Hi6220 is one mobile solution of Hisilicon, this patchset contains
initial support for Hi6220 SoC and HiKey development board, which
supports octal ARM Cortex A53 cores. Initial support is minimal and
includes just the arch configuration, clock driver, device tree
configuration.
PSCI is enabled in device tree and there is no problem to boot all the
octal cores, and the CPU hotplug is also working now, you can download
and compile the latest firmware based on the following link to run this
patch set:
https://github.com/96boards/documentation/wiki/UEFI
Changes v4:
* Rebase to kernel 4.1-rc1
* Delete "arm,cortex-a15-gic" from the gic node in dts
Changes v3:
* Verified the CPU hotplug based on the new released firmware
* Redefined the compatible strings of four system controllers in dts
* Setting COMMON_CLK_HI6220 to a bool symbol
* Keep CONFGI_ARCH_HISI sorted alphabetically
Changes v2:
* Split the DT bindings documents into earlier patches
* Change SMP enable method from spin-table to PSCI in device tree
* Remove "clock-frequency" from armv8-timer device node in device tree
* Add more description about Hisilicon designed system controllers
in DT bindings document
* Enable high speed clock on UART1 mux
* Other changes based on the discussion in the mailing list:
https://lkml.org/lkml/2015/2/5/147
Bintian Wang (5):
arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig
arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC
clk: hi6220: Document devicetree bindings for hi6220 clock
clk: hi6220: Clock driver support for Hisilicon hi6220 SoC
arm64: dts: Add dts files for Hisilicon Hi6220 SoC
.../bindings/arm/hisilicon/hisilicon.txt | 87 ++++++
.../devicetree/bindings/clock/hi6220-clock.txt | 34 +++
arch/arm64/Kconfig | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/hisilicon/Makefile | 5 +
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 31 +++
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 172 ++++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/clk/Kconfig | 2 +
drivers/clk/Makefile | 4 +-
drivers/clk/hisilicon/Kconfig | 6 +
drivers/clk/hisilicon/Makefile | 3 +-
drivers/clk/hisilicon/clk-hi6220.c | 292 +++++++++++++++++++++
drivers/clk/hisilicon/clk.c | 29 ++
drivers/clk/hisilicon/clk.h | 17 ++
drivers/clk/hisilicon/clkdivider-hi6220.c | 273 +++++++++++++++++++
include/dt-bindings/clock/hi6220-clock.h | 173 ++++++++++++
17 files changed, 1131 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt
create mode 100644 arch/arm64/boot/dts/hisilicon/Makefile
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi
create mode 100644 drivers/clk/hisilicon/Kconfig
create mode 100644 drivers/clk/hisilicon/clk-hi6220.c
create mode 100644 drivers/clk/hisilicon/clkdivider-hi6220.c
create mode 100644 include/dt-bindings/clock/hi6220-clock.h
--
1.9.1
This patch introduces ARCH_HISI to enable Hisilicon SoC family in
Kconfig and defconfig.
Signed-off-by: Bintian Wang <[email protected]>
Reviewed-by: Haojian Zhuang <[email protected]>
Reviewed-by: Wei Xu <[email protected]>
---
arch/arm64/Kconfig | 5 +++++
arch/arm64/configs/defconfig | 1 +
2 files changed, 6 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 4269dba..2af5efe 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -180,6 +180,11 @@ config ARCH_FSL_LS2085A
help
This enables support for Freescale LS2085A SOC.
+config ARCH_HISI
+ bool "Hisilicon SoC Family"
+ help
+ This enables support for Hisilicon ARMv8 SoC family
+
config ARCH_MEDIATEK
bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
select ARM_GIC
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 2ed7449..1d293ea 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -33,6 +33,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_EXYNOS7=y
CONFIG_ARCH_FSL_LS2085A=y
+CONFIG_ARCH_HISI=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_TEGRA=y
--
1.9.1
This patch adds documentation for the devicetree bindings used by the
DT files of Hisilicon hi6220 SoC mobile platform.
Signed-off-by: Bintian Wang <[email protected]>
---
.../bindings/arm/hisilicon/hisilicon.txt | 87 ++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 35b1bd4..f67d0f3 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -1,5 +1,8 @@
Hisilicon Platforms Device Tree Bindings
----------------------------------------------------
+Hi6220 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi6220";
Hi4511 Board
Required root node properties:
@@ -13,6 +16,9 @@ HiP01 ca9x2 Board
Required root node properties:
- compatible = "hisilicon,hip01-ca9x2";
+HiKey Board
+Required root node properties:
+ - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
Hisilicon system controller
@@ -41,6 +47,87 @@ Example:
};
-----------------------------------------------------------------------
+Hisilicon Hi6220 system controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sysctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+ under this controller and this property must be present.
+
+Hisilicon designs this controller as one of the system controllers,
+its main functions are the same as Hisilicon system controller, but
+the register offset of some core modules are different.
+
+Example:
+ /*for Hi6220*/
+ sys_ctrl: sys_ctrl {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+
+Hisilicon Hi6220 Power Always ON domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-aoctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+ under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the power always
+on domain for mobile platform.
+
+Example:
+ /*for Hi6220*/
+ ao_ctrl: ao_ctrl {
+ compatible = "hisilicon,hi6220-aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+
+Hisilicon Hi6220 Media domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-mediactrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+ under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the multimedia
+domain(e.g. codec, G3D ...) for mobile platform.
+
+Example:
+ /*for Hi6220*/
+ media_ctrl: media_ctrl {
+ compatible = "hisilicon,hi6220-mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+
+Hisilicon Hi6220 Power Management domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-pmctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, some clock registers are define
+ under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the power management
+domain for mobile platform.
+
+Example:
+ /*for Hi6220*/
+ pm_ctrl: pm_ctrl {
+ compatible = "hisilicon,hi6220-pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+-----------------------------------------------------------------------
Hisilicon HiP01 system controller
Required properties:
--
1.9.1
Document DT files bindings for Hisilicon hi6220 clock.
Signed-off-by: Bintian Wang <[email protected]>
Reviewed-by: Haojian Zhuang <[email protected]>
---
.../devicetree/bindings/clock/hi6220-clock.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
new file mode 100644
index 0000000..53ddb19
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -0,0 +1,34 @@
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+ indicate the clock controller functionality.
+
+ - "hisilicon,hi6220-aoctrl"
+ - "hisilicon,hi6220-sysctrl"
+ - "hisilicon,hi6220-mediactrl"
+ - "hisilicon,hi6220-pmctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+For example:
+ sys_ctrl: sys_ctrl {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.
--
1.9.1
Add clock drivers for hi6220 SoC, this driver controls the SoC
registers to supply different clocks to different IPs in the SoC.
We add one divider clock for hi6220 because the divider in hi6220
also has a mask bit but it doesnot obey the rule defined by flag
"CLK_DIVIDER_HIWORD_MASK", we can not get index of the mask bit by
left shift fixed bits (e.g. 16 bits), so we add this divider clock
to handle it.
Signed-off-by: Jorge Ramirez-Ortiz <[email protected]>
Signed-off-by: Bintian Wang <[email protected]>
Reviewed-by: Haojian Zhuang <[email protected]>
Reviewed-by: Zhangfei Gao <[email protected]>
---
drivers/clk/Kconfig | 2 +
drivers/clk/Makefile | 4 +-
drivers/clk/hisilicon/Kconfig | 6 +
drivers/clk/hisilicon/Makefile | 3 +-
drivers/clk/hisilicon/clk-hi6220.c | 292 ++++++++++++++++++++++++++++++
drivers/clk/hisilicon/clk.c | 29 +++
drivers/clk/hisilicon/clk.h | 17 ++
drivers/clk/hisilicon/clkdivider-hi6220.c | 273 ++++++++++++++++++++++++++++
include/dt-bindings/clock/hi6220-clock.h | 173 ++++++++++++++++++
9 files changed, 795 insertions(+), 4 deletions(-)
create mode 100644 drivers/clk/hisilicon/Kconfig
create mode 100644 drivers/clk/hisilicon/clk-hi6220.c
create mode 100644 drivers/clk/hisilicon/clkdivider-hi6220.c
create mode 100644 include/dt-bindings/clock/hi6220-clock.h
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 9897f35..935c44b 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -152,6 +152,8 @@ config COMMON_CLK_CDCE706
source "drivers/clk/qcom/Kconfig"
+source "drivers/clk/hisilicon/Kconfig"
+
endmenu
source "drivers/clk/bcm/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 3d00c25..9719954 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -47,9 +47,7 @@ obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
-obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
-obj-$(CONFIG_ARCH_HIP04) += hisilicon/
-obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
+obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
new file mode 100644
index 0000000..8034739
--- /dev/null
+++ b/drivers/clk/hisilicon/Kconfig
@@ -0,0 +1,6 @@
+config COMMON_CLK_HI6220
+ bool "Hi6220 Clock Driver"
+ depends on OF && ARCH_HISI
+ default y
+ help
+ Build the Hisilicon Hi6220 clock driver based on the common clock framework.
