This commit add check for return value of init_ring_common() in the
init_render_ring(). Now, when failure is detected the error code is
propagated to the caller layer instead of being ignored.
I believe that this fix will have a positive impact on the oops that
I hit recently and which starts when init_ring_common() fails:
[drm:init_ring_common] *ERROR* render ring initialization failed
ctl 0001f001 head 0000000c tail 00000000 start 003eb000
BUG: unable to handle kernel NULL pointer dereference at 0000006c
IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
Signed-off-by: Konrad Zapalowicz <[email protected]>
---
drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 279488a..d205b0d 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs *ring)
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = init_ring_common(ring);
+ if (ret)
+ return ret;
/* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
--
1.8.1.2
On Thu, Jun 19, 2014 at 12:38 AM, Konrad Zapalowicz
<[email protected]> wrote:
> This commit add check for return value of init_ring_common() in the
> init_render_ring(). Now, when failure is detected the error code is
> propagated to the caller layer instead of being ignored.
>
> I believe that this fix will have a positive impact on the oops that
> I hit recently and which starts when init_ring_common() fails:
>
> [drm:init_ring_common] *ERROR* render ring initialization failed
> ctl 0001f001 head 0000000c tail 00000000 start 003eb000
> BUG: unable to handle kernel NULL pointer dereference at 0000006c
> IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
>
> Signed-off-by: Konrad Zapalowicz <[email protected]>
Do you have the full Oops somewhere?
> ---
> drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index 279488a..d205b0d 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs *ring)
> struct drm_device *dev = ring->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> int ret = init_ring_common(ring);
> + if (ret)
> + return ret;
Yeah, on gen5+ this looks needed.
-Daniel
>
> /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
> if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
> --
> 1.8.1.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
On 06/19, Daniel Vetter wrote:
> On Thu, Jun 19, 2014 at 12:38 AM, Konrad Zapalowicz
> <[email protected]> wrote:
> > This commit add check for return value of init_ring_common() in the
> > init_render_ring(). Now, when failure is detected the error code is
> > propagated to the caller layer instead of being ignored.
> >
> > I believe that this fix will have a positive impact on the oops that
> > I hit recently and which starts when init_ring_common() fails:
> >
> > [drm:init_ring_common] *ERROR* render ring initialization failed
> > ctl 0001f001 head 0000000c tail 00000000 start 003eb000
> > BUG: unable to handle kernel NULL pointer dereference at 0000006c
> > IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
> >
> > Signed-off-by: Konrad Zapalowicz <[email protected]>
>
> Do you have the full Oops somewhere?
Here you go, the Oops plus some usefull data:
1. Oops
2. lspci -vv
3. uname -a
4. Oops analysis
1. The Oops:
Jun 17 21:06:11 t400 kernel: [ 12.136049] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 0000000c tail 00000000 start 003eb000
Jun 17 21:06:11 t400 kernel: [ 12.136081] BUG: unable to handle kernel NULL pointer dereference at 0000006c
Jun 17 21:06:11 t400 kernel: [ 12.136086] IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136118] *pdpt = 0000000033158001 *pde = 0000000000000000
Jun 17 21:06:11 t400 kernel: [ 12.136123] Oops: 0000 [#1] SMP
Jun 17 21:06:11 t400 kernel: [ 12.136127] Modules linked in: mac80211(E) i915(E+) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_controller(E) intel_gtt(E) snd_hda_codec(E) iwlwifi(E) i2c_algo_bit(E) snd_hwdep(E) uvcvideo(E) thinkpad_acpi(E) drm_kms_helper(E) snd_pcm(E) pcmcia(E) nvram(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_core(E) drm(E) psmouse(E) videodev(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) cfg80211(E) yenta_socket(E) snd_timer(E) pcmcia_rsrc(E) serio_raw(E) snd_seq_device(E) pcmcia_core(E) snd(E) pl2303(E) lpc_ich(E) ppdev(E) usb_storage(E) soundcore(E) usbserial(E) wmi(E) video(E) tpm_tis(E) parport_pc(E) lp(E) parport(E) firewire_ohci(E) firewire_core(E) crc_itu_t(E) ahci(E) libahci(E) e1000e(E) ptp(E) pps_core(E)
