This controller appeared on Loongson-1 family MCUs
including Loongson-1B and Loongson-1C.
Signed-off-by: Jiaxun Yang <[email protected]>
---
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ls1x.c | 194 +++++++++++++++++++++++++++++++++++++
3 files changed, 204 insertions(+)
create mode 100644 drivers/irqchip/irq-ls1x.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..5dcb5456cd14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,15 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
endmenu
config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..7acd0e36d0b4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
+obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
new file mode 100644
index 000000000000..f8ca738ed25c
--- /dev/null
+++ b/drivers/irqchip/irq-ls1x.c
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019, Jiaxun Yang <[email protected]>
+ * Loongson-1 platform IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/io.h>
+
+#include <asm/mach-loongson32/irq.h>
+
+struct ls_intc_data {
+ void __iomem *base;
+ unsigned int chip;
+};
+
+#define MAX_CHIPS 5
+#define LS_REG_INTC_STATUS 0x00
+#define LS_REG_INTC_EN 0x04
+#define LS_REG_INTC_SET 0x08
+#define LS_REG_INTC_CLR 0x0c
+#define LS_REG_INTC_POL 0x10
+#define LS_REG_INTC_EDGE 0x14
+#define CHIP_SIZE 0x18
+
+static irqreturn_t intc_cascade(int irq, void *data)
+{
+ struct ls_intc_data *intc = irq_get_handler_data(irq);
+ uint32_t irq_reg;
+
+ irq_reg = readl(intc->base + (CHIP_SIZE * intc->chip)
+ + LS_REG_INTC_STATUS);
+ generic_handle_irq(__fls(irq_reg) + (intc->chip * 32) + LS1X_IRQ_BASE);
+
+ return IRQ_HANDLED;
+}
+
+static void ls_intc_set_bit(
+ struct irq_chip_generic *gc, unsigned int offset,
+ u32 mask, bool set)
+{
+ if (set)
+ writel(readl(gc->reg_base + offset) |
+ mask, gc->reg_base + offset);
+ else
+ writel(readl(gc->reg_base + offset) &
+ ~mask, gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ u32 mask = data->mask;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static struct irqaction intc_cascade_action = {
+ .handler = intc_cascade,
+ .name = "intc cascade interrupt",
+};
+
+static int __init ls_intc_of_init(struct device_node *node,
+ unsigned int num_chips)
+{
+ struct ls_intc_data *intc[MAX_CHIPS];
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct irq_domain *domain;
+ void __iomem *base;
+ int parent_irq[MAX_CHIPS], err = 0;
+ unsigned int i = 0;
+
+ base = of_iomap(node, 0);
+ if (!base)
+ return -ENODEV;
+
+ for (i = 0; i < num_chips; i++) {
+ /* Mask all irqs */
+ writel(0x0, base + (i * CHIP_SIZE) +
+ LS_REG_INTC_EN);
+
+ /* Set all irqs to high level triggered */
+ writel(0xffffffff, base + (i * CHIP_SIZE) +
+ LS_REG_INTC_POL);
+
+ intc[i] = kzalloc(sizeof(*intc[i]), GFP_KERNEL);
+ if (!intc[i]) {
+ err = -ENOMEM;
+ goto out_err;
+ }
+
+ intc[i]->base = base;
+ intc[i]->chip = i;
+
+ parent_irq[i] = irq_of_parse_and_map(node, i);
+ if (!parent_irq[i]) {
+ pr_warn("unable to get parent irq for irqchip %u", i);
+ kfree(intc[i]);
+ intc[i] = NULL;
+ err = -EINVAL;
+ goto out_err;
+ }
+
+ err = irq_set_handler_data(parent_irq[i], intc[i]);
+ if (err)
+ goto out_err;
+
+ gc = irq_alloc_generic_chip("INTC", 1,
+ LS1X_IRQ_BASE + (i * 32),
+ base + (i * CHIP_SIZE),
+ handle_level_irq);
+
+ ct = gc->chip_types;
+ ct->regs.mask = LS_REG_INTC_EN;
+ ct->regs.ack = LS_REG_INTC_CLR;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_set_type = ls_intc_set_type;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0,
+ IRQ_NOPROBE | IRQ_LEVEL);
+ }
+
+ domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!domain) {
+ pr_warn("unable to register IRQ domain\n");
+ err = -EINVAL;
+ goto out_err;
+ }
+
+ for (i = 0; i < num_chips; i++)
+ setup_irq(parent_irq[i], &intc_cascade_action);
+
+ return 0;
+
+out_err:
+ for (i = 0; i < MAX_CHIPS; i++) {
+ if (intc[i]) {
+ kfree(intc[i]);
+ irq_dispose_mapping(parent_irq[i]);
+ } else {
+ break;
+ }
+ }
+ return err;
+}
+
+static int __init intc_4chip_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return ls_intc_of_init(node, 4);
+}
+IRQCHIP_DECLARE(ls1b_intc, "loongson,ls1b-intc", intc_4chip_of_init);
+
+static int __init intc_5chip_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return ls_intc_of_init(node, 5);
+}
+IRQCHIP_DECLARE(ls1c_intc, "loongson,ls1c-intc", intc_5chip_of_init);
--
2.20.1
Dt-bindings doc about Loongson-1 interrupt controller
Signed-off-by: Jiaxun Yang <[email protected]>
---
.../loongson,ls1x-intc.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..afa8fec45f88
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,28 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-intc". Valid strings are:
+ loongson,ls1b-intc
+ loongson,ls1c-intc
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupts : Specifies the CPU interrupts the controller is connected to,
+ - For ls1b, it must have 4 interrupts.
+ - For ls1c, it must have 5 interrupts.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1c-intc";
+ reg = <0x1fd01040 0x78>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>, <4>, <5>, <6>;
+};
\ No newline at end of file
--
2.20.1
Dt-bindings doc about Loongson-1 interrupt controller
Signed-off-by: Jiaxun Yang <[email protected]>
---
.../loongson,ls1x-intc.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..afa8fec45f88
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,28 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-intc". Valid strings are:
+ loongson,ls1b-intc
+ loongson,ls1c-intc
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupts : Specifies the CPU interrupts the controller is connected to,
+ - For ls1b, it must have 4 interrupts.
+ - For ls1c, it must have 5 interrupts.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1c-intc";
+ reg = <0x1fd01040 0x78>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>, <4>, <5>, <6>;
+};
\ No newline at end of file
--
2.20.1
This controller appeared on Loongson-1 family MCUs
including Loongson-1B and Loongson-1C.