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
index 038c02f..48f0116 100644
--- a/drivers/clk/hisilicon/Makefile
+++ b/drivers/clk/hisilicon/Makefile
@@ -2,8 +2,9 @@
# Hisilicon Clock specific Makefile
#
-obj-y += clk.o clkgate-separated.o
+obj-y += clk.o clkgate-separated.o clkdivider-hi6220.o
obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
+obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o
diff --git a/drivers/clk/hisilicon/clk-hi6220.c b/drivers/clk/hisilicon/clk-hi6220.c
new file mode 100644
index 0000000..91b1cd7
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hi6220.c
@@ -0,0 +1,292 @@
+/*
+ * Hisilicon Hi6220 clock driver
+ *
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * Author: Bintian Wang <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <dt-bindings/clock/hi6220-clock.h>
+
+#include "clk.h"
+
+
+/* clocks in AO (always on) controller */
+static struct hisi_fixed_rate_clock hi6220_fixed_rate_clks[] __initdata = {
+ { HI6220_REF32K, "ref32k", NULL, CLK_IS_ROOT, 32764, },
+ { HI6220_CLK_TCXO, "clk_tcxo", NULL, CLK_IS_ROOT, 19200000, },
+ { HI6220_MMC1_PAD, "mmc1_pad", NULL, CLK_IS_ROOT, 100000000, },
+ { HI6220_MMC2_PAD, "mmc2_pad", NULL, CLK_IS_ROOT, 100000000, },
+ { HI6220_MMC0_PAD, "mmc0_pad", NULL, CLK_IS_ROOT, 200000000, },
+ { HI6220_PLL_BBP, "bbppll0", NULL, CLK_IS_ROOT, 245760000, },
+ { HI6220_PLL_GPU, "gpupll", NULL, CLK_IS_ROOT, 1000000000,},
+ { HI6220_PLL1_DDR, "ddrpll1", NULL, CLK_IS_ROOT, 1066000000,},
+ { HI6220_PLL_SYS, "syspll", NULL, CLK_IS_ROOT, 1200000000,},
+ { HI6220_PLL_SYS_MEDIA, "media_syspll", NULL, CLK_IS_ROOT, 1200000000,},
+ { HI6220_DDR_SRC, "ddr_sel_src", NULL, CLK_IS_ROOT, 1200000000,},
+ { HI6220_PLL_MEDIA, "media_pll", NULL, CLK_IS_ROOT, 1440000000,},
+ { HI6220_PLL_DDR, "ddrpll0", NULL, CLK_IS_ROOT, 1600000000,},
+};
+
+static struct hisi_fixed_factor_clock hi6220_fixed_factor_clks[] __initdata = {
+ { HI6220_300M, "clk_300m", "syspll", 1, 4, 0, },
+ { HI6220_150M, "clk_150m", "clk_300m", 1, 2, 0, },
+ { HI6220_PICOPHY_SRC, "picophy_src", "clk_150m", 1, 4, 0, },
+ { HI6220_MMC0_SRC_SEL, "mmc0srcsel", "mmc0_sel", 1, 8, 0, },
+ { HI6220_MMC1_SRC_SEL, "mmc1srcsel", "mmc1_sel", 1, 8, 0, },
+ { HI6220_MMC2_SRC_SEL, "mmc2srcsel", "mmc2_sel", 1, 8, 0, },
+ { HI6220_VPU_CODEC, "vpucodec", "codec_jpeg_aclk", 1, 2, 0, },
+ { HI6220_MMC0_SMP, "mmc0_sample", "mmc0_sel", 1, 8, 0, },
+ { HI6220_MMC1_SMP, "mmc1_sample", "mmc1_sel", 1, 8, 0, },
+ { HI6220_MMC2_SMP, "mmc2_sample", "mmc2_sel", 1, 8, 0, },
+};
+
+static struct hisi_gate_clock hi6220_separated_gate_clks_ao[] __initdata = {
+ { HI6220_WDT0_PCLK, "wdt0_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 12, 0, },
+ { HI6220_WDT1_PCLK, "wdt1_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 13, 0, },
+ { HI6220_WDT2_PCLK, "wdt2_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 14, 0, },
+ { HI6220_TIMER0_PCLK, "timer0_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 15, 0, },
+ { HI6220_TIMER1_PCLK, "timer1_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 16, 0, },
+ { HI6220_TIMER2_PCLK, "timer2_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 17, 0, },
+ { HI6220_TIMER3_PCLK, "timer3_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 18, 0, },
+ { HI6220_TIMER4_PCLK, "timer4_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 19, 0, },
+ { HI6220_TIMER5_PCLK, "timer5_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 20, 0, },
+ { HI6220_TIMER6_PCLK, "timer6_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 21, 0, },
+ { HI6220_TIMER7_PCLK, "timer7_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 22, 0, },
+ { HI6220_TIMER8_PCLK, "timer8_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 23, 0, },
+ { HI6220_UART0_PCLK, "uart0_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 24, 0, },
+};
+
+static struct hisi_clock_data *clk_data_ao;
+
+static void __init hi6220_clk_ao_init(struct device_node *np)
+{
+ clk_data_ao = hisi_clk_init(np, HI6220_AO_NR_CLKS);
+ if (!clk_data_ao)
+ return;
+
+ hisi_clk_register_fixed_rate(hi6220_fixed_rate_clks,
+ ARRAY_SIZE(hi6220_fixed_rate_clks), clk_data_ao);
+
+ hisi_clk_register_fixed_factor(hi6220_fixed_factor_clks,
+ ARRAY_SIZE(hi6220_fixed_factor_clks), clk_data_ao);
+
+ hisi_clk_register_gate_sep(hi6220_separated_gate_clks_ao,
+ ARRAY_SIZE(hi6220_separated_gate_clks_ao), clk_data_ao);
+}
+CLK_OF_DECLARE(hi6220_clk_ao, "hisilicon,hi6220-aoctrl", hi6220_clk_ao_init);
+
+
+/* clocks in sysctrl */
+static const char *mmc0_mux0_p[] __initconst = { "pll_ddr_gate", "syspll", };
+static const char *mmc0_mux1_p[] __initconst = { "mmc0_mux0", "pll_media_gate", };
+static const char *mmc0_src_p[] __initconst = { "mmc0srcsel", "mmc0_div", };
+static const char *mmc1_mux0_p[] __initconst = { "pll_ddr_gate", "syspll", };
+static const char *mmc1_mux1_p[] __initconst = { "mmc1_mux0", "pll_media_gate", };
+static const char *mmc1_src_p[] __initconst = { "mmc1srcsel", "mmc1_div", };
+static const char *mmc2_mux0_p[] __initconst = { "pll_ddr_gate", "syspll", };
+static const char *mmc2_mux1_p[] __initconst = { "mmc2_mux0", "pll_media_gate", };
+static const char *mmc2_src_p[] __initconst = { "mmc2srcsel", "mmc2_div", };
+static const char *mmc0_sample_in[] __initconst = { "mmc0_sample", "mmc0_pad", };
+static const char *mmc1_sample_in[] __initconst = { "mmc1_sample", "mmc1_pad", };
+static const char *mmc2_sample_in[] __initconst = { "mmc2_sample", "mmc2_pad", };
+static const char *uart1_src[] __initconst = { "clk_tcxo", "clk_150m", };
+static const char *uart2_src[] __initconst = { "clk_tcxo", "clk_150m", };
+static const char *uart3_src[] __initconst = { "clk_tcxo", "clk_150m", };
+static const char *uart4_src[] __initconst = { "clk_tcxo", "clk_150m", };
+static const char *hifi_src[] __initconst = { "syspll", "pll_media_gate", };
+
+static struct hisi_gate_clock hi6220_separated_gate_clks_sys[] __initdata = {
+ { HI6220_MMC0_CLK, "mmc0_clk", "mmc0_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 0, 0, },
+ { HI6220_MMC0_CIUCLK, "mmc0_ciuclk", "mmc0_smp_in", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 0, 0, },
+ { HI6220_MMC1_CLK, "mmc1_clk", "mmc1_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 1, 0, },
+ { HI6220_MMC1_CIUCLK, "mmc1_ciuclk", "mmc1_smp_in", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 1, 0, },
+ { HI6220_MMC2_CLK, "mmc2_clk", "mmc2_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 2, 0, },
+ { HI6220_MMC2_CIUCLK, "mmc2_ciuclk", "mmc2_smp_in", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 2, 0, },
+ { HI6220_USBOTG_HCLK, "usbotg_hclk", "clk_bus", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 4, 0, },
+ { HI6220_CLK_PICOPHY, "clk_picophy", "cs_dapb", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x200, 5, 0, },
+ { HI6220_HIFI, "hifi_clk", "hifi_div", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x210, 0, 0, },
+ { HI6220_DACODEC_PCLK, "dacodec_pclk", "clk_bus", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x210, 5, 0, },
+ { HI6220_EDMAC_ACLK, "edmac_aclk", "clk_bus", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x220, 2, 0, },
+ { HI6220_CS_ATB, "cs_atb", "cs_atb_div", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 0, 0, },
+ { HI6220_I2C0_CLK, "i2c0_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 1, 0, },
+ { HI6220_I2C1_CLK, "i2c1_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 2, 0, },
+ { HI6220_I2C2_CLK, "i2c2_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 3, 0, },
+ { HI6220_I2C3_CLK, "i2c3_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 4, 0, },
+ { HI6220_UART1_PCLK, "uart1_pclk", "uart1_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 5, 0, },
+ { HI6220_UART2_PCLK, "uart2_pclk", "uart2_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 6, 0, },
+ { HI6220_UART3_PCLK, "uart3_pclk", "uart3_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 7, 0, },
+ { HI6220_UART4_PCLK, "uart4_pclk", "uart4_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 8, 0, },
+ { HI6220_SPI_CLK, "spi_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 9, 0, },
+ { HI6220_TSENSOR_CLK, "tsensor_clk", "clk_bus", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 12, 0, },
+ { HI6220_MMU_CLK, "mmu_clk", "ddrc_axi1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x240, 11, 0, },
+ { HI6220_HIFI_SEL, "hifi_sel", "hifi_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 0, 0, },
+ { HI6220_MMC0_SYSPLL, "mmc0_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 1, 0, },
+ { HI6220_MMC1_SYSPLL, "mmc1_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 2, 0, },
+ { HI6220_MMC2_SYSPLL, "mmc2_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 3, 0, },