Jun 17 21:06:11 t400 kernel: [ 12.136187] CPU: 1 PID: 570 Comm: modprobe Tainted: G E 3.15.0 #6
Jun 17 21:06:11 t400 kernel: [ 12.136191] Hardware name: LENOVO 6475FA4/6475FA4, BIOS 7UET79WW (3.09 ) 10/13/2009
Jun 17 21:06:11 t400 kernel: [ 12.136195] task: f3141b60 ti: f316a000 task.ti: f316a000
Jun 17 21:06:11 t400 kernel: [ 12.136199] EIP: 0060:[<f8ca1679>] EFLAGS: 00010282 CPU: 1
Jun 17 21:06:11 t400 kernel: [ 12.136223] EIP is at i915_gem_obj_to_ggtt+0x9/0x40 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136227] EAX: 00000000 EBX: 00000004 ECX: f2e6c000 EDX: fffffffb
Jun 17 21:06:11 t400 kernel: [ 12.136230] ESI: f2e6d174 EDI: 00000000 EBP: f316bb50 ESP: f316bb4c
Jun 17 21:06:11 t400 kernel: [ 12.136234] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Jun 17 21:06:11 t400 kernel: [ 12.136239] CR0: 8005003b CR2: 0000006c CR3: 33157000 CR4: 000407f0
Jun 17 21:06:11 t400 kernel: [ 12.136243] Stack:
Jun 17 21:06:11 t400 kernel: [ 12.136245] 00000004 f316bb68 f8ca16c5 f316bb80 00000004 f2e6d174 f2e794c0 f316bb80
Jun 17 21:06:11 t400 kernel: [ 12.136254] f8c9473e f2e6c000 f2e6c000 f32e5800 fffffffb f316bba0 f8c9ea49 00000000
Jun 17 21:06:11 t400 kernel: [ 12.136263] 00000000 f32e5838 f32e5800 00000000 f2e6c000 f316bca4 f8cf63a4 f8cf3c70
Jun 17 21:06:11 t400 kernel: [ 12.136271] Call Trace:
Jun 17 21:06:11 t400 kernel: [ 12.136297] [<f8ca16c5>] i915_gem_object_ggtt_unpin+0x15/0x90 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136323] [<f8c9473e>] i915_gem_context_fini+0x7e/0x130 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136349] [<f8c9ea49>] i915_gem_init+0x69/0x1a0 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136381] [<f8cf63a4>] i915_driver_load+0xa54/0xe50 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136411] [<f8cf3c70>] ? i915_dma_init+0x2e0/0x2e0 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136419] [<c12ed1da>] ? kobject_uevent_env+0xfa/0x510
Jun 17 21:06:11 t400 kernel: [ 12.136424] [<c12ed1da>] ? kobject_uevent_env+0xfa/0x510
Jun 17 21:06:11 t400 kernel: [ 12.136429] [<c12ed050>] ? add_uevent_var+0xd0/0xd0
Jun 17 21:06:11 t400 kernel: [ 12.136435] [<c13d11b4>] ? get_device+0x14/0x30
Jun 17 21:06:11 t400 kernel: [ 12.136440] [<c13d5a92>] ? klist_class_dev_get+0x12/0x20
Jun 17 21:06:11 t400 kernel: [ 12.136447] [<c15f34c5>] ? klist_node_init+0x35/0x50
Jun 17 21:06:11 t400 kernel: [ 12.136452] [<c15f35a0>] ? klist_add_tail+0x20/0x50
Jun 17 21:06:11 t400 kernel: [ 12.136457] [<c13d1204>] ? put_device+0x14/0x20
Jun 17 21:06:11 t400 kernel: [ 12.136462] [<c13d27d7>] ? device_add+0x167/0x530
Jun 17 21:06:11 t400 kernel: [ 12.136468] [<c12ec522>] ? kobject_set_name_vargs+0x42/0x60
Jun 17 21:06:11 t400 kernel: [ 12.136485] [<f89ed12e>] drm_dev_register+0x9e/0xf0 [drm]
Jun 17 21:06:11 t400 kernel: [ 12.136499] [<f89eee2f>] drm_get_pci_dev+0x6f/0x1e0 [drm]
Jun 17 21:06:11 t400 kernel: [ 12.136521] [<f8c7f325>] i915_pci_probe+0x35/0x60 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136528] [<c131f489>] pci_device_probe+0x79/0xc0
Jun 17 21:06:11 t400 kernel: [ 12.136534] [<c11c3cd5>] ? sysfs_create_link+0x25/0x40
Jun 17 21:06:11 t400 kernel: [ 12.136540] [<c13d4f04>] driver_probe_device+0x64/0x200
Jun 17 21:06:11 t400 kernel: [ 12.136545] [<c131f3ce>] ? pci_match_device+0x9e/0xb0
Jun 17 21:06:11 t400 kernel: [ 12.136550] [<c13d5131>] __driver_attach+0x91/0xa0
Jun 17 21:06:11 t400 kernel: [ 12.136555] [<c13d50a0>] ? driver_probe_device+0x200/0x200
Jun 17 21:06:11 t400 kernel: [ 12.136559] [<c13d3752>] bus_for_each_dev+0x42/0x80
Jun 17 21:06:11 t400 kernel: [ 12.136564] [<c13d4a8e>] driver_attach+0x1e/0x20
Jun 17 21:06:11 t400 kernel: [ 12.136569] [<c13d50a0>] ? driver_probe_device+0x200/0x200