Signed-off-by: Jiaxun Yang <[email protected]>
---
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ls1x.c | 194 +++++++++++++++++++++++++++++++++++++
3 files changed, 204 insertions(+)
create mode 100644 drivers/irqchip/irq-ls1x.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..5dcb5456cd14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,15 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
endmenu
config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..7acd0e36d0b4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
+obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
new file mode 100644
index 000000000000..b15b01237830
--- /dev/null
+++ b/drivers/irqchip/irq-ls1x.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Jiaxun Yang <[email protected]>
+ * Loongson-1 platform IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+#include <asm/mach-loongson32/irq.h>
+
+struct ls_intc_data {
+ void __iomem *base;
+ unsigned int chip;
+};
+
+#define MAX_CHIPS 5
+#define LS_REG_INTC_STATUS 0x00
+#define LS_REG_INTC_EN 0x04
+#define LS_REG_INTC_SET 0x08
+#define LS_REG_INTC_CLR 0x0c
+#define LS_REG_INTC_POL 0x10
+#define LS_REG_INTC_EDGE 0x14
+#define CHIP_SIZE 0x18
+
+static irqreturn_t intc_cascade(int irq, void *data)
+{
+ struct ls_intc_data *intc = irq_get_handler_data(irq);
+ uint32_t irq_reg;
+
+ irq_reg = readl(intc->base + (CHIP_SIZE * intc->chip)
+ + LS_REG_INTC_STATUS);
+ generic_handle_irq(__fls(irq_reg) + (intc->chip * 32) + LS1X_IRQ_BASE);
+
+ return IRQ_HANDLED;
+}
+
+static void ls_intc_set_bit(
+ struct irq_chip_generic *gc, unsigned int offset,
+ u32 mask, bool set)
+{
+ if (set)
+ writel(readl(gc->reg_base + offset) |
+ mask, gc->reg_base + offset);
+ else
+ writel(readl(gc->reg_base + offset) &
+ ~mask, gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ u32 mask = data->mask;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static struct irqaction intc_cascade_action = {
+ .handler = intc_cascade,
+ .name = "intc cascade interrupt",
+};
+
+static int __init ls_intc_of_init(struct device_node *node,
+ unsigned int num_chips)
+{
+ struct ls_intc_data *intc[MAX_CHIPS];
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct irq_domain *domain;
+ void __iomem *base;
+ int parent_irq[MAX_CHIPS], err = 0;
+ unsigned int i = 0;
+
+ base = of_iomap(node, 0);
+ if (!base)
+ return -ENODEV;
+
+ for (i = 0; i < num_chips; i++) {
+ /* Mask all irqs */
+ writel(0x0, base + (i * CHIP_SIZE) +
+ LS_REG_INTC_EN);
+
+ /* Set all irqs to high level triggered */
+ writel(0xffffffff, base + (i * CHIP_SIZE) +
+ LS_REG_INTC_POL);
+
+ intc[i] = kzalloc(sizeof(*intc[i]), GFP_KERNEL);
+ if (!intc[i]) {
+ err = -ENOMEM;
+ goto out_err;
+ }
+
+ intc[i]->base = base;
+ intc[i]->chip = i;
+
+ parent_irq[i] = irq_of_parse_and_map(node, i);
+ if (!parent_irq[i]) {
+ pr_warn("unable to get parent irq for irqchip %u", i);
+ kfree(intc[i]);
+ intc[i] = NULL;
+ err = -EINVAL;
+ goto out_err;
+ }
+
+ err = irq_set_handler_data(parent_irq[i], intc[i]);
+ if (err)
+ goto out_err;
+
+ gc = irq_alloc_generic_chip("INTC", 1,
+ LS1X_IRQ_BASE + (i * 32),
+ base + (i * CHIP_SIZE),
+ handle_level_irq);
+
+ ct = gc->chip_types;
+ ct->regs.mask = LS_REG_INTC_EN;
+ ct->regs.ack = LS_REG_INTC_CLR;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_set_type = ls_intc_set_type;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0,
+ IRQ_NOPROBE | IRQ_LEVEL);
+ }
+
+ domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!domain) {
+ pr_warn("unable to register IRQ domain\n");
+ err = -EINVAL;
+ goto out_err;
+ }
+
+ for (i = 0; i < num_chips; i++)
+ setup_irq(parent_irq[i], &intc_cascade_action);
+
+ return 0;
+
+out_err:
+ for (i = 0; i < MAX_CHIPS; i++) {
+ if (intc[i]) {
+ kfree(intc[i]);
+ irq_dispose_mapping(parent_irq[i]);
+ } else {
+ break;
+ }
+ }
+ return err;
+}
+
+static int __init intc_4chip_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return ls_intc_of_init(node, 4);
+}
+IRQCHIP_DECLARE(ls1b_intc, "loongson,ls1b-intc", intc_4chip_of_init);
+
+static int __init intc_5chip_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return ls_intc_of_init(node, 5);
+}
+IRQCHIP_DECLARE(ls1c_intc, "loongson,ls1c-intc", intc_5chip_of_init);
--
2.20.1
Hi Jiaxun,
On Wed, 23 Jan 2019 06:23:36 +0000,
Jiaxun Yang <[email protected]> wrote:
>
> This controller appeared on Loongson-1 family MCUs
> including Loongson-1B and Loongson-1C.
>
> Signed-off-by: Jiaxun Yang <[email protected]>
> ---
> drivers/irqchip/Kconfig | 9 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-ls1x.c | 194 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 204 insertions(+)
> create mode 100644 drivers/irqchip/irq-ls1x.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 3d1e60779078..5dcb5456cd14 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -406,6 +406,15 @@ config IMX_IRQSTEER
> help
> Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
>
> +config LS1X_IRQ
> + bool "Loongson-1 Interrupt Controller"
> + depends on MACH_LOONGSON32
> + default y
> + select IRQ_DOMAIN
> + select GENERIC_IRQ_CHIP
> + help
> + Support for the Loongson-1 platform Interrupt Controller.
> +
> endmenu
>
> config SIFIVE_PLIC
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index c93713d24b86..7acd0e36d0b4 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
> +obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
> diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
> new file mode 100644
> index 000000000000..b15b01237830
> --- /dev/null
> +++ b/drivers/irqchip/irq-ls1x.c
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019, Jiaxun Yang <[email protected]>
> + * Loongson-1 platform IRQ support
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/ioport.h>
> +#include <linux/irqchip.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/io.h>
> +
> +#include <asm/mach-loongson32/irq.h>
> +
> +struct ls_intc_data {
> + void __iomem *base;
> + unsigned int chip;
> +};
> +
> +#define MAX_CHIPS 5
> +#define LS_REG_INTC_STATUS 0x00
> +#define LS_REG_INTC_EN 0x04
> +#define LS_REG_INTC_SET 0x08
> +#define LS_REG_INTC_CLR 0x0c
> +#define LS_REG_INTC_POL 0x10
> +#define LS_REG_INTC_EDGE 0x14
> +#define CHIP_SIZE 0x18
> +
> +static irqreturn_t intc_cascade(int irq, void *data)
> +{
> + struct ls_intc_data *intc = irq_get_handler_data(irq);
> + uint32_t irq_reg;
> +
> + irq_reg = readl(intc->base + (CHIP_SIZE * intc->chip)
> + + LS_REG_INTC_STATUS);
> + generic_handle_irq(__fls(irq_reg) + (intc->chip * 32) + LS1X_IRQ_BASE);
> +
> + return IRQ_HANDLED;
> +}
No. A chained interrupt is not a dealt with as a normal interrupt, as
it is a flow handler itself.
> +
> +static void ls_intc_set_bit(
> + struct irq_chip_generic *gc, unsigned int offset,
Please put the first parameter on the same line as the function name.
> + u32 mask, bool set)
> +{
> + if (set)
> + writel(readl(gc->reg_base + offset) |
> + mask, gc->reg_base + offset);
Put "mask" on the same line as the rest of the expression.
> + else
> + writel(readl(gc->reg_base + offset) &
> + ~mask, gc->reg_base + offset);
Same here.
> +}
> +
> +static int ls_intc_set_type(struct irq_data *data, unsigned int type)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
> + u32 mask = data->mask;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
> + break;
> + case IRQ_TYPE_NONE:
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +
> +static struct irqaction intc_cascade_action = {
> + .handler = intc_cascade,
> + .name = "intc cascade interrupt",
> +};
> +
> +static int __init ls_intc_of_init(struct device_node *node,
> + unsigned int num_chips)
> +{
> + struct ls_intc_data *intc[MAX_CHIPS];
> + struct irq_chip_generic *gc;
> + struct irq_chip_type *ct;
> + struct irq_domain *domain;
> + void __iomem *base;
> + int parent_irq[MAX_CHIPS], err = 0;
Initialise both arrays so that you can simplify error handling.
> + unsigned int i = 0;
> +
> + base = of_iomap(node, 0);
> + if (!base)
> + return -ENODEV;
> +
> + for (i = 0; i < num_chips; i++) {
> + /* Mask all irqs */
> + writel(0x0, base + (i * CHIP_SIZE) +
> + LS_REG_INTC_EN);
> +
> + /* Set all irqs to high level triggered */
> + writel(0xffffffff, base + (i * CHIP_SIZE) +
> + LS_REG_INTC_POL);
> +
> + intc[i] = kzalloc(sizeof(*intc[i]), GFP_KERNEL);
> + if (!intc[i]) {
> + err = -ENOMEM;
> + goto out_err;
> + }
> +
> + intc[i]->base = base;
> + intc[i]->chip = i;
> +
> + parent_irq[i] = irq_of_parse_and_map(node, i);
> + if (!parent_irq[i]) {
> + pr_warn("unable to get parent irq for irqchip %u", i);
> + kfree(intc[i]);
> + intc[i] = NULL;
> + err = -EINVAL;
You're making life very complicated for yourself. Just set err and
branch to the error handler.
