This is the start of the stable review cycle for the 4.9.71 release.
There are 177 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed Dec 20 15:28:22 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.71-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.71-rc1
Miaoqing Pan <[email protected]>
ath9k: fix tx99 potential info leak
Matteo Croce <[email protected]>
icmp: don't fail on fragment reassembly time exceeded
Alex Vesker <[email protected]>
IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop
Bart Van Assche <[email protected]>
RDMA/cma: Avoid triggering undefined behavior
Alexander Duyck <[email protected]>
macvlan: Only deliver one copy of the frame to the macvlan interface
Jan Kara <[email protected]>
udf: Avoid overflow when session starts at large offset
Dan Carpenter <[email protected]>
scsi: bfa: integer overflow in debugfs
weiping zhang <[email protected]>
scsi: sd: change allow_restart to bool in sysfs interface
weiping zhang <[email protected]>
scsi: sd: change manage_start_stop to bool in sysfs interface
Jia-Ju Bai <[email protected]>
rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd
Jia-Ju Bai <[email protected]>
rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd
Jia-Ju Bai <[email protected]>
vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend
Parav Pandit <[email protected]>
IB/core: Fix calculation of maximum RoCE MTU
Kurt Garloff <[email protected]>
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
NeilBrown <[email protected]>
raid5: Set R5_Expanded on parity devices as well as data.
Linus Walleij <[email protected]>
pinctrl: adi2: Fix Kconfig build problem
Bin Liu <[email protected]>
usb: musb: da8xx: fix babble condition handling
nixiaoming <[email protected]>
tty fix oops when rmmod 8250
Matthias Brugger <[email protected]>
soc: mediatek: pwrap: fix compiler errors
Michael Ellerman <[email protected]>
powerpc/perf/hv-24x7: Fix incorrect comparison in memord
Martin Wilck <[email protected]>
scsi: hpsa: destroy sas transport properties before scsi_host
Martin Wilck <[email protected]>
scsi: hpsa: cleanup sas_phy structures in sysfs when unloading
Alex Williamson <[email protected]>
PCI: Detach driver before procfs & sysfs teardown on device remove
Leon Romanovsky <[email protected]>
RDMA/cxgb4: Declare stag as __be32
Christoph Hellwig <[email protected]>
xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real
Brian Foster <[email protected]>
xfs: fix log block underflow during recovery cycle verification
Jiri Slaby <[email protected]>
l2tp: cleanup l2tp_tunnel_delete calls
Christoph Hellwig <[email protected]>
nvme: use kref_get_unless_zero in nvme_find_get_ns
Osama Khan <[email protected]>
platform/x86: hp_accel: Add quirk for HP ProBook 440 G4
Christophe JAILLET <[email protected]>
btrfs: tests: Fix a memory leak in error handling path in 'run_test()'
Nick Desaulniers <[email protected]>
arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27
Patel Jay P <[email protected]>
Ib/hfi1: Return actual operational VLs in port info query
tang.junhui <[email protected]>
bcache: fix wrong cache_misses statistics
Liang Chen <[email protected]>
bcache: explicitly destroy mutex while exiting
Bob Peterson <[email protected]>
GFS2: Take inode off order_write list when setting jdata flag
Douglas Gilbert <[email protected]>
scsi: scsi_debug: write_same: fix error report
Daniel Lezcano <[email protected]>
thermal/drivers/step_wise: Fix temperature regulation misbehavior
Kuninori Morimoto <[email protected]>
ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod
Gao Feng <[email protected]>
ppp: Destroy the mutex when cleanup
Michał Mirosław <[email protected]>
clk: tegra: Fix cclk_lp divisor register
Leo Yan <[email protected]>
clk: hi6220: mark clock cs_atb_syspll as critical
Sébastien Szymanski <[email protected]>
clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
Chen Zhong <[email protected]>
clk: mediatek: add the option for determining PLL source clock
Jan Kara <[email protected]>
mm: Handle 0 flags in _calc_vm_trans() macro
Robert Baronescu <[email protected]>
crypto: tcrypt - fix buffer lengths in test_aead_speed()
Suzuki K Poulose <[email protected]>
arm-ccn: perf: Prevent module unload while PMU is in use
Eryu Guan <[email protected]>
xfs: truncate pagecache before writeback in xfs_setattr_size()
Gary R Hook <[email protected]>
iommu/amd: Limit the IOVA page range to the specified addresses
Liu Bo <[email protected]>
badblocks: fix wrong return value in badblocks_set if badblocks are disabled
Jiang Yi <[email protected]>
target/file: Do not return error for UNMAP if length is zero
tangwenji <[email protected]>
target:fix condition return in core_pr_dump_initiator_port()
tangwenji <[email protected]>
iscsi-target: fix memory leak in lio_target_tiqn_addtpg()
Bart Van Assche <[email protected]>
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
Markus Elfring <[email protected]>
platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
Kuppuswamy Sathyanarayanan <[email protected]>
platform/x86: intel_punit_ipc: Fix resource ioremap warning
Christophe Leroy <[email protected]>
powerpc/ipic: Fix status get and status clear
William A. Kennington III <[email protected]>
powerpc/opal: Fix EBUSY bug in acquiring tokens
KUWAZAWA Takuya <[email protected]>
netfilter: ipvs: Fix inappropriate output of procfs
Matthias Brugger <[email protected]>
iommu/mediatek: Fix driver name
Mika Westerberg <[email protected]>
PCI: Do not allocate more buses than available in parent
Shriya <[email protected]>
powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo
Qiang <[email protected]>
PCI/PME: Handle invalid data when reading Root Status
Peter Ujfalusi <[email protected]>
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
Pankaj Bharadiya <[email protected]>
ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case
Philipp Zabel <[email protected]>
rtc: pcf8563: fix output clock rate
Christophe JAILLET <[email protected]>
video: fbdev: au1200fb: Return an error code if a memory allocation fails
Christophe JAILLET <[email protected]>
video: fbdev: au1200fb: Release some resources if a memory allocation fails
Ladislav Michl <[email protected]>
video: udlfb: Fix read EDID timeout
Geert Uytterhoeven <[email protected]>
fbdev: controlfb: Add missing modes to fix out of bounds access
Robert Stonehouse <[email protected]>
sfc: don't warn on successful change of MAC
Sébastien Szymanski <[email protected]>
HID: cp2112: fix broken gpio_direction_input callback
Dou Liyang <[email protected]>
Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"
Mike Christie <[email protected]>
target: fix race during implicit transition work flushes
Mike Christie <[email protected]>
target: fix ALUA transition timeout handling
Mike Christie <[email protected]>
target: Use system workqueue for ALUA transitions
Zygo Blaxell <[email protected]>
btrfs: add missing memset while reading compressed inline extents
Olga Kornievskaia <[email protected]>
NFSv4.1 respect server's max size in CREATE_SESSION
Daniel Drake <[email protected]>
efi/esrt: Cleanup bad memory map log messages
Daniel Borkmann <[email protected]>
perf symbols: Fix symbols__fixup_end heuristic for corner cases
Dmitry Vyukov <[email protected]>
tty: fix data race in tty_ldisc_ref_wait()
Dmitry Vyukov <[email protected]>
tty: don't panic on OOM in tty_set_ldisc()
David Howells <[email protected]>
rxrpc: Ignore BUSY packets on old calls
David Ahern <[email protected]>
net: mpls: Fix nexthop alive tracking on down events
Jack Morgenstein <[email protected]>
net/mlx4_core: Avoid delays during VF driver device shutdown
Sagi Grimberg <[email protected]>
nvmet-rdma: Fix a possible uninitialized variable dereference
Sagi Grimberg <[email protected]>
nvmet: confirm sq percpu has scheduled and switched to atomic
Sagi Grimberg <[email protected]>
nvme-loop: fix a possible use-after-free when destroying the admin queue
David Howells <[email protected]>
afs: Fix abort on signal while waiting for call completion
David Howells <[email protected]>
afs: Fix afs_kill_pages()
David Howells <[email protected]>
afs: Fix page leak in afs_write_begin()
Marc Dionne <[email protected]>
afs: Populate and use client modification time
David Howells <[email protected]>
afs: Better abort and net error handling
David Howells <[email protected]>
afs: Invalid op ID should abort with RXGEN_OPCODE
David Howells <[email protected]>
afs: Fix the maths in afs_fs_store_data()
Tina Ruchandani <[email protected]>
afs: Prevent callback expiry timer overflow
Tina Ruchandani <[email protected]>
afs: Migrate vlocation fields to 64-bit
David Howells <[email protected]>
afs: Flush outstanding writes when an fd is closed
Marc Dionne <[email protected]>
afs: Deal with an empty callback array
Marc Dionne <[email protected]>
afs: Adjust mode bits processing
Marc Dionne <[email protected]>
afs: Populate group ID from vnode status
David Howells <[email protected]>
afs: Fix missing put_page()
Alex Deucher <[email protected]>
drm/radeon: reinstate oland workaround for sclk
yong mao <[email protected]>
mmc: mediatek: Fixed bug where clock frequency could be set wrong
Steven Rostedt (VMware) <[email protected]>
sched/deadline: Use deadline instead of period when calculating overflow
Daniel Bristot de Oliveira <[email protected]>
sched/deadline: Throttle a constrained deadline task activated after the deadline
Daniel Bristot de Oliveira <[email protected]>
sched/deadline: Make sure the replenishment timer fires in the next period
Wanpeng Li <[email protected]>
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
Sara Sharon <[email protected]>
iwlwifi: mvm: cleanup pending frames in DQA mode
Vitaly Kuznetsov <[email protected]>
Drivers: hv: util: move waiting for release to hv_utils_transport itself
Alex Deucher <[email protected]>
drm/radeon/si: add dpm quirk for Oland
Taku Izumi <[email protected]>
fjes: Fix wrong netdevice feature flags
Don Brace <[email protected]>
scsi: hpsa: do not timeout reset operations
Don Brace <[email protected]>
scsi: hpsa: limit outstanding rescans
Don Brace <[email protected]>
scsi: hpsa: update check for logical volume status
Kuninori Morimoto <[email protected]>
ASoC: rcar: clear DE bit only in PDMACHCR when it stops
Stafford Horne <[email protected]>
openrisc: fix issue handling 8 byte get_user calls
Alexander Shishkin <[email protected]>
intel_th: pci: Add Gemini Lake support
Arnd Bergmann <[email protected]>
drm: amd: remove broken include path
Ram Amrani <[email protected]>
qed: Fix interrupt flags on Rx LL2
Mintz, Yuval <[email protected]>
qed: Fix mapping leak on LL2 rx flow
Ram Amrani <[email protected]>
qed: Align CIDs according to DORQ requirement
Jiri Pirko <[email protected]>
mlxsw: reg: Fix SPVMLR max record count
Jiri Pirko <[email protected]>
mlxsw: reg: Fix SPVM max record count
Vlad Yasevich <[email protected]>
net: Resend IGMP memberships upon peer notification.
Arnd Bergmann <[email protected]>
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
Matthias Kaehlcke <[email protected]>
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
Johan Hovold <[email protected]>
net: wimax/i2400m: fix NULL-deref at probe
Tahsin Erdogan <[email protected]>
writeback: fix memory leak in wb_queue_work()
Sagi Grimberg <[email protected]>
blk-mq: Fix tagset reinit in the presence of cpu hot-unplug
Hiroyuki Yokoyama <[email protected]>
ASoC: rsnd: fix sound route path when using SRC6/SRC9
Florian Westphal <[email protected]>
netfilter: bridge: honor frag_max_size when refragmenting
Tomi Valkeinen <[email protected]>
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
Dmitry Torokhov <[email protected]>
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
NeilBrown <[email protected]>
NFSD: fix nfsd_reset_versions for NFSv4.
NeilBrown <[email protected]>
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
Dave Airlie <[email protected]>
drm/amdgpu: fix parser init error path to avoid crash in parser fini
Oleksandr Tyshchenko <[email protected]>
iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it
Daniel Jurgens <[email protected]>
net/mlx5: Don't save PCI state when PCI error is detected
Paul Blakey <[email protected]>
net/mlx5: Fix create autogroup prev initializer
David Howells <[email protected]>
rxrpc: Wake up the transmitter if Rx window size increases on the peer
Doug Berger <[email protected]>
net: bcmgenet: Power up the internal PHY before probing the MII
Doug Berger <[email protected]>
net: bcmgenet: synchronize irq0 status between the isr and task
Doug Berger <[email protected]>
net: bcmgenet: power down internal phy if open or resume fails
Doug Berger <[email protected]>
net: bcmgenet: reserved phy revisions must be checked first
Doug Berger <[email protected]>
net: bcmgenet: correct MIB access of UniMAC RUNT counters
Doug Berger <[email protected]>
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
Michael Chan <[email protected]>
bnxt_en: Ignore 0 value in autoneg supported speed from firmware.
Alexander Potapenko <[email protected]>
net: initialize msg.msg_flags in recvfrom
Andrea Arcangeli <[email protected]>
userfaultfd: selftest: vm: allow to build in vm/ directory
Andrea Arcangeli <[email protected]>
userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE
Guoqing Jiang <[email protected]>
md-cluster: free md_cluster_info if node leave cluster
Chunfeng Yun <[email protected]>
usb: xhci-mtk: check hcc_params after adding primary hcd
Radim Krčmář <[email protected]>
KVM: nVMX: do not warn when MSR bitmap address is not backed
Javier Martinez Canillas <[email protected]>
usb: phy: isp1301: Add OF device ID table
Ilan peer <[email protected]>
mac80211: Fix addition of mesh configuration element
Chandan Rajendra <[email protected]>
ext4: fix crash when a directory's i_size is too small
Eryu Guan <[email protected]>
ext4: fix fdatasync(2) after fallocate(2) operation
Adam Wallis <[email protected]>
dmaengine: dmatest: move callback wait queue to thread context
David Lechner <[email protected]>
eeprom: at24: change nvmem stride to 1
Steven Rostedt <[email protected]>
sched/rt: Do not pull from current CPU if only one CPU to pull
Scott Mayhew <[email protected]>
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
Mathias Nyman <[email protected]>
xhci: Don't add a virt_dev to the devs array before it's fully allocated
Sukumar Ghorai <[email protected]>
Bluetooth: btusb: driver to enable the usb-wakeup feature
Chunfeng Yun <[email protected]>
usb: xhci: fix TDS for MTK xHCI1.1
Yan, Zheng <[email protected]>
ceph: drop negative child dentries before try pruning inode's alias
Shuah Khan <[email protected]>
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
Shuah Khan <[email protected]>
usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
Felipe Balbi <[email protected]>
usb: add helper to extract bits 12:11 of wMaxPacketSize
Shuah Khan <[email protected]>
usbip: fix stub_rx: get_pipe() to validate endpoint number
Alan Stern <[email protected]>
USB: core: prevent malicious bNumInterfaces overflow
David Kozub <[email protected]>
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
Changbin Du <[email protected]>
tracing: Allocate mask_str buffer dynamically
NeilBrown <[email protected]>
autofs: fix careless error in recent commit
Eric Biggers <[email protected]>
crypto: salsa20 - fix blkcipher_walk API usage
Eric Biggers <[email protected]>
crypto: hmac - require that the underlying hash algorithm is unkeyed
Eric Biggers <[email protected]>
crypto: rsa - fix buffer overread when stripping leading zeroes
Martin Kaiser <[email protected]>
mfd: fsl-imx25: Clean up irq settings during removal
-------------
Diffstat:
Makefile | 4 +-
arch/arm64/Makefile | 8 +-
arch/blackfin/Kconfig | 7 +-
arch/blackfin/Kconfig.debug | 1 +
arch/openrisc/include/asm/uaccess.h | 2 +-
arch/powerpc/perf/hv-24x7.c | 2 +-
arch/powerpc/platforms/powernv/opal-async.c | 6 +-
arch/powerpc/platforms/powernv/setup.c | 2 +-
arch/powerpc/sysdev/ipic.c | 4 +-
arch/x86/crypto/salsa20_glue.c | 7 -
arch/x86/kernel/acpi/boot.c | 2 +-
arch/x86/kvm/vmx.c | 4 +-
block/badblocks.c | 2 +-
block/blk-mq-tag.c | 3 +
crypto/hmac.c | 6 +-
crypto/rsa_helper.c | 2 +-
crypto/salsa20_generic.c | 7 -
crypto/shash.c | 5 +-
crypto/tcrypt.c | 6 +-
drivers/acpi/acpi_processor.c | 5 -
drivers/acpi/bus.c | 1 -
drivers/acpi/processor_core.c | 73 ----------
drivers/bluetooth/btusb.c | 5 +
drivers/bus/arm-ccn.c | 1 +
drivers/clk/hisilicon/clk-hi6220.c | 2 +-
drivers/clk/imx/clk-imx6q.c | 2 +-
drivers/clk/mediatek/clk-mtk.h | 1 +
drivers/clk/mediatek/clk-pll.c | 5 +-
drivers/clk/tegra/clk-tegra30.c | 2 +-
drivers/dma/dmaengine.c | 2 +
drivers/dma/dmatest.c | 55 +++----
drivers/dma/ti-dma-crossbar.c | 8 +-
drivers/firmware/efi/efi.c | 1 -
drivers/firmware/efi/esrt.c | 2 +-
drivers/gpu/drm/amd/acp/Makefile | 2 -
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +
drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 3 -
drivers/gpu/drm/radeon/si_dpm.c | 10 ++
drivers/hid/hid-cp2112.c | 8 +-
drivers/hv/hv_fcopy.c | 4 -
drivers/hv/hv_kvp.c | 4 -
drivers/hv/hv_snapshot.c | 4 -
drivers/hv/hv_utils_transport.c | 12 +-
drivers/hv/hv_utils_transport.h | 1 +
drivers/hwtracing/intel_th/pci.c | 5 +
drivers/infiniband/core/cma.c | 11 +-
drivers/infiniband/hw/cxgb4/t4.h | 2 +-
drivers/infiniband/hw/hfi1/chip.c | 2 +-
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 +-
drivers/input/serio/i8042-x86ia64io.h | 7 +
drivers/iommu/amd_iommu.c | 2 +-
drivers/iommu/io-pgtable-arm-v7s.c | 6 +-
drivers/iommu/mtk_iommu_v1.c | 2 +-
drivers/irqchip/Kconfig | 1 +
drivers/md/bcache/request.c | 6 +-
drivers/md/bcache/super.c | 6 +-
drivers/md/md-cluster.c | 1 +
drivers/md/raid5.c | 5 +-
drivers/mfd/fsl-imx25-tsadc.c | 14 ++
drivers/misc/eeprom/at24.c | 2 +-
drivers/mmc/host/mtk-sd.c | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 168 +++++++++++++++-------
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 16 ++-
drivers/net/ethernet/mellanox/mlx4/cmd.c | 11 ++
drivers/net/ethernet/mellanox/mlx4/main.c | 11 ++
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 +-
drivers/net/ethernet/mellanox/mlxsw/reg.h | 4 +-
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 3 +-
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 11 +-
drivers/net/ethernet/sfc/ef10.c | 2 +-
drivers/net/fjes/fjes_main.c | 2 +-
drivers/net/macvlan.c | 2 +-
drivers/net/ppp/ppp_generic.c | 1 +
drivers/net/wimax/i2400m/usb.c | 3 +
drivers/net/wireless/ath/ath9k/tx99.c | 5 +
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +-
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 11 +-
drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 41 +++---
drivers/nvme/host/core.c | 3 +-
drivers/nvme/target/core.c | 11 +-
drivers/nvme/target/loop.c | 2 +-
drivers/nvme/target/nvmet.h | 1 +
drivers/nvme/target/rdma.c | 8 +-
drivers/pci/pcie/pme.c | 5 +-
drivers/pci/probe.c | 7 +-
drivers/pci/remove.c | 2 +-
drivers/pinctrl/Kconfig | 3 +-
drivers/platform/x86/hp_accel.c | 1 +
drivers/platform/x86/intel_punit_ipc.c | 8 +-
drivers/platform/x86/sony-laptop.c | 14 +-
drivers/rtc/rtc-pcf8563.c | 2 +-
drivers/scsi/bfa/bfad_debugfs.c | 5 +-
drivers/scsi/hpsa.c | 59 ++++----
drivers/scsi/hpsa.h | 1 +
drivers/scsi/hpsa_cmd.h | 2 +
drivers/scsi/scsi_debug.c | 6 +-
drivers/scsi/scsi_devinfo.c | 2 +-
drivers/scsi/sd.c | 12 +-
drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +-
drivers/staging/rtl8188eu/core/rtw_cmd.c | 4 +-
drivers/staging/vt6655/device_main.c | 3 +-
drivers/target/iscsi/iscsi_target.c | 3 +-
drivers/target/iscsi/iscsi_target_configfs.c | 3 +-
drivers/target/target_core_alua.c | 33 ++---
drivers/target/target_core_file.c | 4 +
drivers/target/target_core_pr.c | 4 +-
drivers/thermal/step_wise.c | 11 +-
drivers/tty/tty_ldisc.c | 92 +++---------
drivers/usb/core/config.c | 4 +-
drivers/usb/host/xhci-mem.c | 15 +-
drivers/usb/host/xhci-mtk.c | 6 +-
drivers/usb/host/xhci-ring.c | 6 +-
drivers/usb/musb/da8xx.c | 10 +-
drivers/usb/phy/phy-isp1301.c | 7 +
drivers/usb/storage/unusual_devs.h | 7 +
drivers/usb/storage/unusual_uas.h | 7 +
drivers/usb/usbip/stub_rx.c | 51 +++++--
drivers/usb/usbip/stub_tx.c | 7 +
drivers/video/fbdev/au1200fb.c | 7 +-
drivers/video/fbdev/controlfb.h | 2 +
drivers/video/fbdev/udlfb.c | 10 +-
fs/afs/callback.c | 7 +-
fs/afs/cmservice.c | 11 +-
fs/afs/file.c | 1 +
fs/afs/fsclient.c | 22 +--
fs/afs/inode.c | 11 +-
fs/afs/internal.h | 17 ++-
fs/afs/misc.c | 2 +
fs/afs/rxrpc.c | 52 ++++---
fs/afs/security.c | 7 +-
fs/afs/server.c | 6 +-
fs/afs/vlocation.c | 16 ++-
fs/afs/write.c | 32 ++++-
fs/autofs4/waitq.c | 1 -
fs/btrfs/inode.c | 14 ++
fs/btrfs/tests/free-space-tree-tests.c | 3 +-
fs/ceph/mds_client.c | 42 +++++-
fs/ext4/extents.c | 1 +
fs/ext4/namei.c | 4 +
fs/fs-writeback.c | 35 +++--
fs/gfs2/file.c | 4 +-
fs/nfs/nfs4client.c | 4 +-
fs/nfs/write.c | 2 +
fs/nfsd/nfssvc.c | 30 ++--
fs/proc/proc_tty.c | 3 +-
fs/udf/super.c | 2 +-
fs/userfaultfd.c | 2 +-
fs/xfs/libxfs/xfs_bmap.c | 2 +-
fs/xfs/xfs_iops.c | 36 ++---
fs/xfs/xfs_log_recover.c | 2 +-
include/crypto/internal/hash.h | 8 ++
include/linux/acpi.h | 3 -
include/linux/mlx4/device.h | 1 +
include/linux/mman.h | 3 +-
include/rdma/ib_addr.h | 7 +-
include/rdma/ib_pack.h | 19 +--
include/target/target_core_base.h | 2 +-
include/uapi/linux/usb/ch9.h | 19 +++
kernel/sched/deadline.c | 63 +++++++-
kernel/sched/rt.c | 8 +-
kernel/trace/trace.c | 29 ++--
net/bridge/br_netfilter_hooks.c | 12 +-
net/core/dev.c | 1 +
net/ipv4/icmp.c | 15 +-
net/l2tp/l2tp_core.c | 2 +-
net/l2tp/l2tp_netlink.c | 2 +-
net/mac80211/mesh.c | 2 -
net/mpls/af_mpls.c | 13 +-
net/netfilter/ipvs/ip_vs_ctl.c | 4 +
net/rxrpc/conn_event.c | 4 +
net/rxrpc/input.c | 15 +-
net/socket.c | 1 +
sound/soc/intel/skylake/skl-sst-utils.c | 15 +-
sound/soc/sh/rcar/cmd.c | 36 ++---
sound/soc/sh/rcar/dma.c | 18 ++-
sound/soc/sh/rcar/ssi.c | 11 +-
tools/perf/util/symbol.c | 2 +-
tools/testing/selftests/vm/Makefile | 4 +
181 files changed, 1131 insertions(+), 699 deletions(-)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Kaiser <[email protected]>
commit 18f77393796848e68909e65d692c1d1436f06e06 upstream.
When fsl-imx25-tsadc is compiled as a module, loading, unloading and
reloading the module will lead to a crash.
Unable to handle kernel paging request at virtual address bf005430
[<c004df6c>] (irq_find_matching_fwspec)
from [<c028d5ec>] (of_irq_get+0x58/0x74)
[<c028d594>] (of_irq_get)
from [<c01ff970>] (platform_get_irq+0x48/0xc8)
[<c01ff928>] (platform_get_irq)
from [<bf00e33c>] (mx25_tsadc_probe+0x220/0x2f4 [fsl_imx25_tsadc])
irq_find_matching_fwspec() loops over all registered irq domains. The
irq domain is still registered from last time the module was loaded but
the pointer to its operations is invalid after the module was unloaded.
Add a removal function which clears the irq handler and removes the irq
domain. With this cleanup in place, it's possible to unload and reload
the module.
Signed-off-by: Martin Kaiser <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mfd/fsl-imx25-tsadc.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/mfd/fsl-imx25-tsadc.c
+++ b/drivers/mfd/fsl-imx25-tsadc.c
@@ -183,6 +183,19 @@ static int mx25_tsadc_probe(struct platf
return 0;
}
+static int mx25_tsadc_remove(struct platform_device *pdev)
+{
+ struct mx25_tsadc *tsadc = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (irq) {
+ irq_set_chained_handler_and_data(irq, NULL, NULL);
+ irq_domain_remove(tsadc->domain);
+ }
+
+ return 0;
+}
+
static const struct of_device_id mx25_tsadc_ids[] = {
{ .compatible = "fsl,imx25-tsadc" },
{ /* Sentinel */ }
@@ -194,6 +207,7 @@ static struct platform_driver mx25_tsadc
.of_match_table = of_match_ptr(mx25_tsadc_ids),
},
.probe = mx25_tsadc_probe,
+ .remove = mx25_tsadc_remove,
};
module_platform_driver(mx25_tsadc_driver);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan <[email protected]>
commit c6688ef9f29762e65bce325ef4acd6c675806366 upstream.
Harden CMD_SUBMIT path to handle malicious input that could trigger
large memory allocations. Add checks to validate transfer_buffer_length
and number_of_packets to protect against bad input requesting for
unbounded memory allocations. Validate early in get_pipe() and return
failure.
Reported-by: Secunia Research <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub_rx.c | 35 +++++++++++++++++++++++++++++++----
1 file changed, 31 insertions(+), 4 deletions(-)
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -336,11 +336,13 @@ static struct stub_priv *stub_priv_alloc
return priv;
}
-static int get_pipe(struct stub_device *sdev, int epnum, int dir)
+static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu)
{
struct usb_device *udev = sdev->udev;
struct usb_host_endpoint *ep;
struct usb_endpoint_descriptor *epd = NULL;
+ int epnum = pdu->base.ep;
+ int dir = pdu->base.direction;
if (epnum < 0 || epnum > 15)
goto err_ret;
@@ -353,6 +355,15 @@ static int get_pipe(struct stub_device *
goto err_ret;
epd = &ep->desc;
+
+ /* validate transfer_buffer_length */
+ if (pdu->u.cmd_submit.transfer_buffer_length > INT_MAX) {
+ dev_err(&sdev->udev->dev,
+ "CMD_SUBMIT: -EMSGSIZE transfer_buffer_length %d\n",
+ pdu->u.cmd_submit.transfer_buffer_length);
+ return -1;
+ }
+
if (usb_endpoint_xfer_control(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndctrlpipe(udev, epnum);
@@ -375,6 +386,21 @@ static int get_pipe(struct stub_device *
}
if (usb_endpoint_xfer_isoc(epd)) {
+ /* validate packet size and number of packets */
+ unsigned int maxp, packets, bytes;
+
+ maxp = usb_endpoint_maxp(epd);
+ maxp *= usb_endpoint_maxp_mult(epd);
+ bytes = pdu->u.cmd_submit.transfer_buffer_length;
+ packets = DIV_ROUND_UP(bytes, maxp);
+
+ if (pdu->u.cmd_submit.number_of_packets < 0 ||
+ pdu->u.cmd_submit.number_of_packets > packets) {
+ dev_err(&sdev->udev->dev,
+ "CMD_SUBMIT: isoc invalid num packets %d\n",
+ pdu->u.cmd_submit.number_of_packets);
+ return -1;
+ }
if (dir == USBIP_DIR_OUT)
return usb_sndisocpipe(udev, epnum);
else
@@ -383,7 +409,7 @@ static int get_pipe(struct stub_device *
err_ret:
/* NOT REACHED */
- dev_err(&sdev->udev->dev, "get pipe() invalid epnum %d\n", epnum);
+ dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum);
return -1;
}
@@ -448,7 +474,7 @@ static void stub_recv_cmd_submit(struct
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
struct usb_device *udev = sdev->udev;
- int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);
+ int pipe = get_pipe(sdev, pdu);
if (pipe == -1)
return;
@@ -470,7 +496,8 @@ static void stub_recv_cmd_submit(struct
}
/* allocate urb transfer buffer, if needed */
- if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
+ if (pdu->u.cmd_submit.transfer_buffer_length > 0 &&
+ pdu->u.cmd_submit.transfer_buffer_length <= INT_MAX) {
priv->urb->transfer_buffer =
kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
GFP_KERNEL);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit 040d786032bf59002d374b86d75b04d97624005c upstream.
Negative child dentry holds reference on inode's alias, it makes
d_prune_aliases() do nothing.
Signed-off-by: "Yan, Zheng" <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/mds_client.c | 42 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 38 insertions(+), 4 deletions(-)
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1396,6 +1396,29 @@ static int __close_session(struct ceph_m
return request_close_session(mdsc, session);
}
+static bool drop_negative_children(struct dentry *dentry)
+{
+ struct dentry *child;
+ bool all_negative = true;
+
+ if (!d_is_dir(dentry))
+ goto out;
+
+ spin_lock(&dentry->d_lock);
+ list_for_each_entry(child, &dentry->d_subdirs, d_child) {
+ if (d_really_is_positive(child)) {
+ all_negative = false;
+ break;
+ }
+ }
+ spin_unlock(&dentry->d_lock);
+
+ if (all_negative)
+ shrink_dcache_parent(dentry);
+out:
+ return all_negative;
+}
+
/*
* Trim old(er) caps.
*
@@ -1441,16 +1464,27 @@ static int trim_caps_cb(struct inode *in
if ((used | wanted) & ~oissued & mine)
goto out; /* we need these caps */
- session->s_trim_caps--;
if (oissued) {
/* we aren't the only cap.. just remove us */
__ceph_remove_cap(cap, true);
+ session->s_trim_caps--;
} else {
+ struct dentry *dentry;
/* try dropping referring dentries */
spin_unlock(&ci->i_ceph_lock);
- d_prune_aliases(inode);
- dout("trim_caps_cb %p cap %p pruned, count now %d\n",
- inode, cap, atomic_read(&inode->i_count));
+ dentry = d_find_any_alias(inode);
+ if (dentry && drop_negative_children(dentry)) {
+ int count;
+ dput(dentry);
+ d_prune_aliases(inode);
+ count = atomic_read(&inode->i_count);
+ if (count == 1)
+ session->s_trim_caps--;
+ dout("trim_caps_cb %p cap %p pruned, count now %d\n",
+ inode, cap, count);
+ } else {
+ dput(dentry);
+ }
return 0;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sukumar Ghorai <[email protected]>
commit a0085f2510e8976614ad8f766b209448b385492f upstream.
BT-Controller connected as platform non-root-hub device and
usb-driver initialize such device with wakeup disabled,
Ref. usb_new_device().
At present wakeup-capability get enabled by hid-input device from usb
function driver(e.g. BT HID device) at runtime. Again some functional
driver does not set usb-wakeup capability(e.g LE HID device implement
as HID-over-GATT), and can't wakeup the host on USB.
Most of the device operation (such as mass storage) initiated from host
(except HID) and USB wakeup aligned with host resume procedure. For BT
device, usb-wakeup capability need to enable form btusc driver as a
generic solution for multiple profile use case and required for USB remote
wakeup (in-bus wakeup) while host is suspended. Also usb-wakeup feature
need to enable/disable with HCI interface up and down.
Signed-off-by: Sukumar Ghorai <[email protected]>
Signed-off-by: Amit K Bag <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Cc: Matthias Kaehlcke <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btusb.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1059,6 +1059,10 @@ static int btusb_open(struct hci_dev *hd
}
data->intf->needs_remote_wakeup = 1;
+ /* device specific wakeup source enabled and required for USB
+ * remote wakeup while host is suspended
+ */
+ device_wakeup_enable(&data->udev->dev);
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
goto done;
@@ -1122,6 +1126,7 @@ static int btusb_close(struct hci_dev *h
goto failed;
data->intf->needs_remote_wakeup = 0;
+ device_wakeup_disable(&data->udev->dev);
usb_autopm_put_interface(data->intf);
failed:
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt <[email protected]>
commit f73c52a5bcd1710994e53fbccc378c42b97a06b6 upstream.
Daniel Wagner reported a crash on the BeagleBone Black SoC.
This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.
As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.
Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.
Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.
Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: Daniel Wagner <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: linux-rt-users <[email protected]>
Fixes: 4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/rt.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2022,8 +2022,9 @@ static void pull_rt_task(struct rq *this
bool resched = false;
struct task_struct *p;
struct rq *src_rq;
+ int rt_overload_count = rt_overloaded(this_rq);
- if (likely(!rt_overloaded(this_rq)))
+ if (likely(!rt_overload_count))
return;
/*
@@ -2032,6 +2033,11 @@ static void pull_rt_task(struct rq *this
*/
smp_rmb();
+ /* If we are the only overloaded CPU do nothing */
+ if (rt_overload_count == 1 &&
+ cpumask_test_cpu(this_rq->cpu, this_rq->rd->rto_mask))
+ return;
+
#ifdef HAVE_RT_PUSH_IPI
if (sched_feat(RT_PUSH_IPI)) {
tell_cpu_to_push(this_rq);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Mayhew <[email protected]>
commit dc4fd9ab01ab379ae5af522b3efd4187a7c30a31 upstream.
If there were no commit requests, then nfs_commit_inode() should not
wait on the commit or mark the inode dirty, otherwise the following
BUG_ON can be triggered:
[ 1917.130762] kernel BUG at fs/inode.c:578!
[ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1]
[ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries
[ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G ------------ T 3.10.0-768.el7.ppc64 #1
[ 1917.130810] task: c0000005ecd88040 ti: c00000004cea0000 task.ti: c00000004cea0000
[ 1917.130813] NIP: c000000000354178 LR: c000000000354160 CTR: c00000000012db80
[ 1917.130816] REGS: c00000004cea3720 TRAP: 0700 Tainted: G ------------ T (3.10.0-768.el7.ppc64)
[ 1917.130820] MSR: 8000000100029032 <SF,EE,ME,IR,DR,RI> CR: 22002822 XER: 20000000
[ 1917.130828] CFAR: c00000000011f594 SOFTE: 1
GPR00: c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750
GPR04: 000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03
GPR08: 0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8
GPR12: c00000000012db80 c000000007b31200 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0
GPR28: d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8
[ 1917.130867] NIP [c000000000354178] .evict+0x1c8/0x350
[ 1917.130871] LR [c000000000354160] .evict+0x1b0/0x350
[ 1917.130873] Call Trace:
[ 1917.130876] [c00000004cea39a0] [c000000000354160] .evict+0x1b0/0x350 (unreliable)
[ 1917.130880] [c00000004cea3a30] [c0000000003558cc] .evict_inodes+0x13c/0x270
[ 1917.130884] [c00000004cea3af0] [c000000000327d20] .kill_anon_super+0x70/0x1e0
[ 1917.130896] [c00000004cea3b80] [d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs]
[ 1917.130900] [c00000004cea3c00] [c000000000328a20] .deactivate_locked_super+0xa0/0x1b0
[ 1917.130903] [c00000004cea3c80] [c00000000035ba54] .cleanup_mnt+0xd4/0x180
[ 1917.130907] [c00000004cea3d10] [c000000000119034] .task_work_run+0x114/0x150
[ 1917.130912] [c00000004cea3db0] [c00000000001ba6c] .do_notify_resume+0xcc/0x100
[ 1917.130916] [c00000004cea3e30] [c00000000000a7b0] .ret_from_except_lite+0x5c/0x60
[ 1917.130919] Instruction dump:
[ 1917.130921] 7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0
[ 1917.130927] 694a0060 7d4a0074 794ad182 694a0001 <0b0a0000> 892d02a4 2f890000 40de0134
Signed-off-by: Scott Mayhew <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/write.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1859,6 +1859,8 @@ int nfs_commit_inode(struct inode *inode
if (res)
error = nfs_generic_commit_list(inode, &head, how, &cinfo);
nfs_commit_end(cinfo.mds);
+ if (res == 0)
+ return res;
if (error < 0)
goto out_error;
if (!may_wait)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Lechner <[email protected]>
commit 7f6d2ecd3d7acaf205ea7b3e96f9ffc55b92298b upstream.
Trying to read the MAC address from an eeprom that has an offset that
is not a multiple of 4 causes an error currently.
Fix it by changing the nvmem stride to 1.
Signed-off-by: David Lechner <[email protected]>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/eeprom/at24.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -783,7 +783,7 @@ static int at24_probe(struct i2c_client
at24->nvmem_config.reg_read = at24_read;
at24->nvmem_config.reg_write = at24_write;
at24->nvmem_config.priv = at24;
- at24->nvmem_config.stride = 4;
+ at24->nvmem_config.stride = 1;
at24->nvmem_config.word_size = 1;
at24->nvmem_config.size = chip.byte_len;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eryu Guan <[email protected]>
commit c894aa97577e47d3066b27b32499ecf899bfa8b0 upstream.
Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2)
then crash, we'll see wrong allocated block number (stat -c %b), the
blocks allocated beyond EOF are all lost. fstests generic/468
exposes this bug.
Commit 67a7d5f561f4 ("ext4: fix fdatasync(2) after extent
manipulation operations") fixed all the other extent manipulation
operation paths such as hole punch, zero range, collapse range etc.,
but forgot the fallocate case.
So similarly, fix it by recording the correct journal tid in ext4
inode in fallocate(2) path, so that ext4_sync_file() will wait for
the right tid to be committed on fdatasync(2).
This addresses the test failure in xfstests test generic/468.
Signed-off-by: Eryu Guan <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/extents.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4731,6 +4731,7 @@ retry:
EXT4_INODE_EOFBLOCKS);
}
ext4_mark_inode_dirty(handle, inode);
+ ext4_update_inode_fsync_trans(handle, inode, 1);
ret2 = ext4_journal_stop(handle);
if (ret2)
break;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Martinez Canillas <[email protected]>
[ Upstream commit fd567653bdb908009b650f079bfd4b63169e2ac4 ]
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/phy/phy-isp1301.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -33,6 +33,12 @@ static const struct i2c_device_id isp130
};
MODULE_DEVICE_TABLE(i2c, isp1301_id);
+static const struct of_device_id isp1301_of_match[] = {
+ {.compatible = "nxp,isp1301" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
static struct i2c_client *isp1301_i2c_client;
static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_cli
static struct i2c_driver isp1301_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = of_match_ptr(isp1301_of_match),
},
.probe = isp1301_probe,
.remove = isp1301_remove,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chunfeng Yun <[email protected]>
[ Upstream commit 94a631d91ad341b3b4bdac72d1104d9f090e0ca9 ]
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(),
so checks the Maximum Primary Stream Array Size in the hcc_params
register after adding primary hcd.
Signed-off-by: Chunfeng Yun <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mtk.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -632,13 +632,13 @@ static int xhci_mtk_probe(struct platfor
goto power_off_phys;
}
- if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
- xhci->shared_hcd->can_do_streams = 1;
-
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto put_usb3_hcd;
+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ xhci->shared_hcd->can_do_streams = 1;
+
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto dealloc_usb2_hcd;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Arcangeli <[email protected]>
[ Upstream commit 6bbc4a4144b1a69743022ac68dfaf6e7d993abb9 ]
__do_fault assumes vmf->page has been initialized and is valid if
VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf).
handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't
return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities).
This VM_FAULT_NOPAGE case is only invoked when signal are pending and it
didn't matter for anonymous memory before. It only started to matter
since shmem was introduced. hugetlbfs also takes a different path and
doesn't exercise __do_fault.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrea Arcangeli <[email protected]>
Reported-by: Dmitry Vyukov <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/userfaultfd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -419,7 +419,7 @@ int handle_userfault(struct fault_env *f
* in such case.
*/
down_read(&mm->mmap_sem);
- ret = 0;
+ ret = VM_FAULT_NOPAGE;
}
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Potapenko <[email protected]>
[ Upstream commit 9f138fa609c47403374a862a08a41394be53d461 ]
KMSAN reports a use of uninitialized memory in put_cmsg() because
msg.msg_flags in recvfrom haven't been initialized properly.
The flag values don't affect the result on this path, but it's still a
good idea to initialize them explicitly.
Signed-off-by: Alexander Potapenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/socket.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/socket.c
+++ b/net/socket.c
@@ -1702,6 +1702,7 @@ SYSCALL_DEFINE6(recvfrom, int, fd, void
/* We assume all kernel code knows the size of sockaddr_storage */
msg.msg_namelen = 0;
msg.msg_iocb = NULL;
+ msg.msg_flags = 0;
if (sock->file->f_flags & O_NONBLOCK)
flags |= MSG_DONTWAIT;
err = sock_recvmsg(sock, &msg, flags);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit 1ad3d225e5a40ca6c586989b4baaca710544c15a ]
The gap between the Tx status counters and the Rx RUNT counters is now
being added to allow correct reporting of the registers.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -876,13 +876,16 @@ static void bcmgenet_update_mib_counters
case BCMGENET_STAT_NETDEV:
case BCMGENET_STAT_SOFT:
continue;
- case BCMGENET_STAT_MIB_RX:
- case BCMGENET_STAT_MIB_TX:
case BCMGENET_STAT_RUNT:
- if (s->type != BCMGENET_STAT_MIB_RX)
- offset = BCMGENET_STAT_OFFSET;
+ offset += BCMGENET_STAT_OFFSET;
+ /* fall through */
+ case BCMGENET_STAT_MIB_TX:
+ offset += BCMGENET_STAT_OFFSET;
+ /* fall through */
+ case BCMGENET_STAT_MIB_RX:
val = bcmgenet_umac_readl(priv,
UMAC_MIB_START + j + offset);
+ offset = 0; /* Reset Offset */
break;
case BCMGENET_STAT_MISC:
if (GENET_IS_V1(priv)) {
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 302ec300ef8a545a7fc7f667e5fd743b091c2eeb upstream.
Commit ecc0c469f277 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ecc0c469f277 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Cc: Ian Kent <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/autofs4/waitq.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -176,7 +176,6 @@ static void autofs4_notify_daemon(struct
mutex_unlock(&sbi->wq_mutex);
- if (autofs4_write(sbi, pipe, &pkt, pktsz))
switch (ret = autofs4_write(sbi, pipe, &pkt, pktsz)) {
case 0:
break;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Kozub <[email protected]>
commit 62354454625741f0569c2cbe45b2d192f8fd258e upstream.
There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails
with the following error:
[sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[sda] tag#0 Sense Key : Illegal Request [current]
[sda] tag#0 Add. Sense: Invalid field in cdb
The issue occurs both with UAS (occasionally) and mass storage
(immediately after mounting a FS on a disk in the enclosure).
Enabling US_FL_BROKEN_FUA quirk solves this issue.
This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure
for both UAS and mass storage.
Signed-off-by: David Kozub <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
drivers/usb/storage/unusual_uas.h | 7 +++++++
2 files changed, 14 insertions(+)
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2113,6 +2113,13 @@ UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA ),
+/* Reported by David Kozub <[email protected]> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA),
+
/*
* Reported by Alexandre Oliva <[email protected]>
* JMicron responds to USN and several other SCSI ioctls with a
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -142,6 +142,13 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x99
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES),
+/* Reported-by: David Kozub <[email protected]> */
+UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
+ "JMicron",
+ "JMS567",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA),
+
/* Reported-by: Hans de Goede <[email protected]> */
UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
"VIA",
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan <[email protected]>
commit 635f545a7e8be7596b9b2b6a43cab6bbd5a88e43 upstream.
get_pipe() routine doesn't validate the input endpoint number
and uses to reference ep_in and ep_out arrays. Invalid endpoint
number can trigger BUG(). Range check the epnum and returning
error instead of calling BUG().
Change caller stub_recv_cmd_submit() to handle the get_pipe()
error return.
Reported-by: Secunia Research <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub_rx.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -342,15 +342,15 @@ static int get_pipe(struct stub_device *
struct usb_host_endpoint *ep;
struct usb_endpoint_descriptor *epd = NULL;
+ if (epnum < 0 || epnum > 15)
+ goto err_ret;
+
if (dir == USBIP_DIR_IN)
ep = udev->ep_in[epnum & 0x7f];
else
ep = udev->ep_out[epnum & 0x7f];
- if (!ep) {
- dev_err(&sdev->udev->dev, "no such endpoint?, %d\n",
- epnum);
- BUG();
- }
+ if (!ep)
+ goto err_ret;
epd = &ep->desc;
if (usb_endpoint_xfer_control(epd)) {
@@ -381,9 +381,10 @@ static int get_pipe(struct stub_device *
return usb_rcvisocpipe(udev, epnum);
}
+err_ret:
/* NOT REACHED */
- dev_err(&sdev->udev->dev, "get pipe, epnum %d\n", epnum);
- return 0;
+ dev_err(&sdev->udev->dev, "get pipe() invalid epnum %d\n", epnum);
+ return -1;
}
static void masking_bogus_flags(struct urb *urb)
@@ -449,6 +450,9 @@ static void stub_recv_cmd_submit(struct
struct usb_device *udev = sdev->udev;
int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);
+ if (pipe == -1)
+ return;
+
priv = stub_priv_alloc(sdev, pdu);
if (!priv)
return;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 9fa1d7537242bd580ffa99c4725a0407096aad26 ]
omap_gem_dmabuf_mmap() returns an error (with a WARN) when called for a
buffer which is allocated with dma_alloc_*(). This prevents dmabuf mmap
from working on SoCs without DMM, e.g. AM4 and OMAP3.
I could not find any reason for omap_gem_dmabuf_mmap() rejecting such
buffers, and just removing the if() fixes the limitation.
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c
+++ b/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c
@@ -147,9 +147,6 @@ static int omap_gem_dmabuf_mmap(struct d
struct drm_gem_object *obj = buffer->priv;
int ret = 0;
- if (WARN_ON(!obj->filp))
- return -EINVAL;
-
ret = drm_gem_mmap_obj(obj, omap_gem_mmap_size(obj), vma);
if (ret < 0)
return ret;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <[email protected]>
[ Upstream commit 0067d4b020ea07a58540acb2c5fcd3364bf326e0 ]
In case cpu was unplugged, we need to make sure not to assume
that the tags for that cpu are still allocated. so check
for null tags when reinitializing a tagset.
Reported-by: Yi Zhang <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-mq-tag.c | 3 +++
1 file changed, 3 insertions(+)
--- a/block/blk-mq-tag.c
+++ b/block/blk-mq-tag.c
@@ -311,6 +311,9 @@ int blk_mq_reinit_tagset(struct blk_mq_t
for (i = 0; i < set->nr_hw_queues; i++) {
struct blk_mq_tags *tags = set->tags[i];
+ if (!tags)
+ continue;
+
for (j = 0; j < tags->nr_tags; j++) {
if (!tags->rqs[j])
continue;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Kaehlcke <[email protected]>
[ Upstream commit 23f963e91fd81f44f6b316b1c24db563354c6be8 ]
This fixes the following warning when building with clang and
CONFIG_DMA_ENGINE_RAID=n :
drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
return &unmap_pool[2];
^ ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
^
drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
return &unmap_pool[3];
^ ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
Signed-off-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/dmaengine.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -1107,12 +1107,14 @@ static struct dmaengine_unmap_pool *__ge
switch (order) {
case 0 ... 1:
return &unmap_pool[0];
+#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID)
case 2 ... 4:
return &unmap_pool[1];
case 5 ... 7:
return &unmap_pool[2];
case 8:
return &unmap_pool[3];
+#endif
default:
BUG();
return NULL;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Pirko <[email protected]>
[ Upstream commit f004ec065b4879d6bc9ba0211af2169b3ce3097f ]
The num_rec field is 8 bit, so the maximal count number is 255. This
fixes vlans not being enabled for wider ranges than 255.
Fixes: b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -788,7 +788,7 @@ static inline void mlxsw_reg_spvid_pack(
#define MLXSW_REG_SPVM_ID 0x200F
#define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */
#define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */
-#define MLXSW_REG_SPVM_REC_MAX_COUNT 256
+#define MLXSW_REG_SPVM_REC_MAX_COUNT 255
#define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN + \
MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ram Amrani <[email protected]>
[ Upstream commit f3e48119b97f56fb09310c95d49da122a27003d7 ]
The Doorbell HW block can be configured at a granularity
of 16 x CIDs, so we need to make sure that the actual number
of CIDs configured would be a multiplication of 16.
Today, when RoCE is enabled - given that the number is unaligned,
doorbelling the higher CIDs would fail to reach the firmware and
would eventually timeout.
Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols")
Signed-off-by: Ram Amrani <[email protected]>
Signed-off-by: Yuval Mintz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -373,8 +373,9 @@ static void qed_cxt_set_proto_cid_count(
u32 page_sz = p_mgr->clients[ILT_CLI_CDUC].p_size.val;
u32 cxt_size = CONN_CXT_SIZE(p_hwfn);
u32 elems_per_page = ILT_PAGE_IN_BYTES(page_sz) / cxt_size;
+ u32 align = elems_per_page * DQ_RANGE_ALIGN;
- p_conn->cid_count = roundup(p_conn->cid_count, elems_per_page);
+ p_conn->cid_count = roundup(p_conn->cid_count, align);
}
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Yasevich <[email protected]>
[ Upstream commit 37c343b4f4e70e9dc328ab04903c0ec8d154c1a4 ]
When we notify peers of potential changes, it's also good to update
IGMP memberships. For example, during VM migration, updating IGMP
memberships will redirect existing multicast streams to the VM at the
new location.
Signed-off-by: Vladislav Yasevich <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1304,6 +1304,7 @@ void netdev_notify_peers(struct net_devi
{
rtnl_lock();
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev);
+ call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev);
rtnl_unlock();
}
EXPORT_SYMBOL(netdev_notify_peers);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 702f2ac87a9a8da23bf8506466bc70175fc970b2 ]
The RxRPC ACK packet may contain an extension that includes the peer's
current Rx window size for this call. We adjust the local Tx window size
to match. However, the transmitter can stall if the receive window is
reduced to 0 by the peer and then reopened.
This is because the normal way that the transmitter is re-energised is by
dropping something out of our Tx queue and thus making space. When a
single gap is made, the transmitter is woken up. However, because there's
nothing in the Tx queue at this point, this doesn't happen.
To fix this, perform a wake_up() any time we see the peer's Rx window size
increasing.
The observable symptom is that calls start failing on ETIMEDOUT and the
following:
kAFS: SERVER DEAD state=-62
appears in dmesg.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/input.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -649,6 +649,7 @@ static void rxrpc_input_ackinfo(struct r
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
struct rxrpc_peer *peer;
unsigned int mtu;
+ bool wake = false;
u32 rwind = ntohl(ackinfo->rwind);
_proto("Rx ACK %%%u Info { rx=%u max=%u rwin=%u jm=%u }",
@@ -656,9 +657,14 @@ static void rxrpc_input_ackinfo(struct r
ntohl(ackinfo->rxMTU), ntohl(ackinfo->maxMTU),
rwind, ntohl(ackinfo->jumbo_max));
- if (rwind > RXRPC_RXTX_BUFF_SIZE - 1)
- rwind = RXRPC_RXTX_BUFF_SIZE - 1;
- call->tx_winsize = rwind;
+ if (call->tx_winsize != rwind) {
+ if (rwind > RXRPC_RXTX_BUFF_SIZE - 1)
+ rwind = RXRPC_RXTX_BUFF_SIZE - 1;
+ if (rwind > call->tx_winsize)
+ wake = true;
+ call->tx_winsize = rwind;
+ }
+
if (call->cong_ssthresh > rwind)
call->cong_ssthresh = rwind;
@@ -672,6 +678,9 @@ static void rxrpc_input_ackinfo(struct r
spin_unlock_bh(&peer->lock);
_net("Net MTU %u (maxdata %u)", peer->mtu, peer->maxdata);
}
+
+ if (wake)
+ wake_up(&call->waitq);
}
/*
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Taku Izumi <[email protected]>
[ Upstream commit fe8daf5fa715f7214952f06a387e4b7de818c5be ]
This patch fixes netdev->features for Extended Socket network device.
Currently Extended Socket network device's netdev->feature claims
NETIF_F_HW_CSUM, however this is completely wrong. There's no feature
of checksum offloading.
That causes invalid TCP/UDP checksum and packet rejection when IP
forwarding from Extended Socket network device to other network device.
NETIF_F_HW_CSUM should be omitted.
Signed-off-by: Taku Izumi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/fjes/fjes_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1277,7 +1277,7 @@ static void fjes_netdev_setup(struct net
fjes_set_ethtool_ops(netdev);
netdev->mtu = fjes_support_mtu[3];
netdev->flags |= IFF_BROADCAST;
- netdev->features |= NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_CTAG_FILTER;
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
}
static void fjes_irq_watch_task(struct work_struct *work)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vitaly Kuznetsov <[email protected]>
[ Upstream commit e9c18ae6eb2b312f16c63e34b43ea23926daa398 ]
Waiting for release_event in all three drivers introduced issues on release
as on_reset() hook is not always called. E.g. if the device was never
opened we will never get the completion.
Move the waiting code to hvutil_transport_destroy() and make sure it is
only called when the device is open. hvt->lock serialization should
guarantee the absence of races.
Fixes: 5a66fecbf6aa ("Drivers: hv: util: kvp: Fix a rescind processing issue")
Fixes: 20951c7535b5 ("Drivers: hv: util: Fcopy: Fix a rescind processing issue")
Fixes: d77044d142e9 ("Drivers: hv: util: Backup: Fix a rescind processing issue")
Reported-by: Dexuan Cui <[email protected]>
Tested-by: Dexuan Cui <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hv/hv_fcopy.c | 4 ----
drivers/hv/hv_kvp.c | 4 ----
drivers/hv/hv_snapshot.c | 4 ----
drivers/hv/hv_utils_transport.c | 12 ++++++++----
drivers/hv/hv_utils_transport.h | 1 +
5 files changed, 9 insertions(+), 16 deletions(-)
--- a/drivers/hv/hv_fcopy.c
+++ b/drivers/hv/hv_fcopy.c
@@ -61,7 +61,6 @@ static DECLARE_WORK(fcopy_send_work, fco
static const char fcopy_devname[] = "vmbus/hv_fcopy";
static u8 *recv_buffer;
static struct hvutil_transport *hvt;
-static struct completion release_event;
/*
* This state maintains the version number registered by the daemon.
*/
@@ -322,7 +321,6 @@ static void fcopy_on_reset(void)
if (cancel_delayed_work_sync(&fcopy_timeout_work))
fcopy_respond_to_host(HV_E_FAIL);
- complete(&release_event);
}
int hv_fcopy_init(struct hv_util_service *srv)
@@ -330,7 +328,6 @@ int hv_fcopy_init(struct hv_util_service
recv_buffer = srv->recv_buffer;
fcopy_transaction.recv_channel = srv->channel;
- init_completion(&release_event);
/*
* When this driver loads, the user level daemon that
* processes the host requests may not yet be running.
@@ -352,5 +349,4 @@ void hv_fcopy_deinit(void)
fcopy_transaction.state = HVUTIL_DEVICE_DYING;
cancel_delayed_work_sync(&fcopy_timeout_work);
hvutil_transport_destroy(hvt);
- wait_for_completion(&release_event);
}
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -88,7 +88,6 @@ static DECLARE_WORK(kvp_sendkey_work, kv
static const char kvp_devname[] = "vmbus/hv_kvp";
static u8 *recv_buffer;
static struct hvutil_transport *hvt;
-static struct completion release_event;
/*
* Register the kernel component with the user-level daemon.
* As part of this registration, pass the LIC version number.
@@ -717,7 +716,6 @@ static void kvp_on_reset(void)
if (cancel_delayed_work_sync(&kvp_timeout_work))
kvp_respond_to_host(NULL, HV_E_FAIL);
kvp_transaction.state = HVUTIL_DEVICE_INIT;
- complete(&release_event);
}
int
@@ -726,7 +724,6 @@ hv_kvp_init(struct hv_util_service *srv)
recv_buffer = srv->recv_buffer;
kvp_transaction.recv_channel = srv->channel;
- init_completion(&release_event);
/*
* When this driver loads, the user level daemon that
* processes the host requests may not yet be running.
@@ -750,5 +747,4 @@ void hv_kvp_deinit(void)
cancel_delayed_work_sync(&kvp_timeout_work);
cancel_work_sync(&kvp_sendkey_work);
hvutil_transport_destroy(hvt);
- wait_for_completion(&release_event);
}
--- a/drivers/hv/hv_snapshot.c
+++ b/drivers/hv/hv_snapshot.c
@@ -66,7 +66,6 @@ static int dm_reg_value;
static const char vss_devname[] = "vmbus/hv_vss";
static __u8 *recv_buffer;
static struct hvutil_transport *hvt;
-static struct completion release_event;
static void vss_timeout_func(struct work_struct *dummy);
static void vss_handle_request(struct work_struct *dummy);
@@ -331,13 +330,11 @@ static void vss_on_reset(void)
if (cancel_delayed_work_sync(&vss_timeout_work))
vss_respond_to_host(HV_E_FAIL);
vss_transaction.state = HVUTIL_DEVICE_INIT;
- complete(&release_event);
}
int
hv_vss_init(struct hv_util_service *srv)
{
- init_completion(&release_event);
if (vmbus_proto_version < VERSION_WIN8_1) {
pr_warn("Integration service 'Backup (volume snapshot)'"
" not supported on this host version.\n");
@@ -368,5 +365,4 @@ void hv_vss_deinit(void)
cancel_delayed_work_sync(&vss_timeout_work);
cancel_work_sync(&vss_handle_request_work);
hvutil_transport_destroy(hvt);
- wait_for_completion(&release_event);
}
--- a/drivers/hv/hv_utils_transport.c
+++ b/drivers/hv/hv_utils_transport.c
@@ -182,10 +182,11 @@ static int hvt_op_release(struct inode *
* connects back.
*/
hvt_reset(hvt);
- mutex_unlock(&hvt->lock);
if (mode_old == HVUTIL_TRANSPORT_DESTROY)
- hvt_transport_free(hvt);
+ complete(&hvt->release);
+
+ mutex_unlock(&hvt->lock);
return 0;
}
@@ -304,6 +305,7 @@ struct hvutil_transport *hvutil_transpor
init_waitqueue_head(&hvt->outmsg_q);
mutex_init(&hvt->lock);
+ init_completion(&hvt->release);
spin_lock(&hvt_list_lock);
list_add(&hvt->list, &hvt_list);
@@ -351,6 +353,8 @@ void hvutil_transport_destroy(struct hvu
if (hvt->cn_id.idx > 0 && hvt->cn_id.val > 0)
cn_del_callback(&hvt->cn_id);
- if (mode_old != HVUTIL_TRANSPORT_CHARDEV)
- hvt_transport_free(hvt);
+ if (mode_old == HVUTIL_TRANSPORT_CHARDEV)
+ wait_for_completion(&hvt->release);
+
+ hvt_transport_free(hvt);
}
--- a/drivers/hv/hv_utils_transport.h
+++ b/drivers/hv/hv_utils_transport.h
@@ -41,6 +41,7 @@ struct hvutil_transport {
int outmsg_len; /* its length */
wait_queue_head_t outmsg_q; /* poll/read wait queue */
struct mutex lock; /* protects struct members */
+ struct completion release; /* synchronize with fd release */
};
struct hvutil_transport *hvutil_transport_init(const char *name,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Bristot de Oliveira <[email protected]>
[ Upstream commit 5ac69d37784b237707a7b15d199cdb6c6fdb6780 ]
Currently, the replenishment timer is set to fire at the deadline
of a task. Although that works for implicit deadline tasks because the
deadline is equals to the begin of the next period, that is not correct
for constrained deadline tasks (deadline < period).
For instance:
f.c:
--------------- %< ---------------
int main (void)
{
for(;;);
}
--------------- >% ---------------
# gcc -o f f.c
# trace-cmd record -e sched:sched_switch \
-e syscalls:sys_exit_sched_setattr \
chrt -d --sched-runtime 490000000 \
--sched-deadline 500000000 \
--sched-period 1000000000 0 ./f
# trace-cmd report | grep "{pid of ./f}"
After setting parameters, the task is replenished and continue running
until being throttled:
f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0
The task is throttled after running 492318 ms, as expected:
f-11295 [003] 13322.606094: sched_switch: f:11295 [-1] R ==> watchdog/3:32 [0]
But then, the task is replenished 500719 ms after the first
replenishment:
<idle>-0 [003] 13322.614495: sched_switch: swapper/3:0 [120] R ==> f:11295 [-1]
Running for 490277 ms:
f-11295 [003] 13323.104772: sched_switch: f:11295 [-1] R ==> swapper/3:0 [120]
Hence, in the first period, the task runs 2 * runtime, and that is a bug.
During the first replenishment, the next deadline is set one period away.
So the runtime / period starts to be respected. However, as the second
replenishment took place in the wrong instant, the next replenishment
will also be held in a wrong instant of time. Rather than occurring in
the nth period away from the first activation, it is taking place
in the (nth period - relative deadline).
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Luca Abeni <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Reviewed-by: Juri Lelli <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Romulo Silva de Oliveira <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tommaso Cucinotta <[email protected]>
Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/deadline.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -505,10 +505,15 @@ static void update_dl_entity(struct sche
}
}
+static inline u64 dl_next_period(struct sched_dl_entity *dl_se)
+{
+ return dl_se->deadline - dl_se->dl_deadline + dl_se->dl_period;
+}
+
/*
* If the entity depleted all its runtime, and if we want it to sleep
* while waiting for some new execution time to become available, we
- * set the bandwidth enforcement timer to the replenishment instant
+ * set the bandwidth replenishment timer to the replenishment instant
* and try to activate it.
*
* Notice that it is important for the caller to know if the timer
@@ -530,7 +535,7 @@ static int start_dl_timer(struct task_st
* that it is actually coming from rq->clock and not from
* hrtimer's time base reading.
*/
- act = ns_to_ktime(dl_se->deadline);
+ act = ns_to_ktime(dl_next_period(dl_se));
now = hrtimer_cb_get_time(timer);
delta = ktime_to_ns(now) - rq_clock(rq);
act = ktime_add_ns(act, delta);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wanpeng Li <[email protected]>
[ Upstream commit dcc3b5ffe1b32771c9a22e2c916fb94c4fcf5b79 ]
The following warning can be triggered by hot-unplugging the CPU
on which an active SCHED_DEADLINE task is running on:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/sched.h:833 replenish_dl_entity+0x71e/0xc40
rq->clock_update_flags < RQCF_ACT_SKIP
CPU: 7 PID: 0 Comm: swapper/7 Tainted: G B 4.11.0-rc1+ #24
Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
Call Trace:
<IRQ>
dump_stack+0x85/0xc4
__warn+0x172/0x1b0
warn_slowpath_fmt+0xb4/0xf0
? __warn+0x1b0/0x1b0
? debug_check_no_locks_freed+0x2c0/0x2c0
? cpudl_set+0x3d/0x2b0
replenish_dl_entity+0x71e/0xc40
enqueue_task_dl+0x2ea/0x12e0
? dl_task_timer+0x777/0x990
? __hrtimer_run_queues+0x270/0xa50
dl_task_timer+0x316/0x990
? enqueue_task_dl+0x12e0/0x12e0
? enqueue_task_dl+0x12e0/0x12e0
__hrtimer_run_queues+0x270/0xa50
? hrtimer_cancel+0x20/0x20
? hrtimer_interrupt+0x119/0x600
hrtimer_interrupt+0x19c/0x600
? trace_hardirqs_off+0xd/0x10
local_apic_timer_interrupt+0x74/0xe0
smp_apic_timer_interrupt+0x76/0xa0
apic_timer_interrupt+0x93/0xa0
The DL task will be migrated to a suitable later deadline rq once the DL
timer fires and currnet rq is offline. The rq clock of the new rq should
be updated. This patch fixes it by updating the rq clock after holding
the new rq's rq lock.
Signed-off-by: Wanpeng Li <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/deadline.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -638,6 +638,7 @@ static enum hrtimer_restart dl_task_time
lockdep_unpin_lock(&rq->lock, rf.cookie);
rq = dl_task_offline_migration(rq, p);
rf.cookie = lockdep_pin_lock(&rq->lock);
+ update_rq_clock(rq);
/*
* Now that the task has been migrated to the new RQ and we
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Blakey <[email protected]>
[ Upstream commit af36370569eb37420e1e78a2e60c277b781fcd00 ]
The autogroups list is a list of non overlapping group boundaries
sorted by their start index. If the autogroups list wasn't empty
and an empty group slot was found at the start of the list,
the new group was added to the end of the list instead of the
beginning, as the prev initializer was incorrect.
When this was repeated, it caused multiple groups to have
overlapping boundaries.
Fixed that by correctly initializing the prev pointer to the
start of the list.
Fixes: eccec8da3b4e ('net/mlx5: Keep autogroups list ordered')
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1015,7 +1015,7 @@ static struct mlx5_flow_group *create_au
u32 *match_criteria)
{
int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in);
- struct list_head *prev = ft->node.children.prev;
+ struct list_head *prev = &ft->node.children;
unsigned int candidate_index = 0;
struct mlx5_flow_group *fg;
void *match_criteria_addr;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 928c6fb3a9bfd6c5b287aa3465226add551c13c0 ]
Current code will return 1 if the version is supported,
and -1 if it isn't.
This is confusing and inconsistent with the one place where this
is used.
So change to return 1 if it is supported, and zero if not.
i.e. an error is never returned.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfssvc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -155,7 +155,8 @@ int nfsd_vers(int vers, enum vers_op cha
int nfsd_minorversion(u32 minorversion, enum vers_op change)
{
- if (minorversion > NFSD_SUPPORTED_MINOR_VERSION)
+ if (minorversion > NFSD_SUPPORTED_MINOR_VERSION &&
+ change != NFSD_AVAIL)
return -1;
switch(change) {
case NFSD_SET:
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: yong mao <[email protected]>
[ Upstream commit 40ceda09c8c84694c2ca6b00bcc6dc71e8e62d96 ]
This patch can fix two issues:
Issue 1:
In previous code, div may be overflow when setting clock frequency
as f_min. We can use DIV_ROUND_UP to fix this boundary related
issue.
Issue 2:
In previous code, we can not set the correct clock frequency when
div equals 0xff.
Signed-off-by: Yong Mao <[email protected]>
Signed-off-by: Chaotian Jing <[email protected]>
Reviewed-by: Daniel Kurtz <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -579,7 +579,7 @@ static void msdc_set_mclk(struct msdc_ho
}
}
sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
- (mode << 8) | (div % 0xff));
+ (mode << 8) | div);
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
@@ -1562,7 +1562,7 @@ static int msdc_drv_probe(struct platfor
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
mmc->ops = &mt_msdc_ops;
- mmc->f_min = host->src_clk_freq / (4 * 255);
+ mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
/* MMC core transfer sizes tunable parameters */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 146a1192783697810b63a1e41c4d59fc93387340 ]
afs_fs_store_data() works out of the size of the write it's going to make,
but it uses 32-bit unsigned subtraction in one place that gets
automatically cast to loff_t.
However, if to < offset, then the number goes negative, but as the result
isn't signed, this doesn't get sign-extended to 64-bits when placed in a
loff_t.
Fix by casting the operands to loff_t.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/fsclient.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -1178,7 +1178,7 @@ int afs_fs_store_data(struct afs_server
_enter(",%x,{%x:%u},,",
key_serial(wb->key), vnode->fid.vid, vnode->fid.vnode);
- size = to - offset;
+ size = (loff_t)to - (loff_t)offset;
if (first != last)
size += (loff_t)(last - first) << PAGE_SHIFT;
pos = (loff_t)first << PAGE_SHIFT;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 70af0e3bd65142f9e674961c975451638a7ce1d5 ]
If we receive a network error, a remote abort or a protocol error whilst
we're still transmitting data, make sure we return an appropriate error to
the caller rather than ESHUTDOWN or ECONNABORTED.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/rxrpc.c | 35 +++++++++++++++++++++++++++--------
1 file changed, 27 insertions(+), 8 deletions(-)
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -321,6 +321,8 @@ int afs_make_call(struct in_addr *addr,
struct rxrpc_call *rxcall;
struct msghdr msg;
struct kvec iov[1];
+ size_t offset;
+ u32 abort_code;
int ret;
_enter("%x,{%d},", addr->s_addr, ntohs(call->port));
@@ -368,9 +370,11 @@ int afs_make_call(struct in_addr *addr,
msg.msg_controllen = 0;
msg.msg_flags = (call->send_pages ? MSG_MORE : 0);
- /* have to change the state *before* sending the last packet as RxRPC
- * might give us the reply before it returns from sending the
- * request */
+ /* We have to change the state *before* sending the last packet as
+ * rxrpc might give us the reply before it returns from sending the
+ * request. Further, if the send fails, we may already have been given
+ * a notification and may have collected it.
