This patchset adds following functions for tegra_soctherm driver:
1. add T210 support.
2. export debugfs to show some registers.
3. add thermtrip funciton.
4. add suspend/resume function.
Main changes from V8:
1. Rebase patches on Eduardo's fixes branch.
1. Fix some style warning.
Main changes from V7:
1. Split PM support patch into three smaller patches.
2. Few changes per Eduardo's comments.
Main changes from V6:
1. rebased patches on Eduardo's
[PATCH 00/13] thermal: convert users of thermal_zone_of_sensor_register to devm_
Main changes from V5:
1. Change to use linux thermal framework to implement
thermtrip funciton, per Rob's comment.
2. Add .set_trip_temp() in of-thermal driver, so that
we can set trips on hardware.
Main changes from V4:
1. Change description of devicetree binding per Rob's comment.
2. Call of_node_put to decrement refcount of the node.
Main changes from V3:
1. Change structures to "const" in chip specific files.
2. Minor changes per Thieery's comments.
Main changes from V2:
1. Fix build error in patch [1/11].
2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
Main changes from V1:
1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
2. Changes per Thieery's other comments.
The v8 series is in:
https://lkml.org/lkml/2016/3/16/228
The v7 series is in:
https://lkml.org/lkml/2016/3/10/752
The v6 series is in:
https://lkml.org/lkml/2016/2/22/66
The v5 series is in:
http://www.spinics.net/lists/linux-tegra/msg25079.html
The v4 series is in:
http://www.spinics.net/lists/linux-tegra/msg24972.html
The V3 series is in:
http://www.spinics.net/lists/linux-tegra/msg24911.html
The V2 series is in:
http://www.spinics.net/lists/linux-tegra/msg24901.html
The V1 series is in:
http://www.spinics.net/lists/linux-tegra/msg24808.html
Wei Ni (14):
thermal: tegra: move tegra thermal files into tegra directory
thermal: tegra: combine sensor group-related data
thermal: tegra: get rid of PDIV/HOTSPOT hack
thermal: tegra: split tegra_soctherm driver
thermal: tegra: add Tegra210 specific SOC_THERM driver
thermal: tegra: add a debugfs to show registers
thermal: of-thermal: allow setting trip_temp on hardware
of: add notes of critical trips for soctherm
thermal: tegra: add thermtrip function
thermal: tegra: handle clocks in one function
thermal: tegra: handle HW initialization in one funcotion
thermal: tegra: add PM support
arm64: tegra: add soctherm node for Tegra210
arm: tegra: set critical trips for Tegra124
.../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 18 +-
arch/arm/boot/dts/tegra124.dtsi | 60 ++
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 104 ++++
drivers/thermal/Kconfig | 12 +-
drivers/thermal/Makefile | 2 +-
drivers/thermal/of-thermal.c | 8 +
drivers/thermal/tegra/Kconfig | 13 +
drivers/thermal/tegra/Makefile | 5 +
drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
drivers/thermal/tegra/soctherm.c | 682 +++++++++++++++++++++
drivers/thermal/tegra/soctherm.h | 123 ++++
drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
drivers/thermal/tegra_soctherm.c | 463 --------------
include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
include/linux/thermal.h | 1 +
17 files changed, 1577 insertions(+), 489 deletions(-)
create mode 100644 drivers/thermal/tegra/Kconfig
create mode 100644 drivers/thermal/tegra/Makefile
create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
create mode 100644 drivers/thermal/tegra/soctherm.c
create mode 100644 drivers/thermal/tegra/soctherm.h
create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
delete mode 100644 drivers/thermal/tegra_soctherm.c
--
1.9.1
Move Tegra soctherm driver to tegra directory, it's easy to maintain
and add more new function support for Tegra platforms.
This will also help to split soctherm driver into common parts and
chip specific data related parts.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/Kconfig | 12 ++----------
drivers/thermal/Makefile | 2 +-
drivers/thermal/tegra/Kconfig | 13 +++++++++++++
drivers/thermal/tegra/Makefile | 1 +
.../thermal/{tegra_soctherm.c => tegra/tegra-soctherm.c} | 0
5 files changed, 17 insertions(+), 11 deletions(-)
create mode 100644 drivers/thermal/tegra/Kconfig
create mode 100644 drivers/thermal/tegra/Makefile
rename drivers/thermal/{tegra_soctherm.c => tegra/tegra-soctherm.c} (100%)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index c37eedc35a24..594748ee106f 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -260,16 +260,6 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
-config TEGRA_SOCTHERM
- tristate "Tegra SOCTHERM thermal management"
- depends on ARCH_TEGRA
- help
- Enable this option for integrated thermal management support on NVIDIA
- Tegra124 systems-on-chip. The driver supports four thermal zones
- (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
- zones to manage temperatures. This option is also required for the
- emergency thermal reset (thermtrip) feature to function.
-
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500 || COMPILE_TEST
@@ -397,6 +387,8 @@ depends on ARCH_STI && OF
source "drivers/thermal/st/Kconfig"
endmenu
+source "drivers/thermal/tegra/Kconfig"
+
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 8e9cbc3b5679..d64f7f707702 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -46,6 +46,6 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
obj-$(CONFIG_ST_THERMAL) += st/
-obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
+obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
diff --git a/drivers/thermal/tegra/Kconfig b/drivers/thermal/tegra/Kconfig
new file mode 100644
index 000000000000..bed898858d02
--- /dev/null
+++ b/drivers/thermal/tegra/Kconfig
@@ -0,0 +1,13 @@
+menu "NVIDIA Tegra thermal drivers"
+depends on ARCH_TEGRA
+
+config TEGRA_SOCTHERM
+ tristate "Tegra SOCTHERM thermal management"
+ help
+ Enable this option for integrated thermal management support on NVIDIA
+ Tegra124 systems-on-chip. The driver supports four thermal zones
+ (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
+ zones to manage temperatures. This option is also required for the
+ emergency thermal reset (thermtrip) feature to function.
+
+endmenu
diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
new file mode 100644
index 000000000000..d4dc4e7f279e
--- /dev/null
+++ b/drivers/thermal/tegra/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_TEGRA_SOCTHERM) += tegra-soctherm.o
diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c
similarity index 100%
rename from drivers/thermal/tegra_soctherm.c
rename to drivers/thermal/tegra/tegra-soctherm.c
--
1.9.1
Combine sensor group-related data structures into struct
tegra_tsensor_group. This provides a single location for
sensor group data storage.
More sensor group data will be added in subsequent patches.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/tegra-soctherm.c | 145 +++++++++++++++++++-----
include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
2 files changed, 119 insertions(+), 27 deletions(-)
diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c
index b78114f2ed67..7c1f41c0733a 100644
--- a/drivers/thermal/tegra/tegra-soctherm.c
+++ b/drivers/thermal/tegra/tegra-soctherm.c
@@ -28,6 +28,7 @@
#include <linux/thermal.h>
#include <soc/tegra/fuse.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
#define SENSOR_CONFIG0 0
#define SENSOR_CONFIG0_STOP BIT(0)
@@ -48,12 +49,24 @@
#define SENSOR_PDIV 0x1c0
#define SENSOR_PDIV_T124 0x8888
+#define SENSOR_PDIV_CPU_MASK (0xf << 12)
+#define SENSOR_PDIV_GPU_MASK (0xf << 8)
+#define SENSOR_PDIV_MEM_MASK (0xf << 4)
+#define SENSOR_PDIV_PLLX_MASK (0xf << 0)
+
#define SENSOR_HOTSPOT_OFF 0x1c4
#define SENSOR_HOTSPOT_OFF_T124 0x00060600
+#define SENSOR_HOTSPOT_CPU_MASK (0xff << 16)
+#define SENSOR_HOTSPOT_GPU_MASK (0xff << 8)
+#define SENSOR_HOTSPOT_MEM_MASK (0xff << 0)
+
#define SENSOR_TEMP1 0x1c8
+#define SENSOR_TEMP1_CPU_TEMP_MASK (0xffff << 16)
+#define SENSOR_TEMP1_GPU_TEMP_MASK 0xffff
#define SENSOR_TEMP2 0x1cc
+#define SENSOR_TEMP2_MEM_TEMP_MASK (0xffff << 16)
+#define SENSOR_TEMP2_PLLX_TEMP_MASK 0xffff
-#define SENSOR_TEMP_MASK 0xffff
#define READBACK_VALUE_MASK 0xff00
#define READBACK_VALUE_SHIFT 8
#define READBACK_ADD_HALF BIT(7)
@@ -77,8 +90,36 @@
#define NOMINAL_CALIB_FT_T124 105
#define NOMINAL_CALIB_CP_T124 25
+/* get val from register(r) mask bits(m) */
+#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
+/* set val(v) to mask bits(m) of register(r) */
+#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
+ (((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
+
+/**
+ * struct tegra_tsensor_group - SOC_THERM sensor group data
+ * @name: short name of the temperature sensor group
+ * @id: numeric ID of the temperature sensor group
+ * @sensor_temp_offset: offset of the SENSOR_TEMP* register
+ * @sensor_temp_mask: bit mask for this sensor group in SENSOR_TEMP* register
+ * @pdiv: the sensor count post-divider to use during runtime
+ * @pdiv_ate: the sensor count post-divider used during automated test
+ * @pdiv_mask: register bitfield mask for the PDIV field for this sensor
+ * @pllx_hotspot_diff: hotspot offset from the PLLX sensor, must be 0 for
+ PLLX sensor group
+ * @pllx_hotspot_mask: register bitfield mask for the HOTSPOT field
+ */
+struct tegra_tsensor_group {
+ const char *name;
+ u8 id;
+ u16 sensor_temp_offset;
+ u32 sensor_temp_mask;
+ u32 pdiv, pdiv_ate, pdiv_mask;
+ u32 pllx_hotspot_diff, pllx_hotspot_mask;
+};
+
struct tegra_tsensor_configuration {
- u32 tall, tsample, tiddq_en, ten_count, pdiv, tsample_ate, pdiv_ate;
+ u32 tall, tiddq_en, ten_count, tsample, tsample_ate;
};
struct tegra_tsensor {
@@ -86,21 +127,74 @@ struct tegra_tsensor {
u32 base, calib_fuse_offset;
/* Correction values used to modify values read from calibration fuses */
s32 fuse_corr_alpha, fuse_corr_beta;
+ const struct tegra_tsensor_group *group;
};
struct tegra_thermctl_zone {
void __iomem *reg;
- unsigned int shift;
+ u32 mask;
};
static const struct tegra_tsensor_configuration t124_tsensor_config = {
.tall = 16300,
- .tsample = 120,
.tiddq_en = 1,
.ten_count = 1,
- .pdiv = 8,
+ .tsample = 120,
.tsample_ate = 480,
- .pdiv_ate = 8
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
+ .id = TEGRA124_SOCTHERM_SENSOR_CPU,
+ .name = "cpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_CPU_MASK,
+ .pllx_hotspot_diff = 10,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
+ .id = TEGRA124_SOCTHERM_SENSOR_GPU,
+ .name = "gpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_GPU_MASK,
+ .pllx_hotspot_diff = 5,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
+ .id = TEGRA124_SOCTHERM_SENSOR_PLLX,
+ .name = "pll",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+ .pllx_hotspot_diff = 0,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
+ .id = TEGRA124_SOCTHERM_SENSOR_MEM,
+ .name = "mem",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_MEM_MASK,
+};
+
+static const struct tegra_tsensor_group *
+tegra124_tsensor_groups[TEGRA124_SOCTHERM_SENSOR_NUM] = {
+ &tegra124_tsensor_group_cpu,
+ &tegra124_tsensor_group_gpu,
+ &tegra124_tsensor_group_pll,
+ &tegra124_tsensor_group_mem,
};
static const struct tegra_tsensor t124_tsensors[] = {
@@ -110,6 +204,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x098,
.fuse_corr_alpha = 1135400,
.fuse_corr_beta = -6266900,
+ .group = &tegra124_tsensor_group_cpu,
},
{
.config = &t124_tsensor_config,
@@ -117,6 +212,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x084,
.fuse_corr_alpha = 1122220,
.fuse_corr_beta = -5700700,
+ .group = &tegra124_tsensor_group_cpu,
},
{
.config = &t124_tsensor_config,
@@ -124,6 +220,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x088,
.fuse_corr_alpha = 1127000,
.fuse_corr_beta = -6768200,
+ .group = &tegra124_tsensor_group_cpu,
},
{
.config = &t124_tsensor_config,
@@ -131,6 +228,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x12c,
.fuse_corr_alpha = 1110900,
.fuse_corr_beta = -6232000,
+ .group = &tegra124_tsensor_group_cpu,
},
{
.config = &t124_tsensor_config,
@@ -138,6 +236,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x158,
.fuse_corr_alpha = 1122300,
.fuse_corr_beta = -5936400,
+ .group = &tegra124_tsensor_group_mem,
},
{
.config = &t124_tsensor_config,
@@ -145,6 +244,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x15c,
.fuse_corr_alpha = 1145700,
.fuse_corr_beta = -7124600,
+ .group = &tegra124_tsensor_group_mem,
},
{
.config = &t124_tsensor_config,
@@ -152,6 +252,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x154,
.fuse_corr_alpha = 1120100,
.fuse_corr_beta = -6000500,
+ .group = &tegra124_tsensor_group_gpu,
},
{
.config = &t124_tsensor_config,
@@ -159,6 +260,7 @@ static const struct tegra_tsensor t124_tsensors[] = {
.calib_fuse_offset = 0x160,
.fuse_corr_alpha = 1106500,
.fuse_corr_beta = -6729300,
+ .group = &tegra124_tsensor_group_pll,
},
};
@@ -167,8 +269,6 @@ struct tegra_soctherm {
struct clk *clock_tsensor;
struct clk *clock_soctherm;
void __iomem *regs;
-
-#define ZONE_NUMBER 4
};
struct tsensor_shared_calibration {
@@ -237,8 +337,8 @@ calculate_tsensor_calibration(const struct tegra_tsensor *sensor,
delta_sens = actual_tsensor_ft - actual_tsensor_cp;
delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
- mult = sensor->config->pdiv * sensor->config->tsample_ate;
- div = sensor->config->tsample * sensor->config->pdiv_ate;
+ mult = sensor->group->pdiv * sensor->config->tsample_ate;
+ div = sensor->config->tsample * sensor->group->pdiv_ate;
therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult,
(s64) delta_sens * div);
@@ -311,7 +411,8 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
struct tegra_thermctl_zone *zone = data;
u32 val;
- val = (readl(zone->reg) >> zone->shift) & SENSOR_TEMP_MASK;
+ val = readl(zone->reg);
+ val = REG_GET_MASK(val, zone->mask);
*out_temp = translate_temp(val);
return 0;
@@ -327,18 +428,6 @@ static const struct of_device_id tegra_soctherm_of_match[] = {
};
MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
-struct thermctl_zone_desc {
- unsigned int offset;
- unsigned int shift;
-};
-
-static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = {
- { SENSOR_TEMP1, 16 },
- { SENSOR_TEMP2, 16 },
- { SENSOR_TEMP1, 0 },
- { SENSOR_TEMP2, 0 }
-};
-
static int tegra_soctherm_probe(struct platform_device *pdev)
{
struct tegra_soctherm *tegra;
@@ -349,6 +438,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
int err;
const struct tegra_tsensor *tsensors = t124_tsensors;
+ const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups;
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
if (!tegra)
@@ -408,7 +498,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
/* Initialize thermctl sensors */
- for (i = 0; i < ZONE_NUMBER; ++i) {
+ for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) {
struct tegra_thermctl_zone *zone =
devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
if (!zone) {
@@ -416,10 +506,11 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
goto disable_clocks;
}
- zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset;
- zone->shift = t124_thermctl_temp_zones[i].shift;
+ zone->reg = tegra->regs + ttgs[i]->sensor_temp_offset;
+ zone->mask = ttgs[i]->sensor_temp_mask;
- z = devm_thermal_zone_of_sensor_register(&pdev->dev, i, zone,
+ z = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ ttgs[i]->id, zone,
&tegra_of_thermal_ops);
if (IS_ERR(z)) {
err = PTR_ERR(z);
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
index 85aaf66690f9..729ab9fc325e 100644
--- a/include/dt-bindings/thermal/tegra124-soctherm.h
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -9,5 +9,6 @@
#define TEGRA124_SOCTHERM_SENSOR_MEM 1
#define TEGRA124_SOCTHERM_SENSOR_GPU 2
#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
+#define TEGRA124_SOCTHERM_SENSOR_NUM 4
#endif
--
1.9.1
Get rid of T124-specific PDIV/HOTSPOT hack.