> + goto out_err;
> + }
> +
> + err = irq_set_handler_data(parent_irq[i], intc[i]);
> + if (err)
> + goto out_err;
> +
> + gc = irq_alloc_generic_chip("INTC", 1,
> + LS1X_IRQ_BASE + (i * 32),
> + base + (i * CHIP_SIZE),
> + handle_level_irq);
> +
> + ct = gc->chip_types;
> + ct->regs.mask = LS_REG_INTC_EN;
> + ct->regs.ack = LS_REG_INTC_CLR;
> + ct->chip.irq_unmask = irq_gc_mask_set_bit;
> + ct->chip.irq_mask = irq_gc_mask_clr_bit;
> + ct->chip.irq_ack = irq_gc_ack_set_bit;
> + ct->chip.irq_set_type = ls_intc_set_type;
> +
> + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0,
> + IRQ_NOPROBE | IRQ_LEVEL);
> + }
> +
> + domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
> + &irq_domain_simple_ops, NULL);
> + if (!domain) {
> + pr_warn("unable to register IRQ domain\n");
> + err = -EINVAL;
> + goto out_err;
> + }
> +
> + for (i = 0; i < num_chips; i++)
> + setup_irq(parent_irq[i], &intc_cascade_action);
This is not how we do things anymore (some of this code feels like it
has escaped from a 2.2 kernel). See irq_set_chained_handler, and use
that to properly configure your cascades. There are tons of example in
the tree.
> +
> + return 0;
> +
> +out_err:
> + for (i = 0; i < MAX_CHIPS; i++) {
> + if (intc[i]) {
> + kfree(intc[i]);
> + irq_dispose_mapping(parent_irq[i]);
> + } else {
> + break;
> + }
> + }
for (i = 0; i < MAX_CHIPS; i++) {
kfree(intc[i]);
if (parent_irq[i])
irq_dispose_mapping(parent_irq[i]);
}
> + return err;
> +}
> +
> +static int __init intc_4chip_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + return ls_intc_of_init(node, 4);
> +}
> +IRQCHIP_DECLARE(ls1b_intc, "loongson,ls1b-intc", intc_4chip_of_init);
> +
> +static int __init intc_5chip_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + return ls_intc_of_init(node, 5);
> +}
> +IRQCHIP_DECLARE(ls1c_intc, "loongson,ls1c-intc", intc_5chip_of_init);
Do you really need this distinction? You could easily find out how
many interrupts you have based on the DT, right? OR do you need this
for anything else?
Thanks,
M.
--
Jazz is not dead, it just smell funny.
v1->v2: Fix SPDX-License-Identifier
v2->v3: Rework according suggestions from Marc Zyngier, Thanks.
This controller appeared on Loongson-1 family MCUs
including Loongson-1B and Loongson-1C.
Signed-off-by: Jiaxun Yang <[email protected]>
---
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ls1x.c | 176 +++++++++++++++++++++++++++++++++++++
3 files changed, 186 insertions(+)
create mode 100644 drivers/irqchip/irq-ls1x.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..5dcb5456cd14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,15 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
endmenu
config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..7acd0e36d0b4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
+obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
new file mode 100644
index 000000000000..de92ca04cf9f
--- /dev/null
+++ b/drivers/irqchip/irq-ls1x.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Jiaxun Yang <[email protected]>
+ * Loongson-1 platform IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+
+#include <asm/mach-loongson32/irq.h>
+
+
+#define MAX_CHIPS 5
+#define LS_REG_INTC_STATUS 0x00
+#define LS_REG_INTC_EN 0x04
+#define LS_REG_INTC_SET 0x08
+#define LS_REG_INTC_CLR 0x0c
+#define LS_REG_INTC_POL 0x10
+#define LS_REG_INTC_EDGE 0x14
+#define CHIP_SIZE 0x18
+
+static void ls_chained_handle_irq(struct irq_desc *desc)
+{
+ struct irq_chip_generic *gc = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ u32 pending;
+
+ chained_irq_enter(chip, desc);
+ pending = readl(gc->reg_base + LS_REG_INTC_STATUS) &
+ readl(gc->reg_base + LS_REG_INTC_EN);
+
+ if (!pending) {
+ spurious_interrupt();
+ chained_irq_exit(chip, desc);
+ return;
+ }
+
+ while (pending) {
+ int bit = __ffs(pending);
+
+ generic_handle_irq(gc->irq_base + bit);
+ pending &= ~BIT(bit);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void ls_intc_set_bit(struct irq_chip_generic *gc,
+ unsigned int offset,
+ u32 mask, bool set)
+{
+ if (set)
+ writel(readl(gc->reg_base + offset) | mask,
+ gc->reg_base + offset);
+ else
+ writel(readl(gc->reg_base + offset) & ~mask,
+ gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ u32 mask = data->mask;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int __init ls_intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_chip_generic *gc[MAX_CHIPS];
+ struct irq_chip_type *ct;
+ struct irq_domain *domain;
+ void __iomem *base;
+ int parent_irq[MAX_CHIPS], err = 0;
+ unsigned int i = 0;
+
+ unsigned int num_chips = of_irq_count(node);
+
+ base = of_iomap(node, 0);
+ if (!base)
+ return -ENODEV;
+
+ for (i = 0; i < num_chips; i++) {
+ /* Mask all irqs */
+ writel(0x0, base + (i * CHIP_SIZE) +
+ LS_REG_INTC_EN);
+
+ /* Set all irqs to high level triggered */
+ writel(0xffffffff, base + (i * CHIP_SIZE) +
+ LS_REG_INTC_POL);
+
+ parent_irq[i] = irq_of_parse_and_map(node, i);
+
+ if (!parent_irq[i]) {
+ pr_warn("unable to get parent irq for irqchip %u\n", i);
+ goto out_err;
+ }
+
+ gc[i] = irq_alloc_generic_chip("INTC", 1,
+ LS1X_IRQ_BASE + (i * 32),
+ base + (i * CHIP_SIZE),
+ handle_level_irq);
+
+ ct = gc[i]->chip_types;
+ ct->regs.mask = LS_REG_INTC_EN;
+ ct->regs.ack = LS_REG_INTC_CLR;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_set_type = ls_intc_set_type;
+
+ irq_setup_generic_chip(gc[i], IRQ_MSK(32), 0, 0,
+ IRQ_NOPROBE | IRQ_LEVEL);
+ }
+
+ domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!domain) {
+ pr_warn("unable to register IRQ domain\n");
+ err = -EINVAL;
+ goto out_err;
+ }
+
+ for (i = 0; i < num_chips; i++)
+ irq_set_chained_handler_and_data(parent_irq[i],
+ ls_chained_handle_irq, gc[i]);
+
+ pr_info("ls1x-irq: %u chips registered\n", num_chips);
+
+ return 0;
+
+out_err:
+ for (i = 0; i < MAX_CHIPS; i++) {
+ if (gc[i])
+ irq_destroy_generic_chip(gc[i], IRQ_MSK(32),
+ IRQ_NOPROBE | IRQ_LEVEL, 0);
+ if (parent_irq[i])
+ irq_dispose_mapping(parent_irq[i]);
+ }
+ return err;
+}
+
+IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls_intc_of_init);
--
2.20.1
Dt-bindings doc about Loongson-1 interrupt controller
Signed-off-by: Jiaxun Yang <[email protected]>
---
.../loongson,ls1x-intc.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..a4e17c3f5f93
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,24 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "loongson,ls1x-intc". Valid strings are:
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupts : Specifies the CPU interrupts the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x78>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>, <4>, <5>, <6>;
+};
\ No newline at end of file
--
2.20.1
On Thu, 24 Jan 2019 03:27:29 +0000,
Jiaxun Yang <[email protected]> wrote:
>
> This controller appeared on Loongson-1 family MCUs
> including Loongson-1B and Loongson-1C.
>
> Signed-off-by: Jiaxun Yang <[email protected]>
> ---
> drivers/irqchip/Kconfig | 9 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-ls1x.c | 176 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 186 insertions(+)
> create mode 100644 drivers/irqchip/irq-ls1x.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 3d1e60779078..5dcb5456cd14 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -406,6 +406,15 @@ config IMX_IRQSTEER
> help
> Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
>
> +config LS1X_IRQ
> + bool "Loongson-1 Interrupt Controller"
> + depends on MACH_LOONGSON32
> + default y
> + select IRQ_DOMAIN
> + select GENERIC_IRQ_CHIP
> + help
> + Support for the Loongson-1 platform Interrupt Controller.
