162783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
> [ 17.222696] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 17.236290] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 17.255391] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 17.261287] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 17.274087] tveeprom 8-0050: Hauppauge model 69100, rev B4C3, serial# 7900937
> [ 17.292122] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 17.303670] tveeprom 8-0050: MAC address is 00:0d:fe:78:8f:09
> [ 17.315320] tveeprom 8-0050: tuner model is Conexant CX24118A (idx 123, type 4)
> [ 17.321311] tveeprom 8-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> [ 17.329373] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [ 17.335654] tveeprom 8-0050: audio processor is None (idx 0)
> [ 17.347089] tveeprom 8-0050: decoder processor is CX880 (idx 20)
> [ 17.357408] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
> [ 17.367460] cx88[0]: hauppauge eeprom: model=69100
> [ 17.416091] Registered IR keymap rc-hauppauge
> [ 17.418847] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0/input13
> [ 17.431663] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0
> [ 17.449327] IR RC5(x) protocol handler initialized
> [ 17.454480] cx88[0]/2: cx2388x 8802 Driver Manager
> [ 17.457159] cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 17, latency: 32, mmio: 0xd2000000
> [ 17.461726] lirc_dev: IR Remote Control driver registered, major 250
> [ 17.466631] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
> [ 17.472116] IR LIRC bridge handler initialized
> [ 17.482251] cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 17, latency: 32, mmio: 0xd0000000
> [ 17.487398] cx88[0]/0: registered device video0 [v4l2]
> [ 17.497932] cx88[0]/0: registered device vbi0
> [ 17.509908] cx88/2: cx2388x dvb driver version 0.0.9 loaded
> [ 17.511501] cx88/2: registering cx8802 driver, type: dvb access: shared
> [ 17.514289] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
> [ 17.521114] cx88[0]/2: cx2388x based DVB/ATSC card
> [ 17.524146] cx8802_alloc_frontends() allocating 1 frontend(s)
> [ 17.552650] DVB: registering new adapter (cx88[0])
> [ 17.554415] cx88-mpeg driver manager 0000:05:05.2: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
> [ 17.767120] REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
> [ 17.769248] REISERFS (device sdb4): using ordered data mode
> [ 17.770792] reiserfs: using flush barriers
> [ 17.782609] REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> [ 17.787278] REISERFS (device sdb4): checking transaction log (sdb4)
> [ 17.892494] REISERFS (device sdb4): Using r5 hash to sort names
> [ 17.917237] usblp0: removed
> [ 18.063161] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> [ 18.112358] systemd-journald[202]: Received request to flush runtime journal from PID 1
> [ 18.898204] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 19.019782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 19.048657] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 21.004540] sky2 0000:02:00.0 eth0: enabling interface
> [ 21.004816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 21.171576] NET: Registered protocol family 17
> [ 22.799130] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
> [ 22.799313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 23.488060] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
> [ 23.492456] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> [ 23.492470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 23.492479] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> [ 23.492489] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> [ 23.492967] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> [ 23.492978] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> [ 23.492986] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> [ 23.493001] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
--
Jani Nikula, Intel Open Source Technology Center
On 22.04.2014 17:10, Jani Nikula wrote:
> Knut, thanks for a quick bisect.
>
> Imre, please have a look at the sdvo WARN related to sysfs links in the
> dmesg.
>
> Daniel, you have any ideas about the bios fbdev stuff while Jesse's
> traveling?
>
> BR,
> Jani.
Chris already fixed the problem, see https://bugs.freedesktop.org/show_bug.cgi?id=77767
>
>
> On Tue, 22 Apr 2014, Knut Petersen <[email protected]> wrote:
>> On 22.04.2014 13:54, Jani Nikula wrote:
>>> On Mon, 21 Apr 2014, Knut Petersen <[email protected]> wrote:
>>>> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
>>>> Only about the upper left quarter of the monitor is used for displaying the boot messages,
>>>> these (and the cursor) are replicated at the right of that area.
>>> Is this before or after i915.ko is loaded?
>> No .ko, it's compiled directly into the kernel.
>>
>> First bad commit is d978ef14456a38034f6c0e94a794129501f89200
>> (drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12)
>>
>> Probably there needs to be a v13 ;-)
>>
>> cu,
>> Knut
>>
>>
>>>> Approximately the lower half of the monitor stays black. The output of the xserver
>>>> is not affected.
>>> Most likely the fastest way to root cause is to bisect, please do. To
>>> keep track of all the bugs we have, please file a bug on DRM/Intel at
>>> [1] and while at it attach dmesg with drm.debug=0xe from the boot.
>>>
>>> BR,
>>> Jani.
>>>
>>>
>>> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>>>
>>>
>> [ 0.000000] Initializing cgroup subsys cpu
>> [ 0.000000] Linux version 3.13.0-main-01064-gd978ef1 (knut@golem) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #131 PREEMPT Tue Apr 22 15:32:59 CEST 2014
>> [ 0.000000] Disabled fast string operations
>> [ 0.000000] e820: BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
>> [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] usable
>> [ 0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] ACPI NVS
>> [ 0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] ACPI data
>> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] SMBIOS 2.3 present.
>> [ 0.000000] DMI: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
>> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>> [ 0.000000] e820: last_pfn = 0x7f7f0 max_arch_pfn = 0x1000000
>> [ 0.000000] MTRR default type: uncachable
>> [ 0.000000] MTRR fixed ranges enabled:
>> [ 0.000000] 00000-9FFFF write-back
>> [ 0.000000] A0000-F7FFF uncachable
>> [ 0.000000] F8000-FBFFF write-through
>> [ 0.000000] FC000-FFFFF uncachable
>> [ 0.000000] MTRR variable ranges enabled:
>> [ 0.000000] 0 base 000000000 mask F80000000 write-back
>> [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
>> [ 0.000000] 2 disabled
>> [ 0.000000] 3 disabled
>> [ 0.000000] 4 disabled
>> [ 0.000000] 5 disabled
>> [ 0.000000] 6 disabled
>> [ 0.000000] 7 disabled
>> [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
>> [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
>> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
>> [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
>> [ 0.000000] [mem 0x37600000-0x377fffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
>> [ 0.000000] [mem 0x34000000-0x375fffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
>> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
>> [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfdfff]
>> [ 0.000000] [mem 0x37800000-0x379fffff] page 2M
>> [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
>> [ 0.000000] BRK [0x00de1000, 0x00de1fff] PGTABLE
>> [ 0.000000] RAMDISK: [mem 0x379fb000-0x37feffff]
>> [ 0.000000] Allocated new RAMDISK: [mem 0x37406000-0x379fa331]
>> [ 0.000000] Move RAMDISK from [mem 0x379fb000-0x37fef331] to [mem 0x37406000-0x379fa331]
>> [ 0.000000] ACPI: RSDP 000f9320 000014 (v00 AOpen )
>> [ 0.000000] ACPI: RSDT 7f7f3040 000038 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
>> [ 0.000000] ACPI: FACP 7f7f30c0 000074 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
>> [ 0.000000] ACPI: DSDT 7f7f3180 0042E3 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000E)
>> [ 0.000000] ACPI: FACS 7f7f0000 000040
>> [ 0.000000] ACPI: MCFG 7f7f7580 00003C (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
>> [ 0.000000] ACPI: APIC 7f7f74c0 00005A (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
>> [ 0.000000] ACPI: SSDT 7f7f7600 000222 (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
>> [ 0.000000] ACPI: SSDT 7f7f7a00 0000E0 (v01 PmRef CpuPm 00003000 INTL 20040311)
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] 1147MB HIGHMEM available.
>> [ 0.000000] 891MB LOWMEM available.
>> [ 0.000000] mapped low ram: 0 - 37bfe000
>> [ 0.000000] low ram: 0 - 37bfe000
>> [ 0.000000] BRK [0x00de2000, 0x00de2fff] PGTABLE
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
>> [ 0.000000] HighMem [mem 0x37bfe000-0x7f7effff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
>> [ 0.000000] node 0: [mem 0x00100000-0x7f7effff]
>> [ 0.000000] On node 0 totalpages: 522125
>> [ 0.000000] free_area_init_node: node 0, pgdat c07ee748, node_mem_map f6416020
>> [ 0.000000] DMA zone: 32 pages used for memmap
>> [ 0.000000] DMA zone: 0 pages reserved
>> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
>> [ 0.000000] Normal zone: 1752 pages used for memmap
>> [ 0.000000] Normal zone: 224254 pages, LIFO batch:31
>> [ 0.000000] HighMem zone: 2296 pages used for memmap
>> [ 0.000000] HighMem zone: 293874 pages, LIFO batch:31
>> [ 0.000000] Using APIC driver default
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ2 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] nr_irqs_gsi: 40
>> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>> [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
>> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>> [ 0.000000] pcpu-alloc: [0] 0
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520341
>> [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-KINGSTON_SKC100S3120G_50026B722C05CA1A-part1 [email protected]/eth0,[email protected]/00:01:80:62:cf:b1 sky2.legacy_pme=1 acpi_enforce_resources=lax drm.debug=0xe 3 resume=/dev/sda3 i915.fastboot=1 pci=use_crs
>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> [ 0.000000] Initializing CPU#0
>> [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f7f0)
>> [ 0.000000] Memory: 2051848K/2088500K available (4486K kernel code, 392K rwdata, 2252K rodata, 500K init, 5504K bss, 36652K reserved, 1175496K highmem)
>> [ 0.000000] virtual kernel memory layout:
>> fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
>> pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
>> vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
>> lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
>> .init : 0xc07f9000 - 0xc0876000 ( 500 kB)
>> .data : 0xc0561c7f - 0xc07f8100 (2649 kB)
>> .text : 0xc0100000 - 0xc0561c7f (4487 kB)
>> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>> [ 0.000000] Preemptible hierarchical RCU implementation.
>> [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
>> [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
>> [ 0.000000] ... MAX_LOCK_DEPTH: 48
>> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
>> [ 0.000000] ... CLASSHASH_SIZE: 4096
>> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
>> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
>> [ 0.000000] ... CHAINHASH_SIZE: 16384
>> [ 0.000000] memory used by lock dependency info: 3567 kB
>> [ 0.000000] per task-struct memory footprint: 1152 bytes
>> [ 0.000000] tsc: Fast TSC calibration using PIT
>> [ 0.000000] tsc: Detected 1862.782 MHz processor
>> [ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.56 BogoMIPS (lpj=7451128)
>> [ 0.008276] pid_max: default: 32768 minimum: 301
>> [ 0.008476] Security Framework initialized
>> [ 0.008623] AppArmor: AppArmor initialized
>> [ 0.008774] Mount-cache hash table entries: 512
>> [ 0.010338] Disabled fast string operations
>> [ 0.010480] mce: CPU supports 5 MCE banks
>> [ 0.010621] CPU0: Thermal monitoring enabled (TM1)
>> [ 0.010774] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
>> Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
>> tlb_flushall_shift: 6
>> [ 0.011132] CPU: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
>> [ 0.011488] ACPI: Core revision 20131115
>> [ 0.020622] ACPI: All ACPI Tables successfully acquired
>> [ 0.024017] ftrace: allocating 22743 entries in 45 pages
>> [ 0.036596] Performance Events: p6 PMU driver.
>> [ 0.036777] ... version: 0
>> [ 0.036909] ... bit width: 32
>> [ 0.037041] ... generic registers: 2
>> [ 0.037173] ... value mask: 00000000ffffffff
>> [ 0.037310] ... max period: 000000007fffffff
>> [ 0.037446] ... fixed-purpose events: 0
>> [ 0.037578] ... event mask: 0000000000000003
>> [ 0.040928] Enabling APIC mode: Flat. Using 1 I/O APICs
>> [ 0.041531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.044149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>> [ 0.084000] devtmpfs: initialized
>> [ 0.084000] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2fff] (12288 bytes)
>> [ 0.084000] NET: Registered protocol family 16
>> [ 0.084000] cpuidle: using governor ladder
>> [ 0.084006] cpuidle: using governor menu
>> [ 0.084310] ACPI: bus type PCI registered
>> [ 0.084660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ 0.084907] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [ 0.085047] PCI: Using MMCONFIG for extended config space
>> [ 0.085183] PCI: Using configuration type 1 for base access
>> [ 0.090388] bio: create slab <bio-0> at 0
>> [ 0.090801] ACPI: Added _OSI(Module Device)
>> [ 0.090936] ACPI: Added _OSI(Processor Device)
>> [ 0.091072] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 0.091206] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 0.108176] ACPI: Interpreter enabled
>> [ 0.108321] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
>> [ 0.108617] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
>> [ 0.108971] ACPI: (supports S0 S3 S4 S5)
>> [ 0.109104] ACPI: Using IOAPIC for interrupt routing
>> [ 0.109311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>> [ 0.129899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [ 0.130047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>> [ 0.130402] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>> [ 0.131088] PCI host bridge to bus 0000:00
>> [ 0.131224] pci_bus 0000:00: root bus resource [bus 00-ff]
>> [ 0.131364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>> [ 0.131503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>> [ 0.131644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>> [ 0.131786] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>> [ 0.131927] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff]
>> [ 0.132104] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
>> [ 0.132605] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
>> [ 0.132626] pci 0000:00:02.0: reg 0x10: [mem 0xd5300000-0xd537ffff]
>> [ 0.132638] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407]
>> [ 0.132652] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
>> [ 0.132665] pci 0000:00:02.0: reg 0x1c: [mem 0xd5400000-0xd543ffff]
>> [ 0.132984] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
>> [ 0.133002] pci 0000:00:02.1: reg 0x10: [mem 0xd5380000-0xd53fffff]
>> [ 0.133397] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
>> [ 0.133424] pci 0000:00:1b.0: reg 0x10: [mem 0xd5440000-0xd5443fff 64bit]
>> [ 0.133538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> [ 0.133967] pci 0000:00:1b.0: System wakeup disabled by ACPI
>> [ 0.134209] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
>> [ 0.134318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> [ 0.134539] pci 0000:00:1c.0: System wakeup disabled by ACPI
>> [ 0.134778] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
>> [ 0.134900] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>> [ 0.135121] pci 0000:00:1c.1: System wakeup disabled by ACPI
>> [ 0.135360] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
>> [ 0.135477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>> [ 0.135700] pci 0000:00:1c.2: System wakeup disabled by ACPI
>> [ 0.136029] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
>> [ 0.136146] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>> [ 0.136368] pci 0000:00:1c.3: System wakeup disabled by ACPI
>> [ 0.136613] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
>> [ 0.136677] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
>> [ 0.136916] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> [ 0.137154] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
>> [ 0.137218] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
>> [ 0.137457] pci 0000:00:1d.1: System wakeup disabled by ACPI
>> [ 0.137695] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
>> [ 0.137759] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
>> [ 0.137998] pci 0000:00:1d.2: System wakeup disabled by ACPI
>> [ 0.138235] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
>> [ 0.138299] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
>> [ 0.138538] pci 0000:00:1d.3: System wakeup disabled by ACPI
>> [ 0.138788] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
>> [ 0.138815] pci 0000:00:1d.7: reg 0x10: [mem 0xd5444000-0xd54443ff]
>> [ 0.138930] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> [ 0.139141] pci 0000:00:1d.7: System wakeup disabled by ACPI
>> [ 0.139383] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>> [ 0.139668] pci 0000:00:1e.0: System wakeup disabled by ACPI
>> [ 0.139908] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
>> [ 0.140046] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>> [ 0.140058] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
>> [ 0.140306] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH6 GPIO
>> [ 0.140452] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
>> [ 0.140593] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
>> [ 0.141015] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
>> [ 0.141039] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
>> [ 0.141054] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
>> [ 0.141068] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
>> [ 0.141082] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
>> [ 0.141097] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
>> [ 0.141158] pci 0000:00:1f.2: PME# supported from D3hot
>> [ 0.141459] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
>> [ 0.141533] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
>> [ 0.141952] pci 0000:00:1c.0: PCI bridge to [bus 01]
>> [ 0.142095] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
>> [ 0.142105] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
>> [ 0.142248] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
>> [ 0.142283] pci 0000:02:00.0: reg 0x10: [mem 0xd5220000-0xd5223fff 64bit]
>> [ 0.142302] pci 0000:02:00.0: reg 0x18: [io 0xa000-0xa0ff]
>> [ 0.142363] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>> [ 0.142461] pci 0000:02:00.0: supports D1 D2
>> [ 0.142465] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [ 0.142583] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
>> [ 0.144137] pci 0000:00:1c.1: PCI bridge to [bus 02]
>> [ 0.144277] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
>> [ 0.144285] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
>> [ 0.144437] pci 0000:03:00.0: [11ab:4362] type 00 class 0x020000
>> [ 0.144471] pci 0000:03:00.0: reg 0x10: [mem 0xd5020000-0xd5023fff 64bit]
>> [ 0.144490] pci 0000:03:00.0: reg 0x18: [io 0xb000-0xb0ff]
>> [ 0.144551] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>> [ 0.144649] pci 0000:03:00.0: supports D1 D2
>> [ 0.144653] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [ 0.144771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
>> [ 0.145029] pci 0000:00:1c.2: PCI bridge to [bus 03]
>> [ 0.145169] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
>> [ 0.145177] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
>> [ 0.145322] pci 0000:04:00.0: [1095:3132] type 00 class 0x010400
>> [ 0.145361] pci 0000:04:00.0: reg 0x10: [mem 0xd5184000-0xd518407f 64bit]
>> [ 0.145391] pci 0000:04:00.0: reg 0x18: [mem 0xd5180000-0xd5183fff 64bit]
>> [ 0.145411] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc07f]
>> [ 0.145448] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
>> [ 0.145541] pci 0000:04:00.0: supports D1 D2
>> [ 0.145644] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
>> [ 0.145908] pci 0000:00:1c.3: PCI bridge to [bus 04]
>> [ 0.146048] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
>> [ 0.146055] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
>> [ 0.146169] pci 0000:05:04.0: [1397:2bd0] type 00 class 0x028000
>> [ 0.148008] pci 0000:05:04.0: reg 0x10: [io 0xd000-0xd007]
>> [ 0.148025] pci 0000:05:04.0: reg 0x14: [mem 0xd4000000-0xd40000ff]
>> [ 0.148128] pci 0000:05:04.0: supports D1 D2
>> [ 0.148132] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
>> [ 0.148262] pci 0000:05:05.0: [14f1:8800] type 00 class 0x040000
>> [ 0.148293] pci 0000:05:05.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
>> [ 0.148525] pci 0000:05:05.1: [14f1:8801] type 00 class 0x048000
>> [ 0.148552] pci 0000:05:05.1: reg 0x10: [mem 0xd1000000-0xd1ffffff]
>> [ 0.148767] pci 0000:05:05.2: [14f1:8802] type 00 class 0x048000
>> [ 0.148794] pci 0000:05:05.2: reg 0x10: [mem 0xd2000000-0xd2ffffff]
>> [ 0.149010] pci 0000:05:05.4: [14f1:8804] type 00 class 0x048000
>> [ 0.149037] pci 0000:05:05.4: reg 0x10: [mem 0xd3000000-0xd3ffffff]
>> [ 0.149294] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
>> [ 0.149435] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
>> [ 0.149443] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
>> [ 0.149454] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
>> [ 0.149459] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
>> [ 0.149464] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>> [ 0.149469] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>> [ 0.149474] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfebfffff] (subtractive decode)
>> [ 0.149538] pci_bus 0000:00: on NUMA node 0
>> [ 0.151829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>> [ 0.152467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>> [ 0.153101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>> [ 0.153737] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>> [ 0.154371] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>> [ 0.155152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>> [ 0.155931] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>> [ 0.156704] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>> [ 0.157899] ACPI: \_SB_.PCI0: notify handler is installed
>> [ 0.158068] Found 1 acpi root devices
>> [ 0.158733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 0.158992] vgaarb: loaded
>> [ 0.159123] vgaarb: bridge control possible 0000:00:02.0
>> [ 0.159465] SCSI subsystem initialized
>> [ 0.159727] libata version 3.00 loaded.