+ */
if (!call->send_pages)
call->state = AFS_CALL_AWAIT_REPLY;
ret = rxrpc_kernel_send_data(afs_socket, rxcall,
@@ -389,7 +393,17 @@ int afs_make_call(struct in_addr *addr,
return wait_mode->wait(call);
error_do_abort:
- rxrpc_kernel_abort_call(afs_socket, rxcall, RX_USER_ABORT, -ret, "KSD");
+ call->state = AFS_CALL_COMPLETE;
+ if (ret != -ECONNABORTED) {
+ rxrpc_kernel_abort_call(afs_socket, rxcall, RX_USER_ABORT,
+ -ret, "KSD");
+ } else {
+ abort_code = 0;
+ offset = 0;
+ rxrpc_kernel_recv_data(afs_socket, rxcall, NULL, 0, &offset,
+ false, &abort_code);
+ ret = call->type->abort_to_error(abort_code);
+ }
error_kill_call:
afs_end_call(call);
_leave(" = %d", ret);
@@ -434,16 +448,18 @@ static void afs_deliver_to_call(struct a
case -EINPROGRESS:
case -EAGAIN:
goto out;
+ case -ECONNABORTED:
+ goto call_complete;
case -ENOTCONN:
abort_code = RX_CALL_DEAD;
rxrpc_kernel_abort_call(afs_socket, call->rxcall,
abort_code, -ret, "KNC");
- goto do_abort;
+ goto save_error;
case -ENOTSUPP:
abort_code = RXGEN_OPCODE;
rxrpc_kernel_abort_call(afs_socket, call->rxcall,
abort_code, -ret, "KIV");
- goto do_abort;
+ goto save_error;
case -ENODATA:
case -EBADMSG:
case -EMSGSIZE:
@@ -453,7 +469,7 @@ static void afs_deliver_to_call(struct a
abort_code = RXGEN_SS_UNMARSHAL;
rxrpc_kernel_abort_call(afs_socket, call->rxcall,
abort_code, EBADMSG, "KUM");
- goto do_abort;
+ goto save_error;
}
}
@@ -464,8 +480,9 @@ out:
_leave("");
return;
-do_abort:
+save_error:
call->error = ret;
+call_complete:
call->state = AFS_CALL_COMPLETE;
goto done;
}
@@ -513,6 +530,8 @@ static int afs_wait_for_call_to_complete
_debug("call incomplete");
rxrpc_kernel_abort_call(afs_socket, call->rxcall,
RX_CALL_DEAD, -ret, abort_why);
+ } else if (call->error < 0) {
+ ret = call->error;
}
_debug("call complete");
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 7286a35e893176169b09715096a4aca557e2ccd2 ]
Fix afs_kill_pages() in two ways:
(1) If a writeback has been partially flushed, then if we try and kill the
pages it contains, some of them may no longer be undergoing writeback
and end_page_writeback() will assert.
Fix this by checking to see whether the page in question is actually
undergoing writeback before ending that writeback.
(2) The loop that scans for pages to kill doesn't increase the first page
index, and so the loop may not terminate, but it will try to process
the same pages over and over again.
Fix this by increasing the first page index to one after the last page
we processed.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/write.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -299,10 +299,14 @@ static void afs_kill_pages(struct afs_vn
ASSERTCMP(pv.nr, ==, count);
for (loop = 0; loop < count; loop++) {
- ClearPageUptodate(pv.pages[loop]);
+ struct page *page = pv.pages[loop];
+ ClearPageUptodate(page);
if (error)
- SetPageError(pv.pages[loop]);
- end_page_writeback(pv.pages[loop]);
+ SetPageError(page);
+ if (PageWriteback(page))
+ end_page_writeback(page);
+ if (page->index >= first)
+ first = page->index + 1;
}
__pagevec_release(&pv);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 954cd6dc02a65065aecb7150962c0870c5b0e322 ]
Fix the way in which a call that's in progress and being waited for is
aborted in the case that EINTR is detected. We should be sending
RX_USER_ABORT rather than RX_CALL_DEAD as the abort code.
Note that since the only two ways out of the loop are if the call completes
or if a signal happens, the kill-the-call clause after the loop has
finished can only happen in the case of EINTR. This means that we only
have one abort case to deal with, not two, and the "KWC" case can never
happen and so can be deleted.
Note further that simply aborting the call isn't necessarily the best thing
here since at this point: the request has been entirely sent and it's
likely the server will do the operation anyway - whether we abort it or
not. In future, we should punt the handling of the remainder of the call
off to a background thread.
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/rxrpc.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -492,7 +492,6 @@ call_complete:
*/
static int afs_wait_for_call_to_complete(struct afs_call *call)
{
- const char *abort_why;
int ret;
DECLARE_WAITQUEUE(myself, current);
@@ -511,13 +510,8 @@ static int afs_wait_for_call_to_complete
continue;
}
- abort_why = "KWC";
- ret = call->error;
- if (call->state == AFS_CALL_COMPLETE)
- break;
- abort_why = "KWI";
- ret = -EINTR;
- if (signal_pending(current))
+ if (call->state == AFS_CALL_COMPLETE ||
+ signal_pending(current))
break;
schedule();
}
@@ -525,15 +519,14 @@ static int afs_wait_for_call_to_complete
remove_wait_queue(&call->waitq, &myself);
__set_current_state(TASK_RUNNING);
- /* kill the call */
+ /* Kill off the call if it's still live. */
if (call->state < AFS_CALL_COMPLETE) {
- _debug("call incomplete");
+ _debug("call interrupted");
rxrpc_kernel_abort_call(afs_socket, call->rxcall,
- RX_CALL_DEAD, -ret, abort_why);
- } else if (call->error < 0) {
- ret = call->error;
+ RX_USER_ABORT, -EINTR, "KWI");
}
+ ret = call->error;
_debug("call complete");
afs_end_call(call);
_leave(" = %d", ret);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <[email protected]>
[ Upstream commit e4c5d3762e2d6d274bd1cc948c47063becfa2103 ]
we need to destroy the nvmet sq and let it finish gracefully
before continue to cleanup the queue.
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/target/loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -288,9 +288,9 @@ static struct blk_mq_ops nvme_loop_admin
static void nvme_loop_destroy_admin_queue(struct nvme_loop_ctrl *ctrl)
{
+ nvmet_sq_destroy(&ctrl->queues[0].nvme_sq);
blk_cleanup_queue(ctrl->ctrl.admin_q);
blk_mq_free_tag_set(&ctrl->admin_tag_set);
- nvmet_sq_destroy(&ctrl->queues[0].nvme_sq);
}
static void nvme_loop_free_ctrl(struct nvme_ctrl *nctrl)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit 61733c91c454a61be0ffc93fe46a5d5f2f048c1c ]
Alive tracking of nexthops can account for a link twice if the carrier
goes down followed by an admin down of the same link rendering multipath
routes useless. This is similar to 79099aab38c8 for UNREGISTER events and
DOWN events.
Fix by tracking number of alive nexthops in mpls_ifdown similar to the
logic in mpls_ifup. Checking the flags per nexthop once after all events
have been processed is simpler than trying to maintian a running count
through all event combinations.
Also, WRITE_ONCE is used instead of ACCESS_ONCE to set rt_nhn_alive
per a comment from checkpatch:
WARNING: Prefer WRITE_ONCE(<FOO>, <BAR>) over ACCESS_ONCE(<FOO>) = <BAR>
Fixes: c89359a42e2a4 ("mpls: support for dead routes")
Signed-off-by: David Ahern <[email protected]>
Acked-by: Robert Shearman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mpls/af_mpls.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -937,6 +937,8 @@ static void mpls_ifdown(struct net_devic
{
struct mpls_route __rcu **platform_label;
struct net *net = dev_net(dev);
+ unsigned int nh_flags = RTNH_F_DEAD | RTNH_F_LINKDOWN;
+ unsigned int alive;
unsigned index;
platform_label = rtnl_dereference(net->mpls.platform_label);
@@ -946,9 +948,11 @@ static void mpls_ifdown(struct net_devic
if (!rt)
continue;
+ alive = 0;
change_nexthops(rt) {
if (rtnl_dereference(nh->nh_dev) != dev)
- continue;
+ goto next;
+
switch (event) {
case NETDEV_DOWN:
case NETDEV_UNREGISTER:
@@ -956,13 +960,16 @@ static void mpls_ifdown(struct net_devic
/* fall through */
case NETDEV_CHANGE:
nh->nh_flags |= RTNH_F_LINKDOWN;
- if (event != NETDEV_UNREGISTER)
- ACCESS_ONCE(rt->rt_nhn_alive) = rt->rt_nhn_alive - 1;
break;
}
if (event == NETDEV_UNREGISTER)
RCU_INIT_POINTER(nh->nh_dev, NULL);
+next:
+ if (!(nh->nh_flags & nh_flags))
+ alive++;
} endfor_nexthops(rt);
+
+ WRITE_ONCE(rt->rt_nhn_alive, alive);
}
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
[ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ]
The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:
i) If the symbol has a start address (f.e. exposed via kallsyms)
that is at a page boundary, then the roundup(curr->start, 4096)
for the last entry will result in curr->start == curr->end with
a symbol length of zero.
ii) If the symbol has a start address that is shortly before a page
boundary, then also here, curr->end - curr->start will just be
very few bytes, where it's unrealistic that we could perform a
match against.
Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.
Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.
Reported-and-Tested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/symbol.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -202,7 +202,7 @@ void symbols__fixup_end(struct rb_root *
/* Last entry */
if (curr->end == curr->start)
- curr->end = roundup(curr->start, 4096);
+ curr->end = roundup(curr->start, 4096) + 4096;
}
void __map_groups__fixup_end(struct map_groups *mg, enum map_type type)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <[email protected]>
[ Upstream commit 207ee84133c00a8a2a5bdec94df4a5b37d78881c ]
If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.
Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.
For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_alua.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1118,13 +1118,11 @@ static int core_alua_do_transition_tg_pt
unsigned long transition_tmo;
transition_tmo = tg_pt_gp->tg_pt_gp_implicit_trans_secs * HZ;
- queue_delayed_work(tg_pt_gp->tg_pt_gp_dev->tmr_wq,
- &tg_pt_gp->tg_pt_gp_transition_work,
- transition_tmo);
+ schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work,
+ transition_tmo);
} else {
tg_pt_gp->tg_pt_gp_transition_complete = &wait;
- queue_delayed_work(tg_pt_gp->tg_pt_gp_dev->tmr_wq,
- &tg_pt_gp->tg_pt_gp_transition_work, 0);
+ schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work, 0);
wait_for_completion(&wait);
tg_pt_gp->tg_pt_gp_transition_complete = NULL;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 033853325fe3bdc70819a8b97915bd3bca41d3af ]
Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4client.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -1004,9 +1004,9 @@ static void nfs4_session_set_rwsize(stru
server_resp_sz = sess->fc_attrs.max_resp_sz - nfs41_maxread_overhead;
server_rqst_sz = sess->fc_attrs.max_rqst_sz - nfs41_maxwrite_overhead;
- if (server->rsize > server_resp_sz)
+ if (!server->rsize || server->rsize > server_resp_sz)
server->rsize = server_resp_sz;
- if (server->wsize > server_rqst_sz)
+ if (!server->wsize || server->wsize > server_rqst_sz)
server->wsize = server_rqst_sz;
#endif /* CONFIG_NFS_V4_1 */
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <[email protected]>
[ Upstream commit 760bf578edf8122f2503a3a6a3f4b0de3b6ce0bb ]
This fixes the following races:
1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:
if (!explicit &&
atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
ALUA_ACCESS_STATE_TRANSITION) {
and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.
2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.
To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.
Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_alua.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1073,16 +1073,8 @@ static int core_alua_do_transition_tg_pt
/*
* Flush any pending transitions
*/
- if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
- ALUA_ACCESS_STATE_TRANSITION) {
- /* Just in case */
- tg_pt_gp->tg_pt_gp_alua_pending_state = new_state;
- tg_pt_gp->tg_pt_gp_transition_complete = &wait;
+ if (!explicit)
flush_work(&tg_pt_gp->tg_pt_gp_transition_work);
- wait_for_completion(&wait);
- tg_pt_gp->tg_pt_gp_transition_complete = NULL;
- return 0;
- }
/*
* Save the old primary ALUA access state, and set the current state
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robert Stonehouse <[email protected]>
[ Upstream commit cbad52e92ad7f01f0be4ca58bde59462dc1afe3a ]
Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address")
Signed-off-by: Bert Kenward <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/sfc/ef10.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -4967,7 +4967,7 @@ static int efx_ef10_set_mac_address(stru
* MCFW do not support VFs.
*/
rc = efx_ef10_vport_set_mac_address(efx);
- } else {
+ } else if (rc) {
efx_mcdi_display_error(efx, MC_CMD_VADAPTOR_SET_MAC,
sizeof(inbuf), NULL, 0, rc);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ladislav Michl <[email protected]>
[ Upstream commit c98769475575c8a585f5b3952f4b5f90266f699b ]
While usb_control_msg function expects timeout in miliseconds, a value
of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error
message which looks like:
udlfb: Read EDID byte 78 failed err ffffff92
as error is either negative errno or number of bytes transferred use %d
format specifier.
Returned EDID is in second byte, so return error when less than two bytes
are received.
Fixes: 18dffdf8913a ("staging: udlfb: enhance EDID and mode handling support")
Signed-off-by: Ladislav Michl <[email protected]>
Cc: Bernie Thompson <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/udlfb.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -769,11 +769,11 @@ static int dlfb_get_edid(struct dlfb_dat
for (i = 0; i < len; i++) {
ret = usb_control_msg(dev->udev,
- usb_rcvctrlpipe(dev->udev, 0), (0x02),
- (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
- HZ);
- if (ret < 1) {
- pr_err("Read EDID byte %d failed err %x\n", i, ret);
+ usb_rcvctrlpipe(dev->udev, 0), 0x02,
+ (0x80 | (0x02 << 5)), i << 8, 0xA1,
+ rbuf, 2, USB_CTRL_GET_TIMEOUT);
+ if (ret < 2) {
+ pr_err("Read EDID byte %d failed: %d\n", i, ret);
i--;
break;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 451f130602619a17c8883dd0b71b11624faffd51 ]
We should go through the error handling code instead of returning -ENOMEM
directly.
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/au1200fb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -1700,7 +1700,8 @@ static int au1200fb_drv_probe(struct pla
if (!fbdev->fb_mem) {
print_err("fail to allocate frambuffer (size: %dK))",
fbdev->fb_len / 1024);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto failed;
}
/*
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 8cae353e6b01ac3f18097f631cdbceb5ff28c7f3 ]
'ret' is known to be 0 at this point.
In case of memory allocation error in 'framebuffer_alloc()', return
-ENOMEM instead.
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/au1200fb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -1681,8 +1681,10 @@ static int au1200fb_drv_probe(struct pla
fbi = framebuffer_alloc(sizeof(struct au1200fb_device),
&dev->dev);
- if (!fbi)
+ if (!fbi) {
+ ret = -ENOMEM;
goto failed;
+ }
_au1200fb_infos[plane] = fbi;
fbdev = fbi->par;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tina Ruchandani <[email protected]>
[ Upstream commit 56e714312e7dbd6bb83b2f78d3ec19a404c7649f ]
get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs_vnode record to use ktime_get_real_seconds() instead, for the
fields cb_expires and cb_expires_at.
Signed-off-by: Tina Ruchandani <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/fsclient.c | 2 +-
fs/afs/inode.c | 7 ++++---
fs/afs/internal.h | 4 ++--
3 files changed, 7 insertions(+), 6 deletions(-)
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -139,7 +139,7 @@ static void xdr_decode_AFSCallBack(const
vnode->cb_version = ntohl(*bp++);
vnode->cb_expiry = ntohl(*bp++);
vnode->cb_type = ntohl(*bp++);
- vnode->cb_expires = vnode->cb_expiry + get_seconds();
+ vnode->cb_expires = vnode->cb_expiry + ktime_get_real_seconds();
*_bp = bp;
}
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -245,12 +245,13 @@ struct inode *afs_iget(struct super_bloc
vnode->cb_version = 0;
vnode->cb_expiry = 0;
vnode->cb_type = 0;
- vnode->cb_expires = get_seconds();
+ vnode->cb_expires = ktime_get_real_seconds();
} else {
vnode->cb_version = cb->version;
vnode->cb_expiry = cb->expiry;
vnode->cb_type = cb->type;
- vnode->cb_expires = vnode->cb_expiry + get_seconds();
+ vnode->cb_expires = vnode->cb_expiry +
+ ktime_get_real_seconds();
}
}
@@ -323,7 +324,7 @@ int afs_validate(struct afs_vnode *vnode
!test_bit(AFS_VNODE_CB_BROKEN, &vnode->flags) &&
!test_bit(AFS_VNODE_MODIFIED, &vnode->flags) &&
!test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) {
- if (vnode->cb_expires < get_seconds() + 10) {
+ if (vnode->cb_expires < ktime_get_real_seconds() + 10) {
_debug("callback expired");
set_bit(AFS_VNODE_CB_BROKEN, &vnode->flags);
} else {
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -373,8 +373,8 @@ struct afs_vnode {
struct rb_node server_rb; /* link in server->fs_vnodes */
struct rb_node cb_promise; /* link in server->cb_promises */
struct work_struct cb_broken_work; /* work to be done on callback break */
- time_t cb_expires; /* time at which callback expires */
- time_t cb_expires_at; /* time used to order cb_promise */
+ time64_t cb_expires; /* time at which callback expires */
+ time64_t cb_expires_at; /* time used to order cb_promise */
unsigned cb_version; /* callback version */
unsigned cb_expiry; /* callback expiry time */
afs_callback_type_t cb_type; /* type of callback */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (VMware)" <[email protected]>
[ Upstream commit 2317d5f1c34913bac5971d93d69fb6c31bb74670 ]
I was testing Daniel's changes with his test case, and tweaked it a
little. Instead of having the runtime equal to the deadline, I
increased the deadline ten fold.
Daniel's test case had:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
To make it more interesting, I changed it to:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
The results were rather surprising. The behavior that Daniel's patch
was fixing came back. The task started using much more than .1% of the
CPU. More like 20%.
Looking into this I found that it was due to the dl_entity_overflow()
constantly returning true. That's because it uses the relative period
against relative runtime vs the absolute deadline against absolute
runtime.
runtime / (deadline - t) > dl_runtime / dl_period
There's even a comment mentioning this, and saying that when relative
deadline equals relative period, that the equation is the same as using
deadline instead of period. That comment is backwards! What we really
want is:
runtime / (deadline - t) > dl_runtime / dl_deadline
We care about if the runtime can make its deadline, not its period. And
then we can say "when the deadline equals the period, the equation is
the same as using dl_period instead of dl_deadline".
After correcting this, now when the task gets enqueued, it can throttle
correctly, and Daniel's fix to the throttling of sleeping deadline
tasks works even when the runtime and deadline are not the same.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Bristot de Oliveira <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Luca Abeni <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Romulo Silva de Oliveira <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tommaso Cucinotta <[email protected]>
Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/deadline.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -445,13 +445,13 @@ static void replenish_dl_entity(struct s
*
* This function returns true if:
*
- * runtime / (deadline - t) > dl_runtime / dl_period ,
+ * runtime / (deadline - t) > dl_runtime / dl_deadline ,
*
* IOW we can't recycle current parameters.
*
- * Notice that the bandwidth check is done against the period. For
+ * Notice that the bandwidth check is done against the deadline. For
* task with deadline equal to period this is the same of using
- * dl_deadline instead of dl_period in the equation above.
+ * dl_period instead of dl_deadline in the equation above.
*/
static bool dl_entity_overflow(struct sched_dl_entity *dl_se,
struct sched_dl_entity *pi_se, u64 t)
@@ -476,7 +476,7 @@ static bool dl_entity_overflow(struct sc
* of anything below microseconds resolution is actually fiction
* (but still we want to give the user that illusion >;).
*/
- left = (pi_se->dl_period >> DL_SCALE) * (dl_se->runtime >> DL_SCALE);
+ left = (pi_se->dl_deadline >> DL_SCALE) * (dl_se->runtime >> DL_SCALE);
right = ((dl_se->deadline - t) >> DL_SCALE) *
(pi_se->dl_runtime >> DL_SCALE);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuppuswamy Sathyanarayanan <[email protected]>
[ Upstream commit 6cc8cbbc8868033f279b63e98b26b75eaa0006ab ]
For PUNIT device, ISPDRIVER_IPC and GTDDRIVER_IPC resources are not
mandatory. So when PMC IPC driver creates a PUNIT device, if these
resources are not available then it creates dummy resource entries for
these missing resources. But during PUNIT device probe, doing ioremap on
these dummy resources generates following warning messages.
intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_punit_ipc: can't request region for resource [mem 0x00000000]
This patch fixes this issue by adding extra check for resource size
before performing ioremap operation.
Signed-off-by: Kuppuswamy Sathyanarayanan <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/intel_punit_ipc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/platform/x86/intel_punit_ipc.c
+++ b/drivers/platform/x86/intel_punit_ipc.c
@@ -252,28 +252,28 @@ static int intel_punit_get_bars(struct p
* - GTDRIVER_IPC BASE_IFACE
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- if (res) {
+ if (res && resource_size(res) > 1) {
addr = devm_ioremap_resource(&pdev->dev, res);
if (!IS_ERR(addr))
punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
- if (res) {
+ if (res && resource_size(res) > 1) {
addr = devm_ioremap_resource(&pdev->dev, res);
if (!IS_ERR(addr))
punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 4);
- if (res) {
+ if (res && resource_size(res) > 1) {
addr = devm_ioremap_resource(&pdev->dev, res);
if (!IS_ERR(addr))
punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 5);
- if (res) {
+ if (res && resource_size(res) > 1) {
addr = devm_ioremap_resource(&pdev->dev, res);
if (!IS_ERR(addr))
punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pankaj Bharadiya <[email protected]>
[ Upstream commit f8e066521192c7debe59127d90abbe2773577e25 ]
In the loop that adds the uuid_module to the uuid_list list, allocated
memory is not properly freed in the error path free uuid_list whenever
any of the memory allocation in the loop fails to avoid memory leak.
Signed-off-by: Pankaj Bharadiya <[email protected]>
Signed-off-by: Guneshwor Singh <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/skylake/skl-sst-utils.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/sound/soc/intel/skylake/skl-sst-utils.c
+++ b/sound/soc/intel/skylake/skl-sst-utils.c
@@ -295,6 +295,7 @@ int snd_skl_parse_uuids(struct sst_dsp *
struct uuid_module *module;
struct firmware stripped_fw;
unsigned int safe_file;
+ int ret = 0;
/* Get the FW pointer to derive ADSP header */
stripped_fw.data = fw->data;
@@ -343,8 +344,10 @@ int snd_skl_parse_uuids(struct sst_dsp *
for (i = 0; i < num_entry; i++, mod_entry++) {
module = kzalloc(sizeof(*module), GFP_KERNEL);
- if (!module)
- return -ENOMEM;
+ if (!module) {
+ ret = -ENOMEM;
+ goto free_uuid_list;
+ }
uuid_bin = (uuid_le *)mod_entry->uuid.id;
memcpy(&module->uuid, uuid_bin, sizeof(module->uuid));
@@ -355,8 +358,8 @@ int snd_skl_parse_uuids(struct sst_dsp *
size = sizeof(int) * mod_entry->instance_max_count;
module->instance_id = devm_kzalloc(ctx->dev, size, GFP_KERNEL);
if (!module->instance_id) {
- kfree(module);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto free_uuid_list;
}
list_add_tail(&module->list, &skl->uuid_list);
@@ -367,6 +370,10 @@ int snd_skl_parse_uuids(struct sst_dsp *
}
return 0;
+
+free_uuid_list:
+ skl_freeup_uuid_list(skl);
+ return ret;
}
void skl_freeup_uuid_list(struct skl_sst *ctx)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: tangwenji <[email protected]>
[ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ]
tpg must free when call core_tpg_register() return fail
Signed-off-by: tangwenji <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_configfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -1144,7 +1144,7 @@ static struct se_portal_group *lio_targe
ret = core_tpg_register(wwn, &tpg->tpg_se_tpg, SCSI_PROTOCOL_ISCSI);
if (ret < 0)
- return NULL;
+ goto free_out;
ret = iscsit_tpg_add_portal_group(tiqn, tpg);
if (ret != 0)
@@ -1156,6 +1156,7 @@ static struct se_portal_group *lio_targe
return &tpg->tpg_se_tpg;
out:
core_tpg_deregister(&tpg->tpg_se_tpg);
+free_out:
kfree(tpg);
return NULL;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gary R Hook <[email protected]>
[ Upstream commit b92b4fb5c14257c0e7eae291ecc1f7b1962e1699 ]
The extent of pages specified when applying a reserved region should
include up to the last page of the range, but not the page following
the range.
Signed-off-by: Gary R Hook <[email protected]>
Fixes: 8d54d6c8b8f3 ('iommu/amd: Implement apply_dm_region call-back')
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/amd_iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3211,7 +3211,7 @@ static void amd_iommu_apply_dm_region(st
unsigned long start, end;
start = IOVA_PFN(region->start);
- end = IOVA_PFN(region->start + region->length);
+ end = IOVA_PFN(region->start + region->length - 1);
WARN_ON_ONCE(reserve_iova(&dma_dom->iovad, start, end) == NULL);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Zhong <[email protected]>
[ Upstream commit c955bf3998efa3355790a4d8c82874582f1bc727 ]
Since the previous setup always sets the PLL using crystal 26MHz, this
doesn't always happen in every MediaTek platform. So the patch added
flexibility for assigning extra member for determining the PLL source
clock.
Signed-off-by: Chen Zhong <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/mediatek/clk-mtk.h | 1 +
drivers/clk/mediatek/clk-pll.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -185,6 +185,7 @@ struct mtk_pll_data {
uint32_t pcw_reg;
int pcw_shift;
const struct mtk_pll_div_table *div_table;
+ const char *parent_name;
};
void mtk_clk_register_plls(struct device_node *node,
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -302,7 +302,10 @@ static struct clk *mtk_clk_register_pll(
init.name = data->name;
init.ops = &mtk_pll_ops;
- init.parent_names = &parent_name;
+ if (data->parent_name)
+ init.parent_names = &data->parent_name;
+ else
+ init.parent_names = &parent_name;
init.num_parents = 1;
clk = clk_register(NULL, &pll->hw);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leo Yan <[email protected]>
[ Upstream commit d2a3671ebe6479483a12f94fcca63c058d95ad64 ]
Clock cs_atb_syspll is pll used for coresight trace bus; when clock
cs_atb_syspll is disabled and operates its child clock node cs_atb
results in system hang. So mark clock cs_atb_syspll as critical to
keep it enabled.
Cc: Guodong Xu <[email protected]>
Cc: Zhangfei Gao <[email protected]>
Cc: Haojian Zhuang <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Signed-off-by: Michael Turquette <[email protected]>
Link: lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/hisilicon/clk-hi6220.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/hisilicon/clk-hi6220.c
+++ b/drivers/clk/hisilicon/clk-hi6220.c
@@ -144,7 +144,7 @@ static struct hisi_gate_clock hi6220_sep
{ HI6220_BBPPLL_SEL, "bbppll_sel", "pll0_bbp_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 9, 0, },
{ HI6220_MEDIA_PLL_SRC, "media_pll_src", "pll_media_gate", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 10, 0, },
{ HI6220_MMC2_SEL, "mmc2_sel", "mmc2_mux1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 11, 0, },
- { HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 12, 0, },
+ { HI6220_CS_ATB_SYSPLL, "cs_atb_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IS_CRITICAL, 0x270, 12, 0, },
};
static struct hisi_mux_clock hi6220_mux_clks_sys[] __initdata = {
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuninori Morimoto <[email protected]>
[ Upstream commit 21781e87881f9c420871b1d1f3f29d4cd7bffb10 ]
SSI parent mod might be NULL. ssi_parent_mod() needs to care
about it. Otherwise, it uses negative shift.
This patch fixes it.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -172,10 +172,15 @@ static u32 rsnd_ssi_run_mods(struct rsnd
{
struct rsnd_mod *ssi_mod = rsnd_io_to_mod_ssi(io);
struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io);
+ u32 mods;
- return rsnd_ssi_multi_slaves_runtime(io) |
- 1 << rsnd_mod_id(ssi_mod) |
- 1 << rsnd_mod_id(ssi_parent_mod);
+ mods = rsnd_ssi_multi_slaves_runtime(io) |
+ 1 << rsnd_mod_id(ssi_mod);
+
+ if (ssi_parent_mod)
+ mods |= 1 << rsnd_mod_id(ssi_parent_mod);
+
+ return mods;
}
u32 rsnd_ssi_multi_slaves_runtime(struct rsnd_dai_stream *io)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Feng <[email protected]>
[ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ]
The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the
good readbility, it's better to invoke it in exit func when the init
func invokes mutex_init.
Signed-off-by: Gao Feng <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -958,6 +958,7 @@ static __net_exit void ppp_exit_net(stru
unregister_netdevice_many(&list);
rtnl_unlock();
+ mutex_destroy(&pn->all_ppp_mutex);
idr_destroy(&pn->units_idr);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bob Peterson <[email protected]>
[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]
This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.
The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.
Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:
filemap_fdatawrite() -> __filemap_fdatawrite_range()
__filemap_fdatawrite_range() -> do_writepages()
do_writepages() -> gfs2_jdata_writepages()
gfs2_jdata_writepages() -> gfs2_log_flush()
This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Acked-by: Abhijith Das <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -256,7 +256,7 @@ static int do_gfs2_set_flags(struct file
goto out;
}
if ((flags ^ new_flags) & GFS2_DIF_JDATA) {
- if (flags & GFS2_DIF_JDATA)
+ if (new_flags & GFS2_DIF_JDATA)
gfs2_log_flush(sdp, ip->i_gl, NORMAL_FLUSH);
error = filemap_fdatawrite(inode->i_mapping);
if (error)
@@ -264,6 +264,8 @@ static int do_gfs2_set_flags(struct file
error = filemap_fdatawait(inode->i_mapping);
if (error)
goto out;
+ if (new_flags & GFS2_DIF_JDATA)
+ gfs2_ordered_del_inode(ip);
}
error = gfs2_trans_begin(sdp, RES_DINODE, 0);
if (error)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patel Jay P <[email protected]>
[ Upstream commit 00f9203119dd2774564407c7a67b17d81916298b ]
__subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as
operational vls. hfi1_get_ib_cfg() returns vls_operational field in
hfi1_pportdata. The problem with this is that the value is always equal
to vls_supported field in hfi1_pportdata.
The logic to calculate operational_vls is to set value passed by FM
(in __subn_set_opa_portinfo routine). If no value is passed then
default value is stored in operational_vls.
Field actual_vls_operational is calculated on the basis of buffer
control table. Hence, modifying hfi1_get_ib_cfg() to return
actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter
Reviewed-by: Mike Marciniszyn <[email protected]>
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Patel Jay P <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hfi1/chip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -9769,7 +9769,7 @@ int hfi1_get_ib_cfg(struct hfi1_pportdat
goto unimplemented;
case HFI1_IB_CFG_OP_VLS:
- val = ppd->vls_operational;
+ val = ppd->actual_vls_operational;
break;
case HFI1_IB_CFG_VL_HIGH_CAP: /* VL arb high priority table size */
val = VL_ARB_HIGH_PRIO_TABLE_SIZE;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Slaby <[email protected]>
[ Upstream commit 4dc12ffeaeac939097a3f55c881d3dc3523dff0c ]
l2tp_tunnel_delete does not return anything since commit 62b982eeb458
("l2tp: fix race condition in l2tp_tunnel_delete"). But call sites of
l2tp_tunnel_delete still do casts to void to avoid unused return value
warnings.
Kill these now useless casts.
Signed-off-by: Jiri Slaby <[email protected]>
Cc: Sabrina Dubroca <[email protected]>
Cc: Guillaume Nault <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: [email protected]
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_core.c | 2 +-
net/l2tp/l2tp_netlink.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1944,7 +1944,7 @@ static __net_exit void l2tp_exit_net(str
rcu_read_lock_bh();
list_for_each_entry_rcu(tunnel, &pn->l2tp_tunnel_list, list) {
- (void)l2tp_tunnel_delete(tunnel);
+ l2tp_tunnel_delete(tunnel);
}
rcu_read_unlock_bh();
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -287,7 +287,7 @@ static int l2tp_nl_cmd_tunnel_delete(str
l2tp_tunnel_notify(&l2tp_nl_family, info,
tunnel, L2TP_CMD_TUNNEL_DELETE);
- (void) l2tp_tunnel_delete(tunnel);
+ l2tp_tunnel_delete(tunnel);
out:
return ret;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Osama Khan <[email protected]>
[ Upstream commit 163ca80013aafb6dc9cb295de3db7aeab9ab43f8 ]
Added support for HP ProBook 440 G4 laptops by including the accelerometer
orientation quirk for that device. Testing was performed based on the
axis orientation guidelines here:
https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d
which states "If the left side is elevated, X increases (becomes positive)".
When tested, on lifting the left edge, x values became increasingly negative
thus indicating an inverted x-axis on the installed lis3lv02d chip.
This was compensated by adding an entry for this device in hp_accel.c
specifying the quirk as x_inverted. The patch was tested on a
ProBook 440 G4 device and x-axis as well as y and z-axis values are now
generated as per spec.
Signed-off-by: Osama Khan <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/hp_accel.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv
AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd),
+ AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted),
AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shriya <[email protected]>
[ Upstream commit cd77b5ce208c153260ed7882d8910f2395bfaabd ]
The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which
returns the last frequency requested by the kernel, but may not
reflect the actual frequency the processor is running at. This patch
makes a call to cpufreq_get() instead which returns the current
frequency reported by the hardware.
Fixes: fb5153d05a7d ("powerpc: powernv: Implement ppc_md.get_proc_freq()")
Signed-off-by: Shriya <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/setup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -289,7 +289,7 @@ static unsigned long pnv_get_proc_freq(u
{
unsigned long ret_freq;
- ret_freq = cpufreq_quick_get(cpu) * 1000ul;
+ ret_freq = cpufreq_get(cpu) * 1000ul;
/*
* If the backend cpufreq driver does not exist,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg <[email protected]>
[ Upstream commit a20c7f36bd3d20d245616ae223bb9d05dfb6f050 ]
One can ask more buses to be reserved for hotplug bridges by passing
pci=hpbussize=N in the kernel command line. If the parent bus does not
have enough bus space available we incorrectly create child bus with the
requested number of subordinate buses.
In the example below hpbussize is set to one more than we have available
buses in the root port:
pci 0000:07:00.0: [8086:1578] type 01 class 0x060400
pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 0
pci 0000:07:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:07:00.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:08: busn_res: can not insert [bus 08-ff] under [bus 07-3f] (conflicts with (null) [bus 07-3f])
pci_bus 0000:08: scanning bus
...
pci_bus 0000:0a: bus scan returning with max=40
pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 40
pci_bus 0000:0a: [bus 0a-40] partially hidden behind bridge 0000:07 [bus 07-3f]
pci_bus 0000:08: bus scan returning with max=40
pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 40
Instead of allowing this, limit the subordinate number to be less than or
equal the maximum subordinate number allocated for the parent bus (if it
has any).
