This is the start of the stable review cycle for the 4.4.167 release.
There are 91 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.167-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.167-rc1
Emmanuel Grumbach <[email protected]>
mac80211: ignore NullFunc frames in the duplicate detection
Felix Fietkau <[email protected]>
mac80211: fix reordering of buffered broadcast packets
Felix Fietkau <[email protected]>
mac80211: ignore tx status for PS stations in ieee80211_tx_status_ext
Ben Greear <[email protected]>
mac80211: Clear beacon_int in ieee80211_do_stop
Vasyl Vavrychuk <[email protected]>
mac80211_hwsim: Timer should be initialized before device registered
Macpaul Lin <[email protected]>
kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()
Peter Shih <[email protected]>
tty: serial: 8250_mtk: always resume the device in probe.
Paulo Alcantara <[email protected]>
cifs: Fix separator when building path from dentry
Greg Kroah-Hartman <[email protected]>
Staging: lustre: remove two build warnings
Mathias Nyman <[email protected]>
xhci: Prevent U1/U2 link pm states if exit latency is too long
Bin Liu <[email protected]>
dmaengine: cppi41: delete channel from pending list when stop channel
Chuck Lever <[email protected]>
SUNRPC: Fix leak of krb5p encode pages
Halil Pasic <[email protected]>
virtio/s390: fix race in ccw_io_helper()
Halil Pasic <[email protected]>
virtio/s390: avoid race on vcdev->config
Takashi Iwai <[email protected]>
ALSA: pcm: Fix interval evaluation with openmin/max
Takashi Iwai <[email protected]>
ALSA: pcm: Call snd_pcm_unlink() conditionally at closing
Chanho Min <[email protected]>
ALSA: pcm: Fix starvation on down_write_nonblock()
Kai-Heng Feng <[email protected]>
ALSA: hda: Add support for AMD Stoney Ridge
Hui Peng <[email protected]>
ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.c
Mathias Payer <[email protected]>
USB: check usb_get_extra_descriptor for proper size
Alexander Theissen <[email protected]>
usb: appledisplay: Add 27" Apple Cinema Display
Harry Pan <[email protected]>
usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device
Yangtao Li <[email protected]>
net: amd: add missing of_node_put()
Pan Bian <[email protected]>
iommu/vt-d: Use memunmap to free memremap
Vincent Chen <[email protected]>
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
Aya Levin <[email protected]>
net/mlx4: Fix UBSAN warning of signed integer overflow
Tariq Toukan <[email protected]>
net/mlx4_core: Fix uninitialized variable compilation warning
Jack Morgenstein <[email protected]>
net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command
Denis Bolotin <[email protected]>
qed: Fix reading wrong value in loop condition
Denis Bolotin <[email protected]>
qed: Fix PTT leak in qed_drain()
Sudarsana Reddy Kalluru <[email protected]>
bnx2x: Assign unique DMAE channel number for FW DMAE transactions.
Sven Eckelmann <[email protected]>
batman-adv: Expand merged fragment buffer for full packet
Fabrizio Castro <[email protected]>
can: rcar_can: Fix erroneous registration
Geert Uytterhoeven <[email protected]>
iommu/ipmmu-vmsa: Fix crash on early domain free
Lu Baolu <[email protected]>
iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
Arnd Bergmann <[email protected]>
usb: gadget: dummy: fix nonsensical comparisons
Simon Guo <[email protected]>
mm: mlock: avoid increase mm->locked_vm on mlock() when already mlock2(,MLOCK_ONFAULT)
Pavel Tikhomirov <[email protected]>
mm: cleancache: fix corruption on missed inode invalidation
Alexey Brodkin <[email protected]>
arc: [devboards] Add support of NFSv3 ACL
Kevin Hilman <[email protected]>
ARC: change defconfig defaults to ARCv2
Filipe Manana <[email protected]>
Btrfs: fix use-after-free when dumping free space
Nikolay Borisov <[email protected]>
btrfs: Always try all copies when reading extent buffers
Adam Wong <[email protected]>
Input: elan_i2c - add support for ELAN0621 touchpad
Noah Westervelt <[email protected]>
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
Patrick Gaskin <[email protected]>
Input: elan_i2c - add ELAN0620 to the ACPI table
Christian Hoff <[email protected]>
Input: matrix_keypad - check for errors from of_get_named_gpio()
Cameron Gutman <[email protected]>
Input: xpad - quirk all PDP Xbox One gamepads
Wei Yongjun <[email protected]>
leds: leds-gpio: Fix return value check in create_gpio_led()
Milo Kim <[email protected]>
leds: turn off the LED and wait for completion on unregistering LED class device
Markus Hofstaetter <[email protected]>
leds: call led_pwm_set() in leds-pwm to enforce default LED_OFF
Laura Abbott <[email protected]>
kgdboc: Fix warning with module build
Laura Abbott <[email protected]>
kgdboc: Fix restrict error
Kees Cook <[email protected]>
scsi: csiostor: Avoid content leaks and casts
Takashi Iwai <[email protected]>
ALSA: trident: Suppress gcc string warning
Martin Wilck <[email protected]>
scsi: scsi_devinfo: cleanly zero-pad devinfo strings
Sam Bobroff <[email protected]>
drm/ast: Fix incorrect free on ioregs
Dmitry V. Levin <[email protected]>
mips: fix mips_get_syscall_arg o32 check
Mathias Kresin <[email protected]>
MIPS: ralink: Fix mt7620 nd_sd pinmux
Andrea Parri <[email protected]>
uprobes: Fix handle_swbp() vs. unregister() + register() race once more
Sagi Grimberg <[email protected]>
iser: set sector for ambiguous mr status errors
Arnd Bergmann <[email protected]>
kdb: use memmove instead of overlapping memcpy
Arnd Bergmann <[email protected]>
staging: rts5208: fix gcc-8 logic error warning
Arnd Bergmann <[email protected]>
scsi: bfa: convert to strlcpy/strlcat
Arnd Bergmann <[email protected]>
drm: gma500: fix logic error
Sultan Alsawaf <[email protected]>
ip_tunnel: Fix name string concatenate in __ip_tunnel_create()
Guenter Roeck <[email protected]>
kernfs: Replace strncpy with memcpy
Linus Torvalds <[email protected]>
unifdef: use memcpy instead of strncpy
Guenter Roeck <[email protected]>
kobject: Replace strncpy with memcpy
Stephen Rothwell <[email protected]>
disable stringop truncation warnings for now
Arnd Bergmann <[email protected]>
exec: avoid gcc-8 warning for get_task_comm
Xiongfeng Wang <[email protected]>
Kbuild: suppress packed-not-aligned warning for default setting only
YueHaibing <[email protected]>
misc: mic/scif: fix copy-paste error in scif_create_remote_lookup
Michael Niewöhner <[email protected]>
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
Kai-Heng Feng <[email protected]>
USB: usb-storage: Add new IDs to ums-realtek
Josef Bacik <[email protected]>
btrfs: release metadata before running delayed refs
Richard Genoud <[email protected]>
dmaengine: at_hdmac: fix module unloading
Richard Genoud <[email protected]>
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
Pan Bian <[email protected]>
ext2: fix potential use after free
Takashi Iwai <[email protected]>
ALSA: sparc: Fix invalid snd_free_pages() at error path
Takashi Iwai <[email protected]>
ALSA: control: Fix race between adding and removing a user element
Takashi Iwai <[email protected]>
ALSA: ac97: Fix incorrect bit shift at AC97-SPSA control write
Takashi Iwai <[email protected]>
ALSA: wss: Fix invalid snd_free_pages() at error path
Filipe Manana <[email protected]>
Btrfs: ensure path name is null terminated at btrfs_control_ioctl
Max Filippov <[email protected]>
xtensa: fix coprocessor context offset definitions
Max Filippov <[email protected]>
xtensa: enable coprocessors that are being flushed
Junaid Shahid <[email protected]>
kvm: mmu: Fix race in emulated page table writes
Bernd Eckstein <[email protected]>
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
Julian Wiedmann <[email protected]>
s390/qeth: fix length check in SNMP processing
Pan Bian <[email protected]>
rapidio/rionet: do not free skb before reading its length
Sasha Levin <[email protected]>
Revert "wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()"
Matthias Schwarzott <[email protected]>
media: em28xx: Fix use-after-free when disconnecting
-------------
Diffstat:
Makefile | 7 ++-
arch/arc/Kconfig | 2 +-
arch/arc/Makefile | 2 +-
arch/arc/configs/axs101_defconfig | 2 +
arch/arc/configs/axs103_defconfig | 1 +
arch/arc/configs/axs103_smp_defconfig | 1 +
arch/arc/configs/nsim_700_defconfig | 1 +
arch/arc/configs/nsimosci_defconfig | 2 +
arch/arc/configs/nsimosci_hs_defconfig | 1 +
arch/arc/configs/nsimosci_hs_smp_defconfig | 1 +
arch/arc/configs/tb10x_defconfig | 1 +
arch/arc/configs/vdk_hs38_defconfig | 1 +
arch/arc/configs/vdk_hs38_smp_defconfig | 1 +
arch/mips/include/asm/syscall.h | 2 +-
arch/mips/ralink/mt7620.c | 2 +-
arch/x86/kvm/mmu.c | 27 +++------
arch/xtensa/kernel/asm-offsets.c | 16 +++---
arch/xtensa/kernel/process.c | 5 +-
drivers/dma/at_hdmac.c | 10 +++-
drivers/dma/cppi41.c | 16 +++++-
drivers/gpu/drm/ast/ast_main.c | 3 +-
drivers/gpu/drm/gma500/mdfld_intel_display.c | 2 +-
drivers/infiniband/ulp/iser/iser_verbs.c | 7 +--
drivers/input/joystick/xpad.c | 16 ++----
drivers/input/keyboard/matrix_keypad.c | 23 +++++---
drivers/input/mouse/elan_i2c_core.c | 3 +
drivers/iommu/intel-iommu.c | 2 +-
drivers/iommu/intel-svm.c | 2 +-
drivers/iommu/ipmmu-vmsa.c | 3 +
drivers/leds/led-class.c | 5 +-
drivers/leds/leds-gpio.c | 4 +-
drivers/leds/leds-pwm.c | 1 +
drivers/media/usb/em28xx/em28xx-dvb.c | 3 +-
drivers/misc/mic/scif/scif_rma.c | 2 +-
drivers/net/can/rcar_can.c | 5 +-
drivers/net/ethernet/amd/sunlance.c | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 7 +++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 +
drivers/net/ethernet/faraday/ftmac100.c | 7 +--
drivers/net/ethernet/mellanox/mlx4/alloc.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 +-
drivers/net/ethernet/mellanox/mlx4/mr.c | 1 +
drivers/net/ethernet/qlogic/qed/qed_int.c | 2 +
drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +-
drivers/net/rionet.c | 2 +-
drivers/net/usb/ipheth.c | 10 ++--
drivers/net/wireless/mac80211_hwsim.c | 8 +--
drivers/net/wireless/ti/wlcore/cmd.c | 6 --
drivers/s390/net/qeth_core_main.c | 27 ++++-----
drivers/s390/virtio/virtio_ccw.c | 17 +++++-
drivers/scsi/bfa/bfa_fcbuild.c | 8 +--
drivers/scsi/bfa/bfa_fcs.c | 78 ++++++++++++-------------
drivers/scsi/bfa/bfa_fcs_lport.c | 62 ++++++++------------
drivers/scsi/bfa/bfa_ioc.c | 2 +-
drivers/scsi/bfa/bfa_svc.c | 4 +-
drivers/scsi/bfa/bfad.c | 20 +++----
drivers/scsi/bfa/bfad_attr.c | 2 +-
drivers/scsi/bfa/bfad_bsg.c | 6 +-
drivers/scsi/csiostor/csio_lnode.c | 43 ++++++++------
drivers/scsi/scsi_devinfo.c | 22 +++----
drivers/staging/lustre/lustre/lmv/lmv_obd.c | 2 +-
drivers/staging/rts5208/sd.c | 6 --
drivers/tty/serial/8250/8250_mtk.c | 16 +++---
drivers/tty/serial/kgdboc.c | 47 ++++++++-------
drivers/usb/core/hub.c | 2 +-
drivers/usb/core/quirks.c | 7 +++
drivers/usb/core/usb.c | 6 +-
drivers/usb/gadget/udc/dummy_hcd.c | 9 ++-
drivers/usb/host/hwa-hc.c | 2 +-
drivers/usb/host/xhci.c | 16 ++++++
drivers/usb/misc/appledisplay.c | 1 +
drivers/usb/storage/unusual_realtek.h | 10 ++++
fs/btrfs/disk-io.c | 10 +---
fs/btrfs/free-space-cache.c | 2 +
fs/btrfs/super.c | 1 +
fs/btrfs/transaction.c | 6 +-
fs/cifs/dir.c | 2 +-
fs/exec.c | 7 +--
fs/ext2/xattr.c | 2 +-
fs/kernfs/symlink.c | 2 +-
include/linux/sched.h | 7 ++-
include/linux/usb.h | 4 +-
include/sound/pcm_params.h | 4 +-
kernel/debug/kdb/kdb_support.c | 4 +-
kernel/events/uprobes.c | 12 +++-
lib/kobject.c | 2 +-
mm/mlock.c | 3 +
mm/truncate.c | 8 ++-
net/batman-adv/fragmentation.c | 2 +-
net/ipv4/ip_tunnel.c | 4 +-
net/mac80211/iface.c | 2 +
net/mac80211/rx.c | 1 +
net/mac80211/status.c | 2 +
net/mac80211/tx.c | 4 +-
net/sunrpc/auth_gss/auth_gss.c | 4 ++
scripts/Makefile.extrawarn | 3 +
scripts/unifdef.c | 4 +-
sound/core/control.c | 80 +++++++++++++++-----------
sound/core/pcm_native.c | 14 +++--
sound/isa/wss/wss_lib.c | 2 -
sound/pci/ac97/ac97_codec.c | 2 +-
sound/pci/hda/hda_intel.c | 4 ++
sound/pci/trident/trident.c | 2 +-
sound/sparc/cs4231.c | 8 +--
sound/usb/card.c | 5 +-
105 files changed, 490 insertions(+), 382 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 7b69154171b407844c273ab4c10b5f0ddcd6aa29 upstream.
Some spurious calls of snd_free_pages() have been overlooked and
remain in the error paths of wss driver code. Since runtime->dma_area
is managed by the PCM core helper, we shouldn't release manually.
Drop the superfluous calls.
Reviewed-by: Takashi Sakamoto <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/wss/wss_lib.c | 2 --
1 file changed, 2 deletions(-)
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -1531,7 +1531,6 @@ static int snd_wss_playback_open(struct
if (err < 0) {
if (chip->release_dma)
chip->release_dma(chip, chip->dma_private_data, chip->dma1);
- snd_free_pages(runtime->dma_area, runtime->dma_bytes);
return err;
}
chip->playback_substream = substream;
@@ -1572,7 +1571,6 @@ static int snd_wss_capture_open(struct s
if (err < 0) {
if (chip->release_dma)
chip->release_dma(chip, chip->dma_private_data, chip->dma2);
- snd_free_pages(runtime->dma_area, runtime->dma_bytes);
return err;
}
chip->capture_substream = substream;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
This reverts commit 3fdd34643ffc378b5924941fad40352c04610294 which was
upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1.
>From Dietmar May's report on the stable mailing list
(https://www.spinics.net/lists/stable/msg272201.html):
> I've run into some problems which appear due to (a) recent patch(es) on
> the wlcore wifi driver.
>
> 4.4.160 - commit 3fdd34643ffc378b5924941fad40352c04610294
> 4.9.131 - commit afeeecc764436f31d4447575bb9007732333818c
>
> Earlier versions (4.9.130 and 4.4.159 - tested back to 4.4.49) do not
> exhibit this problem. It is still present in 4.9.141.
>
> master as of 4.20.0-rc4 does not exhibit this problem.
>
> Basically, during client association when in AP mode (running hostapd),
> handshake may or may not complete following a noticeable delay. If
> successful, then the driver fails consistently in warn_slowpath_null
> during disassociation. If unsuccessful, the wifi client attempts multiple
> times, sometimes failing repeatedly. I've had clients unable to connect
> for 3-5 minutes during testing, with the syslog filled with dozens of
> backtraces. syslog details are below.
>
> I'm working on an embedded device with a TI 3352 ARM processor and a
> murata wl1271 module in sdio mode. We're running a fully patched ubuntu
> 18.04 ARM build, with a kernel built from kernel.org's stable/linux repo <https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.9.y&id=afeeecc764436f31d4447575bb9007732333818c>.
> Relevant parts of the kernel config are included below.
>
> The commit message states:
>
> > /I've only seen this few times with the runtime PM patches enabled so
> > this one is probably not needed before that. This seems to work
> > currently based on the current PM implementation timer. Let's apply
> > this separately though in case others are hitting this issue./
> We're not doing anything explicit with power management. The device is an
> IoT edge gateway with battery backup, normally running on wall power. The
> battery is currently used solely to shut down the system cleanly to avoid
> filesystem corruption.
>
> The device tree is configured to keep power in suspend; but the device
> should never suspend, so in our case, there is no need to call
> wl1271_ps_elp_wakeup() or wl1271_ps_elp_sleep(), as occurs in the patch.
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ti/wlcore/cmd.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -35,7 +35,6 @@
#include "wl12xx_80211.h"
#include "cmd.h"
#include "event.h"
-#include "ps.h"
#include "tx.h"
#include "hw_ops.h"
@@ -192,10 +191,6 @@ int wlcore_cmd_wait_for_event_or_timeout
timeout_time = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
- ret = wl1271_ps_elp_wakeup(wl);
- if (ret < 0)
- return ret;
-
do {
if (time_after(jiffies, timeout_time)) {
wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
@@ -227,7 +222,6 @@ int wlcore_cmd_wait_for_event_or_timeout
} while (!event);
out:
- wl1271_ps_elp_sleep(wl);
kfree(events_vector);
return ret;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pan Bian <[email protected]>
[ Upstream commit cfc435198f53a6fa1f656d98466b24967ff457d0 ]
skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.
Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/rionet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -215,9 +215,9 @@ static int rionet_start_xmit(struct sk_b
* it just report sending a packet to the target
* (without actual packet transfer).
*/
- dev_kfree_skb_any(skb);
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += skb->len;
+ dev_kfree_skb_any(skb);
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bernd Eckstein <[email protected]>
[ Upstream commit 45611c61dd503454b2edae00aabe1e429ec49ebe ]
The bug is not easily reproducable, as it may occur very infrequently
(we had machines with 20minutes heavy downloading before it occurred)
However, on a virual machine (VMWare on Windows 10 host) it occurred
pretty frequently (1-2 seconds after a speedtest was started)
dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback
before it is set.
This causes the following problems:
- double free of the skb or potential memory leak
- in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually
general protection fault
Example dmesg output:
[ 134.841986] ------------[ cut here ]------------
[ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0
[ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0
[ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu
[ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0
[ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286
[ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006
[ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490
[ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4
[ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000
[ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000
[ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 134.842057] Call Trace:
[ 134.842060] ? aa_sk_perm+0x53/0x1a0
[ 134.842064] inet_recvmsg+0x51/0xc0
[ 134.842066] sock_recvmsg+0x43/0x50
[ 134.842070] SYSC_recvfrom+0xe4/0x160
[ 134.842072] ? __schedule+0x3de/0x8b0
[ 134.842075] ? ktime_get_ts64+0x4c/0xf0
[ 134.842079] SyS_recvfrom+0xe/0x10
[ 134.842082] do_syscall_64+0x73/0x130
[ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 134.842086] RIP: 0033:0x7fe331f5a81d
[ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
[ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d
[ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003
[ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000
[ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698
[ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000
[ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00
[ 134.842126] ---[ end trace b7138fc08c83147f ]---
[ 134.842144] general protection fault: 0000 [#1] SMP PTI
[ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu
[ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440
[ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202
[ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034
[ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200
[ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034
[ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c
[ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00
[ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 134.842179] Call Trace:
[ 134.842181] inet_release+0x42/0x70
[ 134.842183] __sock_release+0x42/0xb0
[ 134.842184] sock_close+0x15/0x20
[ 134.842187] __fput+0xea/0x220
[ 134.842189] ____fput+0xe/0x10
[ 134.842191] task_work_run+0x8a/0xb0
[ 134.842193] exit_to_usermode_loop+0xc4/0xd0
[ 134.842195] do_syscall_64+0xf4/0x130
[ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 134.842197] RIP: 0033:0x7fe331f5a560
[ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560
[ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003
[ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0
[ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0
[ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770
[ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80
[ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8
[ 134.842227] ---[ end trace b7138fc08c831480 ]---
The proposed patch eliminates a potential racing condition.