>> [ 0.159747] ACPI: bus type USB registered
>> [ 0.159934] usbcore: registered new interface driver usbfs
>> [ 0.160032] usbcore: registered new interface driver hub
>> [ 0.160222] usbcore: registered new device driver usb
>> [ 0.160430] PCI: Using ACPI for IRQ routing
>> [ 0.168904] PCI: pci_cache_line_size set to 64 bytes
>> [ 0.169011] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>> [ 0.169026] e820: reserve RAM buffer [mem 0x7f7f0000-0x7fffffff]
>> [ 0.170027] hpet clockevent registered
>> [ 0.170034] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>> [ 0.170177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> [ 0.170403] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>> [ 0.172268] Switched to clocksource hpet
>> [ 0.192062] AppArmor: AppArmor Filesystem Enabled
>> [ 0.192292] pnp: PnP ACPI init
>> [ 0.192494] ACPI: bus type PNP registered
>> [ 0.193133] system 00:00: [io 0x0b78-0x0b7b] has been reserved
>> [ 0.193278] system 00:00: [io 0x0f78-0x0f7b] has been reserved
>> [ 0.193419] system 00:00: [io 0x0a78-0x0a7b] has been reserved
>> [ 0.193558] system 00:00: [io 0x0e78-0x0e7b] has been reserved
>> [ 0.193700] system 00:00: [io 0x0bbc-0x0bbf] has been reserved
>> [ 0.193839] system 00:00: [io 0x0fbc-0x0fbf] has been reserved
>> [ 0.193980] system 00:00: [io 0x04d0-0x04d1] has been reserved
>> [ 0.194119] system 00:00: [io 0x0290-0x0297] has been reserved
>> [ 0.194259] system 00:00: [io 0x0880-0x088f] has been reserved
>> [ 0.194541] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 0.194582] pnp 00:01: [dma 4]
>> [ 0.194650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>> [ 0.194761] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>> [ 0.194847] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>> [ 0.194945] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>> [ 0.195660] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>> [ 0.196252] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>> [ 0.197211] pnp 00:07: [dma 3]
>> [ 0.197323] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
>> [ 0.197510] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>> [ 0.197712] system 00:09: [io 0x4000-0x40bf] could not be reserved
>> [ 0.197859] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 0.197981] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
>> [ 0.198771] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
>> [ 0.198918] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 0.199426] system 00:0c: [mem 0x000d7800-0x000d7fff] has been reserved
>> [ 0.199571] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
>> [ 0.199714] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
>> [ 0.199858] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
>> [ 0.200001] system 00:0c: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
>> [ 0.200155] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>> [ 0.200298] system 00:0c: [mem 0x00100000-0x7f7effff] could not be reserved
>> [ 0.200441] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>> [ 0.200583] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
>> [ 0.200727] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
>> [ 0.200868] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
>> [ 0.201012] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
>> [ 0.201153] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
>> [ 0.201296] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
>> [ 0.201441] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>> [ 0.201467] pnp: PnP ACPI: found 13 devices
>> [ 0.201601] ACPI: bus type PNP unregistered
>> [ 0.241904] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
>> [ 0.241914] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>> [ 0.241920] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
>> [ 0.241935] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
>> [ 0.241950] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
>> [ 0.241965] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
>> [ 0.241988] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>> [ 0.241993] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>> [ 0.241999] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
>> [ 0.242004] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
>> [ 0.242009] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
>> [ 0.242014] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
>> [ 0.242024] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
>> [ 0.242171] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
>> [ 0.242417] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x806fffff pref]
>> [ 0.242660] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80700000-0x809fffff pref]
>> [ 0.242903] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80cfffff pref]
>> [ 0.243148] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
>> [ 0.243290] pci 0000:00:1c.0: PCI bridge to [bus 01]
>> [ 0.243429] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
>> [ 0.243572] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
>> [ 0.243717] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
>> [ 0.243967] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041ffff pref]
>> [ 0.244216] pci 0000:00:1c.1: PCI bridge to [bus 02]
>> [ 0.244355] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
>> [ 0.244497] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
>> [ 0.244642] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x806fffff pref]
>> [ 0.244889] pci 0000:03:00.0: BAR 6: assigned [mem 0x80700000-0x8071ffff pref]
>> [ 0.245128] pci 0000:00:1c.2: PCI bridge to [bus 03]
>> [ 0.245265] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
>> [ 0.245411] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
>> [ 0.245555] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x809fffff pref]
>> [ 0.245802] pci 0000:04:00.0: BAR 6: assigned [mem 0x80a00000-0x80a7ffff pref]
>> [ 0.246044] pci 0000:00:1c.3: PCI bridge to [bus 04]
>> [ 0.246181] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
>> [ 0.246324] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
>> [ 0.246467] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80cfffff pref]
>> [ 0.246716] pci 0000:00:1e.0: PCI bridge to [bus 05]
>> [ 0.246853] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
>> [ 0.246998] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
>> [ 0.247147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>> [ 0.247152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>> [ 0.247156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 0.247161] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>> [ 0.247165] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xfebfffff]
>> [ 0.247170] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
>> [ 0.247174] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
>> [ 0.247179] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
>> [ 0.247184] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
>> [ 0.247188] pci_bus 0000:02: resource 1 [mem 0xd5200000-0xd52fffff]
>> [ 0.247192] pci_bus 0000:02: resource 2 [mem 0x80400000-0x806fffff pref]
>> [ 0.247197] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
>> [ 0.247202] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd50fffff]
>> [ 0.247206] pci_bus 0000:03: resource 2 [mem 0x80700000-0x809fffff pref]
>> [ 0.247211] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
>> [ 0.247215] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd51fffff]
>> [ 0.247219] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80cfffff pref]
>> [ 0.247224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
>> [ 0.247228] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd4ffffff]
>> [ 0.247233] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
>> [ 0.247237] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
>> [ 0.247242] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 0.247246] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
>> [ 0.247250] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xfebfffff]
>> [ 0.247326] NET: Registered protocol family 2
>> [ 0.248104] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>> [ 0.248323] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
>> [ 0.249510] TCP: Hash tables configured (established 8192 bind 8192)
>> [ 0.249731] TCP: reno registered
>> [ 0.249867] UDP hash table entries: 512 (order: 3, 40960 bytes)
>> [ 0.250144] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
>> [ 0.250721] NET: Registered protocol family 1
>> [ 0.250882] pci 0000:00:02.0: Boot video device
>> [ 1.852022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>> [ 1.852465] PCI: CLS 32 bytes, default 64
>> [ 1.852853] Unpacking initramfs...
>> [ 2.103109] Freeing initrd memory: 6100K (f7406000 - f79fb000)
>> [ 2.103891] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
>> [ 2.104297] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
>> [ 2.105286] audit: initializing netlink socket (disabled)
>> [ 2.105504] type=2000 audit(1398174179.104:1): initialized
>> [ 2.145984] bounce pool size: 64 pages
>> [ 2.146121] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 2.146615] VFS: Disk quotas dquot_6.5.2
>> [ 2.146765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [ 2.147322] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>> [ 2.147796] fuse init (API version 7.22)
>> [ 2.148062] msgmni has been set to 1723
>> [ 2.161978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>> [ 2.162254] io scheduler noop registered
>> [ 2.162388] io scheduler deadline registered
>> [ 2.162527] io scheduler cfq registered (default)
>> [ 2.163007] pcieport 0000:00:1c.0: enabling device (0100 -> 0103)
>> [ 2.163645] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>> [ 2.164295] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>> [ 2.164727] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>> [ 2.165139] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
>> [ 2.165603] intel_idle: does not run on family 6 model 13
>> [ 2.165824] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>> [ 2.166146] ACPI: Power Button [PWRB]
>> [ 2.166436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>> [ 2.166682] ACPI: Power Button [PWRF]
>> [ 2.167069] ACPI: Fan [FAN] (on)
>> [ 2.167381] ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points
>> [ 2.167622] ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points
>> [ 2.167861] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling
>> [ 2.169578] thermal LNXTHERM:00: registered as thermal_zone0
>> [ 2.169717] ACPI: Thermal Zone [THRM] (61 C)
>> [ 2.169971] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
>> [ 2.190965] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>> [ 2.212060] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>> [ 2.216353] lp: driver loaded but no devices found
>> [ 2.216724] Non-volatile memory driver v1.3
>> [ 2.216855] Linux agpgart interface v0.103
>> [ 2.217101] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>> [ 2.217336] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>> [ 2.218068] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>> [ 2.218520] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>> [ 2.218758] [drm] Initialized drm 1.1.0 20060810
>> [ 2.221333] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
>> [ 2.221459] [drm:intel_detect_pch], No PCH found?
>> [ 2.221465] [drm] Memory usable by graphics device = 256M
>> [ 2.221601] [drm:i915_gem_gtt_init], GMADR size = 256M
>> [ 2.221604] [drm:i915_gem_gtt_init], GTT stolen size = 8M
>> [ 2.222858] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
>> [ 2.222864] [drm:intel_opregion_setup], ACPI OpRegion not supported!
>> [ 2.222931] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [ 2.223076] [drm] Driver supports precise vblank timestamp query.
>> [ 2.223216] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
>> [ 2.223653] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>> [ 2.223659] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>> [ 2.223692] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>> [ 2.223698] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>> [ 2.223720] [drm:parse_lfp_panel_data], VBT initial LVDS value 40000300
>> [ 2.223733] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0
>> [ 2.223755] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>> [ 2.223761] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>> [ 2.223767] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
>> [ 2.223773] [drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
>> [ 2.223777] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 72 is found on SDVOC port
>> [ 2.223782] [drm:parse_sdvo_device_mapping], SDVO device: dvo=2, addr=72, wiring=0, ddc_pin=29, i2c_pin=5
>> [ 2.223833] [drm:parse_mipi], No MIPI BDB found
>> [ 2.223922] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
>> [ 2.223985] [drm:intel_display_power_get], enabling always-on
>> [ 2.224405] [drm:intel_modeset_init], 2 display pipes available.
>> [ 2.224508] [drm:intel_crtc_init], swapping pipes & planes for FBC
>> [ 2.224512] [drm:intel_modeset_init], pipe A sprite A init failed: -19
>> [ 2.224524] [drm:intel_crtc_init], swapping pipes & planes for FBC
>> [ 2.224528] [drm:intel_modeset_init], pipe B sprite B init failed: -19
>> [ 2.224540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>> [ 2.225123] [drm] Skipping LVDS initialization for AOpen i915GMm-HFS
>> [ 2.228383] [drm:intel_setup_outputs], probing SDVOB
>> [ 2.228388] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
>> [ 2.301204] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
>> [ 2.313354] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 3C 06 01 01 01 01 00
>> [ 2.313362] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
>> vendor_id: 2
>> device_id: 60
>> device_rev_id: 6
>> sdvo_version_major: 1
>> sdvo_version_minor: 1
>> sdvo_inputs_mask: 1
>> smooth_scaling: 0
>> sharp_scaling: 0
>> up_scaling: 0
>> down_scaling: 0
>> stall_support: 0
>> output_flags: 1
>> [ 2.313376] [drm:intel_sdvo_dvi_init], initialising DVI device 0
>> [ 2.313383] [drm:intel_sdvo_debug_write], SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
>> [ 2.318730] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.318736] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
>> [ 2.322303] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
>> [ 2.325385] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
>> [ 2.325475] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
>> [ 2.329359] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 2.329365] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>> [ 2.336975] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
>> [ 2.336980] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>> [ 2.336985] [drm:intel_setup_outputs], probing SDVOC
>> [ 2.336992] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
>> [ 2.409700] [drm:intel_sdvo_debug_write], SDVOC: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
>> [ 2.421845] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C2 01 01 01 3D 3E 00
>> [ 2.421852] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
>> vendor_id: 2
>> device_id: 194
>> device_rev_id: 1
>> sdvo_version_major: 1
>> sdvo_version_minor: 1
>> sdvo_inputs_mask: 1
>> smooth_scaling: 1
>> sharp_scaling: 1
>> up_scaling: 1
>> down_scaling: 1
>> stall_support: 0
>> output_flags: 62
>> [ 2.421866] [drm:intel_sdvo_tv_init], initialising TV type 8
>> [ 2.421959] [drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00 (SDVO_CMD_SET_TARGET_OUTPUT)
>> [ 2.426662] [drm:intel_sdvo_read_response], SDVOC: R: (Success)
>> [ 2.426668] [drm:intel_sdvo_debug_write], SDVOC: W: 27 (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
>> [ 2.436547] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
>> [ 2.436581] [drm:intel_sdvo_debug_write], SDVOC: W: 84 (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
>> [ 2.441931] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
>> [ 2.441937] [drm:intel_sdvo_debug_write], SDVOC: W: 61 (SDVO_CMD_GET_MAX_OVERSCAN_H)
>> [ 2.449558] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>> [ 2.449564] [drm:intel_sdvo_debug_write], SDVOC: W: 62 (SDVO_CMD_GET_OVERSCAN_H)
>> [ 2.454913] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>> [ 2.454921] [drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
>> [ 2.454927] [drm:intel_sdvo_debug_write], SDVOC: W: 64 (SDVO_CMD_GET_MAX_OVERSCAN_V)
>> [ 2.462549] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
>> [ 2.462554] [drm:intel_sdvo_debug_write], SDVOC: W: 65 (SDVO_CMD_GET_OVERSCAN_V)
>> [ 2.467902] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
>> [ 2.467909] [drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
>> [ 2.467915] [drm:intel_sdvo_debug_write], SDVOC: W: 67 (SDVO_CMD_GET_MAX_HPOS)
>> [ 2.475537] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>> [ 2.475543] [drm:intel_sdvo_debug_write], SDVOC: W: 68 (SDVO_CMD_GET_HPOS)
>> [ 2.480891] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>> [ 2.480897] [drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
>> [ 2.480902] [drm:intel_sdvo_debug_write], SDVOC: W: 6A (SDVO_CMD_GET_MAX_VPOS)
>> [ 2.488523] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
>> [ 2.488529] [drm:intel_sdvo_debug_write], SDVOC: W: 6B (SDVO_CMD_GET_VPOS)
>> [ 2.493875] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
>> [ 2.493881] [drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
>> [ 2.493886] [drm:intel_sdvo_debug_write], SDVOC: W: 55 (SDVO_CMD_GET_MAX_SATURATION)
>> [ 2.501502] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
>> [ 2.501508] [drm:intel_sdvo_debug_write], SDVOC: W: 56 (SDVO_CMD_GET_SATURATION)
>> [ 2.506857] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
>> [ 2.506863] [drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
>> [ 2.506869] [drm:intel_sdvo_debug_write], SDVOC: W: 5E (SDVO_CMD_GET_MAX_CONTRAST)
>> [ 2.514491] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>> [ 2.514497] [drm:intel_sdvo_debug_write], SDVOC: W: 5F (SDVO_CMD_GET_CONTRAST)
>> [ 2.519846] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>> [ 2.519852] [drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
>> [ 2.519857] [drm:intel_sdvo_debug_write], SDVOC: W: 58 (SDVO_CMD_GET_MAX_HUE)
>> [ 2.527473] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
>> [ 2.527479] [drm:intel_sdvo_debug_write], SDVOC: W: 59 (SDVO_CMD_GET_HUE)
>> [ 2.532832] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
>> [ 2.532838] [drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
>> [ 2.532844] [drm:intel_sdvo_debug_write], SDVOC: W: 6D (SDVO_CMD_GET_MAX_SHARPNESS)
>> [ 2.540467] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
>> [ 2.540473] [drm:intel_sdvo_debug_write], SDVOC: W: 6E (SDVO_CMD_GET_SHARPNESS)
>> [ 2.545819] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
>> [ 2.545825] [drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
>> [ 2.545830] [drm:intel_sdvo_debug_write], SDVOC: W: 5B (SDVO_CMD_GET_MAX_BRIGHTNESS)
>> [ 2.553446] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
>> [ 2.553451] [drm:intel_sdvo_debug_write], SDVOC: W: 5C (SDVO_CMD_GET_BRIGHTNESS)
>> [ 2.558797] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
>> [ 2.558804] [drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
>> [ 2.558809] [drm:intel_sdvo_debug_write], SDVOC: W: 7B (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
>> [ 2.566432] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
>> [ 2.566438] [drm:intel_sdvo_debug_write], SDVOC: W: 50 (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
>> [ 2.571783] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
>> [ 2.571789] [drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
>> [ 2.571795] [drm:intel_sdvo_debug_write], SDVOC: W: 74 (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
>> [ 2.579413] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
>> [ 2.579418] [drm:intel_sdvo_debug_write], SDVOC: W: 75 (SDVO_CMD_GET_TV_CHROMA_FILTER)
>> [ 2.584769] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
>> [ 2.584775] [drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
>> [ 2.584781] [drm:intel_sdvo_debug_write], SDVOC: W: 77 (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
>> [ 2.592397] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 00 00
>> [ 2.592402] [drm:intel_sdvo_debug_write], SDVOC: W: 78 (SDVO_CMD_GET_TV_LUMA_FILTER)
>> [ 2.597751] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>> [ 2.597757] [drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 0, current 0
>> [ 2.597763] [drm:intel_sdvo_debug_write], SDVOC: W: 70 (SDVO_CMD_GET_DOT_CRAWL)
>> [ 2.603112] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
>> [ 2.603118] [drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
>> [ 2.603121] [drm:intel_sdvo_tv_init], initialising TV type 4
>> [ 2.603235] ------------[ cut here ]------------
>> [ 2.603371] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x68/0x7a()
>> [ 2.603605] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/i2c-7/i2c-7'
>> [ 2.603841] Modules linked in:
>> [ 2.603992] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-main-01064-gd978ef1 #131
>> [ 2.604232] Hardware name: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
>> [ 2.604367] 00000000 f6079c64 f6079c3c c055593e f6079c54 c012a6a9 c022bc73 f6366000
>> [ 2.604781] f6366000 f6367200 f6079c6c c012a6eb 00000009 f6079c64 c06f0720 f6079c80
>> [ 2.605194] f6079c90 c022bc73 c06f06d0 000001e6 c06f0720 f6366000 f6367200 f6371c00
>> [ 2.605606] Call Trace:
>> [ 2.605736] [<c055593e>] dump_stack+0x16/0x18
>> [ 2.605871] [<c012a6a9>] warn_slowpath_common+0x5f/0x76
>> [ 2.606005] [<c022bc73>] ? sysfs_warn_dup+0x68/0x7a
>> [ 2.606139] [<c012a6eb>] warn_slowpath_fmt+0x2b/0x2f
>> [ 2.606273] [<c022bc73>] sysfs_warn_dup+0x68/0x7a
>> [ 2.606407] [<c022bcaa>] sysfs_add_one+0x25/0x2c
>> [ 2.606541] [<c022c567>] sysfs_do_create_link_sd.isra.2+0xc4/0x136
>> [ 2.606678] [<c022c5fd>] sysfs_create_link+0x24/0x2e
>> [ 2.606814] [<c0405e55>] intel_sdvo_connector_init+0x82/0xa2
>> [ 2.606950] [<c0407ad4>] intel_sdvo_tv_init+0x81/0x1cf
>> [ 2.607086] [<c0408a7b>] intel_sdvo_init+0x2ef/0x658
>> [ 2.607221] [<c039e331>] ? drm_ut_debug_printk+0x41/0x55
>> [ 2.607358] [<c03ed664>] intel_modeset_init+0xabd/0xdae
>> [ 2.607494] [<c055e27a>] ? preempt_count_sub+0xa8/0xb5
>> [ 2.607630] [<c055ae44>] ? _raw_spin_unlock_irqrestore+0x44/0x56
>> [ 2.607768] [<c03cfec6>] ? i915_irq_postinstall+0xee/0xf8
>> [ 2.607903] [<c039c688>] ? drm_irq_install+0x155/0x1b5
>> [ 2.608046] [<c03d0fbf>] ? i965_irq_handler+0x480/0x480
>> [ 2.608181] [<c040c7b4>] i915_driver_load+0xa53/0xcc3
>> [ 2.608318] [<c039e8cb>] drm_dev_register+0xb8/0x11b
>> [ 2.608452] [<c03a04d1>] drm_get_pci_dev+0xec/0x18a
>> [ 2.608587] [<c03acd4a>] i915_pci_probe+0x3e/0x47
>> [ 2.608722] [<c030d636>] pci_device_probe+0x5c/0xa4
>> [ 2.608857] [<c0419fce>] driver_probe_device+0x83/0x17a
>> [ 2.608991] [<c041a149>] __driver_attach+0x53/0x6f
>> [ 2.609127] [<c0418b32>] bus_for_each_dev+0x58/0x67
>> [ 2.609261] [<c0419bf2>] driver_attach+0x19/0x1b
>> [ 2.609394] [<c041a0f6>] ? __device_attach+0x31/0x31
>> [ 2.609528] [<c0419912>] bus_add_driver+0xd4/0x18b
>> [ 2.609661] [<c041a609>] driver_register+0x74/0xa9
>> [ 2.609795] [<c030ce6f>] __pci_register_driver+0x4a/0x4d
>> [ 2.609932] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
>> [ 2.610168] [<c03a05c5>] drm_pci_init+0x56/0xc9
>> [ 2.610302] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
>> [ 2.610538] [<c082321d>] i915_init+0x62/0x64
>> [ 2.610670] [<c01003e7>] do_one_initcall+0x7c/0x105
>> [ 2.610805] [<c07f9400>] ? do_early_param+0x3d/0x73
>> [ 2.610940] [<c0140cc6>] ? parse_args+0x16c/0x203
>> [ 2.611074] [<c07f9a4f>] kernel_init_freeable+0xdb/0x158
>> [ 2.611210] [<c054f9fe>] kernel_init+0xd/0xdf
>> [ 2.611344] [<c0560937>] ret_from_kernel_thread+0x1b/0x28
>> [ 2.611479] [<c054f9f1>] ? rest_init+0xa5/0xa5
>> [ 2.611666] ---[ end trace cd346fb3f5b5c52d ]---
>> [ 2.613964] [drm:intel_sdvo_init], SDVO output failed to setup on SDVOC
>> [ 2.614565] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
>> [ 2.614731] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>> [ 2.614737] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: disabled
>> [ 2.614743] [drm:intel_modeset_readout_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe A
>> [ 2.614750] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.620297] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.620304] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 2.632814] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
>> [ 2.632820] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 2.645339] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
>> [ 2.645346] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 2.649684] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
>> [ 2.649688] [drm:intel_modeset_readout_hw_state], [ENCODER:7:TMDS-7] hw state readout: enabled, pipe A
>> [ 2.649694] [drm:intel_modeset_readout_hw_state], [ENCODER:10:TV-10] hw state readout: disabled, pipe A
>> [ 2.649700] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
>> [ 2.649706] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.655201] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.655205] [drm:intel_modeset_readout_hw_state], [CONNECTOR:8:DVI-D-1] hw state readout: enabled
>> [ 2.655210] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:SVIDEO-1] hw state readout: disabled
>> [ 2.655213] [drm:intel_modeset_setup_hw_state], [CRTC:3] found active mode:
>> [ 2.655219] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
>> [ 2.655227] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>> [ 2.655230] [drm:intel_dump_pipe_config], cpu_transcoder: A
>> [ 2.655234] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>> [ 2.655239] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.655243] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.655247] [drm:intel_dump_pipe_config], requested mode:
