From: Ludovic Barre <[email protected]>
This patch series extends the existing STM32 microcontrollers (MCUs)
family to microprocessors (MPUs). The MPU platform (based on
Arm Cortex-A) is a continuation of the MCU one (based on Arm
Cortex-M) in that it shares a wide number of hardware blocks.
Ludovic Barre (6):
ARM: stm32: prepare stm32 family to welcome armv7 architecture
ARM: stm32: add initial support for STM32MP157
pinctrl: stm32: Add STM32MP157 MPU support
ARM: configs: multi_v7: add stm32 support
ARM: dts: stm32: add stm32mp157c initial support
ARM: dts: stm32: add initial support of stm32mp157c eval board
Documentation/arm/stm32/overview.txt | 21 +-
Documentation/arm/stm32/stm32mp157-overview.txt | 12 +
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
arch/arm/configs/multi_v7_defconfig | 2 +
arch/arm/mach-stm32/Kconfig | 48 +-
arch/arm/mach-stm32/Makefile | 3 +-
arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
arch/arm/mach-stm32/board-mpu-dt.c | 16 +
drivers/pinctrl/stm32/Kconfig | 6 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
17 files changed, 2656 insertions(+), 21 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch adds stm32 support to multi_v7_defconfig
Signed-off-by: Ludovic Barre <[email protected]>
---
arch/arm/configs/multi_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4..4b70ec7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -81,6 +81,7 @@ CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
+CONFIG_ARCH_STM32=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_RENESAS=y
@@ -346,6 +347,7 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_SERIAL_STM32=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
--
2.7.4
From: Ludovic Barre <[email protected]>
Add stm32mp157c initial support with:
-Dual Cortex-A7
-Arm psci, timer, gic
-Pinctrl
-Uart
Signed-off-by: Ludovic Barre <[email protected]>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 172 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++++++++++++++++++++++++
2 files changed, 311 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
new file mode 100644
index 0000000..440276a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOH";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOI";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOJ";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOK";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ status = "disabled";
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&clk_pll2_p>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
new file mode 100644
index 0000000..93dbcac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ aliases {
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
+ serial3 = &uart4;
+ };
+
+ intc: interrupt-controller@a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_pll_per: clk-pll-per {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+
+ clk_pclk1: clk-pclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <86000000>;
+ };
+
+ clk_pll3_p: clk-pll3_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <172000000>;
+ };
+
+ clk_pll2_p: clk-pll2_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <264000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+ };
+};
--
2.7.4
From: Ludovic Barre <[email protected]>
This driver consists of 2 controllers due to a hole in mapping:
-1 controller for GPIO bankA to K.
-1 controller for GPIO bankZ.
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Ludovic Barre <[email protected]>
---
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
drivers/pinctrl/stm32/Kconfig | 6 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
4 files changed, 2197 insertions(+)
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index 58c2a4c..2c46f30 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -12,6 +12,8 @@ Required properies:
"st,stm32f469-pinctrl"
"st,stm32f746-pinctrl"
"st,stm32h743-pinctrl"
+ "st,stm32mp157-pinctrl"
+ "st,stm32mp157-z-pinctrl"
- #address-cells: The value of this property must be 1
- #size-cells : The value of this property must be 1
- ranges : defines mapping between pin controller node (parent) to
diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
index 7e1fe39..a6d045d 100644
--- a/drivers/pinctrl/stm32/Kconfig
+++ b/drivers/pinctrl/stm32/Kconfig
@@ -32,4 +32,10 @@ config PINCTRL_STM32H743
depends on OF
default MACH_STM32H743
select PINCTRL_STM32
+
+config PINCTRL_STM32MP157
+ bool "STMicroelectronics STM32MP157 pin control" if COMPILE_TEST && !MACH_STM32MP157
+ depends on OF
+ default MACH_STM32MP157
+ select PINCTRL_STM32
endif
diff --git a/drivers/pinctrl/stm32/Makefile b/drivers/pinctrl/stm32/Makefile
index d13ca35..b52223d 100644
--- a/drivers/pinctrl/stm32/Makefile
+++ b/drivers/pinctrl/stm32/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_PINCTRL_STM32F429) += pinctrl-stm32f429.o
obj-$(CONFIG_PINCTRL_STM32F469) += pinctrl-stm32f469.o
obj-$(CONFIG_PINCTRL_STM32F746) += pinctrl-stm32f746.o
obj-$(CONFIG_PINCTRL_STM32H743) += pinctrl-stm32h743.o
+obj-$(CONFIG_PINCTRL_STM32MP157) += pinctrl-stm32mp157.o
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32mp157.c b/drivers/pinctrl/stm32/pinctrl-stm32mp157.c
new file mode 100644
index 0000000..7c7d628
--- /dev/null
+++ b/drivers/pinctrl/stm32/pinctrl-stm32mp157.c
@@ -0,0 +1,2188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue <[email protected]> for STMicroelectronics.
+ */
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-stm32.h"
+
+static const struct stm32_desc_pin stm32mp157_pins[] = {
+ STM32_PIN(
+ PINCTRL_PIN(0, "PA0"),
+ STM32_FUNCTION(0, "GPIOA0"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(3, "TIM5_CH1"),
+ STM32_FUNCTION(4, "TIM8_ETR"),
+ STM32_FUNCTION(5, "TIM15_BKIN"),
+ STM32_FUNCTION(8, "USART2_CTS_NSS USART_BOOT2_CTS_NSS"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "SDMMC2_CMD"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(12, "ETH_GMII_CRS ETH_MII_CRS"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(1, "PA1"),
+ STM32_FUNCTION(0, "GPIOA1"),
+ STM32_FUNCTION(1, "ETH_CLK"),
+ STM32_FUNCTION(2, "TIM2_CH2"),
+ STM32_FUNCTION(3, "TIM5_CH2"),
+ STM32_FUNCTION(4, "LPTIM3_OUT"),
+ STM32_FUNCTION(5, "TIM15_CH1N"),
+ STM32_FUNCTION(8, "USART2_RTS USART_BOOT2_RTS"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO3 QUADSPI_BOOTBK1_IO3"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_CLK ETH_MII_RX_CLK ETH_RGMII_RX_CLK ETH_RMII_REF_CLK"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(2, "PA2"),
+ STM32_FUNCTION(0, "GPIOA2"),
+ STM32_FUNCTION(2, "TIM2_CH3"),
+ STM32_FUNCTION(3, "TIM5_CH3"),
+ STM32_FUNCTION(4, "LPTIM4_OUT"),
+ STM32_FUNCTION(5, "TIM15_CH1"),
+ STM32_FUNCTION(8, "USART2_TX USART_BOOT2_TX"),
+ STM32_FUNCTION(9, "SAI2_SCK_B"),
+ STM32_FUNCTION(11, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(12, "ETH_MDIO"),
+ STM32_FUNCTION(13, "MDIOS_MDIO"),
+ STM32_FUNCTION(15, "LCD_R1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(3, "PA3"),
+ STM32_FUNCTION(0, "GPIOA3"),
+ STM32_FUNCTION(2, "TIM2_CH4"),
+ STM32_FUNCTION(3, "TIM5_CH4"),
+ STM32_FUNCTION(4, "LPTIM5_OUT"),
+ STM32_FUNCTION(5, "TIM15_CH2"),
+ STM32_FUNCTION(8, "USART2_RX USART_BOOT2_RX"),
+ STM32_FUNCTION(10, "LCD_B2"),
+ STM32_FUNCTION(12, "ETH_GMII_COL ETH_MII_COL"),
+ STM32_FUNCTION(15, "LCD_B5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(4, "PA4"),
+ STM32_FUNCTION(0, "GPIOA4"),
+ STM32_FUNCTION(1, "HDP0"),
+ STM32_FUNCTION(3, "TIM5_ETR"),
+ STM32_FUNCTION(5, "SAI4_D2"),
+ STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"),
+ STM32_FUNCTION(7, "SPI3_NSS I2S3_WS"),
+ STM32_FUNCTION(8, "USART2_CK USART_BOOT2_CK"),
+ STM32_FUNCTION(9, "SPI6_NSS"),
+ STM32_FUNCTION(13, "SAI4_FS_A"),
+ STM32_FUNCTION(14, "DCMI_HSYNC"),
+ STM32_FUNCTION(15, "LCD_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(5, "PA5"),
+ STM32_FUNCTION(0, "GPIOA5"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(5, "SAI4_CK1"),
+ STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"),
+ STM32_FUNCTION(9, "SPI6_SCK"),
+ STM32_FUNCTION(13, "SAI4_MCLK_A"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(6, "PA6"),
+ STM32_FUNCTION(0, "GPIOA6"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(3, "TIM3_CH1"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(5, "SAI4_CK2"),
+ STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
+ STM32_FUNCTION(9, "SPI6_MISO"),
+ STM32_FUNCTION(10, "TIM13_CH1"),
+ STM32_FUNCTION(12, "MDIOS_MDC"),
+ STM32_FUNCTION(13, "SAI4_SCK_A"),
+ STM32_FUNCTION(14, "DCMI_PIXCLK"),
+ STM32_FUNCTION(15, "LCD_G2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(7, "PA7"),
+ STM32_FUNCTION(0, "GPIOA7"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(3, "TIM3_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(5, "SAI4_D1"),
+ STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"),
+ STM32_FUNCTION(9, "SPI6_MOSI"),
+ STM32_FUNCTION(10, "TIM14_CH1"),
+ STM32_FUNCTION(11, "QUADSPI_CLK"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_DV ETH_MII_RX_DV ETH_RGMII_RX_CTL ETH_RMII_CRS_DV"),
+ STM32_FUNCTION(13, "SAI4_SD_A"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(8, "PA8"),
+ STM32_FUNCTION(0, "GPIOA8"),
+ STM32_FUNCTION(1, "MCO1"),
+ STM32_FUNCTION(2, "TIM1_CH1"),
+ STM32_FUNCTION(4, "TIM8_BKIN2"),
+ STM32_FUNCTION(5, "I2C3_SCL"),
+ STM32_FUNCTION(6, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(8, "USART1_CK"),
+ STM32_FUNCTION(9, "SDMMC2_CKIN SDMMC_BOOT2_CKIN"),
+ STM32_FUNCTION(10, "SDMMC2_D4 SDMMC_BOOT2_D4"),
+ STM32_FUNCTION(11, "USBO_SOF"),
+ STM32_FUNCTION(13, "SAI4_SD_B"),
+ STM32_FUNCTION(14, "UART7_RX"),
+ STM32_FUNCTION(15, "LCD_R6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(9, "PA9"),
+ STM32_FUNCTION(0, "GPIOA9"),
+ STM32_FUNCTION(2, "TIM1_CH2"),
+ STM32_FUNCTION(5, "I2C3_SMBA"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(9, "SDMMC2_CDIR SDMMC_BOOT2_CDIR"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(11, "SDMMC2_D5 SDMMC_BOOT2_D5"),
+ STM32_FUNCTION(14, "DCMI_D0"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(10, "PA10"),
+ STM32_FUNCTION(0, "GPIOA10"),
+ STM32_FUNCTION(2, "TIM1_CH3"),
+ STM32_FUNCTION(6, "SPI3_NSS I2S3_WS"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(12, "MDIOS_MDIO"),
+ STM32_FUNCTION(13, "SAI4_FS_B"),
+ STM32_FUNCTION(14, "DCMI_D1"),
+ STM32_FUNCTION(15, "LCD_B1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(11, "PA11"),
+ STM32_FUNCTION(0, "GPIOA11"),
+ STM32_FUNCTION(2, "TIM1_CH4"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(5, "I2C5_SCL"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(7, "UART4_RX"),
