Coresight DT bindings have been updated to obey the DTS rules
for label/address matching for graph nodes. The changes are in
coresight/next tree scheduled for v4.20. This series updates the
in kernel dts to match the new bindings along with updating a couple
of new examples (e.,g CATU) in the Documentation (which were missed
as they were still in flight when we created the series).
Please note that this should not be pulled for v4.19, which I think
is a safe assumption. But please do pull it for v4.20.
The dt updates for the Juno boards were sent earlier with the original
DT update series and has been queued for v4.20.
Applies on coresight/next (which is based on v4.19) and should apply
cleanly on v4.19-rc3.
Changes since V1:
- Avoid "avoid_unnecessary_addr_size" warnings by removing
#address-cells/#size-cells for single port with address 0.
- Fix TPIU inport for qcom msm8196. (Leo Yan)
- Fix documentation example for TPIU (Leo Yan)
- Fix subject tags (as pointed out by Leo and Shawn)
- Drop patch for TC2, which has been queued by Sudeep
Cc: Alexandre Belloni <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: Benoît Cousson <[email protected]>
Cc: David Brown <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Frank Rowand <[email protected]>
Cc: Ivan T. Ivanov <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Liviu Dudau <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: [email protected]
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Wei Xu <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Suzuki K Poulose (11):
coresight: dts: binding: Fix example for TPIU component
coresight: dts: binding: Update coresight binding examples
arm64: dts: hi6220: Update coresight bindings for hardware ports
arm64: dts: sc9836/sc9860: Update coresight bindings for hardware
ports
arm64: dts: msm8916: Update coresight bindings for hardware ports
arm: dts: hip04: Update coresight bindings for hardware ports
arm: dts: imx7: Update coresight binding for hardware ports
arm: dts: omap: Update coresight bindings for hardware ports
arm: dts: qcom: Update coresight bindings for hardware ports
arm: dts: sama5d2: Update coresight bindings for hardware ports
arm: dts: ste-dbx5x0: Update coresight bindings for hardware port
.../devicetree/bindings/arm/coresight.txt | 27 +-
arch/arm/boot/dts/hip04.dtsi | 346 +++++++++---------
arch/arm/boot/dts/imx7d.dtsi | 14 +-
arch/arm/boot/dts/imx7s.dtsi | 82 ++---
arch/arm/boot/dts/omap3-beagle-xm.dts | 17 +-
arch/arm/boot/dts/omap3-beagle.dts | 17 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 71 ++--
arch/arm/boot/dts/qcom-msm8974.dtsi | 104 +++---
arch/arm/boot/dts/sama5d2.dtsi | 17 +-
arch/arm/boot/dts/ste-dbx5x0.dtsi | 65 ++--
.../boot/dts/hisilicon/hi6220-coresight.dtsi | 181 +++++----
arch/arm64/boot/dts/qcom/msm8916.dtsi | 95 ++---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 82 +++--
arch/arm64/boot/dts/sprd/sc9860.dtsi | 215 +++++------
14 files changed, 682 insertions(+), 651 deletions(-)
--
2.19.0
Switch to the new coresight bindings for hw ports
Cc: [email protected]
Cc: [email protected]
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 82 +++++-----
arch/arm64/boot/dts/sprd/sc9860.dtsi | 215 ++++++++++++++-------------
2 files changed, 153 insertions(+), 144 deletions(-)
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index 63894c456969..4bcdbb709c01 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -50,10 +50,11 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etf_in: endpoint {
- slave-mode;
- remote-endpoint = <&funnel_out_port0>;
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel_out_port0>;
+ };
};
};
};
@@ -63,55 +64,50 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- ports {
+
+ out-ports {
+ port {
+ funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
- reg = <0>;
- funnel_out_port0: endpoint {
- remote-endpoint = <&etf_in>;
- };
- };
-
- /* funnel input port 0-4 */
- port@1 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&stm_out>;
};
};
@@ -126,9 +122,11 @@
cpu = <&cpu0>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -140,9 +138,11 @@
cpu = <&cpu1>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -154,9 +154,11 @@
cpu = <&cpu2>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -168,9 +170,11 @@
cpu = <&cpu3>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
};
@@ -182,9 +186,11 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- stm_out: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 48f5928ed45c..5f57bf055cde 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -304,30 +304,29 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
soc_funnel_out_port: endpoint {
remote-endpoint = <&etb_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
soc_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&main_funnel_out_port>;
};
};
- port@2 {
+ port@4 {
reg = <4>;
soc_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&stm_out_port>;
};
@@ -340,11 +339,12 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint =
- <&soc_funnel_out_port>;
+ out-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
};
};
};
@@ -356,10 +356,12 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint =
- <&soc_funnel_in_port1>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
};
};
};
@@ -369,38 +371,36 @@
reg = <0 0x11001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_funnel_out_port: endpoint {
remote-endpoint =
<&cluster0_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster0_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
@@ -408,7 +408,6 @@
port@4 {
reg = <4>;
cluster0_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
@@ -420,46 +419,43 @@
reg = <0 0x11002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_funnel_out_port: endpoint {
remote-endpoint =
<&cluster1_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm4_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm5_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm6_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm7_out>;
};
};
@@ -472,22 +468,18 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_etf_out: endpoint {
remote-endpoint =
<&main_funnel_in_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
cluster0_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_funnel_out_port>;
};
@@ -501,22 +493,18 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_etf_out: endpoint {
remote-endpoint =
<&main_funnel_in_port1>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
cluster1_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_funnel_out_port>;
};
@@ -530,31 +518,30 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
main_funnel_out_port: endpoint {
remote-endpoint =
<&soc_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_etf_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_etf_out>;
};
@@ -569,10 +556,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
};
};
};
@@ -584,10 +573,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
};
};
};
@@ -599,10 +590,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
};
};
};
@@ -614,10 +607,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
};
};
};
@@ -629,10 +624,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
};
};
};
@@ -644,10 +641,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
};
};
};
@@ -659,10 +658,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
};
};
};
@@ -674,10 +675,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
};
};
};
--
2.19.0
Switch to the new coresight bindings
Cc: Linus Walleij <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 65 ++++++++++++++++---------------
1 file changed, 33 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..7f94b5a53205 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -67,9 +67,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -81,9 +83,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -94,32 +98,29 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output ports */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
@@ -131,11 +132,10 @@
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
@@ -148,12 +148,11 @@
remote-endpoint = <&etb_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
@@ -166,10 +165,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
@@ -180,10 +180,11 @@
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
--
2.19.0
Switch to the new coresight bindings for hardware ports
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm/boot/dts/sama5d2.dtsi | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..f0fd2b1c04ba 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -84,10 +84,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -99,9 +100,11 @@
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
--
2.19.0
Switch to updated coresight bindings for hw ports
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: Ivan T. Ivanov <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
Changes since v1:
- Fixed TPIU port direction
- Use better subject tag for the patch
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 95 ++++++++++++++-------------
1 file changed, 51 insertions(+), 44 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b8990d62..fe375a9c218e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1099,10 +1099,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1114,7 +1115,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1132,12 +1133,13 @@
port@4 {
reg = <4>;
funnel0_in4: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
};
@@ -1152,7 +1154,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1168,10 +1170,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -1185,19 +1188,16 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
@@ -1212,10 +1212,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1227,40 +1228,38 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel1_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel1_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel1_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel1_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@4 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
};
@@ -1309,9 +1308,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
};
};
};
@@ -1325,9 +1326,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
};
};
};
@@ -1341,9 +1344,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
};
};
@@ -1357,9 +1362,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
--
2.19.0
Switch to the new hardware port bindings for coresight
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 71 ++++++++++---------
arch/arm/boot/dts/qcom-msm8974.dtsi | 104 +++++++++++++++-------------
2 files changed, 96 insertions(+), 79 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4a99c9255104..48c3cf427610 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1611,10 +1611,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -1626,10 +1627,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -1640,7 +1642,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1656,10 +1658,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out>;
};
};
@@ -1673,7 +1676,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1687,33 +1690,31 @@
port@0 {
reg = <0>;
funnel_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@4 {
reg = <4>;
funnel_in4: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@5 {
reg = <5>;
funnel_in5: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
};
@@ -1730,9 +1731,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
};
};
};
@@ -1746,9 +1749,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
};
};
};
@@ -1762,9 +1767,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in4>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
};
};
};
@@ -1778,9 +1785,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in5>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a49b292..3a4fb513a088 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -770,10 +770,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
@@ -785,10 +786,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
@@ -800,7 +802,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -816,10 +818,11 @@
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
@@ -833,20 +836,17 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
@@ -860,7 +860,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -873,12 +873,13 @@
port@1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
@@ -893,7 +894,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -910,12 +911,13 @@
port@5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
@@ -930,40 +932,38 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
@@ -980,9 +980,11 @@
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
@@ -996,9 +998,11 @@
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
@@ -1012,9 +1016,11 @@
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
@@ -1028,9 +1034,11 @@
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
};
};
--
2.19.0
Switch to the new coresight bindings for hardware ports
Cc: [email protected]
Cc: "Benoît Cousson" <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 17 ++++++++++-------
arch/arm/boot/dts/omap3-beagle.dts | 17 ++++++++++-------
2 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index d80587de0bbf..9985ee2aae0c 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -160,10 +160,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -174,9 +175,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ca8991a6c3e..91bb50ad9a4f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -147,10 +147,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
@@ -161,9 +162,11 @@
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
--
2.19.0
Switch to the updated coresight bindings.
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm/boot/dts/imx7d.dtsi | 14 +++---
arch/arm/boot/dts/imx7s.dtsi | 82 ++++++++++++++++--------------------
2 files changed, 46 insertions(+), 50 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7cbc2ffa4b3a..a96d031ad46c 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -63,9 +63,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
@@ -148,11 +150,13 @@
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a052198f6e96..b65cfc6a8841 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -106,7 +106,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
@@ -123,12 +123,11 @@
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
@@ -168,28 +167,23 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port@0 {
- reg = <0>;
+ ca_funnel_in_ports: in-ports {
+ port {
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port@2 {
- reg = <0>;
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ port {
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
@@ -200,9 +194,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
@@ -213,15 +209,13 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port@0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
@@ -229,18 +223,18 @@
port@1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port@2 {
- reg = <0>;
+ out-ports {
+ port {
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
@@ -250,20 +244,16 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
@@ -277,10 +267,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
@@ -291,10 +282,11 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
--
2.19.0
Switch to updated coresight bindings for hw ports.
Cc: [email protected]
Cc: [email protected]
Cc: Mathieu Poirier <[email protected]>
Tested-by: Leo Yan <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
.../boot/dts/hisilicon/hi6220-coresight.dtsi | 181 +++++++++---------
1 file changed, 86 insertions(+), 95 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
index 7afee5d5087b..68c52f1149be 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -20,22 +20,18 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
soc_funnel_out: endpoint {
remote-endpoint =
<&etf_in>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
soc_funnel_in: endpoint {
- slave-mode;
remote-endpoint =
<&acpu_funnel_out>;
};
@@ -49,21 +45,17 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&soc_funnel_out>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint =
<&replicator_in>;
@@ -77,20 +69,20 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint =
<&etf_out>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint =
@@ -98,7 +90,7 @@
};
};
- port@2 {
+ port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint =
@@ -114,14 +106,9 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out0>;
};
@@ -135,14 +122,9 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
tpiu_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out1>;
};
@@ -156,85 +138,78 @@
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
acpu_funnel_out: endpoint {
remote-endpoint =
<&soc_funnel_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
acpu_funnel_in0: endpoint {
- slave-mode;
remote-endpoint =
<&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
acpu_funnel_in1: endpoint {
- slave-mode;
remote-endpoint =
<&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
acpu_funnel_in2: endpoint {
- slave-mode;
remote-endpoint =
<&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
acpu_funnel_in3: endpoint {
- slave-mode;
remote-endpoint =
<&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
acpu_funnel_in4: endpoint {
- slave-mode;
remote-endpoint =
<&etm4_out>;
};
};
- port@6 {
+ port@5 {
reg = <5>;
acpu_funnel_in5: endpoint {
- slave-mode;
remote-endpoint =
<&etm5_out>;
};
};
- port@7 {
+ port@6 {
reg = <6>;
acpu_funnel_in6: endpoint {
- slave-mode;
remote-endpoint =
<&etm6_out>;
};
};
- port@8 {
+ port@7 {
reg = <7>;
acpu_funnel_in7: endpoint {
- slave-mode;
remote-endpoint =
<&etm7_out>;
};
@@ -251,10 +226,12 @@
cpu = <&cpu0>;
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in0>;
+ };
};
};
};
@@ -268,10 +245,12 @@
cpu = <&cpu1>;
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in1>;
+ };
};
};
};
@@ -285,10 +264,12 @@
cpu = <&cpu2>;
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in2>;
+ };
};
};
};
@@ -302,10 +283,12 @@
cpu = <&cpu3>;
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in3>;
+ };
};
};
};
@@ -319,10 +302,12 @@
cpu = <&cpu4>;
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in4>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in4>;
+ };
};
};
};
@@ -336,10 +321,12 @@
cpu = <&cpu5>;
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in5>;
+ };
};
};
};
@@ -353,10 +340,12 @@
cpu = <&cpu6>;
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in6>;
+ };
};
};
};
@@ -370,10 +359,12 @@
cpu = <&cpu7>;
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in7>;
+ };
};
};
};
--
2.19.0
While we updated the coresight DT bindings, some of the
new examples were not updated due to the order in which they
were merged. Let us update all the missed out ones to the
new bindings to avoid confusion.
Cc: Mathieu Poirier <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Frank Rowand <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
.../devicetree/bindings/arm/coresight.txt | 25 ++++++++-----------
1 file changed, 10 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 13b6198ce01c..f8aff65ab921 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -147,22 +147,16 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in_port: endpoint {
- slave-mode;
remote-endpoint = <&replicator2_out_port0>;
};
};
+ };
- /* CATU link represented by output port */
- port@1 {
- reg = <1>;
+ out-ports {
+ port {
etr_out_port: endpoint {
remote-endpoint = <&catu_in_port>;
};
@@ -310,10 +304,11 @@ Example:
clock-names = "apb_pclk";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- port {
- catu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&etr_out_port>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
};
};
};
--
2.19.0
TPIU component has an input port. The example uses out-ports
which is wrong. Let us fix it.
Reported-by: Leo Yan <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
Documentation/devicetree/bindings/arm/coresight.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index f39d2c6eb49c..13b6198ce01c 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -132,7 +132,7 @@ Example:
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
- out-ports {
+ in-ports {
port {
tpiu_in_port: endpoint@0 {
remote-endpoint = <&replicator_out_port1>;
--
2.19.0
Switch to the new the hardware port bindings.
Cc: Wei Xu <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
---
arch/arm/boot/dts/hip04.dtsi | 346 ++++++++++++++++++-----------------
1 file changed, 176 insertions(+), 170 deletions(-)
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f275115..0f917b272ff3 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -277,10 +277,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb0_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator0_out_port0>;
+ in-ports {
+ port {
+ etb0_in_port: endpoint@0 {
+ remote-endpoint = <&replicator0_out_port0>;
+ };
};
};
};
@@ -291,10 +292,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb1_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator1_out_port0>;
+ in-ports {
+ port {
+ etb1_in_port: endpoint@0 {
+ remote-endpoint = <&replicator1_out_port0>;
+ };
};
};
};
@@ -305,10 +307,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb2_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator2_out_port0>;
+ in-ports {
+ port {
+ etb2_in_port: endpoint@0 {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
};
};
};
@@ -319,10 +322,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb3_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator3_out_port0>;
+ in-ports {
+ port {
+ etb3_in_port: endpoint@0 {
+ remote-endpoint = <&replicator3_out_port0>;
+ };
};
};
};
@@ -333,10 +337,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&funnel4_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
};
};
};
@@ -347,7 +352,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -365,12 +370,11 @@
remote-endpoint = <&funnel4_in_port0>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
@@ -383,7 +387,7 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -401,12 +405,11 @@
remote-endpoint = <&funnel4_in_port1>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
@@ -419,11 +422,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator2_out_port0: endpoint {
@@ -437,12 +439,11 @@
remote-endpoint = <&funnel4_in_port2>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
@@ -455,11 +456,10 @@
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator3_out_port0: endpoint {
@@ -473,12 +473,11 @@
remote-endpoint = <&funnel4_in_port3>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
@@ -491,48 +490,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel0_out_port0: endpoint {
remote-endpoint =
<&replicator0_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel0_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel0_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel0_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
@@ -545,48 +539,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel1_out_port0: endpoint {
remote-endpoint =
<&replicator1_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel1_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel1_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel1_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
@@ -599,48 +588,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel2_out_port0: endpoint {
remote-endpoint =
<&replicator2_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel2_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel2_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel2_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
@@ -653,48 +637,43 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel3_out_port0: endpoint {
remote-endpoint =
<&replicator3_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel3_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel3_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel3_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
@@ -707,50 +686,45 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel4_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel4_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel4_in_port2: endpoint {
- slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel4_in_port3: endpoint {
- slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
@@ -765,9 +739,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
};
};
};
@@ -779,9 +755,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
};
};
};
@@ -793,9 +771,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
- port {
- ptm2_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port2>;
+ out-ports {
+ port {
+ ptm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
};
};
};
@@ -807,9 +787,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
- port {
- ptm3_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port3>;
+ out-ports {
+ port {
+ ptm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
};
};
};
@@ -821,9 +803,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
- port {
- ptm4_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port0>;
+ out-ports {
+ port {
+ ptm4_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port0>;
+ };
};
};
};
@@ -835,9 +819,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
- port {
- ptm5_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port1>;
+ out-ports {
+ port {
+ ptm5_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port1>;
+ };
};
};
};
@@ -849,9 +835,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
- port {
- ptm6_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port2>;
+ out-ports {
+ port {
+ ptm6_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port2>;
+ };
};
};
};
@@ -863,9 +851,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
- port {
- ptm7_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port3>;
+ out-ports {
+ port {
+ ptm7_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port3>;
+ };
};
};
};
@@ -877,9 +867,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
- port {
- ptm8_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port0>;
+ out-ports {
+ port {
+ ptm8_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port0>;
+ };
};
};
};
@@ -890,9 +882,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
- port {
- ptm9_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port1>;
+ out-ports {
+ port {
+ ptm9_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port1>;
+ };
};
};
};
@@ -904,9 +898,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
- port {
- ptm10_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port2>;
+ out-ports {
+ port {
+ ptm10_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port2>;
+ };
};
};
};
@@ -918,9 +914,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
- port {
- ptm11_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port3>;
+ out-ports {
+ port {
+ ptm11_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port3>;
+ };
};
};
};
@@ -932,9 +930,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
- port {
- ptm12_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port0>;
+ out-ports {
+ port {
+ ptm12_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port0>;
+ };
};
};
};
@@ -946,9 +946,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
- port {
- ptm13_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port1>;
+ out-ports {
+ port {
+ ptm13_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port1>;
+ };
};
};
};
@@ -960,9 +962,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
- port {
- ptm14_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port2>;
+ out-ports {
+ port {
+ ptm14_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port2>;
+ };
};
};
};
@@ -974,9 +978,11 @@
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
- port {
- ptm15_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port3>;
+ out-ports {
+ port {
+ ptm15_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port3>;
+ };
};
};
};
--
2.19.0
On Wed, Sep 12, 2018 at 3:54 PM Suzuki K Poulose <[email protected]> wrote:
> Switch to the new coresight bindings
>
> Cc: Linus Walleij <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
Acked-by: Linus Walleij <[email protected]>
I guess you will merge this with the rest of the patches so I do
not need to queue it?
Yours,
Linus Walleij
Hi Linus,
On 14/09/18 09:43, Linus Walleij wrote:
> On Wed, Sep 12, 2018 at 3:54 PM Suzuki K Poulose <[email protected]> wrote:
>
>> Switch to the new coresight bindings
>>
>> Cc: Linus Walleij <[email protected]>
>> Cc: Mathieu Poirier <[email protected]>
>> Signed-off-by: Suzuki K Poulose <[email protected]>
>
> Acked-by: Linus Walleij <[email protected]>
>
Thanks.
> I guess you will merge this with the rest of the patches so I do
> not need to queue it?
We haven't figured out that yet. I guess it would be ideal if we
could merge this via arm-soc ? To avoid possible conflict with
other changes to the dts in the series. Sudeep has queued the
TC2 and Juno changes. So, if you could queue it, that is fine
with us.
Suzuki
On 12/09/2018 14:53:51+0100, Suzuki K Poulose wrote:
> Switch to the new coresight bindings for hardware ports
>
> Cc: Nicolas Ferre <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
> ---
> arch/arm/boot/dts/sama5d2.dtsi | 17 ++++++++++-------
> 1 file changed, 10 insertions(+), 7 deletions(-)
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
* Suzuki K Poulose <[email protected]> [180912 06:58]:
> Switch to the new coresight bindings for hardware ports
>
> Cc: [email protected]
> Cc: "Benoît Cousson" <[email protected]>
> Cc: Tony Lindgren <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
> ---
> arch/arm/boot/dts/omap3-beagle-xm.dts | 17 ++++++++++-------
> arch/arm/boot/dts/omap3-beagle.dts | 17 ++++++++++-------
> 2 files changed, 20 insertions(+), 14 deletions(-)
Thanks applying this into omap-for-v4.20/dt.
Tony
On Wed, Sep 12, 2018 at 6:54 AM Suzuki K Poulose <[email protected]> wrote:
> Switch to the new coresight bindings
>
> Cc: Linus Walleij <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
Applied to the ux500 tree.
Yours,
Linus Walleij
Linus,
On 20/09/18 23:02, Linus Walleij wrote:
> On Wed, Sep 12, 2018 at 6:54 AM Suzuki K Poulose <[email protected]> wrote:
>
>> Switch to the new coresight bindings
>>
>> Cc: Linus Walleij <[email protected]>
>> Cc: Mathieu Poirier <[email protected]>
>> Signed-off-by: Suzuki K Poulose <[email protected]>
>
> Applied to the ux500 tree.
Thanks !
Suzuki
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
On Wed, Sep 12, 2018 at 02:53:48PM +0100, Suzuki K Poulose wrote:
> Switch to the updated coresight bindings.
>
> Cc: Shawn Guo <[email protected]>
> Cc: Sascha Hauer <[email protected]>
> Cc: Pengutronix Kernel Team <[email protected]>
> Cc: Fabio Estevam <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
Applied, thanks.
On Wed, 12 Sep 2018 14:53:42 +0100, Suzuki K Poulose wrote:
> TPIU component has an input port. The example uses out-ports
> which is wrong. Let us fix it.
>
> Reported-by: Leo Yan <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/coresight.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <[email protected]>
Hi Andy
On 09/12/2018 02:53 PM, Suzuki K Poulose wrote:
> Switch to updated coresight bindings for hw ports
>
> Cc: Andy Gross <[email protected]>
> Cc: David Brown <[email protected]>
> Cc: Ivan T. Ivanov <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
> ---
> Changes since v1:
> - Fixed TPIU port direction
> - Use better subject tag for the patch
> ---
Please could you pull this and the patch for ARM (Patch 9/11) ?
Suzuki
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 95 ++++++++++++++-------------
> 1 file changed, 51 insertions(+), 44 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 7b32b8990d62..fe375a9c218e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1099,10 +1099,11 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - port {
> - tpiu_in: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out1>;
> + in-ports {
> + port {
> + tpiu_in: endpoint {
> + remote-endpoint = <&replicator_out1>;
> + };
> };
> };
> };
> @@ -1114,7 +1115,7 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - ports {
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -1132,12 +1133,13 @@
> port@4 {
> reg = <4>;
> funnel0_in4: endpoint {
> - slave-mode;
> remote-endpoint = <&funnel1_out>;
> };
> };
> - port@8 {
> - reg = <0>;
> + };
> +
> + out-ports {
> + port {
> funnel0_out: endpoint {
> remote-endpoint = <&etf_in>;
> };
> @@ -1152,7 +1154,7 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -1168,10 +1170,11 @@
> remote-endpoint = <&tpiu_in>;
> };
> };
> - port@2 {
> - reg = <0>;
> + };
> +
> + in-ports {
> + port {
> replicator_in: endpoint {
> - slave-mode;
> remote-endpoint = <&etf_out>;
> };
> };
> @@ -1185,19 +1188,16 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + in-ports {
> + port {
> etf_in: endpoint {
> - slave-mode;
> remote-endpoint = <&funnel0_out>;
> };
> };
> - port@1 {
> - reg = <0>;
> + };
> +
> + out-ports {
> + port {
> etf_out: endpoint {
> remote-endpoint = <&replicator_in>;
> };
> @@ -1212,10 +1212,11 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - port {
> - etr_in: endpoint {
> - slave-mode;
> - remote-endpoint = <&replicator_out0>;
> + in-ports {
> + port {
> + etr_in: endpoint {
> + remote-endpoint = <&replicator_out0>;
> + };
> };
> };
> };
> @@ -1227,40 +1228,38 @@
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> - ports {
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> port@0 {
> reg = <0>;
> funnel1_in0: endpoint {
> - slave-mode;
> remote-endpoint = <&etm0_out>;
> };
> };
> port@1 {
> reg = <1>;
> funnel1_in1: endpoint {
> - slave-mode;
> remote-endpoint = <&etm1_out>;
> };
> };
> port@2 {
> reg = <2>;
> funnel1_in2: endpoint {
> - slave-mode;
> remote-endpoint = <&etm2_out>;
> };
> };
> port@3 {
> reg = <3>;
> funnel1_in3: endpoint {
> - slave-mode;
> remote-endpoint = <&etm3_out>;
> };
> };
> - port@4 {
> - reg = <0>;
> + };
> +
> + out-ports {
> + port {
> funnel1_out: endpoint {
> remote-endpoint = <&funnel0_in4>;
> };
> @@ -1309,9 +1308,11 @@
>
> cpu = <&CPU0>;
>
> - port {
> - etm0_out: endpoint {
> - remote-endpoint = <&funnel1_in0>;
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&funnel1_in0>;
> + };
> };
> };
> };
> @@ -1325,9 +1326,11 @@
>
> cpu = <&CPU1>;
>
> - port {
> - etm1_out: endpoint {
> - remote-endpoint = <&funnel1_in1>;
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&funnel1_in1>;
> + };
> };
> };
> };
> @@ -1341,9 +1344,11 @@
>
> cpu = <&CPU2>;
>
> - port {
> - etm2_out: endpoint {
> - remote-endpoint = <&funnel1_in2>;
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&funnel1_in2>;
> + };
> };
> };
> };
> @@ -1357,9 +1362,11 @@
>
> cpu = <&CPU3>;
>
> - port {
> - etm3_out: endpoint {
> - remote-endpoint = <&funnel1_in3>;
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&funnel1_in3>;
> + };
> };
> };
> };
>
+To: Chunyan Zhang
Chunyan Zhang,
On 09/12/2018 02:53 PM, Suzuki K Poulose wrote:
> Switch to the new coresight bindings for hw ports
>
How can we push this patch ? Do you generally send the spreadtrum
specific changes to ARM soc folks ? Or would you like me to post
this directly to ARM soc folks ?
Suzuki
> Cc: [email protected]
> Cc: [email protected]
> Cc: Mathieu Poirier <[email protected]>
> Signed-off-by: Suzuki K Poulose <[email protected]>
> ---
> arch/arm64/boot/dts/sprd/sc9836.dtsi | 82 +++++-----
> arch/arm64/boot/dts/sprd/sc9860.dtsi | 215 ++++++++++++++-------------
> 2 files changed, 153 insertions(+), 144 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
> index 63894c456969..4bcdbb709c01 100644
> --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
> +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
> @@ -50,10 +50,11 @@
> reg = <0 0x10003000 0 0x1000>;
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - port {
> - etf_in: endpoint {
> - slave-mode;
> - remote-endpoint = <&funnel_out_port0>;
> + in-ports {
> + port {
> + etf_in: endpoint {
> + remote-endpoint = <&funnel_out_port0>;
> + };
> };
> };
> };
> @@ -63,55 +64,50 @@
> reg = <0 0x10001000 0 0x1000>;
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - ports {
> +
> + out-ports {
> + port {
> + funnel_out_port0: endpoint {
> + remote-endpoint = <&etf_in>;
> + };
> + };
> + };
> +
> + in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* funnel output port */
> port@0 {
> - reg = <0>;
> - funnel_out_port0: endpoint {
> - remote-endpoint = <&etf_in>;
> - };
> - };
> -
> - /* funnel input port 0-4 */
> - port@1 {
> reg = <0>;
> funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etm0_out>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&etm1_out>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> funnel_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&etm2_out>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> funnel_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&etm3_out>;
> };
> };
>
> - port@5 {
> + port@4 {
> reg = <4>;
> funnel_in_port4: endpoint {
> - slave-mode;
> remote-endpoint = <&stm_out>;
> };
> };
> @@ -126,9 +122,11 @@
> cpu = <&cpu0>;
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - port {
> - etm0_out: endpoint {
> - remote-endpoint = <&funnel_in_port0>;
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&funnel_in_port0>;
> + };
> };
> };
> };
> @@ -140,9 +138,11 @@
> cpu = <&cpu1>;
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - port {
> - etm1_out: endpoint {
> - remote-endpoint = <&funnel_in_port1>;
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&funnel_in_port1>;
> + };
> };
> };
> };
> @@ -154,9 +154,11 @@
> cpu = <&cpu2>;
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - port {
> - etm2_out: endpoint {
> - remote-endpoint = <&funnel_in_port2>;
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&funnel_in_port2>;
> + };
> };
> };
> };
> @@ -168,9 +170,11 @@
> cpu = <&cpu3>;
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - port {
> - etm3_out: endpoint {
> - remote-endpoint = <&funnel_in_port3>;
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&funnel_in_port3>;
> + };
> };
> };
> };
> @@ -182,9 +186,11 @@
> reg-names = "stm-base", "stm-stimulus-base";
> clocks = <&clk26mhz>;
> clock-names = "apb_pclk";
> - port {
> - stm_out: endpoint {
> - remote-endpoint = <&funnel_in_port4>;
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint = <&funnel_in_port4>;
> + };
> };
> };
> };
> diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> index 48f5928ed45c..5f57bf055cde 100644
> --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
> +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> @@ -304,30 +304,29 @@
> reg = <0 0x10001000 0 0x1000>;
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> soc_funnel_out_port: endpoint {
> remote-endpoint = <&etb_in>;
> };
> };
> + };
>
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> soc_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint =
> <&main_funnel_out_port>;
> };
> };
>
> - port@2 {
> + port@4 {
> reg = <4>;
> soc_funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint =
> <&stm_out_port>;
> };
> @@ -340,11 +339,12 @@
> reg = <0 0x10003000 0 0x1000>;
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
> - port {
> - etb_in: endpoint {
> - slave-mode;
> - remote-endpoint =
> - <&soc_funnel_out_port>;
> + out-ports {
> + port {
> + etb_in: endpoint {
> + remote-endpoint =
> + <&soc_funnel_out_port>;
> + };
> };
> };
> };
> @@ -356,10 +356,12 @@
> reg-names = "stm-base", "stm-stimulus-base";
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
> - port {
> - stm_out_port: endpoint {
> - remote-endpoint =
> - <&soc_funnel_in_port1>;
> + out-ports {
> + port {
> + stm_out_port: endpoint {
> + remote-endpoint =
> + <&soc_funnel_in_port1>;
> + };
> };
> };
> };
> @@ -369,38 +371,36 @@
> reg = <0 0x11001000 0 0x1000>;
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> cluster0_funnel_out_port: endpoint {
> remote-endpoint =
> <&cluster0_etf_in>;
> };
> };
> + };
>
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> cluster0_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etm0_out>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> cluster0_funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&etm1_out>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> cluster0_funnel_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&etm2_out>;
> };
> };
> @@ -408,7 +408,6 @@
> port@4 {
> reg = <4>;
> cluster0_funnel_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&etm3_out>;
> };
> };
> @@ -420,46 +419,43 @@
> reg = <0 0x11002000 0 0x1000>;
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> cluster1_funnel_out_port: endpoint {
> remote-endpoint =
> <&cluster1_etf_in>;
> };
> };
> + };
>
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> cluster1_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&etm4_out>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> cluster1_funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&etm5_out>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> cluster1_funnel_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&etm6_out>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> cluster1_funnel_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&etm7_out>;
> };
> };
> @@ -472,22 +468,18 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> cluster0_etf_out: endpoint {
> remote-endpoint =
> <&main_funnel_in_port0>;
> };
> };
> + };
>
> - port@1 {
> - reg = <0>;
> + in-ports {
> + port {
> cluster0_etf_in: endpoint {
> - slave-mode;
> remote-endpoint =
> <&cluster0_funnel_out_port>;
> };
> @@ -501,22 +493,18 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> cluster1_etf_out: endpoint {
> remote-endpoint =
> <&main_funnel_in_port1>;
> };
> };
> + };
>
> - port@1 {
> - reg = <0>;
> + in-ports {
> + port {
> cluster1_etf_in: endpoint {
> - slave-mode;
> remote-endpoint =
> <&cluster1_funnel_out_port>;
> };
> @@ -530,31 +518,30 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> main_funnel_out_port: endpoint {
> remote-endpoint =
> <&soc_funnel_in_port0>;
> };
> };
> + };
>
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> main_funnel_in_port0: endpoint {
> - slave-mode;
> remote-endpoint =
> <&cluster0_etf_out>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> main_funnel_in_port1: endpoint {
> - slave-mode;
> remote-endpoint =
> <&cluster1_etf_out>;
> };
> @@ -569,10 +556,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm0_out: endpoint {
> - remote-endpoint =
> - <&cluster0_funnel_in_port0>;
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port0>;
> + };
> };
> };
> };
> @@ -584,10 +573,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm1_out: endpoint {
> - remote-endpoint =
> - <&cluster0_funnel_in_port1>;
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port1>;
> + };
> };
> };
> };
> @@ -599,10 +590,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm2_out: endpoint {
> - remote-endpoint =
> - <&cluster0_funnel_in_port2>;
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port2>;
> + };
> };
> };
> };
> @@ -614,10 +607,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm3_out: endpoint {
> - remote-endpoint =
> - <&cluster0_funnel_in_port3>;
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port3>;
> + };
> };
> };
> };
> @@ -629,10 +624,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm4_out: endpoint {
> - remote-endpoint =
> - <&cluster1_funnel_in_port0>;
> + out-ports {
> + port {
> + etm4_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port0>;
> + };
> };
> };
> };
> @@ -644,10 +641,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm5_out: endpoint {
> - remote-endpoint =
> - <&cluster1_funnel_in_port1>;
> + out-ports {
> + port {
> + etm5_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port1>;
> + };
> };
> };
> };
> @@ -659,10 +658,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm6_out: endpoint {
> - remote-endpoint =
> - <&cluster1_funnel_in_port2>;
> + out-ports {
> + port {
> + etm6_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port2>;
> + };
> };
> };
> };
> @@ -674,10 +675,12 @@
> clocks = <&ext_26m>;
> clock-names = "apb_pclk";
>
> - port {
> - etm7_out: endpoint {
> - remote-endpoint =
> - <&cluster1_funnel_in_port3>;
> + out-ports {
> + port {
> + etm7_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port3>;
> + };
> };
> };
> };
>
Hi Suzuki,
On 27 September 2018 at 16:51, Suzuki K Poulose <[email protected]> wrote:
> +To: Chunyan Zhang
>
> Chunyan Zhang,
>
> On 09/12/2018 02:53 PM, Suzuki K Poulose wrote:
>>
>> Switch to the new coresight bindings for hw ports
>>
>
> How can we push this patch ? Do you generally send the spreadtrum
> specific changes to ARM soc folks ? Or would you like me to post
> this directly to ARM soc folks ?
Yeah, at present sprd dts files generally got merged through arm-soc
(I've added [email protected]).
Thanks,
Chunyan
>
> Suzuki
>
>
>> Cc: [email protected]
>> Cc: [email protected]
>> Cc: Mathieu Poirier <[email protected]>
>> Signed-off-by: Suzuki K Poulose <[email protected]>
>> ---
>> arch/arm64/boot/dts/sprd/sc9836.dtsi | 82 +++++-----
>> arch/arm64/boot/dts/sprd/sc9860.dtsi | 215 ++++++++++++++-------------
>> 2 files changed, 153 insertions(+), 144 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi
>> b/arch/arm64/boot/dts/sprd/sc9836.dtsi
>> index 63894c456969..4bcdbb709c01 100644
>> --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
>> +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
>> @@ -50,10 +50,11 @@
>> reg = <0 0x10003000 0 0x1000>;
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - port {
>> - etf_in: endpoint {
>> - slave-mode;
>> - remote-endpoint = <&funnel_out_port0>;
>> + in-ports {
>> + port {
>> + etf_in: endpoint {
>> + remote-endpoint =
>> <&funnel_out_port0>;
>> + };
>> };
>> };
>> };
>> @@ -63,55 +64,50 @@
>> reg = <0 0x10001000 0 0x1000>;
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - ports {
>> +
>> + out-ports {
>> + port {
>> + funnel_out_port0: endpoint {
>> + remote-endpoint = <&etf_in>;
>> + };
>> + };
>> + };
>> +
>> + in-ports {
>> #address-cells = <1>;
>> #size-cells = <0>;
>> - /* funnel output port */
>> port@0 {
>> - reg = <0>;
>> - funnel_out_port0: endpoint {
>> - remote-endpoint = <&etf_in>;
>> - };
>> - };
>> -
>> - /* funnel input port 0-4 */
>> - port@1 {
>> reg = <0>;
>> funnel_in_port0: endpoint {
>> - slave-mode;
>> remote-endpoint = <&etm0_out>;
>> };
>> };
>> - port@2 {
>> + port@1 {
>> reg = <1>;
>> funnel_in_port1: endpoint {
>> - slave-mode;
>> remote-endpoint = <&etm1_out>;
>> };
>> };
>> - port@3 {
>> + port@2 {
>> reg = <2>;
>> funnel_in_port2: endpoint {
>> - slave-mode;
>> remote-endpoint = <&etm2_out>;
>> };
>> };
>> - port@4 {
>> + port@3 {
>> reg = <3>;
>> funnel_in_port3: endpoint {
>> - slave-mode;
>> remote-endpoint = <&etm3_out>;
>> };
>> };
>> - port@5 {
>> + port@4 {
