This is version four of my patchset to enable drivers to use
io{read|write}64 on all arches.
Changes since v3:
- I noticed powerpc didn't use the appropriate functions seeing
readq/writeq were not defined when iomap.h was included. Thus I've
included a patch to adjust this
- Fixed some mistakes with a couple of the defines in io-64-nonatomic*
headers
- Fixed a typo noticed by Horia.
Horia Geantă (1):
crypto: caam: cleanup CONFIG_64BIT ifdefs when using io{read|write}64
Logan Gunthorpe (4):
powerpc: io.h: move iomap.h include so that it can use readq/writeq
defs
iomap: introduce io{read|write}64_{lo_hi|hi_lo}
io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
arch/powerpc/include/asm/io.h | 6 +-
drivers/crypto/caam/regs.h | 35 ++-------
drivers/ntb/hw/intel/ntb_hw_intel.c | 30 +-------
include/asm-generic/iomap.h | 26 +++++--
include/linux/io-64-nonatomic-hi-lo.h | 60 ++++++++++++++++
include/linux/io-64-nonatomic-lo-hi.h | 60 ++++++++++++++++
lib/iomap.c | 132 ++++++++++++++++++++++++++++++++++
7 files changed, 282 insertions(+), 67 deletions(-)
--
2.11.0
This patch adds generic io{read|write}64[be]{_lo_hi|_hi_lo} macros if
they are not already defined by the architecture. (As they are provided
by the generic iomap library).
The patch also points io{read|write}64[be] to the variant specified by the
header name.
This is because new drivers are encouraged to use ioreadXX, et al instead
of readX[1], et al -- and mixing ioreadXX with readq is pretty ugly.
[1] ldd3: section 9.4.2
Signed-off-by: Logan Gunthorpe <[email protected]>
cc: Christoph Hellwig <[email protected]>
cc: Arnd Bergmann <[email protected]>
cc: Alan Cox <[email protected]>
cc: Greg Kroah-Hartman <[email protected]>
---
include/linux/io-64-nonatomic-hi-lo.h | 60 +++++++++++++++++++++++++++++++++++
include/linux/io-64-nonatomic-lo-hi.h | 60 +++++++++++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
diff --git a/include/linux/io-64-nonatomic-hi-lo.h b/include/linux/io-64-nonatomic-hi-lo.h
index defcc4644ce3..31d28e981299 100644
--- a/include/linux/io-64-nonatomic-hi-lo.h
+++ b/include/linux/io-64-nonatomic-hi-lo.h
@@ -54,4 +54,64 @@ static inline void hi_lo_writeq_relaxed(__u64 val, volatile void __iomem *addr)
#define writeq_relaxed hi_lo_writeq_relaxed
#endif
+#ifndef ioread64_hi_lo
+#define ioread64_hi_lo ioread64_hi_lo
+static inline u64 ioread64_hi_lo(void __iomem *addr)
+{
+ u32 low, high;
+
+ high = ioread32(addr + sizeof(u32));
+ low = ioread32(addr);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64_hi_lo
+#define iowrite64_hi_lo iowrite64_hi_lo
+static inline void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+ iowrite32(val >> 32, addr + sizeof(u32));
+ iowrite32(val, addr);
+}
+#endif
+
+#ifndef ioread64be_hi_lo
+#define ioread64be_hi_lo ioread64be_hi_lo
+static inline u64 ioread64be_hi_lo(void __iomem *addr)
+{
+ u32 low, high;
+
+ high = ioread32be(addr);
+ low = ioread32be(addr + sizeof(u32));
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64be_hi_lo
+#define iowrite64be_hi_lo iowrite64be_hi_lo
+static inline void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+ iowrite32be(val >> 32, addr);
+ iowrite32be(val, addr + sizeof(u32));
+}
+#endif
+
+#ifndef ioread64
+#define ioread64 ioread64_hi_lo
+#endif
+
+#ifndef iowrite64
