This is the start of the stable review cycle for the 4.15.17 release.
There are 168 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Apr 12 21:27:22 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.17-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.15.17-rc1
Moshe Shemesh <[email protected]>
net/mlx4_core: Fix memory leak while delete slave's resources
Jason Wang <[email protected]>
vhost_net: add missing lock nesting notation
Xin Long <[email protected]>
team: move dev_mc_sync after master_upper_dev_link in team_port_add
Xin Long <[email protected]>
route: check sysctl_fib_multipath_use_neigh earlier than hash
Jason Wang <[email protected]>
vhost: validate log when IOTLB is enabled
Roi Dayan <[email protected]>
net/mlx5e: Fix traffic being dropped on VF representor
Eran Ben Elisha <[email protected]>
net/mlx4_en: Fix mixed PFC and Global pause user control requests
Dave Watson <[email protected]>
strparser: Fix sign of err codes
Davide Caratti <[email protected]>
net/sched: fix NULL dereference on the error path of tcf_skbmod_init()
Davide Caratti <[email protected]>
net/sched: fix NULL dereference in the error path of tunnel_key_init()
Shahar Klein <[email protected]>
net/mlx5e: Sync netdev vxlan ports at open
Jianbo Liu <[email protected]>
net/mlx5e: Don't override vport admin link state in switchdev mode
David Lebrun <[email protected]>
ipv6: sr: fix seg6 encap performances with TSO enabled
Dirk van der Merwe <[email protected]>
nfp: use full 40 bits of the NSP buffer address
Davide Caratti <[email protected]>
net/sched: fix NULL dereference in the error path of tcf_sample_init()
Jianbo Liu <[email protected]>
net/mlx5e: Fix memory usage issues in offloading TC flows
Or Gerlitz <[email protected]>
net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path
Davide Caratti <[email protected]>
net/sched: fix NULL dereference in the error path of tcf_vlan_init()
Cong Wang <[email protected]>
net_sched: fix a missing idr_remove() in u32_delete_key()
Tal Gilboa <[email protected]>
net/mlx5e: Set EQE based as default TX interrupt moderation mode
Eric Dumazet <[email protected]>
vti6: better validate user provided tunnel names
Eric Dumazet <[email protected]>
ip6_tunnel: better validate user provided tunnel names
Eric Dumazet <[email protected]>
ip6_gre: better validate user provided tunnel names
Eric Dumazet <[email protected]>
ipv6: sit: better validate user provided tunnel names
Eric Dumazet <[email protected]>
ip_tunnel: better validate user provided tunnel names
Eric Dumazet <[email protected]>
net: fool proof dev_valid_name()
Xin Long <[email protected]>
bonding: process the err returned by dev_set_allmulti properly in bond_enslave
Xin Long <[email protected]>
bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave
Xin Long <[email protected]>
bonding: fix the err path for dev hwaddr sync in bond_enslave
David Ahern <[email protected]>
vrf: Fix use after free and double free in vrf_finish_output
Hangbin Liu <[email protected]>
vlan: also check phy_driver ts_info for vlan's real device
Jason Wang <[email protected]>
vhost: correctly remove wait queue during poll failure
Kai-Heng Feng <[email protected]>
sky2: Increase D3 delay to sky2 stops working after suspend
Eric Dumazet <[email protected]>
sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
Eric Dumazet <[email protected]>
sctp: do not leak kernel memory to user space
Heiner Kallweit <[email protected]>
r8169: fix setting driver_data after register_netdev
Eric Dumazet <[email protected]>
pptp: remove a buggy dst release in pptp_connect()
Davide Caratti <[email protected]>
net/sched: fix NULL dereference in the error path of tcf_bpf_init()
Craig Dillabaugh <[email protected]>
net sched actions: fix dumping which requires several messages to user space
Moshe Shemesh <[email protected]>
net/mlx5e: Verify coalescing parameters in range
Alexander Potapenko <[email protected]>
netlink: make sure nladdr has correct size in netlink_connect()
Jeff Barnhill <[email protected]>
net/ipv6: Increment OUTxxx counters after netfilter hook
David Ahern <[email protected]>
net/ipv6: Fix route leaking between VRFs
Eric Dumazet <[email protected]>
net: fix possible out-of-bound read in skb_network_protocol()
Andrew Lunn <[email protected]>
net: dsa: Discard frames from unused ports
Raghuram Chary J <[email protected]>
lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write)
Paolo Abeni <[email protected]>
ipv6: the entire IPv6 header chain must fit the first fragment
Miguel Fadon Perlines <[email protected]>
arp: fix arp_filter on l3slave devices
Borislav Petkov <[email protected]>
x86/microcode: Fix CPU synchronization routine
Borislav Petkov <[email protected]>
x86/microcode: Attempt late loading only when new microcode is present
Ashok Raj <[email protected]>
x86/microcode: Synchronize late microcode loading
Borislav Petkov <[email protected]>
x86/microcode: Request microcode on the BSP
Borislav Petkov <[email protected]>
x86/microcode/intel: Look into the patch cache first
Ashok Raj <[email protected]>
x86/microcode: Do not upload microcode if CPUs are offline
Ashok Raj <[email protected]>
x86/microcode/intel: Writeback and invalidate caches before updating microcode
Ashok Raj <[email protected]>
x86/microcode/intel: Check microcode revision before updating sibling threads
Borislav Petkov <[email protected]>
x86/microcode: Get rid of struct apply_microcode_ctx
Borislav Petkov <[email protected]>
x86/CPU: Check CPU feature bits after microcode upgrade
Borislav Petkov <[email protected]>
x86/CPU: Add a microcode loader callback
Borislav Petkov <[email protected]>
x86/microcode: Propagate return value from updating functions
Rodrigo Vivi <[email protected]>
drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
Rodrigo Vivi <[email protected]>
drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
Alexey Khoroshilov <[email protected]>
thermal: int3400_thermal: fix error handling in int3400_thermal_probe()
Mike Christie <[email protected]>
tcmu: release blocks for partially setup cmds
Jiri Olsa <[email protected]>
perf tools: Fix copyfile_offset update of output offset
Arnd Bergmann <[email protected]>
crypto: aes-generic - build with -Os on gcc-7+
Miquel Raynal <[email protected]>
mtd: mtd_oobtest: Handle bitflips during reads
Hans de Goede <[email protected]>
Input: goodix - disable IRQs while suspended
Nathan Fontenot <[email protected]>
ibmvnic: Don't handle RX interrupts when not up.
Andy Shevchenko <[email protected]>
sdhci: Advertise 2.0v supply on SDIO host controller
Jiri Bohac <[email protected]>
x86/gart: Exclude GART aperture from vmcore
Wei Yongjun <[email protected]>
gpio: thunderx: fix error return code in thunderx_gpio_probe()
Parav Pandit <[email protected]>
RDMA/cma: Fix rdma_cm path querying for RoCE
Shivasharan S <[email protected]>
scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called
Shivasharan S <[email protected]>
scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map
Ulf Hansson <[email protected]>
PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks
Arjun Vynipadath <[email protected]>
cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages
Yintian Tao <[email protected]>
drm/amd/powerplay: fix memory leakage when reload (v2)
Jacob Keller <[email protected]>
i40evf: don't rely on netif_running() outside rtnl_lock()
Stefan Wahren <[email protected]>
Bluetooth: hci_bcm: Make shutdown and device wake GPIO optional
Ronald Tschalär <[email protected]>
Bluetooth: hci_bcm: Validate IRQ before using it
Lukas Wunner <[email protected]>
Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO
Stephen Hemminger <[email protected]>
uio_hv_generic: check that host supports monitor page
Christophe JAILLET <[email protected]>
EDAC, mv64x60: Fix an error handling path
Hans de Goede <[email protected]>
serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers
Paolo Valente <[email protected]>
block, bfq: put async queues for root bfq groups too
Tony Lindgren <[email protected]>
tty: n_gsm: Allow ADM response in addition to UA for control dlci
Ming Lei <[email protected]>
blk-mq: fix kernel oops in blk_mq_tag_idle()
Feras Daoud <[email protected]>
net/mlx5e: IPoIB, Use correct timestamp in child receive flow
chenxiang <[email protected]>
scsi: libsas: initialize sas_phy status according to response of DISCOVER
Jason Yan <[email protected]>
scsi: libsas: fix error when getting phy events
Jason Yan <[email protected]>
scsi: libsas: fix memory leak in sas_smp_get_phy_events()
Gal Pressman <[email protected]>
net: Fix netdev_WARN_ONCE macro
Jason Yan <[email protected]>
scsi: libsas: Use dynamic alloced work to avoid sas event lost
Tang Junhui <[email protected]>
bcache: segregate flash only volume write streams
Tang Junhui <[email protected]>
bcache: stop writeback thread after detaching
Rui Hua <[email protected]>
bcache: ret IOERR when read meets metadata error
Fuyun Liang <[email protected]>
net: hns3: fix for changing MTU
Jian Shen <[email protected]>
net: hns3: Fix an error macro definition of HNS3_TQP_STAT
Jian Shen <[email protected]>
net: hns3: Fix a loop index error of tqp statistics query
Jian Shen <[email protected]>
net: hns3: Fix an error of total drop packet statistics
Daniel Jurgens <[email protected]>
net/mlx5: Fix race for multiple RoCE enable
Colin Ian King <[email protected]>
wl1251: check return from call to wl1251_acx_arp_ip_filter
Stanislaw Gruszka <[email protected]>
rt2x00: do not pause queue unconditionally on error path
Hans de Goede <[email protected]>
power: supply: axp288_charger: Properly stop work on probe-error / remove
Christophe JAILLET <[email protected]>
ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
NeilBrown <[email protected]>
staging: lustre: disable preempt while sampling processor id.
Jin Yao <[email protected]>
perf report: Fix a no annotate browser displayed issue
Javier Martinez Canillas <[email protected]>
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
James Smart <[email protected]>
nvme_fcloop: fix abort race condition
James Smart <[email protected]>
nvme_fcloop: disassocate local port structs
Hans de Goede <[email protected]>
pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts
Christoph Hellwig <[email protected]>
nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
Roy Shterman <[email protected]>
nvme-fabrics: protect against module unload during create_ctrl
Robert Jarzmik <[email protected]>
backlight: tdo24m: Fix the SPI CS between transfers
Ming Lei <[email protected]>
blk-mq: fix race between updating nr_hw_queues and switching io sched
Ming Lei <[email protected]>
blk-mq: avoid to map CPU into stale hw queue
Mike Marciniszyn <[email protected]>
IB/rdmavt: Allocate CQ memory on the correct node
Gautham R. Shenoy <[email protected]>
powernv-cpufreq: Add helper to extract pstate from PMSR
Catalin Marinas <[email protected]>
arm64: asid: Do not replace active_asids if already 0
Linus Walleij <[email protected]>
gpio: label descriptors using the device name
Christian Lamparter <[email protected]>
crypto: crypto4xx - perform aead icv check in the driver
Pieter \"PoroCYon\" Sluys <[email protected]>
vfb: fix video mode and line_length being set when loaded
Peter Große <[email protected]>
mac80211: Fix setting TX power on monitor interfaces
Geert Uytterhoeven <[email protected]>
ACPI: EC: Fix debugfs_create_*() usage
Shanker Donthineni <[email protected]>
irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry
Wei Yongjun <[email protected]>
irqchip/ompic: fix return value check in ompic_of_init()
Chaitra P B <[email protected]>
scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.
Rafael David Tinoco <[email protected]>
scsi: libiscsi: Allow sd_shutdown on bad transport
oulijun <[email protected]>
RDMA/hns: Update the usage of sr_max and rr_max field
Geert Uytterhoeven <[email protected]>
spi: sh-msiof: Fix timeout failures for TX-only DMA transfers
Alex Estrin <[email protected]>
IB/ipoib: Fix for notify send CQ failure messages
Archit Taneja <[email protected]>
drm/msm: Fix NULL deref in adreno_load_gpu
Hans de Goede <[email protected]>
ASoC: Intel: cht_bsw_rt5645: Analog Mic support
Pardha Saradhi K <[email protected]>
ASoC: Intel: Skylake: Disable clock gating during firmware and library download
Mauro Carvalho Chehab <[email protected]>
media: videobuf2-core: don't go out of the buffer range
Jernej Škrabec <[email protected]>
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
Chao Yu <[email protected]>
f2fs: fix lock dependency in between dio_rwsem & i_mmap_sem
Maciej Purski <[email protected]>
hwmon: (ina2xx) Make calibration register value fixed
Leon Romanovsky <[email protected]>
RDMA/cma: Mark end of CMA ID messages
Geert Uytterhoeven <[email protected]>
thermal/drivers/hisi: Remove bogus const from function return type
Sowmini Varadhan <[email protected]>
selftests/net: fix bugs in address and port initialization
Nogah Frankel <[email protected]>
net_sch: red: Fix the new offload indication
Vladimir Zapolskiy <[email protected]>
gpiolib: don't dereference a desc before validation
Gustavo A. R. Silva <[email protected]>
PM / devfreq: Fix potential NULL pointer dereference in governor_store
Jerome Brunet <[email protected]>
clk: divider: fix incorrect usage of container_of
Oleksij Rempel <[email protected]>
watchdog: dw_wdt: add stop watchdog operation
NeilBrown <[email protected]>
VFS: close race between getcwd() and d_move()
Maor Gottlieb <[email protected]>
IB/mlx5: Report inner RSS capability
Moni Shoua <[email protected]>
net/mlx4_en: Change default QoS settings
Hans de Goede <[email protected]>
ACPI / video: Default lcd_only to true on Win8-ready and newer machines
Sowmini Varadhan <[email protected]>
rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
Hangbin Liu <[email protected]>
l2tp: fix missing print session offset info
Fuyun Liang <[email protected]>
net: hns3: add Asym Pause support to phy default features
Fuyun Liang <[email protected]>
net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
Peng Li <[email protected]>
net: hns3: free the ring_data structrue when change tqps
Mengting Zhang <[email protected]>
perf evsel: Enable ignore_missing_thread for pid option
Jiri Olsa <[email protected]>
perf evsel: Fix swap for samples with raw data
Masami Hiramatsu <[email protected]>
perf probe: Add warning message if there is unexpected event name
Masami Hiramatsu <[email protected]>
perf probe: Find versioned symbols from map
Yi Zeng <[email protected]>
thermal: power_allocator: fix one race condition issue for thermal_instances list
Tobias Brunner <[email protected]>
ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT
Ioan Moldovan <[email protected]>
Bluetooth: Add a new 04ca:3015 QCA_ROME device
Rasmus Villemoes <[email protected]>
ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node
Martin Blumenstingl <[email protected]>
clk: meson: mpll: use 64-bit maths in params_from_rate
Tatyana Nikolova <[email protected]>
i40iw: Validate correct IRD/ORD connection parameters
Shiraz Saleem <[email protected]>
i40iw: Correct Q1/XF object count equation
Shiraz Saleem <[email protected]>
i40iw: Fix sequence number for the first partial FPDU
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
arch/arm64/mm/context.c | 19 ++-
arch/x86/include/asm/microcode.h | 10 +-
arch/x86/include/asm/processor.h | 1 +
arch/x86/kernel/aperture_64.c | 46 +++++-
arch/x86/kernel/cpu/common.c | 30 ++++
arch/x86/kernel/cpu/microcode/amd.c | 44 +++--
arch/x86/kernel/cpu/microcode/core.c | 181 ++++++++++++++++-----
arch/x86/kernel/cpu/microcode/intel.c | 62 +++++--
arch/x86/xen/mmu_hvm.c | 2 +-
block/bfq-cgroup.c | 7 +-
block/blk-mq.c | 29 +++-
crypto/Makefile | 1 +
drivers/acpi/acpi_video.c | 14 +-
drivers/acpi/ec.c | 2 +-
drivers/acpi/ec_sys.c | 2 +-
drivers/acpi/internal.h | 2 +-
drivers/base/power/domain.c | 30 ++--
drivers/bluetooth/btusb.c | 1 +
drivers/bluetooth/hci_bcm.c | 25 ++-
drivers/char/tpm/tpm-interface.c | 28 +++-
drivers/char/tpm/tpm.h | 5 +
drivers/clk/clk-divider.c | 7 +-
drivers/clk/hisilicon/clkdivider-hi6220.c | 2 +-
drivers/clk/meson/clk-mpll.c | 2 +-
drivers/clk/nxp/clk-lpc32xx.c | 2 +-
drivers/clk/qcom/clk-regmap-divider.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 4 +-
drivers/clk/sunxi-ng/ccu_div.c | 2 +-
drivers/cpufreq/powernv-cpufreq.c | 37 +++--
drivers/crypto/amcc/crypto4xx_alg.c | 6 +-
drivers/crypto/amcc/crypto4xx_core.c | 54 +++---
drivers/devfreq/devfreq.c | 3 +-
drivers/edac/mv64x60_edac.c | 2 +-
drivers/gpio/gpio-thunderx.c | 4 +-
drivers/gpio/gpiolib.c | 6 +-
drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c | 6 +
drivers/gpu/drm/i915/intel_bios.c | 12 +-
drivers/gpu/drm/msm/adreno/adreno_device.c | 7 +-
drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 2 +-
drivers/hwmon/ina2xx.c | 87 +++++-----
drivers/infiniband/core/cma.c | 1 +
drivers/infiniband/core/ucma.c | 7 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 27 +--
drivers/infiniband/hw/i40iw/i40iw_cm.c | 5 +-
drivers/infiniband/hw/i40iw/i40iw_ctrl.c | 6 +-
drivers/infiniband/hw/i40iw/i40iw_d.h | 1 +
drivers/infiniband/hw/i40iw/i40iw_puda.c | 2 +-
drivers/infiniband/hw/mlx5/main.c | 3 +-
drivers/infiniband/sw/rdmavt/cq.c | 10 +-
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 10 +-
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 2 +-
drivers/input/touchscreen/goodix.c | 8 +-
drivers/irqchip/irq-gic-v3.c | 11 ++
drivers/irqchip/irq-ompic.c | 4 +-
drivers/md/bcache/alloc.c | 19 ++-
drivers/md/bcache/request.c | 22 +++
drivers/md/bcache/super.c | 6 +
drivers/media/v4l2-core/videobuf2-core.c | 4 +
drivers/mmc/host/sdhci-pci-core.c | 2 +
drivers/mmc/host/sdhci.c | 7 +
drivers/mtd/tests/oobtest.c | 21 +++
drivers/net/bonding/bond_main.c | 73 +++++----
drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 23 ++-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
.../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 17 +-
.../ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 13 +-
drivers/net/ethernet/ibm/ibmvnic.c | 6 +
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 20 ++-
drivers/net/ethernet/marvell/sky2.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 77 +++++----
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 33 ++--
drivers/net/ethernet/mellanox/mlx4/en_main.c | 4 +-
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 +
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 +
.../net/ethernet/mellanox/mlx4/resource_tracker.c | 1 +
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 17 ++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 17 +-
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 26 +--
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 18 +-
drivers/net/ethernet/mellanox/mlx5/core/vport.c | 33 +++-
.../net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c | 9 +-
drivers/net/ethernet/realtek/r8169.c | 4 +-
drivers/net/ppp/pptp.c | 1 -
drivers/net/team/team.c | 12 +-
drivers/net/usb/lan78xx.c | 23 ++-
drivers/net/vrf.c | 5 +-
drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 22 ++-
drivers/net/wireless/ti/wl1251/main.c | 3 +-
drivers/nvme/host/fabrics.c | 15 +-
drivers/nvme/host/fabrics.h | 2 +
drivers/nvme/host/fc.c | 1 +
drivers/nvme/host/rdma.c | 1 +
drivers/nvme/target/fcloop.c | 47 ++++--
drivers/nvme/target/loop.c | 1 +
drivers/pinctrl/intel/pinctrl-baytrail.c | 6 +
drivers/power/supply/axp288_charger.c | 13 ++
drivers/rtc/rtc-ac100.c | 6 +-
drivers/scsi/libiscsi.c | 24 ++-
drivers/scsi/libsas/sas_event.c | 74 +++++++--
drivers/scsi/libsas/sas_expander.c | 4 +-
drivers/scsi/libsas/sas_init.c | 27 ++-
drivers/scsi/libsas/sas_internal.h | 6 +
drivers/scsi/libsas/sas_phy.c | 44 +----
drivers/scsi/libsas/sas_port.c | 18 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
drivers/scsi/megaraid/megaraid_sas_fp.c | 16 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 ++--
drivers/spi/spi-sh-msiof.c | 12 +-
.../staging/lustre/lnet/libcfs/linux/linux-cpu.c | 13 +-
drivers/target/target_core_user.c | 7 +
drivers/thermal/hisi_thermal.c | 2 +-
drivers/thermal/int340x_thermal/int3400_thermal.c | 10 +-
drivers/thermal/power_allocator.c | 2 +
drivers/tty/n_gsm.c | 17 +-
drivers/tty/serdev/core.c | 5 +
drivers/uio/uio_hv_generic.c | 7 +
drivers/vhost/net.c | 4 +-
drivers/vhost/vhost.c | 17 +-
drivers/video/backlight/corgi_lcd.c | 2 +-
drivers/video/backlight/tdo24m.c | 2 +-
drivers/video/backlight/tosa_lcd.c | 2 +-
drivers/video/fbdev/vfb.c | 17 ++
drivers/watchdog/dw_wdt.c | 18 +-
fs/dcache.c | 23 ++-
fs/f2fs/file.c | 20 +--
include/linux/clk-provider.h | 2 +-
include/linux/mlx5/driver.h | 2 +-
include/linux/netdevice.h | 4 +-
include/scsi/libsas.h | 17 +-
include/uapi/rdma/mlx5-abi.h | 2 +-
net/8021q/vlan_dev.c | 6 +-
net/core/dev.c | 4 +-
net/dsa/dsa_priv.h | 8 +-
net/ipv4/arp.c | 2 +-
net/ipv4/fib_semantics.c | 20 ++-
net/ipv4/ip_tunnel.c | 11 +-
net/ipv6/ip6_gre.c | 8 +-
net/ipv6/ip6_output.c | 28 +++-
net/ipv6/ip6_tunnel.c | 11 +-
net/ipv6/ip6_vti.c | 7 +-
net/ipv6/route.c | 3 +
net/ipv6/seg6_iptunnel.c | 16 +-
net/ipv6/sit.c | 8 +-
net/l2tp/l2tp_netlink.c | 2 +
net/mac80211/cfg.c | 28 +++-
net/mac80211/driver-ops.h | 3 +-
net/netlink/af_netlink.c | 3 +
net/rds/bind.c | 1 +
net/sched/act_api.c | 4 +-
net/sched/act_bpf.c | 12 +-
net/sched/act_sample.c | 3 +-
net/sched/act_skbmod.c | 3 +-
net/sched/act_tunnel_key.c | 9 +-
net/sched/act_vlan.c | 3 +-
net/sched/cls_u32.c | 1 +
net/sched/sch_red.c | 26 +--
net/sctp/ipv6.c | 4 +-
net/sctp/socket.c | 13 +-
net/strparser/strparser.c | 4 +-
sound/soc/intel/atom/sst/sst_stream.c | 2 +-
sound/soc/intel/boards/cht_bsw_rt5645.c | 7 +
sound/soc/intel/skylake/skl-messages.c | 4 +
sound/soc/intel/skylake/skl-pcm.c | 4 +
tools/perf/arch/powerpc/util/sym-handling.c | 8 +
tools/perf/builtin-record.c | 4 +-
tools/perf/builtin-report.c | 18 +-
tools/perf/util/evsel.c | 67 +++++++-
tools/perf/util/probe-event.c | 28 +++-
tools/perf/util/python-ext-sources | 1 +
tools/perf/util/symbol.c | 5 +
tools/perf/util/symbol.h | 1 +
tools/perf/util/util.c | 2 +-
tools/testing/selftests/net/msg_zerocopy.c | 21 ++-
177 files changed, 1711 insertions(+), 705 deletions(-)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tatyana Nikolova <[email protected]>
[ Upstream commit ce9ce74145aa6814a370a9ff4f5a1d719baaced1 ]
Casting to u16 before validating IRD/ORD connection
parameters could cause recording wrong IRD/ORD values
in the cm_node. Validate the IRD/ORD parameters as
they are passed by the application before recording
them.
Fixes: f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <[email protected]>
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/i40iw/i40iw_cm.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -125,7 +125,8 @@ static u8 i40iw_derive_hw_ird_setting(u1
* @conn_ird: connection IRD
* @conn_ord: connection ORD
*/
-static void i40iw_record_ird_ord(struct i40iw_cm_node *cm_node, u16 conn_ird, u16 conn_ord)
+static void i40iw_record_ird_ord(struct i40iw_cm_node *cm_node, u32 conn_ird,
+ u32 conn_ord)
{
if (conn_ird > I40IW_MAX_IRD_SIZE)
conn_ird = I40IW_MAX_IRD_SIZE;
@@ -3849,7 +3850,7 @@ int i40iw_connect(struct iw_cm_id *cm_id
}
cm_node->apbvt_set = true;
- i40iw_record_ird_ord(cm_node, (u16)conn_param->ird, (u16)conn_param->ord);
+ i40iw_record_ird_ord(cm_node, conn_param->ird, conn_param->ord);
if (cm_node->send_rdma0_op == SEND_RDMA_READ_ZERO &&
!cm_node->ord_size)
cm_node->ord_size = 1;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Zeng <[email protected]>
[ Upstream commit a5de11d67dcd268b8d0beb73dc374de5e97f0caf ]
When invoking allow_maximum_power and traverse tz->thermal_instances,
we should grab thermal_zone_device->lock to avoid race condition. For
example, during the system reboot, if the mali GPU device implements
device shutdown callback and unregister GPU devfreq cooling device,
the deleted list head may be accessed to cause panic, as the following
log shows:
[ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070
[ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000
[ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000
[ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912
[ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check
[ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000
[ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4
[ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4
[ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145
[ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0
[ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020)
[ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000)
[ 34.819822] c3 25 (kworker/3:0) Call trace:
[ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0)
[ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4
[ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224
[ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c
[ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c
[ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458
[ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4
[ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc
[ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40
[ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61)
[ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]---
Signed-off-by: Yi Zeng <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/power_allocator.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -523,6 +523,7 @@ static void allow_maximum_power(struct t
struct thermal_instance *instance;
struct power_allocator_params *params = tz->governor_data;
+ mutex_lock(&tz->lock);
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if ((instance->trip != params->trip_max_desired_temperature) ||
(!cdev_is_power_actor(instance->cdev)))
@@ -534,6 +535,7 @@ static void allow_maximum_power(struct t
mutex_unlock(&instance->cdev->lock);
thermal_cdev_update(instance->cdev);
}
+ mutex_unlock(&tz->lock);
}
/**
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vladimir Zapolskiy <[email protected]>
[ Upstream commit 30322bcf82d74cad0d6e1cf9ba7fa7fa48c7a026 ]
The fix restores a proper validation of an input gpio desc, which
might be needed to deal with optional GPIOs correctly.
Fixes: 02e479808b5d ("gpio: Alter semantics of *raw* operations to actually be raw")
Signed-off-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpiolib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2468,7 +2468,7 @@ EXPORT_SYMBOL_GPL(gpiod_direction_output
*/
int gpiod_direction_output(struct gpio_desc *desc, int value)
{
- struct gpio_chip *gc = desc->gdev->chip;
+ struct gpio_chip *gc;
int ret;
VALIDATE_DESC(desc);
@@ -2485,6 +2485,7 @@ int gpiod_direction_output(struct gpio_d
return -EIO;
}
+ gc = desc->gdev->chip;
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
/* First see if we can enable open drain in hardware */
ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chaitra P B <[email protected]>
[ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ]
1. In IO path, setting of "ATA command pending" flag early before device
removal, invalid device handle etc., checks causes any new commands
to be always returned with SAM_STAT_BUSY and when the driver removes
the drive the SML issues SYNC Cache command and that command is
always returned with SAM_STAT_BUSY and thus making SYNC Cache command
to requeued.
2. If the driver gets an ATA PT command for a SATA drive then the driver
set "ATA command pending" flag in device specific data structure not
to allow any further commands until the ATA PT command is completed.
However, after setting the flag if the driver decides to return the
command back to upper layers without actually issuing to the firmware
(i.e., returns from qcmd failure return paths) then the corresponding
flag is not cleared and this prevents the driver from sending any new
commands to the drive.
This patch fixes above two issues by setting of "ATA command pending"
flag after checking for whether device deleted, invalid device handle,
device busy with task management. And by setting "ATA command pending"
flag to false in all of the qcmd failure return paths after setting the
flag.
Signed-off-by: Chaitra P B <[email protected]>
Signed-off-by: Suganath Prabu S <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4761,19 +4761,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru
return 0;
}
- /*
- * Bug work around for firmware SATL handling. The loop
- * is based on atomic operations and ensures consistency
- * since we're lockless at this point
- */
- do {
- if (test_bit(0, &sas_device_priv_data->ata_command_pending)) {
- scmd->result = SAM_STAT_BUSY;
- scmd->scsi_done(scmd);
- return 0;
- }
- } while (_scsih_set_satl_pending(scmd, true));
-
sas_target_priv_data = sas_device_priv_data->sas_target;
/* invalid device handle */
@@ -4799,6 +4786,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru
sas_device_priv_data->block)
return SCSI_MLQUEUE_DEVICE_BUSY;
+ /*
+ * Bug work around for firmware SATL handling. The loop
+ * is based on atomic operations and ensures consistency
+ * since we're lockless at this point
+ */
+ do {
+ if (test_bit(0, &sas_device_priv_data->ata_command_pending)) {
+ scmd->result = SAM_STAT_BUSY;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ } while (_scsih_set_satl_pending(scmd, true));
+
if (scmd->sc_data_direction == DMA_FROM_DEVICE)
mpi_control = MPI2_SCSIIO_CONTROL_READ;
else if (scmd->sc_data_direction == DMA_TO_DEVICE)
@@ -4826,6 +4826,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru
if (!smid) {
pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
+ _scsih_set_satl_pending(scmd, false);
goto out;
}
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
@@ -4857,6 +4858,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru
pcie_device = sas_target_priv_data->pcie_dev;
if (ioc->build_sg_scmd(ioc, scmd, smid, pcie_device)) {
mpt3sas_base_free_smid(ioc, smid);
+ _scsih_set_satl_pending(scmd, false);
goto out;
}
} else
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sowmini Varadhan <[email protected]>
[ Upstream commit 7ae0c649c47f1c5d2db8cee6dd75855970af1669 ]
If the rds_sock is not added to the bind_hash_table, we must
reset rs_bound_addr so that rds_remove_bound will not trip on
this rds_sock.
rds_add_bound() does a rds_sock_put() in this failure path, so
failing to reset rs_bound_addr will result in a socket refcount
bug, and will trigger a WARN_ON with the stack shown below when
the application subsequently tries to close the PF_RDS socket.
WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \
rds_sock_destruct+0x15/0x30 [rds]
:
__sk_destruct+0x21/0x190
rds_remove_bound.part.13+0xb6/0x140 [rds]
rds_release+0x71/0x120 [rds]
sock_release+0x1a/0x70
sock_close+0xe/0x20
__fput+0xd5/0x210
task_work_run+0x82/0xa0
do_exit+0x2ce/0xb30
? syscall_trace_enter+0x1cc/0x2b0
do_group_exit+0x39/0xa0
SyS_exit_group+0x10/0x10
do_syscall_64+0x61/0x1a0
Signed-off-by: Sowmini Varadhan <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rds/bind.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/rds/bind.c
+++ b/net/rds/bind.c
@@ -114,6 +114,7 @@ static int rds_add_bound(struct rds_sock
rs, &addr, (int)ntohs(*port));
break;
} else {
+ rs->rs_bound_addr = 0;
rds_sock_put(rs);
ret = -ENOMEM;
break;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 3522f867c13b63cf62acdf1b8ca5664c549a716a ]
acpi_ec.gpe is "unsigned long", hence treating it as "u32" would expose
the wrong half on big-endian 64-bit systems. Fix this by changing its
type to "u32" and removing the cast, as all other code already uses u32
or sometimes even only u8.
Fixes: 1195a098168fcacf (ACPI: Provide /sys/kernel/debug/ec/...)
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/ec.c | 2 +-
drivers/acpi/ec_sys.c | 2 +-
drivers/acpi/internal.h | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1516,7 +1516,7 @@ static int acpi_ec_setup(struct acpi_ec
}
acpi_handle_info(ec->handle,
- "GPE=0x%lx, EC_CMD/EC_SC=0x%lx, EC_DATA=0x%lx\n",
+ "GPE=0x%x, EC_CMD/EC_SC=0x%lx, EC_DATA=0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
return ret;
}
--- a/drivers/acpi/ec_sys.c
+++ b/drivers/acpi/ec_sys.c
@@ -128,7 +128,7 @@ static int acpi_ec_add_debugfs(struct ac
return -ENOMEM;
}
- if (!debugfs_create_x32("gpe", 0444, dev_dir, (u32 *)&first_ec->gpe))
+ if (!debugfs_create_x32("gpe", 0444, dev_dir, &first_ec->gpe))
goto error;
if (!debugfs_create_bool("use_global_lock", 0444, dev_dir,
&first_ec->global_lock))
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -159,7 +159,7 @@ static inline void acpi_early_processor_
-------------------------------------------------------------------------- */
struct acpi_ec {
acpi_handle handle;
- unsigned long gpe;
+ u32 gpe;
unsigned long command_addr;
unsigned long data_addr;
bool global_lock;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Marinas <[email protected]>
[ Upstream commit a8ffaaa060b8d4da6138e0958cb0f45b73e1cb78 ]
Under some uncommon timing conditions, a generation check and
xchg(active_asids, A1) in check_and_switch_context() on P1 can race with
an ASID roll-over on P2. If P2 has not seen the update to
active_asids[P1], it can re-allocate A1 to a new task T2 on P2. P1 ends
up waiting on the spinlock since the xchg() returned 0 while P2 can go
through a second ASID roll-over with (T2,A1,G2) active on P2. This
roll-over copies active_asids[P1] == A1,G1 into reserved_asids[P1] and
active_asids[P2] == A1,G2 into reserved_asids[P2]. A subsequent
scheduling of T1 on P1 and T2 on P2 would match reserved_asids and get
their generation bumped to G3:
P1 P2
-- --
TTBR0.BADDR = T0
TTBR0.ASID = A0
asid_generation = G1
check_and_switch_context(T1,A1,G1)
generation match
check_and_switch_context(T2,A0,G0)
new_context()
ASID roll-over
asid_generation = G2
flush_context()
active_asids[P1] = 0
asid_map[A1] = 0
reserved_asids[P1] = A0,G0
xchg(active_asids, A1)
active_asids[P1] = A1,G1
xchg returns 0
spin_lock_irqsave()
allocated ASID (T2,A1,G2)
asid_map[A1] = 1
active_asids[P2] = A1,G2
...
check_and_switch_context(T3,A0,G0)
new_context()
ASID roll-over
asid_generation = G3
flush_context()
active_asids[P1] = 0
asid_map[A1] = 1
reserved_asids[P1] = A1,G1
reserved_asids[P2] = A1,G2
allocated ASID (T3,A2,G3)
asid_map[A2] = 1
active_asids[P2] = A2,G3
new_context()
check_update_reserved_asid(A1,G1)
matches reserved_asid[P1]
reserved_asid[P1] = A1,G3
updated T1 ASID to (T1,A1,G3)
check_and_switch_context(T2,A1,G2)
new_context()
check_and_switch_context(A1,G2)
matches reserved_asids[P2]
reserved_asids[P2] = A1,G3
updated T2 ASID to (T2,A1,G3)
At this point, we have two tasks, T1 and T2 both using ASID A1 with the
latest generation G3. Any of them is allowed to be scheduled on the
other CPU leading to two different tasks with the same ASID on the same
CPU.
This patch changes the xchg to cmpxchg so that the active_asids is only
updated if non-zero to avoid a race with an ASID roll-over on a
different CPU.
The ASID allocation algorithm has been formally verified using the TLA+
model checker (see
https://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/kernel-tla.git/tree/asidalloc.tla
for the spec).
Reviewed-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/context.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -194,26 +194,29 @@ set_asid:
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
{
unsigned long flags;
- u64 asid;
+ u64 asid, old_active_asid;
asid = atomic64_read(&mm->context.id);
/*
* The memory ordering here is subtle.
- * If our ASID matches the current generation, then we update
- * our active_asids entry with a relaxed xchg. Racing with a
- * concurrent rollover means that either:
+ * If our active_asids is non-zero and the ASID matches the current
+ * generation, then we update the active_asids entry with a relaxed
+ * cmpxchg. Racing with a concurrent rollover means that either:
*
- * - We get a zero back from the xchg and end up waiting on the
+ * - We get a zero back from the cmpxchg and end up waiting on the
* lock. Taking the lock synchronises with the rollover and so
* we are forced to see the updated generation.
*
- * - We get a valid ASID back from the xchg, which means the
+ * - We get a valid ASID back from the cmpxchg, which means the
* relaxed xchg in flush_context will treat us as reserved
* because atomic RmWs are totally ordered for a given location.
*/
- if (!((asid ^ atomic64_read(&asid_generation)) >> asid_bits)
- && atomic64_xchg_relaxed(&per_cpu(active_asids, cpu), asid))
+ old_active_asid = atomic64_read(&per_cpu(active_asids, cpu));
+ if (old_active_asid &&
+ !((asid ^ atomic64_read(&asid_generation)) >> asid_bits) &&
+ atomic64_cmpxchg_relaxed(&per_cpu(active_asids, cpu),
+ old_active_asid, asid))
goto switch_mm_fastpath;
raw_spin_lock_irqsave(&cpu_asid_lock, flags);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jian Shen <[email protected]>
[ Upstream commit 94bfaafac9d2a3c0bcca00d01e38f7597b741799 ]
An error loop index was used while querying statistics data
of tqps, which may cause call trace.
Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c
@@ -455,13 +455,13 @@ static u64 *hns3_get_stats_tqps(struct h
struct hnae3_knic_private_info *kinfo = &handle->kinfo;
struct hns3_enet_ring *ring;
u8 *stat;
- u32 i;
+ int i, j;
/* get stats for Tx */
for (i = 0; i < kinfo->num_tqps; i++) {
ring = nic_priv->ring_data[i].ring;
- for (i = 0; i < HNS3_TXQ_STATS_COUNT; i++) {
- stat = (u8 *)ring + hns3_txq_stats[i].stats_offset;
+ for (j = 0; j < HNS3_TXQ_STATS_COUNT; j++) {
+ stat = (u8 *)ring + hns3_txq_stats[j].stats_offset;
*data++ = *(u64 *)stat;
}
}
@@ -469,8 +469,8 @@ static u64 *hns3_get_stats_tqps(struct h
/* get stats for Rx */
for (i = 0; i < kinfo->num_tqps; i++) {
ring = nic_priv->ring_data[i + kinfo->num_tqps].ring;
- for (i = 0; i < HNS3_RXQ_STATS_COUNT; i++) {
- stat = (u8 *)ring + hns3_rxq_stats[i].stats_offset;
+ for (j = 0; j < HNS3_RXQ_STATS_COUNT; j++) {
+ stat = (u8 *)ring + hns3_rxq_stats[j].stats_offset;
*data++ = *(u64 *)stat;
}
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Smart <[email protected]>
[ Upstream commit 6fda20283e55b9d288cd56822ce39fc8e64f2208 ]
The current fcloop driver gets its lport structure from the private
area co-allocated with the fc_localport. All is fine except the
teardown path, which wants to wait on the completion, which is marked
complete by the delete_localport callback performed after
unregister_localport. The issue is, the nvme_fc transport frees the
localport structure immediately after delete_localport is called,
meaning the original routine is trying to wait on a complete that
was just freed.
Change such that a lport struct is allocated coincident with the
addition and registration of a localport. The private area of the
localport now contains just a backpointer to the real lport struct.
Now, the completion can be waited for, and after completing, the
new structure can be kfree'd.
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/target/fcloop.c | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -204,6 +204,10 @@ struct fcloop_lport {
struct completion unreg_done;
};
+struct fcloop_lport_priv {
+ struct fcloop_lport *lport;
+};
+
struct fcloop_rport {
struct nvme_fc_remote_port *remoteport;
struct nvmet_fc_target_port *targetport;
@@ -657,7 +661,8 @@ fcloop_nport_get(struct fcloop_nport *np
static void
fcloop_localport_delete(struct nvme_fc_local_port *localport)
{
- struct fcloop_lport *lport = localport->private;
+ struct fcloop_lport_priv *lport_priv = localport->private;
+ struct fcloop_lport *lport = lport_priv->lport;
/* release any threads waiting for the unreg to complete */
complete(&lport->unreg_done);
@@ -697,7 +702,7 @@ static struct nvme_fc_port_template fcte
.max_dif_sgl_segments = FCLOOP_SGL_SEGS,
.dma_boundary = FCLOOP_DMABOUND_4G,
/* sizes of additional private data for data structures */
- .local_priv_sz = sizeof(struct fcloop_lport),
+ .local_priv_sz = sizeof(struct fcloop_lport_priv),
.remote_priv_sz = sizeof(struct fcloop_rport),
.lsrqst_priv_sz = sizeof(struct fcloop_lsreq),
.fcprqst_priv_sz = sizeof(struct fcloop_ini_fcpreq),
@@ -728,11 +733,17 @@ fcloop_create_local_port(struct device *
struct fcloop_ctrl_options *opts;
struct nvme_fc_local_port *localport;
struct fcloop_lport *lport;
- int ret;
+ struct fcloop_lport_priv *lport_priv;
+ unsigned long flags;
+ int ret = -ENOMEM;
+
+ lport = kzalloc(sizeof(*lport), GFP_KERNEL);
+ if (!lport)
+ return -ENOMEM;
opts = kzalloc(sizeof(*opts), GFP_KERNEL);
if (!opts)
- return -ENOMEM;
+ goto out_free_lport;
ret = fcloop_parse_options(opts, buf);
if (ret)
@@ -752,23 +763,25 @@ fcloop_create_local_port(struct device *
ret = nvme_fc_register_localport(&pinfo, &fctemplate, NULL, &localport);
if (!ret) {
- unsigned long flags;
-
/* success */
- lport = localport->private;
+ lport_priv = localport->private;
+ lport_priv->lport = lport;
+
lport->localport = localport;
INIT_LIST_HEAD(&lport->lport_list);
spin_lock_irqsave(&fcloop_lock, flags);
list_add_tail(&lport->lport_list, &fcloop_lports);
spin_unlock_irqrestore(&fcloop_lock, flags);
-
- /* mark all of the input buffer consumed */
- ret = count;
}
out_free_opts:
kfree(opts);
+out_free_lport:
+ /* free only if we're going to fail */
+ if (ret)
+ kfree(lport);
+
return ret ? ret : count;
}
@@ -790,6 +803,8 @@ __wait_localport_unreg(struct fcloop_lpo
wait_for_completion(&lport->unreg_done);
+ kfree(lport);
+
return ret;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ioan Moldovan <[email protected]>
[ Upstream commit 0a03f98b98c201191e3ba15a0e33f46d8660e1fd ]
This patch adds the 04ca:3015 (from a QCA9377 board) Bluetooth device
to the btusb blacklist and makes the kernel use the btqca module
instead of btusb. The patch is necessary because, without it the
04ca:3015 device defaults to using the btusb driver, which makes the
WIFI side of the QCA9377 board unusable (obtains 0 MBps in speedtest,
when the 04ca:3015 bluetooth is used with an audio headset).
/sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3015 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Ioan Moldovan <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -272,6 +272,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
+ { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
/* Broadcom BCM2035 */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit 7d09995dcb0577b4a56aad7f2bb56f28604e8f1a ]
ACPI enumerated serdev-controllers do not have an ACPI companion, the ACPI
companion belongs to the serdev-device child of the serdev-controller, not
to the controller itself. This was causing serdev_uevent to always return
-ENODEV when called on a serdev-controller leading to errors like these:
kernel: serial serial0: uevent: failed to send synthetic uevent
being logged. This commit modifies serdev_uevent to directly return 0
when called on an ACPI enumerated serdev-controller fixing this.
Note: I do not think that setting a modalias on a devicetree enumerated
serdev-controller makes sense either. So perhaps the !dev->of_node part of
the check can be dropped too, but I'm not entirely sure that doing this
on devicetree too is correct.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serdev/core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -54,6 +54,11 @@ static int serdev_uevent(struct device *
int rc;
/* TODO: platform modalias */
+
+ /* ACPI enumerated controllers do not have a modalias */
+ if (!dev->of_node && dev->type == &serdev_ctrl_type)
+ return 0;
+
rc = acpi_device_uevent_modalias(dev, env);
if (rc != -ENODEV)
return rc;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit 5928c281524fe451114e04f1dfa11246a37e859f ]
We're seeing a lot of bogus backlight interfaces on newer machines without
a LCD such as desktops, servers and HDMI sticks. This causes userspace to
show a non-functional brightness slider in e.g. the GNOME3 system menu,
which is undesirable. And, in general, we should simply just not register
a non functional backlight interface.
Checking the LCD flag causes the bogus acpi_video backlight interfaces to
go away (on the machines this was tested on).
This change sets the lcd_only option by default on any machines which
are Win8-ready, to fix this.
This is not entirely without a risk of regressions, but video_detect.c
already prefers native-backlight interfaces over the acpi_video one
on Win8-ready machines, calling acpi_video_unregister_backlight() as soon
as a native interface shows up. This is done because the ACPI backlight
interface often is broken on Win8-ready machines, because win8 does not
seem to actually use it.
So in practice we already end up not registering the ACPI backlight
interface on (most) Win8-ready machines with a LCD panel, thus this
change does not change anything for (most) machines with a LCD panel
and on machines without a LCD panel we actually don't want to register
any backlight interfaces.
This has been tested on the following machines and fixes a bogus backlight
interface showing up there:
- Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx
- Intel Compute Stick STK1AW32SC
- Meegopad T08 HDMI stick
Bogus backlight interfaces have also been reported on:
- Desktop with Asus H87I-Plus m.b.
- Desktop with ASRock B75M-ITX m.b.
- Desktop with Gigabyte Z87-D3HP m.b.
- Dell PowerEdge T20 desktop
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpi_video.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -80,8 +80,8 @@ MODULE_PARM_DESC(report_key_events,
static bool device_id_scheme = false;
module_param(device_id_scheme, bool, 0444);
-static bool only_lcd = false;
-module_param(only_lcd, bool, 0444);
+static int only_lcd = -1;
+module_param(only_lcd, int, 0444);
static int register_count;
static DEFINE_MUTEX(register_count_mutex);
@@ -2136,6 +2136,16 @@ int acpi_video_register(void)
goto leave;
}
+ /*
+ * We're seeing a lot of bogus backlight interfaces on newer machines
+ * without a LCD such as desktops, servers and HDMI sticks. Checking
+ * the lcd flag fixes this, so enable this on any machines which are
+ * win8 ready (where we also prefer the native backlight driver, so
+ * normally the acpi_video code should not register there anyways).
+ */
+ if (only_lcd == -1)
+ only_lcd = acpi_osi_is_win8();
+
dmi_check_system(video_dmi_table);
ret = acpi_bus_register_driver(&acpi_video_bus);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chao Yu <[email protected]>
[ Upstream commit 21020812c9e1ab593367fad9ce579f842a0b406d ]
test/generic/208 reports a potential deadlock as below:
Chain exists of:
&mm->mmap_sem --> &fi->i_mmap_sem --> &fi->dio_rwsem[WRITE]
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fi->dio_rwsem[WRITE]);
lock(&fi->i_mmap_sem);
lock(&fi->dio_rwsem[WRITE]);
lock(&mm->mmap_sem);
This patch changes the lock dependency as below in fallocate() to
fix this issue:
- dio_rwsem
- i_mmap_sem
Fixes: bb06664a534b ("f2fs: avoid race in between GC and block exchange")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/file.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1186,14 +1186,14 @@ static int f2fs_collapse_range(struct in
pg_start = offset >> PAGE_SHIFT;
pg_end = (offset + len) >> PAGE_SHIFT;
+ /* avoid gc operation during block exchange */
+ down_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
+
down_write(&F2FS_I(inode)->i_mmap_sem);
/* write out all dirty pages from offset */
ret = filemap_write_and_wait_range(inode->i_mapping, offset, LLONG_MAX);
if (ret)
- goto out;
-
- /* avoid gc operation during block exchange */
- down_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
+ goto out_unlock;
truncate_pagecache(inode, offset);
@@ -1212,9 +1212,8 @@ static int f2fs_collapse_range(struct in
if (!ret)
f2fs_i_size_write(inode, new_size);
out_unlock:
- up_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
-out:
up_write(&F2FS_I(inode)->i_mmap_sem);
+ up_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
return ret;
}
@@ -1385,6 +1384,9 @@ static int f2fs_insert_range(struct inod
f2fs_balance_fs(sbi, true);
+ /* avoid gc operation during block exchange */
+ down_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
+
down_write(&F2FS_I(inode)->i_mmap_sem);
ret = truncate_blocks(inode, i_size_read(inode), true);
if (ret)
@@ -1395,9 +1397,6 @@ static int f2fs_insert_range(struct inod
if (ret)
goto out;
- /* avoid gc operation during block exchange */
- down_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
-
truncate_pagecache(inode, offset);
pg_start = offset >> PAGE_SHIFT;
@@ -1425,10 +1424,9 @@ static int f2fs_insert_range(struct inod
if (!ret)
f2fs_i_size_write(inode, new_size);
-
- up_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
out:
up_write(&F2FS_I(inode)->i_mmap_sem);
+ up_write(&F2FS_I(inode)->dio_rwsem[WRITE]);
return ret;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren <[email protected]>
[ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ]
Some devices have the control dlci stay in ADM mode instead of the UA
mode. This can seen at least on droid 4 when trying to open the ts
27.010 mux port. Enabling n_gsm debug mode shows the control dlci
always respond with DM to SABM instead of UA:
# modprobe n_gsm debug=0xff
# ldattach -d GSM0710 /dev/ttyS0 &
gsmld_output: 00000000: f9 03 3f 01 1c f9
--> 0) C: SABM(P)
gsmld_receive: 00000000: f9 03 1f 01 36 f9
<-- 0) C: DM(P)
...
$ minicom -D /dev/gsmtty1
minicom: cannot open /dev/gsmtty1: No error information
$ strace minicom -D /dev/gsmtty1
...
open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT
Note that this is different issue from other n_gsm -EL2HLT issues such
as timeouts when the control dlci does not respond at all.
The ADM mode seems to be a quite common according to "RF Wireless World"
article "GSM Issue-UE sends SABM and gets a DM response instead of
UA response":
This issue is most commonly observed in GSM networks where in UE sends
SABM and expects network to send UA response but it ends up receiving
DM response from the network. SABM stands for Set asynchronous balanced
mode, UA stands for Unnumbered Acknowledge and DA stands for
Disconnected Mode.
An RLP entity can be in one of two modes:
- Asynchronous Balanced Mode (ABM)
- Asynchronous Disconnected Mode (ADM)
Currently Linux kernel closes the control dlci after several retries
in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce
error code -EL2HLT when trying to open them as the closing of control
dlci has already set gsm->dead.
Let's fix the issue by allowing control dlci stay in ADM mode after the
retries so the /dev/gsmtty ports can be opened and used. It seems that
it might take several attempts to get any response from the control
dlci, so it's best to allow ADM mode only after the SABM retries are
done.
Note that for droid 4 additional patches are needed to mux the ttyS0
pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also
needed to use n_gsm. And the mdm6600 modem needs to be powered on.
Cc: [email protected]
Cc: Alan Cox <[email protected]>
Cc: Jiri Prchal <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Marcel Partap <[email protected]>
Cc: Michael Scott <[email protected]>
Cc: Peter Hurley <[email protected]>
Cc: Russ Gorby <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/n_gsm.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1451,6 +1451,10 @@ static void gsm_dlci_open(struct gsm_dlc
* in which case an opening port goes back to closed and a closing port
* is simply put into closed state (any further frames from the other
* end will get a DM response)
+ *
+ * Some control dlci can stay in ADM mode with other dlci working just
+ * fine. In that case we can just keep the control dlci open after the
+ * DLCI_OPENING retries time out.
*/
static void gsm_dlci_t1(struct timer_list *t)
@@ -1464,8 +1468,15 @@ static void gsm_dlci_t1(struct timer_lis
if (dlci->retries) {
gsm_command(dlci->gsm, dlci->addr, SABM|PF);
mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
- } else
+ } else if (!dlci->addr && gsm->control == (DM | PF)) {
+ if (debug & 8)
+ pr_info("DLCI %d opening in ADM mode.\n",
+ dlci->addr);
+ gsm_dlci_open(dlci);
+ } else {
gsm_dlci_close(dlci);
+ }
+
break;
case DLCI_CLOSING:
dlci->retries--;
@@ -1483,8 +1494,8 @@ static void gsm_dlci_t1(struct timer_lis
* @dlci: DLCI to open
*
* Commence opening a DLCI from the Linux side. We issue SABM messages
- * to the modem which should then reply with a UA, at which point we
- * will move into open state. Opening is done asynchronously with retry
+ * to the modem which should then reply with a UA or ADM, at which point
+ * we will move into open state. Opening is done asynchronously with retry
* running off timers and the responses.
*/
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rodrigo Vivi <[email protected]>
commit f24c606c21a8cb6f75adc20edcd80b6d851991bf upstream.
Let's ignore VBT request if the pin is clearly wrong.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104139
Cc: Kai Heng Feng <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Radhakrishna Sripada <[email protected]>
(cherry picked from commit a8e6f3888b05c1e7b685800a3371ce050720368f)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_bios.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -1115,9 +1115,14 @@ static const u8 cnp_ddc_pin_map[] = {
static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)
{
- if (HAS_PCH_CNP(dev_priv) &&
- vbt_pin > 0 && vbt_pin < ARRAY_SIZE(cnp_ddc_pin_map))
- return cnp_ddc_pin_map[vbt_pin];
+ if (HAS_PCH_CNP(dev_priv)) {
+ if (vbt_pin > 0 && vbt_pin < ARRAY_SIZE(cnp_ddc_pin_map))
+ return cnp_ddc_pin_map[vbt_pin];
+ if (vbt_pin > GMBUS_PIN_4_CNP) {
+ DRM_DEBUG_KMS("Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n", vbt_pin);
+ return 0;
+ }
+ }
return vbt_pin;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Lamparter <[email protected]>
[ Upstream commit 0b5a7f71b4c557b15ec54a1b49023bc1b21044cc ]
The ccm-aes-ppc4xx now fails one of testmgr's expected
failure test cases as such:
|decryption failed on test 10 for ccm-aes-ppc4xx:
|ret was 0, |expected -EBADMSG
It doesn't look like the hardware sets the authentication failure
flag. The original vendor source from which this was ported does
not have any special code or notes about why this would happen or
if there are any WAs.
Hence, this patch converts the aead_done callback handler to
perform the icv check in the driver. And this fixes the false
negative and the ccm-aes-ppc4xx passes the selftests once again.
|name : ccm(aes)
|driver : ccm-aes-ppc4xx
|module : crypto4xx
|priority : 300
|refcnt : 1
|selftest : passed
|internal : no
|type : aead
|async : yes
|blocksize : 1
|ivsize : 16
|maxauthsize : 16
|geniv : <none>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/amcc/crypto4xx_alg.c | 6 ---
drivers/crypto/amcc/crypto4xx_core.c | 54 +++++++++++++++++------------------
2 files changed, 28 insertions(+), 32 deletions(-)
--- a/drivers/crypto/amcc/crypto4xx_alg.c
+++ b/drivers/crypto/amcc/crypto4xx_alg.c
@@ -256,10 +256,6 @@ static inline bool crypto4xx_aead_need_f
if (is_ccm && !(req->iv[0] == 1 || req->iv[0] == 3))
return true;
- /* CCM - fix CBC MAC mismatch in special case */
- if (is_ccm && decrypt && !req->assoclen)
- return true;
-
return false;
}
@@ -330,7 +326,7 @@ int crypto4xx_setkey_aes_ccm(struct cryp
sa = (struct dynamic_sa_ctl *) ctx->sa_in;
sa->sa_contents.w = SA_AES_CCM_CONTENTS | (keylen << 2);
- set_dynamic_sa_command_0(sa, SA_NOT_SAVE_HASH, SA_NOT_SAVE_IV,
+ set_dynamic_sa_command_0(sa, SA_SAVE_HASH, SA_NOT_SAVE_IV,
SA_LOAD_HASH_FROM_SA, SA_LOAD_IV_FROM_STATE,
SA_NO_HEADER_PROC, SA_HASH_ALG_CBC_MAC,
SA_CIPHER_ALG_AES,
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -570,15 +570,14 @@ static void crypto4xx_aead_done(struct c
struct pd_uinfo *pd_uinfo,
struct ce_pd *pd)
{
- struct aead_request *aead_req;
- struct crypto4xx_ctx *ctx;
+ struct aead_request *aead_req = container_of(pd_uinfo->async_req,
+ struct aead_request, base);
struct scatterlist *dst = pd_uinfo->dest_va;
+ size_t cp_len = crypto_aead_authsize(
+ crypto_aead_reqtfm(aead_req));
+ u32 icv[cp_len];
int err = 0;
- aead_req = container_of(pd_uinfo->async_req, struct aead_request,
- base);
- ctx = crypto_tfm_ctx(aead_req->base.tfm);
-
if (pd_uinfo->using_sd) {
crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
pd->pd_ctl_len.bf.pkt_len,
@@ -590,38 +589,39 @@ static void crypto4xx_aead_done(struct c
if (pd_uinfo->sa_va->sa_command_0.bf.dir == DIR_OUTBOUND) {
/* append icv at the end */
- size_t cp_len = crypto_aead_authsize(
- crypto_aead_reqtfm(aead_req));
- u32 icv[cp_len];
-
crypto4xx_memcpy_from_le32(icv, pd_uinfo->sr_va->save_digest,
cp_len);
scatterwalk_map_and_copy(icv, dst, aead_req->cryptlen,
cp_len, 1);
+ } else {
+ /* check icv at the end */
+ scatterwalk_map_and_copy(icv, aead_req->src,
+ aead_req->assoclen + aead_req->cryptlen -
+ cp_len, cp_len, 0);
+
+ crypto4xx_memcpy_from_le32(icv, icv, cp_len);
+
+ if (crypto_memneq(icv, pd_uinfo->sr_va->save_digest, cp_len))
+ err = -EBADMSG;
}
crypto4xx_ret_sg_desc(dev, pd_uinfo);
if (pd->pd_ctl.bf.status & 0xff) {
- if (pd->pd_ctl.bf.status & 0x1) {
- /* authentication error */
- err = -EBADMSG;
- } else {
- if (!__ratelimit(&dev->aead_ratelimit)) {
- if (pd->pd_ctl.bf.status & 2)
- pr_err("pad fail error\n");
- if (pd->pd_ctl.bf.status & 4)
- pr_err("seqnum fail\n");
- if (pd->pd_ctl.bf.status & 8)
- pr_err("error _notify\n");
- pr_err("aead return err status = 0x%02x\n",
- pd->pd_ctl.bf.status & 0xff);
- pr_err("pd pad_ctl = 0x%08x\n",
- pd->pd_ctl.bf.pd_pad_ctl);
- }
- err = -EINVAL;
+ if (!__ratelimit(&dev->aead_ratelimit)) {
+ if (pd->pd_ctl.bf.status & 2)
+ pr_err("pad fail error\n");
+ if (pd->pd_ctl.bf.status & 4)
+ pr_err("seqnum fail\n");
+ if (pd->pd_ctl.bf.status & 8)
+ pr_err("error _notify\n");
+ pr_err("aead return err status = 0x%02x\n",
+ pd->pd_ctl.bf.status & 0xff);
+ pr_err("pd pad_ctl = 0x%08x\n",
+ pd->pd_ctl.bf.pd_pad_ctl);
}
+ err = -EINVAL;
}
if (pd_uinfo->state & PD_ENTRY_BUSY)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Khoroshilov <[email protected]>
[ Upstream commit 0be86969ae385c5c944286bd9f66068525de15ee ]
There are resources that are not dealocated on failure path
in int3400_thermal_probe().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/int340x_thermal/int3400_thermal.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -319,17 +319,21 @@ static int int3400_thermal_probe(struct
result = sysfs_create_group(&pdev->dev.kobj, &uuid_attribute_group);
if (result)
- goto free_zone;
+ goto free_rel_misc;
result = acpi_install_notify_handler(
priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify,
(void *)priv);
if (result)
- goto free_zone;
+ goto free_sysfs;
return 0;
-free_zone:
+free_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
+free_rel_misc:
+ if (!priv->rel_misc_dev_res)
+ acpi_thermal_rel_misc_device_remove(priv->adev->handle);
thermal_zone_device_unregister(priv->thermal);
free_art_trt:
kfree(priv->trts);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Gautham R. Shenoy" <[email protected]>
[ Upstream commit ee1f4a7dafa997816ff3de96155c6f3edc21c1e6 ]
On POWERNV platform, the fields for pstates in the Power Management
Status Register (PMSR) and the Power Management Control Register
(PMCR) are 8-bits wide. On POWER8 the pstates are negatively numbered
while on POWER9 they are positively numbered.
The device-tree exports pstates as 32-bit entries. The device-tree
implementation sign-extends the 8-bit pstate values to obtain the
corresponding 32-bit entry.
Eg: On POWER8, a pstate value 0x82 [-126] is represented in the
device-tree as 0xfffffff82 while on POWER9, the same value 0x82 [130]
is represented in the device-tree as 0x00000082.
The powernv-cpufreq driver implementation represents pstates using the
integer type. In multiple places in the driver, the code interprets
the pstates extracted from the PMSR as a signed byte and assigns it to
a integer variable to get the sign-extention.
On POWER9 platforms which have greater than 128 pstates, this results
in the driver performing incorrect sign-extention, and thereby
treating a legitimate pstate (say 130) as an invalid pstates (since it
is interpreted as -126).
This patch fixes the issue by implementing a helper function to
extract Pstates from PMSR register, and correctly sign-extend it to be
consistent with the values provided by the device-tree.
Signed-off-by: Gautham R. Shenoy <[email protected]>
Acked-by: Balbir Singh <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/powernv-cpufreq.c | 37 +++++++++++++++++++++++--------------
1 file changed, 23 insertions(+), 14 deletions(-)
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -41,11 +41,9 @@
#define POWERNV_MAX_PSTATES 256
#define PMSR_PSAFE_ENABLE (1UL << 30)
#define PMSR_SPR_EM_DISABLE (1UL << 31)
-#define PMSR_MAX(x) ((x >> 32) & 0xFF)
+#define MAX_PSTATE_SHIFT 32
#define LPSTATE_SHIFT 48
#define GPSTATE_SHIFT 56
-#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF)
-#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF)
#define MAX_RAMP_DOWN_TIME 5120
/*
@@ -94,6 +92,7 @@ struct global_pstate_info {
};
static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
+u32 pstate_sign_prefix;
static bool rebooting, throttled, occ_reset;
static const char * const throttle_reason[] = {
@@ -148,6 +147,20 @@ static struct powernv_pstate_info {
bool wof_enabled;
} powernv_pstate_info;
+static inline int extract_pstate(u64 pmsr_val, unsigned int shift)
+{
+ int ret = ((pmsr_val >> shift) & 0xFF);
+
+ if (!ret)
+ return ret;
+
+ return (pstate_sign_prefix | ret);
+}
+
+#define extract_local_pstate(x) extract_pstate(x, LPSTATE_SHIFT)
+#define extract_global_pstate(x) extract_pstate(x, GPSTATE_SHIFT)
+#define extract_max_pstate(x) extract_pstate(x, MAX_PSTATE_SHIFT)
+
/* Use following macros for conversions between pstate_id and index */
static inline int idx_to_pstate(unsigned int i)
{
@@ -278,6 +291,9 @@ next:
powernv_pstate_info.nr_pstates = nr_pstates;
pr_debug("NR PStates %d\n", nr_pstates);
+
+ pstate_sign_prefix = pstate_min & ~0xFF;
+
for (i = 0; i < nr_pstates; i++) {
u32 id = be32_to_cpu(pstate_ids[i]);
u32 freq = be32_to_cpu(pstate_freqs[i]);
@@ -438,17 +454,10 @@ struct powernv_smp_call_data {
static void powernv_read_cpu_freq(void *arg)
{
unsigned long pmspr_val;
- s8 local_pstate_id;
struct powernv_smp_call_data *freq_data = arg;
pmspr_val = get_pmspr(SPRN_PMSR);
-
- /*
- * The local pstate id corresponds bits 48..55 in the PMSR.
- * Note: Watch out for the sign!
- */
- local_pstate_id = (pmspr_val >> 48) & 0xFF;
- freq_data->pstate_id = local_pstate_id;
+ freq_data->pstate_id = extract_local_pstate(pmspr_val);
freq_data->freq = pstate_id_to_freq(freq_data->pstate_id);
pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n",
@@ -522,7 +531,7 @@ static void powernv_cpufreq_throttle_che
chip = this_cpu_read(chip_info);
/* Check for Pmax Capping */
- pmsr_pmax = (s8)PMSR_MAX(pmsr);
+ pmsr_pmax = extract_max_pstate(pmsr);
pmsr_pmax_idx = pstate_to_idx(pmsr_pmax);
if (pmsr_pmax_idx != powernv_pstate_info.max) {
if (chip->throttled)
@@ -645,8 +654,8 @@ void gpstate_timer_handler(struct timer_
* value. Hence, read from PMCR to get correct data.
*/
val = get_pmspr(SPRN_PMCR);
- freq_data.gpstate_id = (s8)GET_GPSTATE(val);
- freq_data.pstate_id = (s8)GET_LPSTATE(val);
+ freq_data.gpstate_id = extract_global_pstate(val);
+ freq_data.pstate_id = extract_local_pstate(val);
if (freq_data.gpstate_id == freq_data.pstate_id) {
reset_gpstates(policy);
spin_unlock(&gpstates->gpstate_lock);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit 9291c65b01d1c67ebd56644cb19317ad665c44b3 ]
On some systems, some PCB traces attached to GpioInts are routed in such
a way that they pick up enough interference to constantly (many times per
second) trigger.
Enabling glitch-filtering fixes this.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -46,6 +46,9 @@
#define BYT_TRIG_POS BIT(25)
#define BYT_TRIG_LVL BIT(24)
#define BYT_DEBOUNCE_EN BIT(20)
+#define BYT_GLITCH_FILTER_EN BIT(19)
+#define BYT_GLITCH_F_SLOW_CLK BIT(17)
+#define BYT_GLITCH_F_FAST_CLK BIT(16)
#define BYT_PULL_STR_SHIFT 9
#define BYT_PULL_STR_MASK (3 << BYT_PULL_STR_SHIFT)
#define BYT_PULL_STR_2K (0 << BYT_PULL_STR_SHIFT)
@@ -1579,6 +1582,9 @@ static int byt_irq_type(struct irq_data
*/
value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
BYT_TRIG_LVL);
+ /* Enable glitch filtering */
+ value |= BYT_GLITCH_FILTER_EN | BYT_GLITCH_F_SLOW_CLK |
+ BYT_GLITCH_F_FAST_CLK;
writel(value, reg);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulf Hansson <[email protected]>
[ Upstream commit a935424bb658f9ca37eb5e94119b857998341356 ]
Commit 10da65423fdb (PM / Domains: Call driver's noirq callbacks)
started to respect driver's noirq callbacks, but while doing that it
also introduced a few potential problems.
More precisely, in genpd_finish_suspend() and genpd_resume_noirq()
the noirq callbacks at the driver level should be invoked, no matter
of whether dev->power.wakeup_path is set or not.
Additionally, the commit in question also made genpd_resume_noirq()
to ignore the return value from pm_runtime_force_resume().
Let's fix both these issues!
Fixes: 10da65423fdb (PM / Domains: Call driver's noirq callbacks)
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/domain.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1032,15 +1032,12 @@ static int genpd_prepare(struct device *
static int genpd_finish_suspend(struct device *dev, bool poweroff)
{
struct generic_pm_domain *genpd;
- int ret;
+ int ret = 0;
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
- if (dev->power.wakeup_path && genpd_is_active_wakeup(genpd))
- return 0;
-
if (poweroff)
ret = pm_generic_poweroff_noirq(dev);
else
@@ -1048,10 +1045,18 @@ static int genpd_finish_suspend(struct d
if (ret)
return ret;
+ if (dev->power.wakeup_path && genpd_is_active_wakeup(genpd))
+ return 0;
+
if (genpd->dev_ops.stop && genpd->dev_ops.start) {
ret = pm_runtime_force_suspend(dev);
- if (ret)
+ if (ret) {
+ if (poweroff)
+ pm_generic_restore_noirq(dev);
+ else
+ pm_generic_resume_noirq(dev);
return ret;
+ }
}
genpd_lock(genpd);
@@ -1085,7 +1090,7 @@ static int genpd_suspend_noirq(struct de
static int genpd_resume_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
- int ret = 0;
+ int ret;
dev_dbg(dev, "%s()\n", __func__);
@@ -1094,21 +1099,20 @@ static int genpd_resume_noirq(struct dev
return -EINVAL;
if (dev->power.wakeup_path && genpd_is_active_wakeup(genpd))
- return 0;
+ return pm_generic_resume_noirq(dev);
genpd_lock(genpd);
genpd_sync_power_on(genpd, true, 0);
genpd->suspended_count--;
genpd_unlock(genpd);
- if (genpd->dev_ops.stop && genpd->dev_ops.start)
+ if (genpd->dev_ops.stop && genpd->dev_ops.start) {
ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+ }
- ret = pm_generic_resume_noirq(dev);
- if (ret)
- return ret;
-
- return ret;
+ return pm_generic_resume_noirq(dev);
}
/**
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit d65026c6c62e7d9616c8ceb5a53b68bcdc050525 ]
Vq log_base is the userspace address of bitmap which has nothing to do
with IOTLB. So it needs to be validated unconditionally otherwise we
may try use 0 as log_base which may lead to pin pages that will lead
unexpected result (e.g trigger BUG_ON() in set_bit_to_user()).
Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API")
Reported-by: [email protected]
Signed-off-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/vhost.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1256,14 +1256,12 @@ static int vq_log_access_ok(struct vhost
/* Caller should have vq mutex and device mutex */
int vhost_vq_access_ok(struct vhost_virtqueue *vq)
{
- if (vq->iotlb) {
- /* When device IOTLB was used, the access validation
- * will be validated during prefetching.
- */
- return 1;
- }
- return vq_access_ok(vq, vq->num, vq->desc, vq->avail, vq->used) &&
- vq_log_access_ok(vq, vq->log_base);
+ int ret = vq_log_access_ok(vq, vq->log_base);
+
+ if (ret || vq->iotlb)
+ return ret;
+
+ return vq_access_ok(vq, vq->num, vq->desc, vq->avail, vq->used);
}
EXPORT_SYMBOL_GPL(vhost_vq_access_ok);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
[ Upstream commit 8ab0b7dc73e1b3e2987d42554b2bff503f692772 ]
HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(),
then we need to check it before calling blk_mq_tag_idle(), otherwise
the following kernel oops can be triggered, so fix it by checking if
the hw queue is unmapped since it doesn't make sense to idle the tags
any more after hw queues are unmapped.
[ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma]
[ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000
[ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286
[ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f
[ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00
[ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000
[ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008
[ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080
[ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000
[ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0
[ 440.876169] Call Trace:
[ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0
[ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160
[ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150
[ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core]
[ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core]
[ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma]
[ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma]
[ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440
[ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0
[ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0
[ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0
[ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90
[ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f
[ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[ 441.019301] RSP <ffff893bf9bcbd10>
[ 441.024052] CR2: 0000000000000008
Reported-by: Zhang Yi <[email protected]>
Tested-by: Zhang Yi <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-mq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1996,7 +1996,8 @@ static void blk_mq_exit_hctx(struct requ
{
blk_mq_debugfs_unregister_hctx(hctx);
- blk_mq_tag_idle(hctx);
+ if (blk_mq_hw_queue_mapped(hctx))
+ blk_mq_tag_idle(hctx);
if (set->ops->exit_request)
set->ops->exit_request(set, hctx->fq->flush_rq, hctx_idx);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit abdadd3cfd3e7ea3da61ac774f84777d1f702058 ]
when the following command
# tc action add action tunnel_key unset index 100
is run for the first time, and tunnel_key_init() fails to allocate struct
tcf_tunnel_key_params, tunnel_key_release() dereferences NULL pointers.
This causes the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: tunnel_key_release+0xd/0x40 [act_tunnel_key]
PGD 8000000033787067 P4D 8000000033787067 PUD 74646067 PMD 0
Oops: 0000 [#1] SMP PTI
Modules linked in: act_tunnel_key(E) act_csum ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel pcbc snd_hda_codec snd_hda_core snd_hwdep snd_seq aesni_intel snd_seq_device crypto_simd glue_helper snd_pcm cryptd joydev snd_timer pcspkr virtio_balloon snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk drm virtio_console crc32c_intel ata_piix serio_raw i2c_core virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 3101 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tunnel_key_release+0xd/0x40 [act_tunnel_key]
RSP: 0018:ffffba46803b7768 EFLAGS: 00010286
RAX: ffffffffc09010a0 RBX: 0000000000000000 RCX: 0000000000000024
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99ee336d7480
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff99ee79d73131 R12: 0000000000000000
R13: ffff99ee32d67610 R14: ffff99ee7671dc38 R15: 00000000fffffff4
FS: 00007febcb2cd740(0000) GS:ffff99ee7fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000007c8e4005 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tunnel_key_init+0xd9/0x460 [act_tunnel_key]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7febca6deba0
RSP: 002b:00007ffe7b0dd128 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffe7b0dd250 RCX: 00007febca6deba0
RDX: 0000000000000000 RSI: 00007ffe7b0dd1a0 RDI: 0000000000000003
RBP: 000000005aaa90cb R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffe7b0dcba0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe7b0dd264 R14: 0000000000000001 R15: 0000000000669f60
Code: 44 00 00 8b 0d b5 23 00 00 48 8b 87 48 10 00 00 48 8b 3c c8 e9 a5 e5 d8 c3 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 9f b0 00 00 00 <83> 7b 10 01 74 0b 48 89 df 31 f6 5b e9 f2 fa 7f c3 48 8b 7b 18
RIP: tunnel_key_release+0xd/0x40 [act_tunnel_key] RSP: ffffba46803b7768
CR2: 0000000000000010
Fix this in tunnel_key_release(), ensuring 'param' is not NULL before
dereferencing it.
Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_tunnel_key.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/net/sched/act_tunnel_key.c
+++ b/net/sched/act_tunnel_key.c
@@ -208,11 +208,12 @@ static void tunnel_key_release(struct tc
struct tcf_tunnel_key_params *params;
params = rcu_dereference_protected(t->params, 1);
+ if (params) {
+ if (params->tcft_action == TCA_TUNNEL_KEY_ACT_SET)
+ dst_release(¶ms->tcft_enc_metadata->dst);
- if (params->tcft_action == TCA_TUNNEL_KEY_ACT_SET)
- dst_release(¶ms->tcft_enc_metadata->dst);
-
- kfree_rcu(params, rcu);
+ kfree_rcu(params, rcu);
+ }
}
static int tunnel_key_dump_addresses(struct sk_buff *skb,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit 19c9ea363a244f85f90a424f9936e6d56449e33c ]
pci_set_drvdata() is called only after registering the net_device,
therefore we could run into a NPE if one of the functions using
driver_data is called before it's set.
Fix this by calling pci_set_drvdata() before registering the
net_device.
This fix is a candidate for stable. As far as I can see the
bug has been there in kernel version 3.2 already, therefore
I can't provide a reference which commit is fixed by it.
The fix may need small adjustments per kernel version because
due to other changes the label which is jumped to if
register_netdev() fails has changed over time.
Reported-by: David Miller <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -8699,12 +8699,12 @@ static int rtl_init_one(struct pci_dev *
goto err_out_msi_5;
}
+ pci_set_drvdata(pdev, dev);
+
rc = register_netdev(dev);
if (rc < 0)
goto err_out_cnt_6;
- pci_set_drvdata(pdev, dev);
-
netif_info(tp, probe, dev, "%s at 0x%p, %pM, XID %08x IRQ %d\n",
rtl_chip_infos[chipset].name, ioaddr, dev->dev_addr,
(u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), pdev->irq);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roi Dayan <[email protected]>
[ Upstream commit 4246f698dd58e3c6246fa919ef0b0a1d29a57e4a ]
Increase representor netdev RQ size to avoid dropped packets.
The current size (two) is just too small to keep up with
conventional slow path traffic patterns.
Also match the SQ size to the RQ size.
Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Paul Blakey <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -44,6 +44,11 @@
#include "en_tc.h"
#include "fs_core.h"
+#define MLX5E_REP_PARAMS_LOG_SQ_SIZE \
+ max(0x6, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)
+#define MLX5E_REP_PARAMS_LOG_RQ_SIZE \
+ max(0x6, MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE)
+
static const char mlx5e_rep_driver_name[] = "mlx5e_rep";
static void mlx5e_rep_get_drvinfo(struct net_device *dev,
@@ -824,9 +829,9 @@ static void mlx5e_build_rep_params(struc
MLX5_CQ_PERIOD_MODE_START_FROM_CQE :
MLX5_CQ_PERIOD_MODE_START_FROM_EQE;
- params->log_sq_size = MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE;
+ params->log_sq_size = MLX5E_REP_PARAMS_LOG_SQ_SIZE;
params->rq_wq_type = MLX5_WQ_TYPE_LINKED_LIST;
- params->log_rq_size = MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE;
+ params->log_rq_size = MLX5E_REP_PARAMS_LOG_RQ_SIZE;
params->rx_am_enabled = MLX5_CAP_GEN(mdev, cq_moderation);
mlx5e_set_rx_cq_mode_params(params, cq_period_mode);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Watson <[email protected]>
[ Upstream commit cd00edc179863848abab5cc5683de5b7b5f70954 ]
strp_parser_err is called with a negative code everywhere, which then
calls abort_parser with a negative code. strp_msg_timeout calls
abort_parser directly with a positive code. Negate ETIMEDOUT
to match signed-ness of other calls.
The default abort_parser callback, strp_abort_strp, sets
sk->sk_err to err. Also negate the error here so sk_err always
holds a positive value, as the rest of the net code expects. Currently
a negative sk_err can result in endless loops, or user code that
thinks it actually sent/received err bytes.
Found while testing net/tls_sw recv path.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages")
Signed-off-by: Dave Watson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/strparser/strparser.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/strparser/strparser.c
+++ b/net/strparser/strparser.c
@@ -60,7 +60,7 @@ static void strp_abort_strp(struct strpa
struct sock *sk = strp->sk;
/* Report an error on the lower socket */
- sk->sk_err = err;
+ sk->sk_err = -err;
sk->sk_error_report(sk);
}
}
@@ -458,7 +458,7 @@ static void strp_msg_timeout(struct work
/* Message assembly timed out */
STRP_STATS_INCR(strp->stats.msg_timeouts);
strp->cb.lock(strp);
- strp->cb.abort_parser(strp, ETIMEDOUT);
+ strp->cb.abort_parser(strp, -ETIMEDOUT);
strp->cb.unlock(strp);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit 2d433610176d6569e8b3a28f67bc72235bf69efc ]
when the following command
# tc action replace action skbmod swap mac index 100
is run for the first time, and tcf_skbmod_init() fails to allocate struct
tcf_skbmod_params, tcf_skbmod_cleanup() calls kfree_rcu(NULL), thus
causing the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: __call_rcu+0x23/0x2b0
PGD 8000000034057067 P4D 8000000034057067 PUD 74937067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_skbmod(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache jbd2 crc32_pclmul snd_hda_core ghash_clmulni_intel snd_hwdep pcbc snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd glue_helper snd cryptd virtio_balloon joydev soundcore pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_net virtio_blk ata_piix libata crc32c_intel virtio_pci serio_raw virtio_ring virtio i2c_core floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_skbmod]
CPU: 3 PID: 3144 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffbd2e403e7798 EFLAGS: 00010246
RAX: ffffffffc0872080 RBX: ffff981d34bff780 RCX: 00000000ffffffff
RDX: ffffffff922a5f00 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000021f
R10: 000000003d003000 R11: 0000000000aaaaaa R12: 0000000000000000
R13: ffffffff922a5f00 R14: 0000000000000001 R15: ffff981d3b698c2c
FS: 00007f3678292740(0000) GS:ffff981d3fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000007c57a006 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_skbmod_init+0x1d1/0x210 [act_skbmod]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f36776a3ba0
RSP: 002b:00007fff4703b618 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff4703b740 RCX: 00007f36776a3ba0
RDX: 0000000000000000 RSI: 00007fff4703b690 RDI: 0000000000000003
RBP: 000000005aaaba36 R08: 0000000000000002 R09: 0000000000000000
R10: 00007fff4703b0a0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff4703b754 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffbd2e403e7798
CR2: 0000000000000008
Fix it in tcf_skbmod_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.
Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Signed-off-by: Davide Caratti <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_skbmod.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/sched/act_skbmod.c
+++ b/net/sched/act_skbmod.c
@@ -190,7 +190,8 @@ static void tcf_skbmod_cleanup(struct tc
struct tcf_skbmod_params *p;
p = rcu_dereference_protected(d->skbmod_p, 1);
- kfree_rcu(p, rcu);
+ if (p)
+ kfree_rcu(p, rcu);
}
static int tcf_skbmod_dump(struct sk_buff *skb, struct tc_action *a,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jianbo Liu <[email protected]>
The vport admin original link state will be re-applied after returning
back to legacy mode, it is not right to change the admin link state value
when in switchdev mode.
Use direct vport commands to alter logical vport state in netdev
representor open/close flows rather than the administrative eswitch API.
Fixes: 20a1ea674783 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode')
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -611,7 +611,6 @@ static int mlx5e_rep_open(struct net_dev
struct mlx5e_priv *priv = netdev_priv(dev);
struct mlx5e_rep_priv *rpriv = priv->ppriv;
struct mlx5_eswitch_rep *rep = rpriv->rep;
- struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
int err;
mutex_lock(&priv->state_lock);
@@ -619,8 +618,9 @@ static int mlx5e_rep_open(struct net_dev
if (err)
goto unlock;
- if (!mlx5_eswitch_set_vport_state(esw, rep->vport,
- MLX5_ESW_VPORT_ADMIN_STATE_UP))
+ if (!mlx5_modify_vport_admin_state(priv->mdev,
+ MLX5_QUERY_VPORT_STATE_IN_OP_MOD_ESW_VPORT,
+ rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_UP))
netif_carrier_on(dev);
unlock:
@@ -633,11 +633,12 @@ static int mlx5e_rep_close(struct net_de
struct mlx5e_priv *priv = netdev_priv(dev);
struct mlx5e_rep_priv *rpriv = priv->ppriv;
struct mlx5_eswitch_rep *rep = rpriv->rep;
- struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
int ret;
mutex_lock(&priv->state_lock);
- (void)mlx5_eswitch_set_vport_state(esw, rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN);
+ mlx5_modify_vport_admin_state(priv->mdev,
+ MLX5_QUERY_VPORT_STATE_IN_OP_MOD_ESW_VPORT,
+ rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN);
ret = mlx5e_close_locked(dev);
mutex_unlock(&priv->state_lock);
return ret;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Lebrun <[email protected]>
[ Upstream commit 5807b22c9164a21cd1077a9bc587f0bba361f72d ]
Enabling TSO can lead to abysmal performances when using seg6 in
encap mode, such as with the ixgbe driver. This patch adds a call to
iptunnel_handle_offloads() to remove the encapsulation bit if needed.
Before:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 36592 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 196 KBytes 1.60 Mbits/sec 47 6.66 KBytes
[ 4] 1.00-2.00 sec 304 KBytes 2.49 Mbits/sec 100 5.33 KBytes
[ 4] 2.00-3.00 sec 284 KBytes 2.32 Mbits/sec 92 5.33 KBytes
After:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 43062 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.03 GBytes 8.89 Gbits/sec 0 743 KBytes
[ 4] 1.00-2.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
[ 4] 2.00-3.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
Reported-by: Tom Herbert <[email protected]>
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/seg6_iptunnel.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -16,6 +16,7 @@
#include <linux/net.h>
#include <linux/module.h>
#include <net/ip.h>
+#include <net/ip_tunnels.h>
#include <net/lwtunnel.h>
#include <net/netevent.h>
#include <net/netns/generic.h>
@@ -211,11 +212,6 @@ static int seg6_do_srh(struct sk_buff *s
tinfo = seg6_encap_lwtunnel(dst->lwtstate);
- if (likely(!skb->encapsulation)) {
- skb_reset_inner_headers(skb);
- skb->encapsulation = 1;
- }
-
switch (tinfo->mode) {
case SEG6_IPTUN_MODE_INLINE:
if (skb->protocol != htons(ETH_P_IPV6))
@@ -224,10 +220,12 @@ static int seg6_do_srh(struct sk_buff *s
err = seg6_do_srh_inline(skb, tinfo->srh);
if (err)
return err;
-
- skb_reset_inner_headers(skb);
break;
case SEG6_IPTUN_MODE_ENCAP:
+ err = iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6);
+ if (err)
+ return err;
+
if (skb->protocol == htons(ETH_P_IPV6))
proto = IPPROTO_IPV6;
else if (skb->protocol == htons(ETH_P_IP))
@@ -239,6 +237,8 @@ static int seg6_do_srh(struct sk_buff *s
if (err)
return err;
+ skb_set_inner_transport_header(skb, skb_transport_offset(skb));
+ skb_set_inner_protocol(skb, skb->protocol);
skb->protocol = htons(ETH_P_IPV6);
break;
case SEG6_IPTUN_MODE_L2ENCAP:
@@ -262,8 +262,6 @@ static int seg6_do_srh(struct sk_buff *s
ipv6_hdr(skb)->payload_len = htons(skb->len - sizeof(struct ipv6hdr));
skb_set_transport_header(skb, sizeof(struct ipv6hdr));
- skb_set_inner_protocol(skb, skb->protocol);
-
return 0;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Moshe Shemesh <[email protected]>
[ Upstream commit 461d5f1b59490ce0096dfda45e10038c122a7892 ]
mlx4_delete_all_resources_for_slave in resource tracker should free all
memory allocated for a slave.
While releasing memory of fs_rule, it misses releasing memory of
fs_rule->mirr_mbox.
Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports')
Signed-off-by: Moshe Shemesh <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -5088,6 +5088,7 @@ static void rem_slave_fs_rule(struct mlx
&tracker->res_tree[RES_FS_RULE]);
list_del(&fs_rule->com.list);
spin_unlock_irq(mlx4_tlock(dev));
+ kfree(fs_rule->mirr_mbox);
kfree(fs_rule);
state = 0;
break;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 982cf3b3999d39a2eaca0a65542df33c19b5d814 ]
The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link
in bond_enslave' is needed for team driver.