+ { HI6220_MMC0_SEL, "mmc0_sel", "mmc0_mux1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 6, 0, },
+ { HI6220_MMC1_SEL, "mmc1_sel", "mmc1_mux1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 7, 0, },
+ { HI6220_BBPPLL_SEL, "bbppll_sel", "pll0_bbp_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 9, 0, },
+ { HI6220_MEDIA_PLL_SRC, "media_pll_src", "pll_media_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 10, 0, },
+ { HI6220_MMC2_SEL, "mmc2_sel", "mmc2_mux1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 11, 0, },
+ { HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 12, 0, },
+};
+
+static struct hisi_mux_clock hi6220_mux_clks_sys[] __initdata = {
+ { HI6220_MMC0_SRC, "mmc0_src", mmc0_src_p, ARRAY_SIZE(mmc0_src_p), CLK_SET_RATE_PARENT, 0x4, 0, 1, 0, },
+ { HI6220_MMC0_SMP_IN, "mmc0_smp_in", mmc0_sample_in, ARRAY_SIZE(mmc0_sample_in), CLK_SET_RATE_PARENT, 0x4, 0, 1, 0, },
+ { HI6220_MMC1_SRC, "mmc1_src", mmc1_src_p, ARRAY_SIZE(mmc1_src_p), CLK_SET_RATE_PARENT, 0x4, 2, 1, 0, },
+ { HI6220_MMC1_SMP_IN, "mmc1_smp_in", mmc1_sample_in, ARRAY_SIZE(mmc1_sample_in), CLK_SET_RATE_PARENT, 0x4, 2, 1, 0, },
+ { HI6220_MMC2_SRC, "mmc2_src", mmc2_src_p, ARRAY_SIZE(mmc2_src_p), CLK_SET_RATE_PARENT, 0x4, 4, 1, 0, },
+ { HI6220_MMC2_SMP_IN, "mmc2_smp_in", mmc2_sample_in, ARRAY_SIZE(mmc2_sample_in), CLK_SET_RATE_PARENT, 0x4, 4, 1, 0, },
+ { HI6220_HIFI_SRC, "hifi_src", hifi_src, ARRAY_SIZE(hifi_src), CLK_SET_RATE_PARENT, 0x400, 0, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_UART1_SRC, "uart1_src", uart1_src, ARRAY_SIZE(uart1_src), CLK_SET_RATE_PARENT, 0x400, 1, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_UART2_SRC, "uart2_src", uart2_src, ARRAY_SIZE(uart2_src), CLK_SET_RATE_PARENT, 0x400, 2, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_UART3_SRC, "uart3_src", uart3_src, ARRAY_SIZE(uart3_src), CLK_SET_RATE_PARENT, 0x400, 3, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_UART4_SRC, "uart4_src", uart4_src, ARRAY_SIZE(uart4_src), CLK_SET_RATE_PARENT, 0x400, 4, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_MMC0_MUX0, "mmc0_mux0", mmc0_mux0_p, ARRAY_SIZE(mmc0_mux0_p), CLK_SET_RATE_PARENT, 0x400, 5, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_MMC1_MUX0, "mmc1_mux0", mmc1_mux0_p, ARRAY_SIZE(mmc1_mux0_p), CLK_SET_RATE_PARENT, 0x400, 11, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_MMC2_MUX0, "mmc2_mux0", mmc2_mux0_p, ARRAY_SIZE(mmc2_mux0_p), CLK_SET_RATE_PARENT, 0x400, 12, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_MMC0_MUX1, "mmc0_mux1", mmc0_mux1_p, ARRAY_SIZE(mmc0_mux1_p), CLK_SET_RATE_PARENT, 0x400, 13, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_MMC1_MUX1, "mmc1_mux1", mmc1_mux1_p, ARRAY_SIZE(mmc1_mux1_p), CLK_SET_RATE_PARENT, 0x400, 14, 1, CLK_MUX_HIWORD_MASK,},
+ { HI6220_MMC2_MUX1, "mmc2_mux1", mmc2_mux1_p, ARRAY_SIZE(mmc2_mux1_p), CLK_SET_RATE_PARENT, 0x400, 15, 1, CLK_MUX_HIWORD_MASK,},
+};
+
+static struct hi6220_divider_clock hi6220_div_clks_sys[] __initdata = {
+ { HI6220_CLK_BUS, "clk_bus", "clk_300m", CLK_SET_RATE_PARENT, 0x490, 0, 4, 7, },
+ { HI6220_MMC0_DIV, "mmc0_div", "mmc0_syspll", CLK_SET_RATE_PARENT, 0x494, 0, 6, 7, },
+ { HI6220_MMC1_DIV, "mmc1_div", "mmc1_syspll", CLK_SET_RATE_PARENT, 0x498, 0, 6, 7, },
+ { HI6220_MMC2_DIV, "mmc2_div", "mmc2_syspll", CLK_SET_RATE_PARENT, 0x49c, 0, 6, 7, },
+ { HI6220_HIFI_DIV, "hifi_div", "hifi_sel", CLK_SET_RATE_PARENT, 0x4a0, 0, 4, 7, },
+ { HI6220_BBPPLL0_DIV, "bbppll0_div", "bbppll_sel", CLK_SET_RATE_PARENT, 0x4a0, 8, 6, 15,},
+ { HI6220_CS_DAPB, "cs_dapb", "picophy_src", CLK_SET_RATE_PARENT, 0x4a0, 24, 2, 31,},
+ { HI6220_CS_ATB_DIV, "cs_atb_div", "cs_atb_syspll", CLK_SET_RATE_PARENT, 0x4a4, 0, 4, 7, },
+};
+
+static void __init hi6220_clk_sys_init(struct device_node *np)
+{
+ struct hisi_clock_data *clk_data;
+
+ clk_data = hisi_clk_init(np, HI6220_SYS_NR_CLKS);
+ if (!clk_data)
+ return;
+
+ hisi_clk_register_gate_sep(hi6220_separated_gate_clks_sys,
+ ARRAY_SIZE(hi6220_separated_gate_clks_sys), clk_data);
+
+ hisi_clk_register_mux(hi6220_mux_clks_sys,
+ ARRAY_SIZE(hi6220_mux_clks_sys), clk_data);
+
+ hi6220_clk_register_divider(hi6220_div_clks_sys,
+ ARRAY_SIZE(hi6220_div_clks_sys), clk_data);
+
+ if (!clk_data_ao)
+ return;
+
+ /* enable high speed clock on UART1 mux */
+ clk_set_parent(clk_data->clk_data.clks[HI6220_UART1_SRC],
+ clk_data_ao->clk_data.clks[HI6220_150M]);
+}
+CLK_OF_DECLARE(hi6220_clk_sys, "hisilicon,hi6220-sysctrl", hi6220_clk_sys_init);
+
+
+/* clocks in media controller */
+static const char *clk_1000_1200_src[] __initconst = { "pll_gpu_gate", "media_syspll_src", };
+static const char *clk_1440_1200_src[] __initconst = { "media_syspll_src", "media_pll_src", };
+static const char *clk_1000_1440_src[] __initconst = { "pll_gpu_gate", "media_pll_src", };
+
+static struct hisi_gate_clock hi6220_separated_gate_clks_media[] __initdata = {
+ { HI6220_DSI_PCLK, "dsi_pclk", "vpucodec", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 0, 0, },
+ { HI6220_G3D_PCLK, "g3d_pclk", "vpucodec", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 1, 0, },
+ { HI6220_ACLK_CODEC_VPU, "aclk_codec_vpu", "ade_core_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 3, 0, },
+ { HI6220_ISP_SCLK, "isp_sclk", "isp_sclk_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 5, 0, },
+ { HI6220_ADE_CORE, "ade_core", "ade_core_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 6, 0, },
+ { HI6220_MED_MMU, "media_mmu", "mmu_clk", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 8, 0, },
+ { HI6220_CFG_CSI4PHY, "cfg_csi4phy", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 9, 0, },
+ { HI6220_CFG_CSI2PHY, "cfg_csi2phy", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 10, 0, },
+ { HI6220_ISP_SCLK_GATE, "isp_sclk_gate", "media_pll_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 11, 0, },
+ { HI6220_ISP_SCLK_GATE1, "isp_sclk_gate1", "media_pll_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 12, 0, },
+ { HI6220_ADE_CORE_GATE, "ade_core_gate", "media_pll_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 14, 0, },
+ { HI6220_CODEC_VPU_GATE, "codec_vpu_gate", "clk_1000_1440", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 15, 0, },
+ { HI6220_MED_SYSPLL, "media_syspll_src", "media_syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x520, 17, 0, },
+};
+
+static struct hisi_mux_clock hi6220_mux_clks_media[] __initdata = {
+ { HI6220_1440_1200, "clk_1440_1200", clk_1440_1200_src, ARRAY_SIZE(clk_1440_1200_src), CLK_SET_RATE_PARENT, 0x51c, 0, 1, 0, },
+ { HI6220_1000_1200, "clk_1000_1200", clk_1000_1200_src, ARRAY_SIZE(clk_1000_1200_src), CLK_SET_RATE_PARENT, 0x51c, 1, 1, 0, },
+ { HI6220_1000_1440, "clk_1000_1440", clk_1000_1440_src, ARRAY_SIZE(clk_1000_1440_src), CLK_SET_RATE_PARENT, 0x51c, 6, 1, 0, },
+};
+
+static struct hi6220_divider_clock hi6220_div_clks_media[] __initdata = {
+ { HI6220_CODEC_JPEG, "codec_jpeg_aclk", "media_pll_src", CLK_SET_RATE_PARENT, 0xcbc, 0, 4, 23, },
+ { HI6220_ISP_SCLK_SRC, "isp_sclk_src", "isp_sclk_gate", CLK_SET_RATE_PARENT, 0xcbc, 8, 4, 15, },
+ { HI6220_ISP_SCLK1, "isp_sclk1", "isp_sclk_gate1", CLK_SET_RATE_PARENT, 0xcbc, 24, 4, 31, },
+ { HI6220_ADE_CORE_SRC, "ade_core_src", "ade_core_gate", CLK_SET_RATE_PARENT, 0xcc0, 16, 3, 23, },
+ { HI6220_ADE_PIX_SRC, "ade_pix_src", "clk_1440_1200", CLK_SET_RATE_PARENT, 0xcc0, 24, 6, 31, },
+ { HI6220_G3D_CLK, "g3d_clk", "clk_1000_1200", CLK_SET_RATE_PARENT, 0xcc4, 8, 4, 15, },
+ { HI6220_CODEC_VPU_SRC, "codec_vpu_src", "codec_vpu_gate", CLK_SET_RATE_PARENT, 0xcc4, 24, 6, 31, },
+};
+
+static void __init hi6220_clk_media_init(struct device_node *np)
+{
+ struct hisi_clock_data *clk_data;
+
+ clk_data = hisi_clk_init(np, HI6220_MEDIA_NR_CLKS);
+ if (!clk_data)
+ return;
+
+ hisi_clk_register_gate_sep(hi6220_separated_gate_clks_media,
+ ARRAY_SIZE(hi6220_separated_gate_clks_media), clk_data);
+
+ hisi_clk_register_mux(hi6220_mux_clks_media,
+ ARRAY_SIZE(hi6220_mux_clks_media), clk_data);
+
+ hi6220_clk_register_divider(hi6220_div_clks_media,
+ ARRAY_SIZE(hi6220_div_clks_media), clk_data);
+}
+CLK_OF_DECLARE(hi6220_clk_media, "hisilicon,hi6220-mediactrl", hi6220_clk_media_init);
+
+
+/* clocks in pmctrl */
+static struct hisi_gate_clock hi6220_gate_clks_power[] __initdata = {
+ { HI6220_PLL_GPU_GATE, "pll_gpu_gate", "gpupll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x8, 0, 0, },
+ { HI6220_PLL1_DDR_GATE, "pll1_ddr_gate", "ddrpll1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x10, 0, 0, },
+ { HI6220_PLL_DDR_GATE, "pll_ddr_gate", "ddrpll0", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x18, 0, 0, },