tegra-soctherm.c contained a hack to set the SENSOR_PDIV and
SENSOR_HOTSPOT_OFFSET registers - it just did two writes of
T124-specific opaque values. Convert these into a form that can be
substituted on a per-chip basis, and into structure fields that have
at least some independent meaning.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/tegra-soctherm.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c
index 7c1f41c0733a..e486d034adb4 100644
--- a/drivers/thermal/tegra/tegra-soctherm.c
+++ b/drivers/thermal/tegra/tegra-soctherm.c
@@ -48,14 +48,12 @@
#define SENSOR_CONFIG2_THERMB_SHIFT 0
#define SENSOR_PDIV 0x1c0
-#define SENSOR_PDIV_T124 0x8888
#define SENSOR_PDIV_CPU_MASK (0xf << 12)
#define SENSOR_PDIV_GPU_MASK (0xf << 8)
#define SENSOR_PDIV_MEM_MASK (0xf << 4)
#define SENSOR_PDIV_PLLX_MASK (0xf << 0)
#define SENSOR_HOTSPOT_OFF 0x1c4
-#define SENSOR_HOTSPOT_OFF_T124 0x00060600
#define SENSOR_HOTSPOT_CPU_MASK (0xff << 16)
#define SENSOR_HOTSPOT_GPU_MASK (0xff << 8)
#define SENSOR_HOTSPOT_MEM_MASK (0xff << 0)
@@ -436,6 +434,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
struct resource *res;
unsigned int i;
int err;
+ u32 pdiv, hotspot;
const struct tegra_tsensor *tsensors = t124_tsensors;
const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups;
@@ -493,8 +492,20 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
goto disable_clocks;
}
- writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
- writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
+ /* Program pdiv and hotspot offsets per THERM */
+ pdiv = readl(tegra->regs + SENSOR_PDIV);
+ hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
+ for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) {
+ pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
+ ttgs[i]->pdiv);
+ /* hotspot offset from PLLX, doesn't need to configure PLLX */
+ if (ttgs[i]->id != TEGRA124_SOCTHERM_SENSOR_PLLX)
+ hotspot = REG_SET_MASK(hotspot,
+ ttgs[i]->pllx_hotspot_mask,
+ ttgs[i]->pllx_hotspot_diff);
+ }
+ writel(pdiv, tegra->regs + SENSOR_PDIV);
+ writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
/* Initialize thermctl sensors */
--
1.9.1
Split most of the Tegra124 data and code into a Tegra124-specific
file.
Split most of the fuse-related code into a fuse-related source file.
This is in preparation for adding a Tegra210-specific driver in a
future patch.
Beyond the maintainability improvements, this is intended to separate
chip-specific ATE and characterization-related hacks into chip-specific
files, in the hopes that they won't pollute code for other chips.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/Kconfig | 2 +-
drivers/thermal/tegra/Makefile | 3 +
drivers/thermal/tegra/soctherm-fuse.c | 158 +++++++++
drivers/thermal/tegra/soctherm.c | 310 ++++++++++++++++
drivers/thermal/tegra/soctherm.h | 110 ++++++
drivers/thermal/tegra/tegra-soctherm.c | 565 ------------------------------
drivers/thermal/tegra/tegra124-soctherm.c | 172 +++++++++
7 files changed, 754 insertions(+), 566 deletions(-)
create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
create mode 100644 drivers/thermal/tegra/soctherm.c
create mode 100644 drivers/thermal/tegra/soctherm.h
delete mode 100644 drivers/thermal/tegra/tegra-soctherm.c
create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
diff --git a/drivers/thermal/tegra/Kconfig b/drivers/thermal/tegra/Kconfig
index bed898858d02..cec586ec7e4b 100644
--- a/drivers/thermal/tegra/Kconfig
+++ b/drivers/thermal/tegra/Kconfig
@@ -5,7 +5,7 @@ config TEGRA_SOCTHERM
tristate "Tegra SOCTHERM thermal management"
help
Enable this option for integrated thermal management support on NVIDIA
- Tegra124 systems-on-chip. The driver supports four thermal zones
+ Tegra systems-on-chip. The driver supports four thermal zones
(CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
zones to manage temperatures. This option is also required for the
emergency thermal reset (thermtrip) feature to function.
diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
index d4dc4e7f279e..d5fb15377b97 100644
--- a/drivers/thermal/tegra/Makefile
+++ b/drivers/thermal/tegra/Makefile
@@ -1 +1,4 @@
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra-soctherm.o
+
+tegra-soctherm-y := soctherm.o soctherm-fuse.o
+tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124-soctherm.o
diff --git a/drivers/thermal/tegra/soctherm-fuse.c b/drivers/thermal/tegra/soctherm-fuse.c
new file mode 100644
index 000000000000..931c299ab0e8
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm-fuse.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/tegra/fuse.h>
+
+#include "soctherm.h"
+
+#define NOMINAL_CALIB_FT 105
+#define NOMINAL_CALIB_CP 25
+
+#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13)
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13
+
+#define FUSE_TSENSOR_COMMON 0x180
+
+/*
+ * Tegra12x, etc:
+ * FUSE_TSENSOR_COMMON:
+ * 3 2 1 0
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |-----------| SHFT_FT | BASE_FT | BASE_CP |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * FUSE_SPARE_REALIGNMENT_REG:
+ * 3 2 1 0
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |---------------------------------------------------| SHIFT_CP |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ */
+
+#define CALIB_COEFFICIENT 1000000LL
+
+/**
+ * div64_s64_precise() - wrapper for div64_s64()
+ * @a: the dividend
+ * @b: the divisor
+ *
+ * Implements division with fairly accurate rounding instead of truncation by
+ * shifting the dividend to the left by 16 so that the quotient has a
+ * much higher precision.
+ *
+ * Return: the quotient of a / b.
+ */
+static s64 div64_s64_precise(s64 a, s32 b)
+{
+ s64 r, al;
+
+ /* Scale up for increased precision division */
+ al = a << 16;
+
+ r = div64_s64(al * 2 + 1, 2 * b);
+ return r >> 16;
+}
+
+int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
+ struct tsensor_shared_calib *shared)
+{
+ u32 val;
+ s32 shifted_cp, shifted_ft;
+ int err;
+
+ err = tegra_fuse_readl(FUSE_TSENSOR_COMMON, &val);
+ if (err)
+ return err;
+
+ shared->base_cp = (val & tfuse->fuse_base_cp_mask) >>
+ tfuse->fuse_base_cp_shift;
+ shared->base_ft = (val & tfuse->fuse_base_ft_mask) >>
+ tfuse->fuse_base_ft_shift;
+
+ shifted_ft = (val & tfuse->fuse_shift_ft_mask) >>
+ tfuse->fuse_shift_ft_shift;
+ shifted_ft = sign_extend32(shifted_ft, 4);
+
+ if (tfuse->fuse_spare_realignment) {
+ err = tegra_fuse_readl(tfuse->fuse_spare_realignment, &val);
+ if (err)
+ return err;
+ }
+
+ shifted_cp = sign_extend32(val, 5);
+
+ shared->actual_temp_cp = 2 * NOMINAL_CALIB_CP + shifted_cp;
+ shared->actual_temp_ft = 2 * NOMINAL_CALIB_FT + shifted_ft;
+
+ return 0;
+}
+
+int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
+ const struct tsensor_shared_calib *shared,
+ u32 *calibration)
+{
+ const struct tegra_tsensor_group *sensor_group;
+ u32 val, calib;
+ s32 actual_tsensor_ft, actual_tsensor_cp;
+ s32 delta_sens, delta_temp;
+ s32 mult, div;
+ s16 therma, thermb;
+ s64 temp;
+ int err;
+
+ sensor_group = sensor->group;
+
+ err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
+ if (err)
+ return err;
+
+ actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
+ val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK) >>
+ FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
+ actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
+
+ delta_sens = actual_tsensor_ft - actual_tsensor_cp;
+ delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
+
+ mult = sensor_group->pdiv * sensor->config->tsample_ate;
+ div = sensor->config->tsample * sensor_group->pdiv_ate;
+
+ temp = (s64)delta_temp * (1LL << 13) * mult;
+ therma = div64_s64_precise(temp, (s64)delta_sens * div);
+
+ temp = ((s64)actual_tsensor_ft * shared->actual_temp_cp) -
+ ((s64)actual_tsensor_cp * shared->actual_temp_ft);
+ thermb = div64_s64_precise(temp, delta_sens);
+
+ temp = (s64)therma * sensor->fuse_corr_alpha;
+ therma = div64_s64_precise(temp, CALIB_COEFFICIENT);
+
+ temp = (s64)thermb * sensor->fuse_corr_alpha + sensor->fuse_corr_beta;
+ thermb = div64_s64_precise(temp, CALIB_COEFFICIENT);
+
+ calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
+ ((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
+
+ *calibration = calib;
+
+ return 0;
+}
+
+MODULE_AUTHOR("Wei Ni <[email protected]>");
+MODULE_DESCRIPTION("Tegra SOCTHERM fuse management");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
new file mode 100644
index 000000000000..d9b23cded69f
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Mikko Perttunen <[email protected]>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+#define SENSOR_CONFIG0 0
+#define SENSOR_CONFIG0_STOP BIT(0)
+#define SENSOR_CONFIG0_TALL_SHIFT 8
+#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
+#define SENSOR_CONFIG0_OVER BIT(3)
+#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
+
+#define SENSOR_CONFIG1 4
+#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
+#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
+#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
+#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
+
+/*
+ * SENSOR_CONFIG2 is defined in soctherm.h
+ * because, it will be used by tegra_soctherm_fuse.c
+ */
+
+#define READBACK_VALUE_MASK 0xff00
+#define READBACK_VALUE_SHIFT 8
+#define READBACK_ADD_HALF BIT(7)
+#define READBACK_NEGATE BIT(0)
+
+/* get val from register(r) mask bits(m) */
+#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
+/* set val(v) to mask bits(m) of register(r) */
+#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
+ (((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
+
+struct tegra_thermctl_zone {
+ void __iomem *reg;
+ u32 mask;
+};
+
+struct tegra_soctherm {
+ struct reset_control *reset;
+ struct clk *clock_tsensor;
+ struct clk *clock_soctherm;
+ void __iomem *regs;
+
+ u32 *calib;
+ struct tegra_soctherm_soc *soc;
+};
+
+static int enable_tsensor(struct tegra_soctherm *tegra,
+ unsigned int i,
+ const struct tsensor_shared_calib *shared)
+{
+ const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
+ void __iomem *base = tegra->regs + sensor->base;
+ u32 *calib = &tegra->calib[i];
+ unsigned int val;
+ int err;
+
+ err = tegra_calc_tsensor_calib(sensor, shared, calib);
+ if (err)
+ return err;
+
+ val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
+ writel(val, base + SENSOR_CONFIG0);
+
+ val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
+ val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
+ val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
+ val |= SENSOR_CONFIG1_TEMP_ENABLE;
+ writel(val, base + SENSOR_CONFIG1);
+
+ writel(*calib, base + SENSOR_CONFIG2);
+
+ return 0;
+}
+
+/*
+ * Translate from soctherm readback format to millicelsius.
+ * The soctherm readback format in bits is as follows:
+ * TTTTTTTT H______N
+ * where T's contain the temperature in Celsius,
+ * H denotes an addition of 0.5 Celsius and N denotes negation
+ * of the final value.