>> [ 2.655252] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>> [ 2.655255] [drm:intel_dump_pipe_config], adjusted mode:
>> [ 2.655260] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
>> [ 2.655266] [drm:intel_dump_crtc_timings], crtc timings: 28320 720 765 873 900 400 412 414 449, type: 0x0 flags: 0x6
>> [ 2.655269] [drm:intel_dump_pipe_config], port clock: 113280
>> [ 2.655273] [drm:intel_dump_pipe_config], pipe src size: 720x400
>> [ 2.655277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>> [ 2.655281] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>> [ 2.655284] [drm:intel_dump_pipe_config], ips: 0
>> [ 2.655288] [drm:intel_dump_pipe_config], double wide: 0
>> [ 2.655293] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
>> [ 2.655297] [drm:intel_dump_pipe_config], cpu_transcoder: B
>> [ 2.655300] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>> [ 2.655305] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.655309] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.655313] [drm:intel_dump_pipe_config], requested mode:
>> [ 2.655318] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>> [ 2.655321] [drm:intel_dump_pipe_config], adjusted mode:
>> [ 2.655326] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>> [ 2.655331] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>> [ 2.655335] [drm:intel_dump_pipe_config], port clock: 0
>> [ 2.655338] [drm:intel_dump_pipe_config], pipe src size: 0x0
>> [ 2.655342] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>> [ 2.655346] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>> [ 2.655349] [drm:intel_dump_pipe_config], ips: 0
>> [ 2.655353] [drm:intel_dump_pipe_config], double wide: 0
>> [ 2.655361] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.660867] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.660871] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
>> [ 2.660877] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.666381] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.666386] [drm:check_encoder_state], [ENCODER:6:DAC-6]
>> [ 2.666392] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
>> [ 2.666398] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.671900] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.671904] [drm:check_encoder_state], [ENCODER:10:TV-10]
>> [ 2.671909] [drm:check_crtc_state], [CRTC:3]
>> [ 2.671925] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.677425] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.677431] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 2.689935] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
>> [ 2.689941] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 2.702442] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
>> [ 2.702449] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 2.706782] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
>> [ 2.706787] [drm:check_crtc_state], [CRTC:4]
>> [ 2.706799] [drm:i9xx_get_plane_config], pipe/plane 0/1 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
>> [ 2.706804] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
>> [ 2.706879] [drm:i915_pages_create_for_stolen], offset=0x0, size=1282048
>> [ 2.706966] [drm:intel_alloc_plane_obj], plane fb obj f6373e40
>> [ 2.706972] [drm:i915_gem_setup_global_gtt], reserving preallocated space: 0 + 139000
>> [ 2.706976] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [139000, ffff000]
>> [ 2.709450] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
>> [ 2.709471] [drm:i915_pages_create_for_stolen], offset=0x139000, size=131072
>> [ 2.709884] [drm] initialized overlay support
>> [ 2.710017] [drm:intel_fbdev_init_bios], found possible fb from plane A
>> [ 2.710020] [drm:intel_fbdev_init_bios], pipe B not active or no fb, skipping
>> [ 2.710024] [drm:intel_fbdev_init_bios], checking plane A for BIOS fb
>> [ 2.710028] [drm:intel_fbdev_init_bios], pipe A area: 288000
>> [ 2.710031] [drm:intel_fbdev_init_bios], total size 1152000 (bpp 4)
>> [ 2.710035] [drm:intel_fbdev_init_bios], fb big enough for plane A (1282048 >= 1152000)
>> [ 2.710039] [drm:intel_fbdev_init_bios], pipe B not active, skipping
>> [ 2.710044] [drm:intel_fbdev_init_bios], using BIOS fb for initial console
>> [ 2.710054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
>> [ 2.710059] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
>> [ 2.712024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>> [ 2.712028] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 2.712032] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>> [ 2.712036] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>> [ 2.712368] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 2.712372] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>> [ 2.712375] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>> [ 2.712380] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
>> [ 2.712402] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
>> [ 2.712499] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>> [ 2.712505] [drm:connected_sink_compute_bpp], [CONNECTOR:5:VGA-1] checking for sink bpp constrains
>> [ 2.712533] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>> [ 2.712537] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>> [ 2.712541] [drm:intel_dump_pipe_config], cpu_transcoder: B
>> [ 2.712544] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>> [ 2.712549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.712553] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.712557] [drm:intel_dump_pipe_config], requested mode:
>> [ 2.712562] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
>> [ 2.712566] [drm:intel_dump_pipe_config], adjusted mode:
>> [ 2.712571] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
>> [ 2.712577] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
>> [ 2.712580] [drm:intel_dump_pipe_config], port clock: 31500
>> [ 2.712584] [drm:intel_dump_pipe_config], pipe src size: 640x480
>> [ 2.712588] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>> [ 2.712592] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>> [ 2.712595] [drm:intel_dump_pipe_config], ips: 0
>> [ 2.712599] [drm:intel_dump_pipe_config], double wide: 0
>> [ 2.714954] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 2560
>> [ 2.714960] [drm:intel_update_fbc], disabled per chip default
>> [ 2.714967] [drm:intel_crtc_mode_set], [ENCODER:6:DAC-6] set [MODE:0:640x480]
>> [ 2.715720] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>> [ 2.715725] [drm:intel_calculate_wm], FIFO entries required for mode: 10
>> [ 2.715728] [drm:intel_calculate_wm], FIFO watermark level: 16
>> [ 2.715733] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>> [ 2.715736] [drm:intel_calculate_wm], FIFO entries required for mode: 9
>> [ 2.715739] [drm:intel_calculate_wm], FIFO watermark level: 20
>> [ 2.715743] [drm:i9xx_update_wm], FIFO watermarks - A: 16, B: 20
>> [ 2.715748] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 16, B: 20, C: 2, SR 1
>> [ 2.715752] [drm:i9xx_update_wm], memory self refresh disabled
>> [ 2.736020] [drm:intel_update_fbc], more than one pipe active, disabling compression
>> [ 2.736030] [drm:intel_connector_check_state], [CONNECTOR:5:VGA-1]
>> [ 2.736037] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.741571] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.741575] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
>> [ 2.741582] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.747093] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.747098] [drm:check_encoder_state], [ENCODER:6:DAC-6]
>> [ 2.747104] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
>> [ 2.747110] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.752626] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.752630] [drm:check_encoder_state], [ENCODER:10:TV-10]
>> [ 2.752635] [drm:check_crtc_state], [CRTC:3]
>> [ 2.752652] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.758158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.758164] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 2.770686] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
>> [ 2.770692] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 2.783214] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
>> [ 2.783220] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 2.787557] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
>> [ 2.787561] [drm:check_crtc_state], [CRTC:4]
>> [ 2.804021] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>> [ 2.804025] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 2.804029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>> [ 2.804033] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>> [ 2.804374] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 2.804378] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>> [ 2.804382] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>> [ 2.804385] [drm:intel_crt_load_detect], starting load-detect on CRT
>> [ 2.812019] [drm:intel_release_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
>> [ 2.812024] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>> [ 2.844985] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>> [ 2.844990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>> [ 2.844993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
>> [ 2.844997] [drm:intel_calculate_wm], FIFO watermark level: 20
>> [ 2.845000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
>> [ 2.845004] [drm:i9xx_update_wm], self-refresh entries: 45
>> [ 2.845009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
>> [ 2.845014] [drm:i9xx_update_wm], memory self refresh enabled
>> [ 2.845017] [drm:intel_update_fbc], disabled per chip default
>> [ 2.845031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.850537] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.850541] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
>> [ 2.850548] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.856056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.856061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
>> [ 2.856066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
>> [ 2.856073] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.861589] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.861593] [drm:check_encoder_state], [ENCODER:10:TV-10]
>> [ 2.861597] [drm:check_crtc_state], [CRTC:3]
>> [ 2.861613] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 2.867118] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.867124] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 2.879645] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
>> [ 2.879650] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 2.892173] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
>> [ 2.892179] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 2.896517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
>> [ 2.896521] [drm:check_crtc_state], [CRTC:4]
>> [ 2.896657] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
>> [ 2.896662] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1]
>> [ 2.896666] [drm:intel_sdvo_detect], [CONNECTOR:8:DVI-D-1]
>> [ 2.896672] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>> [ 2.902454] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 2.902458] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
>> [ 2.902465] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>> [ 2.906363] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>> [ 2.943050] [drm:intel_sdvo_get_ddc_modes], [CONNECTOR:8:DVI-D-1]
>> [ 2.943057] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>> [ 2.946942] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>> [ 2.983605] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
>> [ 2.983626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1] probed modes :
>> [ 2.983633] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>> [ 2.983639] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>> [ 2.983645] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>> [ 2.983651] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>> [ 2.983657] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>> [ 2.983661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1]
>> [ 2.983665] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=1
>> [ 2.983670] [drm:intel_get_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
>> [ 2.983674] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
>> [ 2.983693] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>> [ 2.983699] [drm:connected_sink_compute_bpp], [CONNECTOR:9:SVIDEO-1] checking for sink bpp constrains
>> [ 2.983703] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
>> [ 2.983709] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>> [ 2.983713] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
>> [ 2.983716] [drm:intel_dump_pipe_config], cpu_transcoder: B
>> [ 2.983720] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>> [ 2.983724] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.983729] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 2.983732] [drm:intel_dump_pipe_config], requested mode:
>> [ 2.983738] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>> [ 2.983741] [drm:intel_dump_pipe_config], adjusted mode:
>> [ 2.983747] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>> [ 2.983752] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
>> [ 2.983756] [drm:intel_dump_pipe_config], port clock: 108000
>> [ 2.983760] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
>> [ 2.983764] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>> [ 2.983768] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>> [ 2.983771] [drm:intel_dump_pipe_config], ips: 0
>> [ 2.983774] [drm:intel_dump_pipe_config], double wide: 0
>> [ 2.993290] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 5120
>> [ 2.993305] [drm:intel_crtc_mode_set], [ENCODER:10:TV-10] set [MODE:0:NTSC 480i]
>> [ 2.999122] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>> [ 2.999126] [drm:intel_calculate_wm], FIFO entries required for mode: 34
>> [ 2.999130] [drm:intel_calculate_wm], FIFO watermark level: -8
>> [ 2.999134] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>> [ 2.999138] [drm:intel_calculate_wm], FIFO entries required for mode: 9
>> [ 2.999141] [drm:intel_calculate_wm], FIFO watermark level: 20
>> [ 2.999145] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 20
>> [ 2.999150] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 20, C: 2, SR 1
>> [ 2.999154] [drm:i9xx_update_wm], memory self refresh disabled
>> [ 3.020020] [drm:intel_update_fbc], more than one pipe active, disabling compression
>> [ 3.020035] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.025549] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.025554] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
>> [ 3.025560] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.031068] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.031073] [drm:intel_connector_check_state], [CONNECTOR:9:SVIDEO-1]
>> [ 3.031078] [drm:check_encoder_state], [ENCODER:6:DAC-6]
>> [ 3.031084] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
>> [ 3.031090] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.036595] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.036599] [drm:check_encoder_state], [ENCODER:10:TV-10]
>> [ 3.036603] [drm:check_crtc_state], [CRTC:3]
>> [ 3.036621] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.042131] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.042137] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 3.054659] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
>> [ 3.054665] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 3.067186] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
>> [ 3.067192] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 3.071529] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
>> [ 3.071535] [drm:check_crtc_state], [CRTC:4]
>> [ 3.100115] tsc: Refined TSC clocksource calibration: 1862.713 MHz
>> [ 3.108021] [drm:intel_tv_detect_type], TV detected: 400c0c07, 7f0000aa
>> [ 3.108025] [drm:intel_tv_detect_type], Unrecognised TV connection
>> [ 3.140020] [drm:intel_release_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
>> [ 3.140026] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>> [ 3.184984] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>> [ 3.184989] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>> [ 3.184993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
>> [ 3.184996] [drm:intel_calculate_wm], FIFO watermark level: 20
>> [ 3.185000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
>> [ 3.185004] [drm:i9xx_update_wm], self-refresh entries: 45
>> [ 3.185009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
>> [ 3.185013] [drm:i9xx_update_wm], memory self refresh enabled
>> [ 3.185017] [drm:intel_update_fbc], disabled per chip default
>> [ 3.185031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.190539] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.190544] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
>> [ 3.190550] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.196056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.196061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
>> [ 3.196066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
>> [ 3.196072] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.201576] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.201580] [drm:check_encoder_state], [ENCODER:10:TV-10]
>> [ 3.201584] [drm:check_crtc_state], [CRTC:3]
>> [ 3.201600] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.207107] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.207113] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 3.219632] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
>> [ 3.219638] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 3.232158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
>> [ 3.232165] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 3.236510] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
>> [ 3.236515] [drm:check_crtc_state], [CRTC:4]
>> [ 3.236626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1] disconnected
>> [ 3.236631] [drm:drm_setup_crtcs],
>> [ 3.236635] [drm:drm_enable_connectors], connector 5 enabled? no
>> [ 3.236639] [drm:drm_enable_connectors], connector 8 enabled? yes
>> [ 3.236643] [drm:drm_enable_connectors], connector 9 enabled? no
>> [ 3.236647] [drm:intel_fb_initial_config], connector 5 not enabled, skipping
>> [ 3.236651] [drm:intel_fb_initial_config], looking for cmdline mode on connector 8
>> [ 3.236655] [drm:intel_fb_initial_config], looking for preferred mode on connector 8
>> [ 3.236659] [drm:intel_fb_initial_config], connector DVI-D-1 on crtc 3: 1280x1024
>> [ 3.236663] [drm:intel_fb_initial_config], connector 9 not enabled, skipping
>> [ 3.236667] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
>> [ 3.236676] [drm:intelfb_create], re-using BIOS fb
>> [ 3.236892] [drm:intelfb_create], allocated 720x400 fb: 0x00000000, bo f6373e40
>> [ 3.237675] fbcon: inteldrmfb (fb0) is primary device
>> [ 3.241496] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
>> [ 3.241501] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>> [ 3.241506] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
>> [ 3.241510] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>> [ 3.241512] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>> [ 3.241515] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
>> [ 3.241519] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>> [ 3.241523] [drm:connected_sink_compute_bpp], [CONNECTOR:8:DVI-D-1] checking for sink bpp constrains
>> [ 3.241526] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO
>> [ 3.241540] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>> [ 3.241542] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>> [ 3.241544] [drm:intel_dump_pipe_config], cpu_transcoder: A
>> [ 3.241546] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>> [ 3.241549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 3.241551] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>> [ 3.241553] [drm:intel_dump_pipe_config], requested mode:
>> [ 3.241557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>> [ 3.241559] [drm:intel_dump_pipe_config], adjusted mode:
>> [ 3.241562] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>> [ 3.241566] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>> [ 3.241568] [drm:intel_dump_pipe_config], port clock: 108000
>> [ 3.241570] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
>> [ 3.241572] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>> [ 3.241575] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>> [ 3.241576] [drm:intel_dump_pipe_config], ips: 0
>> [ 3.241578] [drm:intel_dump_pipe_config], double wide: 0
>> [ 3.241583] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>> [ 3.246688] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.260987] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>> [ 3.260990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>> [ 3.260992] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
>> [ 3.260995] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
>> [ 3.260998] [drm:i9xx_update_wm], memory self refresh disabled
>> [ 3.260999] [drm:intel_update_fbc], no output, disabling
>> [ 3.261240] [drm:i9xx_update_plane], Writing base 00000000 00000000 0 0 3200
>> [ 3.261248] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024]
>> [ 3.261253] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
>> [ 3.268071] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.268075] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
>> [ 3.273147] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.273153] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
>> [ 3.283457] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.283462] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
>> [ 3.293770] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.293775] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
>> [ 3.297977] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.297982] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE)
>> [ 3.302181] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
>> [ 3.302187] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
>> [ 3.312503] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.312508] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
>> [ 3.322809] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.322814] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
>> [ 3.327010] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.327784] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
>> [ 3.327787] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
>> [ 3.327789] [drm:intel_calculate_wm], FIFO entries required for mode: 34
>> [ 3.327791] [drm:intel_calculate_wm], FIFO watermark level: -5
>> [ 3.327793] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
>> [ 3.327795] [drm:i9xx_update_wm], self-refresh entries: 80
>> [ 3.327798] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 15
>> [ 3.327802] [drm:i9xx_update_wm], memory self refresh enabled
>> [ 3.348019] [drm:intel_update_fbc], disabled per chip default
>> [ 3.380022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
>> [ 3.384583] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
>> [ 3.384587] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>> [ 3.389658] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
>> [ 3.389666] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.395449] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.395451] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
>> [ 3.395456] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.401241] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.401245] [drm:check_encoder_state], [ENCODER:6:DAC-6]
>> [ 3.401249] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
>> [ 3.401254] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.407033] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.407036] [drm:check_encoder_state], [ENCODER:10:TV-10]
>> [ 3.407038] [drm:check_crtc_state], [CRTC:3]
>> [ 3.407056] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
>> [ 3.412852] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
>> [ 3.412857] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
>> [ 3.426023] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 2A 00 98 51 00 2A 40
>> [ 3.426028] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
>> [ 3.439507] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 70 13 00 1E 00 00 00
>> [ 3.439512] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
>> [ 3.444085] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
>> [ 3.444087] [drm:check_crtc_state], [CRTC:4]
>> [ 3.444093] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>> [ 3.444098] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
>> [ 3.444101] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
>> [ 3.444129] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
>> [ 3.444134] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>> [ 3.444136] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
>> [ 3.446774] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
>> [ 3.446779] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>> [ 3.446782] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
>> [ 3.449753] Console: switching to colour frame buffer device 90x25
>> [ 3.449760] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
>> [ 3.449765] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>> [ 3.449768] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
>> [ 3.455199] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>> [ 3.456384] i915 0000:00:02.0: registered panic notifier
>> [ 3.457613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>> [ 3.459287] parport_pc 00:07: reported by Plug and Play ACPI
>> [ 3.460641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>> [ 3.560558] lp0: using parport0 (interrupt-driven).