Before, usb_submit_urb was called and _after_ that, the skb was attached
(dev->tx_skb). So, on a callback it was possible, however unlikely that the
skb was freed before it was set. That way (because dev->tx_skb was not set
to NULL after it was freed), it could happen that a skb from a earlier
transmission was freed a second time (and the skb we should have freed did
not get freed at all)
Now we free the skb directly in ipheth_tx(). It is not passed to the
callback anymore, eliminating the posibility of a double free of the same
skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any()
respectively dev_consume_skb_any() to free the skb.
Signed-off-by: Oliver Zweigle <[email protected]>
Signed-off-by: Bernd Eckstein <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/ipheth.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -140,7 +140,6 @@ struct ipheth_device {
struct usb_device *udev;
struct usb_interface *intf;
struct net_device *net;
- struct sk_buff *tx_skb;
struct urb *tx_urb;
struct urb *rx_urb;
unsigned char *tx_buf;
@@ -229,6 +228,7 @@ static void ipheth_rcvbulk_callback(stru
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
+ case -EPROTO:
return;
case 0:
break;
@@ -280,7 +280,6 @@ static void ipheth_sndbulk_callback(stru
dev_err(&dev->intf->dev, "%s: urb status: %d\n",
__func__, status);
- dev_kfree_skb_irq(dev->tx_skb);
netif_wake_queue(dev->net);
}
@@ -410,7 +409,7 @@ static int ipheth_tx(struct sk_buff *skb
if (skb->len > IPHETH_BUF_SIZE) {
WARN(1, "%s: skb too large: %d bytes\n", __func__, skb->len);
dev->net->stats.tx_dropped++;
- dev_kfree_skb_irq(skb);
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -430,12 +429,11 @@ static int ipheth_tx(struct sk_buff *skb
dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
__func__, retval);
dev->net->stats.tx_errors++;
- dev_kfree_skb_irq(skb);
+ dev_kfree_skb_any(skb);
} else {
- dev->tx_skb = skb;
-
dev->net->stats.tx_packets++;
dev->net->stats.tx_bytes += skb->len;
+ dev_consume_skb_any(skb);
netif_stop_queue(net);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Junaid Shahid <[email protected]>
commit 0e0fee5c539b61fdd098332e0e2cc375d9073706 upstream.
When a guest page table is updated via an emulated write,
kvm_mmu_pte_write() is called to update the shadow PTE using the just
written guest PTE value. But if two emulated guest PTE writes happened
concurrently, it is possible that the guest PTE and the shadow PTE end
up being out of sync. Emulated writes do not mark the shadow page as
unsync-ed, so this inconsistency will not be resolved even by a guest TLB
flush (unless the page was marked as unsync-ed at some other point).
This is fixed by re-reading the current value of the guest PTE after the
MMU lock has been acquired instead of just using the value that was
written prior to calling kvm_mmu_pte_write().
Signed-off-by: Junaid Shahid <[email protected]>
Reviewed-by: Wanpeng Li <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu.c | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -4174,9 +4174,9 @@ static void mmu_pte_write_flush_tlb(stru
}
static u64 mmu_pte_write_fetch_gpte(struct kvm_vcpu *vcpu, gpa_t *gpa,
- const u8 *new, int *bytes)
+ int *bytes)
{
- u64 gentry;
+ u64 gentry = 0;
int r;
/*
@@ -4188,22 +4188,12 @@ static u64 mmu_pte_write_fetch_gpte(stru
/* Handle a 32-bit guest writing two halves of a 64-bit gpte */
*gpa &= ~(gpa_t)7;
*bytes = 8;
- r = kvm_vcpu_read_guest(vcpu, *gpa, &gentry, 8);
- if (r)
- gentry = 0;
- new = (const u8 *)&gentry;
}
- switch (*bytes) {
- case 4:
- gentry = *(const u32 *)new;
- break;
- case 8:
- gentry = *(const u64 *)new;
- break;
- default:
- gentry = 0;
- break;
+ if (*bytes == 4 || *bytes == 8) {
+ r = kvm_vcpu_read_guest_atomic(vcpu, *gpa, &gentry, *bytes);
+ if (r)
+ gentry = 0;
}
return gentry;
@@ -4313,8 +4303,6 @@ void kvm_mmu_pte_write(struct kvm_vcpu *
pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
- gentry = mmu_pte_write_fetch_gpte(vcpu, &gpa, new, &bytes);
-
/*
* No need to care whether allocation memory is successful
* or not since pte prefetch is skiped if it does not have
@@ -4323,6 +4311,9 @@ void kvm_mmu_pte_write(struct kvm_vcpu *
mmu_topup_memory_caches(vcpu);
spin_lock(&vcpu->kvm->mmu_lock);
+
+ gentry = mmu_pte_write_fetch_gpte(vcpu, &gpa, &bytes);
+
++vcpu->kvm->stat.mmu_pte_write;
kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 7194eda1ba0872d917faf3b322540b4f57f11ba5 upstream.
The function snd_ac97_put_spsa() gets the bit shift value from the
associated private_value, but it extracts too much; the current code
extracts 8 bit values in bits 8-15, but this is a combination of two
nibbles (bits 8-11 and bits 12-15) for left and right shifts.
Due to the incorrect bits extraction, the actual shift may go beyond
the 32bit value, as spotted recently by UBSAN check:
UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7
shift exponent 68 is too large for 32-bit type 'int'
This patch fixes the shift value extraction by masking the properly
with 0x0f instead of 0xff.
Reported-and-tested-by: Meelis Roos <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/ac97/ac97_codec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -824,7 +824,7 @@ static int snd_ac97_put_spsa(struct snd_
{
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
int reg = kcontrol->private_value & 0xff;
- int shift = (kcontrol->private_value >> 8) & 0xff;
+ int shift = (kcontrol->private_value >> 8) & 0x0f;
int mask = (kcontrol->private_value >> 16) & 0xff;
// int invert = (kcontrol->private_value >> 24) & 0xff;
unsigned short value, old, new;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Kresin <[email protected]>
commit 7d35baa4e9ec4b717bc0e58a39cdb6a1c50f5465 upstream.
In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.
Reported-by: Kristian Evensen <[email protected]>
Signed-off-by: Mathias Kresin <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v3.18+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/ralink/mt7620.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -81,7 +81,7 @@ static struct rt2880_pmx_func pcie_rst_g
};
static struct rt2880_pmx_func nd_sd_grp[] = {
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
- FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+ FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
};
static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Wilck <[email protected]>
commit 81df022b688d43d2a3667518b2f755d384397910 upstream.
Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte. This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).
[mkp: applied by hand and added braces]
Signed-off-by: Martin Wilck <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_devinfo.c | 22 +++++++---------------
1 file changed, 7 insertions(+), 15 deletions(-)
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -33,7 +33,6 @@ struct scsi_dev_info_list_table {
};
-static const char spaces[] = " "; /* 16 of them */
static unsigned scsi_default_dev_flags;
static LIST_HEAD(scsi_dev_info_list);
static char scsi_dev_flags[256];
@@ -291,20 +290,13 @@ static void scsi_strcpy_devinfo(char *na
size_t from_length;
from_length = strlen(from);
- strncpy(to, from, min(to_length, from_length));
- if (from_length < to_length) {
- if (compatible) {
- /*
- * NUL terminate the string if it is short.
- */
- to[from_length] = '\0';
- } else {
- /*
- * space pad the string if it is short.
- */
- strncpy(&to[from_length], spaces,
- to_length - from_length);
- }
+ /* this zero-pads the destination */
+ strncpy(to, from, to_length);
+ if (from_length < to_length && !compatible) {
+ /*
+ * space pad the string if it is short.
+ */
+ memset(&to[from_length], ' ', to_length - from_length);
}
if (from_length > to_length)
printk(KERN_WARNING "%s: %s string '%s' is too long\n",
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit d6b340d7cb33c816ef4abe8143764ec5ab14a5cc upstream.
The meddlesome gcc warns about the possible shortname string in
trident driver code:
sound/pci/trident/trident.c: In function ‘snd_trident_probe’:
sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict]
strcat(card->shortname, card->driver);
It happens since gcc calculates the possible string size from
card->driver, but this can't be true since we did set the string just
before that, and they are much shorter.
For shutting it up, use the exactly same string set to card->driver
for strcat() to card->shortname, too.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/trident/trident.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -123,7 +123,7 @@ static int snd_trident_probe(struct pci_
} else {
strcpy(card->shortname, "Trident ");
}
- strcat(card->shortname, card->driver);
+ strcat(card->shortname, str);
sprintf(card->longname, "%s PCI Audio at 0x%lx, irq %d",
card->shortname, trident->port, trident->irq);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Genoud <[email protected]>
commit 77e75fda94d2ebb86aa9d35fb1860f6395bf95de upstream.
of_dma_controller_free() was not called on module onloading.
This lead to a soft lockup:
watchdog: BUG: soft lockup - CPU#0 stuck for 23s!
Modules linked in: at_hdmac [last unloaded: at_hdmac]
when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate().
Cc: [email protected]
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Acked-by: Ludovic Desroches <[email protected]>
Signed-off-by: Richard Genoud <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_hdmac.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -2152,6 +2152,8 @@ static int at_dma_remove(struct platform
struct resource *io;
at_dma_off(atdma);
+ if (pdev->dev.of_node)
+ of_dma_controller_free(pdev->dev.of_node);
dma_async_device_unregister(&atdma->dma_common);
dma_pool_destroy(atdma->memset_pool);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrick Gaskin <[email protected]>
commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream.
Add ELAN0620 to the ACPI table to support the elan touchpad in
the Lenovo IdeaPad 130-15IKB.
Signed-off-by: Patrick Gaskin <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1253,6 +1253,7 @@ static const struct acpi_device_id elan_
{ "ELAN0618", 0 },
{ "ELAN061C", 0 },
{ "ELAN061D", 0 },
+ { "ELAN0620", 0 },
{ "ELAN0622", 0 },
{ "ELAN1000", 0 },
{ }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Noah Westervelt <[email protected]>
commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream.
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.
Signed-off-by: Noah Westervelt <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1253,6 +1253,7 @@ static const struct acpi_device_id elan_
{ "ELAN0618", 0 },
{ "ELAN061C", 0 },
{ "ELAN061D", 0 },
+ { "ELAN061E", 0 },
{ "ELAN0620", 0 },
{ "ELAN0622", 0 },
{ "ELAN1000", 0 },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Rothwell <[email protected]>
commit 217c3e0196758662aa0429863b09d1c13da1c5d6 upstream.
They are too noisy
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
--- a/Makefile
+++ b/Makefile
@@ -793,6 +793,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wdecl
# disable pointer signed / unsigned warnings in gcc 4.0
KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
+# disable stringop warnings in gcc 8+
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 77d2a24b6107bd9b3bf2403a65c1428a9da83dd0 upstream.
gcc 8.1.0 complains:
lib/kobject.c:128:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length [-Wstringop-truncation]
lib/kobject.c: In function 'kobject_get_path':
lib/kobject.c:125:13: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/kobject.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -127,7 +127,7 @@ static void fill_kobj_path(struct kobjec
int cur = strlen(kobject_name(parent));
/* back up enough to print this name with '/' */
length -= cur;
- strncpy(path + length, kobject_name(parent), cur);
+ memcpy(path + length, kobject_name(parent), cur);
*(path + --length) = '/';
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pan Bian <[email protected]>
commit ecebf55d27a11538ea84aee0be643dd953f830d5 upstream.
The function ext2_xattr_set calls brelse(bh) to drop the reference count
of bh. After that, bh may be freed. However, following brelse(bh),
it reads bh->b_data via macro HDR(bh). This may result in a
use-after-free bug. This patch moves brelse(bh) after reading field.
CC: [email protected]
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext2/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -605,9 +605,9 @@ skip_replace:
}
cleanup:
- brelse(bh);
if (!(bh && header == HDR(bh)))
kfree(header);
+ brelse(bh);
up_write(&EXT2_I(inode)->xattr_sem);
return error;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sultan Alsawaf <[email protected]>
commit 000ade8016400d93b4d7c89970d96b8c14773d45 upstream.
By passing a limit of 2 bytes to strncat, strncat is limited to writing
fewer bytes than what it's supposed to append to the name here.
Since the bounds are checked on the line above this, just remove the string
bounds checks entirely since they're unneeded.
Signed-off-by: Sultan Alsawaf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_tunnel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -261,8 +261,8 @@ static struct net_device *__ip_tunnel_cr
} else {
if (strlen(ops->kind) > (IFNAMSIZ - 3))
goto failed;
- strlcpy(name, ops->kind, IFNAMSIZ);
- strncat(name, "%d", 2);
+ strcpy(name, ops->kind);
+ strcat(name, "%d");
}
ASSERT_RTNL();
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 3756f6401c302617c5e091081ca4d26ab604bec5 upstream.
gcc-8 warns about using strncpy() with the source size as the limit:
fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.
This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.
There are only 23 callsites which I all reviewed to ensure this is
currently the case. We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Suggested-by: Kees Cook <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: James Morris <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/exec.c | 7 +++----
include/linux/sched.h | 7 ++++++-
2 files changed, 9 insertions(+), 5 deletions(-)
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1077,15 +1077,14 @@ killed:
return -EAGAIN;
}
-char *get_task_comm(char *buf, struct task_struct *tsk)
+char *__get_task_comm(char *buf, size_t buf_size, struct task_struct *tsk)
{
- /* buf must be at least sizeof(tsk->comm) in size */
task_lock(tsk);
- strncpy(buf, tsk->comm, sizeof(tsk->comm));
+ strncpy(buf, tsk->comm, buf_size);
task_unlock(tsk);
return buf;
}
-EXPORT_SYMBOL_GPL(get_task_comm);
+EXPORT_SYMBOL_GPL(__get_task_comm);
/*
* These functions flushes out all traces of the currently running executable
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2668,7 +2668,12 @@ static inline void set_task_comm(struct
{
__set_task_comm(tsk, from, false);
}
-extern char *get_task_comm(char *to, struct task_struct *tsk);
+
+extern char *__get_task_comm(char *to, size_t len, struct task_struct *tsk);
+#define get_task_comm(buf, tsk) ({ \
+ BUILD_BUG_ON(sizeof(buf) != TASK_COMM_LEN); \
+ __get_task_comm(buf, sizeof(buf), tsk); \
+})
#ifdef CONFIG_SMP
void scheduler_ipi(void);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 67a3b63a54cbe18944191f43d644686731cf30c7 upstream.
gcc-8 points out a condition that almost certainly doesn't
do what the author had in mind:
drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable':
drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
This changes it to a simple bit mask operation to check
whether the bit is set.
Fixes: 026abc333205 ("gma500: initial medfield merge")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/gma500/mdfld_intel_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/gma500/mdfld_intel_display.c
+++ b/drivers/gpu/drm/gma500/mdfld_intel_display.c
@@ -99,7 +99,7 @@ void mdfldWaitForPipeEnable(struct drm_d
/* Wait for for the pipe enable to take effect. */
for (count = 0; count < COUNT_MAX; count++) {
temp = REG_READ(map->conf);
- if ((temp & PIPEACONF_PIPE_STATE) == 1)
+ if (temp & PIPEACONF_PIPE_STATE)
break;
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 8c5a50e8e7ad812a62f7ccf28d9a5e74fddf3000 upstream.
The bfa driver has a number of real issues with string termination
that gcc-8 now points out:
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.
For consistency, I'm changing the other callers of strncpy() in this
driver the same way.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Acked-by: Sudarsana Kalluru <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/bfa/bfa_fcbuild.c | 8 ++--
drivers/scsi/bfa/bfa_fcs.c | 78 +++++++++++++++++++--------------------
drivers/scsi/bfa/bfa_fcs_lport.c | 62 ++++++++++++-------------------
drivers/scsi/bfa/bfa_ioc.c | 2 -
drivers/scsi/bfa/bfa_svc.c | 4 +-
drivers/scsi/bfa/bfad.c | 20 +++++-----
drivers/scsi/bfa/bfad_attr.c | 2 -
drivers/scsi/bfa/bfad_bsg.c | 6 +--
8 files changed, 84 insertions(+), 98 deletions(-)
--- a/drivers/scsi/bfa/bfa_fcbuild.c
+++ b/drivers/scsi/bfa/bfa_fcbuild.c
@@ -1249,8 +1249,8 @@ fc_rspnid_build(struct fchs_s *fchs, voi
memset(rspnid, 0, sizeof(struct fcgs_rspnid_req_s));
rspnid->dap = s_id;
- rspnid->spn_len = (u8) strlen((char *)name);
- strncpy((char *)rspnid->spn, (char *)name, rspnid->spn_len);
+ strlcpy(rspnid->spn, name, sizeof(rspnid->spn));
+ rspnid->spn_len = (u8) strlen(rspnid->spn);
return sizeof(struct fcgs_rspnid_req_s) + sizeof(struct ct_hdr_s);
}
@@ -1270,8 +1270,8 @@ fc_rsnn_nn_build(struct fchs_s *fchs, vo
memset(rsnn_nn, 0, sizeof(struct fcgs_rsnn_nn_req_s));
rsnn_nn->node_name = node_name;
- rsnn_nn->snn_len = (u8) strlen((char *)name);
- strncpy((char *)rsnn_nn->snn, (char *)name, rsnn_nn->snn_len);
+ strlcpy(rsnn_nn->snn, name, sizeof(rsnn_nn->snn));
+ rsnn_nn->snn_len = (u8) strlen(rsnn_nn->snn);
return sizeof(struct fcgs_rsnn_nn_req_s) + sizeof(struct ct_hdr_s);
}
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -831,23 +831,23 @@ bfa_fcs_fabric_psymb_init(struct bfa_fcs
bfa_ioc_get_adapter_model(&fabric->fcs->bfa->ioc, model);
/* Model name/number */
- strncpy((char *)&port_cfg->sym_name, model,
- BFA_FCS_PORT_SYMBNAME_MODEL_SZ);
- strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ strlcpy(port_cfg->sym_name.symname, model,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->sym_name.symname, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ BFA_SYMNAME_MAXLEN);
/* Driver Version */
- strncat((char *)&port_cfg->sym_name, (char *)driver_info->version,
- BFA_FCS_PORT_SYMBNAME_VERSION_SZ);
- strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ strlcat(port_cfg->sym_name.symname, driver_info->version,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->sym_name.symname, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ BFA_SYMNAME_MAXLEN);
/* Host machine name */
- strncat((char *)&port_cfg->sym_name,
- (char *)driver_info->host_machine_name,
- BFA_FCS_PORT_SYMBNAME_MACHINENAME_SZ);
- strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ strlcat(port_cfg->sym_name.symname,
+ driver_info->host_machine_name,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->sym_name.symname, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ BFA_SYMNAME_MAXLEN);
/*
* Host OS Info :
@@ -855,24 +855,24 @@ bfa_fcs_fabric_psymb_init(struct bfa_fcs
* OS name string and instead copy the entire OS info string (64 bytes).