+ */
+static int translate_temp(u16 val)
+{
+ int t;
+
+ t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
+ if (val & READBACK_ADD_HALF)
+ t += 500;
+ if (val & READBACK_NEGATE)
+ t *= -1;
+
+ return t;
+}
+
+static int tegra_thermctl_get_temp(void *data, int *out_temp)
+{
+ struct tegra_thermctl_zone *zone = data;
+ u32 val;
+
+ val = readl(zone->reg);
+ val = REG_GET_MASK(val, zone->mask);
+ *out_temp = translate_temp(val);
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
+ .get_temp = tegra_thermctl_get_temp,
+};
+
+static const struct of_device_id tegra_soctherm_of_match[] = {
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+ {
+ .compatible = "nvidia,tegra124-soctherm",
+ .data = &tegra124_soctherm,
+ },
+#endif
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
+
+static int tegra_soctherm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct tegra_soctherm *tegra;
+ struct thermal_zone_device *z;
+ struct tsensor_shared_calib shared_calib;
+ struct resource *res;
+ struct tegra_soctherm_soc *soc;
+ unsigned int i;
+ int err;
+ u32 pdiv, hotspot;
+
+ match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
+ if (!match)
+ return -ENODEV;
+
+ soc = (struct tegra_soctherm_soc *)match->data;
+ if (soc->num_ttgs > TEGRA124_SOCTHERM_SENSOR_NUM)
+ return -EINVAL;
+
+ tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ dev_set_drvdata(&pdev->dev, tegra);
+
+ tegra->soc = soc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tegra->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra->regs))
+ return PTR_ERR(tegra->regs);
+
+ tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
+ if (IS_ERR(tegra->reset)) {
+ dev_err(&pdev->dev, "can't get soctherm reset\n");
+ return PTR_ERR(tegra->reset);
+ }
+
+ tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
+ if (IS_ERR(tegra->clock_tsensor)) {
+ dev_err(&pdev->dev, "can't get tsensor clock\n");
+ return PTR_ERR(tegra->clock_tsensor);
+ }
+
+ tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
+ if (IS_ERR(tegra->clock_soctherm)) {
+ dev_err(&pdev->dev, "can't get soctherm clock\n");
+ return PTR_ERR(tegra->clock_soctherm);
+ }
+
+ reset_control_assert(tegra->reset);
+
+ err = clk_prepare_enable(tegra->clock_soctherm);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(tegra->clock_tsensor);
+ if (err) {
+ clk_disable_unprepare(tegra->clock_soctherm);
+ return err;
+ }
+
+ reset_control_deassert(tegra->reset);
+
+ /* Initialize raw sensors */
+
+ tegra->calib = devm_kzalloc(&pdev->dev,
+ sizeof(u32) * soc->num_tsensors,
+ GFP_KERNEL);
+ if (!tegra->calib) {
+ err = -ENOMEM;
+ goto disable_clocks;
+ }
+
+ err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
+ if (err)
+ goto disable_clocks;
+
+ for (i = 0; i < soc->num_tsensors; ++i) {
+ err = enable_tsensor(tegra, i, &shared_calib);
+ if (err)
+ goto disable_clocks;
+ }
+
+ /* Program pdiv and hotspot offsets per THERM */
+ pdiv = readl(tegra->regs + SENSOR_PDIV);
+ hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
+ for (i = 0; i < soc->num_ttgs; ++i) {
+ pdiv = REG_SET_MASK(pdiv, soc->ttgs[i]->pdiv_mask,
+ soc->ttgs[i]->pdiv);
+ /* hotspot offset from PLLX, doesn't need to configure PLLX */
+ if (soc->ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
+ continue;
+ hotspot = REG_SET_MASK(hotspot,
+ soc->ttgs[i]->pllx_hotspot_mask,
+ soc->ttgs[i]->pllx_hotspot_diff);
+ }
+ writel(pdiv, tegra->regs + SENSOR_PDIV);
+ writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
+
+ /* Initialize thermctl sensors */
+
+ for (i = 0; i < soc->num_ttgs; ++i) {
+ struct tegra_thermctl_zone *zone =
+ devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
+ if (!zone) {
+ err = -ENOMEM;
+ goto disable_clocks;
+ }
+
+ zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
+ zone->mask = soc->ttgs[i]->sensor_temp_mask;
+
+ z = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ soc->ttgs[i]->id, zone,
+ &tegra_of_thermal_ops);
+ if (IS_ERR(z)) {
+ err = PTR_ERR(z);
+ dev_err(&pdev->dev, "failed to register sensor: %d\n",
+ err);
+ goto disable_clocks;
+ }
+ }
+
+ return 0;
+
+disable_clocks:
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+
+ return err;
+}
+
+static int tegra_soctherm_remove(struct platform_device *pdev)
+{
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+
+ return 0;
+}
+
+static struct platform_driver tegra_soctherm_driver = {
+ .probe = tegra_soctherm_probe,
+ .remove = tegra_soctherm_remove,
+ .driver = {
+ .name = "tegra_soctherm",
+ .of_match_table = tegra_soctherm_of_match,
+ },
+};
+module_platform_driver(tegra_soctherm_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <[email protected]>");
+MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
new file mode 100644
index 000000000000..f80ee1492ddb
--- /dev/null
+++ b/drivers/thermal/tegra/soctherm.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
+#define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
+
+#define SENSOR_CONFIG2 8
+#define SENSOR_CONFIG2_THERMA_SHIFT 16
+#define SENSOR_CONFIG2_THERMB_SHIFT 0
+
+#define SENSOR_PDIV 0x1c0
+#define SENSOR_PDIV_CPU_MASK (0xf << 12)
+#define SENSOR_PDIV_GPU_MASK (0xf << 8)
+#define SENSOR_PDIV_MEM_MASK (0xf << 4)
+#define SENSOR_PDIV_PLLX_MASK (0xf << 0)
+
+#define SENSOR_HOTSPOT_OFF 0x1c4
+#define SENSOR_HOTSPOT_CPU_MASK (0xff << 16)
+#define SENSOR_HOTSPOT_GPU_MASK (0xff << 8)
+#define SENSOR_HOTSPOT_MEM_MASK (0xff << 0)
+
+#define SENSOR_TEMP1 0x1c8
+#define SENSOR_TEMP1_CPU_TEMP_MASK (0xffff << 16)
+#define SENSOR_TEMP1_GPU_TEMP_MASK 0xffff
+#define SENSOR_TEMP2 0x1cc
+#define SENSOR_TEMP2_MEM_TEMP_MASK (0xffff << 16)
+#define SENSOR_TEMP2_PLLX_TEMP_MASK 0xffff
+
+/**
+ * struct tegra_tsensor_group - SOC_THERM sensor group data
+ * @name: short name of the temperature sensor group
+ * @id: numeric ID of the temperature sensor group
+ * @sensor_temp_offset: offset of the SENSOR_TEMP* register
+ * @sensor_temp_mask: bit mask for this sensor group in SENSOR_TEMP* register
+ * @pdiv: the sensor count post-divider to use during runtime
+ * @pdiv_ate: the sensor count post-divider used during automated test
+ * @pdiv_mask: register bitfield mask for the PDIV field for this sensor
+ * @pllx_hotspot_diff: hotspot offset from the PLLX sensor, must be 0 for
+ PLLX sensor group
+ * @pllx_hotspot_mask: register bitfield mask for the HOTSPOT field
+ */
+struct tegra_tsensor_group {
+ const char *name;
+ u8 id;
+ u16 sensor_temp_offset;
+ u32 sensor_temp_mask;
+ u32 pdiv, pdiv_ate, pdiv_mask;
+ u32 pllx_hotspot_diff, pllx_hotspot_mask;
+};
+
+struct tegra_tsensor_configuration {
+ u32 tall, tiddq_en, ten_count, pdiv, pdiv_ate, tsample, tsample_ate;
+};
+
+struct tegra_tsensor {
+ const char *name;
+ const u32 base;
+ const struct tegra_tsensor_configuration *config;
+ const u32 calib_fuse_offset;
+ /*
+ * Correction values used to modify values read from
+ * calibration fuses
+ */
+ const s32 fuse_corr_alpha, fuse_corr_beta;
+ const struct tegra_tsensor_group *group;
+};
+
+struct tegra_soctherm_fuse {
+ u32 fuse_base_cp_mask, fuse_base_cp_shift;
+ u32 fuse_base_ft_mask, fuse_base_ft_shift;
+ u32 fuse_shift_ft_mask, fuse_shift_ft_shift;
+ u32 fuse_spare_realignment;
+};
+
+struct tsensor_shared_calib {
+ u32 base_cp, base_ft;
+ u32 actual_temp_cp, actual_temp_ft;
+};
+
+struct tegra_soctherm_soc {
+ const struct tegra_tsensor *tsensors;
+ const unsigned int num_tsensors;
+ const struct tegra_tsensor_group **ttgs;
+ const unsigned int num_ttgs;
+ const struct tegra_soctherm_fuse *tfuse;
+};
+
+int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
+ struct tsensor_shared_calib *shared);
+int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
+ const struct tsensor_shared_calib *shared,
+ u32 *calib);
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+extern const struct tegra_soctherm_soc tegra124_soctherm;
+#endif
+
+#endif
+
diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c
deleted file mode 100644
index e486d034adb4..000000000000
--- a/drivers/thermal/tegra/tegra-soctherm.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
- *
- * Author:
- * Mikko Perttunen <[email protected]>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/reset.h>
-#include <linux/thermal.h>
-
-#include <soc/tegra/fuse.h>
-#include <dt-bindings/thermal/tegra124-soctherm.h>
-
-#define SENSOR_CONFIG0 0
-#define SENSOR_CONFIG0_STOP BIT(0)
-#define SENSOR_CONFIG0_TALL_SHIFT 8
-#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
-#define SENSOR_CONFIG0_OVER BIT(3)
-#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
-
-#define SENSOR_CONFIG1 4
-#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
-#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
-#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
-#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
-
-#define SENSOR_CONFIG2 8
-#define SENSOR_CONFIG2_THERMA_SHIFT 16
-#define SENSOR_CONFIG2_THERMB_SHIFT 0
-
-#define SENSOR_PDIV 0x1c0
-#define SENSOR_PDIV_CPU_MASK (0xf << 12)
-#define SENSOR_PDIV_GPU_MASK (0xf << 8)
-#define SENSOR_PDIV_MEM_MASK (0xf << 4)
-#define SENSOR_PDIV_PLLX_MASK (0xf << 0)
-
-#define SENSOR_HOTSPOT_OFF 0x1c4
-#define SENSOR_HOTSPOT_CPU_MASK (0xff << 16)
-#define SENSOR_HOTSPOT_GPU_MASK (0xff << 8)
-#define SENSOR_HOTSPOT_MEM_MASK (0xff << 0)
-
-#define SENSOR_TEMP1 0x1c8
-#define SENSOR_TEMP1_CPU_TEMP_MASK (0xffff << 16)
-#define SENSOR_TEMP1_GPU_TEMP_MASK 0xffff
-#define SENSOR_TEMP2 0x1cc
-#define SENSOR_TEMP2_MEM_TEMP_MASK (0xffff << 16)
-#define SENSOR_TEMP2_PLLX_TEMP_MASK 0xffff
-
-#define READBACK_VALUE_MASK 0xff00
-#define READBACK_VALUE_SHIFT 8
-#define READBACK_ADD_HALF BIT(7)
-#define READBACK_NEGATE BIT(0)
-
-#define FUSE_TSENSOR8_CALIB 0x180
-#define FUSE_SPARE_REALIGNMENT_REG_0 0x1fc
-
-#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff
-#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13)
-#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13
-
-#define FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK 0x3ff
-#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK (0x7ff << 10)
-#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT 10
-
-#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_CP_MASK 0x3f
-#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK (0x1f << 21)
-#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT 21
-
-#define NOMINAL_CALIB_FT_T124 105
-#define NOMINAL_CALIB_CP_T124 25
-
-/* get val from register(r) mask bits(m) */
-#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
-/* set val(v) to mask bits(m) of register(r) */
-#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
- (((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
-
-/**
- * struct tegra_tsensor_group - SOC_THERM sensor group data
- * @name: short name of the temperature sensor group
- * @id: numeric ID of the temperature sensor group
- * @sensor_temp_offset: offset of the SENSOR_TEMP* register
- * @sensor_temp_mask: bit mask for this sensor group in SENSOR_TEMP* register
- * @pdiv: the sensor count post-divider to use during runtime
- * @pdiv_ate: the sensor count post-divider used during automated test
- * @pdiv_mask: register bitfield mask for the PDIV field for this sensor
- * @pllx_hotspot_diff: hotspot offset from the PLLX sensor, must be 0 for
- PLLX sensor group
- * @pllx_hotspot_mask: register bitfield mask for the HOTSPOT field
- */
-struct tegra_tsensor_group {
- const char *name;
- u8 id;
- u16 sensor_temp_offset;
- u32 sensor_temp_mask;
- u32 pdiv, pdiv_ate, pdiv_mask;
- u32 pllx_hotspot_diff, pllx_hotspot_mask;
-};
-
-struct tegra_tsensor_configuration {
- u32 tall, tiddq_en, ten_count, tsample, tsample_ate;
-};
-
-struct tegra_tsensor {
- const struct tegra_tsensor_configuration *config;
- u32 base, calib_fuse_offset;
- /* Correction values used to modify values read from calibration fuses */
- s32 fuse_corr_alpha, fuse_corr_beta;
- const struct tegra_tsensor_group *group;
-};
-
-struct tegra_thermctl_zone {
- void __iomem *reg;
- u32 mask;
-};
-
-static const struct tegra_tsensor_configuration t124_tsensor_config = {
- .tall = 16300,
- .tiddq_en = 1,
- .ten_count = 1,
- .tsample = 120,
- .tsample_ate = 480,
-};
-
-static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
- .id = TEGRA124_SOCTHERM_SENSOR_CPU,
- .name = "cpu",
- .sensor_temp_offset = SENSOR_TEMP1,
- .sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
- .pdiv = 8,
- .pdiv_ate = 8,
- .pdiv_mask = SENSOR_PDIV_CPU_MASK,
- .pllx_hotspot_diff = 10,
- .pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
-};
-
-static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
- .id = TEGRA124_SOCTHERM_SENSOR_GPU,
- .name = "gpu",
- .sensor_temp_offset = SENSOR_TEMP1,
- .sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
- .pdiv = 8,
- .pdiv_ate = 8,
- .pdiv_mask = SENSOR_PDIV_GPU_MASK,
- .pllx_hotspot_diff = 5,
- .pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
-};
-
-static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
- .id = TEGRA124_SOCTHERM_SENSOR_PLLX,
- .name = "pll",
- .sensor_temp_offset = SENSOR_TEMP2,
- .sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
- .pdiv = 8,
- .pdiv_ate = 8,
- .pdiv_mask = SENSOR_PDIV_PLLX_MASK,
- .pllx_hotspot_diff = 0,
- .pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
-};
-
-static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
- .id = TEGRA124_SOCTHERM_SENSOR_MEM,
- .name = "mem",
- .sensor_temp_offset = SENSOR_TEMP2,
- .sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
- .pdiv = 8,
- .pdiv_ate = 8,
- .pdiv_mask = SENSOR_PDIV_MEM_MASK,
-};
-
-static const struct tegra_tsensor_group *
-tegra124_tsensor_groups[TEGRA124_SOCTHERM_SENSOR_NUM] = {
- &tegra124_tsensor_group_cpu,
- &tegra124_tsensor_group_gpu,
- &tegra124_tsensor_group_pll,
- &tegra124_tsensor_group_mem,
-};
-
-static const struct tegra_tsensor t124_tsensors[] = {
- {
- .config = &t124_tsensor_config,
- .base = 0xc0,
- .calib_fuse_offset = 0x098,
- .fuse_corr_alpha = 1135400,
- .fuse_corr_beta = -6266900,
- .group = &tegra124_tsensor_group_cpu,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0xe0,
- .calib_fuse_offset = 0x084,
- .fuse_corr_alpha = 1122220,
- .fuse_corr_beta = -5700700,
- .group = &tegra124_tsensor_group_cpu,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0x100,
- .calib_fuse_offset = 0x088,
- .fuse_corr_alpha = 1127000,
- .fuse_corr_beta = -6768200,
- .group = &tegra124_tsensor_group_cpu,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0x120,