>> [ 3.564759] loop: module loaded
>> [ 3.566136] ACPI Warning: 0x00004028-0x0000402f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
>> [ 3.568770] ACPI: This conflict may cause random problems and system instability
>> [ 3.570118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>> [ 3.572842] ACPI Warning: 0x000040b0-0x000040bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
>> [ 3.575761] ACPI: This conflict may cause random problems and system instability
>> [ 3.577297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>> [ 3.580449] ACPI Warning: 0x00004080-0x000040af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
>> [ 3.583752] ACPI: This conflict may cause random problems and system instability
>> [ 3.585482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>> [ 3.589035] Uniform Multi-Platform E-IDE driver
>> [ 3.590849] ide-gd driver 1.18
>> [ 3.592566] ide-cd driver 5.00
>> [ 3.594437] sata_sil24 0000:04:00.0: version 1.1
>> [ 3.595856] scsi0 : sata_sil24
>> [ 3.597881] scsi1 : sata_sil24
>> [ 3.599576] ata1: SATA max UDMA/100 host m128@0xd5184000 port 0xd5180000 irq 19
>> [ 3.601314] ata2: SATA max UDMA/100 host m128@0xd5184000 port 0xd5182000 irq 19
>> [ 3.603328] ata_piix 0000:00:1f.2: version 2.13
>> [ 3.603623] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>> [ 3.606198] scsi2 : ata_piix
>> [ 3.607871] scsi3 : ata_piix
>> [ 3.609448] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>> [ 3.610913] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>> [ 3.612450] sky2: driver version 1.30
>> [ 3.614005] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
>> [ 3.615426] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
>> [ 3.615990] sky2 0000:02:00.0 eth0: addr 00:01:80:62:25:4b
>> [ 3.617863] sky2 0000:03:00.0: Yukon-2 EC chip revision 1
>> [ 3.619183] sky2 0000:03:00.0: irq 45 for MSI/MSI-X
>> [ 3.619513] sky2 0000:03:00.0 eth1: addr 00:01:80:62:25:4c
>> [ 3.620830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 3.622055] ehci-pci: EHCI PCI platform driver
>> [ 3.623683] ehci-pci 0000:00:1d.7: EHCI Host Controller
>> [ 3.625075] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>> [ 3.630227] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
>> [ 3.630292] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd5444000
>> [ 3.640021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> [ 3.641536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 3.642578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 3.643620] usb usb1: Product: EHCI Host Controller
>> [ 3.644663] usb usb1: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 ehci_hcd
>> [ 3.645769] usb usb1: SerialNumber: 0000:00:1d.7
>> [ 3.647888] hub 1-0:1.0: USB hub found
>> [ 3.649147] hub 1-0:1.0: 8 ports detected
>> [ 3.651481] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 3.653001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [ 3.654178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>> [ 3.655367] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
>> [ 3.656724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 3.657917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 3.659136] usb usb2: Product: UHCI Host Controller
>> [ 3.660335] usb usb2: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
>> [ 3.661564] usb usb2: SerialNumber: 0000:00:1d.0
>> [ 3.663098] hub 2-0:1.0: USB hub found
>> [ 3.664378] hub 2-0:1.0: 2 ports detected
>> [ 3.666229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [ 3.667440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>> [ 3.668729] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
>> [ 3.670060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 3.671288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 3.672540] usb usb3: Product: UHCI Host Controller
>> [ 3.673782] usb usb3: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
>> [ 3.675044] usb usb3: SerialNumber: 0000:00:1d.1
>> [ 3.676608] hub 3-0:1.0: USB hub found
>> [ 3.677842] hub 3-0:1.0: 2 ports detected
>> [ 3.679658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [ 3.680864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>> [ 3.682124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
>> [ 3.683491] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 3.684736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 3.685978] usb usb4: Product: UHCI Host Controller
>> [ 3.687201] usb usb4: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
>> [ 3.688460] usb usb4: SerialNumber: 0000:00:1d.2
>> [ 3.689990] hub 4-0:1.0: USB hub found
>> [ 3.691218] hub 4-0:1.0: 2 ports detected
>> [ 3.693001] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> [ 3.694192] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>> [ 3.695424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
>> [ 3.696739] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 3.697965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 3.699207] usb usb5: Product: UHCI Host Controller
>> [ 3.700441] usb usb5: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
>> [ 3.701705] usb usb5: SerialNumber: 0000:00:1d.3
>> [ 3.703233] hub 5-0:1.0: USB hub found
>> [ 3.704490] hub 5-0:1.0: 2 ports detected
>> [ 3.706034] usbcore: registered new interface driver usblp
>> [ 3.707276] usbcore: registered new interface driver usb-storage
>> [ 3.708533] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>> [ 3.709709] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>> [ 3.713047] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 3.714994] mousedev: PS/2 mouse device common for all mice
>> [ 3.717248] input: PC Speaker as /devices/platform/pcspkr/input/input3
>> [ 3.718730] rtc_cmos 00:02: RTC can wake from S4
>> [ 3.720549] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>> [ 3.721854] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
>> [ 3.723487] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>> [ 3.724891] w83627hf: w83627hf: Found W83627THF chip at 0x290
>> [ 3.726201] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \SEN1 1 (20131115/utaddress-251)
>> [ 3.729640] ACPI: This conflict may cause random problems and system instability
>> [ 3.731040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>> [ 3.734295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>> [ 3.735750] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x4060)
>> [ 3.737604] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> [ 3.739060] device-mapper: uevent: version 1.0.3
>> [ 3.740715] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
>> [ 3.743911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>> [ 3.747832] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 3.750358] usbcore: registered new interface driver usbhid
>> [ 3.751951] usbhid: USB HID core driver
>> [ 3.753692] TCP: cubic registered
>> [ 3.755210] Initializing XFRM netlink socket
>> [ 3.757156] Using IPI Shortcut mode
>> [ 3.758914] registered taskstats version 1
>> [ 3.760845] AppArmor: AppArmor sha1 policy hashing enabled
>> [ 3.763285] rtc_cmos 00:02: setting system clock to 2014-04-22 13:43:01 UTC (1398174181)
>> [ 3.767393] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>> [ 3.769169] PM: Checking hibernation image partition /dev/sda3
>> [ 3.776285] tsc: Marking TSC unstable due to cpufreq changes
>> [ 3.780763] ata4.00: ATAPI: AOpen DVRW2412PRO, 1.64, max UDMA/33
>> [ 3.800255] ata4.00: configured for UDMA/33
>> [ 3.804440] ata3.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
>> [ 3.807721] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [ 3.811214] ata3.01: ATA-7: HDT722525DLA380, V44OA91A, max UDMA/133
>> [ 3.814472] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [ 3.832368] ata3.00: configured for UDMA/133
>> [ 3.849099] ata3.01: configured for UDMA/133
>> [ 3.960127] usb 1-2: new high-speed USB device number 2 using ehci-pci
>> [ 4.103316] usb 1-2: New USB device found, idVendor=04b8, idProduct=011b
>> [ 4.106371] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [ 4.109373] usb 1-2: Product: EPSON Scanner
>> [ 4.111499] usb 1-2: Manufacturer: EPSON
>> [ 4.224106] usb 1-3: new high-speed USB device number 3 using ehci-pci
>> [ 4.356693] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
>> [ 4.359538] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>> [ 4.362453] usb 1-3: Product: USB 2.0 Hub
>> [ 4.366019] hub 1-3:1.0: USB hub found
>> [ 4.369046] hub 1-3:1.0: 4 ports detected
>> [ 4.868063] usb 5-2: new full-speed USB device number 2 using uhci_hcd
>> [ 5.055696] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
>> [ 5.058754] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [ 5.061636] usb 5-2: Product: USB Receiver
>> [ 5.064371] usb 5-2: Manufacturer: Logitech
>> [ 5.077307] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
>> [ 5.082613] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
>> [ 5.092226] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
>> [ 5.096306] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
>> [ 5.106935] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2
>> [ 5.308198] usb 1-3.4: new full-speed USB device number 5 using ehci-pci
>> [ 5.405819] usb 1-3.4: New USB device found, idVendor=03f0, idProduct=1d17
>> [ 5.409341] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [ 5.412910] usb 1-3.4: Product: hp LaserJet 1320 series
>> [ 5.416462] usb 1-3.4: Manufacturer: Hewlett-Packard
>> [ 5.417994] usb 1-3.4: SerialNumber: 00CNHW646GZH
>> [ 5.421067] usblp 1-3.4:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
>> [ 5.800070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> [ 5.805665] ata1.00: ATA-8: KINGSTON SKC100S3120G, 501ABBF0, max UDMA/133
>> [ 5.809390] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> [ 5.815601] ata1.00: configured for UDMA/100
>> [ 5.834084] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC100S 501A PQ: 0 ANSI: 5
>> [ 5.843662] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>> [ 5.848453] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 5.850657] sd 0:0:0:0: [sda] Write Protect is off
>> [ 5.852791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 5.852845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 5.857891] sda: sda1 sda2 sda3
>> [ 5.860857] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 7.932067] ata2: SATA link down (SStatus 0 SControl 0)
>> [ 7.948446] scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72201 JP4O PQ: 0 ANSI: 5
>> [ 7.955565] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>> [ 7.959313] sd 2:0:0:0: Attached scsi generic sg1 type 0
>> [ 7.962840] sd 2:0:0:0: [sdb] Write Protect is off
>> [ 7.966273] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>> [ 7.966355] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 7.969460] scsi 2:0:1:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
>> [ 7.972841] sd 2:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>> [ 7.974488] sd 2:0:1:0: [sdc] Write Protect is off
>> [ 7.975996] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>> [ 7.976292] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 7.979883] sd 2:0:1:0: Attached scsi generic sg2 type 0
>> [ 7.982786] sdb: sdb1 sdb2 sdb3 sdb4
>> [ 7.984492] scsi 3:0:0:0: CD-ROM AOPEN DVRW2412PRO 1.64 PQ: 0 ANSI: 5
>> [ 7.988948] sd 2:0:0:0: [sdb] Attached SCSI disk
>> [ 7.991247] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>> [ 7.992779] cdrom: Uniform CD-ROM driver Revision: 3.20
>> [ 7.994996] sr 3:0:0:0: Attached scsi CD-ROM sr0
>> [ 7.995175] sr 3:0:0:0: Attached scsi generic sg3 type 5
>> [ 8.058214] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
>> [ 8.064585] sd 2:0:1:0: [sdc] Attached SCSI disk
>> [ 8.067998] PM: Hibernation image partition 8:3 present
>> [ 8.068035] PM: Looking for hibernation image.
>> [ 8.071701] PM: Image not found (code -22)
>> [ 8.071711] PM: Hibernation image not present or could not be loaded.
>> [ 8.072512] Freeing unused kernel memory: 500K (c07f9000 - c0876000)
>> [ 8.074558] Write protecting the kernel text: 4488k
>> [ 8.076665] Write protecting the kernel read-only data: 2256k
>> [ 8.078335] NX-protecting the kernel data: 4728k
>> [ 8.196506] systemd-udevd[90]: starting version 208
>> [ 8.817893] random: nonblocking pool is initialized
>> [ 9.587815] platform microcode: Direct firmware load failed with error -2
>> [ 9.591670] platform microcode: Falling back to user helper
>> [ 13.472325] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
>> [ 13.476038] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>> [ 13.476045] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 13.476049] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>> [ 13.476054] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>> [ 13.476395] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 13.476399] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>> [ 13.476403] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>> [ 13.476478] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
>> [ 14.778136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
>> [ 14.826261] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
>> [ 15.029583] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>> [ 15.118801] NET: Registered protocol family 10
>> [ 15.124315] systemd[1]: Inserted module 'ipv6'
>> [ 15.126644] systemd[1]: Set hostname to <golem>.
>> [ 15.183033] LVM: Logical Volume autoactivation enabled.
>> [ 15.185303] LVM: Activation generator successfully completed.
>> [ 15.311540] systemd[1]: Starting Remote File Systems (Pre).
>> [ 15.316221] systemd[1]: Reached target Remote File Systems (Pre).
>> [ 15.317953] systemd[1]: Starting Remote File Systems.
>> [ 15.321672] systemd[1]: Reached target Remote File Systems.
>> [ 15.323419] systemd[1]: Starting Syslog Socket.
>> [ 15.327122] systemd[1]: Listening on Syslog Socket.
>> [ 15.328820] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
>> [ 15.331851] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>> [ 15.333287] systemd[1]: Starting Delayed Shutdown Socket.
>> [ 15.336210] systemd[1]: Listening on Delayed Shutdown Socket.
>> [ 15.337533] systemd[1]: Starting LVM2 metadata daemon socket.
>> [ 15.340369] systemd[1]: Listening on LVM2 metadata daemon socket.
>> [ 15.341702] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
>> [ 15.343342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>> [ 15.344736] systemd[1]: Starting Paths.
>> [ 15.347608] systemd[1]: Reached target Paths.
>> [ 15.349096] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
>> [ 15.354344] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>> [ 15.357277] systemd[1]: Starting Encrypted Volumes.
>> [ 15.360435] systemd[1]: Reached target Encrypted Volumes.
>> [ 15.361957] systemd[1]: Starting Journal Socket.
>> [ 15.365335] systemd[1]: Listening on Journal Socket.
>> [ 15.366865] systemd[1]: Mounting POSIX Message Queue File System...
>> [ 15.375572] systemd[1]: Starting Load Kernel Modules...
>> [ 15.382417] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>> [ 15.402740] systemd[1]: Started Set Up Additional Binary Formats.
>> [ 15.405020] systemd[1]: Starting Setup Virtual Console...
>> [ 15.413643] systemd[1]: Starting Create dynamic rule for /dev/root link...
>> [ 15.424935] systemd[1]: Starting LSB: Set default boot entry if called...
>> [ 15.432288] systemd[1]: Starting Journal Service...
>> [ 15.463472] systemd[1]: Started Journal Service.
>> [ 15.498137] systemd-journald[202]: Vacuuming done, freed 0 bytes
>> [ 15.569620] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
>> [ 15.569627] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>> [ 15.569631] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
>> [ 15.621781] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
>> [ 15.909733] systemd-udevd[241]: starting version 208
>> [ 16.379683] Linux video capture interface: v2.00
>> [ 16.521180] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
>> [ 16.542699] WARNING! power/level is deprecated; use power/control instead
>> [ 16.733638] Adding 7119316k swap on /dev/sda3. Priority:-1 extents:1 across:7119316k SS
>> [ 17.074286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>> [ 17.139216] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=3 (0x14/0x17/0x16/0x0/0x0) type:line
>> [ 17.139224] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>> [ 17.139229] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
>> [ 17.139233] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
>> [ 17.139237] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0
>> [ 17.139240] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
>> [ 17.139244] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
>> [ 17.139248] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x1b
>> [ 17.139252] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
>> [ 17.139257] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
>> [ 17.139261] ALSA sound/pci/hda/patch_realtek.c:572 realtek: Enable default setup for auto mode as fallback
>> [ 17.162783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
>> [ 17.222696] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>> [ 17.236290] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>> [ 17.255391] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>> [ 17.261287] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>> [ 17.274087] tveeprom 8-0050: Hauppauge model 69100, rev B4C3, serial# 7900937
>> [ 17.292122] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>> [ 17.303670] tveeprom 8-0050: MAC address is 00:0d:fe:78:8f:09
>> [ 17.315320] tveeprom 8-0050: tuner model is Conexant CX24118A (idx 123, type 4)
>> [ 17.321311] tveeprom 8-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
>> [ 17.329373] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>> [ 17.335654] tveeprom 8-0050: audio processor is None (idx 0)
>> [ 17.347089] tveeprom 8-0050: decoder processor is CX880 (idx 20)
>> [ 17.357408] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
>> [ 17.367460] cx88[0]: hauppauge eeprom: model=69100
>> [ 17.416091] Registered IR keymap rc-hauppauge
>> [ 17.418847] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0/input13
>> [ 17.431663] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0
>> [ 17.449327] IR RC5(x) protocol handler initialized
>> [ 17.454480] cx88[0]/2: cx2388x 8802 Driver Manager
>> [ 17.457159] cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 17, latency: 32, mmio: 0xd2000000
>> [ 17.461726] lirc_dev: IR Remote Control driver registered, major 250
>> [ 17.466631] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
>> [ 17.472116] IR LIRC bridge handler initialized
>> [ 17.482251] cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 17, latency: 32, mmio: 0xd0000000
>> [ 17.487398] cx88[0]/0: registered device video0 [v4l2]
>> [ 17.497932] cx88[0]/0: registered device vbi0
>> [ 17.509908] cx88/2: cx2388x dvb driver version 0.0.9 loaded
>> [ 17.511501] cx88/2: registering cx8802 driver, type: dvb access: shared
>> [ 17.514289] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
>> [ 17.521114] cx88[0]/2: cx2388x based DVB/ATSC card
>> [ 17.524146] cx8802_alloc_frontends() allocating 1 frontend(s)
>> [ 17.552650] DVB: registering new adapter (cx88[0])
>> [ 17.554415] cx88-mpeg driver manager 0000:05:05.2: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
>> [ 17.767120] REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
>> [ 17.769248] REISERFS (device sdb4): using ordered data mode
>> [ 17.770792] reiserfs: using flush barriers
>> [ 17.782609] REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>> [ 17.787278] REISERFS (device sdb4): checking transaction log (sdb4)
>> [ 17.892494] REISERFS (device sdb4): Using r5 hash to sort names
>> [ 17.917237] usblp0: removed
>> [ 18.063161] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
>> [ 18.112358] systemd-journald[202]: Received request to flush runtime journal from PID 1
>> [ 18.898204] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [ 19.019782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> [ 19.048657] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 21.004540] sky2 0000:02:00.0 eth0: enabling interface
>> [ 21.004816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 21.171576] NET: Registered protocol family 17
>> [ 22.799130] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
>> [ 22.799313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [ 23.488060] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
>> [ 23.492456] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>> [ 23.492470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 23.492479] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>> [ 23.492489] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>> [ 23.492967] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>> [ 23.492978] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>> [ 23.492986] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>> [ 23.493001] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
On Tue, 2014-04-22 at 18:10 +0300, Jani Nikula wrote:
> Knut, thanks for a quick bisect.
>
> Imre, please have a look at the sdvo WARN related to sysfs links in the
> dmesg.
It's probably the same WARN fixed by:
http://patchwork.freedesktop.org/patch/24126/
--Imre
>
> Daniel, you have any ideas about the bios fbdev stuff while Jesse's
> traveling?
>
> BR,
> Jani.
>
>
>
> On Tue, 22 Apr 2014, Knut Petersen <[email protected]> wrote:
> > On 22.04.2014 13:54, Jani Nikula wrote:
> >> On Mon, 21 Apr 2014, Knut Petersen <[email protected]> wrote:
> >>> Booting kernel 3.15-rc2 on an AOpen i915GMm-hfs, I see the framebuffer broken.
> >>> Only about the upper left quarter of the monitor is used for displaying the boot messages,
> >>> these (and the cursor) are replicated at the right of that area.
> >> Is this before or after i915.ko is loaded?
> > No .ko, it's compiled directly into the kernel.
> >
> > First bad commit is d978ef14456a38034f6c0e94a794129501f89200
> > (drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12)
> >
> > Probably there needs to be a v13 ;-)
> >
> > cu,
> > Knut
> >
> >
> >>
> >>> Approximately the lower half of the monitor stays black. The output of the xserver
> >>> is not affected.
> >> Most likely the fastest way to root cause is to bisect, please do. To
> >> keep track of all the bugs we have, please file a bug on DRM/Intel at
> >> [1] and while at it attach dmesg with drm.debug=0xe from the boot.
> >>
> >> BR,
> >> Jani.
> >>
> >>
> >> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
> >>
> >>
> >
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 3.13.0-main-01064-gd978ef1 (knut@golem) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #131 PREEMPT Tue Apr 22 15:32:59 CEST 2014
> > [ 0.000000] Disabled fast string operations
> > [ 0.000000] e820: BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7effff] usable
> > [ 0.000000] BIOS-e820: [mem 0x000000007f7f0000-0x000000007f7f2fff] ACPI NVS
> > [ 0.000000] BIOS-e820: [mem 0x000000007f7f3000-0x000000007f7fffff] ACPI data
> > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> > [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> > [ 0.000000] NX (Execute Disable) protection: active
> > [ 0.000000] SMBIOS 2.3 present.
> > [ 0.000000] DMI: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
> > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> > [ 0.000000] e820: last_pfn = 0x7f7f0 max_arch_pfn = 0x1000000
> > [ 0.000000] MTRR default type: uncachable
> > [ 0.000000] MTRR fixed ranges enabled:
> > [ 0.000000] 00000-9FFFF write-back
> > [ 0.000000] A0000-F7FFF uncachable
> > [ 0.000000] F8000-FBFFF write-through
> > [ 0.000000] FC000-FFFFF uncachable
> > [ 0.000000] MTRR variable ranges enabled:
> > [ 0.000000] 0 base 000000000 mask F80000000 write-back
> > [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
> > [ 0.000000] 2 disabled
> > [ 0.000000] 3 disabled
> > [ 0.000000] 4 disabled
> > [ 0.000000] 5 disabled
> > [ 0.000000] 6 disabled
> > [ 0.000000] 7 disabled
> > [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
> > [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
> > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> > [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
> > [ 0.000000] [mem 0x37600000-0x377fffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
> > [ 0.000000] [mem 0x34000000-0x375fffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
> > [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> > [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
> > [ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfdfff]
> > [ 0.000000] [mem 0x37800000-0x379fffff] page 2M
> > [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
> > [ 0.000000] BRK [0x00de1000, 0x00de1fff] PGTABLE
> > [ 0.000000] RAMDISK: [mem 0x379fb000-0x37feffff]
> > [ 0.000000] Allocated new RAMDISK: [mem 0x37406000-0x379fa331]
> > [ 0.000000] Move RAMDISK from [mem 0x379fb000-0x37fef331] to [mem 0x37406000-0x379fa331]
> > [ 0.000000] ACPI: RSDP 000f9320 000014 (v00 AOpen )
> > [ 0.000000] ACPI: RSDT 7f7f3040 000038 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: FACP 7f7f30c0 000074 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: DSDT 7f7f3180 0042E3 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000E)
> > [ 0.000000] ACPI: FACS 7f7f0000 000040
> > [ 0.000000] ACPI: MCFG 7f7f7580 00003C (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: APIC 7f7f74c0 00005A (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
> > [ 0.000000] ACPI: SSDT 7f7f7600 000222 (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
> > [ 0.000000] ACPI: SSDT 7f7f7a00 0000E0 (v01 PmRef CpuPm 00003000 INTL 20040311)
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] 1147MB HIGHMEM available.
> > [ 0.000000] 891MB LOWMEM available.
