2017-08-11 08:23:39

by Rushikesh S Kadam

[permalink] [raw]
Subject: [PATCH] pinctrl: intel: Disable GPIO pin interrupts in suspend

The fix prevents unintended wakes from second level GPIO pin interrupts.

On some Intel Kabylake platforms, it is observed that GPIO pin interrupts
can wake the platform from suspend-to-idle, even though the IRQ is not
configured as IRQF_NO_SUSPEND or enable_irq_wake().

This can cause undesired wakes on Mobile devices such as Laptops and
Chromebook devices. For example a headset jack insertion is not a desired
wake source on Chromebook devices.

The pinctrl-intel (GPIO controller) driver implements a "Shared IRQ" model.
All GPIO pin interrupts are OR'ed and mapped to a first level IRQ14 (or
IRQ15). The driver registers an irq_chip struct and maps an irq_domain for
the GPIO pin interrupts. The IRQ14 handler demuxes and calls the second
level IRQ for the respective pin.

In the suspend entry flow, at suspend_noirq stage, the kernel disables IRQs
that are not marked for wake. The pinctrl-intel driver does not implement a
irq_disable() callback (to take advantage of lazy disabling). The
pinctrl-intel GPIO interrupts are not disabled in hardware during suspend
entry, and thus are able to wake the SoC out of suspend-to-idle.

This patch sets the IRQCHIP_MASK_ON_SUSPEND flag for the GPIO irq_chip, to
disable the second level interrupts at suspend_noirq stage via the irq_mask
callbacks. The irq_mask callback disables the IRQs in hardware by
programming the corresponding GPIO pad registers. Only IRQs that are not
marked for wake are disabled.

Signed-off-by: Rushikesh S Kadam <[email protected]>
---
drivers/pinctrl/intel/pinctrl-intel.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 6dc1096..8f87215 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -1035,6 +1035,7 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
.irq_unmask = intel_gpio_irq_unmask,
.irq_set_type = intel_gpio_irq_type,
.irq_set_wake = intel_gpio_irq_wake,
+ .flags = IRQCHIP_MASK_ON_SUSPEND,
};

static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
--
1.9.1


2017-08-11 08:59:15

by Mika Westerberg

[permalink] [raw]
Subject: Re: [PATCH] pinctrl: intel: Disable GPIO pin interrupts in suspend

On Fri, Aug 11, 2017 at 01:53:44PM +0530, Rushikesh S Kadam wrote:
> The fix prevents unintended wakes from second level GPIO pin interrupts.
>
> On some Intel Kabylake platforms, it is observed that GPIO pin interrupts
> can wake the platform from suspend-to-idle, even though the IRQ is not
> configured as IRQF_NO_SUSPEND or enable_irq_wake().
>
> This can cause undesired wakes on Mobile devices such as Laptops and
> Chromebook devices. For example a headset jack insertion is not a desired
> wake source on Chromebook devices.
>
> The pinctrl-intel (GPIO controller) driver implements a "Shared IRQ" model.
> All GPIO pin interrupts are OR'ed and mapped to a first level IRQ14 (or
> IRQ15). The driver registers an irq_chip struct and maps an irq_domain for
> the GPIO pin interrupts. The IRQ14 handler demuxes and calls the second
> level IRQ for the respective pin.
>
> In the suspend entry flow, at suspend_noirq stage, the kernel disables IRQs
> that are not marked for wake. The pinctrl-intel driver does not implement a
> irq_disable() callback (to take advantage of lazy disabling). The
> pinctrl-intel GPIO interrupts are not disabled in hardware during suspend
> entry, and thus are able to wake the SoC out of suspend-to-idle.
>
> This patch sets the IRQCHIP_MASK_ON_SUSPEND flag for the GPIO irq_chip, to
> disable the second level interrupts at suspend_noirq stage via the irq_mask
> callbacks. The irq_mask callback disables the IRQs in hardware by
> programming the corresponding GPIO pad registers. Only IRQs that are not
> marked for wake are disabled.

This is really good changelog!

> Signed-off-by: Rushikesh S Kadam <[email protected]>

Acked-by: Mika Westerberg <[email protected]>

2017-08-11 09:58:25

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [PATCH] pinctrl: intel: Disable GPIO pin interrupts in suspend

On Fri, Aug 11, 2017 at 11:23 AM, Rushikesh S Kadam
<[email protected]> wrote:
> The fix prevents unintended wakes from second level GPIO pin interrupts.
>
> On some Intel Kabylake platforms, it is observed that GPIO pin interrupts
> can wake the platform from suspend-to-idle, even though the IRQ is not
> configured as IRQF_NO_SUSPEND or enable_irq_wake().
>
> This can cause undesired wakes on Mobile devices such as Laptops and
> Chromebook devices. For example a headset jack insertion is not a desired
> wake source on Chromebook devices.
>
> The pinctrl-intel (GPIO controller) driver implements a "Shared IRQ" model.
> All GPIO pin interrupts are OR'ed and mapped to a first level IRQ14 (or
> IRQ15). The driver registers an irq_chip struct and maps an irq_domain for
> the GPIO pin interrupts. The IRQ14 handler demuxes and calls the second
> level IRQ for the respective pin.
>
> In the suspend entry flow, at suspend_noirq stage, the kernel disables IRQs
> that are not marked for wake. The pinctrl-intel driver does not implement a
> irq_disable() callback (to take advantage of lazy disabling). The
> pinctrl-intel GPIO interrupts are not disabled in hardware during suspend
> entry, and thus are able to wake the SoC out of suspend-to-idle.
>
> This patch sets the IRQCHIP_MASK_ON_SUSPEND flag for the GPIO irq_chip, to
> disable the second level interrupts at suspend_noirq stage via the irq_mask
> callbacks. The irq_mask callback disables the IRQs in hardware by
> programming the corresponding GPIO pad registers. Only IRQs that are not
> marked for wake are disabled.
>
> Signed-off-by: Rushikesh S Kadam <[email protected]>

