From: Chunyan Zhang <[email protected]>
This series adds Spreadtrum clock support together with its binding
documentation and devicetree data.
This patchset also added a few common clock mactos into drivers/clk/clk_common.h,
which are generally useful for all vendors' clock driver, sunxi-ng, zte, sprd
(added in this patchse) use them (or part of them) at present, once this patchset
is merged, I can help to remove the duplicated code which is under the vendors'
respective directories.
Thanks,
Chunyan
Changes from V5: (https://lkml.org/lkml/2017/11/20/21)
* Rebased the whole patch-set to 4.15-rc1;
* Fixed kbuild-test warnings;
* Switched to use devm_clk_hw_register() instead of clk_hw_register();
* Removed useless debug information from sc9860-clk.c.
Changes from V4: (https://lkml.org/lkml/2017/11/10/30)
* Added acked-by of Rob Herring;
* Removed spin lock from Spreadtrum's gate, mux, div drivers, since we have
switched to use regmap.
Changes from V3: (https://lkml.org/lkml/2017/11/2/61)
* Addressed comments from Julien Thierry:
- Clean the if branch of sprd_mux_helper_get_parent()
- Have the Gate clock macros and ops for both mode (i.e. sc_gate and gate) separate;
- Have the Mux clock macros with/without table separate, and same changes
for the composite clock.
* Switched the function name from _endisable to _toggle;
* Fixed Kbuild test error:
- Added exporting sprd_clk_regmap_init() which would be used in other module(s);
* Change the function sprd_clk_set_regmap() to the static one, and removed the
declear from the include file;
* Addressed comments from Rob:
- Separate the dt-binding include file from the driver patch;
- Documented more for the property "clocks"
* Changed the syscon device names;
* Changed the name of 'sprd_mux_internal' to 'sprd_mux_ssel'
Changes from V2: (http://lkml.iu.edu/hypermail/linux/kernel/1707.1/01504.html)
* Switch to use regmap to access registers;
* Splited all clocks into 16 separated nodes, for each belongs to a single address area;
* Rearranged the order of clock declaration in sc9860-clk.c, sorted them upon the address area;
* Added syscon device tree nodes which will be quoted by the node of clocks which are in
the same address area with the syscon device;
* Revised the binding documentation according to the dt modification.
Changes from V1: (https://lkml.org/lkml/2017/6/17/356)
* Address Stephen's comments:
- Switch to use platform device driver instead of the DT probing mechanism.
- Move the common clock macro out from vendor directory, but need to remove those
overlap code from other vendors (such as sunxi-ng) once this get merged.
- Add support to be built as a module.
- Add 'sprd_' prefix for all spin locks used in these drivers.
- Mark input parameter of sprd_x with const.
- Remove unreasonable dependencies to CONFIG_64BIT.
- Add readl() after writing the same register.
- Remove CLK_IS_BASIC which is no longer used.
- Remove unnecessery CLK_IGNORE_UNUSED when defining a clock.
- Change to expose all clock index.
- Use clk_ instead of ccu.
- Add Kconfig for sprd clocks.
- Move the fixed clocks out from the soc node.
- Switch to use 64-bit math in pll driver instead of 32-bit math.
* Revise binding documentation according to dt modification.
* Rename sc9860.c to sc9860-clk.c
Chunyan Zhang (12):
drivers: move clock common macros out from vendor directories
clk: sprd: Add common infrastructure
clk: sprd: add gate clock support
clk: sprd: add mux clock support
clk: sprd: add divider clock support
clk: sprd: add composite clock support
clk: sprd: add adjustable pll support
dt-bindings: Add Spreadtrum clock binding documentation
clk: sprd: Add dt-bindings include file for SC9860
clk: sprd: add clocks support for SC9860
arm64: dts: add syscon for whale2 platform
arm64: dts: add clocks for SC9860
Documentation/devicetree/bindings/clock/sprd.txt | 63 +
arch/arm64/boot/dts/sprd/sc9860.dtsi | 115 ++
arch/arm64/boot/dts/sprd/whale2.dtsi | 48 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/clk_common.h | 60 +
drivers/clk/sprd/Kconfig | 14 +
drivers/clk/sprd/Makefile | 11 +
drivers/clk/sprd/common.c | 99 ++
drivers/clk/sprd/common.h | 52 +
drivers/clk/sprd/composite.c | 62 +
drivers/clk/sprd/composite.h | 53 +
drivers/clk/sprd/div.c | 92 +
drivers/clk/sprd/div.h | 77 +
drivers/clk/sprd/gate.c | 113 ++
drivers/clk/sprd/gate.h | 61 +
drivers/clk/sprd/mux.c | 78 +
drivers/clk/sprd/mux.h | 76 +
drivers/clk/sprd/pll.c | 268 +++
drivers/clk/sprd/pll.h | 110 ++
drivers/clk/sprd/sc9860-clk.c | 1981 ++++++++++++++++++++++
include/dt-bindings/clock/sprd,sc9860-clk.h | 408 +++++
22 files changed, 3841 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
create mode 100644 drivers/clk/clk_common.h
create mode 100644 drivers/clk/sprd/Kconfig
create mode 100644 drivers/clk/sprd/Makefile
create mode 100644 drivers/clk/sprd/common.c
create mode 100644 drivers/clk/sprd/common.h
create mode 100644 drivers/clk/sprd/composite.c
create mode 100644 drivers/clk/sprd/composite.h
create mode 100644 drivers/clk/sprd/div.c
create mode 100644 drivers/clk/sprd/div.h
create mode 100644 drivers/clk/sprd/gate.c
create mode 100644 drivers/clk/sprd/gate.h
create mode 100644 drivers/clk/sprd/mux.c
create mode 100644 drivers/clk/sprd/mux.h
create mode 100644 drivers/clk/sprd/pll.c
create mode 100644 drivers/clk/sprd/pll.h
create mode 100644 drivers/clk/sprd/sc9860-clk.c
create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h
--
2.7.4
From 1583776749618167606@xxx Sat Nov 11 13:33:29 +0000 2017
X-GM-THRID: 1583392243183170079
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread
Some clocks on SC9860 are in the same address area with syscon devices,
those are what have a property of 'sprd,syscon' which would refer to
syscon devices, others would have a reg property indicated their address
ranges.