*/
if (driver_info->host_os_patch[0] == '\0') {
- strncat((char *)&port_cfg->sym_name,
- (char *)driver_info->host_os_name,
- BFA_FCS_OS_STR_LEN);
- strncat((char *)&port_cfg->sym_name,
+ strlcat(port_cfg->sym_name.symname,
+ driver_info->host_os_name,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->sym_name.symname,
BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ BFA_SYMNAME_MAXLEN);
} else {
- strncat((char *)&port_cfg->sym_name,
- (char *)driver_info->host_os_name,
- BFA_FCS_PORT_SYMBNAME_OSINFO_SZ);
- strncat((char *)&port_cfg->sym_name,
+ strlcat(port_cfg->sym_name.symname,
+ driver_info->host_os_name,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->sym_name.symname,
BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ BFA_SYMNAME_MAXLEN);
/* Append host OS Patch Info */
- strncat((char *)&port_cfg->sym_name,
- (char *)driver_info->host_os_patch,
- BFA_FCS_PORT_SYMBNAME_OSPATCH_SZ);
+ strlcat(port_cfg->sym_name.symname,
+ driver_info->host_os_patch,
+ BFA_SYMNAME_MAXLEN);
}
/* null terminate */
@@ -892,26 +892,26 @@ bfa_fcs_fabric_nsymb_init(struct bfa_fcs
bfa_ioc_get_adapter_model(&fabric->fcs->bfa->ioc, model);
/* Model name/number */
- strncpy((char *)&port_cfg->node_sym_name, model,
- BFA_FCS_PORT_SYMBNAME_MODEL_SZ);
- strncat((char *)&port_cfg->node_sym_name,
+ strlcpy(port_cfg->node_sym_name.symname, model,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->node_sym_name.symname,
BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ BFA_SYMNAME_MAXLEN);
/* Driver Version */
- strncat((char *)&port_cfg->node_sym_name, (char *)driver_info->version,
- BFA_FCS_PORT_SYMBNAME_VERSION_SZ);
- strncat((char *)&port_cfg->node_sym_name,
+ strlcat(port_cfg->node_sym_name.symname, (char *)driver_info->version,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->node_sym_name.symname,
BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ BFA_SYMNAME_MAXLEN);
/* Host machine name */
- strncat((char *)&port_cfg->node_sym_name,
- (char *)driver_info->host_machine_name,
- BFA_FCS_PORT_SYMBNAME_MACHINENAME_SZ);
- strncat((char *)&port_cfg->node_sym_name,
+ strlcat(port_cfg->node_sym_name.symname,
+ driver_info->host_machine_name,
+ BFA_SYMNAME_MAXLEN);
+ strlcat(port_cfg->node_sym_name.symname,
BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ BFA_SYMNAME_MAXLEN);
/* null terminate */
port_cfg->node_sym_name.symname[BFA_SYMNAME_MAXLEN - 1] = 0;
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -2630,10 +2630,10 @@ bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_
bfa_ioc_get_adapter_fw_ver(&port->fcs->bfa->ioc,
hba_attr->fw_version);
- strncpy(hba_attr->driver_version, (char *)driver_info->version,
+ strlcpy(hba_attr->driver_version, (char *)driver_info->version,
sizeof(hba_attr->driver_version));
- strncpy(hba_attr->os_name, driver_info->host_os_name,
+ strlcpy(hba_attr->os_name, driver_info->host_os_name,
sizeof(hba_attr->os_name));
/*
@@ -2641,23 +2641,23 @@ bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_
* to the os name along with a separator
*/
if (driver_info->host_os_patch[0] != '\0') {
- strncat(hba_attr->os_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
- sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
- strncat(hba_attr->os_name, driver_info->host_os_patch,
- sizeof(driver_info->host_os_patch));
+ strlcat(hba_attr->os_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(hba_attr->os_name));
+ strlcat(hba_attr->os_name, driver_info->host_os_patch,
+ sizeof(hba_attr->os_name));
}
/* Retrieve the max frame size from the port attr */
bfa_fcs_fdmi_get_portattr(fdmi, &fcs_port_attr);
hba_attr->max_ct_pyld = fcs_port_attr.max_frm_size;
- strncpy(hba_attr->node_sym_name.symname,
+ strlcpy(hba_attr->node_sym_name.symname,
port->port_cfg.node_sym_name.symname, BFA_SYMNAME_MAXLEN);
strcpy(hba_attr->vendor_info, "BROCADE");
hba_attr->num_ports =
cpu_to_be32(bfa_ioc_get_nports(&port->fcs->bfa->ioc));
hba_attr->fabric_name = port->fabric->lps->pr_nwwn;
- strncpy(hba_attr->bios_ver, hba_attr->option_rom_ver, BFA_VERSION_LEN);
+ strlcpy(hba_attr->bios_ver, hba_attr->option_rom_ver, BFA_VERSION_LEN);
}
@@ -2724,20 +2724,20 @@ bfa_fcs_fdmi_get_portattr(struct bfa_fcs
/*
* OS device Name
*/
- strncpy(port_attr->os_device_name, (char *)driver_info->os_device_name,
+ strlcpy(port_attr->os_device_name, driver_info->os_device_name,
sizeof(port_attr->os_device_name));
/*
* Host name
*/
- strncpy(port_attr->host_name, (char *)driver_info->host_machine_name,
+ strlcpy(port_attr->host_name, driver_info->host_machine_name,
sizeof(port_attr->host_name));
port_attr->node_name = bfa_fcs_lport_get_nwwn(port);
port_attr->port_name = bfa_fcs_lport_get_pwwn(port);
- strncpy(port_attr->port_sym_name.symname,
- (char *)&bfa_fcs_lport_get_psym_name(port), BFA_SYMNAME_MAXLEN);
+ strlcpy(port_attr->port_sym_name.symname,
+ bfa_fcs_lport_get_psym_name(port).symname, BFA_SYMNAME_MAXLEN);
bfa_fcs_lport_get_attr(port, &lport_attr);
port_attr->port_type = cpu_to_be32(lport_attr.port_type);
port_attr->scos = pport_attr.cos_supported;
@@ -3217,7 +3217,7 @@ bfa_fcs_lport_ms_gmal_response(void *fcs
rsp_str[gmal_entry->len-1] = 0;
/* copy IP Address to fabric */
- strncpy(bfa_fcs_lport_get_fabric_ipaddr(port),
+ strlcpy(bfa_fcs_lport_get_fabric_ipaddr(port),
gmal_entry->ip_addr,
BFA_FCS_FABRIC_IPADDR_SZ);
break;
@@ -4655,21 +4655,13 @@ bfa_fcs_lport_ns_send_rspn_id(void *ns_c
* to that of the base port.
*/
- strncpy((char *)psymbl,
- (char *) &
- (bfa_fcs_lport_get_psym_name
+ strlcpy(symbl,
+ (char *)&(bfa_fcs_lport_get_psym_name
(bfa_fcs_get_base_port(port->fcs))),
- strlen((char *) &
- bfa_fcs_lport_get_psym_name(bfa_fcs_get_base_port
- (port->fcs))));
-
- /* Ensure we have a null terminating string. */
- ((char *)psymbl)[strlen((char *) &
- bfa_fcs_lport_get_psym_name(bfa_fcs_get_base_port
- (port->fcs)))] = 0;
- strncat((char *)psymbl,
- (char *) &(bfa_fcs_lport_get_psym_name(port)),
- strlen((char *) &bfa_fcs_lport_get_psym_name(port)));
+ sizeof(symbl));
+
+ strlcat(symbl, (char *)&(bfa_fcs_lport_get_psym_name(port)),
+ sizeof(symbl));
} else {
psymbl = (u8 *) &(bfa_fcs_lport_get_psym_name(port));
}
@@ -5161,7 +5153,6 @@ bfa_fcs_lport_ns_util_send_rspn_id(void
struct fchs_s fchs;
struct bfa_fcxp_s *fcxp;
u8 symbl[256];
- u8 *psymbl = &symbl[0];
int len;
/* Avoid sending RSPN in the following states. */
@@ -5191,22 +5182,17 @@ bfa_fcs_lport_ns_util_send_rspn_id(void
* For Vports, we append the vport's port symbolic name
* to that of the base port.
*/
- strncpy((char *)psymbl, (char *)&(bfa_fcs_lport_get_psym_name
+ strlcpy(symbl, (char *)&(bfa_fcs_lport_get_psym_name
(bfa_fcs_get_base_port(port->fcs))),
- strlen((char *)&bfa_fcs_lport_get_psym_name(
- bfa_fcs_get_base_port(port->fcs))));
-
- /* Ensure we have a null terminating string. */
- ((char *)psymbl)[strlen((char *)&bfa_fcs_lport_get_psym_name(
- bfa_fcs_get_base_port(port->fcs)))] = 0;
+ sizeof(symbl));
- strncat((char *)psymbl,
+ strlcat(symbl,
(char *)&(bfa_fcs_lport_get_psym_name(port)),
- strlen((char *)&bfa_fcs_lport_get_psym_name(port)));
+ sizeof(symbl));
}
len = fc_rspnid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
- bfa_fcs_lport_get_fcid(port), 0, psymbl);
+ bfa_fcs_lport_get_fcid(port), 0, symbl);
bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -2802,7 +2802,7 @@ void
bfa_ioc_get_adapter_manufacturer(struct bfa_ioc_s *ioc, char *manufacturer)
{
memset((void *)manufacturer, 0, BFA_ADAPTER_MFG_NAME_LEN);
- memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
+ strlcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN);
}
void
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -365,8 +365,8 @@ bfa_plog_str(struct bfa_plog_s *plog, en
lp.eid = event;
lp.log_type = BFA_PL_LOG_TYPE_STRING;
lp.misc = misc;
- strncpy(lp.log_entry.string_log, log_str,
- BFA_PL_STRING_LOG_SZ - 1);
+ strlcpy(lp.log_entry.string_log, log_str,
+ BFA_PL_STRING_LOG_SZ);
lp.log_entry.string_log[BFA_PL_STRING_LOG_SZ - 1] = '\0';
bfa_plog_add(plog, &lp);
}
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -987,20 +987,20 @@ bfad_start_ops(struct bfad_s *bfad) {
/* Fill the driver_info info to fcs*/
memset(&driver_info, 0, sizeof(driver_info));
- strncpy(driver_info.version, BFAD_DRIVER_VERSION,
- sizeof(driver_info.version) - 1);
+ strlcpy(driver_info.version, BFAD_DRIVER_VERSION,
+ sizeof(driver_info.version));
if (host_name)
- strncpy(driver_info.host_machine_name, host_name,
- sizeof(driver_info.host_machine_name) - 1);
+ strlcpy(driver_info.host_machine_name, host_name,
+ sizeof(driver_info.host_machine_name));
if (os_name)
- strncpy(driver_info.host_os_name, os_name,
- sizeof(driver_info.host_os_name) - 1);
+ strlcpy(driver_info.host_os_name, os_name,
+ sizeof(driver_info.host_os_name));
if (os_patch)
- strncpy(driver_info.host_os_patch, os_patch,
- sizeof(driver_info.host_os_patch) - 1);
+ strlcpy(driver_info.host_os_patch, os_patch,
+ sizeof(driver_info.host_os_patch));
- strncpy(driver_info.os_device_name, bfad->pci_name,
- sizeof(driver_info.os_device_name) - 1);
+ strlcpy(driver_info.os_device_name, bfad->pci_name,
+ sizeof(driver_info.os_device_name));
/* FCS driver info init */
spin_lock_irqsave(&bfad->bfad_lock, flags);
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -842,7 +842,7 @@ bfad_im_symbolic_name_show(struct device
char symname[BFA_SYMNAME_MAXLEN];
bfa_fcs_lport_get_attr(&bfad->bfa_fcs.fabric.bport, &port_attr);
- strncpy(symname, port_attr.port_cfg.sym_name.symname,
+ strlcpy(symname, port_attr.port_cfg.sym_name.symname,
BFA_SYMNAME_MAXLEN);
return snprintf(buf, PAGE_SIZE, "%s\n", symname);
}
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -126,7 +126,7 @@ bfad_iocmd_ioc_get_attr(struct bfad_s *b
/* fill in driver attr info */
strcpy(iocmd->ioc_attr.driver_attr.driver, BFAD_DRIVER_NAME);
- strncpy(iocmd->ioc_attr.driver_attr.driver_ver,
+ strlcpy(iocmd->ioc_attr.driver_attr.driver_ver,
BFAD_DRIVER_VERSION, BFA_VERSION_LEN);
strcpy(iocmd->ioc_attr.driver_attr.fw_ver,
iocmd->ioc_attr.adapter_attr.fw_ver);
@@ -314,9 +314,9 @@ bfad_iocmd_port_get_attr(struct bfad_s *
iocmd->attr.port_type = port_attr.port_type;
iocmd->attr.loopback = port_attr.loopback;
iocmd->attr.authfail = port_attr.authfail;
- strncpy(iocmd->attr.port_symname.symname,
+ strlcpy(iocmd->attr.port_symname.symname,
port_attr.port_cfg.sym_name.symname,
- sizeof(port_attr.port_cfg.sym_name.symname));
+ sizeof(iocmd->attr.port_symname.symname));
iocmd->status = BFA_STATUS_OK;
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 829383e183728dec7ed9150b949cd6de64127809 ]
memunmap() should be used to free the return of memremap(), not
iounmap().
Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 49b266433f4c..7feaa82f8c7c 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2977,7 +2977,7 @@ static int copy_context_table(struct intel_iommu *iommu,
}
if (old_ce)
- iounmap(old_ce);
+ memunmap(old_ce);
ret = 0;
if (devfn < 0x80)
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cameron Gutman <[email protected]>
commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream.
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.
[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116
Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers")
Cc: [email protected]
Signed-off-by: Cameron Gutman <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/joystick/xpad.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -483,18 +483,18 @@ static const u8 xboxone_hori_init[] = {
};
/*
- * This packet is required for some of the PDP pads to start
+ * This packet is required for most (all?) of the PDP pads to start
* sending input reports. These pads include: (0x0e6f:0x02ab),
- * (0x0e6f:0x02a4).
+ * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
*/
static const u8 xboxone_pdp_init1[] = {
0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
};
/*
- * This packet is required for some of the PDP pads to start
+ * This packet is required for most (all?) of the PDP pads to start
* sending input reports. These pads include: (0x0e6f:0x02ab),
- * (0x0e6f:0x02a4).
+ * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
*/
static const u8 xboxone_pdp_init2[] = {
0x06, 0x20, 0x00, 0x02, 0x01, 0x00
@@ -530,12 +530,8 @@ static const struct xboxone_init_packet
XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
- XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
- XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
- XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1),
- XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2),
- XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1),
- XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2),
XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ]
The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_int.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 9cc9d62c1fec..8b15a018d625 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -177,6 +177,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn)
*/
do {
index = p_sb_attn->sb_index;
+ /* finish reading index before the loop condition */
+ dma_rmb();
attn_bits = le32_to_cpu(p_sb_attn->atten_bits);
attn_acks = le32_to_cpu(p_sb_attn->atten_ack);
} while (index != p_sb_attn->sb_index);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <[email protected]>
commit 2d88a331e48095cf60ad9bdf3177bd401bf99727 upstream.
In case of error, the function gpio_to_desc() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/leds/leds-gpio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -118,8 +118,8 @@ static int create_gpio_led(const struct
return ret;
led_dat->gpiod = gpio_to_desc(template->gpio);
- if (IS_ERR(led_dat->gpiod))
- return PTR_ERR(led_dat->gpiod);
+ if (!led_dat->gpiod)
+ return -EINVAL;
}
led_dat->cdev.name = template->name;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Genoud <[email protected]>
commit 98f5f932254b88ce828bc8e4d1642d14e5854caa upstream.
The leak was found when opening/closing a serial port a great number of
time, increasing kmalloc-32 in slabinfo.
Each time the port was opened, dma_request_slave_channel() was called.
Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and
never freed. (Well, it was free at module unload, but that's not what we
want).
So, here, kzalloc is more suited for the job since it has to be freed in
atc_free_chan_resources().
Cc: [email protected]
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Reported-by: Mario Forner <[email protected]>
Suggested-by: Alexandre Belloni <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Signed-off-by: Richard Genoud <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_hdmac.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -1781,6 +1781,12 @@ static void atc_free_chan_resources(stru
atchan->descs_allocated = 0;
atchan->status = 0;
+ /*
+ * Free atslave allocated in at_dma_xlate()
+ */
+ kfree(chan->private);
+ chan->private = NULL;
+
dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
}
@@ -1815,7 +1821,7 @@ static struct dma_chan *at_dma_xlate(str
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
+ atslave = kzalloc(sizeof(*atslave), GFP_KERNEL);
if (!atslave)
return NULL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
commit 3deef52ce10514ccdebba8e8ab85f9cebd0eb3f7 upstream.
It's similar to other AMD audio devices, it also supports D3, which can
save some power drain.
Signed-off-by: Kai-Heng Feng <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2363,6 +2363,10 @@ static const struct pci_device_id azx_id
/* AMD Hudson */
{ PCI_DEVICE(0x1022, 0x780d),
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB },
+ /* AMD Stoney */
+ { PCI_DEVICE(0x1022, 0x157a),
+ .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB |
+ AZX_DCAPS_PM_RUNTIME },
/* AMD Raven */
{ PCI_DEVICE(0x1022, 0x15e3),
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB |
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
commit 6484a677294aa5d08c0210f2f387ebb9be646115 upstream.
gcc '-Wunused-but-set-variable' warning:
drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup':
drivers/misc/mic/scif/scif_rma.c:373:25: warning:
variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable]
'vmalloc_num_pages' should be used to determine if the address is
within the vmalloc range.
Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Signed-off-by: YueHaibing <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mic/scif/scif_rma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/mic/scif/scif_rma.c
+++ b/drivers/misc/mic/scif/scif_rma.c
@@ -414,7 +414,7 @@ static int scif_create_remote_lookup(str
if (err)
goto error_window;
err = scif_map_page(&window->num_pages_lookup.lookup[j],
- vmalloc_dma_phys ?
+ vmalloc_num_pages ?
vmalloc_to_page(&window->num_pages[i]) :
virt_to_page(&window->num_pages[i]),
remote_dev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bin Liu <[email protected]>
commit 59861547ec9a9736e7882f6fb0c096a720ff811a upstream.
The driver defines three states for a cppi channel.
- idle: .chan_busy == 0 && not in .pending list
- pending: .chan_busy == 0 && in .pending list
- busy: .chan_busy == 1 && not in .pending list
There are cases in which the cppi channel could be in the pending state
when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
is called.
cppi41_stop_chan() has a bug for these cases to set channels to idle state.
It only checks the .chan_busy flag, but not the .pending list, then later
when cppi41_runtime_resume() is called the channels in .pending list will
be transitioned to busy state.
Removing channels from the .pending list solves the problem.
Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy")
Cc: [email protected] # v3.15+
Signed-off-by: Bin Liu <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/cppi41.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -628,8 +628,22 @@ static int cppi41_stop_chan(struct dma_c
desc_phys = lower_32_bits(c->desc_phys);
desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc);
- if (!cdd->chan_busy[desc_num])
+ if (!cdd->chan_busy[desc_num]) {
+ struct cppi41_channel *cc, *_ct;
+
+ /*
+ * channels might still be in the pendling list if
+ * cppi41_dma_issue_pending() is called after
+ * cppi41_runtime_suspend() is called
+ */
+ list_for_each_entry_safe(cc, _ct, &cdd->pending, node) {
+ if (cc != c)
+ continue;
+ list_del(&cc->node);
+ break;
+ }
return 0;
+ }
ret = cppi41_tear_down_chan(c);
if (ret)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 68c8d209cd4337da4fa04c672f0b62bb735969bc ]
Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.
Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <[email protected]>
Signed-off-by: Chris Paterson <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/rcar_can.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/rcar_can.c b/drivers/net/can/rcar_can.c
index bc46be39549d..9d93492ddfcc 100644
--- a/drivers/net/can/rcar_can.c
+++ b/drivers/net/can/rcar_can.c
@@ -24,6 +24,9 @@
#define RCAR_CAN_DRV_NAME "rcar_can"
+#define RCAR_SUPPORTED_CLOCKS (BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
+ BIT(CLKR_CLKEXT))
+
/* Mailbox configuration:
* mailbox 60 - 63 - Rx FIFO mailboxes
* mailbox 56 - 59 - Tx FIFO mailboxes
@@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev)
goto fail_clk;
}
- if (clock_select >= ARRAY_SIZE(clock_names)) {
+ if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
err = -EINVAL;
dev_err(&pdev->dev, "invalid CAN clock selected\n");
goto fail_clk;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Brodkin <[email protected]>
commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream.
By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.
In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".
