Version 6 : Sorry to send this out again but version 5 contained a little less
verbosity then required.
Again these are just some simple coding style changes to the file, so nothing
of importance.
Declaration of function was spread over three lines.
Signed-off-by: John Whitmore <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 981433f6c4f2..7ea516609d4c 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -498,9 +498,7 @@ static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
return retValue;
}
-void HTResetIOTSetting(
- PRT_HIGH_THROUGHPUT pHTInfo
-)
+void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
{
pHTInfo->IOTAction = 0;
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
--
2.17.0
Remove unneccessary parentheses - Coding Style change
Signed-off-by: John Whitmore <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 9cca4a8f1cf5..fad740309558 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -529,7 +529,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
- pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
+ pCapELE = (PHT_CAPABILITY_ELE)&posHTCap[4];
} else {
pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
}
@@ -1072,10 +1072,10 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
// Initialize all of the parameters related to 11n
- memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
- memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
- memset((void *)(&(pHTInfo->PeerHTCapBuf)), 0, sizeof(pHTInfo->PeerHTCapBuf));
- memset((void *)(&(pHTInfo->PeerHTInfoBuf)), 0, sizeof(pHTInfo->PeerHTInfoBuf));
+ memset((void *)(&pHTInfo->SelfHTCap), 0, sizeof(pHTInfo->SelfHTCap));
+ memset((void *)(&pHTInfo->SelfHTInfo), 0, sizeof(pHTInfo->SelfHTInfo));
+ memset((void *)(&pHTInfo->PeerHTCapBuf), 0, sizeof(pHTInfo->PeerHTCapBuf));
+ memset((void *)(&pHTInfo->PeerHTInfoBuf), 0, sizeof(pHTInfo->PeerHTInfoBuf));
pHTInfo->bSwBwInProgress = false;
pHTInfo->ChnlOp = CHNLOP_NONE;
@@ -1091,7 +1091,7 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
//MCS rate initialized here
{
- u8 *RegHTSuppRateSets = &(ieee->RegHTSuppRateSet[0]);
+ u8 *RegHTSuppRateSets = &ieee->RegHTSuppRateSet[0];
RegHTSuppRateSets[0] = 0xFF; //support MCS 0~7
RegHTSuppRateSets[1] = 0xFF; //support MCS 8~15
--
2.17.0
Change comparison to NULL to better adhere to coding standard.
Signed-off-by: John Whitmore <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 7ea516609d4c..9cca4a8f1cf5 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -520,7 +520,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
PHT_CAPABILITY_ELE pCapELE = NULL;
//u8 bIsDeclareMCS13;
- if ((posHTCap == NULL) || (pHT == NULL)) {
+ if (!posHTCap || !pHT) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTCap or pHTInfo can't be null in HTConstructCapabilityElement()\n");
return;
}
@@ -624,7 +624,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
PHT_INFORMATION_ELE pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
- if ((posHTInfo == NULL) || (pHTInfoEle == NULL)) {
+ if (!posHTInfo || !pHTInfoEle) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
return;
}
@@ -687,7 +687,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
* *****************************************************************************************************************/
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len)
{
- if (posRT2RTAgg == NULL) {
+ if (!posRT2RTAgg) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posRT2RTAgg can't be null in HTConstructRT2RTAggElement()\n");
return;
}
@@ -737,7 +737,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
- if (pOperateMCS == NULL) {
+ if (!pOperateMCS) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
return false;
}
@@ -799,7 +799,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
u8 mcsRate = 0;
u8 availableMcsRate[16];
- if (pMCSRateSet == NULL || pMCSFilter == NULL) {
+ if (!pMCSRateSet || !pMCSFilter) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
}
--
2.17.0
Function HTIOTPeerDetermine used incorrect indentation in if statements.