- .calib_fuse_offset = 0x12c,
- .fuse_corr_alpha = 1110900,
- .fuse_corr_beta = -6232000,
- .group = &tegra124_tsensor_group_cpu,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0x140,
- .calib_fuse_offset = 0x158,
- .fuse_corr_alpha = 1122300,
- .fuse_corr_beta = -5936400,
- .group = &tegra124_tsensor_group_mem,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0x160,
- .calib_fuse_offset = 0x15c,
- .fuse_corr_alpha = 1145700,
- .fuse_corr_beta = -7124600,
- .group = &tegra124_tsensor_group_mem,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0x180,
- .calib_fuse_offset = 0x154,
- .fuse_corr_alpha = 1120100,
- .fuse_corr_beta = -6000500,
- .group = &tegra124_tsensor_group_gpu,
- },
- {
- .config = &t124_tsensor_config,
- .base = 0x1a0,
- .calib_fuse_offset = 0x160,
- .fuse_corr_alpha = 1106500,
- .fuse_corr_beta = -6729300,
- .group = &tegra124_tsensor_group_pll,
- },
-};
-
-struct tegra_soctherm {
- struct reset_control *reset;
- struct clk *clock_tsensor;
- struct clk *clock_soctherm;
- void __iomem *regs;
-};
-
-struct tsensor_shared_calibration {
- u32 base_cp, base_ft;
- u32 actual_temp_cp, actual_temp_ft;
-};
-
-static int calculate_shared_calibration(struct tsensor_shared_calibration *r)
-{
- u32 val, shifted_cp, shifted_ft;
- int err;
-
- err = tegra_fuse_readl(FUSE_TSENSOR8_CALIB, &val);
- if (err)
- return err;
- r->base_cp = val & FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK;
- r->base_ft = (val & FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK)
- >> FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT;
- val = ((val & FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK)
- >> FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT);
- shifted_ft = sign_extend32(val, 4);
-
- err = tegra_fuse_readl(FUSE_SPARE_REALIGNMENT_REG_0, &val);
- if (err)
- return err;
- shifted_cp = sign_extend32(val, 5);
-
- r->actual_temp_cp = 2 * NOMINAL_CALIB_CP_T124 + shifted_cp;
- r->actual_temp_ft = 2 * NOMINAL_CALIB_FT_T124 + shifted_ft;
-
- return 0;
-}
-
-static s64 div64_s64_precise(s64 a, s64 b)
-{
- s64 r, al;
-
- /* Scale up for increased precision division */
- al = a << 16;
-
- r = div64_s64(al * 2 + 1, 2 * b);
- return r >> 16;
-}
-
-static int
-calculate_tsensor_calibration(const struct tegra_tsensor *sensor,
- const struct tsensor_shared_calibration *shared,
- u32 *calib)
-{
- u32 val;
- s32 actual_tsensor_ft, actual_tsensor_cp, delta_sens, delta_temp,
- mult, div;
- s16 therma, thermb;
- s64 tmp;
- int err;
-
- err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
- if (err)
- return err;
-
- actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
- val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK)
- >> FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
- actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
-
- delta_sens = actual_tsensor_ft - actual_tsensor_cp;
- delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
-
- mult = sensor->group->pdiv * sensor->config->tsample_ate;
- div = sensor->config->tsample * sensor->group->pdiv_ate;
-
- therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult,
- (s64) delta_sens * div);
-
- tmp = (s64)actual_tsensor_ft * shared->actual_temp_cp -
- (s64)actual_tsensor_cp * shared->actual_temp_ft;
- thermb = div64_s64_precise(tmp, (s64)delta_sens);
-
- therma = div64_s64_precise((s64)therma * sensor->fuse_corr_alpha,
- (s64)1000000LL);
- thermb = div64_s64_precise((s64)thermb * sensor->fuse_corr_alpha +
- sensor->fuse_corr_beta, (s64)1000000LL);
-
- *calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
- ((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
-
- return 0;
-}
-
-static int enable_tsensor(struct tegra_soctherm *tegra,
- const struct tegra_tsensor *sensor,
- const struct tsensor_shared_calibration *shared)
-{
- void __iomem *base = tegra->regs + sensor->base;
- unsigned int val;
- u32 calib;
- int err;
-
- err = calculate_tsensor_calibration(sensor, shared, &calib);
- if (err)
- return err;
-
- val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
- writel(val, base + SENSOR_CONFIG0);
-
- val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
- val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
- val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
- val |= SENSOR_CONFIG1_TEMP_ENABLE;
- writel(val, base + SENSOR_CONFIG1);
-
- writel(calib, base + SENSOR_CONFIG2);
-
- return 0;
-}
-
-/*
- * Translate from soctherm readback format to millicelsius.
- * The soctherm readback format in bits is as follows:
- * TTTTTTTT H______N
- * where T's contain the temperature in Celsius,
- * H denotes an addition of 0.5 Celsius and N denotes negation
- * of the final value.
- */
-static int translate_temp(u16 val)
-{
- long t;
-
- t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
- if (val & READBACK_ADD_HALF)
- t += 500;
- if (val & READBACK_NEGATE)
- t *= -1;
-
- return t;
-}
-
-static int tegra_thermctl_get_temp(void *data, int *out_temp)
-{
- struct tegra_thermctl_zone *zone = data;
- u32 val;
-
- val = readl(zone->reg);
- val = REG_GET_MASK(val, zone->mask);
- *out_temp = translate_temp(val);
-
- return 0;
-}
-
-static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
- .get_temp = tegra_thermctl_get_temp,
-};
-
-static const struct of_device_id tegra_soctherm_of_match[] = {
- { .compatible = "nvidia,tegra124-soctherm" },
- { },
-};
-MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
-
-static int tegra_soctherm_probe(struct platform_device *pdev)
-{
- struct tegra_soctherm *tegra;
- struct thermal_zone_device *z;
- struct tsensor_shared_calibration shared_calib;
- struct resource *res;
- unsigned int i;
- int err;
- u32 pdiv, hotspot;
-
- const struct tegra_tsensor *tsensors = t124_tsensors;
- const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups;
-
- tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
- if (!tegra)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- tegra->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(tegra->regs))
- return PTR_ERR(tegra->regs);
-
- tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
- if (IS_ERR(tegra->reset)) {
- dev_err(&pdev->dev, "can't get soctherm reset\n");
- return PTR_ERR(tegra->reset);
- }
-
- tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
- if (IS_ERR(tegra->clock_tsensor)) {
- dev_err(&pdev->dev, "can't get tsensor clock\n");
- return PTR_ERR(tegra->clock_tsensor);
- }
-
- tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
- if (IS_ERR(tegra->clock_soctherm)) {
- dev_err(&pdev->dev, "can't get soctherm clock\n");
- return PTR_ERR(tegra->clock_soctherm);
- }
-
- reset_control_assert(tegra->reset);
-
- err = clk_prepare_enable(tegra->clock_soctherm);
- if (err)
- return err;
-
- err = clk_prepare_enable(tegra->clock_tsensor);
- if (err) {
- clk_disable_unprepare(tegra->clock_soctherm);
- return err;
- }
-
- reset_control_deassert(tegra->reset);
-
- /* Initialize raw sensors */
-
- err = calculate_shared_calibration(&shared_calib);
- if (err)
- goto disable_clocks;
-
- for (i = 0; i < ARRAY_SIZE(t124_tsensors); ++i) {
- err = enable_tsensor(tegra, tsensors + i, &shared_calib);
- if (err)
- goto disable_clocks;
- }
-
- /* Program pdiv and hotspot offsets per THERM */
- pdiv = readl(tegra->regs + SENSOR_PDIV);
- hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
- for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) {
- pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
- ttgs[i]->pdiv);
- /* hotspot offset from PLLX, doesn't need to configure PLLX */
- if (ttgs[i]->id != TEGRA124_SOCTHERM_SENSOR_PLLX)
- hotspot = REG_SET_MASK(hotspot,
- ttgs[i]->pllx_hotspot_mask,
- ttgs[i]->pllx_hotspot_diff);
- }
- writel(pdiv, tegra->regs + SENSOR_PDIV);
- writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
-
- /* Initialize thermctl sensors */
-
- for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) {
- struct tegra_thermctl_zone *zone =
- devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
- if (!zone) {
- err = -ENOMEM;
- goto disable_clocks;
- }
-
- zone->reg = tegra->regs + ttgs[i]->sensor_temp_offset;
- zone->mask = ttgs[i]->sensor_temp_mask;
-
- z = devm_thermal_zone_of_sensor_register(&pdev->dev,
- ttgs[i]->id, zone,
- &tegra_of_thermal_ops);
- if (IS_ERR(z)) {
- err = PTR_ERR(z);
- dev_err(&pdev->dev, "failed to register sensor: %d\n",
- err);
- goto disable_clocks;
- }
- }
-
- return 0;
-
-disable_clocks:
- clk_disable_unprepare(tegra->clock_tsensor);
- clk_disable_unprepare(tegra->clock_soctherm);
-
- return err;
-}
-
-static int tegra_soctherm_remove(struct platform_device *pdev)
-{
- struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
-
- clk_disable_unprepare(tegra->clock_tsensor);
- clk_disable_unprepare(tegra->clock_soctherm);
-
- return 0;
-}
-
-static struct platform_driver tegra_soctherm_driver = {
- .probe = tegra_soctherm_probe,
- .remove = tegra_soctherm_remove,
- .driver = {
- .name = "tegra-soctherm",
- .of_match_table = tegra_soctherm_of_match,
- },
-};
-module_platform_driver(tegra_soctherm_driver);
-
-MODULE_AUTHOR("Mikko Perttunen <[email protected]>");
-MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c
new file mode 100644
index 000000000000..06aad13a979f
--- /dev/null
+++ b/drivers/thermal/tegra/tegra124-soctherm.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+static const struct tegra_tsensor_configuration tegra124_tsensor_config = {
+ .tall = 16300,
+ .tiddq_en = 1,
+ .ten_count = 1,
+ .tsample = 120,
+ .tsample_ate = 480,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
+ .id = TEGRA124_SOCTHERM_SENSOR_CPU,
+ .name = "cpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_CPU_MASK,
+ .pllx_hotspot_diff = 10,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
+ .id = TEGRA124_SOCTHERM_SENSOR_GPU,
+ .name = "gpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_GPU_MASK,
+ .pllx_hotspot_diff = 5,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
+ .id = TEGRA124_SOCTHERM_SENSOR_PLLX,
+ .name = "pll",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+};
+
+static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
+ .id = TEGRA124_SOCTHERM_SENSOR_MEM,
+ .name = "mem",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_MEM_MASK,
+ .pllx_hotspot_diff = 0,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+};
+
+static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = {
+ &tegra124_tsensor_group_cpu,
+ &tegra124_tsensor_group_gpu,
+ &tegra124_tsensor_group_pll,
+ &tegra124_tsensor_group_mem,
+};
+
+static const struct tegra_tsensor tegra124_tsensors[] = {
+ {
+ .name = "cpu0",
+ .base = 0xc0,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x098,
+ .fuse_corr_alpha = 1135400,
+ .fuse_corr_beta = -6266900,
+ .group = &tegra124_tsensor_group_cpu,
+ }, {
+ .name = "cpu1",
+ .base = 0xe0,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x084,
+ .fuse_corr_alpha = 1122220,
+ .fuse_corr_beta = -5700700,
+ .group = &tegra124_tsensor_group_cpu,
+ }, {
+ .name = "cpu2",
+ .base = 0x100,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x088,
+ .fuse_corr_alpha = 1127000,
+ .fuse_corr_beta = -6768200,
+ .group = &tegra124_tsensor_group_cpu,
+ }, {
+ .name = "cpu3",
+ .base = 0x120,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x12c,
+ .fuse_corr_alpha = 1110900,
+ .fuse_corr_beta = -6232000,
+ .group = &tegra124_tsensor_group_cpu,
+ }, {
+ .name = "mem0",
+ .base = 0x140,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x158,
+ .fuse_corr_alpha = 1122300,
+ .fuse_corr_beta = -5936400,
+ .group = &tegra124_tsensor_group_mem,
+ }, {
+ .name = "mem1",
+ .base = 0x160,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x15c,
+ .fuse_corr_alpha = 1145700,
+ .fuse_corr_beta = -7124600,
+ .group = &tegra124_tsensor_group_mem,
+ }, {
+ .name = "gpu",
+ .base = 0x180,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x154,
+ .fuse_corr_alpha = 1120100,
+ .fuse_corr_beta = -6000500,
+ .group = &tegra124_tsensor_group_gpu,
+ }, {
+ .name = "pllx",
+ .base = 0x1a0,
+ .config = &tegra124_tsensor_config,
+ .calib_fuse_offset = 0x160,
+ .fuse_corr_alpha = 1106500,
+ .fuse_corr_beta = -6729300,
+ .group = &tegra124_tsensor_group_pll,
+ },
+};
+
+/*
+ * Mask/shift bits in FUSE_TSENSOR_COMMON and
+ * FUSE_TSENSOR_COMMON, which are described in
+ * tegra_soctherm_fuse.c
+ */
+static const struct tegra_soctherm_fuse tegra124_soctherm_fuse = {
+ .fuse_base_cp_mask = 0x3ff,
+ .fuse_base_cp_shift = 0,
+ .fuse_base_ft_mask = 0x7ff << 10,
+ .fuse_base_ft_shift = 10,
+ .fuse_shift_ft_mask = 0x1f << 21,
+ .fuse_shift_ft_shift = 21,
+ .fuse_spare_realignment = 0x1fc,
+};
+
+const struct tegra_soctherm_soc tegra124_soctherm = {
+ .tsensors = tegra124_tsensors,
+ .num_tsensors = ARRAY_SIZE(tegra124_tsensors),
+ .ttgs = tegra124_tsensor_groups,
+ .num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups),
+ .tfuse = &tegra124_soctherm_fuse,
+};
--
1.9.1
Add Tegra210 specific SOC_THERM driver.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/Makefile | 1 +
drivers/thermal/tegra/soctherm-fuse.c | 11 ++
drivers/thermal/tegra/soctherm.c | 6 ++
drivers/thermal/tegra/soctherm.h | 4 +
drivers/thermal/tegra/tegra210-soctherm.c | 173 ++++++++++++++++++++++++++++++
5 files changed, 195 insertions(+)
create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
index d5fb15377b97..bf9e028eba28 100644
--- a/drivers/thermal/tegra/Makefile
+++ b/drivers/thermal/tegra/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra-soctherm.o
tegra-soctherm-y := soctherm.o soctherm-fuse.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124-soctherm.o
+tegra-soctherm-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-soctherm.o
diff --git a/drivers/thermal/tegra/soctherm-fuse.c b/drivers/thermal/tegra/soctherm-fuse.c
index 931c299ab0e8..29963180c453 100644
--- a/drivers/thermal/tegra/soctherm-fuse.c
+++ b/drivers/thermal/tegra/soctherm-fuse.c
@@ -28,7 +28,18 @@
#define FUSE_TSENSOR_COMMON 0x180
/*
+ * Tegra210: Layout of bits in FUSE_TSENSOR_COMMON:
+ * 3 2 1 0
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | BASE_FT | BASE_CP | SHFT_FT | SHIFT_CP |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
* Tegra12x, etc:
+ * In chips prior to Tegra210, this fuse was incorrectly sized as 26 bits,
+ * and didn't hold SHIFT_CP in [31:26]. Therefore these missing six bits
+ * were obtained via the FUSE_SPARE_REALIGNMENT_REG register [5:0].