Signed-off-by: Mika Westerberg <[email protected]>
[bhelgaas: remove irrelevant dmesg messages]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/probe.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -932,7 +932,8 @@ int pci_scan_bridge(struct pci_bus *bus,
child = pci_add_new_bus(bus, dev, max+1);
if (!child)
goto out;
- pci_bus_insert_busn_res(child, max+1, 0xff);
+ pci_bus_insert_busn_res(child, max+1,
+ bus->busn_res.end);
}
max++;
buses = (buses & 0xff000000)
@@ -2136,6 +2137,10 @@ unsigned int pci_scan_child_bus(struct p
if (bus->self && bus->self->is_hotplug_bridge && pci_hotplug_bus_size) {
if (max - bus->busn_res.start < pci_hotplug_bus_size - 1)
max = bus->busn_res.start + pci_hotplug_bus_size - 1;
+
+ /* Do not allocate more buses than we have room left */
+ if (max > bus->busn_res.end)
+ max = bus->busn_res.end;
}
/*
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
[ Upstream commit 2dd4122854f697afc777582d18548dded03ce5dd ]
For kref_get_unless_zero to protect against lookup vs free races we need
to use it in all places where we aren't guaranteed to already hold a
reference. There is no such guarantee in nvme_find_get_ns, so switch to
kref_get_unless_zero in this function.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1619,7 +1619,8 @@ static struct nvme_ns *nvme_find_get_ns(
mutex_lock(&ctrl->namespaces_mutex);
list_for_each_entry(ns, &ctrl->namespaces, list) {
if (ns->ns_id == nsid) {
- kref_get(&ns->kref);
+ if (!kref_get_unless_zero(&ns->kref))
+ continue;
ret = ns;
break;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 9ca2e97fa3c3216200afe35a3b111ec51cc796d2 ]
If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tests/free-space-tree-tests.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/tests/free-space-tree-tests.c
+++ b/fs/btrfs/tests/free-space-tree-tests.c
@@ -501,7 +501,8 @@ static int run_test(test_func_t test_fun
path = btrfs_alloc_path();
if (!path) {
test_msg("Couldn't allocate path\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
ret = add_block_group_free_space(&trans, root->fs_info, cache);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nick Desaulniers <[email protected]>
[ Upstream commit fd9dde6abcb9bfe6c6bee48834e157999f113971 ]
Upon upgrading to binutils 2.27, we found that our lz4 and gzip
compressed kernel images were significantly larger, resulting is 10ms
boot time regressions.
As noted by Rahul:
"aarch64 binaries uses RELA relocations, where each relocation entry
includes an addend value. This is similar to x86_64. On x86_64, the
addend values are also stored at the relocation offset for relative
relocations. This is an optimization: in the case where code does not
need to be relocated, the loader can simply skip processing relative
relocations. In binutils-2.25, both bfd and gold linkers did this for
x86_64, but only the gold linker did this for aarch64. The kernel build
here is using the bfd linker, which stored zeroes at the relocation
offsets for relative relocations. Since a set of zeroes compresses
better than a set of non-zero addend values, this behavior was resulting
in much better lz4 compression.
The bfd linker in binutils-2.27 is now storing the actual addend values
at the relocation offsets. The behavior is now consistent with what it
does for x86_64 and what gold linker does for both architectures. The
change happened in this upstream commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=1f56df9d0d5ad89806c24e71f296576d82344613
Since a bunch of zeroes got replaced by non-zero addend values, we see
the side effect of lz4 compressed image being a bit bigger.
To get the old behavior from the bfd linker, "--no-apply-dynamic-relocs"
flag can be used:
$ LDFLAGS="--no-apply-dynamic-relocs" make
With this flag, the compressed image size is back to what it was with
binutils-2.25.
If the kernel is using ASLR, there aren't additional runtime costs to
--no-apply-dynamic-relocs, as the relocations will need to be applied
again anyway after the kernel is relocated to a random address.
If the kernel is not using ASLR, then presumably the current default
behavior of the linker is better. Since the static linker performed the
dynamic relocs, and the kernel is not moved to a different address at
load time, it can skip applying the relocations all over again."
Some measurements:
$ ld -v
GNU ld (binutils-2.25-f3d35cf6) 2.25.51.20141117
^
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300652760 Oct 26 11:57 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 16932627 Oct 26 11:57 Image.lz4-dtb
$ ld -v
GNU ld (binutils-2.27-53dd00a1) 2.27.0.20170315
^
pre patch:
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 11:43 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 18159474 Oct 26 11:43 Image.lz4-dtb
post patch:
$ ls -l vmlinux
-rwxr-x--- 1 ndesaulniers eng 300376208 Oct 26 12:06 vmlinux
$ ls -l Image.lz4-dtb
-rw-r----- 1 ndesaulniers eng 16932466 Oct 26 12:06 Image.lz4-dtb
By Siqi's measurement w/ gzip:
binutils 2.27 with this patch (with --no-apply-dynamic-relocs):
Image 41535488
Image.gz 13404067
binutils 2.27 without this patch (without --no-apply-dynamic-relocs):
Image 41535488
Image.gz 14125516
Any compression scheme should be able to get better results from the
longer runs of zeros, not just GZIP and LZ4.
10ms boot time savings isn't anything to get excited about, but users of
arm64+compression+bfd-2.27 should not have to pay a penalty for no
runtime improvement.
Reported-by: Gopinath Elanchezhian <[email protected]>
Reported-by: Sindhuri Pentyala <[email protected]>
Reported-by: Wei Wang <[email protected]>
Suggested-by: Ard Biesheuvel <[email protected]>
Suggested-by: Rahul Chaudhry <[email protected]>
Suggested-by: Siqi Lin <[email protected]>
Suggested-by: Stephen Hines <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
[will: added comment to Makefile]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/Makefile | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -14,8 +14,12 @@ LDFLAGS_vmlinux :=-p --no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
GZFLAGS :=-9
-ifneq ($(CONFIG_RELOCATABLE),)
-LDFLAGS_vmlinux += -pie -shared -Bsymbolic
+ifeq ($(CONFIG_RELOCATABLE), y)
+# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
+# for relative relocs, since this leads to better Image compression
+# with the relocation offsets always being zero.
+LDFLAGS_vmlinux += -pie -shared -Bsymbolic \
+ $(call ld-option, --no-apply-dynamic-relocs)
endif
ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: "tang.junhui" <[email protected]>
[ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ]
Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.
[ML: applied by 3-way merge]
Signed-off-by: tang.junhui <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/request.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -468,6 +468,7 @@ struct search {
unsigned recoverable:1;
unsigned write:1;
unsigned read_dirty_data:1;
+ unsigned cache_missed:1;
unsigned long start_time;
@@ -653,6 +654,7 @@ static inline struct search *search_allo
s->orig_bio = bio;
s->cache_miss = NULL;
+ s->cache_missed = 0;
s->d = d;
s->recoverable = 1;
s->write = op_is_write(bio_op(bio));
@@ -771,7 +773,7 @@ static void cached_dev_read_done_bh(stru
struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
bch_mark_cache_accounting(s->iop.c, s->d,
- !s->cache_miss, s->iop.bypass);
+ !s->cache_missed, s->iop.bypass);
trace_bcache_read(s->orig_bio, !s->cache_miss, s->iop.bypass);
if (s->iop.error)
@@ -790,6 +792,8 @@ static int cached_dev_cache_miss(struct
struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
struct bio *miss, *cache_bio;
+ s->cache_missed = 1;
+
if (s->cache_miss || s->iop.bypass) {
miss = bio_next_split(bio, sectors, GFP_NOIO, s->d->bio_split);
ret = miss == bio ? MAP_DONE : MAP_CONTINUE;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liang Chen <[email protected]>
[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ]
mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.
As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.
Signed-off-by: Liang Chen <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Reviewed-by: Eric Wheeler <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/super.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -2091,6 +2091,7 @@ static void bcache_exit(void)
if (bcache_major)
unregister_blkdev(bcache_major, "bcache");
unregister_reboot_notifier(&reboot);
+ mutex_destroy(&bch_register_lock);
}
static int __init bcache_init(void)
@@ -2109,14 +2110,15 @@ static int __init bcache_init(void)
bcache_major = register_blkdev(0, "bcache");
if (bcache_major < 0) {
unregister_reboot_notifier(&reboot);
+ mutex_destroy(&bch_register_lock);
return bcache_major;
}
if (!(bcache_wq = alloc_workqueue("bcache", WQ_MEM_RECLAIM, 0)) ||
!(bcache_kobj = kobject_create_and_add("bcache", fs_kobj)) ||
- sysfs_create_files(bcache_kobj, files) ||
bch_request_init() ||
- bch_debug_init(bcache_kobj))
+ bch_debug_init(bcache_kobj) ||
+ sysfs_create_files(bcache_kobj, files))
goto err;
return 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qiang <[email protected]>
[ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ]
PCIe PME and native hotplug share the same interrupt number, so hotplug
interrupts are also processed by PME. In some cases, e.g., a Link Down
interrupt, a device may be present but unreachable, so when we try to
read its Root Status register, the read fails and we get all ones data
(0xffffffff).
Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e.,
"some device has asserted PME," so we scheduled pcie_pme_work_fn(). This
caused an infinite loop because pcie_pme_work_fn() tried to handle PME
requests until PCI_EXP_RTSTA_PME is cleared, but with the link down,
PCI_EXP_RTSTA_PME can't be cleared.
Check for the invalid 0xffffffff data everywhere we read the Root Status
register.
1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from
non-existent devices") added similar checks in the hotplug driver.
Signed-off-by: Qiang Zheng <[email protected]>
[bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow
other similar checks]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pcie/pme.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -232,6 +232,9 @@ static void pcie_pme_work_fn(struct work
break;
pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
+ if (rtsta == (u32) ~0)
+ break;
+
if (rtsta & PCI_EXP_RTSTA_PME) {
/*
* Clear PME status of the port. If there are other
@@ -279,7 +282,7 @@ static irqreturn_t pcie_pme_irq(int irq,
spin_lock_irqsave(&data->lock, flags);
pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
- if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+ if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) {
spin_unlock_irqrestore(&data->lock, flags);
return IRQ_NONE;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Douglas Gilbert <[email protected]>
[ Upstream commit e33d7c56450b0a5c7290cbf9e1581fab5174f552 ]
The scsi_debug driver incorrectly suggests there is an error with the
SCSI WRITE SAME command when the number_of_logical_blocks is greater
than 1. It will also suggest there is an error when NDOB
(no data-out buffer) is set and the number_of_logical_blocks is
greater than 0. Both are valid, fix.
Signed-off-by: Douglas Gilbert <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_debug.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2996,11 +2996,11 @@ static int resp_write_same(struct scsi_c
if (-1 == ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
return DID_ERROR << 16;
- } else if (sdebug_verbose && (ret < (num * sdebug_sector_size)))
+ } else if (sdebug_verbose && !ndob && (ret < sdebug_sector_size))
sdev_printk(KERN_INFO, scp->device,
- "%s: %s: cdb indicated=%u, IO sent=%d bytes\n",
+ "%s: %s: lb size=%u, IO sent=%d bytes\n",
my_name, "write same",
- num * sdebug_sector_size, ret);
+ sdebug_sector_size, ret);
/* Copy first sector to remaining blocks */
for (i = 1 ; i < num ; i++)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Garloff <[email protected]>
[ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ]
All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.
Signed-off-by: Kurt Garloff <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_devinfo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -160,7 +160,7 @@ static struct {
{"DGC", "RAID", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, storage on LUN 0 */
{"DGC", "DISK", NULL, BLIST_SPARSELUN}, /* Dell PV 650F, no storage on LUN 0 */
{"EMC", "Invista", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
- {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_FORCELUN},
+ {"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_REPORTLUN2},
{"EMULEX", "MD21/S2 ESDI", NULL, BLIST_SINGLELUN},
{"easyRAID", "16P", NULL, BLIST_NOREPORTLUN},
{"easyRAID", "X6P", NULL, BLIST_NOREPORTLUN},
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: weiping zhang <[email protected]>
[ Upstream commit 658e9a6dc1126f21fa417cd213e1cdbff8be0ba2 ]
/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:
echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart
Signed-off-by: weiping zhang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -260,6 +260,7 @@ static ssize_t
allow_restart_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ bool v;
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct scsi_device *sdp = sdkp->device;
@@ -269,7 +270,10 @@ allow_restart_store(struct device *dev,
if (sdp->type != TYPE_DISK)
return -EINVAL;
- sdp->allow_restart = simple_strtoul(buf, NULL, 10);
+ if (kstrtobool(buf, &v))
+ return -EINVAL;
+
+ sdp->allow_restart = v;
return count;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
[ Upstream commit 5e422f5e4fd71d18bc6b851eeb3864477b3d842e ]
There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the
passed in new extent state but always converted to normal, leading to wrong
behavior when converting from normal to unwritten.
Only found by code inspection, it seems like this code path to move partial
extent from written to unwritten while merging it with the next extent is
rarely exercised.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/libxfs/xfs_bmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -2713,7 +2713,7 @@ xfs_bmap_add_extent_unwritten_real(
&i)))
goto done;
XFS_WANT_CORRUPTED_GOTO(mp, i == 0, done);
- cur->bc_rec.b.br_state = XFS_EXT_NORM;
+ cur->bc_rec.b.br_state = new->br_state;
if ((error = xfs_btree_insert(cur, &i)))
goto done;
XFS_WANT_CORRUPTED_GOTO(mp, i == 1, done);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 2bf9806d4228f7a6195f8e03eda0479d2a93b411 ]
The driver may sleep under a spinlock, and the function call path is:
rtw_surveydone_event_callback(acquire the spinlock)
rtw_createbss_cmd
kzalloc(GFP_KERNEL) --> may sleep
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -342,7 +342,7 @@ u8 rtw_createbss_cmd(struct adapter *pa
else
RT_TRACE(_module_rtl871x_cmd_c_, _drv_info_, (" createbss for SSid:%s\n", pmlmepriv->assoc_ssid.Ssid));
- pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (!pcmd) {
res = _FAIL;
goto exit;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ]
When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.
Reported-by: Cezary Sliwa <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/udf/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -710,7 +710,7 @@ static loff_t udf_check_vsd(struct super
else
sectorsize = sb->s_blocksize;
- sector += (sbi->s_session << sb->s_blocksize_bits);
+ sector += (((loff_t)sbi->s_session) << sb->s_blocksize_bits);
udf_debug("Starting at sector %u (%ld byte sectors)\n",
(unsigned int)(sector >> sb->s_blocksize_bits),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ]
When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.
Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.
So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.
Reported-by: Curt <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1689,8 +1689,11 @@ static void ops_complete_reconstruct(voi
struct r5dev *dev = &sh->dev[i];
if (dev->written || i == pd_idx || i == qd_idx) {
- if (!discard && !test_bit(R5_SkipCopy, &dev->flags))
+ if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) {
set_bit(R5_UPTODATE, &dev->flags);
+ if (test_bit(STRIPE_EXPAND_READY, &sh->state))
+ set_bit(R5_Expanded, &dev->flags);
+ }
if (fua)
set_bit(R5_WantFUA, &dev->flags);
if (sync)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
[ Upstream commit c0b64f58e8d49570aa9ee55d880f92c20ff0166b ]
According to the C standard the behavior of computations with
integer operands is as follows:
* A computation involving unsigned operands can never overflow,
because a result that cannot be represented by the resulting
unsigned integer type is reduced modulo the number that is one
greater than the largest value that can be represented by the
resulting type.
* The behavior for signed integer underflow and overflow is
undefined.
Hence only use unsigned integers when checking for integer
overflow.
This patch is what I came up with after having analyzed the
following smatch warnings:
drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'
drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'
Signed-off-by: Bart Van Assche <[email protected]>
Acked-by: Sean Hefty <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/cma.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1482,7 +1482,7 @@ static struct rdma_id_private *cma_id_fr
return id_priv;
}
-static inline int cma_user_data_offset(struct rdma_id_private *id_priv)
+static inline u8 cma_user_data_offset(struct rdma_id_private *id_priv)
{
return cma_family(id_priv) == AF_IB ? 0 : sizeof(struct cma_hdr);
}
@@ -1877,7 +1877,8 @@ static int cma_req_handler(struct ib_cm_
struct rdma_id_private *listen_id, *conn_id = NULL;
struct rdma_cm_event event;
struct net_device *net_dev;
- int offset, ret;
+ u8 offset;
+ int ret;
listen_id = cma_id_from_event(cm_id, ib_event, &net_dev);
if (IS_ERR(listen_id))
@@ -3309,7 +3310,8 @@ static int cma_resolve_ib_udp(struct rdm
struct ib_cm_sidr_req_param req;
struct ib_cm_id *id;
void *private_data;
- int offset, ret;
+ u8 offset;
+ int ret;
memset(&req, 0, sizeof req);
offset = cma_user_data_offset(id_priv);
@@ -3366,7 +3368,8 @@ static int cma_connect_ib(struct rdma_id
struct rdma_route *route;
void *private_data;
struct ib_cm_id *id;
- int offset, ret;
+ u8 offset;
+ int ret;
memset(&req, 0, sizeof req);
offset = cma_user_data_offset(id_priv);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Williamson <[email protected]>
[ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ]
When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time. The device might need
to write out data or it might be actively in use. If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device. This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:
pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
lspci: Unable to read the standard configuration space header of device 0000:01:0a.3
We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/remove.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -19,9 +19,9 @@ static void pci_stop_dev(struct pci_dev
pci_pme_active(dev, false);
if (dev->is_added) {
+ device_release_driver(&dev->dev);
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
- device_release_driver(&dev->dev);
dev->is_added = 0;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matteo Croce <[email protected]>
[ Upstream commit 258bbb1b0e594ad5f5652cb526b3c63e6a7fad3d ]
The ICMP implementation currently replies to an ICMP time exceeded message
(type 11) with an ICMP host unreachable message (type 3, code 1).
However, time exceeded messages can either represent "time to live exceeded
in transit" (code 0) or "fragment reassembly time exceeded" (code 1).
Unconditionally replying to "fragment reassembly time exceeded" with
host unreachable messages might cause unjustified connection resets
which are now easily triggered as UFO has been removed, because, in turn,
sending large buffers triggers IP fragmentation.
The issue can be easily reproduced by running a lot of UDP streams
which is likely to trigger IP fragmentation:
# start netserver in the test namespace
ip netns add test
ip netns exec test netserver
# create a VETH pair
ip link add name veth0 type veth peer name veth0 netns test
ip link set veth0 up
ip -n test link set veth0 up
for i in $(seq 20 29); do
# assign addresses to both ends
ip addr add dev veth0 192.168.$i.1/24
ip -n test addr add dev veth0 192.168.$i.2/24
# start the traffic
netperf -L 192.168.$i.1 -H 192.168.$i.2 -t UDP_STREAM -l 0 &
done
# wait
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
We need to differentiate instead: if fragment reassembly time exceeded
is reported, we need to silently drop the packet,
if time to live exceeded is reported, maintain the current behaviour.
In both cases increment the related error count "icmpInTimeExcds".
While at it, fix a typo in a comment, and convert the if statement
into a switch to mate it more readable.
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/icmp.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -766,7 +766,7 @@ static bool icmp_tag_validation(int prot
}
/*
- * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, ICMP_QUENCH, and
+ * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEEDED, ICMP_QUENCH, and
* ICMP_PARAMETERPROB.
*/
@@ -794,7 +794,8 @@ static bool icmp_unreach(struct sk_buff
if (iph->ihl < 5) /* Mangled header, drop. */
goto out_err;
- if (icmph->type == ICMP_DEST_UNREACH) {
+ switch (icmph->type) {
+ case ICMP_DEST_UNREACH:
switch (icmph->code & 15) {
case ICMP_NET_UNREACH:
case ICMP_HOST_UNREACH:
@@ -830,8 +831,16 @@ static bool icmp_unreach(struct sk_buff
}
if (icmph->code > NR_ICMP_UNREACH)
goto out;
- } else if (icmph->type == ICMP_PARAMETERPROB)
+ break;
+ case ICMP_PARAMETERPROB:
info = ntohl(icmph->un.gateway) >> 24;
+ break;
+ case ICMP_TIME_EXCEEDED:
+ __ICMP_INC_STATS(net, ICMP_MIB_INTIMEEXCDS);
+ if (icmph->code == ICMP_EXC_FRAGTIME)
+ goto out;
+ break;
+ }
/*
* Throw it at our lower layers
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: nixiaoming <[email protected]>
[ Upstream commit c79dde629d2027ca80329c62854a7635e623d527 ]
After rmmod 8250.ko
tty_kref_put starts kwork (release_one_tty) to release proc interface
oops when accessing driver->driver_name in proc_tty_unregister_driver
Use jprobe, found driver->driver_name point to 8250.ko
static static struct uart_driver serial8250_reg
.driver_name= serial,
Use name in proc_dir_entry instead of driver->driver_name to fix oops
test on linux 4.1.12:
BUG: unable to handle kernel paging request at ffffffffa01979de
IP: [<ffffffff81310f40>] strchr+0x0/0x30
PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ... ... [last unloaded: 8250]
CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G O 4.1.12 #1
Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015
Workqueue: events release_one_tty
task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000
RIP: 0010:[<ffffffff81310f40>] [<ffffffff81310f40>] strchr+0x0/0x30
RSP: 0018:ffff880852887c90 EFLAGS: 00010282
RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004
RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de
RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0
R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de
R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840
FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0
Stack:
ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2
ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010
ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08
Call Trace:
[<ffffffff812349b1>] ? __xlate_proc_name+0x71/0xd0
[<ffffffff812354f0>] remove_proc_entry+0x40/0x180
[<ffffffff815f6811>] ? _raw_spin_lock_irqsave+0x41/0x60
[<ffffffff813be520>] ? destruct_tty_driver+0x60/0xe0
[<ffffffff81237c68>] proc_tty_unregister_driver+0x28/0x40
[<ffffffff813be548>] destruct_tty_driver+0x88/0xe0
[<ffffffff813be5bd>] tty_driver_kref_put+0x1d/0x20
[<ffffffff813becca>] release_one_tty+0x5a/0xd0
[<ffffffff81074159>] process_one_work+0x139/0x420
[<ffffffff810745a1>] worker_thread+0x121/0x450
[<ffffffff81074480>] ? process_scheduled_works+0x40/0x40
[<ffffffff8107a16c>] kthread+0xec/0x110
[<ffffffff81080000>] ? tg_rt_schedulable+0x210/0x220
[<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80
[<ffffffff815f7292>] ret_from_fork+0x42/0x70
[<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80
Signed-off-by: nixiaoming <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/proc_tty.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -14,6 +14,7 @@
#include <linux/tty.h>
#include <linux/seq_file.h>
#include <linux/bitops.h>
+#include "internal.h"
/*
* The /proc/tty directory inodes...
@@ -164,7 +165,7 @@ void proc_tty_unregister_driver(struct t
if (!ent)
return;
- remove_proc_entry(driver->driver_name, proc_tty_driver);
+ remove_proc_entry(ent->name, proc_tty_driver);
driver->proc_entry = NULL;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian Foster <[email protected]>
[ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ]
It is possible for mkfs to format very small filesystems with too
small of an internal log with respect to the various minimum size
and block count requirements. If this occurs when the log happens to
be smaller than the scan window used for cycle verification and the
scan wraps the end of the log, the start_blk calculation in
xlog_find_head() underflows and leads to an attempt to scan an
invalid range of log blocks. This results in log recovery failure
and a failed mount.
Since there may be filesystems out in the wild with this kind of
geometry, we cannot simply refuse to mount. Instead, cap the scan
window for cycle verification to the size of the physical log. This
ensures that the cycle verification proceeds as expected when the
scan wraps the end of the log.
Reported-by: Zorro Lang <[email protected]>
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_log_recover.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -753,7 +753,7 @@ xlog_find_head(
* in the in-core log. The following number can be made tighter if
* we actually look at the block size of the filesystem.
*/
- num_scan_bblks = XLOG_TOTAL_REC_SHIFT(log);
+ num_scan_bblks = min_t(int, log_bbnum, XLOG_TOTAL_REC_SHIFT(log));
if (head_blk >= num_scan_bblks) {
/*
* We are guaranteed that the entire check can be performed
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Brugger <[email protected]>
[ Upstream commit 395df08d2e1de238a9c8c33fdcd0e2160efd63a9 ]
There exist two Mediatek iommu drivers for the two different
generations of the device. But both drivers have the same name
"mtk-iommu". This breaks the registration of the second driver:
Error: Driver 'mtk-iommu' is already registered, aborting...
Fix this by changing the name for first generation to
"mtk-iommu-v1".
Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/mtk_iommu_v1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -703,7 +703,7 @@ static struct platform_driver mtk_iommu_
.probe = mtk_iommu_probe,
.remove = mtk_iommu_remove,
.driver = {
- .name = "mtk-iommu",
+ .name = "mtk-iommu-v1",
.of_match_table = mtk_iommu_of_ids,
.pm = &mtk_iommu_pm_ops,
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Zabel <[email protected]>
[ Upstream commit a3350f9c57ffad569c40f7320b89da1f3061c5bb ]
The pcf8563_clkout_recalc_rate function erroneously ignores the
frequency index read from the CLKO register and always returns
32768 Hz.
Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-pcf8563.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -422,7 +422,7 @@ static unsigned long pcf8563_clkout_reca
return 0;
buf &= PCF8563_REG_CLKO_F_MASK;
- return clkout_rates[ret];
+ return clkout_rates[buf];
}
static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: "William A. Kennington III" <[email protected]>
[ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ]
The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.
This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.
Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: William A. Kennington III <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/opal-async.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/powerpc/platforms/powernv/opal-async.c
+++ b/arch/powerpc/platforms/powernv/opal-async.c
@@ -39,18 +39,18 @@ int __opal_async_get_token(void)
int token;
spin_lock_irqsave(&opal_async_comp_lock, flags);
- token = find_first_bit(opal_async_complete_map, opal_max_async_tokens);
+ token = find_first_zero_bit(opal_async_token_map, opal_max_async_tokens);
if (token >= opal_max_async_tokens) {
token = -EBUSY;
goto out;
}
- if (__test_and_set_bit(token, opal_async_token_map)) {
+ if (!__test_and_clear_bit(token, opal_async_complete_map)) {
token = -EBUSY;
goto out;
}
- __clear_bit(token, opal_async_complete_map);
+ __set_bit(token, opal_async_token_map);
out:
spin_unlock_irqrestore(&opal_async_comp_lock, flags);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
[ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ]
IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/sysdev/ipic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -845,12 +845,12 @@ void ipic_disable_mcp(enum ipic_mcp_irq
u32 ipic_get_mcp_status(void)
{
- return ipic_read(primary_ipic->regs, IPIC_SERMR);
+ return ipic_read(primary_ipic->regs, IPIC_SERSR);
}
void ipic_clear_mcp_status(u32 mask)
{
- ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
+ ipic_write(primary_ipic->regs, IPIC_SERSR, mask);
}
/* Return an interrupt vector or 0 if no interrupt is pending. */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: KUWAZAWA Takuya <[email protected]>
[ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ]
Information about ipvs in different network namespace can be seen via procfs.
How to reproduce:
# ip netns add ns01
# ip netns add ns02
# ip netns exec ns01 ip a add dev lo 127.0.0.1/8
# ip netns exec ns02 ip a add dev lo 127.0.0.1/8
# ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80
# ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80
The ipvsadm displays information about its own network namespace only.
# ip netns exec ns01 ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.1.1.1:80 wlc
# ip netns exec ns02 ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.1.1.2:80 wlc
But I can see information about other network namespace via procfs.
# ip netns exec ns01 cat /proc/net/ip_vs
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 0A010101:0050 wlc
TCP 0A010102:0050 wlc
# ip netns exec ns02 cat /proc/net/ip_vs
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 0A010102:0050 wlc
Signed-off-by: KUWAZAWA Takuya <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/ipvs/ip_vs_ctl.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2040,12 +2040,16 @@ static int ip_vs_info_seq_show(struct se
seq_puts(seq,
" -> RemoteAddress:Port Forward Weight ActiveConn InActConn\n");
} else {
+ struct net *net = seq_file_net(seq);
+ struct netns_ipvs *ipvs = net_ipvs(net);
const struct ip_vs_service *svc = v;
const struct ip_vs_iter *iter = seq->private;
const struct ip_vs_dest *dest;
struct ip_vs_scheduler *sched = rcu_dereference(svc->scheduler);
char *sched_name = sched ? sched->name : "none";
+ if (svc->ipvs != ipvs)
+ return 0;
if (iter->table == ip_vs_svc_table) {
#ifdef CONFIG_IP_VS_IPV6
if (svc->af == AF_INET6)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Wilck <[email protected]>
[ Upstream commit dfb2e6f46b3074eb85203d8f0888b71ec1c2e37a ]
This patch cleans up a lot of warnings when unloading the driver.
A current example of the stack trace starts with:
[ 142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html
This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
---------------------------
Original patch description:
---------------------------
Unloading the hpsa driver causes warnings
[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0'
with two different stacks:
1)
[ 1063.793774] [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780] [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784] [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802] [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
2)
[ 1063.797103] [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118] [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134] [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.
This patch fixes this by reverting the order of device deletions.
Tested-by: Don Brace <[email protected]>
Reviewed-by: Don Brace <[email protected]>
Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hpsa.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -9105,6 +9105,8 @@ static void hpsa_remove_one(struct pci_d
destroy_workqueue(h->rescan_ctlr_wq);
destroy_workqueue(h->resubmit_wq);
+ hpsa_delete_sas_host(h);
+
/*
* Call before disabling interrupts.
* scsi_remove_host can trigger I/O operations especially
@@ -9139,8 +9141,6 @@ static void hpsa_remove_one(struct pci_d
h->lockup_detected = NULL; /* init_one 2 */
/* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
- hpsa_delete_sas_host(h);
-
kfree(h); /* init_one 1 */
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
[ Upstream commit 05c14c03138532a3cb2aa29c2960445c8753343b ]
In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.
I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().
Fix it by swapping the second comparision, so it can be true.
Reported-by: David Binderman <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/perf/hv-24x7.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -516,7 +516,7 @@ static int memord(const void *d1, size_t
{
if (s1 < s2)
return 1;
- if (s2 > s1)
+ if (s1 > s2)
return -1;
return memcmp(d1, d2, s1);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bin Liu <[email protected]>
commit bd3486ded7a0c313a6575343e6c2b21d14476645 upstream.
When babble condition happens, the musb controller might automatically
turns off VBUS. On DA8xx platform, the controller generates drvvbus
interrupt for turning off VBUS along with the babble interrupt.
In this case, we should handle the babble interrupt first and recover
from the babble condition.
This change ignores the drvvbus interrupt if babble interrupt is also
generated at the same time, so the babble recovery routine works
properly.
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/da8xx.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -302,7 +302,15 @@ static irqreturn_t da8xx_musb_interrupt(
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
- } else {
+ } else if (!(musb->int_usb & MUSB_INTR_BABBLE)){
+ /*
+ * When babble condition happens, drvvbus interrupt
+ * is also generated. Ignore this drvvbus interrupt
+ * and let babble interrupt handler recovers the
+ * controller; otherwise, the host-mode flag is lost
+ * due to the MUSB_DEV_MODE() call below and babble
+ * recovery logic will not called.
+ */
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Brugger <[email protected]>
[ Upstream commit fb2c1934f30577756e55e24e8870b45c78da3bc2 ]
When compiling using sparse, we got the following error:
drivers/soc/mediatek/mtk-pmic-wrap.c:686:25: error: dubious one-bit signed bitfield
Changing the data type to unsigned fixes this.
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -522,7 +522,7 @@ struct pmic_wrapper_type {
u32 int_en_all;
u32 spi_w;
u32 wdt_src;
- int has_bridge:1;
+ unsigned int has_bridge:1;
int (*init_reg_clock)(struct pmic_wrapper *wrp);
int (*init_soc_specific)(struct pmic_wrapper *wrp);
};
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Wilck <[email protected]>
[ Upstream commit 55ca38b4255bb336c2d35990bdb2b368e19b435a ]
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html
This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
--------------------------------------
Original patch description from Martin:
--------------------------------------
When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).
Tested-by: Don Brace <[email protected]>
Reviewed-by: Don Brace <[email protected]>
Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hpsa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -9632,9 +9632,9 @@ static void hpsa_free_sas_phy(struct hps
struct sas_phy *phy = hpsa_sas_phy->phy;
sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
- sas_phy_free(phy);
if (hpsa_sas_phy->added_to_port)
list_del(&hpsa_sas_phy->phy_list_entry);
+ sas_phy_delete(phy);
kfree(hpsa_sas_phy);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Vesker <[email protected]>
[ Upstream commit b4b678b06f6eef18bff44a338c01870234db0bc9 ]
When ndo_open and ndo_stop are called RTNL lock should be held.
In this specific case ipoib_ib_dev_open calls the offloaded ndo_open
which re-sets the number of TX queue assuming RTNL lock is held.
Since RTNL lock is not held, RTNL assert will fail.
Signed-off-by: Alex Vesker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -1177,10 +1177,15 @@ static void __ipoib_ib_dev_flush(struct
ipoib_ib_dev_down(dev);
if (level == IPOIB_FLUSH_HEAVY) {
+ rtnl_lock();
if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
ipoib_ib_dev_stop(dev);
- if (ipoib_ib_dev_open(dev) != 0)
+
+ result = ipoib_ib_dev_open(dev);
+ rtnl_unlock();
+ if (result)
return;
+
if (netif_queue_stopped(dev))
netif_start_queue(dev);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Duyck <[email protected]>
[ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ]
This patch intoduces a slight adjustment for macvlan to address the fact
that in source mode I was seeing two copies of any packet addressed to the
macvlan interface being delivered where there should have been only one.
The issue appears to be that one copy was delivered based on the source MAC
address and then the second copy was being delivered based on the
destination MAC address. To fix it I am just treating a unicast address
match as though it is not a match since source based macvlan isn't supposed
to be matching based on the destination MAC anyway.
Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Alexander Duyck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macvlan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -452,7 +452,7 @@ static rx_handler_result_t macvlan_handl
struct macvlan_dev, list);
else
vlan = macvlan_hash_lookup(port, eth->h_dest);
- if (vlan == NULL)
+ if (!vlan || vlan->mode == MACVLAN_MODE_SOURCE)
return RX_HANDLER_PASS;
dev = vlan->dev;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
[ Upstream commit 35fb2a88ed4b77356fa679a8525c869a3594e287 ]
The scqe.stag is actually __b32, fix it.
drivers/infiniband/hw/cxgb4/cq.c:754:52: warning: cast to restricted __be32
Cc: Steve Wise <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Reviewed-by: Steve Wise <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/cxgb4/t4.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -171,7 +171,7 @@ struct t4_cqe {
__be32 msn;
} rcqe;
struct {
- u32 stag;
+ __be32 stag;
u16 nada2;
u16 cidx;
} scqe;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ]
We could allocate less memory than intended because we do:
bfad->regdata = kzalloc(len << 2, GFP_KERNEL);
The shift can overflow leading to a crash. This is debugfs code so the
impact is very small. I fixed the network version of this in March with
commit 13e2d5187f6b ("bna: integer overflow bug in debugfs").
Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/bfa/bfad_debugfs.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -255,7 +255,8 @@ bfad_debugfs_write_regrd(struct file *fi
struct bfad_s *bfad = port->bfad;
struct bfa_s *bfa = &bfad->bfa;
struct bfa_ioc_s *ioc = &bfa->ioc;
- int addr, len, rc, i;
+ int addr, rc, i;
+ u32 len;
u32 *regbuf;
void __iomem *rb, *reg_addr;
unsigned long flags;
@@ -266,7 +267,7 @@ bfad_debugfs_write_regrd(struct file *fi
return PTR_ERR(kern_buf);
rc = sscanf(kern_buf, "%x:%x", &addr, &len);
- if (rc < 2) {
+ if (rc < 2 || len > (UINT_MAX >> 2)) {
printk(KERN_INFO
"bfad[%d]: %s failed to read user buf\n",
bfad->inst_no, __func__);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 08880f8e08cbd814e870e9d3ab9530abc1bce226 ]
The driver may sleep under a spinlock, and the function call path is:
rtw_set_802_11_bssid(acquire the spinlock)
rtw_disassoc_cmd
kzalloc(GFP_KERNEL) --> may sleep
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/core/rtw_cmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -522,7 +522,7 @@ u8 rtw_disassoc_cmd(struct adapter *pada
if (enqueue) {
/* need enqueue, prepare cmd_obj and enqueue */
- cmdobj = kzalloc(sizeof(*cmdobj), GFP_KERNEL);
+ cmdobj = kzalloc(sizeof(*cmdobj), GFP_ATOMIC);
if (!cmdobj) {
res = _FAIL;
kfree(param);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 42c8eb3f6e15367981b274cb79ee4657e2c6949d ]
The driver may sleep under a spinlock, and the function call path is:
vt6655_suspend (acquire the spinlock)
pci_set_power_state
__pci_start_power_transition (drivers/pci/pci.c)
msleep --> may sleep
To fix it, pci_set_power_state is called without having a spinlock.