Jun 17 21:06:11 t400 kernel: [ 12.136575] [<c13d4714>] bus_add_driver+0xd4/0x1d0
Jun 17 21:06:11 t400 kernel: [ 12.136580] [<c13d5719>] driver_register+0x59/0xe0
Jun 17 21:06:11 t400 kernel: [ 12.136585] [<c131e8d3>] __pci_register_driver+0x33/0x40
Jun 17 21:06:11 t400 kernel: [ 12.136590] [<f8b7c000>] ? 0xf8b7bfff
Jun 17 21:06:11 t400 kernel: [ 12.136603] [<f89ef08d>] drm_pci_init+0xed/0x110 [drm]
Jun 17 21:06:11 t400 kernel: [ 12.136609] [<f8b7c000>] ? 0xf8b7bfff
Jun 17 21:06:11 t400 kernel: [ 12.136630] [<f8b7c062>] i915_init+0x62/0x64 [i915]
Jun 17 21:06:11 t400 kernel: [ 12.136636] [<c100048a>] do_one_initcall+0xda/0x120
Jun 17 21:06:11 t400 kernel: [ 12.136641] [<f8b7c000>] ? 0xf8b7bfff
Jun 17 21:06:11 t400 kernel: [ 12.136646] [<c103652f>] ? set_memory_nx+0x5f/0x70
Jun 17 21:06:11 t400 kernel: [ 12.136653] [<c15f7fbb>] ? set_section_ro_nx+0x54/0x59
Jun 17 21:06:11 t400 kernel: [ 12.136659] [<c10ae4bb>] load_module+0x1adb/0x21b0
Jun 17 21:06:11 t400 kernel: [ 12.136667] [<c160475a>] ? error_code+0x5a/0x60
Jun 17 21:06:11 t400 kernel: [ 12.136672] [<c10aec13>] SyS_init_module+0x83/0xb0
Jun 17 21:06:11 t400 kernel: [ 12.136680] [<c160b84c>] sysenter_do_call+0x12/0x22
Jun 17 21:06:11 t400 kernel: [ 12.136684] Code: f8 e8 ec de 39 c8 e9 36 ff ff ff 66 ba 6d 09 b8 e0 8c d0 f8 e8 d9 de 39 c8 e9 ff fe ff ff 8d 74 26 00 55 89 e5 53 66 66 66 66 90 <8b> 50 6c 8d 48 6c 39 ca 74 1a 8b 40 08 8d 4a cc 8b 58 1c 31 c0
Jun 17 21:06:11 t400 kernel: [ 12.136725] EIP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915] SS:ESP 0068:f316bb4c
Jun 17 21:06:11 t400 kernel: [ 12.136752] CR2: 000000000000006c
Jun 17 21:06:11 t400 kernel: [ 12.136757] ---[ end trace 3fff41670168a98f ]---
2. lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc326800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02 [16550])
Subsystem: Lenovo Device 20ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1830 [size=8]
Region 1: Memory at fc324000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fc100000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc325000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc326c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at fc320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4300000-f43fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fc0fffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc327000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00005000-00008fff
Memory behind bridge: f4800000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 20f8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fc326000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc327400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Device 1011
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 11)
Subsystem: Intel Corporation Device 4443
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=1K]
Region 2: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at c0600000 [disabled] [size=64K]
Capabilities: <access denied>
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Lenovo Device 20c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: c4000000-c7ffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Device 20c7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
3. uname
Linux t400 3.15.0 #6 SMP Sat Jun 14 21:07:35 CEST 2014 i686 i686 i686 GNU/Linux
4. Oops analysis
I have spent some time tracing down the source of the Oops. It turned
out that the failure is caused in list_empty() function which is used
by the i915_gem_obj_to_ggtt() function. The decoded code shows:
Code starting with the faulting instruction
===========================================
0: 8b 50 6c mov 0x6c(%eax),%edx <--- trapping
3: 8d 48 6c lea 0x6c(%eax),%ecx
6: 39 ca cmp %ecx,%edx
8: 74 1a je 0x24
a: 8b 40 08 mov 0x8(%eax),%eax
d: 8d 4a cc lea -0x34(%edx),%ecx
10: 8b 58 1c mov 0x1c(%eax),%ebx
13: 31 c0 xor %eax,%eax
Now the 0x6c offset corresponds to the vma_list member of struct
drm_i915_gem_object.