> +
> endmenu
>
> config SIFIVE_PLIC
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index c93713d24b86..7acd0e36d0b4 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
> +obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
> diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
> new file mode 100644
> index 000000000000..de92ca04cf9f
> --- /dev/null
> +++ b/drivers/irqchip/irq-ls1x.c
> @@ -0,0 +1,176 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019, Jiaxun Yang <[email protected]>
> + * Loongson-1 platform IRQ support
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/ioport.h>
> +#include <linux/irqchip.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/io.h>
> +#include <linux/irqchip/chained_irq.h>
> +
> +#include <asm/mach-loongson32/irq.h>
> +
> +
> +#define MAX_CHIPS 5
> +#define LS_REG_INTC_STATUS 0x00
> +#define LS_REG_INTC_EN 0x04
> +#define LS_REG_INTC_SET 0x08
> +#define LS_REG_INTC_CLR 0x0c
> +#define LS_REG_INTC_POL 0x10
> +#define LS_REG_INTC_EDGE 0x14
> +#define CHIP_SIZE 0x18
> +
> +static void ls_chained_handle_irq(struct irq_desc *desc)
> +{
> + struct irq_chip_generic *gc = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + u32 pending;
> +
> + chained_irq_enter(chip, desc);
> + pending = readl(gc->reg_base + LS_REG_INTC_STATUS) &
> + readl(gc->reg_base + LS_REG_INTC_EN);
> +
> + if (!pending) {
> + spurious_interrupt();
> + chained_irq_exit(chip, desc);
> + return;
> + }
Given the context, this is the same as writing:
if (!pending)
spurious_interrupt();
and let it go through.
> +
> + while (pending) {
> + int bit = __ffs(pending);
> +
> + generic_handle_irq(gc->irq_base + bit);
> + pending &= ~BIT(bit);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void ls_intc_set_bit(struct irq_chip_generic *gc,
> + unsigned int offset,
> + u32 mask, bool set)
> +{
> + if (set)
> + writel(readl(gc->reg_base + offset) | mask,
> + gc->reg_base + offset);
> + else
> + writel(readl(gc->reg_base + offset) & ~mask,
> + gc->reg_base + offset);
> +}
> +
> +static int ls_intc_set_type(struct irq_data *data, unsigned int type)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
> + u32 mask = data->mask;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
> + break;
> + case IRQ_TYPE_NONE:
> + break;
> + default:
> + return -EINVAL;
> + }
I just realised that in your DT binding, you define the interrupt
specifier as having a single cell. Which means that you never describe
the interrupt trigger there. Why?
Does it mean that all the drivers have to configure their interrupt
trigger themselves, and cannot rely on DT to do it? This seems quite
backward.
> +
> + return 0;
> +}
> +
> +
> +static int __init ls_intc_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_chip_generic *gc[MAX_CHIPS];
> + struct irq_chip_type *ct;
> + struct irq_domain *domain;
> + void __iomem *base;
> + int parent_irq[MAX_CHIPS], err = 0;
> + unsigned int i = 0;
> +
> + unsigned int num_chips = of_irq_count(node);
> +
> + base = of_iomap(node, 0);
> + if (!base)
> + return -ENODEV;
> +
> + for (i = 0; i < num_chips; i++) {
> + /* Mask all irqs */
> + writel(0x0, base + (i * CHIP_SIZE) +
> + LS_REG_INTC_EN);
> +
> + /* Set all irqs to high level triggered */
> + writel(0xffffffff, base + (i * CHIP_SIZE) +
> + LS_REG_INTC_POL);
> +
> + parent_irq[i] = irq_of_parse_and_map(node, i);
> +
> + if (!parent_irq[i]) {
> + pr_warn("unable to get parent irq for irqchip %u\n", i);
> + goto out_err;
> + }
> +
> + gc[i] = irq_alloc_generic_chip("INTC", 1,
> + LS1X_IRQ_BASE + (i * 32),
> + base + (i * CHIP_SIZE),
> + handle_level_irq);
> +
> + ct = gc[i]->chip_types;
> + ct->regs.mask = LS_REG_INTC_EN;
> + ct->regs.ack = LS_REG_INTC_CLR;
> + ct->chip.irq_unmask = irq_gc_mask_set_bit;
> + ct->chip.irq_mask = irq_gc_mask_clr_bit;
> + ct->chip.irq_ack = irq_gc_ack_set_bit;
> + ct->chip.irq_set_type = ls_intc_set_type;
> +
> + irq_setup_generic_chip(gc[i], IRQ_MSK(32), 0, 0,
> + IRQ_NOPROBE | IRQ_LEVEL);
> + }
> +
> + domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
> + &irq_domain_simple_ops, NULL);
Why a legacy domain? This is usually reserved to old drivers that are
converted to a new infrastructure, while needing some form of platform
hacks. I don't see this being the case here.
It is also worrying that although you have up to 5 irqchips, they all
share a single domain. What does this mean? each irqchip is expected
to have its own domain.
> + if (!domain) {
> + pr_warn("unable to register IRQ domain\n");
> + err = -EINVAL;
> + goto out_err;
> + }
> +
> + for (i = 0; i < num_chips; i++)
> + irq_set_chained_handler_and_data(parent_irq[i],
> + ls_chained_handle_irq, gc[i]);
> +
> + pr_info("ls1x-irq: %u chips registered\n", num_chips);
> +
> + return 0;
> +
> +out_err:
> + for (i = 0; i < MAX_CHIPS; i++) {
> + if (gc[i])
But you've never initialised gc[], nor parent_irq[]. So you'll get
whatever the stack had at this point. Not great.
> + irq_destroy_generic_chip(gc[i], IRQ_MSK(32),
> + IRQ_NOPROBE | IRQ_LEVEL, 0);
> + if (parent_irq[i])
> + irq_dispose_mapping(parent_irq[i]);
> + }
> + return err;
> +}
> +
> +IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls_intc_of_init);
> --
> 2.20.1
>
Thanks,
M.
--
Jazz is not dead, it just smell funny.
Hi Marc
Thanks for your suggestions, I'm working on v4 and I would like to ask
if it is better to have a driver for only one irqchip
and create dt nodes for each chip, or just register all the chips in a
single driver with only one dt node.
?? 2019/1/24 ????5:54, Marc Zyngier д??:
> On Thu, 24 Jan 2019 03:27:29 +0000,
> Jiaxun Yang <[email protected]> wrote:
>> This controller appeared on Loongson-1 family MCUs
>> including Loongson-1B and Loongson-1C.
>>
>> Signed-off-by: Jiaxun Yang <[email protected]>
>> ---
>> drivers/irqchip/Kconfig | 9 ++
>> drivers/irqchip/Makefile | 1 +
>> drivers/irqchip/irq-ls1x.c | 176 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 186 insertions(+)
>> create mode 100644 drivers/irqchip/irq-ls1x.c
>>
>> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
>> index 3d1e60779078..5dcb5456cd14 100644
>> --- a/drivers/irqchip/Kconfig
>> +++ b/drivers/irqchip/Kconfig
>> @@ -406,6 +406,15 @@ config IMX_IRQSTEER
>> help
>> Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
>>
>> +config LS1X_IRQ
>> + bool "Loongson-1 Interrupt Controller"
>> + depends on MACH_LOONGSON32
>> + default y
>> + select IRQ_DOMAIN
>> + select GENERIC_IRQ_CHIP
>> + help
>> + Support for the Loongson-1 platform Interrupt Controller.
>> +
>> endmenu
>>
>> config SIFIVE_PLIC
>> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
>> index c93713d24b86..7acd0e36d0b4 100644
>> --- a/drivers/irqchip/Makefile
>> +++ b/drivers/irqchip/Makefile
>> @@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
>> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
>> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
>> obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
>> +obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
>> diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
>> new file mode 100644
>> index 000000000000..de92ca04cf9f
>> --- /dev/null
>> +++ b/drivers/irqchip/irq-ls1x.c
>> @@ -0,0 +1,176 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2019, Jiaxun Yang <[email protected]>
>> + * Loongson-1 platform IRQ support
>> + */
>> +
>> +#include <linux/errno.h>
>> +#include <linux/init.h>
>> +#include <linux/types.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/ioport.h>
>> +#include <linux/irqchip.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/io.h>
>> +#include <linux/irqchip/chained_irq.h>
>> +
>> +#include <asm/mach-loongson32/irq.h>
>> +
>> +
>> +#define MAX_CHIPS 5
>> +#define LS_REG_INTC_STATUS 0x00
>> +#define LS_REG_INTC_EN 0x04
>> +#define LS_REG_INTC_SET 0x08
>> +#define LS_REG_INTC_CLR 0x0c
>> +#define LS_REG_INTC_POL 0x10
>> +#define LS_REG_INTC_EDGE 0x14
>> +#define CHIP_SIZE 0x18
>> +
>> +static void ls_chained_handle_irq(struct irq_desc *desc)
>> +{
>> + struct irq_chip_generic *gc = irq_desc_get_handler_data(desc);
>> + struct irq_chip *chip = irq_desc_get_chip(desc);
>> + u32 pending;
>> +
>> + chained_irq_enter(chip, desc);
>> + pending = readl(gc->reg_base + LS_REG_INTC_STATUS) &
>> + readl(gc->reg_base + LS_REG_INTC_EN);
>> +
>> + if (!pending) {
>> + spurious_interrupt();
>> + chained_irq_exit(chip, desc);
>> + return;
>> + }
> Given the context, this is the same as writing:
>
> if (!pending)
> spurious_interrupt();
>
> and let it go through.
