2017-07-17 14:28:22

by Paul Kocialkowski

[permalink] [raw]
Subject: [PATCH] drm/i915: Explicit the connector name for DP link training result

This adds the connector name when printing a debug message about the DP
link training result. It is useful to figure out what connector is
failing when multiple DP connectors are used.

Signed-off-by: Paul Kocialkowski <[email protected]>
---
drivers/gpu/drm/i915/intel_dp_link_training.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
index b79c1c0e404c..75a411c94ce5 100644
--- a/drivers/gpu/drm/i915/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
@@ -321,13 +321,15 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
if (!intel_dp_link_training_channel_equalization(intel_dp))
goto failure_handling;

- DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane count = %d",
- intel_dp->link_rate, intel_dp->lane_count);
+ DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane count = %d for connector %s",
+ intel_dp->link_rate, intel_dp->lane_count,
+ intel_connector->base.name);
return;

failure_handling:
- DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane count = %d",
- intel_dp->link_rate, intel_dp->lane_count);
+ DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane count = %d for connector %s",
+ intel_dp->link_rate, intel_dp->lane_count,
+ intel_connector->base.name);
if (!intel_dp_get_link_train_fallback_values(intel_dp,
intel_dp->link_rate,
intel_dp->lane_count))
--
2.13.2


2017-07-18 07:38:35

by Jani Nikula

[permalink] [raw]
Subject: Re: [PATCH] drm/i915: Explicit the connector name for DP link training result

On Mon, 17 Jul 2017, Paul Kocialkowski <[email protected]> wrote:
> This adds the connector name when printing a debug message about the DP
> link training result. It is useful to figure out what connector is
> failing when multiple DP connectors are used.

Perhaps more consistent would be using a prefix like this:

DRM_DEBUG_KMS("[CONNECTOR:%d:%s] bla bla blaa\n",
connector->base.base.id, connector->base.name);

BR,
Jani.

>
> Signed-off-by: Paul Kocialkowski <[email protected]>
> ---
> drivers/gpu/drm/i915/intel_dp_link_training.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> index b79c1c0e404c..75a411c94ce5 100644
> --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> @@ -321,13 +321,15 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> if (!intel_dp_link_training_channel_equalization(intel_dp))
> goto failure_handling;
>
> - DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane count = %d",
> - intel_dp->link_rate, intel_dp->lane_count);
> + DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane count = %d for connector %s",
> + intel_dp->link_rate, intel_dp->lane_count,
> + intel_connector->base.name);
> return;
>
> failure_handling:
> - DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane count = %d",
> - intel_dp->link_rate, intel_dp->lane_count);
> + DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane count = %d for connector %s",
> + intel_dp->link_rate, intel_dp->lane_count,
> + intel_connector->base.name);
> if (!intel_dp_get_link_train_fallback_values(intel_dp,
> intel_dp->link_rate,
> intel_dp->lane_count))

--
Jani Nikula, Intel Open Source Technology Center

2017-07-18 11:28:35

by Paul Kocialkowski

[permalink] [raw]
Subject: Re: [PATCH] drm/i915: Explicit the connector name for DP link training result

Hey,

On Tue, 2017-07-18 at 10:38 +0300, Jani Nikula wrote:
> On Mon, 17 Jul 2017, Paul Kocialkowski <[email protected].
> com> wrote:
> > This adds the connector name when printing a debug message about the
> > DP
> > link training result. It is useful to figure out what connector is
> > failing when multiple DP connectors are used.
>
> Perhaps more consistent would be using a prefix like this:
>
> DRM_DEBUG_KMS("[CONNECTOR:%d:%s] bla bla blaa\n",
> connector->base.base.id, connector->base.name);

You are definitely right, this is what is used all over the place in the
driver, so I should stick to it.

Thanks for the suggestion, I will send out v2 in that direction shortly.

Cheers,

Paul

> > Signed-off-by: Paul Kocialkowski <[email protected]>
> > ---
> > drivers/gpu/drm/i915/intel_dp_link_training.c | 10 ++++++----
> > 1 file changed, 6 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c
> > b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > index b79c1c0e404c..75a411c94ce5 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > @@ -321,13 +321,15 @@ intel_dp_start_link_train(struct intel_dp
> > *intel_dp)
> > if (!intel_dp_link_training_channel_equalization(intel_dp))
> > goto failure_handling;
> >
> > - DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane
> > count = %d",
> > - intel_dp->link_rate, intel_dp->lane_count);
> > + DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane
> > count = %d for connector %s",
> > + intel_dp->link_rate, intel_dp->lane_count,
> > + intel_connector->base.name);
> > return;
> >
> > failure_handling:
> > - DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane
> > count = %d",
> > - intel_dp->link_rate, intel_dp->lane_count);
> > + DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane
> > count = %d for connector %s",
> > + intel_dp->link_rate, intel_dp->lane_count,
> > + intel_connector->base.name);
> > if (!intel_dp_get_link_train_fallback_values(intel_dp,
> > intel_dp-
> > >link_rate,
> > intel_dp-
> > >lane_count))
>
>
--
Paul Kocialkowski <[email protected]>
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo, Finland