+ STM32_FUNCTION(8, "USART1_CTS_NSS"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(12, "PA12"),
+ STM32_FUNCTION(0, "GPIOA12"),
+ STM32_FUNCTION(2, "TIM1_ETR"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "UART4_TX"),
+ STM32_FUNCTION(8, "USART1_RTS"),
+ STM32_FUNCTION(9, "SAI2_FS_B"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(13, "PA13"),
+ STM32_FUNCTION(0, "GPIOA13"),
+ STM32_FUNCTION(1, "DBTRGO"),
+ STM32_FUNCTION(2, "DBTRGI"),
+ STM32_FUNCTION(3, "MCO1"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(14, "PA14"),
+ STM32_FUNCTION(0, "GPIOA14"),
+ STM32_FUNCTION(1, "DBTRGO"),
+ STM32_FUNCTION(2, "DBTRGI"),
+ STM32_FUNCTION(3, "MCO2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(15, "PA15"),
+ STM32_FUNCTION(0, "GPIOA15"),
+ STM32_FUNCTION(1, "DBTRGI"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(3, "SAI4_D2"),
+ STM32_FUNCTION(4, "SDMMC1_CDIR"),
+ STM32_FUNCTION(5, "HDMI_CEC"),
+ STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"),
+ STM32_FUNCTION(7, "SPI3_NSS I2S3_WS"),
+ STM32_FUNCTION(8, "SPI6_NSS"),
+ STM32_FUNCTION(9, "UART4_RTS UART_BOOT4_RTS"),
+ STM32_FUNCTION(10, "SDMMC2_D5 SDMMC_BOOT2_D5"),
+ STM32_FUNCTION(11, "SDMMC2_CDIR SDMMC_BOOT2_CDIR"),
+ STM32_FUNCTION(12, "SDMMC1_D5 SDMMC_BOOT1_D5"),
+ STM32_FUNCTION(13, "SAI4_FS_A"),
+ STM32_FUNCTION(14, "UART7_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(16, "PB0"),
+ STM32_FUNCTION(0, "GPIOB0"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(3, "TIM3_CH3"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(7, "DFSDM_CKOUT"),
+ STM32_FUNCTION(9, "UART4_CTS UART_BOOT4_CTS"),
+ STM32_FUNCTION(10, "LCD_R3"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD2 ETH_MII_RXD2 ETH_RGMII_RXD2"),
+ STM32_FUNCTION(13, "MDIOS_MDIO"),
+ STM32_FUNCTION(15, "LCD_G1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(17, "PB1"),
+ STM32_FUNCTION(0, "GPIOB1"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(3, "TIM3_CH4"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(7, "DFSDM_DATA1"),
+ STM32_FUNCTION(10, "LCD_R6"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD3 ETH_MII_RXD3 ETH_RGMII_RXD3"),
+ STM32_FUNCTION(13, "MDIOS_MDC"),
+ STM32_FUNCTION(15, "LCD_G0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(18, "PB2"),
+ STM32_FUNCTION(0, "GPIOB2"),
+ STM32_FUNCTION(1, "TRACED4"),
+ STM32_FUNCTION(2, "RTC_OUT2"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(4, "DFSDM_CK1"),
+ STM32_FUNCTION(5, "USART1_RX"),
+ STM32_FUNCTION(6, "I2S_CKIN"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(8, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(9, "UART4_RX UART_BOOT4_RX"),
+ STM32_FUNCTION(10, "QUADSPI_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(19, "PB3"),
+ STM32_FUNCTION(0, "GPIOB3"),
+ STM32_FUNCTION(1, "TRACED9"),
+ STM32_FUNCTION(2, "TIM2_CH2"),
+ STM32_FUNCTION(5, "SAI4_CK1"),
+ STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"),
+ STM32_FUNCTION(7, "SPI3_SCK I2S3_CK"),
+ STM32_FUNCTION(9, "SPI6_SCK"),
+ STM32_FUNCTION(10, "SDMMC2_D2 SDMMC_BOOT2_D2"),
+ STM32_FUNCTION(13, "SAI4_MCLK_A"),
+ STM32_FUNCTION(14, "UART7_RX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(20, "PB4"),
+ STM32_FUNCTION(0, "GPIOB4"),
+ STM32_FUNCTION(1, "TRACED8"),
+ STM32_FUNCTION(2, "TIM16_BKIN"),
+ STM32_FUNCTION(3, "TIM3_CH1"),
+ STM32_FUNCTION(5, "SAI4_CK2"),
+ STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
+ STM32_FUNCTION(7, "SPI3_MISO I2S3_SDI"),
+ STM32_FUNCTION(8, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(9, "SPI6_MISO"),
+ STM32_FUNCTION(10, "SDMMC2_D3 SDMMC_BOOT2_D3"),
+ STM32_FUNCTION(13, "SAI4_SCK_A"),
+ STM32_FUNCTION(14, "UART7_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(21, "PB5"),
+ STM32_FUNCTION(0, "GPIOB5"),
+ STM32_FUNCTION(1, "ETH_CLK"),
+ STM32_FUNCTION(2, "TIM17_BKIN"),
+ STM32_FUNCTION(3, "TIM3_CH2"),
+ STM32_FUNCTION(4, "SAI4_D1"),
+ STM32_FUNCTION(5, "I2C1_SMBA"),
+ STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"),
+ STM32_FUNCTION(7, "I2C4_SMBA"),
+ STM32_FUNCTION(8, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(9, "SPI6_MOSI"),
+ STM32_FUNCTION(10, "CAN2_RX"),
+ STM32_FUNCTION(11, "SAI4_SD_A"),
+ STM32_FUNCTION(12, "ETH_PPS_OUT"),
+ STM32_FUNCTION(13, "UART5_RX UART_BOOT5_RX"),
+ STM32_FUNCTION(14, "DCMI_D10"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(22, "PB6"),
+ STM32_FUNCTION(0, "GPIOB6"),
+ STM32_FUNCTION(2, "TIM16_CH1N"),
+ STM32_FUNCTION(3, "TIM4_CH1"),
+ STM32_FUNCTION(5, "I2C1_SCL"),
+ STM32_FUNCTION(6, "HDMI_CEC"),
+ STM32_FUNCTION(7, "I2C4_SCL"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(10, "CAN2_TX"),
+ STM32_FUNCTION(11, "QUADSPI_BK1_NCS QUADSPI_BOOTBK1_NCS"),
+ STM32_FUNCTION(12, "DFSDM_DATA5"),
+ STM32_FUNCTION(13, "UART5_TX"),
+ STM32_FUNCTION(14, "DCMI_D5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(23, "PB7"),
+ STM32_FUNCTION(0, "GPIOB7"),
+ STM32_FUNCTION(2, "TIM17_CH1N"),
+ STM32_FUNCTION(3, "TIM4_CH2"),
+ STM32_FUNCTION(5, "I2C1_SDA"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(10, "CAN2_TXFD"),
+ STM32_FUNCTION(11, "SDMMC2_D1 SDMMC_BOOT2_D1"),
+ STM32_FUNCTION(12, "DFSDM_CK5"),
+ STM32_FUNCTION(13, "FMC_NL"),
+ STM32_FUNCTION(14, "DCMI_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(24, "PB8"),
+ STM32_FUNCTION(0, "GPIOB8"),
+ STM32_FUNCTION(1, "HDP6"),
+ STM32_FUNCTION(2, "TIM16_CH1"),
+ STM32_FUNCTION(3, "TIM4_CH3"),
+ STM32_FUNCTION(4, "DFSDM_CK7"),
+ STM32_FUNCTION(5, "I2C1_SCL"),
+ STM32_FUNCTION(6, "SDMMC1_CKIN SDMMC_BOOT1_CKIN"),
+ STM32_FUNCTION(7, "I2C4_SCL"),
+ STM32_FUNCTION(8, "SDMMC2_CKIN SDMMC_BOOT2_CKIN"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(11, "SDMMC2_D4 SDMMC_BOOT2_D4"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD3 ETH_MII_TXD3 ETH_RGMII_TXD3"),
+ STM32_FUNCTION(13, "SDMMC1_D4 SDMMC_BOOT1_D4"),
+ STM32_FUNCTION(14, "DCMI_D6"),
+ STM32_FUNCTION(15, "LCD_B6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(25, "PB9"),
+ STM32_FUNCTION(0, "GPIOB9"),
+ STM32_FUNCTION(1, "HDP7"),
+ STM32_FUNCTION(2, "TIM17_CH1"),
+ STM32_FUNCTION(3, "TIM4_CH4"),
+ STM32_FUNCTION(4, "DFSDM_DATA7"),
+ STM32_FUNCTION(5, "I2C1_SDA"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "SDMMC2_CDIR SDMMC_BOOT2_CDIR"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(11, "SDMMC2_D5 SDMMC_BOOT2_D5"),
+ STM32_FUNCTION(12, "SDMMC1_CDIR SDMMC_BOOT1_CDIR"),
+ STM32_FUNCTION(13, "SDMMC1_D5 SDMMC_BOOT1_D5"),
+ STM32_FUNCTION(14, "DCMI_D7"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(26, "PB10"),
+ STM32_FUNCTION(0, "GPIOB10"),
+ STM32_FUNCTION(2, "TIM2_CH3"),
+ STM32_FUNCTION(4, "LPTIM2_IN1"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "DFSDM_DATA7"),
+ STM32_FUNCTION(8, "USART3_TX USART_BOOT3_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_NCS"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_ER ETH_MII_RX_ER"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(27, "PB11"),
+ STM32_FUNCTION(0, "GPIOB11"),
+ STM32_FUNCTION(2, "TIM2_CH4"),
+ STM32_FUNCTION(4, "LPTIM2_ETR"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(7, "DFSDM_CK7"),
+ STM32_FUNCTION(8, "USART3_RX"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_EN ETH_MII_TX_EN ETH_RGMII_TX_CTL ETH_RMII_TX_EN"),
+ STM32_FUNCTION(14, "DSI_TE"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(28, "PB12"),
+ STM32_FUNCTION(0, "GPIOB12"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(3, "I2C6_SMBA"),
+ STM32_FUNCTION(5, "I2C2_SMBA"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(7, "DFSDM_DATA1"),
+ STM32_FUNCTION(8, "USART3_CK USART_BOOT3_CK"),
+ STM32_FUNCTION(9, "USART3_RX USART_BOOT3_RX"),
+ STM32_FUNCTION(10, "CAN2_RX"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD0 ETH_MII_TXD0 ETH_RGMII_TXD0 ETH_RMII_TXD0"),
+ STM32_FUNCTION(15, "UART5_RX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(29, "PB13"),
+ STM32_FUNCTION(0, "GPIOB13"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(5, "LPTIM2_OUT"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "DFSDM_CK1"),
+ STM32_FUNCTION(8, "USART3_CTS_NSS USART_BOOT3_CTS_NSS"),
+ STM32_FUNCTION(10, "CAN2_TX"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD1 ETH_MII_TXD1 ETH_RGMII_TXD1 ETH_RMII_TXD1"),
+ STM32_FUNCTION(15, "UART5_TX UART_BOOT5_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(30, "PB14"),
+ STM32_FUNCTION(0, "GPIOB14"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(3, "TIM12_CH1"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(5, "USART1_TX"),
+ STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"),
+ STM32_FUNCTION(7, "DFSDM_DATA2"),
+ STM32_FUNCTION(8, "USART3_RTS USART_BOOT3_RTS"),
+ STM32_FUNCTION(10, "SDMMC2_D0 SDMMC_BOOT2_D0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(31, "PB15"),
+ STM32_FUNCTION(0, "GPIOB15"),
+ STM32_FUNCTION(1, "RTC_REFIN"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(3, "TIM12_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(5, "USART1_RX"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(7, "DFSDM_CK2"),
+ STM32_FUNCTION(10, "SDMMC2_D1 SDMMC_BOOT2_D1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(32, "PC0"),
+ STM32_FUNCTION(0, "GPIOC0"),
+ STM32_FUNCTION(4, "DFSDM_CK0"),
+ STM32_FUNCTION(5, "LPTIM2_IN2"),
+ STM32_FUNCTION(7, "DFSDM_DATA4"),
+ STM32_FUNCTION(9, "SAI2_FS_B"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_NCS QUADSPI_BOOTBK2_NCS"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(33, "PC1"),
+ STM32_FUNCTION(0, "GPIOC1"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(4, "DFSDM_DATA0"),
+ STM32_FUNCTION(5, "DFSDM_CK4"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(10, "SDMMC2_CK"),
+ STM32_FUNCTION(12, "ETH_MDC"),
+ STM32_FUNCTION(13, "MDIOS_MDC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(34, "PC2"),
+ STM32_FUNCTION(0, "GPIOC2"),
+ STM32_FUNCTION(4, "DFSDM_CK1"),
+ STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"),
+ STM32_FUNCTION(7, "DFSDM_CKOUT"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD2 ETH_MII_TXD2 ETH_RGMII_TXD2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(35, "PC3"),
+ STM32_FUNCTION(0, "GPIOC3"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(4, "DFSDM_DATA1"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_CLK ETH_MII_TX_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(36, "PC4"),
+ STM32_FUNCTION(0, "GPIOC4"),
+ STM32_FUNCTION(4, "DFSDM_CK2"),
+ STM32_FUNCTION(6, "I2S1_MCK"),
+ STM32_FUNCTION(10, "SPDIF_IN2"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD0 ETH_MII_RXD0 ETH_RGMII_RXD0 ETH_RMII_RXD0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(37, "PC5"),
+ STM32_FUNCTION(0, "GPIOC5"),
+ STM32_FUNCTION(3, "SAI1_D3"),
+ STM32_FUNCTION(4, "DFSDM_DATA2"),
+ STM32_FUNCTION(5, "SAI4_D4"),