(gdb) print &((struct drm_i915_gem_object *)0)->vma_list
$1 = (struct list_head *) 0x6c <i915_free_hws+92>
So the Oops is because the vma_list has not been initialized. I
suspect, although not 100% sure, that the ringbuffer error has
something to do with it.
/Konrad
> > ---
> > drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > index 279488a..d205b0d 100644
> > --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> > +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> > @@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs *ring)
> > struct drm_device *dev = ring->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > int ret = init_ring_common(ring);
> > + if (ret)
> > + return ret;
>
> Yeah, on gen5+ this looks needed.
> -Daniel
>
> >
> > /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
> > if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
> > --
> > 1.8.1.2
> >
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Hm, that's a bit unexpected. You are on a gen4 device, which means
we'll return the right error in the same function after a few more
register writes. But those are harmless.
On gen5+ we do more (call the pipe_control setup code), which could
potentially clobber the error code. So your patch looks correct, but
it definitely won't fix anything for your machine. You can respin the
patch with an improved commit message if you want.
The actual bug we seem to have is blowing up on the ggtt_unpin in
context_fini. Which is doubly-impossible: Gen4 doesn't have hw
contexts, so should have dctx->obj == NULL. And ring init failures
fail earlier so shouldn't even hit the context_fini code below the
cleanup_gem: label in driver_load. Seriously confused here.
-Daniel
On Thu, Jun 19, 2014 at 2:45 PM, Konrad Zapalowicz
<[email protected]> wrote:
> On 06/19, Daniel Vetter wrote:
>> On Thu, Jun 19, 2014 at 12:38 AM, Konrad Zapalowicz
>> <[email protected]> wrote:
>> > This commit add check for return value of init_ring_common() in the
>> > init_render_ring(). Now, when failure is detected the error code is
>> > propagated to the caller layer instead of being ignored.
>> >
>> > I believe that this fix will have a positive impact on the oops that
>> > I hit recently and which starts when init_ring_common() fails:
>> >
>> > [drm:init_ring_common] *ERROR* render ring initialization failed
>> > ctl 0001f001 head 0000000c tail 00000000 start 003eb000
>> > BUG: unable to handle kernel NULL pointer dereference at 0000006c
>> > IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
>> >
>> > Signed-off-by: Konrad Zapalowicz <[email protected]>
>>
>> Do you have the full Oops somewhere?