The panic can be reproduced easily:
ip link add team1 type team
ip link set team1 up
ip link add link team1 vlan1 type vlan id 80
ip link set vlan1 master team1
Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/team/team.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1197,11 +1197,6 @@ static int team_port_add(struct team *te
goto err_dev_open;
}
- netif_addr_lock_bh(dev);
- dev_uc_sync_multiple(port_dev, dev);
- dev_mc_sync_multiple(port_dev, dev);
- netif_addr_unlock_bh(dev);
-
err = vlan_vids_add_by_dev(port_dev, dev);
if (err) {
netdev_err(dev, "Failed to add vlan ids to device %s\n",
@@ -1241,6 +1236,11 @@ static int team_port_add(struct team *te
goto err_option_port_add;
}
+ netif_addr_lock_bh(dev);
+ dev_uc_sync_multiple(port_dev, dev);
+ dev_mc_sync_multiple(port_dev, dev);
+ netif_addr_unlock_bh(dev);
+
port->index = -1;
list_add_tail_rcu(&port->list, &team->port_list);
team_port_enable(team, port);
@@ -1265,8 +1265,6 @@ err_enable_netpoll:
vlan_vids_del_by_dev(port_dev, dev);
err_vids_add:
- dev_uc_unsync(port_dev, dev);
- dev_mc_unsync(port_dev, dev);
dev_close(port_dev);
err_dev_open:
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit aaa3149bbee9ba9b4e6f0bd6e3e7d191edeae942 ]
We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len()
after RX virtqueue mutex is held in handle_rx(). This requires an
appropriate lock nesting notation to calm down deadlock detector.
Fixes: 0308813724606 ("vhost_net: basic polling support")
Reported-by: [email protected]
Signed-off-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/net.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -618,7 +618,7 @@ static int vhost_net_rx_peek_head_len(st
if (!len && vq->busyloop_timeout) {
/* Both tx vq and rx socket were polled here */
- mutex_lock(&vq->mutex);
+ mutex_lock_nested(&vq->mutex, 1);
vhost_disable_notify(&net->dev, vq);
preempt_disable();
@@ -751,7 +751,7 @@ static void handle_rx(struct vhost_net *
struct iov_iter fixup;
__virtio16 num_buffers;
- mutex_lock(&vq->mutex);
+ mutex_lock_nested(&vq->mutex, 0);
sock = vq->private_data;
if (!sock)
goto out;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 6174a30df1b902e1fedbd728f5343937e83e64e6 ]
Prior to this patch, when one packet is hashed into path [1]
(hash <= nh_upper_bound) and it's neigh is dead, it will try
path [2]. However, if path [2]'s neigh is alive but it's
hash > nh_upper_bound, it will not return this alive path.
This packet will never be sent even if path [2] is alive.
3.3.3.1/24:
nexthop via 1.1.1.254 dev eth1 weight 1 <--[1] (dead neigh)
nexthop via 2.2.2.254 dev eth2 weight 1 <--[2]
With sysctl_fib_multipath_use_neigh set is supposed to find an
available path respecting to the l3/l4 hash. But if there is
no available route with this hash, it should at least return
an alive route even with other hash.
This patch is to fix it by processing fib_multipath_use_neigh
earlier than the hash check, so that it will at least return
an alive route if there is when fib_multipath_use_neigh is
enabled. It's also compatible with before when there are alive
routes with the l3/l4 hash.
Fixes: a6db4494d218 ("net: ipv4: Consider failed nexthops in multipath routes")
Reported-by: Jianlin Shi <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1746,18 +1746,20 @@ void fib_select_multipath(struct fib_res
bool first = false;
for_nexthops(fi) {
+ if (net->ipv4.sysctl_fib_multipath_use_neigh) {
+ if (!fib_good_nh(nh))
+ continue;
+ if (!first) {
+ res->nh_sel = nhsel;
+ first = true;
+ }
+ }
+
if (hash > atomic_read(&nh->nh_upper_bound))
continue;
- if (!net->ipv4.sysctl_fib_multipath_use_neigh ||
- fib_good_nh(nh)) {
- res->nh_sel = nhsel;
- return;
- }
- if (!first) {
- res->nh_sel = nhsel;
- first = true;
- }
+ res->nh_sel = nhsel;
+ return;
} endfor_nexthops(fi);
}
#endif
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shahar Klein <[email protected]>
[ Upstream commit a117f73dc2430443f23e18367fa545981129c1a6 ]
When mlx5_core is loaded it is expected to sync ports
with all vxlan devices so it can support vxlan encap/decap.
This is done via udp_tunnel_get_rx_info(). Currently this
call is set in mlx5e_nic_enable() and if the netdev is not in
NETREG_REGISTERED state it will not be called.
Normally on load the netdev state is not NETREG_REGISTERED
so udp_tunnel_get_rx_info() will not be called.
Moving udp_tunnel_get_rx_info() to mlx5e_open() so
it will be called on netdev UP event and allow encap/decap.
Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered")
Signed-off-by: Shahar Klein <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2715,6 +2715,9 @@ int mlx5e_open(struct net_device *netdev
mlx5_set_port_admin_status(priv->mdev, MLX5_PORT_UP);
mutex_unlock(&priv->state_lock);
+ if (mlx5e_vxlan_allowed(priv->mdev))
+ udp_tunnel_get_rx_info(netdev);
+
return err;
}
@@ -4428,12 +4431,6 @@ static void mlx5e_nic_enable(struct mlx5
#ifdef CONFIG_MLX5_CORE_EN_DCB
mlx5e_dcbnl_init_app(priv);
#endif
- /* Device already registered: sync netdev system state */
- if (mlx5e_vxlan_allowed(mdev)) {
- rtnl_lock();
- udp_tunnel_get_rx_info(netdev);
- rtnl_unlock();
- }
queue_work(priv->wq, &priv->set_rx_mode_work);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dirk van der Merwe <[email protected]>
[ Upstream commit 1489bbd10e16079ce30a53d3c22a431fd47af791 ]
The NSP default buffer is a piece of NFP memory where additional
command data can be placed. Its format has been copied from
host buffer, but the PCIe selection bits do not make sense in
this case. If those get masked out from a NFP address - writes
to random place in the chip memory may be issued and crash the
device.
Even in the general NSP buffer case, it doesn't make sense to have the
PCIe selection bits there anymore. These are unused at the moment, and
when it becomes necessary, the PCIe selection bits should rather be
moved to another register to utilise more bits for the buffer address.
This has never been an issue because the buffer used to be
allocated in memory with less-than-38-bit-long address but that
is about to change.
Fixes: 1a64821c6af7 ("nfp: add support for service processor access")
Signed-off-by: Dirk van der Merwe <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp.c
@@ -68,10 +68,11 @@
/* CPP address to retrieve the data from */
#define NSP_BUFFER 0x10
#define NSP_BUFFER_CPP GENMASK_ULL(63, 40)
-#define NSP_BUFFER_PCIE GENMASK_ULL(39, 38)
-#define NSP_BUFFER_ADDRESS GENMASK_ULL(37, 0)
+#define NSP_BUFFER_ADDRESS GENMASK_ULL(39, 0)
#define NSP_DFLT_BUFFER 0x18
+#define NSP_DFLT_BUFFER_CPP GENMASK_ULL(63, 40)
+#define NSP_DFLT_BUFFER_ADDRESS GENMASK_ULL(39, 0)
#define NSP_DFLT_BUFFER_CONFIG 0x20
#define NSP_DFLT_BUFFER_SIZE_MB GENMASK_ULL(7, 0)
@@ -412,8 +413,8 @@ static int nfp_nsp_command_buf(struct nf
if (err < 0)
return err;
- cpp_id = FIELD_GET(NSP_BUFFER_CPP, reg) << 8;
- cpp_buf = FIELD_GET(NSP_BUFFER_ADDRESS, reg);
+ cpp_id = FIELD_GET(NSP_DFLT_BUFFER_CPP, reg) << 8;
+ cpp_buf = FIELD_GET(NSP_DFLT_BUFFER_ADDRESS, reg);
if (in_buf && in_size) {
err = nfp_cpp_write(cpp, cpp_id, cpp_buf, in_buf, in_size);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 9f5a90c107741b864398f4ac0014711a8c1d8474 ]
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails,
dev_set_promiscuity(-1) should be done before going to the err path.
Otherwise, dev->promiscuity will leak.
Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Andy Gospodarek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1706,8 +1706,11 @@ int bond_enslave(struct net_device *bond
/* set allmulti level to new slave */
if (bond_dev->flags & IFF_ALLMULTI) {
res = dev_set_allmulti(slave_dev, 1);
- if (res)
+ if (res) {
+ if (bond_dev->flags & IFF_PROMISC)
+ dev_set_promiscuity(slave_dev, -1);
goto err_sysfs_del;
+ }
}
netif_addr_lock_bh(bond_dev);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit ae42cc62a9f07f1f6979054ed92606b9c30f4a2e ]
Beniamino found a crash when adding vlan as slave of bond which is also
the parent link:
ip link add bond1 type bond
ip link set bond1 up
ip link add link bond1 vlan1 type vlan id 80
ip link set vlan1 master bond1
The call trace is as below:
[<ffffffffa850842a>] queued_spin_lock_slowpath+0xb/0xf
[<ffffffffa8515680>] _raw_spin_lock+0x20/0x30
[<ffffffffa83f6f07>] dev_mc_sync+0x37/0x80
[<ffffffffc08687dc>] vlan_dev_set_rx_mode+0x1c/0x30 [8021q]
[<ffffffffa83efd2a>] __dev_set_rx_mode+0x5a/0xa0
[<ffffffffa83f7138>] dev_mc_sync_multiple+0x78/0x80
[<ffffffffc084127c>] bond_enslave+0x67c/0x1190 [bonding]
[<ffffffffa8401909>] do_setlink+0x9c9/0xe50
[<ffffffffa8403bf2>] rtnl_newlink+0x522/0x880
[<ffffffffa8403ff7>] rtnetlink_rcv_msg+0xa7/0x260
[<ffffffffa8424ecb>] netlink_rcv_skb+0xab/0xc0
[<ffffffffa83fe498>] rtnetlink_rcv+0x28/0x30
[<ffffffffa8424850>] netlink_unicast+0x170/0x210
[<ffffffffa8424bf8>] netlink_sendmsg+0x308/0x420
[<ffffffffa83cc396>] sock_sendmsg+0xb6/0xf0
This is actually a dead lock caused by sync slave hwaddr from master when
the master is the slave's 'slave'. This dead loop check is actually done
by netdev_master_upper_dev_link. However, Commit 1f718f0f4f97 ("bonding:
populate neighbour's private on enslave") moved it after dev_mc_sync.
This patch is to fix it by moving dev_mc_sync after master_upper_dev_link,
so that this loop check would be earlier than dev_mc_sync. It also moves
if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an
improvement.
Note team driver also has this issue, I will fix it in another patch.
Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave")
Reported-by: Beniamino Galvani <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Andy Gospodarek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 73 +++++++++++++++++++---------------------
1 file changed, 35 insertions(+), 38 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1528,44 +1528,11 @@ int bond_enslave(struct net_device *bond
goto err_close;
}
- /* If the mode uses primary, then the following is handled by
- * bond_change_active_slave().
- */
- if (!bond_uses_primary(bond)) {
- /* set promiscuity level to new slave */
- if (bond_dev->flags & IFF_PROMISC) {
- res = dev_set_promiscuity(slave_dev, 1);
- if (res)
- goto err_close;
- }
-
- /* set allmulti level to new slave */
- if (bond_dev->flags & IFF_ALLMULTI) {
- res = dev_set_allmulti(slave_dev, 1);
- if (res)
- goto err_close;
- }
-
- netif_addr_lock_bh(bond_dev);
-
- dev_mc_sync_multiple(slave_dev, bond_dev);
- dev_uc_sync_multiple(slave_dev, bond_dev);
-
- netif_addr_unlock_bh(bond_dev);
- }
-
- if (BOND_MODE(bond) == BOND_MODE_8023AD) {
- /* add lacpdu mc addr to mc list */
- u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
-
- dev_mc_add(slave_dev, lacpdu_multicast);
- }
-
res = vlan_vids_add_by_dev(slave_dev, bond_dev);
if (res) {
netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n",
slave_dev->name);
- goto err_hwaddr_unsync;
+ goto err_close;
}
prev_slave = bond_last_slave(bond);
@@ -1725,6 +1692,37 @@ int bond_enslave(struct net_device *bond
goto err_upper_unlink;
}
+ /* If the mode uses primary, then the following is handled by
+ * bond_change_active_slave().
+ */
+ if (!bond_uses_primary(bond)) {
+ /* set promiscuity level to new slave */
+ if (bond_dev->flags & IFF_PROMISC) {
+ res = dev_set_promiscuity(slave_dev, 1);
+ if (res)
+ goto err_sysfs_del;
+ }
+
+ /* set allmulti level to new slave */
+ if (bond_dev->flags & IFF_ALLMULTI) {
+ res = dev_set_allmulti(slave_dev, 1);
+ if (res)
+ goto err_sysfs_del;
+ }
+
+ netif_addr_lock_bh(bond_dev);
+ dev_mc_sync_multiple(slave_dev, bond_dev);
+ dev_uc_sync_multiple(slave_dev, bond_dev);
+ netif_addr_unlock_bh(bond_dev);
+
+ if (BOND_MODE(bond) == BOND_MODE_8023AD) {
+ /* add lacpdu mc addr to mc list */
+ u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
+
+ dev_mc_add(slave_dev, lacpdu_multicast);
+ }
+ }
+
bond->slave_cnt++;
bond_compute_features(bond);
bond_set_carrier(bond);
@@ -1748,6 +1746,9 @@ int bond_enslave(struct net_device *bond
return 0;
/* Undo stages on error */
+err_sysfs_del:
+ bond_sysfs_slave_del(new_slave);
+
err_upper_unlink:
bond_upper_dev_unlink(bond, new_slave);
@@ -1768,10 +1769,6 @@ err_detach:
synchronize_rcu();
slave_disable_netpoll(new_slave);
-err_hwaddr_unsync:
- if (!bond_uses_primary(bond))
- bond_hw_addr_flush(bond_dev, slave_dev);
-
err_close:
slave_dev->priv_flags &= ~IFF_BONDING;
dev_close(slave_dev);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eran Ben Elisha <[email protected]>
[ Upstream commit 6e8814ceb7e8f468659ef9253bd212c07ae19584 ]
Global pause and PFC configuration should be mutually exclusive (i.e. only
one of them at most can be set). However, once PFC was turned off,
driver automatically turned Global pause on. This is a bug.
Fix the driver behaviour to turn off PFC/Global once the user turned the
other on.
This also fixed a weird behaviour that at a current time, the profile
had both PFC and global pause configuration turned on, which is
Hardware-wise impossible and caused returning false positive indication
to query tools.
In addition, fix error code when setting global pause or PFC to change
metadata only upon successful change.
Also, removed useless debug print.
Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 72 +++++++++++++-----------
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 33 ++++++-----
drivers/net/ethernet/mellanox/mlx4/en_main.c | 4 -
3 files changed, 62 insertions(+), 47 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -156,57 +156,63 @@ static int mlx4_en_dcbnl_getnumtcs(struc
static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev)
{
struct mlx4_en_priv *priv = netdev_priv(netdev);
+ struct mlx4_en_port_profile *prof = priv->prof;
struct mlx4_en_dev *mdev = priv->mdev;
+ u8 tx_pause, tx_ppp, rx_pause, rx_ppp;
if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
return 1;
if (priv->cee_config.pfc_state) {
int tc;
+ rx_ppp = prof->rx_ppp;
+ tx_ppp = prof->tx_ppp;
- priv->prof->rx_pause = 0;
- priv->prof->tx_pause = 0;
for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) {
u8 tc_mask = 1 << tc;
switch (priv->cee_config.dcb_pfc[tc]) {
case pfc_disabled:
- priv->prof->tx_ppp &= ~tc_mask;
- priv->prof->rx_ppp &= ~tc_mask;
+ tx_ppp &= ~tc_mask;
+ rx_ppp &= ~tc_mask;
break;
case pfc_enabled_full:
- priv->prof->tx_ppp |= tc_mask;
- priv->prof->rx_ppp |= tc_mask;
+ tx_ppp |= tc_mask;
+ rx_ppp |= tc_mask;
break;
case pfc_enabled_tx:
- priv->prof->tx_ppp |= tc_mask;
- priv->prof->rx_ppp &= ~tc_mask;
+ tx_ppp |= tc_mask;
+ rx_ppp &= ~tc_mask;
break;
case pfc_enabled_rx:
- priv->prof->tx_ppp &= ~tc_mask;
- priv->prof->rx_ppp |= tc_mask;
+ tx_ppp &= ~tc_mask;
+ rx_ppp |= tc_mask;
break;
default:
break;
}
}
- en_dbg(DRV, priv, "Set pfc on\n");
+ rx_pause = !!(rx_ppp || tx_ppp) ? 0 : prof->rx_pause;
+ tx_pause = !!(rx_ppp || tx_ppp) ? 0 : prof->tx_pause;
} else {
- priv->prof->rx_pause = 1;
- priv->prof->tx_pause = 1;
- en_dbg(DRV, priv, "Set pfc off\n");
+ rx_ppp = 0;
+ tx_ppp = 0;
+ rx_pause = prof->rx_pause;
+ tx_pause = prof->tx_pause;
}
if (mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- priv->prof->tx_pause,
- priv->prof->tx_ppp,
- priv->prof->rx_pause,
- priv->prof->rx_ppp)) {
+ tx_pause, tx_ppp, rx_pause, rx_ppp)) {
en_err(priv, "Failed setting pause params\n");
return 1;
}
+ prof->tx_ppp = tx_ppp;
+ prof->rx_ppp = rx_ppp;
+ prof->tx_pause = tx_pause;
+ prof->rx_pause = rx_pause;
+
return 0;
}
@@ -408,6 +414,7 @@ static int mlx4_en_dcbnl_ieee_setpfc(str
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_port_profile *prof = priv->prof;
struct mlx4_en_dev *mdev = priv->mdev;
+ u32 tx_pause, tx_ppp, rx_pause, rx_ppp;
int err;
en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n",
@@ -416,23 +423,26 @@ static int mlx4_en_dcbnl_ieee_setpfc(str
pfc->mbc,
pfc->delay);
- prof->rx_pause = !pfc->pfc_en;
- prof->tx_pause = !pfc->pfc_en;
- prof->rx_ppp = pfc->pfc_en;
- prof->tx_ppp = pfc->pfc_en;
+ rx_pause = prof->rx_pause && !pfc->pfc_en;
+ tx_pause = prof->tx_pause && !pfc->pfc_en;
+ rx_ppp = pfc->pfc_en;
+ tx_ppp = pfc->pfc_en;
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- prof->tx_pause,
- prof->tx_ppp,
- prof->rx_pause,
- prof->rx_ppp);
- if (err)
+ tx_pause, tx_ppp, rx_pause, rx_ppp);
+ if (err) {
en_err(priv, "Failed setting pause params\n");
- else
- mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap,
- prof->rx_ppp, prof->rx_pause,
- prof->tx_ppp, prof->tx_pause);
+ return err;
+ }
+
+ mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap,
+ rx_ppp, rx_pause, tx_ppp, tx_pause);
+
+ prof->tx_ppp = tx_ppp;
+ prof->rx_ppp = rx_ppp;
+ prof->rx_pause = rx_pause;
+ prof->tx_pause = tx_pause;
return err;
}
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1046,27 +1046,32 @@ static int mlx4_en_set_pauseparam(struct
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
+ u8 tx_pause, tx_ppp, rx_pause, rx_ppp;
int err;
if (pause->autoneg)
return -EINVAL;
- priv->prof->tx_pause = pause->tx_pause != 0;
- priv->prof->rx_pause = pause->rx_pause != 0;
+ tx_pause = !!(pause->tx_pause);
+ rx_pause = !!(pause->rx_pause);
+ rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause);
+ tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause);
+
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- priv->prof->tx_pause,
- priv->prof->tx_ppp,
- priv->prof->rx_pause,
- priv->prof->rx_ppp);
- if (err)
- en_err(priv, "Failed setting pause params\n");
- else
- mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap,
- priv->prof->rx_ppp,
- priv->prof->rx_pause,
- priv->prof->tx_ppp,
- priv->prof->tx_pause);
+ tx_pause, tx_ppp, rx_pause, rx_ppp);
+ if (err) {
+ en_err(priv, "Failed setting pause params, err = %d\n", err);
+ return err;
+ }
+
+ mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap,
+ rx_ppp, rx_pause, tx_ppp, tx_pause);
+
+ priv->prof->tx_pause = tx_pause;
+ priv->prof->rx_pause = rx_pause;
+ priv->prof->tx_ppp = tx_ppp;
+ priv->prof->rx_ppp = rx_ppp;
return err;
}
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -163,9 +163,9 @@ static void mlx4_en_get_profile(struct m
params->udp_rss = 0;
}
for (i = 1; i <= MLX4_MAX_PORTS; i++) {
- params->prof[i].rx_pause = 1;
+ params->prof[i].rx_pause = !(pfcrx || pfctx);
params->prof[i].rx_ppp = pfcrx;
- params->prof[i].tx_pause = 1;
+ params->prof[i].tx_pause = !(pfcrx || pfctx);
params->prof[i].tx_ppp = pfctx;
params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit 82dd0d2a9a76fc8fa2b18d80b987d455728bf83a ]
Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.
Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.
Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vrf.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -578,12 +578,13 @@ static int vrf_finish_output(struct net
if (!IS_ERR(neigh)) {
sock_confirm_neigh(skb, neigh);
ret = neigh_output(neigh, skb);
+ rcu_read_unlock_bh();
+ return ret;
}
rcu_read_unlock_bh();
err:
- if (unlikely(ret < 0))
- vrf_tx_error(skb->dev, skb);
+ vrf_tx_error(skb->dev, skb);
return ret;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
[ Upstream commit ec1d8ccb07deaf30fd0508af6755364ac47dc08d ]
Just like function ethtool_get_ts_info(), we should also consider the
phy_driver ts_info call back. For example, driver dp83640.
Fixes: 37dd9255b2f6 ("vlan: Pass ethtool get_ts_info queries to real device.")
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/8021q/vlan_dev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -29,6 +29,7 @@
#include <linux/net_tstamp.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
+#include <linux/phy.h>
#include <net/arp.h>
#include <net/switchdev.h>
@@ -665,8 +666,11 @@ static int vlan_ethtool_get_ts_info(stru
{
const struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
const struct ethtool_ops *ops = vlan->real_dev->ethtool_ops;
+ struct phy_device *phydev = vlan->real_dev->phydev;
- if (ops->get_ts_info) {
+ if (phydev && phydev->drv && phydev->drv->ts_info) {
+ return phydev->drv->ts_info(phydev, info);
+ } else if (ops->get_ts_info) {
return ops->get_ts_info(vlan->real_dev, info);
} else {
info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jianbo Liu <[email protected]>
[ Upstream commit af1607c37d9d85a66fbcf43b7f11bf3d94b9bb69 ]
For NIC flows, the parsed attributes are not freed when we exit
successfully from mlx5e_configure_flower().
There is possible double free for eswitch flows. If error is returned
from rhashtable_insert_fast(), the parse attrs will be freed in
mlx5e_tc_del_flow(), but they will be freed again before exiting
mlx5e_configure_flower().
To fix both issues we do the following:
(1) change the condition that determines if to issue the free call to
check if this flow is NIC flow, or it does not have encap action.
(2) reorder the code such that that the check and free calls are done
before we attempt to add into the hash table.
Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow')
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -2102,19 +2102,19 @@ int mlx5e_configure_flower(struct mlx5e_
if (err != -EAGAIN)
flow->flags |= MLX5E_TC_FLOW_OFFLOADED;
+ if (!(flow->flags & MLX5E_TC_FLOW_ESWITCH) ||
+ !(flow->esw_attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP))
+ kvfree(parse_attr);
+
err = rhashtable_insert_fast(&tc->ht, &flow->node,
tc->ht_params);
- if (err)
- goto err_del_rule;
+ if (err) {
+ mlx5e_tc_del_flow(priv, flow);
+ kfree(flow);
+ }
- if (flow->flags & MLX5E_TC_FLOW_ESWITCH &&
- !(flow->esw_attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP))
- kvfree(parse_attr);
return err;
-err_del_rule:
- mlx5e_tc_del_flow(priv, flow);
-
err_free:
kvfree(parse_attr);
kfree(flow);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit dc6455a71c7fc5117977e197f67f71b49f27baba ]
We tried to remove vq poll from wait queue, but do not check whether
or not it was in a list before. This will lead double free. Fixing
this by switching to use vhost_poll_stop() which zeros poll->wqh after
removing poll from waitqueue to make sure it won't be freed twice.
Cc: Darren Kenny <[email protected]>
Reported-by: [email protected]
Fixes: 2b8b328b61c79 ("vhost_net: handle polling errors when setting backend")
Signed-off-by: Jason Wang <[email protected]>
Reviewed-by: Darren Kenny <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/vhost.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -213,8 +213,7 @@ int vhost_poll_start(struct vhost_poll *
if (mask)
vhost_poll_wakeup(&poll->wait, 0, 0, (void *)mask);
if (mask & POLLERR) {
- if (poll->wqh)
- remove_wait_queue(poll->wqh, &poll->wait);
+ vhost_poll_stop(poll);
ret = -EINVAL;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
[ Upstream commit afb133637071be6deeb8b3d0e55593ffbf63c527 ]
The sky2 ethernet stops working after system resume from suspend:
[ 582.852065] sky2 0000:04:00.0: Refused to change power state, currently in D3
The current 150ms delay is not enough, change it to 200ms can solve the
issue.
BugLink: https://bugs.launchpad.net/bugs/1758507
Cc: Stable <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/sky2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -5087,7 +5087,7 @@ static int sky2_probe(struct pci_dev *pd
INIT_WORK(&hw->restart_work, sky2_restart);
pci_set_drvdata(pdev, hw);
- pdev->d3_delay = 150;
+ pdev->d3_delay = 200;
return 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 5c78f6bfae2b10ff70e21d343e64584ea6280c26 ]
vlan_vids_add_by_dev is called right after dev hwaddr sync, so on
the err path it should unsync dev hwaddr. Otherwise, the slave
dev's hwaddr will never be unsync when this err happens.
Fixes: 1ff412ad7714 ("bonding: change the bond's vlan syncing functions with the standard ones")
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Acked-by: Andy Gospodarek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1565,7 +1565,7 @@ int bond_enslave(struct net_device *bond
if (res) {
netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n",
slave_dev->name);
- goto err_close;
+ goto err_hwaddr_unsync;
}
prev_slave = bond_last_slave(bond);
@@ -1755,9 +1755,6 @@ err_unregister:
netdev_rx_handler_unregister(slave_dev);
err_detach:
- if (!bond_uses_primary(bond))
- bond_hw_addr_flush(bond_dev, slave_dev);
-
vlan_vids_del_by_dev(slave_dev, bond_dev);
if (rcu_access_pointer(bond->primary_slave) == new_slave)
RCU_INIT_POINTER(bond->primary_slave, NULL);
@@ -1771,6 +1768,10 @@ err_detach:
synchronize_rcu();
slave_disable_netpoll(new_slave);
+err_hwaddr_unsync:
+ if (!bond_uses_primary(bond))
+ bond_hw_addr_flush(bond_dev, slave_dev);
+
err_close:
slave_dev->priv_flags &= ~IFF_BONDING;
dev_close(slave_dev);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 81e98370293afcb58340ce8bd71af7b97f925c26 ]
Check must happen before call to ipv6_addr_v4mapped()
syzbot report was :
BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline]
BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
sctp_sockaddr_af net/sctp/socket.c:359 [inline]
sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
sctp_bind+0x149/0x190 net/sctp/socket.c:332
inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293
SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
SyS_bind+0x54/0x80 net/socket.c:1460
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fd49
RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49
RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670
R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000
Local variable description: ----address@SYSC_bind
Variable was created at:
SYSC_bind+0x6f/0x4b0 net/socket.c:1461
SyS_bind+0x54/0x80 net/socket.c:1460
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Vlad Yasevich <[email protected]>
Cc: Neil Horman <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/socket.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -338,11 +338,14 @@ static struct sctp_af *sctp_sockaddr_af(
if (!opt->pf->af_supported(addr->sa.sa_family, opt))
return NULL;
- /* V4 mapped address are really of AF_INET family */
- if (addr->sa.sa_family == AF_INET6 &&
- ipv6_addr_v4mapped(&addr->v6.sin6_addr) &&
- !opt->pf->af_supported(AF_INET, opt))
- return NULL;
+ if (addr->sa.sa_family == AF_INET6) {
+ if (len < SIN6_LEN_RFC2133)
+ return NULL;
+ /* V4 mapped address are really of AF_INET family */
+ if (ipv6_addr_v4mapped(&addr->v6.sin6_addr) &&
+ !opt->pf->af_supported(AF_INET, opt))
+ return NULL;
+ }
/* If we get this far, af is valid. */
af = sctp_get_af_specific(addr->sa.sa_family);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tal Gilboa <[email protected]>
[ Upstream commit 48bfc39791b8b4a25f165e711f18b9c1617cefbc ]
The default TX moderation mode was mistakenly set to CQE based. The
intention was to add a control ability in order to improve some specific
use-cases. In general, we prefer to use EQE based moderation as it gives
much better numbers for the common cases.
CQE based causes a degradation in the common case since it resets the
moderation timer on CQE generation. This causes an issue when TSO is
well utilized (large TSO sessions). The timer is set to 16us so traffic
of ~64KB TSO sessions per second would mean timer reset (CQE per TSO
session -> long time between CQEs). In this case we quickly reach the
tcp_limit_output_bytes (256KB by default) and cause a halt in TX traffic.
By setting EQE based moderation we make sure timer would expire after
16us regardless of the packet rate.
This fixes an up to 40% packet rate and up to 23% bandwidth degradtions.
Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ")
Signed-off-by: Tal Gilboa <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4075,7 +4075,7 @@ void mlx5e_build_nic_params(struct mlx5_
struct mlx5e_params *params,
u16 max_channels)
{
- u8 cq_period_mode = 0;
+ u8 rx_cq_period_mode;
u32 link_speed = 0;
u32 pci_bw = 0;
@@ -4111,12 +4111,12 @@ void mlx5e_build_nic_params(struct mlx5_
params->lro_timeout = mlx5e_choose_lro_timeout(mdev, MLX5E_DEFAULT_LRO_TIMEOUT);
/* CQ moderation params */
- cq_period_mode = MLX5_CAP_GEN(mdev, cq_period_start_from_cqe) ?
+ rx_cq_period_mode = MLX5_CAP_GEN(mdev, cq_period_start_from_cqe) ?
MLX5_CQ_PERIOD_MODE_START_FROM_CQE :
MLX5_CQ_PERIOD_MODE_START_FROM_EQE;
params->rx_am_enabled = MLX5_CAP_GEN(mdev, cq_moderation);
- mlx5e_set_rx_cq_mode_params(params, cq_period_mode);
- mlx5e_set_tx_cq_mode_params(params, cq_period_mode);
+ mlx5e_set_rx_cq_mode_params(params, rx_cq_period_mode);
+ mlx5e_set_tx_cq_mode_params(params, MLX5_CQ_PERIOD_MODE_START_FROM_EQE);
/* TX inline */
params->tx_max_inline = mlx5e_get_max_inline_cap(mdev);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit f12c643209db0626f2f54780d86bb93bfa7a9c2d ]
When we delete a u32 key via u32_delete_key(), we forget to
call idr_remove() to remove its handle from IDR.
Fixes: e7614370d6f0 ("net_sched: use idr to allocate u32 filter handles")
Reported-by: Marcin Kabiesz <[email protected]>
Tested-by: Marcin Kabiesz <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_u32.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -478,6 +478,7 @@ static int u32_delete_key(struct tcf_pro
RCU_INIT_POINTER(*kp, key->next);
tcf_unbind_filter(tp, &key->res);
+ idr_remove(&ht->handle_idr, key->handle);
tcf_exts_get_net(&key->exts);
call_rcu(&key->rcu, u32_delete_key_freepf_rcu);
return 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 537b361fbcbcc3cd6fe2bb47069fd292b9256d16 ]
Use valid_name() to make sure user does not provide illegal
device name.
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_vti.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -212,10 +212,13 @@ static struct ip6_tnl *vti6_tnl_create(s
char name[IFNAMSIZ];
int err;
- if (p->name[0])
+ if (p->name[0]) {
+ if (!dev_valid_name(p->name))
+ goto failed;
strlcpy(name, p->name, IFNAMSIZ);
- else
+ } else {
sprintf(name, "ip6_vti%%d");
+ }
dev = alloc_netdev(sizeof(*t), name, NET_NAME_UNKNOWN, vti6_dev_setup);
if (!dev)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 5f42df013b8bc1b6511af7a04bf93b014884ae2a ]
Use dev_valid_name() to make sure user does not provide illegal
device name.
syzbot caught the following bug :
BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466
CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1b9/0x29f lib/dump_stack.c:53
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195
dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
sock_ioctl+0x47e/0x680 net/socket.c:1015
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
SYSC_ioctl fs/ioctl.c:708 [inline]
SyS_ioctl+0x24/0x30 fs/ioctl.c:706
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -319,11 +319,13 @@ static struct ip6_tnl *ip6gre_tunnel_loc
if (t || !create)
return t;
- if (parms->name[0])
+ if (parms->name[0]) {
+ if (!dev_valid_name(parms->name))
+ return NULL;
strlcpy(name, parms->name, IFNAMSIZ);
- else
+ } else {
strcpy(name, "ip6gre%d");
-
+ }
dev = alloc_netdev(sizeof(*t), name, NET_NAME_UNKNOWN,
ip6gre_tunnel_setup);
if (!dev)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit b95211e066fc3494b7c115060b2297b4ba21f025 ]
Use dev_valid_name() to make sure user does not provide illegal
device name.
syzbot caught the following bug :
BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453
CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1b9/0x29f lib/dump_stack.c:53
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221
dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
sock_ioctl+0x47e/0x680 net/socket.c:1015
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
SYSC_ioctl fs/ioctl.c:708 [inline]
SyS_ioctl+0x24/0x30 fs/ioctl.c:706
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -250,11 +250,13 @@ static struct ip_tunnel *ipip6_tunnel_lo
if (!create)
goto failed;
- if (parms->name[0])
+ if (parms->name[0]) {
+ if (!dev_valid_name(parms->name))
+ goto failed;
strlcpy(name, parms->name, IFNAMSIZ);
- else
+ } else {
strcpy(name, "sit%d");
-
+ }
dev = alloc_netdev(sizeof(*t), name, NET_NAME_UNKNOWN,
ipip6_tunnel_setup);
if (!dev)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Or Gerlitz <[email protected]>
[ Upstream commit 423c9db29943cfc43e3a408192e9efa4178af6a1 ]
Currently we use the global ipv6_stub var to access the ipv6 global
nd table. This practice gets us to troubles when the stub is only partially
set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit
343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument")
the stub is not null, but stub->nd_tbl is and we crash.
As we can access the ipv6 nd_tbl directly, the fix is just to avoid the
reference through the stub. There is one place in the code where we
issue ipv6 route lookup and keep doing it through the stub, but that
mentioned commit makes sure we get -EAFNOSUPPORT from the stack.
Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Or Gerlitz <[email protected]>
Reviewed-by: Aviv Heller <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++---
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -231,7 +231,7 @@ void mlx5e_remove_sqs_fwd_rules(struct m
static void mlx5e_rep_neigh_update_init_interval(struct mlx5e_rep_priv *rpriv)
{
#if IS_ENABLED(CONFIG_IPV6)
- unsigned long ipv6_interval = NEIGH_VAR(&ipv6_stub->nd_tbl->parms,
+ unsigned long ipv6_interval = NEIGH_VAR(&nd_tbl.parms,
DELAY_PROBE_TIME);
#else
unsigned long ipv6_interval = ~0UL;
@@ -367,7 +367,7 @@ static int mlx5e_rep_netevent_event(stru
case NETEVENT_NEIGH_UPDATE:
n = ptr;
#if IS_ENABLED(CONFIG_IPV6)
- if (n->tbl != ipv6_stub->nd_tbl && n->tbl != &arp_tbl)
+ if (n->tbl != &nd_tbl && n->tbl != &arp_tbl)
#else
if (n->tbl != &arp_tbl)
#endif
@@ -415,7 +415,7 @@ static int mlx5e_rep_netevent_event(stru
* done per device delay prob time parameter.
*/
#if IS_ENABLED(CONFIG_IPV6)
- if (!p->dev || (p->tbl != ipv6_stub->nd_tbl && p->tbl != &arp_tbl))
+ if (!p->dev || (p->tbl != &nd_tbl && p->tbl != &arp_tbl))
#else
if (!p->dev || p->tbl != &arp_tbl)
#endif
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -495,7 +495,7 @@ void mlx5e_tc_update_neigh_used_value(st
tbl = &arp_tbl;
#if IS_ENABLED(CONFIG_IPV6)
else if (m_neigh->family == AF_INET6)
- tbl = ipv6_stub->nd_tbl;
+ tbl = &nd_tbl;
#endif
else
return;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 9cb726a212a82c88c98aa9f0037fd04777cd8fe5 ]
Use dev_valid_name() to make sure user does not provide illegal
device name.
syzbot caught the following bug :
BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
Write of size 20 at addr ffff8801ac79f810 by task syzkaller268107/4482
CPU: 0 PID: 4482 Comm: syzkaller268107 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1b9/0x29f lib/dump_stack.c:53
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
__ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
ip_tunnel_create net/ipv4/ip_tunnel.c:352 [inline]
ip_tunnel_ioctl+0x818/0xd40 net/ipv4/ip_tunnel.c:861
ipip_tunnel_ioctl+0x1c5/0x420 net/ipv4/ipip.c:350
dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
sock_ioctl+0x47e/0x680 net/socket.c:1015
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
SYSC_ioctl fs/ioctl.c:708 [inline]
SyS_ioctl+0x24/0x30 fs/ioctl.c:706
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_tunnel.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -253,13 +253,14 @@ static struct net_device *__ip_tunnel_cr
struct net_device *dev;
char name[IFNAMSIZ];
- if (parms->name[0])
+ err = -E2BIG;
+ if (parms->name[0]) {
+ if (!dev_valid_name(parms->name))
+ goto failed;
strlcpy(name, parms->name, IFNAMSIZ);
- else {
- if (strlen(ops->kind) > (IFNAMSIZ - 3)) {
- err = -E2BIG;
+ } else {
+ if (strlen(ops->kind) > (IFNAMSIZ - 3))
goto failed;
- }
strlcpy(name, ops->kind, IFNAMSIZ);
strncat(name, "%d", 2);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit db7a65e3ab78e5b1c4b17c0870ebee35a4ee3257 ]
Use valid_name() to make sure user does not provide illegal
device name.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_tunnel.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -297,13 +297,16 @@ static struct ip6_tnl *ip6_tnl_create(st
struct net_device *dev;
struct ip6_tnl *t;
char name[IFNAMSIZ];
- int err = -ENOMEM;
+ int err = -E2BIG;
- if (p->name[0])
+ if (p->name[0]) {
+ if (!dev_valid_name(p->name))
+ goto failed;
strlcpy(name, p->name, IFNAMSIZ);
- else
+ } else {
sprintf(name, "ip6tnl%%d");
-
+ }
+ err = -ENOMEM;
dev = alloc_netdev(sizeof(*t), name, NET_NAME_UNKNOWN,
ip6_tnl_dev_setup);
if (!dev)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ashok Raj <[email protected]>
commit c182d2b7d0ca48e0d6ff16f7d883161238c447ed upstream.
After updating microcode on one of the threads of a core, the other
thread sibling automatically gets the update since the microcode
resources on a hyperthreaded core are shared between the two threads.
Check the microcode revision on the CPU before performing a microcode
update and thus save us the WRMSR 0x79 because it is a particularly
expensive operation.
[ Borislav: Massage changelog and coding style. ]
Signed-off-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/intel.c | 27 ++++++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -589,6 +589,17 @@ static int apply_microcode_early(struct
if (!mc)
return 0;
+ /*
+ * Save us the MSR write below - which is a particular expensive
+ * operation - when the other hyperthread has updated the microcode
+ * already.
+ */
+ rev = intel_get_microcode_revision();
+ if (rev >= mc->hdr.rev) {
+ uci->cpu_sig.rev = rev;
+ return UCODE_OK;
+ }
+
/* write microcode via MSR 0x79 */
native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
@@ -776,7 +787,7 @@ static enum ucode_state apply_microcode_
{
struct microcode_intel *mc;
struct ucode_cpu_info *uci;
- struct cpuinfo_x86 *c;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
static int prev_rev;
u32 rev;
@@ -793,6 +804,18 @@ static enum ucode_state apply_microcode_
return UCODE_NFOUND;
}
+ /*
+ * Save us the MSR write below - which is a particular expensive
+ * operation - when the other hyperthread has updated the microcode
+ * already.
+ */
+ rev = intel_get_microcode_revision();
+ if (rev >= mc->hdr.rev) {
+ uci->cpu_sig.rev = rev;
+ c->microcode = rev;
+ return UCODE_OK;
+ }
+
/* write microcode via MSR 0x79 */
wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
@@ -813,8 +836,6 @@ static enum ucode_state apply_microcode_
prev_rev = rev;
}
- c = &cpu_data(cpu);
-
uci->cpu_sig.rev = rev;
c->microcode = rev;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 6780db244d6b1537d139dea0ec8aad10cf9e4adb ]
syzbot produced a nice report [1]
Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory
to user space, because sin_zero (padding field) was not properly cleared.
[1]
BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227
CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4401c9
RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9
RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0
R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xd5/0x810 net/socket.c:2172
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
Bytes 8-15 of 16 are uninitialized
==================================================================
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
panic+0x39d/0x940 kernel/panic.c:183
kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Vlad Yasevich <[email protected]>
Cc: Neil Horman <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/ipv6.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -728,8 +728,10 @@ static int sctp_v6_addr_to_user(struct s
sctp_v6_map_v4(addr);
}
- if (addr->sa.sa_family == AF_INET)
+ if (addr->sa.sa_family == AF_INET) {
+ memset(addr->v4.sin_zero, 0, sizeof(addr->v4.sin_zero));
return sizeof(struct sockaddr_in);
+ }
return sizeof(struct sockaddr_in6);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit a9d48205d0aedda021fc3728972a9e9934c2b9de ]
We want to use dev_valid_name() to validate tunnel names,
so better use strnlen(name, IFNAMSIZ) than strlen(name) to make
sure to not upset KASAN.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1027,7 +1027,7 @@ bool dev_valid_name(const char *name)
{
if (*name == '\0')
return false;
- if (strlen(name) >= IFNAMSIZ)
+ if (strnlen(name, IFNAMSIZ) == IFNAMSIZ)
return false;
if (!strcmp(name, ".") || !strcmp(name, ".."))
return false;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <[email protected]>
[ Upstream commit 10b8a3de603df7b96004179b1b33b1708c76d144 ]
While building ipv6 datagram we currently allow arbitrary large
extheaders, even beyond pmtu size. The syzbot has found a way
to exploit the above to trigger the following splat:
kernel BUG at ./include/linux/skbuff.h:2073!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline]
RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636
RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293
RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18
RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000
R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6
R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0
FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ip6_finish_skb include/net/ipv6.h:969 [inline]
udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073
udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:640
___sys_sendmsg+0x320/0x8b0 net/socket.c:2046
__sys_sendmmsg+0x1ee/0x620 net/socket.c:2136
SYSC_sendmmsg net/socket.c:2167 [inline]
SyS_sendmmsg+0x35/0x60 net/socket.c:2162
do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4404c9
RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9
RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0
R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000
Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29
5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d
87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe
RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0
RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP:
ffff8801bc18f0f0
As stated by RFC 7112 section 5:
When a host fragments an IPv6 datagram, it MUST include the entire
IPv6 Header Chain in the First Fragment.