+ STM32_FUNCTION(7, "SAI1_D4"),
+ STM32_FUNCTION(10, "SPDIF_IN3"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD1 ETH_MII_RXD1 ETH_RGMII_RXD1 ETH_RMII_RXD1"),
+ STM32_FUNCTION(13, "SAI4_D3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(38, "PC6"),
+ STM32_FUNCTION(0, "GPIOC6"),
+ STM32_FUNCTION(1, "HDP1"),
+ STM32_FUNCTION(3, "TIM3_CH1"),
+ STM32_FUNCTION(4, "TIM8_CH1"),
+ STM32_FUNCTION(5, "DFSDM_CK3"),
+ STM32_FUNCTION(6, "I2S2_MCK"),
+ STM32_FUNCTION(8, "USART6_TX USART_BOOT6_TX"),
+ STM32_FUNCTION(9, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(11, "SDMMC2_D6 SDMMC_BOOT2_D6"),
+ STM32_FUNCTION(12, "DSI_TE"),
+ STM32_FUNCTION(13, "SDMMC1_D6 SDMMC_BOOT1_D6"),
+ STM32_FUNCTION(14, "DCMI_D0"),
+ STM32_FUNCTION(15, "LCD_HSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(39, "PC7"),
+ STM32_FUNCTION(0, "GPIOC7"),
+ STM32_FUNCTION(1, "HDP4"),
+ STM32_FUNCTION(3, "TIM3_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(5, "DFSDM_DATA3"),
+ STM32_FUNCTION(7, "I2S3_MCK"),
+ STM32_FUNCTION(8, "USART6_RX USART_BOOT6_RX"),
+ STM32_FUNCTION(9, "SDMMC1_D123DIR SDMMC_BOOT1_D123DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D123DIR SDMMC_BOOT2_D123DIR"),
+ STM32_FUNCTION(11, "SDMMC2_D7 SDMMC_BOOT2_D7"),
+ STM32_FUNCTION(13, "SDMMC1_D7 SDMMC_BOOT1_D7"),
+ STM32_FUNCTION(14, "DCMI_D1"),
+ STM32_FUNCTION(15, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(40, "PC8"),
+ STM32_FUNCTION(0, "GPIOC8"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(3, "TIM3_CH3"),
+ STM32_FUNCTION(4, "TIM8_CH3"),
+ STM32_FUNCTION(7, "UART4_TX"),
+ STM32_FUNCTION(8, "USART6_CK USART_BOOT6_CK"),
+ STM32_FUNCTION(9, "UART5_RTS UART_BOOT5_RTS"),
+ STM32_FUNCTION(13, "SDMMC1_D0 SDMMC_BOOT1_D0"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(41, "PC9"),
+ STM32_FUNCTION(0, "GPIOC9"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(3, "TIM3_CH4"),
+ STM32_FUNCTION(4, "TIM8_CH4"),
+ STM32_FUNCTION(5, "I2C3_SDA"),
+ STM32_FUNCTION(6, "I2S_CKIN"),
+ STM32_FUNCTION(9, "UART5_CTS UART_BOOT5_CTS"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO0"),
+ STM32_FUNCTION(13, "SDMMC1_D1 SDMMC_BOOT1_D1"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(42, "PC10"),
+ STM32_FUNCTION(0, "GPIOC10"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(4, "DFSDM_CK5"),
+ STM32_FUNCTION(7, "SPI3_SCK I2S3_CK"),
+ STM32_FUNCTION(8, "USART3_TX"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO1"),
+ STM32_FUNCTION(11, "SAI4_MCLK_B"),
+ STM32_FUNCTION(13, "SDMMC1_D2 SDMMC_BOOT1_D2"),
+ STM32_FUNCTION(14, "DCMI_D8"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(43, "PC11"),
+ STM32_FUNCTION(0, "GPIOC11"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(4, "DFSDM_DATA5"),
+ STM32_FUNCTION(7, "SPI3_MISO I2S3_SDI"),
+ STM32_FUNCTION(8, "USART3_RX"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_NCS QUADSPI_BOOTBK2_NCS"),
+ STM32_FUNCTION(11, "SAI4_SCK_B"),
+ STM32_FUNCTION(13, "SDMMC1_D3 SDMMC_BOOT1_D3"),
+ STM32_FUNCTION(14, "DCMI_D4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(44, "PC12"),
+ STM32_FUNCTION(0, "GPIOC12"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(2, "MCO2"),
+ STM32_FUNCTION(3, "SAI4_D3"),
+ STM32_FUNCTION(7, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(8, "USART3_CK USART_BOOT3_CK"),
+ STM32_FUNCTION(9, "UART5_TX"),
+ STM32_FUNCTION(11, "SAI4_SD_B"),
+ STM32_FUNCTION(13, "SDMMC1_CK SDMMC_BOOT1_CK"),
+ STM32_FUNCTION(14, "DCMI_D9"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(45, "PC13"),
+ STM32_FUNCTION(0, "GPIOC13"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(46, "PC14"),
+ STM32_FUNCTION(0, "GPIOC14"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(47, "PC15"),
+ STM32_FUNCTION(0, "GPIOC15"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(48, "PD0"),
+ STM32_FUNCTION(0, "GPIOD0"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "DFSDM_CK6"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(7, "SAI3_SCK_A"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(11, "SDMMC3_CMD"),
+ STM32_FUNCTION(12, "DFSDM_DATA7"),
+ STM32_FUNCTION(13, "FMC_D2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(49, "PD1"),
+ STM32_FUNCTION(0, "GPIOD1"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "DFSDM_DATA6"),
+ STM32_FUNCTION(5, "I2C5_SCL"),
+ STM32_FUNCTION(7, "SAI3_SD_A"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(11, "SDMMC3_D0"),
+ STM32_FUNCTION(12, "DFSDM_CK7"),
+ STM32_FUNCTION(13, "FMC_D3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(50, "PD2"),
+ STM32_FUNCTION(0, "GPIOD2"),
+ STM32_FUNCTION(3, "TIM3_ETR"),
+ STM32_FUNCTION(5, "I2C5_SMBA"),
+ STM32_FUNCTION(7, "UART4_RX"),
+ STM32_FUNCTION(9, "UART5_RX"),
+ STM32_FUNCTION(13, "SDMMC1_CMD SDMMC_BOOT1_CMD"),
+ STM32_FUNCTION(14, "DCMI_D11"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(51, "PD3"),
+ STM32_FUNCTION(0, "GPIOD3"),
+ STM32_FUNCTION(1, "HDP5"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "DFSDM_DATA0"),
+ STM32_FUNCTION(8, "USART2_CTS_NSS USART_BOOT2_CTS_NSS"),
+ STM32_FUNCTION(9, "SDMMC1_D123DIR SDMMC_BOOT1_D123DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D7 SDMMC_BOOT2_D7"),
+ STM32_FUNCTION(11, "SDMMC2_D123DIR SDMMC_BOOT2_D123DIR"),
+ STM32_FUNCTION(12, "SDMMC1_D7 SDMMC_BOOT1_D7"),
+ STM32_FUNCTION(13, "FMC_CLK"),
+ STM32_FUNCTION(14, "DCMI_D5"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(52, "PD4"),
+ STM32_FUNCTION(0, "GPIOD4"),
+ STM32_FUNCTION(7, "SAI3_FS_A"),
+ STM32_FUNCTION(8, "USART2_RTS USART_BOOT2_RTS"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(11, "SDMMC3_D1"),
+ STM32_FUNCTION(12, "DFSDM_CK0"),
+ STM32_FUNCTION(13, "FMC_NOE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(53, "PD5"),
+ STM32_FUNCTION(0, "GPIOD5"),
+ STM32_FUNCTION(8, "USART2_TX"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(11, "SDMMC3_D2"),
+ STM32_FUNCTION(13, "FMC_NWE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(54, "PD6"),
+ STM32_FUNCTION(0, "GPIOD6"),
+ STM32_FUNCTION(2, "TIM16_CH1N"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(4, "DFSDM_CK4"),
+ STM32_FUNCTION(5, "DFSDM_DATA1"),
+ STM32_FUNCTION(6, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(8, "USART2_RX"),
+ STM32_FUNCTION(10, "CAN2_RXFD"),
+ STM32_FUNCTION(11, "FMC_INT"),
+ STM32_FUNCTION(13, "FMC_NWAIT"),
+ STM32_FUNCTION(14, "DCMI_D10"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(55, "PD7"),
+ STM32_FUNCTION(0, "GPIOD7"),
+ STM32_FUNCTION(1, "TRACED6"),
+ STM32_FUNCTION(4, "DFSDM_DATA4"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(7, "DFSDM_CK1"),
+ STM32_FUNCTION(8, "USART2_CK USART_BOOT2_CK"),
+ STM32_FUNCTION(10, "SPDIF_IN0"),
+ STM32_FUNCTION(11, "SDMMC3_D3"),
+ STM32_FUNCTION(13, "FMC_NE1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(56, "PD8"),
+ STM32_FUNCTION(0, "GPIOD8"),
+ STM32_FUNCTION(4, "DFSDM_CK3"),
+ STM32_FUNCTION(7, "SAI3_SCK_B"),
+ STM32_FUNCTION(8, "USART3_TX"),
+ STM32_FUNCTION(10, "SPDIF_IN1"),
+ STM32_FUNCTION(13, "FMC_D13"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(57, "PD9"),
+ STM32_FUNCTION(0, "GPIOD9"),
+ STM32_FUNCTION(4, "DFSDM_DATA3"),
+ STM32_FUNCTION(7, "SAI3_SD_B"),
+ STM32_FUNCTION(8, "USART3_RX"),
+ STM32_FUNCTION(10, "CAN2_RXFD"),
+ STM32_FUNCTION(13, "FMC_D14"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(58, "PD10"),
+ STM32_FUNCTION(0, "GPIOD10"),
+ STM32_FUNCTION(1, "RTC_REFIN"),
+ STM32_FUNCTION(2, "TIM16_BKIN"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(5, "I2C5_SMBA"),
+ STM32_FUNCTION(6, "SPI3_MISO I2S3_SDI"),
+ STM32_FUNCTION(7, "SAI3_FS_B"),
+ STM32_FUNCTION(8, "USART3_CK USART_BOOT3_CK"),
+ STM32_FUNCTION(10, "CAN2_TXFD"),
+ STM32_FUNCTION(13, "FMC_D15"),
+ STM32_FUNCTION(15, "LCD_B3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(59, "PD11"),
+ STM32_FUNCTION(0, "GPIOD11"),
+ STM32_FUNCTION(4, "LPTIM2_IN2"),
+ STM32_FUNCTION(5, "I2C4_SMBA"),
+ STM32_FUNCTION(6, "I2C1_SMBA"),
+ STM32_FUNCTION(8, "USART3_CTS_NSS USART_BOOT3_CTS_NSS"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO0"),
+ STM32_FUNCTION(11, "SAI2_SD_A"),
+ STM32_FUNCTION(13, "FMC_A16 FMC_CLE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(60, "PD12"),
+ STM32_FUNCTION(0, "GPIOD12"),
+ STM32_FUNCTION(2, "LPTIM1_IN1"),
+ STM32_FUNCTION(3, "TIM4_CH1"),
+ STM32_FUNCTION(4, "LPTIM2_IN1"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "I2C1_SCL"),
+ STM32_FUNCTION(8, "USART3_RTS USART_BOOT3_RTS"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO1"),
+ STM32_FUNCTION(11, "SAI2_FS_A"),
+ STM32_FUNCTION(13, "FMC_A17 FMC_ALE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(61, "PD13"),
+ STM32_FUNCTION(0, "GPIOD13"),
+ STM32_FUNCTION(2, "LPTIM1_OUT"),
+ STM32_FUNCTION(3, "TIM4_CH2"),
+ STM32_FUNCTION(5, "I2C4_SDA"),
+ STM32_FUNCTION(6, "I2C1_SDA"),
+ STM32_FUNCTION(7, "I2S3_MCK"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO3 QUADSPI_BOOTBK1_IO3"),
+ STM32_FUNCTION(11, "SAI2_SCK_A"),
+ STM32_FUNCTION(13, "FMC_A18"),
+ STM32_FUNCTION(14, "DSI_TE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(62, "PD14"),
+ STM32_FUNCTION(0, "GPIOD14"),
+ STM32_FUNCTION(3, "TIM4_CH3"),
+ STM32_FUNCTION(7, "SAI3_MCLK_B"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(13, "FMC_D0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(63, "PD15"),
+ STM32_FUNCTION(0, "GPIOD15"),
+ STM32_FUNCTION(3, "TIM4_CH4"),
+ STM32_FUNCTION(7, "SAI3_MCLK_A"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(13, "FMC_D1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(64, "PE0"),
+ STM32_FUNCTION(0, "GPIOE0"),
+ STM32_FUNCTION(2, "LPTIM1_ETR"),
+ STM32_FUNCTION(3, "TIM4_ETR"),
+ STM32_FUNCTION(5, "LPTIM2_ETR"),
+ STM32_FUNCTION(6, "SPI3_SCK I2S3_CK"),
+ STM32_FUNCTION(7, "SAI4_MCLK_B"),
+ STM32_FUNCTION(9, "UART8_RX UART_BOOT8_RX"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(11, "SAI2_MCLK_A"),
+ STM32_FUNCTION(13, "FMC_NBL0"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(65, "PE1"),
+ STM32_FUNCTION(0, "GPIOE1"),
+ STM32_FUNCTION(2, "LPTIM1_IN2"),
+ STM32_FUNCTION(6, "I2S2_MCK"),
+ STM32_FUNCTION(7, "SAI3_SD_B"),
+ STM32_FUNCTION(9, "UART8_TX UART_BOOT8_TX"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(13, "FMC_NBL1"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(66, "PE2"),
+ STM32_FUNCTION(0, "GPIOE2"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(3, "SAI1_CK1"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "SPI4_SCK"),
+ STM32_FUNCTION(7, "SAI1_MCLK_A"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO2 QUADSPI_BOOTBK1_IO2"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD3 ETH_MII_TXD3 ETH_RGMII_TXD3"),
+ STM32_FUNCTION(13, "FMC_A23"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(67, "PE3"),