Signed-off-by: John Whitmore <[email protected]>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 65b2cd692ec8..10d9c58680a2 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -362,16 +362,16 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
else if (net->broadcom_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
- (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
- (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0))
+ (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0))
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
- (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
- (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
- (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
- (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
- net->ralink_cap_exist)
+ (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
+ net->ralink_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
else if (net->atheros_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
--
2.17.0
Simple addition & removal of blank lines as required
Signed-off-by: John Whitmore <[email protected]>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 64 +++++--------------
1 file changed, 16 insertions(+), 48 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 1b61a8de1edf..47b6add256d0 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -111,9 +111,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
pHTInfo->UsbRxFwAggrPacketNum = 8;
pHTInfo->UsbRxFwAggrTimeout = 16; ////usb rx FW aggregation timeout threshold.It's in units of 64us
#endif
-
-
}
+
/********************************************************************************************************************
*function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
@@ -124,7 +123,6 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
* *****************************************************************************************************************/
void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
{
-
static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_CAPABILITY_ELE pCapELE;
@@ -148,8 +146,8 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
return;
-
}
+
/********************************************************************************************************************
*function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
@@ -160,7 +158,6 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
* *****************************************************************************************************************/
void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
{
-
static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_INFORMATION_ELE pHTInfoEle;
@@ -261,7 +258,6 @@ static bool IsHTHalfNmodeSGI(struct ieee80211_device *ieee, bool is40MHz)
u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
-
u8 is40MHz;
u8 isShortGI;
@@ -271,7 +267,6 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
-
u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -326,12 +321,11 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
}
}
-
-
bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
{
bool retValue = false;
struct ieee80211_network *net = &ieee->current_network;
+
if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
(memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
@@ -364,6 +358,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
struct ieee80211_network *net = &ieee->current_network;
+
if (net->bssht.bdRT2RTAggregation)
pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
else if (net->broadcom_cap_exist)
@@ -389,6 +384,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
}
+
/********************************************************************************************************************
*function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
@@ -402,7 +398,6 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
return 0;
}
-
/**
* Function: HTIOTActIsDisableMCS15
*
@@ -496,6 +491,7 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
{
u8 retValue = 0;
+
if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
@@ -512,7 +508,6 @@ void HTResetIOTSetting(
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
}
-
/********************************************************************************************************************
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
@@ -536,13 +531,13 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
memset(posHTCap, 0, *len);
if (pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC) {
u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
+
memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
} else {
pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
}
-
//HT capability info
pCapELE->AdvCoding = 0; // This feature is not supported now!!
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
@@ -566,7 +561,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
-
//MAC HT parameters info
// TODO: Nedd to take care of this part
IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
@@ -594,6 +588,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
+
for (i = 1; i < 16; i++)
pCapELE->MCS[i] = 0;
}
@@ -601,7 +596,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//Extended HT Capability Info
memset(&pCapELE->ExtHTCapInfo, 0, 2);
-
//TXBF Capabilities
memset(pCapELE->TxBFCap, 0, 4);
@@ -613,15 +607,13 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
else
*len = 26 + 2;
-
-
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
//Print each field in detail. Driver should not print out this message by default
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
return;
-
}
+
/********************************************************************************************************************
*function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
@@ -636,6 +628,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
PHT_INFORMATION_ELE pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
+
if ((posHTInfo == NULL) || (pHTInfoEle == NULL)) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
return;
@@ -661,9 +654,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
memset(pHTInfoEle->BasicMSC, 0, 16);
-
*len = 22 + 2; //same above
-
} else {
//STA should not generate High Throughput Information Element
*len = 0;
@@ -733,20 +724,14 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
posRT2RTAgg->Octet[5] &= 0xfb;
}
*/
-
#else
// Do Nothing
#endif
posRT2RTAgg->Length = 6;
#endif
-
-
-
-
}
-
/********************************************************************************************************************
*function: Pick the right Rate Adaptive table to use
* input: struct ieee80211_device* ieee
@@ -757,6 +742,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
+
if (pOperateMCS == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
return false;
@@ -787,9 +773,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//should never reach here
default:
-
break;
-
}
return true;
@@ -820,6 +804,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
u8 bitMap;
u8 mcsRate = 0;
u8 availableMcsRate[16];
+
if (pMCSRateSet == NULL || pMCSFilter == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
@@ -849,8 +834,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
return (mcsRate|0x80);
}
-
-
/*
**
**1.Filter our operation rate set with AP's rate set
@@ -863,7 +846,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
-
u8 i = 0;
// filter out operational rate set not supported by AP, the length of it is 16
@@ -871,7 +853,6 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
}
-
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
// TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
@@ -891,6 +872,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
return true;
}
+
void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
void HTOnAssocRsp(struct ieee80211_device *ieee)
{
@@ -924,7 +906,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
-
////////////////////////////////////////////////////////
// Configurations:
////////////////////////////////////////////////////////
@@ -957,7 +938,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK &&
(pPeerHTCap->DssCCk == 1);
-
//
// Config and configure A-MSDU setting
//
@@ -969,8 +949,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
else
pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
-
-
//
// Config A-MPDU setting
//
@@ -985,7 +963,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
-
} else {
// Set MPDU density to 2 to Realtek AP, and set it to 0 for others
// Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
@@ -1056,9 +1033,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// Config current operation mode.