So this patch addresses the issue dropping datagrams with excessive
extheader length. It also updates the error path to report to the
calling socket nonnegative pmtu values.
The issue apparently predates git history.
v1 -> v2: cleanup error path, as per Eric's suggestion
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: [email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1245,7 +1245,7 @@ static int __ip6_append_data(struct sock
const struct sockcm_cookie *sockc)
{
struct sk_buff *skb, *skb_prev = NULL;
- unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu;
+ unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu, pmtu;
int exthdrlen = 0;
int dst_exthdrlen = 0;
int hh_len;
@@ -1281,6 +1281,12 @@ static int __ip6_append_data(struct sock
sizeof(struct frag_hdr) : 0) +
rt->rt6i_nfheader_len;
+ /* as per RFC 7112 section 5, the entire IPv6 Header Chain must fit
+ * the first fragment
+ */
+ if (headersize + transhdrlen > mtu)
+ goto emsgsize;
+
if (cork->length + length > mtu - headersize && ipc6->dontfrag &&
(sk->sk_protocol == IPPROTO_UDP ||
sk->sk_protocol == IPPROTO_RAW)) {
@@ -1296,9 +1302,8 @@ static int __ip6_append_data(struct sock
if (cork->length + length > maxnonfragsize - headersize) {
emsgsize:
- ipv6_local_error(sk, EMSGSIZE, fl6,
- mtu - headersize +
- sizeof(struct ipv6hdr));
+ pmtu = max_t(int, mtu - headersize + sizeof(struct ipv6hdr), 0);
+ ipv6_local_error(sk, EMSGSIZE, fl6, pmtu);
return -EMSGSIZE;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit bb8c13d61a629276a162c1d2b1a20a815cbcfbb7 upstream.
Emanuel reported an issue with a hang during microcode update because my
dumb idea to use one atomic synchronization variable for both rendezvous
- before and after update - was simply bollocks:
microcode: microcode_reload_late: late_cpus: 4
microcode: __reload_late: cpu 2 entered
microcode: __reload_late: cpu 1 entered
microcode: __reload_late: cpu 3 entered
microcode: __reload_late: cpu 0 entered
microcode: __reload_late: cpu 1 left
microcode: Timeout while waiting for CPUs rendezvous, remaining: 1
CPU1 above would finish, leave and the others will still spin waiting for
it to join.
So do two synchronization atomics instead, which makes the code a lot more
straightforward.
Also, since the update is serialized and it also takes quite some time per
microcode engine, increase the exit timeout by the number of CPUs on the
system.
That's ok because the moment all CPUs are done, that timeout will be cut
short.
Furthermore, panic when some of the CPUs timeout when returning from a
microcode update: we can't allow a system with not all cores updated.
Also, as an optimization, do not do the exit sync if microcode wasn't
updated.
Reported-by: Emanuel Czirai <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Emanuel Czirai <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/core.c | 68 +++++++++++++++++++++--------------
1 file changed, 41 insertions(+), 27 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -517,7 +517,29 @@ static int check_online_cpus(void)
return -EINVAL;
}
-static atomic_t late_cpus;
+static atomic_t late_cpus_in;
+static atomic_t late_cpus_out;
+
+static int __wait_for_cpus(atomic_t *t, long long timeout)
+{
+ int all_cpus = num_online_cpus();
+
+ atomic_inc(t);
+
+ while (atomic_read(t) < all_cpus) {
+ if (timeout < SPINUNIT) {
+ pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n",
+ all_cpus - atomic_read(t));
+ return 1;
+ }
+
+ ndelay(SPINUNIT);
+ timeout -= SPINUNIT;
+
+ touch_nmi_watchdog();
+ }
+ return 0;
+}
/*
* Returns:
@@ -527,30 +549,16 @@ static atomic_t late_cpus;
*/
static int __reload_late(void *info)
{
- unsigned int timeout = NSEC_PER_SEC;
- int all_cpus = num_online_cpus();
int cpu = smp_processor_id();
enum ucode_state err;
int ret = 0;
- atomic_dec(&late_cpus);
-
/*
* Wait for all CPUs to arrive. A load will not be attempted unless all
* CPUs show up.
* */
- while (atomic_read(&late_cpus)) {
- if (timeout < SPINUNIT) {
- pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n",
- atomic_read(&late_cpus));
- return -1;
- }
-
- ndelay(SPINUNIT);
- timeout -= SPINUNIT;
-
- touch_nmi_watchdog();
- }
+ if (__wait_for_cpus(&late_cpus_in, NSEC_PER_SEC))
+ return -1;
spin_lock(&update_lock);
apply_microcode_local(&err);
@@ -558,15 +566,22 @@ static int __reload_late(void *info)
if (err > UCODE_NFOUND) {
pr_warn("Error reloading microcode on CPU %d\n", cpu);
- ret = -1;
- } else if (err == UCODE_UPDATED) {
+ return -1;
+ /* siblings return UCODE_OK because their engine got updated already */
+ } else if (err == UCODE_UPDATED || err == UCODE_OK) {
ret = 1;
+ } else {
+ return ret;
}
- atomic_inc(&late_cpus);
-
- while (atomic_read(&late_cpus) != all_cpus)
- cpu_relax();
+ /*
+ * Increase the wait timeout to a safe value here since we're
+ * serializing the microcode update and that could take a while on a
+ * large number of CPUs. And that is fine as the *actual* timeout will
+ * be determined by the last CPU finished updating and thus cut short.
+ */
+ if (__wait_for_cpus(&late_cpus_out, NSEC_PER_SEC * num_online_cpus()))
+ panic("Timeout during microcode update!\n");
return ret;
}
@@ -579,12 +594,11 @@ static int microcode_reload_late(void)
{
int ret;
- atomic_set(&late_cpus, num_online_cpus());
+ atomic_set(&late_cpus_in, 0);
+ atomic_set(&late_cpus_out, 0);
ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
- if (ret < 0)
- return ret;
- else if (ret > 0)
+ if (ret > 0)
microcode_check();
return ret;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit 1edf8abe04090c4f41a85e42c66638be1ee69156 ]
when the following command
# tc actions replace action vlan pop index 100
is run for the first time, and tcf_vlan_init() fails allocating struct
tcf_vlan_params, tcf_vlan_cleanup() calls kfree_rcu(NULL, ...). This causes
the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: __call_rcu+0x23/0x2b0
PGD 80000000760a2067 P4D 80000000760a2067 PUD 742c1067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_vlan(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel mbcache snd_hda_codec jbd2 snd_hda_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev soundcore virtio_balloon pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_blk virtio_net ata_piix crc32c_intel libata virtio_pci i2c_core virtio_ring serio_raw virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_vlan]
CPU: 3 PID: 3119 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffaac3005fb798 EFLAGS: 00010246
RAX: ffffffffc0704080 RBX: ffff97f2b4bbe900 RCX: 00000000ffffffff
RDX: ffffffffabca5f00 RSI: 0000000000000010 RDI: 0000000000000010
RBP: 0000000000000010 R08: 0000000000000001 R09: 0000000000000044
R10: 00000000fd003000 R11: ffff97f2faab5b91 R12: 0000000000000000
R13: ffffffffabca5f00 R14: ffff97f2fb80202c R15: 00000000fffffff4
FS: 00007f68f75b4740(0000) GS:ffff97f2ffd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000072b52001 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_vlan_init+0x168/0x270 [act_vlan]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f68f69c5ba0
RSP: 002b:00007fffd79c1118 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fffd79c1240 RCX: 00007f68f69c5ba0
RDX: 0000000000000000 RSI: 00007fffd79c1190 RDI: 0000000000000003
RBP: 000000005aaa708e R08: 0000000000000002 R09: 0000000000000000
R10: 00007fffd79c0ba0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffd79c1254 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffaac3005fb798
CR2: 0000000000000018
fix this in tcf_vlan_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.
Fixes: 4c5b9d9642c8 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Acked-by: Jiri Pirko <[email protected]>
Acked-by: Manish Kurup <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_vlan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/sched/act_vlan.c
+++ b/net/sched/act_vlan.c
@@ -225,7 +225,8 @@ static void tcf_vlan_cleanup(struct tc_a
struct tcf_vlan_params *p;
p = rcu_dereference_protected(v->vlan_p, 1);
- kfree_rcu(p, rcu);
+ if (p)
+ kfree_rcu(p, rcu);
}
static int tcf_vlan_dump(struct sk_buff *skb, struct tc_action *a,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miguel Fadon Perlines <[email protected]>
[ Upstream commit 58b35f27689b5eb514fc293c332966c226b1b6e4 ]
arp_filter performs an ip_route_output search for arp source address and
checks if output device is the same where the arp request was received,
if it is not, the arp request is not answered.
This route lookup is always done on main route table so l3slave devices
never find the proper route and arp is not answered.
Passing l3mdev_master_ifindex_rcu(dev) return value as oif fixes the
lookup for l3slave devices while maintaining same behavior for non
l3slave devices as this function returns 0 in that case.
Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: Miguel Fadon Perlines <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/arp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -437,7 +437,7 @@ static int arp_filter(__be32 sip, __be32
/*unsigned long now; */
struct net *net = dev_net(dev);
- rt = ip_route_output(net, sip, tip, 0, 0);
+ rt = ip_route_output(net, sip, tip, 0, l3mdev_master_ifindex_rcu(dev));
if (IS_ERR(rt))
return 1;
if (rt->dst.dev != dev) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 2613f36ed965d0e5a595a1d931fd3b480e82d6fd upstream.
Return UCODE_NEW from the scanning functions to denote that new microcode
was found and only then attempt the expensive synchronization dance.
Reported-by: Emanuel Czirai <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Emanuel Czirai <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/microcode.h | 1 +
arch/x86/kernel/cpu/microcode/amd.c | 34 +++++++++++++++++++++-------------
arch/x86/kernel/cpu/microcode/core.c | 8 +++-----
arch/x86/kernel/cpu/microcode/intel.c | 4 +++-
4 files changed, 28 insertions(+), 19 deletions(-)
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -39,6 +39,7 @@ struct device;
enum ucode_state {
UCODE_OK = 0,
+ UCODE_NEW,
UCODE_UPDATED,
UCODE_NFOUND,
UCODE_ERROR,
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -339,7 +339,7 @@ int __init save_microcode_in_initrd_amd(
return -EINVAL;
ret = load_microcode_amd(true, x86_family(cpuid_1_eax), desc.data, desc.size);
- if (ret != UCODE_OK)
+ if (ret > UCODE_UPDATED)
return -EINVAL;
return 0;
@@ -683,27 +683,35 @@ static enum ucode_state __load_microcode
static enum ucode_state
load_microcode_amd(bool save, u8 family, const u8 *data, size_t size)
{
+ struct ucode_patch *p;
enum ucode_state ret;
/* free old equiv table */
free_equiv_cpu_table();
ret = __load_microcode_amd(family, data, size);
-
- if (ret != UCODE_OK)
+ if (ret != UCODE_OK) {
cleanup();
+ return ret;
+ }
-#ifdef CONFIG_X86_32
- /* save BSP's matching patch for early load */
- if (save) {
- struct ucode_patch *p = find_patch(0);
- if (p) {
- memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
- memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data),
- PATCH_MAX_SIZE));
- }
+ p = find_patch(0);
+ if (!p) {
+ return ret;
+ } else {
+ if (boot_cpu_data.microcode == p->patch_id)
+ return ret;
+
+ ret = UCODE_NEW;
}
-#endif
+
+ /* save BSP's matching patch for early load */
+ if (!save)
+ return ret;
+
+ memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
+ memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data), PATCH_MAX_SIZE));
+
return ret;
}
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -607,7 +607,7 @@ static ssize_t reload_store(struct devic
return size;
tmp_ret = microcode_ops->request_microcode_fw(bsp, µcode_pdev->dev, true);
- if (tmp_ret != UCODE_OK)
+ if (tmp_ret != UCODE_NEW)
return size;
get_online_cpus();
@@ -691,10 +691,8 @@ static enum ucode_state microcode_init_c
if (system_state != SYSTEM_RUNNING)
return UCODE_NFOUND;
- ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev,
- refresh_fw);
-
- if (ustate == UCODE_OK) {
+ ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev, refresh_fw);
+ if (ustate == UCODE_NEW) {
pr_debug("CPU%d updated upon init\n", cpu);
apply_microcode_on_target(cpu);
}
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -862,6 +862,7 @@ static enum ucode_state generic_load_mic
unsigned int leftover = size;
unsigned int curr_mc_size = 0, new_mc_size = 0;
unsigned int csig, cpf;
+ enum ucode_state ret = UCODE_OK;
while (leftover) {
struct microcode_header_intel mc_header;
@@ -903,6 +904,7 @@ static enum ucode_state generic_load_mic
new_mc = mc;
new_mc_size = mc_size;
mc = NULL; /* trigger new vmalloc */
+ ret = UCODE_NEW;
}
ucode_ptr += mc_size;
@@ -932,7 +934,7 @@ static enum ucode_state generic_load_mic
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
- return UCODE_OK;
+ return ret;
}
static int get_ucode_fw(void *to, const void *from, size_t n)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ashok Raj <[email protected]>
commit 30ec26da9967d0d785abc24073129a34c3211777 upstream.
Avoid loading microcode if any of the CPUs are offline, and issue a
warning. Having different microcode revisions on the system at any time
is outright dangerous.
[ Borislav: Massage changelog. ]
Signed-off-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/core.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -486,6 +486,16 @@ static void __exit microcode_dev_exit(vo
/* fake device for request_firmware */
static struct platform_device *microcode_pdev;
+static int check_online_cpus(void)
+{
+ if (num_online_cpus() == num_present_cpus())
+ return 0;
+
+ pr_err("Not all CPUs online, aborting microcode update.\n");
+
+ return -EINVAL;
+}
+
static enum ucode_state reload_for_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@@ -519,7 +529,13 @@ static ssize_t reload_store(struct devic
return size;
get_online_cpus();
+
+ ret = check_online_cpus();
+ if (ret)
+ goto put;
+
mutex_lock(µcode_mutex);
+
for_each_online_cpu(cpu) {
tmp_ret = reload_for_cpu(cpu);
if (tmp_ret > UCODE_NFOUND) {
@@ -538,6 +554,8 @@ static ssize_t reload_store(struct devic
microcode_check();
mutex_unlock(µcode_mutex);
+
+put:
put_online_cpus();
if (!ret)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit 3239534a79ee6f20cffd974173a1e62e0730e8ac ]
when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid
number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or
bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes
the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0
Oops: 0000 [#1] SMP PTI
Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
CPU: 3 PID: 5654 Comm: tc Tainted: G E 4.16.0.bpf_test+ #408
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__bpf_prog_put+0xc/0xc0
RSP: 0018:ffff9594003ef728 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000
R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054
FS: 00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0
Call Trace:
tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf]
tcf_bpf_cleanup+0x4c/0x70 [act_bpf]
__tcf_idr_release+0x79/0x140
tcf_bpf_init+0x125/0x330 [act_bpf]
tcf_action_init_1+0x2cc/0x430
? get_page_from_freelist+0x3f0/0x11b0
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.29+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? mem_cgroup_commit_charge+0x80/0x130
? page_add_new_anon_rmap+0x73/0xc0
? do_anonymous_page+0x2a2/0x560
? __handle_mm_fault+0xc75/0xe20
__sys_sendmsg+0x58/0xa0
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fcb2e58eba0
RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0
RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003
RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0
Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00
RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728
CR2: 0000000000000020
Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f)
is called only when f is not NULL.
Fixes: bbc09e7842a5 ("net/sched: fix idr leak on the error path of tcf_bpf_init()")
Reported-by: Lucas Bates <[email protected]>
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_bpf.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/net/sched/act_bpf.c
+++ b/net/sched/act_bpf.c
@@ -248,10 +248,14 @@ static int tcf_bpf_init_from_efd(struct
static void tcf_bpf_cfg_cleanup(const struct tcf_bpf_cfg *cfg)
{
- if (cfg->is_ebpf)
- bpf_prog_put(cfg->filter);
- else
- bpf_prog_destroy(cfg->filter);
+ struct bpf_prog *filter = cfg->filter;
+
+ if (filter) {
+ if (cfg->is_ebpf)
+ bpf_prog_put(filter);
+ else
+ bpf_prog_destroy(filter);
+ }
kfree(cfg->bpf_ops);
kfree(cfg->bpf_name);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit bfacfb457b36911a10140b8cb3ce76a74883ac5a ]
Once dst has been cached in socket via sk_setup_caps(),
it is illegal to call ip_rt_put() (or dst_release()),
since sk_setup_caps() did not change dst refcount.
We can still dereference it since we hold socket lock.
Caugth by syzbot :
BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185
Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088
CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1a7/0x27d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
dst_release+0x27/0xa0 net/core/dst.c:185
sk_dst_set include/net/sock.h:1812 [inline]
sk_dst_reset include/net/sock.h:1824 [inline]
sock_setbindtodevice net/core/sock.c:610 [inline]
sock_setsockopt+0x431/0x1b20 net/core/sock.c:707
SYSC_setsockopt net/socket.c:1845 [inline]
SyS_setsockopt+0x2ff/0x360 net/socket.c:1828
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4552d9
RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9
RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000
R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000
Allocated by task 20088:
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542
dst_alloc+0x11f/0x1a0 net/core/dst.c:104
rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520
__mkroute_output net/ipv4/route.c:2265 [inline]
ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493
ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322
__ip_route_output_key include/net/route.h:126 [inline]
ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577
ip_route_output_ports include/net/route.h:163 [inline]
pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453
SYSC_connect+0x213/0x4a0 net/socket.c:1639
SyS_connect+0x24/0x30 net/socket.c:1620
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Freed by task 20082:
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527
__cache_free mm/slab.c:3486 [inline]
kmem_cache_free+0x83/0x2a0 mm/slab.c:3744
dst_destroy+0x266/0x380 net/core/dst.c:140
dst_destroy_rcu+0x16/0x20 net/core/dst.c:153
__rcu_reclaim kernel/rcu/rcu.h:178 [inline]
rcu_do_batch kernel/rcu/tree.c:2675 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline]
__rcu_process_callbacks kernel/rcu/tree.c:2897 [inline]
rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285
The buggy address belongs to the object at ffff8801c54dc000
which belongs to the cache ip_dst_cache of size 168
The buggy address is located 64 bytes inside of
168-byte region [ffff8801c54dc000, ffff8801c54dc0a8)
The buggy address belongs to the page:
page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010
raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ppp/pptp.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -464,7 +464,6 @@ static int pptp_connect(struct socket *s
po->chan.mtu = dst_mtu(&rt->dst);
if (!po->chan.mtu)
po->chan.mtu = PPP_MRU;
- ip_rt_put(rt);
po->chan.mtu -= PPTP_HEADER_OVERHEAD;
po->chan.hdrlen = 2 + sizeof(struct pptp_gre_header);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ashok Raj <[email protected]>
commit a5321aec6412b20b5ad15db2d6b916c05349dbff upstream.
Original idea by Ashok, completely rewritten by Borislav.
Before you read any further: the early loading method is still the
preferred one and you should always do that. The following patch is
improving the late loading mechanism for long running jobs and cloud use
cases.
Gather all cores and serialize the microcode update on them by doing it
one-by-one to make the late update process as reliable as possible and
avoid potential issues caused by the microcode update.
[ Borislav: Rewrite completely. ]
Co-developed-by: Borislav Petkov <[email protected]>
Signed-off-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/core.c | 118 +++++++++++++++++++++++++++--------
1 file changed, 92 insertions(+), 26 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -22,13 +22,16 @@
#define pr_fmt(fmt) "microcode: " fmt
#include <linux/platform_device.h>
+#include <linux/stop_machine.h>
#include <linux/syscore_ops.h>
#include <linux/miscdevice.h>
#include <linux/capability.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
+#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/cpu.h>
+#include <linux/nmi.h>
#include <linux/fs.h>
#include <linux/mm.h>
@@ -64,6 +67,11 @@ LIST_HEAD(microcode_cache);
*/
static DEFINE_MUTEX(microcode_mutex);
+/*
+ * Serialize late loading so that CPUs get updated one-by-one.
+ */
+static DEFINE_SPINLOCK(update_lock);
+
struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
struct cpu_info_ctx {
@@ -486,6 +494,19 @@ static void __exit microcode_dev_exit(vo
/* fake device for request_firmware */
static struct platform_device *microcode_pdev;
+/*
+ * Late loading dance. Why the heavy-handed stomp_machine effort?
+ *
+ * - HT siblings must be idle and not execute other code while the other sibling
+ * is loading microcode in order to avoid any negative interactions caused by
+ * the loading.
+ *
+ * - In addition, microcode update on the cores must be serialized until this
+ * requirement can be relaxed in the future. Right now, this is conservative
+ * and good.
+ */
+#define SPINUNIT 100 /* 100 nsec */
+
static int check_online_cpus(void)
{
if (num_online_cpus() == num_present_cpus())
@@ -496,23 +517,85 @@ static int check_online_cpus(void)
return -EINVAL;
}
-static enum ucode_state reload_for_cpu(int cpu)
+static atomic_t late_cpus;
+
+/*
+ * Returns:
+ * < 0 - on error
+ * 0 - no update done
+ * 1 - microcode was updated
+ */
+static int __reload_late(void *info)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ unsigned int timeout = NSEC_PER_SEC;
+ int all_cpus = num_online_cpus();
+ int cpu = smp_processor_id();
+ enum ucode_state err;
+ int ret = 0;
+
+ atomic_dec(&late_cpus);
+
+ /*
+ * Wait for all CPUs to arrive. A load will not be attempted unless all
+ * CPUs show up.
+ * */
+ while (atomic_read(&late_cpus)) {
+ if (timeout < SPINUNIT) {
+ pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n",
+ atomic_read(&late_cpus));
+ return -1;
+ }
+
+ ndelay(SPINUNIT);
+ timeout -= SPINUNIT;
+
+ touch_nmi_watchdog();
+ }
+
+ spin_lock(&update_lock);
+ apply_microcode_local(&err);
+ spin_unlock(&update_lock);
+
+ if (err > UCODE_NFOUND) {
+ pr_warn("Error reloading microcode on CPU %d\n", cpu);
+ ret = -1;
+ } else if (err == UCODE_UPDATED) {
+ ret = 1;
+ }
- if (!uci->valid)
- return UCODE_OK;
+ atomic_inc(&late_cpus);
- return apply_microcode_on_target(cpu);
+ while (atomic_read(&late_cpus) != all_cpus)
+ cpu_relax();
+
+ return ret;
+}
+
+/*
+ * Reload microcode late on all CPUs. Wait for a sec until they
+ * all gather together.
+ */
+static int microcode_reload_late(void)
+{
+ int ret;
+
+ atomic_set(&late_cpus, num_online_cpus());
+
+ ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
+ if (ret < 0)
+ return ret;
+ else if (ret > 0)
+ microcode_check();
+
+ return ret;
}
static ssize_t reload_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
- int cpu, bsp = boot_cpu_data.cpu_index;
enum ucode_state tmp_ret = UCODE_OK;
- bool do_callback = false;
+ int bsp = boot_cpu_data.cpu_index;
unsigned long val;
ssize_t ret = 0;
@@ -534,30 +617,13 @@ static ssize_t reload_store(struct devic
goto put;
mutex_lock(µcode_mutex);
-
- for_each_online_cpu(cpu) {
- tmp_ret = reload_for_cpu(cpu);
- if (tmp_ret > UCODE_NFOUND) {
- pr_warn("Error reloading microcode on CPU %d\n", cpu);
-
- /* set retval for the first encountered reload error */
- if (!ret)
- ret = -EINVAL;
- }
-
- if (tmp_ret == UCODE_UPDATED)
- do_callback = true;
- }
-
- if (!ret && do_callback)
- microcode_check();
-
+ ret = microcode_reload_late();
mutex_unlock(µcode_mutex);
put:
put_online_cpus();
- if (!ret)
+ if (ret >= 0)
ret = size;
return ret;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Craig Dillabaugh <[email protected]>
[ Upstream commit 734549eb550c0c720bc89e50501f1b1e98cdd841 ]
Fixes a bug in the tcf_dump_walker function that can cause some actions
to not be reported when dumping a large number of actions. This issue
became more aggrevated when cookies feature was added. In particular
this issue is manifest when large cookie values are assigned to the
actions and when enough actions are created that the resulting table
must be dumped in multiple batches.
The number of actions returned in each batch is limited by the total
number of actions and the memory buffer size. With small cookies
the numeric limit is reached before the buffer size limit, which avoids
the code path triggering this bug. When large cookies are used buffer
fills before the numeric limit, and the erroneous code path is hit.
For example after creating 32 csum actions with the cookie
aaaabbbbccccdddd
$ tc actions ls action csum
total acts 26
action order 0: csum (tcp) action continue
index 1 ref 1 bind 0
cookie aaaabbbbccccdddd
.....
action order 25: csum (tcp) action continue
index 26 ref 1 bind 0
cookie aaaabbbbccccdddd
total acts 6
action order 0: csum (tcp) action continue
index 28 ref 1 bind 0
cookie aaaabbbbccccdddd
......
action order 5: csum (tcp) action continue
index 32 ref 1 bind 0
cookie aaaabbbbccccdddd
Note that the action with index 27 is omitted from the report.
Fixes: 4b3550ef530c ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")"
Signed-off-by: Craig Dillabaugh <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_api.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -135,8 +135,10 @@ static int tcf_dump_walker(struct tcf_id
continue;
nest = nla_nest_start(skb, n_i);
- if (!nest)
+ if (!nest) {
+ index--;
goto nla_put_failure;
+ }
err = tcf_action_dump_1(skb, p, 0, 0);
if (err < 0) {
index--;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit d8c3b52c00a05036e0a6b315b4b17921a7b67997 upstream.
The cache might contain a newer patch - look in there first.
A follow-on change will make sure newest patches are loaded into the
cache of microcode patches.
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/intel.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -791,9 +791,9 @@ static int collect_cpu_info(int cpu_num,
static enum ucode_state apply_microcode_intel(int cpu)
{
- struct microcode_intel *mc;
- struct ucode_cpu_info *uci;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct cpuinfo_x86 *c = &cpu_data(cpu);
+ struct microcode_intel *mc;
static int prev_rev;
u32 rev;
@@ -801,11 +801,10 @@ static enum ucode_state apply_microcode_
if (WARN_ON(raw_smp_processor_id() != cpu))
return UCODE_ERROR;
- uci = ucode_cpu_info + cpu;
- mc = uci->mc;
+ /* Look for a newer patch in our cache: */
+ mc = find_patch(uci);
if (!mc) {
- /* Look for a newer patch in our cache: */
- mc = find_patch(uci);
+ mc = uci->mc;
if (!mc)
return UCODE_NFOUND;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Barnhill <[email protected]>
[ Upstream commit 71a1c915238c970cd9bdd5bf158b1279d6b6d55b ]
At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and
IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call
for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get
incremented regardless of whether or not the netfilter hook allows the
packet to continue being processed. This change increments the counters
in ip6_forward_finish() so that it will not happen if the netfilter hook
chooses to terminate the packet, which is similar to how IPv4 works.
Signed-off-by: Jeff Barnhill <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -375,6 +375,11 @@ static int ip6_forward_proxy_check(struc
static inline int ip6_forward_finish(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
+ struct dst_entry *dst = skb_dst(skb);
+
+ __IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTFORWDATAGRAMS);
+ __IP6_ADD_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTOCTETS, skb->len);
+
return dst_output(net, sk, skb);
}
@@ -568,8 +573,6 @@ int ip6_forward(struct sk_buff *skb)
hdr->hop_limit--;
- __IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTFORWDATAGRAMS);
- __IP6_ADD_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTOCTETS, skb->len);
return NF_HOOK(NFPROTO_IPV6, NF_INET_FORWARD,
net, NULL, skb, skb->dev, dst->dev,
ip6_forward_finish);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit cfb52a5a09c8ae3a1dafb44ce549fde5b69e8117 upstream.
... so that any newer version can land in the cache and can later be
fished out by the application functions. Do that before grabbing the
hotplug lock.
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Reviewed-by: Tom Lendacky <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/core.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -499,15 +499,10 @@ static int check_online_cpus(void)
static enum ucode_state reload_for_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- enum ucode_state ustate;
if (!uci->valid)
return UCODE_OK;
- ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev, true);
- if (ustate != UCODE_OK)
- return ustate;
-
return apply_microcode_on_target(cpu);
}
@@ -515,11 +510,11 @@ static ssize_t reload_store(struct devic
struct device_attribute *attr,
const char *buf, size_t size)
{
+ int cpu, bsp = boot_cpu_data.cpu_index;
enum ucode_state tmp_ret = UCODE_OK;
bool do_callback = false;
unsigned long val;
ssize_t ret = 0;
- int cpu;
ret = kstrtoul(buf, 0, &val);
if (ret)
@@ -528,6 +523,10 @@ static ssize_t reload_store(struct devic
if (val != 1)
return size;
+ tmp_ret = microcode_ops->request_microcode_fw(bsp, µcode_pdev->dev, true);
+ if (tmp_ret != UCODE_OK)
+ return size;
+
get_online_cpus();
ret = check_online_cpus();
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Moshe Shemesh <[email protected]>
[ Upstream commit b392a2078b5e0094ff38aa0c9d2a31b3f607d4ef ]
Add check of coalescing parameters received through ethtool are within
range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the
users through ethtool. The ethtool support up to 32 bit value for each.
However, mlx5 modify cq limits the coalescing time parameter to 12 bit
and coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to
higher values.
Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality')
Signed-off-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -492,6 +492,9 @@ static int mlx5e_get_coalesce(struct net
return mlx5e_ethtool_get_coalesce(priv, coal);
}
+#define MLX5E_MAX_COAL_TIME MLX5_MAX_CQ_PERIOD
+#define MLX5E_MAX_COAL_FRAMES MLX5_MAX_CQ_COUNT
+
static void
mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal)
{
@@ -526,6 +529,20 @@ int mlx5e_ethtool_set_coalesce(struct ml
if (!MLX5_CAP_GEN(mdev, cq_moderation))
return -EOPNOTSUPP;
+ if (coal->tx_coalesce_usecs > MLX5E_MAX_COAL_TIME ||
+ coal->rx_coalesce_usecs > MLX5E_MAX_COAL_TIME) {
+ netdev_info(priv->netdev, "%s: maximum coalesce time supported is %lu usecs\n",
+ __func__, MLX5E_MAX_COAL_TIME);
+ return -ERANGE;
+ }
+
+ if (coal->tx_max_coalesced_frames > MLX5E_MAX_COAL_FRAMES ||
+ coal->rx_max_coalesced_frames > MLX5E_MAX_COAL_FRAMES) {
+ netdev_info(priv->netdev, "%s: maximum coalesced frames supported is %lu\n",
+ __func__, MLX5E_MAX_COAL_FRAMES);
+ return -ERANGE;
+ }
+
mutex_lock(&priv->state_lock);
new_channels.params = priv->channels.params;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 1dfe82ebd7d8fd43dba9948fdfb31f145014baa0 ]
skb mac header is not necessarily set at the time skb_network_protocol()
is called. Use skb->data instead.
BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242
CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443
skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739
harmonize_features net/core/dev.c:2924 [inline]
netif_skb_features+0x509/0x9b0 net/core/dev.c:3011
validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084
validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142
packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256
packet_snd net/packet/af_packet.c:2944 [inline]
packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:639
___sys_sendmsg+0x767/0x8b0 net/socket.c:2047
__sys_sendmsg+0xe5/0x210 net/socket.c:2081
Fixes: 19acc327258a ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Pravin B Shelar <[email protected]>
Reported-by: Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2719,7 +2719,7 @@ __be16 skb_network_protocol(struct sk_bu
if (unlikely(!pskb_may_pull(skb, sizeof(struct ethhdr))))
return 0;
- eth = (struct ethhdr *)skb_mac_header(skb);
+ eth = (struct ethhdr *)skb->data;
type = eth->h_proto;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit b6cdbc85234b072340b8923e69f49ec293f905dc ]
Donald reported that IPv6 route leaking between VRFs is not working.
The root cause is the strict argument in the call to rt6_lookup when
validating the nexthop spec.
ip6_route_check_nh validates the gateway and device (if given) of a
route spec. It in turn could call rt6_lookup (e.g., lookup in a given
table did not succeed so it falls back to a full lookup) and if so
sets the strict argument to 1. That means if the egress device is given,
the route lookup needs to return a result with the same device. This
strict requirement does not work with VRFs (IPv4 or IPv6) because the
oif in the flow struct is overridden with the index of the VRF device
to trigger a match on the l3mdev rule and force the lookup to its table.
The right long term solution is to add an l3mdev index to the flow
struct such that the oif is not overridden. That solution will not
backport well, so this patch aims for a simpler solution to relax the
strict argument if the route spec device is an l3mdev slave. As done
in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the
RT6_LOOKUP_F_IFACE flag needs to be removed.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Donald Sharp <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/route.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -922,6 +922,9 @@ static struct rt6_info *ip6_pol_route_lo
struct rt6_info *rt, *rt_cache;
struct fib6_node *fn;
+ if (fl6->flowi6_flags & FLOWI_FLAG_SKIP_NH_OIF)
+ flags &= ~RT6_LOOKUP_F_IFACE;
+
rcu_read_lock();
fn = fib6_lookup(&table->tb6_root, &fl6->daddr, &fl6->saddr);
restart:
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Raghuram Chary J <[email protected]>
[ Upstream commit 2d2d99ec13f62d5d2cecb6169dfdb6bbe05356d0 ]
Description:
Crash was reported with syzkaller pointing to lan78xx_write_reg routine.
Root-cause:
Proper cleanup of workqueues and init/setup routines was not happening
in failure conditions.
Fix:
Handled the error conditions by cleaning up the queues and init/setup
routines.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: Raghuram Chary J <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/lan78xx.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2863,8 +2863,7 @@ static int lan78xx_bind(struct lan78xx_n
if (ret < 0) {
netdev_warn(dev->net,
"lan78xx_setup_irq_domain() failed : %d", ret);
- kfree(pdata);
- return ret;
+ goto out1;
}
dev->net->hard_header_len += TX_OVERHEAD;
@@ -2872,14 +2871,32 @@ static int lan78xx_bind(struct lan78xx_n
/* Init all registers */
ret = lan78xx_reset(dev);
+ if (ret) {
+ netdev_warn(dev->net, "Registers INIT FAILED....");
+ goto out2;
+ }
ret = lan78xx_mdio_init(dev);
+ if (ret) {
+ netdev_warn(dev->net, "MDIO INIT FAILED.....");
+ goto out2;
+ }
dev->net->flags |= IFF_MULTICAST;
pdata->wol = WAKE_MAGIC;
return ret;
+
+out2:
+ lan78xx_remove_irq_domain(dev);
+
+out1:
+ netdev_warn(dev->net, "Bind routine FAILED");
+ cancel_work_sync(&pdata->set_multicast);
+ cancel_work_sync(&pdata->set_vlan);
+ kfree(pdata);
+ return ret;
}
static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf)
@@ -2891,6 +2908,8 @@ static void lan78xx_unbind(struct lan78x
lan78xx_remove_mdio(dev);
if (pdata) {
+ cancel_work_sync(&pdata->set_multicast);
+ cancel_work_sync(&pdata->set_vlan);
netif_dbg(dev, ifdown, dev->net, "free pdata");
kfree(pdata);
pdata = NULL;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <[email protected]>
[ Upstream commit fc5f33768cca7144f8d793205b229d46740d183b ]
The Marvell switches under some conditions will pass a frame to the
host with the port being the CPU port. Such frames are invalid, and
should be dropped. Not dropping them can result in a crash when
incrementing the receive statistics for an invalid port.
Reported-by: Chris Healy <[email protected]>
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dsa/dsa_priv.h | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -117,6 +117,7 @@ static inline struct net_device *dsa_mas
struct dsa_port *cpu_dp = dev->dsa_ptr;
struct dsa_switch_tree *dst = cpu_dp->dst;
struct dsa_switch *ds;
+ struct dsa_port *slave_port;
if (device < 0 || device >= DSA_MAX_SWITCHES)
return NULL;
@@ -128,7 +129,12 @@ static inline struct net_device *dsa_mas
if (port < 0 || port >= ds->num_ports)
return NULL;
- return ds->ports[port].slave;
+ slave_port = &ds->ports[port];
+
+ if (unlikely(slave_port->type != DSA_PORT_TYPE_USER))
+ return NULL;
+
+ return slave_port->slave;
}
/* port.c */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ashok Raj <[email protected]>
commit 91df9fdf51492aec9fed6b4cbd33160886740f47 upstream.
Updating microcode is less error prone when caches have been flushed and
depending on what exactly the microcode is updating. For example, some
of the issues around certain Broadwell parts can be addressed by doing a
full cache flush.
[ Borislav: Massage it and use native_wbinvd() in both cases. ]
Signed-off-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/intel.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -600,6 +600,12 @@ static int apply_microcode_early(struct
return UCODE_OK;
}
+ /*
+ * Writeback and invalidate caches before updating microcode to avoid
+ * internal issues depending on what the microcode is updating.
+ */
+ native_wbinvd();
+
/* write microcode via MSR 0x79 */
native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
@@ -816,6 +822,12 @@ static enum ucode_state apply_microcode_
return UCODE_OK;
}
+ /*
+ * Writeback and invalidate caches before updating microcode to avoid
+ * internal issues depending on what the microcode is updating.
+ */
+ native_wbinvd();
+
/* write microcode via MSR 0x79 */
wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Fontenot <[email protected]>
[ Upstream commit 09fb35ead58cd557aa9b20576d15816bc91a4deb ]
Initiating a kdump via the command line can cause a pending interrupt
to be handled by the ibmvnic driver when initializing the sub-CRQ
irqs during driver initialization.
NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic]
LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0
Call Trace:
[c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0
[c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90
[c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0
[c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250
[c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80
[c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0
[c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24
[c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120
[c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2484,6 +2484,12 @@ static irqreturn_t ibmvnic_interrupt_rx(
struct ibmvnic_sub_crq_queue *scrq = instance;
struct ibmvnic_adapter *adapter = scrq->adapter;
+ /* When booting a kdump kernel we can hit pending interrupts
+ * prior to completing driver initialization.
+ */
+ if (unlikely(adapter->state != VNIC_OPEN))
+ return IRQ_NONE;
+
adapter->rx_stats_buffers[scrq->scrq_num].interrupts++;
if (napi_schedule_prep(&adapter->napi[scrq->scrq_num])) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Bohac <[email protected]>
[ Upstream commit 2a3e83c6f96c513f43ce5a8c9034608ea584a255 ]
On machines where the GART aperture is mapped over physical RAM
/proc/vmcore contains the remapped range and reading it may cause hangs or
reboots.
In the past, the GART region was added into the resource map, implemented
by commit 56dd669a138c ("[PATCH] Insert GART region into resource map")
However, inserting the iomem_resource from the early GART code caused
resource conflicts with some AGP drivers (bko#72201), which got avoided by
reverting the patch in commit 707d4eefbdb3 ("Revert [PATCH] Insert GART
region into resource map"). This revert introduced the /proc/vmcore bug.
The vmcore ELF header is either prepared by the kernel (when using the
kexec_file_load syscall) or by the kexec userspace (when using the kexec_load
syscall). Since we no longer have the GART iomem resource, the userspace
kexec has no way of knowing which region to exclude from the ELF header.
Changes from v1 of this patch:
Instead of excluding the aperture from the ELF header, this patch
makes /proc/vmcore return zeroes in the second kernel when attempting to
read the aperture region. This is done by reusing the
gart_oldmem_pfn_is_ram infrastructure originally intended to exclude XEN
balooned memory. This works for both, the kexec_file_load and kexec_load
syscalls.
[Note that the GART region is the same in the first and second kernels:
regardless whether the first kernel fixed up the northbridge/bios setting
and mapped the aperture over physical memory, the second kernel finds the
northbridge properly configured by the first kernel and the aperture
never overlaps with e820 memory because the second kernel has a fake e820
map created from the crashkernel memory regions. Thus, the second kernel
keeps the aperture address/size as configured by the first kernel.]
register_oldmem_pfn_is_ram can only register one callback and returns an error
if the callback has been registered already. Since XEN used to be the only user
of this function, it never checks the return value. Now that we have more than
one user, I added a WARN_ON just in case agp, XEN, or any other future user of
register_oldmem_pfn_is_ram were to step on each other's toes.
Fixes: 707d4eefbdb3 ("Revert [PATCH] Insert GART region into resource map")
Signed-off-by: Jiri Bohac <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Toshi Kani <[email protected]>
Cc: David Airlie <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Borislav Petkov <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Vivek Goyal <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/aperture_64.c | 46 +++++++++++++++++++++++++++++++++++++++++-
arch/x86/xen/mmu_hvm.c | 2 -
2 files changed, 46 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -30,6 +30,7 @@
#include <asm/dma.h>
#include <asm/amd_nb.h>
#include <asm/x86_init.h>
+#include <linux/crash_dump.h>
/*
* Using 512M as goal, in case kexec will load kernel_big
@@ -56,6 +57,33 @@ int fallback_aper_force __initdata;
int fix_aperture __initdata = 1;
+#ifdef CONFIG_PROC_VMCORE
+/*
+ * If the first kernel maps the aperture over e820 RAM, the kdump kernel will
+ * use the same range because it will remain configured in the northbridge.
+ * Trying to dump this area via /proc/vmcore may crash the machine, so exclude
+ * it from vmcore.
+ */
+static unsigned long aperture_pfn_start, aperture_page_count;
+
+static int gart_oldmem_pfn_is_ram(unsigned long pfn)
+{
+ return likely((pfn < aperture_pfn_start) ||
+ (pfn >= aperture_pfn_start + aperture_page_count));
+}
+
+static void exclude_from_vmcore(u64 aper_base, u32 aper_order)
+{
+ aperture_pfn_start = aper_base >> PAGE_SHIFT;
+ aperture_page_count = (32 * 1024 * 1024) << aper_order >> PAGE_SHIFT;
+ WARN_ON(register_oldmem_pfn_is_ram(&gart_oldmem_pfn_is_ram));
+}
+#else
+static void exclude_from_vmcore(u64 aper_base, u32 aper_order)
+{
+}
+#endif
+
/* This code runs before the PCI subsystem is initialized, so just
access the northbridge directly. */
@@ -435,8 +463,16 @@ int __init gart_iommu_hole_init(void)
out:
if (!fix && !fallback_aper_force) {
- if (last_aper_base)
+ if (last_aper_base) {
+ /*
+ * If this is the kdump kernel, the first kernel
+ * may have allocated the range over its e820 RAM
+ * and fixed up the northbridge
+ */
+ exclude_from_vmcore(last_aper_base, last_aper_order);
+
return 1;
+ }
return 0;
}
@@ -473,6 +509,14 @@ out:
return 0;
}
+ /*
+ * If this is the kdump kernel _and_ the first kernel did not
+ * configure the aperture in the northbridge, this range may
+ * overlap with the first kernel's memory. We can't access the
+ * range through vmcore even though it should be part of the dump.
