This is the start of the stable review cycle for the 4.4.170 release.
There are 88 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Jan 13 13:09:58 UTC 2019.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.170-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.170-rc1
Lubomir Rintel <[email protected]>
power: supply: olpc_battery: correct the temperature units
Alexander Shishkin <[email protected]>
intel_th: msu: Fix an off-by-one in attribute store
Christian Borntraeger <[email protected]>
genwqe: Fix size check
Yan, Zheng <[email protected]>
ceph: don't update importing cap's mseq when handing cap export
Sohil Mehta <[email protected]>
iommu/vt-d: Handle domain agaw being less than iommu agaw
Dominique Martinet <[email protected]>
9p/net: put a lower bound on msize
Larry Finger <[email protected]>
b43: Fix error in cordic routine
Andreas Gruenbacher <[email protected]>
gfs2: Fix loop in gfs2_rbm_find
Vasily Averin <[email protected]>
dlm: memory leaks on error path in dlm_user_request()
Vasily Averin <[email protected]>
dlm: lost put_lkb on error path in receive_convert() and receive_unlock()
Vasily Averin <[email protected]>
dlm: possible memory leak on error path in create_lkb()
Vasily Averin <[email protected]>
dlm: fixed memory leaks after failed ls_remove_names allocation
Hui Peng <[email protected]>
ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks
Takashi Iwai <[email protected]>
ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
Dan Carpenter <[email protected]>
ALSA: cs46xx: Potential NULL dereference in probe
Ming Lei <[email protected]>
block: don't deal with discard limit in blkdev_issue_discard()
Jens Axboe <[email protected]>
block: break discard submissions into the user defined size
Eric Biggers <[email protected]>
crypto: x86/chacha20 - avoid sleeping with preemption disabled
Vasily Averin <[email protected]>
sunrpc: use SVC_NET() in svcauth_gss_* functions
Vasily Averin <[email protected]>
sunrpc: fix cache_head leak due to queued request
Dan Williams <[email protected]>
mm, devm_memremap_pages: kill mapping "System RAM" support
Dan Williams <[email protected]>
mm, devm_memremap_pages: mark devm_memremap_pages() EXPORT_SYMBOL_GPL
Michal Hocko <[email protected]>
hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined
David Herrmann <[email protected]>
fork: record start_time late
Steffen Maier <[email protected]>
scsi: zfcp: fix posting too many status read buffers leading to adapter shutdown
Tony Lindgren <[email protected]>
Input: omap-keypad - fix idle configuration to not block SoC idle states
Dan Carpenter <[email protected]>
scsi: bnx2fc: Fix NULL dereference in error handling
Benjamin Poirier <[email protected]>
xfrm: Fix bucket count reported to userspace
Qian Cai <[email protected]>
checkstack.pl: fix for aarch64
Peter Hutterer <[email protected]>
Input: restore EV_ABS ABS_RESERVED
Anson Huang <[email protected]>
ARM: imx: update the cpu power up timing setting on i.mx6sx
Paul Mackerras <[email protected]>
powerpc: Fix COFF zImage booting on old powermacs
Lukas Wunner <[email protected]>
spi: bcm2835: Unbreak the build of esoteric configs
Vitaly Kuznetsov <[email protected]>
x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
Georgy A Bystrenin <[email protected]>
CIFS: Fix error mapping for SMB2_LOCK command which caused OFD lock problem
Huacai Chen <[email protected]>
MIPS: Align kernel load address to 64KB
Huacai Chen <[email protected]>
MIPS: Ensure pmd_present() returns false after pmd_mknotpresent()
Hans Verkuil <[email protected]>
media: vivid: free bitmap_cap when updating std/timings/etc.
Macpaul Lin <[email protected]>
cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.
Lukas Wunner <[email protected]>
spi: bcm2835: Avoid finishing transfer prematurely in IRQ mode
Lukas Wunner <[email protected]>
spi: bcm2835: Fix book-keeping of DMA termination
Lukas Wunner <[email protected]>
spi: bcm2835: Fix race on DMA termination
Theodore Ts'o <[email protected]>
ext4: force inode writes when nfsd calls commit_metadata()
ruippan (潘睿) <[email protected]>
ext4: fix EXT4_IOC_GROUP_ADD ioctl
Maurizio Lombardi <[email protected]>
ext4: missing unlock/put_page() in ext4_try_to_write_inline_data()
Pan Bian <[email protected]>
ext4: fix possible use after free in ext4_quota_enable
Ben Hutchings <[email protected]>
perf pmu: Suppress potential format-truncation warning
Sean Christopherson <[email protected]>
KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
Patrick Dreyer <[email protected]>
Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G
Jia-Ju Bai <[email protected]>
usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
Jörgen Storvist <[email protected]>
USB: serial: option: add Fibocom NL678 series
Scott Chen <[email protected]>
USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
Sameer Pujar <[email protected]>
ALSA: hda/tegra: clear pending irq handlers
Mantas Mikulėnas <[email protected]>
ALSA: hda: add mute LED support for HP EliteBook 840 G4
Gustavo A. R. Silva <[email protected]>
ALSA: emux: Fix potential Spectre v1 vulnerabilities
Gustavo A. R. Silva <[email protected]>
ALSA: pcm: Fix potential Spectre v1 vulnerability
Gustavo A. R. Silva <[email protected]>
ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
Gustavo A. R. Silva <[email protected]>
ALSA: rme9652: Fix potential Spectre v1 vulnerability
Deepa Dinamani <[email protected]>
sock: Make sock->sk_stamp thread-safe
Lorenzo Bianconi <[email protected]>
gro_cell: add napi_disable in gro_cells_destroy
Juergen Gross <[email protected]>
xen/netfront: tolerate frags with no data
Jorgen Hansen <[email protected]>
VSOCK: Send reset control packet when socket is partially bound
Jason Wang <[email protected]>
vhost: make sure used idx is seen before log in vhost_add_used_n()
Xin Long <[email protected]>
sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event
Willem de Bruijn <[email protected]>
packet: validate address length if non-zero
Willem de Bruijn <[email protected]>
packet: validate address length
Cong Wang <[email protected]>
netrom: fix locking in nr_find_socket()
Eric Dumazet <[email protected]>
isdn: fix kernel-infoleak in capi_unlocked_ioctl
Cong Wang <[email protected]>
ipv6: explicitly initialize udp6_addr in udp_sock_create6()
Willem de Bruijn <[email protected]>
ieee802154: lowpan_header_create check must check daddr
Tyrel Datwyler <[email protected]>
ibmveth: fix DMA unmap error in ibmveth_xmit_start error path
Cong Wang <[email protected]>
ax25: fix a use-after-free in ax25_fillin_cb()
Gustavo A. R. Silva <[email protected]>
ipv4: Fix potential Spectre v1 vulnerability
Gustavo A. R. Silva <[email protected]>
ip6mr: Fix potential Spectre v1 vulnerability
Gustavo A. R. Silva <[email protected]>
drm/ioctl: Fix Spectre v1 vulnerabilities
Colin Ian King <[email protected]>
x86/mtrr: Don't copy uninitialized gentry fields back to userspace
Dexuan Cui <[email protected]>
Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels
Christophe Leroy <[email protected]>
gpio: max7301: fix driver for use with CONFIG_VMAP_STACK
Russell King <[email protected]>
mmc: omap_hsmmc: fix DMA API warning
Ulf Hansson <[email protected]>
mmc: core: Reset HPI enabled state during re-init and in case of errors
Jörgen Storvist <[email protected]>
USB: serial: option: add Telit LN940 series
Jörgen Storvist <[email protected]>
USB: serial: option: add Fibocom NL668 series
Jörgen Storvist <[email protected]>
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
Tore Anderson <[email protected]>
USB: serial: option: add HP lt4132
Jörgen Storvist <[email protected]>
USB: serial: option: add GosunCn ZTE WeLink ME3630
Mathias Nyman <[email protected]>
xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only
Hui Peng <[email protected]>
USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data
-------------
Diffstat:
Makefile | 4 +-
arch/arm/mach-imx/cpuidle-imx6sx.c | 2 +-
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c | 7 ++-
arch/mips/include/asm/pgtable-64.h | 5 ++
arch/powerpc/boot/crt0.S | 4 +-
arch/x86/crypto/chacha20_glue.c | 1 +
arch/x86/include/asm/kvm_host.h | 2 +-
arch/x86/kernel/cpu/mtrr/if.c | 2 +
arch/x86/kvm/vmx.c | 19 +++++-
arch/x86/kvm/x86.c | 3 +-
block/blk-lib.c | 26 ++-------
drivers/gpio/gpio-max7301.c | 12 +---
drivers/gpu/drm/drm_ioctl.c | 10 +++-
drivers/hv/vmbus_drv.c | 20 +++++++
drivers/hwtracing/intel_th/msu.c | 3 +-
drivers/input/keyboard/omap4-keypad.c | 16 ++----
drivers/input/mouse/elan_i2c_core.c | 1 +
drivers/iommu/intel-iommu.c | 4 +-
drivers/isdn/capi/kcapi.c | 4 +-
drivers/media/platform/vivid/vivid-vid-cap.c | 2 +
drivers/misc/genwqe/card_utils.c | 2 +-
drivers/mmc/core/mmc.c | 4 +-
drivers/mmc/host/omap_hsmmc.c | 12 +++-
drivers/net/ethernet/ibm/ibmveth.c | 6 +-
drivers/net/usb/hso.c | 18 +++++-
drivers/net/wireless/b43/phy_common.c | 2 +-
drivers/net/xen-netfront.c | 2 +-
drivers/power/olpc_battery.c | 4 +-
drivers/s390/scsi/zfcp_aux.c | 6 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
drivers/spi/spi-bcm2835.c | 16 +++---
drivers/usb/class/cdc-acm.c | 10 ++++
drivers/usb/class/cdc-acm.h | 1 +
drivers/usb/host/r8a66597-hcd.c | 5 +-
drivers/usb/host/xhci-hub.c | 3 +-
drivers/usb/serial/option.c | 20 ++++++-
drivers/usb/serial/pl2303.c | 5 ++
drivers/usb/serial/pl2303.h | 5 ++
drivers/vhost/vhost.c | 2 +
fs/ceph/caps.c | 1 -
fs/cifs/smb2maperror.c | 4 +-
fs/dlm/lock.c | 17 +++---
fs/dlm/lockspace.c | 2 +-
fs/ext4/inline.c | 5 +-
fs/ext4/resize.c | 2 +-
fs/ext4/super.c | 13 ++++-
fs/gfs2/rgrp.c | 2 +-
include/net/gro_cells.h | 1 +
include/net/sock.h | 36 +++++++++++-
include/trace/events/ext4.h | 20 +++++++
include/uapi/linux/input-event-codes.h | 9 +++
kernel/fork.c | 13 ++++-
kernel/memremap.c | 11 ++--
mm/memory_hotplug.c | 16 ++++++
net/9p/client.c | 21 +++++++
net/ax25/af_ax25.c | 11 +++-
net/ax25/ax25_dev.c | 2 +
net/compat.c | 15 +++--
net/core/sock.c | 3 +
net/ieee802154/6lowpan/tx.c | 3 +
net/ipv4/ipmr.c | 2 +
net/ipv6/ip6_udp_tunnel.c | 3 +-
net/ipv6/ip6mr.c | 4 ++
net/netrom/af_netrom.c | 15 +++--
net/packet/af_packet.c | 8 ++-
net/sctp/ipv6.c | 1 +
net/sunrpc/auth_gss/svcauth_gss.c | 8 +--
net/sunrpc/cache.c | 10 +++-
net/sunrpc/svcsock.c | 2 +-
net/vmw_vsock/vmci_transport.c | 67 ++++++++++++++++------
net/xfrm/xfrm_state.c | 2 +-
scripts/checkstack.pl | 4 +-
sound/core/pcm.c | 2 +
sound/pci/cs46xx/dsp_spos.c | 3 +
sound/pci/emu10k1/emufx.c | 5 ++
sound/pci/hda/hda_tegra.c | 2 +
sound/pci/hda/patch_conexant.c | 1 +
sound/pci/rme9652/hdsp.c | 10 ++--
sound/synth/emux/emux_hwdep.c | 7 ++-
sound/usb/mixer.c | 10 +++-
sound/usb/quirks-table.h | 3 +
tools/perf/util/pmu.c | 8 +--
82 files changed, 489 insertions(+), 167 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrick Dreyer <[email protected]>
commit 7db54c89f0b30a101584e09d3729144e6170059d upstream.
This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS
Aspire F5-573G.
Signed-off-by: Patrick Dreyer <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1240,6 +1240,7 @@ MODULE_DEVICE_TABLE(i2c, elan_id);
static const struct acpi_device_id elan_acpi_id[] = {
{ "ELAN0000", 0 },
{ "ELAN0100", 0 },
+ { "ELAN0501", 0 },
{ "ELAN0600", 0 },
{ "ELAN0602", 0 },
{ "ELAN0605", 0 },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c201e3808e0e4be9b98d192802085a9f491bd80c ]
ABS_RESERVED was added in d9ca1c990a7 and accidentally removed as part of
ffe0e7cf290f5c9 when the high-resolution scrolling code was removed.
Signed-off-by: Peter Hutterer <[email protected]>
Reviewed-by: Martin Kepplinger <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/input-event-codes.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 87cf351bab03..9e07bf4259e1 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -708,6 +708,15 @@
#define ABS_MISC 0x28
+/*
+ * 0x2e is reserved and should not be used in input drivers.
+ * It was used by HID as ABS_MISC+6 and userspace needs to detect if
+ * the next ABS_* event is correct or is just ABS_MISC + n.
+ * We define here ABS_RESERVED so userspace can rely on it and detect
+ * the situation described above.
+ */
+#define ABS_RESERVED 0x2e
+
#define ABS_MT_SLOT 0x2f /* MT slot being modified */
#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
In chacha20-simd, clear the MAY_SLEEP flag in the blkcipher_desc to
prevent sleeping with preemption disabled, under kernel_fpu_begin().
This was fixed upstream incidentally by a large refactoring,
commit 9ae433bc79f9 ("crypto: chacha20 - convert generic and x86
versions to skcipher"). But syzkaller easily trips over this when
running on older kernels, as it's easily reachable via AF_ALG.
Therefore, this patch makes the minimal fix for older kernels.
Fixes: c9320b6dcb89 ("crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64")
Cc: [email protected]
Cc: Martin Willi <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/crypto/chacha20_glue.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/crypto/chacha20_glue.c
+++ b/arch/x86/crypto/chacha20_glue.c
@@ -77,6 +77,7 @@ static int chacha20_simd(struct blkciphe
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt_block(desc, &walk, CHACHA20_BLOCK_SIZE);
+ desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
crypto_chacha20_init(state, crypto_blkcipher_ctx(desc->tfm), walk.iv);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit b982896cdb6e6a6b89d86dfb39df489d9df51e14 upstream.
If allocation fails on last elements of array need to free already
allocated elements.
v2: just move existing out_rsbtbl label to right place
Fixes 789924ba635f ("dlm: fix race between remove and lookup")
Cc: [email protected] # 3.6
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/lockspace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -673,11 +673,11 @@ static int new_lockspace(const char *nam
kfree(ls->ls_recover_buf);
out_lkbidr:
idr_destroy(&ls->ls_lkbidr);
+ out_rsbtbl:
for (i = 0; i < DLM_REMOVE_NAMES_MAX; i++) {
if (ls->ls_remove_names[i])
kfree(ls->ls_remove_names[i]);
}
- out_rsbtbl:
vfree(ls->ls_rsbtbl);
out_lsfree:
if (do_unreg)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 23851e978f31eda8b2d01bd410d3026659ca06c7 upstream.
Fixes 3d6aa675fff9 ("dlm: keep lkbs in idr")
Cc: [email protected] # 3.1
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/lock.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -1210,6 +1210,7 @@ static int create_lkb(struct dlm_ls *ls,
if (rv < 0) {
log_error(ls, "create_lkb idr error %d", rv);
+ dlm_free_lkb(lkb);
return rv;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jorgen Hansen <[email protected]>
[ Upstream commit a915b982d8f5e4295f64b8dd37ce753874867e88 ]
If a server side socket is bound to an address, but not in the listening
state yet, incoming connection requests should receive a reset control
packet in response. However, the function used to send the reset
silently drops the reset packet if the sending socket isn't bound
to a remote address (as is the case for a bound socket not yet in
the listening state). This change fixes this by using the src
of the incoming packet as destination for the reset packet in
this case.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Adit Ranadive <[email protected]>
Reviewed-by: Vishnu Dasa <[email protected]>
Signed-off-by: Jorgen Hansen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/vmw_vsock/vmci_transport.c | 67 ++++++++++++++++++++++++++++++-----------
1 file changed, 50 insertions(+), 17 deletions(-)
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -273,6 +273,31 @@ vmci_transport_send_control_pkt_bh(struc
}
static int
+vmci_transport_alloc_send_control_pkt(struct sockaddr_vm *src,
+ struct sockaddr_vm *dst,
+ enum vmci_transport_packet_type type,
+ u64 size,
+ u64 mode,
+ struct vmci_transport_waiting_info *wait,
+ u16 proto,
+ struct vmci_handle handle)
+{
+ struct vmci_transport_packet *pkt;
+ int err;
+
+ pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
+ err = __vmci_transport_send_control_pkt(pkt, src, dst, type, size,
+ mode, wait, proto, handle,
+ true);
+ kfree(pkt);
+
+ return err;
+}
+
+static int
vmci_transport_send_control_pkt(struct sock *sk,
enum vmci_transport_packet_type type,
u64 size,
@@ -281,9 +306,7 @@ vmci_transport_send_control_pkt(struct s
u16 proto,
struct vmci_handle handle)
{
- struct vmci_transport_packet *pkt;
struct vsock_sock *vsk;
- int err;
vsk = vsock_sk(sk);
@@ -293,17 +316,10 @@ vmci_transport_send_control_pkt(struct s
if (!vsock_addr_bound(&vsk->remote_addr))
return -EINVAL;
- pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
- if (!pkt)
- return -ENOMEM;
-
- err = __vmci_transport_send_control_pkt(pkt, &vsk->local_addr,
- &vsk->remote_addr, type, size,
- mode, wait, proto, handle,
- true);
- kfree(pkt);
-
- return err;
+ return vmci_transport_alloc_send_control_pkt(&vsk->local_addr,
+ &vsk->remote_addr,
+ type, size, mode,
+ wait, proto, handle);
}
static int vmci_transport_send_reset_bh(struct sockaddr_vm *dst,
@@ -321,12 +337,29 @@ static int vmci_transport_send_reset_bh(
static int vmci_transport_send_reset(struct sock *sk,
struct vmci_transport_packet *pkt)
{
+ struct sockaddr_vm *dst_ptr;
+ struct sockaddr_vm dst;
+ struct vsock_sock *vsk;
+
if (pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST)
return 0;
- return vmci_transport_send_control_pkt(sk,
- VMCI_TRANSPORT_PACKET_TYPE_RST,
- 0, 0, NULL, VSOCK_PROTO_INVALID,
- VMCI_INVALID_HANDLE);
+
+ vsk = vsock_sk(sk);
+
+ if (!vsock_addr_bound(&vsk->local_addr))
+ return -EINVAL;
+
+ if (vsock_addr_bound(&vsk->remote_addr)) {
+ dst_ptr = &vsk->remote_addr;
+ } else {
+ vsock_addr_init(&dst, pkt->dg.src.context,
+ pkt->src_port);
+ dst_ptr = &dst;
+ }
+ return vmci_transport_alloc_send_control_pkt(&vsk->local_addr, dst_ptr,
+ VMCI_TRANSPORT_PACKET_TYPE_RST,
+ 0, 0, NULL, VSOCK_PROTO_INVALID,
+ VMCI_INVALID_HANDLE);
}
static int vmci_transport_send_negotiate(struct sock *sk, size_t size)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit d47b41aceeadc6b58abc9c7c6485bef7cfb75636 upstream.