>> reg = <4>;
>> funnel_in_port4: endpoint {
>> - slave-mode;
>> remote-endpoint = <&stm_out>;
>> };
>> };
>> @@ -126,9 +122,11 @@
>> cpu = <&cpu0>;
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm0_out: endpoint {
>> - remote-endpoint = <&funnel_in_port0>;
>> + out-ports {
>> + port {
>> + etm0_out: endpoint {
>> + remote-endpoint =
>> <&funnel_in_port0>;
>> + };
>> };
>> };
>> };
>> @@ -140,9 +138,11 @@
>> cpu = <&cpu1>;
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm1_out: endpoint {
>> - remote-endpoint = <&funnel_in_port1>;
>> + out-ports {
>> + port {
>> + etm1_out: endpoint {
>> + remote-endpoint =
>> <&funnel_in_port1>;
>> + };
>> };
>> };
>> };
>> @@ -154,9 +154,11 @@
>> cpu = <&cpu2>;
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm2_out: endpoint {
>> - remote-endpoint = <&funnel_in_port2>;
>> + out-ports {
>> + port {
>> + etm2_out: endpoint {
>> + remote-endpoint =
>> <&funnel_in_port2>;
>> + };
>> };
>> };
>> };
>> @@ -168,9 +170,11 @@
>> cpu = <&cpu3>;
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm3_out: endpoint {
>> - remote-endpoint = <&funnel_in_port3>;
>> + out-ports {
>> + port {
>> + etm3_out: endpoint {
>> + remote-endpoint =
>> <&funnel_in_port3>;
>> + };
>> };
>> };
>> };
>> @@ -182,9 +186,11 @@
>> reg-names = "stm-base", "stm-stimulus-base";
>> clocks = <&clk26mhz>;
>> clock-names = "apb_pclk";
>> - port {
>> - stm_out: endpoint {
>> - remote-endpoint = <&funnel_in_port4>;
>> + out-ports {
>> + port {
>> + stm_out: endpoint {
>> + remote-endpoint =
>> <&funnel_in_port4>;
>> + };
>> };
>> };
>> };
>> diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi
>> b/arch/arm64/boot/dts/sprd/sc9860.dtsi
>> index 48f5928ed45c..5f57bf055cde 100644
>> --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
>> +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
>> @@ -304,30 +304,29 @@
>> reg = <0 0x10001000 0 0x1000>;
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - ports {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - port@0 {
>> - reg = <0>;
>> + out-ports {
>> + port {
>> soc_funnel_out_port: endpoint {
>> remote-endpoint =
>> <&etb_in>;
>> };
>> };
>> + };
>> - port@1 {
>> + in-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> reg = <0>;
>> soc_funnel_in_port0: endpoint {
>> - slave-mode;
>> remote-endpoint =
>> <&main_funnel_out_port>;
>> };
>> };
>> - port@2 {
>> + port@4 {
>> reg = <4>;
>> soc_funnel_in_port1: endpoint {
>> - slave-mode;
>> remote-endpoint =
>> <&stm_out_port>;
>> };
>> @@ -340,11 +339,12 @@
>> reg = <0 0x10003000 0 0x1000>;
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etb_in: endpoint {
>> - slave-mode;
>> - remote-endpoint =
>> - <&soc_funnel_out_port>;
>> + out-ports {
>> + port {
>> + etb_in: endpoint {
>> + remote-endpoint =
>> +
>> <&soc_funnel_out_port>;
>> + };
>> };
>> };
>> };
>> @@ -356,10 +356,12 @@
>> reg-names = "stm-base", "stm-stimulus-base";
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - stm_out_port: endpoint {
>> - remote-endpoint =
>> - <&soc_funnel_in_port1>;
>> + out-ports {
>> + port {
>> + stm_out_port: endpoint {
>> + remote-endpoint =
>> +
>> <&soc_funnel_in_port1>;
>> + };
>> };
>> };
>> };
>> @@ -369,38 +371,36 @@
>> reg = <0 0x11001000 0 0x1000>;
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - ports {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - port@0 {
>> - reg = <0>;
>> + out-ports {
>> + port {
>> cluster0_funnel_out_port: endpoint
>> {
>> remote-endpoint =
>>
>> <&cluster0_etf_in>;
>> };
>> };
>> + };
>> - port@1 {
>> + in-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> reg = <0>;
>> cluster0_funnel_in_port0: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm0_out>;
>> };
>> };
>> - port@2 {
>> + port@1 {
>> reg = <1>;
>> cluster0_funnel_in_port1: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm1_out>;
>> };
>> };
>> - port@3 {
>> + port@2 {
>> reg = <2>;
>> cluster0_funnel_in_port2: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm2_out>;
>> };
>> };
>> @@ -408,7 +408,6 @@
>> port@4 {
>> reg = <4>;
>> cluster0_funnel_in_port3: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm3_out>;
>> };
>> };
>> @@ -420,46 +419,43 @@
>> reg = <0 0x11002000 0 0x1000>;
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - ports {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - port@0 {
>> - reg = <0>;
>> + out-ports {
>> + port {
>> cluster1_funnel_out_port: endpoint
>> {
>> remote-endpoint =
>>
>> <&cluster1_etf_in>;
>> };
>> };
>> + };
>> - port@1 {
>> + in-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> reg = <0>;
>> cluster1_funnel_in_port0: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm4_out>;
>> };
>> };
>> - port@2 {
>> + port@1 {
>> reg = <1>;
>> cluster1_funnel_in_port1: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm5_out>;
>> };
>> };
>> - port@3 {
>> + port@2 {
>> reg = <2>;
>> cluster1_funnel_in_port2: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm6_out>;
>> };
>> };
>> - port@4 {
>> + port@3 {
>> reg = <3>;
>> cluster1_funnel_in_port3: endpoint
>> {
>> - slave-mode;
>> remote-endpoint =
>> <&etm7_out>;
>> };
>> };
>> @@ -472,22 +468,18 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - ports {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - port@0 {
>> - reg = <0>;
>> + out-ports {
>> + port {
>> cluster0_etf_out: endpoint {
>> remote-endpoint =
>> <&main_funnel_in_port0>;
>> };
>> };
>> + };
>> - port@1 {
>> - reg = <0>;
>> + in-ports {
>> + port {
>> cluster0_etf_in: endpoint {
>> - slave-mode;
>> remote-endpoint =
>>
>> <&cluster0_funnel_out_port>;
>> };
>> @@ -501,22 +493,18 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - ports {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - port@0 {
>> - reg = <0>;
>> + out-ports {
>> + port {
>> cluster1_etf_out: endpoint {
>> remote-endpoint =
>> <&main_funnel_in_port1>;
>> };
