On CPM2, the SPI parameter RAM is dynamically allocated in the
dualport RAM whereas in CPM1, it is statically allocated to a default
address with capability to relocate it somewhere else via the use of
CPM micropatch. The address of the parameter RAM is given by the boot
loader and expected to be mapped via of_iomap()
In the current implementation, in function fsl_spi_cpm_get_pram()
there is a confusion between the SPI_BASE register and the base of the
SPI parameter RAM. Fortunatly, it is working properly with MPC866 and
MPC885 because they do set SPI_BASE, but on MPC860 and other old
MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set.
Also, the parameter RAM is not properly mapped with of_iomap() as it
should but still gets accessible by chance through the full RAM which
is mapped from somewhere else.
This patch applies to the SPI driver the same principle as for the
CPM UART: when the CPM is of type CPM1, we simply do an of_iomap() of
the area provided via the device tree.
Signed-off-by: Christophe Leroy <[email protected]>
---
v2: Use devm_ioremap_resource() instead of_iomap()
drivers/spi/spi-fsl-cpm.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
index e85ab1c..4e5c945 100644
--- a/drivers/spi/spi-fsl-cpm.c
+++ b/drivers/spi/spi-fsl-cpm.c
@@ -23,6 +23,7 @@
#include <linux/of_address.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
+#include <linux/platform_device.h>
#include "spi-fsl-cpm.h"
#include "spi-fsl-lib.h"
@@ -264,17 +265,6 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
if (mspi->flags & SPI_CPM2) {
pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
out_be16(spi_base, pram_ofs);
- } else {
- struct spi_pram __iomem *pram = spi_base;
- u16 rpbase = in_be16(&pram->rpbase);
-
- /* Microcode relocation patch applied? */
- if (rpbase) {
- pram_ofs = rpbase;
- } else {
- pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
- out_be16(spi_base, pram_ofs);
- }
}
iounmap(spi_base);
@@ -287,7 +277,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
struct device_node *np = dev->of_node;
const u32 *iprop;
int size;
- unsigned long pram_ofs;
unsigned long bds_ofs;
if (!(mspi->flags & SPI_CPM_MODE))
@@ -314,8 +303,21 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
}
}
- pram_ofs = fsl_spi_cpm_get_pram(mspi);
- if (IS_ERR_VALUE(pram_ofs)) {
+ if (mspi->flags & SPI_CPM1) {
+ struct resource *res;
+
+ res = platform_get_resource(to_platform_device(dev),
+ IORESOURCE_MEM, 1);
+ mspi->pram = devm_ioremap_resource(dev, res);
+ } else {
+ unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi);
+
+ if (IS_ERR_VALUE(pram_ofs))
+ mspi->pram = NULL;
+ else
+ mspi->pram = cpm_muram_addr(pram_ofs);
+ }
+ if (mspi->pram == NULL) {
dev_err(dev, "can't allocate spi parameter ram\n");
goto err_pram;
}
@@ -341,8 +343,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
goto err_dummy_rx;
}
- mspi->pram = cpm_muram_addr(pram_ofs);
-
mspi->tx_bd = cpm_muram_addr(bds_ofs);
mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd));
@@ -370,7 +370,8 @@ err_dummy_rx:
err_dummy_tx:
cpm_muram_free(bds_ofs);
err_bds:
- cpm_muram_free(pram_ofs);
+ if (!(mspi->flags & SPI_CPM1))
+ cpm_muram_free(cpm_muram_offset(mspi->pram));
err_pram:
fsl_spi_free_dummy_rx();
return -ENOMEM;
--
2.1.0
Hi Christophe,
On Wed, Apr 22, 2015 at 4:17 PM, Christophe Leroy
<[email protected]> wrote:
> On CPM2, the SPI parameter RAM is dynamically allocated in the
> dualport RAM whereas in CPM1, it is statically allocated to a default
> address with capability to relocate it somewhere else via the use of
> CPM micropatch. The address of the parameter RAM is given by the boot
> loader and expected to be mapped via of_iomap()
>
> In the current implementation, in function fsl_spi_cpm_get_pram()
> there is a confusion between the SPI_BASE register and the base of the
> SPI parameter RAM. Fortunatly, it is working properly with MPC866 and
> MPC885 because they do set SPI_BASE, but on MPC860 and other old
> MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set.
> Also, the parameter RAM is not properly mapped with of_iomap() as it
> should but still gets accessible by chance through the full RAM which
> is mapped from somewhere else.
>
> This patch applies to the SPI driver the same principle as for the
> CPM UART: when the CPM is of type CPM1, we simply do an of_iomap() of
> the area provided via the device tree.
>
> Signed-off-by: Christophe Leroy <[email protected]>
>
> ---
> v2: Use devm_ioremap_resource() instead of_iomap()
Your subject and commitlog still talk about using of_iomap(), you need
to update them too.