>
> Here you go, the Oops plus some usefull data:
> 1. Oops
> 2. lspci -vv
> 3. uname -a
> 4. Oops analysis
>
> 1. The Oops:
>
> Jun 17 21:06:11 t400 kernel: [ 12.136049] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 0000000c tail 00000000 start 003eb000
> Jun 17 21:06:11 t400 kernel: [ 12.136081] BUG: unable to handle kernel NULL pointer dereference at 0000006c
> Jun 17 21:06:11 t400 kernel: [ 12.136086] IP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136118] *pdpt = 0000000033158001 *pde = 0000000000000000
> Jun 17 21:06:11 t400 kernel: [ 12.136123] Oops: 0000 [#1] SMP
> Jun 17 21:06:11 t400 kernel: [ 12.136127] Modules linked in: mac80211(E) i915(E+) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_controller(E) intel_gtt(E) snd_hda_codec(E) iwlwifi(E) i2c_algo_bit(E) snd_hwdep(E) uvcvideo(E) thinkpad_acpi(E) drm_kms_helper(E) snd_pcm(E) pcmcia(E) nvram(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_core(E) drm(E) psmouse(E) videodev(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) cfg80211(E) yenta_socket(E) snd_timer(E) pcmcia_rsrc(E) serio_raw(E) snd_seq_device(E) pcmcia_core(E) snd(E) pl2303(E) lpc_ich(E) ppdev(E) usb_storage(E) soundcore(E) usbserial(E) wmi(E) video(E) tpm_tis(E) parport_pc(E) lp(E) parport(E) firewire_ohci(E) firewire_core(E) crc_itu_t(E) ahci(E) libahci(E) e1000e(E) ptp(E) pps_core(E)
> Jun 17 21:06:11 t400 kernel: [ 12.136187] CPU: 1 PID: 570 Comm: modprobe Tainted: G E 3.15.0 #6
> Jun 17 21:06:11 t400 kernel: [ 12.136191] Hardware name: LENOVO 6475FA4/6475FA4, BIOS 7UET79WW (3.09 ) 10/13/2009
> Jun 17 21:06:11 t400 kernel: [ 12.136195] task: f3141b60 ti: f316a000 task.ti: f316a000
> Jun 17 21:06:11 t400 kernel: [ 12.136199] EIP: 0060:[<f8ca1679>] EFLAGS: 00010282 CPU: 1
> Jun 17 21:06:11 t400 kernel: [ 12.136223] EIP is at i915_gem_obj_to_ggtt+0x9/0x40 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136227] EAX: 00000000 EBX: 00000004 ECX: f2e6c000 EDX: fffffffb
> Jun 17 21:06:11 t400 kernel: [ 12.136230] ESI: f2e6d174 EDI: 00000000 EBP: f316bb50 ESP: f316bb4c
> Jun 17 21:06:11 t400 kernel: [ 12.136234] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> Jun 17 21:06:11 t400 kernel: [ 12.136239] CR0: 8005003b CR2: 0000006c CR3: 33157000 CR4: 000407f0
> Jun 17 21:06:11 t400 kernel: [ 12.136243] Stack:
> Jun 17 21:06:11 t400 kernel: [ 12.136245] 00000004 f316bb68 f8ca16c5 f316bb80 00000004 f2e6d174 f2e794c0 f316bb80
> Jun 17 21:06:11 t400 kernel: [ 12.136254] f8c9473e f2e6c000 f2e6c000 f32e5800 fffffffb f316bba0 f8c9ea49 00000000
> Jun 17 21:06:11 t400 kernel: [ 12.136263] 00000000 f32e5838 f32e5800 00000000 f2e6c000 f316bca4 f8cf63a4 f8cf3c70
> Jun 17 21:06:11 t400 kernel: [ 12.136271] Call Trace:
> Jun 17 21:06:11 t400 kernel: [ 12.136297] [<f8ca16c5>] i915_gem_object_ggtt_unpin+0x15/0x90 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136323] [<f8c9473e>] i915_gem_context_fini+0x7e/0x130 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136349] [<f8c9ea49>] i915_gem_init+0x69/0x1a0 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136381] [<f8cf63a4>] i915_driver_load+0xa54/0xe50 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136411] [<f8cf3c70>] ? i915_dma_init+0x2e0/0x2e0 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136419] [<c12ed1da>] ? kobject_uevent_env+0xfa/0x510
> Jun 17 21:06:11 t400 kernel: [ 12.136424] [<c12ed1da>] ? kobject_uevent_env+0xfa/0x510
> Jun 17 21:06:11 t400 kernel: [ 12.136429] [<c12ed050>] ? add_uevent_var+0xd0/0xd0
> Jun 17 21:06:11 t400 kernel: [ 12.136435] [<c13d11b4>] ? get_device+0x14/0x30
> Jun 17 21:06:11 t400 kernel: [ 12.136440] [<c13d5a92>] ? klist_class_dev_get+0x12/0x20
> Jun 17 21:06:11 t400 kernel: [ 12.136447] [<c15f34c5>] ? klist_node_init+0x35/0x50
> Jun 17 21:06:11 t400 kernel: [ 12.136452] [<c15f35a0>] ? klist_add_tail+0x20/0x50
> Jun 17 21:06:11 t400 kernel: [ 12.136457] [<c13d1204>] ? put_device+0x14/0x20
> Jun 17 21:06:11 t400 kernel: [ 12.136462] [<c13d27d7>] ? device_add+0x167/0x530
> Jun 17 21:06:11 t400 kernel: [ 12.136468] [<c12ec522>] ? kobject_set_name_vargs+0x42/0x60
> Jun 17 21:06:11 t400 kernel: [ 12.136485] [<f89ed12e>] drm_dev_register+0x9e/0xf0 [drm]
> Jun 17 21:06:11 t400 kernel: [ 12.136499] [<f89eee2f>] drm_get_pci_dev+0x6f/0x1e0 [drm]