This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/vt6655/device_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1698,10 +1698,11 @@ static int vt6655_suspend(struct pci_dev
MACbShutdown(priv);
pci_disable_device(pcid);
- pci_set_power_state(pcid, pci_choose_state(pcid, state));
spin_unlock_irqrestore(&priv->lock, flags);
+ pci_set_power_state(pcid, pci_choose_state(pcid, state));
+
return 0;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Parav Pandit <[email protected]>
[ Upstream commit 99260132fde7bddc6e0132ce53da94d1c9ccabcb ]
The original code only took into consideration the largest header
possible after the IB_BTH_BYTES. This was incorrect, as the largest
possible header size is the largest possible combination of headers we
might run into. The new code accounts for all possible headers in the
largest possible combination and subtracts that from the MTU to make
sure that all packets will fit on the wire.
Link: https://www.spinics.net/lists/linux-rdma/msg54558.html
Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Daniel Jurgens <[email protected]>
Reported-by: Roland Dreier <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/rdma/ib_addr.h | 7 ++++---
include/rdma/ib_pack.h | 19 +++++++++++--------
2 files changed, 15 insertions(+), 11 deletions(-)
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -243,10 +243,11 @@ static inline void rdma_addr_set_dgid(st
static inline enum ib_mtu iboe_get_mtu(int mtu)
{
/*
- * reduce IB headers from effective IBoE MTU. 28 stands for
- * atomic header which is the biggest possible header after BTH
+ * Reduce IB headers from effective IBoE MTU.
*/
- mtu = mtu - IB_GRH_BYTES - IB_BTH_BYTES - 28;
+ mtu = mtu - (IB_GRH_BYTES + IB_UDP_BYTES + IB_BTH_BYTES +
+ IB_EXT_XRC_BYTES + IB_EXT_ATOMICETH_BYTES +
+ IB_ICRC_BYTES);
if (mtu >= ib_mtu_enum_to_int(IB_MTU_4096))
return IB_MTU_4096;
--- a/include/rdma/ib_pack.h
+++ b/include/rdma/ib_pack.h
@@ -37,14 +37,17 @@
#include <uapi/linux/if_ether.h>
enum {
- IB_LRH_BYTES = 8,
- IB_ETH_BYTES = 14,
- IB_VLAN_BYTES = 4,
- IB_GRH_BYTES = 40,
- IB_IP4_BYTES = 20,
- IB_UDP_BYTES = 8,
- IB_BTH_BYTES = 12,
- IB_DETH_BYTES = 8
+ IB_LRH_BYTES = 8,
+ IB_ETH_BYTES = 14,
+ IB_VLAN_BYTES = 4,
+ IB_GRH_BYTES = 40,
+ IB_IP4_BYTES = 20,
+ IB_UDP_BYTES = 8,
+ IB_BTH_BYTES = 12,
+ IB_DETH_BYTES = 8,
+ IB_EXT_ATOMICETH_BYTES = 28,
+ IB_EXT_XRC_BYTES = 4,
+ IB_ICRC_BYTES = 4
};
struct ib_field {
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: weiping zhang <[email protected]>
[ Upstream commit 623401ee33e42cee64d333877892be8db02951eb ]
/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.
Signed-off-by: weiping zhang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -234,11 +234,15 @@ manage_start_stop_store(struct device *d
{
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct scsi_device *sdp = sdkp->device;
+ bool v;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
+ if (kstrtobool(buf, &v))
+ return -EINVAL;
+
+ sdp->manage_start_stop = v;
return count;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]
The build robot is complaining on Blackfin:
drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
pointer to incomplete type 'struct gpio_port_t'
writew(readw(®s->port_fer) & ~BIT(offset),
^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
if (readl(®s->invert_set) & pintbit)
^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.
The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.
Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.
Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.
This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.
Cc: Steven Miao <[email protected]>
Cc: Huanhuan Feng <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/blackfin/Kconfig | 7 +++++--
arch/blackfin/Kconfig.debug | 1 +
drivers/pinctrl/Kconfig | 3 ++-
3 files changed, 8 insertions(+), 3 deletions(-)
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -319,11 +319,14 @@ config BF53x
config GPIO_ADI
def_bool y
+ depends on !PINCTRL
depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
-config PINCTRL
+config PINCTRL_BLACKFIN_ADI2
def_bool y
- depends on BF54x || BF60x
+ depends on (BF54x || BF60x)
+ select PINCTRL
+ select PINCTRL_ADI2
config MEM_MT48LC64M4A2FB_7E
bool
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -17,6 +17,7 @@ config DEBUG_VERBOSE
config DEBUG_MMRS
tristate "Generate Blackfin MMR tree"
+ depends on !PINCTRL
select DEBUG_FS
help
Create a tree of Blackfin MMRs via the debugfs tree. If
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -26,7 +26,8 @@ config DEBUG_PINCTRL
config PINCTRL_ADI2
bool "ADI pin controller driver"
- depends on BLACKFIN
+ depends on (BF54x || BF60x)
+ depends on !GPIO_ADI
select PINMUX
select IRQ_DOMAIN
help
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ]
_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mman.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -63,8 +63,9 @@ static inline bool arch_validate_prot(un
* ("bit1" and "bit2" must be single bits)
*/
#define _calc_vm_trans(x, bit1, bit2) \
+ ((!(bit1) || !(bit2)) ? 0 : \
((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
- : ((x) & (bit1)) / ((bit1) / (bit2)))
+ : ((x) & (bit1)) / ((bit1) / (bit2))))
/*
* Combine the mmap "prot" argument into "vm_flags" used internally.
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robert Baronescu <[email protected]>
[ Upstream commit 7aacbfcb331ceff3ac43096d563a1f93ed46e35e ]
Fix the way the length of the buffers used for
encryption / decryption are computed.
For e.g. in case of encryption, input buffer does not contain
an authentication tag.
Signed-off-by: Robert Baronescu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/tcrypt.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -342,7 +342,7 @@ static void test_aead_speed(const char *
}
sg_init_aead(sg, xbuf,
- *b_size + (enc ? authsize : 0));
+ *b_size + (enc ? 0 : authsize));
sg_init_aead(sgout, xoutbuf,
*b_size + (enc ? authsize : 0));
@@ -350,7 +350,9 @@ static void test_aead_speed(const char *
sg_set_buf(&sg[0], assoc, aad_size);
sg_set_buf(&sgout[0], assoc, aad_size);
- aead_request_set_crypt(req, sg, sgout, *b_size, iv);
+ aead_request_set_crypt(req, sg, sgout,
+ *b_size + (enc ? 0 : authsize),
+ iv);
aead_request_set_ad(req, aad_size);
if (secs)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Ujfalusi <[email protected]>
[ Upstream commit 288e7560e4d3e259aa28f8f58a8dfe63627a1bf6 ]
The used 0x1f mask is only valid for am335x family of SoC, different family
using this type of crossbar might have different number of electable
events. In case of am43xx family 0x3f mask should have been used for
example.
Instead of trying to handle each family's mask, just use u8 type to store
the mux value since the event offsets are aligned to byte offset.
Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/ti-dma-crossbar.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -49,12 +49,12 @@ struct ti_am335x_xbar_data {
struct ti_am335x_xbar_map {
u16 dma_line;
- u16 mux_val;
+ u8 mux_val;
};
-static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u16 val)
+static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
{
- writeb_relaxed(val & 0x1f, iomem + event);
+ writeb_relaxed(val, iomem + event);
}
static void ti_am335x_xbar_free(struct device *dev, void *route_data)
@@ -105,7 +105,7 @@ static void *ti_am335x_xbar_route_alloca
}
map->dma_line = (u16)dma_spec->args[0];
- map->mux_val = (u16)dma_spec->args[2];
+ map->mux_val = (u8)dma_spec->args[2];
dma_spec->args[2] = 0;
dma_spec->args_count = 2;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Suzuki K Poulose <[email protected]>
[ Upstream commit c7f5828bf77dcbd61d51f4736c1d5aa35663fbb4 ]
When the PMU driver is built as a module, the perf expects the
pmu->module to be valid, so that the driver is prevented from
being unloaded while it is in use. Fix the CCN pmu driver to
fill in this field.
Fixes: a33b0daab73a0 ("bus: ARM CCN PMU driver")
Cc: Pawel Moll <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/arm-ccn.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1280,6 +1280,7 @@ static int arm_ccn_pmu_init(struct arm_c
/* Perf driver registration */
ccn->dt.pmu = (struct pmu) {
+ .module = THIS_MODULE,
.attr_groups = arm_ccn_pmu_attr_groups,
.task_ctx_nr = perf_invalid_context,
.event_init = arm_ccn_pmu_event_init,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eryu Guan <[email protected]>
[ Upstream commit 350976ae21873b0d36584ea005076356431b8f79 ]
On truncate down, if new size is not block size aligned, we zero the
rest of block to avoid exposing stale data to user, and
iomap_truncate_page() skips zeroing if the range is already in
unwritten state or a hole. Then we writeback from on-disk i_size to
the new size if this range hasn't been written to disk yet, and
truncate page cache beyond new EOF and set in-core i_size.
The problem is that we could write data between di_size and newsize
before removing the page cache beyond newsize, as the extents may
still be in unwritten state right after a buffer write. As such, the
page of data that newsize lies in has not been zeroed by page cache
invalidation before it is written, and xfs_do_writepage() hasn't
triggered it's "zero data beyond EOF" case because we haven't
updated in-core i_size yet. Then a subsequent mmap read could see
non-zeros past EOF.
I occasionally see this in fsx runs in fstests generic/112, a
simplified fsx operation sequence is like (assuming 4k block size
xfs):
fallocate 0x0 0x1000 0x0 keep_size
write 0x0 0x1000 0x0
truncate 0x0 0x800 0x1000
punch_hole 0x0 0x800 0x800
mapread 0x0 0x800 0x800
where fallocate allocates unwritten extent but doesn't update
i_size, buffer write populates the page cache and extent is still
unwritten, truncate skips zeroing page past new EOF and writes the
page to disk, punch_hole invalidates the page cache, at last mapread
reads the block back and sees non-zero beyond EOF.
Fix it by moving truncate_setsize() to before writeback so the page
cache invalidation zeros the partial page at the new EOF. This also
triggers "zero data beyond EOF" in xfs_do_writepage() at writeback
time, because newsize has been set and page straddles the newsize.
Also fixed the wrong 'end' param of filemap_write_and_wait_range()
call while we're at it, the 'end' is inclusive and should be
'newsize - 1'.
Suggested-by: Dave Chinner <[email protected]>
Signed-off-by: Eryu Guan <[email protected]>
Acked-by: Dave Chinner <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/xfs/xfs_iops.c | 36 ++++++++++++++++++++----------------
1 file changed, 20 insertions(+), 16 deletions(-)
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -871,22 +871,6 @@ xfs_setattr_size(
return error;
/*
- * We are going to log the inode size change in this transaction so
- * any previous writes that are beyond the on disk EOF and the new
- * EOF that have not been written out need to be written here. If we
- * do not write the data out, we expose ourselves to the null files
- * problem. Note that this includes any block zeroing we did above;
- * otherwise those blocks may not be zeroed after a crash.
- */
- if (did_zeroing ||
- (newsize > ip->i_d.di_size && oldsize != ip->i_d.di_size)) {
- error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
- ip->i_d.di_size, newsize);
- if (error)
- return error;
- }
-
- /*
* We've already locked out new page faults, so now we can safely remove
* pages from the page cache knowing they won't get refaulted until we
* drop the XFS_MMAP_EXCL lock after the extent manipulations are
@@ -902,9 +886,29 @@ xfs_setattr_size(
* user visible changes). There's not much we can do about this, except
* to hope that the caller sees ENOMEM and retries the truncate
* operation.
+ *
+ * And we update in-core i_size and truncate page cache beyond newsize
+ * before writeback the [di_size, newsize] range, so we're guaranteed
+ * not to write stale data past the new EOF on truncate down.
*/
truncate_setsize(inode, newsize);
+ /*
+ * We are going to log the inode size change in this transaction so
+ * any previous writes that are beyond the on disk EOF and the new
+ * EOF that have not been written out need to be written here. If we
+ * do not write the data out, we expose ourselves to the null files
+ * problem. Note that this includes any block zeroing we did above;
+ * otherwise those blocks may not be zeroed after a crash.
+ */
+ if (did_zeroing ||
+ (newsize > ip->i_d.di_size && oldsize != ip->i_d.di_size)) {
+ error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
+ ip->i_d.di_size, newsize - 1);
+ if (error)
+ return error;
+ }
+
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0, &tp);
if (error)
return error;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <[email protected]>
[ Upstream commit d7175373f2745ed4abe5b388d5aabd06304f801e ]
The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_alua.c | 23 ++++++++---------------
include/target/target_core_base.h | 2 +-
2 files changed, 9 insertions(+), 16 deletions(-)
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1010,7 +1010,7 @@ static void core_alua_queue_state_change
static void core_alua_do_transition_tg_pt_work(struct work_struct *work)
{
struct t10_alua_tg_pt_gp *tg_pt_gp = container_of(work,
- struct t10_alua_tg_pt_gp, tg_pt_gp_transition_work.work);
+ struct t10_alua_tg_pt_gp, tg_pt_gp_transition_work);
struct se_device *dev = tg_pt_gp->tg_pt_gp_dev;
bool explicit = (tg_pt_gp->tg_pt_gp_alua_access_status ==
ALUA_STATUS_ALTERED_BY_EXPLICIT_STPG);
@@ -1073,13 +1073,12 @@ static int core_alua_do_transition_tg_pt
/*
* Flush any pending transitions
*/
- if (!explicit && tg_pt_gp->tg_pt_gp_implicit_trans_secs &&
- atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
+ if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
ALUA_ACCESS_STATE_TRANSITION) {
/* Just in case */
tg_pt_gp->tg_pt_gp_alua_pending_state = new_state;
tg_pt_gp->tg_pt_gp_transition_complete = &wait;
- flush_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work);
+ flush_work(&tg_pt_gp->tg_pt_gp_transition_work);
wait_for_completion(&wait);
tg_pt_gp->tg_pt_gp_transition_complete = NULL;
return 0;
@@ -1114,15 +1113,9 @@ static int core_alua_do_transition_tg_pt
atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt);
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
- if (!explicit && tg_pt_gp->tg_pt_gp_implicit_trans_secs) {
- unsigned long transition_tmo;
-
- transition_tmo = tg_pt_gp->tg_pt_gp_implicit_trans_secs * HZ;
- schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work,
- transition_tmo);
- } else {
+ schedule_work(&tg_pt_gp->tg_pt_gp_transition_work);
+ if (explicit) {
tg_pt_gp->tg_pt_gp_transition_complete = &wait;
- schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work, 0);
wait_for_completion(&wait);
tg_pt_gp->tg_pt_gp_transition_complete = NULL;
}
@@ -1690,8 +1683,8 @@ struct t10_alua_tg_pt_gp *core_alua_allo
mutex_init(&tg_pt_gp->tg_pt_gp_md_mutex);
spin_lock_init(&tg_pt_gp->tg_pt_gp_lock);
atomic_set(&tg_pt_gp->tg_pt_gp_ref_cnt, 0);
- INIT_DELAYED_WORK(&tg_pt_gp->tg_pt_gp_transition_work,
- core_alua_do_transition_tg_pt_work);
+ INIT_WORK(&tg_pt_gp->tg_pt_gp_transition_work,
+ core_alua_do_transition_tg_pt_work);
tg_pt_gp->tg_pt_gp_dev = dev;
atomic_set(&tg_pt_gp->tg_pt_gp_alua_access_state,
ALUA_ACCESS_STATE_ACTIVE_OPTIMIZED);
@@ -1799,7 +1792,7 @@ void core_alua_free_tg_pt_gp(
dev->t10_alua.alua_tg_pt_gps_counter--;
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
- flush_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work);
+ flush_work(&tg_pt_gp->tg_pt_gp_transition_work);
/*
* Allow a struct t10_alua_tg_pt_gp_member * referenced by
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -297,7 +297,7 @@ struct t10_alua_tg_pt_gp {
struct list_head tg_pt_gp_lun_list;
struct se_lun *tg_pt_gp_alua_lun;
struct se_node_acl *tg_pt_gp_alua_nacl;
- struct delayed_work tg_pt_gp_transition_work;
+ struct work_struct tg_pt_gp_transition_work;
struct completion *tg_pt_gp_transition_complete;
};
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
[ Upstream commit 39b4954c0a1556f8f7f1fdcf59a227117fcd8a0b ]
MD's rdev_set_badblocks() expects that badblocks_set() returns 1 if
badblocks are disabled, otherwise, rdev_set_badblocks() will record
superblock changes and return success in that case and md will fail to
report an IO error which it should.
This bug has existed since badblocks were introduced in commit
9e0e252a048b ("badblocks: Add core badblock management code").
Signed-off-by: Liu Bo <[email protected]>
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/badblocks.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/block/badblocks.c
+++ b/block/badblocks.c
@@ -178,7 +178,7 @@ int badblocks_set(struct badblocks *bb,
if (bb->shift < 0)
/* badblocks are disabled */
- return 0;
+ return 1;
if (bb->shift) {
/* round the start down, and the end up */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiang Yi <[email protected]>
[ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ]
The function fd_execute_unmap() in target_core_file.c calles
ret = file->f_op->fallocate(file, mode, pos, len);
Some filesystems implement fallocate() to return error if
length is zero (e.g. btrfs) but according to SCSI Block
Commands spec UNMAP should return success for zero length.
Signed-off-by: Jiang Yi <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_file.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -466,6 +466,10 @@ fd_execute_unmap(struct se_cmd *cmd, sec
struct inode *inode = file->f_mapping->host;
int ret;
+ if (!nolb) {
+ return 0;
+ }
+
if (cmd->se_dev->dev_attrib.pi_prot_type) {
ret = fd_do_prot_unmap(cmd, lba, nolb);
if (ret)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: tangwenji <[email protected]>
[ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ]
When is pr_reg->isid_present_at_reg is false,this function should return.
This fixes a regression originally introduced by:
commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5
Author: Andy Grover <[email protected]>
Date: Thu May 16 10:40:55 2013 -0700
target: Alter core_pr_dump_initiator_port for ease of use
Signed-off-by: tangwenji <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_pr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -56,8 +56,10 @@ void core_pr_dump_initiator_port(
char *buf,
u32 size)
{
- if (!pr_reg->isid_present_at_reg)
+ if (!pr_reg->isid_present_at_reg) {
buf[0] = '\0';
+ return;
+ }
snprintf(buf, size, ",i,0x%s", pr_reg->pr_reg_isid);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
[ Upstream commit cfe2b621bb18d86e93271febf8c6e37622da2d14 ]
Avoid that cmd->se_cmd.se_tfo is read after a command has already been
freed.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Mike Christie <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -841,6 +841,7 @@ static int iscsit_add_reject_from_cmd(
unsigned char *buf)
{
struct iscsi_conn *conn;
+ const bool do_put = cmd->se_cmd.se_tfo != NULL;
if (!cmd->conn) {
pr_err("cmd->conn is NULL for ITT: 0x%08x\n",
@@ -871,7 +872,7 @@ static int iscsit_add_reject_from_cmd(
* Perform the kref_put now if se_cmd has already been setup by
* scsit_setup_scsi_cmd()
*/
- if (cmd->se_cmd.se_tfo != NULL) {
+ if (do_put) {
pr_debug("iscsi reject: calling target_put_sess_cmd >>>>>>\n");
target_put_sess_cmd(&cmd->se_cmd);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markus Elfring <[email protected]>
[ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ]
Source code review for a specific software refactoring showed the need
for another correction because the error code "-1" was returned so far
if a call of the function "sony_call_snc_handle" failed here.
Thus assign the return value from these two function calls also to
the variable "err" and provide it in case of a failure.
Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw")
Suggested-by: Andy Shevchenko <[email protected]>
Link: https://lkml.org/lkml/2017/10/31/463
Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg@mail.gmail.com>
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/sony-laptop.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1660,17 +1660,19 @@ static int sony_nc_setup_rfkill(struct a
if (!rfk)
return -ENOMEM;
- if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) {
+ err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result);
+ if (err < 0) {
rfkill_destroy(rfk);
- return -1;
+ return err;
}
hwblock = !(result & 0x1);
- if (sony_call_snc_handle(sony_rfkill_handle,
- sony_rfkill_address[nc_type],
- &result) < 0) {
+ err = sony_call_snc_handle(sony_rfkill_handle,
+ sony_rfkill_address[nc_type],
+ &result);
+ if (err < 0) {
rfkill_destroy(rfk);
- return -1;
+ return err;
}
swblock = !(result & 0x2);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tina Ruchandani <[email protected]>
[ Upstream commit 8a79790bf0b7da216627ffb85f52cfb4adbf1e4e ]
get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs's vlocation record to use ktime_get_real_seconds() instead, for the
fields time_of_death and update_at.
Signed-off-by: Tina Ruchandani <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/callback.c | 7 ++++---
fs/afs/internal.h | 7 ++++---
fs/afs/server.c | 6 +++---
fs/afs/vlocation.c | 16 +++++++++-------
4 files changed, 20 insertions(+), 16 deletions(-)
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -362,7 +362,7 @@ static void afs_callback_updater(struct
{
struct afs_server *server;
struct afs_vnode *vnode, *xvnode;
- time_t now;
+ time64_t now;
long timeout;
int ret;
@@ -370,7 +370,7 @@ static void afs_callback_updater(struct
_enter("");
- now = get_seconds();
+ now = ktime_get_real_seconds();
/* find the first vnode to update */
spin_lock(&server->cb_lock);
@@ -424,7 +424,8 @@ static void afs_callback_updater(struct
/* and then reschedule */
_debug("reschedule");
- vnode->update_at = get_seconds() + afs_vnode_update_timeout;
+ vnode->update_at = ktime_get_real_seconds() +
+ afs_vnode_update_timeout;
spin_lock(&server->cb_lock);
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -11,6 +11,7 @@
#include <linux/compiler.h>
#include <linux/kernel.h>
+#include <linux/ktime.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/rxrpc.h>
@@ -245,7 +246,7 @@ struct afs_cache_vhash {
*/
struct afs_vlocation {
atomic_t usage;
- time_t time_of_death; /* time at which put reduced usage to 0 */
+ time64_t time_of_death; /* time at which put reduced usage to 0 */
struct list_head link; /* link in cell volume location list */
struct list_head grave; /* link in master graveyard list */
struct list_head update; /* link in master update list */
@@ -256,7 +257,7 @@ struct afs_vlocation {
struct afs_cache_vlocation vldb; /* volume information DB record */
struct afs_volume *vols[3]; /* volume access record pointer (index by type) */
wait_queue_head_t waitq; /* status change waitqueue */
- time_t update_at; /* time at which record should be updated */
+ time64_t update_at; /* time at which record should be updated */
spinlock_t lock; /* access lock */
afs_vlocation_state_t state; /* volume location state */
unsigned short upd_rej_cnt; /* ENOMEDIUM count during update */
@@ -269,7 +270,7 @@ struct afs_vlocation {
*/
struct afs_server {
atomic_t usage;
- time_t time_of_death; /* time at which put reduced usage to 0 */
+ time64_t time_of_death; /* time at which put reduced usage to 0 */
struct in_addr addr; /* server address */
struct afs_cell *cell; /* cell in which server resides */
struct list_head link; /* link in cell's server list */
--- a/fs/afs/server.c
+++ b/fs/afs/server.c
@@ -242,7 +242,7 @@ void afs_put_server(struct afs_server *s
spin_lock(&afs_server_graveyard_lock);
if (atomic_read(&server->usage) == 0) {
list_move_tail(&server->grave, &afs_server_graveyard);
- server->time_of_death = get_seconds();
+ server->time_of_death = ktime_get_real_seconds();
queue_delayed_work(afs_wq, &afs_server_reaper,
afs_server_timeout * HZ);
}
@@ -277,9 +277,9 @@ static void afs_reap_server(struct work_
LIST_HEAD(corpses);
struct afs_server *server;
unsigned long delay, expiry;
- time_t now;
+ time64_t now;
- now = get_seconds();
+ now = ktime_get_real_seconds();
spin_lock(&afs_server_graveyard_lock);
while (!list_empty(&afs_server_graveyard)) {
--- a/fs/afs/vlocation.c
+++ b/fs/afs/vlocation.c
@@ -340,7 +340,8 @@ static void afs_vlocation_queue_for_upda
struct afs_vlocation *xvl;
/* wait at least 10 minutes before updating... */
- vl->update_at = get_seconds() + afs_vlocation_update_timeout;
+ vl->update_at = ktime_get_real_seconds() +
+ afs_vlocation_update_timeout;
spin_lock(&afs_vlocation_updates_lock);
@@ -506,7 +507,7 @@ void afs_put_vlocation(struct afs_vlocat
if (atomic_read(&vl->usage) == 0) {
_debug("buried");
list_move_tail(&vl->grave, &afs_vlocation_graveyard);
- vl->time_of_death = get_seconds();
+ vl->time_of_death = ktime_get_real_seconds();
queue_delayed_work(afs_wq, &afs_vlocation_reap,
afs_vlocation_timeout * HZ);
@@ -543,11 +544,11 @@ static void afs_vlocation_reaper(struct
LIST_HEAD(corpses);
struct afs_vlocation *vl;
unsigned long delay, expiry;
- time_t now;
+ time64_t now;
_enter("");
- now = get_seconds();
+ now = ktime_get_real_seconds();
spin_lock(&afs_vlocation_graveyard_lock);
while (!list_empty(&afs_vlocation_graveyard)) {
@@ -622,13 +623,13 @@ static void afs_vlocation_updater(struct
{
struct afs_cache_vlocation vldb;
struct afs_vlocation *vl, *xvl;
- time_t now;
+ time64_t now;
long timeout;
int ret;
_enter("");
- now = get_seconds();
+ now = ktime_get_real_seconds();
/* find a record to update */
spin_lock(&afs_vlocation_updates_lock);
@@ -684,7 +685,8 @@ static void afs_vlocation_updater(struct
/* and then reschedule */
_debug("reschedule");
- vl->update_at = get_seconds() + afs_vlocation_update_timeout;
+ vl->update_at = ktime_get_real_seconds() +
+ afs_vlocation_update_timeout;
spin_lock(&afs_vlocation_updates_lock);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 58fed94dfb17e89556b5705f20f90e5b2971b6a1 ]
Flush outstanding writes in afs when an fd is closed. This is what NFS and
CIFS do.
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/file.c | 1 +
fs/afs/internal.h | 1 +
fs/afs/write.c | 14 ++++++++++++++
3 files changed, 16 insertions(+)
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -29,6 +29,7 @@ static int afs_readpages(struct file *fi
const struct file_operations afs_file_operations = {
.open = afs_open,
+ .flush = afs_flush,
.release = afs_release,
.llseek = generic_file_llseek,
.read_iter = generic_file_read_iter,
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -752,6 +752,7 @@ extern int afs_writepages(struct address
extern void afs_pages_written_back(struct afs_vnode *, struct afs_call *);
extern ssize_t afs_file_write(struct kiocb *, struct iov_iter *);
extern int afs_writeback_all(struct afs_vnode *);
+extern int afs_flush(struct file *, fl_owner_t);
extern int afs_fsync(struct file *, loff_t, loff_t, int);
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -736,6 +736,20 @@ out:
}
/*
+ * Flush out all outstanding writes on a file opened for writing when it is
+ * closed.
+ */
+int afs_flush(struct file *file, fl_owner_t id)
+{
+ _enter("");
+
+ if ((file->f_mode & FMODE_WRITE) == 0)
+ return 0;
+
+ return vfs_fsync(file, 0);
+}
+
+/*
* notification that a previously read-only page is about to become writable
* - if it returns an error, the caller will deliver a bus error signal
*/
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit bcd89270d93b7edebb5de5e5e7dca1a77a33496e ]
Servers may send a callback array that is the same size as
the FID array, or an empty array. If the callback count is
0, the code would attempt to read (fid_count * 12) bytes of
data, which would fail and result in an unmarshalling error.
This would lead to stale data for remotely modified files
or directories.
Store the callback array size in the internal afs_call
structure and use that to determine the amount of data to
read.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/cmservice.c | 11 +++++------
fs/afs/internal.h | 5 ++++-
2 files changed, 9 insertions(+), 7 deletions(-)
--- a/fs/afs/cmservice.c
+++ b/fs/afs/cmservice.c
@@ -168,7 +168,6 @@ static int afs_deliver_cb_callback(struc
struct afs_callback *cb;
struct afs_server *server;
__be32 *bp;
- u32 tmp;
int ret, loop;
_enter("{%u}", call->unmarshall);
@@ -230,9 +229,9 @@ static int afs_deliver_cb_callback(struc
if (ret < 0)
return ret;
- tmp = ntohl(call->tmp);
- _debug("CB count: %u", tmp);
- if (tmp != call->count && tmp != 0)
+ call->count2 = ntohl(call->tmp);
+ _debug("CB count: %u", call->count2);
+ if (call->count2 != call->count && call->count2 != 0)
return -EBADMSG;
call->offset = 0;
call->unmarshall++;
@@ -240,14 +239,14 @@ static int afs_deliver_cb_callback(struc
case 4:
_debug("extract CB array");
ret = afs_extract_data(call, call->buffer,
- call->count * 3 * 4, false);
+ call->count2 * 3 * 4, false);
if (ret < 0)
return ret;
_debug("unmarshall CB array");
cb = call->request;
bp = call->buffer;
- for (loop = call->count; loop > 0; loop--, cb++) {
+ for (loop = call->count2; loop > 0; loop--, cb++) {
cb->version = ntohl(*bp++);
cb->expiry = ntohl(*bp++);
cb->type = ntohl(*bp++);
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -105,7 +105,10 @@ struct afs_call {
unsigned request_size; /* size of request data */
unsigned reply_max; /* maximum size of reply */
unsigned first_offset; /* offset into mapping[first] */
- unsigned last_to; /* amount of mapping[last] */
+ union {
+ unsigned last_to; /* amount of mapping[last] */
+ unsigned count2; /* count used in unmarshalling */
+ };
unsigned char unmarshall; /* unmarshalling phase */
bool incoming; /* T if incoming call */
bool send_pages; /* T if data from mapping should be sent */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit 627f46943ff90bcc32ddeb675d881c043c6fa2ae ]
Mode bits for an afs file should not be enforced in the usual
way.
For files, the absence of user bits can restrict file access
with respect to what is granted by the server.
These bits apply regardless of the owner or the current uid; the
rest of the mode bits (group, other) are ignored.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/security.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -340,17 +340,22 @@ int afs_permission(struct inode *inode,
} else {
if (!(access & AFS_ACE_LOOKUP))
goto permission_denied;
+ if ((mask & MAY_EXEC) && !(inode->i_mode & S_IXUSR))
+ goto permission_denied;
if (mask & (MAY_EXEC | MAY_READ)) {
if (!(access & AFS_ACE_READ))
goto permission_denied;
+ if (!(inode->i_mode & S_IRUSR))
+ goto permission_denied;
} else if (mask & MAY_WRITE) {
if (!(access & AFS_ACE_WRITE))
goto permission_denied;
+ if (!(inode->i_mode & S_IWUSR))
+ goto permission_denied;
}
}
key_put(key);
- ret = generic_permission(inode, mask);
_leave(" = %d", ret);
return ret;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit 6186f0788b31f44affceeedc7b48eb10faea120d ]
The group was hard coded to GLOBAL_ROOT_GID; use the group
ID that was received from the server.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -70,7 +70,7 @@ static int afs_inode_map_status(struct a
set_nlink(inode, vnode->status.nlink);
inode->i_uid = vnode->status.owner;
- inode->i_gid = GLOBAL_ROOT_GID;
+ inode->i_gid = vnode->status.group;
inode->i_size = vnode->status.size;
inode->i_ctime.tv_sec = vnode->status.mtime_server;
inode->i_ctime.tv_nsec = 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit ac831a379d34109451b3c41a44a20ee10ecb615f ]
Dan's static analysis says:
drivers/video/fbdev/controlfb.c:560 control_setup()
error: buffer overflow 'control_mac_modes' 20 <= 21
Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22,
which may lead to an out of bounds read when parsing vmode commandline
options.
The bug was introduced in v2.4.5.6, when 2 new modes were added to
macmodes.h, but control_mac_modes[] wasn't updated:
https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad
Augment control_mac_modes[] with the two new video modes to fix this.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/controlfb.h | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/video/fbdev/controlfb.h
+++ b/drivers/video/fbdev/controlfb.h
@@ -141,5 +141,7 @@ static struct max_cmodes control_mac_mod
{{ 1, 2}}, /* 1152x870, 75Hz */
{{ 0, 1}}, /* 1280x960, 75Hz */
{{ 0, 1}}, /* 1280x1024, 75Hz */
+ {{ 1, 2}}, /* 1152x768, 60Hz */
+ {{ 0, 1}}, /* 1600x1024, 60Hz */
};
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dou Liyang <[email protected]>
[ Upstream commit c962cff17dfa11f4a8227ac16de2b28aea3312e4 ]
Revert: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting")
The mapping of "cpuid <-> nodeid" is established at boot time via ACPI
tables to keep associations of workqueues and other node related items
consistent across cpu hotplug.
But, ACPI tables are unreliable and failures with that boot time mapping
have been reported on machines where the ACPI table and the physical
information which is retrieved at actual hotplug is inconsistent.
Revert the mapping implementation so it can be replaced with a less error
prone approach.