> > [ 0.000000] mapped low ram: 0 - 37bfe000
> > [ 0.000000] low ram: 0 - 37bfe000
> > [ 0.000000] BRK [0x00de2000, 0x00de2fff] PGTABLE
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> > [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
> > [ 0.000000] HighMem [mem 0x37bfe000-0x7f7effff]
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> > [ 0.000000] node 0: [mem 0x00100000-0x7f7effff]
> > [ 0.000000] On node 0 totalpages: 522125
> > [ 0.000000] free_area_init_node: node 0, pgdat c07ee748, node_mem_map f6416020
> > [ 0.000000] DMA zone: 32 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> > [ 0.000000] Normal zone: 1752 pages used for memmap
> > [ 0.000000] Normal zone: 224254 pages, LIFO batch:31
> > [ 0.000000] HighMem zone: 2296 pages used for memmap
> > [ 0.000000] HighMem zone: 293874 pages, LIFO batch:31
> > [ 0.000000] Using APIC driver default
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] nr_irqs_gsi: 40
> > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> > [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> > [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
> > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> > [ 0.000000] pcpu-alloc: [0] 0
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520341
> > [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-KINGSTON_SKC100S3120G_50026B722C05CA1A-part1 [email protected]/eth0,[email protected]/00:01:80:62:cf:b1 sky2.legacy_pme=1 acpi_enforce_resources=lax drm.debug=0xe 3 resume=/dev/sda3 i915.fastboot=1 pci=use_crs
> > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f7f0)
> > [ 0.000000] Memory: 2051848K/2088500K available (4486K kernel code, 392K rwdata, 2252K rodata, 500K init, 5504K bss, 36652K reserved, 1175496K highmem)
> > [ 0.000000] virtual kernel memory layout:
> > fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
> > pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
> > vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
> > lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
> > .init : 0xc07f9000 - 0xc0876000 ( 500 kB)
> > .data : 0xc0561c7f - 0xc07f8100 (2649 kB)
> > .text : 0xc0100000 - 0xc0561c7f (4487 kB)
> > [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> > [ 0.000000] Preemptible hierarchical RCU implementation.
> > [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
> > [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
> > [ 0.000000] Console: colour VGA+ 80x25
> > [ 0.000000] console [tty0] enabled
> > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> > [ 0.000000] ... MAX_LOCK_DEPTH: 48
> > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> > [ 0.000000] ... CLASSHASH_SIZE: 4096
> > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> > [ 0.000000] ... CHAINHASH_SIZE: 16384
> > [ 0.000000] memory used by lock dependency info: 3567 kB
> > [ 0.000000] per task-struct memory footprint: 1152 bytes
> > [ 0.000000] tsc: Fast TSC calibration using PIT
> > [ 0.000000] tsc: Detected 1862.782 MHz processor
> > [ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.56 BogoMIPS (lpj=7451128)
> > [ 0.008276] pid_max: default: 32768 minimum: 301
> > [ 0.008476] Security Framework initialized
> > [ 0.008623] AppArmor: AppArmor initialized
> > [ 0.008774] Mount-cache hash table entries: 512
> > [ 0.010338] Disabled fast string operations
> > [ 0.010480] mce: CPU supports 5 MCE banks
> > [ 0.010621] CPU0: Thermal monitoring enabled (TM1)
> > [ 0.010774] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
> > Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
> > tlb_flushall_shift: 6
> > [ 0.011132] CPU: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
> > [ 0.011488] ACPI: Core revision 20131115
> > [ 0.020622] ACPI: All ACPI Tables successfully acquired
> > [ 0.024017] ftrace: allocating 22743 entries in 45 pages
> > [ 0.036596] Performance Events: p6 PMU driver.
> > [ 0.036777] ... version: 0
> > [ 0.036909] ... bit width: 32
> > [ 0.037041] ... generic registers: 2
> > [ 0.037173] ... value mask: 00000000ffffffff
> > [ 0.037310] ... max period: 000000007fffffff
> > [ 0.037446] ... fixed-purpose events: 0
> > [ 0.037578] ... event mask: 0000000000000003
> > [ 0.040928] Enabling APIC mode: Flat. Using 1 I/O APICs
> > [ 0.041531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.044149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> > [ 0.084000] devtmpfs: initialized
> > [ 0.084000] PM: Registering ACPI NVS region [mem 0x7f7f0000-0x7f7f2fff] (12288 bytes)
> > [ 0.084000] NET: Registered protocol family 16
> > [ 0.084000] cpuidle: using governor ladder
> > [ 0.084006] cpuidle: using governor menu
> > [ 0.084310] ACPI: bus type PCI registered
> > [ 0.084660] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> > [ 0.084907] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> > [ 0.085047] PCI: Using MMCONFIG for extended config space
> > [ 0.085183] PCI: Using configuration type 1 for base access
> > [ 0.090388] bio: create slab <bio-0> at 0
> > [ 0.090801] ACPI: Added _OSI(Module Device)
> > [ 0.090936] ACPI: Added _OSI(Processor Device)
> > [ 0.091072] ACPI: Added _OSI(3.0 _SCP Extensions)
> > [ 0.091206] ACPI: Added _OSI(Processor Aggregator Device)
> > [ 0.108176] ACPI: Interpreter enabled
> > [ 0.108321] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
> > [ 0.108617] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> > [ 0.108971] ACPI: (supports S0 S3 S4 S5)
> > [ 0.109104] ACPI: Using IOAPIC for interrupt routing
> > [ 0.109311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> > [ 0.129899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> > [ 0.130047] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> > [ 0.130402] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> > [ 0.131088] PCI host bridge to bus 0000:00
> > [ 0.131224] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [ 0.131364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> > [ 0.131503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> > [ 0.131644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> > [ 0.131786] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
> > [ 0.131927] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff]
> > [ 0.132104] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
> > [ 0.132605] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
> > [ 0.132626] pci 0000:00:02.0: reg 0x10: [mem 0xd5300000-0xd537ffff]
> > [ 0.132638] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407]
> > [ 0.132652] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
> > [ 0.132665] pci 0000:00:02.0: reg 0x1c: [mem 0xd5400000-0xd543ffff]
> > [ 0.132984] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
> > [ 0.133002] pci 0000:00:02.1: reg 0x10: [mem 0xd5380000-0xd53fffff]
> > [ 0.133397] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
> > [ 0.133424] pci 0000:00:1b.0: reg 0x10: [mem 0xd5440000-0xd5443fff 64bit]
> > [ 0.133538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > [ 0.133967] pci 0000:00:1b.0: System wakeup disabled by ACPI
> > [ 0.134209] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
> > [ 0.134318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > [ 0.134539] pci 0000:00:1c.0: System wakeup disabled by ACPI
> > [ 0.134778] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
> > [ 0.134900] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> > [ 0.135121] pci 0000:00:1c.1: System wakeup disabled by ACPI
> > [ 0.135360] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
> > [ 0.135477] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> > [ 0.135700] pci 0000:00:1c.2: System wakeup disabled by ACPI
> > [ 0.136029] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
> > [ 0.136146] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> > [ 0.136368] pci 0000:00:1c.3: System wakeup disabled by ACPI
> > [ 0.136613] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
> > [ 0.136677] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
> > [ 0.136916] pci 0000:00:1d.0: System wakeup disabled by ACPI
> > [ 0.137154] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
> > [ 0.137218] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
> > [ 0.137457] pci 0000:00:1d.1: System wakeup disabled by ACPI
> > [ 0.137695] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
> > [ 0.137759] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
> > [ 0.137998] pci 0000:00:1d.2: System wakeup disabled by ACPI
> > [ 0.138235] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
> > [ 0.138299] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
> > [ 0.138538] pci 0000:00:1d.3: System wakeup disabled by ACPI
> > [ 0.138788] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
> > [ 0.138815] pci 0000:00:1d.7: reg 0x10: [mem 0xd5444000-0xd54443ff]
> > [ 0.138930] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> > [ 0.139141] pci 0000:00:1d.7: System wakeup disabled by ACPI
> > [ 0.139383] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
> > [ 0.139668] pci 0000:00:1e.0: System wakeup disabled by ACPI
> > [ 0.139908] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
> > [ 0.140046] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> > [ 0.140058] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
> > [ 0.140306] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH6 GPIO
> > [ 0.140452] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
> > [ 0.140593] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
> > [ 0.141015] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
> > [ 0.141039] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
> > [ 0.141054] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
> > [ 0.141068] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
> > [ 0.141082] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
> > [ 0.141097] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
> > [ 0.141158] pci 0000:00:1f.2: PME# supported from D3hot
> > [ 0.141459] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
> > [ 0.141533] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
> > [ 0.141952] pci 0000:00:1c.0: PCI bridge to [bus 01]
> > [ 0.142095] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
> > [ 0.142105] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
> > [ 0.142248] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
> > [ 0.142283] pci 0000:02:00.0: reg 0x10: [mem 0xd5220000-0xd5223fff 64bit]
> > [ 0.142302] pci 0000:02:00.0: reg 0x18: [io 0xa000-0xa0ff]
> > [ 0.142363] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
> > [ 0.142461] pci 0000:02:00.0: supports D1 D2
> > [ 0.142465] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 0.142583] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> > [ 0.144137] pci 0000:00:1c.1: PCI bridge to [bus 02]
> > [ 0.144277] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
> > [ 0.144285] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
> > [ 0.144437] pci 0000:03:00.0: [11ab:4362] type 00 class 0x020000
> > [ 0.144471] pci 0000:03:00.0: reg 0x10: [mem 0xd5020000-0xd5023fff 64bit]
> > [ 0.144490] pci 0000:03:00.0: reg 0x18: [io 0xb000-0xb0ff]
> > [ 0.144551] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
> > [ 0.144649] pci 0000:03:00.0: supports D1 D2
> > [ 0.144653] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > [ 0.144771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> > [ 0.145029] pci 0000:00:1c.2: PCI bridge to [bus 03]
> > [ 0.145169] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
> > [ 0.145177] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
> > [ 0.145322] pci 0000:04:00.0: [1095:3132] type 00 class 0x010400
> > [ 0.145361] pci 0000:04:00.0: reg 0x10: [mem 0xd5184000-0xd518407f 64bit]
> > [ 0.145391] pci 0000:04:00.0: reg 0x18: [mem 0xd5180000-0xd5183fff 64bit]
> > [ 0.145411] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc07f]
> > [ 0.145448] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
> > [ 0.145541] pci 0000:04:00.0: supports D1 D2
> > [ 0.145644] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> > [ 0.145908] pci 0000:00:1c.3: PCI bridge to [bus 04]
> > [ 0.146048] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
> > [ 0.146055] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
> > [ 0.146169] pci 0000:05:04.0: [1397:2bd0] type 00 class 0x028000
> > [ 0.148008] pci 0000:05:04.0: reg 0x10: [io 0xd000-0xd007]
> > [ 0.148025] pci 0000:05:04.0: reg 0x14: [mem 0xd4000000-0xd40000ff]
> > [ 0.148128] pci 0000:05:04.0: supports D1 D2
> > [ 0.148132] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
> > [ 0.148262] pci 0000:05:05.0: [14f1:8800] type 00 class 0x040000
> > [ 0.148293] pci 0000:05:05.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
> > [ 0.148525] pci 0000:05:05.1: [14f1:8801] type 00 class 0x048000
> > [ 0.148552] pci 0000:05:05.1: reg 0x10: [mem 0xd1000000-0xd1ffffff]
> > [ 0.148767] pci 0000:05:05.2: [14f1:8802] type 00 class 0x048000
> > [ 0.148794] pci 0000:05:05.2: reg 0x10: [mem 0xd2000000-0xd2ffffff]
> > [ 0.149010] pci 0000:05:05.4: [14f1:8804] type 00 class 0x048000
> > [ 0.149037] pci 0000:05:05.4: reg 0x10: [mem 0xd3000000-0xd3ffffff]
> > [ 0.149294] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
> > [ 0.149435] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> > [ 0.149443] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
> > [ 0.149454] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> > [ 0.149459] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> > [ 0.149464] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> > [ 0.149469] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
> > [ 0.149474] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfebfffff] (subtractive decode)
> > [ 0.149538] pci_bus 0000:00: on NUMA node 0
> > [ 0.151829] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> > [ 0.152467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
> > [ 0.153101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> > [ 0.153737] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> > [ 0.154371] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> > [ 0.155152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> > [ 0.155931] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
> > [ 0.156704] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
> > [ 0.157899] ACPI: \_SB_.PCI0: notify handler is installed
> > [ 0.158068] Found 1 acpi root devices
> > [ 0.158733] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > [ 0.158992] vgaarb: loaded
> > [ 0.159123] vgaarb: bridge control possible 0000:00:02.0
> > [ 0.159465] SCSI subsystem initialized
> > [ 0.159727] libata version 3.00 loaded.
> > [ 0.159747] ACPI: bus type USB registered
> > [ 0.159934] usbcore: registered new interface driver usbfs
> > [ 0.160032] usbcore: registered new interface driver hub
> > [ 0.160222] usbcore: registered new device driver usb
> > [ 0.160430] PCI: Using ACPI for IRQ routing
> > [ 0.168904] PCI: pci_cache_line_size set to 64 bytes
> > [ 0.169011] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
> > [ 0.169026] e820: reserve RAM buffer [mem 0x7f7f0000-0x7fffffff]
> > [ 0.170027] hpet clockevent registered
> > [ 0.170034] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> > [ 0.170177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> > [ 0.170403] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> > [ 0.172268] Switched to clocksource hpet
> > [ 0.192062] AppArmor: AppArmor Filesystem Enabled
> > [ 0.192292] pnp: PnP ACPI init
> > [ 0.192494] ACPI: bus type PNP registered
> > [ 0.193133] system 00:00: [io 0x0b78-0x0b7b] has been reserved
> > [ 0.193278] system 00:00: [io 0x0f78-0x0f7b] has been reserved
> > [ 0.193419] system 00:00: [io 0x0a78-0x0a7b] has been reserved
> > [ 0.193558] system 00:00: [io 0x0e78-0x0e7b] has been reserved
> > [ 0.193700] system 00:00: [io 0x0bbc-0x0bbf] has been reserved
> > [ 0.193839] system 00:00: [io 0x0fbc-0x0fbf] has been reserved
> > [ 0.193980] system 00:00: [io 0x04d0-0x04d1] has been reserved
> > [ 0.194119] system 00:00: [io 0x0290-0x0297] has been reserved
> > [ 0.194259] system 00:00: [io 0x0880-0x088f] has been reserved
> > [ 0.194541] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.194582] pnp 00:01: [dma 4]
> > [ 0.194650] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 0.194761] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 0.194847] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> > [ 0.194945] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 0.195660] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
> > [ 0.196252] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> > [ 0.197211] pnp 00:07: [dma 3]
> > [ 0.197323] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
> > [ 0.197510] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> > [ 0.197712] system 00:09: [io 0x4000-0x40bf] could not be reserved
> > [ 0.197859] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.197981] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
> > [ 0.198771] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
> > [ 0.198918] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.199426] system 00:0c: [mem 0x000d7800-0x000d7fff] has been reserved
> > [ 0.199571] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
> > [ 0.199714] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
> > [ 0.199858] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
> > [ 0.200001] system 00:0c: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
> > [ 0.200155] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
> > [ 0.200298] system 00:0c: [mem 0x00100000-0x7f7effff] could not be reserved
> > [ 0.200441] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
> > [ 0.200583] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
> > [ 0.200727] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
> > [ 0.200868] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
> > [ 0.201012] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
> > [ 0.201153] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
> > [ 0.201296] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
> > [ 0.201441] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 0.201467] pnp: PnP ACPI: found 13 devices
> > [ 0.201601] ACPI: bus type PNP unregistered
> > [ 0.241904] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
> > [ 0.241914] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
> > [ 0.241920] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
> > [ 0.241935] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
> > [ 0.241950] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
> > [ 0.241965] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
> > [ 0.241988] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
> > [ 0.241993] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> > [ 0.241999] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> > [ 0.242004] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> > [ 0.242009] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> > [ 0.242014] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> > [ 0.242024] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
> > [ 0.242171] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
> > [ 0.242417] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x806fffff pref]
> > [ 0.242660] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80700000-0x809fffff pref]
> > [ 0.242903] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80cfffff pref]
> > [ 0.243148] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
> > [ 0.243290] pci 0000:00:1c.0: PCI bridge to [bus 01]
> > [ 0.243429] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> > [ 0.243572] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
> > [ 0.243717] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
> > [ 0.243967] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041ffff pref]
> > [ 0.244216] pci 0000:00:1c.1: PCI bridge to [bus 02]
> > [ 0.244355] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
> > [ 0.244497] pci 0000:00:1c.1: bridge window [mem 0xd5200000-0xd52fffff]
> > [ 0.244642] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x806fffff pref]
> > [ 0.244889] pci 0000:03:00.0: BAR 6: assigned [mem 0x80700000-0x8071ffff pref]
> > [ 0.245128] pci 0000:00:1c.2: PCI bridge to [bus 03]
> > [ 0.245265] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
> > [ 0.245411] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd50fffff]
> > [ 0.245555] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x809fffff pref]
> > [ 0.245802] pci 0000:04:00.0: BAR 6: assigned [mem 0x80a00000-0x80a7ffff pref]
> > [ 0.246044] pci 0000:00:1c.3: PCI bridge to [bus 04]
> > [ 0.246181] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
> > [ 0.246324] pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]
> > [ 0.246467] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80cfffff pref]
> > [ 0.246716] pci 0000:00:1e.0: PCI bridge to [bus 05]
> > [ 0.246853] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> > [ 0.246998] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd4ffffff]
> > [ 0.247147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> > [ 0.247152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> > [ 0.247156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> > [ 0.247161] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
> > [ 0.247165] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xfebfffff]
> > [ 0.247170] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
> > [ 0.247174] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
> > [ 0.247179] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
> > [ 0.247184] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
> > [ 0.247188] pci_bus 0000:02: resource 1 [mem 0xd5200000-0xd52fffff]
> > [ 0.247192] pci_bus 0000:02: resource 2 [mem 0x80400000-0x806fffff pref]
> > [ 0.247197] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
> > [ 0.247202] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd50fffff]
> > [ 0.247206] pci_bus 0000:03: resource 2 [mem 0x80700000-0x809fffff pref]
> > [ 0.247211] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
> > [ 0.247215] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd51fffff]
> > [ 0.247219] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80cfffff pref]
> > [ 0.247224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> > [ 0.247228] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd4ffffff]
> > [ 0.247233] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
> > [ 0.247237] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
> > [ 0.247242] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
> > [ 0.247246] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
> > [ 0.247250] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xfebfffff]
> > [ 0.247326] NET: Registered protocol family 2
> > [ 0.248104] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> > [ 0.248323] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
> > [ 0.249510] TCP: Hash tables configured (established 8192 bind 8192)
> > [ 0.249731] TCP: reno registered
> > [ 0.249867] UDP hash table entries: 512 (order: 3, 40960 bytes)
> > [ 0.250144] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
> > [ 0.250721] NET: Registered protocol family 1
> > [ 0.250882] pci 0000:00:02.0: Boot video device
> > [ 1.852022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
> > [ 1.852465] PCI: CLS 32 bytes, default 64
> > [ 1.852853] Unpacking initramfs...
> > [ 2.103109] Freeing initrd memory: 6100K (f7406000 - f79fb000)
> > [ 2.103891] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
> > [ 2.104297] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
> > [ 2.105286] audit: initializing netlink socket (disabled)
> > [ 2.105504] type=2000 audit(1398174179.104:1): initialized
> > [ 2.145984] bounce pool size: 64 pages
> > [ 2.146121] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> > [ 2.146615] VFS: Disk quotas dquot_6.5.2
> > [ 2.146765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > [ 2.147322] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> > [ 2.147796] fuse init (API version 7.22)
> > [ 2.148062] msgmni has been set to 1723
> > [ 2.161978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> > [ 2.162254] io scheduler noop registered
> > [ 2.162388] io scheduler deadline registered
> > [ 2.162527] io scheduler cfq registered (default)
> > [ 2.163007] pcieport 0000:00:1c.0: enabling device (0100 -> 0103)
> > [ 2.163645] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
> > [ 2.164295] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
> > [ 2.164727] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
> > [ 2.165139] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
> > [ 2.165603] intel_idle: does not run on family 6 model 13
> > [ 2.165824] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> > [ 2.166146] ACPI: Power Button [PWRB]
> > [ 2.166436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> > [ 2.166682] ACPI: Power Button [PWRF]
> > [ 2.167069] ACPI: Fan [FAN] (on)
> > [ 2.167381] ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points
> > [ 2.167622] ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points
> > [ 2.167861] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling
> > [ 2.169578] thermal LNXTHERM:00: registered as thermal_zone0
> > [ 2.169717] ACPI: Thermal Zone [THRM] (61 C)
> > [ 2.169971] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
> > [ 2.190965] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> > [ 2.212060] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> > [ 2.216353] lp: driver loaded but no devices found
> > [ 2.216724] Non-volatile memory driver v1.3
> > [ 2.216855] Linux agpgart interface v0.103
> > [ 2.217101] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
> > [ 2.217336] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
> > [ 2.218068] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
> > [ 2.218520] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
> > [ 2.218758] [drm] Initialized drm 1.1.0 20060810
> > [ 2.221333] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
> > [ 2.221459] [drm:intel_detect_pch], No PCH found?