+ */
+ exclude_from_vmcore(aper_alloc, aper_order);
+
/* Fix up the north bridges */
for (i = 0; i < amd_nb_bus_dev_ranges[i].dev_limit; i++) {
int bus, dev_base, dev_limit;
--- a/arch/x86/xen/mmu_hvm.c
+++ b/arch/x86/xen/mmu_hvm.c
@@ -75,6 +75,6 @@ void __init xen_hvm_init_mmu_ops(void)
if (is_pagetable_dying_supported())
pv_mmu_ops.exit_mmap = xen_hvm_exit_mmap;
#ifdef CONFIG_PROC_VMCORE
- register_oldmem_pfn_is_ram(&xen_oldmem_pfn_is_ram);
+ WARN_ON(register_oldmem_pfn_is_ram(&xen_oldmem_pfn_is_ram));
#endif
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit faec44b6838312484d63e82286087cf2d5ebb891 ]
We should not try to do any i2c transfers before the controller is
resumed (which happens before our resume method gets called).
So we need to disable our IRQ while suspended to enforce this. The
code paths for devices with GPIOs for the int and reset pins already
disable the IRQ the through goodix_free_irq().
This commit also disables the IRQ while suspended for devices without
GPIOs for the int and reset pins.
This fixes the i2c bus sometimes getting stuck after a suspend/resume
causing the touchscreen to sometimes not work after a suspend/resume.
This has been tested on a GPD pocked device.
BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/
Tested-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Bastien Nocera <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/goodix.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -878,8 +878,10 @@ static int __maybe_unused goodix_suspend
int error;
/* We need gpio pins to suspend/resume */
- if (!ts->gpiod_int || !ts->gpiod_rst)
+ if (!ts->gpiod_int || !ts->gpiod_rst) {
+ disable_irq(client->irq);
return 0;
+ }
wait_for_completion(&ts->firmware_loading_complete);
@@ -919,8 +921,10 @@ static int __maybe_unused goodix_resume(
struct goodix_ts_data *ts = i2c_get_clientdata(client);
int error;
- if (!ts->gpiod_int || !ts->gpiod_rst)
+ if (!ts->gpiod_int || !ts->gpiod_rst) {
+ enable_irq(client->irq);
return 0;
+ }
/*
* Exit sleep mode by outputting HIGH level to INT pin
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Parav Pandit <[email protected]>
[ Upstream commit 89838118a515847d3e5c904d2e022779a7173bec ]
The 'if' logic in ucma_query_path was broken with OPA was introduced
and started to treat RoCE paths as as OPA paths. Invert the logic
of the 'if' so only OPA paths are treated as OPA paths.
Otherwise the path records returned to rdma_cma users are mangled
when in RoCE mode.
Fixes: 57520751445b ("IB/SA: Add OPA path record type")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -914,13 +914,14 @@ static ssize_t ucma_query_path(struct uc
resp->path_data[i].flags = IB_PATH_GMP | IB_PATH_PRIMARY |
IB_PATH_BIDIRECTIONAL;
- if (rec->rec_type == SA_PATH_REC_TYPE_IB) {
- ib_sa_pack_path(rec, &resp->path_data[i].path_rec);
- } else {
+ if (rec->rec_type == SA_PATH_REC_TYPE_OPA) {
struct sa_path_rec ib;
sa_convert_path_opa_to_ib(&ib, rec);
ib_sa_pack_path(&ib, &resp->path_data[i].path_rec);
+
+ } else {
+ ib_sa_pack_path(rec, &resp->path_data[i].path_rec);
}
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shivasharan S <[email protected]>
[ Upstream commit f3f7920b3910171b2999c7dc2335eb9f583e44f2 ]
Issue - Driver returns DID_NO_CONNECT when unload is in progress,
indicated using instance->unload flag. In case of dynamic unload of
driver, this flag is set before calling scsi_remove_host(). While doing
manual driver unload, user will see lots of prints for Sync Cache
command with DID_NO_CONNECT status.
Fix - Set the instance->unload flag after scsi_remove_host(). Allow
device removal process to be completed and do not block any command
before that. SCSI commands (like SYNC_CACHE) are received (as part of
scsi_remove_host) by driver during unload will be submitted further down
to the drives.
Signed-off-by: Sumit Saxena <[email protected]>
Signed-off-by: Shivasharan S <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -6822,7 +6822,6 @@ static void megasas_detach_one(struct pc
u32 pd_seq_map_sz;
instance = pci_get_drvdata(pdev);
- instance->unload = 1;
host = instance->host;
fusion = instance->ctrl_context;
@@ -6833,6 +6832,7 @@ static void megasas_detach_one(struct pc
if (instance->fw_crash_state != UNAVAILABLE)
megasas_free_host_crash_buffer(instance);
scsi_remove_host(instance->host);
+ instance->unload = 1;
if (megasas_wait_for_adapter_operational(instance))
goto skip_firing_dcmds;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <[email protected]>
[ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ]
On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO,
requires 2.0v, while the host, according to Intel Merrifield TRM,
supports 1.8v supply only.
The card announces itself as
mmc2: new ultra high speed DDR50 SDIO card at address 0001
Introduce a custom OCR mask for SDIO host controller on Intel Merrifield
and add a special case to sdhci_set_power_noreg() to override 2.0v supply
by enforcing 1.8v power choice.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-pci-core.c | 2 ++
drivers/mmc/host/sdhci.c | 7 +++++++
2 files changed, 9 insertions(+)
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -805,6 +805,8 @@ static int intel_mrfld_mmc_probe_slot(st
slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
break;
case INTEL_MRFLD_SDIO:
+ /* Advertise 2.0v for compatibility with the SDIO card's OCR */
+ slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195;
slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE |
MMC_CAP_POWER_OFF_CARD;
break;
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1470,6 +1470,13 @@ void sdhci_set_power_noreg(struct sdhci_
if (mode != MMC_POWER_OFF) {
switch (1 << vdd) {
case MMC_VDD_165_195:
+ /*
+ * Without a regulator, SDHCI does not support 2.0v
+ * so we only get here if the driver deliberately
+ * added the 2.0v range to ocr_avail. Map it to 1.8v
+ * for the purpose of turning on the power.
+ */
+ case MMC_VDD_20_21:
pwr = SDHCI_POWER_180;
break;
case MMC_VDD_29_30:
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Potapenko <[email protected]>
[ Upstream commit 7880287981b60a6808f39f297bb66936e8bdf57a ]
KMSAN reports use of uninitialized memory in the case when |alen| is
smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't
fully copied from the userspace.
Signed-off-by: Alexander Potapenko <[email protected]>
Fixes: 1da177e4c3f41524 ("Linux-2.6.12-rc2")
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netlink/af_netlink.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1052,6 +1052,9 @@ static int netlink_connect(struct socket
if (addr->sa_family != AF_NETLINK)
return -EINVAL;
+ if (alen < sizeof(struct sockaddr_nl))
+ return -EINVAL;
+
if ((nladdr->nl_groups || nladdr->nl_pid) &&
!netlink_allowed(sock, NL_CFG_F_NONROOT_SEND))
return -EPERM;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <[email protected]>
[ Upstream commit 76e28f5ffed82b1e81a86c4eb8d0420515765620 ]
Fix to return error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 5a2a30024d8c ("gpio: Add gpio driver support for ThunderX and OCTEON-TX")
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: David Daney <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-thunderx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpio/gpio-thunderx.c
+++ b/drivers/gpio/gpio-thunderx.c
@@ -553,8 +553,10 @@ static int thunderx_gpio_probe(struct pc
txgpio->irqd = irq_domain_create_hierarchy(irq_get_irq_data(txgpio->msix_entries[0].vector)->domain,
0, 0, of_node_to_fwnode(dev->of_node),
&thunderx_gpio_irqd_ops, txgpio);
- if (!txgpio->irqd)
+ if (!txgpio->irqd) {
+ err = -ENOMEM;
goto out;
+ }
/* Push on irq_data and the domain for each line. */
for (i = 0; i < ngpio; i++) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 854857f5944c59a881ff607b37ed9ed41d031a3b upstream.
It is a useless remnant from earlier times. Use the ucode_state enum
directly.
No functional change.
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Tom Lendacky <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Cc: Arjan Van De Ven <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/core.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -373,26 +373,23 @@ static int collect_cpu_info(int cpu)
return ret;
}
-struct apply_microcode_ctx {
- enum ucode_state err;
-};
-
static void apply_microcode_local(void *arg)
{
- struct apply_microcode_ctx *ctx = arg;
+ enum ucode_state *err = arg;
- ctx->err = microcode_ops->apply_microcode(smp_processor_id());
+ *err = microcode_ops->apply_microcode(smp_processor_id());
}
static int apply_microcode_on_target(int cpu)
{
- struct apply_microcode_ctx ctx = { .err = 0 };
+ enum ucode_state err;
int ret;
- ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
- if (!ret)
- ret = ctx.err;
-
+ ret = smp_call_function_single(cpu, apply_microcode_local, &err, 1);
+ if (!ret) {
+ if (err == UCODE_ERROR)
+ ret = 1;
+ }
return ret;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 1008c52c09dcb23d93f8e0ea83a6246265d2cce0 upstream.
Add a callback function which the microcode loader calls when microcode
has been updated to a newer revision. Do the callback only when no error
was encountered during loading.
Tested-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/processor.h | 1 +
arch/x86/kernel/cpu/common.c | 10 ++++++++++
arch/x86/kernel/cpu/microcode/core.c | 8 ++++++--
3 files changed, 17 insertions(+), 2 deletions(-)
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -969,4 +969,5 @@ bool xen_set_default_idle(void);
void stop_this_cpu(void *dummy);
void df_debug(struct pt_regs *regs, long error_code);
+void microcode_check(void);
#endif /* _ASM_X86_PROCESSOR_H */
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1749,3 +1749,13 @@ static int __init init_cpu_syscore(void)
return 0;
}
core_initcall(init_cpu_syscore);
+
+/*
+ * The microcode loader calls this upon late microcode load to recheck features,
+ * only when microcode has been updated. Caller holds microcode_mutex and CPU
+ * hotplug lock.
+ */
+void microcode_check(void)
+{
+ perf_check_microcode();
+}
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -509,6 +509,7 @@ static ssize_t reload_store(struct devic
const char *buf, size_t size)
{
enum ucode_state tmp_ret = UCODE_OK;
+ bool do_callback = false;
unsigned long val;
ssize_t ret = 0;
int cpu;
@@ -531,10 +532,13 @@ static ssize_t reload_store(struct devic
if (!ret)
ret = -EINVAL;
}
+
+ if (tmp_ret == UCODE_UPDATED)
+ do_callback = true;
}
- if (!ret && tmp_ret == UCODE_UPDATED)
- perf_check_microcode();
+ if (!ret && do_callback)
+ microcode_check();
mutex_unlock(µcode_mutex);
put_online_cpus();
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miquel Raynal <[email protected]>
[ Upstream commit 12663b442e5ac5aa3d6097cd3f287c71ba46d26e ]
Reads from NAND devices usually trigger bitflips, this is an expected
behavior. While bitflips are under a given threshold, the MTD core
returns 0. However, when the number of corrected bitflips is above this
same threshold, -EUCLEAN is returned to inform the upper layer that this
block is slightly dying and soon the ECC engine will be overtaken so
actions should be taken to move the data out of it.
This particular condition should not be treated like an error and the
test should continue.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/tests/oobtest.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -193,6 +193,9 @@ static int verify_eraseblock(int ebnum)
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err || ops.oobretlen != use_len) {
pr_err("error: readoob failed at %#llx\n",
(long long)addr);
@@ -227,6 +230,9 @@ static int verify_eraseblock(int ebnum)
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err || ops.oobretlen != mtd->oobavail) {
pr_err("error: readoob failed at %#llx\n",
(long long)addr);
@@ -286,6 +292,9 @@ static int verify_eraseblock_in_one_go(i
/* read entire block's OOB at one go */
err = mtd_read_oob(mtd, addr, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err || ops.oobretlen != len) {
pr_err("error: readoob failed at %#llx\n",
(long long)addr);
@@ -527,6 +536,9 @@ static int __init mtd_oobtest_init(void)
pr_info("attempting to start read past end of OOB\n");
pr_info("an error is expected...\n");
err = mtd_read_oob(mtd, addr0, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err) {
pr_info("error occurred as expected\n");
err = 0;
@@ -571,6 +583,9 @@ static int __init mtd_oobtest_init(void)
pr_info("attempting to read past end of device\n");
pr_info("an error is expected...\n");
err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err) {
pr_info("error occurred as expected\n");
err = 0;
@@ -615,6 +630,9 @@ static int __init mtd_oobtest_init(void)
pr_info("attempting to read past end of device\n");
pr_info("an error is expected...\n");
err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err) {
pr_info("error occurred as expected\n");
err = 0;
@@ -684,6 +702,9 @@ static int __init mtd_oobtest_init(void)
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
+ if (mtd_is_bitflip(err))
+ err = 0;
+
if (err)
goto out;
if (memcmpshow(addr, readbuf, writebuf,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rodrigo Vivi <[email protected]>
commit 6e3322c226f15bc1838007f5a75566f1482b8e40 upstream.
If the table result is out of bounds on the array map
there is something really wrong with VBT pin so we don't
return that vbt_pin, but only return 0 instead.
This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp:
Ignore VBT request for know invalid DDC pin.")'
Also this properly fixes commit 9c3b2689d01f ("drm/i915/cnl:
Map VBT DDC Pin to BSpec DDC Pin.")
v2: Do in a way that we don't break other platforms. (Jani)
v3: Keep debug message (Jani)
v4: Don't mess with 0 mapping was noticed by Jani and
addressed with a simple solution suggested by Lucas
that makes this even simpler.
Fixes: a8e6f3888b05 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")
Fixes: 9c3b2689d01f ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.")
Cc: Radhakrishna Sripada <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Kai Heng Feng <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Suggested-by: Lucas De Marchi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Tested-by: Kai-Heng Feng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3393ce1ed8fc43dbdb83952facaf04e644ca1d54)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_bios.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -1107,6 +1107,7 @@ static void sanitize_aux_ch(struct drm_i
}
static const u8 cnp_ddc_pin_map[] = {
+ [0] = 0, /* N/A */
[DDC_BUS_DDI_B] = GMBUS_PIN_1_BXT,
[DDC_BUS_DDI_C] = GMBUS_PIN_2_BXT,
[DDC_BUS_DDI_D] = GMBUS_PIN_4_CNP, /* sic */
@@ -1116,9 +1117,9 @@ static const u8 cnp_ddc_pin_map[] = {
static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)
{
if (HAS_PCH_CNP(dev_priv)) {
- if (vbt_pin > 0 && vbt_pin < ARRAY_SIZE(cnp_ddc_pin_map))
+ if (vbt_pin < ARRAY_SIZE(cnp_ddc_pin_map)) {
return cnp_ddc_pin_map[vbt_pin];
- if (vbt_pin > GMBUS_PIN_4_CNP) {
+ } else {
DRM_DEBUG_KMS("Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n", vbt_pin);
return 0;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Christie <[email protected]>
[ Upstream commit 810b8153c4243d2012a6ec002ddd3bbc9a9ae8c2 ]
If we cannot setup a cmd because we run out of ring space
or global pages release the blocks before sleeping. This
prevents a deadlock where dev0 has waiting_blocks set and
needs N blocks, but dev1 to devX have each allocated N / X blocks
and also hit the global block limit so they went to sleep.
find_free_blocks is not able to take the sleeping dev's
blocks becaause their waiting_blocks is set and even
if it was not the block returned by find_last_bit could equal
dbi_max. The latter will probably never happen because
DATA_BLOCK_BITS is so high but in the next patches
DATA_BLOCK_BITS and TCMU_GLOBAL_MAX_BLOCKS will be settable so
it might be lower and could happen.
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_user.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -805,6 +805,13 @@ tcmu_queue_cmd_ring(struct tcmu_cmd *tcm
int ret;
DEFINE_WAIT(__wait);
+ /*
+ * Don't leave commands partially setup because the unmap
+ * thread might need the blocks to make forward progress.
+ */
+ tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cur);
+ tcmu_cmd_reset_dbi_cur(tcmu_cmd);
+
prepare_to_wait(&udev->wait_cmdr, &__wait, TASK_INTERRUPTIBLE);
pr_debug("sleeping for ring space\n");
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 3f1f576a195aa266813cbd4ca70291deb61e0129 upstream.
... so that callers can know when microcode was updated and act
accordingly.
Tested-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/microcode.h | 9 +++++++--
arch/x86/kernel/cpu/microcode/amd.c | 10 +++++-----
arch/x86/kernel/cpu/microcode/core.c | 33 +++++++++++++++++----------------
arch/x86/kernel/cpu/microcode/intel.c | 10 +++++-----
4 files changed, 34 insertions(+), 28 deletions(-)
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -37,7 +37,12 @@ struct cpu_signature {
struct device;
-enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
+enum ucode_state {
+ UCODE_OK = 0,
+ UCODE_UPDATED,
+ UCODE_NFOUND,
+ UCODE_ERROR,
+};
struct microcode_ops {
enum ucode_state (*request_microcode_user) (int cpu,
@@ -54,7 +59,7 @@ struct microcode_ops {
* are being called.
* See also the "Synchronization" section in microcode_core.c.
*/
- int (*apply_microcode) (int cpu);
+ enum ucode_state (*apply_microcode) (int cpu);
int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
};
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -498,7 +498,7 @@ static unsigned int verify_patch_size(u8
return patch_size;
}
-static int apply_microcode_amd(int cpu)
+static enum ucode_state apply_microcode_amd(int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct microcode_amd *mc_amd;
@@ -512,7 +512,7 @@ static int apply_microcode_amd(int cpu)
p = find_patch(cpu);
if (!p)
- return 0;
+ return UCODE_NFOUND;
mc_amd = p->data;
uci->mc = p->data;
@@ -523,13 +523,13 @@ static int apply_microcode_amd(int cpu)
if (rev >= mc_amd->hdr.patch_id) {
c->microcode = rev;
uci->cpu_sig.rev = rev;
- return 0;
+ return UCODE_OK;
}
if (__apply_microcode_amd(mc_amd)) {
pr_err("CPU%d: update failed for patch_level=0x%08x\n",
cpu, mc_amd->hdr.patch_id);
- return -1;
+ return UCODE_ERROR;
}
pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
mc_amd->hdr.patch_id);
@@ -537,7 +537,7 @@ static int apply_microcode_amd(int cpu)
uci->cpu_sig.rev = mc_amd->hdr.patch_id;
c->microcode = mc_amd->hdr.patch_id;
- return 0;
+ return UCODE_UPDATED;
}
static int install_equiv_cpu_table(const u8 *buf)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -374,7 +374,7 @@ static int collect_cpu_info(int cpu)
}
struct apply_microcode_ctx {
- int err;
+ enum ucode_state err;
};
static void apply_microcode_local(void *arg)
@@ -489,31 +489,29 @@ static void __exit microcode_dev_exit(vo
/* fake device for request_firmware */
static struct platform_device *microcode_pdev;
-static int reload_for_cpu(int cpu)
+static enum ucode_state reload_for_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
enum ucode_state ustate;
- int err = 0;
if (!uci->valid)
- return err;
+ return UCODE_OK;
ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev, true);
- if (ustate == UCODE_OK)
- apply_microcode_on_target(cpu);
- else
- if (ustate == UCODE_ERROR)
- err = -EINVAL;
- return err;
+ if (ustate != UCODE_OK)
+ return ustate;
+
+ return apply_microcode_on_target(cpu);
}
static ssize_t reload_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
+ enum ucode_state tmp_ret = UCODE_OK;
unsigned long val;
+ ssize_t ret = 0;
int cpu;
- ssize_t ret = 0, tmp_ret;
ret = kstrtoul(buf, 0, &val);
if (ret)
@@ -526,15 +524,18 @@ static ssize_t reload_store(struct devic
mutex_lock(µcode_mutex);
for_each_online_cpu(cpu) {
tmp_ret = reload_for_cpu(cpu);
- if (tmp_ret != 0)
+ if (tmp_ret > UCODE_NFOUND) {
pr_warn("Error reloading microcode on CPU %d\n", cpu);
- /* save retval of the first encountered reload error */
- if (!ret)
- ret = tmp_ret;
+ /* set retval for the first encountered reload error */
+ if (!ret)
+ ret = -EINVAL;
+ }
}
- if (!ret)
+
+ if (!ret && tmp_ret == UCODE_UPDATED)
perf_check_microcode();
+
mutex_unlock(µcode_mutex);
put_online_cpus();
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -772,7 +772,7 @@ static int collect_cpu_info(int cpu_num,
return 0;
}
-static int apply_microcode_intel(int cpu)
+static enum ucode_state apply_microcode_intel(int cpu)
{
struct microcode_intel *mc;
struct ucode_cpu_info *uci;
@@ -782,7 +782,7 @@ static int apply_microcode_intel(int cpu
/* We should bind the task to the CPU */
if (WARN_ON(raw_smp_processor_id() != cpu))
- return -1;
+ return UCODE_ERROR;
uci = ucode_cpu_info + cpu;
mc = uci->mc;
@@ -790,7 +790,7 @@ static int apply_microcode_intel(int cpu
/* Look for a newer patch in our cache: */
mc = find_patch(uci);
if (!mc)
- return 0;
+ return UCODE_NFOUND;
}
/* write microcode via MSR 0x79 */
@@ -801,7 +801,7 @@ static int apply_microcode_intel(int cpu
if (rev != mc->hdr.rev) {
pr_err("CPU%d update to revision 0x%x failed\n",
cpu, mc->hdr.rev);
- return -1;
+ return UCODE_ERROR;
}
if (rev != prev_rev) {
@@ -818,7 +818,7 @@ static int apply_microcode_intel(int cpu
uci->cpu_sig.rev = rev;
c->microcode = rev;
- return 0;
+ return UCODE_UPDATED;
}
static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Feras Daoud <[email protected]>
[ Upstream commit 36e564b76f1862914ad32c35bab433e07da2ebf8 ]
The current implementation takes the child timestamp object from
the parent since the rq in mlx5i_complete_rx_cqe belongs to the parent.
This change fixes the issue by taking the correct timestamp.
Fixes: 7e7f4780c340 ("net/mlx5e: IPoIB, Use hash-table to map between QPN to child netdev")
Signed-off-by: Feras Daoud <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1196,7 +1196,9 @@ static inline void mlx5i_complete_rx_cqe
u32 cqe_bcnt,
struct sk_buff *skb)
{
+ struct hwtstamp_config *tstamp;
struct net_device *netdev;
+ struct mlx5e_priv *priv;
char *pseudo_header;
u32 qpn;
u8 *dgid;
@@ -1215,6 +1217,9 @@ static inline void mlx5i_complete_rx_cqe
return;
}
+ priv = mlx5i_epriv(netdev);
+ tstamp = &priv->tstamp;
+
g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
dgid = skb->data + MLX5_IB_GRH_DGID_OFFSET;
if ((!g) || dgid[0] != 0xff)
@@ -1235,7 +1240,7 @@ static inline void mlx5i_complete_rx_cqe
skb->ip_summed = CHECKSUM_COMPLETE;
skb->csum = csum_unfold((__force __sum16)cqe->check_sum);
- if (unlikely(mlx5e_rx_hw_stamp(rq->tstamp)))
+ if (unlikely(mlx5e_rx_hw_stamp(tstamp)))
skb_hwtstamps(skb)->hwtstamp =
mlx5_timecounter_cyc2time(rq->clock, get_cqe_ts(cqe));
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: chenxiang <[email protected]>
[ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ]
The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.
In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.
Signed-off-by: chenxiang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_expander.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -293,6 +293,7 @@ static void sas_set_ex_phy(struct domain
phy->phy->minimum_linkrate = dr->pmin_linkrate;
phy->phy->maximum_linkrate = dr->pmax_linkrate;
phy->phy->negotiated_linkrate = phy->linkrate;
+ phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);
skip:
if (new_phy)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Yan <[email protected]>
[ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ]
The intend purpose here was to goto out if smp_execute_task() returned
error. Obviously something got screwed up. We will never get these link
error statistics below:
~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count
0
Obviously we should goto error handler if smp_execute_task() returns
non-zero.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <[email protected]>
CC: John Garry <[email protected]>
CC: chenqilin <[email protected]>
CC: chenxiang <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_expander.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -686,7 +686,7 @@ int sas_smp_get_phy_events(struct sas_ph
res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
resp, RPEL_RESP_SIZE);
- if (!res)
+ if (res)
goto out;
phy->invalid_dword_count = scsi_to_u32(&resp[12]);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Yan <[email protected]>
[ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ]
We've got a memory leak with the following producer:
while true;
do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null;
done
The buffer req is allocated and not freed after we return. Fix it.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <[email protected]>
CC: John Garry <[email protected]>
CC: chenqilin <[email protected]>
CC: chenxiang <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_expander.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -695,6 +695,7 @@ int sas_smp_get_phy_events(struct sas_ph
phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
out:
+ kfree(req);
kfree(resp);
return res;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
[ Upstream commit fa1195ccc0af2d121abe0fe266a1caee8c265eea ]
We need to increase output offset in each iteration, not decrease it as
we currently do.
I guess we were lucky to finish in most cases in first iteration, so the
bug never showed. However it shows a lot when working with big (~4GB)
size data.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: 9c9f5a2f1944 ("perf tools: Introduce copyfile_offset() function")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/util.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -210,7 +210,7 @@ static int copyfile_offset(int ifd, loff
size -= ret;
off_in += ret;
- off_out -= ret;
+ off_out += ret;
}
munmap(ptr, off_in + size);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arjun Vynipadath <[email protected]>
[ Upstream commit ea0a42109aee7b92e631c4eb3f2219fadf58acdd ]
We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and
the extant logic would flag that as an error. This was already fixed in
cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in
t4_sge_init_soft() when our Page Size is 64KB".
Original Work by: Casey Leedom <[email protected]>
Signed-off-by: Arjun Vynipadath <[email protected]>
Signed-off-by: Ganesh Goudar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
@@ -2619,8 +2619,8 @@ void t4vf_sge_stop(struct adapter *adapt
int t4vf_sge_init(struct adapter *adapter)
{
struct sge_params *sge_params = &adapter->params.sge;
- u32 fl0 = sge_params->sge_fl_buffer_size[0];
- u32 fl1 = sge_params->sge_fl_buffer_size[1];
+ u32 fl_small_pg = sge_params->sge_fl_buffer_size[0];
+ u32 fl_large_pg = sge_params->sge_fl_buffer_size[1];
struct sge *s = &adapter->sge;
/*
@@ -2628,9 +2628,20 @@ int t4vf_sge_init(struct adapter *adapte
* the Physical Function Driver. Ideally we should be able to deal
* with _any_ configuration. Practice is different ...
*/
- if (fl0 != PAGE_SIZE || (fl1 != 0 && fl1 <= fl0)) {
+
+ /* We only bother using the Large Page logic if the Large Page Buffer
+ * is larger than our Page Size Buffer.
+ */
+ if (fl_large_pg <= fl_small_pg)
+ fl_large_pg = 0;
+
+ /* The Page Size Buffer must be exactly equal to our Page Size and the
+ * Large Page Size Buffer should be 0 (per above) or a power of 2.
+ */
+ if (fl_small_pg != PAGE_SIZE ||
+ (fl_large_pg & (fl_large_pg - 1)) != 0) {
dev_err(adapter->pdev_dev, "bad SGE FL buffer sizes [%d, %d]\n",
- fl0, fl1);
+ fl_small_pg, fl_large_pg);
return -EINVAL;
}
if ((sge_params->sge_control & RXPKTCPLMODE_F) !=
@@ -2642,8 +2653,8 @@ int t4vf_sge_init(struct adapter *adapte
/*
* Now translate the adapter parameters into our internal forms.
*/
- if (fl1)
- s->fl_pg_order = ilog2(fl1) - PAGE_SHIFT;
+ if (fl_large_pg)
+ s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT;
s->stat_len = ((sge_params->sge_control & EGRSTATUSPAGESIZE_F)
? 128 : 64);
s->pktshift = PKTSHIFT_G(sge_params->sge_control);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shivasharan S <[email protected]>
[ Upstream commit 7ada701d0d5e5c6d357e157a72b841db3e8d03f4 ]
Currently driver does not validate ldcount provided by firmware. If the
value is invalid, fail RAID map validation accordingly. This issue is
rare to hit in field and is fixed as part of code review.
Signed-off-by: Sumit Saxena <[email protected]>
Signed-off-by: Shivasharan S <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_fp.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -168,7 +168,7 @@ static struct MR_LD_SPAN *MR_LdSpanPtrGe
/*
* This function will Populate Driver Map using firmware raid map
*/
-void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
+static int MR_PopulateDrvRaidMap(struct megasas_instance *instance)
{
struct fusion_context *fusion = instance->ctrl_context;
struct MR_FW_RAID_MAP_ALL *fw_map_old = NULL;
@@ -259,7 +259,7 @@ void MR_PopulateDrvRaidMap(struct megasa
ld_count = (u16)le16_to_cpu(fw_map_ext->ldCount);
if (ld_count > MAX_LOGICAL_DRIVES_EXT) {
dev_dbg(&instance->pdev->dev, "megaraid_sas: LD count exposed in RAID map in not valid\n");
- return;
+ return 1;
}
pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count);
@@ -285,6 +285,12 @@ void MR_PopulateDrvRaidMap(struct megasa
fusion->ld_map[(instance->map_id & 1)];
pFwRaidMap = &fw_map_old->raidMap;
ld_count = (u16)le32_to_cpu(pFwRaidMap->ldCount);
+ if (ld_count > MAX_LOGICAL_DRIVES) {
+ dev_dbg(&instance->pdev->dev,
+ "LD count exposed in RAID map in not valid\n");
+ return 1;
+ }
+
pDrvRaidMap->totalSize = pFwRaidMap->totalSize;
pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count);
pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec;
@@ -300,6 +306,8 @@ void MR_PopulateDrvRaidMap(struct megasa
sizeof(struct MR_DEV_HANDLE_INFO) *
MAX_RAIDMAP_PHYSICAL_DEVICES);
}
+
+ return 0;
}
/*
@@ -317,8 +325,8 @@ u8 MR_ValidateMapInfo(struct megasas_ins
u16 ld;
u32 expected_size;
-
- MR_PopulateDrvRaidMap(instance);
+ if (MR_PopulateDrvRaidMap(instance))
+ return 0;
fusion = instance->ctrl_context;
drv_map = fusion->ld_drv_map[(instance->map_id & 1)];
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacob Keller <[email protected]>
[ Upstream commit 44b034b406211fc103159f82b9e601e05675c739 ]
In i40evf_reset_task we use netif_running() to determine whether or not
the device is currently up. This allows us to properly free queue memory
and shut down things before we request the hardware reset.
It turns out that we cannot be guaranteed of netif_running() returning
false until the device is fully up, as the kernel core code sets
__LINK_STATE_START prior to calling .ndo_open. Since we're not holding
the rtnl_lock(), it's possible that the driver's i40evf_open handler
function is currently being called while we're resetting.
We can't simply hold the rtnl_lock() while checking netif_running() as
this could cause a deadlock with the i40evf_open() function.
Additionally, we can't avoid the deadlock by holding the rtnl_lock()
over the whole reset path, as this essentially serializes all resets,
and can cause massive delays if we have multiple VFs on a system.
Instead, lets just check our own internal state __I40EVF_RUNNING state
field. This allows us to ensure that the state is correct and is only
set after we've finished bringing the device up.
Without this change we might free data structures about device queues
and other memory before they've been fully allocated.
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1796,7 +1796,11 @@ static void i40evf_disable_vf(struct i40
adapter->flags |= I40EVF_FLAG_PF_COMMS_FAILED;
- if (netif_running(adapter->netdev)) {
+ /* We don't use netif_running() because it may be true prior to
+ * ndo_open() returning, so we can't assume it means all our open
+ * tasks have finished, since we're not holding the rtnl_lock here.
+ */
+ if (adapter->state == __I40EVF_RUNNING) {
set_bit(__I40E_VSI_DOWN, adapter->vsi.state);
netif_carrier_off(adapter->netdev);
netif_tx_disable(adapter->netdev);
@@ -1854,6 +1858,7 @@ static void i40evf_reset_task(struct wor
struct i40evf_mac_filter *f;
u32 reg_val;
int i = 0, err;
+ bool running;
while (test_and_set_bit(__I40EVF_IN_CLIENT_TASK,
&adapter->crit_section))
@@ -1913,7 +1918,13 @@ static void i40evf_reset_task(struct wor
}
continue_reset:
- if (netif_running(netdev)) {
+ /* We don't use netif_running() because it may be true prior to
+ * ndo_open() returning, so we can't assume it means all our open
+ * tasks have finished, since we're not holding the rtnl_lock here.
+ */
+ running = (adapter->state == __I40EVF_RUNNING);
+
+ if (running) {
netif_carrier_off(netdev);
netif_tx_stop_all_queues(netdev);
adapter->link_up = false;
@@ -1964,7 +1975,10 @@ continue_reset:
mod_timer(&adapter->watchdog_timer, jiffies + 2);
- if (netif_running(adapter->netdev)) {
+ /* We were running when the reset started, so we need to restore some
+ * state here.
+ */
+ if (running) {
/* allocate transmit descriptors */
err = i40evf_setup_all_tx_resources(adapter);
if (err)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Wahren <[email protected]>
commit ab2f336cb7e629de74d8af06bcaf6b15e4230e19 upstream.
According to the devicetree binding the shutdown and device wake
GPIOs are optional. Since commit 3e81a4ca51a1 ("Bluetooth: hci_bcm:
Mandate presence of shutdown and device wake GPIO") this driver
won't probe anymore on Raspberry Pi 3 and Zero W (no device wake GPIO
connected). So fix this regression by reverting this commit partially.
Fixes: 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO")
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Lukas Wunner <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/hci_bcm.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -775,12 +775,13 @@ static int bcm_get_resources(struct bcm_
dev->clk = devm_clk_get(dev->dev, NULL);
- dev->device_wakeup = devm_gpiod_get(dev->dev, "device-wakeup",
- GPIOD_OUT_LOW);
+ dev->device_wakeup = devm_gpiod_get_optional(dev->dev, "device-wakeup",
+ GPIOD_OUT_LOW);
if (IS_ERR(dev->device_wakeup))
return PTR_ERR(dev->device_wakeup);
- dev->shutdown = devm_gpiod_get(dev->dev, "shutdown", GPIOD_OUT_LOW);
+ dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown",
+ GPIOD_OUT_LOW);
if (IS_ERR(dev->shutdown))
return PTR_ERR(dev->shutdown);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit 148b974deea927f5dbb6c468af2707b488bfa2de ]
While testing other changes, I discovered that gcc-7.2.1 produces badly
optimized code for aes_encrypt/aes_decrypt. This is especially true when
CONFIG_UBSAN_SANITIZE_ALL is enabled, where it leads to extremely
large stack usage that in turn might cause kernel stack overflows:
crypto/aes_generic.c: In function 'aes_encrypt':
crypto/aes_generic.c:1371:1: warning: the frame size of 4880 bytes is larger than 2048 bytes [-Wframe-larger-than=]
crypto/aes_generic.c: In function 'aes_decrypt':
crypto/aes_generic.c:1441:1: warning: the frame size of 4864 bytes is larger than 2048 bytes [-Wframe-larger-than=]
I verified that this problem exists on all architectures that are
supported by gcc-7.2, though arm64 in particular is less affected than
the others. I also found that gcc-7.1 and gcc-8 do not show the extreme
stack usage but still produce worse code than earlier versions for this
file, apparently because of optimization passes that generally provide
a substantial improvement in object code quality but understandably fail
to find any shortcuts in the AES algorithm.
Possible workarounds include
a) disabling -ftree-pre and -ftree-sra optimizations, this was an earlier
patch I tried, which reliably fixed the stack usage, but caused a
serious performance regression in some versions, as later testing
found.
b) disabling UBSAN on this file or all ciphers, as suggested by Ard
Biesheuvel. This would lead to massively better crypto performance in
UBSAN-enabled kernels and avoid the stack usage, but there is a concern
over whether we should exclude arbitrary files from UBSAN at all.
c) Forcing the optimization level in a different way. Similar to a),
but rather than deselecting specific optimization stages,
this now uses "gcc -Os" for this file, regardless of the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE/SIZE option. This is a reliable
workaround for the stack consumption on all architecture, and I've
retested the performance results now on x86, cycles/byte (lower is
better) for cbc(aes-generic) with 256 bit keys:
-O2 -Os
gcc-6.3.1 14.9 15.1
gcc-7.0.1 14.7 15.3
gcc-7.1.1 15.3 14.7
gcc-7.2.1 16.8 15.9
gcc-8.0.0 15.5 15.6
This implements the option c) by enabling forcing -Os on all compiler
versions starting with gcc-7.1. As a workaround for PR83356, it would
only be needed for gcc-7.2+ with UBSAN enabled, but since it also shows
better performance on gcc-7.1 without UBSAN, it seems appropriate to
use the faster version here as well.
Side note: during testing, I also played with the AES code in libressl,
which had a similar performance regression from gcc-6 to gcc-7.2,
but was three times slower overall. It might be interesting to
investigate that further and possibly port the Linux implementation
into that.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83651
Cc: Richard Biener <[email protected]>
Cc: Jakub Jelinek <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_CRYPTO_TWOFISH_COMMON) += t
obj-$(CONFIG_CRYPTO_SERPENT) += serpent_generic.o
CFLAGS_serpent_generic.o := $(call cc-option,-fsched-pressure) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
obj-$(CONFIG_CRYPTO_AES) += aes_generic.o
+CFLAGS_aes_generic.o := $(call cc-ifversion, -ge, 0701, -Os) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
obj-$(CONFIG_CRYPTO_AES_TI) += aes_ti.o
obj-$(CONFIG_CRYPTO_CAMELLIA) += camellia_generic.o
obj-$(CONFIG_CRYPTO_CAST_COMMON) += cast_common.o
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tang Junhui <[email protected]>
[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ]
In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |
So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.
In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.
Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.
[mlyle: fixed commit log formatting, permissions, line endings]
Signed-off-by: Tang Junhui <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Signed-off-by: Michael Lyle <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/alloc.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -525,15 +525,21 @@ struct open_bucket {
/*
* We keep multiple buckets open for writes, and try to segregate different
- * write streams for better cache utilization: first we look for a bucket where
- * the last write to it was sequential with the current write, and failing that
- * we look for a bucket that was last used by the same task.
+ * write streams for better cache utilization: first we try to segregate flash
+ * only volume write streams from cached devices, secondly we look for a bucket
+ * where the last write to it was sequential with the current write, and
+ * failing that we look for a bucket that was last used by the same task.
*
* The ideas is if you've got multiple tasks pulling data into the cache at the
* same time, you'll get better cache utilization if you try to segregate their
* data and preserve locality.
*
- * For example, say you've starting Firefox at the same time you're copying a
+ * For example, dirty sectors of flash only volume is not reclaimable, if their
+ * dirty sectors mixed with dirty sectors of cached device, such buckets will
+ * be marked as dirty and won't be reclaimed, though the dirty data of cached
+ * device have been written back to backend device.
+ *
+ * And say you've starting Firefox at the same time you're copying a
* bunch of files. Firefox will likely end up being fairly hot and stay in the
* cache awhile, but the data you copied might not be; if you wrote all that
* data to the same buckets it'd get invalidated at the same time.
@@ -550,7 +556,10 @@ static struct open_bucket *pick_data_buc
struct open_bucket *ret, *ret_task = NULL;
list_for_each_entry_reverse(ret, &c->data_buckets, list)
- if (!bkey_cmp(&ret->key, search))
+ if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) !=
+ UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)]))
+ continue;
+ else if (!bkey_cmp(&ret->key, search))
goto found;
else if (ret->last_write_point == write_point)
ret_task = ret;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ]
We should not call edac_mc_del_mc() if a corresponding call to
edac_mc_add_mc() has not been performed yet.
So here, we should go to err instead of err2 to branch at the right
place of the error handling path.
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: linux-edac <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/edac/mv64x60_edac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -758,7 +758,7 @@ static int mv64x60_mc_err_probe(struct p
/* Non-ECC RAM? */
printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__);
res = -ENODEV;
- goto err2;
+ goto err;
}
edac_dbg(3, "init mci\n");
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jin Yao <[email protected]>
[ Upstream commit 40c39e3046411f84bab82f66783ff3593e2bcd9b ]
When enabling '-b' option in perf record, for example,
perf record -b ...
perf report
and then browsing the annotate browser from perf report (press 'A'), it
would fail (annotate browser can't be displayed).
It's because the '.add_entry_cb' op of struct report is overwritten by
hist_iter__branch_callback() in builtin-report.c. But this function doesn't do
something like mapping symbols and sources. So next, do_annotate() will return
directly.
notes = symbol__annotation(act->ms.sym);
if (!notes->src)
return 0;
This patch adds the lost code to hist_iter__branch_callback (refer to
hist_iter__report_callback).
v2:
Fix a crash bug when perform 'perf report --stdio'.
The reason is that we init the symbol annotation only in browser mode, it
doesn't allocate/init resources for stdio mode.
So now in hist_iter__branch_callback(), it will return directly if it's not in
browser mode.
Signed-off-by: Jin Yao <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/builtin-report.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -162,12 +162,28 @@ static int hist_iter__branch_callback(st
struct hist_entry *he = iter->he;
struct report *rep = arg;
struct branch_info *bi;
+ struct perf_sample *sample = iter->sample;
+ struct perf_evsel *evsel = iter->evsel;
+ int err;
+
+ if (!ui__has_annotation())
+ return 0;
+
+ hist__account_cycles(sample->branch_stack, al, sample,
+ rep->nonany_branch_mode);
bi = he->branch_info;
+ err = addr_map_symbol__inc_samples(&bi->from, sample, evsel->idx);
+ if (err)
+ goto out;
+
+ err = addr_map_symbol__inc_samples(&bi->to, sample, evsel->idx);
+
branch_type_count(&rep->brtype_stat, &bi->flags,
bi->from.addr, bi->to.addr);
- return 0;
+out:
+ return err;
}
static int process_sample_event(struct perf_tool *tool,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gal Pressman <[email protected]>
[ Upstream commit 72dd831e24cc9487a9cd534fdd675fe97e3c1839 ]
netdev_WARN_ONCE is broken (whoops..), this fix will remove the
unnecessary "condition" parameter, add the missing comma and change
"arg" to "args".
Fixes: 375ef2b1f0d0 ("net: Introduce netdev_*_once functions")
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/netdevice.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4402,8 +4402,8 @@ do { \
WARN(1, "netdevice: %s%s\n" format, netdev_name(dev), \
netdev_reg_state(dev), ##args)
-#define netdev_WARN_ONCE(dev, condition, format, arg...) \
- WARN_ONCE(1, "netdevice: %s%s\n" format, netdev_name(dev) \
+#define netdev_WARN_ONCE(dev, format, args...) \
+ WARN_ONCE(1, "netdevice: %s%s\n" format, netdev_name(dev), \
netdev_reg_state(dev), ##args)
/* netif printk helpers, similar to netdev_printk */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Smart <[email protected]>
[ Upstream commit 278e096063f1914fccfc77a617be9fc8dbb31b0e ]
A test case revealed a race condition of an i/o completing on a thread
parallel to the delete_association generating the aborts for the
outstanding ios on the controller. The i/o completion was freeing the
target fcloop context, thus the abort task referenced the just-freed
memory.