+ STM32_FUNCTION(0, "GPIOE3"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(5, "TIM15_BKIN"),
+ STM32_FUNCTION(7, "SAI1_SD_B"),
+ STM32_FUNCTION(10, "SDMMC2_CK SDMMC_BOOT2_CK"),
+ STM32_FUNCTION(13, "FMC_A19"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(68, "PE4"),
+ STM32_FUNCTION(0, "GPIOE4"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(3, "SAI1_D2"),
+ STM32_FUNCTION(4, "DFSDM_DATA3"),
+ STM32_FUNCTION(5, "TIM15_CH1N"),
+ STM32_FUNCTION(6, "SPI4_NSS"),
+ STM32_FUNCTION(7, "SAI1_FS_A"),
+ STM32_FUNCTION(8, "SDMMC2_CKIN SDMMC_BOOT2_CKIN"),
+ STM32_FUNCTION(9, "SDMMC1_CKIN SDMMC_BOOT1_CKIN"),
+ STM32_FUNCTION(10, "SDMMC2_D4 SDMMC_BOOT2_D4"),
+ STM32_FUNCTION(12, "SDMMC1_D4 SDMMC_BOOT1_D4"),
+ STM32_FUNCTION(13, "FMC_A20"),
+ STM32_FUNCTION(14, "DCMI_D4"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(69, "PE5"),
+ STM32_FUNCTION(0, "GPIOE5"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(3, "SAI1_CK2"),
+ STM32_FUNCTION(4, "DFSDM_CK3"),
+ STM32_FUNCTION(5, "TIM15_CH1"),
+ STM32_FUNCTION(6, "SPI4_MISO"),
+ STM32_FUNCTION(7, "SAI1_SCK_A"),
+ STM32_FUNCTION(8, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(9, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D6 SDMMC_BOOT2_D6"),
+ STM32_FUNCTION(12, "SDMMC1_D6 SDMMC_BOOT1_D6"),
+ STM32_FUNCTION(13, "FMC_A21"),
+ STM32_FUNCTION(14, "DCMI_D6"),
+ STM32_FUNCTION(15, "LCD_G0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(70, "PE6"),
+ STM32_FUNCTION(0, "GPIOE6"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(2, "TIM1_BKIN2"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(5, "TIM15_CH2"),
+ STM32_FUNCTION(6, "SPI4_MOSI"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(8, "SDMMC2_D0"),
+ STM32_FUNCTION(9, "SDMMC1_D2 SDMMC_BOOT1_D2"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(13, "FMC_A22"),
+ STM32_FUNCTION(14, "DCMI_D7"),
+ STM32_FUNCTION(15, "LCD_G1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(71, "PE7"),
+ STM32_FUNCTION(0, "GPIOE7"),
+ STM32_FUNCTION(2, "TIM1_ETR"),
+ STM32_FUNCTION(3, "TIM3_ETR"),
+ STM32_FUNCTION(4, "DFSDM_DATA2"),
+ STM32_FUNCTION(8, "UART7_RX"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO0 QUADSPI_BOOTBK2_IO0"),
+ STM32_FUNCTION(13, "FMC_D4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(72, "PE8"),
+ STM32_FUNCTION(0, "GPIOE8"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(4, "DFSDM_CK2"),
+ STM32_FUNCTION(8, "UART7_TX"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO1 QUADSPI_BOOTBK2_IO1"),
+ STM32_FUNCTION(13, "FMC_D5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(73, "PE9"),
+ STM32_FUNCTION(0, "GPIOE9"),
+ STM32_FUNCTION(2, "TIM1_CH1"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(8, "UART7_RTS UART_BOOT7_RTS"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO2 QUADSPI_BOOTBK2_IO2"),
+ STM32_FUNCTION(13, "FMC_D6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(74, "PE10"),
+ STM32_FUNCTION(0, "GPIOE10"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(4, "DFSDM_DATA4"),
+ STM32_FUNCTION(8, "UART7_CTS UART_BOOT7_CTS"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO3 QUADSPI_BOOTBK2_IO3"),
+ STM32_FUNCTION(13, "FMC_D7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(75, "PE11"),
+ STM32_FUNCTION(0, "GPIOE11"),
+ STM32_FUNCTION(2, "TIM1_CH2"),
+ STM32_FUNCTION(4, "DFSDM_CK4"),
+ STM32_FUNCTION(6, "SPI4_NSS"),
+ STM32_FUNCTION(8, "USART6_CK USART_BOOT6_CK"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(13, "FMC_D8"),
+ STM32_FUNCTION(15, "LCD_G3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(76, "PE12"),
+ STM32_FUNCTION(0, "GPIOE12"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(4, "DFSDM_DATA5"),
+ STM32_FUNCTION(6, "SPI4_SCK"),
+ STM32_FUNCTION(9, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(11, "SAI2_SCK_B"),
+ STM32_FUNCTION(13, "FMC_D9"),
+ STM32_FUNCTION(15, "LCD_B4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(77, "PE13"),
+ STM32_FUNCTION(0, "GPIOE13"),
+ STM32_FUNCTION(1, "HDP2"),
+ STM32_FUNCTION(2, "TIM1_CH3"),
+ STM32_FUNCTION(4, "DFSDM_CK5"),
+ STM32_FUNCTION(6, "SPI4_MISO"),
+ STM32_FUNCTION(11, "SAI2_FS_B"),
+ STM32_FUNCTION(13, "FMC_D10"),
+ STM32_FUNCTION(15, "LCD_DE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(78, "PE14"),
+ STM32_FUNCTION(0, "GPIOE14"),
+ STM32_FUNCTION(2, "TIM1_CH4"),
+ STM32_FUNCTION(6, "SPI4_MOSI"),
+ STM32_FUNCTION(9, "UART8_RTS UART_BOOT8_RTS"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(12, "SDMMC1_D123DIR SDMMC_BOOT1_D123DIR"),
+ STM32_FUNCTION(13, "FMC_D11"),
+ STM32_FUNCTION(14, "LCD_G0"),
+ STM32_FUNCTION(15, "LCD_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(79, "PE15"),
+ STM32_FUNCTION(0, "GPIOE15"),
+ STM32_FUNCTION(1, "HDP3"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(5, "TIM15_BKIN"),
+ STM32_FUNCTION(8, "USART2_CTS_NSS USART_BOOT2_CTS_NSS"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(13, "FMC_D12"),
+ STM32_FUNCTION(15, "LCD_R7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(80, "PF0"),
+ STM32_FUNCTION(0, "GPIOF0"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(10, "SDMMC3_D0"),
+ STM32_FUNCTION(11, "SDMMC3_CKIN"),
+ STM32_FUNCTION(13, "FMC_A0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(81, "PF1"),
+ STM32_FUNCTION(0, "GPIOF1"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(10, "SDMMC3_CMD"),
+ STM32_FUNCTION(11, "SDMMC3_CDIR"),
+ STM32_FUNCTION(13, "FMC_A1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(82, "PF2"),
+ STM32_FUNCTION(0, "GPIOF2"),
+ STM32_FUNCTION(5, "I2C2_SMBA"),
+ STM32_FUNCTION(10, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(11, "SDMMC3_D0DIR"),
+ STM32_FUNCTION(12, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(13, "FMC_A2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(83, "PF3"),
+ STM32_FUNCTION(0, "GPIOF3"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_ER ETH_MII_TX_ER"),
+ STM32_FUNCTION(13, "FMC_A3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(84, "PF4"),
+ STM32_FUNCTION(0, "GPIOF4"),
+ STM32_FUNCTION(8, "USART2_RX"),
+ STM32_FUNCTION(10, "SDMMC3_D1"),
+ STM32_FUNCTION(11, "SDMMC3_D123DIR"),
+ STM32_FUNCTION(13, "FMC_A4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(85, "PF5"),
+ STM32_FUNCTION(0, "GPIOF5"),
+ STM32_FUNCTION(8, "USART2_TX"),
+ STM32_FUNCTION(10, "SDMMC3_D2"),
+ STM32_FUNCTION(13, "FMC_A5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(86, "PF6"),
+ STM32_FUNCTION(0, "GPIOF6"),
+ STM32_FUNCTION(2, "TIM16_CH1"),
+ STM32_FUNCTION(6, "SPI5_NSS"),
+ STM32_FUNCTION(7, "SAI1_SD_B"),
+ STM32_FUNCTION(8, "UART7_RX UART_BOOT7_RX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO3 QUADSPI_BOOTBK1_IO3"),
+ STM32_FUNCTION(13, "SAI4_SCK_B"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(87, "PF7"),
+ STM32_FUNCTION(0, "GPIOF7"),
+ STM32_FUNCTION(2, "TIM17_CH1"),
+ STM32_FUNCTION(6, "SPI5_SCK"),
+ STM32_FUNCTION(7, "SAI1_MCLK_B"),
+ STM32_FUNCTION(8, "UART7_TX UART_BOOT7_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO2 QUADSPI_BOOTBK1_IO2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(88, "PF8"),
+ STM32_FUNCTION(0, "GPIOF8"),
+ STM32_FUNCTION(1, "TRACED12"),
+ STM32_FUNCTION(2, "TIM16_CH1N"),
+ STM32_FUNCTION(6, "SPI5_MISO"),
+ STM32_FUNCTION(7, "SAI1_SCK_B"),
+ STM32_FUNCTION(8, "UART7_RTS UART_BOOT7_RTS"),
+ STM32_FUNCTION(10, "TIM13_CH1"),
+ STM32_FUNCTION(11, "QUADSPI_BK1_IO0 QUADSPI_BOOTBK1_IO0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(89, "PF9"),
+ STM32_FUNCTION(0, "GPIOF9"),
+ STM32_FUNCTION(1, "TRACED13"),
+ STM32_FUNCTION(2, "TIM17_CH1N"),
+ STM32_FUNCTION(6, "SPI5_MOSI"),
+ STM32_FUNCTION(7, "SAI1_FS_B"),
+ STM32_FUNCTION(8, "UART7_CTS UART_BOOT7_CTS"),
+ STM32_FUNCTION(10, "TIM14_CH1"),
+ STM32_FUNCTION(11, "QUADSPI_BK1_IO1 QUADSPI_BOOTBK1_IO1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(90, "PF10"),
+ STM32_FUNCTION(0, "GPIOF10"),
+ STM32_FUNCTION(2, "TIM16_BKIN"),
+ STM32_FUNCTION(3, "SAI1_D3"),
+ STM32_FUNCTION(4, "SAI4_D4"),
+ STM32_FUNCTION(7, "SAI1_D4"),
+ STM32_FUNCTION(10, "QUADSPI_CLK QUADSPI_BOOTCLK"),
+ STM32_FUNCTION(13, "SAI4_D3"),
+ STM32_FUNCTION(14, "DCMI_D11"),
+ STM32_FUNCTION(15, "LCD_DE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(91, "PF11"),
+ STM32_FUNCTION(0, "GPIOF11"),
+ STM32_FUNCTION(6, "SPI5_MOSI"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(14, "DCMI_D12"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(92, "PF12"),
+ STM32_FUNCTION(0, "GPIOF12"),
+ STM32_FUNCTION(1, "TRACED4"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD4"),
+ STM32_FUNCTION(13, "FMC_A6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(93, "PF13"),
+ STM32_FUNCTION(0, "GPIOF13"),
+ STM32_FUNCTION(1, "TRACED5"),
+ STM32_FUNCTION(4, "DFSDM_DATA6"),
+ STM32_FUNCTION(5, "I2C4_SMBA"),
+ STM32_FUNCTION(6, "I2C1_SMBA"),
+ STM32_FUNCTION(7, "DFSDM_DATA3"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD5"),
+ STM32_FUNCTION(13, "FMC_A7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(94, "PF14"),
+ STM32_FUNCTION(0, "GPIOF14"),
+ STM32_FUNCTION(1, "TRACED6"),
+ STM32_FUNCTION(4, "DFSDM_CK6"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "I2C1_SCL"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD6"),
+ STM32_FUNCTION(13, "FMC_A8"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(95, "PF15"),
+ STM32_FUNCTION(0, "GPIOF15"),
+ STM32_FUNCTION(1, "TRACED7"),
+ STM32_FUNCTION(5, "I2C4_SDA"),
+ STM32_FUNCTION(6, "I2C1_SDA"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD7"),
+ STM32_FUNCTION(13, "FMC_A9"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(96, "PG0"),
+ STM32_FUNCTION(0, "GPIOG0"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(4, "DFSDM_DATA0"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD4"),
+ STM32_FUNCTION(13, "FMC_A10"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(97, "PG1"),
+ STM32_FUNCTION(0, "GPIOG1"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD5"),
+ STM32_FUNCTION(13, "FMC_A11"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(98, "PG2"),
+ STM32_FUNCTION(0, "GPIOG2"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(2, "MCO2"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD6"),
+ STM32_FUNCTION(13, "FMC_A12"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(99, "PG3"),
+ STM32_FUNCTION(0, "GPIOG3"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(4, "TIM8_BKIN2"),
+ STM32_FUNCTION(5, "DFSDM_CK1"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD7"),
+ STM32_FUNCTION(13, "FMC_A13"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(100, "PG4"),
+ STM32_FUNCTION(0, "GPIOG4"),
+ STM32_FUNCTION(2, "TIM1_BKIN2"),
+ STM32_FUNCTION(12, "ETH_GMII_GTX_CLK ETH_RGMII_GTX_CLK"),