>
>> +
>> + while (pending) {
>> + int bit = __ffs(pending);
>> +
>> + generic_handle_irq(gc->irq_base + bit);
>> + pending &= ~BIT(bit);
>> + }
>> +
>> + chained_irq_exit(chip, desc);
>> +}
>> +
>> +static void ls_intc_set_bit(struct irq_chip_generic *gc,
>> + unsigned int offset,
>> + u32 mask, bool set)
>> +{
>> + if (set)
>> + writel(readl(gc->reg_base + offset) | mask,
>> + gc->reg_base + offset);
>> + else
>> + writel(readl(gc->reg_base + offset) & ~mask,
>> + gc->reg_base + offset);
>> +}
>> +
>> +static int ls_intc_set_type(struct irq_data *data, unsigned int type)
>> +{
>> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
>> + u32 mask = data->mask;
>> +
>> + switch (type) {
>> + case IRQ_TYPE_LEVEL_HIGH:
>> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
>> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
>> + break;
>> + case IRQ_TYPE_LEVEL_LOW:
>> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
>> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
>> + break;
>> + case IRQ_TYPE_EDGE_RISING:
>> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
>> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
>> + break;
>> + case IRQ_TYPE_EDGE_FALLING:
>> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
>> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
>> + break;
>> + case IRQ_TYPE_NONE:
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
> I just realised that in your DT binding, you define the interrupt
> specifier as having a single cell. Which means that you never describe
> the interrupt trigger there. Why?
>
> Does it mean that all the drivers have to configure their interrupt
> trigger themselves, and cannot rely on DT to do it? This seems quite
> backward.
My fault, will fix it later.
>
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static int __init ls_intc_of_init(struct device_node *node,
>> + struct device_node *parent)
>> +{
>> + struct irq_chip_generic *gc[MAX_CHIPS];
>> + struct irq_chip_type *ct;
>> + struct irq_domain *domain;
>> + void __iomem *base;
>> + int parent_irq[MAX_CHIPS], err = 0;
>> + unsigned int i = 0;
>> +
>> + unsigned int num_chips = of_irq_count(node);
>> +
>> + base = of_iomap(node, 0);
>> + if (!base)
>> + return -ENODEV;
>> +
>> + for (i = 0; i < num_chips; i++) {
>> + /* Mask all irqs */
>> + writel(0x0, base + (i * CHIP_SIZE) +
>> + LS_REG_INTC_EN);
>> +
>> + /* Set all irqs to high level triggered */
>> + writel(0xffffffff, base + (i * CHIP_SIZE) +
>> + LS_REG_INTC_POL);
>> +
>> + parent_irq[i] = irq_of_parse_and_map(node, i);
>> +
>> + if (!parent_irq[i]) {
>> + pr_warn("unable to get parent irq for irqchip %u\n", i);
>> + goto out_err;
>> + }
>> +
>> + gc[i] = irq_alloc_generic_chip("INTC", 1,
>> + LS1X_IRQ_BASE + (i * 32),
>> + base + (i * CHIP_SIZE),
>> + handle_level_irq);
>> +
>> + ct = gc[i]->chip_types;
>> + ct->regs.mask = LS_REG_INTC_EN;
>> + ct->regs.ack = LS_REG_INTC_CLR;
>> + ct->chip.irq_unmask = irq_gc_mask_set_bit;
>> + ct->chip.irq_mask = irq_gc_mask_clr_bit;
>> + ct->chip.irq_ack = irq_gc_ack_set_bit;
>> + ct->chip.irq_set_type = ls_intc_set_type;
>> +
>> + irq_setup_generic_chip(gc[i], IRQ_MSK(32), 0, 0,
>> + IRQ_NOPROBE | IRQ_LEVEL);
>> + }
>> +
>> + domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
>> + &irq_domain_simple_ops, NULL);
> Why a legacy domain? This is usually reserved to old drivers that are
> converted to a new infrastructure, while needing some form of platform
> hacks. I don't see this being the case here.
>
> It is also worrying that although you have up to 5 irqchips, they all
> share a single domain. What does this mean? each irqchip is expected
> to have its own domain.
Yes, I do like this for backward compatible reason. I'm turning
a legacy platform device mach(arch/mips/loongson32) in to
dt based generic mach and I would like to do it step by step rather than
one time.
So I use legacy domain in order to keep IRQ same with the
old driver exist on arch/mips/loongson32/common/irq.c
>> + if (!domain) {
>> + pr_warn("unable to register IRQ domain\n");
>> + err = -EINVAL;
>> + goto out_err;
>> + }
>> +
>> + for (i = 0; i < num_chips; i++)
>> + irq_set_chained_handler_and_data(parent_irq[i],
>> + ls_chained_handle_irq, gc[i]);
>> +
>> + pr_info("ls1x-irq: %u chips registered\n", num_chips);
>> +
>> + return 0;
>> +
>> +out_err:
>> + for (i = 0; i < MAX_CHIPS; i++) {
>> + if (gc[i])
> But you've never initialised gc[], nor parent_irq[]. So you'll get
> whatever the stack had at this point. Not great.
>
>> + irq_destroy_generic_chip(gc[i], IRQ_MSK(32),
>> + IRQ_NOPROBE | IRQ_LEVEL, 0);
>> + if (parent_irq[i])
>> + irq_dispose_mapping(parent_irq[i]);
>> + }
>> + return err;
>> +}
>> +
>> +IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls_intc_of_init);
>> --
>> 2.20.1
>>
> Thanks,
>
> M.
>
On Fri, 25 Jan 2019 10:56:33 +0000,
Jiaxun Yang <[email protected]> wrote:
>
> Hi Marc
>
> Thanks for your suggestions, I'm working on v4 and I would like to
> ask if it is better to have a driver for only one irqchip and create
> dt nodes for each chip, or just register all the chips in a single
> driver with only one dt node.
It would make more sense to have a node per chip, meaning that you
end-up with one instance per chip as well. It won't make the driver
much more complicated.
[...]
> >> + domain = irq_domain_add_legacy(node, num_chips * 32, LS1X_IRQ_BASE, 0,
> >> + &irq_domain_simple_ops, NULL);
> > Why a legacy domain? This is usually reserved to old drivers that are
> > converted to a new infrastructure, while needing some form of platform
> > hacks. I don't see this being the case here.
> >
> > It is also worrying that although you have up to 5 irqchips, they all
> > share a single domain. What does this mean? each irqchip is expected
> > to have its own domain.
>
> Yes, I do like this for backward compatible reason. I'm turning
> a legacy platform device mach(arch/mips/loongson32) in to
> dt based generic mach and I would like to do it step by step rather
> than one time.
>
> So I use legacy domain in order to keep IRQ same with the
> old driver exist on arch/mips/loongson32/common/irq.c
OK, it would have been good to make a note of that in the cover
letter, which is a bit empty at the moment.
Thanks,
M.
--
Jazz is not dead, it just smell funny.
This controller appeared on Loongson-1 family MCUs
including Loongson-1B and Loongson-1C.
Signed-off-by: Jiaxun Yang <[email protected]>
---
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ls1x.c | 196 +++++++++++++++++++++++++++++++++++++
3 files changed, 206 insertions(+)
create mode 100644 drivers/irqchip/irq-ls1x.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..5dcb5456cd14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,15 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
endmenu
config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..7acd0e36d0b4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
+obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
new file mode 100644
index 000000000000..41f856b5d7b3
--- /dev/null
+++ b/drivers/irqchip/irq-ls1x.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Jiaxun Yang <[email protected]>
+ * Loongson-1 platform IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+
+#define LS_REG_INTC_STATUS 0x00
+#define LS_REG_INTC_EN 0x04
+#define LS_REG_INTC_SET 0x08
+#define LS_REG_INTC_CLR 0x0c
+#define LS_REG_INTC_POL 0x10
+#define LS_REG_INTC_EDGE 0x14
+
+/**
+ * struct ls1x_intc_priv - private ls1x-intc data.
