This is the start of the stable review cycle for the 4.20.15 release.
There are 76 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Mar 10 12:48:49 UTC 2019.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.15-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.20.15-rc1
Daniel Borkmann <[email protected]>
bpf: fix sanitation rewrite in case of non-pointers
Martin Wilck <[email protected]>
scsi: core: reset host byte in DID_NEXUS_FAILURE case
YueHaibing <[email protected]>
exec: Fix mem leak in kernel_read_file
Matthias Kaehlcke <[email protected]>
Bluetooth: Fix locking in bt_accept_enqueue() for BH context
Kai-Heng Feng <[email protected]>
Bluetooth: btrtl: Restore old logic to assume firmware is already loaded
Luis Chamberlain <[email protected]>
selftests: firmware: fix verify_reqs() return value
Karoly Pados <[email protected]>
USB: serial: cp210x: fix GPIO in autosuspend
Johan Hovold <[email protected]>
gnss: sirf: fix premature wakeup interrupt enable
Max Filippov <[email protected]>
xtensa: fix get_wchan
Bart Van Assche <[email protected]>
aio: Fix locking in aio_poll()
Liu Xiang <[email protected]>
MIPS: irq: Allocate accurate order pages for irq stack
Gustavo A. R. Silva <[email protected]>
applicom: Fix potential Spectre v1 vulnerabilities
Balaji Manoharan <[email protected]>
usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
Thierry Reding <[email protected]>
xhci: tegra: Prevent error pointer dereference
Pavel Tikhomirov <[email protected]>
tracing: Fix event filters and triggers to handle negative numbers
Kirill A. Shutemov <[email protected]>
x86/boot/compressed/64: Do not read legacy ROM on EFI system
Jiaxun Yang <[email protected]>
x86/CPU/AMD: Set the CPB bit unconditionally on F17h
Vlad Buslov <[email protected]>
net: sched: act_tunnel_key: fix NULL pointer dereference during init
Davide Caratti <[email protected]>
net/sched: act_skbedit: fix refcount leak when replace fails
Davide Caratti <[email protected]>
net/sched: act_ipt: fix refcount leak when replace fails
Heiner Kallweit <[email protected]>
net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode
Maxime Chevallier <[email protected]>
net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X
David Ahern <[email protected]>
ipv4: Pass original device to ip_rcv_finish_core
David Ahern <[email protected]>
mpls: Return error for RTA_GATEWAY attribute
David Ahern <[email protected]>
ipv6: Return error for RTA_VIA attribute
David Ahern <[email protected]>
ipv4: Return error for RTA_VIA attribute
Nazarov Sergey <[email protected]>
net: avoid use IPCB in cipso_v4_error
Nazarov Sergey <[email protected]>
net: Add __icmp_send helper.
Timur Celik <[email protected]>
tun: remove unnecessary memory barrier
Igor Druzhinin <[email protected]>
xen-netback: fix occasional leak of grant ref mappings under memory pressure
Igor Druzhinin <[email protected]>
xen-netback: don't populate the hash cache on XenBus disconnect
Timur Celik <[email protected]>
tun: fix blocking read
Tung Nguyen <[email protected]>
tipc: fix race condition causing hung sendto
Eric Biggers <[email protected]>
net: socket: set sock->sk to NULL after calling proto_ops::release()
Mao Wenan <[email protected]>
net: sit: fix memory leak in sit_init_net()
Heiner Kallweit <[email protected]>
net: phy: phylink: fix uninitialized variable in phylink_get_mac_state
Rajasingh Thavamani <[email protected]>
net: phy: Micrel KSZ8061: link failure after cable connect
YueHaibing <[email protected]>
net: nfc: Fix NULL dereference on nfc_llcp_build_tlv fails
Sheng Lan <[email protected]>
net: netem: fix skb length BUG_ON in __skb_to_sgvec
Paul Moore <[email protected]>
netlabel: fix out-of-bounds memory accesses
Andrew Lunn <[email protected]>
net: dsa: mv88e6xxx: Fix u64 statistics
Andrew Lunn <[email protected]>
net: dsa: mv88e6xxx: Fix statistics on mv88e6161
Bryan Whitehead <[email protected]>
lan743x: Fix TX Stall Issue
Hangbin Liu <[email protected]>
ipv4: Add ICMPv6 support when parse route ipproto
Haiyang Zhang <[email protected]>
hv_netvsc: Fix IP header checksum for coalesced packets
Jiri Benc <[email protected]>
geneve: correctly handle ipv6.disable module parameter
Michael Chan <[email protected]>
bnxt_en: Drop oversize TX packets to prevent errors.
Erik Hugne <[email protected]>
tipc: fix RDM/DGRAM connect() regression
Ido Schimmel <[email protected]>
team: Free BPF filter when unregistering netdev
Kai-Heng Feng <[email protected]>
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
Xin Long <[email protected]>
sctp: call iov_iter_revert() after sending ABORT
Kristian Evensen <[email protected]>
qmi_wwan: Add support for Quectel EG12/EM12
YueHaibing <[email protected]>
net-sysfs: Fix mem leak in netdev_register_kobject
Eric Dumazet <[email protected]>
net: sched: put back q.qlen into a single location
Kavya Sree Kotagiri <[email protected]>
net: mscc: Enable all ports in QSGMII
Heiner Kallweit <[email protected]>
net: dsa: mv8e6xxx: fix number of internal PHYs for 88E6x90 family
Heiner Kallweit <[email protected]>
net: dsa: mv88e6xxx: handle unknown duplex modes gracefully in mv88e6xxx_port_set_duplex
Heiner Kallweit <[email protected]>
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
Ido Schimmel <[email protected]>
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
Tetsuo Handa <[email protected]>
staging: android: ashmem: Avoid range_alloc() allocation with ashmem_mutex held.
Tetsuo Handa <[email protected]>
staging: android: ashmem: Don't call fallocate() with ashmem_mutex held.
Qing Xia <[email protected]>
staging: android: ion: fix sys heap pool's gfp_flags
Ajay Singh <[email protected]>
staging: wilc1000: fix to set correct value for 'vif_num'
Gustavo A. R. Silva <[email protected]>
staging: comedi: ni_660x: fix missing break in switch statement
Gao Xiang <[email protected]>
staging: erofs: compressed_pages should not be accessed again after freed
Gao Xiang <[email protected]>
staging: erofs: fix illegal address access under memory pressure
Gao Xiang <[email protected]>
staging: erofs: fix race of initializing xattrs of a inode at the same time
Sheng Yong <[email protected]>
staging: erofs: fix memleak of inode's shared xattr array
Gao Xiang <[email protected]>
staging: erofs: fix fast symlink w/o xattr when fs xattr is on
Geert Uytterhoeven <[email protected]>
driver core: Postpone DMA tear-down until after devres release
Mans Rullgard <[email protected]>
USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485
Ivan Mironov <[email protected]>
USB: serial: cp210x: add ID for Ingenico 3070
Daniele Palmas <[email protected]>
USB: serial: option: add Telit ME910 ECM composition
Todd Kjos <[email protected]>
binder: create node flag to request sender's security context
Gao Xiang <[email protected]>
staging: erofs: fix mis-acted TAIL merging behavior
Viresh Kumar <[email protected]>
cpufreq: Use struct kobj_attribute instead of struct global_attr
-------------
Diffstat:
Makefile | 4 +-
arch/mips/kernel/irq.c | 4 +-
arch/x86/boot/compressed/pgtable_64.c | 19 ++++-
arch/x86/kernel/cpu/amd.c | 8 +-
arch/xtensa/kernel/process.c | 4 +-
drivers/android/binder.c | 106 ++++++++++++++++++------
drivers/base/dd.c | 2 +-
drivers/bluetooth/btrtl.c | 10 ++-
drivers/char/applicom.c | 35 +++++---
drivers/cpufreq/cpufreq.c | 6 +-
drivers/cpufreq/intel_pstate.c | 23 +++---
drivers/gnss/sirf.c | 32 +++----
drivers/net/dsa/mv88e6xxx/chip.c | 27 ++++--
drivers/net/dsa/mv88e6xxx/port.c | 10 ++-
drivers/net/dsa/mv88e6xxx/port.h | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++
drivers/net/ethernet/marvell/sky2.c | 24 +++++-
drivers/net/ethernet/microchip/lan743x_main.c | 16 +++-
drivers/net/ethernet/mscc/ocelot_board.c | 14 +++-
drivers/net/geneve.c | 11 ++-
drivers/net/hyperv/netvsc_drv.c | 22 ++++-
drivers/net/phy/micrel.c | 13 ++-
drivers/net/phy/phylink.c | 4 +
drivers/net/team/team_mode_loadbalance.c | 15 ++++
drivers/net/tun.c | 4 +-
drivers/net/usb/qmi_wwan.c | 26 ++++--
drivers/net/xen-netback/hash.c | 2 +
drivers/net/xen-netback/interface.c | 7 ++
drivers/net/xen-netback/netback.c | 10 +--
drivers/scsi/scsi_lib.c | 1 +
drivers/staging/android/ashmem.c | 67 +++++++++------
drivers/staging/android/ion/ion_system_heap.c | 2 +-
drivers/staging/comedi/drivers/ni_660x.c | 1 +
drivers/staging/erofs/inode.c | 8 +-
drivers/staging/erofs/internal.h | 11 ++-
drivers/staging/erofs/unzip_vle.c | 115 ++++++++++++++++----------
drivers/staging/erofs/unzip_vle.h | 3 +-
drivers/staging/erofs/unzip_vle_lz4.c | 19 ++---
drivers/staging/erofs/xattr.c | 65 +++++++++++----
drivers/staging/wilc1000/linux_wlan.c | 4 +-
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci-tegra.c | 4 +-
drivers/usb/serial/cp210x.c | 12 +++
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 6 ++
drivers/usb/serial/option.c | 2 +
fs/aio.c | 12 ++-
fs/exec.c | 2 +-
include/linux/cpufreq.h | 12 +--
include/net/bluetooth/bluetooth.h | 2 +-
include/net/icmp.h | 9 +-
include/net/ip.h | 4 +-
include/net/sch_generic.h | 31 +++----
include/uapi/linux/android/binder.h | 19 +++++
kernel/bpf/verifier.c | 3 +-
kernel/trace/trace_events_filter.c | 5 +-
net/bluetooth/af_bluetooth.c | 16 +++-
net/bluetooth/l2cap_sock.c | 2 +-
net/bluetooth/rfcomm/sock.c | 2 +-
net/bluetooth/sco.c | 2 +-
net/core/gen_stats.c | 2 -
net/core/net-sysfs.c | 3 +
net/ipv4/cipso_ipv4.c | 20 ++++-
net/ipv4/fib_frontend.c | 4 +
net/ipv4/icmp.c | 7 +-
net/ipv4/ip_input.c | 9 +-
net/ipv4/ip_options.c | 22 +++--
net/ipv4/netlink.c | 17 +++-
net/ipv4/route.c | 2 +-
net/ipv6/ip6mr.c | 8 +-
net/ipv6/route.c | 7 +-
net/ipv6/sit.c | 1 +
net/mpls/af_mpls.c | 3 +
net/netlabel/netlabel_kapi.c | 3 +-
net/nfc/llcp_commands.c | 20 +++++
net/nfc/llcp_core.c | 24 +++++-
net/sched/act_ipt.c | 3 +-
net/sched/act_skbedit.c | 3 +-
net/sched/act_tunnel_key.c | 3 +-
net/sched/sch_generic.c | 13 ++-
net/sched/sch_netem.c | 10 ++-
net/sctp/socket.c | 1 +
net/socket.c | 1 +
net/tipc/socket.c | 8 +-
tools/testing/selftests/firmware/fw_lib.sh | 2 +-
85 files changed, 783 insertions(+), 322 deletions(-)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
commit af692e117cb8cd9d3d844d413095775abc1217f9 upstream.
This patch resolves the following page use-after-free issue,
z_erofs_vle_unzip:
...
for (i = 0; i < nr_pages; ++i) {
...
z_erofs_onlinepage_endio(page); (1)
}
for (i = 0; i < clusterpages; ++i) {
page = compressed_pages[i];
if (page->mapping == mngda) (2)
continue;
/* recycle all individual staging pages */
(void)z_erofs_gather_if_stagingpage(page_pool, page); (3)
WRITE_ONCE(compressed_pages[i], NULL);
}
...
After (1) is executed, page is freed and could be then reused, if
compressed_pages is scanned after that, it could fall info (2) or
(3) by mistake and that could finally be in a mess.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <[email protected]> # 4.19+
Signed-off-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/unzip_vle.c | 38 +++++++++++++++++-----------------
drivers/staging/erofs/unzip_vle.h | 3 --
drivers/staging/erofs/unzip_vle_lz4.c | 19 +++++++----------
3 files changed, 29 insertions(+), 31 deletions(-)
--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -929,11 +929,10 @@ repeat:
if (llen > grp->llen)
llen = grp->llen;
- err = z_erofs_vle_unzip_fast_percpu(compressed_pages,
- clusterpages, pages, llen, work->pageofs,
- z_erofs_onlinepage_endio);
+ err = z_erofs_vle_unzip_fast_percpu(compressed_pages, clusterpages,
+ pages, llen, work->pageofs);
if (err != -ENOTSUPP)
- goto out_percpu;
+ goto out;
if (sparsemem_pages >= nr_pages)
goto skip_allocpage;
@@ -954,8 +953,25 @@ skip_allocpage:
erofs_vunmap(vout, nr_pages);
out:
+ /* must handle all compressed pages before endding pages */
+ for (i = 0; i < clusterpages; ++i) {
+ page = compressed_pages[i];
+
+#ifdef EROFS_FS_HAS_MANAGED_CACHE
+ if (page->mapping == mngda)
+ continue;
+#endif
+ /* recycle all individual staging pages */
+ (void)z_erofs_gather_if_stagingpage(page_pool, page);
+
+ WRITE_ONCE(compressed_pages[i], NULL);
+ }
+
for (i = 0; i < nr_pages; ++i) {
page = pages[i];
+ if (!page)
+ continue;
+
DBG_BUGON(page->mapping == NULL);
/* recycle all individual staging pages */
@@ -968,20 +984,6 @@ out:
z_erofs_onlinepage_endio(page);
}
-out_percpu:
- for (i = 0; i < clusterpages; ++i) {
- page = compressed_pages[i];
-
-#ifdef EROFS_FS_HAS_MANAGED_CACHE
- if (page->mapping == mngda)
- continue;
-#endif
- /* recycle all individual staging pages */
- (void)z_erofs_gather_if_stagingpage(page_pool, page);
-
- WRITE_ONCE(compressed_pages[i], NULL);
- }
-
if (pages == z_pagemap_global)
mutex_unlock(&z_pagemap_global_lock);
else if (unlikely(pages != pages_onstack))
--- a/drivers/staging/erofs/unzip_vle.h
+++ b/drivers/staging/erofs/unzip_vle.h
@@ -218,8 +218,7 @@ extern int z_erofs_vle_plain_copy(struct
extern int z_erofs_vle_unzip_fast_percpu(struct page **compressed_pages,
unsigned clusterpages, struct page **pages,
- unsigned outlen, unsigned short pageofs,
- void (*endio)(struct page *));
+ unsigned int outlen, unsigned short pageofs);
extern int z_erofs_vle_unzip_vmap(struct page **compressed_pages,
unsigned clusterpages, void *vaddr, unsigned llen,
--- a/drivers/staging/erofs/unzip_vle_lz4.c
+++ b/drivers/staging/erofs/unzip_vle_lz4.c
@@ -105,8 +105,7 @@ int z_erofs_vle_unzip_fast_percpu(struct
unsigned int clusterpages,
struct page **pages,
unsigned int outlen,
- unsigned short pageofs,
- void (*endio)(struct page *))
+ unsigned short pageofs)
{
void *vin, *vout;
unsigned int nr_pages, i, j;
@@ -128,19 +127,16 @@ int z_erofs_vle_unzip_fast_percpu(struct
ret = z_erofs_unzip_lz4(vin, vout + pageofs,
clusterpages * PAGE_SIZE, outlen);
- if (ret >= 0) {
- outlen = ret;
- ret = 0;
- }
+ if (ret < 0)
+ goto out;
+ ret = 0;
for (i = 0; i < nr_pages; ++i) {
j = min((unsigned int)PAGE_SIZE - pageofs, outlen);
if (pages[i]) {
- if (ret < 0) {
- SetPageError(pages[i]);
- } else if (clusterpages == 1 &&
- pages[i] == compressed_pages[0]) {
+ if (clusterpages == 1 &&
+ pages[i] == compressed_pages[0]) {
memcpy(vin + pageofs, vout + pageofs, j);
} else {
void *dst = kmap_atomic(pages[i]);
@@ -148,12 +144,13 @@ int z_erofs_vle_unzip_fast_percpu(struct
memcpy(dst + pageofs, vout + pageofs, j);
kunmap_atomic(dst);
}
- endio(pages[i]);
}
vout += PAGE_SIZE;
outlen -= j;
pageofs = 0;
}
+
+out:
preempt_enable();
if (clusterpages == 1)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ajay Singh <[email protected]>
commit dda037057a572f5c82ac2499eb4e6fb17600ba3e upstream.
Set correct value in '->vif_num' for the total number of interfaces and
set '->idx' value using 'i'.
Fixes: 735bb39ca3be ("staging: wilc1000: simplify vif[i]->ndev accesses")
Fixes: 0e490657c721 ("staging: wilc1000: Fix problem with wrong vif index")
Cc: <[email protected]>
Suggested-by: Dan Carpenter <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/wilc1000/linux_wlan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -1104,8 +1104,8 @@ int wilc_netdev_init(struct wilc **wilc,
vif->wilc = *wilc;
vif->ndev = ndev;
wl->vif[i] = vif;
- wl->vif_num = i;
- vif->idx = wl->vif_num;
+ wl->vif_num = i + 1;
+ vif->idx = i;
ndev->netdev_ops = &wilc_netdev_ops;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tetsuo Handa <[email protected]>
commit fb4415a12632f0b9078a0aa80c16745d48fcfc74 upstream.
syzbot is hitting lockdep warnings [1][2][3]. This patch tries to fix
the warning by eliminating ashmem_shrink_scan() => {shmem|vfs}_fallocate()
sequence.
[1] https://syzkaller.appspot.com/bug?id=87c399f6fa6955006080b24142e2ce7680295ad4
[2] https://syzkaller.appspot.com/bug?id=7ebea492de7521048355fc84210220e1038a7908
[3] https://syzkaller.appspot.com/bug?id=e02419c12131c24e2a957ea050c2ab6dcbbc3270
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Cc: [email protected]
Acked-by: Joel Fernandes (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/android/ashmem.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -75,6 +75,9 @@ struct ashmem_range {
/* LRU list of unpinned pages, protected by ashmem_mutex */
static LIST_HEAD(ashmem_lru_list);
+static atomic_t ashmem_shrink_inflight = ATOMIC_INIT(0);
+static DECLARE_WAIT_QUEUE_HEAD(ashmem_shrink_wait);
+
/*
* long lru_count - The count of pages on our LRU list.