+ *
* FUSE_TSENSOR_COMMON:
* 3 2 1 0
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index d9b23cded69f..de33704200c6 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -147,6 +147,12 @@ static const struct of_device_id tegra_soctherm_of_match[] = {
.data = &tegra124_soctherm,
},
#endif
+#ifdef CONFIG_ARCH_TEGRA_210_SOC
+ {
+ .compatible = "nvidia,tegra210-soctherm",
+ .data = &tegra210_soctherm,
+ },
+#endif
{ },
};
MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
index f80ee1492ddb..69d317269af1 100644
--- a/drivers/thermal/tegra/soctherm.h
+++ b/drivers/thermal/tegra/soctherm.h
@@ -106,5 +106,9 @@ int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
extern const struct tegra_soctherm_soc tegra124_soctherm;
#endif
+#ifdef CONFIG_ARCH_TEGRA_210_SOC
+extern const struct tegra_soctherm_soc tegra210_soctherm;
+#endif
+
#endif
diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c
new file mode 100644
index 000000000000..0e76a89c557d
--- /dev/null
+++ b/drivers/thermal/tegra/tegra210-soctherm.c
@@ -0,0 +1,173 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/tegra/fuse.h>
+
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "soctherm.h"
+
+static const struct tegra_tsensor_configuration tegra210_tsensor_config = {
+ .tall = 16300,
+ .tiddq_en = 1,
+ .ten_count = 1,
+ .tsample = 120,
+ .tsample_ate = 480,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
+ .id = TEGRA124_SOCTHERM_SENSOR_CPU,
+ .name = "cpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_CPU_MASK,
+ .pllx_hotspot_diff = 10,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
+ .id = TEGRA124_SOCTHERM_SENSOR_GPU,
+ .name = "gpu",
+ .sensor_temp_offset = SENSOR_TEMP1,
+ .sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_GPU_MASK,
+ .pllx_hotspot_diff = 5,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
+ .id = TEGRA124_SOCTHERM_SENSOR_PLLX,
+ .name = "pll",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+};
+
+static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
+ .id = TEGRA124_SOCTHERM_SENSOR_MEM,
+ .name = "mem",
+ .sensor_temp_offset = SENSOR_TEMP2,
+ .sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
+ .pdiv = 8,
+ .pdiv_ate = 8,
+ .pdiv_mask = SENSOR_PDIV_MEM_MASK,
+ .pllx_hotspot_diff = 0,
+ .pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+};
+
+static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = {
+ &tegra210_tsensor_group_cpu,
+ &tegra210_tsensor_group_gpu,
+ &tegra210_tsensor_group_pll,
+ &tegra210_tsensor_group_mem,
+};
+
+static const struct tegra_tsensor tegra210_tsensors[] = {
+ {
+ .name = "cpu0",
+ .base = 0xc0,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x098,
+ .fuse_corr_alpha = 1085000,
+ .fuse_corr_beta = 3244200,
+ .group = &tegra210_tsensor_group_cpu,
+ }, {
+ .name = "cpu1",
+ .base = 0xe0,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x084,
+ .fuse_corr_alpha = 1126200,
+ .fuse_corr_beta = -67500,
+ .group = &tegra210_tsensor_group_cpu,
+ }, {
+ .name = "cpu2",
+ .base = 0x100,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x088,
+ .fuse_corr_alpha = 1098400,
+ .fuse_corr_beta = 2251100,
+ .group = &tegra210_tsensor_group_cpu,
+ }, {
+ .name = "cpu3",
+ .base = 0x120,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x12c,
+ .fuse_corr_alpha = 1108000,
+ .fuse_corr_beta = 602700,
+ .group = &tegra210_tsensor_group_cpu,
+ }, {
+ .name = "mem0",
+ .base = 0x140,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x158,
+ .fuse_corr_alpha = 1069200,
+ .fuse_corr_beta = 3549900,
+ .group = &tegra210_tsensor_group_mem,
+ }, {
+ .name = "mem1",
+ .base = 0x160,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x15c,
+ .fuse_corr_alpha = 1173700,
+ .fuse_corr_beta = -6263600,
+ .group = &tegra210_tsensor_group_mem,
+ }, {
+ .name = "gpu",
+ .base = 0x180,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x154,
+ .fuse_corr_alpha = 1074300,
+ .fuse_corr_beta = 2734900,
+ .group = &tegra210_tsensor_group_gpu,
+ }, {
+ .name = "pllx",
+ .base = 0x1a0,
+ .config = &tegra210_tsensor_config,
+ .calib_fuse_offset = 0x160,
+ .fuse_corr_alpha = 1039700,
+ .fuse_corr_beta = 6829100,
+ .group = &tegra210_tsensor_group_pll,
+ },
+};
+
+/*
+ * Mask/shift bits in FUSE_TSENSOR_COMMON and
+ * FUSE_TSENSOR_COMMON, which are described in
+ * tegra_soctherm_fuse.c
+ */
+static const struct tegra_soctherm_fuse tegra210_soctherm_fuse = {
+ .fuse_base_cp_mask = 0x3ff << 11,
+ .fuse_base_cp_shift = 11,
+ .fuse_base_ft_mask = 0x7ff << 21,
+ .fuse_base_ft_shift = 21,
+ .fuse_shift_ft_mask = 0x1f << 6,
+ .fuse_shift_ft_shift = 6,
+ .fuse_spare_realignment = 0,
+};
+
+const struct tegra_soctherm_soc tegra210_soctherm = {
+ .tsensors = tegra210_tsensors,
+ .num_tsensors = ARRAY_SIZE(tegra210_tsensors),
+ .ttgs = tegra210_tsensor_groups,
+ .num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups),
+ .tfuse = &tegra210_soctherm_fuse,
+};
--
1.9.1
Add a debugfs interface to show register contents for debug.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/soctherm.c | 146 ++++++++++++++++++++++++++++++++++++++-
drivers/thermal/tegra/soctherm.h | 2 +
2 files changed, 145 insertions(+), 3 deletions(-)
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index de33704200c6..c6029fcfb22d 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -15,6 +15,7 @@
*
*/
+#include <linux/debugfs.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -33,14 +34,18 @@
#define SENSOR_CONFIG0 0
#define SENSOR_CONFIG0_STOP BIT(0)
-#define SENSOR_CONFIG0_TALL_SHIFT 8
-#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
-#define SENSOR_CONFIG0_OVER BIT(3)
#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
+#define SENSOR_CONFIG0_OVER BIT(3)
+#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
+#define SENSOR_CONFIG0_TALL_MASK (0xfffff << 8)
+#define SENSOR_CONFIG0_TALL_SHIFT 8
#define SENSOR_CONFIG1 4
+#define SENSOR_CONFIG1_TSAMPLE_MASK 0x3ff
#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
+#define SENSOR_CONFIG1_TIDDQ_EN_MASK (0x3f << 15)
#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
+#define SENSOR_CONFIG1_TEN_COUNT_MASK (0x3f << 24)
#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
@@ -49,6 +54,14 @@
* because, it will be used by tegra_soctherm_fuse.c
*/
+#define SENSOR_STATUS0 0xc
+#define SENSOR_STATUS0_VALID_MASK BIT(31)
+#define SENSOR_STATUS0_CAPTURE_MASK 0xffff
+
+#define SENSOR_STATUS1 0x10
+#define SENSOR_STATUS1_TEMP_VALID_MASK BIT(31)
+#define SENSOR_STATUS1_TEMP_MASK 0xffff
+
#define READBACK_VALUE_MASK 0xff00
#define READBACK_VALUE_SHIFT 8
#define READBACK_ADD_HALF BIT(7)
@@ -73,6 +86,8 @@ struct tegra_soctherm {
u32 *calib;
struct tegra_soctherm_soc *soc;
+
+ struct dentry *debugfs_dir;
};
static int enable_tsensor(struct tegra_soctherm *tegra,
@@ -140,6 +155,127 @@ static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
.get_temp = tegra_thermctl_get_temp,
};
+#ifdef CONFIG_DEBUG_FS
+static int regs_show(struct seq_file *s, void *data)
+{
+ struct platform_device *pdev = s->private;
+ struct tegra_soctherm *ts = platform_get_drvdata(pdev);
+ const struct tegra_tsensor *tsensors = ts->soc->tsensors;
+ u32 r, state;
+ int i;
+
+ seq_puts(s, "-----TSENSE (convert HW)-----\n");
+
+ for (i = 0; i < ts->soc->num_tsensors; i++) {
+ r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG1);
+ state = REG_GET_MASK(r, SENSOR_CONFIG1_TEMP_ENABLE);
+
+ seq_printf(s, "%s: ", tsensors[i].name);
+ seq_printf(s, "En(%d) ", state);
+
+ if (!state) {
+ seq_puts(s, "\n");
+ continue;
+ }
+
+ state = REG_GET_MASK(r, SENSOR_CONFIG1_TIDDQ_EN_MASK);
+ seq_printf(s, "tiddq(%d) ", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG1_TEN_COUNT_MASK);
+ seq_printf(s, "ten_count(%d) ", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG1_TSAMPLE_MASK);
+ seq_printf(s, "tsample(%d) ", state + 1);
+
+ r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS1);
+ state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_VALID_MASK);
+ seq_printf(s, "Temp(%d/", state);
+ state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_MASK);
+ seq_printf(s, "%d) ", translate_temp(state));
+
+ r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS0);
+ state = REG_GET_MASK(r, SENSOR_STATUS0_VALID_MASK);
+ seq_printf(s, "Capture(%d/", state);
+ state = REG_GET_MASK(r, SENSOR_STATUS0_CAPTURE_MASK);
+ seq_printf(s, "%d) ", state);
+
+ r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG0);
+ state = REG_GET_MASK(r, SENSOR_CONFIG0_STOP);
+ seq_printf(s, "Stop(%d) ", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG0_TALL_MASK);
+ seq_printf(s, "Tall(%d) ", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG0_TCALC_OVER);
+ seq_printf(s, "Over(%d/", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG0_OVER);
+ seq_printf(s, "%d/", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG0_CPTR_OVER);
+ seq_printf(s, "%d) ", state);
+
+ r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG2);
+ state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMA_MASK);
+ seq_printf(s, "Therm_A/B(%d/", state);
+ state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMB_MASK);
+ seq_printf(s, "%d)\n", (s16)state);
+ }
+
+ r = readl(ts->regs + SENSOR_PDIV);
+ seq_printf(s, "PDIV: 0x%x\n", r);
+
+ r = readl(ts->regs + SENSOR_HOTSPOT_OFF);
+ seq_printf(s, "HOTSPOT: 0x%x\n", r);
+
+ seq_puts(s, "\n");
+ seq_puts(s, "-----SOC_THERM-----\n");
+
+ r = readl(ts->regs + SENSOR_TEMP1);
+ state = REG_GET_MASK(r, SENSOR_TEMP1_CPU_TEMP_MASK);
+ seq_printf(s, "Temperatures: CPU(%d) ", translate_temp(state));
+ state = REG_GET_MASK(r, SENSOR_TEMP1_GPU_TEMP_MASK);
+ seq_printf(s, " GPU(%d) ", translate_temp(state));
+ r = readl(ts->regs + SENSOR_TEMP2);
+ state = REG_GET_MASK(r, SENSOR_TEMP2_PLLX_TEMP_MASK);
+ seq_printf(s, " PLLX(%d) ", translate_temp(state));
+ state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
+ seq_printf(s, " MEM(%d)\n", translate_temp(state));
+
+ return 0;
+}
+
+static int regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, regs_show, inode->i_private);
+}
+
+static const struct file_operations regs_fops = {
+ .open = regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void soctherm_debug_init(struct platform_device *pdev)
+{
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ struct dentry *root, *file;
+
+ root = debugfs_create_dir("soctherm", NULL);
+ if (!root) {
+ dev_err(&pdev->dev, "failed to create debugfs directory\n");
+ return;
+ }
+
+ tegra->debugfs_dir = root;
+
+ file = debugfs_create_file("reg_contents", 0644, root,
+ pdev, ®s_fops);
+ if (!file) {
+ dev_err(&pdev->dev, "failed to create debugfs file\n");
+ debugfs_remove_recursive(tegra->debugfs_dir);
+ tegra->debugfs_dir = NULL;
+ }
+}
+#else
+static inline void soctherm_debug_init(struct platform_device *pdev) {}
+#endif
+
static const struct of_device_id tegra_soctherm_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{
@@ -282,6 +418,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
}
}
+ soctherm_debug_init(pdev);
+
return 0;
disable_clocks:
@@ -295,6 +433,8 @@ static int tegra_soctherm_remove(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ debugfs_remove_recursive(tegra->debugfs_dir);
+
clk_disable_unprepare(tegra->clock_tsensor);
clk_disable_unprepare(tegra->clock_soctherm);
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
index 69d317269af1..ec4b87616d01 100644
--- a/drivers/thermal/tegra/soctherm.h
+++ b/drivers/thermal/tegra/soctherm.h
@@ -16,7 +16,9 @@
#define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
#define SENSOR_CONFIG2 8
+#define SENSOR_CONFIG2_THERMA_MASK (0xffff << 16)
#define SENSOR_CONFIG2_THERMA_SHIFT 16
+#define SENSOR_CONFIG2_THERMB_MASK 0xffff
#define SENSOR_CONFIG2_THERMB_SHIFT 0
#define SENSOR_PDIV 0x1c0
--
1.9.1
In current of-thermal, the .set_trip_temp only support to
set trip_temp for SW. But some sensors support to set
trip_temp on hardware, so that can trigger interrupt,
shutdown or any other events.