According to comment in dlm_user_request() ua should be freed
in dlm_free_lkb() after successful attach to lkb.
However ua is attached to lkb not in set_lock_args() but later,
inside request_lock().
Fixes 597d0cae0f99 ("[DLM] dlm: user locks")
Cc: [email protected] # 2.6.19
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/lock.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -5795,20 +5795,20 @@ int dlm_user_request(struct dlm_ls *ls,
goto out;
}
}
-
- /* After ua is attached to lkb it will be freed by dlm_free_lkb().
- When DLM_IFL_USER is set, the dlm knows that this is a userspace
- lock and that lkb_astparam is the dlm_user_args structure. */
-
error = set_lock_args(mode, &ua->lksb, flags, namelen, timeout_cs,
fake_astfn, ua, fake_bastfn, &args);
- lkb->lkb_flags |= DLM_IFL_USER;
-
if (error) {
+ kfree(ua->lksb.sb_lvbptr);
+ ua->lksb.sb_lvbptr = NULL;
+ kfree(ua);
__put_lkb(ls, lkb);
goto out;
}
+ /* After ua is attached to lkb it will be freed by dlm_free_lkb().
+ When DLM_IFL_USER is set, the dlm knows that this is a userspace
+ lock and that lkb_astparam is the dlm_user_args structure. */
+ lkb->lkb_flags |= DLM_IFL_USER;
error = request_lock(ls, lkb, name, namelen, &args);
switch (error) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 94ffb030b6d31ec840bb811be455dd2e26a4f43e upstream.
stream is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/core/pcm.c:140 snd_pcm_control_ioctl() warn: potential spectre issue 'pcm->streams' [r] (local cap)
Fix this by sanitizing stream before using it to index pcm->streams
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Cc: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/pcm.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -25,6 +25,7 @@
#include <linux/time.h>
#include <linux/mutex.h>
#include <linux/device.h>
+#include <linux/nospec.h>
#include <sound/core.h>
#include <sound/minors.h>
#include <sound/pcm.h>
@@ -125,6 +126,7 @@ static int snd_pcm_control_ioctl(struct
return -EFAULT;
if (stream < 0 || stream > 1)
return -EINVAL;
+ stream = array_index_nospec(stream, 2);
if (get_user(subdevice, &info->subdevice))
return -EFAULT;
mutex_lock(®ister_mutex);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jörgen Storvist <[email protected]>
commit 30360224441ce89a98ed627861e735beb4010775 upstream.
Added USB serial option driver support for Fibocom NL668 series cellular
modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces.
usb-devices output (QMI mode)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1508 ProdID=1001 Rev=03.18
S: Manufacturer=Nodecom NL668 Modem
S: Product=Nodecom NL668-CN Modem
S: SerialNumber=
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
usb-devices output (ECM mode)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1508 ProdID=1001 Rev=03.18
S: Manufacturer=Nodecom NL668 Modem
S: Product=Nodecom NL668-CN Modem
S: SerialNumber=
C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
Signed-off-by: Jörgen Storvist <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1950,6 +1950,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+ { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */
+ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Chen <[email protected]>
commit 8d503f206c336677954160ac62f0c7d9c219cd89 upstream.
Add device ids to pl2303 for the HP POS pole displays:
LM920: 03f0:026b
TD620: 03f0:0956
LD960TA: 03f0:4439
LD220TA: 03f0:4349
LM940: 03f0:5039
Signed-off-by: Scott Chen <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 5 +++++
drivers/usb/serial/pl2303.h | 5 +++++
2 files changed, 10 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -86,9 +86,14 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -123,10 +123,15 @@
/* Hewlett-Packard POS Pole Displays */
#define HP_VENDOR_ID 0x03f0
+#define HP_LM920_PRODUCT_ID 0x026b
+#define HP_TD620_PRODUCT_ID 0x0956
#define HP_LD960_PRODUCT_ID 0x0b39
#define HP_LCM220_PRODUCT_ID 0x3139
#define HP_LCM960_PRODUCT_ID 0x3239
#define HP_LD220_PRODUCT_ID 0x3524
+#define HP_LD220TA_PRODUCT_ID 0x4349
+#define HP_LD960TA_PRODUCT_ID 0x4439
+#define HP_LM940_PRODUCT_ID 0x5039
/* Cressi Edy (diving computer) PC interface */
#define CRESSI_VENDOR_ID 0x04b8
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Hajnoczi <[email protected]>
commit a72b69dc083a931422cc8a5e33841aff7d5312f2 upstream.
The vhost_vsock->guest_cid field is uninitialized when /dev/vhost-vsock
is opened until the VHOST_VSOCK_SET_GUEST_CID ioctl is called.
kvmalloc(..., GFP_KERNEL | __GFP_RETRY_MAYFAIL) does not zero memory.
All other vhost_vsock fields are initialized explicitly so just
initialize this field too.
Signed-off-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Cc: Daniel Verkamp <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index c9de9c41aa97..5a5e981bd8e4 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -518,6 +518,8 @@ static int vhost_vsock_dev_open(struct inode *inode, struct file *file)
goto out;
}
+ vsock->guest_cid = 0; /* no CID assigned yet */
+
atomic_set(&vsock->queued_replies, 0);
vqs[VSOCK_VQ_TX] = &vsock->vqs[VSOCK_VQ_TX];
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maurizio Lombardi <[email protected]>
commit 132d00becb31e88469334e1e62751c81345280e0 upstream.
In case of error, ext4_try_to_write_inline_data() should unlock
and release the page it holds.
Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data")
Cc: [email protected] # 3.8
Signed-off-by: Maurizio Lombardi <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inline.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -701,8 +701,11 @@ int ext4_try_to_write_inline_data(struct
if (!PageUptodate(page)) {
ret = ext4_read_inline_page(inode, page);
- if (ret < 0)
+ if (ret < 0) {
+ unlock_page(page);
+ put_page(page);
goto out_up_read;
+ }
}
ret = 1;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: ruippan (潘睿) <[email protected]>
commit e647e29196b7f802f8242c39ecb7cc937f5ef217 upstream.
Commit e2b911c53584 ("ext4: clean up feature test macros with
predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was
not noticed since only very old versions of resize2fs (before
e2fsprogs 1.42) use this ioctl. However, using a new kernel with an
enterprise Linux userspace will cause attempts to use online resize to
fail with "No reserved GDT blocks".
Fixes: e2b911c53584 ("ext4: clean up feature test macros with predicate...")
Cc: [email protected] # v4.4
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: ruippan (潘睿) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1600,7 +1600,7 @@ int ext4_group_add(struct super_block *s
}
if (reserved_gdb || gdb_off == 0) {
- if (ext4_has_feature_resize_inode(sb) ||
+ if (!ext4_has_feature_resize_inode(sb) ||
!le16_to_cpu(es->s_reserved_gdt_blocks)) {
ext4_warning(sb,
"No reserved GDT blocks, can't resize");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1e434b703248580b7aaaf8a115d93e682f57d29f ]
The sw2iso count should cover ARM LDO ramp-up time,
the MAX ARM LDO ramp-up time may be up to more than
100us on some boards, this patch sets sw2iso to 0xf
(~384us) which is the reset value, and it is much
more safe to cover different boards, since we have
observed that some customer boards failed with current
setting of 0x2.
Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Anson Huang <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-imx/cpuidle-imx6sx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 3c6672b3796b..7f5df8992008 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -97,7 +97,7 @@ int __init imx6sx_cpuidle_init(void)
* except for power up sw2iso which need to be
* larger than LDO ramp up time.
*/
- imx_gpc_set_arm_power_up_timing(2, 1);
+ imx_gpc_set_arm_power_up_timing(0xf, 1);
imx_gpc_set_arm_power_down_timing(1, 1);
return cpuidle_register(&imx6sx_cpuidle_driver, NULL);
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Herrmann <[email protected]>
commit 7b55851367136b1efd84d98fea81ba57a98304cf upstream.
This changes the fork(2) syscall to record the process start_time after
initializing the basic task structure but still before making the new
process visible to user-space.
Technically, we could record the start_time anytime during fork(2). But
this might lead to scenarios where a start_time is recorded long before
a process becomes visible to user-space. For instance, with
userfaultfd(2) and TLS, user-space can delay the execution of fork(2)
for an indefinite amount of time (and will, if this causes network
access, or similar).
By recording the start_time late, it much closer reflects the point in
time where the process becomes live and can be observed by other
processes.
Lastly, this makes it much harder for user-space to predict and control
the start_time they get assigned. Previously, user-space could fork a
process and stall it in copy_thread_tls() before its pid is allocated,
but after its start_time is recorded. This can be misused to later-on
cycle through PIDs and resume the stalled fork(2) yielding a process
that has the same pid and start_time as a process that existed before.
This can be used to circumvent security systems that identify processes
by their pid+start_time combination.
Even though user-space was always aware that start_time recording is
flaky (but several projects are known to still rely on start_time-based
identification), changing the start_time to be recorded late will help
mitigate existing attacks and make it much harder for user-space to
control the start_time a process gets assigned.
Reported-by: Jann Horn <[email protected]>
Signed-off-by: Tom Gundersen <[email protected]>
Signed-off-by: David Herrmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/fork.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1411,8 +1411,6 @@ static struct task_struct *copy_process(
posix_cpu_timers_init(p);
- p->start_time = ktime_get_ns();
- p->real_start_time = ktime_get_boot_ns();
p->io_context = NULL;
p->audit_context = NULL;
cgroup_fork(p);
@@ -1573,6 +1571,17 @@ static struct task_struct *copy_process(
goto bad_fork_free_pid;
/*
+ * From this point on we must avoid any synchronous user-space
+ * communication until we take the tasklist-lock. In particular, we do
+ * not want user-space to be able to predict the process start-time by
+ * stalling fork(2) after we recorded the start_time but before it is
+ * visible to the system.
+ */
+
+ p->start_time = ktime_get_ns();
+ p->real_start_time = ktime_get_boot_ns();
+
+ /*
* Make it visible to the rest of the system, but dont wake it up yet.
* Need tasklist lock for parent etc handling!
*/
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominique Martinet <[email protected]>
commit 574d356b7a02c7e1b01a1d9cba8a26b3c2888f45 upstream.
If the requested msize is too small (either from command line argument
or from the server version reply), we won't get any work done.
If it's *really* too small, nothing will work, and this got caught by
syzbot recently (on a new kmem_cache_create_usercopy() call)
Just set a minimum msize to 4k in both code paths, until someone
complains they have a use-case for a smaller msize.
We need to check in both mount option and server reply individually
because the msize for the first version request would be unchecked
with just a global check on clnt->msize.
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: [email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Cc: Eric Van Hensbergen <[email protected]>
Cc: Latchesar Ionkov <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/client.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -156,6 +156,12 @@ static int parse_opts(char *opts, struct
ret = r;
continue;
}
+ if (option < 4096) {
+ p9_debug(P9_DEBUG_ERROR,
+ "msize should be at least 4k\n");
+ ret = -EINVAL;
+ continue;
+ }
clnt->msize = option;
break;
case Opt_trans:
@@ -972,10 +978,18 @@ static int p9_client_version(struct p9_c
else if (!strncmp(version, "9P2000", 6))
c->proto_version = p9_proto_legacy;
else {
+ p9_debug(P9_DEBUG_ERROR,
+ "server returned an unknown version: %s\n", version);
err = -EREMOTEIO;
goto error;
}
+ if (msize < 4096) {
+ p9_debug(P9_DEBUG_ERROR,
+ "server returned a msize < 4096: %d\n", msize);
+ err = -EREMOTEIO;
+ goto error;
+ }
if (msize < c->msize)
c->msize = msize;
@@ -1040,6 +1054,13 @@ struct p9_client *p9_client_create(const
if (clnt->msize > clnt->trans_mod->maxsize)
clnt->msize = clnt->trans_mod->maxsize;
+ if (clnt->msize < 4096) {
+ p9_debug(P9_DEBUG_ERROR,
+ "Please specify a msize of at least 4k\n");
+ err = -EINVAL;
+ goto free_client;
+ }
+
err = p9_client_version(clnt);
if (err)
goto close_trans;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <[email protected]>
commit af097f5d199e2aa3ab3ef777f0716e487b8f7b08 upstream.
Don't build discards bigger than what the user asked for, if the
user decided to limit the size by writing to 'discard_max_bytes'.
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-lib.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -81,8 +81,14 @@ int blkdev_issue_discard(struct block_de
break;
}
- /* Make sure bi_size doesn't overflow */
- req_sects = min_t(sector_t, nr_sects, UINT_MAX >> 9);
+ /*
+ * Issue in chunks of the user defined max discard setting,
+ * ensuring that bi_size doesn't overflow
+ */
+ req_sects = min_t(sector_t, nr_sects,
+ q->limits.max_discard_sectors);
+ if (req_sects > UINT_MAX >> 9)
+ req_sects = UINT_MAX >> 9;
/*
* If splitting a request, and the next starting sector would be
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Peng <[email protected]>
commit cbb2ebf70daf7f7d97d3811a2ff8e39655b8c184 upstream.
In `create_composite_quirk`, the terminating condition of for loops is
`quirk->ifnum < 0`. So any composite quirks should end with `struct
snd_usb_audio_quirk` object with ifnum < 0.
for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
.....
}
the data field of Bower's & Wilkins PX headphones usb device device quirks
do not end with {.ifnum = -1}, wihch may result in out-of-bound read.
This Patch fix the bug by adding an ending quirk object.
Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones")
Signed-off-by: Hui Peng <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks-table.h | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3321,6 +3321,9 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
}
}
},
+ {
+ .ifnum = -1
+ },
}
}
},
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner <[email protected]>
commit e82b0b3828451c1cd331d9f304c6078fcd43b62e upstream.
If a DMA transfer finishes orderly right when spi_transfer_one_message()
determines that it has timed out, the callbacks bcm2835_spi_dma_done()
and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(),
potentially leading to double termination.
Prevent by atomically changing the dma_pending flag before calling
dmaengine_terminate_all().
Signed-off-by: Lukas Wunner <[email protected]>
Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Cc: [email protected] # v4.2+
Cc: Mathias Duckeck <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Martin Sperl <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -233,10 +233,9 @@ static void bcm2835_spi_dma_done(void *d
* is called the tx-dma must have finished - can't get to this
* situation otherwise...
*/
- dmaengine_terminate_all(master->dma_tx);
-
- /* mark as no longer pending */
- bs->dma_pending = 0;
+ if (cmpxchg(&bs->dma_pending, true, false)) {
+ dmaengine_terminate_all(master->dma_tx);
+ }
/* and mark as completed */;
complete(&master->xfer_completion);
@@ -617,10 +616,9 @@ static void bcm2835_spi_handle_err(struc
struct bcm2835_spi *bs = spi_master_get_devdata(master);
/* if an error occurred and we have an active dma, then terminate */
- if (bs->dma_pending) {
+ if (cmpxchg(&bs->dma_pending, true, false)) {
dmaengine_terminate_all(master->dma_tx);
dmaengine_terminate_all(master->dma_rx);
- bs->dma_pending = 0;
}
/* and reset */
bcm2835_spi_reset_hw(master);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 4ecd55ea074217473f94cfee21bb72864d39f8d7 upstream.
After commit d202cce8963d, an expired cache_head can be removed from the
cache_detail's hash.
However, the expired cache_head may be waiting for a reply from a
previously submitted request. Such a cache_head has an increased
refcounter and therefore it won't be freed after cache_put(freeme).
Because the cache_head was removed from the hash it cannot be found
during cache_clean() and can be leaked forever, together with stalled
cache_request and other taken resources.
In our case we noticed it because an entry in the export cache was
holding a reference on a filesystem.
Fixes d202cce8963d ("sunrpc: never return expired entries in sunrpc_cache_lookup")
Cc: Pavel Tikhomirov <[email protected]>
Cc: [email protected] # 2.6.35
Signed-off-by: Vasily Averin <[email protected]>
Reviewed-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/cache.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -54,6 +54,11 @@ static void cache_init(struct cache_head
h->last_refresh = now;
}
+static void cache_fresh_locked(struct cache_head *head, time_t expiry,
+ struct cache_detail *detail);
+static void cache_fresh_unlocked(struct cache_head *head,
+ struct cache_detail *detail);
+
struct cache_head *sunrpc_cache_lookup(struct cache_detail *detail,
struct cache_head *key, int hash)
{
@@ -95,6 +100,7 @@ struct cache_head *sunrpc_cache_lookup(s
if (cache_is_expired(detail, tmp)) {
hlist_del_init(&tmp->cache_list);
detail->entries --;
+ cache_fresh_locked(tmp, 0, detail);
freeme = tmp;
break;
}
@@ -110,8 +116,10 @@ struct cache_head *sunrpc_cache_lookup(s
cache_get(new);
write_unlock(&detail->hash_lock);
- if (freeme)
+ if (freeme) {
+ cache_fresh_unlocked(freeme, detail);
cache_put(freeme, detail);
+ }
return new;
}
EXPORT_SYMBOL_GPL(sunrpc_cache_lookup);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ]
With PM enabled, I noticed that pressing a key on the droid4 keyboard will
block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT
and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as
suggested by Dmitry Torokhov <[email protected]>.
>From the hardware point of view, looks like we need to manage the registers
for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid
blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE
register now gone with IRQF_ONESHOT, also the SoC idle state problem is
gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in
omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent
blocking deeper SoC idle states after rmmod omap4-keypad.
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/omap4-keypad.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index f78c464899db..3d2c60c8de83 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -126,12 +126,8 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
- if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
- /* Disable interrupts */
- kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
- OMAP4_VAL_IRQDISABLE);
+ if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
return IRQ_WAKE_THREAD;
- }
return IRQ_NONE;
}
@@ -173,11 +169,6 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
- /* enable interrupts */
- kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
- OMAP4_DEF_IRQENABLE_EVENTEN |
- OMAP4_DEF_IRQENABLE_LONGKEY);
-
return IRQ_HANDLED;
}
@@ -214,9 +205,10 @@ static void omap4_keypad_close(struct input_dev *input)
disable_irq(keypad_data->irq);
- /* Disable interrupts */
+ /* Disable interrupts and wake-up events */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_VAL_IRQDISABLE);
+ kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
/* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
@@ -364,7 +356,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
}
error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
- omap4_keypad_irq_thread_fn, 0,
+ omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
"omap4-keypad", keypad_data);
if (error) {
dev_err(&pdev->dev, "failed to register interrupt\n");
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f1733a1d3cd32a9492f4cf866be37bb46e10163d ]
There is actually a space after "sp," like this,
ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]!
Right now, checkstack.pl isn't able to print anything on aarch64,
because it won't be able to match the stating objdump line of a function
due to this missing space. Hence, it displays every stack as zero-size.