+#define iowrite64 iowrite64_hi_lo
+#endif
+
+#ifndef ioread64be
+#define ioread64be ioread64be_hi_lo
+#endif
+
+#ifndef iowrite64be
+#define iowrite64be iowrite64be_hi_lo
+#endif
+
#endif /* _LINUX_IO_64_NONATOMIC_HI_LO_H_ */
diff --git a/include/linux/io-64-nonatomic-lo-hi.h b/include/linux/io-64-nonatomic-lo-hi.h
index 084461a4e5ab..437a34f20f5a 100644
--- a/include/linux/io-64-nonatomic-lo-hi.h
+++ b/include/linux/io-64-nonatomic-lo-hi.h
@@ -54,4 +54,64 @@ static inline void lo_hi_writeq_relaxed(__u64 val, volatile void __iomem *addr)
#define writeq_relaxed lo_hi_writeq_relaxed
#endif
+#ifndef ioread64_lo_hi
+#define ioread64_lo_hi ioread64_lo_hi
+static inline u64 ioread64_lo_hi(void __iomem *addr)
+{
+ u32 low, high;
+
+ low = ioread32(addr);
+ high = ioread32(addr + sizeof(u32));
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64_lo_hi
+#define iowrite64_lo_hi iowrite64_lo_hi
+static inline void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+ iowrite32(val >> 32, addr + sizeof(u32));
+}
+#endif
+
+#ifndef ioread64be_lo_hi
+#define ioread64be_lo_hi ioread64be_lo_hi
+static inline u64 ioread64be_lo_hi(void __iomem *addr)
+{
+ u32 low, high;
+
+ low = ioread32be(addr + sizeof(u32));
+ high = ioread32be(addr);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64be_lo_hi
+#define iowrite64be_lo_hi iowrite64be_lo_hi
+static inline void iowrite64be_lo_hi(u64 val, void __iomem *addr)
+{
+ iowrite32be(val, addr + sizeof(u32));
+ iowrite32be(val >> 32, addr);
+}
+#endif
+
+#ifndef ioread64
+#define ioread64 ioread64_lo_hi
+#endif
+
+#ifndef iowrite64
+#define iowrite64 iowrite64_lo_hi
+#endif
+
+#ifndef ioread64be
+#define ioread64be ioread64be_lo_hi
+#endif
+
+#ifndef iowrite64be
+#define iowrite64be iowrite64be_lo_hi
+#endif
+
#endif /* _LINUX_IO_64_NONATOMIC_LO_HI_H_ */
--
2.11.0
Subsequent patches in this series makes use of the readq and writeq
defines in iomap.h. However, as is, they get missed on the powerpc
platform seeing the include comes before the define. This patch
moves the include down to fix this.
Signed-off-by: Logan Gunthorpe <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Suresh Warrier <[email protected]>
Cc: "Oliver O'Halloran" <[email protected]>
---
arch/powerpc/include/asm/io.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 422f99cf9924..af074923d598 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -33,8 +33,6 @@ extern struct pci_dev *isa_bridge_pcidev;
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
-#include <asm-generic/iomap.h>
-
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#endif
@@ -663,6 +661,8 @@ static inline void name at \
#define writel_relaxed(v, addr) writel(v, addr)
#define writeq_relaxed(v, addr) writeq(v, addr)
+#include <asm-generic/iomap.h>
+
#ifdef CONFIG_PPC32
#define mmiowb()
#else
--
2.11.0
In order to provide non-atomic functions for io{read|write}64 that will
use readq and writeq when appropriate. We define a number of variants
of these functions in the generic iomap that will do non-atomic
operations on pio but atomic operations on mmio.
These functions are only defined if readq and writeq are defined. If
they are not, then the wrappers that always use non-atomic operations
from include/linux/io-64-nonatomic*.h will be used.