Signed-off-by: Alexey Brodkin <[email protected]>
Cc: Cupertino Miranda <[email protected]>
Cc: [email protected] #4.14+
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/configs/axs101_defconfig | 1 +
arch/arc/configs/axs103_defconfig | 1 +
arch/arc/configs/axs103_smp_defconfig | 1 +
arch/arc/configs/nsimosci_defconfig | 1 +
arch/arc/configs/nsimosci_hs_defconfig | 1 +
arch/arc/configs/nsimosci_hs_smp_defconfig | 1 +
arch/arc/configs/vdk_hs38_defconfig | 1 +
arch/arc/configs/vdk_hs38_smp_defconfig | 1 +
8 files changed, 8 insertions(+)
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -98,6 +98,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -103,6 +103,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -104,6 +104,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -70,5 +70,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -69,5 +69,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -88,6 +88,7 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FTRACE=y
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -89,6 +89,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -91,6 +91,7 @@ CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Wong <[email protected]>
commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream.
Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.
Signed-off-by: Adam Wong <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1255,6 +1255,7 @@ static const struct acpi_device_id elan_
{ "ELAN061D", 0 },
{ "ELAN061E", 0 },
{ "ELAN0620", 0 },
+ { "ELAN0621", 0 },
{ "ELAN0622", 0 },
{ "ELAN1000", 0 },
{ }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Macpaul Lin <[email protected]>
commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream.
This patch is trying to fix KE issue due to
"BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198"
reported by Syzkaller scan."
[26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198
[26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364
[26364:syz-executor0][name:report&]
[26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0
[26364:syz-executor0]Call trace:
[26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470
[26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30
[26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128
[26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8
[26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390
[26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20
[26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198
[26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270
[26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90
[26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158
[26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8
[26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0
[26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0
[26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8
[26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208
[26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]The buggy address belongs to the variable:
[26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]Memory state around the buggy address:
[26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
[26364:syz-executor0][name:report&] ^
[26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
[26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint
[26364:syz-executor0]------------[cut here]------------
After checking the source code, we've found there might be an out-of-bounds
access to "config[len - 1]" array when the variable "len" is zero.
Signed-off-by: Macpaul Lin <[email protected]>
Acked-by: Daniel Thompson <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/kgdboc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -232,7 +232,7 @@ static void kgdboc_put_char(u8 chr)
static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
{
- int len = strlen(kmessage);
+ size_t len = strlen(kmessage);
if (len >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdboc: config string too long\n");
@@ -254,7 +254,7 @@ static int param_set_kgdboc_var(const ch
strcpy(config, kmessage);
/* Chop out \n char as a result of echo */
- if (config[len - 1] == '\n')
+ if (len && config[len - 1] == '\n')
config[len - 1] = '\0';
if (configured == 1)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chanho Min <[email protected]>
commit b888a5f713e4d17faaaff24316585a4eb07f35b7 upstream.
Commit 67ec1072b053 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM
stream") fixes deadlock for non-atomic PCM stream. But, This patch
causes antother stuck.
If writer is RT thread and reader is a normal thread, the reader
thread will be difficult to get scheduled. It may not give chance to
release readlocks and writer gets stuck for a long time if they are
pinned to single cpu.
The deadlock described in the previous commit is because the linux
rwsem queues like a FIFO. So, we might need non-FIFO writelock, not
non-block one.
My suggestion is that the writer gives reader a chance to be scheduled
by using the minimum msleep() instaed of spinning without blocking by
writer. Also, The *_nonblock may be changed to *_nonfifo appropriately
to this concept.
In terms of performance, when trylock is failed, this minimum periodic
msleep will have the same performance as the tick-based
schedule()/wake_up_q().
[ Although this has a fairly high performance penalty, the relevant
code path became already rare due to the previous commit ("ALSA:
pcm: Call snd_pcm_unlink() conditionally at closing"). That is, now
this unconditional msleep appears only when using linked streams,
and this must be a rare case. So we accept this as a quick
workaround until finding a more suitable one -- tiwai ]
Fixes: 67ec1072b053 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream")
Suggested-by: Wonmin Jung <[email protected]>
Signed-off-by: Chanho Min <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/pcm_native.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -35,6 +35,7 @@
#include <sound/timer.h>
#include <sound/minors.h>
#include <linux/uio.h>
+#include <linux/delay.h>
/*
* Compatibility
@@ -78,12 +79,12 @@ static DECLARE_RWSEM(snd_pcm_link_rwsem)
* and this may lead to a deadlock when the code path takes read sem
* twice (e.g. one in snd_pcm_action_nonatomic() and another in
* snd_pcm_stream_lock()). As a (suboptimal) workaround, let writer to
- * spin until it gets the lock.
+ * sleep until all the readers are completed without blocking by writer.
*/
-static inline void down_write_nonblock(struct rw_semaphore *lock)
+static inline void down_write_nonfifo(struct rw_semaphore *lock)
{
while (!down_write_trylock(lock))
- cond_resched();
+ msleep(1);
}
/**
@@ -1825,7 +1826,7 @@ static int snd_pcm_link(struct snd_pcm_s
res = -ENOMEM;
goto _nolock;
}
- down_write_nonblock(&snd_pcm_link_rwsem);
+ down_write_nonfifo(&snd_pcm_link_rwsem);
write_lock_irq(&snd_pcm_link_rwlock);
if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN ||
substream->runtime->status->state != substream1->runtime->status->state ||
@@ -1872,7 +1873,7 @@ static int snd_pcm_unlink(struct snd_pcm
struct snd_pcm_substream *s;
int res = 0;
- down_write_nonblock(&snd_pcm_link_rwsem);
+ down_write_nonfifo(&snd_pcm_link_rwsem);
write_lock_irq(&snd_pcm_link_rwlock);
if (!snd_pcm_stream_linked(substream)) {
res = -EALREADY;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Halil Pasic <[email protected]>
commit 2448a299ec416a80f699940a86f4a6d9a4f643b1 upstream.
Currently we have a race on vcdev->config in virtio_ccw_get_config() and
in virtio_ccw_set_config().
This normally does not cause problems, as these are usually infrequent
operations. However, for some devices writing to/reading from the config
space can be triggered through sysfs attributes. For these, userspace can
force the race by increasing the frequency.
Signed-off-by: Halil Pasic <[email protected]>
Cc: [email protected]
Message-Id: <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/virtio/virtio_ccw.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -833,6 +833,7 @@ static void virtio_ccw_get_config(struct
int ret;
struct ccw1 *ccw;
void *config_area;
+ unsigned long flags;
ccw = kzalloc(sizeof(*ccw), GFP_DMA | GFP_KERNEL);
if (!ccw)
@@ -851,11 +852,13 @@ static void virtio_ccw_get_config(struct
if (ret)
goto out_free;
+ spin_lock_irqsave(&vcdev->lock, flags);
memcpy(vcdev->config, config_area, offset + len);
- if (buf)
- memcpy(buf, &vcdev->config[offset], len);
if (vcdev->config_ready < offset + len)
vcdev->config_ready = offset + len;
+ spin_unlock_irqrestore(&vcdev->lock, flags);
+ if (buf)
+ memcpy(buf, config_area + offset, len);
out_free:
kfree(config_area);
@@ -869,6 +872,7 @@ static void virtio_ccw_set_config(struct
struct virtio_ccw_device *vcdev = to_vc_device(vdev);
struct ccw1 *ccw;
void *config_area;
+ unsigned long flags;
ccw = kzalloc(sizeof(*ccw), GFP_DMA | GFP_KERNEL);
if (!ccw)
@@ -881,9 +885,11 @@ static void virtio_ccw_set_config(struct
/* Make sure we don't overwrite fields. */
if (vcdev->config_ready < offset)
virtio_ccw_get_config(vdev, 0, NULL, offset);
+ spin_lock_irqsave(&vcdev->lock, flags);
memcpy(&vcdev->config[offset], buf, len);
/* Write the config area to the host. */
memcpy(config_area, vcdev->config, sizeof(vcdev->config));
+ spin_unlock_irqrestore(&vcdev->lock, flags);
ccw->cmd_code = CCW_CMD_WRITE_CONF;
ccw->flags = 0;
ccw->count = offset + len;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <[email protected]>
commit c988de29ca161823db6a7125e803d597ef75b49c upstream.
Make sure to use the CIFS_DIR_SEP(cifs_sb) as path separator for
prefixpath too. Fixes a bug with smb1 UNIX extensions.
Fixes: a6b5058fafdf ("fs/cifs: make share unaccessible at root level mountable")
Signed-off-by: Paulo Alcantara <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/dir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -163,7 +163,7 @@ cifs_bp_rename_retry:
cifs_dbg(FYI, "using cifs_sb prepath <%s>\n", cifs_sb->prepath);
memcpy(full_path+dfsplen+1, cifs_sb->prepath, pplen-1);
- full_path[dfsplen] = '\\';
+ full_path[dfsplen] = dirsep;
for (i = 0; i < pplen-1; i++)
if (full_path[dfsplen+1+i] == '/')
full_path[dfsplen+1+i] = CIFS_DIR_SEP(cifs_sb);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasyl Vavrychuk <[email protected]>
commit a1881c9b8a1edef0a5ae1d5c1b61406fe3402114 upstream.
Otherwise if network manager starts configuring Wi-Fi interface
immidiatelly after getting notification of its creation, we will get
NULL pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff95ae94c8>] hrtimer_active+0x28/0x50
...
Call Trace:
[<ffffffff95ae9997>] ? hrtimer_try_to_cancel+0x27/0x110
[<ffffffff95ae9a95>] ? hrtimer_cancel+0x15/0x20
[<ffffffffc0803bf0>] ? mac80211_hwsim_config+0x140/0x1c0 [mac80211_hwsim]
Cc: [email protected]
Signed-off-by: Vasyl Vavrychuk <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2515,6 +2515,10 @@ static int mac80211_hwsim_new_radio(stru
if (param->no_vif)
ieee80211_hw_set(hw, NO_AUTO_VIF);
+ tasklet_hrtimer_init(&data->beacon_timer,
+ mac80211_hwsim_beacon,
+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+
err = ieee80211_register_hw(hw);
if (err < 0) {
printk(KERN_DEBUG "mac80211_hwsim: ieee80211_register_hw failed (%d)\n",
@@ -2539,10 +2543,6 @@ static int mac80211_hwsim_new_radio(stru
data->debugfs,
data, &hwsim_simulate_radar);
- tasklet_hrtimer_init(&data->beacon_timer,
- mac80211_hwsim_beacon,
- CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
-
spin_lock_bh(&hwsim_radio_lock);
list_add_tail(&data->list, &hwsim_radios);
spin_unlock_bh(&hwsim_radio_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit 9ec1190d065998650fd9260dea8cf3e1f56c0e8c upstream.
If the buffered broadcast queue contains packets, letting new packets bypass
that queue can lead to heavy reordering, since the driver is probably throttling
transmission of buffered multicast packets after beacons.
Keep buffering packets until the buffer has been cleared (and no client
is in powersave mode).
Cc: [email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/tx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -431,8 +431,8 @@ ieee80211_tx_h_multicast_ps_buf(struct i
if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL))
info->hw_queue = tx->sdata->vif.cab_queue;
- /* no stations in PS mode */
- if (!atomic_read(&ps->num_sta_ps))
+ /* no stations in PS mode and no buffered packets */
+ if (!atomic_read(&ps->num_sta_ps) && skb_queue_empty(&ps->bc_buf))
return TX_CONTINUE;
info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit a317e65face482371de30246b6494feb093ff7f9 upstream.
Make it behave like regular ieee80211_tx_status calls, except for the lack of
filtered frame processing.
This fixes spurious low-ack triggered disconnections with powersave clients
connected to an AP.
Fixes: f027c2aca0cf4 ("mac80211: add ieee80211_tx_status_noskb")
Cc: [email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/status.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -648,6 +648,8 @@ void ieee80211_tx_status_noskb(struct ie
/* Track when last TDLS packet was ACKed */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
sta->status_stats.last_tdls_pkt_time = jiffies;
+ } else if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
+ return;
} else {
ieee80211_lost_packet(sta, info);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
commit 990d71846a0b7281bd933c34d734e6afc7408e7e upstream.
NullFunc packets should never be duplicate just like
QoS-NullFunc packets.
We saw a client that enters / exits power save with
NullFunc frames (and not with QoS-NullFunc) despite the
fact that the association supports HT.
This specific client also re-uses a non-zero sequence number
for different NullFunc frames.
At some point, the client had to send a retransmission of
the NullFunc frame and we dropped it, leading to a
misalignment in the power save state.
Fix this by never consider a NullFunc frame as duplicate,
just like we do for QoS NullFunc frames.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449
CC: <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/rx.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1109,6 +1109,7 @@ ieee80211_rx_h_check_dup(struct ieee8021
return RX_CONTINUE;
if (ieee80211_is_ctl(hdr->frame_control) ||
+ ieee80211_is_nullfunc(hdr->frame_control) ||
ieee80211_is_qos_nullfunc(hdr->frame_control) ||
is_multicast_ether_addr(hdr->addr1))
return RX_CONTINUE;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Greear <[email protected]>
commit 5c21e8100dfd57c806e833ae905e26efbb87840f upstream.
This fixes stale beacon-int values that would keep a netdev
from going up.
To reproduce:
Create two VAP on one radio.
vap1 has beacon-int 100, start it.
vap2 has beacon-int 240, start it (and it will fail
because beacon-int mismatch).
reconfigure vap2 to have beacon-int 100 and start it.
It will fail because the stale beacon-int 240 will be used
in the ifup path and hostapd never gets a chance to set the
new beacon interval.
Cc: [email protected]
Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/iface.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -987,6 +987,8 @@ static void ieee80211_do_stop(struct iee
if (local->open_count == 0)
ieee80211_clear_tx_pending(local);
+ sdata->vif.bss_conf.beacon_int = 0;
+
/*
* If the interface goes down while suspended, presumably because
* the device was unplugged and that happens before our resume,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e5b78f2e349eef5d4fca5dc1cf5a3b4b2cc27abd ]
If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:
ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
sata_rcar ee300000.sata: Unable to initialize IPMMU context
iommu: Failed to add device ee300000.sata to group 0: -22
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
Call trace:
ipmmu_domain_free+0x1c/0xa0
iommu_group_release+0x48/0x68
kobject_put+0x74/0xe8
kobject_del.part.0+0x3c/0x50
kobject_put+0x60/0xe8
iommu_group_get_for_dev+0xa8/0x1f0
ipmmu_add_device+0x1c/0x40
of_iommu_configure+0x118/0x190
Fix this by checking if the domain's context already exists, before
trying to destroy it.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Fixes: d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/ipmmu-vmsa.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 624e7ff76166..9101be1a6b59 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -372,6 +372,9 @@ static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain)
static void ipmmu_domain_destroy_context(struct ipmmu_vmsa_domain *domain)
{
+ if (!domain->mmu)
+ return;
+
/*
* Disable the context. Flush the TLB as required when modifying the
* context registers.
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chuck Lever <[email protected]>
commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 upstream.
call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.
Signed-off-by: Chuck Lever <[email protected]>
Cc: [email protected]
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/auth_gss/auth_gss.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1722,6 +1722,7 @@ priv_release_snd_buf(struct rpc_rqst *rq
for (i=0; i < rqstp->rq_enc_pages_num; i++)
__free_page(rqstp->rq_enc_pages[i]);
kfree(rqstp->rq_enc_pages);
+ rqstp->rq_release_snd_buf = NULL;
}
static int
@@ -1730,6 +1731,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp)
struct xdr_buf *snd_buf = &rqstp->rq_snd_buf;
int first, last, i;
+ if (rqstp->rq_release_snd_buf)
+ rqstp->rq_release_snd_buf(rqstp);
+
if (snd_buf->page_len == 0) {
rqstp->rq_enc_pages_num = 0;
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Simon Guo <[email protected]>
commit b155b4fde5bdde9fed439cd1f5ea07173df2ed31 upstream.
When one vma was with flag VM_LOCKED|VM_LOCKONFAULT (by invoking
mlock2(,MLOCK_ONFAULT)), it can again be populated with mlock() with
VM_LOCKED flag only.
There is a hole in mlock_fixup() which increase mm->locked_vm twice even
the two operations are on the same vma and both with VM_LOCKED flags.
The issue can be reproduced by following code:
mlock2(p, 1024 * 64, MLOCK_ONFAULT); //VM_LOCKED|VM_LOCKONFAULT
mlock(p, 1024 * 64); //VM_LOCKED
Then check the increase VmLck field in /proc/pid/status(to 128k).
When vma is set with different vm_flags, and the new vm_flags is with
VM_LOCKED, it is not necessarily be a "new locked" vma. This patch
corrects this bug by prevent mm->locked_vm from increment when old
vm_flags is already VM_LOCKED.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Simon Guo <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Alexey Klimov <[email protected]>
Cc: Eric B Munson <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Simon Guo <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Rafael David Tinoco <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/mlock.c | 3 +++
1 file changed, 3 insertions(+)
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -504,6 +504,7 @@ static int mlock_fixup(struct vm_area_st
int nr_pages;
int ret = 0;
int lock = !!(newflags & VM_LOCKED);
+ vm_flags_t old_flags = vma->vm_flags;
if (newflags == vma->vm_flags || (vma->vm_flags & VM_SPECIAL) ||
is_vm_hugetlb_page(vma) || vma == get_gate_vma(current->mm))
@@ -538,6 +539,8 @@ success:
nr_pages = (end - start) >> PAGE_SHIFT;
if (!lock)
nr_pages = -nr_pages;
+ else if (old_flags & VM_LOCKED)
+ nr_pages = 0;
mm->locked_vm += nr_pages;
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Halil Pasic <[email protected]>
commit 78b1a52e05c9db11d293342e8d6d8a230a04b4e7 upstream.
While ccw_io_helper() seems like intended to be exclusive in a sense that
it is supposed to facilitate I/O for at most one thread at any given
time, there is actually nothing ensuring that threads won't pile up at
vcdev->wait_q. If they do, all threads get woken up and see the status
that belongs to some other request than their own. This can lead to bugs.
For an example see:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432
This race normally does not cause any problems. The operations provided
by struct virtio_config_ops are usually invoked in a well defined
sequence, normally don't fail, and are normally used quite infrequent
too.
Yet, if some of the these operations are directly triggered via sysfs
attributes, like in the case described by the referenced bug, userspace
is given an opportunity to force races by increasing the frequency of the
given operations.
Let us fix the problem by ensuring, that for each device, we finish
processing the previous request before starting with a new one.
Signed-off-by: Halil Pasic <[email protected]>
Reported-by: Colin Ian King <[email protected]>
Cc: [email protected]
Message-Id: <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/virtio/virtio_ccw.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -59,6 +59,7 @@ struct virtio_ccw_device {
unsigned int revision; /* Transport revision */
wait_queue_head_t wait_q;
spinlock_t lock;
+ struct mutex io_lock; /* Serializes I/O requests */
struct list_head virtqueues;
unsigned long indicators;
unsigned long indicators2;
@@ -307,6 +308,7 @@ static int ccw_io_helper(struct virtio_c
unsigned long flags;
int flag = intparm & VIRTIO_CCW_INTPARM_MASK;
+ mutex_lock(&vcdev->io_lock);
do {
spin_lock_irqsave(get_ccwdev_lock(vcdev->cdev), flags);
ret = ccw_device_start(vcdev->cdev, ccw, intparm, 0, 0);
@@ -319,7 +321,9 @@ static int ccw_io_helper(struct virtio_c
cpu_relax();
} while (ret == -EBUSY);
wait_event(vcdev->wait_q, doing_io(vcdev, flag) == 0);
- return ret ? ret : vcdev->err;
+ ret = ret ? ret : vcdev->err;
+ mutex_unlock(&vcdev->io_lock);
+ return ret;
}
static void virtio_ccw_drop_indicator(struct virtio_ccw_device *vcdev,
@@ -1236,6 +1240,7 @@ static int virtio_ccw_online(struct ccw_
init_waitqueue_head(&vcdev->wait_q);
INIT_LIST_HEAD(&vcdev->virtqueues);
spin_lock_init(&vcdev->lock);
+ mutex_init(&vcdev->io_lock);
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
dev_set_drvdata(&cdev->dev, vcdev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kevin Hilman <[email protected]>
commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream.
Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.
This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.
Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.