+ { HI6220_PLL_MEDIA_GATE, "pll_media_gate", "media_pll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x38, 0, 0, },
+ { HI6220_PLL0_BBP_GATE, "pll0_bbp_gate", "bbppll0", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x48, 0, 0, },
+};
+
+static struct hi6220_divider_clock hi6220_div_clks_power[] __initdata = {
+ { HI6220_DDRC_SRC, "ddrc_src", "ddr_sel_src", CLK_SET_RATE_PARENT, 0x5a8, 0, 4, 0, },
+ { HI6220_DDRC_AXI1, "ddrc_axi1", "ddrc_src", CLK_SET_RATE_PARENT, 0x5a8, 8, 2, 0, },
+};
+
+static void __init hi6220_clk_power_init(struct device_node *np)
+{
+ struct hisi_clock_data *clk_data;
+
+ clk_data = hisi_clk_init(np, HI6220_POWER_NR_CLKS);
+ if (!clk_data)
+ return;
+
+ hisi_clk_register_gate(hi6220_gate_clks_power,
+ ARRAY_SIZE(hi6220_gate_clks_power), clk_data);
+
+ hi6220_clk_register_divider(hi6220_div_clks_power,
+ ARRAY_SIZE(hi6220_div_clks_power), clk_data);
+}
+CLK_OF_DECLARE(hi6220_clk_power, "hisilicon,hi6220-pmctrl", hi6220_clk_power_init);
diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c
index a078e84..5d2305c 100644
--- a/drivers/clk/hisilicon/clk.c
+++ b/drivers/clk/hisilicon/clk.c
@@ -232,3 +232,32 @@ void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *clks,
data->clk_data.clks[clks[i].id] = clk;
}
}
+
+void __init hi6220_clk_register_divider(struct hi6220_divider_clock *clks,
+ int nums, struct hisi_clock_data *data)
+{
+ struct clk *clk;
+ void __iomem *base = data->base;
+ int i;
+
+ for (i = 0; i < nums; i++) {
+ clk = hi6220_register_clkdiv(NULL, clks[i].name,
+ clks[i].parent_name,
+ clks[i].flags,
+ base + clks[i].offset,
+ clks[i].shift,
+ clks[i].width,
+ clks[i].mask_bit,
+ &hisi_clk_lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ continue;
+ }
+
+ if (clks[i].alias)
+ clk_register_clkdev(clk, clks[i].alias, NULL);
+
+ data->clk_data.clks[clks[i].id] = clk;
+ }
+}
diff --git a/drivers/clk/hisilicon/clk.h b/drivers/clk/hisilicon/clk.h
index 31083ff..462a570 100644
--- a/drivers/clk/hisilicon/clk.h
+++ b/drivers/clk/hisilicon/clk.h
@@ -79,6 +79,18 @@ struct hisi_divider_clock {
const char *alias;
};
+struct hi6220_divider_clock {
+ unsigned int id;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u32 mask_bit;
+ const char *alias;
+};
+
struct hisi_gate_clock {
unsigned int id;
const char *name;
@@ -94,6 +106,9 @@ struct clk *hisi_register_clkgate_sep(struct device *, const char *,
const char *, unsigned long,
void __iomem *, u8,
u8, spinlock_t *);
+struct clk *hi6220_register_clkdiv(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ u8 shift, u8 width, u32 mask_bit, spinlock_t *lock);
struct hisi_clock_data __init *hisi_clk_init(struct device_node *, int);
void __init hisi_clk_register_fixed_rate(struct hisi_fixed_rate_clock *,
@@ -108,4 +123,6 @@ void __init hisi_clk_register_gate(struct hisi_gate_clock *,
int, struct hisi_clock_data *);
void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *,
int, struct hisi_clock_data *);
+void __init hi6220_clk_register_divider(struct hi6220_divider_clock *,
+ int, struct hisi_clock_data *);
#endif /* __HISI_CLK_H */
diff --git a/drivers/clk/hisilicon/clkdivider-hi6220.c b/drivers/clk/hisilicon/clkdivider-hi6220.c
new file mode 100644
index 0000000..9e3825b
--- /dev/null
+++ b/drivers/clk/hisilicon/clkdivider-hi6220.c
@@ -0,0 +1,273 @@
+/*
+ * Hisilicon hi6220 SoC divider clock driver
+ *
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * Author: Bintian Wang <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#define div_mask(width) ((1 << (width)) - 1)
+
+/*
+ * The reverse of DIV_ROUND_UP: The maximum number which
+ * divided by m is r
+ */
+#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
+
+/**
+ * struct hi6220_clk_divider - divider clock for hi6220
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register containing divider
+ * @shift: shift to the divider bit field
+ * @width: width of the divider bit field
+ * @mask: mask for setting divider rate
+ * @table: the div table that the divider supports
+ * @lock: register lock
+ */
+struct hi6220_clk_divider {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u32 mask;
+ const struct clk_div_table *table;
+ spinlock_t *lock;
+};
+
+#define to_hi6220_clk_divider(_hw) \
+ container_of(_hw, struct hi6220_clk_divider, hw)
+
+static unsigned int hi6220_get_table_maxdiv(const struct clk_div_table *table)
+{
+ unsigned int maxdiv = 0;
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div > maxdiv)
+ maxdiv = clkt->div;
+ return maxdiv;
+}
+
+static unsigned int hi6220_get_table_div(const struct clk_div_table *table,
+ unsigned int val)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->val == val)
+ return clkt->div;
+
+ return 0;
+}
+
+static unsigned int hi6220_get_table_val(const struct clk_div_table *table,
+ unsigned int div)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return clkt->val;
+ return 0;
+}
+
+static unsigned long hi6220_clkdiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned int div, val;
+ struct hi6220_clk_divider *dclk = to_hi6220_clk_divider(hw);
+
+ val = readl_relaxed(dclk->reg) >> dclk->shift;
+ val &= div_mask(dclk->width);
+
+ div = hi6220_get_table_div(dclk->table, val);
+ if (!div) {
+ pr_warn("%s: Invalid divisor for clock %s\n", __func__,
+ __clk_get_name(hw->clk));
+ return parent_rate;
+ }
+
+ return parent_rate / div;
+}
+
+static bool hi6220_is_valid_div(const struct clk_div_table *table,
+ unsigned int div)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->div == div)
+ return true;
+ return false;
+}
+
+static int hi6220_clkdiv_bestdiv(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate)
+{
+ unsigned int i, bestdiv = 0;
+ unsigned long parent_rate, best = 0, now, maxdiv;
+
+ struct hi6220_clk_divider *dclk = to_hi6220_clk_divider(hw);
+ struct clk *clk_parent = __clk_get_parent(hw->clk);
+
+ maxdiv = hi6220_get_table_maxdiv(dclk->table);
+
+ if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+ parent_rate = *best_parent_rate;
+ bestdiv = DIV_ROUND_UP(parent_rate, rate);
+ bestdiv = (bestdiv == 0) ? 1 : bestdiv;
+ bestdiv = (bestdiv > maxdiv) ? maxdiv : bestdiv;
+ return bestdiv;
+ }
+
+ /*
+ * The maximum divider we can use without overflowing
+ * unsigned long in rate * i below
+ */
+ maxdiv = min(ULONG_MAX / rate, maxdiv);
+
+ for (i = 1; i <= maxdiv; i++) {
+ if (!hi6220_is_valid_div(dclk->table, i))
+ continue;
+ parent_rate = __clk_round_rate(clk_parent,
+ MULT_ROUND_UP(rate, i));
+ now = parent_rate / i;
+ if (now <= rate && now > best) {
+ bestdiv = i;
+ best = now;
+ *best_parent_rate = parent_rate;
+ }
+ }
+
+ if (!bestdiv) {
+ bestdiv = hi6220_get_table_maxdiv(dclk->table);
+ *best_parent_rate = __clk_round_rate(clk_parent, 1);
+ }
+
+ return bestdiv;
+}
+
+static long hi6220_clkdiv_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int div;
+
+ if (!rate)
+ rate = 1;
+
+ div = hi6220_clkdiv_bestdiv(hw, rate, prate);
+
+ return *prate / div;
+}
+
+static int hi6220_clkdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned int div, value;
+ unsigned long flags = 0;
+ u32 data;
+ struct hi6220_clk_divider *dclk = to_hi6220_clk_divider(hw);
+
+ div = parent_rate / rate;
+
+ if (!hi6220_is_valid_div(dclk->table, div))
+ return -EINVAL;
+
+ value = hi6220_get_table_val(dclk->table, div);
+
+ if (value > div_mask(dclk->width))
+ value = div_mask(dclk->width);
+
+ if (dclk->lock)
+ spin_lock_irqsave(dclk->lock, flags);
+
+ data = readl_relaxed(dclk->reg);
+ data &= ~(div_mask(dclk->width) << dclk->shift);
+ data |= value << dclk->shift;
+ data |= dclk->mask;
+
+ writel_relaxed(data, dclk->reg);
+
+ if (dclk->lock)
+ spin_unlock_irqrestore(dclk->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops hi6220_clkdiv_ops = {
+ .recalc_rate = hi6220_clkdiv_recalc_rate,
+ .round_rate = hi6220_clkdiv_round_rate,
+ .set_rate = hi6220_clkdiv_set_rate,
+};
+
+struct clk *hi6220_register_clkdiv(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ u8 shift, u8 width, u32 mask_bit, spinlock_t *lock)
+{
+ struct hi6220_clk_divider *div;
+ struct clk *clk;
+ struct clk_init_data init;
+ struct clk_div_table *table;
+ u32 max_div, min_div;
+ int i;
+
+ /* allocate the divider */
+ div = kzalloc(sizeof(struct hi6220_clk_divider), GFP_KERNEL);
+ if (!div) {
+ pr_err("%s: could not allocate divider clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Init the divider table */
+ max_div = div_mask(width) + 1;
+ min_div = 1;
+
+ table = kzalloc(sizeof(struct clk_div_table) * (max_div + 1), GFP_KERNEL);
+ if (!table) {
+ kfree(div);
+ pr_err("%s: failed to alloc divider table!\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for (i = 0; i < max_div; i++) {
+ table[i].div = min_div + i;
+ table[i].val = table[i].div - 1;
+ }
+
+ init.name = name;