*
@@ -438,7 +441,6 @@ out:
static unsigned long
ashmem_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
{
- struct ashmem_range *range, *next;
unsigned long freed = 0;
/* We might recurse into filesystem code, so bail out if necessary */
@@ -448,21 +450,33 @@ ashmem_shrink_scan(struct shrinker *shri
if (!mutex_trylock(&ashmem_mutex))
return -1;
- list_for_each_entry_safe(range, next, &ashmem_lru_list, lru) {
+ while (!list_empty(&ashmem_lru_list)) {
+ struct ashmem_range *range =
+ list_first_entry(&ashmem_lru_list, typeof(*range), lru);
loff_t start = range->pgstart * PAGE_SIZE;
loff_t end = (range->pgend + 1) * PAGE_SIZE;
+ struct file *f = range->asma->file;
- range->asma->file->f_op->fallocate(range->asma->file,
- FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
- start, end - start);
+ get_file(f);
+ atomic_inc(&ashmem_shrink_inflight);
range->purged = ASHMEM_WAS_PURGED;
lru_del(range);
freed += range_size(range);
+ mutex_unlock(&ashmem_mutex);
+ f->f_op->fallocate(f,
+ FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+ start, end - start);
+ fput(f);
+ if (atomic_dec_and_test(&ashmem_shrink_inflight))
+ wake_up_all(&ashmem_shrink_wait);
+ if (!mutex_trylock(&ashmem_mutex))
+ goto out;
if (--sc->nr_to_scan <= 0)
break;
}
mutex_unlock(&ashmem_mutex);
+out:
return freed;
}
@@ -713,6 +727,7 @@ static int ashmem_pin_unpin(struct ashme
return -EFAULT;
mutex_lock(&ashmem_mutex);
+ wait_event(ashmem_shrink_wait, !atomic_read(&ashmem_shrink_inflight));
if (!asma->file)
goto out_unlock;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kristian Evensen <[email protected]>
[ Upstream commit 822e44b45eb991c63487c5e2ce7d636411870a8d ]
Quectel EG12 (module)/EM12 (M.2 card) is a Cat. 12 LTE modem. The modem
behaves in the same way as the EP06, so the "set DTR"-quirk must be
applied and the diagnostic-interface check performed. Since the
diagnostic-check now applies to more modems, I have renamed the function
from quectel_ep06_diag_detected() to quectel_diag_detected().
Signed-off-by: Kristian Evensen <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -976,6 +976,13 @@ static const struct usb_device_id produc
0xff),
.driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr,
},
+ { /* Quectel EG12/EM12 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x0512,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC,
+ 0xff),
+ .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr,
+ },
/* 3. Combined interface devices matching on interface number */
{QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */
@@ -1343,17 +1350,20 @@ static bool quectel_ec20_detected(struct
return false;
}
-static bool quectel_ep06_diag_detected(struct usb_interface *intf)
+static bool quectel_diag_detected(struct usb_interface *intf)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_interface_descriptor intf_desc = intf->cur_altsetting->desc;
+ u16 id_vendor = le16_to_cpu(dev->descriptor.idVendor);
+ u16 id_product = le16_to_cpu(dev->descriptor.idProduct);
- if (le16_to_cpu(dev->descriptor.idVendor) == 0x2c7c &&
- le16_to_cpu(dev->descriptor.idProduct) == 0x0306 &&
- intf_desc.bNumEndpoints == 2)
- return true;
+ if (id_vendor != 0x2c7c || intf_desc.bNumEndpoints != 2)
+ return false;
- return false;
+ if (id_product == 0x0306 || id_product == 0x0512)
+ return true;
+ else
+ return false;
}
static int qmi_wwan_probe(struct usb_interface *intf,
@@ -1390,13 +1400,13 @@ static int qmi_wwan_probe(struct usb_int
return -ENODEV;
}
- /* Quectel EP06/EM06/EG06 supports dynamic interface configuration, so
+ /* Several Quectel modems supports dynamic interface configuration, so
* we need to match on class/subclass/protocol. These values are
* identical for the diagnostic- and QMI-interface, but bNumEndpoints is
* different. Ignore the current interface if the number of endpoints
* the number for the diag interface (two).
*/
- if (quectel_ep06_diag_detected(intf))
+ if (quectel_diag_detected(intf))
return -ENODEV;
return usbnet_probe(intf, id);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
commit 1e5ceeab6929585512c63d05911d6657064abf7b upstream.
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <[email protected]> # 4.19+
Signed-off-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/unzip_vle.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -626,8 +626,12 @@ repeat:
/* lucky, within the range of the current map_blocks */
if (offset + cur >= map->m_la &&
- offset + cur < map->m_la + map->m_llen)
+ offset + cur < map->m_la + map->m_llen) {
+ /* didn't get a valid unzip work previously (very rare) */
+ if (!builder->work)
+ goto restart_now;
goto hitted;
+ }
/* go ahead the next map_blocks */
debugln("%s: [out-of-range] pos %llu", __func__, offset + cur);
@@ -641,6 +645,7 @@ repeat:
if (unlikely(err))
goto err_out;
+restart_now:
if (unlikely(!(map->m_flags & EROFS_MAP_MAPPED)))
goto hitted;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Todd Kjos <[email protected]>
commit ec74136ded792deed80780a2f8baf3521eeb72f9 upstream.
To allow servers to verify client identity, allow a node
flag to be set that causes the sender's security context
to be delivered with the transaction. The BR_TRANSACTION
command is extended in BR_TRANSACTION_SEC_CTX to
contain a pointer to the security context string.
Signed-off-by: Todd Kjos <[email protected]>
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder.c | 106 ++++++++++++++++++++++++++++--------
include/uapi/linux/android/binder.h | 19 ++++++
2 files changed, 102 insertions(+), 23 deletions(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -356,6 +356,8 @@ struct binder_error {
* (invariant after initialized)
* @min_priority: minimum scheduling priority
* (invariant after initialized)
+ * @txn_security_ctx: require sender's security context
+ * (invariant after initialized)
* @async_todo: list of async work items
* (protected by @proc->inner_lock)
*
@@ -392,6 +394,7 @@ struct binder_node {
* invariant after initialization
*/
u8 accept_fds:1;
+ u8 txn_security_ctx:1;
u8 min_priority;
};
bool has_async_transaction;
@@ -642,6 +645,7 @@ struct binder_transaction {
long saved_priority;
kuid_t sender_euid;
struct list_head fd_fixups;
+ binder_uintptr_t security_ctx;
/**
* @lock: protects @from, @to_proc, and @to_thread
*
@@ -1165,6 +1169,7 @@ static struct binder_node *binder_init_n
node->work.type = BINDER_WORK_NODE;
node->min_priority = flags & FLAT_BINDER_FLAG_PRIORITY_MASK;
node->accept_fds = !!(flags & FLAT_BINDER_FLAG_ACCEPTS_FDS);
+ node->txn_security_ctx = !!(flags & FLAT_BINDER_FLAG_TXN_SECURITY_CTX);
spin_lock_init(&node->lock);
INIT_LIST_HEAD(&node->work.entry);
INIT_LIST_HEAD(&node->async_todo);
@@ -2777,6 +2782,8 @@ static void binder_transaction(struct bi
binder_size_t last_fixup_min_off = 0;
struct binder_context *context = proc->context;
int t_debug_id = atomic_inc_return(&binder_last_id);
+ char *secctx = NULL;
+ u32 secctx_sz = 0;
e = binder_transaction_log_add(&binder_transaction_log);
e->debug_id = t_debug_id;
@@ -3017,6 +3024,20 @@ static void binder_transaction(struct bi
t->flags = tr->flags;
t->priority = task_nice(current);
+ if (target_node && target_node->txn_security_ctx) {
+ u32 secid;
+
+ security_task_getsecid(proc->tsk, &secid);
+ ret = security_secid_to_secctx(secid, &secctx, &secctx_sz);
+ if (ret) {
+ return_error = BR_FAILED_REPLY;
+ return_error_param = ret;
+ return_error_line = __LINE__;
+ goto err_get_secctx_failed;
+ }
+ extra_buffers_size += ALIGN(secctx_sz, sizeof(u64));
+ }
+
trace_binder_transaction(reply, t, target_node);
t->buffer = binder_alloc_new_buf(&target_proc->alloc, tr->data_size,
@@ -3033,6 +3054,19 @@ static void binder_transaction(struct bi
t->buffer = NULL;
goto err_binder_alloc_buf_failed;
}
+ if (secctx) {
+ size_t buf_offset = ALIGN(tr->data_size, sizeof(void *)) +
+ ALIGN(tr->offsets_size, sizeof(void *)) +
+ ALIGN(extra_buffers_size, sizeof(void *)) -
+ ALIGN(secctx_sz, sizeof(u64));
+ char *kptr = t->buffer->data + buf_offset;
+
+ t->security_ctx = (uintptr_t)kptr +
+ binder_alloc_get_user_buffer_offset(&target_proc->alloc);
+ memcpy(kptr, secctx, secctx_sz);
+ security_release_secctx(secctx, secctx_sz);
+ secctx = NULL;
+ }
t->buffer->debug_id = t->debug_id;
t->buffer->transaction = t;
t->buffer->target_node = target_node;
@@ -3302,6 +3336,9 @@ err_copy_data_failed:
t->buffer->transaction = NULL;
binder_alloc_free_buf(&target_proc->alloc, t->buffer);
err_binder_alloc_buf_failed:
+ if (secctx)
+ security_release_secctx(secctx, secctx_sz);
+err_get_secctx_failed:
kfree(tcomplete);
binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
err_alloc_tcomplete_failed:
@@ -4033,11 +4070,13 @@ retry:
while (1) {
uint32_t cmd;
- struct binder_transaction_data tr;
+ struct binder_transaction_data_secctx tr;
+ struct binder_transaction_data *trd = &tr.transaction_data;
struct binder_work *w = NULL;
struct list_head *list = NULL;
struct binder_transaction *t = NULL;
struct binder_thread *t_from;
+ size_t trsize = sizeof(*trd);
binder_inner_proc_lock(proc);
if (!binder_worklist_empty_ilocked(&thread->todo))
@@ -4232,8 +4271,8 @@ retry:
if (t->buffer->target_node) {
struct binder_node *target_node = t->buffer->target_node;
- tr.target.ptr = target_node->ptr;
- tr.cookie = target_node->cookie;
+ trd->target.ptr = target_node->ptr;
+ trd->cookie = target_node->cookie;
t->saved_priority = task_nice(current);
if (t->priority < target_node->min_priority &&
!(t->flags & TF_ONE_WAY))
@@ -4243,22 +4282,23 @@ retry:
binder_set_nice(target_node->min_priority);
cmd = BR_TRANSACTION;
} else {
- tr.target.ptr = 0;
- tr.cookie = 0;
+ trd->target.ptr = 0;
+ trd->cookie = 0;
cmd = BR_REPLY;
}
- tr.code = t->code;
- tr.flags = t->flags;
- tr.sender_euid = from_kuid(current_user_ns(), t->sender_euid);
+ trd->code = t->code;
+ trd->flags = t->flags;
+ trd->sender_euid = from_kuid(current_user_ns(), t->sender_euid);
t_from = binder_get_txn_from(t);
if (t_from) {
struct task_struct *sender = t_from->proc->tsk;
- tr.sender_pid = task_tgid_nr_ns(sender,
- task_active_pid_ns(current));
+ trd->sender_pid =
+ task_tgid_nr_ns(sender,
+ task_active_pid_ns(current));
} else {
- tr.sender_pid = 0;
+ trd->sender_pid = 0;
}
ret = binder_apply_fd_fixups(t);
@@ -4289,15 +4329,20 @@ retry:
}
continue;
}
- tr.data_size = t->buffer->data_size;
- tr.offsets_size = t->buffer->offsets_size;
- tr.data.ptr.buffer = (binder_uintptr_t)
+ trd->data_size = t->buffer->data_size;
+ trd->offsets_size = t->buffer->offsets_size;
+ trd->data.ptr.buffer = (binder_uintptr_t)
((uintptr_t)t->buffer->data +
binder_alloc_get_user_buffer_offset(&proc->alloc));
- tr.data.ptr.offsets = tr.data.ptr.buffer +
+ trd->data.ptr.offsets = trd->data.ptr.buffer +
ALIGN(t->buffer->data_size,
sizeof(void *));
+ tr.secctx = t->security_ctx;
+ if (t->security_ctx) {
+ cmd = BR_TRANSACTION_SEC_CTX;
+ trsize = sizeof(tr);
+ }
if (put_user(cmd, (uint32_t __user *)ptr)) {
if (t_from)
binder_thread_dec_tmpref(t_from);
@@ -4308,7 +4353,7 @@ retry:
return -EFAULT;
}
ptr += sizeof(uint32_t);
- if (copy_to_user(ptr, &tr, sizeof(tr))) {
+ if (copy_to_user(ptr, &tr, trsize)) {
if (t_from)
binder_thread_dec_tmpref(t_from);
@@ -4317,7 +4362,7 @@ retry:
return -EFAULT;
}
- ptr += sizeof(tr);
+ ptr += trsize;
trace_binder_transaction_received(t);
binder_stat_br(proc, thread, cmd);
@@ -4325,16 +4370,18 @@ retry:
"%d:%d %s %d %d:%d, cmd %d size %zd-%zd ptr %016llx-%016llx\n",
proc->pid, thread->pid,
(cmd == BR_TRANSACTION) ? "BR_TRANSACTION" :
- "BR_REPLY",
+ (cmd == BR_TRANSACTION_SEC_CTX) ?
+ "BR_TRANSACTION_SEC_CTX" : "BR_REPLY",
t->debug_id, t_from ? t_from->proc->pid : 0,
t_from ? t_from->pid : 0, cmd,
t->buffer->data_size, t->buffer->offsets_size,
- (u64)tr.data.ptr.buffer, (u64)tr.data.ptr.offsets);
+ (u64)trd->data.ptr.buffer,
+ (u64)trd->data.ptr.offsets);
if (t_from)
binder_thread_dec_tmpref(t_from);
t->buffer->allow_user_free = 1;
- if (cmd == BR_TRANSACTION && !(t->flags & TF_ONE_WAY)) {
+ if (cmd != BR_REPLY && !(t->flags & TF_ONE_WAY)) {
binder_inner_proc_lock(thread->proc);
t->to_parent = thread->transaction_stack;
t->to_thread = thread;
@@ -4676,7 +4723,8 @@ out:
return ret;
}
-static int binder_ioctl_set_ctx_mgr(struct file *filp)
+static int binder_ioctl_set_ctx_mgr(struct file *filp,
+ struct flat_binder_object *fbo)
{
int ret = 0;
struct binder_proc *proc = filp->private_data;
@@ -4705,7 +4753,7 @@ static int binder_ioctl_set_ctx_mgr(stru
} else {
context->binder_context_mgr_uid = curr_euid;
}
- new_node = binder_new_node(proc, NULL);
+ new_node = binder_new_node(proc, fbo);
if (!new_node) {
ret = -ENOMEM;
goto out;
@@ -4828,8 +4876,20 @@ static long binder_ioctl(struct file *fi
binder_inner_proc_unlock(proc);
break;
}
+ case BINDER_SET_CONTEXT_MGR_EXT: {
+ struct flat_binder_object fbo;
+
+ if (copy_from_user(&fbo, ubuf, sizeof(fbo))) {
+ ret = -EINVAL;
+ goto err;
+ }
+ ret = binder_ioctl_set_ctx_mgr(filp, &fbo);
+ if (ret)
+ goto err;
+ break;
+ }
case BINDER_SET_CONTEXT_MGR:
- ret = binder_ioctl_set_ctx_mgr(filp);
+ ret = binder_ioctl_set_ctx_mgr(filp, NULL);
if (ret)
goto err;
break;
--- a/include/uapi/linux/android/binder.h
+++ b/include/uapi/linux/android/binder.h
@@ -41,6 +41,14 @@ enum {
enum {
FLAT_BINDER_FLAG_PRIORITY_MASK = 0xff,
FLAT_BINDER_FLAG_ACCEPTS_FDS = 0x100,
+
+ /**
+ * @FLAT_BINDER_FLAG_TXN_SECURITY_CTX: request security contexts
+ *
+ * Only when set, causes senders to include their security
+ * context
+ */
+ FLAT_BINDER_FLAG_TXN_SECURITY_CTX = 0x1000,
};
#ifdef BINDER_IPC_32BIT
@@ -218,6 +226,7 @@ struct binder_node_info_for_ref {
#define BINDER_VERSION _IOWR('b', 9, struct binder_version)
#define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info)
#define BINDER_GET_NODE_INFO_FOR_REF _IOWR('b', 12, struct binder_node_info_for_ref)
+#define BINDER_SET_CONTEXT_MGR_EXT _IOW('b', 13, struct flat_binder_object)
/*
* NOTE: Two special error codes you should check for when calling
@@ -276,6 +285,11 @@ struct binder_transaction_data {
} data;
};
+struct binder_transaction_data_secctx {
+ struct binder_transaction_data transaction_data;
+ binder_uintptr_t secctx;
+};
+
struct binder_transaction_data_sg {
struct binder_transaction_data transaction_data;
binder_size_t buffers_size;
@@ -311,6 +325,11 @@ enum binder_driver_return_protocol {
BR_OK = _IO('r', 1),
/* No parameters! */
+ BR_TRANSACTION_SEC_CTX = _IOR('r', 2,
+ struct binder_transaction_data_secctx),
+ /*
+ * binder_transaction_data_secctx: the received command.
+ */
BR_TRANSACTION = _IOR('r', 2, struct binder_transaction_data),
BR_REPLY = _IOR('r', 3, struct binder_transaction_data),
/*
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rajasingh Thavamani <[email protected]>
[ Upstream commit 232ba3a51cc224b339c7114888ed7f0d4d95695e ]
With Micrel KSZ8061 PHY, the link may occasionally not come up after
Ethernet cable connect. The vendor's (Microchip, former Micrel) errata
sheet 80000688A.pdf descripes the problem and possible workarounds in
detail, see below.
The batch implements workaround 1, which permanently fixes the issue.
DESCRIPTION
Link-up may not occur properly when the Ethernet cable is initially
connected. This issue occurs more commonly when the cable is connected
slowly, but it may occur any time a cable is connected. This issue occurs
in the auto-negotiation circuit, and will not occur if auto-negotiation
is disabled (which requires that the two link partners be set to the
same speed and duplex).
END USER IMPLICATIONS
When this issue occurs, link is not established. Subsequent cable
plug/unplaug cycle will not correct the issue.
WORk AROUND
There are four approaches to work around this issue:
1. This issue can be prevented by setting bit 15 in MMD device address 1,
register 2, prior to connecting the cable or prior to setting the
Restart Auto-negotiation bit in register 0h. The MMD registers are
accessed via the indirect access registers Dh and Eh, or via the Micrel
EthUtil utility as shown here:
. if using the EthUtil utility (usually with a Micrel KSZ8061
Evaluation Board), type the following commands:
> address 1
> mmd 1
> iw 2 b61a
. Alternatively, write the following registers to write to the
indirect MMD register:
Write register Dh, data 0001h
Write register Eh, data 0002h
Write register Dh, data 4001h
Write register Eh, data B61Ah
2. The issue can be avoided by disabling auto-negotiation in the KSZ8061,
either by the strapping option, or by clearing bit 12 in register 0h.
Care must be taken to ensure that the KSZ8061 and the link partner
will link with the same speed and duplex. Note that the KSZ8061
defaults to full-duplex when auto-negotiation is off, but other
devices may default to half-duplex in the event of failed
auto-negotiation.
3. The issue can be avoided by connecting the cable prior to powering-up
or resetting the KSZ8061, and leaving it plugged in thereafter.
4. If the above measures are not taken and the problem occurs, link can
be recovered by setting the Restart Auto-Negotiation bit in
register 0h, or by resetting or power cycling the device. Reset may
be either hardware reset or software reset (register 0h, bit 15).