//
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
-
-
-
}
void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
@@ -1103,8 +1077,6 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
-
-
// Initialize all of the parameters related to 11n
memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
@@ -1126,11 +1098,13 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
//MCS rate initialized here
{
u8 *RegHTSuppRateSets = &(ieee->RegHTSuppRateSet[0]);
+
RegHTSuppRateSets[0] = 0xFF; //support MCS 0~7
RegHTSuppRateSets[1] = 0xFF; //support MCS 8~15
RegHTSuppRateSets[4] = 0x01; //support MCS 32
}
}
+
/********************************************************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: PBSS_HT pBssHT //to be initialized
@@ -1140,7 +1114,6 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
********************************************************************************************************************/
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
-
pBssHT->bdSupportHT = false;
memset(pBssHT->bdHTCapBuf, 0, sizeof(pBssHT->bdHTCapBuf));
pBssHT->bdHTCapLen = 0;
@@ -1152,6 +1125,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
}
+
/********************************************************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
@@ -1213,7 +1187,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_ALL_2SS;
-
bIOTAction = HTIOTActIsDisableEDCATurbo(ieee, pNetwork->bssid);
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_EDCA_TURBO;
@@ -1225,8 +1198,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
bIOTAction = HTIOTActIsCCDFsync(pNetwork->bssid);
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
-
-
} else {
pHTInfo->bCurrentHTSupport = false;
pHTInfo->bCurrentRT2RTAggregation = false;
@@ -1234,7 +1205,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
pHTInfo->IOTAction = 0;
}
-
}
void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
@@ -1287,8 +1257,6 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
if (!pHTInfo->bRegBW40MHz)
return;
-
-
// To reduce dummy operation
// if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
// (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
--
2.17.0
Added spaces around various operators, as preferred by coding style.
Signed-off-by: John Whitmore <[email protected]>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 47b6add256d0..0db98c77a8e9 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -264,7 +264,7 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
is40MHz = (IsHTHalfNmode40Bandwidth(ieee)) ? 1 : 0;
isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz)) ? 1 : 0;
- return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
+ return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate & 0x7f)];
}
u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
@@ -275,7 +275,7 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
u8 isShortGI = (pHTInfo->bCurBW40MHz) ?
((pHTInfo->bCurShortGI40MHz) ? 1 : 0) :
((pHTInfo->bCurShortGI20MHz) ? 1 : 0);
- return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
+ return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate & 0x7f)];
}
/********************************************************************************************************************
@@ -317,7 +317,7 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
//nDataRate = nDataRate - 60;
}
- return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate&0xf];
+ return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate & 0xf];
}
}
@@ -823,15 +823,15 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
if (availableMcsRate[i] != 0) {
bitMap = availableMcsRate[i];
for (j = 0; j < 8; j++) {
- if ((bitMap%2) != 0) {
- if (HTMcsToDataRate(ieee, (8*i+j)) > HTMcsToDataRate(ieee, mcsRate))
- mcsRate = (8*i+j);
+ if ((bitMap % 2) != 0) {
+ if (HTMcsToDataRate(ieee, (8 * i + j)) > HTMcsToDataRate(ieee, mcsRate))
+ mcsRate = (8 * i + j);
}
bitMap >>= 1;
}
}
}
- return (mcsRate|0x80);
+ return (mcsRate | 0x80);
}
/*
@@ -850,7 +850,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// filter out operational rate set not supported by AP, the length of it is 16
for (i = 0; i <= 15; i++) {
- pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
+ pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i] & pSupportMCS[i];
}
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
@@ -909,7 +909,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
////////////////////////////////////////////////////////
// Configurations:
////////////////////////////////////////////////////////
- IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTCap, sizeof(HT_CAPABILITY_ELE));
+ IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, pPeerHTCap, sizeof(HT_CAPABILITY_ELE));
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE));
// Config Supported Channel Width setting
//
@@ -1303,9 +1303,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee)
if (pHTInfo->bCurBW40MHz) {
if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_UPPER)
- ieee->set_chan(ieee->dev, ieee->current_network.channel+2);
+ ieee->set_chan(ieee->dev, ieee->current_network.channel + 2);
else if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_LOWER)
- ieee->set_chan(ieee->dev, ieee->current_network.channel-2);
+ ieee->set_chan(ieee->dev, ieee->current_network.channel - 2);
else
ieee->set_chan(ieee->dev, ieee->current_network.channel);
--
2.17.0
Function HTIOTActIsDisableMCS14 contained spurious space at start of line.