Correct by clearing the target/initiator cross pointers in the io
completion and abort tasks before calling the callbacks. On aborts
that detect already finished io's, ensure the complete context is
called.
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/target/fcloop.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -374,6 +374,7 @@ fcloop_tgt_fcprqst_done_work(struct work
spin_lock(&tfcp_req->reqlock);
fcpreq = tfcp_req->fcpreq;
+ tfcp_req->fcpreq = NULL;
spin_unlock(&tfcp_req->reqlock);
if (tport->remoteport && fcpreq) {
@@ -615,11 +616,7 @@ fcloop_fcp_abort(struct nvme_fc_local_po
if (!tfcp_req)
/* abort has already been called */
- return;
-
- if (rport->targetport)
- nvmet_fc_rcv_fcp_abort(rport->targetport,
- &tfcp_req->tgt_fcp_req);
+ goto finish;
/* break initiator/target relationship for io */
spin_lock(&tfcp_req->reqlock);
@@ -627,6 +624,11 @@ fcloop_fcp_abort(struct nvme_fc_local_po
tfcp_req->fcpreq = NULL;
spin_unlock(&tfcp_req->reqlock);
+ if (rport->targetport)
+ nvmet_fc_rcv_fcp_abort(rport->targetport,
+ &tfcp_req->tgt_fcp_req);
+
+finish:
/* post the aborted io completion */
fcpreq->status = -ECANCELED;
schedule_work(&inireq->iniwork);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Yan <[email protected]>
[ Upstream commit 1c393b970e0f4070e4376d45f89a2d19a5c895d0 ]
Now libsas hotplug work is static, every sas event type has its own
static work, LLDD driver queues the hotplug work into shost->work_q. If
LLDD driver burst posts lots hotplug events to libsas, the hotplug
events may pending in the workqueue like
shost->work_q
new work[PORTE_BYTES_DMAED] --> |[PHYE_LOSS_OF_SIGNAL][PORTE_BYTES_DMAED] -> processing
|<-------wait worker to process-------->|
In this case, a new PORTE_BYTES_DMAED event coming, libsas try to queue
it to shost->work_q, but this work is already pending, so it would be
lost. Finally, libsas delete the related sas port and sas devices, but
LLDD driver expect libsas add the sas port and devices(last sas event).
This patch use dynamic allocated work to avoid this issue.
Signed-off-by: Yijing Wang <[email protected]>
CC: John Garry <[email protected]>
CC: Johannes Thumshirn <[email protected]>
CC: Ewan Milne <[email protected]>
CC: Christoph Hellwig <[email protected]>
CC: Tomas Henzl <[email protected]>
CC: Dan Williams <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_event.c | 74 ++++++++++++++++++++++++++++---------
drivers/scsi/libsas/sas_init.c | 27 ++++++++++++-
drivers/scsi/libsas/sas_internal.h | 6 +++
drivers/scsi/libsas/sas_phy.c | 44 ++++------------------
drivers/scsi/libsas/sas_port.c | 18 ++++-----
include/scsi/libsas.h | 17 +++++---
6 files changed, 115 insertions(+), 71 deletions(-)
--- a/drivers/scsi/libsas/sas_event.c
+++ b/drivers/scsi/libsas/sas_event.c
@@ -29,7 +29,8 @@
int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw)
{
- int rc = 0;
+ /* it's added to the defer_q when draining so return succeed */
+ int rc = 1;
if (!test_bit(SAS_HA_REGISTERED, &ha->state))
return 0;
@@ -44,19 +45,15 @@ int sas_queue_work(struct sas_ha_struct
return rc;
}
-static int sas_queue_event(int event, unsigned long *pending,
- struct sas_work *work,
+static int sas_queue_event(int event, struct sas_work *work,
struct sas_ha_struct *ha)
{
- int rc = 0;
+ unsigned long flags;
+ int rc;
- if (!test_and_set_bit(event, pending)) {
- unsigned long flags;
-
- spin_lock_irqsave(&ha->lock, flags);
- rc = sas_queue_work(ha, work);
- spin_unlock_irqrestore(&ha->lock, flags);
- }
+ spin_lock_irqsave(&ha->lock, flags);
+ rc = sas_queue_work(ha, work);
+ spin_unlock_irqrestore(&ha->lock, flags);
return rc;
}
@@ -66,6 +63,7 @@ void __sas_drain_work(struct sas_ha_stru
{
struct workqueue_struct *wq = ha->core.shost->work_q;
struct sas_work *sw, *_sw;
+ int ret;
set_bit(SAS_HA_DRAINING, &ha->state);
/* flush submitters */
@@ -78,7 +76,10 @@ void __sas_drain_work(struct sas_ha_stru
clear_bit(SAS_HA_DRAINING, &ha->state);
list_for_each_entry_safe(sw, _sw, &ha->defer_q, drain_node) {
list_del_init(&sw->drain_node);
- sas_queue_work(ha, sw);
+ ret = sas_queue_work(ha, sw);
+ if (ret != 1)
+ sas_free_event(to_asd_sas_event(&sw->work));
+
}
spin_unlock_irq(&ha->lock);
}
@@ -119,29 +120,68 @@ void sas_enable_revalidation(struct sas_
if (!test_and_clear_bit(ev, &d->pending))
continue;
- sas_queue_event(ev, &d->pending, &d->disc_work[ev].work, ha);
+ sas_queue_event(ev, &d->disc_work[ev].work, ha);
}
mutex_unlock(&ha->disco_mutex);
}
+
+static void sas_port_event_worker(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+
+ sas_port_event_fns[ev->event](work);
+ sas_free_event(ev);
+}
+
+static void sas_phy_event_worker(struct work_struct *work)
+{
+ struct asd_sas_event *ev = to_asd_sas_event(work);
+
+ sas_phy_event_fns[ev->event](work);
+ sas_free_event(ev);
+}
+
static int sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event)
{
+ struct asd_sas_event *ev;
struct sas_ha_struct *ha = phy->ha;
+ int ret;
BUG_ON(event >= PORT_NUM_EVENTS);
- return sas_queue_event(event, &phy->port_events_pending,
- &phy->port_events[event].work, ha);
+ ev = sas_alloc_event(phy);
+ if (!ev)
+ return -ENOMEM;
+
+ INIT_SAS_EVENT(ev, sas_port_event_worker, phy, event);
+
+ ret = sas_queue_event(event, &ev->work, ha);
+ if (ret != 1)
+ sas_free_event(ev);
+
+ return ret;
}
int sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
{
+ struct asd_sas_event *ev;
struct sas_ha_struct *ha = phy->ha;
+ int ret;
BUG_ON(event >= PHY_NUM_EVENTS);
- return sas_queue_event(event, &phy->phy_events_pending,
- &phy->phy_events[event].work, ha);
+ ev = sas_alloc_event(phy);
+ if (!ev)
+ return -ENOMEM;
+
+ INIT_SAS_EVENT(ev, sas_phy_event_worker, phy, event);
+
+ ret = sas_queue_event(event, &ev->work, ha);
+ if (ret != 1)
+ sas_free_event(ev);
+
+ return ret;
}
int sas_init_events(struct sas_ha_struct *sas_ha)
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -39,6 +39,7 @@
#include "../scsi_sas_internal.h"
static struct kmem_cache *sas_task_cache;
+static struct kmem_cache *sas_event_cache;
struct sas_task *sas_alloc_task(gfp_t flags)
{
@@ -364,8 +365,6 @@ void sas_prep_resume_ha(struct sas_ha_st
struct asd_sas_phy *phy = ha->sas_phy[i];
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
- phy->port_events_pending = 0;
- phy->phy_events_pending = 0;
phy->frame_rcvd_size = 0;
}
}
@@ -555,20 +554,42 @@ sas_domain_attach_transport(struct sas_d
}
EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy)
+{
+ gfp_t flags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
+
+ return kmem_cache_zalloc(sas_event_cache, flags);
+}
+
+void sas_free_event(struct asd_sas_event *event)
+{
+ kmem_cache_free(sas_event_cache, event);
+}
+
/* ---------- SAS Class register/unregister ---------- */
static int __init sas_class_init(void)
{
sas_task_cache = KMEM_CACHE(sas_task, SLAB_HWCACHE_ALIGN);
if (!sas_task_cache)
- return -ENOMEM;
+ goto out;
+
+ sas_event_cache = KMEM_CACHE(asd_sas_event, SLAB_HWCACHE_ALIGN);
+ if (!sas_event_cache)
+ goto free_task_kmem;
return 0;
+free_task_kmem:
+ kmem_cache_destroy(sas_task_cache);
+out:
+ return -ENOMEM;
}
static void __exit sas_class_exit(void)
{
kmem_cache_destroy(sas_task_cache);
+ kmem_cache_destroy(sas_event_cache);
}
MODULE_AUTHOR("Luben Tuikov <[email protected]>");
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -61,6 +61,9 @@ int sas_show_oob_mode(enum sas_oob_mode
int sas_register_phys(struct sas_ha_struct *sas_ha);
void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy);
+void sas_free_event(struct asd_sas_event *event);
+
int sas_register_ports(struct sas_ha_struct *sas_ha);
void sas_unregister_ports(struct sas_ha_struct *sas_ha);
@@ -99,6 +102,9 @@ void sas_hae_reset(struct work_struct *w
void sas_free_device(struct kref *kref);
+extern const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS];
+extern const work_func_t sas_port_event_fns[PORT_NUM_EVENTS];
+
#ifdef CONFIG_SCSI_SAS_HOST_SMP
extern void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost);
#else
--- a/drivers/scsi/libsas/sas_phy.c
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -35,7 +35,6 @@ static void sas_phye_loss_of_signal(stru
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PHYE_LOSS_OF_SIGNAL, &phy->phy_events_pending);
phy->error = 0;
sas_deform_port(phy, 1);
}
@@ -45,7 +44,6 @@ static void sas_phye_oob_done(struct wor
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PHYE_OOB_DONE, &phy->phy_events_pending);
phy->error = 0;
}
@@ -58,8 +56,6 @@ static void sas_phye_oob_error(struct wo
struct sas_internal *i =
to_sas_internal(sas_ha->core.shost->transportt);
- clear_bit(PHYE_OOB_ERROR, &phy->phy_events_pending);
-
sas_deform_port(phy, 1);
if (!port && phy->enabled && i->dft->lldd_control_phy) {
@@ -88,8 +84,6 @@ static void sas_phye_spinup_hold(struct
struct sas_internal *i =
to_sas_internal(sas_ha->core.shost->transportt);
- clear_bit(PHYE_SPINUP_HOLD, &phy->phy_events_pending);
-
phy->error = 0;
i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL);
}
@@ -99,8 +93,6 @@ static void sas_phye_resume_timeout(stru
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PHYE_RESUME_TIMEOUT, &phy->phy_events_pending);
-
/* phew, lldd got the phy back in the nick of time */
if (!phy->suspended) {
dev_info(&phy->phy->dev, "resume timeout cancelled\n");
@@ -119,39 +111,12 @@ int sas_register_phys(struct sas_ha_stru
{
int i;
- static const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS] = {
- [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
- [PHYE_OOB_DONE] = sas_phye_oob_done,
- [PHYE_OOB_ERROR] = sas_phye_oob_error,
- [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
- [PHYE_RESUME_TIMEOUT] = sas_phye_resume_timeout,
-
- };
-
- static const work_func_t sas_port_event_fns[PORT_NUM_EVENTS] = {
- [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
- [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
- [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
- [PORTE_TIMER_EVENT] = sas_porte_timer_event,
- [PORTE_HARD_RESET] = sas_porte_hard_reset,
- };
-
/* Now register the phys. */
for (i = 0; i < sas_ha->num_phys; i++) {
- int k;
struct asd_sas_phy *phy = sas_ha->sas_phy[i];
phy->error = 0;
INIT_LIST_HEAD(&phy->port_phy_el);
- for (k = 0; k < PORT_NUM_EVENTS; k++) {
- INIT_SAS_WORK(&phy->port_events[k].work, sas_port_event_fns[k]);
- phy->port_events[k].phy = phy;
- }
-
- for (k = 0; k < PHY_NUM_EVENTS; k++) {
- INIT_SAS_WORK(&phy->phy_events[k].work, sas_phy_event_fns[k]);
- phy->phy_events[k].phy = phy;
- }
phy->port = NULL;
phy->ha = sas_ha;
@@ -179,3 +144,12 @@ int sas_register_phys(struct sas_ha_stru
return 0;
}
+
+const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS] = {
+ [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
+ [PHYE_OOB_DONE] = sas_phye_oob_done,
+ [PHYE_OOB_ERROR] = sas_phye_oob_error,
+ [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+ [PHYE_RESUME_TIMEOUT] = sas_phye_resume_timeout,
+
+};
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -261,8 +261,6 @@ void sas_porte_bytes_dmaed(struct work_s
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PORTE_BYTES_DMAED, &phy->port_events_pending);
-
sas_form_port(phy);
}
@@ -273,8 +271,6 @@ void sas_porte_broadcast_rcvd(struct wor
unsigned long flags;
u32 prim;
- clear_bit(PORTE_BROADCAST_RCVD, &phy->port_events_pending);
-
spin_lock_irqsave(&phy->sas_prim_lock, flags);
prim = phy->sas_prim;
spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
@@ -288,8 +284,6 @@ void sas_porte_link_reset_err(struct wor
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PORTE_LINK_RESET_ERR, &phy->port_events_pending);
-
sas_deform_port(phy, 1);
}
@@ -298,8 +292,6 @@ void sas_porte_timer_event(struct work_s
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PORTE_TIMER_EVENT, &phy->port_events_pending);
-
sas_deform_port(phy, 1);
}
@@ -308,8 +300,6 @@ void sas_porte_hard_reset(struct work_st
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
- clear_bit(PORTE_HARD_RESET, &phy->port_events_pending);
-
sas_deform_port(phy, 1);
}
@@ -353,3 +343,11 @@ void sas_unregister_ports(struct sas_ha_
sas_deform_port(sas_ha->sas_phy[i], 0);
}
+
+const work_func_t sas_port_event_fns[PORT_NUM_EVENTS] = {
+ [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
+ [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
+ [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
+ [PORTE_TIMER_EVENT] = sas_porte_timer_event,
+ [PORTE_HARD_RESET] = sas_porte_hard_reset,
+};
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -292,6 +292,7 @@ struct asd_sas_port {
struct asd_sas_event {
struct sas_work work;
struct asd_sas_phy *phy;
+ int event;
};
static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
@@ -301,17 +302,21 @@ static inline struct asd_sas_event *to_a
return ev;
}
+static inline void INIT_SAS_EVENT(struct asd_sas_event *ev,
+ void (*fn)(struct work_struct *),
+ struct asd_sas_phy *phy, int event)
+{
+ INIT_SAS_WORK(&ev->work, fn);
+ ev->phy = phy;
+ ev->event = event;
+}
+
+
/* The phy pretty much is controlled by the LLDD.
* The class only reads those fields.
*/
struct asd_sas_phy {
/* private: */
- struct asd_sas_event port_events[PORT_NUM_EVENTS];
- struct asd_sas_event phy_events[PHY_NUM_EVENTS];
-
- unsigned long port_events_pending;
- unsigned long phy_events_pending;
-
int error;
int suspended;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
[ Upstream commit 7d4901a90d02500c8011472a060f9b2e60e6e605 ]
blk_mq_pci_map_queues() may not map one CPU into any hw queue, but its
previous map isn't cleared yet, and may point to one stale hw queue
index.
This patch fixes the following issue by clearing the mapping table before
setting it up in blk_mq_pci_map_queues().
This patches fixes this following issue reported by Zhang Yi:
[ 101.202734] BUG: unable to handle kernel NULL pointer dereference at 0000000094d3013f
[ 101.211487] IP: blk_mq_map_swqueue+0xbc/0x200
[ 101.216346] PGD 0 P4D 0
[ 101.219171] Oops: 0000 [#1] SMP
[ 101.222674] Modules linked in: sunrpc ipmi_ssif vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore mxm_wmi intel_rapl_perf iTCO_wdt ipmi_si ipmi_devintf pcspkr iTCO_vendor_support sg dcdbas ipmi_msghandler wmi mei_me lpc_ich shpchp mei acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel libata tg3 nvme nvme_core megaraid_sas ptp i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 101.284881] CPU: 0 PID: 504 Comm: kworker/u25:5 Not tainted 4.15.0-rc2 #1
[ 101.292455] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[ 101.301001] Workqueue: nvme-wq nvme_reset_work [nvme]
[ 101.306636] task: 00000000f2c53190 task.stack: 000000002da874f9
[ 101.313241] RIP: 0010:blk_mq_map_swqueue+0xbc/0x200
[ 101.318681] RSP: 0018:ffffc9000234fd70 EFLAGS: 00010282
[ 101.324511] RAX: ffff88047ffc9480 RBX: ffff88047e130850 RCX: 0000000000000000
[ 101.332471] RDX: ffffe8ffffd40580 RSI: ffff88047e509b40 RDI: ffff88046f37a008
[ 101.340432] RBP: 000000000000000b R08: ffff88046f37a008 R09: 0000000011f94280
[ 101.348392] R10: ffff88047ffd4d00 R11: 0000000000000000 R12: ffff88046f37a008
[ 101.356353] R13: ffff88047e130f38 R14: 000000000000000b R15: ffff88046f37a558
[ 101.364314] FS: 0000000000000000(0000) GS:ffff880277c00000(0000) knlGS:0000000000000000
[ 101.373342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.379753] CR2: 0000000000000098 CR3: 000000047f409004 CR4: 00000000001606f0
[ 101.387714] Call Trace:
[ 101.390445] blk_mq_update_nr_hw_queues+0xbf/0x130
[ 101.395791] nvme_reset_work+0x6f4/0xc06 [nvme]
[ 101.400848] ? pick_next_task_fair+0x290/0x5f0
[ 101.405807] ? __switch_to+0x1f5/0x430
[ 101.409988] ? put_prev_entity+0x2f/0xd0
[ 101.414365] process_one_work+0x141/0x340
[ 101.418836] worker_thread+0x47/0x3e0
[ 101.422921] kthread+0xf5/0x130
[ 101.426424] ? rescuer_thread+0x380/0x380
[ 101.430896] ? kthread_associate_blkcg+0x90/0x90
[ 101.436048] ret_from_fork+0x1f/0x30
[ 101.440034] Code: 48 83 3c ca 00 0f 84 2b 01 00 00 48 63 cd 48 8b 93 10 01 00 00 8b 0c 88 48 8b 83 20 01 00 00 4a 03 14 f5 60 04 af 81 48 8b 0c c8 <48> 8b 81 98 00 00 00 f0 4c 0f ab 30 8b 81 f8 00 00 00 89 42 44
[ 101.461116] RIP: blk_mq_map_swqueue+0xbc/0x200 RSP: ffffc9000234fd70
[ 101.468205] CR2: 0000000000000098
[ 101.471907] ---[ end trace 5fe710f98228a3ca ]---
[ 101.482489] Kernel panic - not syncing: Fatal exception
[ 101.488505] Kernel Offset: disabled
[ 101.497752] ---[ end Kernel panic - not syncing: Fatal exception
Reviewed-by: Christoph Hellwig <[email protected]>
Suggested-by: Christoph Hellwig <[email protected]>
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-mq.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2603,9 +2603,27 @@ static int blk_mq_alloc_rq_maps(struct b
static int blk_mq_update_queue_map(struct blk_mq_tag_set *set)
{
- if (set->ops->map_queues)
+ if (set->ops->map_queues) {
+ int cpu;
+ /*
+ * transport .map_queues is usually done in the following
+ * way:
+ *
+ * for (queue = 0; queue < set->nr_hw_queues; queue++) {
+ * mask = get_cpu_mask(queue)
+ * for_each_cpu(cpu, mask)
+ * set->mq_map[cpu] = queue;
+ * }
+ *
+ * When we need to remap, the table has to be cleared for
+ * killing stale mapping since one CPU may not be mapped
+ * to any hw queue.
+ */
+ for_each_possible_cpu(cpu)
+ set->mq_map[cpu] = 0;
+
return set->ops->map_queues(set);
- else
+ } else
return blk_mq_map_queues(set);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit 5a1e59533380a3fd04593e4ab2d4633ebf7745c1 upstream.
THIS_MODULE evaluates to NULL when used from code built into the kernel,
thus breaking built-in transport modules. Remove the bogus check.
Fixes: 0de5cd36 ("nvme-fabrics: protect against module unload during create_ctrl")
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/fabrics.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -493,7 +493,7 @@ EXPORT_SYMBOL_GPL(nvmf_should_reconnect)
*/
int nvmf_register_transport(struct nvmf_transport_ops *ops)
{
- if (!ops->create_ctrl || !ops->module)
+ if (!ops->create_ctrl)
return -EINVAL;
down_write(&nvmf_transports_rwsem);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yintian Tao <[email protected]>
[ Upstream commit a25513e7b9b15c318ec44113682e988829aef746 ]
add smu_free_memory when smu fini to prevent memory leakage
v2: squash in typo fix (Yintian) and warning (Harry)
Signed-off-by: Yintian Tao <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c
@@ -648,6 +648,12 @@ int smu7_init(struct pp_hwmgr *hwmgr)
int smu7_smu_fini(struct pp_hwmgr *hwmgr)
{
+ struct smu7_smumgr *smu_data = (struct smu7_smumgr *)(hwmgr->smu_backend);
+
+ smu_free_memory(hwmgr->device, (void *) smu_data->header_buffer.handle);
+ if (!cgs_is_virtualization_enabled(hwmgr->device))
+ smu_free_memory(hwmgr->device, (void *) smu_data->smu_buffer.handle);
+
kfree(hwmgr->smu_backend);
hwmgr->smu_backend = NULL;
cgs_rel_firmware(hwmgr->device, CGS_UCODE_ID_SMU);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Hemminger <[email protected]>
[ Upstream commit 06028d15177a1b406b7b075ea47c6a352732f23a ]
In order for userspace application to signal host, it needs the
host to support the monitor page property. Check for the flag
and fail if this is not supported.
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uio/uio_hv_generic.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -124,6 +124,13 @@ hv_uio_probe(struct hv_device *dev,
if (ret)
goto fail;
+ /* Communicating with host has to be via shared memory not hypercall */
+ if (!dev->channel->offermsg.monitor_allocated) {
+ dev_err(&dev->device, "vmbus channel requires hypercall\n");
+ ret = -ENOTSUPP;
+ goto fail_close;
+ }
+
dev->channel->inbound.ring_buffer->interrupt_mask = 1;
set_channel_read_mode(dev->channel, HV_CALL_DIRECT);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jian Shen <[email protected]>
[ Upstream commit 57ffee737b36dbb81e8e60a37e01791553157a5e ]
The member "stats_offset" was designed to indicate the offset
of each member of struct ring_stats in struct hns3_enet_ring,
but forgot to add the offset of the member in struct ring_stats.
Fixes: 496d03e960a ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c
@@ -23,7 +23,8 @@ struct hns3_stats {
#define HNS3_TQP_STAT(_string, _member) { \
.stats_string = _string, \
.stats_size = FIELD_SIZEOF(struct ring_stats, _member), \
- .stats_offset = offsetof(struct hns3_enet_ring, stats), \
+ .stats_offset = offsetof(struct hns3_enet_ring, stats) +\
+ offsetof(struct ring_stats, _member), \
} \
static const struct hns3_stats hns3_txq_stats[] = {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roy Shterman <[email protected]>
[ Upstream commit 0de5cd367c6aa2a31a1c931628f778f79f8ef22e ]
NVMe transport driver module unload may (and usually does) trigger
iteration over the active controllers and delete them all (sometimes
under a mutex). However, a controller can be created concurrently with
module unload which can lead to leakage of resources (most important char
device node leakage) in case the controller creation occured after the
unload delete and drain sequence. To protect against this, we take a
module reference to guarantee that the nvme transport driver is not
unloaded while creating a controller.
Signed-off-by: Roy Shterman <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/fabrics.c | 17 +++++++++++++----
drivers/nvme/host/fabrics.h | 2 ++
drivers/nvme/host/fc.c | 1 +
drivers/nvme/host/rdma.c | 1 +
drivers/nvme/target/loop.c | 1 +
5 files changed, 18 insertions(+), 4 deletions(-)
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -493,7 +493,7 @@ EXPORT_SYMBOL_GPL(nvmf_should_reconnect)
*/
int nvmf_register_transport(struct nvmf_transport_ops *ops)
{
- if (!ops->create_ctrl)
+ if (!ops->create_ctrl || !ops->module)
return -EINVAL;
down_write(&nvmf_transports_rwsem);
@@ -869,32 +869,41 @@ nvmf_create_ctrl(struct device *dev, con
goto out_unlock;
}
+ if (!try_module_get(ops->module)) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
ret = nvmf_check_required_opts(opts, ops->required_opts);
if (ret)
- goto out_unlock;
+ goto out_module_put;
ret = nvmf_check_allowed_opts(opts, NVMF_ALLOWED_OPTS |
ops->allowed_opts | ops->required_opts);
if (ret)
- goto out_unlock;
+ goto out_module_put;
ctrl = ops->create_ctrl(dev, opts);
if (IS_ERR(ctrl)) {
ret = PTR_ERR(ctrl);
- goto out_unlock;
+ goto out_module_put;
}
if (strcmp(ctrl->subsys->subnqn, opts->subsysnqn)) {
dev_warn(ctrl->device,
"controller returned incorrect NQN: \"%s\".\n",
ctrl->subsys->subnqn);
+ module_put(ops->module);
up_read(&nvmf_transports_rwsem);
nvme_delete_ctrl_sync(ctrl);
return ERR_PTR(-EINVAL);
}
+ module_put(ops->module);
up_read(&nvmf_transports_rwsem);
return ctrl;
+out_module_put:
+ module_put(ops->module);
out_unlock:
up_read(&nvmf_transports_rwsem);
out_free_opts:
--- a/drivers/nvme/host/fabrics.h
+++ b/drivers/nvme/host/fabrics.h
@@ -108,6 +108,7 @@ struct nvmf_ctrl_options {
* fabric implementation of NVMe fabrics.
* @entry: Used by the fabrics library to add the new
* registration entry to its linked-list internal tree.
+ * @module: Transport module reference
* @name: Name of the NVMe fabric driver implementation.
* @required_opts: sysfs command-line options that must be specified
* when adding a new NVMe controller.
@@ -126,6 +127,7 @@ struct nvmf_ctrl_options {
*/
struct nvmf_transport_ops {
struct list_head entry;
+ struct module *module;
const char *name;
int required_opts;
int allowed_opts;
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -3380,6 +3380,7 @@ nvme_fc_create_ctrl(struct device *dev,
static struct nvmf_transport_ops nvme_fc_transport = {
.name = "fc",
+ .module = THIS_MODULE,
.required_opts = NVMF_OPT_TRADDR | NVMF_OPT_HOST_TRADDR,
.allowed_opts = NVMF_OPT_RECONNECT_DELAY | NVMF_OPT_CTRL_LOSS_TMO,
.create_ctrl = nvme_fc_create_ctrl,
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -2018,6 +2018,7 @@ out_free_ctrl:
static struct nvmf_transport_ops nvme_rdma_transport = {
.name = "rdma",
+ .module = THIS_MODULE,
.required_opts = NVMF_OPT_TRADDR,
.allowed_opts = NVMF_OPT_TRSVCID | NVMF_OPT_RECONNECT_DELAY |
NVMF_OPT_HOST_TRADDR | NVMF_OPT_CTRL_LOSS_TMO,
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -686,6 +686,7 @@ static struct nvmet_fabrics_ops nvme_loo
static struct nvmf_transport_ops nvme_loop_transport = {
.name = "loop",
+ .module = THIS_MODULE,
.create_ctrl = nvme_loop_create_ctrl,
};
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tang Junhui <[email protected]>
[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ]
Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.
Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.
[edit by mlyle: commit log spelling/formatting]
Signed-off-by: Tang Junhui <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Signed-off-by: Michael Lyle <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/super.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -906,6 +906,12 @@ static void cached_dev_detach_finish(str
mutex_lock(&bch_register_lock);
+ cancel_delayed_work_sync(&dc->writeback_rate_update);
+ if (!IS_ERR_OR_NULL(dc->writeback_thread)) {
+ kthread_stop(dc->writeback_thread);
+ dc->writeback_thread = NULL;
+ }
+
memset(&dc->sb.set_uuid, 0, 16);
SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jian Shen <[email protected]>
[ Upstream commit d2a5dca8404871be683c6bbc175ebf9c56dd2865 ]
The dropped tx/rx packets number of each tqp should also
be counted into the total drop tx/rx packets numbers.
Fixes: 76ad4f0ee74 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -1055,6 +1055,8 @@ hns3_nic_get_stats64(struct net_device *
u64 rx_bytes = 0;
u64 tx_pkts = 0;
u64 rx_pkts = 0;
+ u64 tx_drop = 0;
+ u64 rx_drop = 0;
for (idx = 0; idx < queue_num; idx++) {
/* fetch the tx stats */
@@ -1063,6 +1065,8 @@ hns3_nic_get_stats64(struct net_device *
start = u64_stats_fetch_begin_irq(&ring->syncp);
tx_bytes += ring->stats.tx_bytes;
tx_pkts += ring->stats.tx_pkts;
+ tx_drop += ring->stats.tx_busy;
+ tx_drop += ring->stats.sw_err_cnt;
} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
/* fetch the rx stats */
@@ -1071,6 +1075,9 @@ hns3_nic_get_stats64(struct net_device *
start = u64_stats_fetch_begin_irq(&ring->syncp);
rx_bytes += ring->stats.rx_bytes;
rx_pkts += ring->stats.rx_pkts;
+ rx_drop += ring->stats.non_vld_descs;
+ rx_drop += ring->stats.err_pkt_len;
+ rx_drop += ring->stats.l2_err;
} while (u64_stats_fetch_retry_irq(&ring->syncp, start));
}
@@ -1086,8 +1093,8 @@ hns3_nic_get_stats64(struct net_device *
stats->rx_missed_errors = netdev->stats.rx_missed_errors;
stats->tx_errors = netdev->stats.tx_errors;
- stats->rx_dropped = netdev->stats.rx_dropped;
- stats->tx_dropped = netdev->stats.tx_dropped;
+ stats->rx_dropped = rx_drop + netdev->stats.rx_dropped;
+ stats->tx_dropped = tx_drop + netdev->stats.tx_dropped;
stats->collisions = netdev->stats.collisions;
stats->rx_over_errors = netdev->stats.rx_over_errors;
stats->rx_frame_errors = netdev->stats.rx_frame_errors;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fuyun Liang <[email protected]>
[ Upstream commit 5bad95a1e55f4d5bb41e130db859d57eaf1b1549 ]
when changing MTU, The new MTU must need to be set to netdevice.
Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware")
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -1324,6 +1324,8 @@ static int hns3_nic_change_mtu(struct ne
return ret;
}
+ netdev->mtu = new_mtu;
+
/* if the netdev was running earlier, bring it up again */
if (if_running && hns3_nic_net_open(netdev))
ret = -EINVAL;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Jurgens <[email protected]>
[ Upstream commit 734dc065fc41f6143ff88225aa5d335cb1e0f6aa ]
There are two potential problems with the existing implementation.
1. Enable and disable can race after the atomic operations.
2. If a command fails the refcount is left in an inconsistent state.
Introduce a lock and perform error checking.
Fixes: a6f7d2aff623 ("net/mlx5: Add support for multiple RoCE enable")
Signed-off-by: Daniel Jurgens <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/vport.c | 33 +++++++++++++++++++-----
include/linux/mlx5/driver.h | 2 -
2 files changed, 28 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
@@ -36,6 +36,9 @@
#include <linux/mlx5/vport.h>
#include "mlx5_core.h"
+/* Mutex to hold while enabling or disabling RoCE */
+static DEFINE_MUTEX(mlx5_roce_en_lock);
+
static int _mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod,
u16 vport, u32 *out, int outlen)
{
@@ -998,17 +1001,35 @@ static int mlx5_nic_vport_update_roce_st
int mlx5_nic_vport_enable_roce(struct mlx5_core_dev *mdev)
{
- if (atomic_inc_return(&mdev->roce.roce_en) != 1)
- return 0;
- return mlx5_nic_vport_update_roce_state(mdev, MLX5_VPORT_ROCE_ENABLED);
+ int err = 0;
+
+ mutex_lock(&mlx5_roce_en_lock);
+ if (!mdev->roce.roce_en)
+ err = mlx5_nic_vport_update_roce_state(mdev, MLX5_VPORT_ROCE_ENABLED);
+
+ if (!err)
+ mdev->roce.roce_en++;
+ mutex_unlock(&mlx5_roce_en_lock);
+
+ return err;
}
EXPORT_SYMBOL_GPL(mlx5_nic_vport_enable_roce);
int mlx5_nic_vport_disable_roce(struct mlx5_core_dev *mdev)
{
- if (atomic_dec_return(&mdev->roce.roce_en) != 0)
- return 0;
- return mlx5_nic_vport_update_roce_state(mdev, MLX5_VPORT_ROCE_DISABLED);
+ int err = 0;
+
+ mutex_lock(&mlx5_roce_en_lock);
+ if (mdev->roce.roce_en) {
+ mdev->roce.roce_en--;
+ if (mdev->roce.roce_en == 0)
+ err = mlx5_nic_vport_update_roce_state(mdev, MLX5_VPORT_ROCE_DISABLED);
+
+ if (err)
+ mdev->roce.roce_en++;
+ }
+ mutex_unlock(&mlx5_roce_en_lock);
+ return err;
}
EXPORT_SYMBOL_GPL(mlx5_nic_vport_disable_roce);
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -826,7 +826,7 @@ struct mlx5_core_dev {
struct mlx5e_resources mlx5e_res;
struct {
struct mlx5_rsvd_gids reserved_gids;
- atomic_t roce_en;
+ u32 roce_en;
} roce;
#ifdef CONFIG_MLX5_FPGA
struct mlx5_fpga_device *fpga;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
[ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ]
Currently the less than zero error check on ret is incorrect
as it is checking a far earlier ret assignment rather than the
return from the call to wl1251_acx_arp_ip_filter. Fix this by
adding in the missing assginment.
Detected by CoverityScan, CID#1164835 ("Logically dead code")
Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ti/wl1251/main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1200,8 +1200,7 @@ static void wl1251_op_bss_info_changed(s
WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc;
- wl1251_acx_arp_ip_filter(wl, enable, addr);
-
+ ret = wl1251_acx_arp_ip_filter(wl, enable, addr);
if (ret < 0)
goto out_sleep;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Martinez Canillas <[email protected]>
[ Upstream commit 095531f891e627e408606f2da4008d3d53e6748a ]
According to the TPM Library Specification, a TPM device must do a command
header validation before processing and return a TPM_RC_COMMAND_CODE code
if the command is not implemented.
So user-space will expect to handle that response as an error. But if the
in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is
returned instead if the command isn't implemented. This confuses userspace
since it doesn't expect that error value.
This also isn't consistent with the behavior when not using TPM spaces and
accessing the TPM directly (/dev/tpm?). In this case, the command is sent
to the TPM even when not implemented and the TPM responds with an error.
Instead of returning an -EINVAL errno code when the tpm_validate_command()
function fails, synthesize a TPM command response so user-space can get a
TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command.
The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and
TAB specifications define that higher layers in the stack should use some
of the unused 20 bits to specify from which level of the stack the error
is coming from.
Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource
manager, set the error level to the TAB/RM layer so user-space is aware of
this.
Suggested-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: William Roberts <[email protected]>
Reviewed-by: Philip Tricca <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm-interface.c | 28 ++++++++++++++++++++--------
drivers/char/tpm/tpm.h | 5 +++++
2 files changed, 25 insertions(+), 8 deletions(-)
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -328,7 +328,7 @@ unsigned long tpm_calc_ordinal_duration(
}
EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
-static bool tpm_validate_command(struct tpm_chip *chip,
+static int tpm_validate_command(struct tpm_chip *chip,
struct tpm_space *space,
const u8 *cmd,
size_t len)
@@ -340,10 +340,10 @@ static bool tpm_validate_command(struct
unsigned int nr_handles;
if (len < TPM_HEADER_SIZE)
- return false;
+ return -EINVAL;
if (!space)
- return true;
+ return 0;
if (chip->flags & TPM_CHIP_FLAG_TPM2 && chip->nr_commands) {
cc = be32_to_cpu(header->ordinal);
@@ -352,7 +352,7 @@ static bool tpm_validate_command(struct
if (i < 0) {
dev_dbg(&chip->dev, "0x%04X is an invalid command\n",
cc);
- return false;
+ return -EOPNOTSUPP;
}
attrs = chip->cc_attrs_tbl[i];
@@ -362,11 +362,11 @@ static bool tpm_validate_command(struct
goto err_len;
}
- return true;
+ return 0;
err_len:
dev_dbg(&chip->dev,
"%s: insufficient command length %zu", __func__, len);
- return false;
+ return -EINVAL;
}
/**
@@ -391,8 +391,20 @@ ssize_t tpm_transmit(struct tpm_chip *ch
unsigned long stop;
bool need_locality;
- if (!tpm_validate_command(chip, space, buf, bufsiz))
- return -EINVAL;
+ rc = tpm_validate_command(chip, space, buf, bufsiz);
+ if (rc == -EINVAL)
+ return rc;
+ /*
+ * If the command is not implemented by the TPM, synthesize a
+ * response with a TPM2_RC_COMMAND_CODE return for user-space.
+ */
+ if (rc == -EOPNOTSUPP) {
+ header->length = cpu_to_be32(sizeof(*header));
+ header->tag = cpu_to_be16(TPM2_ST_NO_SESSIONS);
+ header->return_code = cpu_to_be32(TPM2_RC_COMMAND_CODE |
+ TSS2_RESMGR_TPM_RC_LAYER);
+ return bufsiz;
+ }
if (bufsiz > TPM_BUFSIZE)
bufsiz = TPM_BUFSIZE;
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -93,12 +93,17 @@ enum tpm2_structures {
TPM2_ST_SESSIONS = 0x8002,
};
+/* Indicates from what layer of the software stack the error comes from */
+#define TSS2_RC_LAYER_SHIFT 16
+#define TSS2_RESMGR_TPM_RC_LAYER (11 << TSS2_RC_LAYER_SHIFT)
+
enum tpm2_return_codes {
TPM2_RC_SUCCESS = 0x0000,
TPM2_RC_HASH = 0x0083, /* RC_FMT1 */
TPM2_RC_HANDLE = 0x008B,
TPM2_RC_INITIALIZE = 0x0100, /* RC_VER1 */
TPM2_RC_DISABLED = 0x0120,
+ TPM2_RC_COMMAND_CODE = 0x0143,
TPM2_RC_TESTING = 0x090A, /* RC_WARN */
TPM2_RC_REFERENCE_H0 = 0x0910,
};
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <[email protected]>
[ Upstream commit 6dd80efd75ce7c2dbd9f117cf585ee2b33a42ee1 ]
Pausing queue without checking threshold is racy with txdone path.
Moreover we do not need pause queue on any error, but only if queue
is full - in case when we send RTS frame ( other cases of almost full
queue are already handled in rt2x00queue_write_tx_frame() ).
Patch fixes of theoretically possible problem of pausing empty
queue.
Signed-off-by: Stanislaw Gruszka <[email protected]>
Tested-by: Enrico Mioso <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
@@ -142,15 +142,25 @@ void rt2x00mac_tx(struct ieee80211_hw *h
if (!rt2x00dev->ops->hw->set_rts_threshold &&
(tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
IEEE80211_TX_RC_USE_CTS_PROTECT))) {
- if (rt2x00queue_available(queue) <= 1)
- goto exit_fail;
+ if (rt2x00queue_available(queue) <= 1) {
+ /*
+ * Recheck for full queue under lock to avoid race
+ * conditions with rt2x00lib_txdone().
+ */
+ spin_lock(&queue->tx_lock);
+ if (rt2x00queue_threshold(queue))
+ rt2x00queue_pause_queue(queue);
+ spin_unlock(&queue->tx_lock);
+
+ goto exit_free_skb;
+ }
if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
- goto exit_fail;
+ goto exit_free_skb;
}
if (unlikely(rt2x00queue_write_tx_frame(queue, skb, control->sta, false)))
- goto exit_fail;
+ goto exit_free_skb;
/*
* Pausing queue has to be serialized with rt2x00lib_txdone(). Note
@@ -164,10 +174,6 @@ void rt2x00mac_tx(struct ieee80211_hw *h
return;
- exit_fail:
- spin_lock(&queue->tx_lock);
- rt2x00queue_pause_queue(queue);
- spin_unlock(&queue->tx_lock);
exit_free_skb:
ieee80211_free_txskb(hw, skb);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit 165c2357744e41391902a2a72dd170beb60c28d5 ]
Properly stop any work we may have queued on probe-errors / remove.
Rather then adding a remove driver callback for this, and goto style
error handling to probe, use a devm_action for this.
The devm_action gets registered before we register any of the extcon
notifiers which may queue the work, devm does cleanup in reverse order,
so this ensures that the notifiers are removed before we cancel the work.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/axp288_charger.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -785,6 +785,14 @@ static int charger_init_hw_regs(struct a
return 0;
}
+static void axp288_charger_cancel_work(void *data)
+{
+ struct axp288_chrg_info *info = data;
+
+ cancel_work_sync(&info->otg.work);
+ cancel_work_sync(&info->cable.work);
+}
+
static int axp288_charger_probe(struct platform_device *pdev)
{
int ret, i, pirq;
@@ -836,6 +844,11 @@ static int axp288_charger_probe(struct p
return ret;
}
+ /* Cancel our work on cleanup, register this before the notifiers */
+ ret = devm_add_action(dev, axp288_charger_cancel_work, info);
+ if (ret)
+ return ret;
+
/* Register for extcon notification */
INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
info->cable.nb[0].notifier_call = axp288_charger_handle_cable0_evt;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
[ Upstream commit fb350e0ad99359768e1e80b4784692031ec340e4 ]
In both elevator_switch_mq() and blk_mq_update_nr_hw_queues(), sched tags
can be allocated, and q->nr_hw_queue is used, and race is inevitable, for
example: blk_mq_init_sched() may trigger use-after-free on hctx, which is
freed in blk_mq_realloc_hw_ctxs() when nr_hw_queues is decreased.
This patch fixes the race be holding q->sysfs_lock.
Reviewed-by: Christoph Hellwig <[email protected]>
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-mq.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2388,6 +2388,9 @@ static void blk_mq_realloc_hw_ctxs(struc
struct blk_mq_hw_ctx **hctxs = q->queue_hw_ctx;
blk_mq_sysfs_unregister(q);
+
+ /* protect against switching io scheduler */
+ mutex_lock(&q->sysfs_lock);
for (i = 0; i < set->nr_hw_queues; i++) {
int node;
@@ -2432,6 +2435,7 @@ static void blk_mq_realloc_hw_ctxs(struc
}
}
q->nr_hw_queues = i;
+ mutex_unlock(&q->sysfs_lock);
blk_mq_sysfs_register(q);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit dbeccabf5294e80f7cc9ee566746c42211bed736 ]
Calling smp_processor_id() without disabling preemption
triggers a warning (if CONFIG_DEBUG_PREEMPT).