Cc: <[email protected]> # 4.4.x
Signed-off-by: Kevin Hilman <[email protected]>
Signed-off-by: Alexey Brodkin <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/Kconfig | 2 +-
arch/arc/Makefile | 2 +-
arch/arc/configs/axs101_defconfig | 1 +
arch/arc/configs/nsim_700_defconfig | 1 +
arch/arc/configs/nsimosci_defconfig | 1 +
arch/arc/configs/tb10x_defconfig | 1 +
6 files changed, 6 insertions(+), 2 deletions(-)
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -96,7 +96,7 @@ endmenu
choice
prompt "ARC Instruction Set"
- default ISA_ARCOMPACT
+ default ISA_ARCV2
config ISA_ARCOMPACT
bool "ARCompact ISA"
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -12,7 +12,7 @@ ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := arc-linux-
endif
-KBUILD_DEFCONFIG := nsim_700_defconfig
+KBUILD_DEFCONFIG := nsim_hs_defconfig
cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -17,6 +17,7 @@ CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
CONFIG_MODULES=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARC_PLAT_AXS10X=y
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -16,6 +16,7 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -17,6 +17,7 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -19,6 +19,7 @@ CONFIG_KALLSYMS_ALL=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
[for older kernels only, lustre has been removed from upstream]
When someone writes:
strncpy(dest, source, sizeof(source));
they really are just doing the same thing as:
strcpy(dest, source);
but somehow they feel better because they are now using the "safe"
version of the string functions. Cargo-cult programming at its
finest...
gcc-8 rightfully warns you about doing foolish things like this. Now
that the stable kernels are all starting to be built using gcc-8, let's
get rid of this warning so that we do not have to gaze at this horror.
To dropt the warning, just convert the code to using strcpy() so that if
someone really wants to audit this code and find all of the obvious
problems, it will be easier to do so.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/lustre/lustre/lmv/lmv_obd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/lustre/lustre/lmv/lmv_obd.c
+++ b/drivers/staging/lustre/lustre/lmv/lmv_obd.c
@@ -700,7 +700,7 @@ repeat_fid2path:
memmove(ptr + strlen(gf->gf_path) + 1, ptr,
strlen(ori_gf->gf_path));
- strncpy(ptr, gf->gf_path, strlen(gf->gf_path));
+ strcpy(ptr, gf->gf_path);
ptr += strlen(gf->gf_path);
*ptr = '/';
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 7661ca09b2ff98f48693f431bb01fed62830e433 upstream.
gcc-8 points out two comparisons that are clearly bogus
and almost certainly not what the author intended to write:
drivers/usb/gadget/udc/dummy_hcd.c: In function 'set_link_state_by_speed':
drivers/usb/gadget/udc/dummy_hcd.c:379:31: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
USB_PORT_STAT_ENABLE) == 1 &&
^~
drivers/usb/gadget/udc/dummy_hcd.c:381:25: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
USB_SS_PORT_LS_U0) == 1 &&
^~
I looked at the code for a bit and came up with a change that makes
it look like what the author probably meant here. This makes it
look reasonable to me and to gcc, shutting up the warning.
It does of course change behavior as the two conditions are actually
evaluated rather than being hardcoded to false, and I have made no
attempt at verifying that the changed logic makes sense in the context
of a USB HCD, so that part needs to be reviewed carefully.
Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support")
Cc: Tatyana Brokhman <[email protected]>
Cc: Felipe Balbi <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/dummy_hcd.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -379,11 +379,10 @@ static void set_link_state_by_speed(stru
USB_PORT_STAT_CONNECTION) == 0)
dum_hcd->port_status |=
(USB_PORT_STAT_C_CONNECTION << 16);
- if ((dum_hcd->port_status &
- USB_PORT_STAT_ENABLE) == 1 &&
- (dum_hcd->port_status &
- USB_SS_PORT_LS_U0) == 1 &&
- dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+ if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) &&
+ (dum_hcd->port_status &
+ USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 &&
+ dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
dum_hcd->active = 1;
}
} else {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ]
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/amd/sunlance.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index 7847638bdd22..8914170fccff 100644
--- a/drivers/net/ethernet/amd/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -1419,7 +1419,7 @@ static int sparc_lance_probe_one(struct platform_device *op,
prop = of_get_property(nd, "tpe-link-test?", NULL);
if (!prop)
- goto no_link_test;
+ goto node_put;
if (strcmp(prop, "true")) {
printk(KERN_NOTICE "SunLance: warning: overriding option "
@@ -1428,6 +1428,8 @@ static int sparc_lance_probe_one(struct platform_device *op,
"to [email protected]\n");
auxio_set_lte(AUXIO_LTE_ON);
}
+node_put:
+ of_node_put(nd);
no_link_test:
lp->auto_select = 1;
lp->tpe = 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]
Initialize the uid variable to zero to avoid the compilation warning.
Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/alloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c
index 0c51c69f802f..a4912b11e54f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/alloc.c
+++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c
@@ -339,7 +339,7 @@ void mlx4_zone_allocator_destroy(struct mlx4_zone_allocator *zone_alloc)
static u32 __mlx4_alloc_from_zone(struct mlx4_zone_entry *zone, int count,
int align, u32 skip_mask, u32 *puid)
{
- u32 uid;
+ u32 uid = 0;
u32 res;
struct mlx4_zone_allocator *zone_alloc = zone->allocator;
struct mlx4_zone_entry *curr_node;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit 9084cb6a24bf5838a665af92ded1af8363f9e563 upstream.
We were iterating a block group's free space cache rbtree without locking
first the lock that protects it (the free_space_ctl->free_space_offset
rbtree is protected by the free_space_ctl->tree_lock spinlock).
KASAN reported an use-after-free problem when iterating such a rbtree due
to a concurrent rbtree delete:
[ 9520.359168] ==================================================================
[ 9520.359656] BUG: KASAN: use-after-free in rb_next+0x13/0x90
[ 9520.359949] Read of size 8 at addr ffff8800b7ada500 by task btrfs-transacti/1721
[ 9520.360357]
[ 9520.360530] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G L 4.19.0-rc8-nbor #555
[ 9520.360990] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.362682] Call Trace:
[ 9520.362887] dump_stack+0xa4/0xf5
[ 9520.363146] print_address_description+0x78/0x280
[ 9520.363412] kasan_report+0x263/0x390
[ 9520.363650] ? rb_next+0x13/0x90
[ 9520.363873] __asan_load8+0x54/0x90
[ 9520.364102] rb_next+0x13/0x90
[ 9520.364380] btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.364697] dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.364997] btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.365310] __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.365646] ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.365923] ? _raw_spin_unlock+0x27/0x40
[ 9520.366204] ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.366549] btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.366880] cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.367220] ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.367518] ? lock_downgrade+0x2f0/0x2f0
[ 9520.367799] ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.368104] ? kasan_check_read+0x11/0x20
[ 9520.368349] ? do_raw_spin_unlock+0xa8/0x140
[ 9520.368638] btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.368978] ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.369282] ? do_raw_spin_unlock+0xa8/0x140
[ 9520.369534] ? _raw_spin_unlock+0x27/0x40
[ 9520.369811] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.370137] commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.370560] ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.370926] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.371285] btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.371612] ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.371943] ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.372257] transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.372537] kthread+0x1d2/0x1f0
[ 9520.372793] ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.373090] ? kthread_park+0xb0/0xb0
[ 9520.373329] ret_from_fork+0x3a/0x50
[ 9520.373567]
[ 9520.373738] Allocated by task 1804:
[ 9520.373974] kasan_kmalloc+0xff/0x180
[ 9520.374208] kasan_slab_alloc+0x11/0x20
[ 9520.374447] kmem_cache_alloc+0xfc/0x2d0
[ 9520.374731] __btrfs_add_free_space+0x40/0x580 [btrfs]
[ 9520.375044] unpin_extent_range+0x4f7/0x7a0 [btrfs]
[ 9520.375383] btrfs_finish_extent_commit+0x15f/0x4d0 [btrfs]
[ 9520.375707] btrfs_commit_transaction+0xb06/0x10e0 [btrfs]
[ 9520.376027] btrfs_alloc_data_chunk_ondemand+0x237/0x5c0 [btrfs]
[ 9520.376365] btrfs_check_data_free_space+0x81/0xd0 [btrfs]
[ 9520.376689] btrfs_delalloc_reserve_space+0x25/0x80 [btrfs]
[ 9520.377018] btrfs_direct_IO+0x42e/0x6d0 [btrfs]
[ 9520.377284] generic_file_direct_write+0x11e/0x220
[ 9520.377587] btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.377875] aio_write+0x25c/0x360
[ 9520.378106] io_submit_one+0xaa0/0xdc0
[ 9520.378343] __se_sys_io_submit+0xfa/0x2f0
[ 9520.378589] __x64_sys_io_submit+0x43/0x50
[ 9520.378840] do_syscall_64+0x7d/0x240
[ 9520.379081] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.379387]
[ 9520.379557] Freed by task 1802:
[ 9520.379782] __kasan_slab_free+0x173/0x260
[ 9520.380028] kasan_slab_free+0xe/0x10
[ 9520.380262] kmem_cache_free+0xc1/0x2c0
[ 9520.380544] btrfs_find_space_for_alloc+0x4cd/0x4e0 [btrfs]
[ 9520.380866] find_free_extent+0xa99/0x17e0 [btrfs]
[ 9520.381166] btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
[ 9520.381474] btrfs_get_blocks_direct+0x60b/0xbd0 [btrfs]
[ 9520.381761] __blockdev_direct_IO+0x10ee/0x58a1
[ 9520.382059] btrfs_direct_IO+0x25a/0x6d0 [btrfs]
[ 9520.382321] generic_file_direct_write+0x11e/0x220
[ 9520.382623] btrfs_file_write_iter+0x472/0xac0 [btrfs]
[ 9520.382904] aio_write+0x25c/0x360
[ 9520.383172] io_submit_one+0xaa0/0xdc0
[ 9520.383416] __se_sys_io_submit+0xfa/0x2f0
[ 9520.383678] __x64_sys_io_submit+0x43/0x50
[ 9520.383927] do_syscall_64+0x7d/0x240
[ 9520.384165] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 9520.384439]
[ 9520.384610] The buggy address belongs to the object at ffff8800b7ada500
which belongs to the cache btrfs_free_space of size 72
[ 9520.385175] The buggy address is located 0 bytes inside of
72-byte region [ffff8800b7ada500, ffff8800b7ada548)
[ 9520.385691] The buggy address belongs to the page:
[ 9520.385957] page:ffffea0002deb680 count:1 mapcount:0 mapping:ffff880108a1d700 index:0x0 compound_mapcount: 0
[ 9520.388030] flags: 0x8100(slab|head)
[ 9520.388281] raw: 0000000000008100 ffffea0002deb608 ffffea0002728808 ffff880108a1d700
[ 9520.388722] raw: 0000000000000000 0000000000130013 00000001ffffffff 0000000000000000
[ 9520.389169] page dumped because: kasan: bad access detected
[ 9520.389473]
[ 9520.389658] Memory state around the buggy address:
[ 9520.389943] ffff8800b7ada400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390368] ffff8800b7ada480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.390796] >ffff8800b7ada500: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc
[ 9520.391223] ^
[ 9520.391461] ffff8800b7ada580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.391885] ffff8800b7ada600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 9520.392313] ==================================================================
[ 9520.392772] BTRFS critical (device vdc): entry offset 2258497536, bytes 131072, bitmap no
[ 9520.393247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011
[ 9520.393705] PGD 800000010dbab067 P4D 800000010dbab067 PUD 107551067 PMD 0
[ 9520.394059] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 9520.394378] CPU: 4 PID: 1721 Comm: btrfs-transacti Tainted: G B L 4.19.0-rc8-nbor #555
[ 9520.394858] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 9520.395350] RIP: 0010:rb_next+0x3c/0x90
[ 9520.396461] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.396762] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.397115] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.397468] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.397821] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.398188] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.398555] FS: 0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.399007] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.399335] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.399679] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.400023] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.400400] Call Trace:
[ 9520.400648] btrfs_dump_free_space+0x146/0x160 [btrfs]
[ 9520.400974] dump_space_info+0x2cd/0x310 [btrfs]
[ 9520.401287] btrfs_reserve_extent+0x1ee/0x1f0 [btrfs]
[ 9520.401609] __btrfs_prealloc_file_range+0x1cc/0x620 [btrfs]
[ 9520.401952] ? btrfs_update_time+0x180/0x180 [btrfs]
[ 9520.402232] ? _raw_spin_unlock+0x27/0x40
[ 9520.402522] ? btrfs_alloc_data_chunk_ondemand+0x2c0/0x5c0 [btrfs]
[ 9520.402882] btrfs_prealloc_file_range_trans+0x23/0x30 [btrfs]
[ 9520.403261] cache_save_setup+0x42e/0x580 [btrfs]
[ 9520.403570] ? btrfs_check_data_free_space+0xd0/0xd0 [btrfs]
[ 9520.403871] ? lock_downgrade+0x2f0/0x2f0
[ 9520.404161] ? btrfs_write_dirty_block_groups+0x11f/0x6e0 [btrfs]
[ 9520.404481] ? kasan_check_read+0x11/0x20
[ 9520.404732] ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405026] btrfs_write_dirty_block_groups+0x2af/0x6e0 [btrfs]
[ 9520.405375] ? btrfs_start_dirty_block_groups+0x870/0x870 [btrfs]
[ 9520.405694] ? do_raw_spin_unlock+0xa8/0x140
[ 9520.405958] ? _raw_spin_unlock+0x27/0x40
[ 9520.406243] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.406574] commit_cowonly_roots+0x4b9/0x610 [btrfs]
[ 9520.406899] ? commit_fs_roots+0x350/0x350 [btrfs]
[ 9520.407253] ? btrfs_run_delayed_refs+0x1b8/0x230 [btrfs]
[ 9520.407589] btrfs_commit_transaction+0x5e5/0x10e0 [btrfs]
[ 9520.407925] ? btrfs_apply_pending_changes+0x90/0x90 [btrfs]
[ 9520.408262] ? start_transaction+0x168/0x6c0 [btrfs]
[ 9520.408582] transaction_kthread+0x21c/0x240 [btrfs]
[ 9520.408870] kthread+0x1d2/0x1f0
[ 9520.409138] ? btrfs_cleanup_transaction+0xb50/0xb50 [btrfs]
[ 9520.409440] ? kthread_park+0xb0/0xb0
[ 9520.409682] ret_from_fork+0x3a/0x50
[ 9520.410508] Dumping ftrace buffer:
[ 9520.410764] (ftrace buffer empty)
[ 9520.411007] CR2: 0000000000000011
[ 9520.411297] ---[ end trace 01a0863445cf360a ]---
[ 9520.411568] RIP: 0010:rb_next+0x3c/0x90
[ 9520.412644] RSP: 0018:ffff8801074ff780 EFLAGS: 00010292
[ 9520.412932] RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff81b5ac4c
[ 9520.413274] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000011
[ 9520.413616] RBP: ffff8801074ff7a0 R08: ffffed0021d64ccc R09: ffffed0021d64ccc
[ 9520.414007] R10: 0000000000000001 R11: ffffed0021d64ccb R12: ffff8800b91e0000
[ 9520.414349] R13: ffff8800a3ceba48 R14: ffff8800b627bf80 R15: 0000000000020000
[ 9520.416074] FS: 0000000000000000(0000) GS:ffff88010eb00000(0000) knlGS:0000000000000000
[ 9520.416536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9520.416848] CR2: 0000000000000011 CR3: 0000000106b52000 CR4: 00000000000006a0
[ 9520.418477] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 9520.418846] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 9520.419204] Kernel panic - not syncing: Fatal exception
[ 9520.419666] Dumping ftrace buffer:
[ 9520.419930] (ftrace buffer empty)
[ 9520.420168] Kernel Offset: disabled
[ 9520.420406] ---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this by acquiring the respective lock before iterating the rbtree.
Reported-by: Nikolay Borisov <[email protected]>
CC: [email protected] # 4.4+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Cc: Nikolay Borisov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/free-space-cache.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -2469,6 +2469,7 @@ void btrfs_dump_free_space(struct btrfs_
struct rb_node *n;
int count = 0;
+ spin_lock(&ctl->tree_lock);
for (n = rb_first(&ctl->free_space_offset); n; n = rb_next(n)) {
info = rb_entry(n, struct btrfs_free_space, offset_index);
if (info->bytes >= bytes && !block_group->ro)
@@ -2478,6 +2479,7 @@ void btrfs_dump_free_space(struct btrfs_
info->offset, info->bytes,
(info->bitmap) ? "yes" : "no");
}
+ spin_unlock(&ctl->tree_lock);
btrfs_info(block_group->fs_info, "block group has cluster?: %s",
list_empty(&block_group->cluster_list) ? "no" : "yes");
btrfs_info(block_group->fs_info,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9aaa4e8ba12972d674caeefbc5f88d83235dd697 ]
Release PTT before entering error flow.
Signed-off-by: Denis Bolotin <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 35e1468d8196..b8ae6ed5c7ba 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1124,9 +1124,9 @@ static int qed_drain(struct qed_dev *cdev)
return -EBUSY;
}
rc = qed_mcp_drain(hwfn, ptt);
+ qed_ptt_release(hwfn, ptt);
if (rc)
return rc;
- qed_ptt_release(hwfn, ptt);
}
return 0;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit 0472bf06c6fd33c1a18aaead4c8f91e5a03d8d7b upstream.
Don't allow USB3 U1 or U2 if the latency to wake up from the U-state
reaches the service interval for a periodic endpoint.
This is according to xhci 1.1 specification section 4.23.5.2 extra note:
"Software shall ensure that a device is prevented from entering a U-state
where its worst case exit latency approaches the ESIT."
Allowing too long exit latencies for periodic endpoint confuses xHC
internal scheduling, and new devices may fail to enumerate with a
"Not enough bandwidth for new device state" error from the host.
Cc: <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4417,6 +4417,14 @@ static u16 xhci_calculate_u1_timeout(str
{
unsigned long long timeout_ns;
+ /* Prevent U1 if service interval is shorter than U1 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+ dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
if (xhci->quirks & XHCI_INTEL_HOST)
timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
else
@@ -4473,6 +4481,14 @@ static u16 xhci_calculate_u2_timeout(str
{
unsigned long long timeout_ns;
+ /* Prevent U2 if service interval is shorter than U2 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+ dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
if (xhci->quirks & XHCI_INTEL_HOST)
timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
else
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]
The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.
But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.
The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.
Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <[email protected]>
Co-authored-by: Linus Lüssing <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/batman-adv/fragmentation.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c
index 5d2f9d4879b2..d50c3b003dc9 100644
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -266,7 +266,7 @@ batadv_frag_merge_packets(struct hlist_head *chain)
kfree(entry);
packet = (struct batadv_frag_packet *)skb_out->data;
- size = ntohs(packet->total_size);
+ size = ntohs(packet->total_size) + hdr_size;
/* Make room for the rest of the fragments. */
if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 9a20332ab373b1f8f947e0a9c923652b32dab031 upstream.
Some spurious calls of snd_free_pages() have been overlooked and
remain in the error paths of sparc cs4231 driver code. Since
runtime->dma_area is managed by the PCM core helper, we shouldn't
release manually.
Drop the superfluous calls.
Reviewed-by: Takashi Sakamoto <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/sparc/cs4231.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/sound/sparc/cs4231.c
+++ b/sound/sparc/cs4231.c
@@ -1146,10 +1146,8 @@ static int snd_cs4231_playback_open(stru
runtime->hw = snd_cs4231_playback;
err = snd_cs4231_open(chip, CS4231_MODE_PLAY);
- if (err < 0) {
- snd_free_pages(runtime->dma_area, runtime->dma_bytes);
+ if (err < 0)
return err;
- }
chip->playback_substream = substream;
chip->p_periods_sent = 0;
snd_pcm_set_sync(substream);
@@ -1167,10 +1165,8 @@ static int snd_cs4231_capture_open(struc
runtime->hw = snd_cs4231_capture;
err = snd_cs4231_open(chip, CS4231_MODE_RECORD);
- if (err < 0) {
- snd_free_pages(runtime->dma_area, runtime->dma_bytes);
+ if (err < 0)
return err;
- }
chip->capture_substream = substream;
chip->c_periods_sent = 0;
snd_pcm_set_sync(substream);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Peng <[email protected]>
commit 5f8cf712582617d523120df67d392059eaf2fc4b upstream.