After this patch, checkpatch.pl is able to match the start of a
function's objdump, and is then able to calculate each function's stack
correctly.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/checkstack.pl | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index dd8397894d5c..12a6940741fe 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -46,8 +46,8 @@ my (@stack, $re, $dre, $x, $xs, $funcre);
$xs = "[0-9a-f ]"; # hex character or space
$funcre = qr/^$x* <(.*)>:$/;
if ($arch eq 'aarch64') {
- #ffffffc0006325cc: a9bb7bfd stp x29, x30, [sp,#-80]!
- $re = qr/^.*stp.*sp,\#-([0-9]{1,8})\]\!/o;
+ #ffffffc0006325cc: a9bb7bfd stp x29, x30, [sp, #-80]!
+ $re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o;
} elsif ($arch eq 'arm') {
#c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5564597d51c8ff5b88d95c76255e18b13b760879 ]
Commit 6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper
as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor
at the start of crt0.S to have a hard-coded start address of 0x500000
rather than a reference to _zimage_start, presumably because having
a reference to a symbol introduced a relocation which is awkward to
handle in a position-independent executable. Unfortunately, what is
at 0x500000 in the COFF image is not the first instruction, but the
procedure descriptor itself, that is, a word containing 0x500000,
which is not a valid instruction. Hence, booting a COFF zImage
results in a "DEFAULT CATCH!, code=FFF00700" message from Open
Firmware.
This fixes the problem by (a) putting the procedure descriptor in the
data section and (b) adding a branch to _zimage_start as the first
instruction in the program.
Fixes: 6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN")
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/crt0.S | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 5c2199857aa8..a3550e8f1a77 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -15,7 +15,7 @@
RELA = 7
RELACOUNT = 0x6ffffff9
- .text
+ .data
/* A procedure descriptor used when booting this as a COFF file.
* When making COFF, this comes first in the link and we're
* linked at 0x500000.
@@ -23,6 +23,8 @@ RELACOUNT = 0x6ffffff9
.globl _zimage_start_opd
_zimage_start_opd:
.long 0x500000, 0, 0, 0
+ .text
+ b _zimage_start
#ifdef __powerpc64__
.balign 8
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vitaly Kuznetsov <[email protected]>
commit d391f1207067268261add0485f0f34503539c5b0 upstream.
I was investigating an issue with seabios >= 1.10 which stopped working
for nested KVM on Hyper-V. The problem appears to be in
handle_ept_violation() function: when we do fast mmio we need to skip
the instruction so we do kvm_skip_emulated_instruction(). This, however,
depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS.
However, this is not the case.
Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when
EPT MISCONFIG occurs. While on real hardware it was observed to be set,
some hypervisors follow the spec and don't set it; we end up advancing
IP with some random value.
I checked with Microsoft and they confirmed they don't fill
VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG.
Fix the issue by doing instruction skip through emulator when running
nested.
Fixes: 68c3b4d1676d870f0453c31d5a52e7e65c7448ae
Suggested-by: Radim Krčmář <[email protected]>
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[mhaboustak: backport to 4.9.y]
Signed-off-by: Mike Haboustak <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 19 +++++++++++++++++--
arch/x86/kvm/x86.c | 3 ++-
2 files changed, 19 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6163,9 +6163,24 @@ static int handle_ept_misconfig(struct k
gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
if (!kvm_io_bus_write(vcpu, KVM_FAST_MMIO_BUS, gpa, 0, NULL)) {
- skip_emulated_instruction(vcpu);
trace_kvm_fast_mmio(gpa);
- return 1;
+ /*
+ * Doing kvm_skip_emulated_instruction() depends on undefined
+ * behavior: Intel's manual doesn't mandate
+ * VM_EXIT_INSTRUCTION_LEN to be set in VMCS when EPT MISCONFIG
+ * occurs and while on real hardware it was observed to be set,
+ * other hypervisors (namely Hyper-V) don't set it, we end up
+ * advancing IP with some random value. Disable fast mmio when
+ * running nested and keep it for real hardware in hope that
+ * VM_EXIT_INSTRUCTION_LEN will always be set correctly.
+ */
+ if (!static_cpu_has(X86_FEATURE_HYPERVISOR)) {
+ skip_emulated_instruction(vcpu);
+ return 1;
+ }
+ else
+ return x86_emulate_instruction(vcpu, gpa, EMULTYPE_SKIP,
+ NULL, 0) == EMULATE_DONE;
}
ret = handle_mmio_page_fault(vcpu, gpa, true);
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5436,7 +5436,8 @@ int x86_emulate_instruction(struct kvm_v
* handle watchpoints yet, those would be handled in
* the emulate_ops.
*/
- if (kvm_vcpu_check_breakpoint(vcpu, &r))
+ if (!(emulation_type & EMULTYPE_SKIP) &&
+ kvm_vcpu_check_breakpoint(vcpu, &r))
return r;
ctxt->interruptibility = 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
commit 32043fa065b51e0b1433e48d118821c71b5cd65d upstream.
Currently the copy_to_user of data in the gentry struct is copying
uninitiaized data in field _pad from the stack to userspace.
Fix this by explicitly memset'ing gentry to zero, this also will zero any
compiler added padding fields that may be in struct (currently there are
none).
Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable")
Fixes: b263b31e8ad6 ("x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Tyler Hicks <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/mtrr/if.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -173,6 +173,8 @@ mtrr_ioctl(struct file *file, unsigned i
struct mtrr_gentry gentry;
void __user *arg = (void __user *) __arg;
+ memset(&gentry, 0, sizeof(gentry));
+
switch (cmd) {
case MTRRIOC_ADD_ENTRY:
case MTRRIOC_SET_ENTRY:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9ae4f8420ed7be4b13c96600e3568c144d101a23 ]
If "interface" is NULL then we can't release it and trying to will only
lead to an Oops.
Fixes: aea71a024914 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index d0b227ffbd5f..573aeec7a02b 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -2279,7 +2279,7 @@ static int _bnx2fc_create(struct net_device *netdev,
if (!interface) {
printk(KERN_ERR PFX "bnx2fc_interface_create failed\n");
rc = -ENOMEM;
- goto ifput_err;
+ goto netdev_err;
}
if (netdev->priv_flags & IFF_802_1Q_VLAN) {
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit e81434995081fd7efb755fd75576b35dbb0850b1 upstream.
____kvm_handle_fault_on_reboot() provides a generic exception fixup
handler that is used to cleanly handle faults on VMX/SVM instructions
during reboot (or at least try to). If there isn't a reboot in
progress, ____kvm_handle_fault_on_reboot() treats any exception as
fatal to KVM and invokes kvm_spurious_fault(), which in turn generates
a BUG() to get a stack trace and die.
When it was originally added by commit 4ecac3fd6dc2 ("KVM: Handle
virtualization instruction #UD faults during reboot"), the "call" to
kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value
is the RIP of the faulting instructing.
The PUSH+JMP trickery is necessary because the exception fixup handler
code lies outside of its associated function, e.g. right after the
function. An actual CALL from the .fixup code would show a slightly
bogus stack trace, e.g. an extra "random" function would be inserted
into the trace, as the return RIP on the stack would point to no known
function (and the unwinder will likely try to guess who owns the RIP).
Unfortunately, the JMP was replaced with a CALL when the macro was
reworked to not spin indefinitely during reboot (commit b7c4145ba2eb
"KVM: Don't spin on virt instruction faults during reboot"). This
causes the aforementioned behavior where a bogus function is inserted
into the stack trace, e.g. my builds like to blame free_kvm_area().
Revert the CALL back to a JMP. The changelog for commit b7c4145ba2eb
("KVM: Don't spin on virt instruction faults during reboot") contains
nothing that indicates the switch to CALL was deliberate. This is
backed up by the fact that the PUSH <insn RIP> was left intact.
Note that an alternative to the PUSH+JMP magic would be to JMP back
to the "real" code and CALL from there, but that would require adding
a JMP in the non-faulting path to avoid calling kvm_spurious_fault()
and would add no value, i.e. the stack trace would be the same.
Using CALL:
------------[ cut here ]------------
kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356!
invalid opcode: 0000 [#1] SMP
CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm]
Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0
R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000
FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0
Call Trace:
free_kvm_area+0x1044/0x43ea [kvm_intel]
? vmx_vcpu_run+0x156/0x630 [kvm_intel]
? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? __set_task_blocked+0x38/0x90
? __set_current_blocked+0x50/0x60
? __fpu__restore_sig+0x97/0x490
? do_vfs_ioctl+0xa1/0x620
? __x64_sys_futex+0x89/0x180
? ksys_ioctl+0x66/0x70
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x4f/0x100
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc
---[ end trace 9775b14b123b1713 ]---
Using JMP:
------------[ cut here ]------------
kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356!
invalid opcode: 0000 [#1] SMP
CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm]
Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0
R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40
FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0
Call Trace:
vmx_vcpu_run+0x156/0x630 [kvm_intel]
? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? kvm_vcpu_ioctl+0x368/0x5c0 [kvm]
? __set_task_blocked+0x38/0x90
? __set_current_blocked+0x50/0x60
? __fpu__restore_sig+0x97/0x490
? do_vfs_ioctl+0xa1/0x620
? __x64_sys_futex+0x89/0x180
? ksys_ioctl+0x66/0x70
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x4f/0x100
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc
---[ end trace f9daedb85ab3ddba ]---
Fixes: b7c4145ba2eb ("KVM: Don't spin on virt instruction faults during reboot")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1200,7 +1200,7 @@ asmlinkage void kvm_spurious_fault(void)
"cmpb $0, kvm_rebooting \n\t" \
"jne 668b \n\t" \
__ASM_SIZE(push) " $666b \n\t" \
- "call kvm_spurious_fault \n\t" \
+ "jmp kvm_spurious_fault \n\t" \
".popsection \n\t" \
_ASM_EXTABLE(666b, 667b)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Georgy A Bystrenin <[email protected]>
commit 9a596f5b39593414c0ec80f71b94a226286f084e upstream.
While resolving a bug with locks on samba shares found a strange behavior.
When a file locked by one node and we trying to lock it from another node
it fail with errno 5 (EIO) but in that case errno must be set to
(EACCES | EAGAIN).
This isn't happening when we try to lock file second time on same node.
In this case it returns EACCES as expected.
Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in
mount options).
Further investigation showed that the mapping from status_to_posix_error
is different for SMB1 and SMB2+ implementations.
For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock]
(See fs/cifs/netmisc.c line 66)
but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO]
(see fs/cifs/smb2maperror.c line 383)
Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue.
BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971
Signed-off-by: Georgy A Bystrenin <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2maperror.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/cifs/smb2maperror.c
+++ b/fs/cifs/smb2maperror.c
@@ -377,8 +377,8 @@ static const struct status_to_posix_erro
{STATUS_NONEXISTENT_EA_ENTRY, -EIO, "STATUS_NONEXISTENT_EA_ENTRY"},
{STATUS_NO_EAS_ON_FILE, -ENODATA, "STATUS_NO_EAS_ON_FILE"},
{STATUS_EA_CORRUPT_ERROR, -EIO, "STATUS_EA_CORRUPT_ERROR"},
- {STATUS_FILE_LOCK_CONFLICT, -EIO, "STATUS_FILE_LOCK_CONFLICT"},
- {STATUS_LOCK_NOT_GRANTED, -EIO, "STATUS_LOCK_NOT_GRANTED"},
+ {STATUS_FILE_LOCK_CONFLICT, -EACCES, "STATUS_FILE_LOCK_CONFLICT"},
+ {STATUS_LOCK_NOT_GRANTED, -EACCES, "STATUS_LOCK_NOT_GRANTED"},
{STATUS_DELETE_PENDING, -ENOENT, "STATUS_DELETE_PENDING"},
{STATUS_CTL_FILE_NOT_SUPPORTED, -ENOSYS,
"STATUS_CTL_FILE_NOT_SUPPORTED"},
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit abf221d2f51b8ce7b9959a8953f880a8b0a1400d upstream.
spi_read() and spi_write() require DMA-safe memory. When
CONFIG_VMAP_STACK is selected, those functions cannot be used
with buffers on stack.
This patch replaces calls to spi_read() and spi_write() by
spi_write_then_read() which doesn't require DMA-safe buffers.
Fixes: 0c36ec314735 ("gpio: gpio driver for max7301 SPI GPIO expander")
Cc: <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-max7301.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
--- a/drivers/gpio/gpio-max7301.c
+++ b/drivers/gpio/gpio-max7301.c
@@ -25,7 +25,7 @@ static int max7301_spi_write(struct devi
struct spi_device *spi = to_spi_device(dev);
u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
- return spi_write(spi, (const u8 *)&word, sizeof(word));
+ return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
}
/* A read from the MAX7301 means two transfers; here, one message each */
@@ -37,14 +37,8 @@ static int max7301_spi_read(struct devic
struct spi_device *spi = to_spi_device(dev);
word = 0x8000 | (reg << 8);
- ret = spi_write(spi, (const u8 *)&word, sizeof(word));
- if (ret)
- return ret;
- /*
- * This relies on the fact, that a transfer with NULL tx_buf shifts out
- * zero bytes (=NOOP for MAX7301)
- */
- ret = spi_read(spi, (u8 *)&word, sizeof(word));
+ ret = spi_write_then_read(spi, &word, sizeof(word), &word,
+ sizeof(word));
if (ret)
return ret;
return word & 0xff;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit 841df922417eb82c835e93d4b93eb6a68c99d599 ]
We miss a write barrier that guarantees used idx is updated and seen
before log. This will let userspace sync and copy used ring before
used idx is update. Fix this by adding a barrier before log_write().
Fixes: 8dd014adfea6f ("vhost-net: mergeable buffers support")
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/vhost.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1550,6 +1550,8 @@ int vhost_add_used_n(struct vhost_virtqu
return -EFAULT;
}
if (unlikely(vq->log_used)) {
+ /* Make sure used idx is seen before log. */
+ smp_wmb();
/* Log used index update. */
log_write(vq->log_base,
vq->log_addr + offsetof(struct vring_used, idx),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 505b5240329b922f21f91d5b5d1e535c805eca6d upstream.
nr is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r]
drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap)
drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap)
Fix this by sanitizing nr before using it to index dev->driver->ioctls
and drm_ioctls.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_ioctl.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -36,6 +36,7 @@
#include <linux/pci.h>
#include <linux/export.h>
+#include <linux/nospec.h>
static int drm_version(struct drm_device *dev, void *data,
struct drm_file *file_priv);
@@ -702,13 +703,17 @@ long drm_ioctl(struct file *filp,
if (is_driver_ioctl) {
/* driver ioctl */
- if (nr - DRM_COMMAND_BASE >= dev->driver->num_ioctls)
+ unsigned int index = nr - DRM_COMMAND_BASE;
+
+ if (index >= dev->driver->num_ioctls)
goto err_i1;
- ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
+ index = array_index_nospec(index, dev->driver->num_ioctls);
+ ioctl = &dev->driver->ioctls[index];
} else {
/* core ioctl */
if (nr >= DRM_CORE_IOCTL_COUNT)
goto err_i1;
+ nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
ioctl = &drm_ioctls[nr];
}
@@ -810,6 +815,7 @@ bool drm_ioctl_flags(unsigned int nr, un
if (nr >= DRM_CORE_IOCTL_COUNT)
return false;
+ nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
*flags = drm_ioctls[nr].flags;
return true;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jia-Ju Bai <[email protected]>
commit c85400f886e3d41e69966470879f635a2b50084c upstream.
The function r8a66597_endpoint_disable() and r8a66597_urb_enqueue() may
be concurrently executed.
The two functions both access a possible shared variable "hep->hcpriv".
This shared variable is freed by r8a66597_endpoint_disable() via the
call path:
r8a66597_endpoint_disable
kfree(hep->hcpriv) (line 1995 in Linux-4.19)
This variable is read by r8a66597_urb_enqueue() via the call path:
r8a66597_urb_enqueue
spin_lock_irqsave(&r8a66597->lock)
init_pipe_info
enable_r8a66597_pipe
pipe = hep->hcpriv (line 802 in Linux-4.19)
The read operation is protected by a spinlock, but the free operation
is not protected by this spinlock, thus a concurrency use-after-free bug
may occur.
To fix this bug, the spin-lock and spin-unlock function calls in
r8a66597_endpoint_disable() are moved to protect the free operation.
Signed-off-by: Jia-Ju Bai <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/r8a66597-hcd.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1990,6 +1990,8 @@ static int r8a66597_urb_dequeue(struct u
static void r8a66597_endpoint_disable(struct usb_hcd *hcd,
struct usb_host_endpoint *hep)
+__acquires(r8a66597->lock)
+__releases(r8a66597->lock)
{
struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv;
@@ -2002,13 +2004,14 @@ static void r8a66597_endpoint_disable(st
return;
pipenum = pipe->info.pipenum;
+ spin_lock_irqsave(&r8a66597->lock, flags);
if (pipenum == 0) {
kfree(hep->hcpriv);
hep->hcpriv = NULL;
+ spin_unlock_irqrestore(&r8a66597->lock, flags);
return;
}
- spin_lock_irqsave(&r8a66597->lock, flags);
pipe_stop(r8a66597, pipe);
pipe_irq_disable(r8a66597, pipenum);
disable_irq_empty(r8a66597, pipenum);
On Fri, Jan 11 2019 at 9:08am -0500,
Greg Kroah-Hartman <[email protected]> wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Ming Lei <[email protected]>
>
> commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
Hi Greg,
Please also pick up this commit:
89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
impose device limits on bios")
Thanks,
Mike
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 4a2eb0c37b4759416996fbb4c45b932500cf06d3 ]
syzbot reported a kernel-infoleak, which is caused by an uninitialized
field(sin6_flowinfo) of addr->a.v6 in sctp_inet6addr_event().
The call trace is as below:
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x19a/0x230 lib/usercopy.c:33
CPU: 1 PID: 8164 Comm: syz-executor2 Not tainted 4.20.0-rc3+ #95
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x32d/0x480 lib/dump_stack.c:113
kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
_copy_to_user+0x19a/0x230 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:183 [inline]
sctp_getsockopt_local_addrs net/sctp/socket.c:5998 [inline]
sctp_getsockopt+0x15248/0x186f0 net/sctp/socket.c:7477
sock_common_getsockopt+0x13f/0x180 net/core/sock.c:2937
__sys_getsockopt+0x489/0x550 net/socket.c:1939
__do_sys_getsockopt net/socket.c:1950 [inline]
__se_sys_getsockopt+0xe1/0x100 net/socket.c:1947
__x64_sys_getsockopt+0x62/0x80 net/socket.c:1947
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
sin6_flowinfo is not really used by SCTP, so it will be fixed by simply
setting it to 0.
The issue exists since very beginning.
Thanks Alexander for the reproducer provided.