+ init.ops = &hi6220_clkdiv_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ /* struct hi6220_clk_divider assignments */
+ div->reg = reg;
+ div->shift = shift;
+ div->width = width;
+ div->mask = mask_bit ? BIT(mask_bit) : 0;
+ div->lock = lock;
+ div->hw.init = &init;
+ div->table = table;
+
+ /* register the clock */
+ clk = clk_register(dev, &div->hw);
+
+ if (IS_ERR(clk)) {
+ kfree(table);
+ kfree(div);
+ }
+
+ return clk;
+}
diff --git a/include/dt-bindings/clock/hi6220-clock.h b/include/dt-bindings/clock/hi6220-clock.h
new file mode 100644
index 0000000..70ee383
--- /dev/null
+++ b/include/dt-bindings/clock/hi6220-clock.h
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * Author: Bintian Wang <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_HI6220_H
+#define __DT_BINDINGS_CLOCK_HI6220_H
+
+/* clk in Hi6220 AO (always on) controller */
+#define HI6220_NONE_CLOCK 0
+
+/* fixed rate clocks */
+#define HI6220_REF32K 1
+#define HI6220_CLK_TCXO 2
+#define HI6220_MMC1_PAD 3
+#define HI6220_MMC2_PAD 4
+#define HI6220_MMC0_PAD 5
+#define HI6220_PLL_BBP 6
+#define HI6220_PLL_GPU 7
+#define HI6220_PLL1_DDR 8
+#define HI6220_PLL_SYS 9
+#define HI6220_PLL_SYS_MEDIA 10
+#define HI6220_DDR_SRC 11
+#define HI6220_PLL_MEDIA 12
+#define HI6220_PLL_DDR 13
+
+/* fixed factor clocks */
+#define HI6220_300M 14
+#define HI6220_150M 15
+#define HI6220_PICOPHY_SRC 16
+#define HI6220_MMC0_SRC_SEL 17
+#define HI6220_MMC1_SRC_SEL 18
+#define HI6220_MMC2_SRC_SEL 19
+#define HI6220_VPU_CODEC 20
+#define HI6220_MMC0_SMP 21
+#define HI6220_MMC1_SMP 22
+#define HI6220_MMC2_SMP 23
+
+/* gate clocks */
+#define HI6220_WDT0_PCLK 24
+#define HI6220_WDT1_PCLK 25
+#define HI6220_WDT2_PCLK 26
+#define HI6220_TIMER0_PCLK 27
+#define HI6220_TIMER1_PCLK 28
+#define HI6220_TIMER2_PCLK 29
+#define HI6220_TIMER3_PCLK 30
+#define HI6220_TIMER4_PCLK 31
+#define HI6220_TIMER5_PCLK 32
+#define HI6220_TIMER6_PCLK 33
+#define HI6220_TIMER7_PCLK 34
+#define HI6220_TIMER8_PCLK 35
+#define HI6220_UART0_PCLK 36
+
+#define HI6220_AO_NR_CLKS 37
+
+/* clk in Hi6220 systrl */
+/* gate clock */
+#define HI6220_MMC0_CLK 1
+#define HI6220_MMC0_CIUCLK 2
+#define HI6220_MMC1_CLK 3
+#define HI6220_MMC1_CIUCLK 4
+#define HI6220_MMC2_CLK 5
+#define HI6220_MMC2_CIUCLK 6
+#define HI6220_USBOTG_HCLK 7
+#define HI6220_CLK_PICOPHY 8
+#define HI6220_HIFI 9
+#define HI6220_DACODEC_PCLK 10
+#define HI6220_EDMAC_ACLK 11
+#define HI6220_CS_ATB 12
+#define HI6220_I2C0_CLK 13
+#define HI6220_I2C1_CLK 14
+#define HI6220_I2C2_CLK 15
+#define HI6220_I2C3_CLK 16
+#define HI6220_UART1_PCLK 17
+#define HI6220_UART2_PCLK 18
+#define HI6220_UART3_PCLK 19
+#define HI6220_UART4_PCLK 20
+#define HI6220_SPI_CLK 21
+#define HI6220_TSENSOR_CLK 22
+#define HI6220_MMU_CLK 23
+#define HI6220_HIFI_SEL 24
+#define HI6220_MMC0_SYSPLL 25
+#define HI6220_MMC1_SYSPLL 26
+#define HI6220_MMC2_SYSPLL 27
+#define HI6220_MMC0_SEL 28
+#define HI6220_MMC1_SEL 29
+#define HI6220_BBPPLL_SEL 30
+#define HI6220_MEDIA_PLL_SRC 31
+#define HI6220_MMC2_SEL 32
+#define HI6220_CS_ATB_SYSPLL 33
+
+/* mux clocks */
+#define HI6220_MMC0_SRC 34
+#define HI6220_MMC0_SMP_IN 35
+#define HI6220_MMC1_SRC 36
+#define HI6220_MMC1_SMP_IN 37
+#define HI6220_MMC2_SRC 38
+#define HI6220_MMC2_SMP_IN 39
+#define HI6220_HIFI_SRC 40
+#define HI6220_UART1_SRC 41
+#define HI6220_UART2_SRC 42
+#define HI6220_UART3_SRC 43
+#define HI6220_UART4_SRC 44
+#define HI6220_MMC0_MUX0 45
+#define HI6220_MMC1_MUX0 46
+#define HI6220_MMC2_MUX0 47
+#define HI6220_MMC0_MUX1 48
+#define HI6220_MMC1_MUX1 49
+#define HI6220_MMC2_MUX1 50
+
+/* divider clocks */
+#define HI6220_CLK_BUS 51
+#define HI6220_MMC0_DIV 52
+#define HI6220_MMC1_DIV 53
+#define HI6220_MMC2_DIV 54
+#define HI6220_HIFI_DIV 55
+#define HI6220_BBPPLL0_DIV 56
+#define HI6220_CS_DAPB 57
+#define HI6220_CS_ATB_DIV 58
+
+#define HI6220_SYS_NR_CLKS 59
+
+/* clk in Hi6220 media controller */
+/* gate clocks */
+#define HI6220_DSI_PCLK 1
+#define HI6220_G3D_PCLK 2
+#define HI6220_ACLK_CODEC_VPU 3
+#define HI6220_ISP_SCLK 4
+#define HI6220_ADE_CORE 5
+#define HI6220_MED_MMU 6
+#define HI6220_CFG_CSI4PHY 7
+#define HI6220_CFG_CSI2PHY 8
+#define HI6220_ISP_SCLK_GATE 9
+#define HI6220_ISP_SCLK_GATE1 10
+#define HI6220_ADE_CORE_GATE 11
+#define HI6220_CODEC_VPU_GATE 12
+#define HI6220_MED_SYSPLL 13
+
+/* mux clocks */
+#define HI6220_1440_1200 14
+#define HI6220_1000_1200 15
+#define HI6220_1000_1440 16
+
+/* divider clocks */
+#define HI6220_CODEC_JPEG 17
+#define HI6220_ISP_SCLK_SRC 18
+#define HI6220_ISP_SCLK1 19
+#define HI6220_ADE_CORE_SRC 20
+#define HI6220_ADE_PIX_SRC 21
+#define HI6220_G3D_CLK 22
+#define HI6220_CODEC_VPU_SRC 23
+
+#define HI6220_MEDIA_NR_CLKS 24
+
+/* clk in Hi6220 power controller */
+/* gate clocks */
+#define HI6220_PLL_GPU_GATE 1
+#define HI6220_PLL1_DDR_GATE 2
+#define HI6220_PLL_DDR_GATE 3
+#define HI6220_PLL_MEDIA_GATE 4
+#define HI6220_PLL0_BBP_GATE 5
+
+/* divider clocks */
+#define HI6220_DDRC_SRC 6
+#define HI6220_DDRC_AXI1 7
+
+#define HI6220_POWER_NR_CLKS 8
+#endif
--
1.9.1
Add initial dtsi file to support Hisilicon Hi6220 SoC with
support of Octal core CPUs in two clusters and each cluster
has quard Cortex-A53.
Also add dts file to support HiKey development board which
based on Hi6220 SoC.
Signed-off-by: Bintian Wang <[email protected]>
Reviewed-by: Haojian Zhuang <[email protected]>
Reviewed-by: Yiping Xu <[email protected]>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/hisilicon/Makefile | 5 +
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 31 +++++
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 172 +++++++++++++++++++++++++
4 files changed, 209 insertions(+)
create mode 100644 arch/arm64/boot/dts/hisilicon/Makefile
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index ad26a75..38913be 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -4,6 +4,7 @@ dts-dirs += arm
dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
+dts-dirs += hisilicon
dts-dirs += mediatek
dts-dirs += qcom
dts-dirs += sprd
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
new file mode 100644
index 0000000..fa81a6e
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
new file mode 100644
index 0000000..e36a539
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -0,0 +1,31 @@
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+/*Reserved 1MB memory for MCU*/
+/memreserve/ 0x05e00000 0x00100000;
+
+#include "hi6220.dtsi"
+
+/ {
+ model = "HiKey Development Board";
+ compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 0000000..e774865
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,172 @@
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi6220";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f6801000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+ <0x0 0xf6802000 0 0x2000>, /* GICC */
+ <0x0 0xf6804000 0 0x2000>, /* GICH */
+ <0x0 0xf6806000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ao_ctrl: ao_ctrl {
+ compatible = "hisilicon,hi6220-aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sys_ctrl: sys_ctrl {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ media_ctrl: media_ctrl {
+ compatible = "hisilicon,hi6220-mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pm_ctrl: pm_ctrl {
+ compatible = "hisilicon,hi6220-pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: uart@f8015000 { /* console */
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf8015000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ao_ctrl HI6220_UART0_PCLK>, <&ao_ctrl HI6220_UART0_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+};
--
1.9.1
On 5 May 2015 at 20:06, Bintian Wang <[email protected]> wrote:
> Hi6220 is one mobile solution of Hisilicon, this patchset contains
> initial support for Hi6220 SoC and HiKey development board, which
> supports octal ARM Cortex A53 cores. Initial support is minimal and
> includes just the arch configuration, clock driver, device tree
> configuration.
>
> PSCI is enabled in device tree and there is no problem to boot all the
> octal cores, and the CPU hotplug is also working now, you can download
> and compile the latest firmware based on the following link to run this
> patch set:
> https://github.com/96boards/documentation/wiki/UEFI
>
> Changes v4:
> * Rebase to kernel 4.1-rc1
> * Delete "arm,cortex-a15-gic" from the gic node in dts
>
Acked-by: Haojian Zhuang <[email protected]>
On 5 May 2015 at 05:06, Bintian Wang <[email protected]> wrote:
> Hi6220 is one mobile solution of Hisilicon, this patchset contains
> initial support for Hi6220 SoC and HiKey development board, which
> supports octal ARM Cortex A53 cores. Initial support is minimal and
> includes just the arch configuration, clock driver, device tree
> configuration.