> > [ 2.221465] [drm] Memory usable by graphics device = 256M
> > [ 2.221601] [drm:i915_gem_gtt_init], GMADR size = 256M
> > [ 2.221604] [drm:i915_gem_gtt_init], GTT stolen size = 8M
> > [ 2.222858] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
> > [ 2.222864] [drm:intel_opregion_setup], ACPI OpRegion not supported!
> > [ 2.222931] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> > [ 2.223076] [drm] Driver supports precise vblank timestamp query.
> > [ 2.223216] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
> > [ 2.223653] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
> > [ 2.223659] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> > [ 2.223692] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
> > [ 2.223698] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> > [ 2.223720] [drm:parse_lfp_panel_data], VBT initial LVDS value 40000300
> > [ 2.223733] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 0, level 0
> > [ 2.223755] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
> > [ 2.223761] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> > [ 2.223767] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
> > [ 2.223773] [drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
> > [ 2.223777] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 72 is found on SDVOC port
> > [ 2.223782] [drm:parse_sdvo_device_mapping], SDVO device: dvo=2, addr=72, wiring=0, ddc_pin=29, i2c_pin=5
> > [ 2.223833] [drm:parse_mipi], No MIPI BDB found
> > [ 2.223922] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
> > [ 2.223985] [drm:intel_display_power_get], enabling always-on
> > [ 2.224405] [drm:intel_modeset_init], 2 display pipes available.
> > [ 2.224508] [drm:intel_crtc_init], swapping pipes & planes for FBC
> > [ 2.224512] [drm:intel_modeset_init], pipe A sprite A init failed: -19
> > [ 2.224524] [drm:intel_crtc_init], swapping pipes & planes for FBC
> > [ 2.224528] [drm:intel_modeset_init], pipe B sprite B init failed: -19
> > [ 2.224540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> > [ 2.225123] [drm] Skipping LVDS initialization for AOpen i915GMm-HFS
> > [ 2.228383] [drm:intel_setup_outputs], probing SDVOB
> > [ 2.228388] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
> > [ 2.301204] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
> > [ 2.313354] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 3C 06 01 01 01 01 00
> > [ 2.313362] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
> > vendor_id: 2
> > device_id: 60
> > device_rev_id: 6
> > sdvo_version_major: 1
> > sdvo_version_minor: 1
> > sdvo_inputs_mask: 1
> > smooth_scaling: 0
> > sharp_scaling: 0
> > up_scaling: 0
> > down_scaling: 0
> > stall_support: 0
> > output_flags: 1
> > [ 2.313376] [drm:intel_sdvo_dvi_init], initialising DVI device 0
> > [ 2.313383] [drm:intel_sdvo_debug_write], SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
> > [ 2.318730] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.318736] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
> > [ 2.322303] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
> > [ 2.325385] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
> > [ 2.325475] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
> > [ 2.329359] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 2.329365] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
> > [ 2.336975] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
> > [ 2.336980] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:3C.06, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
> > [ 2.336985] [drm:intel_setup_outputs], probing SDVOC
> > [ 2.336992] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
> > [ 2.409700] [drm:intel_sdvo_debug_write], SDVOC: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
> > [ 2.421845] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 C2 01 01 01 3D 3E 00
> > [ 2.421852] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
> > vendor_id: 2
> > device_id: 194
> > device_rev_id: 1
> > sdvo_version_major: 1
> > sdvo_version_minor: 1
> > sdvo_inputs_mask: 1
> > smooth_scaling: 1
> > sharp_scaling: 1
> > up_scaling: 1
> > down_scaling: 1
> > stall_support: 0
> > output_flags: 62
> > [ 2.421866] [drm:intel_sdvo_tv_init], initialising TV type 8
> > [ 2.421959] [drm:intel_sdvo_debug_write], SDVOC: W: 11 08 00 (SDVO_CMD_SET_TARGET_OUTPUT)
> > [ 2.426662] [drm:intel_sdvo_read_response], SDVOC: R: (Success)
> > [ 2.426668] [drm:intel_sdvo_debug_write], SDVOC: W: 27 (SDVO_CMD_GET_SUPPORTED_TV_FORMATS)
> > [ 2.436547] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF FF FF FF FF 1F
> > [ 2.436581] [drm:intel_sdvo_debug_write], SDVOC: W: 84 (SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS)
> > [ 2.441931] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FA DF
> > [ 2.441937] [drm:intel_sdvo_debug_write], SDVOC: W: 61 (SDVO_CMD_GET_MAX_OVERSCAN_H)
> > [ 2.449558] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
> > [ 2.449564] [drm:intel_sdvo_debug_write], SDVOC: W: 62 (SDVO_CMD_GET_OVERSCAN_H)
> > [ 2.454913] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
> > [ 2.454921] [drm:intel_sdvo_create_enhance_property_tv], h_overscan: max 47, default 32, current 32
> > [ 2.454927] [drm:intel_sdvo_debug_write], SDVOC: W: 64 (SDVO_CMD_GET_MAX_OVERSCAN_V)
> > [ 2.462549] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 2F 00 20 00
> > [ 2.462554] [drm:intel_sdvo_debug_write], SDVOC: W: 65 (SDVO_CMD_GET_OVERSCAN_V)
> > [ 2.467902] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 20 00
> > [ 2.467909] [drm:intel_sdvo_create_enhance_property_tv], v_overscan: max 47, default 32, current 32
> > [ 2.467915] [drm:intel_sdvo_debug_write], SDVOC: W: 67 (SDVO_CMD_GET_MAX_HPOS)
> > [ 2.475537] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
> > [ 2.475543] [drm:intel_sdvo_debug_write], SDVOC: W: 68 (SDVO_CMD_GET_HPOS)
> > [ 2.480891] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
> > [ 2.480897] [drm:intel_sdvo_create_enhance_property_tv], hpos: max 1023, default 512, current 512
> > [ 2.480902] [drm:intel_sdvo_debug_write], SDVOC: W: 6A (SDVO_CMD_GET_MAX_VPOS)
> > [ 2.488523] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 03 00 02
> > [ 2.488529] [drm:intel_sdvo_debug_write], SDVOC: W: 6B (SDVO_CMD_GET_VPOS)
> > [ 2.493875] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 02
> > [ 2.493881] [drm:intel_sdvo_create_enhance_property_tv], vpos: max 1023, default 512, current 512
> > [ 2.493886] [drm:intel_sdvo_debug_write], SDVOC: W: 55 (SDVO_CMD_GET_MAX_SATURATION)
> > [ 2.501502] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 45 00
> > [ 2.501508] [drm:intel_sdvo_debug_write], SDVOC: W: 56 (SDVO_CMD_GET_SATURATION)
> > [ 2.506857] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 45 00
> > [ 2.506863] [drm:intel_sdvo_create_enhance_property_tv], saturation: max 127, default 69, current 69
> > [ 2.506869] [drm:intel_sdvo_debug_write], SDVOC: W: 5E (SDVO_CMD_GET_MAX_CONTRAST)
> > [ 2.514491] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
> > [ 2.514497] [drm:intel_sdvo_debug_write], SDVOC: W: 5F (SDVO_CMD_GET_CONTRAST)
> > [ 2.519846] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
> > [ 2.519852] [drm:intel_sdvo_create_enhance_property_tv], contrast: max 127, default 64, current 64
> > [ 2.519857] [drm:intel_sdvo_debug_write], SDVOC: W: 58 (SDVO_CMD_GET_MAX_HUE)
> > [ 2.527473] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 7F 00 40 00
> > [ 2.527479] [drm:intel_sdvo_debug_write], SDVOC: W: 59 (SDVO_CMD_GET_HUE)
> > [ 2.532832] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 40 00
> > [ 2.532838] [drm:intel_sdvo_create_enhance_property_tv], hue: max 127, default 64, current 64
> > [ 2.532844] [drm:intel_sdvo_debug_write], SDVOC: W: 6D (SDVO_CMD_GET_MAX_SHARPNESS)
> > [ 2.540467] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 04 00
> > [ 2.540473] [drm:intel_sdvo_debug_write], SDVOC: W: 6E (SDVO_CMD_GET_SHARPNESS)
> > [ 2.545819] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 04 00
> > [ 2.545825] [drm:intel_sdvo_create_enhance_property_tv], sharpness: max 7, default 4, current 4
> > [ 2.545830] [drm:intel_sdvo_debug_write], SDVOC: W: 5B (SDVO_CMD_GET_MAX_BRIGHTNESS)
> > [ 2.553446] [drm:intel_sdvo_read_response], SDVOC: R: (Success) FF 00 80 00
> > [ 2.553451] [drm:intel_sdvo_debug_write], SDVOC: W: 5C (SDVO_CMD_GET_BRIGHTNESS)
> > [ 2.558797] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 80 00
> > [ 2.558804] [drm:intel_sdvo_create_enhance_property_tv], brightness: max 255, default 128, current 128
> > [ 2.558809] [drm:intel_sdvo_debug_write], SDVOC: W: 7B (SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE)
> > [ 2.566432] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00 07 00
> > [ 2.566438] [drm:intel_sdvo_debug_write], SDVOC: W: 50 (SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE)
> > [ 2.571783] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 07 00
> > [ 2.571789] [drm:intel_sdvo_create_enhance_property_tv], flicker_filter_adaptive: max 7, default 7, current 7
> > [ 2.571795] [drm:intel_sdvo_debug_write], SDVOC: W: 74 (SDVO_CMD_GET_MAX_TV_CHROMA_FILTER)
> > [ 2.579413] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 03 00 01 00
> > [ 2.579418] [drm:intel_sdvo_debug_write], SDVOC: W: 75 (SDVO_CMD_GET_TV_CHROMA_FILTER)
> > [ 2.584769] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 01 00
> > [ 2.584775] [drm:intel_sdvo_create_enhance_property_tv], tv_chroma_filter: max 3, default 1, current 1
> > [ 2.584781] [drm:intel_sdvo_debug_write], SDVOC: W: 77 (SDVO_CMD_GET_MAX_TV_LUMA_FILTER)
> > [ 2.592397] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 02 00 00 00
> > [ 2.592402] [drm:intel_sdvo_debug_write], SDVOC: W: 78 (SDVO_CMD_GET_TV_LUMA_FILTER)
> > [ 2.597751] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
> > [ 2.597757] [drm:intel_sdvo_create_enhance_property_tv], tv_luma_filter: max 2, default 0, current 0
> > [ 2.597763] [drm:intel_sdvo_debug_write], SDVOC: W: 70 (SDVO_CMD_GET_DOT_CRAWL)
> > [ 2.603112] [drm:intel_sdvo_read_response], SDVOC: R: (Success) 00 00
> > [ 2.603118] [drm:intel_sdvo_create_enhance_property_tv], dot crawl: current 0
> > [ 2.603121] [drm:intel_sdvo_tv_init], initialising TV type 4
> > [ 2.603235] ------------[ cut here ]------------
> > [ 2.603371] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x68/0x7a()
> > [ 2.603605] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/i2c-7/i2c-7'
> > [ 2.603841] Modules linked in:
> > [ 2.603992] CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-main-01064-gd978ef1 #131
> > [ 2.604232] Hardware name: /i915GMm-HFS, BIOS 6.00 PG 09/14/2005
> > [ 2.604367] 00000000 f6079c64 f6079c3c c055593e f6079c54 c012a6a9 c022bc73 f6366000
> > [ 2.604781] f6366000 f6367200 f6079c6c c012a6eb 00000009 f6079c64 c06f0720 f6079c80
> > [ 2.605194] f6079c90 c022bc73 c06f06d0 000001e6 c06f0720 f6366000 f6367200 f6371c00
> > [ 2.605606] Call Trace:
> > [ 2.605736] [<c055593e>] dump_stack+0x16/0x18
> > [ 2.605871] [<c012a6a9>] warn_slowpath_common+0x5f/0x76
> > [ 2.606005] [<c022bc73>] ? sysfs_warn_dup+0x68/0x7a
> > [ 2.606139] [<c012a6eb>] warn_slowpath_fmt+0x2b/0x2f
> > [ 2.606273] [<c022bc73>] sysfs_warn_dup+0x68/0x7a
> > [ 2.606407] [<c022bcaa>] sysfs_add_one+0x25/0x2c
> > [ 2.606541] [<c022c567>] sysfs_do_create_link_sd.isra.2+0xc4/0x136
> > [ 2.606678] [<c022c5fd>] sysfs_create_link+0x24/0x2e
> > [ 2.606814] [<c0405e55>] intel_sdvo_connector_init+0x82/0xa2
> > [ 2.606950] [<c0407ad4>] intel_sdvo_tv_init+0x81/0x1cf
> > [ 2.607086] [<c0408a7b>] intel_sdvo_init+0x2ef/0x658
> > [ 2.607221] [<c039e331>] ? drm_ut_debug_printk+0x41/0x55
> > [ 2.607358] [<c03ed664>] intel_modeset_init+0xabd/0xdae
> > [ 2.607494] [<c055e27a>] ? preempt_count_sub+0xa8/0xb5
> > [ 2.607630] [<c055ae44>] ? _raw_spin_unlock_irqrestore+0x44/0x56
> > [ 2.607768] [<c03cfec6>] ? i915_irq_postinstall+0xee/0xf8
> > [ 2.607903] [<c039c688>] ? drm_irq_install+0x155/0x1b5
> > [ 2.608046] [<c03d0fbf>] ? i965_irq_handler+0x480/0x480
> > [ 2.608181] [<c040c7b4>] i915_driver_load+0xa53/0xcc3
> > [ 2.608318] [<c039e8cb>] drm_dev_register+0xb8/0x11b
> > [ 2.608452] [<c03a04d1>] drm_get_pci_dev+0xec/0x18a
> > [ 2.608587] [<c03acd4a>] i915_pci_probe+0x3e/0x47
> > [ 2.608722] [<c030d636>] pci_device_probe+0x5c/0xa4
> > [ 2.608857] [<c0419fce>] driver_probe_device+0x83/0x17a
> > [ 2.608991] [<c041a149>] __driver_attach+0x53/0x6f
> > [ 2.609127] [<c0418b32>] bus_for_each_dev+0x58/0x67
> > [ 2.609261] [<c0419bf2>] driver_attach+0x19/0x1b
> > [ 2.609394] [<c041a0f6>] ? __device_attach+0x31/0x31
> > [ 2.609528] [<c0419912>] bus_add_driver+0xd4/0x18b
> > [ 2.609661] [<c041a609>] driver_register+0x74/0xa9
> > [ 2.609795] [<c030ce6f>] __pci_register_driver+0x4a/0x4d
> > [ 2.609932] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
> > [ 2.610168] [<c03a05c5>] drm_pci_init+0x56/0xc9
> > [ 2.610302] [<c08231bb>] ? ftrace_define_fields_drm_vblank_event_delivered+0x65/0x65
> > [ 2.610538] [<c082321d>] i915_init+0x62/0x64
> > [ 2.610670] [<c01003e7>] do_one_initcall+0x7c/0x105
> > [ 2.610805] [<c07f9400>] ? do_early_param+0x3d/0x73
> > [ 2.610940] [<c0140cc6>] ? parse_args+0x16c/0x203
> > [ 2.611074] [<c07f9a4f>] kernel_init_freeable+0xdb/0x158
> > [ 2.611210] [<c054f9fe>] kernel_init+0xd/0xdf
> > [ 2.611344] [<c0560937>] ret_from_kernel_thread+0x1b/0x28
> > [ 2.611479] [<c054f9f1>] ? rest_init+0xa5/0xa5
> > [ 2.611666] ---[ end trace cd346fb3f5b5c52d ]---
> > [ 2.613964] [drm:intel_sdvo_init], SDVO output failed to setup on SDVOC
> > [ 2.614565] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
> > [ 2.614731] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
> > [ 2.614737] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: disabled
> > [ 2.614743] [drm:intel_modeset_readout_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe A
> > [ 2.614750] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.620297] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.620304] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.632814] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.632820] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.645339] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.645346] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.649684] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.649688] [drm:intel_modeset_readout_hw_state], [ENCODER:7:TMDS-7] hw state readout: enabled, pipe A
> > [ 2.649694] [drm:intel_modeset_readout_hw_state], [ENCODER:10:TV-10] hw state readout: disabled, pipe A
> > [ 2.649700] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
> > [ 2.649706] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.655201] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.655205] [drm:intel_modeset_readout_hw_state], [CONNECTOR:8:DVI-D-1] hw state readout: enabled
> > [ 2.655210] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:SVIDEO-1] hw state readout: disabled
> > [ 2.655213] [drm:intel_modeset_setup_hw_state], [CRTC:3] found active mode:
> > [ 2.655219] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
> > [ 2.655227] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
> > [ 2.655230] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 2.655234] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 2.655239] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655243] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655247] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.655252] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
> > [ 2.655255] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.655260] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
> > [ 2.655266] [drm:intel_dump_crtc_timings], crtc timings: 28320 720 765 873 900 400 412 414 449, type: 0x0 flags: 0x6
> > [ 2.655269] [drm:intel_dump_pipe_config], port clock: 113280
> > [ 2.655273] [drm:intel_dump_pipe_config], pipe src size: 720x400
> > [ 2.655277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.655281] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.655284] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.655288] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.655293] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
> > [ 2.655297] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 2.655300] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
> > [ 2.655305] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655309] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.655313] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.655318] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 2.655321] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.655326] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> > [ 2.655331] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
> > [ 2.655335] [drm:intel_dump_pipe_config], port clock: 0
> > [ 2.655338] [drm:intel_dump_pipe_config], pipe src size: 0x0
> > [ 2.655342] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.655346] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.655349] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.655353] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.655361] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.660867] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.660871] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 2.660877] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.666381] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.666386] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 2.666392] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 2.666398] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.671900] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.671904] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 2.671909] [drm:check_crtc_state], [CRTC:3]
> > [ 2.671925] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.677425] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.677431] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.689935] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.689941] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.702442] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.702449] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.706782] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.706787] [drm:check_crtc_state], [CRTC:4]
> > [ 2.706799] [drm:i9xx_get_plane_config], pipe/plane 0/1 with fb: size=720x400@32, offset=0, pitch 3200, size 0x139000
> > [ 2.706804] [drm:i915_gem_object_create_stolen_for_preallocated], creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=139000
> > [ 2.706879] [drm:i915_pages_create_for_stolen], offset=0x0, size=1282048
> > [ 2.706966] [drm:intel_alloc_plane_obj], plane fb obj f6373e40
> > [ 2.706972] [drm:i915_gem_setup_global_gtt], reserving preallocated space: 0 + 139000
> > [ 2.706976] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [139000, ffff000]
> > [ 2.709450] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
> > [ 2.709471] [drm:i915_pages_create_for_stolen], offset=0x139000, size=131072
> > [ 2.709884] [drm] initialized overlay support
> > [ 2.710017] [drm:intel_fbdev_init_bios], found possible fb from plane A
> > [ 2.710020] [drm:intel_fbdev_init_bios], pipe B not active or no fb, skipping
> > [ 2.710024] [drm:intel_fbdev_init_bios], checking plane A for BIOS fb
> > [ 2.710028] [drm:intel_fbdev_init_bios], pipe A area: 288000
> > [ 2.710031] [drm:intel_fbdev_init_bios], total size 1152000 (bpp 4)
> > [ 2.710035] [drm:intel_fbdev_init_bios], fb big enough for plane A (1282048 >= 1152000)
> > [ 2.710039] [drm:intel_fbdev_init_bios], pipe B not active, skipping
> > [ 2.710044] [drm:intel_fbdev_init_bios], using BIOS fb for initial console
> > [ 2.710054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
> > [ 2.710059] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=1
> > [ 2.712024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 2.712028] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.712032] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 2.712036] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 2.712368] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.712372] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 2.712375] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 2.712380] [drm:intel_get_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
> > [ 2.712402] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
> > [ 2.712499] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> > [ 2.712505] [drm:connected_sink_compute_bpp], [CONNECTOR:5:VGA-1] checking for sink bpp constrains
> > [ 2.712533] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 2.712537] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
> > [ 2.712541] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 2.712544] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 2.712549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.712553] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.712557] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.712562] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
> > [ 2.712566] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.712571] [drm:drm_mode_debug_printmodeline], Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
> > [ 2.712577] [drm:intel_dump_crtc_timings], crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
> > [ 2.712580] [drm:intel_dump_pipe_config], port clock: 31500
> > [ 2.712584] [drm:intel_dump_pipe_config], pipe src size: 640x480
> > [ 2.712588] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.712592] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.712595] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.712599] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.714954] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 2560
> > [ 2.714960] [drm:intel_update_fbc], disabled per chip default
> > [ 2.714967] [drm:intel_crtc_mode_set], [ENCODER:6:DAC-6] set [MODE:0:640x480]
> > [ 2.715720] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 2.715725] [drm:intel_calculate_wm], FIFO entries required for mode: 10
> > [ 2.715728] [drm:intel_calculate_wm], FIFO watermark level: 16
> > [ 2.715733] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 2.715736] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 2.715739] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 2.715743] [drm:i9xx_update_wm], FIFO watermarks - A: 16, B: 20
> > [ 2.715748] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 16, B: 20, C: 2, SR 1
> > [ 2.715752] [drm:i9xx_update_wm], memory self refresh disabled
> > [ 2.736020] [drm:intel_update_fbc], more than one pipe active, disabling compression
> > [ 2.736030] [drm:intel_connector_check_state], [CONNECTOR:5:VGA-1]
> > [ 2.736037] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.741571] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.741575] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 2.741582] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.747093] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.747098] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 2.747104] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 2.747110] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.752626] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.752630] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 2.752635] [drm:check_crtc_state], [CRTC:3]
> > [ 2.752652] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.758158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.758164] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.770686] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.770692] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.783214] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.783220] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.787557] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.787561] [drm:check_crtc_state], [CRTC:4]
> > [ 2.804021] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 2.804025] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.804029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 2.804033] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 2.804374] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 2.804378] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 2.804382] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 2.804385] [drm:intel_crt_load_detect], starting load-detect on CRT
> > [ 2.812019] [drm:intel_release_load_detect_pipe], [CONNECTOR:5:VGA-1], [ENCODER:6:DAC-6]
> > [ 2.812024] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
> > [ 2.844985] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 2.844990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 2.844993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 2.844997] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 2.845000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
> > [ 2.845004] [drm:i9xx_update_wm], self-refresh entries: 45
> > [ 2.845009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
> > [ 2.845014] [drm:i9xx_update_wm], memory self refresh enabled
> > [ 2.845017] [drm:intel_update_fbc], disabled per chip default
> > [ 2.845031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.850537] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.850541] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 2.850548] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.856056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.856061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 2.856066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 2.856073] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.861589] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.861593] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 2.861597] [drm:check_crtc_state], [CRTC:3]
> > [ 2.861613] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 2.867118] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.867124] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 2.879645] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 2.879650] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 2.892173] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 2.892179] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 2.896517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 2.896521] [drm:check_crtc_state], [CRTC:4]
> > [ 2.896657] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
> > [ 2.896662] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1]
> > [ 2.896666] [drm:intel_sdvo_detect], [CONNECTOR:8:DVI-D-1]
> > [ 2.896672] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
> > [ 2.902454] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 2.902458] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