If a USB sound card reports 0 interfaces, an error condition is triggered
and the function usb_audio_probe errors out. In the error path, there was a
use-after-free vulnerability where the memory object of the card was first
freed, followed by a decrement of the number of active chips. Moving the
decrement above the atomic_dec fixes the UAF.
[ The original problem was introduced in 3.1 kernel, while it was
developed in a different form. The Fixes tag below indicates the
original commit but it doesn't mean that the patch is applicable
cleanly. -- tiwai ]
Fixes: 362e4e49abe5 ("ALSA: usb-audio - clear chip->probing on error exit")
Reported-by: Hui Peng <[email protected]>
Reported-by: Mathias Payer <[email protected]>
Signed-off-by: Hui Peng <[email protected]>
Signed-off-by: Mathias Payer <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/card.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -589,9 +589,12 @@ static int usb_audio_probe(struct usb_in
__error:
if (chip) {
+ /* chip->active is inside the chip->card object,
+ * decrement before memory is possibly returned.
+ */
+ atomic_dec(&chip->active);
if (!chip->num_interfaces)
snd_card_free(chip->card);
- atomic_dec(&chip->active);
}
mutex_unlock(®ister_mutex);
return err;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiongfeng Wang <[email protected]>
commit 321cb0308a9e76841394b4bbab6a1107cfedbae0 upstream.
gcc-8 reports many -Wpacked-not-aligned warnings. The below are some
examples.
./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
} __attribute__ ((packed));
./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
} __attribute__ ((packed));
./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
} __attribute__ ((packed));
This patch suppresses this kind of warnings for default setting.
Signed-off-by: Xiongfeng Wang <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/Makefile.extrawarn | 3 +++
1 file changed, 3 insertions(+)
--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -10,6 +10,8 @@
# are not supported by all versions of the compiler
# ==========================================================================
+KBUILD_CFLAGS += $(call cc-disable-warning, packed-not-aligned)
+
ifeq ("$(origin W)", "command line")
export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
endif
@@ -25,6 +27,7 @@ warning-1 += -Wold-style-definition
warning-1 += $(call cc-option, -Wmissing-include-dirs)
warning-1 += $(call cc-option, -Wunused-but-set-variable)
warning-1 += $(call cc-option, -Wunused-const-variable)
+warning-1 += $(call cc-option, -Wpacked-not-aligned)
warning-1 += $(call cc-disable-warning, missing-field-initializers)
warning-2 := -Waggregate-return
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Payer <[email protected]>
commit 704620afc70cf47abb9d6a1a57f3825d2bca49cf upstream.
When reading an extra descriptor, we need to properly check the minimum
and maximum size allowed, to prevent from invalid data being sent by a
device.
Reported-by: Hui Peng <[email protected]>
Reported-by: Mathias Payer <[email protected]>
Co-developed-by: Linus Torvalds <[email protected]>
Signed-off-by: Hui Peng <[email protected]>
Signed-off-by: Mathias Payer <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 2 +-
drivers/usb/core/usb.c | 6 +++---
drivers/usb/host/hwa-hc.c | 2 +-
include/linux/usb.h | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2211,7 +2211,7 @@ static int usb_enumerate_device_otg(stru
/* descriptor may appear anywhere in config */
err = __usb_get_extra_descriptor(udev->rawdescriptors[0],
le16_to_cpu(udev->config[0].desc.wTotalLength),
- USB_DT_OTG, (void **) &desc);
+ USB_DT_OTG, (void **) &desc, sizeof(*desc));
if (err || !(desc->bmAttributes & USB_OTG_HNP))
return 0;
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -678,14 +678,14 @@ EXPORT_SYMBOL_GPL(usb_get_current_frame_
*/
int __usb_get_extra_descriptor(char *buffer, unsigned size,
- unsigned char type, void **ptr)
+ unsigned char type, void **ptr, size_t minsize)
{
struct usb_descriptor_header *header;
while (size >= sizeof(struct usb_descriptor_header)) {
header = (struct usb_descriptor_header *)buffer;
- if (header->bLength < 2) {
+ if (header->bLength < 2 || header->bLength > size) {
printk(KERN_ERR
"%s: bogus descriptor, type %d length %d\n",
usbcore_name,
@@ -694,7 +694,7 @@ int __usb_get_extra_descriptor(char *buf
return -1;
}
- if (header->bDescriptorType == type) {
+ if (header->bDescriptorType == type && header->bLength >= minsize) {
*ptr = header;
return 0;
}
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -654,7 +654,7 @@ static int hwahc_security_create(struct
top = itr + itr_size;
result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index],
le16_to_cpu(usb_dev->actconfig->desc.wTotalLength),
- USB_DT_SECURITY, (void **) &secd);
+ USB_DT_SECURITY, (void **) &secd, sizeof(*secd));
if (result == -1) {
dev_warn(dev, "BUG? WUSB host has no security descriptors\n");
return 0;
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -334,11 +334,11 @@ struct usb_host_bos {
};
int __usb_get_extra_descriptor(char *buffer, unsigned size,
- unsigned char type, void **ptr);
+ unsigned char type, void **ptr, size_t min);
#define usb_get_extra_descriptor(ifpoint, type, ptr) \
__usb_get_extra_descriptor((ifpoint)->extra, \
(ifpoint)->extralen, \
- type, (void **)ptr)
+ type, (void **)ptr, sizeof(**(ptr)))
/* ----------------------------------------------------------------------- */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Milo Kim <[email protected]>
commit d1aa577f5e191d77d3ad62da93729b5af9532bb4 upstream.
Workqueue, 'set_brightness_work' is used for scheduling brightness control.
This workqueue is canceled when the LED class device is unregistered.
Currently, LED subsystem handles like below.
cancel_work_sync(&led_cdev->set_brightness_work)
led_set_brightness(led_cdev, LED_OFF)
However, this could be a problem.
Workqueue is going to be canceled but LED device needs to be off.
The worst case is null pointer access due to scheduling a workqueue.
LED module is loaded.
LED driver private data is allocated by using devm_zalloc().
LED module is unloaded.
led_classdev_unregister() is called.
cancel_work_sync()
led_set_brightness(led_cdev, LED_OFF)
schedule_work() if LED driver uses brightness_set_blocking()
In the meantime, driver private data will be freed.
..scheduling..
brightness_set_blocking() callback is invoked.
For the brightness control, LED driver tries to access private
data but resource is removed!
To avoid this problem, LED subsystem should turn off the brightness first
and wait for completion.
led_set_brightness(led_cdev, LED_OFF)
flush_work(&led_cdev->set_brightness_work)
It guarantees that LED driver turns off the brightness prior to
resource management.
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Milo Kim <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/leds/led-class.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -247,12 +247,13 @@ void led_classdev_unregister(struct led_
up_write(&led_cdev->trigger_lock);
#endif
- cancel_work_sync(&led_cdev->set_brightness_work);
-
/* Stop blinking */
led_stop_software_blink(led_cdev);
+
led_set_brightness(led_cdev, LED_OFF);
+ flush_work(&led_cdev->set_brightness_work);
+
device_unregister(led_cdev->dev);
down_write(&leds_list_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Markus Hofstaetter <[email protected]>
commit f16703360da7731a057df2ffa902306819c22398 upstream.
Some PWMs are disabled by default or the default pin setting
does not match the LED_OFF state (e.g., active-low leds).
Hence, the driver may end up reporting 0 brightness, but
the leds are actually on using full brightness, because
it never enforces its default configuration.
So enforce it by calling led_pwm_set() after successfully
registering the device.
Tested on a Phytec phyFLEX i.MX6Q board based on kernel
v3.19.5.
Signed-off-by: Markus Hofstaetter <[email protected]>
Tested-by: Markus Hofstaetter <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/leds/leds-pwm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -132,6 +132,7 @@ static int led_pwm_add(struct device *de
ret = led_classdev_register(dev, &led_data->cdev);
if (ret == 0) {
priv->num_leds++;
+ led_pwm_set(&led_data->cdev, led_data->cdev.brightness);
} else {
dev_err(dev, "failed to register PWM led for %s: %d\n",
led->name, ret);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Borisov <[email protected]>
commit f8397d69daef06d358430d3054662fb597e37c00 upstream.
When a metadata read is served the endio routine btree_readpage_end_io_hook
is called which eventually runs the tree-checker. If tree-checker fails
to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This
leads to btree_read_extent_buffer_pages wrongly assuming that all
available copies of this extent buffer are wrong and failing prematurely.
Fix this modify btree_read_extent_buffer_pages to read all copies of
the data.
This failure was exhibitted in xfstests btrfs/124 which would
spuriously fail its balance operations. The reason was that when balance
was run following re-introduction of the missing raid1 disk
__btrfs_map_block would map the read request to stripe 0, which
corresponded to devid 2 (the disk which is being removed in the test):
item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1
io_align 65536 io_width 65536 sector_size 4096
num_stripes 2 sub_stripes 1
stripe 0 devid 2 offset 2156920832
dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8
stripe 1 devid 1 offset 3553624064
dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca
This caused read requests for a checksum item that to be routed to the
stale disk which triggered the aforementioned logic involving
EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of
the balance operation.
Fixes: a826d6dcb32d ("Btrfs: check items for correctness as we search")
CC: [email protected] # 4.4+
Suggested-by: Qu Wenruo <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -445,9 +445,9 @@ static int btree_read_extent_buffer_page
int mirror_num = 0;
int failed_mirror = 0;
- clear_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags);
io_tree = &BTRFS_I(root->fs_info->btree_inode)->io_tree;
while (1) {
+ clear_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags);
ret = read_extent_buffer_pages(io_tree, eb, start,
WAIT_COMPLETE,
btree_get_extent, mirror_num);
@@ -459,14 +459,6 @@ static int btree_read_extent_buffer_page
ret = -EIO;
}
- /*
- * This buffer's crc is fine, but its contents are corrupted, so
- * there is no reason to read the other copies, they won't be
- * any less wrong.
- */
- if (test_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags))
- break;
-
num_copies = btrfs_num_copies(root->fs_info,
eb->start, eb->len);
if (num_copies == 1)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit 42c335f7e67029d2e01711f2f2bc6252277c8993 upstream.
When copying attributes, the len argument was padded out and the
resulting memcpy() would copy beyond the end of the source buffer.
Avoid this, and use size_t for val_len to avoid all the casts.
Similarly, avoid source buffer casts and use void *.
Additionally enforces val_len can be represented by u16 and that the DMA
buffer was not overflowed. Fixes the size of mfa, which is not
FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN (but it will be padded up to 4). This
was noticed by the future CONFIG_FORTIFY_SOURCE checks.
Cc: Daniel Micay <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Varun Prakash <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/csiostor/csio_lnode.c | 43 ++++++++++++++++++++++---------------
1 file changed, 26 insertions(+), 17 deletions(-)
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -238,14 +238,23 @@ csio_osname(uint8_t *buf, size_t buf_len
}
static inline void
-csio_append_attrib(uint8_t **ptr, uint16_t type, uint8_t *val, uint16_t len)
+csio_append_attrib(uint8_t **ptr, uint16_t type, void *val, size_t val_len)
{
+ uint16_t len;
struct fc_fdmi_attr_entry *ae = (struct fc_fdmi_attr_entry *)*ptr;
+
+ if (WARN_ON(val_len > U16_MAX))
+ return;
+
+ len = val_len;
+
ae->type = htons(type);
len += 4; /* includes attribute type and length */
len = (len + 3) & ~3; /* should be multiple of 4 bytes */
ae->len = htons(len);
- memcpy(ae->value, val, len);
+ memcpy(ae->value, val, val_len);
+ if (len > val_len)
+ memset(ae->value + val_len, 0, len - val_len);
*ptr += len;
}
@@ -335,7 +344,7 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *h
numattrs++;
val = htonl(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_SUPPORTEDSPEED,
- (uint8_t *)&val,
+ &val,
FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN);
numattrs++;
@@ -346,23 +355,22 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *h
else
val = htonl(CSIO_HBA_PORTSPEED_UNKNOWN);
csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_CURRENTPORTSPEED,
- (uint8_t *)&val,
- FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN);
+ &val, FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN);
numattrs++;
mfs = ln->ln_sparm.csp.sp_bb_data;
csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_MAXFRAMESIZE,
- (uint8_t *)&mfs, FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN);
+ &mfs, sizeof(mfs));
numattrs++;
strcpy(buf, "csiostor");
csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_OSDEVICENAME, buf,
- (uint16_t)strlen(buf));
+ strlen(buf));
numattrs++;
if (!csio_hostname(buf, sizeof(buf))) {
csio_append_attrib(&pld, FC_FDMI_PORT_ATTR_HOSTNAME,
- buf, (uint16_t)strlen(buf));
+ buf, strlen(buf));
numattrs++;
}
attrib_blk->numattrs = htonl(numattrs);
@@ -444,33 +452,32 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *h
strcpy(buf, "Chelsio Communications");
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MANUFACTURER, buf,
- (uint16_t)strlen(buf));
+ strlen(buf));
numattrs++;
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_SERIALNUMBER,
- hw->vpd.sn, (uint16_t)sizeof(hw->vpd.sn));
+ hw->vpd.sn, sizeof(hw->vpd.sn));
numattrs++;
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MODEL, hw->vpd.id,
- (uint16_t)sizeof(hw->vpd.id));
+ sizeof(hw->vpd.id));
numattrs++;
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MODELDESCRIPTION,
- hw->model_desc, (uint16_t)strlen(hw->model_desc));
+ hw->model_desc, strlen(hw->model_desc));
numattrs++;
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_HARDWAREVERSION,
- hw->hw_ver, (uint16_t)sizeof(hw->hw_ver));
+ hw->hw_ver, sizeof(hw->hw_ver));
numattrs++;
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_FIRMWAREVERSION,
- hw->fwrev_str, (uint16_t)strlen(hw->fwrev_str));
+ hw->fwrev_str, strlen(hw->fwrev_str));
numattrs++;
if (!csio_osname(buf, sizeof(buf))) {
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_OSNAMEVERSION,
- buf, (uint16_t)strlen(buf));
+ buf, strlen(buf));
numattrs++;
}
csio_append_attrib(&pld, FC_FDMI_HBA_ATTR_MAXCTPAYLOAD,
- (uint8_t *)&maxpayload,
- FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN);
+ &maxpayload, FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN);
len = (uint32_t)(pld - (uint8_t *)cmd);
numattrs++;
attrib_blk->numattrs = htonl(numattrs);
@@ -1794,6 +1801,8 @@ csio_ln_mgmt_submit_req(struct csio_iore
struct csio_mgmtm *mgmtm = csio_hw_to_mgmtm(hw);
int rv;
+ BUG_ON(pld_len > pld->len);
+
io_req->io_cbfn = io_cbfn; /* Upper layer callback handler */
io_req->fw_handle = (uintptr_t) (io_req);
io_req->eq_idx = mgmtm->eq_idx;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sam Bobroff <[email protected]>
commit dc25ab067645eabd037f1a23d49a666f9e0b8c68 upstream.
If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.
This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.
Fixes: 0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported")
Signed-off-by: Sam Bobroff <[email protected]>
Cc: <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/ast/ast_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -557,7 +557,8 @@ int ast_driver_unload(struct drm_device
drm_mode_config_cleanup(dev);
ast_mm_fini(ast);
- pci_iounmap(dev->pdev, ast->ioregs);
+ if (ast->ioregs != ast->regs + AST_IO_MM_OFFSET)
+ pci_iounmap(dev->pdev, ast->ioregs);
pci_iounmap(dev->pdev, ast->regs);
kfree(ast);
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry V. Levin <[email protected]>
commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream.
When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.
This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.
Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v3.13+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/syscall.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -51,7 +51,7 @@ static inline unsigned long mips_get_sys
#ifdef CONFIG_64BIT
case 4: case 5: case 6: case 7:
#ifdef CONFIG_MIPS32_O32
- if (test_thread_flag(TIF_32BIT_REGS))
+ if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
return get_user(*arg, (int *)usp + n);
else
#endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Parri <[email protected]>
commit 09d3f015d1e1b4fee7e9bbdcf54201d239393391 upstream.
Commit:
142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.
However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().
Move the smp_rmb() accordingly. Also amend the comments associated
to the two memory barriers to indicate their actual locations.
Signed-off-by: Andrea Parri <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/uprobes.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -606,7 +606,7 @@ static int prepare_uprobe(struct uprobe
BUG_ON((uprobe->offset & ~PAGE_MASK) +
UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
- smp_wmb(); /* pairs with rmb() in find_active_uprobe() */
+ smp_wmb(); /* pairs with the smp_rmb() in handle_swbp() */
set_bit(UPROBE_COPY_INSN, &uprobe->flags);
out:
@@ -1892,10 +1892,18 @@ static void handle_swbp(struct pt_regs *
* After we hit the bp, _unregister + _register can install the
* new and not-yet-analyzed uprobe at the same address, restart.
*/
- smp_rmb(); /* pairs with wmb() in install_breakpoint() */
if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
goto out;
+ /*
+ * Pairs with the smp_wmb() in prepare_uprobe().
+ *
+ * Guarantees that if we see the UPROBE_COPY_INSN bit set, then
+ * we must also see the stores to &uprobe->arch performed by the
+ * prepare_uprobe() call.
+ */
+ smp_rmb();
+
/* Tracing handlers use ->utask to communicate with fetch methods */
if (!get_utask())
goto out;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <[email protected]>
commit 24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream.
If for some reason we failed to query the mr status, we need to make sure
to provide sufficient information for an ambiguous error (guard error on
sector 0).
Fixes: 0a7a08ad6f5f ("IB/iser: Implement check_protection")
Cc: <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/iser/iser_verbs.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -1289,7 +1289,9 @@ u8 iser_check_task_pi_status(struct iscs
IB_MR_CHECK_SIG_STATUS, &mr_status);
if (ret) {
pr_err("ib_check_mr_status failed, ret %d\n", ret);
- goto err;
+ /* Not a lot we can do, return ambiguous guard error */
+ *sector = 0;
+ return 0x1;
}
if (mr_status.fail_status & IB_MR_CHECK_SIG_STATUS) {
@@ -1317,7 +1319,4 @@ u8 iser_check_task_pi_status(struct iscs
}
return 0;
-err:
- /* Not alot we can do here, return ambiguous guard error */
- return 0x1;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
We want to release the unused reservation we have since it refills the
delayed refs reserve, which will make everything go smoother when
running the delayed refs if we're short on our reservation.
CC: [email protected] # 4.4+
Reviewed-by: Omar Sandoval <[email protected]>
Reviewed-by: Liu Bo <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/transaction.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index be8eae80ff65..098016338f98 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1821,6 +1821,9 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
return ret;
}
+ btrfs_trans_release_metadata(trans, root);
+ trans->block_rsv = NULL;
+
/* make a pass through all the delayed refs we have so far
* any runnings procs may add more while we are here
*/
@@ -1830,9 +1833,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
return ret;
}
- btrfs_trans_release_metadata(trans, root);
- trans->block_rsv = NULL;
-
cur_trans = trans->transaction;
/*
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 03bc996af0cc71c7f30c384d8ce7260172423b34 upstream.
Coprocessor context offsets are used by the assembly code that moves
coprocessor context between the individual fields of the
thread_info::xtregs_cp structure and coprocessor registers.
This fixes coprocessor context clobbering on flushing and reloading
during normal user code execution and user process debugging in the
presence of more than one coprocessor in the core configuration.