Signed-off-by: Logan Gunthorpe <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Suresh Warrier <[email protected]>
Cc: Nicholas Piggin <[email protected]>
---
arch/powerpc/include/asm/io.h | 2 +
include/asm-generic/iomap.h | 26 +++++++--
lib/iomap.c | 132 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 154 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index af074923d598..4cc420cfaa78 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -788,8 +788,10 @@ extern void __iounmap_at(void *ea, unsigned long size);
#define mmio_read16be(addr) readw_be(addr)
#define mmio_read32be(addr) readl_be(addr)
+#define mmio_read64be(addr) readq_be(addr)
#define mmio_write16be(val, addr) writew_be(val, addr)
#define mmio_write32be(val, addr) writel_be(val, addr)
+#define mmio_write64be(val, addr) writeq_be(val, addr)
#define mmio_insb(addr, dst, count) readsb(addr, dst, count)
#define mmio_insw(addr, dst, count) readsw(addr, dst, count)
#define mmio_insl(addr, dst, count) readsl(addr, dst, count)
diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
index 650fede33c25..e4601455ac4a 100644
--- a/include/asm-generic/iomap.h
+++ b/include/asm-generic/iomap.h
@@ -30,9 +30,16 @@ extern unsigned int ioread16(void __iomem *);
extern unsigned int ioread16be(void __iomem *);
extern unsigned int ioread32(void __iomem *);
extern unsigned int ioread32be(void __iomem *);
-#ifdef CONFIG_64BIT
-extern u64 ioread64(void __iomem *);
-extern u64 ioread64be(void __iomem *);
+
+#ifdef readq
+#define ioread64_lo_hi ioread64_lo_hi
+#define ioread64_hi_lo ioread64_hi_lo
+#define ioread64be_lo_hi ioread64be_lo_hi
+#define ioread64be_hi_lo ioread64be_hi_lo
+extern u64 ioread64_lo_hi(void __iomem *addr);
+extern u64 ioread64_hi_lo(void __iomem *addr);
+extern u64 ioread64be_lo_hi(void __iomem *addr);
+extern u64 ioread64be_hi_lo(void __iomem *addr);
#endif
extern void iowrite8(u8, void __iomem *);
@@ -40,9 +47,16 @@ extern void iowrite16(u16, void __iomem *);
extern void iowrite16be(u16, void __iomem *);
extern void iowrite32(u32, void __iomem *);
extern void iowrite32be(u32, void __iomem *);
-#ifdef CONFIG_64BIT
-extern void iowrite64(u64, void __iomem *);
-extern void iowrite64be(u64, void __iomem *);
+
+#ifdef writeq
+#define iowrite64_lo_hi iowrite64_lo_hi
+#define iowrite64_hi_lo iowrite64_hi_lo
+#define iowrite64be_lo_hi iowrite64be_lo_hi
+#define iowrite64be_hi_lo iowrite64be_hi_lo
+void iowrite64_lo_hi(u64 val, void __iomem *addr);
+void iowrite64_hi_lo(u64 val, void __iomem *addr);
+void iowrite64be_lo_hi(u64 val, void __iomem *addr);
+void iowrite64be_hi_lo(u64 val, void __iomem *addr);
#endif
/*
diff --git a/lib/iomap.c b/lib/iomap.c
index fc3dcb4b238e..b993400d60bd 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -66,6 +66,7 @@ static void bad_io_access(unsigned long port, const char *access)
#ifndef mmio_read16be
#define mmio_read16be(addr) be16_to_cpu(__raw_readw(addr))
#define mmio_read32be(addr) be32_to_cpu(__raw_readl(addr))
+#define mmio_read64be(addr) be64_to_cpu(__raw_readq(addr))
#endif
unsigned int ioread8(void __iomem *addr)
@@ -99,6 +100,80 @@ EXPORT_SYMBOL(ioread16be);
EXPORT_SYMBOL(ioread32);
EXPORT_SYMBOL(ioread32be);
+#ifdef readq
+static u64 pio_read64_lo_hi(unsigned long port)