Reported-by: [email protected]
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/ipv6.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -101,6 +101,7 @@ static int sctp_inet6addr_event(struct n
if (addr) {
addr->a.v6.sin6_family = AF_INET6;
addr->a.v6.sin6_port = 0;
+ addr->a.v6.sin6_flowinfo = 0;
addr->a.v6.sin6_addr = ifa->addr;
addr->a.v6.sin6_scope_id = ifa->idev->dev->ifindex;
addr->valid = 1;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 5ae4f61f012a097df93de2285070ec8e34716d29 upstream.
ipcm->substream is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/pci/emu10k1/emufx.c:1031 snd_emu10k1_ipcm_poke() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap)
sound/pci/emu10k1/emufx.c:1075 snd_emu10k1_ipcm_peek() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap)
Fix this by sanitizing ipcm->substream before using it to index emu->fx8010.pcm
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/emu10k1/emufx.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -36,6 +36,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/moduleparam.h>
+#include <linux/nospec.h>
#include <sound/core.h>
#include <sound/tlv.h>
@@ -1000,6 +1001,8 @@ static int snd_emu10k1_ipcm_poke(struct
if (ipcm->substream >= EMU10K1_FX8010_PCM_COUNT)
return -EINVAL;
+ ipcm->substream = array_index_nospec(ipcm->substream,
+ EMU10K1_FX8010_PCM_COUNT);
if (ipcm->channels > 32)
return -EINVAL;
pcm = &emu->fx8010.pcm[ipcm->substream];
@@ -1046,6 +1049,8 @@ static int snd_emu10k1_ipcm_peek(struct
if (ipcm->substream >= EMU10K1_FX8010_PCM_COUNT)
return -EINVAL;
+ ipcm->substream = array_index_nospec(ipcm->substream,
+ EMU10K1_FX8010_PCM_COUNT);
pcm = &emu->fx8010.pcm[ipcm->substream];
mutex_lock(&emu->fx8010.lock);
spin_lock_irq(&emu->reg_lock);
On Fri, Jan 11 2019 at 9:25am -0500,
Mike Snitzer <[email protected]> wrote:
> On Fri, Jan 11 2019 at 9:08am -0500,
> Greg Kroah-Hartman <[email protected]> wrote:
>
> > 4.4-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Ming Lei <[email protected]>
> >
> > commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
>
> Hi Greg,
>
> Please also pick up this commit:
> 89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
> impose device limits on bios")
>
> Thanks,
> Mike
But.. looking closer, since you're backporting to 4.4, to even have DM
be able to use bio_split() you'll need these 3 commits too:
18a25da84354c6bb655320de6072c00eda6eb602 ("dm: ensure bio submission follows a depth-first tree walk")
8dd601fa8317243be887458c49f6c29c2f3d719f ("dm: correctly handle chained bios in dec_pending()")
f21c601a2bb319ec19eb4562eadc7797d90fd90e ("dm: use bio_split() when splitting out the already processed bio")
Mike
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sohil Mehta <[email protected]>
commit 3569dd07aaad71920c5ea4da2d5cc9a167c1ffd4 upstream.
The Intel IOMMU driver opportunistically skips a few top level page
tables from the domain paging directory while programming the IOMMU
context entry. However there is an implicit assumption in the code that
domain's adjusted guest address width (agaw) would always be greater
than IOMMU's agaw.
The IOMMU capabilities in an upcoming platform cause the domain's agaw
to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports
both 4-level and 5-level paging. The domain builds a 4-level page table
based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In
this case the code incorrectly tries to skip page page table levels.
This causes the IOMMU driver to avoid programming the context entry. The
fix handles this case and programs the context entry accordingly.
Fixes: de24e55395698 ("iommu/vt-d: Simplify domain_context_mapping_one")
Cc: <[email protected]>
Cc: Ashok Raj <[email protected]>
Cc: Jacob Pan <[email protected]>
Cc: Lu Baolu <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Reported-by: Ramos Falcon, Ernesto R <[email protected]>
Tested-by: Ricardo Neri <[email protected]>
Signed-off-by: Sohil Mehta <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/intel-iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2041,7 +2041,7 @@ static int domain_context_mapping_one(st
* than default. Unnecessary for PT mode.
*/
if (translation != CONTEXT_TT_PASS_THROUGH) {
- for (agaw = domain->agaw; agaw != iommu->agaw; agaw--) {
+ for (agaw = domain->agaw; agaw > iommu->agaw; agaw--) {
ret = -ENOMEM;
pgd = phys_to_virt(dma_pte_addr(pgd));
if (!dma_pte_present(pgd))
@@ -2055,7 +2055,7 @@ static int domain_context_mapping_one(st
translation = CONTEXT_TT_MULTI_LEVEL;
context_set_address_root(context, virt_to_phys(pgd));
- context_set_address_width(context, iommu->agaw);
+ context_set_address_width(context, agaw);
} else {
/*
* In pass through mode, AW must be programmed to
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit c433570458e49bccea5c551df628d058b3526289 ]
There are multiple issues here:
1. After freeing dev->ax25_ptr, we need to set it to NULL otherwise
we may use a dangling pointer.
2. There is a race between ax25_setsockopt() and device notifier as
reported by syzbot. Close it by holding RTNL lock.
3. We need to test if dev->ax25_ptr is NULL before using it.
Reported-and-tested-by: [email protected]
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ax25/af_ax25.c | 11 +++++++++--
net/ax25/ax25_dev.c | 2 ++
2 files changed, 11 insertions(+), 2 deletions(-)
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -654,15 +654,22 @@ static int ax25_setsockopt(struct socket
break;
}
- dev = dev_get_by_name(&init_net, devname);
+ rtnl_lock();
+ dev = __dev_get_by_name(&init_net, devname);
if (!dev) {
+ rtnl_unlock();
res = -ENODEV;
break;
}
ax25->ax25_dev = ax25_dev_ax25dev(dev);
+ if (!ax25->ax25_dev) {
+ rtnl_unlock();
+ res = -ENODEV;
+ break;
+ }
ax25_fillin_cb(ax25, ax25->ax25_dev);
- dev_put(dev);
+ rtnl_unlock();
break;
default:
--- a/net/ax25/ax25_dev.c
+++ b/net/ax25/ax25_dev.c
@@ -116,6 +116,7 @@ void ax25_dev_device_down(struct net_dev
if ((s = ax25_dev_list) == ax25_dev) {
ax25_dev_list = s->next;
spin_unlock_bh(&ax25_dev_lock);
+ dev->ax25_ptr = NULL;
dev_put(dev);
kfree(ax25_dev);
return;
@@ -125,6 +126,7 @@ void ax25_dev_device_down(struct net_dev
if (s->next == ax25_dev) {
s->next = ax25_dev->next;
spin_unlock_bh(&ax25_dev_lock);
+ dev->ax25_ptr = NULL;
dev_put(dev);
kfree(ax25_dev);
return;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Peng <[email protected]>
commit 5146f95df782b0ac61abde36567e718692725c89 upstream.
The function hso_probe reads if_num from the USB device (as an u8) and uses
it without a length check to index an array, resulting in an OOB memory read
in hso_probe or hso_get_config_data.
Add a length check for both locations and updated hso_probe to bail on
error.
This issue has been assigned CVE-2018-19985.
Reported-by: Hui Peng <[email protected]>
Reported-by: Mathias Payer <[email protected]>
Signed-off-by: Hui Peng <[email protected]>
Signed-off-by: Mathias Payer <[email protected]>
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/hso.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2825,6 +2825,12 @@ static int hso_get_config_data(struct us
return -EIO;
}
+ /* check if we have a valid interface */
+ if (if_num > 16) {
+ kfree(config_data);
+ return -EINVAL;
+ }
+
switch (config_data[if_num]) {
case 0x0:
result = 0;
@@ -2895,10 +2901,18 @@ static int hso_probe(struct usb_interfac
/* Get the interface/port specification from either driver_info or from
* the device itself */
- if (id->driver_info)
+ if (id->driver_info) {
+ /* if_num is controlled by the device, driver_info is a 0 terminated
+ * array. Make sure, the access is in bounds! */
+ for (i = 0; i <= if_num; ++i)
+ if (((u32 *)(id->driver_info))[i] == 0)
+ goto exit;
port_spec = ((u32 *)(id->driver_info))[if_num];
- else
+ } else {
port_spec = hso_get_config_data(interface);
+ if (port_spec < 0)
+ goto exit;
+ }
/* Check if we need to switch to alt interfaces prior to port
* configuration */
On Fri, Jan 11, 2019 at 10:06:05AM -0500, Mike Snitzer wrote:
> On Fri, Jan 11 2019 at 9:35am -0500,
> Greg Kroah-Hartman <[email protected]> wrote:
>
> > On Fri, Jan 11, 2019 at 09:25:39AM -0500, Mike Snitzer wrote:
> > > On Fri, Jan 11 2019 at 9:08am -0500,
> > > Greg Kroah-Hartman <[email protected]> wrote:
> > >
> > > > 4.4-stable review patch. If anyone has any objections, please let me know.
> > > >
> > > > ------------------
> > > >
> > > > From: Ming Lei <[email protected]>
> > > >
> > > > commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
> > >
> > > Hi Greg,
> > >
> > > Please also pick up this commit:
> > > 89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
> > > impose device limits on bios")
> >
> > That's going to be hard as the dependancy for that patch is not here in
> > 4.4.y, and this patch itself isn't even in anything older than 4.19.y.
>
> Right, I quickly replied to this thread with followup of the 3 prereq
> patches needed to get 89f5fa47476 to apply.
>
> > So why add it here to 4.4.y only?
>
> Because you're looking to pull in a commit into 4.4 that causes problems
> elsewhere.
>
> > Can you send the needed patch series to the stable@ mailing list for the
> > different stable trees if this needs to get into them?
>
> I'll try to get to that, but it is low priority for me. And in the
> meantime.. DM will be broken in 4.4 if you take 744889b7cb.. wheeeee.
Ok, then I should drop this patch from 4.4, I can do that. Looks like
it's not in 4.9 either, so that's another good reason to not take it
here as well.
Any objection to just dropping it?
thanks,
greg k-h
On Fri, Jan 11 2019 at 10:17am -0500,
Greg Kroah-Hartman <[email protected]> wrote:
> On Fri, Jan 11, 2019 at 10:06:05AM -0500, Mike Snitzer wrote:
> > On Fri, Jan 11 2019 at 9:35am -0500,
> > Greg Kroah-Hartman <[email protected]> wrote:
> >
> > > On Fri, Jan 11, 2019 at 09:25:39AM -0500, Mike Snitzer wrote:
> > > > On Fri, Jan 11 2019 at 9:08am -0500,
> > > > Greg Kroah-Hartman <[email protected]> wrote:
> > > >
> > > > > 4.4-stable review patch. If anyone has any objections, please let me know.
> > > > >
> > > > > ------------------
> > > > >
> > > > > From: Ming Lei <[email protected]>
> > > > >
> > > > > commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
> > > >
> > > > Hi Greg,
> > > >
> > > > Please also pick up this commit:
> > > > 89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
> > > > impose device limits on bios")
> > >
> > > That's going to be hard as the dependancy for that patch is not here in
> > > 4.4.y, and this patch itself isn't even in anything older than 4.19.y.
> >
> > Right, I quickly replied to this thread with followup of the 3 prereq
> > patches needed to get 89f5fa47476 to apply.
> >
> > > So why add it here to 4.4.y only?
> >
> > Because you're looking to pull in a commit into 4.4 that causes problems
> > elsewhere.
> >
> > > Can you send the needed patch series to the stable@ mailing list for the
> > > different stable trees if this needs to get into them?
> >
> > I'll try to get to that, but it is low priority for me. And in the
> > meantime.. DM will be broken in 4.4 if you take 744889b7cb.. wheeeee.
>
> Ok, then I should drop this patch from 4.4, I can do that. Looks like
> it's not in 4.9 either, so that's another good reason to not take it
> here as well.
>
> Any objection to just dropping it?
I'd prefer that for sure. I don't think the empty discard issue that
commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 addresses is worth the
other DM breakage. But I'm biased ;)
Mike
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jörgen Storvist <[email protected]>
commit 70a7444c550a75584ffcfae95267058817eff6a7 upstream.
Added USB serial option driver support for GosunCn ZTE WeLink ME3630
series cellular modules for USB modes ECM/NCM and MBIM.
usb-devices output MBIM mode:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0602 Rev=03.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
usb-devices output ECM/NCM mode:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1476 Rev=03.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
Signed-off-by: Jörgen Storvist <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1327,6 +1327,7 @@ static const struct usb_device_id option
.driver_info = RSVD(4) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) }, /* GosunCn ZTE WeLink ME3630 (MBIM mode) */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
.driver_info = RSVD(4) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
@@ -1530,6 +1531,7 @@ static const struct usb_device_id option
.driver_info = RSVD(2) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */
.driver_info = RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 7314f5480f3e37e570104dc5e0f28823ef849e72 ]
nr_find_socket(), nr_find_peer() and nr_find_listener() lock the
sock after finding it in the global list. However, the call path
requires BH disabled for the sock lock consistently.
Actually the locking is unnecessary at this point, we can just hold
the sock refcnt to make sure it is not gone after we unlock the global
list, and lock it later only when needed.
Reported-and-tested-by: [email protected]
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netrom/af_netrom.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -153,7 +153,7 @@ static struct sock *nr_find_listener(ax2
sk_for_each(s, &nr_list)
if (!ax25cmp(&nr_sk(s)->source_addr, addr) &&
s->sk_state == TCP_LISTEN) {
- bh_lock_sock(s);
+ sock_hold(s);
goto found;
}
s = NULL;
@@ -174,7 +174,7 @@ static struct sock *nr_find_socket(unsig
struct nr_sock *nr = nr_sk(s);
if (nr->my_index == index && nr->my_id == id) {
- bh_lock_sock(s);
+ sock_hold(s);
goto found;
}
}
@@ -198,7 +198,7 @@ static struct sock *nr_find_peer(unsigne
if (nr->your_index == index && nr->your_id == id &&
!ax25cmp(&nr->dest_addr, dest)) {
- bh_lock_sock(s);
+ sock_hold(s);
goto found;
}
}
@@ -224,7 +224,7 @@ static unsigned short nr_find_next_circu
if (i != 0 && j != 0) {
if ((sk=nr_find_socket(i, j)) == NULL)
break;
- bh_unlock_sock(sk);
+ sock_put(sk);
}
id++;
@@ -918,6 +918,7 @@ int nr_rx_frame(struct sk_buff *skb, str
}
if (sk != NULL) {
+ bh_lock_sock(sk);
skb_reset_transport_header(skb);
if (frametype == NR_CONNACK && skb->len == 22)
@@ -927,6 +928,7 @@ int nr_rx_frame(struct sk_buff *skb, str
ret = nr_process_rx_frame(sk, skb);
bh_unlock_sock(sk);
+ sock_put(sk);
return ret;
}
@@ -958,10 +960,12 @@ int nr_rx_frame(struct sk_buff *skb, str
(make = nr_make_new(sk)) == NULL) {
nr_transmit_refusal(skb, 0);
if (sk)
- bh_unlock_sock(sk);
+ sock_put(sk);
return 0;
}
+ bh_lock_sock(sk);
+
window = skb->data[20];
skb->sk = make;
@@ -1014,6 +1018,7 @@ int nr_rx_frame(struct sk_buff *skb, str
sk->sk_data_ready(sk);
bh_unlock_sock(sk);
+ sock_put(sk);
nr_insert_socket(make);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jörgen Storvist <[email protected]>
commit 28a86092b1753b802ef7e3de8a4c4a69a9c1bb03 upstream.
Added USB serial option driver support for Telit LN940 series cellular
modules. Covering both QMI and MBIM modes.
usb-devices output (0x1900):
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1900 Rev=03.10
S: Manufacturer=Telit
S: Product=Telit LN940 Mobile Broadband
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
usb-devices output (0x1901):
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1901 Rev=03.10
S: Manufacturer=Telit
S: Product=Telit LN940 Mobile Broadband
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
Signed-off-by: Jörgen Storvist <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1163,6 +1163,10 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x1900), /* Telit LN940 (QMI) */
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
+ .driver_info = NCTRL(0) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit d63967e475ae10f286dbd35e189cb241e0b1f284 ]
Since capi_ioctl() copies 64 bytes after calling
capi20_get_manufacturer() we need to ensure to not leak
information to user.
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 0 PID: 11245 Comm: syz-executor633 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
kmsan_internal_check_memory+0x9d4/0xb00 mm/kmsan/kmsan.c:704
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
capi_ioctl include/linux/uaccess.h:177 [inline]
capi_unlocked_ioctl+0x1a0b/0x1bf0 drivers/isdn/capi/capi.c:939
do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46
ksys_ioctl fs/ioctl.c:713 [inline]
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl+0x1da/0x270 fs/ioctl.c:718
__x64_sys_ioctl+0x4a/0x70 fs/ioctl.c:718
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440019
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdd4659fb8 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440019
RDX: 0000000020000080 RSI: 00000000c0044306 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000213 R12: 00000000004018a0
R13: 0000000000401930 R14: 0000000000000000 R15: 0000000000000000
Local variable description: ----data.i@capi_unlocked_ioctl
Variable was created at:
capi_ioctl drivers/isdn/capi/capi.c:747 [inline]
capi_unlocked_ioctl+0x82/0x1bf0 drivers/isdn/capi/capi.c:939
do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46
Bytes 12-63 of 64 are uninitialized
Memory access of size 64 starts at ffff88807ac5fce8
Data copied to user address 0000000020000080
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Karsten Keil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/capi/kcapi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -851,7 +851,7 @@ u16 capi20_get_manufacturer(u32 contr, u
u16 ret;
if (contr == 0) {
- strlcpy(buf, capi_manufakturer, CAPI_MANUFACTURER_LEN);
+ strncpy(buf, capi_manufakturer, CAPI_MANUFACTURER_LEN);
return CAPI_NOERROR;
}
@@ -859,7 +859,7 @@ u16 capi20_get_manufacturer(u32 contr, u
ctr = get_capi_ctr_by_nr(contr);
if (ctr && ctr->state == CAPI_CTR_RUNNING) {
- strlcpy(buf, ctr->manu, CAPI_MANUFACTURER_LEN);
+ strncpy(buf, ctr->manu, CAPI_MANUFACTURER_LEN);
ret = CAPI_NOERROR;
} else
ret = CAPI_REGNOTINSTALLED;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Willem de Bruijn <[email protected]>
[ Upstream commit 99137b7888f4058087895d035d81c6b2d31015c5 ]
Packet sockets with SOCK_DGRAM may pass an address for use in
dev_hard_header. Ensure that it is of sufficient length.
Reported-by: syzbot <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2513,6 +2513,8 @@ static int tpacket_snd(struct packet_soc
proto = saddr->sll_protocol;
addr = saddr->sll_addr;
dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex);
+ if (addr && dev && saddr->sll_halen < dev->addr_len)
+ goto out;
}
err = -ENXIO;
@@ -2680,6 +2682,8 @@ static int packet_snd(struct socket *soc
proto = saddr->sll_protocol;
addr = saddr->sll_addr;
dev = dev_get_by_index(sock_net(sk), saddr->sll_ifindex);
+ if (addr && dev && saddr->sll_halen < dev->addr_len)
+ goto out;
}
err = -ENXIO;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Willem de Bruijn <[email protected]>
[ Upstream commit 6b8d95f1795c42161dc0984b6863e95d6acf24ed ]
Validate packet socket address length if a length is given. Zero
length is equivalent to not setting an address.