This patch adds .set_trip_temp() callback in
thermal_zone_of_device_ops{}, so that the sensor device can
use it to set trip_temp on hardware.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/of-thermal.c | 8 ++++++++
include/linux/thermal.h | 1 +
2 files changed, 9 insertions(+)
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index acc767b6fdee..85288029b46c 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -331,6 +331,14 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
if (trip >= data->ntrips || trip < 0)
return -EDOM;
+ if (data->ops->set_trip_temp) {
+ int ret;
+
+ ret = data->ops->set_trip_temp(data->sensor_data, trip, temp);
+ if (ret)
+ return ret;
+ }
+
/* thermal framework should take care of data->mask & (1 << trip) */
data->trips[trip].temperature = temp;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index a55d0523f75d..97b86c549df1 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -340,6 +340,7 @@ struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
int (*get_trend)(void *, long *);
int (*set_emul_temp)(void *, int);
+ int (*set_trip_temp)(void *, int, int);
};
/**
--
1.9.1
The "critical" type trip in thermal zone can be
set to SOC_THERM hardware, it can trigger shut down
or reset event from hardware.
Signed-off-by: Wei Ni <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/thermal/tegra-soctherm.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
index 6b68cd150405..351a7376baa8 100644
--- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
@@ -26,6 +26,10 @@ Required properties :
of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
list of valid values when referring to thermal sensors.
+Note:
+- the "critical" type trip points will be set to SOC_THERM hardware as the
+shut down temperature. Once the temperature of this thermal zone is higher
+than it, the system will be shutdown or reset by hardware.
Example :
@@ -51,5 +55,13 @@ Example: referring to thermal sensors :
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu_shutdown_trip: shutdown-trip {
+ temperature = <102500>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
};
};
--
1.9.1
Add support for hardware critical thermal limits to the
SOC_THERM driver. It use the Linux thermal framework to
create critical trip temp, and set it to SOC_THERM hardware.
If these limits are breached, the chip will reset, and if
appropriately configured, will turn off the PMIC.
This support is critical for safe usage of the chip.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/soctherm.c | 166 +++++++++++++++++++++++++++++-
drivers/thermal/tegra/soctherm.h | 7 ++
drivers/thermal/tegra/tegra124-soctherm.c | 24 +++++
drivers/thermal/tegra/tegra210-soctherm.c | 24 +++++
4 files changed, 216 insertions(+), 5 deletions(-)
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index c6029fcfb22d..365b45213327 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -73,9 +73,14 @@
#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
(((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
+static const int min_low_temp = -127000;
+static const int max_high_temp = 127000;
+
struct tegra_thermctl_zone {
void __iomem *reg;
- u32 mask;
+ struct device *dev;
+ struct thermal_zone_device *tz;
+ const struct tegra_tsensor_group *sg;
};
struct tegra_soctherm {
@@ -145,22 +150,158 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
u32 val;
val = readl(zone->reg);
- val = REG_GET_MASK(val, zone->mask);
+ val = REG_GET_MASK(val, zone->sg->sensor_temp_mask);
*out_temp = translate_temp(val);
return 0;
}
+static int
+thermtrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
+ int trip_temp);
+
+static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
+{
+ struct tegra_thermctl_zone *zone = data;
+ struct thermal_zone_device *tz = zone->tz;
+ const struct tegra_tsensor_group *sg = zone->sg;
+ struct device *dev = zone->dev;
+ enum thermal_trip_type type;
+ int ret;
+
+ if (!tz)
+ return -EINVAL;
+
+ ret = tz->ops->get_trip_type(tz, trip, &type);
+ if (ret)
+ return ret;
+
+ if (type != THERMAL_TRIP_CRITICAL)
+ return 0;
+
+ return thermtrip_program(dev, sg, temp);
+}
+
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
.get_temp = tegra_thermctl_get_temp,
+ .set_trip_temp = tegra_thermctl_set_trip_temp,
};
+/**
+ * enforce_temp_range() - check and enforce temperature range [min, max]
+ * @trip_temp: the trip temperature to check
+ *
+ * Checks and enforces the permitted temperature range that SOC_THERM
+ * HW can support This is
+ * done while taking care of precision.
+ *
+ * Return: The precision adjusted capped temperature in millicelsius.
+ */
+static int enforce_temp_range(struct device *dev, int trip_temp)
+{
+ int temp;
+
+ temp = clamp_val(trip_temp, min_low_temp, max_high_temp);
+ if (temp != trip_temp)
+ dev_info(dev, "soctherm: trip temperature %d forced to %d\n",
+ trip_temp, temp);
+ return temp;
+}
+
+/**
+ * thermtrip_program() - Configures the hardware to shut down the
+ * system if a given sensor group reaches a given temperature
+ * @dev: ptr to the struct device for the SOC_THERM IP block
+ * @sg: pointer to the sensor group to set the thermtrip temperature for
+ * @trip_temp: the temperature in millicelsius to trigger the thermal trip at
+ *
+ * Sets the thermal trip threshold of the given sensor group to be the
+ * @trip_temp. If this threshold is crossed, the hardware will shut
+ * down.
+ *
+ * Note that, although @trip_temp is specified in millicelsius, the
+ * hardware is programmed in degrees Celsius.
+ *
+ * Return: 0 upon success, or %-EINVAL upon failure.
+ */
+static int thermtrip_program(struct device *dev,
+ const struct tegra_tsensor_group *sg,
+ int trip_temp)
+{
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ int temp;
+ u32 r;
+
+ if (!dev || !sg)
+ return -EINVAL;
+
+ if (!sg->thermtrip_threshold_mask)
+ return -EINVAL;
+
+ temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
+
+ r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
+ r = REG_SET_MASK(r, sg->thermtrip_threshold_mask, temp);
+ r = REG_SET_MASK(r, sg->thermtrip_enable_mask, 1);
+ r = REG_SET_MASK(r, sg->thermtrip_any_en_mask, 0);
+ writel(r, ts->regs + THERMCTL_THERMTRIP_CTL);
+
+ return 0;
+}
+
+/**
+ * tegra_soctherm_set_hwtrips() - set HW trip point from DT data
+ * @dev: struct device * of the SOC_THERM instance
+ *
+ * Configure the SOC_THERM HW trip points, setting "THERMTRIP"
+ * trip points , using "critical" type trip_temp from thermal
+ * zone.
+ * After they have been configured, THERMTRIP will take action
+ * when the configured SoC thermal sensor group reaches a
+ * certain temperature.
+ *
+ * Return: 0 upon success, or a negative error code on failure.
+ * "Success" does not mean that trips was enabled; it could also
+ * mean that no node was found in DT.
+ * THERMTRIP has been enabled successfully when a message similar to
+ * this one appears on the serial console:
+ * "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC"
+ */
+static int tegra_soctherm_set_hwtrips(struct device *dev,
+ const struct tegra_tsensor_group *sg,
+ struct thermal_zone_device *tz)
+{
+ int temperature;
+ int ret;
+
+ ret = tz->ops->get_crit_temp(tz, &temperature);
+ if (ret) {
+ dev_warn(dev, "thermtrip: %s: missing critical temperature\n",
+ sg->name);
+ return ret;
+ }
+
+ ret = thermtrip_program(dev, sg, temperature);
+ if (ret) {
+ dev_err(dev, "thermtrip: %s: error during enable\n",
+ sg->name);
+ return ret;
+ }
+
+ dev_info(dev,
+ "thermtrip: will shut down when %s reaches %d mC\n",
+ sg->name, temperature);
+
+ return 0;
+}
+
#ifdef CONFIG_DEBUG_FS
static int regs_show(struct seq_file *s, void *data)
{
struct platform_device *pdev = s->private;
struct tegra_soctherm *ts = platform_get_drvdata(pdev);
const struct tegra_tsensor *tsensors = ts->soc->tsensors;
+ const struct tegra_tsensor_group **ttgs = ts->soc->ttgs;
u32 r, state;
int i;
@@ -236,6 +377,17 @@ static int regs_show(struct seq_file *s, void *data)
state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
seq_printf(s, " MEM(%d)\n", translate_temp(state));
+ r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
+ state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask);
+ seq_printf(s, "Thermtrip Any En(%d)\n", state);
+ for (i = 0; i < ts->soc->num_ttgs; i++) {
+ state = REG_GET_MASK(r, ttgs[i]->thermtrip_enable_mask);
+ seq_printf(s, " %s En(%d) ", ttgs[i]->name, state);
+ state = REG_GET_MASK(r, ttgs[i]->thermtrip_threshold_mask);
+ state *= ts->soc->thresh_grain;
+ seq_printf(s, "Thresh(%d)\n", state);
+ }
+
return 0;
}
@@ -394,8 +546,6 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
writel(pdiv, tegra->regs + SENSOR_PDIV);
writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
- /* Initialize thermctl sensors */
-
for (i = 0; i < soc->num_ttgs; ++i) {
struct tegra_thermctl_zone *zone =
devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
@@ -405,7 +555,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
}
zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
- zone->mask = soc->ttgs[i]->sensor_temp_mask;
+ zone->dev = &pdev->dev;
+ zone->sg = soc->ttgs[i];
z = devm_thermal_zone_of_sensor_register(&pdev->dev,
soc->ttgs[i]->id, zone,
@@ -416,6 +567,11 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
err);
goto disable_clocks;
}
+
+ zone->tz = z;
+
+ /* Configure hw trip points */
+ tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
}
soctherm_debug_init(pdev);
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
index ec4b87616d01..f6dbbba80367 100644
--- a/drivers/thermal/tegra/soctherm.h
+++ b/drivers/thermal/tegra/soctherm.h
@@ -21,6 +21,9 @@
#define SENSOR_CONFIG2_THERMB_MASK 0xffff
#define SENSOR_CONFIG2_THERMB_SHIFT 0
+#define THERMCTL_THERMTRIP_CTL 0x80
+/* BITs are defined in device file */
+
#define SENSOR_PDIV 0x1c0
#define SENSOR_PDIV_CPU_MASK (0xf << 12)
#define SENSOR_PDIV_GPU_MASK (0xf << 8)
@@ -59,6 +62,9 @@ struct tegra_tsensor_group {
u32 sensor_temp_mask;
u32 pdiv, pdiv_ate, pdiv_mask;
u32 pllx_hotspot_diff, pllx_hotspot_mask;
+ u32 thermtrip_enable_mask;
+ u32 thermtrip_any_en_mask;
+ u32 thermtrip_threshold_mask;
};
struct tegra_tsensor_configuration {
@@ -96,6 +102,7 @@ struct tegra_soctherm_soc {
const struct tegra_tsensor_group **ttgs;
const unsigned int num_ttgs;
const struct tegra_soctherm_fuse *tfuse;
+ const int thresh_grain;
};
int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c
index 06aad13a979f..beb9d36b9c8a 100644
--- a/drivers/thermal/tegra/tegra124-soctherm.c
+++ b/drivers/thermal/tegra/tegra124-soctherm.c
@@ -19,6 +19,17 @@
#include "soctherm.h"
+#define TEGRA124_THERMTRIP_ANY_EN_MASK (0x1 << 28)
+#define TEGRA124_THERMTRIP_MEM_EN_MASK (0x1 << 27)
+#define TEGRA124_THERMTRIP_GPU_EN_MASK (0x1 << 26)
+#define TEGRA124_THERMTRIP_CPU_EN_MASK (0x1 << 25)
+#define TEGRA124_THERMTRIP_TSENSE_EN_MASK (0x1 << 24)
+#define TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK (0xff << 16)
+#define TEGRA124_THERMTRIP_CPU_THRESH_MASK (0xff << 8)
+#define TEGRA124_THERMTRIP_TSENSE_THRESH_MASK 0xff
+
+#define TEGRA124_THRESH_GRAIN 1000
+
static const struct tegra_tsensor_configuration tegra124_tsensor_config = {
.tall = 16300,
.tiddq_en = 1,
@@ -37,6 +48,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
.pdiv_mask = SENSOR_PDIV_CPU_MASK,
.pllx_hotspot_diff = 10,
.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+ .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
@@ -49,6 +63,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
.pdiv_mask = SENSOR_PDIV_GPU_MASK,
.pllx_hotspot_diff = 5,
.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+ .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
@@ -59,6 +76,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+ .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
@@ -71,6 +91,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
.pdiv_mask = SENSOR_PDIV_MEM_MASK,
.pllx_hotspot_diff = 0,
.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+ .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = {
@@ -169,4 +192,5 @@ const struct tegra_soctherm_soc tegra124_soctherm = {