PLAN
This errata will not be corrected in the future revision.
Fixes: 7ab59dc15e2f ("drivers/net/phy/micrel_phy: Add support for new PHYs")
Signed-off-by: Alexander Onnasch <[email protected]>
Signed-off-by: Rajasingh Thavamani <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/micrel.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -339,6 +339,17 @@ static int ksz8041_config_aneg(struct ph
return genphy_config_aneg(phydev);
}
+static int ksz8061_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+ if (ret)
+ return ret;
+
+ return kszphy_config_init(phydev);
+}
+
static int ksz9021_load_values_from_of(struct phy_device *phydev,
const struct device_node *of_node,
u16 reg,
@@ -1044,7 +1055,7 @@ static struct phy_driver ksphy_driver[]
.phy_id_mask = MICREL_PHY_ID_MASK,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = ksz8061_config_init,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.suspend = genphy_suspend,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit 87c11f1ddbbad38ad8bad47af133a8208985fbdf ]
Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.
Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].
Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.
[1]
[ 157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[ 157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[ 157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[ 157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ 157.460461] Call Trace:
[ 157.460486] dump_stack+0xf9/0x1be
[ 157.460553] check_preemption_disabled+0x1d6/0x200
[ 157.460576] ip6mr_forward2+0x73e/0x10e0
[ 157.460705] ip6_mr_forward+0x9a0/0x1510
[ 157.460771] ip6mr_mfc_add+0x16b3/0x1e00
[ 157.461155] ip6_mroute_setsockopt+0x3cb/0x13c0
[ 157.461384] do_ipv6_setsockopt.isra.8+0x348/0x4060
[ 157.462013] ipv6_setsockopt+0x90/0x110
[ 157.462036] rawv6_setsockopt+0x4a/0x120
[ 157.462058] __sys_setsockopt+0x16b/0x340
[ 157.462198] __x64_sys_setsockopt+0xbf/0x160
[ 157.462220] do_syscall_64+0x14d/0x610
[ 157.462349] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Amit Cohen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6mr.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1964,10 +1964,10 @@ int ip6mr_compat_ioctl(struct sock *sk,
static inline int ip6mr_forward2_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
- __IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_OUTFORWDATAGRAMS);
- __IP6_ADD_STATS(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_OUTOCTETS, skb->len);
+ IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTFORWDATAGRAMS);
+ IP6_ADD_STATS(net, ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTOCTETS, skb->len);
return dst_output(net, sk, skb);
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kavya Sree Kotagiri <[email protected]>
[ Upstream commit 084e5bb16bd7dc2b551bbd9fb358bf73e03ee8d8 ]
When Ocelot phy-mode is QSGMII, all 4 ports involved in
QSGMII shall be kept out of reset and
Tx lanes shall be enabled to pass the data.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Kavya Sree Kotagiri <[email protected]>
Signed-off-by: Steen Hegelund <[email protected]>
Co-developed-by: Steen Hegelund <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot_board.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mscc/ocelot_board.c
+++ b/drivers/net/ethernet/mscc/ocelot_board.c
@@ -266,6 +266,7 @@ static int mscc_ocelot_probe(struct plat
struct phy *serdes;
void __iomem *regs;
char res_name[8];
+ int phy_mode;
u32 port;
if (of_property_read_u32(portnp, "reg", &port))
@@ -291,11 +292,11 @@ static int mscc_ocelot_probe(struct plat
if (err)
return err;
- err = of_get_phy_mode(portnp);
- if (err < 0)
+ phy_mode = of_get_phy_mode(portnp);
+ if (phy_mode < 0)
ocelot->ports[port]->phy_mode = PHY_INTERFACE_MODE_NA;
else
- ocelot->ports[port]->phy_mode = err;
+ ocelot->ports[port]->phy_mode = phy_mode;
switch (ocelot->ports[port]->phy_mode) {
case PHY_INTERFACE_MODE_NA:
@@ -303,6 +304,13 @@ static int mscc_ocelot_probe(struct plat
case PHY_INTERFACE_MODE_SGMII:
break;
case PHY_INTERFACE_MODE_QSGMII:
+ /* Ensure clock signals and speed is set on all
+ * QSGMII links
+ */
+ ocelot_port_writel(ocelot->ports[port],
+ DEV_CLOCK_CFG_LINK_SPEED
+ (OCELOT_SPEED_1000),
+ DEV_CLOCK_CFG);
break;
default:
dev_err(ocelot->dev,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
[ Upstream commit 895a5e96dbd6386c8e78e5b78e067dcc67b7f0ab ]
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff ........ .......
backtrace:
[<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
[<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
[<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
[<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
[<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
[<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
[<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
[<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
[<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
[<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000115be9bb>] 0xffffffffffffffff
It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.
Reported-by: Hulk Robot <[email protected]>
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net-sysfs.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1547,6 +1547,9 @@ static int register_queue_kobjects(struc
error:
netdev_queue_update_kobjects(dev, txq, 0);
net_rx_queue_update_kobjects(dev, rxq, 0);
+#ifdef CONFIG_SYSFS
+ kset_unregister(dev->queues_kset);
+#endif
return error;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
[ Upstream commit b33b7cd6fd86478dd2890a9abeb6f036aa01fdf7 ]
Some sky2 chips fire IRQ after S3, before the driver is fully resumed:
[ 686.804877] do_IRQ: 1.37 No irq handler for vector
This is likely a platform bug that device isn't fully quiesced during
S3. Use MSI-X, maskable MSI or INTx can prevent this issue from
happening.
Since MSI-X and maskable MSI are not supported by this device, fallback
to use INTx on affected platforms.
BugLink: https://bugs.launchpad.net/bugs/1807259
BugLink: https://bugs.launchpad.net/bugs/1809843
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/sky2.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -46,6 +46,7 @@
#include <linux/mii.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
+#include <linux/dmi.h>
#include <asm/irq.h>
@@ -93,7 +94,7 @@ static int copybreak __read_mostly = 128
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-static int disable_msi = 0;
+static int disable_msi = -1;
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
@@ -4931,6 +4932,24 @@ static const char *sky2_name(u8 chipid,
return buf;
}
+static const struct dmi_system_id msi_blacklist[] = {
+ {
+ .ident = "Dell Inspiron 1545",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"),
+ },
+ },
+ {
+ .ident = "Gateway P-79",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P-79"),
+ },
+ },
+ {}
+};
+
static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *dev, *dev1;
@@ -5042,6 +5061,9 @@ static int sky2_probe(struct pci_dev *pd
goto err_out_free_pci;
}
+ if (disable_msi == -1)
+ disable_msi = !!dmi_check_system(msi_blacklist);
+
if (!disable_msi && pci_enable_msi(pdev) == 0) {
err = sky2_test_msi(hw);
if (err) {
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Igor Druzhinin <[email protected]>
[ Upstream commit 99e87f56b48f490fb16b6e0f74691c1e664dea95 ]
Zero-copy callback flag is not yet set on frag list skb at the moment
xenvif_handle_frag_list() returns -ENOMEM. This eventually results in
leaking grant ref mappings since xenvif_zerocopy_callback() is never
called for these fragments. Those eventually build up and cause Xen
to kill Dom0 as the slots get reused for new mappings:
"d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005"
That behavior is observed under certain workloads where sudden spikes
of page cache writes coexist with active atomic skb allocations from
network traffic. Additionally, rework the logic to deal with frag_list
deallocation in a single place.
Signed-off-by: Paul Durrant <[email protected]>
Signed-off-by: Igor Druzhinin <[email protected]>
Acked-by: Wei Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/netback.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1072,11 +1072,6 @@ static int xenvif_handle_frag_list(struc
skb_frag_size_set(&frags[i], len);
}
- /* Copied all the bits from the frag list -- free it. */
- skb_frag_list_init(skb);
- xenvif_skb_zerocopy_prepare(queue, nskb);
- kfree_skb(nskb);
-
/* Release all the original (foreign) frags. */
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
skb_frag_unref(skb, f);
@@ -1145,6 +1140,8 @@ static int xenvif_tx_submit(struct xenvi
xenvif_fill_frags(queue, skb);
if (unlikely(skb_has_frag_list(skb))) {
+ struct sk_buff *nskb = skb_shinfo(skb)->frag_list;
+ xenvif_skb_zerocopy_prepare(queue, nskb);
if (xenvif_handle_frag_list(queue, skb)) {
if (net_ratelimit())
netdev_err(queue->vif->dev,
@@ -1153,6 +1150,9 @@ static int xenvif_tx_submit(struct xenvi
kfree_skb(skb);
continue;
}
+ /* Copied all the bits from the frag list -- free it. */
+ skb_frag_list_init(skb);
+ kfree_skb(nskb);
}
skb->dev = queue->vif->dev;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Timur Celik <[email protected]>
[ Upstream commit ecef67cb10db7b83b3b71c61dbb29aa070ab0112 ]
Replace set_current_state with __set_current_state since no memory
barrier is needed at this point.
Signed-off-by: Timur Celik <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2165,7 +2165,7 @@ static void *tun_ring_recv(struct tun_fi
schedule();
}
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
remove_wait_queue(&tfile->wq.wait, &wait);
out:
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Hugne <[email protected]>
[ Upstream commit 0e63208915a8d7590d0a6218dadb2a6a00ac705a ]
Fix regression bug introduced in
commit 365ad353c256 ("tipc: reduce risk of user starvation during link
congestion")
Only signal -EDESTADDRREQ for RDM/DGRAM if we don't have a cached
sockaddr.
Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Erik Hugne <[email protected]>
Signed-off-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/socket.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1320,7 +1320,7 @@ static int __tipc_sendmsg(struct socket
if (unlikely(!dest)) {
dest = &tsk->peer;
- if (!syn || dest->family != AF_TIPC)
+ if (!syn && dest->family != AF_TIPC)
return -EDESTADDRREQ;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit a1fd1ad2552fad9e649eeb85fd79301e2880a886 ]
ip_route_input_rcu expects the original ingress device (e.g., for
proper multicast handling). The skb->dev can be changed by l3mdev_ip_rcv,
so dev needs to be saved prior to calling it. This was the behavior prior
to the listify changes.
Fixes: 5fa12739a53d0 ("net: ipv4: listify ip_rcv_finish")
Cc: Edward Cree <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_input.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -308,11 +308,10 @@ drop:
}
static int ip_rcv_finish_core(struct net *net, struct sock *sk,
- struct sk_buff *skb)
+ struct sk_buff *skb, struct net_device *dev)
{
const struct iphdr *iph = ip_hdr(skb);
int (*edemux)(struct sk_buff *skb);
- struct net_device *dev = skb->dev;
struct rtable *rt;
int err;
@@ -401,6 +400,7 @@ drop_error:
static int ip_rcv_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
+ struct net_device *dev = skb->dev;
int ret;
/* if ingress device is enslaved to an L3 master device pass the
@@ -410,7 +410,7 @@ static int ip_rcv_finish(struct net *net
if (!skb)
return NET_RX_SUCCESS;
- ret = ip_rcv_finish_core(net, sk, skb);
+ ret = ip_rcv_finish_core(net, sk, skb, dev);
if (ret != NET_RX_DROP)
ret = dst_input(skb);
return ret;
@@ -546,6 +546,7 @@ static void ip_list_rcv_finish(struct ne
INIT_LIST_HEAD(&sublist);
list_for_each_entry_safe(skb, next, head, list) {
+ struct net_device *dev = skb->dev;
struct dst_entry *dst;
skb_list_del_init(skb);
@@ -555,7 +556,7 @@ static void ip_list_rcv_finish(struct ne
skb = l3mdev_ip_rcv(skb);
if (!skb)
continue;
- if (ip_rcv_finish_core(net, sk, skb) == NET_RX_DROP)
+ if (ip_rcv_finish_core(net, sk, skb, dev) == NET_RX_DROP)
continue;
dst = skb_dst(skb);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit ed8fe20205ac054bf585156709de3913d1890f30 ]
When debugging another issue I faced an interrupt storm in this
driver (88E6390, port 9 in SGMII mode), consisting of alternating
link-up / link-down interrupts. Analysis showed that the driver
wanted to set a cmode that was set already. But so far
mv88e6390x_port_set_cmode() doesn't check this and powers down
SERDES, what causes the link to break, and eventually results in
the described interrupt storm.
Fix this by checking whether the cmode actually changes. We want
that the very first call to mv88e6390x_port_set_cmode() always
configures the registers, therefore initialize port.cmode with
a value that is different from any supported cmode value.
We have to take care that we only init the ports cmode once
chip->info->num_ports is set.
v2:
- add small helper and init the number of actual ports only
Fixes: 364e9d7776a3 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change")
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 10 ++++++++++
drivers/net/dsa/mv88e6xxx/port.c | 4 ++++
drivers/net/dsa/mv88e6xxx/port.h | 1 +
3 files changed, 15 insertions(+)
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -4579,6 +4579,14 @@ static int mv88e6xxx_smi_init(struct mv8
return 0;
}
+static void mv88e6xxx_ports_cmode_init(struct mv88e6xxx_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < mv88e6xxx_num_ports(chip); i++)
+ chip->ports[i].cmode = MV88E6XXX_PORT_STS_CMODE_INVALID;
+}
+
static enum dsa_tag_protocol mv88e6xxx_get_tag_protocol(struct dsa_switch *ds,
int port)
{
@@ -4615,6 +4623,8 @@ static const char *mv88e6xxx_drv_probe(s
if (err)
goto free;
+ mv88e6xxx_ports_cmode_init(chip);
+
mutex_lock(&chip->reg_lock);
err = mv88e6xxx_switch_reset(chip);
mutex_unlock(&chip->reg_lock);
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -395,6 +395,10 @@ int mv88e6390x_port_set_cmode(struct mv8
cmode = 0;
}
+ /* cmode doesn't change, nothing to do for us */
+ if (cmode == chip->ports[port].cmode)
+ return 0;
+
lane = mv88e6390x_serdes_get_lane(chip, port);
if (lane < 0)
return lane;
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -52,6 +52,7 @@
#define MV88E6185_PORT_STS_CMODE_1000BASE_X 0x0005
#define MV88E6185_PORT_STS_CMODE_PHY 0x0006
#define MV88E6185_PORT_STS_CMODE_DISABLED 0x0007
+#define MV88E6XXX_PORT_STS_CMODE_INVALID 0xff
/* Offset 0x01: MAC (or PCS or Physical) Control Register */
#define MV88E6XXX_PORT_MAC_CTL 0x01
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniele Palmas <[email protected]>
commit 6431866b6707d27151be381252d6eef13025cfce upstream.
This patch adds Telit ME910 family ECM composition 0x1102.
Signed-off-by: Daniele Palmas <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1148,6 +1148,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
.driver_info = NCTRL(0) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */
+ .driver_info = NCTRL(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Mironov <[email protected]>
commit dd9d3d86b08d6a106830364879c42c78db85389c upstream.
Here is how this device appears in kernel log:
usb 3-1: new full-speed USB device number 18 using xhci_hcd
usb 3-1: New USB device found, idVendor=0b00, idProduct=3070
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Ingenico 3070
usb 3-1: Manufacturer: Silicon Labs
usb 3-1: SerialNumber: 0001
Apparently this is a POS terminal with embedded USB-to-Serial converter.
Cc: [email protected]
Signed-off-by: Ivan Mironov <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -61,6 +61,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
+ { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
commit 7077fffcb0b0b65dc75e341306aeef4d0e7f2ec6 upstream.
Currently, this will hit a BUG_ON for these symlinks as follows:
- kernel message
------------[ cut here ]------------
kernel BUG at drivers/staging/erofs/xattr.c:59!
SMP PTI
CPU: 1 PID: 1170 Comm: getllxattr Not tainted 4.20.0-rc6+ #92
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
RIP: 0010:init_inode_xattrs+0x22b/0x270
Code: 48 0f 45 ea f0 ff 4d 34 74 0d 41 83 4c 24 e0 01 31 c0 e9 00 fe ff ff 48 89 ef e8 e0 31 9e ff eb e9 89 e8 e9 ef fd ff ff 0f 0$
<0f> 0b 48 89 ef e8 fb f6 9c ff 48 8b 45 08 a8 01 75 24 f0 ff 4d 34
RSP: 0018:ffffa03ac026bdf8 EFLAGS: 00010246
------------[ cut here ]------------
...
Call Trace:
erofs_listxattr+0x30/0x2c0
? selinux_inode_listxattr+0x5a/0x80
? kmem_cache_alloc+0x33/0x170
? security_inode_listxattr+0x27/0x40
listxattr+0xaf/0xc0
path_listxattr+0x5a/0xa0
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
---[ end trace 3c24b49408dc0c72 ]---
Fix it by checking ->xattr_isize in init_inode_xattrs(),
and it also fixes improper return value -ENOTSUPP
(it should be -ENODATA if xattr is enabled) for those inodes.
Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <[email protected]> # 4.19+
Reported-by: Li Guifu <[email protected]>
Tested-by: Li Guifu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/inode.c | 8 ++++----
drivers/staging/erofs/xattr.c | 25 ++++++++++++++++++++-----
2 files changed, 24 insertions(+), 9 deletions(-)
--- a/drivers/staging/erofs/inode.c
+++ b/drivers/staging/erofs/inode.c
@@ -185,16 +185,16 @@ static int fill_inode(struct inode *inod
/* setup the new inode */
if (S_ISREG(inode->i_mode)) {
#ifdef CONFIG_EROFS_FS_XATTR
- if (vi->xattr_isize)
- inode->i_op = &erofs_generic_xattr_iops;
+ inode->i_op = &erofs_generic_xattr_iops;
#endif
inode->i_fop = &generic_ro_fops;
} else if (S_ISDIR(inode->i_mode)) {
inode->i_op =
#ifdef CONFIG_EROFS_FS_XATTR
- vi->xattr_isize ? &erofs_dir_xattr_iops :
-#endif
+ &erofs_dir_xattr_iops;
+#else
&erofs_dir_iops;
+#endif
inode->i_fop = &erofs_dir_fops;
} else if (S_ISLNK(inode->i_mode)) {
/* by default, page_get_link is used for symlink */
--- a/drivers/staging/erofs/xattr.c
+++ b/drivers/staging/erofs/xattr.c
@@ -56,7 +56,26 @@ static int init_inode_xattrs(struct inod
return 0;
vi = EROFS_V(inode);
- BUG_ON(!vi->xattr_isize);
+
+ /*
+ * bypass all xattr operations if ->xattr_isize is not greater than
+ * sizeof(struct erofs_xattr_ibody_header), in detail:
+ * 1) it is not enough to contain erofs_xattr_ibody_header then
+ * ->xattr_isize should be 0 (it means no xattr);
+ * 2) it is just to contain erofs_xattr_ibody_header, which is on-disk
+ * undefined right now (maybe use later with some new sb feature).