Fixes: 99137b7888f4 ("packet: validate address length")
Reported-by: Ido Schimmel <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2511,7 +2511,7 @@ static int tpacket_snd(struct packet_soc
sll_addr)))
goto out;
proto = saddr->sll_protocol;
- addr = saddr->sll_addr;
+ addr = saddr->sll_halen ? saddr->sll_addr : NULL;
dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex);
if (addr && dev && saddr->sll_halen < dev->addr_len)
goto out;
@@ -2680,7 +2680,7 @@ static int packet_snd(struct socket *soc
if (msg->msg_namelen < (saddr->sll_halen + offsetof(struct sockaddr_ll, sll_addr)))
goto out;
proto = saddr->sll_protocol;
- addr = saddr->sll_addr;
+ addr = saddr->sll_halen ? saddr->sll_addr : NULL;
dev = dev_get_by_index(sock_net(sk), saddr->sll_ifindex);
if (addr && dev && saddr->sll_halen < dev->addr_len)
goto out;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 4aea96f4237cea0c51a8bc87c0db31f0f932f1f0 upstream.
info.mode and info.port are indirectly controlled by user-space,
hence leading to a potential exploitation of the Spectre variant 1
vulnerability.
These issues were detected with the help of Smatch:
sound/synth/emux/emux_hwdep.c:72 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs[i]->ctrls' [w] (local cap)
sound/synth/emux/emux_hwdep.c:75 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs' [w] (local cap)
sound/synth/emux/emux_hwdep.c:75 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs[info.port]->ctrls' [w] (local cap)
Fix this by sanitizing both info.mode and info.port before using them
to index emu->portptrs[i]->ctrls, emu->portptrs[info.port]->ctrls and
emu->portptrs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Cc: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/synth/emux/emux_hwdep.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/sound/synth/emux/emux_hwdep.c
+++ b/sound/synth/emux/emux_hwdep.c
@@ -22,9 +22,9 @@
#include <sound/core.h>
#include <sound/hwdep.h>
#include <linux/uaccess.h>
+#include <linux/nospec.h>
#include "emux_voice.h"
-
#define TMP_CLIENT_ID 0x1001
/*
@@ -66,13 +66,16 @@ snd_emux_hwdep_misc_mode(struct snd_emux
return -EFAULT;
if (info.mode < 0 || info.mode >= EMUX_MD_END)
return -EINVAL;
+ info.mode = array_index_nospec(info.mode, EMUX_MD_END);
if (info.port < 0) {
for (i = 0; i < emu->num_ports; i++)
emu->portptrs[i]->ctrls[info.mode] = info.value;
} else {
- if (info.port < emu->num_ports)
+ if (info.port < emu->num_ports) {
+ info.port = array_index_nospec(info.port, emu->num_ports);
emu->portptrs[info.port]->ctrls[info.mode] = info.value;
+ }
}
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mantas Mikulėnas <[email protected]>
commit 40906ebe3af6a48457151b3c6726b480f6a6cb13 upstream.
Tested with 4.19.9.
v2: Changed from CXT_FIXUP_MUTE_LED_GPIO to CXT_FIXUP_HP_DOCK because
that's what the existing fixups for EliteBooks use.
Signed-off-by: Mantas Mikulėnas <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_conexant.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -853,6 +853,7 @@ static const struct snd_pci_quirk cxt506
SND_PCI_QUIRK(0x103c, 0x8079, "HP EliteBook 840 G3", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x807C, "HP EliteBook 820 G3", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x80FD, "HP ProBook 640 G2", CXT_FIXUP_HP_DOCK),
+ SND_PCI_QUIRK(0x103c, 0x828c, "HP EliteBook 840 G4", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x83b3, "HP EliteBook 830 G5", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x83d3, "HP ProBook 640 G4", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 8e1da73acded4751a93d4166458a7e640f37d26c ]
Add napi_disable routine in gro_cells_destroy since starting from
commit c42858eaf492 ("gro_cells: remove spinlock protecting receive
queues") gro_cell_poll and gro_cells_destroy can run concurrently on
napi_skbs list producing a kernel Oops if the tunnel interface is
removed while gro_cell_poll is running. The following Oops has been
triggered removing a vxlan device while the interface is receiving
traffic
[ 5628.948853] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 5628.949981] PGD 0 P4D 0
[ 5628.950308] Oops: 0002 [#1] SMP PTI
[ 5628.950748] CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.20.0-rc6+ #41
[ 5628.952940] RIP: 0010:gro_cell_poll+0x49/0x80
[ 5628.955615] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202
[ 5628.956250] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000
[ 5628.957102] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150
[ 5628.957940] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000
[ 5628.958803] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040
[ 5628.959661] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040
[ 5628.960682] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000
[ 5628.961616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5628.962359] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0
[ 5628.963188] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5628.964034] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5628.964871] Call Trace:
[ 5628.965179] net_rx_action+0xf0/0x380
[ 5628.965637] __do_softirq+0xc7/0x431
[ 5628.966510] run_ksoftirqd+0x24/0x30
[ 5628.966957] smpboot_thread_fn+0xc5/0x160
[ 5628.967436] kthread+0x113/0x130
[ 5628.968283] ret_from_fork+0x3a/0x50
[ 5628.968721] Modules linked in:
[ 5628.969099] CR2: 0000000000000008
[ 5628.969510] ---[ end trace 9d9dedc7181661fe ]---
[ 5628.970073] RIP: 0010:gro_cell_poll+0x49/0x80
[ 5628.972965] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202
[ 5628.973611] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000
[ 5628.974504] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150
[ 5628.975462] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000
[ 5628.976413] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040
[ 5628.977375] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040
[ 5628.978296] FS: 0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000
[ 5628.979327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5628.980044] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0
[ 5628.980929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5628.981736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5628.982409] Kernel panic - not syncing: Fatal exception in interrupt
[ 5628.983307] Kernel Offset: disabled
Fixes: c42858eaf492 ("gro_cells: remove spinlock protecting receive queues")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/gro_cells.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/net/gro_cells.h
+++ b/include/net/gro_cells.h
@@ -84,6 +84,7 @@ static inline void gro_cells_destroy(str
for_each_possible_cpu(i) {
struct gro_cell *cell = per_cpu_ptr(gcells->cells, i);
+ napi_disable(&cell->napi);
netif_napi_del(&cell->napi);
__skb_queue_purge(&cell->napi_skbs);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit 11a64a05dc649815670b1be9fe63d205cb076401 upstream.
Depending on which functions are inlined in util/pmu.c, the snprintf()
calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a
warning:
util/pmu.c: In function 'pmu_aliases':
util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
snprintf(path, PATH_MAX, "%s/%s.unit", dir, name);
^~
I found this when trying to build perf from Linux 3.16 with gcc 8.
However I can reproduce the problem in mainline if I force
__perf_pmu__new_alias() to be inlined.
Suppress this by using scnprintf() as has been done elsewhere in perf.
Signed-off-by: Ben Hutchings <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/pmu.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -100,7 +100,7 @@ static int perf_pmu__parse_scale(struct
char path[PATH_MAX];
const char *lc;
- snprintf(path, PATH_MAX, "%s/%s.scale", dir, name);
+ scnprintf(path, PATH_MAX, "%s/%s.scale", dir, name);
fd = open(path, O_RDONLY);
if (fd == -1)
@@ -147,7 +147,7 @@ static int perf_pmu__parse_unit(struct p
ssize_t sret;
int fd;
- snprintf(path, PATH_MAX, "%s/%s.unit", dir, name);
+ scnprintf(path, PATH_MAX, "%s/%s.unit", dir, name);
fd = open(path, O_RDONLY);
if (fd == -1)
@@ -177,7 +177,7 @@ perf_pmu__parse_per_pkg(struct perf_pmu_
char path[PATH_MAX];
int fd;
- snprintf(path, PATH_MAX, "%s/%s.per-pkg", dir, name);
+ scnprintf(path, PATH_MAX, "%s/%s.per-pkg", dir, name);
fd = open(path, O_RDONLY);
if (fd == -1)
@@ -195,7 +195,7 @@ static int perf_pmu__parse_snapshot(stru
char path[PATH_MAX];
int fd;
- snprintf(path, PATH_MAX, "%s/%s.snapshot", dir, name);
+ scnprintf(path, PATH_MAX, "%s/%s.snapshot", dir, name);
fd = open(path, O_RDONLY);
if (fd == -1)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pan Bian <[email protected]>
commit 61157b24e60fb3cd1f85f2c76a7b1d628f970144 upstream.
The function frees qf_inode via iput but then pass qf_inode to
lockdep_set_quota_inode on the failure path. This may result in a
use-after-free bug. The patch frees df_inode only when it is never used.
Fixes: daf647d2dd5 ("ext4: add lockdep annotations for i_data_sem")
Cc: [email protected] # 4.6
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5184,9 +5184,9 @@ static int ext4_quota_enable(struct supe
qf_inode->i_flags |= S_NOQUOTA;
lockdep_set_quota_inode(qf_inode, I_DATA_SEM_QUOTA);
err = dquot_enable(qf_inode, type, format_id, flags);
- iput(qf_inode);
if (err)
lockdep_set_quota_inode(qf_inode, I_DATA_SEM_NORMAL);
+ iput(qf_inode);
return err;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dexuan Cui <[email protected]>
commit fc96df16a1ce80cbb3c316ab7d4dc8cd5c2852ce upstream.
Before 98f4c651762c, we returned zeros for unopened channels.
With 98f4c651762c, we started to return random on-stack values.
We'd better return -EINVAL instead.
Fixes: 98f4c651762c ("hv: move ringbuffer bus attributes to dev_groups")
Cc: [email protected]
Cc: K. Y. Srinivasan <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hv/vmbus_drv.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -316,6 +316,8 @@ static ssize_t out_intr_mask_show(struct
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.current_interrupt_mask);
}
@@ -329,6 +331,8 @@ static ssize_t out_read_index_show(struc
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.current_read_index);
}
@@ -343,6 +347,8 @@ static ssize_t out_write_index_show(stru
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.current_write_index);
}
@@ -357,6 +363,8 @@ static ssize_t out_read_bytes_avail_show
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.bytes_avail_toread);
}
@@ -371,6 +379,8 @@ static ssize_t out_write_bytes_avail_sho
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
return sprintf(buf, "%d\n", outbound.bytes_avail_towrite);
}
@@ -384,6 +394,8 @@ static ssize_t in_intr_mask_show(struct
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.current_interrupt_mask);
}
@@ -397,6 +409,8 @@ static ssize_t in_read_index_show(struct
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.current_read_index);
}
@@ -410,6 +424,8 @@ static ssize_t in_write_index_show(struc
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.current_write_index);
}
@@ -424,6 +440,8 @@ static ssize_t in_read_bytes_avail_show(
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.bytes_avail_toread);
}
@@ -438,6 +456,8 @@ static ssize_t in_write_bytes_avail_show
if (!hv_dev->channel)
return -ENODEV;
+ if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+ return -EINVAL;
hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
return sprintf(buf, "%d\n", inbound.bytes_avail_towrite);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 69d2c86766da2ded2b70281f1bf242cb0d58a778 ]
vr.mifi is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
net/ipv6/ip6mr.c:1845 ip6mr_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
net/ipv6/ip6mr.c:1919 ip6mr_compat_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
Fix this by sanitizing vr.mifi before using it to index mrt->vif_table'
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6mr.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -72,6 +72,8 @@ struct mr6_table {
#endif
};
+#include <linux/nospec.h>
+
struct ip6mr_rule {
struct fib_rule common;
};
@@ -1871,6 +1873,7 @@ int ip6mr_ioctl(struct sock *sk, int cmd
return -EFAULT;
if (vr.mifi >= mrt->maxvif)
return -EINVAL;
+ vr.mifi = array_index_nospec(vr.mifi, mrt->maxvif);
read_lock(&mrt_lock);
vif = &mrt->vif6_table[vr.mifi];
if (MIF_EXISTS(mrt, vr.mifi)) {
@@ -1945,6 +1948,7 @@ int ip6mr_compat_ioctl(struct sock *sk,
return -EFAULT;
if (vr.mifi >= mrt->maxvif)
return -EINVAL;
+ vr.mifi = array_index_nospec(vr.mifi, mrt->maxvif);
read_lock(&mrt_lock);
vif = &mrt->vif6_table[vr.mifi];
if (MIF_EXISTS(mrt, vr.mifi)) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner <[email protected]>
commit 29bdedfd9cf40e59456110ca417a8cb672ac9b92 upstream.
Commit e82b0b382845 ("spi: bcm2835: Fix race on DMA termination") broke
the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit
operands (xtensa, older arm ISAs).
Fix by changing the dma_pending flag's type from bool to unsigned int.
Fixes: e82b0b382845 ("spi: bcm2835: Fix race on DMA termination")
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Martin Sperl <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Cc: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -88,7 +88,7 @@ struct bcm2835_spi {
u8 *rx_buf;
int tx_len;
int rx_len;
- bool dma_pending;
+ unsigned int dma_pending;
};
static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit fde872682e175743e0c3ef939c89e3c6008a1529 upstream.
Some time back, nfsd switched from calling vfs_fsync() to using a new
commit_metadata() hook in export_operations(). If the file system did
not provide a commit_metadata() hook, it fell back to using
sync_inode_metadata(). Unfortunately doesn't work on all file
systems. In particular, it doesn't work on ext4 due to how the inode
gets journalled --- the VFS writeback code will not always call
ext4_write_inode().
So we need to provide our own ext4_nfs_commit_metdata() method which
calls ext4_write_inode() directly.
Google-Bug-Id: 121195940
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 11 +++++++++++
include/trace/events/ext4.h | 20 ++++++++++++++++++++
2 files changed, 31 insertions(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1049,6 +1049,16 @@ static struct dentry *ext4_fh_to_parent(
ext4_nfs_get_inode);
}
+static int ext4_nfs_commit_metadata(struct inode *inode)
+{
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL
+ };
+
+ trace_ext4_nfs_commit_metadata(inode);
+ return ext4_write_inode(inode, &wbc);
+}
+
/*
* Try to release metadata pages (indirect blocks, directories) which are
* mapped via the block device. Since these pages could have journal heads
@@ -1143,6 +1153,7 @@ static const struct export_operations ex
.fh_to_dentry = ext4_fh_to_dentry,
.fh_to_parent = ext4_fh_to_parent,
.get_parent = ext4_get_parent,
+ .commit_metadata = ext4_nfs_commit_metadata,
};
enum {
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -223,6 +223,26 @@ TRACE_EVENT(ext4_drop_inode,
(unsigned long) __entry->ino, __entry->drop)
);
+TRACE_EVENT(ext4_nfs_commit_metadata,
+ TP_PROTO(struct inode *inode),
+
+ TP_ARGS(inode),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ino_t, ino )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ ),
+
+ TP_printk("dev %d,%d ino %lu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino)
+);
+
TRACE_EVENT(ext4_mark_inode_dirty,
TP_PROTO(struct inode *inode, unsigned long IP),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit b8be5674fa9a6f3677865ea93f7803c4212f3e10 upstream.
Signed-off-by: Vasily Averin <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/auth_gss/svcauth_gss.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1105,7 +1105,7 @@ static int svcauth_gss_legacy_init(struc
struct kvec *resv = &rqstp->rq_res.head[0];
struct rsi *rsip, rsikey;
int ret;
- struct sunrpc_net *sn = net_generic(rqstp->rq_xprt->xpt_net, sunrpc_net_id);
+ struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
memset(&rsikey, 0, sizeof(rsikey));
ret = gss_read_verf(gc, argv, authp,
@@ -1216,7 +1216,7 @@ static int svcauth_gss_proxy_init(struct
uint64_t handle;
int status;
int ret;
- struct net *net = rqstp->rq_xprt->xpt_net;
+ struct net *net = SVC_NET(rqstp);
struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
memset(&ud, 0, sizeof(ud));
@@ -1406,7 +1406,7 @@ svcauth_gss_accept(struct svc_rqst *rqst
__be32 *rpcstart;
__be32 *reject_stat = resv->iov_base + resv->iov_len;
int ret;
- struct sunrpc_net *sn = net_generic(rqstp->rq_xprt->xpt_net, sunrpc_net_id);
+ struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
dprintk("RPC: svcauth_gss: argv->iov_len = %zd\n",
argv->iov_len);
@@ -1694,7 +1694,7 @@ svcauth_gss_release(struct svc_rqst *rqs
struct rpc_gss_wire_cred *gc = &gsd->clcred;
struct xdr_buf *resbuf = &rqstp->rq_res;
int stat = -EINVAL;
- struct sunrpc_net *sn = net_generic(rqstp->rq_xprt->xpt_net, sunrpc_net_id);
+ struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
if (gc->gc_proc != RPC_GSS_PROC_DATA)
goto out;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit 45f750c16cae3625014c14c77bd9005eda975d35 upstream.
The code to prevent a bus suspend if a USB3 port was still in link training
also reacted to USB2 port polling state.
This caused bus suspend to busyloop in some cases.
USB2 polling state is different from USB3, and should not prevent bus
suspend.
Limit the USB3 link training state check to USB3 root hub ports only.
The origial commit went to stable so this need to be applied there as well
Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected")
Cc: [email protected]
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1329,7 +1329,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd
portsc_buf[port_index] = 0;
/* Bail out if a USB3 port has a new device in link training */
- if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+ if ((hcd->speed >= HCD_USB3) &&
+ (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
bus_state->bus_suspended = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jörgen Storvist <[email protected]>
commit cc6730df08a291e51e145bc65e24ffb5e2f17ab6 upstream.
Added USB serial option driver support for Simcom SIM7500/SIM7600 series
cellular modules exposing MBIM interface (VID 0x1e0e,PID 0x9003)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9003 Rev=03.18
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech, Incorporated
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
Signed-off-by: Jörgen Storvist <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1759,6 +1759,7 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
.driver_info = RSVD(5) | RSVD(6) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulf Hansson <[email protected]>
commit a0741ba40a009f97c019ae7541dc61c1fdf41efb upstream.
During a re-initialization of the eMMC card, we may fail to re-enable HPI.
In these cases, that isn't properly reflected in the card->ext_csd.hpi_en
bit, as it keeps being set. This may cause following attempts to use HPI,
even if's not enabled. Let's fix this!
Fixes: eb0d8f135b67 ("mmc: core: support HPI send command")
Cc: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/mmc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1608,9 +1608,11 @@ static int mmc_init_card(struct mmc_host
if (err) {
pr_warn("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
+ card->ext_csd.hpi_en = 0;
err = 0;
- } else
+ } else {
card->ext_csd.hpi_en = 1;
+ }
}
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jörgen Storvist <[email protected]>
commit 4b2c01ad902ec02fa962b233decd2f14be3714ba upstream.
Added USB serial option driver support for Fibocom NL678 series cellular
module: VID 2cb7 and PIDs 0x0104 and 0x0105.
Reserved network and ADB interfaces.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0104 Rev=03.10
S: Manufacturer=Fibocom
S: Product=Fibocom NL678-E Modem
S: SerialNumber=12345678
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0105 Rev=03.10
S: Manufacturer=Fibocom
S: Product=Fibocom NL678-E Modem
S: SerialNumber=12345678
C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
Signed-off-by: Jörgen Storvist <[email protected]>
Cc: stable <[email protected]>
Acked-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1956,6 +1956,10 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
+ .driver_info = RSVD(4) | RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
+ .driver_info = RSVD(6) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Willem de Bruijn <[email protected]>
[ Upstream commit 40c3ff6d5e0809505a067dd423c110c5658c478c ]
Packet sockets may call dev_header_parse with NULL daddr. Make
lowpan_header_ops.create fail.