Signed-off-by: Dou Liyang <[email protected]>
Tested-by: Xiaolong Ye <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/acpi/boot.c | 2 -
drivers/acpi/acpi_processor.c | 5 --
drivers/acpi/bus.c | 1
drivers/acpi/processor_core.c | 73 ------------------------------------------
include/linux/acpi.h | 3 -
5 files changed, 1 insertion(+), 83 deletions(-)
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -720,7 +720,7 @@ static void __init acpi_set_irq_model_io
#ifdef CONFIG_ACPI_HOTPLUG_CPU
#include <acpi/processor.h>
-int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
{
#ifdef CONFIG_ACPI_NUMA
int nid;
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -182,11 +182,6 @@ int __weak arch_register_cpu(int cpu)
void __weak arch_unregister_cpu(int cpu) {}
-int __weak acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
-{
- return -ENODEV;
-}
-
static int acpi_processor_hotadd_init(struct acpi_processor *pr)
{
unsigned long long sta;
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1197,7 +1197,6 @@ static int __init acpi_init(void)
acpi_wakeup_device_init();
acpi_debugger_init();
acpi_setup_sb_notify_handler();
- acpi_set_processor_mapping();
return 0;
}
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -280,79 +280,6 @@ int acpi_get_cpuid(acpi_handle handle, i
}
EXPORT_SYMBOL_GPL(acpi_get_cpuid);
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-static bool __init
-map_processor(acpi_handle handle, phys_cpuid_t *phys_id, int *cpuid)
-{
- int type, id;
- u32 acpi_id;
- acpi_status status;
- acpi_object_type acpi_type;
- unsigned long long tmp;
- union acpi_object object = { 0 };
- struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
-
- status = acpi_get_type(handle, &acpi_type);
- if (ACPI_FAILURE(status))
- return false;
-
- switch (acpi_type) {
- case ACPI_TYPE_PROCESSOR:
- status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status))
- return false;
- acpi_id = object.processor.proc_id;
-
- /* validate the acpi_id */
- if(acpi_processor_validate_proc_id(acpi_id))
- return false;
- break;
- case ACPI_TYPE_DEVICE:
- status = acpi_evaluate_integer(handle, "_UID", NULL, &tmp);
- if (ACPI_FAILURE(status))
- return false;
- acpi_id = tmp;
- break;
- default:
- return false;
- }
-
- type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
-
- *phys_id = __acpi_get_phys_id(handle, type, acpi_id, false);
- id = acpi_map_cpuid(*phys_id, acpi_id);
-
- if (id < 0)
- return false;
- *cpuid = id;
- return true;
-}
-
-static acpi_status __init
-set_processor_node_mapping(acpi_handle handle, u32 lvl, void *context,
- void **rv)
-{
- phys_cpuid_t phys_id;
- int cpu_id;
-
- if (!map_processor(handle, &phys_id, &cpu_id))
- return AE_ERROR;
-
- acpi_map_cpu2node(handle, cpu_id, phys_id);
- return AE_OK;
-}
-
-void __init acpi_set_processor_mapping(void)
-{
- /* Set persistent cpu <-> node mapping for all processors. */
- acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, set_processor_node_mapping,
- NULL, NULL, NULL);
-}
-#else
-void __init acpi_set_processor_mapping(void) {}
-#endif /* CONFIG_ACPI_HOTPLUG_CPU */
-
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
static int get_ioapic_id(struct acpi_subtable_header *entry, u32 gsi_base,
u64 *phys_addr, int *ioapic_id)
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -276,11 +276,8 @@ bool acpi_processor_validate_proc_id(int
/* Arch dependent functions for cpu hotplug support */
int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu);
int acpi_unmap_cpu(int cpu);
-int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
-void acpi_set_processor_mapping(void);
-
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr);
#endif
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 29c8bbbd6e21daa0997d1c3ee886b897ee7ad652 ]
In afs_writepages_region(), inside the loop where we find dirty pages to
deal with, one of the if-statements is missing a put_page().
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/write.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -502,6 +502,7 @@ static int afs_writepages_region(struct
if (PageWriteback(page) || !PageDirty(page)) {
unlock_page(page);
+ put_page(page);
continue;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Morgenstein <[email protected]>
[ Upstream commit 4cbe4dac82e423ecc9a0ba46af24a860853259f4 ]
Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.
In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.
For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.
The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).
The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.
This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.
Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: Jack Morgenstein <[email protected]>
Reported-by: Simon Xiao <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/cmd.c | 11 +++++++++++
drivers/net/ethernet/mellanox/mlx4/main.c | 11 +++++++++++
include/linux/mlx4/device.h | 1 +
3 files changed, 23 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2304,6 +2304,17 @@ static int sync_toggles(struct mlx4_dev
rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read));
if (wr_toggle == 0xffffffff || rd_toggle == 0xffffffff) {
/* PCI might be offline */
+
+ /* If device removal has been requested,
+ * do not continue retrying.
+ */
+ if (dev->persist->interface_state &
+ MLX4_INTERFACE_STATE_NOWAIT) {
+ mlx4_warn(dev,
+ "communication channel is offline\n");
+ return -EIO;
+ }
+
msleep(100);
wr_toggle = swab32(readl(&priv->mfunc.comm->
slave_write));
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1940,6 +1940,14 @@ static int mlx4_comm_check_offline(struc
(u32)(1 << COMM_CHAN_OFFLINE_OFFSET));
if (!offline_bit)
return 0;
+
+ /* If device removal has been requested,
+ * do not continue retrying.
+ */
+ if (dev->persist->interface_state &
+ MLX4_INTERFACE_STATE_NOWAIT)
+ break;
+
/* There are cases as part of AER/Reset flow that PF needs
* around 100 msec to load. We therefore sleep for 100 msec
* to allow other tasks to make use of that CPU during this
@@ -3954,6 +3962,9 @@ static void mlx4_remove_one(struct pci_d
struct devlink *devlink = priv_to_devlink(priv);
int active_vfs = 0;
+ if (mlx4_is_slave(dev))
+ persist->interface_state |= MLX4_INTERFACE_STATE_NOWAIT;
+
mutex_lock(&persist->interface_state_mutex);
persist->interface_state |= MLX4_INTERFACE_STATE_DELETION;
mutex_unlock(&persist->interface_state_mutex);
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -476,6 +476,7 @@ enum {
enum {
MLX4_INTERFACE_STATE_UP = 1 << 0,
MLX4_INTERFACE_STATE_DELETION = 1 << 1,
+ MLX4_INTERFACE_STATE_NOWAIT = 1 << 2,
};
#define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Drake <[email protected]>
[ Upstream commit 822f5845f710e57d7e2df1fd1ee00d6e19d334fe ]
The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both
log 2 error messages during boot:
efi: requested map not found.
esrt: ESRT header is not in the memory map.
Searching the web, this seems to affect many other platforms too.
Since these messages are logged as errors, they appear on-screen during
the boot process even when using the "quiet" boot parameter used by
distros.
Demote the ESRT error to a warning so that it does not appear on-screen,
and delete the error logging from efi_mem_desc_lookup; both callsites
of that function log more specific messages upon failure.
Out of curiosity I looked closer at the Weibu F3C. There is no entry in
the UEFI-provided memory map which corresponds to the ESRT pointer, but
hacking the code to map it anyway, the ESRT does appear to be valid with
2 entries.
Signed-off-by: Daniel Drake <[email protected]>
Cc: Matt Fleming <[email protected]>
Acked-by: Peter Jones <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/efi.c | 1 -
drivers/firmware/efi/esrt.c | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -384,7 +384,6 @@ int __init efi_mem_desc_lookup(u64 phys_
return 0;
}
}
- pr_err_once("requested map not found.\n");
return -ENOENT;
}
--- a/drivers/firmware/efi/esrt.c
+++ b/drivers/firmware/efi/esrt.c
@@ -251,7 +251,7 @@ void __init efi_esrt_init(void)
rc = efi_mem_desc_lookup(efi.esrt, &md);
if (rc < 0) {
- pr_err("ESRT header is not in the memory map.\n");
+ pr_warn("ESRT header is not in the memory map.\n");
return;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Vyukov <[email protected]>
[ Upstream commit a4a3e061149f09c075f108b6f1cf04d9739a6bc2 ]
tty_ldisc_ref_wait() checks tty->ldisc under tty->ldisc_sem.
But if ldisc==NULL it releases them sem and reloads
tty->ldisc without holding the sem. This is wrong and
can lead to returning non-NULL ldisc without protection.
Don't reload tty->ldisc second time.
Signed-off-by: Dmitry Vyukov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Peter Hurley <[email protected]>
Cc: One Thousand Gnomes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/tty_ldisc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -271,10 +271,13 @@ const struct file_operations tty_ldiscs_
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
+ struct tty_ldisc *ld;
+
ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT);
- if (!tty->ldisc)
+ ld = tty->ldisc;
+ if (!ld)
ldsem_up_read(&tty->ldisc_sem);
- return tty->ldisc;
+ return ld;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zygo Blaxell <[email protected]>
[ Upstream commit e1699d2d7bf6e6cce3e1baff19f9dd4595a58664 ]
This is a story about 4 distinct (and very old) btrfs bugs.
Commit c8b978188c ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).
Commit 93c82d5750 ("Btrfs: zero page past end of inline file items")
fixed bug #1: uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read. The fix
was to add a memset in btrfs_get_extent to zero out the hole.
Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption")
fixed bug #2: compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases. This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.
There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record. This memset doesn't cover the region between the end of the
decompressed data and the end of the page. It has also moved around a
few times over the years, so there's no single patch to refer to.
This patch fixes bug #3: compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same: zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.
The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern. Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code. In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.
A fast reproducer for bug #0 is presented below. A few offending extents
are also created in the wild during large rsync transfers with the -S
flag. A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well. Once an offending
file is created, it can present different content to userspace each
time it is read.
Bug #0 is at least 4 and possibly 8 years old. I verified every vX.Y
kernel back to v3.5 has this behavior. There are fossil records of this
bug's effects in commits all the way back to v2.6.32. I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.
It is not clear whether bug #0 is worth fixing. A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.
Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak. So enough about
bug #0, let's get back to bug #3 (this patch).
An example of on-disk structure leading to data corruption found in
the wild:
item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
inode generation 50 transid 50 size 47424 nbytes 49141
block group 0 mode 100644 links 1 uid 0 gid 0
rdev 0 flags 0x0(none)
item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
inode ref index 3 namelen 10 name: DB_File.so
item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
inline extent data size 1341 ram 4085 compress(zlib)
item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
extent data disk byte 5367308288 nr 20480
extent data offset 0 nr 45056 ram 45056
extent compression(zlib)
Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096. The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.
Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:
Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:
# touch foo
# chattr +c foo
# xfs_io -f -c "pwrite -W 0 1000" foo
# xfs_io -f -c "falloc 4 8188" foo
# od -x foo
# echo 3 >/proc/sys/vm/drop_caches
# od -x foo
This produce the following on my box:
Correct output: file contains 1000 data bytes followed
by zeros:
0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
0001760 0000 0000 0000 0000 0000 0000 0000 0000
*
0020000
Actual output: the data after the first 1000 bytes
will be different each run:
0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
*
0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
(...)
Signed-off-by: Zygo Blaxell <[email protected]>
Reviewed-by: Liu Bo <[email protected]>
Reviewed-by: Chris Mason <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6812,6 +6812,20 @@ static noinline int uncompress_inline(st
max_size = min_t(unsigned long, PAGE_SIZE, max_size);
ret = btrfs_decompress(compress_type, tmp, page,
extent_offset, inline_size, max_size);
+
+ /*
+ * decompression code contains a memset to fill in any space between the end
+ * of the uncompressed data and the end of max_size in case the decompressed
+ * data ends up shorter than ram_bytes. That doesn't cover the hole between
+ * the end of an inline extent and the beginning of the next block, so we
+ * cover that region here.
+ */
+
+ if (max_size + pg_offset < PAGE_SIZE) {
+ char *map = kmap(page);
+ memset(map + pg_offset + max_size, 0, PAGE_SIZE - max_size - pg_offset);
+ kunmap(page);
+ }
kfree(tmp);
return ret;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Vyukov <[email protected]>
[ Upstream commit 5362544bebe85071188dd9e479b5a5040841c895 ]
If tty_ldisc_open() fails in tty_set_ldisc(), it tries to go back
to the old discipline or N_TTY. But that can fail as well, in such
case it panics. This is not a graceful way to handle OOM.
Leave ldisc==NULL if all attempts fail instead.
Also use existing tty_ldisc_reinit() helper function instead of
tty_ldisc_restore(). Also don't WARN/BUG in tty_ldisc_reinit()
if N_TTY fails, which would have the same net effect of bringing
kernel down on OOM. Instead print a single line message about
what has happened.
Signed-off-by: Dmitry Vyukov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Peter Hurley <[email protected]>
Cc: One Thousand Gnomes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/tty_ldisc.c | 85 +++++++++---------------------------------------
1 file changed, 16 insertions(+), 69 deletions(-)
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -489,41 +489,6 @@ static void tty_ldisc_close(struct tty_s
}
/**
- * tty_ldisc_restore - helper for tty ldisc change
- * @tty: tty to recover
- * @old: previous ldisc
- *
- * Restore the previous line discipline or N_TTY when a line discipline
- * change fails due to an open error
- */
-
-static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
-{
- struct tty_ldisc *new_ldisc;
- int r;
-
- /* There is an outstanding reference here so this is safe */
- old = tty_ldisc_get(tty, old->ops->num);
- WARN_ON(IS_ERR(old));
- tty->ldisc = old;
- tty_set_termios_ldisc(tty, old->ops->num);
- if (tty_ldisc_open(tty, old) < 0) {
- tty_ldisc_put(old);
- /* This driver is always present */
- new_ldisc = tty_ldisc_get(tty, N_TTY);
- if (IS_ERR(new_ldisc))
- panic("n_tty: get");
- tty->ldisc = new_ldisc;
- tty_set_termios_ldisc(tty, N_TTY);
- r = tty_ldisc_open(tty, new_ldisc);
- if (r < 0)
- panic("Couldn't open N_TTY ldisc for "
- "%s --- error %d.",
- tty_name(tty), r);
- }
-}
-
-/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
@@ -536,12 +501,7 @@ static void tty_ldisc_restore(struct tty
int tty_set_ldisc(struct tty_struct *tty, int disc)
{
- int retval;
- struct tty_ldisc *old_ldisc, *new_ldisc;
-
- new_ldisc = tty_ldisc_get(tty, disc);
- if (IS_ERR(new_ldisc))
- return PTR_ERR(new_ldisc);
+ int retval, old_disc;
tty_lock(tty);
retval = tty_ldisc_lock(tty, 5 * HZ);
@@ -554,7 +514,8 @@ int tty_set_ldisc(struct tty_struct *tty
}
/* Check the no-op case */
- if (tty->ldisc->ops->num == disc)
+ old_disc = tty->ldisc->ops->num;
+ if (old_disc == disc)
goto out;
if (test_bit(TTY_HUPPED, &tty->flags)) {
@@ -563,34 +524,25 @@ int tty_set_ldisc(struct tty_struct *tty
goto out;
}
- old_ldisc = tty->ldisc;
-
- /* Shutdown the old discipline. */
- tty_ldisc_close(tty, old_ldisc);
-
- /* Now set up the new line discipline. */
- tty->ldisc = new_ldisc;
- tty_set_termios_ldisc(tty, disc);
-
- retval = tty_ldisc_open(tty, new_ldisc);
+ retval = tty_ldisc_reinit(tty, disc);
if (retval < 0) {
/* Back to the old one or N_TTY if we can't */
- tty_ldisc_put(new_ldisc);
- tty_ldisc_restore(tty, old_ldisc);
+ if (tty_ldisc_reinit(tty, old_disc) < 0) {
+ pr_err("tty: TIOCSETD failed, reinitializing N_TTY\n");
+ if (tty_ldisc_reinit(tty, N_TTY) < 0) {
+ /* At this point we have tty->ldisc == NULL. */
+ pr_err("tty: reinitializing N_TTY failed\n");
+ }
+ }
}
- if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc) {
+ if (tty->ldisc && tty->ldisc->ops->num != old_disc &&
+ tty->ops->set_ldisc) {
down_read(&tty->termios_rwsem);
tty->ops->set_ldisc(tty);
up_read(&tty->termios_rwsem);
}
- /* At this point we hold a reference to the new ldisc and a
- reference to the old ldisc, or we hold two references to
- the old ldisc (if it was restored as part of error cleanup
- above). In either case, releasing a single reference from
- the old ldisc is correct. */
- new_ldisc = old_ldisc;
out:
tty_ldisc_unlock(tty);
@@ -598,7 +550,6 @@ out:
already running */
tty_buffer_restart_work(tty->port);
err:
- tty_ldisc_put(new_ldisc); /* drop the extra reference */
tty_unlock(tty);
return retval;
}
@@ -659,10 +610,8 @@ int tty_ldisc_reinit(struct tty_struct *
int retval;
ld = tty_ldisc_get(tty, disc);
- if (IS_ERR(ld)) {
- BUG_ON(disc == N_TTY);
+ if (IS_ERR(ld))
return PTR_ERR(ld);
- }
if (tty->ldisc) {
tty_ldisc_close(tty, tty->ldisc);
@@ -674,10 +623,8 @@ int tty_ldisc_reinit(struct tty_struct *
tty_set_termios_ldisc(tty, disc);
retval = tty_ldisc_open(tty, tty->ldisc);
if (retval) {
- if (!WARN_ON(disc == N_TTY)) {
- tty_ldisc_put(tty->ldisc);
- tty->ldisc = NULL;
- }
+ tty_ldisc_put(tty->ldisc);
+ tty->ldisc = NULL;
}
return retval;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 4d4a6ac73e7466c2085c307fac41f74ce4568a45 ]
If we receive a BUSY packet for a call we think we've just completed, the
packet is handed off to the connection processor to deal with - but the
connection processor doesn't expect a BUSY packet and so flags a protocol
error.
Fix this by simply ignoring the BUSY packet for the moment.
The symptom of this may appear as a system call failing with EPROTO. This
may be triggered by pressing ctrl-C under some circumstances.
This comes about we abort calls due to interruption by a signal (which we
shouldn't do, but that's going to be a large fix and mostly in fs/afs/).
What happens is that we abort the call and may also abort follow up calls
too (this needs offloading somehoe). So we see a transmission of something
like the following sequence of packets:
DATA for call N
ABORT call N
DATA for call N+1
ABORT call N+1
in very quick succession on the same channel. However, the peer may have
deferred the processing of the ABORT from the call N to a background thread
and thus sees the DATA message from the call N+1 coming in before it has
cleared the channel. Thus it sends a BUSY packet[*].
[*] Note that some implementations (OpenAFS, for example) mark the BUSY
packet with one plus the callNumber of the call prior to call N.
Ordinarily, this would be call N, but there's no requirement for the
calls on a channel to be numbered strictly sequentially (the number is
required to increase).
This is wrong and means that the callNumber in the BUSY packet should
be ignored (it really ought to be N+1 since that's what it's in
response to).
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/conn_event.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/rxrpc/conn_event.c
+++ b/net/rxrpc/conn_event.c
@@ -275,6 +275,10 @@ static int rxrpc_process_event(struct rx
rxrpc_conn_retransmit_call(conn, skb);
return 0;
+ case RXRPC_PACKET_TYPE_BUSY:
+ /* Just ignore BUSY packets for now. */
+ return 0;
+
case RXRPC_PACKET_TYPE_ABORT:
if (skb_copy_bits(skb, sizeof(struct rxrpc_wire_header),
&wtmp, sizeof(wtmp)) < 0)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <[email protected]>
[ Upstream commit b25634e2a051bef4b2524b11adddfbfa6448f6cd ]
When handling a new recv command, we grab a new rsp resource and
check for the queue state being live. In case the queue is not in
live state, we simply restore the rsp back to the free list. However
in this flow we didn't set rsp->queue yet, so we cannot dereference it.
Instead, make sure to initialize rsp->queue (and other rsp members)
as soon as possible so we won't reference uninitialized variables.
Reported-by: Yi Zhang <[email protected]>
Reported-by: Raju Rangoju <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Tested-by: Raju Rangoju <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/target/rdma.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -703,11 +703,6 @@ static void nvmet_rdma_handle_command(st
{
u16 status;
- cmd->queue = queue;
- cmd->n_rdma = 0;
- cmd->req.port = queue->port;
-
-
ib_dma_sync_single_for_cpu(queue->dev->device,
cmd->cmd->sge[0].addr, cmd->cmd->sge[0].length,
DMA_FROM_DEVICE);
@@ -760,9 +755,12 @@ static void nvmet_rdma_recv_done(struct
cmd->queue = queue;
rsp = nvmet_rdma_get_rsp(queue);
+ rsp->queue = queue;
rsp->cmd = cmd;
rsp->flags = 0;
rsp->req.cmd = cmd->nvme_cmd;
+ rsp->req.port = queue->port;
+ rsp->n_rdma = 0;
if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) {
unsigned long flags;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
[ Upstream commit 66822d815ae61ecb2d9dba9031517e8a8476969d ]
Higher sclks seem to be unstable on some boards.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/si_dpm.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -3030,9 +3030,13 @@ static void si_apply_state_adjust_rules(
max_mclk = 80000;
}
} else if (rdev->family == CHIP_OLAND) {
- if ((rdev->pdev->device == 0x6604) &&
- (rdev->pdev->subsystem_vendor == 0x1028) &&
- (rdev->pdev->subsystem_device == 0x066F)) {
+ if ((rdev->pdev->revision == 0xC7) ||
+ (rdev->pdev->revision == 0x80) ||
+ (rdev->pdev->revision == 0x81) ||
+ (rdev->pdev->revision == 0x83) ||
+ (rdev->pdev->revision == 0x87) ||
+ (rdev->pdev->device == 0x6604) ||
+ (rdev->pdev->device == 0x6605)) {
max_sclk = 75000;
}
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <[email protected]>
[ Upstream commit d11ea004a458b982e19b188c386e25a9b66ec446 ]
percpu_ref_kill is not enough to prevent subsequent
percpu_ref_tryget_live from failing. Hence call
perfcpu_ref_kill_confirm to make it safe.
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/target/core.c | 11 ++++++++++-
drivers/nvme/target/nvmet.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -422,6 +422,13 @@ void nvmet_sq_setup(struct nvmet_ctrl *c
ctrl->sqs[qid] = sq;
}
+static void nvmet_confirm_sq(struct percpu_ref *ref)
+{
+ struct nvmet_sq *sq = container_of(ref, struct nvmet_sq, ref);
+
+ complete(&sq->confirm_done);
+}
+
void nvmet_sq_destroy(struct nvmet_sq *sq)
{
/*
@@ -430,7 +437,8 @@ void nvmet_sq_destroy(struct nvmet_sq *s
*/
if (sq->ctrl && sq->ctrl->sqs && sq->ctrl->sqs[0] == sq)
nvmet_async_events_free(sq->ctrl);
- percpu_ref_kill(&sq->ref);
+ percpu_ref_kill_and_confirm(&sq->ref, nvmet_confirm_sq);
+ wait_for_completion(&sq->confirm_done);
wait_for_completion(&sq->free_done);
percpu_ref_exit(&sq->ref);
@@ -458,6 +466,7 @@ int nvmet_sq_init(struct nvmet_sq *sq)
return ret;
}
init_completion(&sq->free_done);
+ init_completion(&sq->confirm_done);
return 0;
}
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -73,6 +73,7 @@ struct nvmet_sq {
u16 qid;
u16 size;
struct completion free_done;
+ struct completion confirm_done;
};
/**
On Mon, 2017-12-18 at 16:49 +0100, Greg Kroah-Hartman wrote:
> 4.9-stable review patch. If anyone has any objections, please let me know.
I am _very_ suspicious of any -stable patch by Markus Elfring.
Are you sure this is necessary and useful for -stable?
Does this actually fix something or does it merely reduce
object size a few bytes?
> ------------------
From: Markus Elfring <[email protected]>
[ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ]
Source code review for a specific software refactoring showed the need
for another correction because the error code "-1" was returned so far
if a call of the function "sony_call_snc_handle" failed here.
Thus assign the return value from these two function calls also to
the variable "err" and provide it in case of a failure.
Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw")
Suggested-by: Andy Shevchenko <[email protected]>
Link:https://lkml.org/lkml/2017/10/31/463 Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg@mail.gmail.com>;
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/sony-laptop.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1660,17 +1660,19 @@ static int sony_nc_setup_rfkill(struct a
if (!rfk)
return -ENOMEM;
- if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) {
+ err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result);
+ if (err < 0) {
rfkill_destroy(rfk);
- return -1;
+ return err;
}
hwblock = !(result & 0x1);
- if (sony_call_snc_handle(sony_rfkill_handle,
- sony_rfkill_address[nc_type],
- &result) < 0) {
+ err = sony_call_snc_handle(sony_rfkill_handle,
+ sony_rfkill_address[nc_type],
+ &result);
+ if (err < 0) {
rfkill_destroy(rfk);
- return -1;
+ return err;
}
swblock = !(result & 0x2);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 6d06b0d25209c80e99c1e89700f1e09694a3766b ]
afs_write_begin() leaks a ref and a lock on a page if afs_fill_page()
fails. Fix the leak by unlocking and releasing the page in the error path.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/write.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -148,12 +148,12 @@ int afs_write_begin(struct file *file, s
kfree(candidate);
return -ENOMEM;
}
- *pagep = page;
- /* page won't leak in error case: it eventually gets cleaned off LRU */
if (!PageUptodate(page) && len != PAGE_SIZE) {
ret = afs_fill_page(vnode, key, index << PAGE_SHIFT, page);
if (ret < 0) {
+ unlock_page(page);
+ put_page(page);
kfree(candidate);
_leave(" = %d [prep]", ret);
return ret;
@@ -161,6 +161,9 @@ int afs_write_begin(struct file *file, s
SetPageUptodate(page);
}
+ /* page won't leak in error case: it eventually gets cleaned off LRU */
+ *pagep = page;
+
try_again:
spin_lock(&vnode->writeback_lock);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
[ Upstream commit ab94f5d0dd6fd82e7eeca5e7c8096eaea0a0261f ]
The inode timestamps should be set from the client time
in the status received from the server, rather than the
server time which is meant for internal server use.
Set AFS_SET_MTIME and populate the mtime for operations
that take an input status, such as file/dir creation
and StoreData. If an input time is not provided the
server will set the vnode times based on the current server
time.
In a situation where the server has some skew with the
client, this could lead to the client seeing a timestamp
in the future for a file that it just created or wrote.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/fsclient.c | 18 +++++++++---------
fs/afs/inode.c | 2 +-
2 files changed, 10 insertions(+), 10 deletions(-)
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -105,7 +105,7 @@ static void xdr_decode_AFSFetchStatus(co
vnode->vfs_inode.i_mode = mode;
}
- vnode->vfs_inode.i_ctime.tv_sec = status->mtime_server;
+ vnode->vfs_inode.i_ctime.tv_sec = status->mtime_client;
vnode->vfs_inode.i_mtime = vnode->vfs_inode.i_ctime;
vnode->vfs_inode.i_atime = vnode->vfs_inode.i_ctime;
vnode->vfs_inode.i_version = data_version;
@@ -676,8 +676,8 @@ int afs_fs_create(struct afs_server *ser
memset(bp, 0, padsz);
bp = (void *) bp + padsz;
}
- *bp++ = htonl(AFS_SET_MODE);
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME);
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = htonl(mode & S_IALLUGO); /* unix mode */
@@ -945,8 +945,8 @@ int afs_fs_symlink(struct afs_server *se
memset(bp, 0, c_padsz);
bp = (void *) bp + c_padsz;
}
- *bp++ = htonl(AFS_SET_MODE);
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME);
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = htonl(S_IRWXUGO); /* unix mode */
@@ -1145,8 +1145,8 @@ static int afs_fs_store_data64(struct af
*bp++ = htonl(vnode->fid.vnode);
*bp++ = htonl(vnode->fid.unique);
- *bp++ = 0; /* mask */
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MTIME); /* mask */
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = 0; /* unix mode */
@@ -1222,8 +1222,8 @@ int afs_fs_store_data(struct afs_server
*bp++ = htonl(vnode->fid.vnode);
*bp++ = htonl(vnode->fid.unique);
- *bp++ = 0; /* mask */
- *bp++ = 0; /* mtime */
+ *bp++ = htonl(AFS_SET_MTIME); /* mask */
+ *bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
*bp++ = 0; /* owner */
*bp++ = 0; /* group */
*bp++ = 0; /* unix mode */
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -72,7 +72,7 @@ static int afs_inode_map_status(struct a
inode->i_uid = vnode->status.owner;
inode->i_gid = vnode->status.group;
inode->i_size = vnode->status.size;
- inode->i_ctime.tv_sec = vnode->status.mtime_server;
+ inode->i_ctime.tv_sec = vnode->status.mtime_client;
inode->i_ctime.tv_nsec = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime;
inode->i_blocks = 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 1157f153f37a8586765034470e4f00a4a6c4ce6f ]
When we are given an invalid operation ID, we should abort that with
RXGEN_OPCODE rather than RX_INVALID_OPERATION.
Also map RXGEN_OPCODE to -ENOTSUPP.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/afs/misc.c | 2 ++
fs/afs/rxrpc.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/fs/afs/misc.c
+++ b/fs/afs/misc.c
@@ -84,6 +84,8 @@ int afs_abort_to_error(u32 abort_code)
case RXKADDATALEN: return -EKEYREJECTED;
case RXKADILLEGALLEVEL: return -EKEYREJECTED;
+ case RXGEN_OPCODE: return -ENOTSUPP;
+
default: return -EREMOTEIO;
}
}
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -440,7 +440,7 @@ static void afs_deliver_to_call(struct a
abort_code, -ret, "KNC");
goto do_abort;
case -ENOTSUPP:
- abort_code = RX_INVALID_OPERATION;
+ abort_code = RXGEN_OPCODE;
rxrpc_kernel_abort_call(afs_socket, call->rxcall,
abort_code, -ret, "KIV");
goto do_abort;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit 7627409cc4970e8c8b9de6945ad86a575290a94e ]
Since the internal PHY is powered up during the open and resume
functions it should be powered back down if the functions fail.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2857,6 +2857,8 @@ err_irq0:
err_fini_dma:
bcmgenet_fini_dma(priv);
err_clk_disable:
+ if (priv->internal_phy)
+ bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
clk_disable_unprepare(priv->clk);
return ret;
}
@@ -3560,6 +3562,8 @@ static int bcmgenet_resume(struct device
return 0;
out_clk_disable:
+ if (priv->internal_phy)
+ bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
clk_disable_unprepare(priv->clk);
return ret;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleksandr Tyshchenko <[email protected]>
[ Upstream commit a03849e7210277fa212779b7cd9c30e1ab6194b2 ]
Do a check for already installed leaf entry at the current level before
dereferencing it in order to avoid walking the page table down with
wrong pointer to the next level.
Signed-off-by: Oleksandr Tyshchenko <[email protected]>
CC: Will Deacon <[email protected]>
CC: Robin Murphy <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/io-pgtable-arm-v7s.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -418,8 +418,12 @@ static int __arm_v7s_map(struct arm_v7s_
pte |= ARM_V7S_ATTR_NS_TABLE;
__arm_v7s_set_pte(ptep, pte, 1, cfg);
- } else {
+ } else if (ARM_V7S_PTE_IS_TABLE(pte, lvl)) {
cptep = iopte_deref(pte, lvl);
+ } else {
+ /* We require an unmap first */
+ WARN_ON(!selftest_running);
+ return -EEXIST;
}
/* Rinse, repeat */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 800a938f0bf9130c8256116649c0cc5806bfb2fd ]
If you write "-2 -3 -4" to the "versions" file, it will
notice that no versions are enabled, and nfsd_reset_versions()
is called.
This enables all major versions, not no minor versions.
So we lose the invariant that NFSv4 is only advertised when
at least one minor is enabled.
Fix the code to explicitly enable minor versions for v4,
change it to use nfsd_vers() to test and set, and simplify
the code.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfssvc.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -400,23 +400,20 @@ static void nfsd_last_thread(struct svc_
void nfsd_reset_versions(void)
{
- int found_one = 0;
int i;
- for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++) {
- if (nfsd_program.pg_vers[i])
- found_one = 1;
- }
+ for (i = 0; i < NFSD_NRVERS; i++)
+ if (nfsd_vers(i, NFSD_TEST))
+ return;
- if (!found_one) {
- for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++)
- nfsd_program.pg_vers[i] = nfsd_version[i];
-#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
- for (i = NFSD_ACL_MINVERS; i < NFSD_ACL_NRVERS; i++)
- nfsd_acl_program.pg_vers[i] =
- nfsd_acl_version[i];
-#endif
- }
+ for (i = 0; i < NFSD_NRVERS; i++)
+ if (i != 4)
+ nfsd_vers(i, NFSD_SET);
+ else {
+ int minor = 0;
+ while (nfsd_minorversion(minor, NFSD_SET) >= 0)
+ minor++;
+ }
}
/*
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Jurgens <[email protected]>
[ Upstream commit 5d47f6c89d568ab61712d8c40676fbb020b68752 ]
When a PCI error is detected the PCI state could be corrupt, don't save
it in that flow. Save the state after initialization. After restoring the
PCI state during slot reset save it again, restoring the state destroys
the previously saved state info.
Fixes: 05ac2c0b7438 ('net/mlx5: Fix race between PCI error handlers and
health work')
Signed-off-by: Daniel Jurgens <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1283,6 +1283,7 @@ static int init_one(struct pci_dev *pdev
if (err)
goto clean_load;
+ pci_save_state(pdev);
return 0;
clean_load:
@@ -1331,9 +1332,8 @@ static pci_ers_result_t mlx5_pci_err_det
mlx5_enter_error_state(dev);
mlx5_unload_one(dev, priv, false);
- /* In case of kernel call save the pci state and drain the health wq */
+ /* In case of kernel call drain the health wq */
if (state) {
- pci_save_state(pdev);
mlx5_drain_health_wq(dev);
mlx5_pci_disable_device(dev);
}
@@ -1385,6 +1385,7 @@ static pci_ers_result_t mlx5_pci_slot_re
pci_set_master(pdev);
pci_restore_state(pdev);
+ pci_save_state(pdev);
if (wait_vital(pdev)) {
dev_err(&pdev->dev, "%s: wait_vital timed out\n", __func__);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stafford Horne <[email protected]>
[ Upstream commit 154e67cd8e8f964809d0e75e44bb121b169c75b3 ]
Was getting the following error with allmodconfig:
ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!
This was simply a missing break statement, causing an unwanted fall
through.
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/openrisc/include/asm/uaccess.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/openrisc/include/asm/uaccess.h
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -211,7 +211,7 @@ do { \
case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break; \
case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \
case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \
- case 8: __get_user_asm2(x, ptr, retval); \
+ case 8: __get_user_asm2(x, ptr, retval); break; \
default: (x) = __get_user_bad(); \
} \
} while (0)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuninori Morimoto <[email protected]>
[ Upstream commit 62a10498afb27370ec6018e9d802b74850fd8d9a ]
R-Car datasheet indicates "Clear DE in PDMACHCR" for transfer stop,
but current code clears all bits in PDMACHCR.
Because of this, DE bit might never been cleared,
and it causes CMD overflow. This patch fixes this issue.
Signed-off-by: Kuninori Morimoto <[email protected]>
Tested-by: Hiroyuki Yokoyama <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/dma.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -361,6 +361,20 @@ static u32 rsnd_dmapp_read(struct rsnd_d
return ioread32(rsnd_dmapp_addr(dmac, dma, reg));
}
+static void rsnd_dmapp_bset(struct rsnd_dma *dma, u32 data, u32 mask, u32 reg)
+{
+ struct rsnd_mod *mod = rsnd_mod_get(dma);
+ struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
+ struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv);
+ volatile void __iomem *addr = rsnd_dmapp_addr(dmac, dma, reg);
+ u32 val = ioread32(addr);
+
+ val &= ~mask;
+ val |= (data & mask);
+
+ iowrite32(val, addr);
+}
+
static int rsnd_dmapp_stop(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
@@ -368,10 +382,10 @@ static int rsnd_dmapp_stop(struct rsnd_m
struct rsnd_dma *dma = rsnd_mod_to_dma(mod);
int i;
- rsnd_dmapp_write(dma, 0, PDMACHCR);
+ rsnd_dmapp_bset(dma, 0, PDMACHCR_DE, PDMACHCR);
for (i = 0; i < 1024; i++) {
- if (0 == rsnd_dmapp_read(dma, PDMACHCR))
+ if (0 == (rsnd_dmapp_read(dma, PDMACHCR) & PDMACHCR_DE))
return 0;
udelay(1);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Bristot de Oliveira <[email protected]>
[ Upstream commit df8eac8cafce7d086be3bd5cf5a838fa37594dfb ]
During the activation, CBS checks if it can reuse the current task's
runtime and period. If the deadline of the task is in the past, CBS
cannot use the runtime, and so it replenishes the task. This rule
works fine for implicit deadline tasks (deadline == period), and the
CBS was designed for implicit deadline tasks. However, a task with
constrained deadline (deadine < period) might be awakened after the
deadline, but before the next period. In this case, replenishing the
task would allow it to run for runtime / deadline. As in this case
deadline < period, CBS enables a task to run for more than the
runtime / period. In a very loaded system, this can cause a domino
effect, making other tasks miss their deadlines.