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/asm-offsets.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -90,14 +90,14 @@ int main(void)
DEFINE(THREAD_SP, offsetof (struct task_struct, thread.sp));
DEFINE(THREAD_CPENABLE, offsetof (struct thread_info, cpenable));
#if XTENSA_HAVE_COPROCESSORS
- DEFINE(THREAD_XTREGS_CP0, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP1, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP2, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP3, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP4, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP5, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP6, offsetof (struct thread_info, xtregs_cp));
- DEFINE(THREAD_XTREGS_CP7, offsetof (struct thread_info, xtregs_cp));
+ DEFINE(THREAD_XTREGS_CP0, offsetof(struct thread_info, xtregs_cp.cp0));
+ DEFINE(THREAD_XTREGS_CP1, offsetof(struct thread_info, xtregs_cp.cp1));
+ DEFINE(THREAD_XTREGS_CP2, offsetof(struct thread_info, xtregs_cp.cp2));
+ DEFINE(THREAD_XTREGS_CP3, offsetof(struct thread_info, xtregs_cp.cp3));
+ DEFINE(THREAD_XTREGS_CP4, offsetof(struct thread_info, xtregs_cp.cp4));
+ DEFINE(THREAD_XTREGS_CP5, offsetof(struct thread_info, xtregs_cp.cp5));
+ DEFINE(THREAD_XTREGS_CP6, offsetof(struct thread_info, xtregs_cp.cp6));
+ DEFINE(THREAD_XTREGS_CP7, offsetof(struct thread_info, xtregs_cp.cp7));
#endif
DEFINE(THREAD_XTREGS_USER, offsetof (struct thread_info, xtregs_user));
DEFINE(XTREGS_USER_SIZE, sizeof(xtregs_user_t));
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laura Abbott <[email protected]>
commit 1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream.
After 2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is
now only used when built in, resulting in a warning when compiled as a
module:
drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function]
static int kgdboc_option_setup(char *opt)
^~~~~~~~~~~~~~~~~~~
Move the function under the appropriate ifdef for builtin only.
Fixes: 2dd453168643 ("kgdboc: Fix restrict error")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Laura Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/kgdboc.c | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -131,24 +131,6 @@ static void kgdboc_unregister_kbd(void)
#define kgdboc_restore_input()
#endif /* ! CONFIG_KDB_KEYBOARD */
-static int kgdboc_option_setup(char *opt)
-{
- if (!opt) {
- pr_err("kgdboc: config string not provided\n");
- return -EINVAL;
- }
-
- if (strlen(opt) >= MAX_CONFIG_LEN) {
- printk(KERN_ERR "kgdboc: config string too long\n");
- return -ENOSPC;
- }
- strcpy(config, opt);
-
- return 0;
-}
-
-__setup("kgdboc=", kgdboc_option_setup);
-
static void cleanup_kgdboc(void)
{
if (kgdb_unregister_nmi_console())
@@ -316,6 +298,25 @@ static struct kgdb_io kgdboc_io_ops = {
};
#ifdef CONFIG_KGDB_SERIAL_CONSOLE
+static int kgdboc_option_setup(char *opt)
+{
+ if (!opt) {
+ pr_err("config string not provided\n");
+ return -EINVAL;
+ }
+
+ if (strlen(opt) >= MAX_CONFIG_LEN) {
+ pr_err("config string too long\n");
+ return -ENOSPC;
+ }
+ strcpy(config, opt);
+
+ return 0;
+}
+
+__setup("kgdboc=", kgdboc_option_setup);
+
+
/* This is only available if kgdboc is a built in for early debugging */
static int __init kgdboc_early_init(char *opt)
{
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 166126c1e54d927c2e8efa2702d420e0ce301fd9 upstream.
gcc 8.1.0 complains:
fs/kernfs/symlink.c:91:3: warning:
'strncpy' output truncated before terminating nul copying
as many bytes from a string as its length
fs/kernfs/symlink.c: In function 'kernfs_iop_get_link':
fs/kernfs/symlink.c:88:14: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/kernfs/symlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/kernfs/symlink.c
+++ b/fs/kernfs/symlink.c
@@ -88,7 +88,7 @@ static int kernfs_get_target_path(struct
int slen = strlen(kn->name);
len -= slen;
- strncpy(s + len, kn->name, slen);
+ memcpy(s + len, kn->name, slen);
if (len)
s[--len] = '/';
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit e1a7bfe3807974e66f971f2589d4e0197ec0fced upstream.
The procedure for adding a user control element has some window opened
for race against the concurrent removal of a user element. This was
caught by syzkaller, hitting a KASAN use-after-free error.
This patch addresses the bug by wrapping the whole procedure to add a
user control element with the card->controls_rwsem, instead of only
around the increment of card->user_ctl_count.
This required a slight code refactoring, too. The function
snd_ctl_add() is split to two parts: a core function to add the
control element and a part calling it. The former is called from the
function for adding a user control element inside the controls_rwsem.
One change to be noted is that snd_ctl_notify() for adding a control
element gets called inside the controls_rwsem as well while it was
called outside the rwsem. But this should be OK, as snd_ctl_notify()
takes another (finer) rwlock instead of rwsem, and the call of
snd_ctl_notify() inside rwsem is already done in another code path.
Reported-by: [email protected]
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/control.c | 80 ++++++++++++++++++++++++++++-----------------------
1 file changed, 45 insertions(+), 35 deletions(-)
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -346,6 +346,40 @@ static int snd_ctl_find_hole(struct snd_
return 0;
}
+/* add a new kcontrol object; call with card->controls_rwsem locked */
+static int __snd_ctl_add(struct snd_card *card, struct snd_kcontrol *kcontrol)
+{
+ struct snd_ctl_elem_id id;
+ unsigned int idx;
+ unsigned int count;
+
+ id = kcontrol->id;
+ if (id.index > UINT_MAX - kcontrol->count)
+ return -EINVAL;
+
+ if (snd_ctl_find_id(card, &id)) {
+ dev_err(card->dev,
+ "control %i:%i:%i:%s:%i is already present\n",
+ id.iface, id.device, id.subdevice, id.name, id.index);
+ return -EBUSY;
+ }
+
+ if (snd_ctl_find_hole(card, kcontrol->count) < 0)
+ return -ENOMEM;
+
+ list_add_tail(&kcontrol->list, &card->controls);
+ card->controls_count += kcontrol->count;
+ kcontrol->id.numid = card->last_numid + 1;
+ card->last_numid += kcontrol->count;
+
+ id = kcontrol->id;
+ count = kcontrol->count;
+ for (idx = 0; idx < count; idx++, id.index++, id.numid++)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_ADD, &id);
+
+ return 0;
+}
+
/**
* snd_ctl_add - add the control instance to the card
* @card: the card instance
@@ -362,45 +396,18 @@ static int snd_ctl_find_hole(struct snd_
*/
int snd_ctl_add(struct snd_card *card, struct snd_kcontrol *kcontrol)
{
- struct snd_ctl_elem_id id;
- unsigned int idx;
- unsigned int count;
int err = -EINVAL;
if (! kcontrol)
return err;
if (snd_BUG_ON(!card || !kcontrol->info))
goto error;
- id = kcontrol->id;
- if (id.index > UINT_MAX - kcontrol->count)
- goto error;
down_write(&card->controls_rwsem);
- if (snd_ctl_find_id(card, &id)) {
- up_write(&card->controls_rwsem);
- dev_err(card->dev, "control %i:%i:%i:%s:%i is already present\n",
- id.iface,
- id.device,
- id.subdevice,
- id.name,
- id.index);
- err = -EBUSY;
- goto error;
- }
- if (snd_ctl_find_hole(card, kcontrol->count) < 0) {
- up_write(&card->controls_rwsem);
- err = -ENOMEM;
- goto error;
- }
- list_add_tail(&kcontrol->list, &card->controls);
- card->controls_count += kcontrol->count;
- kcontrol->id.numid = card->last_numid + 1;
- card->last_numid += kcontrol->count;
- id = kcontrol->id;
- count = kcontrol->count;
+ err = __snd_ctl_add(card, kcontrol);
up_write(&card->controls_rwsem);
- for (idx = 0; idx < count; idx++, id.index++, id.numid++)
- snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_ADD, &id);
+ if (err < 0)
+ goto error;
return 0;
error:
@@ -1322,9 +1329,12 @@ static int snd_ctl_elem_add(struct snd_c
kctl->tlv.c = snd_ctl_elem_user_tlv;
/* This function manage to free the instance on failure. */
- err = snd_ctl_add(card, kctl);
- if (err < 0)
- return err;
+ down_write(&card->controls_rwsem);
+ err = __snd_ctl_add(card, kctl);
+ if (err < 0) {
+ snd_ctl_free_one(kctl);
+ goto unlock;
+ }
offset = snd_ctl_get_ioff(kctl, &info->id);
snd_ctl_build_ioff(&info->id, kctl, offset);
/*
@@ -1335,10 +1345,10 @@ static int snd_ctl_elem_add(struct snd_c
* which locks the element.
*/
- down_write(&card->controls_rwsem);
card->user_ctl_count++;
- up_write(&card->controls_rwsem);
+ unlock:
+ up_write(&card->controls_rwsem);
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit f505754fd6599230371cb01b9332754ddc104be1 upstream.
We were using the path name received from user space without checking that
it is null terminated. While btrfs-progs is well behaved and does proper
validation and null termination, someone could call the ioctl and pass
a non-null terminated patch, leading to buffer overrun problems in the
kernel. The ioctl is protected by CAP_SYS_ADMIN.
So just set the last byte of the path to a null character, similar to what
we do in other ioctls (add/remove/resize device, snapshot creation, etc).
CC: [email protected] # 4.4+
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/super.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -2104,6 +2104,7 @@ static long btrfs_control_ioctl(struct f
vol = memdup_user((void __user *)arg, sizeof(*vol));
if (IS_ERR(vol))
return PTR_ERR(vol);
+ vol->name[BTRFS_PATH_NAME_MAX] = '\0';
switch (cmd) {
case BTRFS_IOC_SCAN_DEV:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 2958b66694e018c552be0b60521fec27e8d12988 upstream.
coprocessor_flush_all may be called from a context of a thread that is
different from the thread being flushed. In that case contents of the
cpenable special register may not match ti->cpenable of the target
thread, resulting in unhandled coprocessor exception in the kernel
context.
Set cpenable special register to the ti->cpenable of the target register
for the duration of the flush and restore it afterwards.
This fixes the following crash caused by coprocessor register inspection
in native gdb:
(gdb) p/x $w0
Illegal instruction in kernel: sig: 9 [#1] PREEMPT
Call Trace:
___might_sleep+0x184/0x1a4
__might_sleep+0x41/0xac
exit_signals+0x14/0x218
do_exit+0xc9/0x8b8
die+0x99/0xa0
do_illegal_instruction+0x18/0x6c
common_exception+0x77/0x77
coprocessor_flush+0x16/0x3c
arch_ptrace+0x46c/0x674
sys_ptrace+0x2ce/0x3b4
system_call+0x54/0x80
common_exception+0x77/0x77
note: gdb[100] exited with preempt_count 1
Killed
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/process.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -83,18 +83,21 @@ void coprocessor_release_all(struct thre
void coprocessor_flush_all(struct thread_info *ti)
{
- unsigned long cpenable;
+ unsigned long cpenable, old_cpenable;
int i;
preempt_disable();
+ RSR_CPENABLE(old_cpenable);
cpenable = ti->cpenable;
+ WSR_CPENABLE(cpenable);
for (i = 0; i < XCHAL_CP_MAX; i++) {
if ((cpenable & 1) != 0 && coprocessor_owner[i] == ti)
coprocessor_flush(ti, i);
cpenable >>= 1;
}
+ WSR_CPENABLE(old_cpenable);
preempt_enable();
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 910b0797fa9e8af09c44a3fa36cb310ba7a7218d ]
Fix bug by moving the i2c_unregister_device calls after deregistration
of dvb frontend.
The new style i2c drivers already destroys the frontend object at
i2c_unregister_device time.
When the dvb frontend is unregistered afterwards it leads to this oops:
[ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8
[ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core]
[ 6058.866644] PGD 0
[ 6058.866646] P4D 0
[ 6058.866726] Oops: 0000 [#1] SMP
[ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops]
[ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G W O 4.13.9-gentoo #1
[ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014
[ 6058.867692] Workqueue: usb_hub_wq hub_event
[ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000
[ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core]
[ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293
[ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f
[ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028
[ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f
[ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028
[ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098
[ 6058.868419] FS: 0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000
[ 6058.868511] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0
[ 6058.868662] Call Trace:
[ 6058.868705] dvb_unregister_frontend+0x2a/0x80 [dvb_core]
[ 6058.868774] em28xx_dvb_fini+0x132/0x220 [em28xx_dvb]
[ 6058.868840] em28xx_close_extension+0x34/0x90 [em28xx]
[ 6058.868902] em28xx_usb_disconnect+0x4e/0x70 [em28xx]
[ 6058.868968] usb_unbind_interface+0x6d/0x260
[ 6058.869025] device_release_driver_internal+0x150/0x210
[ 6058.869094] device_release_driver+0xd/0x10
[ 6058.869150] bus_remove_device+0xe4/0x160
[ 6058.869204] device_del+0x1ce/0x2f0
[ 6058.869253] usb_disable_device+0x99/0x270
[ 6058.869306] usb_disconnect+0x8d/0x260
[ 6058.869359] hub_event+0x93d/0x1520
[ 6058.869408] ? dequeue_task_fair+0xae5/0xd20
[ 6058.869467] process_one_work+0x1d9/0x3e0
[ 6058.869522] worker_thread+0x43/0x3e0
[ 6058.869576] kthread+0x104/0x140
[ 6058.869602] ? trace_event_raw_event_workqueue_work+0x80/0x80
[ 6058.869640] ? kthread_create_on_node+0x40/0x40
[ 6058.869673] ret_from_fork+0x22/0x30
[ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8
[ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58
[ 6058.869894] CR2: 00000000000001f8
[ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]---
Signed-off-by: Matthias Schwarzott <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/em28xx/em28xx-dvb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1806,6 +1806,8 @@ static int em28xx_dvb_fini(struct em28xx
}
}
+ em28xx_unregister_dvb(dvb);
+
/* remove I2C SEC */
client = dvb->i2c_client_sec;
if (client) {
@@ -1827,7 +1829,6 @@ static int em28xx_dvb_fini(struct em28xx
i2c_unregister_device(client);
}
- em28xx_unregister_dvb(dvb);
kfree(dvb);
dev->dvb = NULL;
kref_put(&dev->ref, em28xx_free_device);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit 9a764c1e59684c0358e16ccaafd870629f2cfe67 ]
The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.
Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <[email protected]>
Reviewed-by: Ursula Braun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_core_main.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4519,8 +4519,8 @@ static int qeth_snmp_command_cb(struct q
{
struct qeth_ipa_cmd *cmd;
struct qeth_arp_query_info *qinfo;
- struct qeth_snmp_cmd *snmp;
unsigned char *data;
+ void *snmp_data;
__u16 data_len;
QETH_CARD_TEXT(card, 3, "snpcmdcb");
@@ -4528,7 +4528,6 @@ static int qeth_snmp_command_cb(struct q
cmd = (struct qeth_ipa_cmd *) sdata;
data = (unsigned char *)((char *)cmd - reply->offset);
qinfo = (struct qeth_arp_query_info *) reply->param;
- snmp = &cmd->data.setadapterparms.data.snmp;
if (cmd->hdr.return_code) {
QETH_CARD_TEXT_(card, 4, "scer1%x", cmd->hdr.return_code);
@@ -4541,10 +4540,15 @@ static int qeth_snmp_command_cb(struct q
return 0;
}
data_len = *((__u16 *)QETH_IPA_PDU_LEN_PDU1(data));
- if (cmd->data.setadapterparms.hdr.seq_no == 1)
- data_len -= (__u16)((char *)&snmp->data - (char *)cmd);
- else
- data_len -= (__u16)((char *)&snmp->request - (char *)cmd);
+ if (cmd->data.setadapterparms.hdr.seq_no == 1) {
+ snmp_data = &cmd->data.setadapterparms.data.snmp;
+ data_len -= offsetof(struct qeth_ipa_cmd,
+ data.setadapterparms.data.snmp);
+ } else {
+ snmp_data = &cmd->data.setadapterparms.data.snmp.request;
+ data_len -= offsetof(struct qeth_ipa_cmd,
+ data.setadapterparms.data.snmp.request);
+ }
/* check if there is enough room in userspace */
if ((qinfo->udata_len - qinfo->udata_offset) < data_len) {
@@ -4557,16 +4561,9 @@ static int qeth_snmp_command_cb(struct q
QETH_CARD_TEXT_(card, 4, "sseqn%i",
cmd->data.setadapterparms.hdr.seq_no);
/*copy entries to user buffer*/
- if (cmd->data.setadapterparms.hdr.seq_no == 1) {
- memcpy(qinfo->udata + qinfo->udata_offset,
- (char *)snmp,
- data_len + offsetof(struct qeth_snmp_cmd, data));
- qinfo->udata_offset += offsetof(struct qeth_snmp_cmd, data);
- } else {
- memcpy(qinfo->udata + qinfo->udata_offset,
- (char *)&snmp->request, data_len);
- }
+ memcpy(qinfo->udata + qinfo->udata_offset, snmp_data, data_len);
qinfo->udata_offset += data_len;
+
/* check if all replies received ... */
QETH_CARD_TEXT_(card, 4, "srtot%i",
cmd->data.setadapterparms.hdr.used_total);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 2cf2f0d5b91fd1b06a6ae260462fc7945ea84add upstream.
gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so
we should really use memmove(), which is defined to handle that correctly:
In function 'memcpy',
inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4:
/git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict]
return __builtin_memcpy(p, q, size);
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Jason Wessel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/debug/kdb/kdb_support.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -129,13 +129,13 @@ int kdbnearsym(unsigned long addr, kdb_s
}
if (i >= ARRAY_SIZE(kdb_name_table)) {
debug_kfree(kdb_name_table[0]);
- memcpy(kdb_name_table, kdb_name_table+1,
+ memmove(kdb_name_table, kdb_name_table+1,
sizeof(kdb_name_table[0]) *
(ARRAY_SIZE(kdb_name_table)-1));
} else {
debug_kfree(knt1);
knt1 = kdb_name_table[i];
- memcpy(kdb_name_table+i, kdb_name_table+i+1,
+ memmove(kdb_name_table+i, kdb_name_table+i+1,
sizeof(kdb_name_table[0]) *
(ARRAY_SIZE(kdb_name_table)-i-1));
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Niewöhner <[email protected]>
commit effd14f66cc1ef6701a19c5a56e39c35f4d395a5 upstream.
Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to
function correctly. This fixes a but where double pressing numlock locks
up the device completely with need to replug the keyboard.
Signed-off-by: Michael Niewöhner <[email protected]>
Tested-by: Michael Niewöhner <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -64,6 +64,9 @@ static const struct usb_device_id usb_qu
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
+ { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ]
In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.
In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".
[V2]
Remove unnecessary curly braces.
Signed-off-by: Vincent Chen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/faraday/ftmac100.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
index dce5f7b7f772..05e1f923f49e 100644
--- a/drivers/net/ethernet/faraday/ftmac100.c
+++ b/drivers/net/ethernet/faraday/ftmac100.c
@@ -865,11 +865,10 @@ static irqreturn_t ftmac100_interrupt(int irq, void *dev_id)
struct net_device *netdev = dev_id;
struct ftmac100 *priv = netdev_priv(netdev);
- if (likely(netif_running(netdev))) {
- /* Disable interrupts for polling */
- ftmac100_disable_all_int(priv);
+ /* Disable interrupts for polling */
+ ftmac100_disable_all_int(priv);
+ if (likely(netif_running(netdev)))
napi_schedule(&priv->napi);
- }
return IRQ_HANDLED;
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harry Pan <[email protected]>
commit 2f2dde6ba89b1ef1fe23c1138131b315d9aa4019 upstream.
Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is
in 0781:5591, will aggressively request LPM of U1/U2 during runtime,
when using this thumb drive as the OS installation key we found the
device will generate failure during U1 exit path making it dropped
from the USB bus, this causes a corrupted installation in system at
the end.
i.e.,
[ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004
[ 166.918327] usb usb2-port2: link state change
[ 166.918337] usb usb2-port2: do warm reset
[ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms
[ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms
[ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s
[ 167.276050] usb 2-2: USB disconnect, device number 2
[ 167.276058] usb 2-2: unregistering device
[ 167.276060] usb 2-2: unregistering interface 2-2:1.0
[ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk
[ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00
...
Analyzed the USB trace in the link layer we realized it is because
of the 6-ms timer of tRecoveryConfigurationTimeout which documented
on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from
Recovery.Configuration"; device initiates U1 exit -> Recovery.Active
-> Recovery.Configuration, then the host timer timeout makes the link
transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset.
Interestingly, the other higher volume of SanDisk Ultra Flair sharing
the same VID:PID, such as 64GB, would not request LPM during runtime,
it sticks at U0 always, thus disabling LPM does not affect those thumb
drives at all.
The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583.