.ttgs = tegra124_tsensor_groups,
.num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups),
.tfuse = &tegra124_soctherm_fuse,
+ .thresh_grain = TEGRA124_THRESH_GRAIN,
};
diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c
index 0e76a89c557d..19cc0ab66f0e 100644
--- a/drivers/thermal/tegra/tegra210-soctherm.c
+++ b/drivers/thermal/tegra/tegra210-soctherm.c
@@ -20,6 +20,17 @@
#include "soctherm.h"
+#define TEGRA210_THERMTRIP_ANY_EN_MASK (0x1 << 31)
+#define TEGRA210_THERMTRIP_MEM_EN_MASK (0x1 << 30)
+#define TEGRA210_THERMTRIP_GPU_EN_MASK (0x1 << 29)
+#define TEGRA210_THERMTRIP_CPU_EN_MASK (0x1 << 28)
+#define TEGRA210_THERMTRIP_TSENSE_EN_MASK (0x1 << 27)
+#define TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK (0x1ff << 18)
+#define TEGRA210_THERMTRIP_CPU_THRESH_MASK (0x1ff << 9)
+#define TEGRA210_THERMTRIP_TSENSE_THRESH_MASK 0x1ff
+
+#define TEGRA210_THRESH_GRAIN 500
+
static const struct tegra_tsensor_configuration tegra210_tsensor_config = {
.tall = 16300,
.tiddq_en = 1,
@@ -38,6 +49,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
.pdiv_mask = SENSOR_PDIV_CPU_MASK,
.pllx_hotspot_diff = 10,
.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
+ .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
@@ -50,6 +64,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
.pdiv_mask = SENSOR_PDIV_GPU_MASK,
.pllx_hotspot_diff = 5,
.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
+ .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
@@ -60,6 +77,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
+ .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
@@ -72,6 +92,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
.pdiv_mask = SENSOR_PDIV_MEM_MASK,
.pllx_hotspot_diff = 0,
.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
+ .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
+ .thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK,
+ .thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = {
@@ -170,4 +193,5 @@ const struct tegra_soctherm_soc tegra210_soctherm = {
.ttgs = tegra210_tsensor_groups,
.num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups),
.tfuse = &tegra210_soctherm_fuse,
+ .thresh_grain = TEGRA210_THRESH_GRAIN,
};
--
1.9.1
Handle clock enable/disable codes in one function
soctherm_clk_enable(), so that the codes are more clear.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/soctherm.c | 51 ++++++++++++++++++++++++++++------------
1 file changed, 36 insertions(+), 15 deletions(-)
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 365b45213327..deeb3b7e4dac 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -428,6 +428,39 @@ static void soctherm_debug_init(struct platform_device *pdev)
static inline void soctherm_debug_init(struct platform_device *pdev) {}
#endif
+static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
+{
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ int err;
+
+ if (!tegra->clock_soctherm || !tegra->clock_tsensor)
+ return -EINVAL;
+
+ reset_control_assert(tegra->reset);
+
+ if (enable) {
+ err = clk_prepare_enable(tegra->clock_soctherm);
+ if (err) {
+ reset_control_deassert(tegra->reset);
+ return err;
+ }
+
+ err = clk_prepare_enable(tegra->clock_tsensor);
+ if (err) {
+ clk_disable_unprepare(tegra->clock_soctherm);
+ reset_control_deassert(tegra->reset);
+ return err;
+ }
+ } else {
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+ }
+
+ reset_control_deassert(tegra->reset);
+
+ return 0;
+}
+
static const struct of_device_id tegra_soctherm_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{
@@ -496,20 +529,10 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
return PTR_ERR(tegra->clock_soctherm);
}
- reset_control_assert(tegra->reset);
-
- err = clk_prepare_enable(tegra->clock_soctherm);
+ err = soctherm_clk_enable(pdev, true);
if (err)
return err;
- err = clk_prepare_enable(tegra->clock_tsensor);
- if (err) {
- clk_disable_unprepare(tegra->clock_soctherm);
- return err;
- }
-
- reset_control_deassert(tegra->reset);
-
/* Initialize raw sensors */
tegra->calib = devm_kzalloc(&pdev->dev,
@@ -579,8 +602,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
return 0;
disable_clocks:
- clk_disable_unprepare(tegra->clock_tsensor);
- clk_disable_unprepare(tegra->clock_soctherm);
+ soctherm_clk_enable(pdev, false);
return err;
}
@@ -591,8 +613,7 @@ static int tegra_soctherm_remove(struct platform_device *pdev)
debugfs_remove_recursive(tegra->debugfs_dir);
- clk_disable_unprepare(tegra->clock_tsensor);
- clk_disable_unprepare(tegra->clock_soctherm);
+ soctherm_clk_enable(pdev, false);
return 0;
}
--
1.9.1
Handle HW initialization in one function soctherm_init(),
so that the codes are more clear.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/soctherm.c | 85 +++++++++++++++++++++-------------------
1 file changed, 44 insertions(+), 41 deletions(-)
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index deeb3b7e4dac..d2b7c255d71f 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -95,19 +95,11 @@ struct tegra_soctherm {
struct dentry *debugfs_dir;
};
-static int enable_tsensor(struct tegra_soctherm *tegra,
- unsigned int i,
- const struct tsensor_shared_calib *shared)
+static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
{
const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
void __iomem *base = tegra->regs + sensor->base;
- u32 *calib = &tegra->calib[i];
unsigned int val;
- int err;
-
- err = tegra_calc_tsensor_calib(sensor, shared, calib);
- if (err)
- return err;
val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
writel(val, base + SENSOR_CONFIG0);
@@ -118,9 +110,7 @@ static int enable_tsensor(struct tegra_soctherm *tegra,
val |= SENSOR_CONFIG1_TEMP_ENABLE;
writel(val, base + SENSOR_CONFIG1);
- writel(*calib, base + SENSOR_CONFIG2);
-
- return 0;
+ writel(tegra->calib[i], base + SENSOR_CONFIG2);
}
/*
@@ -461,6 +451,34 @@ static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
return 0;
}
+static void soctherm_init(struct platform_device *pdev)
+{
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ const struct tegra_tsensor_group **ttgs = tegra->soc->ttgs;
+ int i;
+ u32 pdiv, hotspot;
+
+ /* Initialize raw sensors */
+ for (i = 0; i < tegra->soc->num_tsensors; ++i)
+ enable_tsensor(tegra, i);
+
+ /* program pdiv and hotspot offsets per THERM */
+ pdiv = readl(tegra->regs + SENSOR_PDIV);
+ hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
+ for (i = 0; i < tegra->soc->num_ttgs; ++i) {
+ pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
+ ttgs[i]->pdiv);
+ /* hotspot offset from PLLX, doesn't need to configure PLLX */
+ if (ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
+ continue;
+ hotspot = REG_SET_MASK(hotspot,
+ ttgs[i]->pllx_hotspot_mask,
+ ttgs[i]->pllx_hotspot_diff);
+ }
+ writel(pdiv, tegra->regs + SENSOR_PDIV);
+ writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
+}
+
static const struct of_device_id tegra_soctherm_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{
@@ -488,7 +506,6 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
struct tegra_soctherm_soc *soc;
unsigned int i;
int err;
- u32 pdiv, hotspot;
match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
if (!match)
@@ -529,45 +546,31 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
return PTR_ERR(tegra->clock_soctherm);
}
- err = soctherm_clk_enable(pdev, true);
- if (err)
- return err;
-
- /* Initialize raw sensors */
-
tegra->calib = devm_kzalloc(&pdev->dev,
sizeof(u32) * soc->num_tsensors,
GFP_KERNEL);
- if (!tegra->calib) {
- err = -ENOMEM;
- goto disable_clocks;
- }
+ if (!tegra->calib)
+ return -ENOMEM;
+ /* calculate shared calibration data */
err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
if (err)
- goto disable_clocks;
+ return err;
+ /* calculate tsensor calibaration data */
for (i = 0; i < soc->num_tsensors; ++i) {
- err = enable_tsensor(tegra, i, &shared_calib);
+ err = tegra_calc_tsensor_calib(&soc->tsensors[i],
+ &shared_calib,
+ &tegra->calib[i]);
if (err)
- goto disable_clocks;
+ return err;
}
- /* Program pdiv and hotspot offsets per THERM */
- pdiv = readl(tegra->regs + SENSOR_PDIV);
- hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
- for (i = 0; i < soc->num_ttgs; ++i) {
- pdiv = REG_SET_MASK(pdiv, soc->ttgs[i]->pdiv_mask,
- soc->ttgs[i]->pdiv);
- /* hotspot offset from PLLX, doesn't need to configure PLLX */
- if (soc->ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
- continue;
- hotspot = REG_SET_MASK(hotspot,
- soc->ttgs[i]->pllx_hotspot_mask,
- soc->ttgs[i]->pllx_hotspot_diff);
- }
- writel(pdiv, tegra->regs + SENSOR_PDIV);
- writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
+ err = soctherm_clk_enable(pdev, true);
+ if (err)
+ return err;
+
+ soctherm_init(pdev);
for (i = 0; i < soc->num_ttgs; ++i) {
struct tegra_thermctl_zone *zone =
--
1.9.1
Add suspend/resume function in soctherm driver.
Signed-off-by: Wei Ni <[email protected]>
---
drivers/thermal/tegra/soctherm.c | 46 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index d2b7c255d71f..559c74279eb8 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -88,6 +88,7 @@ struct tegra_soctherm {
struct clk *clock_tsensor;
struct clk *clock_soctherm;
void __iomem *regs;
+ struct thermal_zone_device **thermctl_tzs;
u32 *calib;
struct tegra_soctherm_soc *soc;
@@ -566,6 +567,12 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
return err;
}
+ tegra->thermctl_tzs = devm_kzalloc(&pdev->dev,
+ sizeof(*z) * soc->num_ttgs,
+ GFP_KERNEL);
+ if (!tegra->thermctl_tzs)
+ return -ENOMEM;
+
err = soctherm_clk_enable(pdev, true);
if (err)
return err;
@@ -595,6 +602,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
}
zone->tz = z;
+ tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
/* Configure hw trip points */
tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
@@ -621,11 +629,49 @@ static int tegra_soctherm_remove(struct platform_device *pdev)
return 0;
}
+static int soctherm_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ soctherm_clk_enable(pdev, false);
+
+ return 0;
+}
+
+static int soctherm_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ struct tegra_soctherm_soc *soc = tegra->soc;
+ int err, i;
+
+ err = soctherm_clk_enable(pdev, true);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Resume failed: enable clocks failed\n");
+ return err;
+ }
+
+ soctherm_init(pdev);
+
+ for (i = 0; i < soc->num_ttgs; ++i) {
+ struct thermal_zone_device *tz;
+
+ tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
+ tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
+
static struct platform_driver tegra_soctherm_driver = {
.probe = tegra_soctherm_probe,
.remove = tegra_soctherm_remove,
.driver = {
.name = "tegra_soctherm",
+ .pm = &tegra_soctherm_pm,
.of_match_table = tegra_soctherm_of_match,
},
};
--
1.9.1
Adds soctherm node for Tegra210, and add cpu,
gpu, mem, pllx as thermal-zones. Set critical
trip temperatures for them.
Signed-off-by: Wei Ni <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 104 +++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 23b0630602cf..232fa14a913d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/memory/tegra210-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
/ {
compatible = "nvidia,tegra210";
@@ -802,4 +803,107 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
+
+ soctherm: thermal-sensor@0,700e2000 {
+ compatible = "nvidia,tegra210-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+ <&tegra_car TEGRA210_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu-shutdown-trip {
+ temperature = <102500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ mem {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ gpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ pllx {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ };
};
--
1.9.1
Set general "critical" trip temperatures for cpu, gpu, mem and pllx
thermal zones for all Tegra124 platform, these trips can trigger
shut down or reset.
Tegra124 Jetson TK1 was already set "critical" trips before, so it
can overwrite the general values.