+ */
+ if (vi->xattr_isize == sizeof(struct erofs_xattr_ibody_header)) {
+ errln("xattr_isize %d of nid %llu is not supported yet",
+ vi->xattr_isize, vi->nid);
+ return -ENOTSUPP;
+ } else if (vi->xattr_isize < sizeof(struct erofs_xattr_ibody_header)) {
+ if (unlikely(vi->xattr_isize)) {
+ DBG_BUGON(1);
+ return -EIO; /* xattr ondisk layout error */
+ }
+ return -ENOATTR;
+ }
sb = inode->i_sb;
sbi = EROFS_SB(sb);
@@ -422,7 +441,6 @@ static int erofs_xattr_generic_get(const
struct dentry *unused, struct inode *inode,
const char *name, void *buffer, size_t size)
{
- struct erofs_vnode *const vi = EROFS_V(inode);
struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
switch (handler->flags) {
@@ -440,9 +458,6 @@ static int erofs_xattr_generic_get(const
return -EINVAL;
}
- if (!vi->xattr_isize)
- return -ENOATTR;
-
return erofs_getxattr(inode, handler->flags, name, buffer, size);
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit 6191da98062d25276a3b88fb2a94dcbcfb3ea65d ]
when act_skbedit was converted to use RCU in the data plane, we added an
error path, but we forgot to drop the action refcount in case of failure
during a 'replace' operation:
# tc actions add action skbedit ptype otherhost pass index 100
# tc action show action skbedit
total acts 1
action order 0: skbedit ptype otherhost pass
index 100 ref 1 bind 0
# tc actions replace action skbedit ptype otherhost drop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action show action skbedit
total acts 1
action order 0: skbedit ptype otherhost pass
index 100 ref 2 bind 0
Ensure we call tcf_idr_release(), in case 'params_new' allocation failed,
also when the action is being replaced.
Fixes: c749cdda9089 ("net/sched: act_skbedit: don't use spinlock in the data path")
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_skbedit.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/sched/act_skbedit.c
+++ b/net/sched/act_skbedit.c
@@ -189,8 +189,7 @@ static int tcf_skbedit_init(struct net *
params_new = kzalloc(sizeof(*params_new), GFP_KERNEL);
if (unlikely(!params_new)) {
- if (ret == ACT_P_CREATED)
- tcf_idr_release(*a, bind);
+ tcf_idr_release(*a, bind);
return -ENOMEM;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mao Wenan <[email protected]>
[ Upstream commit 07f12b26e21ab359261bf75cfcb424fdc7daeb6d ]
If register_netdev() is failed to register sitn->fb_tunnel_dev,
it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).
BUG: memory leak
unreferenced object 0xffff888378daad00 (size 512):
comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
hex dump (first 32 bytes):
00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
[<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
[<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
[<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
[<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
[<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
[<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
[<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
[<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
[<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
[<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
[<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
[<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
[<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<0000000039acff8a>] 0xffffffffffffffff
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1873,6 +1873,7 @@ static int __net_init sit_init_net(struc
err_reg_dev:
ipip6_dev_free(sitn->fb_tunnel_dev);
+ free_netdev(sitn->fb_tunnel_dev);
err_alloc_dev:
return err;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Davide Caratti <[email protected]>
[ Upstream commit 8f67c90ee9148eab3d2b4393c3cf76489b27f87c ]
After commit 4e8ddd7f1758 ("net: sched: don't release reference on action
overwrite"), the error path of all actions was converted to drop refcount
also when the action was being overwritten. But we forgot act_ipt_init(),
in case allocation of 'tname' was not successful:
# tc action add action xt -j LOG --log-prefix hello index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "hello" index 100
# tc action show action xt
total acts 1
action order 0: tablename: mangle hook: NF_IP_POST_ROUTING
target LOG level warning prefix "hello"
index 100 ref 1 bind 0
# tc action replace action xt -j LOG --log-prefix world index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "world" index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action show action xt
total acts 1
action order 0: tablename: mangle hook: NF_IP_POST_ROUTING
target LOG level warning prefix "hello"
index 100 ref 2 bind 0
Ensure we call tcf_idr_release(), in case 'tname' allocation failed, also
when the action is being replaced.
Fixes: 4e8ddd7f1758 ("net: sched: don't release reference on action overwrite")
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_ipt.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/sched/act_ipt.c
+++ b/net/sched/act_ipt.c
@@ -199,8 +199,7 @@ err3:
err2:
kfree(tname);
err1:
- if (ret == ACT_P_CREATED)
- tcf_idr_release(*a, bind);
+ tcf_idr_release(*a, bind);
return err;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiaxun Yang <[email protected]>
commit 0237199186e7a4aa5310741f0a6498a20c820fd7 upstream.
Some F17h models do not have CPB set in CPUID even though the CPU
supports it. Set the feature bit unconditionally on all F17h.
[ bp: Rewrite commit message and patch. ]
Signed-off-by: Jiaxun Yang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Sherry Hurwitz <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/amd.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -818,11 +818,9 @@ static void init_amd_bd(struct cpuinfo_x
static void init_amd_zn(struct cpuinfo_x86 *c)
{
set_cpu_cap(c, X86_FEATURE_ZEN);
- /*
- * Fix erratum 1076: CPB feature bit not being set in CPUID. It affects
- * all up to and including B1.
- */
- if (c->x86_model <= 1 && c->x86_stepping <= 1)
+
+ /* Fix erratum 1076: CPB feature bit not being set in CPUID. */
+ if (!cpu_has(c, X86_FEATURE_CPB))
set_cpu_cap(c, X86_FEATURE_CPB);
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill A. Shutemov <[email protected]>
commit 6f913de3231e1d70a871135b38219da7810df218 upstream.
EFI systems do not necessarily provide a legacy ROM. If the ROM is missing
the memory is not mapped at all.
Trying to dereference values in the legacy ROM area leads to a crash on
Macbook Pro.
Only look for values in the legacy ROM area for non-EFI system.
Fixes: 3548e131ec6a ("x86/boot/compressed/64: Find a place for 32-bit trampoline")
Reported-by: Pitam Mitra <[email protected]>
Signed-off-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Bockjoo Kim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202351
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/boot/compressed/pgtable_64.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -1,5 +1,7 @@
+#include <linux/efi.h>
#include <asm/e820/types.h>
#include <asm/processor.h>
+#include <asm/efi.h>
#include "pgtable.h"
#include "../string.h"
@@ -37,9 +39,10 @@ int cmdline_find_option_bool(const char
static unsigned long find_trampoline_placement(void)
{
- unsigned long bios_start, ebda_start;
+ unsigned long bios_start = 0, ebda_start = 0;
unsigned long trampoline_start;
struct boot_e820_entry *entry;
+ char *signature;
int i;
/*
@@ -47,8 +50,18 @@ static unsigned long find_trampoline_pla
* This code is based on reserve_bios_regions().
*/
- ebda_start = *(unsigned short *)0x40e << 4;
- bios_start = *(unsigned short *)0x413 << 10;
+ /*
+ * EFI systems may not provide legacy ROM. The memory may not be mapped
+ * at all.
+ *
+ * Only look for values in the legacy ROM for non-EFI system.
+ */
+ signature = (char *)&boot_params->efi_info.efi_loader_signature;
+ if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) &&
+ strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) {
+ ebda_start = *(unsigned short *)0x40e << 4;
+ bios_start = *(unsigned short *)0x413 << 10;
+ }
if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
bios_start = BIOS_START_MAX;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
[ Upstream commit ff7b11aa481f682e0e9711abfeb7d03f5cd612bf ]
Commit 9060cb719e61 ("net: crypto set sk to NULL when af_alg_release.")
fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is
closed concurrently with fchownat(). However, it ignored that many
other proto_ops::release() methods don't set sock->sk to NULL and
therefore allow the same use-after-free:
- base_sock_release
- bnep_sock_release
- cmtp_sock_release
- data_sock_release
- dn_release
- hci_sock_release
- hidp_sock_release
- iucv_sock_release
- l2cap_sock_release
- llcp_sock_release
- llc_ui_release
- rawsock_release
- rfcomm_sock_release
- sco_sock_release
- svc_release
- vcc_release
- x25_release
Rather than fixing all these and relying on every socket type to get
this right forever, just make __sock_release() set sock->sk to NULL
itself after calling proto_ops::release().
Reproducer that produces the KASAN splat when any of these socket types
are configured into the kernel:
#include <pthread.h>
#include <stdlib.h>
#include <sys/socket.h>
#include <unistd.h>
pthread_t t;
volatile int fd;
void *close_thread(void *arg)
{
for (;;) {
usleep(rand() % 100);
close(fd);
}
}
int main()
{
pthread_create(&t, NULL, close_thread, NULL);
for (;;) {
fd = socket(rand() % 50, rand() % 11, 0);
fchownat(fd, "", 1000, 1000, 0x1000);
close(fd);
}
}
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/socket.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/socket.c
+++ b/net/socket.c
@@ -577,6 +577,7 @@ static void __sock_release(struct socket
if (inode)
inode_lock(inode);
sock->ops->release(sock);
+ sock->sk = NULL;
if (inode)
inode_unlock(inode);
sock->ops = NULL;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit d7ac3c6ef5d8ce14b6381d52eb7adafdd6c8bb3c upstream.
IndexCard is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r]
drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap)
Fix this by sanitizing IndexCard before using it to index apbs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/applicom.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -32,6 +32,7 @@
#include <linux/wait.h>
#include <linux/init.h>
#include <linux/fs.h>
+#include <linux/nospec.h>
#include <asm/io.h>
#include <linux/uaccess.h>
@@ -386,7 +387,11 @@ static ssize_t ac_write(struct file *fil
TicCard = st_loc.tic_des_from_pc; /* tic number to send */
IndexCard = NumCard - 1;
- if((NumCard < 1) || (NumCard > MAX_BOARD) || !apbs[IndexCard].RamIO)
+ if (IndexCard >= MAX_BOARD)
+ return -EINVAL;
+ IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+ if (!apbs[IndexCard].RamIO)
return -EINVAL;
#ifdef DEBUG
@@ -697,6 +702,7 @@ static long ac_ioctl(struct file *file,
unsigned char IndexCard;
void __iomem *pmem;
int ret = 0;
+ static int warncount = 10;
volatile unsigned char byte_reset_it;
struct st_ram_io *adgl;
void __user *argp = (void __user *)arg;
@@ -711,16 +717,12 @@ static long ac_ioctl(struct file *file,
mutex_lock(&ac_mutex);
IndexCard = adgl->num_card-1;
- if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
- static int warncount = 10;
- if (warncount) {
- printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
- warncount--;
- }
- kfree(adgl);
- mutex_unlock(&ac_mutex);
- return -EINVAL;
- }
+ if (cmd != 6 && IndexCard >= MAX_BOARD)
+ goto err;
+ IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
+
+ if (cmd != 6 && !apbs[IndexCard].RamIO)
+ goto err;
switch (cmd) {
@@ -838,5 +840,16 @@ static long ac_ioctl(struct file *file,
kfree(adgl);
mutex_unlock(&ac_mutex);
return 0;
+
+err:
+ if (warncount) {
+ pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
+ (int)IndexCard + 1);
+ warncount--;
+ }
+ kfree(adgl);
+ mutex_unlock(&ac_mutex);
+ return -EINVAL;
+
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit d90b88fd3653f1fb66ecc6571b860d5a5749fa56 upstream.
Stack unwinding is implemented incorrectly in xtensa get_wchan: instead
of extracting a0 and a1 registers from the spill location under the
stack pointer it extracts a word pointed to by the stack pointer and
subtracts 4 or 3 from it.
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/process.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -320,8 +320,8 @@ unsigned long get_wchan(struct task_stru
/* Stack layout: sp-4: ra, sp-3: sp' */
- pc = MAKE_PC_FROM_RA(*(unsigned long*)sp - 4, sp);
- sp = *(unsigned long *)sp - 3;
+ pc = MAKE_PC_FROM_RA(SPILL_SLOT(sp, 0), sp);
+ sp = SPILL_SLOT(sp, 1);
} while (count++ < 16);
return 0;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nazarov Sergey <[email protected]>
[ Upstream commit 3da1ed7ac398f34fff1694017a07054d69c5f5c5 ]
Extract IP options in cipso_v4_error and use __icmp_send.
Signed-off-by: Sergey Nazarov <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/ip.h | 2 ++
net/ipv4/cipso_ipv4.c | 17 +++++++++++++++--
net/ipv4/ip_options.c | 22 +++++++++++++++++-----
3 files changed, 34 insertions(+), 7 deletions(-)
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -665,6 +665,8 @@ static inline int ip_options_echo(struct
}
void ip_options_fragment(struct sk_buff *skb);
+int __ip_options_compile(struct net *net, struct ip_options *opt,
+ struct sk_buff *skb, __be32 *info);
int ip_options_compile(struct net *net, struct ip_options *opt,
struct sk_buff *skb);
int ip_options_get(struct net *net, struct ip_options_rcu **optp,
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1736,13 +1736,26 @@ validate_return:
*/
void cipso_v4_error(struct sk_buff *skb, int error, u32 gateway)
{
+ unsigned char optbuf[sizeof(struct ip_options) + 40];
+ struct ip_options *opt = (struct ip_options *)optbuf;
+
if (ip_hdr(skb)->protocol == IPPROTO_ICMP || error != -EACCES)
return;
+ /*
+ * We might be called above the IP layer,
+ * so we can not use icmp_send and IPCB here.
+ */
+
+ memset(opt, 0, sizeof(struct ip_options));
+ opt->optlen = ip_hdr(skb)->ihl*4 - sizeof(struct iphdr);
+ if (__ip_options_compile(dev_net(skb->dev), opt, skb, NULL))
+ return;
+
if (gateway)
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0);
+ __icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0, opt);
else
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0);
+ __icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0, opt);
}
/**
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -251,8 +251,9 @@ static void spec_dst_fill(__be32 *spec_d
* If opt == NULL, then skb->data should point to IP header.
*/
-int ip_options_compile(struct net *net,
- struct ip_options *opt, struct sk_buff *skb)
+int __ip_options_compile(struct net *net,
+ struct ip_options *opt, struct sk_buff *skb,
+ __be32 *info)
{
__be32 spec_dst = htonl(INADDR_ANY);
unsigned char *pp_ptr = NULL;
@@ -468,11 +469,22 @@ eol:
return 0;
error:
- if (skb) {
- icmp_send(skb, ICMP_PARAMETERPROB, 0, htonl((pp_ptr-iph)<<24));
- }
+ if (info)
+ *info = htonl((pp_ptr-iph)<<24);
return -EINVAL;
}
+
+int ip_options_compile(struct net *net,
+ struct ip_options *opt, struct sk_buff *skb)
+{
+ int ret;
+ __be32 info;
+
+ ret = __ip_options_compile(net, opt, skb, &info);
+ if (ret != 0 && skb)
+ icmp_send(skb, ICMP_PARAMETERPROB, 0, info);
+ return ret;
+}
EXPORT_SYMBOL(ip_options_compile);
/*
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luis Chamberlain <[email protected]>
commit 344c0152d878922365464b7140c74c2a5e073d99 upstream.
commit a6a9be9270c87 ("selftests: firmware: return Kselftest Skip code
for skipped tests") by Shuah modified failures to return the special
error code of $ksft_skip (4). We have a corner case issue where we
*do* want to verify_reqs().
Cc: <[email protected]> # >= 4.18
Fixes: a6a9be9270c87 ("selftests: firmware: return Kselftest Skip code for for skipped tests")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/firmware/fw_lib.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -91,7 +91,7 @@ verify_reqs()
if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo "usermode helper disabled so ignoring test"
- exit $ksft_skip
+ exit 0
fi
fi
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit e3818541b49fb88650ba339d33cc53e4095da5b3 ]
IPv6 currently does not support nexthops outside of the AF_INET6 family.
Specifically, it does not handle RTA_VIA attribute. If it is passed
in a route add request, the actual route added only uses the device
which is clearly not what the user intended:
$ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
$ ip ro ls
...
2001:db8:2::/64 dev eth0 metric 1024 pref medium
Catch this and fail the route add:
$ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0
Error: IPv6 does not support RTA_VIA attribute.
Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/route.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4163,6 +4163,10 @@ static int rtm_to_fib6_config(struct sk_
cfg->fc_gateway = nla_get_in6_addr(tb[RTA_GATEWAY]);
cfg->fc_flags |= RTF_GATEWAY;
}
+ if (tb[RTA_VIA]) {
+ NL_SET_ERR_MSG(extack, "IPv6 does not support RTA_VIA attribute");
+ goto errout;
+ }
if (tb[RTA_DST]) {
int plen = (rtm->rtm_dst_len + 7) >> 3;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Moore <[email protected]>
[ Upstream commit 5578de4834fe0f2a34fedc7374be691443396d1f ]
There are two array out-of-bounds memory accesses, one in
cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both
errors are embarassingly simple, and the fixes are straightforward.
As a FYI for anyone backporting this patch to kernels prior to v4.8,
you'll want to apply the netlbl_bitmap_walk() patch to
cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before
Linux v4.8.
Reported-by: Jann Horn <[email protected]>
Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Fixes: 3faa8f982f95 ("netlabel: Move bitmap manipulation functions to the NetLabel core.")
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/cipso_ipv4.c | 3 ++-
net/netlabel/netlabel_kapi.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -667,7 +667,8 @@ static int cipso_v4_map_lvl_valid(const
case CIPSO_V4_MAP_PASS:
return 0;
case CIPSO_V4_MAP_TRANS:
- if (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL)
+ if ((level < doi_def->map.std->lvl.cipso_size) &&
+ (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL))
return 0;
break;
}
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -903,7 +903,8 @@ int netlbl_bitmap_walk(const unsigned ch
(state == 0 && (byte & bitmask) == 0))
return bit_spot;
- bit_spot++;
+ if (++bit_spot >= bitmap_len)
+ return -1;
bitmask >>= 1;
if (bitmask == 0) {
byte = bitmap[++byte_offset];
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sheng Lan <[email protected]>
[ Upstream commit 5845f706388a4cde0f6b80f9e5d33527e942b7d9 ]
It can be reproduced by following steps:
1. virtio_net NIC is configured with gso/tso on
2. configure nginx as http server with an index file bigger than 1M bytes
3. use tc netem to produce duplicate packets and delay:
tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90%
4. continually curl the nginx http server to get index file on client
5. BUG_ON is seen quickly
[10258690.371129] kernel BUG at net/core/skbuff.c:4028!
[10258690.371748] invalid opcode: 0000 [#1] SMP PTI
[10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.0.0-rc6 #2
[10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202
[10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea
[10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002
[10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028
[10258690.372094] FS: 0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000
[10258690.372094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0
[10258690.372094] Call Trace:
[10258690.372094] <IRQ>
[10258690.372094] skb_to_sgvec+0x11/0x40
[10258690.372094] start_xmit+0x38c/0x520 [virtio_net]
[10258690.372094] dev_hard_start_xmit+0x9b/0x200
[10258690.372094] sch_direct_xmit+0xff/0x260
[10258690.372094] __qdisc_run+0x15e/0x4e0
[10258690.372094] net_tx_action+0x137/0x210
[10258690.372094] __do_softirq+0xd6/0x2a9
[10258690.372094] irq_exit+0xde/0xf0
[10258690.372094] smp_apic_timer_interrupt+0x74/0x140
[10258690.372094] apic_timer_interrupt+0xf/0x20
[10258690.372094] </IRQ>
In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's
linear data size and nonlinear data size, thus BUG_ON triggered.
Because the skb is cloned and a part of nonlinear data is split off.
Duplicate packet is cloned in netem_enqueue() and may be delayed
some time in qdisc. When qdisc len reached the limit and returns
NET_XMIT_DROP, the skb will be retransmit later in write queue.
the skb will be fragmented by tso_fragment(), the limit size
that depends on cwnd and mss decrease, the skb's nonlinear
data will be split off. The length of the skb cloned by netem
will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(),
the BUG_ON trigger.
To fix it, netem returns NET_XMIT_SUCCESS to upper stack
when it clones a duplicate packet.
Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()")
Signed-off-by: Sheng Lan <[email protected]>
Reported-by: Qin Ji <[email protected]>
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_netem.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -430,6 +430,7 @@ static int netem_enqueue(struct sk_buff
int nb = 0;
int count = 1;
int rc = NET_XMIT_SUCCESS;
+ int rc_drop = NET_XMIT_DROP;
/* Do not fool qdisc_drop_all() */
skb->prev = NULL;
@@ -469,6 +470,7 @@ static int netem_enqueue(struct sk_buff
q->duplicate = 0;
rootq->enqueue(skb2, rootq, to_free);
q->duplicate = dupsave;
+ rc_drop = NET_XMIT_SUCCESS;
}
/*
@@ -481,7 +483,7 @@ static int netem_enqueue(struct sk_buff
if (skb_is_gso(skb)) {
segs = netem_segment(skb, sch, to_free);
if (!segs)
- return NET_XMIT_DROP;
+ return rc_drop;
} else {
segs = skb;
}
@@ -504,8 +506,10 @@ static int netem_enqueue(struct sk_buff
1<<(prandom_u32() % 8);
}
- if (unlikely(sch->q.qlen >= sch->limit))
- return qdisc_drop_all(skb, sch, to_free);
+ if (unlikely(sch->q.qlen >= sch->limit)) {
+ qdisc_drop_all(skb, sch, to_free);
+ return rc_drop;
+ }
qdisc_qstats_backlog_inc(sch, skb);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <[email protected]>
[ Upstream commit 2b3c6885386020b1b9d92d45e8349637e27d1f66 ]
There have been reports of oversize UDP packets being sent to the
driver to be transmitted, causing error conditions. The issue is
likely caused by the dst of the SKB switching between 'lo' with
64K MTU and the hardware device with a smaller MTU. Patches are
being proposed by Mahesh Bandewar <[email protected]> to fix the
issue.
In the meantime, add a quick length check in the driver to prevent
the error. The driver uses the TX packet size as index to look up an
array to setup the TX BD. The array is large enough to support all MTU
sizes supported by the driver. The oversize TX packet causes the
driver to index beyond the array and put garbage values into the
TX BD. Add a simple check to prevent this.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -497,6 +497,12 @@ normal_tx:
}
length >>= 9;
+ if (unlikely(length >= ARRAY_SIZE(bnxt_lhint_arr))) {
+ dev_warn_ratelimited(&pdev->dev, "Dropped oversize %d bytes TX packet.\n",
+ skb->len);
+ i = 0;
+ goto tx_dma_error;
+ }
flags |= bnxt_lhint_arr[length];
txbd->tx_bd_len_flags_type = cpu_to_le32(flags);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Xiang <[email protected]>
commit 72faa7a773ca59336f3c889e878de81445c5a85c upstream.
The irq_pages is the number of pages for irq stack, but not the
order which is needed by __get_free_pages().
We can use get_order() to calculate the accurate order.
Signed-off-by: Liu Xiang <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Fixes: fe8bd18ffea5 ("MIPS: Introduce irq_stack")
Cc: [email protected]
Cc: [email protected] # v4.11+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/irq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -52,6 +52,7 @@ asmlinkage void spurious_interrupt(void)
void __init init_IRQ(void)
{
int i;
+ unsigned int order = get_order(IRQ_STACK_SIZE);
for (i = 0; i < NR_IRQS; i++)
irq_set_noprobe(i);
@@ -62,8 +63,7 @@ void __init init_IRQ(void)
arch_init_irq();
for_each_possible_cpu(i) {
- int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
- void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
+ void *s = (void *)__get_free_pages(GFP_KERNEL, order);
irq_stack[i] = s;
pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 82f844c22588bf47132c82faeda50b6db473162c upstream.
Make sure the receiver is powered (and booted) before enabling the
wakeup interrupt to avoid spurious interrupts due to a floating input.
Similarly, disable the interrupt before powering off on probe errors and
on unbind.
Fixes: d2efbbd18b1e ("gnss: add driver for sirfstar-based receivers")
Cc: stable <[email protected]> # 4.19
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gnss/sirf.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
--- a/drivers/gnss/sirf.c
+++ b/drivers/gnss/sirf.c
@@ -310,30 +310,26 @@ static int sirf_probe(struct serdev_devi
ret = -ENODEV;
goto err_put_device;
}
+
+ ret = regulator_enable(data->vcc);
+ if (ret)
+ goto err_put_device;
+
+ /* Wait for chip to boot into hibernate mode. */
+ msleep(SIRF_BOOT_DELAY);
}
if (data->wakeup) {
ret = gpiod_to_irq(data->wakeup);
if (ret < 0)
- goto err_put_device;
-
+ goto err_disable_vcc;
data->irq = ret;
- ret = devm_request_threaded_irq(dev, data->irq, NULL,
- sirf_wakeup_handler,
+ ret = request_threaded_irq(data->irq, NULL, sirf_wakeup_handler,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"wakeup", data);
if (ret)
- goto err_put_device;
- }
-
- if (data->on_off) {
- ret = regulator_enable(data->vcc);
- if (ret)
- goto err_put_device;
-
- /* Wait for chip to boot into hibernate mode */
- msleep(SIRF_BOOT_DELAY);
+ goto err_disable_vcc;
}
if (IS_ENABLED(CONFIG_PM)) {
@@ -342,7 +338,7 @@ static int sirf_probe(struct serdev_devi
} else {
ret = sirf_runtime_resume(dev);
if (ret < 0)
- goto err_disable_vcc;
+ goto err_free_irq;
}
ret = gnss_register_device(gdev);
@@ -356,6 +352,9 @@ err_disable_rpm:
pm_runtime_disable(dev);
else
sirf_runtime_suspend(dev);
+err_free_irq:
+ if (data->wakeup)
+ free_irq(data->irq, data);
err_disable_vcc:
if (data->on_off)
regulator_disable(data->vcc);
@@ -376,6 +375,9 @@ static void sirf_remove(struct serdev_de
else
sirf_runtime_suspend(&serdev->dev);
+ if (data->wakeup)
+ free_irq(data->irq, data);
+
if (data->on_off)
regulator_disable(data->vcc);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
commit 3612af783cf52c74a031a2f11b82247b2599d3cd upstream.
Marek reported that he saw an issue with the below snippet in that
timing measurements where off when loaded as unpriv while results
were reasonable when loaded as privileged:
[...]
uint64_t a = bpf_ktime_get_ns();
uint64_t b = bpf_ktime_get_ns();
uint64_t delta = b - a;
if ((int64_t)delta > 0) {
[...]
Turns out there is a bug where a corner case is missing in the fix
d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar
type from different paths"), namely fixup_bpf_calls() only checks
whether aux has a non-zero alu_state, but it also needs to test for
the case of BPF_ALU_NON_POINTER since in both occasions we need to
skip the masking rewrite (as there is nothing to mask).
Fixes: d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths")
Reported-by: Marek Majkowski <[email protected]>
Reported-by: Arthur Fabre <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/
Acked-by: Song Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/verifier.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6428,7 +6428,8 @@ static int fixup_bpf_calls(struct bpf_ve
u32 off_reg;
aux = &env->insn_aux_data[i + delta];
- if (!aux->alu_state)
+ if (!aux->alu_state ||
+ aux->alu_state == BPF_ALU_NON_POINTER)
continue;
isneg = aux->alu_state & BPF_ALU_NEG_VALUE;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
commit 00df214b1faae520880cc5c57e206f21239ef741 upstream.
Realtek bluetooth may not work after reboot:
[ 12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008
This is a regression introduced by commit 26503ad25de8 ("Bluetooth:
btrtl: split the device initialization into smaller parts"). The new
logic errors out early when no matching IC info can be found, in this
case it means the firmware is already loaded.
So let's assume the firmware is already loaded when we can't find
matching IC info, like the old logic did.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921
Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts")
Cc: [email protected] # 4.19+
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btrtl.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -552,10 +552,9 @@ struct btrtl_device_info *btrtl_initiali
hdev->bus);
if (!btrtl_dev->ic_info) {
- rtl_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x",
+ rtl_dev_info(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x",
lmp_subver, hci_rev, hci_ver);
- ret = -EINVAL;
- goto err_free;
+ return btrtl_dev;
}
if (btrtl_dev->ic_info->has_rom_version) {
@@ -610,6 +609,11 @@ int btrtl_download_firmware(struct hci_d
* standard btusb. Once that firmware is uploaded, the subver changes
* to a different value.
*/
+ if (!btrtl_dev->ic_info) {
+ rtl_dev_info(hdev, "rtl: assuming no firmware upload needed\n");
+ return 0;
+ }
+
switch (btrtl_dev->ic_info->lmp_subver) {
case RTL_ROM_LMP_8723A:
case RTL_ROM_LMP_3499:
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Wilck <[email protected]>
commit 4a067cf823d9d8e50d41cfb618011c0d4a969c72 upstream.
Up to 4.12, __scsi_error_from_host_byte() would reset the host byte to
DID_OK for various cases including DID_NEXUS_FAILURE. Commit
2a842acab109 ("block: introduce new block status code type") replaced this
function with scsi_result_to_blk_status() and removed the host-byte
resetting code for the DID_NEXUS_FAILURE case. As the line
set_host_byte(cmd, DID_OK) was preserved for the other cases, I suppose
this was an editing mistake.
The fact that the host byte remains set after 4.13 is causing problems with
the sg_persist tool, which now returns success rather then exit status 24
when a RESERVATION CONFLICT error is encountered.
Fixes: 2a842acab109 "block: introduce new block status code type"
Signed-off-by: Martin Wilck <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_lib.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -757,6 +757,7 @@ static blk_status_t scsi_result_to_blk_s
set_host_byte(cmd, DID_OK);
return BLK_STS_TARGET;
case DID_NEXUS_FAILURE:
+ set_host_byte(cmd, DID_OK);
return BLK_STS_NEXUS;
case DID_ALLOC_FAILURE:
set_host_byte(cmd, DID_OK);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
commit f612acfae86af7ecad754ae6a46019be9da05b8e upstream.
syzkaller report this:
BUG: memory leak
unreferenced object 0xffffc9000488d000 (size 9195520):
comm "syz-executor.0", pid 2752, jiffies 4294787496 (age 18.757s)
hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff a8 00 00 00 01 00 00 00 ................
02 00 00 00 00 00 00 00 80 a1 7a c1 ff ff ff ff ..........z.....
backtrace:
[<000000000863775c>] __vmalloc_node mm/vmalloc.c:1795 [inline]
[<000000000863775c>] __vmalloc_node_flags mm/vmalloc.c:1809 [inline]
[<000000000863775c>] vmalloc+0x8c/0xb0 mm/vmalloc.c:1831
[<000000003f668111>] kernel_read_file+0x58f/0x7d0 fs/exec.c:924
[<000000002385813f>] kernel_read_file_from_fd+0x49/0x80 fs/exec.c:993
[<0000000011953ff1>] __do_sys_finit_module+0x13b/0x2a0 kernel/module.c:3895
[<000000006f58491f>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
[<00000000ee78baf4>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000241f889b>] 0xffffffffffffffff
It should goto 'out_free' lable to free allocated buf while kernel_read
fails.
Fixes: 39d637af5aa7 ("vfs: forbid write access when reading a file into memory")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Cc: Thibaut Sautereau <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/exec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -929,7 +929,7 @@ int kernel_read_file(struct file *file,
bytes = kernel_read(file, *buf + pos, i_size - pos, &pos);
if (bytes < 0) {
ret = bytes;
- goto out;
+ goto out_free;
}
if (bytes == 0)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <[email protected]>
[ Upstream commit a6da21bb0eae459a375d5bd48baed821d14301d0 ]
Despite what the datesheet says, the silicon implements the older way
of snapshoting the statistics. Change the op.
Reported-by: [email protected]
Tested-by: [email protected]
Fixes: 0ac64c394900 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3082,7 +3082,7 @@ static const struct mv88e6xxx_ops mv88e6
.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
.port_link_state = mv88e6352_port_link_state,
.port_get_cmode = mv88e6185_port_get_cmode,
- .stats_snapshot = mv88e6320_g1_stats_snapshot,
+ .stats_snapshot = mv88e6xxx_g1_stats_snapshot,
.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
.stats_get_sset_count = mv88e6095_stats_get_sset_count,
.stats_get_strings = mv88e6095_stats_get_strings,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: YueHaibing <[email protected]>
[ Upstream commit 58bdd544e2933a21a51eecf17c3f5f94038261b5 ]
KASAN report this:
BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc]
Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401
CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
kasan_report+0x171/0x18d mm/kasan/report.c:321
memcpy+0x1f/0x50 mm/kasan/common.c:130
nfc_llcp_build_gb+0x37f/0x540 [nfc]
nfc_llcp_register_device+0x6eb/0xb50 [nfc]
nfc_register_device+0x50/0x1d0 [nfc]
nfcsim_device_new+0x394/0x67d [nfcsim]
? 0xffffffffc1080000
nfcsim_init+0x6b/0x1000 [nfcsim]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
nfc_llcp_build_tlv will return NULL on fails, caller should check it,
otherwise will trigger a NULL dereference.
Reported-by: Hulk Robot <[email protected]>
Fixes: eda21f16a5ed ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_commands.c | 20 ++++++++++++++++++++
net/nfc/llcp_core.c | 24 ++++++++++++++++++++----
2 files changed, 40 insertions(+), 4 deletions(-)
--- a/net/nfc/llcp_commands.c
+++ b/net/nfc/llcp_commands.c
@@ -419,6 +419,10 @@ int nfc_llcp_send_connect(struct nfc_llc
sock->service_name,
sock->service_name_len,
&service_name_tlv_length);
+ if (!service_name_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += service_name_tlv_length;
}
@@ -429,9 +433,17 @@ int nfc_llcp_send_connect(struct nfc_llc
miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&miux, 0,
&miux_tlv_length);
+ if (!miux_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += miux_tlv_length;
rw_tlv = nfc_llcp_build_tlv(LLCP_TLV_RW, &rw, 0, &rw_tlv_length);
+ if (!rw_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += rw_tlv_length;
pr_debug("SKB size %d SN length %zu\n", size, sock->service_name_len);
@@ -484,9 +496,17 @@ int nfc_llcp_send_cc(struct nfc_llcp_soc
miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&miux, 0,
&miux_tlv_length);
+ if (!miux_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += miux_tlv_length;
rw_tlv = nfc_llcp_build_tlv(LLCP_TLV_RW, &rw, 0, &rw_tlv_length);
+ if (!rw_tlv) {
+ err = -ENOMEM;
+ goto error_tlv;
+ }
size += rw_tlv_length;
skb = llcp_allocate_pdu(sock, LLCP_PDU_CC, size);
--- a/net/nfc/llcp_core.c
+++ b/net/nfc/llcp_core.c
@@ -532,10 +532,10 @@ static u8 nfc_llcp_reserve_sdp_ssap(stru
static int nfc_llcp_build_gb(struct nfc_llcp_local *local)
{
- u8 *gb_cur, *version_tlv, version, version_length;
- u8 *lto_tlv, lto_length;
- u8 *wks_tlv, wks_length;
- u8 *miux_tlv, miux_length;
+ u8 *gb_cur, version, version_length;
+ u8 lto_length, wks_length, miux_length;
+ u8 *version_tlv = NULL, *lto_tlv = NULL,
+ *wks_tlv = NULL, *miux_tlv = NULL;
__be16 wks = cpu_to_be16(local->local_wks);
u8 gb_len = 0;
int ret = 0;
@@ -543,17 +543,33 @@ static int nfc_llcp_build_gb(struct nfc_
version = LLCP_VERSION_11;
version_tlv = nfc_llcp_build_tlv(LLCP_TLV_VERSION, &version,
1, &version_length);
+ if (!version_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += version_length;
lto_tlv = nfc_llcp_build_tlv(LLCP_TLV_LTO, &local->lto, 1, <o_length);
+ if (!lto_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += lto_length;
pr_debug("Local wks 0x%lx\n", local->local_wks);
wks_tlv = nfc_llcp_build_tlv(LLCP_TLV_WKS, (u8 *)&wks, 2, &wks_length);
+ if (!wks_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += wks_length;
miux_tlv = nfc_llcp_build_tlv(LLCP_TLV_MIUX, (u8 *)&local->miux, 0,
&miux_length);
+ if (!miux_tlv) {
+ ret = -ENOMEM;
+ goto out;
+ }
gb_len += miux_length;
gb_len += ARRAY_SIZE(llcp_magic);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Balaji Manoharan <[email protected]>
commit 8fde481ef3674ae5ad0dbfef4df18ff507c5675a upstream.
This fix enables USB role feature on intel commercial nuc
platform which is based on Kabylake chipset.
Signed-off-by: Balaji Manoharan <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -194,6 +194,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thierry Reding <[email protected]>
commit 0326ccb5feac6eac35ba6254260e2774277cd976 upstream.
During initialization, the host and super-speed power domains will
contain an ERR_PTR() encoded error code rather than being NULL. To
avoid a crash, use a !IS_ERR_OR_NULL() condition during cleanup.
Signed-off-by: Thierry Reding <[email protected]>
Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support")
Cc: stable <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Acked-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-tegra.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -941,9 +941,9 @@ static void tegra_xusb_powerdomain_remov
device_link_del(tegra->genpd_dl_ss);
if (tegra->genpd_dl_host)
device_link_del(tegra->genpd_dl_host);
- if (tegra->genpd_dev_ss)
+ if (!IS_ERR_OR_NULL(tegra->genpd_dev_ss))
dev_pm_domain_detach(tegra->genpd_dev_ss, true);
- if (tegra->genpd_dev_host)
+ if (!IS_ERR_OR_NULL(tegra->genpd_dev_host))
dev_pm_domain_detach(tegra->genpd_dev_host, true);
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Buslov <[email protected]>
[ Upstream commit a3df633a3c92bb96b06552c3f828d7c267774379 ]
Metadata pointer is only initialized for action TCA_TUNNEL_KEY_ACT_SET, but
it is unconditionally dereferenced in tunnel_key_init() error handler.
Verify that metadata pointer is not NULL before dereferencing it in
tunnel_key_init error handling code.
Fixes: ee28bb56ac5b ("net/sched: fix memory leak in act_tunnel_key_init()")
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_tunnel_key.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/sched/act_tunnel_key.c
+++ b/net/sched/act_tunnel_key.c
@@ -377,7 +377,8 @@ static int tunnel_key_init(struct net *n
return ret;
release_tun_meta:
- dst_release(&metadata->dst);
+ if (metadata)
+ dst_release(&metadata->dst);
err_out:
if (exists)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maxime Chevallier <[email protected]>
[ Upstream commit d235c48b40d399328585a68f3f9bf7cc3062d586 ]
Upon setting the cmode on 6390 and 6390X, the associated serdes
interfaces must be powered off/on.
Both 6390X and 6390 share code to do so, but it currently uses the 6390
specific helper mv88e6390_serdes_power() to disable and enable the
serdes interface.
This call will fail silently on 6390X when trying so set a 10G interface
such as XAUI or RXAUI, since mv88e6390_serdes_power() internally grabs
the lane number based on modes supported by the 6390, and returns 0 when
getting -ENODEV as a lane number.
Using mv88e6390x_serdes_power() should be safe here, since we explicitly
rule-out all ports but the 9 and 10, and because modes supported by 6390
ports 9 and 10 are a subset of those supported on 6390X.
This was tested on 6390X using RXAUI mode.