Fixes: 87a93e4eceb4 ("ieee802154: change needed headroom/tailroom")
Signed-off-by: Willem de Bruijn <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ieee802154/6lowpan/tx.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/ieee802154/6lowpan/tx.c
+++ b/net/ieee802154/6lowpan/tx.c
@@ -55,6 +55,9 @@ int lowpan_header_create(struct sk_buff
const u8 *daddr = _daddr;
struct lowpan_addr_info *info;
+ if (!daddr)
+ return -EINVAL;
+
/* TODO:
* if this package isn't ipv6 one, where should it be routed?
*/
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Deepa Dinamani <[email protected]>
[ Upstream commit 3a0ed3e9619738067214871e9cb826fa23b2ddb9 ]
Al Viro mentioned (Message-ID
<[email protected]>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.
sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.
Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.
Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.
The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd2a0c ("net: reorganize struct sock for better data
locality")
Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.
Signed-off-by: Deepa Dinamani <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sock.h | 36 ++++++++++++++++++++++++++++++++++--
net/compat.c | 15 +++++++++------
net/core/sock.c | 3 +++
net/sunrpc/svcsock.c | 2 +-
4 files changed, 47 insertions(+), 9 deletions(-)
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -299,6 +299,7 @@ struct cg_proto;
* @sk_filter: socket filtering instructions
* @sk_timer: sock cleanup timer
* @sk_stamp: time stamp of last packet received
+ * @sk_stamp_seq: lock for accessing sk_stamp on 32 bit architectures only
* @sk_tsflags: SO_TIMESTAMPING socket options
* @sk_tskey: counter to disambiguate concurrent tstamp requests
* @sk_socket: Identd and reporting IO signals
@@ -434,6 +435,9 @@ struct sock {
long sk_sndtimeo;
struct timer_list sk_timer;
ktime_t sk_stamp;
+#if BITS_PER_LONG==32
+ seqlock_t sk_stamp_seq;
+#endif
u16 sk_tsflags;
u32 sk_tskey;
struct socket *sk_socket;
@@ -2146,6 +2150,34 @@ static inline void sk_drops_add(struct s
atomic_add(segs, &sk->sk_drops);
}
+static inline ktime_t sock_read_timestamp(struct sock *sk)
+{
+#if BITS_PER_LONG==32
+ unsigned int seq;
+ ktime_t kt;
+
+ do {
+ seq = read_seqbegin(&sk->sk_stamp_seq);
+ kt = sk->sk_stamp;
+ } while (read_seqretry(&sk->sk_stamp_seq, seq));
+
+ return kt;
+#else
+ return sk->sk_stamp;
+#endif
+}
+
+static inline void sock_write_timestamp(struct sock *sk, ktime_t kt)
+{
+#if BITS_PER_LONG==32
+ write_seqlock(&sk->sk_stamp_seq);
+ sk->sk_stamp = kt;
+ write_sequnlock(&sk->sk_stamp_seq);
+#else
+ sk->sk_stamp = kt;
+#endif
+}
+
void __sock_recv_timestamp(struct msghdr *msg, struct sock *sk,
struct sk_buff *skb);
void __sock_recv_wifi_status(struct msghdr *msg, struct sock *sk,
@@ -2170,7 +2202,7 @@ sock_recv_timestamp(struct msghdr *msg,
(sk->sk_tsflags & SOF_TIMESTAMPING_RAW_HARDWARE)))
__sock_recv_timestamp(msg, sk, skb);
else
- sk->sk_stamp = kt;
+ sock_write_timestamp(sk, kt);
if (sock_flag(sk, SOCK_WIFI_STATUS) && skb->wifi_acked_valid)
__sock_recv_wifi_status(msg, sk, skb);
@@ -2190,7 +2222,7 @@ static inline void sock_recv_ts_and_drop
if (sk->sk_flags & FLAGS_TS_OR_DROPS || sk->sk_tsflags & TSFLAGS_ANY)
__sock_recv_ts_and_drops(msg, sk, skb);
else
- sk->sk_stamp = skb->tstamp;
+ sock_write_timestamp(sk, skb->tstamp);
}
void __sock_tx_timestamp(const struct sock *sk, __u8 *tx_flags);
--- a/net/compat.c
+++ b/net/compat.c
@@ -443,12 +443,14 @@ int compat_sock_get_timestamp(struct soc
err = -ENOENT;
if (!sock_flag(sk, SOCK_TIMESTAMP))
sock_enable_timestamp(sk, SOCK_TIMESTAMP);
- tv = ktime_to_timeval(sk->sk_stamp);
+ tv = ktime_to_timeval(sock_read_timestamp(sk));
+
if (tv.tv_sec == -1)
return err;
if (tv.tv_sec == 0) {
- sk->sk_stamp = ktime_get_real();
- tv = ktime_to_timeval(sk->sk_stamp);
+ ktime_t kt = ktime_get_real();
+ sock_write_timestamp(sk, kt);
+ tv = ktime_to_timeval(kt);
}
err = 0;
if (put_user(tv.tv_sec, &ctv->tv_sec) ||
@@ -471,12 +473,13 @@ int compat_sock_get_timestampns(struct s
err = -ENOENT;
if (!sock_flag(sk, SOCK_TIMESTAMP))
sock_enable_timestamp(sk, SOCK_TIMESTAMP);
- ts = ktime_to_timespec(sk->sk_stamp);
+ ts = ktime_to_timespec(sock_read_timestamp(sk));
if (ts.tv_sec == -1)
return err;
if (ts.tv_sec == 0) {
- sk->sk_stamp = ktime_get_real();
- ts = ktime_to_timespec(sk->sk_stamp);
+ ktime_t kt = ktime_get_real();
+ sock_write_timestamp(sk, kt);
+ ts = ktime_to_timespec(kt);
}
err = 0;
if (put_user(ts.tv_sec, &ctv->tv_sec) ||
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2423,6 +2423,9 @@ void sock_init_data(struct socket *sock,
sk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT;
sk->sk_stamp = ktime_set(-1L, 0);
+#if BITS_PER_LONG==32
+ seqlock_init(&sk->sk_stamp_seq);
+#endif
#ifdef CONFIG_NET_RX_BUSY_POLL
sk->sk_napi_id = 0;
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -614,7 +614,7 @@ static int svc_udp_recvfrom(struct svc_r
/* Don't enable netstamp, sunrpc doesn't
need that much accuracy */
}
- svsk->sk_sk->sk_stamp = skb->tstamp;
+ sock_write_timestamp(svsk->sk_sk, skb->tstamp);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); /* there may be more data... */
len = skb->len - sizeof(struct udphdr);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner <[email protected]>
commit dbc944115eed48af110646992893dc43321368d8 upstream.
If submission of a DMA TX transfer succeeds but submission of the
corresponding RX transfer does not, the BCM2835 SPI driver terminates
the TX transfer but neglects to reset the dma_pending flag to false.
Thus, if the next transfer uses interrupt mode (because it is shorter
than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout,
dmaengine_terminate_all() will be called both for TX (once more) and
for RX (which was never started in the first place). Fix it.
Signed-off-by: Lukas Wunner <[email protected]>
Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Cc: [email protected] # v4.2+
Cc: Mathias Duckeck <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Martin Sperl <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -341,6 +341,7 @@ static int bcm2835_spi_transfer_one_dma(
if (ret) {
/* need to reset on errors */
dmaengine_terminate_all(master->dma_tx);
+ bs->dma_pending = false;
bcm2835_spi_reset_hw(master);
return ret;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen <[email protected]>
commit 92aa0718c9fa5160ad2f0e7b5bffb52f1ea1e51a upstream.
This patch is borrowed from ARM64 to ensure pmd_present() returns false
after pmd_mknotpresent(). This is needed for THP.
References: 5bb1cc0ff9a6 ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()")
Reviewed-by: James Hogan <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/21135/
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Steven J . Hill <[email protected]>
Cc: [email protected]
Cc: Fuxin Zhang <[email protected]>
Cc: Zhangjin Wu <[email protected]>
Cc: <[email protected]> # 3.8+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/pgtable-64.h | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -189,6 +189,11 @@ static inline int pmd_bad(pmd_t pmd)
static inline int pmd_present(pmd_t pmd)
{
+#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+ if (unlikely(pmd_val(pmd) & _PAGE_HUGE))
+ return pmd_val(pmd) & _PAGE_PRESENT;
+#endif
+
return pmd_val(pmd) != (unsigned long) invalid_pte_table;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner <[email protected]>
commit 56c1723426d3cfd4723bfbfce531d7b38bae6266 upstream.
The IRQ handler bcm2835_spi_interrupt() first reads as much as possible
from the RX FIFO, then writes as much as possible to the TX FIFO.
Afterwards it decides whether the transfer is finished by checking if
the TX FIFO is empty.
If very few bytes were written to the TX FIFO, they may already have
been transmitted by the time the FIFO's emptiness is checked. As a
result, the transfer will be declared finished and the chip will be
reset without reading the corresponding received bytes from the RX FIFO.
The odds of this happening increase with a high clock frequency (such
that the TX FIFO drains quickly) and either passing "threadirqs" on the
command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ
handler may be preempted between filling the TX FIFO and checking its
emptiness).
Fix by instead checking whether rx_len has reached zero, which means
that the transfer has been received in full. This is also more
efficient as it avoids one bus read access per interrupt. Note that
bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine
whether the transfer has finished.
Signed-off-by: Lukas Wunner <[email protected]>
Fixes: e34ff011c70e ("spi: bcm2835: move to the transfer_one driver model")
Cc: [email protected] # v4.1+
Cc: Mathias Duckeck <[email protected]>
Cc: Frank Pavlic <[email protected]>
Cc: Martin Sperl <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -155,8 +155,7 @@ static irqreturn_t bcm2835_spi_interrupt
/* Write as many bytes as possible to FIFO */
bcm2835_wr_fifo(bs);
- /* based on flags decide if we can finish the transfer */
- if (bcm2835_rd(bs, BCM2835_SPI_CS) & BCM2835_SPI_CS_DONE) {
+ if (!bs->rx_len) {
/* Transfer complete - reset SPI HW */
bcm2835_spi_reset_hw(master);
/* wake up the framework */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 8ea3819c0bbef57a51d8abe579e211033e861677 upstream.
The cordic routine for calculating sines and cosines that was added in
commit 6f98e62a9f1b ("b43: update cordic code to match current specs")
contains an error whereby a quantity declared u32 can in fact go negative.
This problem was detected by Priit Laes who is switching b43 to use the
routine in the library functions of the kernel.
Fixes: 986504540306 ("b43: make cordic common (LP-PHY and N-PHY need it)")
Reported-by: Priit Laes <[email protected]>
Cc: Rafał Miłecki <[email protected]>
Cc: Stable <[email protected]> # 2.6.34
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: Priit Laes <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/b43/phy_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -616,7 +616,7 @@ struct b43_c32 b43_cordic(int theta)
u8 i;
s32 tmp;
s8 signx = 1;
- u32 angle = 0;
+ s32 angle = 0;
struct b43_c32 ret = { .i = 39797, .q = 0, };
while (theta > (180 << 16))
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit c0174726c3976e67da8649ac62cae43220ae173a upstream.
Fixes 6d40c4a708e0 ("dlm: improve error and debug messages")
Cc: [email protected] # 3.5
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/lock.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -4178,6 +4178,7 @@ static int receive_convert(struct dlm_ls
(unsigned long long)lkb->lkb_recover_seq,
ms->m_header.h_nodeid, ms->m_lkid);
error = -ENOENT;
+ dlm_put_lkb(lkb);
goto fail;
}
@@ -4231,6 +4232,7 @@ static int receive_unlock(struct dlm_ls
lkb->lkb_id, lkb->lkb_remid,
ms->m_header.h_nodeid, ms->m_lkid);
error = -ENOENT;
+ dlm_put_lkb(lkb);
goto fail;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit b15c87263a69272423771118c653e9a1d0672caa upstream.
We have received a bug report that an injected MCE about faulty memory
prevents memory offline to succeed on 4.4 base kernel. The underlying
reason was that the HWPoison page has an elevated reference count and the
migration keeps failing. There are two problems with that. First of all
it is dubious to migrate the poisoned page because we know that accessing
that memory is possible to fail. Secondly it doesn't make any sense to
migrate a potentially broken content and preserve the memory corruption
over to a new location.
Oscar has found out that 4.4 and the current upstream kernels behave
slightly differently with his simply testcase
===
int main(void)
{
int ret;
int i;
int fd;
char *array = malloc(4096);
char *array_locked = malloc(4096);
fd = open("/tmp/data", O_RDONLY);
read(fd, array, 4095);
for (i = 0; i < 4096; i++)
array_locked[i] = 'd';
ret = mlock((void *)PAGE_ALIGN((unsigned long)array_locked), sizeof(array_locked));
if (ret)
perror("mlock");
sleep (20);
ret = madvise((void *)PAGE_ALIGN((unsigned long)array_locked), 4096, MADV_HWPOISON);
if (ret)
perror("madvise");
for (i = 0; i < 4096; i++)
array_locked[i] = 'd';
return 0;
}
===
+ offline this memory.
In 4.4 kernels he saw the hwpoisoned page to be returned back to the LRU
list
kernel: [<ffffffff81019ac9>] dump_trace+0x59/0x340
kernel: [<ffffffff81019e9a>] show_stack_log_lvl+0xea/0x170
kernel: [<ffffffff8101ac71>] show_stack+0x21/0x40
kernel: [<ffffffff8132bb90>] dump_stack+0x5c/0x7c
kernel: [<ffffffff810815a1>] warn_slowpath_common+0x81/0xb0
kernel: [<ffffffff811a275c>] __pagevec_lru_add_fn+0x14c/0x160
kernel: [<ffffffff811a2eed>] pagevec_lru_move_fn+0xad/0x100
kernel: [<ffffffff811a334c>] __lru_cache_add+0x6c/0xb0
kernel: [<ffffffff81195236>] add_to_page_cache_lru+0x46/0x70
kernel: [<ffffffffa02b4373>] extent_readpages+0xc3/0x1a0 [btrfs]
kernel: [<ffffffff811a16d7>] __do_page_cache_readahead+0x177/0x200
kernel: [<ffffffff811a18c8>] ondemand_readahead+0x168/0x2a0
kernel: [<ffffffff8119673f>] generic_file_read_iter+0x41f/0x660
kernel: [<ffffffff8120e50d>] __vfs_read+0xcd/0x140
kernel: [<ffffffff8120e9ea>] vfs_read+0x7a/0x120
kernel: [<ffffffff8121404b>] kernel_read+0x3b/0x50
kernel: [<ffffffff81215c80>] do_execveat_common.isra.29+0x490/0x6f0
kernel: [<ffffffff81215f08>] do_execve+0x28/0x30
kernel: [<ffffffff81095ddb>] call_usermodehelper_exec_async+0xfb/0x130
kernel: [<ffffffff8161c045>] ret_from_fork+0x55/0x80
And that latter confuses the hotremove path because an LRU page is
attempted to be migrated and that fails due to an elevated reference
count. It is quite possible that the reuse of the HWPoisoned page is some
kind of fixed race condition but I am not really sure about that.
With the upstream kernel the failure is slightly different. The page
doesn't seem to have LRU bit set but isolate_movable_page simply fails and
do_migrate_range simply puts all the isolated pages back to LRU and
therefore no progress is made and scan_movable_pages finds same set of
pages over and over again.
Fix both cases by explicitly checking HWPoisoned pages before we even try
to get reference on the page, try to unmap it if it is still mapped. As
explained by Naoya:
: Hwpoison code never unmapped those for no big reason because
: Ksm pages never dominate memory, so we simply didn't have strong
: motivation to save the pages.
Also put WARN_ON(PageLRU) in case there is a race and we can hit LRU
HWPoison pages which shouldn't happen but I couldn't convince myself about
that. Naoya has noted the following:
: Theoretically no such gurantee, because try_to_unmap() doesn't have a
: guarantee of success and then memory_failure() returns immediately
: when hwpoison_user_mappings fails.
: Or the following code (comes after hwpoison_user_mappings block) also impli=
: es
: that the target page can still have PageLRU flag.
:
: /*
: * Torn down by someone else?
: */
: if (PageLRU(p) && !PageSwapCache(p) && p->mapping =3D=3D NULL) {
: action_result(pfn, MF_MSG_TRUNCATED_LRU, MF_IGNORED);
: res =3D -EBUSY;
: goto out;
: }
:
: So I think it's OK to keep "if (WARN_ON(PageLRU(page)))" block in
: current version of your patch.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Debugged-by: Oscar Salvador <[email protected]>
Tested-by: Oscar Salvador <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory_hotplug.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -32,6 +32,7 @@
#include <linux/hugetlb.h>
#include <linux/memblock.h>
#include <linux/bootmem.h>
+#include <linux/rmap.h>
#include <asm/tlbflush.h>
@@ -1471,6 +1472,21 @@ do_migrate_range(unsigned long start_pfn
continue;
}
+ /*
+ * HWPoison pages have elevated reference counts so the migration would
+ * fail on them. It also doesn't make any sense to migrate them in the
+ * first place. Still try to unmap such a page in case it is still mapped
+ * (e.g. current hwpoison implementation doesn't unmap KSM pages but keep
+ * the unmap as the catch all safety net).
+ */
+ if (PageHWPoison(page)) {
+ if (WARN_ON(PageLRU(page)))
+ isolate_lru_page(page);
+ if (page_mapped(page))
+ try_to_unmap(page, TTU_IGNORE_MLOCK | TTU_IGNORE_ACCESS);
+ continue;
+ }
+
if (!get_page_unless_zero(page))
continue;
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).
More importantly, this patch fixes one issue introduced in a22c4d7e34402cc
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.
Fixes: a22c4d7e34402ccdf3 ("block: re-add discard_granularity and alignment checks")
Cc: [email protected]
Cc: Ming Lin <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Xiao Ni <[email protected]>
Tested-by: Mariusz Dabrowski <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-lib.c | 28 ++--------------------------
1 file changed, 2 insertions(+), 26 deletions(-)
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -43,8 +43,6 @@ int blkdev_issue_discard(struct block_de
DECLARE_COMPLETION_ONSTACK(wait);
struct request_queue *q = bdev_get_queue(bdev);
int type = REQ_WRITE | REQ_DISCARD;
- unsigned int granularity;
- int alignment;
struct bio_batch bb;
struct bio *bio;
int ret = 0;
@@ -56,10 +54,6 @@ int blkdev_issue_discard(struct block_de
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- /* Zero-sector (unknown) and one-sector granularities are the same. */
- granularity = max(q->limits.discard_granularity >> 9, 1U);
- alignment = (bdev_discard_alignment(bdev) >> 9) % granularity;
-
if (flags & BLKDEV_DISCARD_SECURE) {
if (!blk_queue_secdiscard(q))
return -EOPNOTSUPP;
@@ -72,8 +66,8 @@ int blkdev_issue_discard(struct block_de
blk_start_plug(&plug);
while (nr_sects) {
- unsigned int req_sects;
- sector_t end_sect, tmp;
+ unsigned int req_sects = nr_sects;
+ sector_t end_sect;
bio = bio_alloc(gfp_mask, 1);
if (!bio) {
@@ -81,28 +75,10 @@ int blkdev_issue_discard(struct block_de
break;
}
- /*
- * Issue in chunks of the user defined max discard setting,
- * ensuring that bi_size doesn't overflow
- */
- req_sects = min_t(sector_t, nr_sects,
- q->limits.max_discard_sectors);
if (req_sects > UINT_MAX >> 9)
req_sects = UINT_MAX >> 9;
- /*
- * If splitting a request, and the next starting sector would be
- * misaligned, stop the discard at the previous aligned sector.