> Jun 17 21:06:11 t400 kernel: [ 12.136521] [<f8c7f325>] i915_pci_probe+0x35/0x60 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136528] [<c131f489>] pci_device_probe+0x79/0xc0
> Jun 17 21:06:11 t400 kernel: [ 12.136534] [<c11c3cd5>] ? sysfs_create_link+0x25/0x40
> Jun 17 21:06:11 t400 kernel: [ 12.136540] [<c13d4f04>] driver_probe_device+0x64/0x200
> Jun 17 21:06:11 t400 kernel: [ 12.136545] [<c131f3ce>] ? pci_match_device+0x9e/0xb0
> Jun 17 21:06:11 t400 kernel: [ 12.136550] [<c13d5131>] __driver_attach+0x91/0xa0
> Jun 17 21:06:11 t400 kernel: [ 12.136555] [<c13d50a0>] ? driver_probe_device+0x200/0x200
> Jun 17 21:06:11 t400 kernel: [ 12.136559] [<c13d3752>] bus_for_each_dev+0x42/0x80
> Jun 17 21:06:11 t400 kernel: [ 12.136564] [<c13d4a8e>] driver_attach+0x1e/0x20
> Jun 17 21:06:11 t400 kernel: [ 12.136569] [<c13d50a0>] ? driver_probe_device+0x200/0x200
> Jun 17 21:06:11 t400 kernel: [ 12.136575] [<c13d4714>] bus_add_driver+0xd4/0x1d0
> Jun 17 21:06:11 t400 kernel: [ 12.136580] [<c13d5719>] driver_register+0x59/0xe0
> Jun 17 21:06:11 t400 kernel: [ 12.136585] [<c131e8d3>] __pci_register_driver+0x33/0x40
> Jun 17 21:06:11 t400 kernel: [ 12.136590] [<f8b7c000>] ? 0xf8b7bfff
> Jun 17 21:06:11 t400 kernel: [ 12.136603] [<f89ef08d>] drm_pci_init+0xed/0x110 [drm]
> Jun 17 21:06:11 t400 kernel: [ 12.136609] [<f8b7c000>] ? 0xf8b7bfff
> Jun 17 21:06:11 t400 kernel: [ 12.136630] [<f8b7c062>] i915_init+0x62/0x64 [i915]
> Jun 17 21:06:11 t400 kernel: [ 12.136636] [<c100048a>] do_one_initcall+0xda/0x120
> Jun 17 21:06:11 t400 kernel: [ 12.136641] [<f8b7c000>] ? 0xf8b7bfff
> Jun 17 21:06:11 t400 kernel: [ 12.136646] [<c103652f>] ? set_memory_nx+0x5f/0x70
> Jun 17 21:06:11 t400 kernel: [ 12.136653] [<c15f7fbb>] ? set_section_ro_nx+0x54/0x59
> Jun 17 21:06:11 t400 kernel: [ 12.136659] [<c10ae4bb>] load_module+0x1adb/0x21b0
> Jun 17 21:06:11 t400 kernel: [ 12.136667] [<c160475a>] ? error_code+0x5a/0x60
> Jun 17 21:06:11 t400 kernel: [ 12.136672] [<c10aec13>] SyS_init_module+0x83/0xb0
> Jun 17 21:06:11 t400 kernel: [ 12.136680] [<c160b84c>] sysenter_do_call+0x12/0x22
> Jun 17 21:06:11 t400 kernel: [ 12.136684] Code: f8 e8 ec de 39 c8 e9 36 ff ff ff 66 ba 6d 09 b8 e0 8c d0 f8 e8 d9 de 39 c8 e9 ff fe ff ff 8d 74 26 00 55 89 e5 53 66 66 66 66 90 <8b> 50 6c 8d 48 6c 39 ca 74 1a 8b 40 08 8d 4a cc 8b 58 1c 31 c0
> Jun 17 21:06:11 t400 kernel: [ 12.136725] EIP: [<f8ca1679>] i915_gem_obj_to_ggtt+0x9/0x40 [i915] SS:ESP 0068:f316bb4c
> Jun 17 21:06:11 t400 kernel: [ 12.136752] CR2: 000000000000006c
> Jun 17 21:06:11 t400 kernel: [ 12.136757] ---[ end trace 3fff41670168a98f ]---
>
> 2. lspci -vv
>
> 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
> Subsystem: Lenovo Device 20e0
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
> Subsystem: Lenovo Device 20e4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 49
> Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at 1800 [size=8]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: <access denied>
> Kernel driver in use: i915
>
> 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
> Subsystem: Lenovo Device 20e4
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: <access denied>
>
> 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
> Subsystem: Lenovo Device 20e6
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fc326800 (64-bit, non-prefetchable) [size=16]
> Capabilities: <access denied>
>
> 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02 [16550])
> Subsystem: Lenovo Device 20ec
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at 1830 [size=8]
> Region 1: Memory at fc324000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: serial
>
> 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
> Subsystem: Lenovo Device 20ee
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 48
> Region 0: Memory at fc100000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at fc325000 (32-bit, non-prefetchable) [size=4K]
> Region 2: I/O ports at 1840 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: e1000e
>
> 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 20f0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 20
> Region 4: I/O ports at 1860 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 20f0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at 1880 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 20f0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 22