To avoid this problem, in the activation of a constrained deadline
task after the deadline but before the next period, throttle the
task and set the replenishing timer to the begin of the next period,
unless it is boosted.
Reproducer:
--------------- %< ---------------
int main (int argc, char **argv)
{
int ret;
int flags = 0;
unsigned long l = 0;
struct timespec ts;
struct sched_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
ts.tv_sec = 0;
ts.tv_nsec = 2000 * 1000; /* 2 ms */
ret = sched_setattr(0, &attr, flags);
if (ret < 0) {
perror("sched_setattr");
exit(-1);
}
for(;;) {
/* XXX: you may need to adjust the loop */
for (l = 0; l < 150000; l++);
/*
* The ideia is to go to sleep right before the deadline
* and then wake up before the next period to receive
* a new replenishment.
*/
nanosleep(&ts, NULL);
}
exit(0);
}
--------------- >% ---------------
On my box, this reproducer uses almost 50% of the CPU time, which is
obviously wrong for a task with 2/2000 reservation.
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Luca Abeni <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Romulo Silva de Oliveira <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tommaso Cucinotta <[email protected]>
Link: http://lkml.kernel.org/r/edf58354e01db46bf42df8d2dd32418833f68c89.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/deadline.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -695,6 +695,37 @@ void init_dl_task_timer(struct sched_dl_
timer->function = dl_task_timer;
}
+/*
+ * During the activation, CBS checks if it can reuse the current task's
+ * runtime and period. If the deadline of the task is in the past, CBS
+ * cannot use the runtime, and so it replenishes the task. This rule
+ * works fine for implicit deadline tasks (deadline == period), and the
+ * CBS was designed for implicit deadline tasks. However, a task with
+ * constrained deadline (deadine < period) might be awakened after the
+ * deadline, but before the next period. In this case, replenishing the
+ * task would allow it to run for runtime / deadline. As in this case
+ * deadline < period, CBS enables a task to run for more than the
+ * runtime / period. In a very loaded system, this can cause a domino
+ * effect, making other tasks miss their deadlines.
+ *
+ * To avoid this problem, in the activation of a constrained deadline
+ * task after the deadline but before the next period, throttle the
+ * task and set the replenishing timer to the begin of the next period,
+ * unless it is boosted.
+ */
+static inline void dl_check_constrained_dl(struct sched_dl_entity *dl_se)
+{
+ struct task_struct *p = dl_task_of(dl_se);
+ struct rq *rq = rq_of_dl_rq(dl_rq_of_se(dl_se));
+
+ if (dl_time_before(dl_se->deadline, rq_clock(rq)) &&
+ dl_time_before(rq_clock(rq), dl_next_period(dl_se))) {
+ if (unlikely(dl_se->dl_boosted || !start_dl_timer(p)))
+ return;
+ dl_se->dl_throttled = 1;
+ }
+}
+
static
int dl_runtime_exceeded(struct sched_dl_entity *dl_se)
{
@@ -928,6 +959,11 @@ static void dequeue_dl_entity(struct sch
__dequeue_dl_entity(dl_se);
}
+static inline bool dl_is_constrained(struct sched_dl_entity *dl_se)
+{
+ return dl_se->dl_deadline < dl_se->dl_period;
+}
+
static void enqueue_task_dl(struct rq *rq, struct task_struct *p, int flags)
{
struct task_struct *pi_task = rt_mutex_get_top_task(p);
@@ -954,6 +990,15 @@ static void enqueue_task_dl(struct rq *r
}
/*
+ * Check if a constrained deadline task was activated
+ * after the deadline but before the next period.
+ * If that is the case, the task will be throttled and
+ * the replenishment timer will be set to the next period.
+ */
+ if (!p->dl.dl_throttled && dl_is_constrained(&p->dl))
+ dl_check_constrained_dl(&p->dl);
+
+ /*
* If p is throttled, we do nothing. In fact, if it exhausted
* its budget it needs a replenishment and, since it now is on
* its rq, the bandwidth timer callback (which clearly has not
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sara Sharon <[email protected]>
[ Upstream commit 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ]
When a station is asleep, the fw will set it as "asleep".
All queues that are used only by one station will be stopped by
the fw.
In pre-DQA mode this was relevant for aggregation queues. However,
in DQA mode a queue is owned by one station only, so all queues
will be stopped.
As a result, we don't expect to get filtered frames back to
mac80211 and don't have to maintain the entire pending_frames
state logic, the same way as we do in aggregations.
The correct behavior is to align DQA behavior with the aggregation
queue behaviour pre-DQA:
- Don't count pending frames.
- Let mac80211 know we have frames in these queues so that it can
properly handle trigger frames.
When a trigger frame is received, mac80211 tells the driver to send
frames from the queues using release_buffered_frames.
The driver will tell the fw to let frames out even if the station
is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count.
Reported-and-tested-by: Jens Axboe <[email protected]>
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +-
drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 11 +++--
drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 -
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 41 +++++++++-------------
4 files changed, 28 insertions(+), 31 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -2320,7 +2320,7 @@ iwl_mvm_mac_release_buffered_frames(stru
{
struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
- /* Called when we need to transmit (a) frame(s) from agg queue */
+ /* Called when we need to transmit (a) frame(s) from agg or dqa queue */
iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames,
tids, more_data, true);
@@ -2340,7 +2340,8 @@ static void iwl_mvm_mac_sta_notify(struc
for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) {
struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
- if (tid_data->state != IWL_AGG_ON &&
+ if (!iwl_mvm_is_dqa_supported(mvm) &&
+ tid_data->state != IWL_AGG_ON &&
tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA)
continue;
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -3032,7 +3032,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
struct ieee80211_sta *sta,
enum ieee80211_frame_release_type reason,
u16 cnt, u16 tids, bool more_data,
- bool agg)
+ bool single_sta_queue)
{
struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
struct iwl_mvm_add_sta_cmd cmd = {
@@ -3052,14 +3052,14 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT)
cmd.awake_acs |= BIT(tid_to_ucode_ac[tid]);
- /* If we're releasing frames from aggregation queues then check if the
- * all queues combined that we're releasing frames from have
+ /* If we're releasing frames from aggregation or dqa queues then check
+ * if all the queues that we're releasing frames from, combined, have:
* - more frames than the service period, in which case more_data
* needs to be set
* - fewer than 'cnt' frames, in which case we need to adjust the
* firmware command (but do that unconditionally)
*/
- if (agg) {
+ if (single_sta_queue) {
int remaining = cnt;
int sleep_tx_count;
@@ -3069,7 +3069,8 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
u16 n_queued;
tid_data = &mvmsta->tid_data[tid];
- if (WARN(tid_data->state != IWL_AGG_ON &&
+ if (WARN(!iwl_mvm_is_dqa_supported(mvm) &&
+ tid_data->state != IWL_AGG_ON &&
tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA,
"TID %d state is %d\n",
tid, tid_data->state)) {
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
@@ -545,7 +545,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
struct ieee80211_sta *sta,
enum ieee80211_frame_release_type reason,
u16 cnt, u16 tids, bool more_data,
- bool agg);
+ bool single_sta_queue);
int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
bool drain);
void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm,
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -7,7 +7,7 @@
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * Copyright(c) 2016 Intel Deutschland GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -34,6 +34,7 @@
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -621,8 +622,10 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mv
* values.
* Note that we don't need to make sure it isn't agg'd, since we're
* TXing non-sta
+ * For DQA mode - we shouldn't increase it though
*/
- atomic_inc(&mvm->pending_frames[sta_id]);
+ if (!iwl_mvm_is_dqa_supported(mvm))
+ atomic_inc(&mvm->pending_frames[sta_id]);
return 0;
}
@@ -1009,11 +1012,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mv
spin_unlock(&mvmsta->lock);
- /* Increase pending frames count if this isn't AMPDU */
- if ((iwl_mvm_is_dqa_supported(mvm) &&
- mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_ON &&
- mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_STARTING) ||
- (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu))
+ /* Increase pending frames count if this isn't AMPDU or DQA queue */
+ if (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu)
atomic_inc(&mvm->pending_frames[mvmsta->sta_id]);
return 0;
@@ -1083,12 +1083,13 @@ static void iwl_mvm_check_ratid_empty(st
lockdep_assert_held(&mvmsta->lock);
if ((tid_data->state == IWL_AGG_ON ||
- tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA) &&
+ tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA ||
+ iwl_mvm_is_dqa_supported(mvm)) &&
iwl_mvm_tid_queued(tid_data) == 0) {
/*
- * Now that this aggregation queue is empty tell mac80211 so it
- * knows we no longer have frames buffered for the station on
- * this TID (for the TIM bitmap calculation.)
+ * Now that this aggregation or DQA queue is empty tell
+ * mac80211 so it knows we no longer have frames buffered for
+ * the station on this TID (for the TIM bitmap calculation.)
*/
ieee80211_sta_set_buffered(sta, tid, false);
}
@@ -1261,7 +1262,6 @@ static void iwl_mvm_rx_tx_cmd_single(str
u8 skb_freed = 0;
u16 next_reclaimed, seq_ctl;
bool is_ndp = false;
- bool txq_agg = false; /* Is this TXQ aggregated */
__skb_queue_head_init(&skbs);
@@ -1287,6 +1287,10 @@ static void iwl_mvm_rx_tx_cmd_single(str
info->flags |= IEEE80211_TX_STAT_ACK;
break;
case TX_STATUS_FAIL_DEST_PS:
+ /* In DQA, the FW should have stopped the queue and not
+ * return this status
+ */
+ WARN_ON(iwl_mvm_is_dqa_supported(mvm));
info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
break;
default:
@@ -1391,15 +1395,6 @@ static void iwl_mvm_rx_tx_cmd_single(str
bool send_eosp_ndp = false;
spin_lock_bh(&mvmsta->lock);
- if (iwl_mvm_is_dqa_supported(mvm)) {
- enum iwl_mvm_agg_state state;
-
- state = mvmsta->tid_data[tid].state;
- txq_agg = (state == IWL_AGG_ON ||
- state == IWL_EMPTYING_HW_QUEUE_DELBA);
- } else {
- txq_agg = txq_id >= mvm->first_agg_queue;
- }
if (!is_ndp) {
tid_data->next_reclaimed = next_reclaimed;
@@ -1456,11 +1451,11 @@ static void iwl_mvm_rx_tx_cmd_single(str
* If the txq is not an AMPDU queue, there is no chance we freed
* several skbs. Check that out...
*/
- if (txq_agg)
+ if (iwl_mvm_is_dqa_supported(mvm) || txq_id >= mvm->first_agg_queue)
goto out;
/* We can't free more than one frame at once on a shared queue */
- WARN_ON(!iwl_mvm_is_dqa_supported(mvm) && (skb_freed > 1));
+ WARN_ON(skb_freed > 1);
/* If we have still frames for this STA nothing to do here */
if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id]))
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Don Brace <[email protected]>
[ Upstream commit 2ef2884980873081a4edae92f9d88dd580c85f6e ]
Resets can take longer than DEFAULT_TIMEOUT.
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hpsa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2951,7 +2951,7 @@ static int hpsa_send_reset(struct ctlr_i
/* fill_cmd can't fail here, no data buffer to map. */
(void) fill_cmd(c, reset_type, h, NULL, 0, 0,
scsi3addr, TYPE_MSG);
- rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
+ rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
if (rc) {
dev_warn(&h->pdev->dev, "Failed to send reset command\n");
goto out;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Don Brace <[email protected]>
[ Upstream commit 87b9e6aa87d9411f1059aa245c0c79976bc557ac ]
Avoid rescan storms. No need to queue another if one is pending.
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hpsa.c | 16 +++++++++++++++-
drivers/scsi/hpsa.h | 1 +
2 files changed, 16 insertions(+), 1 deletion(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5529,7 +5529,7 @@ static void hpsa_scan_complete(struct ct
spin_lock_irqsave(&h->scan_lock, flags);
h->scan_finished = 1;
- wake_up_all(&h->scan_wait_queue);
+ wake_up(&h->scan_wait_queue);
spin_unlock_irqrestore(&h->scan_lock, flags);
}
@@ -5547,11 +5547,23 @@ static void hpsa_scan_start(struct Scsi_
if (unlikely(lockup_detected(h)))
return hpsa_scan_complete(h);
+ /*
+ * If a scan is already waiting to run, no need to add another
+ */
+ spin_lock_irqsave(&h->scan_lock, flags);
+ if (h->scan_waiting) {
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+ return;
+ }
+
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+
/* wait until any scan already in progress is finished. */
while (1) {
spin_lock_irqsave(&h->scan_lock, flags);
if (h->scan_finished)
break;
+ h->scan_waiting = 1;
spin_unlock_irqrestore(&h->scan_lock, flags);
wait_event(h->scan_wait_queue, h->scan_finished);
/* Note: We don't need to worry about a race between this
@@ -5561,6 +5573,7 @@ static void hpsa_scan_start(struct Scsi_
*/
}
h->scan_finished = 0; /* mark scan as in progress */
+ h->scan_waiting = 0;
spin_unlock_irqrestore(&h->scan_lock, flags);
if (unlikely(lockup_detected(h)))
@@ -8799,6 +8812,7 @@ reinit_after_soft_reset:
init_waitqueue_head(&h->event_sync_wait_queue);
mutex_init(&h->reset_mutex);
h->scan_finished = 1; /* no scan currently in progress */
+ h->scan_waiting = 0;
pci_set_drvdata(pdev, h);
h->ndevices = 0;
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -203,6 +203,7 @@ struct ctlr_info {
dma_addr_t errinfo_pool_dhandle;
unsigned long *cmd_pool_bits;
int scan_finished;
+ u8 scan_waiting : 1;
spinlock_t scan_lock;
wait_queue_head_t scan_wait_queue;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ram Amrani <[email protected]>
[ Upstream commit 1df2adedcce17ad4a39fba74f0e2b611f797fe10 ]
Before iterating over the the LL2 Rx ring, the ring's
spinlock is taken via spin_lock_irqsave().
The actual processing of the packet [including handling
by the protocol driver] is done without said lock,
so qed releases the spinlock and re-claims it afterwards.
Problem is that the final spin_lock_irqrestore() at the end
of the iteration uses the original flags saved from the
initial irqsave() instead of the flags from the most recent
irqsave(). So it's possible that the interrupt status would
be incorrect at the end of the processing.
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support");
CC: Ram Amrani <[email protected]>
Signed-off-by: Yuval Mintz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -443,7 +443,7 @@ qed_ll2_rxq_completion_gsi(struct qed_hw
static int qed_ll2_rxq_completion_reg(struct qed_hwfn *p_hwfn,
struct qed_ll2_info *p_ll2_conn,
union core_rx_cqe_union *p_cqe,
- unsigned long lock_flags,
+ unsigned long *p_lock_flags,
bool b_last_cqe)
{
struct qed_ll2_rx_queue *p_rx = &p_ll2_conn->rx_queue;
@@ -464,10 +464,10 @@ static int qed_ll2_rxq_completion_reg(st
"Mismatch between active_descq and the LL2 Rx chain\n");
list_add_tail(&p_pkt->list_entry, &p_rx->free_descq);
- spin_unlock_irqrestore(&p_rx->lock, lock_flags);
+ spin_unlock_irqrestore(&p_rx->lock, *p_lock_flags);
qed_ll2b_complete_rx_packet(p_hwfn, p_ll2_conn->my_id,
p_pkt, &p_cqe->rx_cqe_fp, b_last_cqe);
- spin_lock_irqsave(&p_rx->lock, lock_flags);
+ spin_lock_irqsave(&p_rx->lock, *p_lock_flags);
return 0;
}
@@ -507,7 +507,8 @@ static int qed_ll2_rxq_completion(struct
break;
case CORE_RX_CQE_TYPE_REGULAR:
rc = qed_ll2_rxq_completion_reg(p_hwfn, p_ll2_conn,
- cqe, flags, b_last_cqe);
+ cqe, &flags,
+ b_last_cqe);
break;
default:
rc = -EIO;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Don Brace <[email protected]>
[ Upstream commit 85b29008d8af6d94a0723aaa8d93cfb6e041158b ]
- Add in a new case for volume offline. Resolves internal testing bug
for multilun array management.
- Return correct status for failed TURs.
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hpsa.c | 35 ++++++++++++++++-------------------
drivers/scsi/hpsa_cmd.h | 2 ++
2 files changed, 18 insertions(+), 19 deletions(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3686,7 +3686,7 @@ exit_failed:
* # (integer code indicating one of several NOT READY states
* describing why a volume is to be kept offline)
*/
-static int hpsa_volume_offline(struct ctlr_info *h,
+static unsigned char hpsa_volume_offline(struct ctlr_info *h,
unsigned char scsi3addr[])
{
struct CommandList *c;
@@ -3707,7 +3707,7 @@ static int hpsa_volume_offline(struct ct
DEFAULT_TIMEOUT);
if (rc) {
cmd_free(h, c);
- return 0;
+ return HPSA_VPD_LV_STATUS_UNSUPPORTED;
}
sense = c->err_info->SenseInfo;
if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
@@ -3718,19 +3718,13 @@ static int hpsa_volume_offline(struct ct
cmd_status = c->err_info->CommandStatus;
scsi_status = c->err_info->ScsiStatus;
cmd_free(h, c);
- /* Is the volume 'not ready'? */
- if (cmd_status != CMD_TARGET_STATUS ||
- scsi_status != SAM_STAT_CHECK_CONDITION ||
- sense_key != NOT_READY ||
- asc != ASC_LUN_NOT_READY) {
- return 0;
- }
/* Determine the reason for not ready state */
ldstat = hpsa_get_volume_status(h, scsi3addr);
/* Keep volume offline in certain cases: */
switch (ldstat) {
+ case HPSA_LV_FAILED:
case HPSA_LV_UNDERGOING_ERASE:
case HPSA_LV_NOT_AVAILABLE:
case HPSA_LV_UNDERGOING_RPI:
@@ -3752,7 +3746,7 @@ static int hpsa_volume_offline(struct ct
default:
break;
}
- return 0;
+ return HPSA_LV_OK;
}
/*
@@ -3825,10 +3819,10 @@ static int hpsa_update_device_info(struc
/* Do an inquiry to the device to see what it is. */
if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
(unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
- /* Inquiry failed (msg printed already) */
dev_err(&h->pdev->dev,
- "hpsa_update_device_info: inquiry failed\n");
- rc = -EIO;
+ "%s: inquiry failed, device will be skipped.\n",
+ __func__);
+ rc = HPSA_INQUIRY_FAILED;
goto bail_out;
}
@@ -3857,15 +3851,19 @@ static int hpsa_update_device_info(struc
if ((this_device->devtype == TYPE_DISK ||
this_device->devtype == TYPE_ZBC) &&
is_logical_dev_addr_mode(scsi3addr)) {
- int volume_offline;
+ unsigned char volume_offline;
hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
hpsa_get_ioaccel_status(h, scsi3addr, this_device);
volume_offline = hpsa_volume_offline(h, scsi3addr);
- if (volume_offline < 0 || volume_offline > 0xff)
- volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED;
- this_device->volume_offline = volume_offline & 0xff;
+ if (volume_offline == HPSA_LV_FAILED) {
+ rc = HPSA_LV_FAILED;
+ dev_err(&h->pdev->dev,
+ "%s: LV failed, device will be skipped.\n",
+ __func__);
+ goto bail_out;
+ }
} else {
this_device->raid_level = RAID_UNKNOWN;
this_device->offload_config = 0;
@@ -4353,8 +4351,7 @@ static void hpsa_update_scsi_devices(str
goto out;
}
if (rc) {
- dev_warn(&h->pdev->dev,
- "Inquiry failed, skipping device.\n");
+ h->drv_req_rescan = 1;
continue;
}
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -156,6 +156,7 @@
#define CFGTBL_BusType_Fibre2G 0x00000200l
/* VPD Inquiry types */
+#define HPSA_INQUIRY_FAILED 0x02
#define HPSA_VPD_SUPPORTED_PAGES 0x00
#define HPSA_VPD_LV_DEVICE_ID 0x83
#define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1
@@ -166,6 +167,7 @@
/* Logical volume states */
#define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff
#define HPSA_LV_OK 0x0
+#define HPSA_LV_FAILED 0x01
#define HPSA_LV_NOT_AVAILABLE 0x0b
#define HPSA_LV_UNDERGOING_ERASE 0x0F
#define HPSA_LV_UNDERGOING_RPI 0x12
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit 655d9ca9ac075da1ef2a45012ba48a39f6eb1f58 ]
The AMD ACP driver adds "-I../acp -I../acp/include" to the gcc command
line, which makes no sense, since these are evaluated relative to the
build directory. When we build with "make W=1", they instead cause
a warning:
cc1: error: ../acp/: No such file or directory [-Werror=missing-include-dirs]
cc1: error: ../acp/include: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_device.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_kms.o' failed
This removes the subdir-ccflags variable that evidently did not
serve any purpose here.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/acp/Makefile | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/gpu/drm/amd/acp/Makefile
+++ b/drivers/gpu/drm/amd/acp/Makefile
@@ -3,6 +3,4 @@
# of AMDSOC/AMDGPU drm driver.
# It provides the HW control for ACP related functionalities.
-subdir-ccflags-y += -I$(AMDACPPATH)/ -I$(AMDACPPATH)/include
-
AMD_ACP_FILES := $(AMDACPPATH)/acp_hw.o
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
[ Upstream commit 340837f985c2cb87ca0868d4aa9ce42b0fab3a21 ]
This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC.
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/pci.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -95,6 +95,11 @@ static const struct pci_device_id intel_
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9da6),
.driver_data = (kernel_ulong_t)0,
},
+ {
+ /* Gemini Lake */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x318e),
+ .driver_data = (kernel_ulong_t)0,
+ },
{ 0 },
};
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Mintz, Yuval" <[email protected]>
[ Upstream commit 752ecb2da11124a948567076b60767dc8034cfa5 ]
When receiving an Rx LL2 packet, qed fails to unmap the previous buffer.
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support");
Signed-off-by: Yuval Mintz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -187,6 +187,8 @@ static void qed_ll2b_complete_rx_packet(
/* If need to reuse or there's no replacement buffer, repost this */
if (rc)
goto out_post;
+ dma_unmap_single(&cdev->pdev->dev, buffer->phys_addr,
+ cdev->ll2->rx_size, DMA_FROM_DEVICE);
skb = build_skb(buffer->data, 0);
if (!skb) {
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit 6be371b053dc86f11465cc1abce2e99bda0a0574 ]
When using the internal PHY it must be powered up when the MII is probed
or the PHY will not be detected. Since the PHY is powered up at reset
this has not been a problem. However, when the kernel is restarted with
kexec the PHY will likely be powered down when the kernel starts so it
will not be detected and the Ethernet link will not be established.
This commit explicitly powers up the internal PHY when the GENET driver
is probed to correct this behavior.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3296,6 +3296,7 @@ static int bcmgenet_probe(struct platfor
const void *macaddr;
struct resource *r;
int err = -EIO;
+ const char *phy_mode_str;
/* Up to GENET_MAX_MQ_CNT + 1 TX queues and RX queues */
dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1,
@@ -3403,6 +3404,13 @@ static int bcmgenet_probe(struct platfor
priv->clk_eee = NULL;
}
+ /* If this is an internal GPHY, power it on now, before UniMAC is
+ * brought out of reset as absolutely no UniMAC activity is allowed
+ */
+ if (dn && !of_property_read_string(dn, "phy-mode", &phy_mode_str) &&
+ !strcasecmp(phy_mode_str, "internal"))
+ bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
+
err = reset_umac(priv);
if (err)
goto err_clk_disable;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Pirko <[email protected]>
[ Upstream commit e9093b1183bbac462d2caef3eac165778c0b1bf1 ]
The num_rec field is 8 bit, so the maximal count number is 255.
This fixes vlans learning not being enabled for wider ranges than 255.
Fixes: a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1757,7 +1757,7 @@ static inline void mlxsw_reg_sfmr_pack(c
#define MLXSW_REG_SPVMLR_ID 0x2020
#define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */
#define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */
-#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 256
+#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 255
#define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \
MLXSW_REG_SPVMLR_REC_LEN * \
MLXSW_REG_SPVMLR_REC_MAX_COUNT)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit fa23b9d1b89fdc34f296f02e496a20aeff5736be ]
This driver uses the MSI domain but has no strict dependency on PCI_MSI, so we
may run into a build failure when CONFIG_GENERIC_MSI_IRQ_DOMAIN is disabled:
drivers/irqchip/irq-mvebu-odmi.c:152:15: error: variable 'odmi_msi_ops' has initializer but incomplete type
static struct msi_domain_ops odmi_msi_ops = {
^~~~~~~~~~~~~~
drivers/irqchip/irq-mvebu-odmi.c:155:15: error: variable 'odmi_msi_domain_info' has initializer but incomplete type
static struct msi_domain_info odmi_msi_domain_info = {
^~~~~~~~~~~~~~~
drivers/irqchip/irq-mvebu-odmi.c:156:3: error: 'struct msi_domain_info' has no member named 'flags'
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
^~~~~
drivers/irqchip/irq-mvebu-odmi.c:156:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function)
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/irqchip/irq-mvebu-odmi.c:156:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function); did you mean 'MSI_FLAG_USE_DEF_DOM_OPS'?
Selecting the option from this driver seems to solve this nicely, though I could
not find any other instance of this in irqchip drivers.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/irqchip/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -258,6 +258,7 @@ config IRQ_MXS
config MVEBU_ODMI
bool
+ select GENERIC_MSI_IRQ_DOMAIN
config MVEBU_PIC
bool
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
[ Upstream commit 6e526fdff7be4f13b24f929a04c0e9ae6761291e ]
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
The endpoints are specifically dereferenced in the i2400m_bootrom_init
path during probe (e.g. in i2400mu_tx_bulk_out).
Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown
and reset backends")
Cc: Inaky Perez-Gonzalez <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wimax/i2400m/usb.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -467,6 +467,9 @@ int i2400mu_probe(struct usb_interface *
struct i2400mu *i2400mu;
struct usb_device *usb_dev = interface_to_usbdev(iface);
+ if (iface->cur_altsetting->desc.bNumEndpoints < 4)
+ return -ENODEV;
+
if (usb_dev->speed != USB_SPEED_HIGH)
dev_err(dev, "device not connected as high speed\n");
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tahsin Erdogan <[email protected]>
[ Upstream commit 4a3a485b1ed0e109718cc8c9d094fa0f552de9b2 ]
When WB_registered flag is not set, wb_queue_work() skips queuing the
work, but does not perform the necessary clean up. In particular, if
work->auto_free is true, it should free the memory.
The leak condition can be reprouced by following these steps:
mount /dev/sdb /mnt/sdb
/* In qemu console: device_del sdb */
umount /dev/sdb
Above will result in a wb_queue_work() call on an unregistered wb and
thus leak memory.
Reported-by: John Sperbeck <[email protected]>
Signed-off-by: Tahsin Erdogan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fs-writeback.c | 35 +++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -173,19 +173,33 @@ static void wb_wakeup(struct bdi_writeba
spin_unlock_bh(&wb->work_lock);
}
+static void finish_writeback_work(struct bdi_writeback *wb,
+ struct wb_writeback_work *work)
+{
+ struct wb_completion *done = work->done;
+
+ if (work->auto_free)
+ kfree(work);
+ if (done && atomic_dec_and_test(&done->cnt))
+ wake_up_all(&wb->bdi->wb_waitq);
+}
+
static void wb_queue_work(struct bdi_writeback *wb,
struct wb_writeback_work *work)
{
trace_writeback_queue(wb, work);
- spin_lock_bh(&wb->work_lock);
- if (!test_bit(WB_registered, &wb->state))
- goto out_unlock;
if (work->done)
atomic_inc(&work->done->cnt);
- list_add_tail(&work->list, &wb->work_list);
- mod_delayed_work(bdi_wq, &wb->dwork, 0);
-out_unlock:
+
+ spin_lock_bh(&wb->work_lock);
+
+ if (test_bit(WB_registered, &wb->state)) {
+ list_add_tail(&work->list, &wb->work_list);
+ mod_delayed_work(bdi_wq, &wb->dwork, 0);
+ } else
+ finish_writeback_work(wb, work);
+
spin_unlock_bh(&wb->work_lock);
}
@@ -1875,16 +1889,9 @@ static long wb_do_writeback(struct bdi_w
set_bit(WB_writeback_running, &wb->state);
while ((work = get_next_work_item(wb)) != NULL) {
- struct wb_completion *done = work->done;
-
trace_writeback_exec(wb, work);
-
wrote += wb_writeback(wb, work);
-
- if (work->auto_free)
- kfree(work);
- if (done && atomic_dec_and_test(&done->cnt))
- wake_up_all(&wb->bdi->wb_waitq);
+ finish_writeback_work(wb, work);
}
/*
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit 07c52d6a0b955a8a28834f9354793cfc4b81d0e9 ]
Add a spinlock to ensure that irq0_stat is not unintentionally altered
as the result of preemption. Also removed unserviced irq0 interrupts
and removed irq1_stat since there is no bottom half service for those
interrupts.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 73 +++++++++++++------------
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 6 +-
2 files changed, 44 insertions(+), 35 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2513,24 +2513,28 @@ static int bcmgenet_init_dma(struct bcmg
/* Interrupt bottom half */
static void bcmgenet_irq_task(struct work_struct *work)
{
+ unsigned long flags;
+ unsigned int status;
struct bcmgenet_priv *priv = container_of(
work, struct bcmgenet_priv, bcmgenet_irq_work);
netif_dbg(priv, intr, priv->dev, "%s\n", __func__);
- if (priv->irq0_stat & UMAC_IRQ_MPD_R) {
- priv->irq0_stat &= ~UMAC_IRQ_MPD_R;
+ spin_lock_irqsave(&priv->lock, flags);
+ status = priv->irq0_stat;
+ priv->irq0_stat = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (status & UMAC_IRQ_MPD_R) {
netif_dbg(priv, wol, priv->dev,
"magic packet detected, waking up\n");
bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
}
/* Link UP/DOWN event */
- if (priv->irq0_stat & UMAC_IRQ_LINK_EVENT) {
+ if (status & UMAC_IRQ_LINK_EVENT)
phy_mac_interrupt(priv->phydev,
- !!(priv->irq0_stat & UMAC_IRQ_LINK_UP));
- priv->irq0_stat &= ~UMAC_IRQ_LINK_EVENT;
- }
+ !!(status & UMAC_IRQ_LINK_UP));
}
/* bcmgenet_isr1: handle Rx and Tx priority queues */
@@ -2539,22 +2543,21 @@ static irqreturn_t bcmgenet_isr1(int irq
struct bcmgenet_priv *priv = dev_id;
struct bcmgenet_rx_ring *rx_ring;
struct bcmgenet_tx_ring *tx_ring;
- unsigned int index;
+ unsigned int index, status;
- /* Save irq status for bottom-half processing. */
- priv->irq1_stat =
- bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_STAT) &
+ /* Read irq status */
+ status = bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_STAT) &
~bcmgenet_intrl2_1_readl(priv, INTRL2_CPU_MASK_STATUS);
/* clear interrupts */
- bcmgenet_intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);
+ bcmgenet_intrl2_1_writel(priv, status, INTRL2_CPU_CLEAR);
netif_dbg(priv, intr, priv->dev,
- "%s: IRQ=0x%x\n", __func__, priv->irq1_stat);
+ "%s: IRQ=0x%x\n", __func__, status);
/* Check Rx priority queue interrupts */
for (index = 0; index < priv->hw_params->rx_queues; index++) {
- if (!(priv->irq1_stat & BIT(UMAC_IRQ1_RX_INTR_SHIFT + index)))
+ if (!(status & BIT(UMAC_IRQ1_RX_INTR_SHIFT + index)))
continue;
rx_ring = &priv->rx_rings[index];
@@ -2567,7 +2570,7 @@ static irqreturn_t bcmgenet_isr1(int irq
/* Check Tx priority queue interrupts */
for (index = 0; index < priv->hw_params->tx_queues; index++) {
- if (!(priv->irq1_stat & BIT(index)))
+ if (!(status & BIT(index)))
continue;
tx_ring = &priv->tx_rings[index];
@@ -2587,19 +2590,20 @@ static irqreturn_t bcmgenet_isr0(int irq
struct bcmgenet_priv *priv = dev_id;
struct bcmgenet_rx_ring *rx_ring;
struct bcmgenet_tx_ring *tx_ring;
+ unsigned int status;
+ unsigned long flags;
- /* Save irq status for bottom-half processing. */
- priv->irq0_stat =
- bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_STAT) &
+ /* Read irq status */
+ status = bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_STAT) &
~bcmgenet_intrl2_0_readl(priv, INTRL2_CPU_MASK_STATUS);
/* clear interrupts */
- bcmgenet_intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR);
+ bcmgenet_intrl2_0_writel(priv, status, INTRL2_CPU_CLEAR);
netif_dbg(priv, intr, priv->dev,
- "IRQ=0x%x\n", priv->irq0_stat);
+ "IRQ=0x%x\n", status);
- if (priv->irq0_stat & UMAC_IRQ_RXDMA_DONE) {
+ if (status & UMAC_IRQ_RXDMA_DONE) {
rx_ring = &priv->rx_rings[DESC_INDEX];
if (likely(napi_schedule_prep(&rx_ring->napi))) {
@@ -2608,7 +2612,7 @@ static irqreturn_t bcmgenet_isr0(int irq
}
}
- if (priv->irq0_stat & UMAC_IRQ_TXDMA_DONE) {
+ if (status & UMAC_IRQ_TXDMA_DONE) {
tx_ring = &priv->tx_rings[DESC_INDEX];
if (likely(napi_schedule_prep(&tx_ring->napi))) {
@@ -2617,22 +2621,23 @@ static irqreturn_t bcmgenet_isr0(int irq
}
}
- if (priv->irq0_stat & (UMAC_IRQ_PHY_DET_R |
- UMAC_IRQ_PHY_DET_F |
- UMAC_IRQ_LINK_EVENT |
- UMAC_IRQ_HFB_SM |
- UMAC_IRQ_HFB_MM |
- UMAC_IRQ_MPD_R)) {
- /* all other interested interrupts handled in bottom half */
- schedule_work(&priv->bcmgenet_irq_work);
- }
-
if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
- priv->irq0_stat & (UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR)) {
- priv->irq0_stat &= ~(UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR);
+ status & (UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR)) {
wake_up(&priv->wq);
}
+ /* all other interested interrupts handled in bottom half */
+ status &= (UMAC_IRQ_LINK_EVENT |
+ UMAC_IRQ_MPD_R);
+ if (status) {
+ /* Save irq status for bottom-half processing. */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->irq0_stat |= status;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ schedule_work(&priv->bcmgenet_irq_work);
+ }
+
return IRQ_HANDLED;
}
@@ -3334,6 +3339,8 @@ static int bcmgenet_probe(struct platfor
goto err;
}
+ spin_lock_init(&priv->lock);
+
SET_NETDEV_DEV(dev, &pdev->dev);
dev_set_drvdata(&pdev->dev, dev);
ether_addr_copy(dev->dev_addr, macaddr);
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -623,11 +623,13 @@ struct bcmgenet_priv {
struct work_struct bcmgenet_irq_work;
int irq0;
int irq1;
- unsigned int irq0_stat;
- unsigned int irq1_stat;
int wol_irq;
bool wol_irq_disabled;
+ /* shared status */
+ spinlock_t lock;
+ unsigned int irq0_stat;
+
/* HW descriptors/checksum variables */
bool desc_64b_en;
bool desc_rxchk_en;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Torokhov <[email protected]>
[ Upstream commit a4c2a13129f7c5bcf81704c06851601593303fd5 ]
TUXEDO BU1406 does not implement active multiplexing mode properly,
and takes around 550 ms in i8042_set_mux_mode(). Given that the
device does not have external AUX port, there is no downside in
disabling the MUX mode.