Regards
Jonas
Hi (again),
as usual you only see issues *after* sending the email ...
On Wed, Apr 22, 2015 at 4:17 PM, Christophe Leroy
<[email protected]> wrote:
> On CPM2, the SPI parameter RAM is dynamically allocated in the
> dualport RAM whereas in CPM1, it is statically allocated to a default
> address with capability to relocate it somewhere else via the use of
> CPM micropatch. The address of the parameter RAM is given by the boot
> loader and expected to be mapped via of_iomap()
>
> In the current implementation, in function fsl_spi_cpm_get_pram()
> there is a confusion between the SPI_BASE register and the base of the
> SPI parameter RAM. Fortunatly, it is working properly with MPC866 and
> MPC885 because they do set SPI_BASE, but on MPC860 and other old
> MPC8xx that doesn't set SPI_BASE, pram_ofs is not properly set.
> Also, the parameter RAM is not properly mapped with of_iomap() as it
> should but still gets accessible by chance through the full RAM which
> is mapped from somewhere else.
>
> This patch applies to the SPI driver the same principle as for the
> CPM UART: when the CPM is of type CPM1, we simply do an of_iomap() of
> the area provided via the device tree.
>
> Signed-off-by: Christophe Leroy <[email protected]>
>
> ---
> v2: Use devm_ioremap_resource() instead of_iomap()
>
> drivers/spi/spi-fsl-cpm.c | 35 ++++++++++++++++++-----------------
> 1 file changed, 18 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
> index e85ab1c..4e5c945 100644
> --- a/drivers/spi/spi-fsl-cpm.c
> +++ b/drivers/spi/spi-fsl-cpm.c
> @@ -23,6 +23,7 @@
> #include <linux/of_address.h>
> #include <linux/spi/spi.h>
> #include <linux/types.h>
> +#include <linux/platform_device.h>
>
> #include "spi-fsl-cpm.h"
> #include "spi-fsl-lib.h"
> @@ -264,17 +265,6 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
> if (mspi->flags & SPI_CPM2) {
> pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
> out_be16(spi_base, pram_ofs);
> - } else {
> - struct spi_pram __iomem *pram = spi_base;
> - u16 rpbase = in_be16(&pram->rpbase);
> -
> - /* Microcode relocation patch applied? */
> - if (rpbase) {
> - pram_ofs = rpbase;
> - } else {
> - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
> - out_be16(spi_base, pram_ofs);
> - }
> }
>
> iounmap(spi_base);
> @@ -287,7 +277,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
> struct device_node *np = dev->of_node;
> const u32 *iprop;
> int size;
> - unsigned long pram_ofs;
> unsigned long bds_ofs;
>
> if (!(mspi->flags & SPI_CPM_MODE))
> @@ -314,8 +303,21 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
> }
> }
>
> - pram_ofs = fsl_spi_cpm_get_pram(mspi);
> - if (IS_ERR_VALUE(pram_ofs)) {
> + if (mspi->flags & SPI_CPM1) {
> + struct resource *res;
> +
> + res = platform_get_resource(to_platform_device(dev),
> + IORESOURCE_MEM, 1);
> + mspi->pram = devm_ioremap_resource(dev, res);
> + } else {
> + unsigned long pram_ofs = fsl_spi_cpm_get_pram(mspi);
> +
> + if (IS_ERR_VALUE(pram_ofs))
> + mspi->pram = NULL;
> + else
> + mspi->pram = cpm_muram_addr(pram_ofs);
> + }
> + if (mspi->pram == NULL) {
devm_ioremap_resource will never return NULL; you either need to check
with IS_ERR(), or do that after calling devm_ioremap_resource and setg
pram to NULL in that case.
> dev_err(dev, "can't allocate spi parameter ram\n");
> goto err_pram;
> }
> @@ -341,8 +343,6 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
> goto err_dummy_rx;
> }
>
> - mspi->pram = cpm_muram_addr(pram_ofs);
> -
> mspi->tx_bd = cpm_muram_addr(bds_ofs);
> mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd));
>
> @@ -370,7 +370,8 @@ err_dummy_rx:
> err_dummy_tx:
> cpm_muram_free(bds_ofs);
> err_bds:
> - cpm_muram_free(pram_ofs);
> + if (!(mspi->flags & SPI_CPM1))
> + cpm_muram_free(cpm_muram_offset(mspi->pram));
> err_pram:
> fsl_spi_free_dummy_rx();
> return -ENOMEM;
Regards
Jonas
On Wed, Apr 22, 2015 at 10:46 PM, Jonas Gorski <[email protected]> wrote:
>> ---
>> v2: Use devm_ioremap_resource() instead of_iomap()
>
> Your subject and commitlog still talk about using of_iomap(), you need
> to update them too.
Hmm I didn't see the V3. Ignore this comment (the other one still applies).
Regards
Jonas