Signed-off-by: John Whitmore <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 10d9c58680a2..981433f6c4f2 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -394,7 +394,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
- }
+}
/**
* Function: HTIOTActIsDisableMCS15
--
2.17.0
Return statments from void functions are not required by the coding standard.
Signed-off-by: John Whitmore <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 0db98c77a8e9..65b2cd692ec8 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -145,7 +145,6 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
- return;
}
/********************************************************************************************************************
@@ -207,7 +206,6 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tBasic MCS Rate Set = [%x][%x][%x][%x][%x]\n", pHTInfoEle->BasicMSC[0],\
pHTInfoEle->BasicMSC[1], pHTInfoEle->BasicMSC[2], pHTInfoEle->BasicMSC[3], pHTInfoEle->BasicMSC[4]);
- return;
}
/*
@@ -611,7 +609,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//Print each field in detail. Driver should not print out this message by default
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
- return;
}
/********************************************************************************************************************
@@ -661,7 +658,6 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTInfo, *len - 2);
//HTDebugHTInfo(posHTInfo, "HTConstructInforElement");
- return;
}
/*
--
2.17.0
> On 06 June 2018 at 12:39 John Whitmore <[email protected]> wrote:
> Again these are just some simple coding style changes to the file, so nothing
> of importance.
If it keeps grumpy maintainers happy, then it's of great importance! :-)
Justin
On Wed, Jun 06, 2018 at 12:40:03PM +0100, John Whitmore wrote:
> @@ -1072,10 +1072,10 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
> pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
>
> // Initialize all of the parameters related to 11n
> - memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
> - memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
> - memset((void *)(&(pHTInfo->PeerHTCapBuf)), 0, sizeof(pHTInfo->PeerHTCapBuf));
> - memset((void *)(&(pHTInfo->PeerHTInfoBuf)), 0, sizeof(pHTInfo->PeerHTInfoBuf));
> + memset((void *)(&pHTInfo->SelfHTCap), 0, sizeof(pHTInfo->SelfHTCap));
> + memset((void *)(&pHTInfo->SelfHTInfo), 0, sizeof(pHTInfo->SelfHTInfo));
> + memset((void *)(&pHTInfo->PeerHTCapBuf), 0, sizeof(pHTInfo->PeerHTCapBuf));
> + memset((void *)(&pHTInfo->PeerHTInfoBuf), 0, sizeof(pHTInfo->PeerHTInfoBuf));
You should write these like so:
memset(&pHTInfo->PeerHTInfoBuf, 0, sizeof(pHTInfo->PeerHTInfoBuf));
The first 7 patches look fine, but can you resend this last one?
regards,
dan carpenter
On Fri, Jun 08, 2018 at 03:18:51PM +0300, Dan Carpenter wrote:
> On Wed, Jun 06, 2018 at 12:40:03PM +0100, John Whitmore wrote:
> > @@ -1072,10 +1072,10 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
> > pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
> >
> > // Initialize all of the parameters related to 11n
> > - memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
> > - memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
> > - memset((void *)(&(pHTInfo->PeerHTCapBuf)), 0, sizeof(pHTInfo->PeerHTCapBuf));
> > - memset((void *)(&(pHTInfo->PeerHTInfoBuf)), 0, sizeof(pHTInfo->PeerHTInfoBuf));
> > + memset((void *)(&pHTInfo->SelfHTCap), 0, sizeof(pHTInfo->SelfHTCap));
> > + memset((void *)(&pHTInfo->SelfHTInfo), 0, sizeof(pHTInfo->SelfHTInfo));
> > + memset((void *)(&pHTInfo->PeerHTCapBuf), 0, sizeof(pHTInfo->PeerHTCapBuf));
> > + memset((void *)(&pHTInfo->PeerHTInfoBuf), 0, sizeof(pHTInfo->PeerHTInfoBuf));
>
> You should write these like so:
>
> memset(&pHTInfo->PeerHTInfoBuf, 0, sizeof(pHTInfo->PeerHTInfoBuf));
>
> The first 7 patches look fine, but can you resend this last one?
>
> regards,
> dan carpenter
>
I can certainly try. I've bumped it to v7 so here goes...
John
On Wed, Jun 06, 2018 at 12:39:55PM +0100, John Whitmore wrote:
> Version 6 : Sorry to send this out again but version 5 contained a little less
> verbosity then required.
>
> Again these are just some simple coding style changes to the file, so nothing
> of importance.
>
Received an automated email today to say that this series of patches was
merged into staging. Thank ye for that, and for your patience. Hopefully next
time conding style changes won't take me to such a high version. ;-)