+{
+ u64 lo, hi;
+
+ lo = inl(port);
+ hi = inl(port + sizeof(u32));
+
+ return lo | (hi << 32);
+}
+
+static u64 pio_read64_hi_lo(unsigned long port)
+{
+ u64 lo, hi;
+
+ hi = inl(port + sizeof(u32));
+ lo = inl(port);
+
+ return lo | (hi << 32);
+}
+
+static u64 pio_read64be_lo_hi(unsigned long port)
+{
+ u64 lo, hi;
+
+ lo = pio_read32be(port + sizeof(u32));
+ hi = pio_read32be(port);
+
+ return lo | (hi << 32);
+}
+
+static u64 pio_read64be_hi_lo(unsigned long port)
+{
+ u64 lo, hi;
+
+ hi = pio_read32be(port);
+ lo = pio_read32be(port + sizeof(u32));
+
+ return lo | (hi << 32);
+}
+
+u64 ioread64_lo_hi(void __iomem *addr)
+{
+ IO_COND(addr, return pio_read64_lo_hi(port), return readq(addr));
+ return 0xffffffffffffffffLL;
+}
+
+u64 ioread64_hi_lo(void __iomem *addr)
+{
+ IO_COND(addr, return pio_read64_hi_lo(port), return readq(addr));
+ return 0xffffffffffffffffLL;
+}
+
+u64 ioread64be_lo_hi(void __iomem *addr)
+{
+ IO_COND(addr, return pio_read64be_lo_hi(port),
+ return mmio_read64be(addr));
+ return 0xffffffffffffffffLL;
+}
+
+u64 ioread64be_hi_lo(void __iomem *addr)
+{
+ IO_COND(addr, return pio_read64be_hi_lo(port),
+ return mmio_read64be(addr));
+ return 0xffffffffffffffffLL;
+}
+
+EXPORT_SYMBOL(ioread64_lo_hi);
+EXPORT_SYMBOL(ioread64_hi_lo);
+EXPORT_SYMBOL(ioread64be_lo_hi);
+EXPORT_SYMBOL(ioread64be_hi_lo);
+
+#endif /* readq */
+
#ifndef pio_write16be
#define pio_write16be(val,port) outw(swab16(val),port)
#define pio_write32be(val,port) outl(swab32(val),port)
@@ -107,6 +182,7 @@ EXPORT_SYMBOL(ioread32be);
#ifndef mmio_write16be
#define mmio_write16be(val,port) __raw_writew(be16_to_cpu(val),port)
#define mmio_write32be(val,port) __raw_writel(be32_to_cpu(val),port)
+#define mmio_write64be(val,port) __raw_writeq(be64_to_cpu(val),port)
#endif
void iowrite8(u8 val, void __iomem *addr)
@@ -135,6 +211,62 @@ EXPORT_SYMBOL(iowrite16be);
EXPORT_SYMBOL(iowrite32);
EXPORT_SYMBOL(iowrite32be);
+#ifdef writeq
+static void pio_write64_lo_hi(u64 val, unsigned long port)
+{
+ outl(val, port);
+ outl(val >> 32, port + sizeof(u32));
+}
+
+static void pio_write64_hi_lo(u64 val, unsigned long port)
+{
+ outl(val >> 32, port + sizeof(u32));
+ outl(val, port);
+}
+
+static void pio_write64be_lo_hi(u64 val, unsigned long port)
+{
+ pio_write32be(val, port + sizeof(u32));
+ pio_write32be(val >> 32, port);
+}
+
+static void pio_write64be_hi_lo(u64 val, unsigned long port)
+{
+ pio_write32be(val >> 32, port);
+ pio_write32be(val, port + sizeof(u32));
+}
+
+void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+ IO_COND(addr, pio_write64_lo_hi(val, port),
+ writeq(val, addr));
+}
+
+void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+ IO_COND(addr, pio_write64_hi_lo(val, port),
+ writeq(val, addr));
+}
+
+void iowrite64be_lo_hi(u64 val, void __iomem *addr)
+{
+ IO_COND(addr, pio_write64be_lo_hi(val, port),
+ mmio_write64be(val, addr));
+}
+
+void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+ IO_COND(addr, pio_write64be_hi_lo(val, port),
+ mmio_write64be(val, addr));
+}
+
+EXPORT_SYMBOL(iowrite64_lo_hi);
+EXPORT_SYMBOL(iowrite64_hi_lo);
+EXPORT_SYMBOL(iowrite64be_lo_hi);
+EXPORT_SYMBOL(iowrite64be_hi_lo);
+
+#endif /* readq */
+
/*
* These are the "repeat MMIO read/write" functions.