+ * @domain: IRQ domain.
+ * @intc_base: IO Base of intc registers.
+ */
+
+struct ls1x_intc_priv {
+ struct irq_domain *domain;
+ void __iomem *intc_base;
+};
+
+
+static void ls1x_chained_handle_irq(struct irq_desc *desc)
+{
+ struct ls1x_intc_priv *priv = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ u32 pending;
+
+ chained_irq_enter(chip, desc);
+ pending = readl(priv->intc_base + LS_REG_INTC_STATUS) &
+ readl(priv->intc_base + LS_REG_INTC_EN);
+
+ if (!pending) {
+ spurious_interrupt();
+ chained_irq_exit(chip, desc);
+ return;
+ }
+
+ while (pending) {
+ int bit = __ffs(pending);
+
+ generic_handle_irq(irq_find_mapping(priv->domain, bit));
+ pending &= ~BIT(bit);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void ls_intc_set_bit(struct irq_chip_generic *gc,
+ unsigned int offset,
+ u32 mask, bool set)
+{
+ if (set)
+ writel(readl(gc->reg_base + offset) | mask,
+ gc->reg_base + offset);
+ else
+ writel(readl(gc->reg_base + offset) & ~mask,
+ gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ u32 mask = data->mask;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irqd_set_trigger_type(data, type);
+ return irq_setup_alt_chip(data, type);
+}
+
+
+static int __init ls1x_intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct ls1x_intc_priv *priv;
+ int parent_irq, err = 0;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->intc_base = of_iomap(node, 0);
+ if (!priv->intc_base) {
+ err = -ENODEV;
+ goto out_free_priv;
+ }
+
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq) {
+ pr_err("ls1x-irq: unable to get parent irq\n");
+ err = -ENODEV;
+ goto out_free_priv;
+ }
+
+ /* Set up an IRQ domain */
+ priv->domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
+ NULL);
+ if (!priv->domain) {
+ pr_err("ls1x-irq: cannot add IRQ domain\n");
+ goto out_free_priv;
+ }
+
+
+ err = irq_alloc_domain_generic_chips(priv->domain, 32, 2,
+ node->full_name, handle_level_irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN, 0,
+ IRQ_GC_INIT_MASK_CACHE);
+ if (err) {
+ pr_err("ls1x-irq: unable to register IRQ domain\n");
+ goto out_free_domain;
+ }
+
+ /* Mask all irqs */
+ writel(0x0, priv->intc_base + LS_REG_INTC_EN);
+
+ /* Ack all irqs */
+ writel(0xffffffff, priv->intc_base + LS_REG_INTC_CLR);
+
+ /* Set all irqs to high level triggered */
+ writel(0xffffffff, priv->intc_base + LS_REG_INTC_POL);
+
+ gc = irq_get_domain_generic_chip(priv->domain, 0);
+
+ gc->reg_base = priv->intc_base;
+
+ ct = gc->chip_types;
+ ct[0].type = IRQ_TYPE_LEVEL_MASK;
+ ct[0].regs.mask = LS_REG_INTC_EN;
+ ct[0].regs.ack = LS_REG_INTC_CLR;
+ ct[0].chip.irq_unmask = irq_gc_mask_set_bit;
+ ct[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ ct[0].chip.irq_ack = irq_gc_ack_set_bit;
+ ct[0].chip.irq_set_type = ls_intc_set_type;
+ ct[0].handler = handle_level_irq;
+
+ ct[1].type = IRQ_TYPE_EDGE_BOTH;
+ ct[1].regs.mask = LS_REG_INTC_EN;
+ ct[1].regs.ack = LS_REG_INTC_CLR;
+ ct[1].chip.irq_unmask = irq_gc_mask_set_bit;
+ ct[1].chip.irq_mask = irq_gc_mask_clr_bit;
+ ct[1].chip.irq_ack = irq_gc_ack_set_bit;
+ ct[1].chip.irq_set_type = ls_intc_set_type;
+ ct[1].handler = handle_edge_irq;
+
+
+ irq_set_chained_handler_and_data(parent_irq,
+ ls1x_chained_handle_irq, priv);
+
+ return 0;
+
+out_free_domain:
+ irq_domain_remove(priv->domain);
+out_free_priv:
+ kfree(priv);
+ return err;
+}
+
+IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls1x_intc_of_init);
--
2.20.1
Dt-bindings doc about Loongson-1 interrupt controller.
Signed-off-by: Jiaxun Yang <[email protected]>
---
.../loongson,ls1x-intc.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..a63ed9fcb535
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,24 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "loongson,ls1x-intc". Valid strings are:
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x18>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+};
--
2.20.1
v1->v2: Fix SPDX-License-Identifier
v2->v3: Rework according suggestions from Marc Zyngier, Thanks.
v3->v4: Rework the driver into a single chip driver.
On 28/01/2019 14:46, Jiaxun Yang wrote:
> This controller appeared on Loongson-1 family MCUs
> including Loongson-1B and Loongson-1C.
>
> Signed-off-by: Jiaxun Yang <[email protected]>
> ---
> drivers/irqchip/Kconfig | 9 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-ls1x.c | 196 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 206 insertions(+)
> create mode 100644 drivers/irqchip/irq-ls1x.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 3d1e60779078..5dcb5456cd14 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -406,6 +406,15 @@ config IMX_IRQSTEER
> help
> Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
>
> +config LS1X_IRQ
> + bool "Loongson-1 Interrupt Controller"
> + depends on MACH_LOONGSON32
> + default y
> + select IRQ_DOMAIN
> + select GENERIC_IRQ_CHIP
> + help
> + Support for the Loongson-1 platform Interrupt Controller.
> +
> endmenu
>
> config SIFIVE_PLIC
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index c93713d24b86..7acd0e36d0b4 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
> +obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
> diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
> new file mode 100644
> index 000000000000..41f856b5d7b3
> --- /dev/null
> +++ b/drivers/irqchip/irq-ls1x.c
> @@ -0,0 +1,196 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019, Jiaxun Yang <[email protected]>
> + * Loongson-1 platform IRQ support
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/ioport.h>
> +#include <linux/irqchip.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/io.h>
> +#include <linux/irqchip/chained_irq.h>
> +
> +#define LS_REG_INTC_STATUS 0x00
> +#define LS_REG_INTC_EN 0x04
> +#define LS_REG_INTC_SET 0x08
> +#define LS_REG_INTC_CLR 0x0c
> +#define LS_REG_INTC_POL 0x10
> +#define LS_REG_INTC_EDGE 0x14
> +
> +/**
> + * struct ls1x_intc_priv - private ls1x-intc data.
> + * @domain: IRQ domain.
> + * @intc_base: IO Base of intc registers.
> + */
> +
> +struct ls1x_intc_priv {
> + struct irq_domain *domain;
> + void __iomem *intc_base;
> +};
> +
> +
> +static void ls1x_chained_handle_irq(struct irq_desc *desc)
> +{
> + struct ls1x_intc_priv *priv = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + u32 pending;
> +
> + chained_irq_enter(chip, desc);
> + pending = readl(priv->intc_base + LS_REG_INTC_STATUS) &
> + readl(priv->intc_base + LS_REG_INTC_EN);
> +
> + if (!pending) {
> + spurious_interrupt();
> + chained_irq_exit(chip, desc);
> + return;
> + }
As I wrote previously, this can be simplified.
> +
> + while (pending) {
> + int bit = __ffs(pending);
> +
> + generic_handle_irq(irq_find_mapping(priv->domain, bit));
> + pending &= ~BIT(bit);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static void ls_intc_set_bit(struct irq_chip_generic *gc,
> + unsigned int offset,
> + u32 mask, bool set)
> +{
> + if (set)
> + writel(readl(gc->reg_base + offset) | mask,
> + gc->reg_base + offset);
> + else
> + writel(readl(gc->reg_base + offset) & ~mask,
> + gc->reg_base + offset);
> +}
> +
> +static int ls_intc_set_type(struct irq_data *data, unsigned int type)
> +{
> + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
> + u32 mask = data->mask;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
> + ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
> + break;
> + case IRQ_TYPE_NONE:
> + break;
What does this mean? I can't see how that can lean to anything valid.