I think the result of cfs_cpt_current() is only used as a hint for
load balancing, rather than as a precise and stable indicator of
the current CPU. So it doesn't need to be called with
preemption disabled.
So disable preemption inside cfs_cpt_current() to silence the warning.
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Andreas Dilger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c
+++ b/drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c
@@ -529,19 +529,20 @@ EXPORT_SYMBOL(cfs_cpt_spread_node);
int
cfs_cpt_current(struct cfs_cpt_table *cptab, int remap)
{
- int cpu = smp_processor_id();
- int cpt = cptab->ctb_cpu2cpt[cpu];
+ int cpu;
+ int cpt;
- if (cpt < 0) {
- if (!remap)
- return cpt;
+ preempt_disable();
+ cpu = smp_processor_id();
+ cpt = cptab->ctb_cpu2cpt[cpu];
+ if (cpt < 0 && remap) {
/* don't return negative value for safety of upper layer,
* instead we shadow the unknown cpu to a valid partition ID
*/
cpt = cpu % cptab->ctb_nparts;
}
-
+ preempt_enable();
return cpt;
}
EXPORT_SYMBOL(cfs_cpt_current);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej Purski <[email protected]>
[ Upstream commit 5d389b125186cf254ad5b8015763ac07c151aea4 ]
Calibration register is used for calculating current register in
hardware according to datasheet:
current = shunt_volt * calib_register / 2048 (ina 226)
current = shunt_volt * calib_register / 4096 (ina 219)
Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in
order to avoid truncation error and provide best precision allowed
by shunt_voltage measurement. Make current scale value follow changes
of shunt_resistor from sysfs as calib_register value is now fixed.
Power_lsb value should also follow shunt_resistor changes as stated in
datasheet:
power_lsb = 25 * current_lsb (ina 226)
power_lsb = 20 * current_lsb (ina 219)
Signed-off-by: Maciej Purski <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/ina2xx.c | 87 ++++++++++++++++++++++++++++---------------------
1 file changed, 50 insertions(+), 37 deletions(-)
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -95,18 +95,20 @@ enum ina2xx_ids { ina219, ina226 };
struct ina2xx_config {
u16 config_default;
- int calibration_factor;
+ int calibration_value;
int registers;
int shunt_div;
int bus_voltage_shift;
int bus_voltage_lsb; /* uV */
- int power_lsb; /* uW */
+ int power_lsb_factor;
};
struct ina2xx_data {
const struct ina2xx_config *config;
long rshunt;
+ long current_lsb_uA;
+ long power_lsb_uW;
struct mutex config_lock;
struct regmap *regmap;
@@ -116,21 +118,21 @@ struct ina2xx_data {
static const struct ina2xx_config ina2xx_config[] = {
[ina219] = {
.config_default = INA219_CONFIG_DEFAULT,
- .calibration_factor = 40960000,
+ .calibration_value = 4096,
.registers = INA219_REGISTERS,
.shunt_div = 100,
.bus_voltage_shift = 3,
.bus_voltage_lsb = 4000,
- .power_lsb = 20000,
+ .power_lsb_factor = 20,
},
[ina226] = {
.config_default = INA226_CONFIG_DEFAULT,
- .calibration_factor = 5120000,
+ .calibration_value = 2048,
.registers = INA226_REGISTERS,
.shunt_div = 400,
.bus_voltage_shift = 0,
.bus_voltage_lsb = 1250,
- .power_lsb = 25000,
+ .power_lsb_factor = 25,
},
};
@@ -169,12 +171,16 @@ static u16 ina226_interval_to_reg(int in
return INA226_SHIFT_AVG(avg_bits);
}
+/*
+ * Calibration register is set to the best value, which eliminates
+ * truncation errors on calculating current register in hardware.
+ * According to datasheet (eq. 3) the best values are 2048 for
+ * ina226 and 4096 for ina219. They are hardcoded as calibration_value.
+ */
static int ina2xx_calibrate(struct ina2xx_data *data)
{
- u16 val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
- data->rshunt);
-
- return regmap_write(data->regmap, INA2XX_CALIBRATION, val);
+ return regmap_write(data->regmap, INA2XX_CALIBRATION,
+ data->config->calibration_value);
}
/*
@@ -187,10 +193,6 @@ static int ina2xx_init(struct ina2xx_dat
if (ret < 0)
return ret;
- /*
- * Set current LSB to 1mA, shunt is in uOhms
- * (equation 13 in datasheet).
- */
return ina2xx_calibrate(data);
}
@@ -268,15 +270,15 @@ static int ina2xx_get_value(struct ina2x
val = DIV_ROUND_CLOSEST(val, 1000);
break;
case INA2XX_POWER:
- val = regval * data->config->power_lsb;
+ val = regval * data->power_lsb_uW;
break;
case INA2XX_CURRENT:
- /* signed register, LSB=1mA (selected), in mA */
- val = (s16)regval;
+ /* signed register, result in mA */
+ val = regval * data->current_lsb_uA;
+ val = DIV_ROUND_CLOSEST(val, 1000);
break;
case INA2XX_CALIBRATION:
- val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
- regval);
+ val = regval;
break;
default:
/* programmer goofed */
@@ -304,9 +306,32 @@ static ssize_t ina2xx_show_value(struct
ina2xx_get_value(data, attr->index, regval));
}
-static ssize_t ina2xx_set_shunt(struct device *dev,
- struct device_attribute *da,
- const char *buf, size_t count)
+/*
+ * In order to keep calibration register value fixed, the product
+ * of current_lsb and shunt_resistor should also be fixed and equal
+ * to shunt_voltage_lsb = 1 / shunt_div multiplied by 10^9 in order
+ * to keep the scale.
+ */
+static int ina2xx_set_shunt(struct ina2xx_data *data, long val)
+{
+ unsigned int dividend = DIV_ROUND_CLOSEST(1000000000,
+ data->config->shunt_div);
+ if (val <= 0 || val > dividend)
+ return -EINVAL;
+
+ mutex_lock(&data->config_lock);
+ data->rshunt = val;
+ data->current_lsb_uA = DIV_ROUND_CLOSEST(dividend, val);
+ data->power_lsb_uW = data->config->power_lsb_factor *
+ data->current_lsb_uA;
+ mutex_unlock(&data->config_lock);
+
+ return 0;
+}
+
+static ssize_t ina2xx_store_shunt(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
{
unsigned long val;
int status;
@@ -316,18 +341,9 @@ static ssize_t ina2xx_set_shunt(struct d
if (status < 0)
return status;
- if (val == 0 ||
- /* Values greater than the calibration factor make no sense. */
- val > data->config->calibration_factor)
- return -EINVAL;
-
- mutex_lock(&data->config_lock);
- data->rshunt = val;
- status = ina2xx_calibrate(data);
- mutex_unlock(&data->config_lock);
+ status = ina2xx_set_shunt(data, val);
if (status < 0)
return status;
-
return count;
}
@@ -387,7 +403,7 @@ static SENSOR_DEVICE_ATTR(power1_input,
/* shunt resistance */
static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
- ina2xx_show_value, ina2xx_set_shunt,
+ ina2xx_show_value, ina2xx_store_shunt,
INA2XX_CALIBRATION);
/* update interval (ina226 only) */
@@ -448,10 +464,7 @@ static int ina2xx_probe(struct i2c_clien
val = INA2XX_RSHUNT_DEFAULT;
}
- if (val <= 0 || val > data->config->calibration_factor)
- return -ENODEV;
-
- data->rshunt = val;
+ ina2xx_set_shunt(data, val);
ina2xx_regmap_config.max_register = data->config->registers;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robert Jarzmik <[email protected]>
[ Upstream commit 2023b0524a6310e9ea80daf085f51c71bff9289f ]
Currently the LCD display (TD035S) on the cm-x300 platform is broken and
remains blank.
The TD0245S specification requires that the chipselect is toggled
between commands sent to the panel. This was also the purpose of the
former patch of commit f64dcac0b124 ("backlight: tdo24m: ensure chip
select changes between transfers").
Unfortunately, the "cs_change" field of a SPI transfer is
misleading. Its true meaning is that for a SPI message holding multiple
transfers, the chip select is toggled between each transfer, but for the
last transfer it remains asserted.
In this driver, all the SPI messages contain exactly one transfer, which
means that each transfer is the last of its message, and as a
consequence the chip select is never toggled.
Actually, there was a second bug hidding the first one, hence the
problem was not seen until v4.6. This problem was fixed by commit
a52db659c79c ("spi: pxa2xx: Fix cs_change management") for PXA based
boards.
This fix makes the TD035S work again on a cm-x300 board. The same
applies to other PXA boards, ie. corgi and tosa.
Fixes: a52db659c79c ("spi: pxa2xx: Fix cs_change management")
Reported-by: Andrea Adami <[email protected]>
Signed-off-by: Robert Jarzmik <[email protected]>
Acked-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/backlight/corgi_lcd.c | 2 +-
drivers/video/backlight/tdo24m.c | 2 +-
drivers/video/backlight/tosa_lcd.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -177,7 +177,7 @@ static int corgi_ssp_lcdtg_send(struct c
struct spi_message msg;
struct spi_transfer xfer = {
.len = 1,
- .cs_change = 1,
+ .cs_change = 0,
.tx_buf = lcd->buf,
};
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -369,7 +369,7 @@ static int tdo24m_probe(struct spi_devic
spi_message_init(m);
- x->cs_change = 1;
+ x->cs_change = 0;
x->tx_buf = &lcd->buf[0];
spi_message_add_tail(x, m);
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -49,7 +49,7 @@ static int tosa_tg_send(struct spi_devic
struct spi_message msg;
struct spi_transfer xfer = {
.len = 1,
- .cs_change = 1,
+ .cs_change = 0,
.tx_buf = buf,
};
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 89434c3c35081439627baa2225622d5bd12242fe ]
When using RX (with or without TX), the DMA interrupt triggers
completion when the RX FIFO has been emptied, i.e. after the full
transfer has finished.
However, when using TX without RX, the DMA interrupt triggers completion
as soon as the DMA engine has filled the TX FIFO, i.e. before the full
transfer has finished. Then sh_msiof_modify_ctr_wait() will spin until
the transfer has really finished and the TFSE bit is cleared, for at
most 1 ms. For slow speeds and/or large transfers, this may cause
timeouts and transfer failures:
spi_sh_msiof e6e10000.spi: failed to shut down hardware
74x164 spi2.0: SPI transfer failed: -110
spi_master spi2: failed to transfer one message from queue
74x164 spi2.0: Failed writing: -110
Fix this by waiting explicitly until the TX FIFO has been emptied.
Based on a patch in the BSP by Hiromitsu Yamasaki.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-sh-msiof.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -797,11 +797,21 @@ static int sh_msiof_dma_once(struct sh_m
goto stop_dma;
}
- /* wait for tx fifo to be emptied / rx fifo to be filled */
+ /* wait for tx/rx DMA completion */
ret = sh_msiof_wait_for_completion(p);
if (ret)
goto stop_reset;
+ if (!rx) {
+ reinit_completion(&p->done);
+ sh_msiof_write(p, IER, IER_TEOFE);
+
+ /* wait for tx fifo to be emptied */
+ ret = sh_msiof_wait_for_completion(p);
+ if (ret)
+ goto stop_reset;
+ }
+
/* clear status bits */
sh_msiof_reset_str(p);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: oulijun <[email protected]>
[ Upstream commit 4f3f7a704b3bff9e4eb322ab3c989b505f7562eb ]
This patch fixes the usage with sr_max filed and rr_max of qp
context when modify qp. Its modifications include:
1. Adjust location of filling sr_max filed of qpc
2. Only assign the number of responder resource if
IB_QP_MAX_DEST_RD_ATOMIC bit is set
3. Only assign the number of outstanding resource if
IB_QP_MAX_QP_RD_ATOMIC
4. Fix the assgin algorithms for the field of sr_max
and rr_max of qp context
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Yixian Liu <[email protected]>
Signed-off-by: Wei Hu (Xavier) <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -2463,11 +2463,14 @@ static int modify_qp_init_to_rtr(struct
roce_set_bit(qpc_mask->byte_28_at_fl, V2_QPC_BYTE_28_LBI_S, 0);
}
- roce_set_field(context->byte_140_raq, V2_QPC_BYTE_140_RR_MAX_M,
- V2_QPC_BYTE_140_RR_MAX_S,
- ilog2((unsigned int)attr->max_dest_rd_atomic));
- roce_set_field(qpc_mask->byte_140_raq, V2_QPC_BYTE_140_RR_MAX_M,
- V2_QPC_BYTE_140_RR_MAX_S, 0);
+ if ((attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) &&
+ attr->max_dest_rd_atomic) {
+ roce_set_field(context->byte_140_raq, V2_QPC_BYTE_140_RR_MAX_M,
+ V2_QPC_BYTE_140_RR_MAX_S,
+ fls(attr->max_dest_rd_atomic - 1));
+ roce_set_field(qpc_mask->byte_140_raq, V2_QPC_BYTE_140_RR_MAX_M,
+ V2_QPC_BYTE_140_RR_MAX_S, 0);
+ }
roce_set_field(context->byte_56_dqpn_err, V2_QPC_BYTE_56_DQPN_M,
V2_QPC_BYTE_56_DQPN_S, attr->dest_qp_num);
@@ -2557,12 +2560,6 @@ static int modify_qp_init_to_rtr(struct
V2_QPC_BYTE_168_LP_SGEN_INI_M,
V2_QPC_BYTE_168_LP_SGEN_INI_S, 0);
- roce_set_field(context->byte_208_irrl, V2_QPC_BYTE_208_SR_MAX_M,
- V2_QPC_BYTE_208_SR_MAX_S,
- ilog2((unsigned int)attr->max_rd_atomic));
- roce_set_field(qpc_mask->byte_208_irrl, V2_QPC_BYTE_208_SR_MAX_M,
- V2_QPC_BYTE_208_SR_MAX_S, 0);
-
roce_set_field(context->byte_28_at_fl, V2_QPC_BYTE_28_SL_M,
V2_QPC_BYTE_28_SL_S, rdma_ah_get_sl(&attr->ah_attr));
roce_set_field(qpc_mask->byte_28_at_fl, V2_QPC_BYTE_28_SL_M,
@@ -2766,6 +2763,14 @@ static int modify_qp_rtr_to_rts(struct i
roce_set_field(qpc_mask->byte_196_sq_psn, V2_QPC_BYTE_196_SQ_MAX_PSN_M,
V2_QPC_BYTE_196_SQ_MAX_PSN_S, 0);
+ if ((attr_mask & IB_QP_MAX_QP_RD_ATOMIC) && attr->max_rd_atomic) {
+ roce_set_field(context->byte_208_irrl, V2_QPC_BYTE_208_SR_MAX_M,
+ V2_QPC_BYTE_208_SR_MAX_S,
+ fls(attr->max_rd_atomic - 1));
+ roce_set_field(qpc_mask->byte_208_irrl,
+ V2_QPC_BYTE_208_SR_MAX_M,
+ V2_QPC_BYTE_208_SR_MAX_S, 0);
+ }
return 0;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Archit Taneja <[email protected]>
[ Upstream commit 9dcfbc182f1aac0aa5ea194733d21e67dd2ba1fd ]
The msm/kms driver should work even if there is no GPU device specified
in DT. Currently, we get a NULL dereference crash in adreno_load_gpu
since the driver assumes that priv->gpu_pdev is non-NULL.
Perform an additional check on priv->gpu_pdev before trying to retrieve
the msm_gpu pointer from it.
v2: Incorporate Jordan's comments:
- Simplify the check to share the same error message.
- Use dev_err_once() to avoid an error message every time we open the
drm device fd.
Fixes: eec874ce5ff1 (drm/msm/adreno: load gpu at probe/bind time)
Signed-off-by: Archit Taneja <[email protected]>
Acked-by: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/adreno/adreno_device.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -125,11 +125,14 @@ struct msm_gpu *adreno_load_gpu(struct d
{
struct msm_drm_private *priv = dev->dev_private;
struct platform_device *pdev = priv->gpu_pdev;
- struct msm_gpu *gpu = platform_get_drvdata(priv->gpu_pdev);
+ struct msm_gpu *gpu = NULL;
int ret;
+ if (pdev)
+ gpu = platform_get_drvdata(pdev);
+
if (!gpu) {
- dev_err(dev->dev, "no adreno device\n");
+ dev_err_once(dev->dev, "no GPU device was found\n");
return NULL;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe JAILLET <[email protected]>
[ Upstream commit eaadb1caa966a91128297b754e90b7c92b350a00 ]
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/atom/sst/sst_stream.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/intel/atom/sst/sst_stream.c
+++ b/sound/soc/intel/atom/sst/sst_stream.c
@@ -220,7 +220,7 @@ int sst_send_byte_stream_mrfld(struct in
sst_free_block(sst_drv_ctx, block);
out:
test_and_clear_bit(pvt_id, &sst_drv_ctx->pvt_id);
- return 0;
+ return ret;
}
/*
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Estrin <[email protected]>
[ Upstream commit 809cb6955650d892c6ef95f1d55f28fceded0ce1 ]
If IB_CQ_REPORT_MISSED_EVENTS flag is passed in ib_req_notify_cq()
it may return positive value indicating non-empty CQ.
If return code not verified the log might be flooded with false
warning messages "request notify on send CQ failed".
Fixes: 8966e28d2e40 ("IB/ipoib: Use NAPI in UD/TX flows")
Reviewed-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Alex Estrin <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 10 ++++++----
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 2 +-
2 files changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -766,12 +766,14 @@ void ipoib_cm_send(struct net_device *de
skb_orphan(skb);
skb_dst_drop(skb);
- if (netif_queue_stopped(dev))
- if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP |
- IB_CQ_REPORT_MISSED_EVENTS)) {
+ if (netif_queue_stopped(dev)) {
+ rc = ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP |
+ IB_CQ_REPORT_MISSED_EVENTS);
+ if (unlikely(rc < 0))
ipoib_warn(priv, "IPoIB/CM:request notify on send CQ failed\n");
+ else if (rc)
napi_schedule(&priv->send_napi);
- }
+ }
rc = post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1), tx_req);
if (unlikely(rc)) {
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -644,7 +644,7 @@ int ipoib_send(struct net_device *dev, s
if (netif_queue_stopped(dev))
if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP |
- IB_CQ_REPORT_MISSED_EVENTS))
+ IB_CQ_REPORT_MISSED_EVENTS) < 0)
ipoib_warn(priv, "request notify on send CQ failed\n");
rc = post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
[ Upstream commit b70b309950418437bbd2a30afd169c4f09dee3e5 ]
Various Cherry Trail boards with a rt5645 codec have an analog mic
connected to IN2P + IN2N. The mic on this boards also needs micbias to
be enabled, on some boards micbias1 is used and on others micbias2, so
we enable both.
This commit adds a new "Int Analog Mic" DAPM widget for this, so that we
do not end up enabling micbias on boards with a digital mic which uses
the already present "Int Mic" widget. Some existing UCM files already
refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice,
but these don't work anyways since they enable the RECMIX BST1 Switch
instead of the BST2 switch.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/boards/cht_bsw_rt5645.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -118,6 +118,7 @@ static const struct snd_soc_dapm_widget
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_MIC("Int Analog Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
@@ -128,6 +129,8 @@ static const struct snd_soc_dapm_route c
{"IN1N", NULL, "Headset Mic"},
{"DMIC L1", NULL, "Int Mic"},
{"DMIC R1", NULL, "Int Mic"},
+ {"IN2P", NULL, "Int Analog Mic"},
+ {"IN2N", NULL, "Int Analog Mic"},
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
{"Ext Spk", NULL, "SPOL"},
@@ -135,6 +138,9 @@ static const struct snd_soc_dapm_route c
{"Headphone", NULL, "Platform Clock"},
{"Headset Mic", NULL, "Platform Clock"},
{"Int Mic", NULL, "Platform Clock"},
+ {"Int Analog Mic", NULL, "Platform Clock"},
+ {"Int Analog Mic", NULL, "micbias1"},
+ {"Int Analog Mic", NULL, "micbias2"},
{"Ext Spk", NULL, "Platform Clock"},
};
@@ -189,6 +195,7 @@ static const struct snd_kcontrol_new cht
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Int Mic"),
+ SOC_DAPM_PIN_SWITCH("Int Analog Mic"),
SOC_DAPM_PIN_SWITCH("Ext Spk"),
};
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit df93dc61b0d8b19a5c9db545cf3fcc24f88dfde4 ]
Currently, there's no check if an invalid buffer range
is passed. However, while testing DVB memory mapped apps,
I got this:
videobuf2_core: VB: num_buffers -2143943680, buffer 33, index -2143943647
unable to handle kernel paging request at ffff888b773c0890
IP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core]
PGD 4142c7067 P4D 4142c7067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc rc_dvbsky sp2 ts2020 intel_rapl x86_pkg_temp_thermal dvb_usb_dvbsky intel_powerclamp dvb_usb_v2 coretemp m88ds3103 kvm_intel i2c_mux dvb_core snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul videobuf2_vmalloc videobuf2_memops snd_hda_intel ghash_clmulni_intel videobuf2_core snd_hda_codec rc_core mei_me intel_cstate snd_hwdep snd_hda_core videodev intel_uncore snd_pcm mei media tpm_tis tpm_tis_core intel_rapl_perf tpm snd_timer lpc_ich snd soundcore kvm irqbypass libcrc32c i915 i2c_algo_bit drm_kms_helper
e1000e ptp drm crc32c_intel video pps_core
CPU: 3 PID: 1776 Comm: dvbv5-zap Not tainted 4.14.0+ #78
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
task: ffff88877c73bc80 task.stack: ffffb7c402418000
RIP: 0010:__vb2_queue_alloc+0x134/0x4e0 [videobuf2_core]
RSP: 0018:ffffb7c40241bc60 EFLAGS: 00010246
RAX: 0000000080360421 RBX: 0000000000000021 RCX: 000000000000000a
RDX: ffffb7c40241bcf4 RSI: ffff888780362c60 RDI: ffff888796d8e130
RBP: ffffb7c40241bcc8 R08: 0000000000000316 R09: 0000000000000004
R10: ffff888780362c00 R11: 0000000000000001 R12: 000000000002f000
R13: ffff8887758be700 R14: 0000000000021000 R15: 0000000000000001
FS: 00007f2849024740(0000) GS:ffff888796d80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888b773c0890 CR3: 000000043beb2005 CR4: 00000000003606e0
Call Trace:
vb2_core_reqbufs+0x226/0x420 [videobuf2_core]
dvb_vb2_reqbufs+0x2d/0xc0 [dvb_core]
dvb_dvr_do_ioctl+0x98/0x1d0 [dvb_core]
dvb_usercopy+0x53/0x1b0 [dvb_core]
? dvb_demux_ioctl+0x20/0x20 [dvb_core]
? tty_ldisc_deref+0x16/0x20
? tty_write+0x1f9/0x310
? process_echoes+0x70/0x70
dvb_dvr_ioctl+0x15/0x20 [dvb_core]
do_vfs_ioctl+0xa5/0x600
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa5
RIP: 0033:0x7f28486f7ea7
RSP: 002b:00007ffc13b2db18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055b10fc06130 RCX: 00007f28486f7ea7
RDX: 00007ffc13b2db48 RSI: 00000000c0086f3c RDI: 0000000000000007
RBP: 0000000000000203 R08: 000055b10df1e02c R09: 000000000000002e
R10: 0036b42415108357 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f2849062f60 R14: 00000000000001f1 R15: 00007ffc13b2da54
Code: 74 0a 60 8b 0a 48 83 c0 30 48 83 c2 04 89 48 d0 89 48 d4 48 39 f0 75 eb 41 8b 42 08 83 7d d4 01 41 c7 82 ec 01 00 00 ff ff ff ff <4d> 89 94 c5 88 00 00 00 74 14 83 c3 01 41 39 dc 0f 85 f1 fe ff
RIP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: ffffb7c40241bc60
CR2: ffff888b773c0890
So, add a sanity check in order to prevent going past array.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/videobuf2-core.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -332,6 +332,10 @@ static int __vb2_queue_alloc(struct vb2_
struct vb2_buffer *vb;
int ret;
+ /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */
+ num_buffers = min_t(unsigned int, num_buffers,
+ VB2_MAX_FRAME - q->num_buffers);
+
for (buffer = 0; buffer < num_buffers; ++buffer) {
/* Allocate videobuf buffer structures */
vb = kzalloc(q->buf_struct_size, GFP_KERNEL);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pardha Saradhi K <[email protected]>
[ Upstream commit d5cc0a1fcbb5ddbef9fdd4c4a978da3254ddbf37 ]
During firmware and library download, sometimes it is observed that
firmware and library download is timed-out resulting into probe failure.
This patch disables dynamic clock gating while firmware and library
download.
Signed-off-by: Pardha Saradhi K <[email protected]>
Signed-off-by: Sanyog Kale <[email protected]>
Signed-off-by: Guneshwor Singh <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/skylake/skl-messages.c | 4 ++++
sound/soc/intel/skylake/skl-pcm.c | 4 ++++
2 files changed, 8 insertions(+)
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -404,7 +404,11 @@ int skl_resume_dsp(struct skl *skl)
if (skl->skl_sst->is_first_boot == true)
return 0;
+ /* disable dynamic clock gating during fw and lib download */
+ ctx->enable_miscbdcge(ctx->dev, false);
+
ret = skl_dsp_wake(ctx->dsp);
+ ctx->enable_miscbdcge(ctx->dev, true);
if (ret < 0)
return ret;
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -1343,7 +1343,11 @@ static int skl_platform_soc_probe(struct
return -EIO;
}
+ /* disable dynamic clock gating during fw and lib download */
+ skl->skl_sst->enable_miscbdcge(platform->dev, false);
+
ret = ops->init_fw(platform->dev, skl->skl_sst);
+ skl->skl_sst->enable_miscbdcge(platform->dev, true);
if (ret < 0) {
dev_err(platform->dev, "Failed to boot first fw: %d\n", ret);
return ret;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
[ Upstream commit 24e78079bf2250874e33da2e7cfbb6db72d3caf4 ]
Some GPIO lines appear named "?" in the lsgpio dump due to their
requesting drivers not passing a reasonable label.
Most typically this happens if a device tree node just defines
gpios = <...> and not foo-gpios = <...>, the former gets named
"foo" and the latter gets named "?".
However the struct device passed in is always valid so let's
just label the GPIO with dev_name() on the device if no proper
label was passed.
Cc: Reported-by: Jason Kridner <[email protected]>
Reported-by: Jason Kridner <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpiolib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3647,7 +3647,8 @@ struct gpio_desc *__must_check gpiod_get
return desc;
}
- status = gpiod_request(desc, con_id);
+ /* If a connection label was passed use that, else use the device name as label */
+ status = gpiod_request(desc, con_id ? con_id : dev_name(dev));
if (status < 0)
return ERR_PTR(status);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Pieter \\\"PoroCYon\\\" Sluys" <[email protected]>
[ Upstream commit 7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ]
Currently, when loading the vfb module, the newly created fbdev
has a line_length of 0, and its video mode would be PSEUDOCOLOR
regardless of color depth. (The former could be worked around by
calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE
flag set.) This patch automatically sets the line_length correctly,
and the video mode is derived from the bit depth now as well.
Thanks to Geert Uytterhoeven for confirming the bug and helping me with
the patch.
Output of `fbset -i' before the patch:
mode "1366x768-60"
# D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
geometry 1366 768 1366 768 32
timings 13806 120 10 14 3 32 5
rgba 8/0,8/8,8/16,8/24
endmode
Frame buffer device information:
Name : Virtual FB
Address : 0xffffaa1405d85000
Size : 4196352
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 1
LineLength : 0 <-- note this
Accelerator : No
After:
mode "1366x768-60"
# D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz
geometry 1366 768 1366 768 32
timings 13806 120 10 14 3 32 5
rgba 8/0,8/8,8/16,8/24
endmode
Frame buffer device information:
Name : Virtual FB
Address : 0xffffaa1405d85000
Size : 4196352
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 1
LineLength : 5464
Accelerator : No
Signed-off-by: "Pieter \"PoroCYon\" Sluys" <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
[b.zolnierkie: minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/vfb.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/video/fbdev/vfb.c
+++ b/drivers/video/fbdev/vfb.c
@@ -239,8 +239,23 @@ static int vfb_check_var(struct fb_var_s
*/
static int vfb_set_par(struct fb_info *info)
{
+ switch (info->var.bits_per_pixel) {
+ case 1:
+ info->fix.visual = FB_VISUAL_MONO01;
+ break;
+ case 8:
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ case 16:
+ case 24:
+ case 32:
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+ }
+
info->fix.line_length = get_line_length(info->var.xres_virtual,
info->var.bits_per_pixel);
+
return 0;
}
@@ -450,6 +465,8 @@ static int vfb_probe(struct platform_dev
goto err2;
platform_set_drvdata(dev, info);
+ vfb_set_par(info);
+
fb_info(info, "Virtual frame buffer device, using %ldK of video memory\n",
videomemorysize >> 10);
return 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <[email protected]>
[ Upstream commit 404e6bea10662f0e142748353169d25378271e49 ]
In case of error, the function ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: 9b54470afd83 ("irqchip: add initial support for ompic")
Acked-by: Stafford Horne <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/irqchip/irq-ompic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/irqchip/irq-ompic.c
+++ b/drivers/irqchip/irq-ompic.c
@@ -171,9 +171,9 @@ static int __init ompic_of_init(struct d
/* Setup the device */
ompic_base = ioremap(res.start, resource_size(&res));
- if (IS_ERR(ompic_base)) {
+ if (!ompic_base) {
pr_err("ompic: unable to map registers");
- return PTR_ERR(ompic_base);
+ return -ENOMEM;
}
irq = irq_of_parse_and_map(node, 0);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafael David Tinoco <[email protected]>
[ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ]
If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.
PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
#0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
#1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
#2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
#3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
#4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
#5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
#6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
#7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
#8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
#9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c
This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.
Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.
Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.
After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.
Signed-off-by: Rafael David Tinoco <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libiscsi.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1696,6 +1696,15 @@ int iscsi_queuecommand(struct Scsi_Host
*/
switch (session->state) {
case ISCSI_STATE_FAILED:
+ /*
+ * cmds should fail during shutdown, if the session
+ * state is bad, allowing completion to happen
+ */
+ if (unlikely(system_state != SYSTEM_RUNNING)) {
+ reason = FAILURE_SESSION_FAILED;
+ sc->result = DID_NO_CONNECT << 16;
+ break;
+ }
case ISCSI_STATE_IN_RECOVERY:
reason = FAILURE_SESSION_IN_RECOVERY;
sc->result = DID_IMM_RETRY << 16;
@@ -1979,6 +1988,19 @@ enum blk_eh_timer_return iscsi_eh_cmd_ti
if (session->state != ISCSI_STATE_LOGGED_IN) {
/*
+ * During shutdown, if session is prematurely disconnected,
+ * recovery won't happen and there will be hung cmds. Not
+ * handling cmds would trigger EH, also bad in this case.
+ * Instead, handle cmd, allow completion to happen and let
+ * upper layer to deal with the result.
+ */
+ if (unlikely(system_state != SYSTEM_RUNNING)) {
+ sc->result = DID_NO_CONNECT << 16;
+ ISCSI_DBG_EH(session, "sc on shutdown, handled\n");
+ rc = BLK_EH_HANDLED;
+ goto done;
+ }
+ /*
* We are probably in the middle of iscsi recovery so let
* that complete and handle the error.
*/
@@ -2082,7 +2104,7 @@ done:
task->last_timeout = jiffies;
spin_unlock(&session->frwd_lock);
ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
- "timer reset" : "nh");
+ "timer reset" : "shutdown or nh");
return rc;
}
EXPORT_SYMBOL_GPL(iscsi_eh_cmd_timed_out);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 4b3a2716dd785fabb9f6ac80c1d53cb29a88169d ]
Commit d80406453ad4 ("perf symbols: Allow user probes on versioned
symbols") allows user to find default versioned symbols (with "@@") in
map. However, it did not enable normal versioned symbol (with "@") for
perf-probe. E.g.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state
Failed to find symbol malloc_get_state in /usr/lib64/libc-2.25.so
Error: Failed to add events.
=====
This solves above issue by improving perf-probe symbol search function,
as below.
=====
# ./perf probe -x /lib64/libc-2.25.so malloc_get_state
Added new event:
probe_libc:malloc_get_state (on malloc_get_state in /usr/lib64/libc-2.25.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc_get_state -aR sleep 1
# ./perf probe -l
probe_libc:malloc_get_state (on malloc_get_state@GLIBC_2.2.5 in /usr/lib64/libc-2.25.so)
=====
Signed-off-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Thomas Richter <[email protected]>
Acked-by: Ravi Bangoria <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: bhargavb <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/151275049269.24652.1639103455496216255.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/arch/powerpc/util/sym-handling.c | 8 ++++++++
tools/perf/util/probe-event.c | 20 ++++++++++++++++++--
tools/perf/util/symbol.c | 5 +++++
tools/perf/util/symbol.h | 1 +
4 files changed, 32 insertions(+), 2 deletions(-)
--- a/tools/perf/arch/powerpc/util/sym-handling.c
+++ b/tools/perf/arch/powerpc/util/sym-handling.c
@@ -64,6 +64,14 @@ int arch__compare_symbol_names_n(const c
return strncmp(namea, nameb, n);
}
+
+const char *arch__normalize_symbol_name(const char *name)
+{
+ /* Skip over initial dot */
+ if (name && *name == '.')
+ name++;
+ return name;
+}
#endif
#if defined(_CALL_ELF) && _CALL_ELF == 2
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -2792,16 +2792,32 @@ static int find_probe_functions(struct m
int found = 0;
struct symbol *sym;
struct rb_node *tmp;
+ const char *norm, *ver;
+ char *buf = NULL;
if (map__load(map) < 0)
return 0;
map__for_each_symbol(map, sym, tmp) {
- if (strglobmatch(sym->name, name)) {
+ norm = arch__normalize_symbol_name(sym->name);
+ if (!norm)
+ continue;
+
+ /* We don't care about default symbol or not */
+ ver = strchr(norm, '@');
+ if (ver) {
+ buf = strndup(norm, ver - norm);
+ if (!buf)
+ return -ENOMEM;
+ norm = buf;
+ }
+ if (strglobmatch(norm, name)) {
found++;
if (syms && found < probe_conf.max_probes)
syms[found - 1] = sym;
}
+ if (buf)
+ zfree(&buf);
}
return found;
@@ -2847,7 +2863,7 @@ static int find_probe_trace_events_from_
* same name but different addresses, this lists all the symbols.
*/
num_matched_functions = find_probe_functions(map, pp->function, syms);
- if (num_matched_functions == 0) {
+ if (num_matched_functions <= 0) {
pr_err("Failed to find symbol %s in %s\n", pp->function,
pev->target ? : "kernel");
ret = -ENOENT;
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -94,6 +94,11 @@ static int prefix_underscores_count(cons
return tail - str;
}
+const char * __weak arch__normalize_symbol_name(const char *name)
+{
+ return name;
+}
+
int __weak arch__compare_symbol_names(const char *namea, const char *nameb)
{
return strcmp(namea, nameb);
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -349,6 +349,7 @@ bool elf__needs_adjust_symbols(GElf_Ehdr
void arch__sym_update(struct symbol *s, GElf_Sym *sym);
#endif
+const char *arch__normalize_symbol_name(const char *name);
#define SYMBOL_A 0
#define SYMBOL_B 1
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Marciniszyn <[email protected]>
[ Upstream commit db9a2c6f9b6196b889b98e961cb9a37617b11ccf ]
CQ allocation does not ensure that completion queue entries
and the completion queue structure are allocated on the correct
numa node.
Fix by allocating the rvt_cq and kernel CQ entries on the device node,
leaving the user CQ entries on the default local node. Also ensure
CQ resizes use the correct allocator when extending a CQ.
Reviewed-by: Sebastian Sanchez <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rdmavt/cq.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/infiniband/sw/rdmavt/cq.c
+++ b/drivers/infiniband/sw/rdmavt/cq.c
@@ -198,7 +198,7 @@ struct ib_cq *rvt_create_cq(struct ib_de
return ERR_PTR(-EINVAL);
/* Allocate the completion queue structure. */
- cq = kzalloc(sizeof(*cq), GFP_KERNEL);
+ cq = kzalloc_node(sizeof(*cq), GFP_KERNEL, rdi->dparms.node);
if (!cq)
return ERR_PTR(-ENOMEM);
@@ -214,7 +214,9 @@ struct ib_cq *rvt_create_cq(struct ib_de
sz += sizeof(struct ib_uverbs_wc) * (entries + 1);
else
sz += sizeof(struct ib_wc) * (entries + 1);
- wc = vmalloc_user(sz);
+ wc = udata ?
+ vmalloc_user(sz) :
+ vzalloc_node(sz, rdi->dparms.node);
if (!wc) {
ret = ERR_PTR(-ENOMEM);
goto bail_cq;
@@ -369,7 +371,9 @@ int rvt_resize_cq(struct ib_cq *ibcq, in
sz += sizeof(struct ib_uverbs_wc) * (cqe + 1);
else
sz += sizeof(struct ib_wc) * (cqe + 1);
- wc = vmalloc_user(sz);
+ wc = udata ?
+ vmalloc_user(sz) :
+ vzalloc_node(sz, rdi->dparms.node);
if (!wc)
return -ENOMEM;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shanker Donthineni <[email protected]>
[ Upstream commit ebe2f8718007d5a1238bb3cb8141b5bb2b4d5773 ]
The ACPI specification says OS shouldn't attempt to use GICC configuration
parameters if the flag ACPI_MADT_ENABLED is cleared. The ARM64-SMP code
skips the disabled GICC entries but not causing any issue. However the
current GICv3 driver probe bails out causing kernel panic() instead of
skipping the disabled GICC interfaces. This issue happens on systems
where redistributor regions are not in the always-on power domain and
one of GICC interface marked with ACPI_MADT_ENABLED=0.
This patch does the two things to fix the panic.
- Don't return an error in gic_acpi_match_gicc() for disabled GICC entry.
- No need to keep GICR region information for disabled GICC entry.
Observed kernel crash on QDF2400 platform GICC entry is disabled.
Kernel crash traces:
Kernel panic - not syncing: No interrupt controller found.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.5 #26
[<ffff000008087770>] dump_backtrace+0x0/0x218
[<ffff0000080879dc>] show_stack+0x14/0x20
[<ffff00000883b078>] dump_stack+0x98/0xb8
[<ffff0000080c5c14>] panic+0x118/0x26c
[<ffff000008b62348>] init_IRQ+0x24/0x2c
[<ffff000008b609fc>] start_kernel+0x230/0x394
[<ffff000008b601e4>] __primary_switched+0x64/0x6c
---[ end Kernel panic - not syncing: No interrupt controller found.
Disabled GICC subtable example:
Subtable Type : 0B [Generic Interrupt Controller]
Length : 50
Reserved : 0000
CPU Interface Number : 0000003D
Processor UID : 0000003D
Flags (decoded below) : 00000000
Processor Enabled : 0
Performance Interrupt Trig Mode : 0
Virtual GIC Interrupt Trig Mode : 0
Parking Protocol Version : 00000000
Performance Interrupt : 00000017
Parked Address : 0000000000000000
Base Address : 0000000000000000
Virtual GIC Base Address : 0000000000000000
Hypervisor GIC Base Address : 0000000000000000
Virtual GIC Interrupt : 00000019
Redistributor Base Address : 0000FFFF88F40000
ARM MPIDR : 000000000000000D
Efficiency Class : 00
Reserved : 000000
Signed-off-by: Shanker Donthineni <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/irqchip/irq-gic-v3.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -1331,6 +1331,10 @@ gic_acpi_parse_madt_gicc(struct acpi_sub
u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2;
void __iomem *redist_base;
+ /* GICC entry which has !ACPI_MADT_ENABLED is not unusable so skip */
+ if (!(gicc->flags & ACPI_MADT_ENABLED))
+ return 0;
+
redist_base = ioremap(gicc->gicr_base_address, size);
if (!redist_base)
return -ENOMEM;
@@ -1380,6 +1384,13 @@ static int __init gic_acpi_match_gicc(st
if ((gicc->flags & ACPI_MADT_ENABLED) && gicc->gicr_base_address)
return 0;
+ /*
+ * It's perfectly valid firmware can pass disabled GICC entry, driver
+ * should not treat as errors, skip the entry instead of probe fail.
+ */
+ if (!(gicc->flags & ACPI_MADT_ENABLED))
+ return 0;
+
return -ENODEV;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fuyun Liang <[email protected]>
[ Upstream commit f16121c80c8ee4dab3c41363cb8b24f8d8eaf45f ]
commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature
initialization") adds default supported features for phy, but our hardware
also supports Asym Pause. This patch adds Asym Pause support to phy
default features to prevent Asym Pause can not be advertised when the phy
negotiates flow control.
Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization")
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -17,6 +17,7 @@
#define HCLGE_PHY_SUPPORTED_FEATURES (SUPPORTED_Autoneg | \
SUPPORTED_TP | \
SUPPORTED_Pause | \
+ SUPPORTED_Asym_Pause | \
PHY_10BT_FEATURES | \
PHY_100BT_FEATURES | \
PHY_1000BT_FEATURES)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
[ Upstream commit 820da5357572715c6235ba3b3daa2d5b43a1198f ]
Report offset parameter in L2TP_CMD_SESSION_GET command if
it has been configured by userspace
Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP")
Reported-by: Jianlin Shi <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_netlink.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -761,6 +761,8 @@ static int l2tp_nl_session_send(struct s
if ((session->ifname[0] &&
nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) ||
+ (session->offset &&
+ nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset)) ||
(session->cookie_len &&
nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len,
&session->cookie[0])) ||
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fuyun Liang <[email protected]>
[ Upstream commit 27b5bf49f0924fd62d2b1ef8467b40773973da34 ]
When phy exists, we use the value of phydev.autoneg to represent the
auto-negotiation state of hardware. Otherwise, we use the value of
mac.autoneg to represent it.
This patch fixes for getting a error value of auto-negotiation state in
hclge_get_autoneg().
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2189,6 +2189,10 @@ static int hclge_get_autoneg(struct hnae
{
struct hclge_vport *vport = hclge_get_vport(handle);
struct hclge_dev *hdev = vport->back;
+ struct phy_device *phydev = hdev->hw.mac.phydev;
+
+ if (phydev)
+ return phydev->autoneg;
hclge_query_autoneg_result(hdev);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mengting Zhang <[email protected]>
[ Upstream commit ca8000684ec4e66f965e1f9547a3c6cb834154ca ]
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
Here, the patch enables perf_evsel::ignore_missing_thread for -p option
to ignore complete failure if any of threads die before we open the event.
But it may still return sys_perf_event_open failure with 22(Invalid) if we
monitors several event groups.
sys_perf_event_open: pid 28960 cpu 40 group_fd 118202 flags 0x8
sys_perf_event_open: pid 28961 cpu 40 group_fd 118203 flags 0x8
WARNING: Ignored open failure for pid 28962
sys_perf_event_open: pid 28962 cpu 40 group_fd [118203] flags 0x8
sys_perf_event_open failed, error -22
That is because when we ignore a missing thread, we change the thread_idx
without dealing with its fds, FD(evsel, cpu, thread). Then get_group_fd()
may return a wrong group_fd for the next thread and sys_perf_event_open()
return with 22.
sys_perf_event_open(){
...
if (group_fd != -1)
perf_fget_light()//to get corresponding group_leader by group_fd
...
if (group_leader)
if (group_leader->ctx->task != ctx->task)//should on the same task
goto err_context
...