* Note the "__raw" accesses, since we don't want to
--
2.11.0
Now that ioread64 and iowrite64 are available in io-64-nonatomic,
we can remove the hack at the top of ntb_hw_intel.c and replace it
with an include.
Signed-off-by: Logan Gunthorpe <[email protected]>
Cc: Jon Mason <[email protected]>
Cc: Allen Hubbe <[email protected]>
Acked-by: Dave Jiang <[email protected]>
---
drivers/ntb/hw/intel/ntb_hw_intel.c | 30 +-----------------------------
1 file changed, 1 insertion(+), 29 deletions(-)
diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
index 2557e2c05b90..606c90f59d4b 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.c
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
@@ -59,6 +59,7 @@
#include <linux/random.h>
#include <linux/slab.h>
#include <linux/ntb.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#include "ntb_hw_intel.h"
@@ -155,35 +156,6 @@ MODULE_PARM_DESC(xeon_b2b_dsd_bar5_addr32,
static inline enum ntb_topo xeon_ppd_topo(struct intel_ntb_dev *ndev, u8 ppd);
static int xeon_init_isr(struct intel_ntb_dev *ndev);
-#ifndef ioread64
-#ifdef readq
-#define ioread64 readq
-#else
-#define ioread64 _ioread64
-static inline u64 _ioread64(void __iomem *mmio)
-{
- u64 low, high;
-
- low = ioread32(mmio);
- high = ioread32(mmio + sizeof(u32));
- return low | (high << 32);
-}
-#endif
-#endif
-
-#ifndef iowrite64
-#ifdef writeq
-#define iowrite64 writeq
-#else
-#define iowrite64 _iowrite64
-static inline void _iowrite64(u64 val, void __iomem *mmio)
-{
- iowrite32(val, mmio);
- iowrite32(val >> 32, mmio + sizeof(u32));
-}
-#endif
-#endif
-
static inline int pdev_is_atom(struct pci_dev *pdev)
{
switch (pdev->device) {
--
2.11.0
From: Horia Geantă <[email protected]>
We can now make use of the io-64-nonatomic-lo-hi header to always
provide 64 bit IO operations. So this patch cleans up the extra
CONFIG_64BIT ifdefs.
To be consistent with CAAM engine HW spec: in case of 64-bit registers,
irrespective of device endianness, the lower address should be read from
/ written to first, followed by the upper address. Indeed the I/O
accessors in CAAM driver currently don't follow the spec, however this
is a good opportunity to fix the code.
Signed-off-by: Horia Geantă <[email protected]>
Signed-off-by: Logan Gunthorpe <[email protected]>
Cc: Horia Geantă <[email protected]>
Cc: Dan Douglass <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: "David S. Miller" <[email protected]>
---
drivers/crypto/caam/regs.h | 35 +++++------------------------------
1 file changed, 5 insertions(+), 30 deletions(-)
diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h
index 84d2f838a063..0c45505458e7 100644
--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -9,7 +9,7 @@
#include <linux/types.h>
#include <linux/bitops.h>
-#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
/*
* Architecture-specific register access methods
@@ -134,50 +134,25 @@ static inline void clrsetbits_32(void __iomem *reg, u32 clear, u32 set)
* base + 0x0000 : least-significant 32 bits
* base + 0x0004 : most-significant 32 bits
*/
-#ifdef CONFIG_64BIT
static inline void wr_reg64(void __iomem *reg, u64 data)
{
+#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX
if (caam_little_end)
iowrite64(data, reg);
else
- iowrite64be(data, reg);
-}
-
-static inline u64 rd_reg64(void __iomem *reg)
-{
- if (caam_little_end)
- return ioread64(reg);
- else
- return ioread64be(reg);
-}
-
-#else /* CONFIG_64BIT */
-static inline void wr_reg64(void __iomem *reg, u64 data)
-{
-#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX
- if (caam_little_end) {
- wr_reg32((u32 __iomem *)(reg) + 1, data >> 32);
- wr_reg32((u32 __iomem *)(reg), data);
- } else
#endif
- {
- wr_reg32((u32 __iomem *)(reg), data >> 32);
- wr_reg32((u32 __iomem *)(reg) + 1, data);
- }
+ iowrite64be(data, reg);
}
static inline u64 rd_reg64(void __iomem *reg)
{
#ifndef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX
if (caam_little_end)
- return ((u64)rd_reg32((u32 __iomem *)(reg) + 1) << 32 |
- (u64)rd_reg32((u32 __iomem *)(reg)));
+ return ioread64(reg);
else
#endif
- return ((u64)rd_reg32((u32 __iomem *)(reg)) << 32 |
- (u64)rd_reg32((u32 __iomem *)(reg) + 1));
+ return ioread64be(reg);
}
-#endif /* CONFIG_64BIT */
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
#ifdef CONFIG_SOC_IMX7D
--
2.11.0
From: Logan Gunthorpe
> Now that ioread64 and iowrite64 are available in io-64-nonatomic,
> we can remove the hack at the top of ntb_hw_intel.c and replace it
> with an include.