Fixes: 364e9d7776a3 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change")
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -405,7 +405,7 @@ int mv88e6390x_port_set_cmode(struct mv8
return err;
}
- err = mv88e6390_serdes_power(chip, port, false);
+ err = mv88e6390x_serdes_power(chip, port, false);
if (err)
return err;
@@ -421,7 +421,7 @@ int mv88e6390x_port_set_cmode(struct mv8
if (err)
return err;
- err = mv88e6390_serdes_power(chip, port, true);
+ err = mv88e6390x_serdes_power(chip, port, true);
if (err)
return err;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit be48220edd48ca0d569782992840488a52373a24 ]
MPLS does not support nexthops with an MPLS address family.
Specifically, it does not handle RTA_GATEWAY attribute. Make it
clear by returning an error.
Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mpls/af_mpls.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -1838,6 +1838,9 @@ static int rtm_to_route_config(struct sk
goto errout;
break;
}
+ case RTA_GATEWAY:
+ NL_SET_ERR_MSG(extack, "MPLS does not support RTA_GATEWAY attribute");
+ goto errout;
case RTA_VIA:
{
if (nla_get_via(nla, &cfg->rc_via_alen,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit b6e9e5df4ecf100f6a10ab2ade8e46d47a4b9779 ]
IPv4 currently does not support nexthops outside of the AF_INET family.
Specifically, it does not handle RTA_VIA attribute. If it is passed
in a route add request, the actual route added only uses the device
which is clearly not what the user intended:
$ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0
$ ip ro ls
...
172.16.1.0/24 dev eth0
Catch this and fail the route add:
$ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0
Error: IPv4 does not support RTA_VIA attribute.
Fixes: 03c0566542f4c ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_frontend.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -710,6 +710,10 @@ static int rtm_to_fib_config(struct net
case RTA_GATEWAY:
cfg->fc_gw = nla_get_be32(attr);
break;
+ case RTA_VIA:
+ NL_SET_ERR_MSG(extack, "IPv4 does not support RTA_VIA attribute");
+ err = -EINVAL;
+ goto errout;
case RTA_PRIORITY:
cfg->fc_priority = nla_get_u32(attr);
break;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nazarov Sergey <[email protected]>
[ Upstream commit 9ef6b42ad6fd7929dd1b6092cb02014e382c6a91 ]
Add __icmp_send function having ip_options struct parameter
Signed-off-by: Sergey Nazarov <[email protected]>
Reviewed-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/icmp.h | 9 ++++++++-
net/ipv4/icmp.c | 7 ++++---
2 files changed, 12 insertions(+), 4 deletions(-)
--- a/include/net/icmp.h
+++ b/include/net/icmp.h
@@ -22,6 +22,7 @@
#include <net/inet_sock.h>
#include <net/snmp.h>
+#include <net/ip.h>
struct icmp_err {
int errno;
@@ -39,7 +40,13 @@ struct net_proto_family;
struct sk_buff;
struct net;
-void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info);
+void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
+ const struct ip_options *opt);
+static inline void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
+{
+ __icmp_send(skb_in, type, code, info, &IPCB(skb_in)->opt);
+}
+
int icmp_rcv(struct sk_buff *skb);
void icmp_err(struct sk_buff *skb, u32 info);
int icmp_init(void);
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -570,7 +570,8 @@ relookup_failed:
* MUST reply to only the first fragment.
*/
-void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
+void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
+ const struct ip_options *opt)
{
struct iphdr *iph;
int room;
@@ -691,7 +692,7 @@ void icmp_send(struct sk_buff *skb_in, i
iph->tos;
mark = IP4_REPLY_MARK(net, skb_in->mark);
- if (ip_options_echo(net, &icmp_param.replyopts.opt.opt, skb_in))
+ if (__ip_options_echo(net, &icmp_param.replyopts.opt.opt, skb_in, opt))
goto out_unlock;
@@ -742,7 +743,7 @@ out_bh_enable:
local_bh_enable();
out:;
}
-EXPORT_SYMBOL(icmp_send);
+EXPORT_SYMBOL(__icmp_send);
static void icmp_socket_deliver(struct sk_buff *skb, u32 info)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <[email protected]>
[ Upstream commit 6e46e2d821bb22b285ae8187959096b65d063b0d ]
The switch maintains u64 counters for the number of octets sent and
received. These are kept as two u32's which need to be combined. Fix
the combing, which wrongly worked on u16's.
Fixes: 80c4627b2719 ("dsa: mv88x6xxx: Refactor getting a single statistic")
Reported-by: Chris Healy <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -896,7 +896,7 @@ static uint64_t _mv88e6xxx_get_ethtool_s
default:
return U64_MAX;
}
- value = (((u64)high) << 16) | low;
+ value = (((u64)high) << 32) | low;
return value;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haiyang Zhang <[email protected]>
[ Upstream commit bf48648d650db1146b75b9bd358502431e86cf4f ]
Incoming packets may have IP header checksum verified by the host.
They may not have IP header checksum computed after coalescing.
This patch re-compute the checksum when necessary, otherwise the
packets may be dropped, because Linux network stack always checks it.
Signed-off-by: Haiyang Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/hyperv/netvsc_drv.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -744,6 +744,14 @@ void netvsc_linkstatus_callback(struct n
schedule_delayed_work(&ndev_ctx->dwork, 0);
}
+static void netvsc_comp_ipcsum(struct sk_buff *skb)
+{
+ struct iphdr *iph = (struct iphdr *)skb->data;
+
+ iph->check = 0;
+ iph->check = ip_fast_csum(iph, iph->ihl);
+}
+
static struct sk_buff *netvsc_alloc_recv_skb(struct net_device *net,
struct netvsc_channel *nvchan)
{
@@ -770,9 +778,17 @@ static struct sk_buff *netvsc_alloc_recv
/* skb is already created with CHECKSUM_NONE */
skb_checksum_none_assert(skb);
- /*
- * In Linux, the IP checksum is always checked.
- * Do L4 checksum offload if enabled and present.
+ /* Incoming packets may have IP header checksum verified by the host.
+ * They may not have IP header checksum computed after coalescing.
+ * We compute it here if the flags are set, because on Linux, the IP
+ * checksum is always checked.
+ */
+ if (csum_info && csum_info->receive.ip_checksum_value_invalid &&
+ csum_info->receive.ip_checksum_succeeded &&
+ skb->protocol == htons(ETH_P_IP))
+ netvsc_comp_ipcsum(skb);
+
+ /* Do L4 checksum offload if enabled and present.
*/
if (csum_info && (net->features & NETIF_F_RXCSUM)) {
if (csum_info->receive.tcp_checksum_succeeded ||
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Igor Druzhinin <[email protected]>
[ Upstream commit a2288d4e355992d369c50c45d017a85f6061ff71 ]
Occasionally, during the disconnection procedure on XenBus which
includes hash cache deinitialization there might be some packets
still in-flight on other processors. Handling of these packets includes
hashing and hash cache population that finally results in hash cache
data structure corruption.
In order to avoid this we prevent hashing of those packets if there
are no queues initialized. In that case RCU protection of queues guards
the hash cache as well.
Signed-off-by: Igor Druzhinin <[email protected]>
Reviewed-by: Paul Durrant <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/hash.c | 2 ++
drivers/net/xen-netback/interface.c | 7 +++++++
2 files changed, 9 insertions(+)
--- a/drivers/net/xen-netback/hash.c
+++ b/drivers/net/xen-netback/hash.c
@@ -454,6 +454,8 @@ void xenvif_init_hash(struct xenvif *vif
if (xenvif_hash_cache_size == 0)
return;
+ BUG_ON(vif->hash.cache.count);
+
spin_lock_init(&vif->hash.cache.lock);
INIT_LIST_HEAD(&vif->hash.cache.list);
}
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -153,6 +153,13 @@ static u16 xenvif_select_queue(struct ne
{
struct xenvif *vif = netdev_priv(dev);
unsigned int size = vif->hash.size;
+ unsigned int num_queues;
+
+ /* If queues are not set up internally - always return 0
+ * as the packet going to be dropped anyway */
+ num_queues = READ_ONCE(vif->num_queues);
+ if (num_queues < 1)
+ return 0;
if (vif->hash.alg == XEN_NETIF_CTRL_HASH_ALGORITHM_NONE)
return fallback(dev, skb, NULL) % dev->real_num_tx_queues;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Kaehlcke <[email protected]>
commit c4f5627f7eeecde1bb6b646d8c0907b96dc2b2a6 upstream.
With commit e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket
atomically") lock_sock[_nested]() is used to acquire the socket lock
before manipulating the socket. lock_sock[_nested]() may block, which
is problematic since bt_accept_enqueue() can be called in bottom half
context (e.g. from rfcomm_connect_ind()):
[<ffffff80080d81ec>] __might_sleep+0x4c/0x80
[<ffffff800876c7b0>] lock_sock_nested+0x24/0x58
[<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth]
[<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm]
Add a parameter to bt_accept_enqueue() to indicate whether the
function is called from BH context, and acquire the socket lock
with bh_lock_sock_nested() if that's the case.
Also adapt all callers of bt_accept_enqueue() to pass the new
parameter:
- l2cap_sock_new_connection_cb()
- uses lock_sock() to lock the parent socket => process context
- rfcomm_connect_ind()
- acquires the parent socket lock with bh_lock_sock() => BH
context
- __sco_chan_add()
- called from sco_chan_add(), which is called from sco_connect().
parent is NULL, hence bt_accept_enqueue() isn't called in this
code path and we can ignore it
- also called from sco_conn_ready(). uses bh_lock_sock() to acquire
the parent lock => BH context
Fixes: e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically")
Signed-off-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/bluetooth/bluetooth.h | 2 +-
net/bluetooth/af_bluetooth.c | 16 +++++++++++++---
net/bluetooth/l2cap_sock.c | 2 +-
net/bluetooth/rfcomm/sock.c | 2 +-
net/bluetooth/sco.c | 2 +-
5 files changed, 17 insertions(+), 7 deletions(-)
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -276,7 +276,7 @@ int bt_sock_ioctl(struct socket *sock,
int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
int bt_sock_wait_ready(struct sock *sk, unsigned long flags);
-void bt_accept_enqueue(struct sock *parent, struct sock *sk);
+void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh);
void bt_accept_unlink(struct sock *sk);
struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -154,15 +154,25 @@ void bt_sock_unlink(struct bt_sock_list
}
EXPORT_SYMBOL(bt_sock_unlink);
-void bt_accept_enqueue(struct sock *parent, struct sock *sk)
+void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh)
{
BT_DBG("parent %p, sk %p", parent, sk);
sock_hold(sk);
- lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
+
+ if (bh)
+ bh_lock_sock_nested(sk);
+ else
+ lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
+
list_add_tail(&bt_sk(sk)->accept_q, &bt_sk(parent)->accept_q);
bt_sk(sk)->parent = parent;
- release_sock(sk);
+
+ if (bh)
+ bh_unlock_sock(sk);
+ else
+ release_sock(sk);
+
parent->sk_ack_backlog++;
}
EXPORT_SYMBOL(bt_accept_enqueue);
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1252,7 +1252,7 @@ static struct l2cap_chan *l2cap_sock_new
l2cap_sock_init(sk, parent);
- bt_accept_enqueue(parent, sk);
+ bt_accept_enqueue(parent, sk, false);
release_sock(parent);
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -988,7 +988,7 @@ int rfcomm_connect_ind(struct rfcomm_ses
rfcomm_pi(sk)->channel = channel;
sk->sk_state = BT_CONFIG;
- bt_accept_enqueue(parent, sk);
+ bt_accept_enqueue(parent, sk, true);
/* Accept connection and return socket DLC */
*d = rfcomm_pi(sk)->dlc;
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -193,7 +193,7 @@ static void __sco_chan_add(struct sco_co
conn->sk = sk;
if (parent)
- bt_accept_enqueue(parent, sk);
+ bt_accept_enqueue(parent, sk, true);
}
static int sco_chan_add(struct sco_conn *conn, struct sock *sk,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Timur Celik <[email protected]>
[ Upstream commit 71828b2240692cec0e68b8d867bc00e1745e7fae ]
This patch moves setting of the current state into the loop. Otherwise
the task may end up in a busy wait loop if none of the break conditions
are met.
Signed-off-by: Timur Celik <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2147,9 +2147,9 @@ static void *tun_ring_recv(struct tun_fi
}
add_wait_queue(&tfile->wq.wait, &wait);
- current->state = TASK_INTERRUPTIBLE;
while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
ptr = ptr_ring_consume(&tfile->tx_ring);
if (ptr)
break;
@@ -2165,7 +2165,7 @@ static void *tun_ring_recv(struct tun_fi
schedule();
}
- current->state = TASK_RUNNING;
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&tfile->wq.wait, &wait);
out:
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tung Nguyen <[email protected]>
[ Upstream commit bfd07f3dd4f111b884d7922b37eb239280f83d8c ]
When sending multicast messages via blocking socket,
if sending link is congested (tsk->cong_link_cnt is set to 1),
the sending thread will be put into sleeping state. However,
tipc_sk_filter_rcv() is called under socket spin lock but
tipc_wait_for_cond() is not. So, there is no guarantee that
the setting of tsk->cong_link_cnt to 0 in tipc_sk_proto_rcv() in
CPU-1 will be perceived by CPU-0. If that is the case, the sending
thread in CPU-0 after being waken up, will continue to see
tsk->cong_link_cnt as 1 and put the sending thread into sleeping
state again. The sending thread will sleep forever.
CPU-0 | CPU-1
tipc_wait_for_cond() |
{ |
// condition_ = !tsk->cong_link_cnt |
while ((rc_ = !(condition_))) { |
... |
release_sock(sk_); |
wait_woken(); |
| if (!sock_owned_by_user(sk))
| tipc_sk_filter_rcv()
| {
| ...
| tipc_sk_proto_rcv()
| {
| ...
| tsk->cong_link_cnt--;
| ...
| sk->sk_write_space(sk);
| ...
| }
| ...
| }
sched_annotate_sleep(); |
lock_sock(sk_); |
remove_wait_queue(); |
} |
} |
This commit fixes it by adding memory barrier to tipc_sk_proto_rcv()
and tipc_wait_for_cond().
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tung Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/socket.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -376,11 +376,13 @@ static int tipc_sk_sock_err(struct socke
#define tipc_wait_for_cond(sock_, timeo_, condition_) \
({ \
+ DEFINE_WAIT_FUNC(wait_, woken_wake_function); \
struct sock *sk_; \
int rc_; \
\
while ((rc_ = !(condition_))) { \
- DEFINE_WAIT_FUNC(wait_, woken_wake_function); \
+ /* coupled with smp_wmb() in tipc_sk_proto_rcv() */ \
+ smp_rmb(); \
sk_ = (sock_)->sk; \
rc_ = tipc_sk_sock_err((sock_), timeo_); \
if (rc_) \
@@ -1968,6 +1970,8 @@ static void tipc_sk_proto_rcv(struct soc
return;
case SOCK_WAKEUP:
tipc_dest_del(&tsk->cong_links, msg_orignode(hdr), 0);
+ /* coupled with smp_rmb() in tipc_wait_for_cond() */
+ smp_wmb();
tsk->cong_link_cnt--;
wakeup = true;
break;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bryan Whitehead <[email protected]>
[ Upstream commit 90490ef7269906423a1c1b917fc24be8b1602658 ]
It has been observed that tx queue stalls while downloading
from certain web sites (example http://www.speedtest.net)
The cause has been tracked down to a corner case where
dma descriptors where not setup properly. And there for a tx
completion interrupt was not signaled.
This fix corrects the problem by properly marking the end of
a multi descriptor transmission.
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/microchip/lan743x_main.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1400,7 +1400,8 @@ static int lan743x_tx_frame_start(struct
}
static void lan743x_tx_frame_add_lso(struct lan743x_tx *tx,
- unsigned int frame_length)
+ unsigned int frame_length,
+ int nr_frags)
{
/* called only from within lan743x_tx_xmit_frame.
* assuming tx->ring_lock has already been acquired.
@@ -1410,6 +1411,10 @@ static void lan743x_tx_frame_add_lso(str
/* wrap up previous descriptor */
tx->frame_data0 |= TX_DESC_DATA0_EXT_;
+ if (nr_frags <= 0) {
+ tx->frame_data0 |= TX_DESC_DATA0_LS_;
+ tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+ }
tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
tx_descriptor->data0 = tx->frame_data0;
@@ -1514,8 +1519,11 @@ static void lan743x_tx_frame_end(struct
u32 tx_tail_flags = 0;
/* wrap up previous descriptor */
- tx->frame_data0 |= TX_DESC_DATA0_LS_;
- tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+ if ((tx->frame_data0 & TX_DESC_DATA0_DTYPE_MASK_) ==
+ TX_DESC_DATA0_DTYPE_DATA_) {
+ tx->frame_data0 |= TX_DESC_DATA0_LS_;
+ tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+ }
tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
buffer_info = &tx->buffer_info[tx->frame_tail];
@@ -1600,7 +1608,7 @@ static netdev_tx_t lan743x_tx_xmit_frame
}
if (gso)
- lan743x_tx_frame_add_lso(tx, frame_length);
+ lan743x_tx_frame_add_lso(tx, frame_length, nr_frags);
if (nr_frags <= 0)
goto finish;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Karoly Pados <[email protected]>
commit 7b0b644b9aa2de5032db0f468fddca091d0b7b90 upstream.
Current GPIO code in cp210x fails to take USB autosuspend into account,
making it practically impossible to use GPIOs with autosuspend enabled
without user configuration. Fix this like for ftdi_sio in a previous patch.
Tested on a CP2102N.
Signed-off-by: Karoly Pados <[email protected]>
Fixes: cf5276ce7867 ("USB: serial: cp210x: Adding GPIO support for CP2105")
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1354,8 +1354,13 @@ static int cp210x_gpio_get(struct gpio_c
if (priv->partnum == CP210X_PARTNUM_CP2105)
req_type = REQTYPE_INTERFACE_TO_HOST;
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
result = cp210x_read_vendor_block(serial, req_type,
CP210X_READ_LATCH, &buf, sizeof(buf));
+ usb_autopm_put_interface(serial->interface);
if (result < 0)
return result;
@@ -1376,6 +1381,10 @@ static void cp210x_gpio_set(struct gpio_
buf.mask = BIT(gpio);
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ goto out;
+
if (priv->partnum == CP210X_PARTNUM_CP2105) {
result = cp210x_write_vendor_block(serial,
REQTYPE_HOST_TO_INTERFACE,
@@ -1393,6 +1402,8 @@ static void cp210x_gpio_set(struct gpio_
NULL, 0, USB_CTRL_SET_TIMEOUT);
}
+ usb_autopm_put_interface(serial->interface);
+out:
if (result < 0) {
dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
result);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit d25ed413d5e51644e18f66e34eec049f17a7abcb ]
When debugging an issue I found implausible values in state->pause.
Reason in that state->pause isn't initialized and later only single
bits are changed. Also the struct itself isn't initialized in
phylink_resolve(). So better initialize state->pause and other
not yet initialized fields.
v2:
- use right function name in subject
v3:
- initialize additional fields
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/phylink.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -321,6 +321,10 @@ static int phylink_get_mac_state(struct
linkmode_zero(state->lp_advertising);
state->interface = pl->link_config.interface;
state->an_enabled = pl->link_config.an_enabled;
+ state->speed = SPEED_UNKNOWN;
+ state->duplex = DUPLEX_UNKNOWN;
+ state->pause = MLO_PAUSE_NONE;
+ state->an_complete = 0;
state->link = 1;
return pl->ops->mac_link_state(ndev, state);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Benc <[email protected]>
[ Upstream commit cf1c9ccba7308e48a68fa77f476287d9d614e4c7 ]
When IPv6 is compiled but disabled at runtime, geneve_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.
Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.
This is the same fix as what commit d074bf960044 ("vxlan: correctly handle
ipv6.disable module parameter") is doing for vxlan.
Note there's also commit c0a47e44c098 ("geneve: should not call rt6_lookup()
when ipv6 was disabled") which fixes a similar issue but for regular
tunnels, while this patch is needed for metadata based tunnels.
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/geneve.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -637,15 +637,20 @@ out:
static int geneve_open(struct net_device *dev)
{
struct geneve_dev *geneve = netdev_priv(dev);
- bool ipv6 = !!(geneve->info.mode & IP_TUNNEL_INFO_IPV6);
bool metadata = geneve->collect_md;
+ bool ipv4, ipv6;
int ret = 0;
+ ipv6 = geneve->info.mode & IP_TUNNEL_INFO_IPV6 || metadata;
+ ipv4 = !ipv6 || metadata;
#if IS_ENABLED(CONFIG_IPV6)
- if (ipv6 || metadata)
+ if (ipv6) {
ret = geneve_sock_add(geneve, true);
+ if (ret < 0 && ret != -EAFNOSUPPORT)
+ ipv4 = false;
+ }
#endif
- if (!ret && (!ipv6 || metadata))
+ if (ipv4)
ret = geneve_sock_add(geneve, false);
if (ret < 0)
geneve_sock_release(geneve);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit d3d6a18d7d351cbcc9b33dbedf710e65f8ce1595 upstream.
wake_up_locked() may but does not have to be called with interrupts
disabled. Since the fuse filesystem calls wake_up_locked() without
disabling interrupts aio_poll_wake() may be called with interrupts
enabled. Since the kioctx.ctx_lock may be acquired from IRQ context,
all code that acquires that lock from thread context must disable
interrupts. Hence change the spin_trylock() call in aio_poll_wake()
into a spin_trylock_irqsave() call. This patch fixes the following
lockdep complaint:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.0.0-rc4-next-20190131 #23 Not tainted
-----------------------------------------------------
syz-executor2/13779 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000098ac1230 (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:329 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1772 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: __io_submit_one fs/aio.c:1875 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
and this task is already holding:
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908
which would create a new lock dependency:
(&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&(&ctx->ctx_lock)->rlock){..-.}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
spin_lock_irq include/linux/spinlock.h:354 [inline]
free_ioctx_users+0x2d/0x4a0 fs/aio.c:610
percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline]
percpu_ref_put include/linux/percpu-refcount.h:301 [inline]
percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline]
percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158
__rcu_reclaim kernel/rcu/rcu.h:240 [inline]
rcu_do_batch kernel/rcu/tree.c:2486 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline]
rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780
__do_softirq+0x266/0x95a kernel/softirq.c:292
run_ksoftirqd kernel/softirq.c:654 [inline]
run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
kthread+0x357/0x430 kernel/kthread.c:247
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
to a SOFTIRQ-irq-unsafe lock:
(&fiq->waitq){+.+.}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fiq->waitq);
local_irq_disable();
lock(&(&ctx->ctx_lock)->rlock);
lock(&fiq->waitq);
<Interrupt>
lock(&(&ctx->ctx_lock)->rlock);
*** DEADLOCK ***
1 lock held by syz-executor2/13779:
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline]
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline]
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline]
#0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&(&ctx->ctx_lock)->rlock){..-.} {
IN-SOFTIRQ-W at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
spin_lock_irq include/linux/spinlock.h:354 [inline]
free_ioctx_users+0x2d/0x4a0 fs/aio.c:610
percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline]
percpu_ref_put include/linux/percpu-refcount.h:301 [inline]
percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline]
percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158
__rcu_reclaim kernel/rcu/rcu.h:240 [inline]
rcu_do_batch kernel/rcu/tree.c:2486 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline]
rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780
__do_softirq+0x266/0x95a kernel/softirq.c:292
run_ksoftirqd kernel/softirq.c:654 [inline]
run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
kthread+0x357/0x430 kernel/kthread.c:247
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INITIAL USE at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
spin_lock_irq include/linux/spinlock.h:354 [inline]
__do_sys_io_cancel fs/aio.c:2052 [inline]
__se_sys_io_cancel fs/aio.c:2035 [inline]
__x64_sys_io_cancel+0xd5/0x5a0 fs/aio.c:2035
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
}
... key at: [<ffffffff8a574140>] __key.52370+0x0/0x40
... acquired at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
aio_poll fs/aio.c:1772 [inline]
__io_submit_one fs/aio.c:1875 [inline]
io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
__do_sys_io_submit fs/aio.c:1953 [inline]
__se_sys_io_submit fs/aio.c:1923 [inline]
__x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (&fiq->waitq){+.+.} {
HARDIRQ-ON-W at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
SOFTIRQ-ON-W at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
INITIAL USE at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
fuse_send_init fs/fuse/inode.c:989 [inline]
fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
mount_nodev+0x68/0x110 fs/super.c:1392
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
vfs_get_tree+0x123/0x450 fs/super.c:1481
do_new_mount fs/namespace.c:2610 [inline]
do_mount+0x1436/0x2c40 fs/namespace.c:2932
ksys_mount+0xdb/0x150 fs/namespace.c:3148
__do_sys_mount fs/namespace.c:3162 [inline]
__se_sys_mount fs/namespace.c:3159 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
}
... key at: [<ffffffff8a60dec0>] __key.43450+0x0/0x40
... acquired at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
aio_poll fs/aio.c:1772 [inline]
__io_submit_one fs/aio.c:1875 [inline]
io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
__do_sys_io_submit fs/aio.c:1953 [inline]
__se_sys_io_submit fs/aio.c:1923 [inline]
__x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
stack backtrace:
CPU: 0 PID: 13779 Comm: syz-executor2 Not tainted 5.0.0-rc4-next-20190131 #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_bad_irq_dependency kernel/locking/lockdep.c:1573 [inline]
check_usage.cold+0x60f/0x940 kernel/locking/lockdep.c:1605
check_irq_usage kernel/locking/lockdep.c:1650 [inline]
check_prev_add_irq kernel/locking/lockdep_states.h:8 [inline]
check_prev_add kernel/locking/lockdep.c:1860 [inline]
check_prevs_add kernel/locking/lockdep.c:1968 [inline]
validate_chain kernel/locking/lockdep.c:2339 [inline]
__lock_acquire+0x1f12/0x4790 kernel/locking/lockdep.c:3320
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
aio_poll fs/aio.c:1772 [inline]
__io_submit_one fs/aio.c:1875 [inline]
io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
__do_sys_io_submit fs/aio.c:1953 [inline]
__se_sys_io_submit fs/aio.c:1923 [inline]
__x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: syzbot <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: <[email protected]>
Fixes: e8693bcfa0b4 ("aio: allow direct aio poll comletions for keyed wakeups") # v4.19
Signed-off-by: Miklos Szeredi <[email protected]>
[ bvanassche: added a comment ]
Reluctantly-Acked-by: Christoph Hellwig <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/aio.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1661,6 +1661,7 @@ static int aio_poll_wake(struct wait_que
struct poll_iocb *req = container_of(wait, struct poll_iocb, wait);
struct aio_kiocb *iocb = container_of(req, struct aio_kiocb, poll);
__poll_t mask = key_to_poll(key);
+ unsigned long flags;
req->woken = true;
@@ -1669,10 +1670,15 @@ static int aio_poll_wake(struct wait_que
if (!(mask & req->events))
return 0;
- /* try to complete the iocb inline if we can: */
- if (spin_trylock(&iocb->ki_ctx->ctx_lock)) {
+ /*
+ * Try to complete the iocb inline if we can. Use
+ * irqsave/irqrestore because not all filesystems (e.g. fuse)
+ * call this function with IRQs disabled and because IRQs
+ * have to be disabled before ctx_lock is obtained.
+ */
+ if (spin_trylock_irqsave(&iocb->ki_ctx->ctx_lock, flags)) {
list_del(&iocb->ki_list);
- spin_unlock(&iocb->ki_ctx->ctx_lock);
+ spin_unlock_irqrestore(&iocb->ki_ctx->ctx_lock, flags);
list_del_init(&req->wait.entry);
aio_poll_complete(iocb, mask);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mans Rullgard <[email protected]>
commit 8d7fa3d4ea3f0ca69554215e87411494e6346fdc upstream.
This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick.
Signed-off-by: Mans Rullgard <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 2 ++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 8 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1025,6 +1025,8 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
+ /* EZPrototypes devices */
+ { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1309,6 +1309,12 @@
#define IONICS_PLUGCOMPUTER_PID 0x0102
/*
+ * EZPrototypes (PID reseller)
+ */
+#define EZPROTOTYPES_VID 0x1c40
+#define HJELMSLUND_USB485_ISO_PID 0x0477
+
+/*
* Dresden Elektronik Sensor Terminal Board
*/
#define DE_VID 0x1cf1 /* Vendor ID */
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tikhomirov <[email protected]>
commit 6a072128d262d2b98d31626906a96700d1fc11eb upstream.
Then tracing syscall exit event it is extremely useful to filter exit
codes equal to some negative value, to react only to required errors.
But negative numbers does not work:
[root@snorch sys_exit_read]# echo "ret == -1" > filter
bash: echo: write error: Invalid argument
[root@snorch sys_exit_read]# cat filter
ret == -1
^
parse_error: Invalid value (did you forget quotes)?
Similar thing happens when setting triggers.
These is a regression in v4.17 introduced by the commit mentioned below,
testing without these commit shows no problem with negative numbers.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 80765597bc58 ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Pavel Tikhomirov <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events_filter.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -1301,7 +1301,7 @@ static int parse_pred(const char *str, v
/* go past the last quote */
i++;
- } else if (isdigit(str[i])) {
+ } else if (isdigit(str[i]) || str[i] == '-') {
/* Make sure the field is not a string */
if (is_string_field(field)) {
@@ -1314,6 +1314,9 @@ static int parse_pred(const char *str, v
goto err_free;
}
+ if (str[i] == '-')
+ i++;
+
/* We allow 0xDEADBEEF */
while (isalnum(str[i]))
i++;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
commit 376991db4b6464e906d699ef07681e2ffa8ab08c upstream.
When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS
(R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for
device pass-through for virtualization:
echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind
the kernel crashes with:
Unable to handle kernel paging request at virtual address ffffffbf029ffffc
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c
[ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
Modules linked in:
CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287
Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
pstate: 60400005 (nZCv daif +PAN -UAO)
pc : __free_pages+0x8/0x58
lr : __dma_direct_free_pages+0x50/0x5c
sp : ffffff801268baa0
x29: ffffff801268baa0 x28: 0000000000000000
x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0
x25: ffffffc6f9c60810 x24: 0000000000000000
x23: 00000000fffff000 x22: ffffff8012145000
x21: 0000000000000800 x20: ffffffbf029fffc8
x19: 0000000000000000 x18: ffffffc6f86c42c8
x17: 0000000000000000 x16: 0000000000000070
x15: 0000000000000003 x14: 0000000000000000
x13: ffffff801103d7f8 x12: 0000000000000028
x11: ffffff8011117604 x10: 0000000000009ad8
x9 : ffffff80110126d0 x8 : ffffffc6f7563000
x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018
x5 : ffffff8011cf3cc8 x4 : 0000000000004000
x3 : 0000000000080000 x2 : 0000000000000001
x1 : 0000000000000000 x0 : ffffffbf029fffc8
Process bash (pid: 1098, stack limit = 0x00000000c38e3e32)
Call trace:
__free_pages+0x8/0x58
__dma_direct_free_pages+0x50/0x5c
arch_dma_free+0x1c/0x98
dma_direct_free+0x14/0x24
dma_free_attrs+0x9c/0xdc
dmam_release+0x18/0x20
release_nodes+0x25c/0x28c
devres_release_all+0x48/0x4c
device_release_driver_internal+0x184/0x1f0
device_release_driver+0x14/0x1c
unbind_store+0x70/0xb8
drv_attr_store+0x24/0x34
sysfs_kf_write+0x4c/0x64
kernfs_fop_write+0x154/0x1c4
__vfs_write+0x34/0x164
vfs_write+0xb4/0x16c
ksys_write+0x5c/0xbc
__arm64_sys_write+0x14/0x1c
el0_svc_common+0x98/0x114
el0_svc_handler+0x1c/0x24
el0_svc+0x8/0xc
Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404)
---[ end trace 8c564cdd3a1a840f ]---
While I've bisected this to commit e8e683ae9a736407 ("iommu/of: Fix
probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels
does fix the problem, this turned out to be a red herring.
On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL.
Hence if a driver has used a managed DMA allocation API, the allocated
DMA memory will be freed using the direct DMA ops, while it may have
been allocated using a custom DMA ops (iommu_dma_ops in this case).
Fix this by reversing the order of the calls to devres_release_all() and
arch_teardown_dma_ops().
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Christoph Hellwig <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/dd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -965,9 +965,9 @@ static void __device_release_driver(stru
drv->remove(dev);
device_links_driver_cleanup(dev);
- arch_teardown_dma_ops(dev);
devres_release_all(dev);
+ arch_teardown_dma_ops(dev);
dev->driver = NULL;
dev_set_drvdata(dev, NULL);
if (dev->pm_domain && dev->pm_domain->dismiss)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
[ Upstream commit 5e1a99eae84999a2536f50a0beaf5d5262337f40 ]
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers.
But for ip -6 route, currently we only support tcp, udp and icmp.
Add ICMPv6 support so we can match ipv6-icmp rules for route lookup.
v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to
rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family.
Reported-by: Jianlin Shi <[email protected]>
Fixes: eacb9384a3fe ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/ip.h | 2 +-
net/ipv4/netlink.c | 17 +++++++++++++----
net/ipv4/route.c | 2 +-
net/ipv6/route.c | 3 ++-
4 files changed, 17 insertions(+), 7 deletions(-)
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -714,7 +714,7 @@ extern int sysctl_icmp_msgs_burst;
int ip_misc_proc_init(void);
#endif
-int rtm_getroute_parse_ip_proto(struct nlattr *attr, u8 *ip_proto,
+int rtm_getroute_parse_ip_proto(struct nlattr *attr, u8 *ip_proto, u8 family,
struct netlink_ext_ack *extack);
#endif /* _IP_H */
--- a/net/ipv4/netlink.c
+++ b/net/ipv4/netlink.c
@@ -3,9 +3,10 @@
#include <linux/types.h>
#include <net/net_namespace.h>
#include <net/netlink.h>
+#include <linux/in6.h>
#include <net/ip.h>
-int rtm_getroute_parse_ip_proto(struct nlattr *attr, u8 *ip_proto,
+int rtm_getroute_parse_ip_proto(struct nlattr *attr, u8 *ip_proto, u8 family,
struct netlink_ext_ack *extack)
{
*ip_proto = nla_get_u8(attr);
@@ -13,11 +14,19 @@ int rtm_getroute_parse_ip_proto(struct n
switch (*ip_proto) {
case IPPROTO_TCP:
case IPPROTO_UDP:
+ return 0;
case IPPROTO_ICMP:
+ if (family != AF_INET)
+ break;
+ return 0;
+#if IS_ENABLED(CONFIG_IPV6)
+ case IPPROTO_ICMPV6:
+ if (family != AF_INET6)
+ break;
return 0;
- default:
- NL_SET_ERR_MSG(extack, "Unsupported ip proto");
- return -EOPNOTSUPP;
+#endif
}
+ NL_SET_ERR_MSG(extack, "Unsupported ip proto");
+ return -EOPNOTSUPP;
}
EXPORT_SYMBOL_GPL(rtm_getroute_parse_ip_proto);
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2803,7 +2803,7 @@ static int inet_rtm_getroute(struct sk_b
if (tb[RTA_IP_PROTO]) {
err = rtm_getroute_parse_ip_proto(tb[RTA_IP_PROTO],
- &ip_proto, extack);
+ &ip_proto, AF_INET, extack);
if (err)
return err;
}
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4880,7 +4880,8 @@ static int inet6_rtm_getroute(struct sk_
if (tb[RTA_IP_PROTO]) {
err = rtm_getroute_parse_ip_proto(tb[RTA_IP_PROTO],
- &fl6.flowi6_proto, extack);
+ &fl6.flowi6_proto, AF_INET6,
+ extack);
if (err)
goto errout;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 46b1c18f9deb326a7e18348e668e4c7ab7c7458b ]
In the series fc8b81a5981f ("Merge branch 'lockless-qdisc-series'")
John made the assumption that the data path had no need to read
the qdisc qlen (number of packets in the qdisc).
It is true when pfifo_fast is used as the root qdisc, or as direct MQ/MQPRIO
children.
But pfifo_fast can be used as leaf in class full qdiscs, and existing
logic needs to access the child qlen in an efficient way.
HTB breaks badly, since it uses cl->leaf.q->q.qlen in :
htb_activate() -> WARN_ON()
htb_dequeue_tree() to decide if a class can be htb_deactivated
when it has no more packets.
HFSC, DRR, CBQ, QFQ have similar issues, and some calls to
qdisc_tree_reduce_backlog() also read q.qlen directly.
Using qdisc_qlen_sum() (which iterates over all possible cpus)
in the data path is a non starter.
It seems we have to put back qlen in a central location,
at least for stable kernels.
For all qdisc but pfifo_fast, qlen is guarded by the qdisc lock,
so the existing q.qlen{++|--} are correct.
For 'lockless' qdisc (pfifo_fast so far), we need to use atomic_{inc|dec}()
because the spinlock might be not held (for example from
pfifo_fast_enqueue() and pfifo_fast_dequeue())
This patch adds atomic_qlen (in the same location than qlen)
and renames the following helpers, since we want to express
they can be used without qdisc lock, and that qlen is no longer percpu.
- qdisc_qstats_cpu_qlen_dec -> qdisc_qstats_atomic_qlen_dec()
- qdisc_qstats_cpu_qlen_inc -> qdisc_qstats_atomic_qlen_inc()
Later (net-next) we might revert this patch by tracking all these
qlen uses and replace them by a more efficient method (not having
to access a precise qlen, but an empty/non_empty status that might
be less expensive to maintain/track).
Another possibility is to have a legacy pfifo_fast version that would
be used when used a a child qdisc, since the parent qdisc needs
a spinlock anyway. But then, future lockless qdiscs would also
have the same problem.