}
This patch also fixes this bug by introducing perf_evsel__remove_fd() and
update_fds to allow removing fds for the missing thread.
Changes since v1:
- Change group_fd__remove() into a more genetic way without changing code logic
- Remove redundant condition
Changes since v2:
- Use a proper function name and add some comment.
- Multiline comment style fixes.
Committer testing:
Before this patch the recently added 'perf stat --per-thread' for system
wide counting would race while enumerating all threads using /proc:
[root@jouet ~]# perf stat --per-thread
failed to parse CPUs map: No such file or directory
Usage: perf stat [<options>] [<command>]
-C, --cpu <cpu> list of cpus to monitor in system-wide
-a, --all-cpus system-wide collection from all CPUs
[root@jouet ~]# perf stat --per-thread
failed to parse CPUs map: No such file or directory
Usage: perf stat [<options>] [<command>]
-C, --cpu <cpu> list of cpus to monitor in system-wide
-a, --all-cpus system-wide collection from all CPUs
[root@jouet ~]#
When, say, the kernel was being built, so lots of shortlived threads,
after this patch this doesn't happen.
Signed-off-by: Mengting Zhang <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Cheng Jian <[email protected]>
Cc: Li Bin <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Remove one use 'evlist' alias variable ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/builtin-record.c | 4 +--
tools/perf/util/evsel.c | 47 ++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 47 insertions(+), 4 deletions(-)
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -1781,8 +1781,8 @@ int cmd_record(int argc, const char **ar
goto out;
}
- /* Enable ignoring missing threads when -u option is defined. */
- rec->opts.ignore_missing_thread = rec->opts.target.uid != UINT_MAX;
+ /* Enable ignoring missing threads when -u/-p option is defined. */
+ rec->opts.ignore_missing_thread = rec->opts.target.uid != UINT_MAX || rec->opts.target.pid;
err = -ENOMEM;
if (perf_evlist__create_maps(rec->evlist, &rec->opts.target) < 0)
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1597,10 +1597,46 @@ static int __open_attr__fprintf(FILE *fp
return fprintf(fp, " %-32s %s\n", name, val);
}
+static void perf_evsel__remove_fd(struct perf_evsel *pos,
+ int nr_cpus, int nr_threads,
+ int thread_idx)
+{
+ for (int cpu = 0; cpu < nr_cpus; cpu++)
+ for (int thread = thread_idx; thread < nr_threads - 1; thread++)
+ FD(pos, cpu, thread) = FD(pos, cpu, thread + 1);
+}
+
+static int update_fds(struct perf_evsel *evsel,
+ int nr_cpus, int cpu_idx,
+ int nr_threads, int thread_idx)
+{
+ struct perf_evsel *pos;
+
+ if (cpu_idx >= nr_cpus || thread_idx >= nr_threads)
+ return -EINVAL;
+
+ evlist__for_each_entry(evsel->evlist, pos) {
+ nr_cpus = pos != evsel ? nr_cpus : cpu_idx;
+
+ perf_evsel__remove_fd(pos, nr_cpus, nr_threads, thread_idx);
+
+ /*
+ * Since fds for next evsel has not been created,
+ * there is no need to iterate whole event list.
+ */
+ if (pos == evsel)
+ break;
+ }
+ return 0;
+}
+
static bool ignore_missing_thread(struct perf_evsel *evsel,
+ int nr_cpus, int cpu,
struct thread_map *threads,
int thread, int err)
{
+ pid_t ignore_pid = thread_map__pid(threads, thread);
+
if (!evsel->ignore_missing_thread)
return false;
@@ -1616,11 +1652,18 @@ static bool ignore_missing_thread(struct
if (threads->nr == 1)
return false;
+ /*
+ * We should remove fd for missing_thread first
+ * because thread_map__remove() will decrease threads->nr.
+ */
+ if (update_fds(evsel, nr_cpus, cpu, threads->nr, thread))
+ return false;
+
if (thread_map__remove(threads, thread))
return false;
pr_warning("WARNING: Ignored open failure for pid %d\n",
- thread_map__pid(threads, thread));
+ ignore_pid);
return true;
}
@@ -1725,7 +1768,7 @@ retry_open:
if (fd < 0) {
err = -errno;
- if (ignore_missing_thread(evsel, threads, thread, err)) {
+ if (ignore_missing_thread(evsel, cpus->nr, cpu, threads, thread, err)) {
/*
* We just removed 1 thread, so take a step
* back on thread index and lower the upper
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
[ Upstream commit e48e5e198fb6ec77c91047a694022f0fefa45292 ]
The commit 1a1c116f3dcf ("RDMA/netlink: Simplify the put_msg and put_attr")
removes nlmsg_len calculation in ibnl_put_attr causing netlink messages and
caused to miss source and destination addresses.
Fixes: 1a1c116f3dcf ("RDMA/netlink: Simplify the put_msg and put_attr")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/cma.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4449,6 +4449,7 @@ static int cma_get_id_stats(struct sk_bu
id_stats->qp_type = id->qp_type;
i_id++;
+ nlmsg_end(skb, nlh);
}
cb->args[1] = 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
[ Upstream commit f9d8adb345d7adbb2d3431eea73beb89c8d6d612 ]
When we detect a different endianity we swap event before processing.
It's tricky for samples because we have no idea what's inside. We treat
it as an array of u64s, swap them and later on we swap back parts which
are different.
We mangle this way also the tracepoint raw data, which ends up in report
showing wrong data:
1.95% comm=Q^B pid=29285 prio=16777216 target_cpu=000
1.67% comm=l^B pid=0 prio=16777216 target_cpu=000
Luckily the traceevent library handles the endianity by itself (thank
you Steven!), so we can pass the RAW data directly in the other
endianity.
2.51% comm=beah-rhts-task pid=1175 prio=120 target_cpu=002
2.23% comm=kworker/0:0 pid=11566 prio=120 target_cpu=000
The fix is basically to swap back the raw data if different endianity is
detected.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Add util/memswap.c to python-ext-sources to link missing mem_bswap_64() ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/evsel.c | 20 +++++++++++++++++---
tools/perf/util/python-ext-sources | 1 +
2 files changed, 18 insertions(+), 3 deletions(-)
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -36,6 +36,7 @@
#include "debug.h"
#include "trace-event.h"
#include "stat.h"
+#include "memswap.h"
#include "util/parse-branch-options.h"
#include "sane_ctype.h"
@@ -2120,14 +2121,27 @@ int perf_evsel__parse_sample(struct perf
if (type & PERF_SAMPLE_RAW) {
OVERFLOW_CHECK_u64(array);
u.val64 = *array;
- if (WARN_ONCE(swapped,
- "Endianness of raw data not corrected!\n")) {
- /* undo swap of u64, then swap on individual u32s */
+
+ /*
+ * Undo swap of u64, then swap on individual u32s,
+ * get the size of the raw area and undo all of the
+ * swap. The pevent interface handles endianity by
+ * itself.
+ */
+ if (swapped) {
u.val64 = bswap_64(u.val64);
u.val32[0] = bswap_32(u.val32[0]);
u.val32[1] = bswap_32(u.val32[1]);
}
data->raw_size = u.val32[0];
+
+ /*
+ * The raw data is aligned on 64bits including the
+ * u32 size, so it's safe to use mem_bswap_64.
+ */
+ if (swapped)
+ mem_bswap_64((void *) array, data->raw_size);
+
array = (void *)array + sizeof(u32);
OVERFLOW_CHECK(array, data->raw_size, max_size);
--- a/tools/perf/util/python-ext-sources
+++ b/tools/perf/util/python-ext-sources
@@ -10,6 +10,7 @@ util/ctype.c
util/evlist.c
util/evsel.c
util/cpumap.c
+util/memswap.c
util/mmap.c
util/namespaces.c
../lib/bitmap.c
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sowmini Varadhan <[email protected]>
[ Upstream commit d36f45e5b46723cf2d4147173e18c52d4143176d ]
Address/port initialization should work correctly regardless
of the order in which command line arguments are supplied,
E.g, cfg_port should be used to connect to the remote host
even if it is processed after -D, src/dst address initialization
should not require that [-4|-6] be specified before
the -S or -D args, receiver should be able to bind to *.<cfg_port>
Achieve this by making sure that the address/port structures
are initialized after all command line options are parsed.
Store cfg_port in host-byte order, and use htons()
to set up the sin_port/sin6_port before bind/connect,
so that the network system calls get the correct values
in network-byte order.
Signed-off-by: Sowmini Varadhan <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/msg_zerocopy.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
--- a/tools/testing/selftests/net/msg_zerocopy.c
+++ b/tools/testing/selftests/net/msg_zerocopy.c
@@ -259,22 +259,28 @@ static int setup_ip6h(struct ipv6hdr *ip
return sizeof(*ip6h);
}
-static void setup_sockaddr(int domain, const char *str_addr, void *sockaddr)
+
+static void setup_sockaddr(int domain, const char *str_addr,
+ struct sockaddr_storage *sockaddr)
{
struct sockaddr_in6 *addr6 = (void *) sockaddr;
struct sockaddr_in *addr4 = (void *) sockaddr;
switch (domain) {
case PF_INET:
+ memset(addr4, 0, sizeof(*addr4));
addr4->sin_family = AF_INET;
addr4->sin_port = htons(cfg_port);
- if (inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1)
+ if (str_addr &&
+ inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1)
error(1, 0, "ipv4 parse error: %s", str_addr);
break;
case PF_INET6:
+ memset(addr6, 0, sizeof(*addr6));
addr6->sin6_family = AF_INET6;
addr6->sin6_port = htons(cfg_port);
- if (inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1)
+ if (str_addr &&
+ inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1)
error(1, 0, "ipv6 parse error: %s", str_addr);
break;
default:
@@ -603,6 +609,7 @@ static void parse_opts(int argc, char **
sizeof(struct tcphdr) -
40 /* max tcp options */;
int c;
+ char *daddr = NULL, *saddr = NULL;
cfg_payload_len = max_payload_len;
@@ -627,7 +634,7 @@ static void parse_opts(int argc, char **
cfg_cpu = strtol(optarg, NULL, 0);
break;
case 'D':
- setup_sockaddr(cfg_family, optarg, &cfg_dst_addr);
+ daddr = optarg;
break;
case 'i':
cfg_ifindex = if_nametoindex(optarg);
@@ -638,7 +645,7 @@ static void parse_opts(int argc, char **
cfg_cork_mixed = true;
break;
case 'p':
- cfg_port = htons(strtoul(optarg, NULL, 0));
+ cfg_port = strtoul(optarg, NULL, 0);
break;
case 'r':
cfg_rx = true;
@@ -647,7 +654,7 @@ static void parse_opts(int argc, char **
cfg_payload_len = strtoul(optarg, NULL, 0);
break;
case 'S':
- setup_sockaddr(cfg_family, optarg, &cfg_src_addr);
+ saddr = optarg;
break;
case 't':
cfg_runtime_ms = 200 + strtoul(optarg, NULL, 10) * 1000;
@@ -660,6 +667,8 @@ static void parse_opts(int argc, char **
break;
}
}
+ setup_sockaddr(cfg_family, daddr, &cfg_dst_addr);
+ setup_sockaddr(cfg_family, saddr, &cfg_src_addr);
if (cfg_payload_len > max_payload_len)
error(1, 0, "-s: payload exceeds max (%d)", max_payload_len);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Li <[email protected]>
[ Upstream commit 99fdf6b1cadf41bb253408589788f025027274f3 ]
This patch fixes a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Mingguang Qu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -2785,8 +2785,12 @@ int hns3_uninit_all_ring(struct hns3_nic
h->ae_algo->ops->reset_queue(h, i);
hns3_fini_ring(priv->ring_data[i].ring);
+ devm_kfree(priv->dev, priv->ring_data[i].ring);
hns3_fini_ring(priv->ring_data[i + h->kinfo.num_tqps].ring);
+ devm_kfree(priv->dev,
+ priv->ring_data[i + h->kinfo.num_tqps].ring);
}
+ devm_kfree(priv->dev, priv->ring_data);
return 0;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nogah Frankel <[email protected]>
[ Upstream commit 8234af2db3614d78b49e77ef46ea8cfab6586568 ]
Update the offload flag, TCQ_F_OFFLOADED, in each dump call (and ignore
the offloading function return value in relation to this flag).
This is done because a qdisc is being initialized, and therefore offloaded
before being grafted. Since the ability of the driver to offload the qdisc
depends on its location, a qdisc can be offloaded and un-offloaded by graft
calls, that doesn't effect the qdisc itself.
Fixes: 428a68af3a7c ("net: sched: Move to new offload indication in RED"
Signed-off-by: Nogah Frankel <[email protected]>
Reviewed-by: Yuval Mintz <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_red.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -157,7 +157,6 @@ static int red_offload(struct Qdisc *sch
.handle = sch->handle,
.parent = sch->parent,
};
- int err;
if (!tc_can_offload(dev) || !dev->netdev_ops->ndo_setup_tc)
return -EOPNOTSUPP;
@@ -172,14 +171,7 @@ static int red_offload(struct Qdisc *sch
opt.command = TC_RED_DESTROY;
}
- err = dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_QDISC_RED, &opt);
-
- if (!err && enable)
- sch->flags |= TCQ_F_OFFLOADED;
- else
- sch->flags &= ~TCQ_F_OFFLOADED;
-
- return err;
+ return dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_QDISC_RED, &opt);
}
static void red_destroy(struct Qdisc *sch)
@@ -294,12 +286,22 @@ static int red_dump_offload_stats(struct
.stats.qstats = &sch->qstats,
},
};
+ int err;
+
+ sch->flags &= ~TCQ_F_OFFLOADED;
- if (!(sch->flags & TCQ_F_OFFLOADED))
+ if (!tc_can_offload(dev) || !dev->netdev_ops->ndo_setup_tc)
+ return 0;
+
+ err = dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_QDISC_RED,
+ &hw_stats);
+ if (err == -EOPNOTSUPP)
return 0;
- return dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_QDISC_RED,
- &hw_stats);
+ if (!err)
+ sch->flags |= TCQ_F_OFFLOADED;
+
+ return err;
}
static int red_dump(struct Qdisc *sch, struct sk_buff *skb)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 63f1e05f7fe9ca509c60154d6a833abf96eecdc9 ]
df->governor is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.
Notice that df->governor is being null checked at line 1004:
if (df->governor) {, which implies it might be null.
Fix this by null checking df->governor before dereferencing it.
Addresses-Coverity-ID: 1401988 ("Dereference before null check")
Fixes: bcf23c79c4e4 ("PM / devfreq: Fix available_governor sysfs")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Chanwoo Choi <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/devfreq/devfreq.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -996,7 +996,8 @@ static ssize_t governor_store(struct dev
if (df->governor == governor) {
ret = 0;
goto out;
- } else if (df->governor->immutable || governor->immutable) {
+ } else if ((df->governor && df->governor->immutable) ||
+ governor->immutable) {
ret = -EINVAL;
goto out;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleksij Rempel <[email protected]>
[ Upstream commit 1bfe8889380890efe4943d125124f5a7b48571b0 ]
The only way of stopping the watchdog is by resetting it.
Add the watchdog op for stopping the device and reset if
a reset line is provided.
At same time WDOG_HW_RUNNING should be remove from dw_wdt_start.
As commented by Guenter Roeck:
dw_wdt sets WDOG_HW_RUNNING in its open function. Result is
that the kref_get() in watchdog_open() won't be executed. But then
kref_put() in close will be called since the watchdog now does stop.
This causes the imbalance.
Signed-off-by: Oleksij Rempel <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/watchdog/dw_wdt.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -127,14 +127,27 @@ static int dw_wdt_start(struct watchdog_
dw_wdt_set_timeout(wdd, wdd->timeout);
- set_bit(WDOG_HW_RUNNING, &wdd->status);
-
writel(WDOG_CONTROL_REG_WDT_EN_MASK,
dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
return 0;
}
+static int dw_wdt_stop(struct watchdog_device *wdd)
+{
+ struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+ if (!dw_wdt->rst) {
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+ return 0;
+ }
+
+ reset_control_assert(dw_wdt->rst);
+ reset_control_deassert(dw_wdt->rst);
+
+ return 0;
+}
+
static int dw_wdt_restart(struct watchdog_device *wdd,
unsigned long action, void *data)
{
@@ -173,6 +186,7 @@ static const struct watchdog_info dw_wdt
static const struct watchdog_ops dw_wdt_ops = {
.owner = THIS_MODULE,
.start = dw_wdt_start,
+ .stop = dw_wdt_stop,
.ping = dw_wdt_ping,
.set_timeout = dw_wdt_set_timeout,
.get_timeleft = dw_wdt_get_timeleft,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jerome Brunet <[email protected]>
[ Upstream commit 12a26c298d2a8b1cab498533fa65198e49e3afd3 ]
divider_recalc_rate() is an helper function used by clock divider of
different types, so the structure containing the 'hw' pointer is not
always a 'struct clk_divider'
At the following line:
> div = _get_div(table, val, flags, divider->width);
in several cases, the value of 'divider->width' is garbage as the actual
structure behind this memory is not a 'struct clk_divider'
Fortunately, this width value is used by _get_val() only when
CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so
far when the structure is not a 'struct clk_divider'. This is probably
why we did not notice this bug before
Fixes: afe76c8fd030 ("clk: allow a clk divider with max divisor when zero")
Signed-off-by: Jerome Brunet <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Sylvain Lemieux <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk-divider.c | 7 +++----
drivers/clk/hisilicon/clkdivider-hi6220.c | 2 +-
drivers/clk/nxp/clk-lpc32xx.c | 2 +-
drivers/clk/qcom/clk-regmap-divider.c | 2 +-
drivers/clk/sunxi-ng/ccu_div.c | 2 +-
drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 2 +-
drivers/rtc/rtc-ac100.c | 6 ++++--
include/linux/clk-provider.h | 2 +-
8 files changed, 13 insertions(+), 12 deletions(-)
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -118,12 +118,11 @@ static unsigned int _get_val(const struc
unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
unsigned int val,
const struct clk_div_table *table,
- unsigned long flags)
+ unsigned long flags, unsigned long width)
{
- struct clk_divider *divider = to_clk_divider(hw);
unsigned int div;
- div = _get_div(table, val, flags, divider->width);
+ div = _get_div(table, val, flags, width);
if (!div) {
WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
@@ -145,7 +144,7 @@ static unsigned long clk_divider_recalc_
val &= div_mask(divider->width);
return divider_recalc_rate(hw, parent_rate, val, divider->table,
- divider->flags);
+ divider->flags, divider->width);
}
static bool _is_valid_table_div(const struct clk_div_table *table,
--- a/drivers/clk/hisilicon/clkdivider-hi6220.c
+++ b/drivers/clk/hisilicon/clkdivider-hi6220.c
@@ -56,7 +56,7 @@ static unsigned long hi6220_clkdiv_recal
val &= div_mask(dclk->width);
return divider_recalc_rate(hw, parent_rate, val, dclk->table,
- CLK_DIVIDER_ROUND_CLOSEST);
+ CLK_DIVIDER_ROUND_CLOSEST, dclk->width);
}
static long hi6220_clkdiv_round_rate(struct clk_hw *hw, unsigned long rate,
--- a/drivers/clk/nxp/clk-lpc32xx.c
+++ b/drivers/clk/nxp/clk-lpc32xx.c
@@ -956,7 +956,7 @@ static unsigned long clk_divider_recalc_
val &= div_mask(divider->width);
return divider_recalc_rate(hw, parent_rate, val, divider->table,
- divider->flags);
+ divider->flags, divider->width);
}
static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
--- a/drivers/clk/qcom/clk-regmap-divider.c
+++ b/drivers/clk/qcom/clk-regmap-divider.c
@@ -59,7 +59,7 @@ static unsigned long div_recalc_rate(str
div &= BIT(divider->width) - 1;
return divider_recalc_rate(hw, parent_rate, div, NULL,
- CLK_DIVIDER_ROUND_CLOSEST);
+ CLK_DIVIDER_ROUND_CLOSEST, divider->width);
}
const struct clk_ops clk_regmap_div_ops = {
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -71,7 +71,7 @@ static unsigned long ccu_div_recalc_rate
parent_rate);
val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
- cd->div.flags);
+ cd->div.flags, cd->div.width);
if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
val /= cd->fixed_post_div;
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c
@@ -698,7 +698,7 @@ static unsigned long dsi_pll_14nm_postdi
val &= div_mask(width);
return divider_recalc_rate(hw, parent_rate, val, NULL,
- postdiv->flags);
+ postdiv->flags, width);
}
static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
--- a/drivers/rtc/rtc-ac100.c
+++ b/drivers/rtc/rtc-ac100.c
@@ -137,13 +137,15 @@ static unsigned long ac100_clkout_recalc
div = (reg >> AC100_CLKOUT_PRE_DIV_SHIFT) &
((1 << AC100_CLKOUT_PRE_DIV_WIDTH) - 1);
prate = divider_recalc_rate(hw, prate, div,
- ac100_clkout_prediv, 0);
+ ac100_clkout_prediv, 0,
+ AC100_CLKOUT_PRE_DIV_WIDTH);
}
div = (reg >> AC100_CLKOUT_DIV_SHIFT) &
(BIT(AC100_CLKOUT_DIV_WIDTH) - 1);
return divider_recalc_rate(hw, prate, div, NULL,
- CLK_DIVIDER_POWER_OF_TWO);
+ CLK_DIVIDER_POWER_OF_TWO,
+ AC100_CLKOUT_DIV_WIDTH);
}
static long ac100_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -412,7 +412,7 @@ extern const struct clk_ops clk_divider_
unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
unsigned int val, const struct clk_div_table *table,
- unsigned long flags);
+ unsigned long flags, unsigned long width);
long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
unsigned long rate, unsigned long *prate,
const struct clk_div_table *table,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
[ Upstream commit 61647823aa920e395afcce4b57c32afb51456cab ]
d_move() will call __d_drop() and then __d_rehash()
on the dentry being moved. This creates a small window
when the dentry appears to be unhashed. Many tests
of d_unhashed() are made under ->d_lock and so are safe
from racing with this window, but some aren't.
In particular, getcwd() calls d_unlinked() (which calls
d_unhashed()) without d_lock protection, so it can race.
This races has been seen in practice with lustre, which uses d_move() as
part of name lookup. See:
https://jira.hpdd.intel.com/browse/LU-9735
It could race with a regular rename(), and result in ENOENT instead
of either the 'before' or 'after' name.
The race can be demonstrated with a simple program which
has two threads, one renaming a directory back and forth
while another calls getcwd() within that directory: it should never
fail, but does. See:
https://patchwork.kernel.org/patch/9455345/
We could fix this race by taking d_lock and rechecking when
d_unhashed() reports true. Alternately when can remove the window,
which is the approach this patch takes.
___d_drop() is introduce which does *not* clear d_hash.pprev
so the dentry still appears to be hashed. __d_drop() calls
___d_drop(), then clears d_hash.pprev.
__d_move() now uses ___d_drop() and only clears d_hash.pprev
when not rehashing.
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dcache.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -468,9 +468,11 @@ static void dentry_lru_add(struct dentry
* d_drop() is used mainly for stuff that wants to invalidate a dentry for some
* reason (NFS timeouts or autofs deletes).
*
- * __d_drop requires dentry->d_lock.
+ * __d_drop requires dentry->d_lock
+ * ___d_drop doesn't mark dentry as "unhashed"
+ * (dentry->d_hash.pprev will be LIST_POISON2, not NULL).
*/
-void __d_drop(struct dentry *dentry)
+static void ___d_drop(struct dentry *dentry)
{
if (!d_unhashed(dentry)) {
struct hlist_bl_head *b;
@@ -486,12 +488,17 @@ void __d_drop(struct dentry *dentry)
hlist_bl_lock(b);
__hlist_bl_del(&dentry->d_hash);
- dentry->d_hash.pprev = NULL;
hlist_bl_unlock(b);
/* After this call, in-progress rcu-walk path lookup will fail. */
write_seqcount_invalidate(&dentry->d_seq);
}
}
+
+void __d_drop(struct dentry *dentry)
+{
+ ___d_drop(dentry);
+ dentry->d_hash.pprev = NULL;
+}
EXPORT_SYMBOL(__d_drop);
void d_drop(struct dentry *dentry)
@@ -2386,7 +2393,7 @@ EXPORT_SYMBOL(d_delete);
static void __d_rehash(struct dentry *entry)
{
struct hlist_bl_head *b = d_hash(entry->d_name.hash);
- BUG_ON(!d_unhashed(entry));
+
hlist_bl_lock(b);
hlist_bl_add_head_rcu(&entry->d_hash, b);
hlist_bl_unlock(b);
@@ -2821,9 +2828,9 @@ static void __d_move(struct dentry *dent
write_seqcount_begin_nested(&target->d_seq, DENTRY_D_LOCK_NESTED);
/* unhash both */
- /* __d_drop does write_seqcount_barrier, but they're OK to nest. */
- __d_drop(dentry);
- __d_drop(target);
+ /* ___d_drop does write_seqcount_barrier, but they're OK to nest. */
+ ___d_drop(dentry);
+ ___d_drop(target);
/* Switch the names.. */
if (exchange)
@@ -2835,6 +2842,8 @@ static void __d_move(struct dentry *dent
__d_rehash(dentry);
if (exchange)
__d_rehash(target);
+ else
+ target->d_hash.pprev = NULL;
/* ... and switch them in the tree */
if (IS_ROOT(dentry)) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maor Gottlieb <[email protected]>
[ Upstream commit 4e2b53a5cb5a8243284dd7ec4980d2dc556e79f0 ]
Add missing inner RSS support capability as part of
the RSS supported fields.
In addition change MLX5_RX_HASH_INNER to 1UL << 31 in
order to define it as unsigned.
Fixes: 309fa3470fca ("IB/mlx5: Add support for RSS on the inner packet")
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx5/main.c | 3 ++-
include/uapi/rdma/mlx5-abi.h | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -682,7 +682,8 @@ static int mlx5_ib_query_device(struct i
MLX5_RX_HASH_SRC_PORT_TCP |
MLX5_RX_HASH_DST_PORT_TCP |
MLX5_RX_HASH_SRC_PORT_UDP |
- MLX5_RX_HASH_DST_PORT_UDP;
+ MLX5_RX_HASH_DST_PORT_UDP |
+ MLX5_RX_HASH_INNER;
resp.response_length += sizeof(resp.rss_caps);
}
} else {
--- a/include/uapi/rdma/mlx5-abi.h
+++ b/include/uapi/rdma/mlx5-abi.h
@@ -307,7 +307,7 @@ enum mlx5_rx_hash_fields {
MLX5_RX_HASH_SRC_PORT_UDP = 1 << 6,
MLX5_RX_HASH_DST_PORT_UDP = 1 << 7,
/* Save bits for future fields */
- MLX5_RX_HASH_INNER = 1 << 31
+ MLX5_RX_HASH_INNER = (1UL << 31),
};
struct mlx5_ib_create_qp_rss {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Moni Shoua <[email protected]>
[ Upstream commit a42b63c1ac1986f17f71bc91a6b0aaa14d4dae71 ]
Change the default mapping between TC and TCG as follows:
Prio | TC/TCG
| from to
| (set by FW) (set by SW)
---------+-----------------------------------
0 | 0/0 0/7
1 | 1/0 0/6
2 | 2/0 0/5
3 | 3/0 0/4
4 | 4/0 0/3
5 | 5/0 0/2
6 | 6/0 0/1
7 | 7/0 0/0
These new settings cause that a pause frame for any prio stops
traffic for all prios.
Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support")
Signed-off-by: Moni Shoua <[email protected]>
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 +++++
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 +++++++
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 +
3 files changed, 13 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
@@ -310,6 +310,7 @@ static int mlx4_en_ets_validate(struct m
}
switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_VENDOR:
case IEEE_8021QAZ_TSA_STRICT:
break;
case IEEE_8021QAZ_TSA_ETS:
@@ -347,6 +348,10 @@ static int mlx4_en_config_port_scheduler
/* higher TC means higher priority => lower pg */
for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) {
switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_VENDOR:
+ pg[i] = MLX4_EN_TC_VENDOR;
+ tc_tx_bw[i] = MLX4_EN_BW_MAX;
+ break;
case IEEE_8021QAZ_TSA_STRICT:
pg[i] = num_strict++;
tc_tx_bw[i] = MLX4_EN_BW_MAX;
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3336,6 +3336,13 @@ int mlx4_en_init_netdev(struct mlx4_en_d
priv->msg_enable = MLX4_EN_MSG_LEVEL;
#ifdef CONFIG_MLX4_EN_DCB
if (!mlx4_is_slave(priv->mdev->dev)) {
+ u8 prio;
+
+ for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; ++prio) {
+ priv->ets.prio_tc[prio] = prio;
+ priv->ets.tc_tsa[prio] = IEEE_8021QAZ_TSA_VENDOR;
+ }
+
priv->dcbx_cap = DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_HOST |
DCB_CAP_DCBX_VER_IEEE;
priv->flags |= MLX4_EN_DCB_ENABLED;
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -479,6 +479,7 @@ struct mlx4_en_frag_info {
#define MLX4_EN_BW_MIN 1
#define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */
+#define MLX4_EN_TC_VENDOR 0
#define MLX4_EN_TC_ETS 7
enum dcb_pfc_type {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 9f5c6d8777a2d962b0eeacb2a16f37da6bea545b ]
This improve the error message so that user can know event-name error
before writing new events to kprobe-events interface.
E.g.
======
#./perf probe -x /lib64/libc-2.25.so malloc_get_state*
Internal error: "malloc_get_state@GLIBC_2" is an invalid event name.
Error: Failed to add events.
======
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Acked-by: Ravi Bangoria <[email protected]>
Reviewed-by: Thomas Richter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: bhargavb <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/151275040665.24652.5188568529237584489.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/probe-event.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -2625,6 +2625,14 @@ static int get_new_event_name(char *buf,
out:
free(nbase);
+
+ /* Final validation */
+ if (ret >= 0 && !is_c_func_name(buf)) {
+ pr_warning("Internal error: \"%s\" is an invalid event name.\n",
+ buf);
+ ret = -EINVAL;
+ }
+
return ret;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Brunner <[email protected]>
[ Upstream commit 09ee9dba9611cd382fd360a99ad1c2fa23bfdca8 ]
If SNAT modifies the source address the resulting packet might match
an IPsec policy, reinject the packet if that's the case.
The exact same thing is already done for IPv4.
Signed-off-by: Tobias Brunner <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -138,6 +138,14 @@ static int ip6_finish_output(struct net
return ret;
}
+#if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
+ /* Policy lookup after SNAT yielded a new policy */
+ if (skb_dst(skb)->xfrm) {
+ IPCB(skb)->flags |= IPSKB_REROUTED;
+ return dst_output(net, sk, skb);
+ }
+#endif
+
if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
dst_allfrag(skb_dst(skb)) ||
(IP6CB(skb)->frag_max_size && skb->len > IP6CB(skb)->frag_max_size))
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rasmus Villemoes <[email protected]>
[ Upstream commit d5c7b4d5ac2237a6da7ced3adfe6b8bf769f8cc6 ]
Commit a22950c888e3 (mmc: sdhci-of-esdhc: add quirk
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to
enable the broken timeout val quirk for ls1021a, but did not add the
corresponding compatible string to the device tree, so it didn't really
have any effect. Fix that.
Signed-off-by: Rasmus Villemoes <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -155,7 +155,7 @@
};
esdhc: esdhc@1560000 {
- compatible = "fsl,esdhc";
+ compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Blumenstingl <[email protected]>
[ Upstream commit 86aacdca66774051cbc0958110a48074b57a060b ]
"rem * SDM_DEN" can easily overflow on the 32-bit Meson8 and Meson8b
SoCs if the "remainder" (after the division operation) is greater than
262143Hz. This is likely to happen since the input clock for the MPLLs
on Meson8 and Meson8b is "fixed_pll", which is running at a rate of
2550MHz.
One example where this was observed to be problematic was the Ethernet
clock calculation (which takes MPLL2 as input). When requesting a rate
of 125MHz there is a remainder of 2500000Hz.
The resulting MPLL2 rate before this patch was 127488329Hz.
The resulting MPLL2 rate after this patch is 124999103Hz.
Commit b609338b26f5 ("clk: meson: mpll: use 64bit math in
rate_from_params") already fixed a similar issue in rate_from_params.
Fixes: 007e6e5c5f01d3 ("clk: meson: mpll: add rw operation")
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/meson/clk-mpll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -98,7 +98,7 @@ static void params_from_rate(unsigned lo
*sdm = SDM_DEN - 1;
} else {
*n2 = div;
- *sdm = DIV_ROUND_UP(rem * SDM_DEN, requested_rate);
+ *sdm = DIV_ROUND_UP_ULL((u64)rem * SDM_DEN, requested_rate);
}
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shiraz Saleem <[email protected]>
[ Upstream commit fe99afd1febd74e0ef1fed7e3283f09effe1f4f0 ]
Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2
as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF)
object count to power of 2 to satisfy hardware requirement.
Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls")
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/i40iw/i40iw_ctrl.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
@@ -3928,8 +3928,10 @@ enum i40iw_status_code i40iw_config_fpm_
hmc_info->hmc_obj[I40IW_HMC_IW_APBVT_ENTRY].cnt = 1;
hmc_info->hmc_obj[I40IW_HMC_IW_MR].cnt = mrwanted;
- hmc_info->hmc_obj[I40IW_HMC_IW_XF].cnt = I40IW_MAX_WQ_ENTRIES * qpwanted;
- hmc_info->hmc_obj[I40IW_HMC_IW_Q1].cnt = 4 * I40IW_MAX_IRD_SIZE * qpwanted;
+ hmc_info->hmc_obj[I40IW_HMC_IW_XF].cnt =
+ roundup_pow_of_two(I40IW_MAX_WQ_ENTRIES * qpwanted);
+ hmc_info->hmc_obj[I40IW_HMC_IW_Q1].cnt =
+ roundup_pow_of_two(2 * I40IW_MAX_IRD_SIZE * qpwanted);
hmc_info->hmc_obj[I40IW_HMC_IW_XFFL].cnt =
hmc_info->hmc_obj[I40IW_HMC_IW_XF].cnt / hmc_fpm_misc->xf_block_size;
hmc_info->hmc_obj[I40IW_HMC_IW_Q1FL].cnt =
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shiraz Saleem <[email protected]>
[ Upstream commit df8b13a1b23356d01dfc4647a5629cdb0f4ce566 ]
Partial FPDU processing is broken as the sequence number
for the first partial FPDU is wrong due to incorrect
Q2 buffer offset. The offset should be 64 rather than 16.
Fixes: 786c6adb3a94 ("i40iw: add puda code")
Signed-off-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/i40iw/i40iw_d.h | 1 +
drivers/infiniband/hw/i40iw/i40iw_puda.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/hw/i40iw/i40iw_d.h
+++ b/drivers/infiniband/hw/i40iw/i40iw_d.h
@@ -97,6 +97,7 @@
#define RDMA_OPCODE_MASK 0x0f
#define RDMA_READ_REQ_OPCODE 1
#define Q2_BAD_FRAME_OFFSET 72
+#define Q2_FPSN_OFFSET 64
#define CQE_MAJOR_DRV 0x8000
#define I40IW_TERM_SENT 0x01
--- a/drivers/infiniband/hw/i40iw/i40iw_puda.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_puda.c
@@ -1378,7 +1378,7 @@ static void i40iw_ieq_handle_exception(s
u32 *hw_host_ctx = (u32 *)qp->hw_host_ctx;
u32 rcv_wnd = hw_host_ctx[23];
/* first partial seq # in q2 */
- u32 fps = qp->q2_buf[16];
+ u32 fps = *(u32 *)(qp->q2_buf + Q2_FPSN_OFFSET);
struct list_head *rxlist = &pfpdu->rxlist;
struct list_head *plist;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 42ca8082e260dcfd8afa2afa6ec1940b9d41724c upstream.
With some microcode upgrades, new CPUID features can become visible on
the CPU. Check what the kernel has mirrored now and issue a warning
hinting at possible things the user/admin can do to make use of the
newly visible features.
Originally-by: Ashok Raj <[email protected]>
Tested-by: Ashok Raj <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/common.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1757,5 +1757,25 @@ core_initcall(init_cpu_syscore);
*/
void microcode_check(void)
{
+ struct cpuinfo_x86 info;
+
perf_check_microcode();
+
+ /* Reload CPUID max function as it might've changed. */
+ info.cpuid_level = cpuid_eax(0);
+
+ /*
+ * Copy all capability leafs to pick up the synthetic ones so that
+ * memcmp() below doesn't fail on that. The ones coming from CPUID will
+ * get overwritten in get_cpu_cap().
+ */
+ memcpy(&info.x86_capability, &boot_cpu_data.x86_capability, sizeof(info.x86_capability));
+
+ get_cpu_cap(&info);
+
+ if (!memcmp(&info.x86_capability, &boot_cpu_data.x86_capability, sizeof(info.x86_capability)))
+ return;
+
+ pr_warn("x86/CPU: CPU features have changed after loading microcode, but might not take effect.\n");
+ pr_warn("x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.\n");
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rui Hua <[email protected]>
[ Upstream commit b221fc130c49c50f4c2250d22e873420765a9fa2 ]
The read request might meet error when searching the btree, but the error
was not handled in cache_lookup(), and this kind of metadata failure will
not go into cached_dev_read_error(), finally, the upper layer will receive
bi_status=0. In this patch we judge the metadata error by the return
value of bch_btree_map_keys(), there are two potential paths give rise to
the error:
1. Because the btree is not totally cached in memery, we maybe get error
when read btree node from cache device (see bch_btree_node_get()), the
likely errno is -EIO, -ENOMEM
2. When read miss happens, bch_btree_insert_check_key() will be called to
insert a "replace_key" to btree(see cached_dev_cache_miss(), just for
doing preparatory work before insert the missed data to cache device),
a failure can also happen in this situation, the likely errno is
-ENOMEM
bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will
get either -EIO or -ENOMEM in above two cases. if this happened, we should
NOT recover data from backing device (when cache device is dirty) because
we don't know whether bkeys the read request covered are all clean. And
after that happened, s->iop.status is still its initially value(0) before
we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into
cached_dev_read_error(), and finally it can be passed to upper layer, or
recovered by reread from backing device.
[edit by mlyle: patch formatting, word-wrap, comment spelling,
commit log format]
Signed-off-by: Hua Rui <[email protected]>
Reviewed-by: Michael Lyle <[email protected]>
Signed-off-by: Michael Lyle <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/request.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -576,6 +576,7 @@ static void cache_lookup(struct closure
{
struct search *s = container_of(cl, struct search, iop.cl);
struct bio *bio = &s->bio.bio;
+ struct cached_dev *dc;
int ret;
bch_btree_op_init(&s->op, -1);
@@ -588,6 +589,27 @@ static void cache_lookup(struct closure
return;
}
+ /*
+ * We might meet err when searching the btree, If that happens, we will
+ * get negative ret, in this scenario we should not recover data from
+ * backing device (when cache device is dirty) because we don't know
+ * whether bkeys the read request covered are all clean.
+ *
+ * And after that happened, s->iop.status is still its initial value
+ * before we submit s->bio.bio
+ */
+ if (ret < 0) {
+ BUG_ON(ret == -EINTR);
+ if (s->d && s->d->c &&
+ !UUID_FLASH_ONLY(&s->d->c->uuids[s->d->id])) {
+ dc = container_of(s->d, struct cached_dev, disk);
+ if (dc && atomic_read(&dc->has_dirty))
+ s->recoverable = false;
+ }
+ if (!s->iop.status)
+ s->iop.status = BLK_STS_IOERR;
+ }
+
closure_return(cl);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit 1f110e7cae09e6c6a144616480d1a9dd99c5208a ]
when the following command
# tc action add action sample rate 100 group 100 index 100
is run for the first time, and psample_group_get(100) fails to create a
new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus
causing the following error:
BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
IP: psample_group_put+0x15/0x71 [psample]
PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key]
CPU: 2 PID: 5740 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:psample_group_put+0x15/0x71 [psample]
RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c
FS: 00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_sample_init+0x125/0x1d0 [act_sample]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f7637523ba0
RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0
RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003
RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000
R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60
Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b
RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0
CR2: 000000000000001c
Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p)
are done only when p is not NULL.
Fixes: cadb9c9fdbc6 ("net/sched: act_sample: Fix error path in init")
Signed-off-by: Davide Caratti <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_sample.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/sched/act_sample.c
+++ b/net/sched/act_sample.c
@@ -103,7 +103,8 @@ static void tcf_sample_cleanup(struct tc
psample_group = rtnl_dereference(s->psample_group);
RCU_INIT_POINTER(s->psample_group, NULL);
- psample_group_put(psample_group);
+ if (psample_group)
+ psample_group_put(psample_group);
}
static bool tcf_sample_dev_ok_push(struct net_device *dev)
On 04/10/2018 04:22 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.17 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Apr 12 21:27:22 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.17-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Wed, Apr 11, 2018 at 12:22:22AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.17 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Apr 12 21:27:22 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 147 pass: 147 fail: 0
Qemu test results:
total: 141 pass: 141 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On Wed, Apr 11, 2018 at 12:22:22AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.17 release.
> There are 168 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Apr 12 21:27:22 UTC 2018.
> Anything received after that time might be too late.
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
There is a regression in test 'select04' noted below. It is a false
failure caused by an infrastructure issue on the server running qemu
jobs. I re-ran the test and it passed (under qemu), and it passed on
real hardware.
Summary
------------------------------------------------------------------------
kernel: 4.15.17-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.15.y
git commit: 99a63ea2bfce072fa43311cceb4642c1b2ccca9c
git describe: v4.15.16-169-g99a63ea2bfce
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.15-oe/build/v4.15.16-169-g99a63ea2bfce
Regressions (compared to build v4.15.16-124-gff369be839c7)
------------------------------------------------------------------------
qemu_x86_64:
ltp-syscalls-tests:
* runltp_syscalls
* select04
* test src: git://github.com/linux-test-project/ltp.git
Boards, architectures and test suites:
-------------------------------------
dragonboard-410c - arm64
* boot - pass: 20
* kselftest - skip: 20, pass: 45
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 148, pass: 1002
* ltp-timers-tests - skip: 1, pass: 12
hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 17, pass: 48
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 151, pass: 999
* ltp-timers-tests - skip: 1, pass: 12
juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 18, pass: 47
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12
qemu_x86_64
* boot - pass: 22
* kselftest - skip: 23, pass: 57
* kselftest-vsyscall-mode-native - skip: 23, pass: 57
* kselftest-vsyscall-mode-none - skip: 23, pass: 57
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 148, fail: 2, pass: 1000
* ltp-timers-tests - skip: 1, pass: 12
x15 - arm
* boot - pass: 20
* kselftest - skip: 21, pass: 41
* libhugetlbfs - skip: 1, fail: 1, pass: 86
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 18, pass: 63
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 97, pass: 1053
* ltp-timers-tests - skip: 1, pass: 12
x86_64
* boot - pass: 22
* kselftest - skip: 19, pass: 61
* kselftest-vsyscall-mode-native - skip: 19, pass: 61
* kselftest-vsyscall-mode-none - skip: 19, fail: 1, pass: 60
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 1, pass: 62
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 119, pass: 1031
* ltp-timers-tests - skip: 1, pass: 12
--
Linaro QA (beta)
https://qa-reports.linaro.org