This series adds a PHY driver for the Qualcomm Dakota SoC
Changes V1->V2
* fix the compat string inside the binding doc
* fix up the reset names inside the binding doc
* reflect the above changes in the driver and dts/i files
John Crispin (3):
dt-bindings: phy-qcom-ipq4019-usb: add binding document
phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
qcom: ipq4019: add USB devicetree nodes
.../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 +++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 76 ++++++++
drivers/phy/qualcomm/Kconfig | 7 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 193 +++++++++++++++++++++
6 files changed, 318 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
--
2.11.0
This patch adds the binding documentation for the HS/SS USB PHY found
inside Qualcomm Dakota SoCs.
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Signed-off-by: John Crispin <[email protected]>
---
.../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
new file mode 100644
index 000000000000..320a596c45b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
@@ -0,0 +1,21 @@
+Qualcom Dakota HS/SS USB PHY
+
+Required properties:
+ - compatible: "qcom,ipq4019-usb-ss-phy",
+ "qcom,ipq4019-usb-hs-phy"
+ - reg: offset and length of the registers
+ - #phy-cells: should be 0
+ - resets: the reset controllers as listed below
+ - reset-names: the names of the reset controllers
+ "por" - the POR reset line for SS and HS phys
+ "srif" - the SRIF reset line for HS phys
+Example:
+
+usb-phy@a8000 {
+ compatible = "qcom,ipq4019-usb-hs-phy";
+ phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ resets = <&gcc USB2_HSPHY_POR_ARES>,
+ <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por", "srif";
+};
--
2.11.0
This patch makes USB work on the Dakota EVB.
Signed-off-by: John Crispin <[email protected]>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 +++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 76 +++++++++++++++++++++++++++
2 files changed, 96 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 418f9a022336..0c226de1c672 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -109,5 +109,25 @@
wifi@a800000 {
status = "ok";
};
+
+ usb3_ss_phy: usb-phy@9a000 {
+ status = "ok";
+ };
+
+ usb3_hs_phy: usb-phy@a6000 {
+ status = "ok";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "ok";
+ };
+
+ usb2_hs_phy: usb-phy@a8000 {
+ status = "ok";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 4620beafa84d..2ef20749b446 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -553,5 +553,81 @@
"legacy";
status = "disabled";
};
+
+ usb3_ss_phy: usb-phy@9a000 {
+ compatible = "qcom,ipq4019-usb-ss-phy";
+ #phy-cells = <0>;
+ reg = <0x9a000 0x800>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+ reset-names = "por";
+ status = "disabled";
+ };
+
+ usb3_hs_phy: usb-phy@a6000 {
+ compatible = "qcom,ipq4019-usb-hs-phy";
+ #phy-cells = <0>;
+ reg = <0xa6000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_HSPHY_POR_ARES>,
+ <&gcc USB3_HSPHY_S_ARES>;
+ reset-names = "por", "srif";
+ status = "disabled";
+ };
+
+ usb3@8af8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x8af8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
+ <&gcc GCC_USB3_SLEEP_CLK>,
+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xf8000>;
+ interrupts = <0 132 0>;
+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ };
+ };
+
+ usb2_hs_phy: usb-phy@a8000 {
+ compatible = "qcom,ipq4019-usb-hs-phy";
+ #phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB2_HSPHY_POR_ARES>,
+ <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por", "srif";
+ status = "disabled";
+ };
+
+ usb2@60f8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x60f8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
+ <&gcc GCC_USB2_SLEEP_CLK>,
+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@6000000 {
+ compatible = "snps,dwc3";
+ reg = <0x6000000 0xf8000>;
+ interrupts = <0 136 0>;
+ phys = <&usb2_hs_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ };
+ };
};
};
--
2.11.0
Add a driver to setup the USB phy on Qualcom Dakota SoCs.
The driver sets up HS and SS phys. In case of HS some magic values need to
be written to magic offsets. These were taken from the SDK driver.
Signed-off-by: John Crispin <[email protected]>
---
drivers/phy/qualcomm/Kconfig | 7 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 193 ++++++++++++++++++++++++++++
3 files changed, 201 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 632a0e73ee10..41894904d708 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -17,6 +17,13 @@ config PHY_QCOM_APQ8064_SATA
depends on OF
select GENERIC_PHY
+config PHY_QCOM_IPQ4019_USB
+ tristate "Qualcomm IPQ4019 USB PHY module"
+ depends on OF && ARCH_QCOM
+ select GENERIC_PHY
+ help
+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets.