> Region 4: I/O ports at 18a0 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
> Subsystem: Lenovo Device 20f1
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at fc326c00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci-pci
>
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
> Subsystem: Lenovo Device 20f2
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 45
> Region 0: Memory at fc320000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: snd_hda_intel
>
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: c0000000-c01fffff
> Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: f4300000-f43fffff
> Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: fc000000-fc0fffff
> Prefetchable memory behind bridge: 00000000c0600000-00000000c08fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: f8000000-f9ffffff
> Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: fa000000-fbffffff
> Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 20f0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at 18c0 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 20f0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at 18e0 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 20f0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at 1c00 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
> Subsystem: Lenovo Device 20f1
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 19
> Region 0: Memory at fc327000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci-pci
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
> I/O behind bridge: 00005000-00008fff
> Memory behind bridge: f4800000-f7ffffff
> Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
> Subsystem: Lenovo Device 20f5
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel driver in use: lpc_ich
>
> 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
> Subsystem: Lenovo Device 20f8
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 46
> Region 0: I/O ports at 1c48 [size=8]
> Region 1: I/O ports at 183c [size=4]
> Region 2: I/O ports at 1c40 [size=8]
> Region 3: I/O ports at 1838 [size=4]
> Region 4: I/O ports at 1c20 [size=32]
> Region 5: Memory at fc326000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
>
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
> Subsystem: Lenovo Device 20f9
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fc327400 (64-bit, non-prefetchable) [size=256]
> Region 4: I/O ports at 1c60 [size=32]
>
> 03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
> Subsystem: Intel Corporation Device 1011
> Physical Slot: 1
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 47
> Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: iwlwifi
>
> 04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 11)
> Subsystem: Intel Corporation Device 4443
> Physical Slot: 2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=1K]
> Region 2: I/O ports at 2000 [size=256]
> [virtual] Expansion ROM at c0600000 [disabled] [size=64K]
> Capabilities: <access denied>
>
> 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
> Subsystem: Lenovo Device 20c6
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 168, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
> Memory window 0: f0000000-f3ffffff (prefetchable)
> Memory window 1: c4000000-c7ffffff
> I/O window 0: 00005000-000050ff
> I/O window 1: 00005400-000054ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
>
> 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])
> Subsystem: Lenovo Device 20c7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: firewire_ohci
>
> 3. uname
>
> Linux t400 3.15.0 #6 SMP Sat Jun 14 21:07:35 CEST 2014 i686 i686 i686 GNU/Linux
>
> 4. Oops analysis
>
> I have spent some time tracing down the source of the Oops. It turned
> out that the failure is caused in list_empty() function which is used
> by the i915_gem_obj_to_ggtt() function. The decoded code shows:
>
> Code starting with the faulting instruction
> ===========================================
> 0: 8b 50 6c mov 0x6c(%eax),%edx <--- trapping
> 3: 8d 48 6c lea 0x6c(%eax),%ecx
> 6: 39 ca cmp %ecx,%edx
> 8: 74 1a je 0x24
> a: 8b 40 08 mov 0x8(%eax),%eax
> d: 8d 4a cc lea -0x34(%edx),%ecx
> 10: 8b 58 1c mov 0x1c(%eax),%ebx
> 13: 31 c0 xor %eax,%eax
>
> Now the 0x6c offset corresponds to the vma_list member of struct
> drm_i915_gem_object.