Reviewed-by: Andy Shevchenko <[email protected]>

> ---
> drivers/pinctrl/intel/pinctrl-intel.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
> index 6dc1096..8f87215 100644
> --- a/drivers/pinctrl/intel/pinctrl-intel.c
> +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> @@ -1035,6 +1035,7 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
> .irq_unmask = intel_gpio_irq_unmask,
> .irq_set_type = intel_gpio_irq_type,
> .irq_set_wake = intel_gpio_irq_wake,
> + .flags = IRQCHIP_MASK_ON_SUSPEND,
> };
>
> static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
> --
> 1.9.1
>



--
With Best Regards,
Andy Shevchenko

2017-08-11 10:11:19

by Rajneesh Bhardwaj

[permalink] [raw]
Subject: Re: [PATCH] pinctrl: intel: Disable GPIO pin interrupts in suspend

On Fri, Aug 11, 2017 at 12:57:26PM +0300, Andy Shevchenko wrote:
> On Fri, Aug 11, 2017 at 11:23 AM, Rushikesh S Kadam
> <[email protected]> wrote:
> > The fix prevents unintended wakes from second level GPIO pin interrupts.
> >
> > On some Intel Kabylake platforms, it is observed that GPIO pin interrupts
> > can wake the platform from suspend-to-idle, even though the IRQ is not
> > configured as IRQF_NO_SUSPEND or enable_irq_wake().
> >
> > This can cause undesired wakes on Mobile devices such as Laptops and
> > Chromebook devices. For example a headset jack insertion is not a desired
> > wake source on Chromebook devices.
> >
> > The pinctrl-intel (GPIO controller) driver implements a "Shared IRQ" model.
> > All GPIO pin interrupts are OR'ed and mapped to a first level IRQ14 (or
> > IRQ15). The driver registers an irq_chip struct and maps an irq_domain for
> > the GPIO pin interrupts. The IRQ14 handler demuxes and calls the second
> > level IRQ for the respective pin.
> >
> > In the suspend entry flow, at suspend_noirq stage, the kernel disables IRQs
> > that are not marked for wake. The pinctrl-intel driver does not implement a
> > irq_disable() callback (to take advantage of lazy disabling). The
> > pinctrl-intel GPIO interrupts are not disabled in hardware during suspend
> > entry, and thus are able to wake the SoC out of suspend-to-idle.
> >
> > This patch sets the IRQCHIP_MASK_ON_SUSPEND flag for the GPIO irq_chip, to
> > disable the second level interrupts at suspend_noirq stage via the irq_mask
> > callbacks. The irq_mask callback disables the IRQs in hardware by
> > programming the corresponding GPIO pad registers. Only IRQs that are not
> > marked for wake are disabled.
> >
> > Signed-off-by: Rushikesh S Kadam <[email protected]>
>
> Reviewed-by: Andy Shevchenko <[email protected]>

Reviewed-and-tested-by: Rajneesh Bhardwaj <[email protected]>

>
> > ---
> > drivers/pinctrl/intel/pinctrl-intel.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
> > index 6dc1096..8f87215 100644
> > --- a/drivers/pinctrl/intel/pinctrl-intel.c
> > +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> > @@ -1035,6 +1035,7 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
> > .irq_unmask = intel_gpio_irq_unmask,
> > .irq_set_type = intel_gpio_irq_type,
> > .irq_set_wake = intel_gpio_irq_wake,
> > + .flags = IRQCHIP_MASK_ON_SUSPEND,
> > };
> >
> > static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
> > --
> > 1.9.1
> >
>
>
>
> --
> With Best Regards,
> Andy Shevchenko

--

2017-08-22 12:47:18

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH] pinctrl: intel: Disable GPIO pin interrupts in suspend

On Fri, Aug 11, 2017 at 10:23 AM, Rushikesh S Kadam
<[email protected]> wrote:

> The fix prevents unintended wakes from second level GPIO pin interrupts.
>
> On some Intel Kabylake platforms, it is observed that GPIO pin interrupts
> can wake the platform from suspend-to-idle, even though the IRQ is not
> configured as IRQF_NO_SUSPEND or enable_irq_wake().
>
> This can cause undesired wakes on Mobile devices such as Laptops and
> Chromebook devices. For example a headset jack insertion is not a desired
> wake source on Chromebook devices.
>
> The pinctrl-intel (GPIO controller) driver implements a "Shared IRQ" model.
> All GPIO pin interrupts are OR'ed and mapped to a first level IRQ14 (or
> IRQ15). The driver registers an irq_chip struct and maps an irq_domain for
> the GPIO pin interrupts. The IRQ14 handler demuxes and calls the second
> level IRQ for the respective pin.
>
> In the suspend entry flow, at suspend_noirq stage, the kernel disables IRQs
> that are not marked for wake. The pinctrl-intel driver does not implement a
> irq_disable() callback (to take advantage of lazy disabling). The
> pinctrl-intel GPIO interrupts are not disabled in hardware during suspend
> entry, and thus are able to wake the SoC out of suspend-to-idle.
>
> This patch sets the IRQCHIP_MASK_ON_SUSPEND flag for the GPIO irq_chip, to
> disable the second level interrupts at suspend_noirq stage via the irq_mask
> callbacks. The irq_mask callback disables the IRQs in hardware by
> programming the corresponding GPIO pad registers. Only IRQs that are not
> marked for wake are disabled.
>
> Signed-off-by: Rushikesh S Kadam <[email protected]>

Excellent work, patch applied with the collected ACKs.

Yours,
Linus Walleij