+
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index deb831f453ae..463383483cd4 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
new file mode 100644
index 000000000000..12f81789c37e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 John Crispin <[email protected]>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <http://www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/*
+ * Magic registers copied from the SDK driver code
+ */
+#define PHY_CTRL0_ADDR 0x000
+#define PHY_CTRL1_ADDR 0x004
+#define PHY_CTRL2_ADDR 0x008
+#define PHY_CTRL3_ADDR 0x00C
+#define PHY_CTRL4_ADDR 0x010
+#define PHY_MISC_ADDR 0x024
+#define PHY_IPG_ADDR 0x030
+
+#define PHY_CTRL0_VAL 0xA4600015
+#define PHY_CTRL1_VAL 0x09500000
+#define PHY_CTRL2_VAL 0x00058180
+#define PHY_CTRL3_VAL 0x6DB6DCD6
+#define PHY_CTRL4_VAL 0x836DB6DB
+#define PHY_MISC_VAL 0x3803FB0C
+#define PHY_IPG_VAL 0x47323232
+
+struct ipq4019_usb_phy {
+ struct device *dev;
+ struct phy *phy;
+ void __iomem *base;
+ struct reset_control *por_rst;
+ struct reset_control *srif_rst;
+};
+
+static int ipq4019_ss_phy_power_off(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ reset_control_assert(phy->por_rst);
+ msleep(20);
+
+ return 0;
+}
+
+static int ipq4019_ss_phy_power_on(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ ipq4019_ss_phy_power_off(_phy);
+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
+}
+
+static struct phy_ops ipq4019_usb_ss_phy_ops = {
+ .power_on = ipq4019_ss_phy_power_on,
+ .power_off = ipq4019_ss_phy_power_off,
+};
+
+static int ipq4019_hs_phy_power_off(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ reset_control_assert(phy->por_rst);
+ msleep(20);
+
+ reset_control_assert(phy->srif_rst);
+ msleep(20);
+
+ return 0;
+}
+
+static int ipq4019_hs_phy_power_on(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ ipq4019_hs_phy_power_off(_phy);
+
+ reset_control_deassert(phy->srif_rst);
+ msleep(20);
+
+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
+ msleep(20);
+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
+}
+
+static struct phy_ops ipq4019_usb_hs_phy_ops = {
+ .power_on = ipq4019_hs_phy_power_on,
+ .power_off = ipq4019_hs_phy_power_off,
+};
+
+static const struct of_device_id ipq4019_usb_phy_of_match[] = {
+ {
+ .compatible = "qcom,ipq4019-usb-hs-phy",
+ .data = &ipq4019_usb_hs_phy_ops
+ }, {
+ .compatible = "qcom,ipq4019-usb-ss-phy",
+ .data = &ipq4019_usb_ss_phy_ops
+ }, {
+ },
+};
+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
+
+static int ipq4019_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct ipq4019_usb_phy *phy;
+ const struct of_device_id *match;
+
+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = &pdev->dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->base)) {
+ dev_err(dev, "failed to remap register memory\n");
+ return PTR_ERR(phy->base);
+ }
+
+ phy->por_rst = devm_reset_control_get(phy->dev, "por");
+ if (IS_ERR(phy->por_rst)) {
+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
+ dev_err(dev, "POR reset is missing\n");
+ return PTR_ERR(phy->por_rst);
+ }
+
+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif");
+ if (IS_ERR(phy->srif_rst))
+ return PTR_ERR(phy->srif_rst);
+
+ phy->phy = devm_phy_create(dev, NULL, match->data);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy->phy);
+ }
+ phy_set_drvdata(phy->phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver ipq4019_usb_phy_driver = {
+ .probe = ipq4019_usb_phy_probe,
+ .driver = {
+ .of_match_table = ipq4019_usb_phy_of_match,
+ .name = "ipq4019-usb-phy",
+ }
+};
+module_platform_driver(ipq4019_usb_phy_driver);
+
+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
+MODULE_AUTHOR("John Crispin <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.11.0
On Wed, Aug 01, 2018 at 12:49:39PM +0200, John Crispin wrote:
> This patch adds the binding documentation for the HS/SS USB PHY found
> inside Qualcomm Dakota SoCs.
>
> Cc: Rob Herring <[email protected]>
> Cc: [email protected]
> Signed-off-by: John Crispin <[email protected]>
> ---
> .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
Reviewed-by: Rob Herring <[email protected]>