> > [ 2.902465] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.906363] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.943050] [drm:intel_sdvo_get_ddc_modes], [CONNECTOR:8:DVI-D-1]
> > [ 2.943057] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.946942] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> > [ 2.983605] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
> > [ 2.983626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:DVI-D-1] probed modes :
> > [ 2.983633] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 2.983639] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> > [ 2.983645] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> > [ 2.983651] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> > [ 2.983657] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> > [ 2.983661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1]
> > [ 2.983665] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=1
> > [ 2.983670] [drm:intel_get_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
> > [ 2.983674] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
> > [ 2.983693] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> > [ 2.983699] [drm:connected_sink_compute_bpp], [CONNECTOR:9:SVIDEO-1] checking for sink bpp constrains
> > [ 2.983703] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
> > [ 2.983709] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 2.983713] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
> > [ 2.983716] [drm:intel_dump_pipe_config], cpu_transcoder: B
> > [ 2.983720] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 2.983724] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.983729] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 2.983732] [drm:intel_dump_pipe_config], requested mode:
> > [ 2.983738] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
> > [ 2.983741] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 2.983747] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
> > [ 2.983752] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
> > [ 2.983756] [drm:intel_dump_pipe_config], port clock: 108000
> > [ 2.983760] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
> > [ 2.983764] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 2.983768] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 2.983771] [drm:intel_dump_pipe_config], ips: 0
> > [ 2.983774] [drm:intel_dump_pipe_config], double wide: 0
> > [ 2.993290] [drm:i9xx_update_plane], Writing base 00160000 00000000 0 0 5120
> > [ 2.993305] [drm:intel_crtc_mode_set], [ENCODER:10:TV-10] set [MODE:0:NTSC 480i]
> > [ 2.999122] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 2.999126] [drm:intel_calculate_wm], FIFO entries required for mode: 34
> > [ 2.999130] [drm:intel_calculate_wm], FIFO watermark level: -8
> > [ 2.999134] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 2.999138] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 2.999141] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 2.999145] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 20
> > [ 2.999150] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 20, C: 2, SR 1
> > [ 2.999154] [drm:i9xx_update_wm], memory self refresh disabled
> > [ 3.020020] [drm:intel_update_fbc], more than one pipe active, disabling compression
> > [ 3.020035] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.025549] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.025554] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 3.025560] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.031068] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.031073] [drm:intel_connector_check_state], [CONNECTOR:9:SVIDEO-1]
> > [ 3.031078] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 3.031084] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 3.031090] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.036595] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.036599] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 3.036603] [drm:check_crtc_state], [CRTC:3]
> > [ 3.036621] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.042131] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.042137] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 3.054659] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 3.054665] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 3.067186] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 3.067192] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 3.071529] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 3.071535] [drm:check_crtc_state], [CRTC:4]
> > [ 3.100115] tsc: Refined TSC clocksource calibration: 1862.713 MHz
> > [ 3.108021] [drm:intel_tv_detect_type], TV detected: 400c0c07, 7f0000aa
> > [ 3.108025] [drm:intel_tv_detect_type], Unrecognised TV connection
> > [ 3.140020] [drm:intel_release_load_detect_pipe], [CONNECTOR:9:SVIDEO-1], [ENCODER:10:TV-10]
> > [ 3.140026] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
> > [ 3.184984] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 3.184989] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 3.184993] [drm:intel_calculate_wm], FIFO entries required for mode: 9
> > [ 3.184996] [drm:intel_calculate_wm], FIFO watermark level: 20
> > [ 3.185000] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 20
> > [ 3.185004] [drm:i9xx_update_wm], self-refresh entries: 45
> > [ 3.185009] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 20, C: 2, SR 50
> > [ 3.185013] [drm:i9xx_update_wm], memory self refresh enabled
> > [ 3.185017] [drm:intel_update_fbc], disabled per chip default
> > [ 3.185031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.190539] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.190544] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 3.190550] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.196056] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.196061] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 3.196066] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 3.196072] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.201576] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.201580] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 3.201584] [drm:check_crtc_state], [CRTC:3]
> > [ 3.201600] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.207107] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.207113] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 3.219632] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 0B D0 B4 20 90 31 10
> > [ 3.219638] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 3.232158] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 2D 6C C2 00 1C 00 00 00
> > [ 3.232165] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 3.236510] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 08
> > [ 3.236515] [drm:check_crtc_state], [CRTC:4]
> > [ 3.236626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:SVIDEO-1] disconnected
> > [ 3.236631] [drm:drm_setup_crtcs],
> > [ 3.236635] [drm:drm_enable_connectors], connector 5 enabled? no
> > [ 3.236639] [drm:drm_enable_connectors], connector 8 enabled? yes
> > [ 3.236643] [drm:drm_enable_connectors], connector 9 enabled? no
> > [ 3.236647] [drm:intel_fb_initial_config], connector 5 not enabled, skipping
> > [ 3.236651] [drm:intel_fb_initial_config], looking for cmdline mode on connector 8
> > [ 3.236655] [drm:intel_fb_initial_config], looking for preferred mode on connector 8
> > [ 3.236659] [drm:intel_fb_initial_config], connector DVI-D-1 on crtc 3: 1280x1024
> > [ 3.236663] [drm:intel_fb_initial_config], connector 9 not enabled, skipping
> > [ 3.236667] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
> > [ 3.236676] [drm:intelfb_create], re-using BIOS fb
> > [ 3.236892] [drm:intelfb_create], allocated 720x400 fb: 0x00000000, bo f6373e40
> > [ 3.237675] fbcon: inteldrmfb (fb0) is primary device
> > [ 3.241496] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.241501] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
> > [ 3.241506] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 28320 720 765 873 900 400 412 414 449 0x0 0x6
> > [ 3.241510] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 3.241512] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
> > [ 3.241515] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.241519] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> > [ 3.241523] [drm:connected_sink_compute_bpp], [CONNECTOR:8:DVI-D-1] checking for sink bpp constrains
> > [ 3.241526] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO
> > [ 3.241540] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
> > [ 3.241542] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
> > [ 3.241544] [drm:intel_dump_pipe_config], cpu_transcoder: A
> > [ 3.241546] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
> > [ 3.241549] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 3.241551] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> > [ 3.241553] [drm:intel_dump_pipe_config], requested mode:
> > [ 3.241557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 3.241559] [drm:intel_dump_pipe_config], adjusted mode:
> > [ 3.241562] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
> > [ 3.241566] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
> > [ 3.241568] [drm:intel_dump_pipe_config], port clock: 108000
> > [ 3.241570] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
> > [ 3.241572] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> > [ 3.241575] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> > [ 3.241576] [drm:intel_dump_pipe_config], ips: 0
> > [ 3.241578] [drm:intel_dump_pipe_config], double wide: 0
> > [ 3.241583] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
> > [ 3.246688] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.260987] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 3.260990] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 3.260992] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
> > [ 3.260995] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
> > [ 3.260998] [drm:i9xx_update_wm], memory self refresh disabled
> > [ 3.260999] [drm:intel_update_fbc], no output, disabling
> > [ 3.261240] [drm:i9xx_update_plane], Writing base 00000000 00000000 0 0 3200
> > [ 3.261248] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024]
> > [ 3.261253] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
> > [ 3.268071] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.268075] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
> > [ 3.273147] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.273153] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
> > [ 3.283457] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.283462] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
> > [ 3.293770] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.293775] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
> > [ 3.297977] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.297982] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE)
> > [ 3.302181] [drm:intel_sdvo_read_response], SDVOB: R: ... failed
> > [ 3.302187] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
> > [ 3.312503] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.312508] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
> > [ 3.322809] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.322814] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
> > [ 3.327010] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.327784] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
> > [ 3.327787] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
> > [ 3.327789] [drm:intel_calculate_wm], FIFO entries required for mode: 34
> > [ 3.327791] [drm:intel_calculate_wm], FIFO watermark level: -5
> > [ 3.327793] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
> > [ 3.327795] [drm:i9xx_update_wm], self-refresh entries: 80
> > [ 3.327798] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 15
> > [ 3.327802] [drm:i9xx_update_wm], memory self refresh enabled
> > [ 3.348019] [drm:intel_update_fbc], disabled per chip default
> > [ 3.380022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
> > [ 3.384583] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
> > [ 3.384587] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
> > [ 3.389658] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
> > [ 3.389666] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.395449] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.395451] [drm:intel_connector_check_state], [CONNECTOR:8:DVI-D-1]
> > [ 3.395456] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.401241] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.401245] [drm:check_encoder_state], [ENCODER:6:DAC-6]
> > [ 3.401249] [drm:check_encoder_state], [ENCODER:7:TMDS-7]
> > [ 3.401254] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.407033] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.407036] [drm:check_encoder_state], [ENCODER:10:TV-10]
> > [ 3.407038] [drm:check_crtc_state], [CRTC:3]
> > [ 3.407056] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
> > [ 3.412852] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
> > [ 3.412857] [drm:intel_sdvo_debug_write], SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1)
> > [ 3.426023] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 2A 00 98 51 00 2A 40
> > [ 3.426028] [drm:intel_sdvo_debug_write], SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2)
> > [ 3.439507] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 30 70 13 00 1E 00 00 00
> > [ 3.439512] [drm:intel_sdvo_debug_write], SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT)
> > [ 3.444085] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
> > [ 3.444087] [drm:check_crtc_state], [CRTC:4]
> > [ 3.444093] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
> > [ 3.444098] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
> > [ 3.444101] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.444129] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.444134] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 3.444136] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.446774] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.446779] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 3.446782] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.449753] Console: switching to colour frame buffer device 90x25
> > [ 3.449760] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 3.449765] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 3.449768] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 3.455199] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> > [ 3.456384] i915 0000:00:02.0: registered panic notifier
> > [ 3.457613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 3.459287] parport_pc 00:07: reported by Plug and Play ACPI
> > [ 3.460641] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> > [ 3.560558] lp0: using parport0 (interrupt-driven).
> > [ 3.564759] loop: module loaded
> > [ 3.566136] ACPI Warning: 0x00004028-0x0000402f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
> > [ 3.568770] ACPI: This conflict may cause random problems and system instability
> > [ 3.570118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.572842] ACPI Warning: 0x000040b0-0x000040bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
> > [ 3.575761] ACPI: This conflict may cause random problems and system instability
> > [ 3.577297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.580449] ACPI Warning: 0x00004080-0x000040af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
> > [ 3.583752] ACPI: This conflict may cause random problems and system instability
> > [ 3.585482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.589035] Uniform Multi-Platform E-IDE driver
> > [ 3.590849] ide-gd driver 1.18
> > [ 3.592566] ide-cd driver 5.00
> > [ 3.594437] sata_sil24 0000:04:00.0: version 1.1
> > [ 3.595856] scsi0 : sata_sil24
> > [ 3.597881] scsi1 : sata_sil24
> > [ 3.599576] ata1: SATA max UDMA/100 host m128@0xd5184000 port 0xd5180000 irq 19
> > [ 3.601314] ata2: SATA max UDMA/100 host m128@0xd5184000 port 0xd5182000 irq 19
> > [ 3.603328] ata_piix 0000:00:1f.2: version 2.13
> > [ 3.603623] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> > [ 3.606198] scsi2 : ata_piix
> > [ 3.607871] scsi3 : ata_piix
> > [ 3.609448] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
> > [ 3.610913] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
> > [ 3.612450] sky2: driver version 1.30
> > [ 3.614005] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
> > [ 3.615426] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
> > [ 3.615990] sky2 0000:02:00.0 eth0: addr 00:01:80:62:25:4b
> > [ 3.617863] sky2 0000:03:00.0: Yukon-2 EC chip revision 1
> > [ 3.619183] sky2 0000:03:00.0: irq 45 for MSI/MSI-X
> > [ 3.619513] sky2 0000:03:00.0 eth1: addr 00:01:80:62:25:4c
> > [ 3.620830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 3.622055] ehci-pci: EHCI PCI platform driver
> > [ 3.623683] ehci-pci 0000:00:1d.7: EHCI Host Controller
> > [ 3.625075] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
> > [ 3.630227] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
> > [ 3.630292] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd5444000
> > [ 3.640021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> > [ 3.641536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> > [ 3.642578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.643620] usb usb1: Product: EHCI Host Controller
> > [ 3.644663] usb usb1: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 ehci_hcd
> > [ 3.645769] usb usb1: SerialNumber: 0000:00:1d.7
> > [ 3.647888] hub 1-0:1.0: USB hub found
> > [ 3.649147] hub 1-0:1.0: 8 ports detected
> > [ 3.651481] uhci_hcd: USB Universal Host Controller Interface driver
> > [ 3.653001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > [ 3.654178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> > [ 3.655367] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
> > [ 3.656724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.657917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.659136] usb usb2: Product: UHCI Host Controller
> > [ 3.660335] usb usb2: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.661564] usb usb2: SerialNumber: 0000:00:1d.0
> > [ 3.663098] hub 2-0:1.0: USB hub found
> > [ 3.664378] hub 2-0:1.0: 2 ports detected
> > [ 3.666229] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > [ 3.667440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> > [ 3.668729] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
> > [ 3.670060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.671288] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.672540] usb usb3: Product: UHCI Host Controller
> > [ 3.673782] usb usb3: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.675044] usb usb3: SerialNumber: 0000:00:1d.1
> > [ 3.676608] hub 3-0:1.0: USB hub found
> > [ 3.677842] hub 3-0:1.0: 2 ports detected
> > [ 3.679658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > [ 3.680864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> > [ 3.682124] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
> > [ 3.683491] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.684736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.685978] usb usb4: Product: UHCI Host Controller
> > [ 3.687201] usb usb4: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.688460] usb usb4: SerialNumber: 0000:00:1d.2
> > [ 3.689990] hub 4-0:1.0: USB hub found
> > [ 3.691218] hub 4-0:1.0: 2 ports detected
> > [ 3.693001] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > [ 3.694192] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> > [ 3.695424] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
> > [ 3.696739] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> > [ 3.697965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > [ 3.699207] usb usb5: Product: UHCI Host Controller
> > [ 3.700441] usb usb5: Manufacturer: Linux 3.13.0-main-01064-gd978ef1 uhci_hcd
> > [ 3.701705] usb usb5: SerialNumber: 0000:00:1d.3
> > [ 3.703233] hub 5-0:1.0: USB hub found
> > [ 3.704490] hub 5-0:1.0: 2 ports detected
> > [ 3.706034] usbcore: registered new interface driver usblp
> > [ 3.707276] usbcore: registered new interface driver usb-storage
> > [ 3.708533] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> > [ 3.709709] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> > [ 3.713047] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 3.714994] mousedev: PS/2 mouse device common for all mice
> > [ 3.717248] input: PC Speaker as /devices/platform/pcspkr/input/input3
> > [ 3.718730] rtc_cmos 00:02: RTC can wake from S4
> > [ 3.720549] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> > [ 3.721854] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
> > [ 3.723487] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> > [ 3.724891] w83627hf: w83627hf: Found W83627THF chip at 0x290
> > [ 3.726201] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \SEN1 1 (20131115/utaddress-251)
> > [ 3.729640] ACPI: This conflict may cause random problems and system instability
> > [ 3.731040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > [ 3.734295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> > [ 3.735750] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x4060)
> > [ 3.737604] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> > [ 3.739060] device-mapper: uevent: version 1.0.3
> > [ 3.740715] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
> > [ 3.743911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> > [ 3.747832] hidraw: raw HID events driver (C) Jiri Kosina
> > [ 3.750358] usbcore: registered new interface driver usbhid
> > [ 3.751951] usbhid: USB HID core driver
> > [ 3.753692] TCP: cubic registered
> > [ 3.755210] Initializing XFRM netlink socket
> > [ 3.757156] Using IPI Shortcut mode
> > [ 3.758914] registered taskstats version 1
> > [ 3.760845] AppArmor: AppArmor sha1 policy hashing enabled
> > [ 3.763285] rtc_cmos 00:02: setting system clock to 2014-04-22 13:43:01 UTC (1398174181)
> > [ 3.767393] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
> > [ 3.769169] PM: Checking hibernation image partition /dev/sda3
> > [ 3.776285] tsc: Marking TSC unstable due to cpufreq changes
> > [ 3.780763] ata4.00: ATAPI: AOpen DVRW2412PRO, 1.64, max UDMA/33
> > [ 3.800255] ata4.00: configured for UDMA/33
> > [ 3.804440] ata3.00: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
> > [ 3.807721] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> > [ 3.811214] ata3.01: ATA-7: HDT722525DLA380, V44OA91A, max UDMA/133
> > [ 3.814472] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> > [ 3.832368] ata3.00: configured for UDMA/133
> > [ 3.849099] ata3.01: configured for UDMA/133
> > [ 3.960127] usb 1-2: new high-speed USB device number 2 using ehci-pci
> > [ 4.103316] usb 1-2: New USB device found, idVendor=04b8, idProduct=011b
> > [ 4.106371] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 4.109373] usb 1-2: Product: EPSON Scanner
> > [ 4.111499] usb 1-2: Manufacturer: EPSON
> > [ 4.224106] usb 1-3: new high-speed USB device number 3 using ehci-pci
> > [ 4.356693] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
> > [ 4.359538] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> > [ 4.362453] usb 1-3: Product: USB 2.0 Hub
> > [ 4.366019] hub 1-3:1.0: USB hub found
> > [ 4.369046] hub 1-3:1.0: 4 ports detected
> > [ 4.868063] usb 5-2: new full-speed USB device number 2 using uhci_hcd
> > [ 5.055696] usb 5-2: New USB device found, idVendor=046d, idProduct=c52b
> > [ 5.058754] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > [ 5.061636] usb 5-2: Product: USB Receiver
> > [ 5.064371] usb 5-2: Manufacturer: Logitech
> > [ 5.077307] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
> > [ 5.082613] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
> > [ 5.092226] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
> > [ 5.096306] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
> > [ 5.106935] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input2
> > [ 5.308198] usb 1-3.4: new full-speed USB device number 5 using ehci-pci
> > [ 5.405819] usb 1-3.4: New USB device found, idVendor=03f0, idProduct=1d17
> > [ 5.409341] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > [ 5.412910] usb 1-3.4: Product: hp LaserJet 1320 series
> > [ 5.416462] usb 1-3.4: Manufacturer: Hewlett-Packard
> > [ 5.417994] usb 1-3.4: SerialNumber: 00CNHW646GZH
> > [ 5.421067] usblp 1-3.4:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
> > [ 5.800070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> > [ 5.805665] ata1.00: ATA-8: KINGSTON SKC100S3120G, 501ABBF0, max UDMA/133
> > [ 5.809390] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
> > [ 5.815601] ata1.00: configured for UDMA/100
> > [ 5.834084] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC100S 501A PQ: 0 ANSI: 5
> > [ 5.843662] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
> > [ 5.848453] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 5.850657] sd 0:0:0:0: [sda] Write Protect is off
> > [ 5.852791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 5.852845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 5.857891] sda: sda1 sda2 sda3
> > [ 5.860857] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 7.932067] ata2: SATA link down (SStatus 0 SControl 0)
> > [ 7.948446] scsi 2:0:0:0: Direct-Access ATA Hitachi HUA72201 JP4O PQ: 0 ANSI: 5
> > [ 7.955565] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> > [ 7.959313] sd 2:0:0:0: Attached scsi generic sg1 type 0
> > [ 7.962840] sd 2:0:0:0: [sdb] Write Protect is off
> > [ 7.966273] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > [ 7.966355] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 7.969460] scsi 2:0:1:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
> > [ 7.972841] sd 2:0:1:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
> > [ 7.974488] sd 2:0:1:0: [sdc] Write Protect is off
> > [ 7.975996] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
> > [ 7.976292] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > [ 7.979883] sd 2:0:1:0: Attached scsi generic sg2 type 0
> > [ 7.982786] sdb: sdb1 sdb2 sdb3 sdb4
> > [ 7.984492] scsi 3:0:0:0: CD-ROM AOPEN DVRW2412PRO 1.64 PQ: 0 ANSI: 5
> > [ 7.988948] sd 2:0:0:0: [sdb] Attached SCSI disk
> > [ 7.991247] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> > [ 7.992779] cdrom: Uniform CD-ROM driver Revision: 3.20
> > [ 7.994996] sr 3:0:0:0: Attached scsi CD-ROM sr0
> > [ 7.995175] sr 3:0:0:0: Attached scsi generic sg3 type 5
> > [ 8.058214] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 >
> > [ 8.064585] sd 2:0:1:0: [sdc] Attached SCSI disk
> > [ 8.067998] PM: Hibernation image partition 8:3 present
> > [ 8.068035] PM: Looking for hibernation image.