- */
end_sect = sector + req_sects;
- tmp = end_sect;
- if (req_sects < nr_sects &&
- sector_div(tmp, granularity) != alignment) {
- end_sect = end_sect - alignment;
- sector_div(end_sect, granularity);
- end_sect = end_sect * granularity + alignment;
- req_sects = end_sect - sector;
- }
bio->bi_iter.bi_sector = sector;
bio->bi_end_io = bio_batch_end_io;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier <[email protected]>
commit 60a161b7e5b2a252ff0d4c622266a7d8da1120ce upstream.
Suppose adapter (open) recovery is between opened QDIO queues and before
(the end of) initial posting of status read buffers (SRBs). This time
window can be seconds long due to FSF_PROT_HOST_CONNECTION_INITIALIZING
causing by design looping with exponential increase sleeps in the function
performing exchange config data during recovery
[zfcp_erp_adapter_strat_fsf_xconf()]. Recovery triggered by local link up.
Suppose an event occurs for which the FCP channel would send an unsolicited
notification to zfcp by means of a previously posted SRB. We saw it with
local cable pull (link down) in multi-initiator zoning with multiple
NPIV-enabled subchannels of the same shared FCP channel.
As soon as zfcp_erp_adapter_strategy_open_fsf() starts posting the initial
status read buffers from within the adapter's ERP thread, the channel does
send an unsolicited notification.
Since v2.6.27 commit d26ab06ede83 ("[SCSI] zfcp: receiving an unsolicted
status can lead to I/O stall"), zfcp_fsf_status_read_handler() schedules
adapter->stat_work to re-fill the just consumed SRB from a work item.
Now the ERP thread and the work item post SRBs in parallel. Both contexts
call the helper function zfcp_status_read_refill(). The tracking of
missing (to be posted / re-filled) SRBs is not thread-safe due to separate
atomic_read() and atomic_dec(), in order to depend on posting
success. Hence, both contexts can see
atomic_read(&adapter->stat_miss) == 1. One of the two contexts posts
one too many SRB. Zfcp gets QDIO_ERROR_SLSB_STATE on the output queue
(trace tag "qdireq1") leading to zfcp_erp_adapter_shutdown() in
zfcp_qdio_handler_error().
An obvious and seemingly clean fix would be to schedule stat_work from the
ERP thread and wait for it to finish. This would serialize all SRB
re-fills. However, we already have another work item wait on the ERP
thread: adapter->scan_work runs zfcp_fc_scan_ports() which calls
zfcp_fc_eval_gpn_ft(). The latter calls zfcp_erp_wait() to wait for all the
open port recoveries during zfcp auto port scan, but in fact it waits for
any pending recovery including an adapter recovery. This approach leads to
a deadlock. [see also v3.19 commit 18f87a67e6d6 ("zfcp: auto port scan
resiliency"); v2.6.37 commit d3e1088d6873
("[SCSI] zfcp: No ERP escalation on gpn_ft eval");
v2.6.28 commit fca55b6fb587
("[SCSI] zfcp: fix deadlock between wq triggered port scan and ERP")
fixing v2.6.27 commit c57a39a45a76
("[SCSI] zfcp: wait until adapter is finished with ERP during auto-port");
v2.6.27 commit cc8c282963bd
("[SCSI] zfcp: Automatically attach remote ports")]
Instead make the accounting of missing SRBs atomic for parallel execution
in both the ERP thread and adapter->stat_work.
Signed-off-by: Steffen Maier <[email protected]>
Fixes: d26ab06ede83 ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall")
Cc: <[email protected]> #2.6.27+
Reviewed-by: Jens Remus <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_aux.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -275,16 +275,16 @@ static void zfcp_free_low_mem_buffers(st
*/
int zfcp_status_read_refill(struct zfcp_adapter *adapter)
{
- while (atomic_read(&adapter->stat_miss) > 0)
+ while (atomic_add_unless(&adapter->stat_miss, -1, 0))
if (zfcp_fsf_status_read(adapter->qdio)) {
+ atomic_inc(&adapter->stat_miss); /* undo add -1 */
if (atomic_read(&adapter->stat_miss) >=
adapter->stat_read_buf_num) {
zfcp_erp_adapter_reopen(adapter, 0, "axsref1");
return 1;
}
break;
- } else
- atomic_dec(&adapter->stat_miss);
+ }
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <[email protected]>
[ Upstream commit d81c5054a5d1d4999c7cdead7636b6cd4af83d36 ]
At least old Xen net backends seem to send frags with no real data
sometimes. In case such a fragment happens to occur with the frag limit
already reached the frontend will BUG currently even if this situation
is easily recoverable.
Modify the BUG_ON() condition accordingly.
Tested-by: Dietmar Hahn <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netfront.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -889,7 +889,7 @@ static RING_IDX xennet_fill_frags(struct
if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
- BUG_ON(pull_to <= skb_headlen(skb));
+ BUG_ON(pull_to < skb_headlen(skb));
__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
}
if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
commit 0b479790684192ab7024ce6a621f93f6d0a64d92 upstream.
While booting with rootfs on MMC, the following warning is encountered
on OMAP4430:
omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536]
This is because the DMA engine has a default maximum segment size of 64K
but HSMMC sets:
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
which ends up telling the block layer that we support a maximum segment
size of 65535*512, which exceeds the advertised DMA engine capabilities.
Fix this by clamping the maximum segment size to the lower of the
maximum request size and of the DMA engine device used for either DMA
channel.
Signed-off-by: Russell King <[email protected]>
Cc: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/omap_hsmmc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2117,7 +2117,6 @@ static int omap_hsmmc_probe(struct platf
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
- mmc->max_seg_size = mmc->max_req_size;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
@@ -2174,6 +2173,17 @@ static int omap_hsmmc_probe(struct platf
goto err_irq;
}
+ /*
+ * Limit the maximum segment size to the lower of the request size
+ * and the DMA engine device segment size limits. In reality, with
+ * 32-bit transfers, the DMA engine can do longer segments than this
+ * but there is no way to represent that in the DMA model - if we
+ * increase this figure here, we get warnings from the DMA API debug.
+ */
+ mmc->max_seg_size = min3(mmc->max_req_size,
+ dma_get_max_seg_size(host->rx_chan->device->dev),
+ dma_get_max_seg_size(host->tx_chan->device->dev));
+
/* Request IRQ for MMC operations */
ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
mmc_hostname(mmc), host);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit 5648451e30a0d13d11796574919a359025d52cce ]
vr.vifi is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
net/ipv4/ipmr.c:1616 ipmr_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
net/ipv4/ipmr.c:1690 ipmr_compat_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
Fix this by sanitizing vr.vifi before using it to index mrt->vif_table'
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ipmr.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -66,6 +66,7 @@
#include <net/netlink.h>
#include <net/fib_rules.h>
#include <linux/netconf.h>
+#include <linux/nospec.h>
#if defined(CONFIG_IP_PIMSM_V1) || defined(CONFIG_IP_PIMSM_V2)
#define CONFIG_IP_PIMSM 1
@@ -1574,6 +1575,7 @@ int ipmr_compat_ioctl(struct sock *sk, u
return -EFAULT;
if (vr.vifi >= mrt->maxvif)
return -EINVAL;
+ vr.vifi = array_index_nospec(vr.vifi, mrt->maxvif);
read_lock(&mrt_lock);
vif = &mrt->vif_table[vr.vifi];
if (VIF_EXISTS(mrt, vr.vifi)) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ca92e173ab34a4f7fc4128bd372bd96f1af6f507 ]
sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the
hash mask.
Fixes: 28d8909bc790 ("[XFRM]: Export SAD info.")
Signed-off-by: Benjamin Poirier <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_state.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 9b6e51450fc5..13f261feb75c 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -623,7 +623,7 @@ void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
{
spin_lock_bh(&net->xfrm.xfrm_state_lock);
si->sadcnt = net->xfrm.state_num;
- si->sadhcnt = net->xfrm.state_hmask;
+ si->sadhcnt = net->xfrm.state_hmask + 1;
si->sadhmcnt = xfrm_state_hashmax;
spin_unlock_bh(&net->xfrm.xfrm_state_lock);
}
--
2.19.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 06489cfbd915ff36c8e36df27f1c2dc60f97ca56 upstream.
Given the fact that devm_memremap_pages() requires a percpu_ref that is
torn down by devm_memremap_pages_release() the current support for mapping
RAM is broken.
Support for remapping "System RAM" has been broken since the beginning and
there is no existing user of this this code path, so just kill the support
and make it an explicit error.
This cleanup also simplifies a follow-on patch to fix the error path when
setting a devm release action for devm_memremap_pages_release() fails.
Link: http://lkml.kernel.org/r/154275557997.76910.14689813630968180480.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Reviewed-by: "Jérôme Glisse" <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/memremap.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
--- a/kernel/memremap.c
+++ b/kernel/memremap.c
@@ -171,15 +171,12 @@ void *devm_memremap_pages(struct device
struct page_map *page_map;
int error, nid;
- if (is_ram == REGION_MIXED) {
- WARN_ONCE(1, "%s attempted on mixed region %pr\n",
- __func__, res);
+ if (is_ram != REGION_DISJOINT) {
+ WARN_ONCE(1, "%s attempted on %s region %pr\n", __func__,
+ is_ram == REGION_MIXED ? "mixed" : "ram", res);
return ERR_PTR(-ENXIO);
}
- if (is_ram == REGION_INTERSECTS)
- return __va(res->start);
-
page_map = devres_alloc_node(devm_memremap_pages_release,
sizeof(*page_map), GFP_KERNEL, dev_to_node(dev));
if (!page_map)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen <[email protected]>
commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream.
KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.
Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Steven J . Hill <[email protected]>
Cc: [email protected]
Cc: Fuxin Zhang <[email protected]>
Cc: Zhangjin Wu <[email protected]>
Cc: <[email protected]> # 2.6.36+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/boot/compressed/calc_vmlinuz_load_addr.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -13,6 +13,7 @@
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
+#include "../../../../include/linux/sizes.h"
int main(int argc, char *argv[])
{
@@ -45,11 +46,11 @@ int main(int argc, char *argv[])
vmlinuz_load_addr = vmlinux_load_addr + vmlinux_size;
/*
- * Align with 16 bytes: "greater than that used for any standard data
- * types by a MIPS compiler." -- See MIPS Run Linux (Second Edition).
+ * Align with 64KB: KEXEC needs load sections to be aligned to PAGE_SIZE,
+ * which may be as large as 64KB depending on the kernel configuration.
*/
- vmlinuz_load_addr += (16 - vmlinux_size % 16);
+ vmlinuz_load_addr += (SZ_64K - vmlinux_size % SZ_64K);
printf("0x%llx\n", vmlinuz_load_addr);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Borntraeger <[email protected]>
commit fdd669684655c07dacbdb0d753fd13833de69a33 upstream.
Calling the test program genwqe_cksum with the default buffer size of
2MB triggers the following kernel warning on s390:
WARNING: CPU: 30 PID: 9311 at mm/page_alloc.c:3189 __alloc_pages_nodemask+0x45c/0xbe0
CPU: 30 PID: 9311 Comm: genwqe_cksum Kdump: loaded Not tainted 3.10.0-957.el7.s390x #1
task: 00000005e5d13980 ti: 00000005e7c6c000 task.ti: 00000005e7c6c000
Krnl PSW : 0704c00180000000 00000000002780ac (__alloc_pages_nodemask+0x45c/0xbe0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
Krnl GPRS: 00000000002932b8 0000000000b73d7c 0000000000000010 0000000000000009
0000000000000041 00000005e7c6f9b8 0000000000000001 00000000000080d0
0000000000000000 0000000000b70500 0000000000000001 0000000000000000
0000000000b70528 00000000007682c0 0000000000277df2 00000005e7c6f9a0
Krnl Code: 000000000027809e: de7195001000 ed 1280(114,%r9),0(%r1)
00000000002780a4: a774fead brc 7,277dfe
#00000000002780a8: a7f40001 brc 15,2780aa
>00000000002780ac: 92011000 mvi 0(%r1),1
00000000002780b0: a7f4fea7 brc 15,277dfe
00000000002780b4: 9101c6b6 tm 1718(%r12),1
00000000002780b8: a784ff3a brc 8,277f2c
00000000002780bc: a7f4fe2e brc 15,277d18
Call Trace:
([<0000000000277df2>] __alloc_pages_nodemask+0x1a2/0xbe0)
[<000000000013afae>] s390_dma_alloc+0xfe/0x310
[<000003ff8065f362>] __genwqe_alloc_consistent+0xfa/0x148 [genwqe_card]
[<000003ff80658f7a>] genwqe_mmap+0xca/0x248 [genwqe_card]
[<00000000002b2712>] mmap_region+0x4e2/0x778
[<00000000002b2c54>] do_mmap+0x2ac/0x3e0
[<0000000000292d7e>] vm_mmap_pgoff+0xd6/0x118
[<00000000002b081c>] SyS_mmap_pgoff+0xdc/0x268
[<00000000002b0a34>] SyS_old_mmap+0x8c/0xb0
[<000000000074e518>] sysc_tracego+0x14/0x1e
[<000003ffacf87dc6>] 0x3ffacf87dc6
turns out the check in __genwqe_alloc_consistent uses "> MAX_ORDER"
while the mm code uses ">= MAX_ORDER". Fix genwqe.
Cc: [email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Frank Haverkamp <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/genwqe/card_utils.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -217,7 +217,7 @@ u32 genwqe_crc32(u8 *buff, size_t len, u
void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size,
dma_addr_t *dma_handle)
{
- if (get_order(size) > MAX_ORDER)
+ if (get_order(size) >= MAX_ORDER)
return NULL;
return dma_alloc_coherent(&cd->pci_dev->dev, size, dma_handle,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil <[email protected]>
commit 560ccb75c2caa6b1039dec1a53cd2ef526f5bf03 upstream.
When vivid_update_format_cap() is called it should free any overlay
bitmap since the compose size will change.
Signed-off-by: Hans Verkuil <[email protected]>
Reported-by: [email protected]
Cc: <[email protected]> # for v3.18 and up
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/vivid/vivid-vid-cap.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/platform/vivid/vivid-vid-cap.c
+++ b/drivers/media/platform/vivid/vivid-vid-cap.c
@@ -461,6 +461,8 @@ void vivid_update_format_cap(struct vivi
tpg_s_rgb_range(&dev->tpg, v4l2_ctrl_g_ctrl(dev->rgb_range_cap));
break;
}
+ vfree(dev->bitmap_cap);
+ dev->bitmap_cap = NULL;
vivid_update_quality(dev);
tpg_reset_source(&dev->tpg, dev->src_rect.width, dev->src_rect.height, dev->field_cap);
dev->crop_cap = dev->src_rect;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Macpaul Lin <[email protected]>
commit eafb27fa5283599ce6c5492ea18cf636a28222bb upstream.
Mediatek Preloader is a proprietary embedded boot loader for loading
Little Kernel and Linux into device DRAM.
This boot loader also handle firmware update. Mediatek Preloader will be
enumerated as a virtual COM port when the device is connected to Windows
or Linux OS via CDC-ACM class driver. When the USB enumeration has been
done, Mediatek Preloader will send out handshake command "READY" to PC
actively instead of waiting command from the download tool.
Since Linux 4.12, the commit "tty: reset termios state on device
registration" (93857edd9829e144acb6c7e72d593f6e01aead66) causes Mediatek
Preloader receiving some abnoraml command like "READYXX" as it sent.
This will be recognized as an incorrect response. The behavior change
also causes the download handshake fail. This change only affects
subsequent connects if the reconnected device happens to get the same minor
number.
By disabling the ECHO termios flag could avoid this problem. However, it
cannot be done by user space configuration when download tool open
/dev/ttyACM0. This is because the device running Mediatek Preloader will
send handshake command "READY" immediately once the CDC-ACM driver is
ready.
This patch wants to fix above problem by introducing "DISABLE_ECHO"
property in driver_info. When Mediatek Preloader is connected, the
CDC-ACM driver could disable ECHO flag in termios to avoid the problem.
Signed-off-by: Macpaul Lin <[email protected]>
Cc: [email protected]
Reviewed-by: Johan Hovold <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 10 ++++++++++
drivers/usb/class/cdc-acm.h | 1 +
2 files changed, 11 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -507,6 +507,13 @@ static int acm_tty_install(struct tty_dr
if (retval)
goto error_init_termios;
+ /*
+ * Suppress initial echoing for some devices which might send data
+ * immediately after acm driver has been installed.
+ */
+ if (acm->quirks & DISABLE_ECHO)
+ tty->termios.c_lflag &= ~ECHO;
+
tty->driver_data = acm;
return 0;
@@ -1677,6 +1684,9 @@ static const struct usb_device_id acm_id
{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; [email protected] */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */
+ .driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */
+ },
{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -134,3 +134,4 @@ struct acm {
#define QUIRK_CONTROL_LINE_STATE BIT(6)
#define CLEAR_HALT_CONDITIONS BIT(7)
#define SEND_ZERO_PACKET BIT(8)
+#define DISABLE_ECHO BIT(9)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit 3c1392d4c49962a31874af14ae9ff289cb2b3851 upstream.
Updating mseq makes client think importer mds has accepted all prior
cap messages and importer mds knows what caps client wants. Actually
some cap messages may have been dropped because of mseq mismatch.
If mseq is left untouched, importing cap's mds_wanted later will get
reset by cap import message.
Cc: [email protected]
Signed-off-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/caps.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -3243,7 +3243,6 @@ retry:
tcap->cap_id = t_cap_id;
tcap->seq = t_seq - 1;
tcap->issue_seq = t_seq - 1;
- tcap->mseq = t_mseq;
tcap->issued |= issued;
tcap->implemented |= issued;
if (cap == ci->i_auth_cap)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Gruenbacher <[email protected]>
commit 2d29f6b96d8f80322ed2dd895bca590491c38d34 upstream.
Fix the resource group wrap-around logic in gfs2_rbm_find that commit
e579ed4f44 broke. The bug can lead to unnecessary repeated scanning of the
same bitmaps; there is a risk that future changes will turn this into an
endless loop.
Fixes: e579ed4f44 ("GFS2: Introduce rbm field bii")
Cc: [email protected] # v3.13+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/rgrp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1720,9 +1720,9 @@ static int gfs2_rbm_find(struct gfs2_rbm
goto next_iter;
}
if (ret == -E2BIG) {
+ n += rbm->bii - initial_bii;
rbm->bii = 0;
rbm->offset = 0;
- n += (rbm->bii - initial_bii);
goto res_covered_end_of_rgrp;
}
return ret;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 1524f4e47f90b27a3ac84efbdd94c63172246a6f upstream.
The "chip->dsp_spos_instance" can be NULL on some of the ealier error
paths in snd_cs46xx_create().
Reported-by: "Yavuz, Tuba" <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/cs46xx/dsp_spos.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/cs46xx/dsp_spos.c
+++ b/sound/pci/cs46xx/dsp_spos.c
@@ -899,6 +899,9 @@ int cs46xx_dsp_proc_done (struct snd_cs4
struct dsp_spos_instance * ins = chip->dsp_spos_instance;
int i;
+ if (!ins)
+ return 0;
+
snd_info_free_entry(ins->proc_sym_info_entry);
ins->proc_sym_info_entry = NULL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
commit ec5b5ad6e272d8d6b92d1007f79574919862a2d2 upstream.