+ STM32_FUNCTION(13, "FMC_A14"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(101, "PG5"),
+ STM32_FUNCTION(0, "GPIOG5"),
+ STM32_FUNCTION(2, "TIM1_ETR"),
+ STM32_FUNCTION(12, "ETH_GMII_CLK125 ETH_RGMII_CLK125"),
+ STM32_FUNCTION(13, "FMC_A15"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(102, "PG6"),
+ STM32_FUNCTION(0, "GPIOG6"),
+ STM32_FUNCTION(1, "TRACED14"),
+ STM32_FUNCTION(2, "TIM17_BKIN"),
+ STM32_FUNCTION(11, "SDMMC2_CMD SDMMC_BOOT2_CMD"),
+ STM32_FUNCTION(14, "DCMI_D12"),
+ STM32_FUNCTION(15, "LCD_R7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(103, "PG7"),
+ STM32_FUNCTION(0, "GPIOG7"),
+ STM32_FUNCTION(1, "TRACED5"),
+ STM32_FUNCTION(7, "SAI1_MCLK_A"),
+ STM32_FUNCTION(8, "USART6_CK USART_BOOT6_CK"),
+ STM32_FUNCTION(9, "UART8_RTS UART_BOOT8_RTS"),
+ STM32_FUNCTION(10, "QUADSPI_CLK"),
+ STM32_FUNCTION(12, "QUADSPI_BK2_IO3 QUADSPI_BOOTBK2_IO3"),
+ STM32_FUNCTION(13, "FMC_INT"),
+ STM32_FUNCTION(14, "DCMI_D13"),
+ STM32_FUNCTION(15, "LCD_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(104, "PG8"),
+ STM32_FUNCTION(0, "GPIOG8"),
+ STM32_FUNCTION(1, "TRACED15"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(3, "ETH_CLK"),
+ STM32_FUNCTION(4, "TIM8_ETR"),
+ STM32_FUNCTION(6, "SPI6_NSS"),
+ STM32_FUNCTION(7, "SAI4_D2"),
+ STM32_FUNCTION(8, "USART6_RTS USART_BOOT6_RTS"),
+ STM32_FUNCTION(9, "USART3_RTS"),
+ STM32_FUNCTION(10, "SPDIF_IN2"),
+ STM32_FUNCTION(11, "SAI4_FS_A"),
+ STM32_FUNCTION(12, "ETH_PPS_OUT"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(105, "PG9"),
+ STM32_FUNCTION(0, "GPIOG9"),
+ STM32_FUNCTION(1, "DBTRGO"),
+ STM32_FUNCTION(8, "USART6_RX"),
+ STM32_FUNCTION(9, "SPDIF_IN3"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO2 QUADSPI_BOOTBK2_IO2"),
+ STM32_FUNCTION(11, "SAI2_FS_B"),
+ STM32_FUNCTION(13, "FMC_NE2 FMC_NCE"),
+ STM32_FUNCTION(14, "DCMI_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(106, "PG10"),
+ STM32_FUNCTION(0, "GPIOG10"),
+ STM32_FUNCTION(1, "TRACED10"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(10, "LCD_G3"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(12, "QUADSPI_BK2_IO2 QUADSPI_BOOTBK2_IO2"),
+ STM32_FUNCTION(13, "FMC_NE3"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(107, "PG11"),
+ STM32_FUNCTION(0, "GPIOG11"),
+ STM32_FUNCTION(1, "TRACED11"),
+ STM32_FUNCTION(5, "USART1_TX"),
+ STM32_FUNCTION(7, "UART4_TX UART_BOOT4_TX"),
+ STM32_FUNCTION(9, "SPDIF_IN0"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_EN ETH_MII_TX_EN ETH_RGMII_TX_CTL ETH_RMII_TX_EN"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(15, "LCD_B3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(108, "PG12"),
+ STM32_FUNCTION(0, "GPIOG12"),
+ STM32_FUNCTION(2, "LPTIM1_IN1"),
+ STM32_FUNCTION(6, "SPI6_MISO"),
+ STM32_FUNCTION(7, "SAI4_CK2"),
+ STM32_FUNCTION(8, "USART6_RTS USART_BOOT6_RTS"),
+ STM32_FUNCTION(9, "SPDIF_IN1"),
+ STM32_FUNCTION(10, "LCD_B4"),
+ STM32_FUNCTION(11, "SAI4_SCK_A"),
+ STM32_FUNCTION(12, "ETH_PHY_INTN"),
+ STM32_FUNCTION(13, "FMC_NE4"),
+ STM32_FUNCTION(15, "LCD_B1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(109, "PG13"),
+ STM32_FUNCTION(0, "GPIOG13"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(2, "LPTIM1_OUT"),
+ STM32_FUNCTION(3, "SAI1_CK2"),
+ STM32_FUNCTION(5, "SAI4_CK1"),
+ STM32_FUNCTION(6, "SPI6_SCK"),
+ STM32_FUNCTION(7, "SAI1_SCK_A"),
+ STM32_FUNCTION(8, "USART6_CTS_NSS USART_BOOT6_CTS_NSS"),
+ STM32_FUNCTION(11, "SAI4_MCLK_A"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD0 ETH_MII_TXD0 ETH_RGMII_TXD0 ETH_RMII_TXD0"),
+ STM32_FUNCTION(13, "FMC_A24"),
+ STM32_FUNCTION(15, "LCD_R0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(110, "PG14"),
+ STM32_FUNCTION(0, "GPIOG14"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(2, "LPTIM1_ETR"),
+ STM32_FUNCTION(6, "SPI6_MOSI"),
+ STM32_FUNCTION(7, "SAI4_D1"),
+ STM32_FUNCTION(8, "USART6_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO3 QUADSPI_BOOTBK2_IO3"),
+ STM32_FUNCTION(11, "SAI4_SD_A"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD1 ETH_MII_TXD1 ETH_RGMII_TXD1 ETH_RMII_TXD1"),
+ STM32_FUNCTION(13, "FMC_A25"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(111, "PG15"),
+ STM32_FUNCTION(0, "GPIOG15"),
+ STM32_FUNCTION(1, "TRACED7"),
+ STM32_FUNCTION(3, "SAI1_D2"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(7, "SAI1_FS_A"),
+ STM32_FUNCTION(8, "USART6_CTS_NSS USART_BOOT6_CTS_NSS"),
+ STM32_FUNCTION(11, "SDMMC3_CK"),
+ STM32_FUNCTION(14, "DCMI_D13"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(112, "PH0"),
+ STM32_FUNCTION(0, "GPIOH0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(113, "PH1"),
+ STM32_FUNCTION(0, "GPIOH1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(114, "PH2"),
+ STM32_FUNCTION(0, "GPIOH2"),
+ STM32_FUNCTION(2, "LPTIM1_IN2"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO0 QUADSPI_BOOTBK2_IO0"),
+ STM32_FUNCTION(11, "SAI2_SCK_B"),
+ STM32_FUNCTION(12, "ETH_GMII_CRS ETH_MII_CRS"),
+ STM32_FUNCTION(15, "LCD_R0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(115, "PH3"),
+ STM32_FUNCTION(0, "GPIOH3"),
+ STM32_FUNCTION(4, "DFSDM_CK4"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO1 QUADSPI_BOOTBK2_IO1"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(12, "ETH_GMII_COL ETH_MII_COL"),
+ STM32_FUNCTION(15, "LCD_R1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(116, "PH4"),
+ STM32_FUNCTION(0, "GPIOH4"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(10, "LCD_G5"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(117, "PH5"),
+ STM32_FUNCTION(0, "GPIOH5"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(6, "SPI5_NSS"),
+ STM32_FUNCTION(13, "SAI4_SD_B"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(118, "PH6"),
+ STM32_FUNCTION(0, "GPIOH6"),
+ STM32_FUNCTION(3, "TIM12_CH1"),
+ STM32_FUNCTION(5, "I2C2_SMBA"),
+ STM32_FUNCTION(6, "SPI5_SCK"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD2 ETH_MII_RXD2 ETH_RGMII_RXD2"),
+ STM32_FUNCTION(13, "MDIOS_MDIO"),
+ STM32_FUNCTION(14, "DCMI_D8"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(119, "PH7"),
+ STM32_FUNCTION(0, "GPIOH7"),
+ STM32_FUNCTION(5, "I2C3_SCL"),
+ STM32_FUNCTION(6, "SPI5_MISO"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD3 ETH_MII_RXD3 ETH_RGMII_RXD3"),
+ STM32_FUNCTION(13, "MDIOS_MDC"),
+ STM32_FUNCTION(14, "DCMI_D9"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(120, "PH8"),
+ STM32_FUNCTION(0, "GPIOH8"),
+ STM32_FUNCTION(3, "TIM5_ETR"),
+ STM32_FUNCTION(5, "I2C3_SDA"),
+ STM32_FUNCTION(14, "DCMI_HSYNC"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(121, "PH9"),
+ STM32_FUNCTION(0, "GPIOH9"),
+ STM32_FUNCTION(3, "TIM12_CH2"),
+ STM32_FUNCTION(5, "I2C3_SMBA"),
+ STM32_FUNCTION(14, "DCMI_D0"),
+ STM32_FUNCTION(15, "LCD_R3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(122, "PH10"),
+ STM32_FUNCTION(0, "GPIOH10"),
+ STM32_FUNCTION(3, "TIM5_CH1"),
+ STM32_FUNCTION(5, "I2C4_SMBA"),
+ STM32_FUNCTION(6, "I2C1_SMBA"),
+ STM32_FUNCTION(14, "DCMI_D1"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(123, "PH11"),
+ STM32_FUNCTION(0, "GPIOH11"),
+ STM32_FUNCTION(3, "TIM5_CH2"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "I2C1_SCL"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(124, "PH12"),
+ STM32_FUNCTION(0, "GPIOH12"),
+ STM32_FUNCTION(1, "HDP2"),
+ STM32_FUNCTION(3, "TIM5_CH3"),
+ STM32_FUNCTION(5, "I2C4_SDA"),
+ STM32_FUNCTION(6, "I2C1_SDA"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(15, "LCD_R6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(125, "PH13"),
+ STM32_FUNCTION(0, "GPIOH13"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(15, "LCD_G2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(126, "PH14"),
+ STM32_FUNCTION(0, "GPIOH14"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(14, "DCMI_D4"),
+ STM32_FUNCTION(15, "LCD_G3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(127, "PH15"),
+ STM32_FUNCTION(0, "GPIOH15"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(14, "DCMI_D11"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(128, "PI0"),
+ STM32_FUNCTION(0, "GPIOI0"),
+ STM32_FUNCTION(3, "TIM5_CH4"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(14, "DCMI_D13"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(129, "PI1"),
+ STM32_FUNCTION(0, "GPIOI1"),
+ STM32_FUNCTION(4, "TIM8_BKIN2"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(14, "DCMI_D8"),
+ STM32_FUNCTION(15, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(130, "PI2"),
+ STM32_FUNCTION(0, "GPIOI2"),
+ STM32_FUNCTION(4, "TIM8_CH4"),
+ STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"),
+ STM32_FUNCTION(14, "DCMI_D9"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(131, "PI3"),
+ STM32_FUNCTION(0, "GPIOI3"),
+ STM32_FUNCTION(4, "TIM8_ETR"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(14, "DCMI_D10"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(132, "PI4"),
+ STM32_FUNCTION(0, "GPIOI4"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(11, "SAI2_MCLK_A"),
+ STM32_FUNCTION(14, "DCMI_D5"),
+ STM32_FUNCTION(15, "LCD_B4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(133, "PI5"),
+ STM32_FUNCTION(0, "GPIOI5"),
+ STM32_FUNCTION(4, "TIM8_CH1"),
+ STM32_FUNCTION(11, "SAI2_SCK_A"),
+ STM32_FUNCTION(14, "DCMI_VSYNC"),
+ STM32_FUNCTION(15, "LCD_B5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(134, "PI6"),
+ STM32_FUNCTION(0, "GPIOI6"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(11, "SAI2_SD_A"),
+ STM32_FUNCTION(14, "DCMI_D6"),
+ STM32_FUNCTION(15, "LCD_B6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(135, "PI7"),
+ STM32_FUNCTION(0, "GPIOI7"),
+ STM32_FUNCTION(4, "TIM8_CH3"),
+ STM32_FUNCTION(11, "SAI2_FS_A"),
+ STM32_FUNCTION(14, "DCMI_D7"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(136, "PI8"),
+ STM32_FUNCTION(0, "GPIOI8"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(137, "PI9"),
+ STM32_FUNCTION(0, "GPIOI9"),
+ STM32_FUNCTION(1, "HDP1"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(15, "LCD_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(138, "PI10"),
+ STM32_FUNCTION(0, "GPIOI10"),
+ STM32_FUNCTION(1, "HDP0"),
+ STM32_FUNCTION(9, "USART3_CTS_NSS USART_BOOT3_CTS_NSS"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_ER ETH_MII_RX_ER"),
+ STM32_FUNCTION(15, "LCD_HSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(139, "PI11"),
+ STM32_FUNCTION(0, "GPIOI11"),
+ STM32_FUNCTION(1, "MCO1"),
+ STM32_FUNCTION(6, "I2S_CKIN"),
+ STM32_FUNCTION(10, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(140, "PI12"),
+ STM32_FUNCTION(0, "GPIOI12"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(3, "HDP0"),
