2019-01-31 18:25:50

by Andreas Kemnade

[permalink] [raw]
Subject: [PATCH v3 0/2] arm: dts: gta04: add gps support

This patch series adds support for gps for gta04. Formerly
it was a single patch, now a non-controllable regulator was
added for completeness sake and to satisty binding
requirements.

Andreas Kemnade (2):
arm: dts: gta04: add ldo 3v3 regulator
arm: dts: gta04: add gps support

arch/arm/boot/dts/omap3-gta04.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

--
2.11.0



2019-01-31 18:25:08

by Andreas Kemnade

[permalink] [raw]
Subject: [PATCH v3 1/2] arm: dts: gta04: add ldo 3v3 regulator

Required for completeness sake to be able to specify
a regulator for devices having a non-optional regulator
property. It corresponds to the "3V3" net in the
schematics.

Signed-off-by: Andreas Kemnade <[email protected]>
---
new in v3

arch/arm/boot/dts/omap3-gta04.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e53d32691308..02d8274a2f47 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -32,6 +32,14 @@
display1 = &tv0;
};

+ ldo_3v3: fixedregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
/* fixed 26MHz oscillator */
hfclk_26m: oscillator {
#clock-cells = <0>;
--
2.11.0


2019-01-31 18:25:47

by Andreas Kemnade

[permalink] [raw]
Subject: [PATCH v3 2/2] arm: dts: gta04: add gps support

The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
which one is mounted so use the compatibility entry for w2sg0004
for all which will work for both.

Signed-off-by: Andreas Kemnade <[email protected]>
---
Changes in v3:
- converted to a patchset
- added vcc-supply

Changes in v2:
- some s/gps/gnss/
- not added vcc-supply because the regulator is not modelled
in dts at all

w2sg0004 bindings are in next-20190129

arch/arm/boot/dts/omap3-gta04.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 02d8274a2f47..4ea0f7dc37c6 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -320,6 +320,12 @@
>;
};

+ gps_pins: pinmux_gps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+ >;
+ };
+
hdq_pins: hdq_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
@@ -652,6 +658,14 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+ gnss: gnss {
+ compatible = "wi2wi,w2sg0004";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gps_pins>;
+ sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ lna-supply = <&vsim>;
+ vcc-supply = <&ldo_3v3>;
+ };
};

&uart3 {
--
2.11.0


2019-02-01 10:14:56

by Johan Hovold

[permalink] [raw]
Subject: Re: [PATCH v3 1/2] arm: dts: gta04: add ldo 3v3 regulator

On Thu, Jan 31, 2019 at 07:06:39PM +0100, Andreas Kemnade wrote:
> Required for completeness sake to be able to specify
> a regulator for devices having a non-optional regulator
> property. It corresponds to the "3V3" net in the
> schematics.
>
> Signed-off-by: Andreas Kemnade <[email protected]>
> ---
> new in v3
>
> arch/arm/boot/dts/omap3-gta04.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> index e53d32691308..02d8274a2f47 100644
> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> @@ -32,6 +32,14 @@
> display1 = &tv0;
> };
>
> + ldo_3v3: fixedregulator {

A suffix, even if its just to rename as "fixedregulator0", would allow
further fixed regulators to be added later, but I guess that can be
handled then.

> + compatible = "regulator-fixed";
> + regulator-name = "ldo_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> /* fixed 26MHz oscillator */
> hfclk_26m: oscillator {
> #clock-cells = <0>;

Reviewed-by: Johan Hovold <[email protected]>

Johan

2019-02-01 10:15:38

by Johan Hovold

[permalink] [raw]
Subject: Re: [PATCH v3 2/2] arm: dts: gta04: add gps support

On Thu, Jan 31, 2019 at 07:06:40PM +0100, Andreas Kemnade wrote:
> The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
> which one is mounted so use the compatibility entry for w2sg0004
> for all which will work for both.
>
> Signed-off-by: Andreas Kemnade <[email protected]>
> ---
> Changes in v3:
> - converted to a patchset
> - added vcc-supply
>
> Changes in v2:
> - some s/gps/gnss/
> - not added vcc-supply because the regulator is not modelled
> in dts at all
>
> w2sg0004 bindings are in next-20190129
>
> arch/arm/boot/dts/omap3-gta04.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> index 02d8274a2f47..4ea0f7dc37c6 100644
> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> @@ -320,6 +320,12 @@
> >;
> };
>
> + gps_pins: pinmux_gps_pins {

s/gps/gnss/ would be more consistent, but whatever.

> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
> + >;
> + };
> +
> hdq_pins: hdq_pins {
> pinctrl-single,pins = <
> OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
> @@ -652,6 +658,14 @@
> &uart2 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart2_pins>;
> + gnss: gnss {
> + compatible = "wi2wi,w2sg0004";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gps_pins>;
> + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
> + lna-supply = <&vsim>;
> + vcc-supply = <&ldo_3v3>;
> + };

Reviewed-by: Johan Hovold <[email protected]>

Johan

2019-02-04 08:46:47

by Johan Hovold

[permalink] [raw]
Subject: Re: [PATCH v3 2/2] arm: dts: gta04: add gps support

On Fri, Feb 01, 2019 at 08:06:30PM +0100, Andreas Kemnade wrote:
> On Fri, 1 Feb 2019 11:04:16 +0100
> Johan Hovold <[email protected]> wrote:
>
> > On Thu, Jan 31, 2019 at 07:06:40PM +0100, Andreas Kemnade wrote:
> > > The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
> > > which one is mounted so use the compatibility entry for w2sg0004
> > > for all which will work for both.
> > >
> > > Signed-off-by: Andreas Kemnade <[email protected]>
> > > ---
> > > Changes in v3:
> > > - converted to a patchset
> > > - added vcc-supply
> > >
> > > Changes in v2:
> > > - some s/gps/gnss/
> > > - not added vcc-supply because the regulator is not modelled
> > > in dts at all
> > >
> > > w2sg0004 bindings are in next-20190129
> > >
> > > arch/arm/boot/dts/omap3-gta04.dtsi | 14 ++++++++++++++
> > > 1 file changed, 14 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> > > index 02d8274a2f47..4ea0f7dc37c6 100644
> > > --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> > > +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> > > @@ -320,6 +320,12 @@
> > > >;
> > > };
> > >
> > > + gps_pins: pinmux_gps_pins {
> >
> > s/gps/gnss/ would be more consistent, but whatever.
> >
> well, gps is already in the file at another place. So it is a bit
> inconsistent in any case, without further cleanup. If someone comes
> up with a strong opinion here I would of course change it.

Up to you. As long as the gnss node is named "gnss" I don't have a
strong opinion on the other names (as long as they follow the spec of
course).

Johan

2019-02-07 17:32:20

by Tony Lindgren

[permalink] [raw]
Subject: Re: [PATCH v3 2/2] arm: dts: gta04: add gps support

* Johan Hovold <[email protected]> [190204 08:30]:
> On Fri, Feb 01, 2019 at 08:06:30PM +0100, Andreas Kemnade wrote:
> > On Fri, 1 Feb 2019 11:04:16 +0100
> > Johan Hovold <[email protected]> wrote:
> >
> > > On Thu, Jan 31, 2019 at 07:06:40PM +0100, Andreas Kemnade wrote:
> > > > The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
> > > > which one is mounted so use the compatibility entry for w2sg0004
> > > > for all which will work for both.
> > > >
> > > > Signed-off-by: Andreas Kemnade <[email protected]>
> > > > ---
> > > > Changes in v3:
> > > > - converted to a patchset
> > > > - added vcc-supply
> > > >
> > > > Changes in v2:
> > > > - some s/gps/gnss/
> > > > - not added vcc-supply because the regulator is not modelled
> > > > in dts at all
> > > >
> > > > w2sg0004 bindings are in next-20190129
> > > >
> > > > arch/arm/boot/dts/omap3-gta04.dtsi | 14 ++++++++++++++
> > > > 1 file changed, 14 insertions(+)
> > > >
> > > > diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> > > > index 02d8274a2f47..4ea0f7dc37c6 100644
> > > > --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> > > > +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> > > > @@ -320,6 +320,12 @@
> > > > >;
> > > > };
> > > >
> > > > + gps_pins: pinmux_gps_pins {
> > >
> > > s/gps/gnss/ would be more consistent, but whatever.
> > >
> > well, gps is already in the file at another place. So it is a bit
> > inconsistent in any case, without further cleanup. If someone comes
> > up with a strong opinion here I would of course change it.
>
> Up to you. As long as the gnss node is named "gnss" I don't have a
> strong opinion on the other names (as long as they follow the spec of
> course).

OK so I'm applying these two patches into omap-for-v5.1/dt.

Thanks,

Tony