>
> PSCI is enabled in device tree and there is no problem to boot all the
> octal cores, and the CPU hotplug is also working now, you can download
> and compile the latest firmware based on the following link to run this
> patch set:
> https://github.com/96boards/documentation/wiki/UEFI
>
> Changes v4:
> * Rebase to kernel 4.1-rc1
> * Delete "arm,cortex-a15-gic" from the gic node in dts
Tested by: Tyler Baker <[email protected]>
Built and booted all v4 patches in this series ontop a v4.1-rc1 based
tree. Tested with the UEFI load mentioned above, booting to a minimal
ramdisk userspace[0]. Confirmed all 8 CPUs were activated.
>
> Changes v3:
> * Verified the CPU hotplug based on the new released firmware
> * Redefined the compatible strings of four system controllers in dts
> * Setting COMMON_CLK_HI6220 to a bool symbol
> * Keep CONFGI_ARCH_HISI sorted alphabetically
>
> Changes v2:
> * Split the DT bindings documents into earlier patches
> * Change SMP enable method from spin-table to PSCI in device tree
> * Remove "clock-frequency" from armv8-timer device node in device tree
> * Add more description about Hisilicon designed system controllers
> in DT bindings document
> * Enable high speed clock on UART1 mux
> * Other changes based on the discussion in the mailing list:
> https://lkml.org/lkml/2015/2/5/147
>
> Bintian Wang (5):
> arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig
> arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC
> clk: hi6220: Document devicetree bindings for hi6220 clock
> clk: hi6220: Clock driver support for Hisilicon hi6220 SoC
> arm64: dts: Add dts files for Hisilicon Hi6220 SoC
>
> .../bindings/arm/hisilicon/hisilicon.txt | 87 ++++++
> .../devicetree/bindings/clock/hi6220-clock.txt | 34 +++
> arch/arm64/Kconfig | 5 +
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/hisilicon/Makefile | 5 +
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 31 +++
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 172 ++++++++++++
> arch/arm64/configs/defconfig | 1 +
> drivers/clk/Kconfig | 2 +
> drivers/clk/Makefile | 4 +-
> drivers/clk/hisilicon/Kconfig | 6 +
> drivers/clk/hisilicon/Makefile | 3 +-
> drivers/clk/hisilicon/clk-hi6220.c | 292 +++++++++++++++++++++
> drivers/clk/hisilicon/clk.c | 29 ++
> drivers/clk/hisilicon/clk.h | 17 ++
> drivers/clk/hisilicon/clkdivider-hi6220.c | 273 +++++++++++++++++++
> include/dt-bindings/clock/hi6220-clock.h | 173 ++++++++++++
> 17 files changed, 1131 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt
> create mode 100644 arch/arm64/boot/dts/hisilicon/Makefile
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> create mode 100644 drivers/clk/hisilicon/Kconfig
> create mode 100644 drivers/clk/hisilicon/clk-hi6220.c
> create mode 100644 drivers/clk/hisilicon/clkdivider-hi6220.c
> create mode 100644 include/dt-bindings/clock/hi6220-clock.h
>
> --
> 1.9.1
>
Cheers,
Tyler
[0] http://kernelci.org/boot/hi6220-hikey/job/testing/kernel/v4.1-rc1-5-gf609561/defconfig/defconfig/lab/lab-tbaker/?_id=5549541559b51417e999c5cd
Thank you Tyler for testing this patch set.
On 2015/5/6 7:46, Tyler Baker wrote:
> On 5 May 2015 at 05:06, Bintian Wang <[email protected]> wrote:
>> Hi6220 is one mobile solution of Hisilicon, this patchset contains
>> initial support for Hi6220 SoC and HiKey development board, which
>> supports octal ARM Cortex A53 cores. Initial support is minimal and
>> includes just the arch configuration, clock driver, device tree
>> configuration.
>>
>> PSCI is enabled in device tree and there is no problem to boot all the
>> octal cores, and the CPU hotplug is also working now, you can download
>> and compile the latest firmware based on the following link to run this
>> patch set:
>> https://github.com/96boards/documentation/wiki/UEFI
>>
>> Changes v4:
>> * Rebase to kernel 4.1-rc1
>> * Delete "arm,cortex-a15-gic" from the gic node in dts
>
> Tested by: Tyler Baker <[email protected]>
>
> Built and booted all v4 patches in this series ontop a v4.1-rc1 based
> tree. Tested with the UEFI load mentioned above, booting to a minimal
> ramdisk userspace[0]. Confirmed all 8 CPUs were activated.
>
>>
>> Changes v3:
>> * Verified the CPU hotplug based on the new released firmware
>> * Redefined the compatible strings of four system controllers in dts
>> * Setting COMMON_CLK_HI6220 to a bool symbol
>> * Keep CONFGI_ARCH_HISI sorted alphabetically
>>
>> Changes v2:
>> * Split the DT bindings documents into earlier patches
>> * Change SMP enable method from spin-table to PSCI in device tree
>> * Remove "clock-frequency" from armv8-timer device node in device tree
>> * Add more description about Hisilicon designed system controllers
>> in DT bindings document
>> * Enable high speed clock on UART1 mux
>> * Other changes based on the discussion in the mailing list:
>> https://lkml.org/lkml/2015/2/5/147
>>
>> Bintian Wang (5):
>> arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig
>> arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC
>> clk: hi6220: Document devicetree bindings for hi6220 clock
>> clk: hi6220: Clock driver support for Hisilicon hi6220 SoC
>> arm64: dts: Add dts files for Hisilicon Hi6220 SoC
>>
>> .../bindings/arm/hisilicon/hisilicon.txt | 87 ++++++
>> .../devicetree/bindings/clock/hi6220-clock.txt | 34 +++
>> arch/arm64/Kconfig | 5 +
>> arch/arm64/boot/dts/Makefile | 1 +
>> arch/arm64/boot/dts/hisilicon/Makefile | 5 +
>> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 31 +++
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 172 ++++++++++++
>> arch/arm64/configs/defconfig | 1 +
>> drivers/clk/Kconfig | 2 +
>> drivers/clk/Makefile | 4 +-
>> drivers/clk/hisilicon/Kconfig | 6 +
>> drivers/clk/hisilicon/Makefile | 3 +-
>> drivers/clk/hisilicon/clk-hi6220.c | 292 +++++++++++++++++++++
>> drivers/clk/hisilicon/clk.c | 29 ++
>> drivers/clk/hisilicon/clk.h | 17 ++
>> drivers/clk/hisilicon/clkdivider-hi6220.c | 273 +++++++++++++++++++
>> include/dt-bindings/clock/hi6220-clock.h | 173 ++++++++++++
>> 17 files changed, 1131 insertions(+), 4 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt
>> create mode 100644 arch/arm64/boot/dts/hisilicon/Makefile
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> create mode 100644 drivers/clk/hisilicon/Kconfig
>> create mode 100644 drivers/clk/hisilicon/clk-hi6220.c
>> create mode 100644 drivers/clk/hisilicon/clkdivider-hi6220.c
>> create mode 100644 include/dt-bindings/clock/hi6220-clock.h
>>
>> --
>> 1.9.1
>>
>
> Cheers,
>
> Tyler
>
> [0] http://kernelci.org/boot/hi6220-hikey/job/testing/kernel/v4.1-rc1-5-gf609561/defconfig/defconfig/lab/lab-tbaker/?_id=5549541559b51417e999c5cd
>
> .
>
Hello Mark, Will,
Any other suggestions for this patch set?
Thanks,
Bintian
On 2015/5/5 20:06, Bintian Wang wrote:
> Hi6220 is one mobile solution of Hisilicon, this patchset contains
> initial support for Hi6220 SoC and HiKey development board, which
> supports octal ARM Cortex A53 cores. Initial support is minimal and
> includes just the arch configuration, clock driver, device tree
> configuration.
>
> PSCI is enabled in device tree and there is no problem to boot all the
> octal cores, and the CPU hotplug is also working now, you can download
> and compile the latest firmware based on the following link to run this
> patch set:
> https://github.com/96boards/documentation/wiki/UEFI
>
> Changes v4:
> * Rebase to kernel 4.1-rc1
> * Delete "arm,cortex-a15-gic" from the gic node in dts
>
> Changes v3:
> * Verified the CPU hotplug based on the new released firmware
> * Redefined the compatible strings of four system controllers in dts
> * Setting COMMON_CLK_HI6220 to a bool symbol
> * Keep CONFGI_ARCH_HISI sorted alphabetically
>
> Changes v2:
> * Split the DT bindings documents into earlier patches
> * Change SMP enable method from spin-table to PSCI in device tree
> * Remove "clock-frequency" from armv8-timer device node in device tree
> * Add more description about Hisilicon designed system controllers
> in DT bindings document
> * Enable high speed clock on UART1 mux
> * Other changes based on the discussion in the mailing list:
> https://lkml.org/lkml/2015/2/5/147
>
> Bintian Wang (5):
> arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig
> arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC
> clk: hi6220: Document devicetree bindings for hi6220 clock
> clk: hi6220: Clock driver support for Hisilicon hi6220 SoC
> arm64: dts: Add dts files for Hisilicon Hi6220 SoC
>
> .../bindings/arm/hisilicon/hisilicon.txt | 87 ++++++
> .../devicetree/bindings/clock/hi6220-clock.txt | 34 +++
> arch/arm64/Kconfig | 5 +
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/hisilicon/Makefile | 5 +
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 31 +++
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 172 ++++++++++++
> arch/arm64/configs/defconfig | 1 +
> drivers/clk/Kconfig | 2 +
> drivers/clk/Makefile | 4 +-
> drivers/clk/hisilicon/Kconfig | 6 +
> drivers/clk/hisilicon/Makefile | 3 +-
> drivers/clk/hisilicon/clk-hi6220.c | 292 +++++++++++++++++++++
> drivers/clk/hisilicon/clk.c | 29 ++
> drivers/clk/hisilicon/clk.h | 17 ++
> drivers/clk/hisilicon/clkdivider-hi6220.c | 273 +++++++++++++++++++
> include/dt-bindings/clock/hi6220-clock.h | 173 ++++++++++++
> 17 files changed, 1131 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt
> create mode 100644 arch/arm64/boot/dts/hisilicon/Makefile
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> create mode 100644 drivers/clk/hisilicon/Kconfig
> create mode 100644 drivers/clk/hisilicon/clk-hi6220.c
> create mode 100644 drivers/clk/hisilicon/clkdivider-hi6220.c
> create mode 100644 include/dt-bindings/clock/hi6220-clock.h
>
On 05/05, Bintian Wang wrote:
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 9897f35..935c44b 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -152,6 +152,8 @@ config COMMON_CLK_CDCE706
>
> source "drivers/clk/qcom/Kconfig"
>
> +source "drivers/clk/hisilicon/Kconfig"
> +
Please move this above qcom to maintain alphabet sort.