>
> (gdb) print &((struct drm_i915_gem_object *)0)->vma_list
> $1 = (struct list_head *) 0x6c <i915_free_hws+92>
>
> So the Oops is because the vma_list has not been initialized. I
> suspect, although not 100% sure, that the ringbuffer error has
> something to do with it.
>
> /Konrad
>
>> > ---
>> > drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
>> > 1 file changed, 2 insertions(+)
>> >
>> > diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
>> > index 279488a..d205b0d 100644
>> > --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
>> > +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
>> > @@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs *ring)
>> > struct drm_device *dev = ring->dev;
>> > struct drm_i915_private *dev_priv = dev->dev_private;
>> > int ret = init_ring_common(ring);
>> > + if (ret)
>> > + return ret;
>>
>> Yeah, on gen5+ this looks needed.
>> -Daniel
>>
>> >
>> > /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
>> > if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
>> > --
>> > 1.8.1.2
>> >
>>
>>
>>
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
On Thu, Jun 19, 2014 at 4:35 PM, Daniel Vetter <[email protected]> wrote:
> The actual bug we seem to have is blowing up on the ggtt_unpin in
> context_fini. Which is doubly-impossible: Gen4 doesn't have hw
> contexts, so should have dctx->obj == NULL. And ring init failures
> fail earlier so shouldn't even hit the context_fini code below the
> cleanup_gem: label in driver_load. Seriously confused here.
Also please retest with latest upstream, we've made the ring init
failure non-letal for the driver. That should help you, too.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
On 06/19, Daniel Vetter wrote:
> On Thu, Jun 19, 2014 at 4:35 PM, Daniel Vetter <[email protected]> wrote:
> > The actual bug we seem to have is blowing up on the ggtt_unpin in
> > context_fini. Which is doubly-impossible: Gen4 doesn't have hw
> > contexts, so should have dctx->obj == NULL. And ring init failures
> > fail earlier so shouldn't even hit the context_fini code below the
> > cleanup_gem: label in driver_load. Seriously confused here.
>
> Also please retest with latest upstream, we've made the ring init
> failure non-letal for the driver. That should help you, too.
> -Daniel
Thanks for comments and I will resubmit the patch, still it is better
to have it.
/Konrad
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
This commit add check for return value of init_ring_common() in the
init_render_ring(). Now, when failure is detected the error code is
propagated to the caller instead of being ignored.
Signed-off-by: Konrad Zapalowicz <[email protected]>
---
v2:
- remove from commit message references to the Oops.
drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 279488a..d205b0d 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs *ring)
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = init_ring_common(ring);
+ if (ret)
+ return ret;
/* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
--
1.8.1.2
On Thu, Jun 19, 2014 at 07:07:15PM +0200, Konrad Zapalowicz wrote:
> This commit add check for return value of init_ring_common() in the
> init_render_ring(). Now, when failure is detected the error code is
> propagated to the caller instead of being ignored.
>
> Signed-off-by: Konrad Zapalowicz <[email protected]>
Queued for -next, thanks for the patch.
-Daniel
> ---
>
> v2:
> - remove from commit message references to the Oops.
>
> drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index 279488a..d205b0d 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -604,6 +604,8 @@ static int init_render_ring(struct intel_engine_cs *ring)
> struct drm_device *dev = ring->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> int ret = init_ring_common(ring);
> + if (ret)
> + return ret;
>
> /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */
> if (INTEL_INFO(dev)->gen >= 4 && INTEL_INFO(dev)->gen < 7)
> --
> 1.8.1.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch