2018-10-03 17:54:27

by Srinivas Kandagatla

[permalink] [raw]
Subject: [PATCH] slimbus: ngd: QCOM_QMI_HELPERS has to be selected

From: Niklas Cassel <[email protected]>

QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is
to select it, not depend upon it.

Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
---
drivers/slimbus/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
index 9d73ad806698..9cca2c3559f2 100644
--- a/drivers/slimbus/Kconfig
+++ b/drivers/slimbus/Kconfig
@@ -22,8 +22,8 @@ config SLIM_QCOM_CTRL

config SLIM_QCOM_NGD_CTRL
tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
- depends on QCOM_QMI_HELPERS
depends on HAS_IOMEM && DMA_ENGINE
+ select QCOM_QMI_HELPERS
help
Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device
Component is programmed using Linux kernel.
--
2.19.0



2018-10-15 18:33:11

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH] slimbus: ngd: QCOM_QMI_HELPERS has to be selected

On Wed, Oct 03, 2018 at 06:52:36PM +0100, Srinivas Kandagatla wrote:
> From: Niklas Cassel <[email protected]>
>
> QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is
> to select it, not depend upon it.
>
> Signed-off-by: Niklas Cassel <[email protected]>
> Reviewed-by: Alex Elder <[email protected]>
> Reviewed-by: Bjorn Andersson <[email protected]>
> Signed-off-by: Srinivas Kandagatla <[email protected]>
> ---
> drivers/slimbus/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
> index 9d73ad806698..9cca2c3559f2 100644
> --- a/drivers/slimbus/Kconfig
> +++ b/drivers/slimbus/Kconfig
> @@ -22,8 +22,8 @@ config SLIM_QCOM_CTRL
>
> config SLIM_QCOM_NGD_CTRL
> tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
> - depends on QCOM_QMI_HELPERS
> depends on HAS_IOMEM && DMA_ENGINE
> + select QCOM_QMI_HELPERS
> help
> Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device
> Component is programmed using Linux kernel.
> --
> 2.19.0
>

This adds the following build warning when applied:

WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
Depends on [n]: ARCH_QCOM && NET [=y]
Selected by [m]:
- SLIM_QCOM_NGD_CTRL [=m] && SLIMBUS [=m] && HAS_IOMEM [=y] && DMA_ENGINE [=y]



2018-10-15 19:45:38

by Niklas Cassel

[permalink] [raw]
Subject: [PATCH v2] slimbus: ngd: QCOM_QMI_HELPERS has to be selected

QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is
to select it, not depend upon it.

Because of this change, we now also need to depend on the same
Kconfigs as QCOM_QMI_HELPERS depends on.

Signed-off-by: Niklas Cassel <[email protected]>
---
Hello Greg, Srini,

I'm sorry for this.
(Although I'm a bit curious why 0-day test bot didn't catch this.)

Considering that I've just changed QCOM_QMI_HELPERS in:
ccfb464cd106 ("soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs")
which is currently in linux-next, and that this Kconfig should
depend on the same Kconfigs as QCOM_QMI_HELPERS depends on,
I chose to have this Kconfig match the QCOM_QMI_HELPERS that is
currently in linux-next.

drivers/slimbus/Kconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
index 9d73ad806698..8cd595148d17 100644
--- a/drivers/slimbus/Kconfig
+++ b/drivers/slimbus/Kconfig
@@ -22,8 +22,9 @@ config SLIM_QCOM_CTRL

config SLIM_QCOM_NGD_CTRL
tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
- depends on QCOM_QMI_HELPERS
- depends on HAS_IOMEM && DMA_ENGINE
+ depends on HAS_IOMEM && DMA_ENGINE && NET
+ depends on ARCH_QCOM || COMPILE_TEST
+ select QCOM_QMI_HELPERS
help
Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device
Component is programmed using Linux kernel.
--
2.17.2


2018-10-16 09:38:15

by Srinivas Kandagatla

[permalink] [raw]
Subject: Re: [PATCH v2] slimbus: ngd: QCOM_QMI_HELPERS has to be selected


Thanks Niklas for quick v2 patch!