> endmenu
>
> source "drivers/clk/bcm/Kconfig"
> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
> new file mode 100644
> index 0000000..8034739
> --- /dev/null
> +++ b/drivers/clk/hisilicon/Kconfig
> @@ -0,0 +1,6 @@
> +config COMMON_CLK_HI6220
> + bool "Hi6220 Clock Driver"
> + depends on OF && ARCH_HISI
> + default y
Can this be
depends on ARCH_HISI || COMPILE_TEST
default ARCH_HISI
instead? I'd like to increase build coverage.
> + help
> + Build the Hisilicon Hi6220 clock driver based on the common clock framework.
> diff --git a/drivers/clk/hisilicon/clk-hi6220.c b/drivers/clk/hisilicon/clk-hi6220.c
> new file mode 100644
> index 0000000..91b1cd7
> --- /dev/null
> +++ b/drivers/clk/hisilicon/clk-hi6220.c
> @@ -0,0 +1,292 @@
> +/*
> + * Hisilicon Hi6220 clock driver
> + *
> + * Copyright (c) 2015 Hisilicon Limited.
> + *
> + * Author: Bintian Wang <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +#include <linux/clk.h>
Do we need to include linux/clk.h? I don't see any consumer
usage here.
> +
> +#include <dt-bindings/clock/hi6220-clock.h>
> +
> +#include "clk.h"
> +
> diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c
> index a078e84..5d2305c 100644
> --- a/drivers/clk/hisilicon/clk.c
> +++ b/drivers/clk/hisilicon/clk.c
> @@ -108,4 +123,6 @@ void __init hisi_clk_register_gate(struct hisi_gate_clock *,
> int, struct hisi_clock_data *);
> void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *,
> int, struct hisi_clock_data *);
> +void __init hi6220_clk_register_divider(struct hi6220_divider_clock *,
> + int, struct hisi_clock_data *);
__init markings on function prototypes are useless. Please remove them.
> #endif /* __HISI_CLK_H */
> diff --git a/drivers/clk/hisilicon/clkdivider-hi6220.c b/drivers/clk/hisilicon/clkdivider-hi6220.c
> +
> +/**
> + * struct hi6220_clk_divider - divider clock for hi6220
> + *
> + * @hw: handle between common and hardware-specific interfaces
> + * @reg: register containing divider
> + * @shift: shift to the divider bit field
> + * @width: width of the divider bit field
> + * @mask: mask for setting divider rate
> + * @table: the div table that the divider supports
> + * @lock: register lock
> + */
> +struct hi6220_clk_divider {
> + struct clk_hw hw;
> + void __iomem *reg;
> + u8 shift;
> + u8 width;
> + u32 mask;
> + const struct clk_div_table *table;
> + spinlock_t *lock;
> +};
The clk-divider.c code has been made "reusable". Can you please
try to use the functions that it now exposes instead of
copy/pasting it and modifying it to suit your needs? A lot of
this code looks the same.
> +
> +#define to_hi6220_clk_divider(_hw) \
[..]
> +
> +static struct clk_ops hi6220_clkdiv_ops = {
const?
> + .recalc_rate = hi6220_clkdiv_recalc_rate,
> + .round_rate = hi6220_clkdiv_round_rate,
> + .set_rate = hi6220_clkdiv_set_rate,
> +};
> +
> +struct clk *hi6220_register_clkdiv(struct device *dev, const char *name,
> + const char *parent_name, unsigned long flags, void __iomem *reg,
> + u8 shift, u8 width, u32 mask_bit, spinlock_t *lock)
> +{
> + struct hi6220_clk_divider *div;
> + struct clk *clk;
> + struct clk_init_data init;
> + struct clk_div_table *table;
> + u32 max_div, min_div;
> + int i;
> +
> + /* allocate the divider */
> + div = kzalloc(sizeof(struct hi6220_clk_divider), GFP_KERNEL);
> + if (!div) {
> + pr_err("%s: could not allocate divider clk\n", __func__);
Useless error message on allocation failure. Please run
checkpatch. I've sent a patch to remove these from basic clock
types.
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + /* Init the divider table */
> + max_div = div_mask(width) + 1;
> + min_div = 1;
> +
> + table = kzalloc(sizeof(struct clk_div_table) * (max_div + 1), GFP_KERNEL);
> + if (!table) {
> + kfree(div);
> + pr_err("%s: failed to alloc divider table!\n", __func__);
ditto.
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + for (i = 0; i < max_div; i++) {
> + table[i].div = min_div + i;
> + table[i].val = table[i].div - 1;
> + }
> +
> + init.name = name;
> + init.ops = &hi6220_clkdiv_ops;
> + init.flags = flags | CLK_IS_BASIC;
It's basic?
> + init.parent_names = parent_name ? &parent_name : NULL;
> + init.num_parents = parent_name ? 1 : 0;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On 05/05, Bintian Wang wrote:
> Document DT files bindings for Hisilicon hi6220 clock.
>
> Signed-off-by: Bintian Wang <[email protected]>
> Reviewed-by: Haojian Zhuang <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On 05/05, Bintian Wang wrote:
> This patch adds documentation for the devicetree bindings used by the
> DT files of Hisilicon hi6220 SoC mobile platform.
>
> Signed-off-by: Bintian Wang <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hello Stephen,
On 2015/5/15 8:27, Stephen Boyd wrote:
> On 05/05, Bintian Wang wrote:
>> This patch adds documentation for the devicetree bindings used by the
>> DT files of Hisilicon hi6220 SoC mobile platform.
>>
>> Signed-off-by: Bintian Wang <[email protected]>
>
> Acked-by: Stephen Boyd <[email protected]>
>
Thanks for your ACK!
Bintian
Hello Stephen,
On 2015/5/15 8:25, Stephen Boyd wrote:
> On 05/05, Bintian Wang wrote:
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 9897f35..935c44b 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -152,6 +152,8 @@ config COMMON_CLK_CDCE706
>>
>> source "drivers/clk/qcom/Kconfig"
>>
>> +source "drivers/clk/hisilicon/Kconfig"
>> +
>
> Please move this above qcom to maintain alphabet sort.
OK, fix in next version.
>
>> endmenu
>>
>> source "drivers/clk/bcm/Kconfig"
>> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
>> new file mode 100644
>> index 0000000..8034739
>> --- /dev/null
>> +++ b/drivers/clk/hisilicon/Kconfig
>> @@ -0,0 +1,6 @@
>> +config COMMON_CLK_HI6220
>> + bool "Hi6220 Clock Driver"
>> + depends on OF && ARCH_HISI
>> + default y
>
> Can this be
>
> depends on ARCH_HISI || COMPILE_TEST
> default ARCH_HISI
>
> instead? I'd like to increase build coverage.
No problem, will fix in next version.
>
>> + help
>> + Build the Hisilicon Hi6220 clock driver based on the common clock framework.
>> diff --git a/drivers/clk/hisilicon/clk-hi6220.c b/drivers/clk/hisilicon/clk-hi6220.c
>> new file mode 100644
>> index 0000000..91b1cd7
>> --- /dev/null
>> +++ b/drivers/clk/hisilicon/clk-hi6220.c
>> @@ -0,0 +1,292 @@
>> +/*
>> + * Hisilicon Hi6220 clock driver
>> + *
>> + * Copyright (c) 2015 Hisilicon Limited.
>> + *
>> + * Author: Bintian Wang <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/io.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/clk.h>
>
> Do we need to include linux/clk.h? I don't see any consumer
> usage here.
You are right, remove in next version.
>
>> +
>> +#include <dt-bindings/clock/hi6220-clock.h>
>> +
>> +#include "clk.h"
>> +
>> diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c
>> index a078e84..5d2305c 100644
>> --- a/drivers/clk/hisilicon/clk.c
>> +++ b/drivers/clk/hisilicon/clk.c
>> @@ -108,4 +123,6 @@ void __init hisi_clk_register_gate(struct hisi_gate_clock *,
>> int, struct hisi_clock_data *);
>> void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *,
>> int, struct hisi_clock_data *);
>> +void __init hi6220_clk_register_divider(struct hi6220_divider_clock *,
>> + int, struct hisi_clock_data *);
>
> __init markings on function prototypes are useless. Please remove them.
OK
>
>> #endif /* __HISI_CLK_H */
>> diff --git a/drivers/clk/hisilicon/clkdivider-hi6220.c b/drivers/clk/hisilicon/clkdivider-hi6220.c
>> +
>> +/**
>> + * struct hi6220_clk_divider - divider clock for hi6220
>> + *
>> + * @hw: handle between common and hardware-specific interfaces
>> + * @reg: register containing divider
>> + * @shift: shift to the divider bit field
>> + * @width: width of the divider bit field
>> + * @mask: mask for setting divider rate
>> + * @table: the div table that the divider supports
>> + * @lock: register lock
>> + */
>> +struct hi6220_clk_divider {
>> + struct clk_hw hw;
>> + void __iomem *reg;
>> + u8 shift;
>> + u8 width;
>> + u32 mask;
>> + const struct clk_div_table *table;
>> + spinlock_t *lock;
>> +};
>
> The clk-divider.c code has been made "reusable". Can you please
> try to use the functions that it now exposes instead of
> copy/pasting it and modifying it to suit your needs? A lot of
> this code looks the same.
In fact, I discussed this problem with Rob Herring and Mike Turquette
in the 96boards internal mail list before.
The divider in hi6220 has a mask bit to guarantee writing the correct
bits in register when setting rate, but the index of this mask bit has
no rules to get (e.g. by left shift some fixed bits), so I add this
divider clock to handle it, we can regard hi6220_clk_divider as a
special case of generic divider clock.
If I don't add this divider clock for hi6220 chip, then I should change
the core APIs "clk_register_divider" and "clk_register_divider_table",
and then many other drivers will be updated.
So I think just add this divider clock is a good solution now.
>
>> +
>> +#define to_hi6220_clk_divider(_hw) \
> [..]
>> +
>> +static struct clk_ops hi6220_clkdiv_ops = {
>
> const?
Add in next version.
>
>> + .recalc_rate = hi6220_clkdiv_recalc_rate,
>> + .round_rate = hi6220_clkdiv_round_rate,
>> + .set_rate = hi6220_clkdiv_set_rate,
>> +};
>> +
>> +struct clk *hi6220_register_clkdiv(struct device *dev, const char *name,
>> + const char *parent_name, unsigned long flags, void __iomem *reg,
>> + u8 shift, u8 width, u32 mask_bit, spinlock_t *lock)
>> +{
>> + struct hi6220_clk_divider *div;
>> + struct clk *clk;
>> + struct clk_init_data init;
>> + struct clk_div_table *table;
>> + u32 max_div, min_div;
>> + int i;
>> +
>> + /* allocate the divider */
>> + div = kzalloc(sizeof(struct hi6220_clk_divider), GFP_KERNEL);
>> + if (!div) {
>> + pr_err("%s: could not allocate divider clk\n", __func__);
>
> Useless error message on allocation failure. Please run
> checkpatch. I've sent a patch to remove these from basic clock
> types.
Remove in next version.
>
>> + return ERR_PTR(-ENOMEM);
>> + }
>> +
>> + /* Init the divider table */
>> + max_div = div_mask(width) + 1;
>> + min_div = 1;
>> +
>> + table = kzalloc(sizeof(struct clk_div_table) * (max_div + 1), GFP_KERNEL);
>> + if (!table) {
>> + kfree(div);
>> + pr_err("%s: failed to alloc divider table!\n", __func__);
>
> ditto.
Will remove in next version.
>
>> + return ERR_PTR(-ENOMEM);
>> + }
>> +
>> + for (i = 0; i < max_div; i++) {
>> + table[i].div = min_div + i;
>> + table[i].val = table[i].div - 1;
>> + }
>> +
>> + init.name = name;
>> + init.ops = &hi6220_clkdiv_ops;
>> + init.flags = flags | CLK_IS_BASIC;
>
> It's basic?
I rechecked this flag, it's really useless to us, so I can remove it.
But can you tell me which case I should use it?
How about just send this patch for review not the whole patch set in
next version?
Thanks,
Bintian
>
>> + init.parent_names = parent_name ? &parent_name : NULL;
>> + init.num_parents = parent_name ? 1 : 0;
>
On 05/15, Bintian wrote:
> On 2015/5/15 8:25, Stephen Boyd wrote:
> >On 05/05, Bintian Wang wrote:
> >>diff --git a/drivers/clk/hisilicon/clkdivider-hi6220.c b/drivers/clk/hisilicon/clkdivider-hi6220.c
> >>+
> >>+/**
> >>+ * struct hi6220_clk_divider - divider clock for hi6220
> >>+ *
> >>+ * @hw: handle between common and hardware-specific interfaces
> >>+ * @reg: register containing divider
> >>+ * @shift: shift to the divider bit field
> >>+ * @width: width of the divider bit field
> >>+ * @mask: mask for setting divider rate
> >>+ * @table: the div table that the divider supports
> >>+ * @lock: register lock
> >>+ */
> >>+struct hi6220_clk_divider {
> >>+ struct clk_hw hw;
> >>+ void __iomem *reg;
> >>+ u8 shift;
> >>+ u8 width;
> >>+ u32 mask;
> >>+ const struct clk_div_table *table;
> >>+ spinlock_t *lock;
> >>+};
> >
> >The clk-divider.c code has been made "reusable". Can you please
> >try to use the functions that it now exposes instead of
> >copy/pasting it and modifying it to suit your needs? A lot of
> >this code looks the same.
> In fact, I discussed this problem with Rob Herring and Mike Turquette
> in the 96boards internal mail list before.
>
> The divider in hi6220 has a mask bit to guarantee writing the correct
> bits in register when setting rate, but the index of this mask bit has
> no rules to get (e.g. by left shift some fixed bits), so I add this
> divider clock to handle it, we can regard hi6220_clk_divider as a
> special case of generic divider clock.
>
> If I don't add this divider clock for hi6220 chip, then I should change
> the core APIs "clk_register_divider" and "clk_register_divider_table",
> and then many other drivers will be updated.
> So I think just add this divider clock is a good solution now.
I think you missed my point. I didn't suggest using
clk_register_divider or clk_register_divider_table(). I'm
suggesting to use
unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
unsigned int val, const struct clk_div_table *table,
unsigned long flags);
long divider_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate, const struct clk_div_table *table,
u8 width, unsigned long flags);
int divider_get_val(unsigned long rate, unsigned long parent_rate,
const struct clk_div_table *table, u8 width,
unsigned long flags);
> >>+ return ERR_PTR(-ENOMEM);
> >>+ }
> >>+
> >>+ for (i = 0; i < max_div; i++) {
> >>+ table[i].div = min_div + i;
> >>+ table[i].val = table[i].div - 1;
> >>+ }
> >>+
> >>+ init.name = name;
> >>+ init.ops = &hi6220_clkdiv_ops;
> >>+ init.flags = flags | CLK_IS_BASIC;
> >
> >It's basic?
> I rechecked this flag, it's really useless to us, so I can remove it.
> But can you tell me which case I should use it?
I think the basic flag is there for drivers that want to know what type
of clock they're dealing with when all they have is the struct clk_hw
pointer. I like to discourage use of this flag in hopes of deleting
it someday.
>
> How about just send this patch for review not the whole patch set in
> next version?
>
Yes a single patch is fine. I take it you want the patch to go
through arm-soc with some Ack from us?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hello Stephen,
2015-05-16 3:30 GMT+08:00 Stephen Boyd <[email protected]>:
> On 05/15, Bintian wrote:
>> On 2015/5/15 8:25, Stephen Boyd wrote:
>> >On 05/05, Bintian Wang wrote:
>> >>diff --git a/drivers/clk/hisilicon/clkdivider-hi6220.c b/drivers/clk/hisilicon/clkdivider-hi6220.c
>> >>+
>> >>+/**
>> >>+ * struct hi6220_clk_divider - divider clock for hi6220
>> >>+ *
>> >>+ * @hw: handle between common and hardware-specific interfaces
>> >>+ * @reg: register containing divider
>> >>+ * @shift: shift to the divider bit field
>> >>+ * @width: width of the divider bit field
>> >>+ * @mask: mask for setting divider rate
>> >>+ * @table: the div table that the divider supports
>> >>+ * @lock: register lock
>> >>+ */
>> >>+struct hi6220_clk_divider {
>> >>+ struct clk_hw hw;
>> >>+ void __iomem *reg;
>> >>+ u8 shift;
>> >>+ u8 width;
>> >>+ u32 mask;
>> >>+ const struct clk_div_table *table;
>> >>+ spinlock_t *lock;
>> >>+};
>> >
>> >The clk-divider.c code has been made "reusable". Can you please
>> >try to use the functions that it now exposes instead of
>> >copy/pasting it and modifying it to suit your needs? A lot of
>> >this code looks the same.
>> In fact, I discussed this problem with Rob Herring and Mike Turquette
>> in the 96boards internal mail list before.
>>
>> The divider in hi6220 has a mask bit to guarantee writing the correct
>> bits in register when setting rate, but the index of this mask bit has
>> no rules to get (e.g. by left shift some fixed bits), so I add this
>> divider clock to handle it, we can regard hi6220_clk_divider as a
>> special case of generic divider clock.
>>
>> If I don't add this divider clock for hi6220 chip, then I should change
>> the core APIs "clk_register_divider" and "clk_register_divider_table",
>> and then many other drivers will be updated.
>> So I think just add this divider clock is a good solution now.
>
> I think you missed my point. I didn't suggest using
> clk_register_divider or clk_register_divider_table(). I'm
> suggesting to use
>
> unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
> unsigned int val, const struct clk_div_table *table,
> unsigned long flags);
> long divider_round_rate(struct clk_hw *hw, unsigned long rate,
> unsigned long *prate, const struct clk_div_table *table,
> u8 width, unsigned long flags);
> int divider_get_val(unsigned long rate, unsigned long parent_rate,
> const struct clk_div_table *table, u8 width,
> unsigned long flags);
Got it and I will prepare next version soon.
>
>> >>+ return ERR_PTR(-ENOMEM);
>> >>+ }
>> >>+
>> >>+ for (i = 0; i < max_div; i++) {
>> >>+ table[i].div = min_div + i;
>> >>+ table[i].val = table[i].div - 1;
>> >>+ }
>> >>+
>> >>+ init.name = name;
>> >>+ init.ops = &hi6220_clkdiv_ops;
>> >>+ init.flags = flags | CLK_IS_BASIC;
>> >
>> >It's basic?
>> I rechecked this flag, it's really useless to us, so I can remove it.
>> But can you tell me which case I should use it?
>
> I think the basic flag is there for drivers that want to know what type
> of clock they're dealing with when all they have is the struct clk_hw
> pointer. I like to discourage use of this flag in hopes of deleting
> it someday.
>
>>
>> How about just send this patch for review not the whole patch set in
>> next version?
>>
>
> Yes a single patch is fine. I take it you want the patch to go
> through arm-soc with some Ack from us?
Yes, exactly.
The dts file includes the clock head file, this patch goes through
arm-soc is a good choice.
Thanks,
Bintian
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On 05/15/15 19:54, Brent Wang wrote:
>
>>> How about just send this patch for review not the whole patch set in
>>> next version?
>>>
>> Yes a single patch is fine. I take it you want the patch to go
>> through arm-soc with some Ack from us?
> Yes, exactly.
> The dts file includes the clock head file, this patch goes through
> arm-soc is a good choice.
One way to avoid that problem is to split the clock header file into its
own patch and then duplicate that patch in two trees, one that goes
through arm-soc and one that goes through clk.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hello Stephen,
On 2015/5/20 4:35, Stephen Boyd wrote:
> On 05/15/15 19:54, Brent Wang wrote:
>>
>>>> How about just send this patch for review not the whole patch set in
>>>> next version?
>>>>
>>> Yes a single patch is fine. I take it you want the patch to go
>>> through arm-soc with some Ack from us?
>> Yes, exactly.
>> The dts file includes the clock head file, this patch goes through
>> arm-soc is a good choice.
>
> One way to avoid that problem is to split the clock header file into its
> own patch and then duplicate that patch in two trees, one that goes
> through arm-soc and one that goes through clk.
>
Thanks for your suggestion, I will talk about this with Hisilicon SoC
maintainer XuWei.
I have updated this patch based on your suggestion, could you help
review patch "[PATCH v6 5/6] clk: hi6220: Clock driver support for
Hisilicon hi6220 SoC"?
Thanks,
Bintian