Signed-off-by: Chunyan Zhang <[email protected]>
---
arch/arm64/boot/dts/sprd/sc9860.dtsi | 115 +++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/sprd/whale2.dtsi | 2 +-
2 files changed, 116 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 7b7d8ce..bf03da4 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
#include "whale2.dtsi"
/ {
@@ -183,6 +184,120 @@
};
soc {
+ pmu_gate: pmu-gate {
+ compatible = "sprd,sc9860-pmu-gate";
+ sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+ clocks = <&ext_26m>;
+ #clock-cells = <1>;
+ };
+
+ pll: pll {
+ compatible = "sprd,sc9860-pll";
+ sprd,syscon = <&ana_regs>; /* 0x40400000 */
+ clocks = <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ ap_clk: clock-controller@20000000 {
+ compatible = "sprd,sc9860-ap-clk";
+ reg = <0 0x20000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>,
+ <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ aon_prediv: aon-prediv {
+ compatible = "sprd,sc9860-aon-prediv";
+ reg = <0 0x402d0000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>,
+ <&pmu_gate 0>;
+ #clock-cells = <1>;
+ };
+
+ apahb_gate: apahb-gate {
+ compatible = "sprd,sc9860-apahb-gate";
+ sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
+ clocks = <&aon_prediv 0>;
+ #clock-cells = <1>;
+ };
+
+ aon_gate: aon-gate {
+ compatible = "sprd,sc9860-aon-gate";
+ sprd,syscon = <&aon_regs>; /* 0x402e0000 */
+ clocks = <&aon_prediv 0>;
+ #clock-cells = <1>;
+ };
+
+ aonsecure_clk: clock-controller@40880000 {
+ compatible = "sprd,sc9860-aonsecure-clk";
+ reg = <0 0x40880000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ agcp_gate: agcp-gate {
+ compatible = "sprd,sc9860-agcp-gate";
+ sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
+ clocks = <&aon_prediv 0>;
+ #clock-cells = <1>;
+ };
+
+ gpu_clk: clock-controller@60200000 {
+ compatible = "sprd,sc9860-gpu-clk";
+ reg = <0 0x60200000 0 0x400>;
+ clocks = <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ vsp_clk: clock-controller@61000000 {
+ compatible = "sprd,sc9860-vsp-clk";
+ reg = <0 0x61000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ vsp_gate: vsp-gate {
+ compatible = "sprd,sc9860-vsp-gate";
+ sprd,syscon = <&vsp_regs>; /* 0x61100000 */
+ clocks = <&vsp_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ cam_clk: clock-controller@62000000 {
+ compatible = "sprd,sc9860-cam-clk";
+ reg = <0 0x62000000 0 0x4000>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ cam_gate: cam-gate {
+ compatible = "sprd,sc9860-cam-gate";
+ sprd,syscon = <&cam_regs>; /* 0x62100000 */
+ clocks = <&cam_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ disp_clk: clock-controller@63000000 {
+ compatible = "sprd,sc9860-disp-clk";
+ reg = <0 0x63000000 0 0x400>;
+ clocks = <&ext_26m>, <&pll 0>;
+ #clock-cells = <1>;
+ };
+
+ disp_gate: disp-gate {
+ compatible = "sprd,sc9860-disp-gate";
+ sprd,syscon = <&disp_regs>; /* 0x63100000 */
+ clocks = <&disp_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ apapb_gate: apapb-gate {
+ compatible = "sprd,sc9860-apapb-gate";
+ sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
+ clocks = <&ap_clk 0>;
+ #clock-cells = <1>;
+ };
+
funnel@10001000 { /* SoC Funnel */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x10001000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 6ea3a75..eb004bb 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -110,6 +110,6 @@
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
- clock-output-names = "ext_26m";
+ clock-output-names = "ext-26m";
};
};
--
2.7.4
From 1583309553176519554@xxx Mon Nov 06 09:47:35 +0000 2017
X-GM-THRID: 1583309553176519554
X-Gmail-Labels: Inbox,Category Promotions,HistoricalUnread