+ STM32_FUNCTION(15, "LCD_HSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(141, "PI13"),
+ STM32_FUNCTION(0, "GPIOI13"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(3, "HDP1"),
+ STM32_FUNCTION(15, "LCD_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(142, "PI14"),
+ STM32_FUNCTION(0, "GPIOI14"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(15, "LCD_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(143, "PI15"),
+ STM32_FUNCTION(0, "GPIOI15"),
+ STM32_FUNCTION(10, "LCD_G2"),
+ STM32_FUNCTION(15, "LCD_R0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(144, "PJ0"),
+ STM32_FUNCTION(0, "GPIOJ0"),
+ STM32_FUNCTION(1, "TRACED8"),
+ STM32_FUNCTION(10, "LCD_R7"),
+ STM32_FUNCTION(15, "LCD_R1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(145, "PJ1"),
+ STM32_FUNCTION(0, "GPIOJ1"),
+ STM32_FUNCTION(1, "TRACED9"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(146, "PJ2"),
+ STM32_FUNCTION(0, "GPIOJ2"),
+ STM32_FUNCTION(1, "TRACED10"),
+ STM32_FUNCTION(14, "DSI_TE"),
+ STM32_FUNCTION(15, "LCD_R3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(147, "PJ3"),
+ STM32_FUNCTION(0, "GPIOJ3"),
+ STM32_FUNCTION(1, "TRACED11"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(148, "PJ4"),
+ STM32_FUNCTION(0, "GPIOJ4"),
+ STM32_FUNCTION(1, "TRACED12"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(149, "PJ5"),
+ STM32_FUNCTION(0, "GPIOJ5"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(3, "HDP2"),
+ STM32_FUNCTION(15, "LCD_R6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(150, "PJ6"),
+ STM32_FUNCTION(0, "GPIOJ6"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(3, "HDP3"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(15, "LCD_R7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(151, "PJ7"),
+ STM32_FUNCTION(0, "GPIOJ7"),
+ STM32_FUNCTION(1, "TRACED13"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(15, "LCD_G0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(152, "PJ8"),
+ STM32_FUNCTION(0, "GPIOJ8"),
+ STM32_FUNCTION(1, "TRACED14"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(4, "TIM8_CH1"),
+ STM32_FUNCTION(9, "UART8_TX"),
+ STM32_FUNCTION(15, "LCD_G1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(153, "PJ9"),
+ STM32_FUNCTION(0, "GPIOJ9"),
+ STM32_FUNCTION(1, "TRACED15"),
+ STM32_FUNCTION(2, "TIM1_CH3"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(9, "UART8_RX"),
+ STM32_FUNCTION(15, "LCD_G2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(154, "PJ10"),
+ STM32_FUNCTION(0, "GPIOJ10"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(6, "SPI5_MOSI"),
+ STM32_FUNCTION(15, "LCD_G3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(155, "PJ11"),
+ STM32_FUNCTION(0, "GPIOJ11"),
+ STM32_FUNCTION(2, "TIM1_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(6, "SPI5_MISO"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(156, "PJ12"),
+ STM32_FUNCTION(0, "GPIOJ12"),
+ STM32_FUNCTION(10, "LCD_G3"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(157, "PJ13"),
+ STM32_FUNCTION(0, "GPIOJ13"),
+ STM32_FUNCTION(10, "LCD_G4"),
+ STM32_FUNCTION(15, "LCD_B1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(158, "PJ14"),
+ STM32_FUNCTION(0, "GPIOJ14"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(159, "PJ15"),
+ STM32_FUNCTION(0, "GPIOJ15"),
+ STM32_FUNCTION(15, "LCD_B3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(160, "PK0"),
+ STM32_FUNCTION(0, "GPIOK0"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(4, "TIM8_CH3"),
+ STM32_FUNCTION(6, "SPI5_SCK"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(161, "PK1"),
+ STM32_FUNCTION(0, "GPIOK1"),
+ STM32_FUNCTION(1, "TRACED4"),
+ STM32_FUNCTION(2, "TIM1_CH1"),
+ STM32_FUNCTION(3, "HDP4"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(6, "SPI5_NSS"),
+ STM32_FUNCTION(15, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(162, "PK2"),
+ STM32_FUNCTION(0, "GPIOK2"),
+ STM32_FUNCTION(1, "TRACED5"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(3, "HDP5"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(163, "PK3"),
+ STM32_FUNCTION(0, "GPIOK3"),
+ STM32_FUNCTION(15, "LCD_B4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(164, "PK4"),
+ STM32_FUNCTION(0, "GPIOK4"),
+ STM32_FUNCTION(15, "LCD_B5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(165, "PK5"),
+ STM32_FUNCTION(0, "GPIOK5"),
+ STM32_FUNCTION(1, "TRACED6"),
+ STM32_FUNCTION(3, "HDP6"),
+ STM32_FUNCTION(15, "LCD_B6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(166, "PK6"),
+ STM32_FUNCTION(0, "GPIOK6"),
+ STM32_FUNCTION(1, "TRACED7"),
+ STM32_FUNCTION(3, "HDP7"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(167, "PK7"),
+ STM32_FUNCTION(0, "GPIOK7"),
+ STM32_FUNCTION(15, "LCD_DE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+};
+
+static const struct stm32_desc_pin stm32mp157_z_pins[] = {
+ STM32_PIN(
+ PINCTRL_PIN(400, "PZ0"),
+ STM32_FUNCTION(0, "GPIOZ0"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"),
+ STM32_FUNCTION(8, "USART1_CK"),
+ STM32_FUNCTION(9, "SPI6_SCK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(401, "PZ1"),
+ STM32_FUNCTION(0, "GPIOZ1"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(9, "SPI6_MISO"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(402, "PZ2"),
+ STM32_FUNCTION(0, "GPIOZ2"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(5, "I2C5_SMBA"),
+ STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"),
+ STM32_FUNCTION(7, "I2C4_SMBA"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(9, "SPI6_MOSI"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(403, "PZ3"),
+ STM32_FUNCTION(0, "GPIOZ3"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_CTS_NSS"),
+ STM32_FUNCTION(9, "SPI6_NSS"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(404, "PZ4"),
+ STM32_FUNCTION(0, "GPIOZ4"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(5, "I2C5_SCL"),
+ STM32_FUNCTION(7, "I2C4_SCL"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(405, "PZ5"),
+ STM32_FUNCTION(0, "GPIOZ5"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_RTS"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(406, "PZ6"),
+ STM32_FUNCTION(0, "GPIOZ6"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(5, "USART1_CK"),
+ STM32_FUNCTION(6, "I2S1_MCK"),
+ STM32_FUNCTION(7, "I2C4_SMBA"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(407, "PZ7"),
+ STM32_FUNCTION(0, "GPIOZ7"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+};
+
+static struct stm32_pinctrl_match_data stm32mp157_match_data = {
+ .pins = stm32mp157_pins,
+ .npins = ARRAY_SIZE(stm32mp157_pins),
+};
+
+static struct stm32_pinctrl_match_data stm32mp157_z_match_data = {
+ .pins = stm32mp157_z_pins,
+ .npins = ARRAY_SIZE(stm32mp157_z_pins),
+};
+
+static const struct of_device_id stm32mp157_pctrl_match[] = {
+ {
+ .compatible = "st,stm32mp157-pinctrl",
+ .data = &stm32mp157_match_data,
+ },
+ {
+ .compatible = "st,stm32mp157-z-pinctrl",
+ .data = &stm32mp157_z_match_data,
+ },
+ { }
+};
+
+static struct platform_driver stm32mp157_pinctrl_driver = {
+ .probe = stm32_pctl_probe,
+ .driver = {
+ .name = "stm32mp157-pinctrl",
+ .of_match_table = stm32mp157_pctrl_match,
+ },
+};
+
+static int __init stm32mp157_pinctrl_init(void)
+{
+ return platform_driver_register(&stm32mp157_pinctrl_driver);
+}
+arch_initcall(stm32mp157_pinctrl_init);
--
2.7.4
From: Ludovic Barre <[email protected]>
Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1)
split in 2 elements:
-Daughter board (part number: STM32MP157C-ED1)
which includes CPU, memory and power supply
-Mother board (part number: STM32MP157C-EM1)
which includes external peripherals (like display, camera,...)
and extension connectors.
The daughter board can run alone, this is why the device tree files
are split in two layers, for the complete evaluation board (ev1)
and for the daughter board alone (ed1).
Signed-off-by: Ludovic Barre <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
---
arch/arm/boot/dts/Makefile | 5 ++++-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 13 +++++++++++++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +++++++++++++++++++
4 files changed, 65 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..ddfa3b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -839,7 +839,7 @@ dtb-$(CONFIG_ARCH_STI) += \
stih410-b2120.dtb \
stih410-b2260.dtb \
stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= \
+dtb-$(CONFIG_ARCH_STM32_MCU) += \
stm32f429-disco.dtb \
stm32f469-disco.dtb \
stm32f746-disco.dtb \
@@ -848,6 +848,9 @@ dtb-$(CONFIG_ARCH_STM32)+= \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb
+dtb-$(CONFIG_ARCH_STM32_MPU) += \
+ stm32mp157c-ed1.dtb \
+ stm32mp157c-ev1.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 440276a..7ac65f4 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -145,6 +145,19 @@
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
};
+
+ uart4_pins_a: uart4@0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
};
pinctrl_z: pin-controller-z {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000..f6a2618
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter";
+ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram";
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory {
+ reg = <0xC0000000 0x4000000>;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
new file mode 100644
index 0000000..a310703
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram";
+ stdout-path = "serial3:115200n8";
+ };
+};
+
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch prepares the STM32 machine for the integration of Cortex-A
based microprocessor (MPU), on top of the existing Cortex-M
microcontroller family (MCU). Since both MCUs and MPUs are sharing
common hardware blocks we can keep using ARCH_STM32 flag for most of
them. If a hardware block is specific to one family we can use either
ARCH_STM32_MCU or ARCH_STM32_MPU flag.
Signed-off-by: Ludovic Barre <[email protected]>
---
Documentation/arm/stm32/overview.txt | 21 +++++++--------
arch/arm/mach-stm32/Kconfig | 30 +++++++++++++++-------
arch/arm/mach-stm32/Makefile | 2 +-
arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
4 files changed, 33 insertions(+), 20 deletions(-)
rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
index a03b035..384cc7f 100644
--- a/Documentation/arm/stm32/overview.txt
+++ b/Documentation/arm/stm32/overview.txt
@@ -4,17 +4,17 @@
Introduction
------------
- The STMicroelectronics family of Cortex-M based MCUs are supported by the
- 'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
- and STM32F746 (Cortex-M7) are supported.
-
+ The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+ Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ ARM Linux.