> + default:
> + return -EINVAL;
> + }
> +
> + irqd_set_trigger_type(data, type);
> + return irq_setup_alt_chip(data, type);
> +}
> +
> +
> +static int __init ls1x_intc_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_chip_generic *gc;
> + struct irq_chip_type *ct;
> + struct ls1x_intc_priv *priv;
> + int parent_irq, err = 0;
> +
> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->intc_base = of_iomap(node, 0);
> + if (!priv->intc_base) {
> + err = -ENODEV;
> + goto out_free_priv;
> + }
> +
> + parent_irq = irq_of_parse_and_map(node, 0);
> + if (!parent_irq) {
> + pr_err("ls1x-irq: unable to get parent irq\n");
> + err = -ENODEV;
> + goto out_free_priv;
This is leaking the MMIO mapping.
> + }
> +
> + /* Set up an IRQ domain */
> + priv->domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
> + NULL);
> + if (!priv->domain) {
> + pr_err("ls1x-irq: cannot add IRQ domain\n");
> + goto out_free_priv;
> + }
> +
> +
Spurious empty line.
> + err = irq_alloc_domain_generic_chips(priv->domain, 32, 2,
> + node->full_name, handle_level_irq,
> + IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN, 0,
> + IRQ_GC_INIT_MASK_CACHE);
> + if (err) {
> + pr_err("ls1x-irq: unable to register IRQ domain\n");
> + goto out_free_domain;
> + }
> +
> + /* Mask all irqs */
> + writel(0x0, priv->intc_base + LS_REG_INTC_EN);
> +
> + /* Ack all irqs */
> + writel(0xffffffff, priv->intc_base + LS_REG_INTC_CLR);
> +
> + /* Set all irqs to high level triggered */
> + writel(0xffffffff, priv->intc_base + LS_REG_INTC_POL);
> +
> + gc = irq_get_domain_generic_chip(priv->domain, 0);
> +
> + gc->reg_base = priv->intc_base;
> +
> + ct = gc->chip_types;
> + ct[0].type = IRQ_TYPE_LEVEL_MASK;
> + ct[0].regs.mask = LS_REG_INTC_EN;
> + ct[0].regs.ack = LS_REG_INTC_CLR;
> + ct[0].chip.irq_unmask = irq_gc_mask_set_bit;
> + ct[0].chip.irq_mask = irq_gc_mask_clr_bit;
> + ct[0].chip.irq_ack = irq_gc_ack_set_bit;
> + ct[0].chip.irq_set_type = ls_intc_set_type;
> + ct[0].handler = handle_level_irq;
> +
> + ct[1].type = IRQ_TYPE_EDGE_BOTH;
> + ct[1].regs.mask = LS_REG_INTC_EN;
> + ct[1].regs.ack = LS_REG_INTC_CLR;
> + ct[1].chip.irq_unmask = irq_gc_mask_set_bit;
> + ct[1].chip.irq_mask = irq_gc_mask_clr_bit;
> + ct[1].chip.irq_ack = irq_gc_ack_set_bit;
> + ct[1].chip.irq_set_type = ls_intc_set_type;
> + ct[1].handler = handle_edge_irq;
> +
> +
> + irq_set_chained_handler_and_data(parent_irq,
> + ls1x_chained_handle_irq, priv);
> +
> + return 0;
> +
> +out_free_domain:
> + irq_domain_remove(priv->domain);
> +out_free_priv:
> + kfree(priv);
> + return err;
> +}
> +
> +IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls1x_intc_of_init);
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
v1->v2: Fix SPDX-License-Identifier
v2->v3: Rework according suggestions from Marc Zyngier, Thanks.
v3->v4: Rework the driver into a single chip driver.
v4->v5: Fix minor issues.
This controller appeared on Loongson-1 family MCUs
including Loongson-1B and Loongson-1C.
Signed-off-by: Jiaxun Yang <[email protected]>
---
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ls1x.c | 192 +++++++++++++++++++++++++++++++++++++
3 files changed, 202 insertions(+)
create mode 100644 drivers/irqchip/irq-ls1x.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..5dcb5456cd14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,15 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
endmenu
config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..7acd0e36d0b4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
+obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
new file mode 100644
index 000000000000..79967d8df53e
--- /dev/null
+++ b/drivers/irqchip/irq-ls1x.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Jiaxun Yang <[email protected]>
+ * Loongson-1 platform IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+
+#define LS_REG_INTC_STATUS 0x00
+#define LS_REG_INTC_EN 0x04
+#define LS_REG_INTC_SET 0x08
+#define LS_REG_INTC_CLR 0x0c
+#define LS_REG_INTC_POL 0x10
+#define LS_REG_INTC_EDGE 0x14
+
+/**
+ * struct ls1x_intc_priv - private ls1x-intc data.
+ * @domain: IRQ domain.
+ * @intc_base: IO Base of intc registers.
+ */
+
+struct ls1x_intc_priv {
+ struct irq_domain *domain;
+ void __iomem *intc_base;
+};
+
+
+static void ls1x_chained_handle_irq(struct irq_desc *desc)
+{
+ struct ls1x_intc_priv *priv = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ u32 pending;
+
+ chained_irq_enter(chip, desc);
+ pending = readl(priv->intc_base + LS_REG_INTC_STATUS) &
+ readl(priv->intc_base + LS_REG_INTC_EN);
+
+ if (!pending)
+ spurious_interrupt();
+
+ while (pending) {
+ int bit = __ffs(pending);
+
+ generic_handle_irq(irq_find_mapping(priv->domain, bit));
+ pending &= ~BIT(bit);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void ls_intc_set_bit(struct irq_chip_generic *gc,
+ unsigned int offset,
+ u32 mask, bool set)
+{
+ if (set)
+ writel(readl(gc->reg_base + offset) | mask,
+ gc->reg_base + offset);
+ else
+ writel(readl(gc->reg_base + offset) & ~mask,
+ gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ u32 mask = data->mask;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irqd_set_trigger_type(data, type);
+ return irq_setup_alt_chip(data, type);
+}
+
+
+static int __init ls1x_intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct ls1x_intc_priv *priv;
+ int parent_irq, err = 0;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->intc_base = of_iomap(node, 0);
+ if (!priv->intc_base) {
+ err = -ENODEV;
+ goto out_free_priv;
+ }
+
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq) {
+ pr_err("ls1x-irq: unable to get parent irq\n");
+ err = -ENODEV;
+ goto out_iounmap;
+ }
+
+ /* Set up an IRQ domain */
+ priv->domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
+ NULL);
+ if (!priv->domain) {
+ pr_err("ls1x-irq: cannot add IRQ domain\n");
+ goto out_iounmap;
+ }
+
+ err = irq_alloc_domain_generic_chips(priv->domain, 32, 2,
+ node->full_name, handle_level_irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN, 0,
+ IRQ_GC_INIT_MASK_CACHE);
+ if (err) {
+ pr_err("ls1x-irq: unable to register IRQ domain\n");
+ goto out_free_domain;
+ }
+
+ /* Mask all irqs */
+ writel(0x0, priv->intc_base + LS_REG_INTC_EN);
+
+ /* Ack all irqs */
+ writel(0xffffffff, priv->intc_base + LS_REG_INTC_CLR);
+
+ /* Set all irqs to high level triggered */
+ writel(0xffffffff, priv->intc_base + LS_REG_INTC_POL);
+
+ gc = irq_get_domain_generic_chip(priv->domain, 0);
+
+ gc->reg_base = priv->intc_base;
+
+ ct = gc->chip_types;
+ ct[0].type = IRQ_TYPE_LEVEL_MASK;
+ ct[0].regs.mask = LS_REG_INTC_EN;
+ ct[0].regs.ack = LS_REG_INTC_CLR;
+ ct[0].chip.irq_unmask = irq_gc_mask_set_bit;
+ ct[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ ct[0].chip.irq_ack = irq_gc_ack_set_bit;
+ ct[0].chip.irq_set_type = ls_intc_set_type;
+ ct[0].handler = handle_level_irq;
+
+ ct[1].type = IRQ_TYPE_EDGE_BOTH;
+ ct[1].regs.mask = LS_REG_INTC_EN;
+ ct[1].regs.ack = LS_REG_INTC_CLR;
+ ct[1].chip.irq_unmask = irq_gc_mask_set_bit;
+ ct[1].chip.irq_mask = irq_gc_mask_clr_bit;
+ ct[1].chip.irq_ack = irq_gc_ack_set_bit;
+ ct[1].chip.irq_set_type = ls_intc_set_type;
+ ct[1].handler = handle_edge_irq;
+
+ irq_set_chained_handler_and_data(parent_irq,
+ ls1x_chained_handle_irq, priv);
+
+ return 0;
+
+out_free_domain:
+ irq_domain_remove(priv->domain);
+out_iounmap:
+ iounmap(priv->intc_base);
+out_free_priv:
+ kfree(priv);
+
+ return err;
+}
+
+IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls1x_intc_of_init);
--
2.20.1
Dt-bindings doc about Loongson-1 interrupt controller.