Signed-off-by: Harry Pan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -188,6 +188,10 @@ static const struct usb_device_id usb_qu
/* Midiman M-Audio Keystation 88es */
{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* SanDisk Ultra Fit and Ultra Flair */
+ { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
+ { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 19ed3e2dd8549c1a34914e8dad01b64e7837645a ]
When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.
Cc: Ashok Raj <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Sohil Mehta <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Fixes: a222a7f0bb6c9 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel-svm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index 10068a481e22..cbde03e509c1 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -558,7 +558,7 @@ static irqreturn_t prq_event_thread(int irq, void *d)
pr_err("%s: Page request without PASID: %08llx %08llx\n",
iommu->name, ((unsigned long long *)req)[0],
((unsigned long long *)req)[1]);
- goto bad_req;
+ goto no_pasid;
}
if (!svm || svm->pasid != req->pasid) {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 5363857b916c1f48027e9b96ee8be8376bf20811 upstream.
As addressed in alsa-lib (commit b420056604f0), we need to fix the
case where the evaluation of PCM interval "(x x+1]" leading to
-EINVAL. After applying rules, such an interval may be translated as
"(x x+1)".
Fixes: ff2d6acdf6f1 ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/sound/pcm_params.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/include/sound/pcm_params.h
+++ b/include/sound/pcm_params.h
@@ -247,11 +247,13 @@ static inline int snd_interval_empty(con
static inline int snd_interval_single(const struct snd_interval *i)
{
return (i->min == i->max ||
- (i->min + 1 == i->max && i->openmax));
+ (i->min + 1 == i->max && (i->openmin || i->openmax)));
}
static inline int snd_interval_value(const struct snd_interval *i)
{
+ if (i->openmin && !i->openmax)
+ return i->max;
return i->min;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Shih <[email protected]>
commit 100bc3e2bebf95506da57cbdf5f26b25f6da4c81 upstream.
serial8250_register_8250_port calls uart_config_port, which calls
config_port on the port before it tries to power on the port. So we need
the port to be on before calling serial8250_register_8250_port. Change
the code to always do a runtime resume in probe before registering port,
and always do a runtime suspend in remove.
This basically reverts the change in commit 68e5fc4a255a ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use
pm_runtime callbacks.
Fixes: 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Signed-off-by: Peter Shih <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_mtk.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -231,17 +231,17 @@ static int mtk8250_probe(struct platform
platform_set_drvdata(pdev, data);
- pm_runtime_enable(&pdev->dev);
- if (!pm_runtime_enabled(&pdev->dev)) {
- err = mtk8250_runtime_resume(&pdev->dev);
- if (err)
- return err;
- }
+ err = mtk8250_runtime_resume(&pdev->dev);
+ if (err)
+ return err;
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
return 0;
}
@@ -252,13 +252,11 @@ static int mtk8250_remove(struct platfor
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
+ mtk8250_runtime_suspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- mtk8250_runtime_suspend(&pdev->dev);
-
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tikhomirov <[email protected]>
commit 6ff38bd40230af35e446239396e5fc8ebd6a5248 upstream.
If all pages are deleted from the mapping by memory reclaim and also
moved to the cleancache:
__delete_from_page_cache
(no shadow case)
unaccount_page_cache_page
cleancache_put_page
page_cache_delete
mapping->nrpages -= nr
(nrpages becomes 0)
We don't clean the cleancache for an inode after final file truncation
(removal).
truncate_inode_pages_final
check (nrpages || nrexceptional) is false
no truncate_inode_pages
no cleancache_invalidate_inode(mapping)
These way when reading the new file created with same inode we may get
these trash leftover pages from cleancache and see wrong data instead of
the contents of the new file.
Fix it by always doing truncate_inode_pages which is already ready for
nrpages == 0 && nrexceptional == 0 case and just invalidates inode.
[[email protected]: add comment, per Jan]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache")
Signed-off-by: Pavel Tikhomirov <[email protected]>
Reviewed-by: Vasily Averin <[email protected]>
Reviewed-by: Andrey Ryabinin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/truncate.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -432,9 +432,13 @@ void truncate_inode_pages_final(struct a
*/
spin_lock_irq(&mapping->tree_lock);
spin_unlock_irq(&mapping->tree_lock);
-
- truncate_inode_pages(mapping, 0);
}
+
+ /*
+ * Cleancache needs notification even if there are no pages or shadow
+ * entries.
+ */
+ truncate_inode_pages(mapping, 0);
}
EXPORT_SYMBOL(truncate_inode_pages_final);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Hoff <[email protected]>
commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream.
"of_get_named_gpio()" returns a negative error value if it fails
and drivers should check for this. This missing check was now
added to the matrix_keypad driver.
In my case "of_get_named_gpio()" returned -EPROBE_DEFER because
the referenced GPIOs belong to an I/O expander, which was not yet
probed at the point in time when the matrix_keypad driver was
loading. Because the driver did not check for errors from the
"of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER"
is actually a GPIO number and continued as usual, which led to further
errors like this later on:
WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114
gpio_to_desc+0xc8/0xd0
invalid GPIO -517
Note that the "GPIO number" -517 in the error message above is
actually "-EPROBE_DEFER".
As part of the patch a misleading error message "no platform data defined"
was also removed. This does not lead to information loss because the other
error paths in matrix_keypad_parse_dt() already print an error.
Signed-off-by: Christian Hoff <[email protected]>
Suggested-by: Sebastian Reichel <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/keyboard/matrix_keypad.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -405,7 +405,7 @@ matrix_keypad_parse_dt(struct device *de
struct matrix_keypad_platform_data *pdata;
struct device_node *np = dev->of_node;
unsigned int *gpios;
- int i, nrow, ncol;
+ int ret, i, nrow, ncol;
if (!np) {
dev_err(dev, "device lacks DT data\n");
@@ -447,12 +447,19 @@ matrix_keypad_parse_dt(struct device *de
return ERR_PTR(-ENOMEM);
}
- for (i = 0; i < pdata->num_row_gpios; i++)
- gpios[i] = of_get_named_gpio(np, "row-gpios", i);
+ for (i = 0; i < nrow; i++) {
+ ret = of_get_named_gpio(np, "row-gpios", i);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ gpios[i] = ret;
+ }
- for (i = 0; i < pdata->num_col_gpios; i++)
- gpios[pdata->num_row_gpios + i] =
- of_get_named_gpio(np, "col-gpios", i);
+ for (i = 0; i < ncol; i++) {
+ ret = of_get_named_gpio(np, "col-gpios", i);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ gpios[nrow + i] = ret;
+ }
pdata->row_gpios = gpios;
pdata->col_gpios = &gpios[pdata->num_row_gpios];
@@ -479,10 +486,8 @@ static int matrix_keypad_probe(struct pl
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
pdata = matrix_keypad_parse_dt(&pdev->dev);
- if (IS_ERR(pdata)) {
- dev_err(&pdev->dev, "no platform data defined\n");
+ if (IS_ERR(pdata))
return PTR_ERR(pdata);
- }
} else if (!pdata->keymap_data) {
dev_err(&pdev->dev, "no keymap data defined\n");
return -EINVAL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit b51abed8355e5556886623b2772fa6b7598d2282 upstream.
Currently the PCM core calls snd_pcm_unlink() always unconditionally
at closing a stream. However, since snd_pcm_unlink() invokes the
global rwsem down, the lock can be easily contended. More badly, when
a thread runs in a high priority RT-FIFO, it may stall at spinning.
Basically the call of snd_pcm_unlink() is required only for the linked
streams that are already rare occasion. For normal use cases, this
code path is fairly superfluous.
As an optimization (and also as a workaround for the RT problem
above in normal situations without linked streams), this patch adds a
check before calling snd_pcm_unlink() and calls it only when needed.
Reported-by: Chanho Min <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/pcm_native.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -2225,7 +2225,8 @@ int snd_pcm_hw_constraints_complete(stru
static void pcm_release_private(struct snd_pcm_substream *substream)
{
- snd_pcm_unlink(substream);
+ if (snd_pcm_stream_linked(substream))
+ snd_pcm_unlink(substream);
}
void snd_pcm_release_substream(struct snd_pcm_substream *substream)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 58930cced012adb01bc78b3687049b17ef44d0a3 upstream.
As gcc-8 points out, the bit mask check makes no sense here:
drivers/staging/rts5208/sd.c: In function 'ext_sd_send_cmd_get_rsp':
drivers/staging/rts5208/sd.c:4130:25: error: bitwise comparison always evaluates to true [-Werror=tautological-compare]
However, the code is even more bogus, as we have already
checked for the SD_RSP_TYPE_R0 case earlier in the function
and returned success. As seen in the mmc/sd driver core,
SD_RSP_TYPE_R0 means "no response" anyway, so checking for
a particular response would not help either.
This just removes the nonsensical code to get rid of the
warning.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rts5208/sd.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/staging/rts5208/sd.c
+++ b/drivers/staging/rts5208/sd.c
@@ -4165,12 +4165,6 @@ RTY_SEND_CMD:
rtsx_trace(chip);
return STATUS_FAIL;
}
-
- } else if (rsp_type == SD_RSP_TYPE_R0) {
- if ((ptr[3] & 0x1E) != 0x03) {
- rtsx_trace(chip);
- return STATUS_FAIL;
- }
}
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
commit a84a1bcc992f0545a51d2e120b8ca2ef20e2ea97 upstream.
There are two new Realtek card readers require ums-realtek to work
correctly.
Add the new IDs to support them.
Signed-off-by: Kai-Heng Feng <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_realtek.h | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -38,4 +38,14 @@ UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x99
"USB Card Reader",
USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+UNUSUAL_DEV(0x0bda, 0x0177, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
+UNUSUAL_DEV(0x0bda, 0x0184, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
#endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]
When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.
This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).
The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).
Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.
Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/mr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 93195191f45b..53833c06696f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -366,6 +366,7 @@ int mlx4_mr_hw_write_mpt(struct mlx4_dev *dev, struct mlx4_mr *mmr,
container_of((void *)mpt_entry, struct mlx4_cmd_mailbox,
buf);
+ (*mpt_entry)->lkey = 0;
err = mlx4_SW2HW_MPT(dev, mailbox, key);
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Theissen <[email protected]>
commit d7859905301880ad3e16272399d26900af3ac496 upstream.
Add another Apple Cinema Display to the list of supported displays.
Signed-off-by: Alexander Theissen <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/appledisplay.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -64,6 +64,7 @@ static const struct usb_device_id appled
{ APPLEDISPLAY_DEVICE(0x921c) },
{ APPLEDISPLAY_DEVICE(0x921d) },
{ APPLEDISPLAY_DEVICE(0x9222) },
+ { APPLEDISPLAY_DEVICE(0x9226) },
{ APPLEDISPLAY_DEVICE(0x9236) },
/* Terminating entry */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ]
Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
MFW - OCBB/OCSD functionality uses DMAE channel 14/15
Driver 0-3 and 8-11 (for PF dmae operations)
4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.
Changes from previous version:
------------------------------
v2: Incorporated the review comments.
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 7 +++++++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 1ea068815419..2491cdc2535c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2291,6 +2291,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
E1HVN_MAX)
+/* Following is the DMAE channel number allocation for the clients.
+ * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively.
+ * Driver: 0-3 and 8-11 (for PF dmae operations)
+ * 4 and 12 (for stats requests)
+ */
+#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */
+
/* PCIE link and speed */
#define PCICFG_LINK_WIDTH 0x1f00000
#define PCICFG_LINK_WIDTH_SHIFT 20
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index ff702a707a91..343e3366d751 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -5931,6 +5931,7 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag);
rdata->path_id = BP_PATH(bp);
rdata->network_cos_mode = start_params->network_cos_mode;
+ rdata->dmae_cmd_id = BNX2X_FW_DMAE_C;
rdata->vxlan_dst_port = cpu_to_le16(start_params->vxlan_dst_port);
rdata->geneve_dst_port = cpu_to_le16(start_params->geneve_dst_port);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ]
UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'
The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative. Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.
Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index f5fdbd53d052..db40387ffaf6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -537,8 +537,8 @@ struct slave_list {
struct resource_allocator {
spinlock_t alloc_lock; /* protect quotas */
union {
- int res_reserved;
- int res_port_rsvd[MLX4_MAX_PORTS];
+ unsigned int res_reserved;
+ unsigned int res_port_rsvd[MLX4_MAX_PORTS];
};
union {
int res_free;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit 38c7b224ce22c25fed04007839edf974bd13439d upstream.
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.
There was a comment about _why_ the code used strncpy - to avoid the
terminating NUL byte, but memcpy does the same and avoids the warning.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/unifdef.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -395,7 +395,7 @@ usage(void)
* When we have processed a group that starts off with a known-false
* #if/#elif sequence (which has therefore been deleted) followed by a
* #elif that we don't understand and therefore must keep, we edit the
- * latter into a #if to keep the nesting correct. We use strncpy() to
+ * latter into a #if to keep the nesting correct. We use memcpy() to
* overwrite the 4 byte token "elif" with "if " without a '\0' byte.
*
* When we find a true #elif in a group, the following block will
@@ -450,7 +450,7 @@ static void Idrop (void) { Fdrop(); ign
static void Itrue (void) { Ftrue(); ignoreon(); }
static void Ifalse(void) { Ffalse(); ignoreon(); }
/* modify this line */
-static void Mpass (void) { strncpy(keyword, "if ", 4); Pelif(); }
+static void Mpass (void) { memcpy(keyword, "if ", 4); Pelif(); }
static void Mtrue (void) { keywordedit("else"); state(IS_TRUE_MIDDLE); }
static void Melif (void) { keywordedit("endif"); state(IS_FALSE_TRAILER); }
static void Melse (void) { keywordedit("endif"); state(IS_FALSE_ELSE); }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laura Abbott <[email protected]>
commit 2dd453168643d9475028cd867c57e65956a0f7f9 upstream.
There's an error when compiled with restrict:
drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’:
drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same
as destination [-Werror=restrict]
strcpy(config, opt);
^~~~~~~~~~~~~~~~~~~
As the error implies, this is from trying to use config as both source and
destination. Drop the call to the function where config is the argument
since nothing else happens in the function.
Signed-off-by: Laura Abbott <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/kgdboc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -162,15 +162,13 @@ static int configure_kgdboc(void)
{
struct tty_driver *p;
int tty_line = 0;
- int err;
+ int err = -ENODEV;
char *cptr = config;
struct console *cons;
- err = kgdboc_option_setup(config);
- if (err || !strlen(config) || isspace(config[0]))
+ if (!strlen(config) || isspace(config[0]))
goto noconfig;
- err = -ENODEV;
kgdboc_io_ops.is_console = 0;
kgdb_tty_driver = NULL;
stable-rc/linux-4.4.y boot: 85 boots: 1 failed, 83 passed with 1 offline (v4.4.166-92-g216a0be637b7)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.166-92-g216a0be637b7/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.166-92-g216a0be637b7/
Tree: stable-rc
Branch: linux-4.4.y
Git Describe: v4.4.166-92-g216a0be637b7
Git Commit: 216a0be637b7dbf8db4aaad9810aba4ab15bb09c
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 42 unique boards, 20 SoC families, 11 builds out of 187
Boot Failure Detected:
arm64:
defconfig
qcom-qdf2400: 1 failed lab
Offline Platforms:
arm:
multi_v7_defconfig:
stih410-b2120: 1 offline lab
---
For more info write to <[email protected]>
On 12/11/18 8:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.167 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.167-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Tue, 11 Dec 2018 at 21:15, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.4.167 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.167-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
> Simon Guo <[email protected]>
> mm: mlock: avoid increase mm->locked_vm on mlock() when already mlock2(,MLOCK_ONFAULT)
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
NOTE:
LTP syscalls: mlock203 is been fixed on all devices.
Summary
------------------------------------------------------------------------
kernel: 4.4.167-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 216a0be637b7dbf8db4aaad9810aba4ab15bb09c
git describe: v4.4.166-92-g216a0be637b7
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.166-92-g216a0be637b7
No regressions (compared to build v4.4.166)
Fixes (compared to build v4.4.166)
-----------------------------------------------------------------------
LTP syscalls: mlock203 is been fixed on all devices.
Ran 16912 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* install-android-platform-tools-r2600
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
Summary
------------------------------------------------------------------------
kernel: 4.4.167-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.167-rc1-hikey-20181211-336
git commit: 904b62a2cb83665c4b38251201582a4f55649b7f
git describe: 4.4.167-rc1-hikey-20181211-336
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.167-rc1-hikey-20181211-336
No regressions (compared to build 4.4.167-rc1-hikey-20181209-335)
No fixes (compared to build 4.4.167-rc1-hikey-20181209-335)
Ran 2748 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
- qemu_arm64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
--
Linaro LKFT
https://lkft.linaro.org
On 12/11/18 7:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.167 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
> Anything received after that time might be too late.
>
[ preliminary ]
arm:allmodconfig, arm:omap2plus_defconfig:
drivers/dma/cppi41.c: In function 'cppi41_stop_chan':
include/linux/kernel.h:815:27: error: 'struct cppi41_channel' has no member named 'node'
[and various other similar errors]
The same problem also affects v3.18.y.
Guenter
Hi Greg,
On Tue, Dec 11, 2018 at 04:41:40PM +0100, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
Please drop this patch. It really should go back to v4.9 but not older.
The Fixes should instead be
fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
I am sorry for the noise.
>
> ------------------
>
> From: Bin Liu <[email protected]>
>
> commit 59861547ec9a9736e7882f6fb0c096a720ff811a upstream.
>
> The driver defines three states for a cppi channel.
> - idle: .chan_busy == 0 && not in .pending list
> - pending: .chan_busy == 0 && in .pending list
> - busy: .chan_busy == 1 && not in .pending list
>
> There are cases in which the cppi channel could be in the pending state
> when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
> is called.
>
> cppi41_stop_chan() has a bug for these cases to set channels to idle state.
> It only checks the .chan_busy flag, but not the .pending list, then later
> when cppi41_runtime_resume() is called the channels in .pending list will
> be transitioned to busy state.
>
> Removing channels from the .pending list solves the problem.
>
> Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy")
> Cc: [email protected] # v3.15+
> Signed-off-by: Bin Liu <[email protected]>
> Reviewed-by: Peter Ujfalusi <[email protected]>
> Signed-off-by: Vinod Koul <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Regards,
-Bin.
On Wed, Dec 12, 2018 at 06:24:28AM -0800, Guenter Roeck wrote:
> On 12/11/18 7:40 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.167 release.
> > There are 91 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> [ preliminary ]
>
> arm:allmodconfig, arm:omap2plus_defconfig:
>
> drivers/dma/cppi41.c: In function 'cppi41_stop_chan':
> include/linux/kernel.h:815:27: error: 'struct cppi41_channel' has no member named 'node'
>
> [and various other similar errors]
>
> The same problem also affects v3.18.y.
Patch now dropped and a -rc2 pushed out for 3.18.y and 4.4.y with that
removed.
thanks,
greg k-h
On 11 December 2018 9:10:19 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
>This is the start of the stable review cycle for the 4.4.167 release.
>There are 91 patches in this series, all will be posted as a response
>to this one. If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.167-rc1.gz
>or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-4.4.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
Merged and build tested using GCC 7.3.1, GCC 8.2.1 and Clang 8.0.6 with -Werror, no build or dmesg regressions on the Pixel 2.
--
Harsh Shandilya
PRJKT Development LLC
On Tue, Dec 11, 2018 at 04:40:19PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.167 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
> Anything received after that time might be too late.
>
For v4.4.166-91-gf16ad7a4b88c:
Build results:
total: 170 pass: 170 fail: 0
Qemu test results:
total: 288 pass: 288 fail: 0
Details are available at https://kerneltests.org/builders/.
Guenter
On Thu, Dec 13, 2018 at 12:45:00AM +0530, Harsh Shandilya wrote:
> On 11 December 2018 9:10:19 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >This is the start of the stable review cycle for the 4.4.167 release.
> >There are 91 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Thu Dec 13 15:15:44 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.167-rc1.gz
> >or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-4.4.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> Merged and build tested using GCC 7.3.1, GCC 8.2.1 and Clang 8.0.6 with -Werror, no build or dmesg regressions on the Pixel 2.
great, thanks for testing and letting me know.
greg k-h