Configuration
-------------
- A generic configuration is provided for STM32 family, and can be used as the
- default by
+ For MCUs, use the provided default configuration:
make stm32_defconfig
+ For MPUs, use multi_v7 configuration:
+ make multi_v7_defconfig
Layout
------
@@ -22,12 +22,13 @@ Layout
All the files for multiple machine families are located in the platform code
contained in arch/arm/mach-stm32
- There is a generic board board-dt.c in the mach folder which support
- Flattened Device Tree, which means, it works with any compatible board with
- Device Trees.
-
+ There are generic boards board-mcu-dt.c and board-mpu-dt.c files in the mach
+ folder which support Flattened Device Tree, which means, they work with any
+ compatible board with Device Trees.
Document Author
---------------
Maxime Coquelin <[email protected]>
+ Ludovic Barre <[email protected]>
+ Gerald Baeza <[email protected]>
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 0d1889b..c8059ea 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,31 +1,43 @@
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on ARM_SINGLE_ARMV7M
+menuconfig ARCH_STM32
+ bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
select ARCH_HAS_RESET_CONTROLLER
- select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
select STM32_EXTI
help
- Support for STMicroelectronics STM32 processors.
+ Support for STMicroelectronics STM32 MCU family
+
+if ARCH_STM32
+
+if ARM_SINGLE_ARMV7M
+
+config ARCH_STM32_MCU
+ bool "STMicrolectronics STM32 MCU"
+ select ARMV7M_SYSTICK
+ help
+ Support for STMicroelectronics STM32 Microcontrollers.
config MACH_STM32F429
bool "STMicrolectronics STM32F429"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
config MACH_STM32F469
bool "STMicrolectronics STM32F469"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
config MACH_STM32F746
bool "STMicrolectronics STM32F746"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
config MACH_STM32H743
bool "STMicrolectronics STM32H743"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
+
+endif
+
+endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index bd0b7b5..90c1b71 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -1 +1 @@
-obj-y += board-dt.o
+obj-$(CONFIG_ARCH_STM32_MCU) += board-mcu-dt.o
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-mcu-dt.c
similarity index 100%
rename from arch/arm/mach-stm32/board-dt.c
rename to arch/arm/mach-stm32/board-mcu-dt.c
--
2.7.4
From: Ludovic Barre <[email protected]>
This patch adds initial support of STM32MP157 microprocessor (MPU)
based on Arm Cortex-A7. Under new ARCH_STM32_MPU flag we select the
needed Cortex-A infrastructure (like gic, timer,...)
Signed-off-by: Ludovic Barre <[email protected]>
---
Documentation/arm/stm32/stm32mp157-overview.txt | 12 ++++++++++++
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
arch/arm/mach-stm32/Kconfig | 22 ++++++++++++++++++++--
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/board-mpu-dt.c | 16 ++++++++++++++++
5 files changed, 50 insertions(+), 2 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
diff --git a/Documentation/arm/stm32/stm32mp157-overview.txt b/Documentation/arm/stm32/stm32mp157-overview.txt
new file mode 100644
index 0000000..8a3e7cb
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.txt
@@ -0,0 +1,12 @@
+ STM32MP157 Overview
+ ===================
+
+ Introduction
+ ------------
+ The STM32MP157 is a Cortex-A MPU aimed at various applications.
+ It features:
+ - Dual core Cortex-A7 application core
+ - 2D/3D image composition with GPU
+ - Standard memories interface support
+ - Standard connectivity, widely inherited from the STM32 MCU family
+ - Comprehensive security support
diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
index 05762b0..6808ed9 100644
--- a/Documentation/devicetree/bindings/arm/stm32.txt
+++ b/Documentation/devicetree/bindings/arm/stm32.txt
@@ -7,3 +7,4 @@ using one of the following compatible strings:
st,stm32f469
st,stm32f746
st,stm32h743
+ st,stm32mp157
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index c8059ea..2b227c7 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,12 +1,12 @@
menuconfig ARCH_STM32
- bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
+ bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
select STM32_EXTI
help
- Support for STMicroelectronics STM32 MCU family
+ Support for STMicroelectronics STM32 MCU/MPU family
if ARCH_STM32
@@ -40,4 +40,22 @@ config MACH_STM32H743
endif
+if ARCH_MULTI_V7
+
+config ARCH_STM32_MPU
+ bool "STMicrolectronics STM32 MPU"
+ default y
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select ARM_PSCI
+ help
+ Support for STMicroelectronics STM32 Microprocessors.
+
+config MACH_STM32MP157
+ bool "STMicrolectronics STM32MP157"
+ depends on ARCH_STM32_MPU
+ default y
+
+endif
+
endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index 90c1b71..a405eb6 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ARCH_STM32_MCU) += board-mcu-dt.o
+obj-$(CONFIG_ARCH_STM32_MPU) += board-mpu-dt.o
diff --git a/arch/arm/mach-stm32/board-mpu-dt.c b/arch/arm/mach-stm32/board-mpu-dt.c
new file mode 100644
index 0000000..9e18405
--- /dev/null
+++ b/arch/arm/mach-stm32/board-mpu-dt.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <[email protected]> for STMicroelectronics.
+ */
+#include <asm/mach/arch.h>
+#include <linux/of_platform.h>
+
+static const char *const stm32mp_compat[] __initconst = {
+ "st,stm32mp157",
+ NULL
+};
+
+DT_MACHINE_START(STM32MPDT, "STM32 MP (Device Tree Support)")
+ .dt_compat = stm32mp_compat,
+MACHINE_END
--
2.7.4
On 08/12/2017 15:11, Ludovic Barre wrote:
> From: Ludovic Barre <[email protected]>
>
> This patch series extends the existing STM32 microcontrollers (MCUs)
> family to microprocessors (MPUs). The MPU platform (based on
> Arm Cortex-A) is a continuation of the MCU one (based on Arm
> Cortex-M) in that it shares a wide number of hardware blocks.
>
> Ludovic Barre (6):
> ARM: stm32: prepare stm32 family to welcome armv7 architecture
> ARM: stm32: add initial support for STM32MP157
> pinctrl: stm32: Add STM32MP157 MPU support
> ARM: configs: multi_v7: add stm32 support
> ARM: dts: stm32: add stm32mp157c initial support
> ARM: dts: stm32: add initial support of stm32mp157c eval board
>
> Documentation/arm/stm32/overview.txt | 21 +-
> Documentation/arm/stm32/stm32mp157-overview.txt | 12 +
> Documentation/devicetree/bindings/arm/stm32.txt | 1 +
> .../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
> arch/arm/boot/dts/Makefile | 5 +-
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
> arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
> arch/arm/configs/multi_v7_defconfig | 2 +
> arch/arm/mach-stm32/Kconfig | 48 +-
> arch/arm/mach-stm32/Makefile | 3 +-
> arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
> arch/arm/mach-stm32/board-mpu-dt.c | 16 +
> drivers/pinctrl/stm32/Kconfig | 6 +
> drivers/pinctrl/stm32/Makefile | 1 +
> drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
> 17 files changed, 2656 insertions(+), 21 deletions(-)
> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
> create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
> rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
> create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
> create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
>
Hi Ludovic,
This is great news !
But I couldn't find any announcement on ST ?
I'm curious, but which GPU will be embedded ?
The serie looks great, I don't have more comments on this.
Neil
On Fri, Dec 8, 2017 at 3:11 PM, Ludovic Barre <[email protected]> wrote:
> From: Ludovic Barre <[email protected]>
>
> This patch prepares the STM32 machine for the integration of Cortex-A
> based microprocessor (MPU), on top of the existing Cortex-M
> microcontroller family (MCU). Since both MCUs and MPUs are sharing
> common hardware blocks we can keep using ARCH_STM32 flag for most of
> them. If a hardware block is specific to one family we can use either
> ARCH_STM32_MCU or ARCH_STM32_MPU flag.
>
> Signed-off-by: Ludovic Barre <[email protected]>
So yesterdays application processors are todays MCU processors.
I said this on a lecture for control systems a while back and
stated it as a reason I think RTOSes are not really seeing a bright
future compared to Linux.
It happened quicker than I thought though, interesting.
Yours,
Linus Walleij
On Mon, Dec 11, 2017 at 11:25 AM, Linus Walleij
<[email protected]> wrote:
> On Fri, Dec 8, 2017 at 3:11 PM, Ludovic Barre <[email protected]> wrote:
>
>> From: Ludovic Barre <[email protected]>
>>
>> This patch prepares the STM32 machine for the integration of Cortex-A
>> based microprocessor (MPU), on top of the existing Cortex-M
>> microcontroller family (MCU). Since both MCUs and MPUs are sharing
>> common hardware blocks we can keep using ARCH_STM32 flag for most of
>> them. If a hardware block is specific to one family we can use either
>> ARCH_STM32_MCU or ARCH_STM32_MPU flag.
>>
>> Signed-off-by: Ludovic Barre <[email protected]>
To what degree do we need to treat them as separate families
at all then? I wonder if the MCU/MPU distinction is always that
clear along the Cortex-M/Cortex-A separation, especially if
we ever get to a chip that has both types of cores. What
exactly would we miss if we do away with the ARCH_STM32_MCU
symbol here?
> So yesterdays application processors are todays MCU processors.
>
> I said this on a lecture for control systems a while back and
> stated it as a reason I think RTOSes are not really seeing a bright
> future compared to Linux.
>
> It happened quicker than I thought though, interesting.
I think there is still lots of room for smaller RTOS in the long run,
but it's likely that the 'MPU + external DRAM' design point will
shift further to Linux, as there isn't really a benefit in squeezing
in anything smaller when the minimum is 32MB or 128MB of
RAM, depending on the interface.
For on-chip eDRAM or SRAM based MPUs, that doesn't hold
true, the memory size is what drives the cost here.
Arnd
On 12/11/2017 02:40 PM, Arnd Bergmann wrote:
> On Mon, Dec 11, 2017 at 11:25 AM, Linus Walleij
> <[email protected]> wrote:
>> On Fri, Dec 8, 2017 at 3:11 PM, Ludovic Barre <[email protected]> wrote:
>>
>>> From: Ludovic Barre <[email protected]>
>>>
>>> This patch prepares the STM32 machine for the integration of Cortex-A
>>> based microprocessor (MPU), on top of the existing Cortex-M
>>> microcontroller family (MCU). Since both MCUs and MPUs are sharing
>>> common hardware blocks we can keep using ARCH_STM32 flag for most of
>>> them. If a hardware block is specific to one family we can use either
>>> ARCH_STM32_MCU or ARCH_STM32_MPU flag.
>>>
>>> Signed-off-by: Ludovic Barre <[email protected]>
>
> To what degree do we need to treat them as separate families
> at all then? I wonder if the MCU/MPU distinction is always that
> clear along the Cortex-M/Cortex-A separation, especially if
> we ever get to a chip that has both types of cores. What
> exactly would we miss if we do away with the ARCH_STM32_MCU
> symbol here?
This patch series extends the existing STM32 microcontrollers (MCUs)
family to microprocessors (MPUs). Now, ARCH_STM32 groups STM32 chips
with Cortex-M or Cortex-A cores. But each core has different
infrastructure mpu vs mmu; nvic vs gic; systick vs arch_timer ...
So, ARCH_STM32_MCU/ARCH_STM32_MPU allow to define these specific blocks.
br
Ludo
>
>> So yesterdays application processors are todays MCU processors.
>>
>> I said this on a lecture for control systems a while back and
>> stated it as a reason I think RTOSes are not really seeing a bright
>> future compared to Linux.
>>
>> It happened quicker than I thought though, interesting.
>
> I think there is still lots of room for smaller RTOS in the long run,
> but it's likely that the 'MPU + external DRAM' design point will
> shift further to Linux, as there isn't really a benefit in squeezing
> in anything smaller when the minimum is 32MB or 128MB of
> RAM, depending on the interface.
>
> For on-chip eDRAM or SRAM based MPUs, that doesn't hold
> true, the memory size is what drives the cost here.
>
> Arnd
>
Hi,
On Mon, Dec 11, 2017 at 02:40:43PM +0100, Arnd Bergmann wrote:
> On Mon, Dec 11, 2017 at 11:25 AM, Linus Walleij
> >> This patch prepares the STM32 machine for the integration of Cortex-A
> >> based microprocessor (MPU), on top of the existing Cortex-M
> >> microcontroller family (MCU). Since both MCUs and MPUs are sharing
> >> common hardware blocks we can keep using ARCH_STM32 flag for most of
> >> them. If a hardware block is specific to one family we can use either
> >> ARCH_STM32_MCU or ARCH_STM32_MPU flag.
> To what degree do we need to treat them as separate families
> at all then? I wonder if the MCU/MPU distinction is always that
> clear along the Cortex-M/Cortex-A separation,
> What
> exactly would we miss if we do away with the ARCH_STM32_MCU
> symbol here?
Based on this patch series, the only difference seems to be w.r.t ARM
components, not peripherals outside ARM subystem. Vybrid VF610 is a
similar case, though not identical (it can have both instead of
either), deals w/o extra symbols,
8064887e02fd6 (ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC)
> especially if
> we ever get to a chip that has both types of cores.