The 'nr_pages' attribute of the 'msc' subdevices parses a comma-separated
list of window sizes, passed from userspace. However, there is a bug in
the string parsing logic wherein it doesn't exclude the comma character
from the range of characters as it consumes them. This leads to an
out-of-bounds access given a sufficiently long list. For example:
> # echo 8,8,8,8 > /sys/bus/intel_th/devices/0-msc0/nr_pages
> ==================================================================
> BUG: KASAN: slab-out-of-bounds in memchr+0x1e/0x40
> Read of size 1 at addr ffff8803ffcebcd1 by task sh/825
>
> CPU: 3 PID: 825 Comm: npktest.sh Tainted: G W 4.20.0-rc1+
> Call Trace:
> dump_stack+0x7c/0xc0
> print_address_description+0x6c/0x23c
> ? memchr+0x1e/0x40
> kasan_report.cold.5+0x241/0x308
> memchr+0x1e/0x40
> nr_pages_store+0x203/0xd00 [intel_th_msu]
Fix this by accounting for the comma character.
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/msu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@@ -1418,7 +1418,8 @@ nr_pages_store(struct device *dev, struc
if (!end)
break;
- len -= end - p;
+ /* consume the number and the following comma, hence +1 */
+ len -= end - p + 1;
p = end + 1;
} while (len);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lubomir Rintel <[email protected]>
commit ed54ffbe554f0902689fd6d1712bbacbacd11376 upstream.
According to [1] and [2], the temperature values are in tenths of degree
Celsius. Exposing the Celsius value makes the battery appear on fire:
$ upower -i /org/freedesktop/UPower/devices/battery_olpc_battery
...
temperature: 236.9 degrees C
Tested on OLPC XO-1 and OLPC XO-1.75 laptops.
[1] include/linux/power_supply.h
[2] Documentation/power/power_supply_class.txt
Fixes: fb972873a767 ("[BATTERY] One Laptop Per Child power/battery driver")
Cc: [email protected]
Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/olpc_battery.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -427,14 +427,14 @@ static int olpc_bat_get_property(struct
if (ret)
return ret;
- val->intval = (s16)be16_to_cpu(ec_word) * 100 / 256;
+ val->intval = (s16)be16_to_cpu(ec_word) * 10 / 256;
break;
case POWER_SUPPLY_PROP_TEMP_AMBIENT:
ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
if (ret)
return ret;
- val->intval = (int)be16_to_cpu(ec_word) * 100 / 256;
+ val->intval = (int)be16_to_cpu(ec_word) * 10 / 256;
break;
case POWER_SUPPLY_PROP_CHARGE_COUNTER:
ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit f4351a199cc120ff9d59e06d02e8657d08e6cc46 upstream.
The parser for the processing unit reads bNrInPins field before the
bLength sanity check, which may lead to an out-of-bound access when a
malformed descriptor is given. Fix it by assignment after the bLength
check.
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1816,7 +1816,7 @@ static int build_audio_procunit(struct m
char *name)
{
struct uac_processing_unit_descriptor *desc = raw_desc;
- int num_ins = desc->bNrInPins;
+ int num_ins;
struct usb_mixer_elem_info *cval;
struct snd_kcontrol *kctl;
int i, err, nameid, type, len;
@@ -1831,7 +1831,13 @@ static int build_audio_procunit(struct m
0, NULL, default_value_info
};
- if (desc->bLength < 13 || desc->bLength < 13 + num_ins ||
+ if (desc->bLength < 13) {
+ usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
+ return -EINVAL;
+ }
+
+ num_ins = desc->bNrInPins;
+ if (desc->bLength < 13 + num_ins ||
desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) {
usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
return -EINVAL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 808153e1187fa77ac7d7dad261ff476888dcf398 upstream.
devm_memremap_pages() is a facility that can create struct page entries
for any arbitrary range and give drivers the ability to subvert core
aspects of page management.
Specifically the facility is tightly integrated with the kernel's memory
hotplug functionality. It injects an altmap argument deep into the
architecture specific vmemmap implementation to allow allocating from
specific reserved pages, and it has Linux specific assumptions about page
structure reference counting relative to get_user_pages() and
get_user_pages_fast(). It was an oversight and a mistake that this was
not marked EXPORT_SYMBOL_GPL from the outset.
Again, devm_memremap_pagex() exposes and relies upon core kernel internal
assumptions and will continue to evolve along with 'struct page', memory
hotplug, and support for new memory types / topologies. Only an in-kernel
GPL-only driver is expected to keep up with this ongoing evolution. This
interface, and functionality derived from this interface, is not suitable
for kernel-external drivers.
Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: "Jérôme Glisse" <[email protected]>
Cc: Balbir Singh <[email protected]>
Cc: Logan Gunthorpe <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/memremap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/memremap.c
+++ b/kernel/memremap.c
@@ -202,5 +202,5 @@ void *devm_memremap_pages(struct device
devres_add(dev, page_map);
return __va(res->start);
}
-EXPORT_SYMBOL(devm_memremap_pages);
+EXPORT_SYMBOL_GPL(devm_memremap_pages);
#endif /* CONFIG_ZONE_DEVICE */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 0b84304ef5da92add8dc75a1b07879c5374cdb05 upstream.
info->channel is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/pci/rme9652/hdsp.c:4100 snd_hdsp_channel_info() warn: potential spectre issue 'hdsp->channel_map' [r] (local cap)
Fix this by sanitizing info->channel before using it to index hdsp->channel_map
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
Also, notice that I refactored the code a bit in order to get rid of the
following checkpatch warning:
ERROR: do not use assignment in if condition
FILE: sound/pci/rme9652/hdsp.c:4103:
if ((mapped_channel = hdsp->channel_map[info->channel]) < 0)
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/rme9652/hdsp.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -30,6 +30,7 @@
#include <linux/math64.h>
#include <linux/vmalloc.h>
#include <linux/io.h>
+#include <linux/nospec.h>
#include <sound/core.h>
#include <sound/control.h>
@@ -4065,15 +4066,16 @@ static int snd_hdsp_channel_info(struct
struct snd_pcm_channel_info *info)
{
struct hdsp *hdsp = snd_pcm_substream_chip(substream);
- int mapped_channel;
+ unsigned int channel = info->channel;
- if (snd_BUG_ON(info->channel >= hdsp->max_channels))
+ if (snd_BUG_ON(channel >= hdsp->max_channels))
return -EINVAL;
+ channel = array_index_nospec(channel, hdsp->max_channels);
- if ((mapped_channel = hdsp->channel_map[info->channel]) < 0)
+ if (hdsp->channel_map[channel] < 0)
return -EINVAL;
- info->offset = mapped_channel * HDSP_CHANNEL_BUFFER_BYTES;
+ info->offset = hdsp->channel_map[channel] * HDSP_CHANNEL_BUFFER_BYTES;
info->first = 0;
info->step = 32;
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sameer Pujar <[email protected]>
commit 63d2a9ec310d8bcc955574220d4631aa55c1a80c upstream.
Even after disabling interrupts on the module, it could be possible
that irq handlers are still running. System hang is seen during
suspend path. It was found that, there were pending writes on the
HDA bus and clock was disabled by that time.
Above mentioned issue is fixed by clearing any pending irq handlers
before disabling clocks and returning from hda suspend.
Suggested-by: Mohan Kumar <[email protected]>
Suggested-by: Dara Ramesh <[email protected]>
Signed-off-by: Sameer Pujar <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_tegra.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -249,10 +249,12 @@ static int hda_tegra_suspend(struct devi
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
struct hda_tegra *hda = container_of(chip, struct hda_tegra, chip);
+ struct hdac_bus *bus = azx_bus(chip);
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
azx_stop_chip(chip);
+ synchronize_irq(bus->irq);
azx_enter_link_reset(chip);
hda_tegra_disable_clocks(hda);
On Fri, Jan 11, 2019 at 03:08:57PM +0100, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Stefan Hajnoczi <[email protected]>
>
> commit a72b69dc083a931422cc8a5e33841aff7d5312f2 upstream.
Sorry, this patch got stuck at the bottom of the stack as it didn't
apply and i forgot to delete it. It's not going to be part of the 4.4
tree.
thanks,
greg k-h
On Fri, Jan 11, 2019 at 09:25:39AM -0500, Mike Snitzer wrote:
> On Fri, Jan 11 2019 at 9:08am -0500,
> Greg Kroah-Hartman <[email protected]> wrote:
>
> > 4.4-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Ming Lei <[email protected]>
> >
> > commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
>
> Hi Greg,
>
> Please also pick up this commit:
> 89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
> impose device limits on bios")
That's going to be hard as the dependancy for that patch is not here in
4.4.y, and this patch itself isn't even in anything older than 4.19.y.
So why add it here to 4.4.y only?
Can you send the needed patch series to the stable@ mailing list for the
different stable trees if this needs to get into them?
thanks,
greg k-h
On Fri, Jan 11 2019 at 9:35am -0500,
Greg Kroah-Hartman <[email protected]> wrote:
> On Fri, Jan 11, 2019 at 09:25:39AM -0500, Mike Snitzer wrote:
> > On Fri, Jan 11 2019 at 9:08am -0500,
> > Greg Kroah-Hartman <[email protected]> wrote:
> >
> > > 4.4-stable review patch. If anyone has any objections, please let me know.
> > >
> > > ------------------
> > >
> > > From: Ming Lei <[email protected]>
> > >
> > > commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
> >
> > Hi Greg,
> >
> > Please also pick up this commit:
> > 89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
> > impose device limits on bios")
>
> That's going to be hard as the dependancy for that patch is not here in
> 4.4.y, and this patch itself isn't even in anything older than 4.19.y.
Right, I quickly replied to this thread with followup of the 3 prereq
patches needed to get 89f5fa47476 to apply.
> So why add it here to 4.4.y only?
Because you're looking to pull in a commit into 4.4 that causes problems
elsewhere.
> Can you send the needed patch series to the stable@ mailing list for the
> different stable trees if this needs to get into them?
I'll try to get to that, but it is low priority for me. And in the
meantime.. DM will be broken in 4.4 if you take 744889b7cb.. wheeeee.
Mike
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tyrel Datwyler <[email protected]>
[ Upstream commit 756af9c642329d54f048bac2a62f829b391f6944 ]
Commit 33a48ab105a7 ("ibmveth: Fix DMA unmap error") fixed an issue in the
normal code path of ibmveth_xmit_start() that was originally introduced by
Commit 6e8ab30ec677 ("ibmveth: Add scatter-gather support"). This original
fix missed the error path where dma_unmap_page is wrongly called on the
header portion in descs[0] which was mapped with dma_map_single. As a
result a failure to DMA map any of the frags results in a dmesg warning
when CONFIG_DMA_API_DEBUG is enabled.
------------[ cut here ]------------
DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function
[device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single]
WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10
...
<snip>
...
DMA-API: Mapped at:
ibmveth_start_xmit+0x30c/0xb60
dev_hard_start_xmit+0x100/0x450
sch_direct_xmit+0x224/0x490
__qdisc_run+0x20c/0x980
__dev_queue_xmit+0x1bc/0xf20
This fixes the API misuse by unampping descs[0] with dma_unmap_single.
Fixes: 6e8ab30ec677 ("ibmveth: Add scatter-gather support")
Signed-off-by: Tyrel Datwyler <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmveth.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1163,11 +1163,15 @@ out:
map_failed_frags:
last = i+1;
- for (i = 0; i < last; i++)
+ for (i = 1; i < last; i++)
dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
DMA_TO_DEVICE);
+ dma_unmap_single(&adapter->vdev->dev,
+ descs[0].fields.address,
+ descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK,
+ DMA_TO_DEVICE);
map_failed:
if (!firmware_has_feature(FW_FEATURE_CMO))
netdev_err(netdev, "tx: unable to map xmit buffer\n");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit fb24274546310872eeeaf3d1d53799d8414aa0f2 ]
syzbot reported the use of uninitialized udp6_addr::sin6_scope_id.
We can just set ::sin6_scope_id to zero, as tunnels are unlikely
to use an IPv6 address that needs a scope id and there is no
interface to bind in this context.
For net-next, it looks different as we have cfg->bind_ifindex there
so we can probably call ipv6_iface_scope_id().
Same for ::sin6_flowinfo, tunnels don't use it.
Fixes: 8024e02879dd ("udp: Add udp_sock_create for UDP tunnels to open listener socket")
Reported-by: [email protected]
Cc: Jon Maloy <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_udp_tunnel.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv6/ip6_udp_tunnel.c
+++ b/net/ipv6/ip6_udp_tunnel.c
@@ -15,7 +15,7 @@
int udp_sock_create6(struct net *net, struct udp_port_cfg *cfg,
struct socket **sockp)
{
- struct sockaddr_in6 udp6_addr;
+ struct sockaddr_in6 udp6_addr = {};
int err;
struct socket *sock = NULL;
@@ -42,6 +42,7 @@ int udp_sock_create6(struct net *net, st
goto error;
if (cfg->peer_udp_port) {
+ memset(&udp6_addr, 0, sizeof(udp6_addr));
udp6_addr.sin6_family = AF_INET6;
memcpy(&udp6_addr.sin6_addr, &cfg->peer_ip6,
sizeof(udp6_addr.sin6_addr));
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tore Anderson <[email protected]>
commit d57ec3c83b5153217a70b561d4fb6ed96f2f7a25 upstream.
The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem.
The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf
files included with the Windows driver. Attaching the option driver to it
doesn't result in a /dev/ttyUSB* device being created, so I've excluded it.
Note that it is also excluded for corresponding Huawei-branded devices, cf.
commit d544db293a44 ("USB: support new huawei devices in option.c").
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3
P: Vendor=03f0 ProdID=a31d Rev=01.02
S: Manufacturer=HP Inc.
S: Product=HP lt4132 LTE/HSPA+ 4G Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3
P: Vendor=03f0 ProdID=a31d Rev=01.02
S: Manufacturer=HP Inc.
S: Product=HP lt4132 LTE/HSPA+ 4G Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3
P: Vendor=03f0 ProdID=a31d Rev=01.02
S: Manufacturer=HP Inc.
S: Product=HP lt4132 LTE/HSPA+ 4G Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
Signed-off-by: Tore Anderson <[email protected]>
Cc: [email protected]
[ johan: drop id defines ]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1943,7 +1943,12 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) }, /* HP lt4132 (Huawei ME906s-158) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
On Fri, Jan 11, 2019 at 10:23:15AM -0500, Mike Snitzer wrote:
> On Fri, Jan 11 2019 at 10:17am -0500,
> Greg Kroah-Hartman <[email protected]> wrote:
>
> > On Fri, Jan 11, 2019 at 10:06:05AM -0500, Mike Snitzer wrote:
> > > On Fri, Jan 11 2019 at 9:35am -0500,
> > > Greg Kroah-Hartman <[email protected]> wrote:
> > >
> > > > On Fri, Jan 11, 2019 at 09:25:39AM -0500, Mike Snitzer wrote:
> > > > > On Fri, Jan 11 2019 at 9:08am -0500,
> > > > > Greg Kroah-Hartman <[email protected]> wrote:
> > > > >
> > > > > > 4.4-stable review patch. If anyone has any objections, please let me know.
> > > > > >
> > > > > > ------------------
> > > > > >
> > > > > > From: Ming Lei <[email protected]>
> > > > > >
> > > > > > commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 upstream.
> > > > >
> > > > > Hi Greg,
> > > > >
> > > > > Please also pick up this commit:
> > > > > 89f5fa47476eda56402e29fff3c5097f5c2a1e19 ("dm: call blk_queue_split() to
> > > > > impose device limits on bios")
> > > >
> > > > That's going to be hard as the dependancy for that patch is not here in
> > > > 4.4.y, and this patch itself isn't even in anything older than 4.19.y.
> > >
> > > Right, I quickly replied to this thread with followup of the 3 prereq
> > > patches needed to get 89f5fa47476 to apply.
> > >
> > > > So why add it here to 4.4.y only?
> > >
> > > Because you're looking to pull in a commit into 4.4 that causes problems
> > > elsewhere.
> > >
> > > > Can you send the needed patch series to the stable@ mailing list for the
> > > > different stable trees if this needs to get into them?
> > >
> > > I'll try to get to that, but it is low priority for me. And in the
> > > meantime.. DM will be broken in 4.4 if you take 744889b7cb.. wheeeee.
> >
> > Ok, then I should drop this patch from 4.4, I can do that. Looks like
> > it's not in 4.9 either, so that's another good reason to not take it
> > here as well.
> >
> > Any objection to just dropping it?
>
> I'd prefer that for sure. I don't think the empty discard issue that
> commit 744889b7cbb56a64f957e65ade7cb65fe3f35714 addresses is worth the
> other DM breakage. But I'm biased ;)
Ok, this was added because af097f5d199e ("block: break discard
submissions into the user defined size") was also wanting to be added to
the 4.4.y tree. And this commit was "supposed" to be fixing a problem
in that commit.
I guess we should just stick with what we have in 4.4.y for now, as
there hasn't been any complaints :)
I'll drop both of these now, thanks.
greg k-h
On 1/11/19 7:07 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.170 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jan 13 13:09:58 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.170-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regression.
thanks,
-- Shuah
On Fri, 11 Jan 2019 at 19:46, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.4.170 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jan 13 13:09:58 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.170-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.170-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 128af9be4733498f65f01b4eac6501cb09d412f5
git describe: v4.4.169-86-g128af9be4733
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.169-86-g128af9be4733
No regressions (compared to build v4.4.169)
No fixes (compared to build v4.4.169)
Ran 17041 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* install-android-platform-tools-r2600
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
Summary
------------------------------------------------------------------------
kernel: 4.4.170-rc2
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.170-rc2-hikey-20190111-350
git commit: d76407a74575c9f6e23490bd259d81ecdac141c6
git describe: 4.4.170-rc2-hikey-20190111-350
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.170-rc2-hikey-20190111-350
No regressions (compared to build 4.4.170-rc1-hikey-20190111-349)
No fixes (compared to build 4.4.170-rc1-hikey-20190111-349)
Ran 2756 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
- qemu_arm64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
--
Linaro LKFT
https://lkft.linaro.org
On 11 January 2019 7:37:29 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
>This is the start of the stable review cycle for the 4.4.170 release.
>There are 88 patches in this series, all will be posted as a response
>to this one. If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Sun Jan 13 13:09:58 UTC 2019.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.170-rc1.gz
>or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-4.4.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
Built and booted on the Pixel 2, no userspace or dmesg regressions.
--
Harsh Shandilya
PRJKT Development LLC
On Sat, Jan 12, 2019 at 08:27:35PM +0530, Harsh Shandilya wrote:
> On 11 January 2019 7:37:29 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >This is the start of the stable review cycle for the 4.4.170 release.
> >There are 88 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Jan 13 13:09:58 UTC 2019.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.170-rc1.gz
> >or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-4.4.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> Built and booted on the Pixel 2, no userspace or dmesg regressions.
Great, thanks for testing 2 of these and letting me know.
greg k-h
On 1/11/19 6:07 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.170 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jan 13 13:09:58 UTC 2019.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 281 pass: 281 fail: 0
Guenter