>> };
>> + };
>> - port@1 {
>> - reg = <0>;
>> + in-ports {
>> + port {
>> cluster1_etf_in: endpoint {
>> - slave-mode;
>> remote-endpoint =
>>
>> <&cluster1_funnel_out_port>;
>> };
>> @@ -530,31 +518,30 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - ports {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - port@0 {
>> - reg = <0>;
>> + out-ports {
>> + port {
>> main_funnel_out_port: endpoint {
>> remote-endpoint =
>>
>> <&soc_funnel_in_port0>;
>> };
>> };
>> + };
>> - port@1 {
>> + in-ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> reg = <0>;
>> main_funnel_in_port0: endpoint {
>> - slave-mode;
>> remote-endpoint =
>>
>> <&cluster0_etf_out>;
>> };
>> };
>> - port@2 {
>> + port@1 {
>> reg = <1>;
>> main_funnel_in_port1: endpoint {
>> - slave-mode;
>> remote-endpoint =
>>
>> <&cluster1_etf_out>;
>> };
>> @@ -569,10 +556,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm0_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster0_funnel_in_port0>;
>> + out-ports {
>> + port {
>> + etm0_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster0_funnel_in_port0>;
>> + };
>> };
>> };
>> };
>> @@ -584,10 +573,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm1_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster0_funnel_in_port1>;
>> + out-ports {
>> + port {
>> + etm1_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster0_funnel_in_port1>;
>> + };
>> };
>> };
>> };
>> @@ -599,10 +590,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm2_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster0_funnel_in_port2>;
>> + out-ports {
>> + port {
>> + etm2_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster0_funnel_in_port2>;
>> + };
>> };
>> };
>> };
>> @@ -614,10 +607,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm3_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster0_funnel_in_port3>;
>> + out-ports {
>> + port {
>> + etm3_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster0_funnel_in_port3>;
>> + };
>> };
>> };
>> };
>> @@ -629,10 +624,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm4_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster1_funnel_in_port0>;
>> + out-ports {
>> + port {
>> + etm4_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster1_funnel_in_port0>;
>> + };
>> };
>> };
>> };
>> @@ -644,10 +641,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm5_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster1_funnel_in_port1>;
>> + out-ports {
>> + port {
>> + etm5_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster1_funnel_in_port1>;
>> + };
>> };
>> };
>> };
>> @@ -659,10 +658,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm6_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster1_funnel_in_port2>;
>> + out-ports {
>> + port {
>> + etm6_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster1_funnel_in_port2>;
>> + };
>> };
>> };
>> };
>> @@ -674,10 +675,12 @@
>> clocks = <&ext_26m>;
>> clock-names = "apb_pclk";
>> - port {
>> - etm7_out: endpoint {
>> - remote-endpoint =
>> -
>> <&cluster1_funnel_in_port3>;
>> + out-ports {
>> + port {
>> + etm7_out: endpoint {
>> + remote-endpoint =
>> +
>> <&cluster1_funnel_in_port3>;
>> + };
>> };
>> };
>> };
>>
>
On Thu, Sep 27, 2018 at 11:19 AM Chunyan Zhang <[email protected]> wrote:
>
> Hi Suzuki,
>
> On 27 September 2018 at 16:51, Suzuki K Poulose <[email protected]> wrote:
> > +To: Chunyan Zhang
> >
> > Chunyan Zhang,
> >
> > On 09/12/2018 02:53 PM, Suzuki K Poulose wrote:
> >>
> >> Switch to the new coresight bindings for hw ports
> >>
> >
> > How can we push this patch ? Do you generally send the spreadtrum
> > specific changes to ARM soc folks ? Or would you like me to post
> > this directly to ARM soc folks ?
>
> Yeah, at present sprd dts files generally got merged through arm-soc
> (I've added [email protected]).
Yes, that's fine. Generally, we prefer if you collect patches for your
platform first, and then send them as a pull request or short set
of patches. for inclusion, rather than picking them up from the list.
If this is the only DT patch for spreadtrum in 4.20, I can also just
pick it up with your Ack.
Arnd
On 28 September 2018 at 18:45, Arnd Bergmann <[email protected]> wrote:
> On Thu, Sep 27, 2018 at 11:19 AM Chunyan Zhang <[email protected]> wrote:
>>
>> Hi Suzuki,
>>
>> On 27 September 2018 at 16:51, Suzuki K Poulose <[email protected]> wrote:
>> > +To: Chunyan Zhang
>> >
>> > Chunyan Zhang,
>> >
>> > On 09/12/2018 02:53 PM, Suzuki K Poulose wrote:
>> >>
>> >> Switch to the new coresight bindings for hw ports
>> >>
>> >
>> > How can we push this patch ? Do you generally send the spreadtrum
>> > specific changes to ARM soc folks ? Or would you like me to post
>> > this directly to ARM soc folks ?
>>
>> Yeah, at present sprd dts files generally got merged through arm-soc
>> (I've added [email protected]).
>
> Yes, that's fine. Generally, we prefer if you collect patches for your
> platform first, and then send them as a pull request or short set
> of patches. for inclusion, rather than picking them up from the list.
>
Ok, I will send you a patchset once merge window open.
Thanks,
Chunyan
> If this is the only DT patch for spreadtrum in 4.20, I can also just
> pick it up with your Ack.
>
> Arnd
On Thu, Sep 27, 2018 at 09:18:06AM +0100, Suzuki K Poulose wrote:
> Hi Andy
>
> On 09/12/2018 02:53 PM, Suzuki K Poulose wrote:
> >Switch to updated coresight bindings for hw ports
> >
> >Cc: Andy Gross <[email protected]>
> >Cc: David Brown <[email protected]>
> >Cc: Ivan T. Ivanov <[email protected]>
> >Cc: Mathieu Poirier <[email protected]>
> >Signed-off-by: Suzuki K Poulose <[email protected]>
> >---
> >Changes since v1:
> > - Fixed TPIU port direction
> > - Use better subject tag for the patch
> >---
>
>
> Please could you pull this and the patch for ARM (Patch 9/11) ?
>
> Suzuki
Done. Thanks