On 15/10/18 20:44, Niklas Cassel wrote:
> QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is
> to select it, not depend upon it.
>
> Because of this change, we now also need to depend on the same
> Kconfigs as QCOM_QMI_HELPERS depends on.
>
> Signed-off-by: Niklas Cassel <[email protected]>

LGTM

Acked-by: Srinivas Kandagatla <[email protected]>

> ---
> Hello Greg, Srini,
>
> I'm sorry for this.
> (Although I'm a bit curious why 0-day test bot didn't catch this.)
>
> Considering that I've just changed QCOM_QMI_HELPERS in:
> ccfb464cd106 ("soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs")
> which is currently in linux-next, and that this Kconfig should
> depend on the same Kconfigs as QCOM_QMI_HELPERS depends on,
> I chose to have this Kconfig match the QCOM_QMI_HELPERS that is
> currently in linux-next.
>
> drivers/slimbus/Kconfig | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
> index 9d73ad806698..8cd595148d17 100644
> --- a/drivers/slimbus/Kconfig
> +++ b/drivers/slimbus/Kconfig
> @@ -22,8 +22,9 @@ config SLIM_QCOM_CTRL
>
> config SLIM_QCOM_NGD_CTRL
> tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
> - depends on QCOM_QMI_HELPERS
> - depends on HAS_IOMEM && DMA_ENGINE
> + depends on HAS_IOMEM && DMA_ENGINE && NET
> + depends on ARCH_QCOM || COMPILE_TEST
> + select QCOM_QMI_HELPERS
> help
> Select driver if Qualcomm's SLIMbus Satellite Non-Generic Device
> Component is programmed using Linux kernel.
>

2018-11-07 14:00:35

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH v2] slimbus: ngd: QCOM_QMI_HELPERS has to be selected

On Mon, Oct 15, 2018 at 09:44:41PM +0200, Niklas Cassel wrote:
> QCOM_QMI_HELPERS is a hidden kconfig, so the proper usage is
> to select it, not depend upon it.
>
> Because of this change, we now also need to depend on the same
> Kconfigs as QCOM_QMI_HELPERS depends on.
>
> Signed-off-by: Niklas Cassel <[email protected]>
> Acked-by: Srinivas Kandagatla <[email protected]>
> ---
> Hello Greg, Srini,
>
> I'm sorry for this.
> (Although I'm a bit curious why 0-day test bot didn't catch this.)
>
> Considering that I've just changed QCOM_QMI_HELPERS in:
> ccfb464cd106 ("soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs")
> which is currently in linux-next, and that this Kconfig should
> depend on the same Kconfigs as QCOM_QMI_HELPERS depends on,
> I chose to have this Kconfig match the QCOM_QMI_HELPERS that is
> currently in linux-next.

Really? I do this and then I get this build error on x86:

drivers/slimbus/qcom-ngd-ctrl.c: In function ‘of_qcom_slim_ngd_register’:
drivers/slimbus/qcom-ngd-ctrl.c:1333:63: warning: dereferencing ‘void *’ pointer
data = of_match_node(qcom_slim_ngd_dt_match, parent->of_node)->data;
^~
drivers/slimbus/qcom-ngd-ctrl.c:1333:63: error: request for member ‘data’ in something not a structure or union


So I can't take this, something else must be wrong here...

thanks,

greg k-h

2018-11-07 14:17:04

by Srinivas Kandagatla

[permalink] [raw]
Subject: Re: [PATCH v2] slimbus: ngd: QCOM_QMI_HELPERS has to be selected



On 07/11/18 13:59, Greg KH wrote:
> Really? I do this and then I get this build error on x86:
>
> drivers/slimbus/qcom-ngd-ctrl.c: In function ‘of_qcom_slim_ngd_register’:
> drivers/slimbus/qcom-ngd-ctrl.c:1333:63: warning: dereferencing ‘void *’ pointer
> data = of_match_node(qcom_slim_ngd_dt_match, parent->of_node)->data;
> ^~
> drivers/slimbus/qcom-ngd-ctrl.c:1333:63: error: request for member ‘data’ in something not a structure or union
>
>
> So I can't take this, something else must be wrong here...
That is fine!
Yes, there seems to be one more issue here, on non DT platforms
of_match_node is set to be NULL, which is why we are seeing this error I
guess!

I will fix this up, do some test and send both the fixes together.

thanks,
srini