Signed-off-by: Wei Ni <[email protected]>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 18 ++--------
arch/arm/boot/dts/tegra124.dtsi | 60 +++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 66b4451eb2ca..0e24ecd71ac7 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1931,44 +1931,32 @@
thermal-zones {
cpu {
trips {
- trip@0 {
+ cpu-shutdown-trip {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
-
- cooling-maps {
- /* There are currently no cooling maps because there are no cooling devices */
- };
};
mem {
trips {
- trip@0 {
+ mem-shutdown-trip {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
-
- cooling-maps {
- /* There are currently no cooling maps because there are no cooling devices */
- };
};
gpu {
trips {
- trip@0 {
+ gpu-shutdown-trip {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
-
- cooling-maps {
- /* There are currently no cooling maps because there are no cooling devices */
- };
};
};
};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 68669f791c8b..076a384848ba 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -996,6 +996,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
mem {
@@ -1004,6 +1019,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
gpu {
@@ -1012,6 +1042,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu-shutdown-trip {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
pllx {
@@ -1020,6 +1065,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
};
--
1.9.1
Hi Eduardo,
I resent this V9 series in one mail thread.
Thanks.
Wei.
On 2016年03月29日 18:29, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
> Main changes from V8:
> 1. Rebase patches on Eduardo's fixes branch.
> 1. Fix some style warning.
>
> Main changes from V7:
> 1. Split PM support patch into three smaller patches.
> 2. Few changes per Eduardo's comments.
>
> Main changes from V6:
> 1. rebased patches on Eduardo's
> [PATCH 00/13] thermal: convert users of thermal_zone_of_sensor_register to devm_
>
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
>
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
>
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
>
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
>
> The v8 series is in:
> https://lkml.org/lkml/2016/3/16/228
> The v7 series is in:
> https://lkml.org/lkml/2016/3/10/752
> The v6 series is in:
> https://lkml.org/lkml/2016/2/22/66
> The v5 series is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 series is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 series is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 series is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 series is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
>
> Wei Ni (14):
> thermal: tegra: move tegra thermal files into tegra directory
> thermal: tegra: combine sensor group-related data
> thermal: tegra: get rid of PDIV/HOTSPOT hack
> thermal: tegra: split tegra_soctherm driver
> thermal: tegra: add Tegra210 specific SOC_THERM driver
> thermal: tegra: add a debugfs to show registers
> thermal: of-thermal: allow setting trip_temp on hardware
> of: add notes of critical trips for soctherm
> thermal: tegra: add thermtrip function
> thermal: tegra: handle clocks in one function
> thermal: tegra: handle HW initialization in one funcotion
> thermal: tegra: add PM support
> arm64: tegra: add soctherm node for Tegra210
> arm: tegra: set critical trips for Tegra124
>
> .../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 18 +-
> arch/arm/boot/dts/tegra124.dtsi | 60 ++
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 104 ++++
> drivers/thermal/Kconfig | 12 +-
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/of-thermal.c | 8 +
> drivers/thermal/tegra/Kconfig | 13 +
> drivers/thermal/tegra/Makefile | 5 +
> drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
> drivers/thermal/tegra/soctherm.c | 682 +++++++++++++++++++++
> drivers/thermal/tegra/soctherm.h | 123 ++++
> drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
> drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
> drivers/thermal/tegra_soctherm.c | 463 --------------
> include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
> include/linux/thermal.h | 1 +
> 17 files changed, 1577 insertions(+), 489 deletions(-)
> create mode 100644 drivers/thermal/tegra/Kconfig
> create mode 100644 drivers/thermal/tegra/Makefile
> create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
> create mode 100644 drivers/thermal/tegra/soctherm.c
> create mode 100644 drivers/thermal/tegra/soctherm.h
> create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
> create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
> delete mode 100644 drivers/thermal/tegra_soctherm.c
>
On Tue, Mar 29, 2016 at 06:36:48PM +0800, Wei Ni wrote:
> Hi Eduardo,
> I resent this V9 series in one mail thread.
I personally prefer in one mail thread, like
you did here. But It is fine for me if you send either way,
in one mail thread or each patch in its own thread.
What I found strange is that in your v8 patches from 1 to 4 have the
message id of patch 0 in its in-reply-to field (one email thread). But
patches 5 to 14 don't (each patch in a single thread). Which made me
wonder if this is a bug in git send email of if you intentionally did
that, for some reason.
BTW, now the patch series applies fine.
BR,
Eduardo Valentin
On Tue, Mar 29, 2016 at 06:29:23PM +0800, Wei Ni wrote:
> Adds soctherm node for Tegra210, and add cpu,
> gpu, mem, pllx as thermal-zones. Set critical
> trip temperatures for them.
>
> Signed-off-by: Wei Ni <[email protected]>
Acked-by: Eduardo Valentin <[email protected]>
On Tue, Mar 29, 2016 at 06:29:24PM +0800, Wei Ni wrote:
> Set general "critical" trip temperatures for cpu, gpu, mem and pllx
> thermal zones for all Tegra124 platform, these trips can trigger
> shut down or reset.
> Tegra124 Jetson TK1 was already set "critical" trips before, so it
> can overwrite the general values.
>
> Signed-off-by: Wei Ni <[email protected]>
Acked-by: Eduardo Valentin <[email protected]>
On Tue, Mar 29, 2016 at 06:29:10PM +0800, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
Added to my fixes branch patches 1 to 12. Patches 13 and 14 need to go
via your platform tree.
BR,
Eduardo Valentin
Hi Thierry & Stephen,
The driver patches in this series were taken by Eduardo, so do know who can take
these tow dts patches 13 and 14?
Thanks.
Wei.
On 2016年03月29日 23:16, Eduardo Valentin wrote:
> On Tue, Mar 29, 2016 at 06:29:23PM +0800, Wei Ni wrote:
>> Adds soctherm node for Tegra210, and add cpu,
>> gpu, mem, pllx as thermal-zones. Set critical
>> trip temperatures for them.
>>
>> Signed-off-by: Wei Ni <[email protected]>
>
> Acked-by: Eduardo Valentin <[email protected]>
>
To: Rob Herring <[email protected]>
On 2016年03月30日 11:24, Wei Ni wrote:
> Hi Thierry & Stephen,
> The driver patches in this series were taken by Eduardo, so do know who can take
> these tow dts patches 13 and 14?
>
> Thanks.
> Wei.
>
> On 2016年03月29日 23:16, Eduardo Valentin wrote:
>> On Tue, Mar 29, 2016 at 06:29:23PM +0800, Wei Ni wrote:
>>> Adds soctherm node for Tegra210, and add cpu,
>>> gpu, mem, pllx as thermal-zones. Set critical
>>> trip temperatures for them.
>>>
>>> Signed-off-by: Wei Ni <[email protected]>
>>
>> Acked-by: Eduardo Valentin <[email protected]>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
To: Rob Herring <[email protected]>
On 2016年03月29日 18:29, Wei Ni wrote:
> Set general "critical" trip temperatures for cpu, gpu, mem and pllx
> thermal zones for all Tegra124 platform, these trips can trigger
> shut down or reset.
> Tegra124 Jetson TK1 was already set "critical" trips before, so it
> can overwrite the general values.
>
> Signed-off-by: Wei Ni <[email protected]>
> ---
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 18 ++--------
> arch/arm/boot/dts/tegra124.dtsi | 60 +++++++++++++++++++++++++++++++
> 2 files changed, 63 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 66b4451eb2ca..0e24ecd71ac7 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -1931,44 +1931,32 @@
> thermal-zones {
> cpu {
> trips {
> - trip@0 {
> + cpu-shutdown-trip {
> temperature = <101000>;
> hysteresis = <0>;
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - /* There are currently no cooling maps because there are no cooling devices */
> - };
> };
>
> mem {
> trips {
> - trip@0 {
> + mem-shutdown-trip {
> temperature = <101000>;
> hysteresis = <0>;
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - /* There are currently no cooling maps because there are no cooling devices */
> - };
> };
>
> gpu {
> trips {
> - trip@0 {
> + gpu-shutdown-trip {
> temperature = <101000>;
> hysteresis = <0>;
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - /* There are currently no cooling maps because there are no cooling devices */
> - };
> };
> };
> };
> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
> index 68669f791c8b..076a384848ba 100644
> --- a/arch/arm/boot/dts/tegra124.dtsi
> +++ b/arch/arm/boot/dts/tegra124.dtsi
> @@ -996,6 +996,21 @@
>
> thermal-sensors =
> <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
> +
> + trips {
> + cpu-shutdown-trip {
> + temperature = <103000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + /*
> + * There are currently no cooling maps,
> + * because there are no cooling devices.
> + */
> + };
> };
>
> mem {
> @@ -1004,6 +1019,21 @@
>
> thermal-sensors =
> <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
> +
> + trips {
> + mem-shutdown-trip {
> + temperature = <103000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + /*
> + * There are currently no cooling maps,
> + * because there are no cooling devices.
> + */
> + };
> };
>
> gpu {
> @@ -1012,6 +1042,21 @@
>
> thermal-sensors =
> <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
> +
> + trips {
> + gpu-shutdown-trip {
> + temperature = <101000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + /*
> + * There are currently no cooling maps,
> + * because there are no cooling devices.
> + */
> + };
> };
>
> pllx {
> @@ -1020,6 +1065,21 @@
>
> thermal-sensors =
> <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
> +
> + trips {
> + pllx-shutdown-trip {
> + temperature = <103000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + /*
> + * There are currently no cooling maps,
> + * because there are no cooling devices.
> + */
> + };
> };
> };
>
>
Patches 1 to 12 in this series were accepted by Eduardo.
Patches 13 and 14 need to go via platform or dt tree.
Used get_maintainer.pl to get maintainers and open list, add them in To: and Cc:
list.
To:
Rob Herring <[email protected]>
Pawel Moll <[email protected]>
Mark Rutland <[email protected]>
Ian Campbell <[email protected]>
Kumar Gala <[email protected]>
Cc:
[email protected]
On 2016年03月29日 23:16, Eduardo Valentin wrote:
> On Tue, Mar 29, 2016 at 06:29:23PM +0800, Wei Ni wrote:
>> Adds soctherm node for Tegra210, and add cpu,
>> gpu, mem, pllx as thermal-zones. Set critical
>> trip temperatures for them.
>>
>> Signed-off-by: Wei Ni <[email protected]>
>
> Acked-by: Eduardo Valentin <[email protected]>
>
To:
Rob Herring <[email protected]>
Pawel Moll <[email protected]>
Mark Rutland <[email protected]>
Ian Campbell <[email protected]>
Kumar Gala <[email protected]>
Cc:
[email protected]
On 2016年03月29日 23:17, Eduardo Valentin wrote:
> On Tue, Mar 29, 2016 at 06:29:24PM +0800, Wei Ni wrote:
>> Set general "critical" trip temperatures for cpu, gpu, mem and pllx
>> thermal zones for all Tegra124 platform, these trips can trigger
>> shut down or reset.
>> Tegra124 Jetson TK1 was already set "critical" trips before, so it
>> can overwrite the general values.
>>
>> Signed-off-by: Wei Ni <[email protected]>
>
> Acked-by: Eduardo Valentin <[email protected]>
>
Could anyone take a look this patch?
On 2016年04月01日 15:01, Wei Ni wrote:
> Patches 1 to 12 in this series were accepted by Eduardo.
> Patches 13 and 14 need to go via platform or dt tree.
>
> Used get_maintainer.pl to get maintainers and open list, add them in To: and Cc:
> list.
>
> To:
> Rob Herring <[email protected]>
> Pawel Moll <[email protected]>
> Mark Rutland <[email protected]>
> Ian Campbell <[email protected]>
> Kumar Gala <[email protected]>
>
> Cc:
> [email protected]
>
> On 2016年03月29日 23:16, Eduardo Valentin wrote:
>> On Tue, Mar 29, 2016 at 06:29:23PM +0800, Wei Ni wrote:
>>> Adds soctherm node for Tegra210, and add cpu,
>>> gpu, mem, pllx as thermal-zones. Set critical
>>> trip temperatures for them.
>>>
>>> Signed-off-by: Wei Ni <[email protected]>
>>
>> Acked-by: Eduardo Valentin <[email protected]>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Could anyone take a look at this patch?
On 2016年04月01日 15:04, Wei Ni wrote:
> To:
> Rob Herring <[email protected]>
> Pawel Moll <[email protected]>
> Mark Rutland <[email protected]>
> Ian Campbell <[email protected]>
> Kumar Gala <[email protected]>
>
> Cc:
> [email protected]
>
> On 2016年03月29日 23:17, Eduardo Valentin wrote:
>> On Tue, Mar 29, 2016 at 06:29:24PM +0800, Wei Ni wrote:
>>> Set general "critical" trip temperatures for cpu, gpu, mem and pllx
>>> thermal zones for all Tegra124 platform, these trips can trigger
>>> shut down or reset.
>>> Tegra124 Jetson TK1 was already set "critical" trips before, so it
>>> can overwrite the general values.
>>>
>>> Signed-off-by: Wei Ni <[email protected]>
>>
>> Acked-by: Eduardo Valentin <[email protected]>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Hi Thierry,
Do you know who can take these patch 13 and 14?
The corresponding driver was merged to linux-next several weeks ago.
Does I need to send these two patches again?
Thanks.
Wei.
On 2016年04月12日 16:53, Wei Ni wrote:
> Could anyone take a look this patch?
>
> On 2016年04月01日 15:01, Wei Ni wrote:
>> Patches 1 to 12 in this series were accepted by Eduardo.
>> Patches 13 and 14 need to go via platform or dt tree.
>>
>> Used get_maintainer.pl to get maintainers and open list, add them in To: and Cc:
>> list.
>>
>> To:
>> Rob Herring <[email protected]>
>> Pawel Moll <[email protected]>
>> Mark Rutland <[email protected]>
>> Ian Campbell <[email protected]>
>> Kumar Gala <[email protected]>
>>
>> Cc:
>> [email protected]
>>
>> On 2016年03月29日 23:16, Eduardo Valentin wrote:
>>> On Tue, Mar 29, 2016 at 06:29:23PM +0800, Wei Ni wrote:
>>>> Adds soctherm node for Tegra210, and add cpu,
>>>> gpu, mem, pllx as thermal-zones. Set critical
>>>> trip temperatures for them.
>>>>
>>>> Signed-off-by: Wei Ni <[email protected]>
>>>
>>> Acked-by: Eduardo Valentin <[email protected]>
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>