Signed-off-by: Jiaxun Yang <[email protected]>
---
.../loongson,ls1x-intc.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..a63ed9fcb535
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,24 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "loongson,ls1x-intc". Valid strings are:
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x18>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+};
--
2.20.1
On Thu, Jan 24, 2019 at 11:27:30AM +0800, Jiaxun Yang wrote:
> Dt-bindings doc about Loongson-1 interrupt controller
>
> Signed-off-by: Jiaxun Yang <[email protected]>
> ---
> .../loongson,ls1x-intc.txt | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> new file mode 100644
> index 000000000000..a4e17c3f5f93
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> @@ -0,0 +1,24 @@
> +Loongson ls1x Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "loongson,ls1x-intc". Valid strings are:
> +
> +- reg : Specifies base physical address and size of the registers.
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.
> +- interrupts : Specifies the CPU interrupts the controller is connected to.
> +
> +Example:
> +
> +intc: interrupt-controller@1fd01040 {
> + compatible = "loongson,ls1x-intc";
> + reg = <0x1fd01040 0x78>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&cpu_intc>;
> + interrupts = <2>, <3>, <4>, <5>, <6>;
> +};
> \ No newline at end of file
Please fix.
Otherwise,
Reviewed-by: Rob Herring <[email protected]>
This controller appeared on Loongson-1 family MCUs
including Loongson-1B and Loongson-1C.
Signed-off-by: Jiaxun Yang <[email protected]>
---
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ls1x.c | 192 +++++++++++++++++++++++++++++++++++++
3 files changed, 202 insertions(+)
create mode 100644 drivers/irqchip/irq-ls1x.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..5dcb5456cd14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,15 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
endmenu
config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..7acd0e36d0b4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
+obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
diff --git a/drivers/irqchip/irq-ls1x.c b/drivers/irqchip/irq-ls1x.c
new file mode 100644
index 000000000000..79967d8df53e
--- /dev/null
+++ b/drivers/irqchip/irq-ls1x.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019, Jiaxun Yang <[email protected]>
+ * Loongson-1 platform IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+
+#define LS_REG_INTC_STATUS 0x00
+#define LS_REG_INTC_EN 0x04
+#define LS_REG_INTC_SET 0x08
+#define LS_REG_INTC_CLR 0x0c
+#define LS_REG_INTC_POL 0x10
+#define LS_REG_INTC_EDGE 0x14
+
+/**
+ * struct ls1x_intc_priv - private ls1x-intc data.
+ * @domain: IRQ domain.
+ * @intc_base: IO Base of intc registers.
+ */
+
+struct ls1x_intc_priv {
+ struct irq_domain *domain;
+ void __iomem *intc_base;
+};
+
+
+static void ls1x_chained_handle_irq(struct irq_desc *desc)
+{
+ struct ls1x_intc_priv *priv = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ u32 pending;
+
+ chained_irq_enter(chip, desc);
+ pending = readl(priv->intc_base + LS_REG_INTC_STATUS) &
+ readl(priv->intc_base + LS_REG_INTC_EN);
+
+ if (!pending)
+ spurious_interrupt();
+
+ while (pending) {
+ int bit = __ffs(pending);
+
+ generic_handle_irq(irq_find_mapping(priv->domain, bit));
+ pending &= ~BIT(bit);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void ls_intc_set_bit(struct irq_chip_generic *gc,
+ unsigned int offset,
+ u32 mask, bool set)
+{
+ if (set)
+ writel(readl(gc->reg_base + offset) | mask,
+ gc->reg_base + offset);
+ else
+ writel(readl(gc->reg_base + offset) & ~mask,
+ gc->reg_base + offset);
+}
+
+static int ls_intc_set_type(struct irq_data *data, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ u32 mask = data->mask;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, false);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ ls_intc_set_bit(gc, LS_REG_INTC_EDGE, mask, true);
+ ls_intc_set_bit(gc, LS_REG_INTC_POL, mask, false);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irqd_set_trigger_type(data, type);
+ return irq_setup_alt_chip(data, type);
+}
+
+
+static int __init ls1x_intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct ls1x_intc_priv *priv;
+ int parent_irq, err = 0;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->intc_base = of_iomap(node, 0);
+ if (!priv->intc_base) {
+ err = -ENODEV;
+ goto out_free_priv;
+ }
+
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq) {
+ pr_err("ls1x-irq: unable to get parent irq\n");
+ err = -ENODEV;
+ goto out_iounmap;
+ }
+
+ /* Set up an IRQ domain */
+ priv->domain = irq_domain_add_linear(node, 32, &irq_generic_chip_ops,
+ NULL);
+ if (!priv->domain) {
+ pr_err("ls1x-irq: cannot add IRQ domain\n");
+ goto out_iounmap;
+ }
+
+ err = irq_alloc_domain_generic_chips(priv->domain, 32, 2,
+ node->full_name, handle_level_irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN, 0,
+ IRQ_GC_INIT_MASK_CACHE);
+ if (err) {
+ pr_err("ls1x-irq: unable to register IRQ domain\n");
+ goto out_free_domain;
+ }
+
+ /* Mask all irqs */
+ writel(0x0, priv->intc_base + LS_REG_INTC_EN);
+
+ /* Ack all irqs */
+ writel(0xffffffff, priv->intc_base + LS_REG_INTC_CLR);
+
+ /* Set all irqs to high level triggered */
+ writel(0xffffffff, priv->intc_base + LS_REG_INTC_POL);
+
+ gc = irq_get_domain_generic_chip(priv->domain, 0);
+
+ gc->reg_base = priv->intc_base;
+
+ ct = gc->chip_types;
+ ct[0].type = IRQ_TYPE_LEVEL_MASK;
+ ct[0].regs.mask = LS_REG_INTC_EN;
+ ct[0].regs.ack = LS_REG_INTC_CLR;
+ ct[0].chip.irq_unmask = irq_gc_mask_set_bit;
+ ct[0].chip.irq_mask = irq_gc_mask_clr_bit;
+ ct[0].chip.irq_ack = irq_gc_ack_set_bit;
+ ct[0].chip.irq_set_type = ls_intc_set_type;
+ ct[0].handler = handle_level_irq;
+
+ ct[1].type = IRQ_TYPE_EDGE_BOTH;
+ ct[1].regs.mask = LS_REG_INTC_EN;
+ ct[1].regs.ack = LS_REG_INTC_CLR;
+ ct[1].chip.irq_unmask = irq_gc_mask_set_bit;
+ ct[1].chip.irq_mask = irq_gc_mask_clr_bit;
+ ct[1].chip.irq_ack = irq_gc_ack_set_bit;
+ ct[1].chip.irq_set_type = ls_intc_set_type;
+ ct[1].handler = handle_edge_irq;
+
+ irq_set_chained_handler_and_data(parent_irq,
+ ls1x_chained_handle_irq, priv);
+
+ return 0;
+
+out_free_domain:
+ irq_domain_remove(priv->domain);
+out_iounmap:
+ iounmap(priv->intc_base);
+out_free_priv:
+ kfree(priv);
+
+ return err;
+}
+
+IRQCHIP_DECLARE(ls1x_intc, "loongson,ls1x-intc", ls1x_intc_of_init);
--
2.20.1
v1->v2: Fix SPDX-License-Identifier
v2->v3: Rework according suggestions from Marc Zyngier, Thanks.
v3->v4: Rework the driver into a single chip driver.
v4->v5: Fix minor issues.
v5->v6: Fix doc and collect Rob's review tag.
Dt-bindings doc about Loongson-1 interrupt controller.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jiaxun Yang <[email protected]>
---
.../loongson,ls1x-intc.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..9385f8b55109
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,25 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "loongson,ls1x-intc". Valid strings are:
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 2.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x18>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+};
+
--
2.20.1
On Fri, 01 Feb 2019 06:22:34 +0000,
Jiaxun Yang <[email protected]> wrote:
>
> v1->v2: Fix SPDX-License-Identifier
> v2->v3: Rework according suggestions from Marc Zyngier, Thanks.
> v3->v4: Rework the driver into a single chip driver.
> v4->v5: Fix minor issues.
> v5->v6: Fix doc and collect Rob's review tag.
Now applied to irqchip-next
Thanks,
M.
--
Jazz is not dead, it just smell funny.