Your wish fulfilled, Vybrid VF610 has both A5 & M4F and mainline Linux
boots on both (simultaneously as well), and the second Linux support,
i.e. on M4 went thr' your keyboard, see above commit :)
There are quite a few others as well, TI's AM335x (A8 + M3), AM437x
(A9 + M3), AM57x (A15 + M4), but of these Cortex M's, the one in AM57x
only can be Linux'able. On others they are meant for PM with limited
resources.
> > So yesterdays application processors are todays MCU processors.
> >
> > I said this on a lecture for control systems a while back and
> > stated it as a reason I think RTOSes are not really seeing a bright
> > future compared to Linux.
> I think there is still lots of room for smaller RTOS in the long run,
Me being an electrical engineer & worked to some extent in motor
control on RTOS/no OS (the value of my opinion is questionable
though), the thought of handling the same in Linux (even RT) sends
shivers down my spine. Here, case being considered is the type of
motor (like permanent magnet ones) where each phase of the motor has
to be properly excited during every PWM period (say every 100us,
depending on the feedback, algorithm, other synchronization) w/o which
the motor that has been told to run might try to fly. This is
different from stepper motor where if control misbehaves/stops nothing
harmful normally happens.
But my opinion is a kind of knee-jerk reaction and based on prevalent
atitude in that field, hmm.., probably i should attempt it first.
Regards
afzal
Hi all
-This patch serie hasn't goal to create a platform with
asymmetric linux processor (like vf610).
-Today, STM32 family have several boards with mcu microcontroler
Cortex-M like stm32f429, stm32f746...
And this patch serie prepare new board with support of Cortex-A
instead-of Cortex-M. (that's all)
BR
Ludo
On 12/12/2017 12:03 PM, afzal mohammed wrote:
> Hi,
>
> On Mon, Dec 11, 2017 at 02:40:43PM +0100, Arnd Bergmann wrote:
>> On Mon, Dec 11, 2017 at 11:25 AM, Linus Walleij
>
>>>> This patch prepares the STM32 machine for the integration of Cortex-A
>>>> based microprocessor (MPU), on top of the existing Cortex-M
>>>> microcontroller family (MCU). Since both MCUs and MPUs are sharing
>>>> common hardware blocks we can keep using ARCH_STM32 flag for most of
>>>> them. If a hardware block is specific to one family we can use either
>>>> ARCH_STM32_MCU or ARCH_STM32_MPU flag.
>
>> To what degree do we need to treat them as separate families
>> at all then? I wonder if the MCU/MPU distinction is always that
>> clear along the Cortex-M/Cortex-A separation,
>
>> What
>> exactly would we miss if we do away with the ARCH_STM32_MCU
>> symbol here?
>
> Based on this patch series, the only difference seems to be w.r.t ARM
> components, not peripherals outside ARM subystem. Vybrid VF610 is a
> similar case, though not identical (it can have both instead of
> either), deals w/o extra symbols,
>
> 8064887e02fd6 (ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC)
>
>> especially if
>> we ever get to a chip that has both types of cores.
>
> Your wish fulfilled, Vybrid VF610 has both A5 & M4F and mainline Linux
> boots on both (simultaneously as well), and the second Linux support,
> i.e. on M4 went thr' your keyboard, see above commit :)
>
> There are quite a few others as well, TI's AM335x (A8 + M3), AM437x
> (A9 + M3), AM57x (A15 + M4), but of these Cortex M's, the one in AM57x
> only can be Linux'able. On others they are meant for PM with limited
> resources.
>
>>> So yesterdays application processors are todays MCU processors.
>>>
>>> I said this on a lecture for control systems a while back and
>>> stated it as a reason I think RTOSes are not really seeing a bright
>>> future compared to Linux.
>
>> I think there is still lots of room for smaller RTOS in the long run,
>
> Me being an electrical engineer & worked to some extent in motor
> control on RTOS/no OS (the value of my opinion is questionable
> though), the thought of handling the same in Linux (even RT) sends
> shivers down my spine. Here, case being considered is the type of
> motor (like permanent magnet ones) where each phase of the motor has
> to be properly excited during every PWM period (say every 100us,
> depending on the feedback, algorithm, other synchronization) w/o which
> the motor that has been told to run might try to fly. This is
> different from stepper motor where if control misbehaves/stops nothing
> harmful normally happens.
>
> But my opinion is a kind of knee-jerk reaction and based on prevalent
> atitude in that field, hmm.., probably i should attempt it first.
>
> Regards
> afzal
>
On Fri, Dec 08, 2017 at 03:11:13PM +0100, Ludovic Barre wrote:
> From: Ludovic Barre <[email protected]>
>
> This patch adds initial support of STM32MP157 microprocessor (MPU)
> based on Arm Cortex-A7. Under new ARCH_STM32_MPU flag we select the
> needed Cortex-A infrastructure (like gic, timer,...)
>
> Signed-off-by: Ludovic Barre <[email protected]>
> ---
> Documentation/arm/stm32/stm32mp157-overview.txt | 12 ++++++++++++
> Documentation/devicetree/bindings/arm/stm32.txt | 1 +
Please split bindings to separate patches.
> arch/arm/mach-stm32/Kconfig | 22 ++++++++++++++++++++--
> arch/arm/mach-stm32/Makefile | 1 +
> arch/arm/mach-stm32/board-mpu-dt.c | 16 ++++++++++++++++
> 5 files changed, 50 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
> create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
>
> diff --git a/Documentation/arm/stm32/stm32mp157-overview.txt b/Documentation/arm/stm32/stm32mp157-overview.txt
> new file mode 100644
> index 0000000..8a3e7cb
> --- /dev/null
> +++ b/Documentation/arm/stm32/stm32mp157-overview.txt
I think new documentation files should be rst format and fit into the
built documentation. We don't have an SoC description doc for most SoCs.
> @@ -0,0 +1,12 @@
> + STM32MP157 Overview
> + ===================
> +
> + Introduction
> + ------------
> + The STM32MP157 is a Cortex-A MPU aimed at various applications.
> + It features:
> + - Dual core Cortex-A7 application core
> + - 2D/3D image composition with GPU
> + - Standard memories interface support
> + - Standard connectivity, widely inherited from the STM32 MCU family
> + - Comprehensive security support
Perhaps make this part of the kconfig entry help.
> diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
> index 05762b0..6808ed9 100644
> --- a/Documentation/devicetree/bindings/arm/stm32.txt
> +++ b/Documentation/devicetree/bindings/arm/stm32.txt
> @@ -7,3 +7,4 @@ using one of the following compatible strings:
> st,stm32f469
> st,stm32f746
> st,stm32h743
> + st,stm32mp157
> diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
> index c8059ea..2b227c7 100644
> --- a/arch/arm/mach-stm32/Kconfig
> +++ b/arch/arm/mach-stm32/Kconfig
> @@ -1,12 +1,12 @@
> menuconfig ARCH_STM32
> - bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
> + bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
> select ARCH_HAS_RESET_CONTROLLER
> select CLKSRC_STM32
> select PINCTRL
> select RESET_CONTROLLER
> select STM32_EXTI
> help
> - Support for STMicroelectronics STM32 MCU family
> + Support for STMicroelectronics STM32 MCU/MPU family
>
> if ARCH_STM32
>
> @@ -40,4 +40,22 @@ config MACH_STM32H743
>
> endif
>
> +if ARCH_MULTI_V7
> +
> +config ARCH_STM32_MPU
> + bool "STMicrolectronics STM32 MPU"
> + default y
> + select ARM_GIC
> + select HAVE_ARM_ARCH_TIMER
> + select ARM_PSCI
> + help
> + Support for STMicroelectronics STM32 Microprocessors.
> +
> +config MACH_STM32MP157
Is this actually used?
> + bool "STMicrolectronics STM32MP157"
> + depends on ARCH_STM32_MPU
> + default y
> +
> +endif
> +
> endif
On Fri, Dec 08, 2017 at 03:11:14PM +0100, Ludovic Barre wrote:
> From: Ludovic Barre <[email protected]>
>
> This driver consists of 2 controllers due to a hole in mapping:
> -1 controller for GPIO bankA to K.
> -1 controller for GPIO bankZ.
>
> Signed-off-by: Alexandre Torgue <[email protected]>
> Signed-off-by: Ludovic Barre <[email protected]>
> ---
> .../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
Reviewed-by: Rob Herring <[email protected]>
> drivers/pinctrl/stm32/Kconfig | 6 +
> drivers/pinctrl/stm32/Makefile | 1 +
> drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
> 4 files changed, 2197 insertions(+)
> create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
On 12/13/2017 12:24 AM, Rob Herring wrote:
> On Fri, Dec 08, 2017 at 03:11:13PM +0100, Ludovic Barre wrote:
>> From: Ludovic Barre <[email protected]>
>>
>> This patch adds initial support of STM32MP157 microprocessor (MPU)
>> based on Arm Cortex-A7. Under new ARCH_STM32_MPU flag we select the
>> needed Cortex-A infrastructure (like gic, timer,...)
>>
>> Signed-off-by: Ludovic Barre <[email protected]>
>> ---
>> Documentation/arm/stm32/stm32mp157-overview.txt | 12 ++++++++++++
>> Documentation/devicetree/bindings/arm/stm32.txt | 1 +
>
> Please split bindings to separate patches.
OK, I will split stm32.txt in separate commit
>
>> arch/arm/mach-stm32/Kconfig | 22 ++++++++++++++++++++--
>> arch/arm/mach-stm32/Makefile | 1 +
>> arch/arm/mach-stm32/board-mpu-dt.c | 16 ++++++++++++++++
>> 5 files changed, 50 insertions(+), 2 deletions(-)
>> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
>> create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
>>
>> diff --git a/Documentation/arm/stm32/stm32mp157-overview.txt b/Documentation/arm/stm32/stm32mp157-overview.txt
>> new file mode 100644
>> index 0000000..8a3e7cb
>> --- /dev/null
>> +++ b/Documentation/arm/stm32/stm32mp157-overview.txt
>
> I think new documentation files should be rst format and fit into the
> built documentation. We don't have an SoC description doc for most SoCs.
the existing documentation of stm32 are txt format
-overview.txt
-stm32f429-overwiew.txt
-stm32f746-overview.txt
-stm32h743-overview.txt
what do you prefer:
-omit stm32mp157-overview.txt of this serie and change all in next commit.
-write only this file in rst format
-change all in this serie?
>
>> @@ -0,0 +1,12 @@
>> + STM32MP157 Overview
>> + ===================
>> +
>> + Introduction
>> + ------------
>> + The STM32MP157 is a Cortex-A MPU aimed at various applications.
>> + It features:
>> + - Dual core Cortex-A7 application core
>> + - 2D/3D image composition with GPU
>> + - Standard memories interface support
>> + - Standard connectivity, widely inherited from the STM32 MCU family
>> + - Comprehensive security support
>
> Perhaps make this part of the kconfig entry help.
yes, I could add some details in MACH_STM32MP157 kconfig entry
>
>> diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
>> index 05762b0..6808ed9 100644
>> --- a/Documentation/devicetree/bindings/arm/stm32.txt
>> +++ b/Documentation/devicetree/bindings/arm/stm32.txt
>> @@ -7,3 +7,4 @@ using one of the following compatible strings:
>> st,stm32f469
>> st,stm32f746
>> st,stm32h743
>> + st,stm32mp157
>> diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
>> index c8059ea..2b227c7 100644
>> --- a/arch/arm/mach-stm32/Kconfig
>> +++ b/arch/arm/mach-stm32/Kconfig
>> @@ -1,12 +1,12 @@
>> menuconfig ARCH_STM32
>> - bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
>> + bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
>> select ARCH_HAS_RESET_CONTROLLER
>> select CLKSRC_STM32
>> select PINCTRL
>> select RESET_CONTROLLER
>> select STM32_EXTI
>> help
>> - Support for STMicroelectronics STM32 MCU family
>> + Support for STMicroelectronics STM32 MCU/MPU family
>>
>> if ARCH_STM32
>>
>> @@ -40,4 +40,22 @@ config MACH_STM32H743
>>
>> endif
>>
>> +if ARCH_MULTI_V7
>> +
>> +config ARCH_STM32_MPU
>> + bool "STMicrolectronics STM32 MPU"
>> + default y
>> + select ARM_GIC
>> + select HAVE_ARM_ARCH_TIMER
>> + select ARM_PSCI
>> + help
>> + Support for STMicroelectronics STM32 Microprocessors.
>> +
>> +config MACH_STM32MP157
>
> Is this actually used?
Yes, it's used in pinctrl driver.
>
>> + bool "STMicrolectronics STM32MP157"
>> + depends on ARCH_STM32_MPU
>> + default y
>> +
>> +endif
>> +
>> endif