>
> Signed-off-by: Logan Gunthorpe <[email protected]>
> Cc: Jon Mason <[email protected]>
> Cc: Allen Hubbe <[email protected]>
> Acked-by: Dave Jiang <[email protected]>
Acked-by: Allen Hubbe <[email protected]>
> ---
> drivers/ntb/hw/intel/ntb_hw_intel.c | 30 +-----------------------------
> 1 file changed, 1 insertion(+), 29 deletions(-)
>
> diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
> index 2557e2c05b90..606c90f59d4b 100644
> --- a/drivers/ntb/hw/intel/ntb_hw_intel.c
> +++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
> @@ -59,6 +59,7 @@
> #include <linux/random.h>
> #include <linux/slab.h>
> #include <linux/ntb.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
>
> #include "ntb_hw_intel.h"
>
> @@ -155,35 +156,6 @@ MODULE_PARM_DESC(xeon_b2b_dsd_bar5_addr32,
> static inline enum ntb_topo xeon_ppd_topo(struct intel_ntb_dev *ndev, u8 ppd);
> static int xeon_init_isr(struct intel_ntb_dev *ndev);
>
> -#ifndef ioread64
> -#ifdef readq
> -#define ioread64 readq
> -#else
> -#define ioread64 _ioread64
> -static inline u64 _ioread64(void __iomem *mmio)
> -{
> - u64 low, high;
> -
> - low = ioread32(mmio);
> - high = ioread32(mmio + sizeof(u32));
> - return low | (high << 32);
> -}
> -#endif
> -#endif
> -
> -#ifndef iowrite64
> -#ifdef writeq
> -#define iowrite64 writeq
> -#else
> -#define iowrite64 _iowrite64
> -static inline void _iowrite64(u64 val, void __iomem *mmio)
> -{
> - iowrite32(val, mmio);
> - iowrite32(val >> 32, mmio + sizeof(u32));
> -}
> -#endif
> -#endif
> -
> static inline int pdev_is_atom(struct pci_dev *pdev)
> {
> switch (pdev->device) {
> --
> 2.11.0
Logan Gunthorpe <[email protected]> writes:
> Subsequent patches in this series makes use of the readq and writeq
> defines in iomap.h. However, as is, they get missed on the powerpc
> platform seeing the include comes before the define. This patch
> moves the include down to fix this.
>
> Signed-off-by: Logan Gunthorpe <[email protected]>
> Cc: Benjamin Herrenschmidt <[email protected]>
> Cc: Paul Mackerras <[email protected]>
> Cc: Michael Ellerman <[email protected]>
> Cc: Nicholas Piggin <[email protected]>
> Cc: Suresh Warrier <[email protected]>
> Cc: "Oliver O'Halloran" <[email protected]>
> ---
> arch/powerpc/include/asm/io.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Seems fair enough, have you tested it at all?
cheers
On 18/07/17 11:57 PM, Michael Ellerman wrote:
> Seems fair enough, have you tested it at all?
It's only been compile tested and the kbuild robot has beat up on it a bit.
Thanks,
Logan
On 7/19/2017 7:04 PM, Logan Gunthorpe wrote:
>
>
> On 18/07/17 11:57 PM, Michael Ellerman wrote:
>> Seems fair enough, have you tested it at all?