> > [ 8.071701] PM: Image not found (code -22)
> > [ 8.071711] PM: Hibernation image not present or could not be loaded.
> > [ 8.072512] Freeing unused kernel memory: 500K (c07f9000 - c0876000)
> > [ 8.074558] Write protecting the kernel text: 4488k
> > [ 8.076665] Write protecting the kernel read-only data: 2256k
> > [ 8.078335] NX-protecting the kernel data: 4728k
> > [ 8.196506] systemd-udevd[90]: starting version 208
> > [ 8.817893] random: nonblocking pool is initialized
> > [ 9.587815] platform microcode: Direct firmware load failed with error -2
> > [ 9.591670] platform microcode: Falling back to user helper
> > [ 13.472325] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
> > [ 13.476038] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 13.476045] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 13.476049] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 13.476054] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 13.476395] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 13.476399] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 13.476403] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 13.476478] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
> > [ 14.778136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> > [ 14.826261] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
> > [ 15.029583] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
> > [ 15.118801] NET: Registered protocol family 10
> > [ 15.124315] systemd[1]: Inserted module 'ipv6'
> > [ 15.126644] systemd[1]: Set hostname to <golem>.
> > [ 15.183033] LVM: Logical Volume autoactivation enabled.
> > [ 15.185303] LVM: Activation generator successfully completed.
> > [ 15.311540] systemd[1]: Starting Remote File Systems (Pre).
> > [ 15.316221] systemd[1]: Reached target Remote File Systems (Pre).
> > [ 15.317953] systemd[1]: Starting Remote File Systems.
> > [ 15.321672] systemd[1]: Reached target Remote File Systems.
> > [ 15.323419] systemd[1]: Starting Syslog Socket.
> > [ 15.327122] systemd[1]: Listening on Syslog Socket.
> > [ 15.328820] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
> > [ 15.331851] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
> > [ 15.333287] systemd[1]: Starting Delayed Shutdown Socket.
> > [ 15.336210] systemd[1]: Listening on Delayed Shutdown Socket.
> > [ 15.337533] systemd[1]: Starting LVM2 metadata daemon socket.
> > [ 15.340369] systemd[1]: Listening on LVM2 metadata daemon socket.
> > [ 15.341702] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
> > [ 15.343342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> > [ 15.344736] systemd[1]: Starting Paths.
> > [ 15.347608] systemd[1]: Reached target Paths.
> > [ 15.349096] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
> > [ 15.354344] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> > [ 15.357277] systemd[1]: Starting Encrypted Volumes.
> > [ 15.360435] systemd[1]: Reached target Encrypted Volumes.
> > [ 15.361957] systemd[1]: Starting Journal Socket.
> > [ 15.365335] systemd[1]: Listening on Journal Socket.
> > [ 15.366865] systemd[1]: Mounting POSIX Message Queue File System...
> > [ 15.375572] systemd[1]: Starting Load Kernel Modules...
> > [ 15.382417] systemd[1]: Starting Create list of required static device nodes for the current kernel...
> > [ 15.402740] systemd[1]: Started Set Up Additional Binary Formats.
> > [ 15.405020] systemd[1]: Starting Setup Virtual Console...
> > [ 15.413643] systemd[1]: Starting Create dynamic rule for /dev/root link...
> > [ 15.424935] systemd[1]: Starting LSB: Set default boot entry if called...
> > [ 15.432288] systemd[1]: Starting Journal Service...
> > [ 15.463472] systemd[1]: Started Journal Service.
> > [ 15.498137] systemd-journald[202]: Vacuuming done, freed 0 bytes
> > [ 15.569620] [drm:intel_crtc_set_config], [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
> > [ 15.569627] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
> > [ 15.569631] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:DVI-D-1] to [CRTC:3]
> > [ 15.621781] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
> > [ 15.909733] systemd-udevd[241]: starting version 208
> > [ 16.379683] Linux video capture interface: v2.00
> > [ 16.521180] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
> > [ 16.542699] WARNING! power/level is deprecated; use power/control instead
> > [ 16.733638] Adding 7119316k swap on /dev/sda3. Priority:-1 extents:1 across:7119316k SS
> > [ 17.074286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
> > [ 17.139216] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=3 (0x14/0x17/0x16/0x0/0x0) type:line
> > [ 17.139224] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> > [ 17.139229] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
> > [ 17.139233] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
> > [ 17.139237] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0
> > [ 17.139240] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
> > [ 17.139244] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
> > [ 17.139248] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x1b
> > [ 17.139252] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
> > [ 17.139257] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
> > [ 17.139261] ALSA sound/pci/hda/patch_realtek.c:572 realtek: Enable default setup for auto mode as fallback
> > [ 17.162783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
> > [ 17.222696] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > [ 17.236290] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > [ 17.255391] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> > [ 17.261287] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> > [ 17.274087] tveeprom 8-0050: Hauppauge model 69100, rev B4C3, serial# 7900937
> > [ 17.292122] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> > [ 17.303670] tveeprom 8-0050: MAC address is 00:0d:fe:78:8f:09
> > [ 17.315320] tveeprom 8-0050: tuner model is Conexant CX24118A (idx 123, type 4)
> > [ 17.321311] tveeprom 8-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> > [ 17.329373] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> > [ 17.335654] tveeprom 8-0050: audio processor is None (idx 0)
> > [ 17.347089] tveeprom 8-0050: decoder processor is CX880 (idx 20)
> > [ 17.357408] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
> > [ 17.367460] cx88[0]: hauppauge eeprom: model=69100
> > [ 17.416091] Registered IR keymap rc-hauppauge
> > [ 17.418847] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0/input13
> > [ 17.431663] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:05.2/rc/rc0
> > [ 17.449327] IR RC5(x) protocol handler initialized
> > [ 17.454480] cx88[0]/2: cx2388x 8802 Driver Manager
> > [ 17.457159] cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 17, latency: 32, mmio: 0xd2000000
> > [ 17.461726] lirc_dev: IR Remote Control driver registered, major 250
> > [ 17.466631] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
> > [ 17.472116] IR LIRC bridge handler initialized
> > [ 17.482251] cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 17, latency: 32, mmio: 0xd0000000
> > [ 17.487398] cx88[0]/0: registered device video0 [v4l2]
> > [ 17.497932] cx88[0]/0: registered device vbi0
> > [ 17.509908] cx88/2: cx2388x dvb driver version 0.0.9 loaded
> > [ 17.511501] cx88/2: registering cx8802 driver, type: dvb access: shared
> > [ 17.514289] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
> > [ 17.521114] cx88[0]/2: cx2388x based DVB/ATSC card
> > [ 17.524146] cx8802_alloc_frontends() allocating 1 frontend(s)
> > [ 17.552650] DVB: registering new adapter (cx88[0])
> > [ 17.554415] cx88-mpeg driver manager 0000:05:05.2: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
> > [ 17.767120] REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
> > [ 17.769248] REISERFS (device sdb4): using ordered data mode
> > [ 17.770792] reiserfs: using flush barriers
> > [ 17.782609] REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
> > [ 17.787278] REISERFS (device sdb4): checking transaction log (sdb4)
> > [ 17.892494] REISERFS (device sdb4): Using r5 hash to sort names
> > [ 17.917237] usblp0: removed
> > [ 18.063161] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> > [ 18.112358] systemd-journald[202]: Received request to flush runtime journal from PID 1
> > [ 18.898204] ip6_tables: (C) 2000-2006 Netfilter Core Team
> > [ 19.019782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > [ 19.048657] ip_tables: (C) 2000-2006 Netfilter Core Team
> > [ 21.004540] sky2 0000:02:00.0 eth0: enabling interface
> > [ 21.004816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [ 21.171576] NET: Registered protocol family 17
> > [ 22.799130] sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
> > [ 22.799313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > [ 23.488060] [drm:intel_crt_detect], [CONNECTOR:5:VGA-1] force=0
> > [ 23.492456] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
> > [ 23.492470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 23.492479] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
> > [ 23.492489] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
> > [ 23.492967] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
> > [ 23.492978] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
> > [ 23.492986] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
> > [ 23.493001] [drm:intel_tv_detect], [CONNECTOR:9:SVIDEO-1] force=0
>
On Tue, Apr 22, 2014 at 07:22:40PM +0300, Imre Deak wrote:
> On Tue, 2014-04-22 at 18:10 +0300, Jani Nikula wrote:
> > Knut, thanks for a quick bisect.
> >
> > Imre, please have a look at the sdvo WARN related to sysfs links in the
> > dmesg.
>
> It's probably the same WARN fixed by:
> http://patchwork.freedesktop.org/patch/24126/
Knut, can you please check that this patch gets rid of the WARN?
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
If the inherited BIOS framebuffer is smaller than the mode selected for
fbdev, then if we continue to use it then we cause display corruption as
we do not setup the panel fitter to upscale.
Regression from commit d978ef14456a38034f6c0e94a794129501f89200
Author: Jesse Barnes <[email protected]>
Date: Fri Mar 7 08:57:51 2014 -0800
drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
Reported-by: Knut Petersen <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
Signed-off-by: Chris Wilson <[email protected]>
Cc: Jesse Barnes <[email protected]>
---
drivers/gpu/drm/i915/intel_fbdev.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index b16116db6c37..28220ca838df 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -133,6 +133,12 @@ static int intelfb_create(struct drm_fb_helper *helper,
mutex_lock(&dev->struct_mutex);
+ if (intel_fb &&
+ (sizes->fb_width > intel_fb->base.width ||
+ sizes->fb_height > intel_fb->base.height)) {
+ drm_framebuffer_reference(&ifbdev->fb->base);
+ intel_fb = ifbdev->fb = NULL;
+ }
if (!intel_fb || WARN_ON(!intel_fb->obj)) {
DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
ret = intelfb_alloc(helper, sizes);
--
1.9.2
On Tue, Apr 22, 2014 at 10:05:58PM +0100, Chris Wilson wrote:
> If the inherited BIOS framebuffer is smaller than the mode selected for
> fbdev, then if we continue to use it then we cause display corruption as
> we do not setup the panel fitter to upscale.
>
> Regression from commit d978ef14456a38034f6c0e94a794129501f89200
> Author: Jesse Barnes <[email protected]>
> Date: Fri Mar 7 08:57:51 2014 -0800
>
> drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
>
> Reported-by: Knut Petersen <[email protected]>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
> Signed-off-by: Chris Wilson <[email protected]>
> Cc: Jesse Barnes <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_fbdev.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index b16116db6c37..28220ca838df 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -133,6 +133,12 @@ static int intelfb_create(struct drm_fb_helper *helper,
>
> mutex_lock(&dev->struct_mutex);
>
> + if (intel_fb &&
> + (sizes->fb_width > intel_fb->base.width ||
> + sizes->fb_height > intel_fb->base.height)) {
> + drm_framebuffer_reference(&ifbdev->fb->base);
> + intel_fb = ifbdev->fb = NULL;
Hm, maybe add a
DRM_DEBUG_KMS("BIOS fb to small, releasing it\n");
here. With or without this is
Reviewed-by: Daniel Vetter <[email protected]>
> + }
> if (!intel_fb || WARN_ON(!intel_fb->obj)) {
> DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
> ret = intelfb_alloc(helper, sizes);
> --
> 1.9.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
If the inherited BIOS framebuffer is smaller than the mode selected for
fbdev, then if we continue to use it then we cause display corruption as
we do not setup the panel fitter to upscale.
Regression from commit d978ef14456a38034f6c0e94a794129501f89200
Author: Jesse Barnes <[email protected]>
Date: Fri Mar 7 08:57:51 2014 -0800
drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
v2: Add a debug message to track the discard of the BIOS fb.
Reported-by: Knut Petersen <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
Signed-off-by: Chris Wilson <[email protected]>
Cc: Jesse Barnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
---
drivers/gpu/drm/i915/intel_fbdev.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index b16116db6c37..dbd3f7ce6354 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -133,6 +133,16 @@ static int intelfb_create(struct drm_fb_helper *helper,
mutex_lock(&dev->struct_mutex);
+ if (intel_fb &&
+ (sizes->fb_width > intel_fb->base.width ||
+ sizes->fb_height > intel_fb->base.height)) {
+ DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
+ " releasing it\n",
+ intel_fb->base.width, intel_fb->base.height,
+ sizes->fb_width, sizes->fb_height);
+ drm_framebuffer_reference(&ifbdev->fb->base);
+ intel_fb = ifbdev->fb = NULL;
+ }
if (!intel_fb || WARN_ON(!intel_fb->obj)) {
DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
ret = intelfb_alloc(helper, sizes);
--
1.9.2
On Tue, Apr 22, 2014 at 10:05:58PM +0100, Chris Wilson wrote:
> If the inherited BIOS framebuffer is smaller than the mode selected for
> fbdev, then if we continue to use it then we cause display corruption as
> we do not setup the panel fitter to upscale.
>
> Regression from commit d978ef14456a38034f6c0e94a794129501f89200
> Author: Jesse Barnes <[email protected]>
> Date: Fri Mar 7 08:57:51 2014 -0800
>
> drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
>
> Reported-by: Knut Petersen <[email protected]>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
> Signed-off-by: Chris Wilson <[email protected]>
> Cc: Jesse Barnes <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_fbdev.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index b16116db6c37..28220ca838df 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -133,6 +133,12 @@ static int intelfb_create(struct drm_fb_helper *helper,
>
> mutex_lock(&dev->struct_mutex);
>
> + if (intel_fb &&
> + (sizes->fb_width > intel_fb->base.width ||
> + sizes->fb_height > intel_fb->base.height)) {
> + drm_framebuffer_reference(&ifbdev->fb->base);
unreference
I know intel_fb == ifbdev->fb, but still I think it would look a bit
less confusing if you passed &intel_fb->base to
drm_framebuffer_unreference() instead of &ifbdev->fb->base. Simply
because you use intel_fb->base in the size checks just before.
> + intel_fb = ifbdev->fb = NULL;
> + }
> if (!intel_fb || WARN_ON(!intel_fb->obj)) {
> DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
> ret = intelfb_alloc(helper, sizes);
> --
> 1.9.2
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrj?l?
Intel OTC
If the inherited BIOS framebuffer is smaller than the mode selected for
fbdev, then if we continue to use it then we cause display corruption as
we do not setup the panel fitter to upscale.
Regression from commit d978ef14456a38034f6c0e94a794129501f89200
Author: Jesse Barnes <[email protected]>
Date: Fri Mar 7 08:57:51 2014 -0800
drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
v2: Add a debug message to track the discard of the BIOS fb.
v3: Ville pointed out the difference between ref/unref
Reported-by: Knut Petersen <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
Signed-off-by: Chris Wilson <[email protected]>
Cc: Jesse Barnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
---
drivers/gpu/drm/i915/intel_fbdev.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index b16116db6c37..fbe7941f88c8 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -133,6 +133,16 @@ static int intelfb_create(struct drm_fb_helper *helper,
mutex_lock(&dev->struct_mutex);
+ if (intel_fb &&
+ (sizes->fb_width > intel_fb->base.width ||
+ sizes->fb_height > intel_fb->base.height)) {
+ DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
+ " releasing it\n",
+ intel_fb->base.width, intel_fb->base.height,
+ sizes->fb_width, sizes->fb_height);
+ drm_framebuffer_unreference(&intel_fb->base);
+ intel_fb = ifbdev->fb = NULL;
+ }
if (!intel_fb || WARN_ON(!intel_fb->obj)) {
DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
ret = intelfb_alloc(helper, sizes);
--
1.9.2
On Wed, Apr 23, 2014 at 08:54:31AM +0100, Chris Wilson wrote:
> If the inherited BIOS framebuffer is smaller than the mode selected for
> fbdev, then if we continue to use it then we cause display corruption as
> we do not setup the panel fitter to upscale.
>
> Regression from commit d978ef14456a38034f6c0e94a794129501f89200
> Author: Jesse Barnes <[email protected]>
> Date: Fri Mar 7 08:57:51 2014 -0800
>
> drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
>
> v2: Add a debug message to track the discard of the BIOS fb.
> v3: Ville pointed out the difference between ref/unref
>
> Reported-by: Knut Petersen <[email protected]>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
> Signed-off-by: Chris Wilson <[email protected]>
> Cc: Jesse Barnes <[email protected]>
> Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Ville Syrj?l? <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_fbdev.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index b16116db6c37..fbe7941f88c8 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -133,6 +133,16 @@ static int intelfb_create(struct drm_fb_helper *helper,
>
> mutex_lock(&dev->struct_mutex);
>
> + if (intel_fb &&
> + (sizes->fb_width > intel_fb->base.width ||
> + sizes->fb_height > intel_fb->base.height)) {
> + DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
> + " releasing it\n",
> + intel_fb->base.width, intel_fb->base.height,
> + sizes->fb_width, sizes->fb_height);
> + drm_framebuffer_unreference(&intel_fb->base);
> + intel_fb = ifbdev->fb = NULL;
> + }
> if (!intel_fb || WARN_ON(!intel_fb->obj)) {
> DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
> ret = intelfb_alloc(helper, sizes);
> --
> 1.9.2
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrj?l?
Intel OTC
On Wed, 23 Apr 2014, Ville Syrjälä <[email protected]> wrote:
> On Wed, Apr 23, 2014 at 08:54:31AM +0100, Chris Wilson wrote:
>> If the inherited BIOS framebuffer is smaller than the mode selected for
>> fbdev, then if we continue to use it then we cause display corruption as
>> we do not setup the panel fitter to upscale.
>>
>> Regression from commit d978ef14456a38034f6c0e94a794129501f89200
>> Author: Jesse Barnes <[email protected]>
>> Date: Fri Mar 7 08:57:51 2014 -0800
>>
>> drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v12
>>
>> v2: Add a debug message to track the discard of the BIOS fb.
>> v3: Ville pointed out the difference between ref/unref
>>
>> Reported-by: Knut Petersen <[email protected]>
>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77767
>> Signed-off-by: Chris Wilson <[email protected]>
>> Cc: Jesse Barnes <[email protected]>
>> Reviewed-by: Daniel Vetter <[email protected]>
>
> Reviewed-by: Ville Syrjälä <[email protected]>
Pushed to -fixes, thanks for the patch and review.
BR,
Jani.
>
>> ---
>> drivers/gpu/drm/i915/intel_fbdev.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
>> index b16116db6c37..fbe7941f88c8 100644
>> --- a/drivers/gpu/drm/i915/intel_fbdev.c
>> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
>> @@ -133,6 +133,16 @@ static int intelfb_create(struct drm_fb_helper *helper,
>>
>> mutex_lock(&dev->struct_mutex);
>>
>> + if (intel_fb &&
>> + (sizes->fb_width > intel_fb->base.width ||
>> + sizes->fb_height > intel_fb->base.height)) {
>> + DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
>> + " releasing it\n",
>> + intel_fb->base.width, intel_fb->base.height,
>> + sizes->fb_width, sizes->fb_height);
>> + drm_framebuffer_unreference(&intel_fb->base);
>> + intel_fb = ifbdev->fb = NULL;
>> + }
>> if (!intel_fb || WARN_ON(!intel_fb->obj)) {
>> DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
>> ret = intelfb_alloc(helper, sizes);
>> --
>> 1.9.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> [email protected]
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center