Reported-by: Paul Menzel <[email protected]>
Suggested-by: Vojtech Pavlik <[email protected]>
Reviewed-by: Marcos Paulo de Souza <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -520,6 +520,13 @@ static const struct dmi_system_id __init
DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
},
},
+ {
+ /* TUXEDO BU1406 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"),
+ },
+ },
{ }
};
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hiroyuki Yokoyama <[email protected]>
[ Upstream commit a1c2ff53726907aff5feb37e4cfd45c1ff626431 ]
This patch fixes the problem that the missing value of the route path
setting table and incorrect values are set in the CMD_ROUTE_SELECT
register.
Signed-off-by: Hiroyuki Yokoyama <[email protected]>
[Kuninori: shared data on MIX and non-MIX case]
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/cmd.c | 36 ++++++++++++++++++++----------------
1 file changed, 20 insertions(+), 16 deletions(-)
--- a/sound/soc/sh/rcar/cmd.c
+++ b/sound/soc/sh/rcar/cmd.c
@@ -31,23 +31,24 @@ static int rsnd_cmd_init(struct rsnd_mod
struct rsnd_mod *mix = rsnd_io_to_mod_mix(io);
struct device *dev = rsnd_priv_to_dev(priv);
u32 data;
+ u32 path[] = {
+ [1] = 1 << 0,
+ [5] = 1 << 8,
+ [6] = 1 << 12,
+ [9] = 1 << 15,
+ };
if (!mix && !dvc)
return 0;
+ if (ARRAY_SIZE(path) < rsnd_mod_id(mod) + 1)
+ return -ENXIO;
+
if (mix) {
struct rsnd_dai *rdai;
struct rsnd_mod *src;
struct rsnd_dai_stream *tio;
int i;
- u32 path[] = {
- [0] = 0,
- [1] = 1 << 0,
- [2] = 0,
- [3] = 0,
- [4] = 0,
- [5] = 1 << 8
- };
/*
* it is assuming that integrater is well understanding about
@@ -70,16 +71,19 @@ static int rsnd_cmd_init(struct rsnd_mod
} else {
struct rsnd_mod *src = rsnd_io_to_mod_src(io);
- u32 path[] = {
- [0] = 0x30000,
- [1] = 0x30001,
- [2] = 0x40000,
- [3] = 0x10000,
- [4] = 0x20000,
- [5] = 0x40100
+ u8 cmd_case[] = {
+ [0] = 0x3,
+ [1] = 0x3,
+ [2] = 0x4,
+ [3] = 0x1,
+ [4] = 0x2,
+ [5] = 0x4,
+ [6] = 0x1,
+ [9] = 0x2,
};
- data = path[rsnd_mod_id(src)];
+ data = path[rsnd_mod_id(src)] |
+ cmd_case[rsnd_mod_id(src)] << 16;
}
dev_dbg(dev, "ctu/mix path = 0x%08x", data);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
[ Upstream commit 4ca60d08cbe65f501baad64af50fceba79c19fbb ]
consider a bridge with mtu 9000, but end host sending smaller
packets to another host with mtu < 9000.
In this case, after reassembly, bridge+defrag would refragment,
and then attempt to send the reassembled packet as long as it
was below 9k.
Instead we have to cap by the largest fragment size seen.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_netfilter_hooks.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -706,18 +706,20 @@ static unsigned int nf_bridge_mtu_reduct
static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
{
- struct nf_bridge_info *nf_bridge;
- unsigned int mtu_reserved;
+ struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb);
+ unsigned int mtu, mtu_reserved;
mtu_reserved = nf_bridge_mtu_reduction(skb);
+ mtu = skb->dev->mtu;
- if (skb_is_gso(skb) || skb->len + mtu_reserved <= skb->dev->mtu) {
+ if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu)
+ mtu = nf_bridge->frag_max_size;
+
+ if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) {
nf_bridge_info_free(skb);
return br_dev_queue_push_xmit(net, sk, skb);
}
- nf_bridge = nf_bridge_info_get(skb);
-
/* This is wrong! We should preserve the original fragment
* boundaries by preserving frag_list rather than refragmenting.
*/
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 upstream.
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/hmac.c | 6 +++++-
crypto/shash.c | 5 +++--
include/crypto/internal/hash.h | 8 ++++++++
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -194,11 +194,15 @@ static int hmac_create(struct crypto_tem
salg = shash_attr_alg(tb[1], 0, 0);
if (IS_ERR(salg))
return PTR_ERR(salg);
+ alg = &salg->base;
+ /* The underlying hash algorithm must be unkeyed */
err = -EINVAL;
+ if (crypto_shash_alg_has_setkey(salg))
+ goto out_put_alg;
+
ds = salg->digestsize;
ss = salg->statesize;
- alg = &salg->base;
if (ds > alg->cra_blocksize ||
ss < alg->cra_blocksize)
goto out_put_alg;
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -24,11 +24,12 @@
static const struct crypto_type crypto_shash_type;
-static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
- unsigned int keylen)
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen)
{
return -ENOSYS;
}
+EXPORT_SYMBOL_GPL(shash_no_setkey);
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -80,6 +80,14 @@ int ahash_register_instance(struct crypt
struct ahash_instance *inst);
void ahash_free_instance(struct crypto_instance *inst);
+int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen);
+
+static inline bool crypto_shash_alg_has_setkey(struct shash_alg *alg)
+{
+ return alg->setkey != shash_no_setkey;
+}
+
int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
struct hash_alg_common *alg,
struct crypto_instance *inst);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Changbin Du <[email protected]>
commit 90e406f96f630c07d631a021fd4af10aac913e77 upstream.
The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.
Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.
With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 36dfe9252bd4c ("ftrace: make use of tracing_cpumask")
Signed-off-by: Changbin Du <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3727,37 +3727,30 @@ static const struct file_operations show
.llseek = seq_lseek,
};
-/*
- * The tracer itself will not take this lock, but still we want
- * to provide a consistent cpumask to user-space:
- */
-static DEFINE_MUTEX(tracing_cpumask_update_lock);
-
-/*
- * Temporary storage for the character representation of the
- * CPU bitmask (and one more byte for the newline):
- */
-static char mask_str[NR_CPUS + 1];
-
static ssize_t
tracing_cpumask_read(struct file *filp, char __user *ubuf,
size_t count, loff_t *ppos)
{
struct trace_array *tr = file_inode(filp)->i_private;
+ char *mask_str;
int len;
- mutex_lock(&tracing_cpumask_update_lock);
+ len = snprintf(NULL, 0, "%*pb\n",
+ cpumask_pr_args(tr->tracing_cpumask)) + 1;
+ mask_str = kmalloc(len, GFP_KERNEL);
+ if (!mask_str)
+ return -ENOMEM;
- len = snprintf(mask_str, count, "%*pb\n",
+ len = snprintf(mask_str, len, "%*pb\n",
cpumask_pr_args(tr->tracing_cpumask));
if (len >= count) {
count = -EINVAL;
goto out_err;
}
- count = simple_read_from_buffer(ubuf, count, ppos, mask_str, NR_CPUS+1);
+ count = simple_read_from_buffer(ubuf, count, ppos, mask_str, len);
out_err:
- mutex_unlock(&tracing_cpumask_update_lock);
+ kfree(mask_str);
return count;
}
@@ -3777,8 +3770,6 @@ tracing_cpumask_write(struct file *filp,
if (err)
goto err_unlock;
- mutex_lock(&tracing_cpumask_update_lock);
-
local_irq_disable();
arch_spin_lock(&tr->max_lock);
for_each_tracing_cpu(cpu) {
@@ -3801,8 +3792,6 @@ tracing_cpumask_write(struct file *filp,
local_irq_enable();
cpumask_copy(tr->tracing_cpumask, tracing_cpumask_new);
-
- mutex_unlock(&tracing_cpumask_update_lock);
free_cpumask_var(tracing_cpumask_new);
return count;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 upstream.
A malicious USB device with crafted descriptors can cause the kernel
to access unallocated memory by setting the bNumInterfaces value too
high in a configuration descriptor. Although the value is adjusted
during parsing, this adjustment is skipped in one of the error return
paths.
This patch prevents the problem by setting bNumInterfaces to 0
initially. The existing code already sets it to the proper value
after parsing is complete.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/config.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -550,6 +550,9 @@ static int usb_parse_configuration(struc
unsigned iad_num = 0;
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
+ nintf = nintf_orig = config->desc.bNumInterfaces;
+ config->desc.bNumInterfaces = 0; // Adjusted later
+
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
config->desc.bLength < USB_DT_CONFIG_SIZE ||
config->desc.bLength > size) {
@@ -563,7 +566,6 @@ static int usb_parse_configuration(struc
buffer += config->desc.bLength;
size -= config->desc.bLength;
- nintf = nintf_orig = config->desc.bNumInterfaces;
if (nintf > USB_MAXINTERFACES) {
dev_warn(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit eca4bad73409aedc6ff22f823c18b67a4f08c851 ]
The reserved gphy_rev value of 0x01ff must be tested before the old
or new scheme for GPHY major versioning are tested, otherwise it will
be treated as 0xff00 according to the old scheme.
Fixes: b04a2f5b9ff5 ("net: bcmgenet: add support for new GENET PHY revision scheme")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3233,6 +3233,12 @@ static void bcmgenet_set_hw_params(struc
*/
gphy_rev = reg & 0xffff;
+ /* This is reserved so should require special treatment */
+ if (gphy_rev == 0 || gphy_rev == 0x01ff) {
+ pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev);
+ return;
+ }
+
/* This is the good old scheme, just GPHY major, no minor nor patch */
if ((gphy_rev & 0xf0) != 0)
priv->gphy_rev = gphy_rev << 8;
@@ -3241,12 +3247,6 @@ static void bcmgenet_set_hw_params(struc
else if ((gphy_rev & 0xff00) != 0)
priv->gphy_rev = gphy_rev;
- /* This is reserved so should require special treatment */
- else if (gphy_rev == 0 || gphy_rev == 0x01ff) {
- pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev);
- return;
- }
-
#ifdef CONFIG_PHYS_ADDR_T_64BIT
if (!(params->flags & GENET_HAS_40BITS))
pr_warn("GENET does not support 40-bits PA\n");
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <[email protected]>
[ Upstream commit ffff71328a3c321f7c14cc1edd33577717037744 ]
The location of the RBUF overflow and error counters has moved between
different version of the GENET MAC. This commit corrects the driver to
read from the correct locations depending on the version of the GENET
MAC.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 60 ++++++++++++++++++++++---
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 10 ++--
2 files changed, 60 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1,7 +1,7 @@
/*
* Broadcom GENET (Gigabit Ethernet) controller driver
*
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -778,8 +778,9 @@ static const struct bcmgenet_stats bcmge
STAT_GENET_RUNT("rx_runt_bytes", mib.rx_runt_bytes),
/* Misc UniMAC counters */
STAT_GENET_MISC("rbuf_ovflow_cnt", mib.rbuf_ovflow_cnt,
- UMAC_RBUF_OVFL_CNT),
- STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt, UMAC_RBUF_ERR_CNT),
+ UMAC_RBUF_OVFL_CNT_V1),
+ STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt,
+ UMAC_RBUF_ERR_CNT_V1),
STAT_GENET_MISC("mdf_err_cnt", mib.mdf_err_cnt, UMAC_MDF_ERR_CNT),
STAT_GENET_SOFT_MIB("alloc_rx_buff_failed", mib.alloc_rx_buff_failed),
STAT_GENET_SOFT_MIB("rx_dma_failed", mib.rx_dma_failed),
@@ -821,6 +822,45 @@ static void bcmgenet_get_strings(struct
}
}
+static u32 bcmgenet_update_stat_misc(struct bcmgenet_priv *priv, u16 offset)
+{
+ u16 new_offset;
+ u32 val;
+
+ switch (offset) {
+ case UMAC_RBUF_OVFL_CNT_V1:
+ if (GENET_IS_V2(priv))
+ new_offset = RBUF_OVFL_CNT_V2;
+ else
+ new_offset = RBUF_OVFL_CNT_V3PLUS;
+
+ val = bcmgenet_rbuf_readl(priv, new_offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_rbuf_writel(priv, 0, new_offset);
+ break;
+ case UMAC_RBUF_ERR_CNT_V1:
+ if (GENET_IS_V2(priv))
+ new_offset = RBUF_ERR_CNT_V2;
+ else
+ new_offset = RBUF_ERR_CNT_V3PLUS;
+
+ val = bcmgenet_rbuf_readl(priv, new_offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_rbuf_writel(priv, 0, new_offset);
+ break;
+ default:
+ val = bcmgenet_umac_readl(priv, offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_umac_writel(priv, 0, offset);
+ break;
+ }
+
+ return val;
+}
+
static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv)
{
int i, j = 0;
@@ -845,10 +885,16 @@ static void bcmgenet_update_mib_counters
UMAC_MIB_START + j + offset);
break;
case BCMGENET_STAT_MISC:
- val = bcmgenet_umac_readl(priv, s->reg_offset);
- /* clear if overflowed */
- if (val == ~0)
- bcmgenet_umac_writel(priv, 0, s->reg_offset);
+ if (GENET_IS_V1(priv)) {
+ val = bcmgenet_umac_readl(priv, s->reg_offset);
+ /* clear if overflowed */
+ if (val == ~0)
+ bcmgenet_umac_writel(priv, 0,
+ s->reg_offset);
+ } else {
+ val = bcmgenet_update_stat_misc(priv,
+ s->reg_offset);
+ }
break;
}
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -214,7 +214,9 @@ struct bcmgenet_mib_counters {
#define MDIO_REG_SHIFT 16
#define MDIO_REG_MASK 0x1F
-#define UMAC_RBUF_OVFL_CNT 0x61C
+#define UMAC_RBUF_OVFL_CNT_V1 0x61C
+#define RBUF_OVFL_CNT_V2 0x80
+#define RBUF_OVFL_CNT_V3PLUS 0x94
#define UMAC_MPD_CTRL 0x620
#define MPD_EN (1 << 0)
@@ -224,7 +226,9 @@ struct bcmgenet_mib_counters {
#define UMAC_MPD_PW_MS 0x624
#define UMAC_MPD_PW_LS 0x628
-#define UMAC_RBUF_ERR_CNT 0x634
+#define UMAC_RBUF_ERR_CNT_V1 0x634
+#define RBUF_ERR_CNT_V2 0x84
+#define RBUF_ERR_CNT_V3PLUS 0x98
#define UMAC_MDF_ERR_CNT 0x638
#define UMAC_MDF_CTRL 0x650
#define UMAC_MDF_ADDR 0x654
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Arcangeli <[email protected]>
[ Upstream commit 46aa6a302b53f543f8e8b8e1714dc5e449ad36a6 ]
linux/tools/testing/selftests/vm $ make
gcc -Wall -I ../../../../usr/include compaction_test.c -lrt -o /compaction_test
/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:54: /compaction_test] Error 1
Since commit a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory. It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrea Arcangeli <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: "Dr. David Alan Gilbert" <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Cc: Hillf Danton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/vm/Makefile | 4 ++++
1 file changed, 4 insertions(+)
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -1,5 +1,9 @@
# Makefile for vm selftests
+ifndef OUTPUT
+ OUTPUT := $(shell pwd)
+endif
+
CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
BINARIES = compaction_test
BINARIES += hugepage-mmap
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guoqing Jiang <[email protected]>
[ Upstream commit 9c8043f337f14d1743006dfc59c03e80a42e3884 ]
To avoid memory leak, we need to free the cinfo which
is allocated when node join cluster.
Reviewed-by: NeilBrown <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md-cluster.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/md-cluster.c
+++ b/drivers/md/md-cluster.c
@@ -974,6 +974,7 @@ static int leave(struct mddev *mddev)
lockres_free(cinfo->bitmap_lockres);
unlock_all_bitmaps(mddev);
dlm_release_lockspace(cinfo->lockspace, 2);
+ kfree(cinfo);
return 0;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <[email protected]>
[ Upstream commit 520ad89a54edea84496695d528f73ddcf4a52ea4 ]
In some situations, the firmware will return 0 for autoneg supported
speed. This may happen if the firmware detects no SFP module, for
example. The driver should ignore this so that we don't end up with
an invalid autoneg setting with nothing advertised. When SFP module
is inserted, we'll get the updated settings from firmware at that time.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5132,8 +5132,9 @@ static int bnxt_hwrm_phy_qcaps(struct bn
bp->lpi_tmr_hi = le32_to_cpu(resp->valid_tx_lpi_timer_high) &
PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_HIGH_MASK;
}
- link_info->support_auto_speeds =
- le16_to_cpu(resp->supported_speeds_auto_mode);
+ if (resp->supported_speeds_auto_mode)
+ link_info->support_auto_speeds =
+ le16_to_cpu(resp->supported_speeds_auto_mode);
hwrm_phy_qcaps_exit:
mutex_unlock(&bp->hwrm_cmd_lock);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit ecaaab5649781c5a0effdaf298a925063020500e upstream.
When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.
The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.
The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes. To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int algfd, reqfd;
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "salsa20",
};
char key[16] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
reqfd = accept(algfd, 0, 0);
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
read(reqfd, key, sizeof(key));
}
Reported-by: syzbot <[email protected]>
Fixes: eb6f13eb9f81 ("[CRYPTO] salsa20_generic: Fix multi-page processing")
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/crypto/salsa20_glue.c | 7 -------
crypto/salsa20_generic.c | 7 -------
2 files changed, 14 deletions(-)
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -59,13 +59,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
- walk.dst.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.src.virt.addr,
walk.dst.virt.addr,
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -188,13 +188,6 @@ static int encrypt(struct blkcipher_desc
salsa20_ivsetup(ctx, walk.iv);
- if (likely(walk.nbytes == nbytes))
- {
- salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
- walk.src.virt.addr, nbytes);
- return blkcipher_walk_done(desc, &walk, 0);
- }
-
while (walk.nbytes >= 64) {
salsa20_encrypt_bytes(ctx, walk.dst.virt.addr,
walk.src.virt.addr,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Wallis <[email protected]>
commit 6f6a23a213be51728502b88741ba6a10cda2441d upstream.
Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
introduced a bug (that is in fact documented by the patch commit text)
that leaves behind a dangling pointer. Since the done_wait structure is
allocated on the stack, future invocations to the DMATEST can produce
undesirable results (e.g., corrupted spinlocks).
Commit a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times
out") attempted to WARN the user that the stack was likely corrupted but
did not fix the actual issue.
This patch fixes the issue by pushing the wait queue and callback
structs into the the thread structure. If a failure occurs due to time,
dmaengine_terminate_all will force the callback to safely call
wake_up_all() without possibility of using a freed pointer.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605
Fixes: adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
Reviewed-by: Sinan Kaya <[email protected]>
Suggested-by: Shunyong Yang <[email protected]>
Signed-off-by: Adam Wallis <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/dmatest.c | 55 ++++++++++++++++++++++++++++----------------------
1 file changed, 31 insertions(+), 24 deletions(-)
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -158,6 +158,12 @@ MODULE_PARM_DESC(run, "Run the test (def
#define PATTERN_OVERWRITE 0x20
#define PATTERN_COUNT_MASK 0x1f
+/* poor man's completion - we want to use wait_event_freezable() on it */
+struct dmatest_done {
+ bool done;
+ wait_queue_head_t *wait;
+};
+
struct dmatest_thread {
struct list_head node;
struct dmatest_info *info;
@@ -166,6 +172,8 @@ struct dmatest_thread {
u8 **srcs;
u8 **dsts;
enum dma_transaction_type type;
+ wait_queue_head_t done_wait;
+ struct dmatest_done test_done;
bool done;
};
@@ -326,18 +334,25 @@ static unsigned int dmatest_verify(u8 **
return error_count;
}
-/* poor man's completion - we want to use wait_event_freezable() on it */
-struct dmatest_done {
- bool done;
- wait_queue_head_t *wait;
-};
static void dmatest_callback(void *arg)
{
struct dmatest_done *done = arg;
-
- done->done = true;
- wake_up_all(done->wait);
+ struct dmatest_thread *thread =
+ container_of(arg, struct dmatest_thread, done_wait);
+ if (!thread->done) {
+ done->done = true;
+ wake_up_all(done->wait);
+ } else {
+ /*
+ * If thread->done, it means that this callback occurred
+ * after the parent thread has cleaned up. This can
+ * happen in the case that driver doesn't implement
+ * the terminate_all() functionality and a dma operation
+ * did not occur within the timeout period
+ */
+ WARN(1, "dmatest: Kernel memory may be corrupted!!\n");
+ }
}
static unsigned int min_odd(unsigned int x, unsigned int y)
@@ -408,9 +423,8 @@ static unsigned long long dmatest_KBs(s6
*/
static int dmatest_func(void *data)
{
- DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_wait);
struct dmatest_thread *thread = data;
- struct dmatest_done done = { .wait = &done_wait };
+ struct dmatest_done *done = &thread->test_done;
struct dmatest_info *info;
struct dmatest_params *params;
struct dma_chan *chan;
@@ -637,9 +651,9 @@ static int dmatest_func(void *data)
continue;
}
- done.done = false;
+ done->done = false;
tx->callback = dmatest_callback;
- tx->callback_param = &done;
+ tx->callback_param = done;
cookie = tx->tx_submit(tx);
if (dma_submit_error(cookie)) {
@@ -652,21 +666,12 @@ static int dmatest_func(void *data)
}
dma_async_issue_pending(chan);
- wait_event_freezable_timeout(done_wait, done.done,
+ wait_event_freezable_timeout(thread->done_wait, done->done,
msecs_to_jiffies(params->timeout));
status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
- if (!done.done) {
- /*
- * We're leaving the timed out dma operation with
- * dangling pointer to done_wait. To make this
- * correct, we'll need to allocate wait_done for
- * each test iteration and perform "who's gonna
- * free it this time?" dancing. For now, just
- * leave it dangling.
- */
- WARN(1, "dmatest: Kernel stack may be corrupted!!\n");
+ if (!done->done) {
dmaengine_unmap_put(um);
result("test timed out", total_tests, src_off, dst_off,
len, 0);
@@ -747,7 +752,7 @@ err_thread_type:
dmatest_KBs(runtime, total_len), ret);
/* terminate all transfers on specified channels */
- if (ret)
+ if (ret || failed_tests)
dmaengine_terminate_all(chan);
thread->done = true;
@@ -807,6 +812,8 @@ static int dmatest_add_threads(struct dm
thread->info = info;
thread->chan = dtc->chan;
thread->type = type;
+ thread->test_done.wait = &thread->done_wait;
+ init_waitqueue_head(&thread->done_wait);
smp_wmb();
thread->task = kthread_create(dmatest_func, thread, "%s-%s%u",
dma_chan_name(chan), op, i);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chandan Rajendra <[email protected]>
commit 9d5afec6b8bd46d6ed821aa1579634437f58ef1f upstream.
On a ppc64 machine, when mounting a fuzzed ext2 image (generated by
fsfuzzer) the following call trace is seen,
VFS: brelse: Trying to free free buffer
WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40
.__brelse.part.6+0x20/0x40 (unreliable)
.ext4_find_entry+0x384/0x4f0
.ext4_lookup+0x84/0x250
.lookup_slow+0xdc/0x230
.walk_component+0x268/0x400
.path_lookupat+0xec/0x2d0
.filename_lookup+0x9c/0x1d0
.vfs_statx+0x98/0x140
.SyS_newfstatat+0x48/0x80
system_call+0x58/0x6c
This happens because the directory that ext4_find_entry() looks up has
inode->i_size that is less than the block size of the filesystem. This
causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not
reading any of the directory file's blocks. This renders the entries in
bh_use[] array to continue to have garbage data. buffer_uptodate() on
bh_use[0] can then return a zero value upon which brelse() function is
invoked.
This commit fixes the bug by returning -ENOENT when the directory file
has no associated blocks.
Reported-by: Abdul Haleem <[email protected]>
Signed-off-by: Chandan Rajendra <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1417,6 +1417,10 @@ static struct buffer_head * ext4_find_en
"falling back\n"));
}
nblocks = dir->i_size >> EXT4_BLOCK_SIZE_BITS(sb);
+ if (!nblocks) {
+ ret = NULL;
+ goto cleanup_and_exit;
+ }
start = EXT4_I(dir)->i_dir_start_lookup;
if (start >= nblocks)
start = 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit d2890c3778b164fde587bc16583f3a1c87233ec5 upstream.
In rsa_get_n(), if the buffer contained all 0's and "FIPS mode" is
enabled, we would read one byte past the end of the buffer while
scanning the leading zeroes. Fix it by checking 'n_sz' before '!*ptr'.
This bug was reachable by adding a specially crafted key of type
"asymmetric" (requires CONFIG_RSA and CONFIG_X509_CERTIFICATE_PARSER).
KASAN report:
BUG: KASAN: slab-out-of-bounds in rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
Read of size 1 at addr ffff88003501a708 by task keyctl/196
CPU: 1 PID: 196 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
asn1_ber_decoder+0x82a/0x1fd0 lib/asn1_decoder.c:328
rsa_set_pub_key+0xd3/0x320 crypto/rsa.c:278
crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
pkcs1pad_set_pub_key+0xae/0x200 crypto/rsa-pkcs1pad.c:117
crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
public_key_verify_signature+0x270/0x9d0 crypto/asymmetric_keys/public_key.c:106
x509_check_for_self_signed+0x2ea/0x480 crypto/asymmetric_keys/x509_public_key.c:141
x509_cert_parse+0x46a/0x620 crypto/asymmetric_keys/x509_cert_parser.c:129
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Allocated by task 196:
__do_kmalloc mm/slab.c:3711 [inline]
__kmalloc_track_caller+0x118/0x2e0 mm/slab.c:3726
kmemdup+0x17/0x40 mm/util.c:118
kmemdup ./include/linux/string.h:414 [inline]
x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes: 5a7de97309f5 ("crypto: rsa - return raw integers for the ASN.1 parser")
Cc: Tudor Ambarus <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: James Morris <[email protected]>
Reviewed-by: David Howells <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa_helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/rsa_helper.c
+++ b/crypto/rsa_helper.c
@@ -30,7 +30,7 @@ int rsa_get_n(void *context, size_t hdrl
return -EINVAL;
if (fips_enabled) {
- while (!*ptr && n_sz) {
+ while (n_sz && !*ptr) {
ptr++;
n_sz--;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chunfeng Yun <[email protected]>
commit 72b663a99c074a8d073e7ecdae446cfb024ef551 upstream.
For MTK's xHCI 1.0 or latter, TD size is the number of max
packet sized packets remaining in the TD, not including
this TRB (following spec).
For MTK's xHCI 0.96 and older, TD size is the number of max
packet sized packets remaining in the TD, including this TRB
(not following spec).
Signed-off-by: Chunfeng Yun <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ring.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3132,7 +3132,7 @@ static u32 xhci_td_remainder(struct xhci
{
u32 maxp, total_packet_count;
- /* MTK xHCI is mostly 0.97 but contains some features from 1.0 */
+ /* MTK xHCI 0.96 contains some features from 1.0 */
if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
return ((td_total_len - transferred) >> 10);
@@ -3141,8 +3141,8 @@ static u32 xhci_td_remainder(struct xhci
trb_buff_len == td_total_len)
return 0;
- /* for MTK xHCI, TD size doesn't include this TRB */
- if (xhci->quirks & XHCI_MTK_HOST)
+ /* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */
+ if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100))
trb_buff_len = 0;
maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit 5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream.
Avoid null pointer dereference if some function is walking through the
devs array accessing members of a new virt_dev that is mid allocation.
Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its
members are properly allocated.
issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port
"Quick analysis suggests that xhci_alloc_virt_device() is not mutex
protected. If so, there is a time frame where xhci->devs[slot_id] is set
but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL."
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mem.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1032,10 +1032,9 @@ int xhci_alloc_virt_device(struct xhci_h
return 0;
}
- xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
- if (!xhci->devs[slot_id])
+ dev = kzalloc(sizeof(*dev), flags);
+ if (!dev)
return 0;
- dev = xhci->devs[slot_id];
/* Allocate the (output) device context that will be used in the HC. */
dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
@@ -1083,9 +1082,17 @@ int xhci_alloc_virt_device(struct xhci_h
&xhci->dcbaa->dev_context_ptrs[slot_id],
le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
+ xhci->devs[slot_id] = dev;
+
return 1;
fail:
- xhci_free_virt_device(xhci, slot_id);
+
+ if (dev->in_ctx)
+ xhci_free_container_ctx(xhci, dev->in_ctx);
+ if (dev->out_ctx)
+ xhci_free_container_ctx(xhci, dev->out_ctx);
+ kfree(dev);
+
return 0;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan <[email protected]>
commit be6123df1ea8f01ee2f896a16c2b7be3e4557a5a upstream.
stub_send_ret_submit() handles urb with a potential null transfer_buffer,
when it replays a packet with potential malicious data that could contain
a null buffer. Add a check for the condition when actual_length > 0 and
transfer_buffer is null.
Reported-by: Secunia Research <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub_tx.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -181,6 +181,13 @@ static int stub_send_ret_submit(struct s
memset(&pdu_header, 0, sizeof(pdu_header));
memset(&msg, 0, sizeof(msg));
+ if (urb->actual_length > 0 && !urb->transfer_buffer) {
+ dev_err(&sdev->udev->dev,
+ "urb: actual_length %d transfer_buffer null\n",
+ urb->actual_length);
+ return -1;
+ }
+
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
iovnum = 2 + urb->number_of_packets;
else
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felipe Balbi <[email protected]>
commit 541b6fe63023f3059cf85d47ff2767a3e42a8e44 upstream.
According to USB Specification 2.0 table 9-4,
wMaxPacketSize is a bitfield. Endpoint's maxpacket
is laid out in bits 10:0. For high-speed,
high-bandwidth isochronous endpoints, bits 12:11
contain a multiplier to tell us how many
transactions we want to try per uframe.
This means that if we want an isochronous endpoint
to issue 3 transfers of 1024 bytes per uframe,
wMaxPacketSize should contain the value:
1024 | (2 << 11)
or 5120 (0x1400). In order to make Host and
Peripheral controller drivers' life easier, we're
adding a helper which returns bits 12:11. Note that
no care is made WRT to checking endpoint type and
gadget's speed. That's left for drivers to handle.
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/usb/ch9.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/include/uapi/linux/usb/ch9.h
+++ b/include/uapi/linux/usb/ch9.h
@@ -423,6 +423,11 @@ struct usb_endpoint_descriptor {
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+#define USB_EP_MAXP_MULT_SHIFT 11
+#define USB_EP_MAXP_MULT_MASK (3 << USB_EP_MAXP_MULT_SHIFT)
+#define USB_EP_MAXP_MULT(m) \
+ (((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT)
+
/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
#define USB_ENDPOINT_INTRTYPE 0x30
#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
@@ -630,6 +635,20 @@ static inline int usb_endpoint_maxp(cons
return __le16_to_cpu(epd->wMaxPacketSize);
}
+/**
+ * usb_endpoint_maxp_mult - get endpoint's transactional opportunities
+ * @epd: endpoint to be checked
+ *
+ * Return @epd's wMaxPacketSize[12:11] + 1
+ */
+static inline int
+usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd)
+{
+ int maxp = __le16_to_cpu(epd->wMaxPacketSize);
+
+ return USB_EP_MAXP_MULT(maxp) + 1;
+}
+
static inline int usb_endpoint_interrupt_type(
const struct usb_endpoint_descriptor *epd)
{
On 12/18/2017 08:47 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.71 release.
> There are 177 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Dec 20 15:28:22 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.71-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Mon, Dec 18, 2017 at 09:21:51AM -0800, Joe Perches wrote:
>On Mon, 2017-12-18 at 16:49 +0100, Greg Kroah-Hartman wrote:
>> 4.9-stable review patch. If anyone has any objections, please let me know.
>
>I am _very_ suspicious of any -stable patch by Markus Elfring.
>
>Are you sure this is necessary and useful for -stable?
>Does this actually fix something or does it merely reduce
>object size a few bytes?
Yeah... While the patch on it's own makes some sense, the code around
it is pretty crappy and doesn't benefit from the patch.
I'll drop it, thanks!
--
Thanks,
Sasha
> Does this actually fix something
Yes. - Does the used error code matter for you?
> or does it merely reduce object size a few bytes?
No. - How does this question fit to the commit message?
Regards,
Markus
On 12/18/2017 07:47 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.71 release.
> There are 177 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Dec 20 15:28:22 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 145 pass: 145 fail: 0
Qemu test results:
total: 126 pass: 126 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On 18 December 2017 at 21:17, Greg Kroah-Hartman
<[email protected]> wrote:
> This is the start of the stable review cycle for the 4.9.71 release.
> There are 177 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Dec 20 15:28:22 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.71-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
Summary
------------------------------------------------------------------------
kernel: 4.9.71-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 314007552c0f85c34b8bd800fe2b80a4c55990b8
git describe: v4.9.70-178-g314007552c0f
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.70-178-g314007552c0f
No regressions (compared to build v4.9.70)
Boards, architectures and test suites:
-------------------------------------
hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - pass: 39, skip: 23
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 983, skip: 121
* ltp-timers-tests - pass: 12,
juno-r2 - arm64
* boot - pass: 20,
* kselftest - pass: 40, skip: 23
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 985, skip: 121
* ltp-timers-tests - pass: 12,
x15 - arm
* boot - pass: 20,
* kselftest - pass: 37, skip: 25
* libhugetlbfs - pass: 87, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 20, skip: 2
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 13, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1036, skip: 66
* ltp-timers-tests - pass: 12,
x86_64
* boot - pass: 20,
* kselftest - pass: 53, skip: 24
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 1,
* ltp-containers-tests - pass: 63,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 1
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 2,
* ltp-ipc-tests - pass: 8,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 3,
* ltp-sched-tests - pass: 9,
* ltp-securebits-tests - pass: 3,
* ltp-syscalls-tests - pass: 957, skip: 163
* ltp-timers-tests - pass: 12,
Documentation - https://collaborate.linaro.org/display/LKFT/Email+Reports
Tested-by: Naresh Kamboju <[email protected]>