>
> It's only been compile tested and the kbuild robot has beat up on it a bit.
>
Looks like the patch set does not compile on PPC (.config generated
using make corenet64_smp_defconfig):
[...]
LD vmlinux.o
MODPOST vmlinux.o
drivers/crypto/caam/jr.o: In function `rd_reg64':
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:154:
undefined reference to `.ioread64be_lo_hi'
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:151:
undefined reference to `.ioread64_lo_hi'
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:151:
undefined reference to `.ioread64_lo_hi'
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:154:
undefined reference to `.ioread64be_lo_hi'
drivers/crypto/caam/jr.o: In function `wr_reg64':
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:141:
undefined reference to `.iowrite64_lo_hi'
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:141:
undefined reference to `.iowrite64_lo_hi'
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:144:
undefined reference to `.iowrite64be_lo_hi'
/home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:144:
undefined reference to `.iowrite64be_lo_hi'
make: *** [vmlinux] Error 1
Regards,
Horia
Logan Gunthorpe <[email protected]> writes:
> On 18/07/17 11:57 PM, Michael Ellerman wrote:
>> Seems fair enough, have you tested it at all?
>
> It's only been compile tested and the kbuild robot has beat up on it a bit.
OK. I don't think I see any way it can break anything, so feel free to
merge it, it'll get boot testing on powerpc once it's in linux-next.
Acked-by: Michael Ellerman <[email protected]>
cheers
On 7/20/2017 1:27 PM, Horia Geant? wrote:
> On 7/19/2017 7:04 PM, Logan Gunthorpe wrote:
>>
>>
>> On 18/07/17 11:57 PM, Michael Ellerman wrote:
>>> Seems fair enough, have you tested it at all?
>>
>> It's only been compile tested and the kbuild robot has beat up on it a bit.
>>
> Looks like the patch set does not compile on PPC (.config generated
> using make corenet64_smp_defconfig):
>
> [...]
> LD vmlinux.o
> MODPOST vmlinux.o
> drivers/crypto/caam/jr.o: In function `rd_reg64':
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:154:
> undefined reference to `.ioread64be_lo_hi'
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:151:
> undefined reference to `.ioread64_lo_hi'
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:151:
> undefined reference to `.ioread64_lo_hi'
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:154:
> undefined reference to `.ioread64be_lo_hi'
> drivers/crypto/caam/jr.o: In function `wr_reg64':
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:141:
> undefined reference to `.iowrite64_lo_hi'
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:141:
> undefined reference to `.iowrite64_lo_hi'
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:144:
> undefined reference to `.iowrite64be_lo_hi'
> /home/b05471/repos/cryptodev-2.6/drivers/crypto/caam/regs.h:144:
> undefined reference to `.iowrite64be_lo_hi'
> make: *** [vmlinux] Error 1
>
include/asm-generic/iomap.h is included before
include/linux/io-64-nonatomic-lo-hi.h:
include/linux/io.h -> arch/powerpc/include/asm/io.h ->
include/asm-generic/iomap.h
Thus, the "extern" version of ioread64_lo_hi and friends will be used
(and not the inline version from io-64-nonatomic-lo-hi.h).
But for this kernel .config:
-CONFIG_GENERIC_IOMAP=n and
-there is no implementation of io{read|write}64[be]{_lo_hi|_hi_lo} in
arch/powerpc/kernel/iomap.c
Regards,
Horia
On 20/07/17 06:36 AM, Horia Geant? wrote:
> include/asm-generic/iomap.h is included before
> include/linux/io-64-nonatomic-lo-hi.h:
>
> include/linux/io.h -> arch/powerpc/include/asm/io.h ->
> include/asm-generic/iomap.h
>
> Thus, the "extern" version of ioread64_lo_hi and friends will be used
> (and not the inline version from io-64-nonatomic-lo-hi.h).
>
> But for this kernel .config:
> -CONFIG_GENERIC_IOMAP=n and
> -there is no implementation of io{read|write}64[be]{_lo_hi|_hi_lo} in
> arch/powerpc/kernel/iomap.c
Ah, thanks for the triage. I'll take a look at fixing this for a v5.
Logan