Fixes: 7e66016f2c65 ("net: sched: helpers to sum qlen and qlen for per cpu logic")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: Jamal Hadi Salim <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sch_generic.h | 31 +++++++++++++------------------
net/core/gen_stats.c | 2 --
net/sched/sch_generic.c | 13 ++++++-------
3 files changed, 19 insertions(+), 27 deletions(-)
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -48,7 +48,10 @@ struct qdisc_size_table {
struct qdisc_skb_head {
struct sk_buff *head;
struct sk_buff *tail;
- __u32 qlen;
+ union {
+ u32 qlen;
+ atomic_t atomic_qlen;
+ };
spinlock_t lock;
};
@@ -405,27 +408,19 @@ static inline void qdisc_cb_private_vali
BUILD_BUG_ON(sizeof(qcb->data) < sz);
}
-static inline int qdisc_qlen_cpu(const struct Qdisc *q)
-{
- return this_cpu_ptr(q->cpu_qstats)->qlen;
-}
-
static inline int qdisc_qlen(const struct Qdisc *q)
{
return q->q.qlen;
}
-static inline int qdisc_qlen_sum(const struct Qdisc *q)
+static inline u32 qdisc_qlen_sum(const struct Qdisc *q)
{
- __u32 qlen = q->qstats.qlen;
- int i;
+ u32 qlen = q->qstats.qlen;
- if (q->flags & TCQ_F_NOLOCK) {
- for_each_possible_cpu(i)
- qlen += per_cpu_ptr(q->cpu_qstats, i)->qlen;
- } else {
+ if (q->flags & TCQ_F_NOLOCK)
+ qlen += atomic_read(&q->q.atomic_qlen);
+ else
qlen += q->q.qlen;
- }
return qlen;
}
@@ -798,14 +793,14 @@ static inline void qdisc_qstats_cpu_back
this_cpu_add(sch->cpu_qstats->backlog, qdisc_pkt_len(skb));
}
-static inline void qdisc_qstats_cpu_qlen_inc(struct Qdisc *sch)
+static inline void qdisc_qstats_atomic_qlen_inc(struct Qdisc *sch)
{
- this_cpu_inc(sch->cpu_qstats->qlen);
+ atomic_inc(&sch->q.atomic_qlen);
}
-static inline void qdisc_qstats_cpu_qlen_dec(struct Qdisc *sch)
+static inline void qdisc_qstats_atomic_qlen_dec(struct Qdisc *sch)
{
- this_cpu_dec(sch->cpu_qstats->qlen);
+ atomic_dec(&sch->q.atomic_qlen);
}
static inline void qdisc_qstats_cpu_requeues_inc(struct Qdisc *sch)
--- a/net/core/gen_stats.c
+++ b/net/core/gen_stats.c
@@ -291,7 +291,6 @@ __gnet_stats_copy_queue_cpu(struct gnet_
for_each_possible_cpu(i) {
const struct gnet_stats_queue *qcpu = per_cpu_ptr(q, i);
- qstats->qlen = 0;
qstats->backlog += qcpu->backlog;
qstats->drops += qcpu->drops;
qstats->requeues += qcpu->requeues;
@@ -307,7 +306,6 @@ void __gnet_stats_copy_queue(struct gnet
if (cpu) {
__gnet_stats_copy_queue_cpu(qstats, cpu);
} else {
- qstats->qlen = q->qlen;
qstats->backlog = q->backlog;
qstats->drops = q->drops;
qstats->requeues = q->requeues;
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -68,7 +68,7 @@ static inline struct sk_buff *__skb_dequ
skb = __skb_dequeue(&q->skb_bad_txq);
if (qdisc_is_percpu_stats(q)) {
qdisc_qstats_cpu_backlog_dec(q, skb);
- qdisc_qstats_cpu_qlen_dec(q);
+ qdisc_qstats_atomic_qlen_dec(q);
} else {
qdisc_qstats_backlog_dec(q, skb);
q->q.qlen--;
@@ -108,7 +108,7 @@ static inline void qdisc_enqueue_skb_bad
if (qdisc_is_percpu_stats(q)) {
qdisc_qstats_cpu_backlog_inc(q, skb);
- qdisc_qstats_cpu_qlen_inc(q);
+ qdisc_qstats_atomic_qlen_inc(q);
} else {
qdisc_qstats_backlog_inc(q, skb);
q->q.qlen++;
@@ -147,7 +147,7 @@ static inline int dev_requeue_skb_locked
qdisc_qstats_cpu_requeues_inc(q);
qdisc_qstats_cpu_backlog_inc(q, skb);
- qdisc_qstats_cpu_qlen_inc(q);
+ qdisc_qstats_atomic_qlen_inc(q);
skb = next;
}
@@ -252,7 +252,7 @@ static struct sk_buff *dequeue_skb(struc
skb = __skb_dequeue(&q->gso_skb);
if (qdisc_is_percpu_stats(q)) {
qdisc_qstats_cpu_backlog_dec(q, skb);
- qdisc_qstats_cpu_qlen_dec(q);
+ qdisc_qstats_atomic_qlen_dec(q);
} else {
qdisc_qstats_backlog_dec(q, skb);
q->q.qlen--;
@@ -645,7 +645,7 @@ static int pfifo_fast_enqueue(struct sk_
if (unlikely(err))
return qdisc_drop_cpu(skb, qdisc, to_free);
- qdisc_qstats_cpu_qlen_inc(qdisc);
+ qdisc_qstats_atomic_qlen_inc(qdisc);
/* Note: skb can not be used after skb_array_produce(),
* so we better not use qdisc_qstats_cpu_backlog_inc()
*/
@@ -670,7 +670,7 @@ static struct sk_buff *pfifo_fast_dequeu
if (likely(skb)) {
qdisc_qstats_cpu_backlog_dec(qdisc, skb);
qdisc_bstats_cpu_update(qdisc, skb);
- qdisc_qstats_cpu_qlen_dec(qdisc);
+ qdisc_qstats_atomic_qlen_dec(qdisc);
}
return skb;
@@ -714,7 +714,6 @@ static void pfifo_fast_reset(struct Qdis
struct gnet_stats_queue *q = per_cpu_ptr(qdisc->cpu_qstats, i);
q->backlog = 0;
- q->qlen = 0;
}
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit 95150f29ae480276e76368cdf8a9524b5a96c0ca ]
Ports 9 and 10 don't have internal PHY's but are (dependent on the
version) SERDES/SGMII/XAUI/RXAUI ports.
v2:
- fix it for all 88E6x90 family members
Fixes: bc3931557d1d ("net: dsa: mv88e6xxx: Add number of internal PHYs")
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -4206,7 +4206,7 @@ static const struct mv88e6xxx_info mv88e
.name = "Marvell 88E6190",
.num_databases = 4096,
.num_ports = 11, /* 10 + Z80 */
- .num_internal_phys = 11,
+ .num_internal_phys = 9,
.num_gpio = 16,
.max_vid = 8191,
.port_base_addr = 0x0,
@@ -4229,7 +4229,7 @@ static const struct mv88e6xxx_info mv88e
.name = "Marvell 88E6190X",
.num_databases = 4096,
.num_ports = 11, /* 10 + Z80 */
- .num_internal_phys = 11,
+ .num_internal_phys = 9,
.num_gpio = 16,
.max_vid = 8191,
.port_base_addr = 0x0,
@@ -4252,7 +4252,7 @@ static const struct mv88e6xxx_info mv88e
.name = "Marvell 88E6191",
.num_databases = 4096,
.num_ports = 11, /* 10 + Z80 */
- .num_internal_phys = 11,
+ .num_internal_phys = 9,
.max_vid = 8191,
.port_base_addr = 0x0,
.phy_base_addr = 0x0,
@@ -4299,7 +4299,7 @@ static const struct mv88e6xxx_info mv88e
.name = "Marvell 88E6290",
.num_databases = 4096,
.num_ports = 11, /* 10 + Z80 */
- .num_internal_phys = 11,
+ .num_internal_phys = 9,
.num_gpio = 16,
.max_vid = 8191,
.port_base_addr = 0x0,
@@ -4461,7 +4461,7 @@ static const struct mv88e6xxx_info mv88e
.name = "Marvell 88E6390",
.num_databases = 4096,
.num_ports = 11, /* 10 + Z80 */
- .num_internal_phys = 11,
+ .num_internal_phys = 9,
.num_gpio = 16,
.max_vid = 8191,
.port_base_addr = 0x0,
@@ -4484,7 +4484,7 @@ static const struct mv88e6xxx_info mv88e
.name = "Marvell 88E6390X",
.num_databases = 4096,
.num_ports = 11, /* 10 + Z80 */
- .num_internal_phys = 11,
+ .num_internal_phys = 9,
.num_gpio = 16,
.max_vid = 8191,
.port_base_addr = 0x0,
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit c6195a8bdfc62a7cecf7df685e64847a4b700275 ]
When testing another issue I faced the problem that
mv88e6xxx_port_setup_mac() failed due to DUPLEX_UNKNOWN being passed
as argument to mv88e6xxx_port_set_duplex(). We should handle this case
gracefully and return -EOPNOTSUPP, like e.g. mv88e6xxx_port_set_speed()
is doing it.
Fixes: 7f1ae07b51e8 ("net: dsa: mv88e6xxx: add port duplex setter")
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/port.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -190,7 +190,7 @@ int mv88e6xxx_port_set_duplex(struct mv8
/* normal duplex detection */
break;
default:
- return -EINVAL;
+ return -EOPNOTSUPP;
}
err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_MAC_CTL, reg);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
commit a112152f6f3a2a88caa6f414d540bd49e406af60 upstream.
EROFS has an optimized path called TAIL merging, which is designed
to merge multiple reads and the corresponding decompressions into
one if these requests read continuous pages almost at the same time.
In general, it behaves as follows:
________________________________________________________________
... | TAIL . HEAD | PAGE | PAGE | TAIL . HEAD | ...
_____|_combined page A_|________|________|_combined page B_|____
1 ] -> [ 2 ] -> [ 3
If the above three reads are requested in the order 1-2-3, it will
generate a large work chain rather than 3 individual work chains
to reduce scheduling overhead and boost up sequential read.
However, if Read 2 is processed slightly earlier than Read 1,
currently it still generates 2 individual work chains (chain 1, 2)
but it does in-place decompression for combined page A, moreover,
if chain 2 decompresses ahead of chain 1, it will be a race and
lead to corrupted decompressed page. This patch fixes it.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <[email protected]> # 4.19+
Signed-off-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/unzip_vle.c | 70 ++++++++++++++++++++++++--------------
1 file changed, 45 insertions(+), 25 deletions(-)
--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -59,15 +59,30 @@ enum z_erofs_vle_work_role {
Z_EROFS_VLE_WORK_SECONDARY,
Z_EROFS_VLE_WORK_PRIMARY,
/*
- * The current work has at least been linked with the following
- * processed chained works, which means if the processing page
- * is the tail partial page of the work, the current work can
- * safely use the whole page, as illustrated below:
- * +--------------+-------------------------------------------+
- * | tail page | head page (of the previous work) |
- * +--------------+-------------------------------------------+
- * /\ which belongs to the current work
- * [ (*) this page can be used for the current work itself. ]
+ * The current work was the tail of an exist chain, and the previous
+ * processed chained works are all decided to be hooked up to it.
+ * A new chain should be created for the remaining unprocessed works,
+ * therefore different from Z_EROFS_VLE_WORK_PRIMARY_FOLLOWED,
+ * the next work cannot reuse the whole page in the following scenario:
+ * ________________________________________________________________
+ * | tail (partial) page | head (partial) page |
+ * | (belongs to the next work) | (belongs to the current work) |
+ * |_______PRIMARY_FOLLOWED_______|________PRIMARY_HOOKED___________|
+ */
+ Z_EROFS_VLE_WORK_PRIMARY_HOOKED,
+ /*
+ * The current work has been linked with the processed chained works,
+ * and could be also linked with the potential remaining works, which
+ * means if the processing page is the tail partial page of the work,
+ * the current work can safely use the whole page (since the next work
+ * is under control) for in-place decompression, as illustrated below:
+ * ________________________________________________________________
+ * | tail (partial) page | head (partial) page |
+ * | (of the current work) | (of the previous work) |
+ * | PRIMARY_FOLLOWED or | |
+ * |_____PRIMARY_HOOKED____|____________PRIMARY_FOLLOWED____________|
+ *
+ * [ (*) the above page can be used for the current work itself. ]
*/
Z_EROFS_VLE_WORK_PRIMARY_FOLLOWED,
Z_EROFS_VLE_WORK_MAX
@@ -236,10 +251,10 @@ static int z_erofs_vle_work_add_page(
return ret ? 0 : -EAGAIN;
}
-static inline bool try_to_claim_workgroup(
- struct z_erofs_vle_workgroup *grp,
- z_erofs_vle_owned_workgrp_t *owned_head,
- bool *hosted)
+static enum z_erofs_vle_work_role
+try_to_claim_workgroup(struct z_erofs_vle_workgroup *grp,
+ z_erofs_vle_owned_workgrp_t *owned_head,
+ bool *hosted)
{
DBG_BUGON(*hosted == true);
@@ -253,6 +268,9 @@ retry:
*owned_head = grp;
*hosted = true;
+ /* lucky, I am the followee :) */
+ return Z_EROFS_VLE_WORK_PRIMARY_FOLLOWED;
+
} else if (grp->next == Z_EROFS_VLE_WORKGRP_TAIL) {
/*
* type 2, link to the end of a existing open chain,
@@ -262,12 +280,11 @@ retry:
if (Z_EROFS_VLE_WORKGRP_TAIL != cmpxchg(&grp->next,
Z_EROFS_VLE_WORKGRP_TAIL, *owned_head))
goto retry;
-
*owned_head = Z_EROFS_VLE_WORKGRP_TAIL;
- } else
- return false; /* :( better luck next time */
+ return Z_EROFS_VLE_WORK_PRIMARY_HOOKED;
+ }
- return true; /* lucky, I am the followee :) */
+ return Z_EROFS_VLE_WORK_PRIMARY; /* :( better luck next time */
}
struct z_erofs_vle_work_finder {
@@ -345,12 +362,9 @@ z_erofs_vle_work_lookup(const struct z_e
*f->hosted = false;
if (!primary)
*f->role = Z_EROFS_VLE_WORK_SECONDARY;
- /* claim the workgroup if possible */
- else if (try_to_claim_workgroup(grp, f->owned_head, f->hosted))
- *f->role = Z_EROFS_VLE_WORK_PRIMARY_FOLLOWED;
- else
- *f->role = Z_EROFS_VLE_WORK_PRIMARY;
-
+ else /* claim the workgroup if possible */
+ *f->role = try_to_claim_workgroup(grp, f->owned_head,
+ f->hosted);
return work;
}
@@ -410,6 +424,9 @@ z_erofs_vle_work_register(const struct z
return work;
}
+#define builder_is_hooked(builder) \
+ ((builder)->role >= Z_EROFS_VLE_WORK_PRIMARY_HOOKED)
+
#define builder_is_followed(builder) \
((builder)->role >= Z_EROFS_VLE_WORK_PRIMARY_FOLLOWED)
@@ -584,7 +601,7 @@ static int z_erofs_do_read_page(struct z
struct z_erofs_vle_work_builder *const builder = &fe->builder;
const loff_t offset = page_offset(page);
- bool tight = builder_is_followed(builder);
+ bool tight = builder_is_hooked(builder);
struct z_erofs_vle_work *work = builder->work;
#ifdef EROFS_FS_HAS_MANAGED_CACHE
@@ -649,7 +666,7 @@ repeat:
builder->role = Z_EROFS_VLE_WORK_PRIMARY;
#endif
- tight &= builder_is_followed(builder);
+ tight &= builder_is_hooked(builder);
work = builder->work;
hitted:
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
@@ -664,6 +681,9 @@ hitted:
(tight ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED));
+ if (cur)
+ tight &= builder_is_followed(builder);
+
retry:
err = z_erofs_vle_work_add_page(builder, page, page_type);
/* should allocate an additional staging page for pagevec */
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit 3acca1dd17060332cfab15693733cdaf9fba1c90 ]
In the original patch I missed to add mv88e6xxx_ports_cmode_init()
to the second probe function, the one for the new DSA framework.
Fixes: ed8fe20205ac ("net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode")
Reported-by: Shaokun Zhang <[email protected]>
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -4821,6 +4821,7 @@ static int mv88e6xxx_probe(struct mdio_d
if (err)
goto out;
+ mv88e6xxx_ports_cmode_init(chip);
mv88e6xxx_phy_init(chip);
if (chip->info->ops->get_eeprom) {
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qing Xia <[email protected]>
commit 9bcf065e28122588a6cbee08cf847826dacbb438 upstream.
In the first loop, gfp_flags will be modified to high_order_gfp_flags,
and there will be no chance to change back to low_order_gfp_flags.
Fixes: e7f63771b60e ("ION: Sys_heap: Add cached pool to spead up cached buffer alloc")
Signed-off-by: Qing Xia <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Jing Xia <[email protected]>
Reviewed-by: Yuming Han <[email protected]>
Reviewed-by: Zhaoyang Huang <[email protected]>
Reviewed-by: Orson Zhai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/android/ion/ion_system_heap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/android/ion/ion_system_heap.c
+++ b/drivers/staging/android/ion/ion_system_heap.c
@@ -224,10 +224,10 @@ static void ion_system_heap_destroy_pool
static int ion_system_heap_create_pools(struct ion_page_pool **pools)
{
int i;
- gfp_t gfp_flags = low_order_gfp_flags;
for (i = 0; i < NUM_ORDERS; i++) {
struct ion_page_pool *pool;
+ gfp_t gfp_flags = low_order_gfp_flags;
if (orders[i] > 4)
gfp_flags = high_order_gfp_flags;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 479826cc86118e0d87e5cefb3df5b748e0480924 upstream.
Add missing break statement in order to prevent the code from falling
through to the default case and return -EINVAL every time.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: aa94f2888825 ("staging: comedi: ni_660x: tidy up ni_660x_set_pfi_routing()")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/ni_660x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -656,6 +656,7 @@ static int ni_660x_set_pfi_routing(struc
case NI_660X_PFI_OUTPUT_DIO:
if (chan > 31)
return -EINVAL;
+ break;
default:
return -EINVAL;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 625c85a62cb7d3c79f6e16de3cfa972033658250 upstream.
The cpufreq_global_kobject is created using kobject_create_and_add()
helper, which assigns the kobj_type as dynamic_kobj_ktype and show/store
routines are set to kobj_attr_show() and kobj_attr_store().
These routines pass struct kobj_attribute as an argument to the
show/store callbacks. But all the cpufreq files created using the
cpufreq_global_kobject expect the argument to be of type struct
attribute. Things work fine currently as no one accesses the "attr"
argument. We may not see issues even if the argument is used, as struct
kobj_attribute has struct attribute as its first element and so they
will both get same address.
But this is logically incorrect and we should rather use struct
kobj_attribute instead of struct global_attr in the cpufreq core and
drivers and the show/store callbacks should take struct kobj_attribute
as argument instead.
This bug is caught using CFI CLANG builds in android kernel which
catches mismatch in function prototypes for such callbacks.
Reported-by: Donghee Han <[email protected]>
Reported-by: Sangkyu Kim <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/cpufreq.c | 6 +++---
drivers/cpufreq/intel_pstate.c | 23 ++++++++++++-----------
include/linux/cpufreq.h | 12 ++----------
3 files changed, 17 insertions(+), 24 deletions(-)
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -545,13 +545,13 @@ EXPORT_SYMBOL_GPL(cpufreq_policy_transit
* SYSFS INTERFACE *
*********************************************************************/
static ssize_t show_boost(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled);
}
-static ssize_t store_boost(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
+static ssize_t store_boost(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t count)
{
int ret, enable;
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -873,7 +873,7 @@ static void intel_pstate_update_policies
/************************** sysfs begin ************************/
#define show_one(file_name, object) \
static ssize_t show_##file_name \
- (struct kobject *kobj, struct attribute *attr, char *buf) \
+ (struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
{ \
return sprintf(buf, "%u\n", global.object); \
}
@@ -882,7 +882,7 @@ static ssize_t intel_pstate_show_status(
static int intel_pstate_update_status(const char *buf, size_t size);
static ssize_t show_status(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
ssize_t ret;
@@ -893,7 +893,7 @@ static ssize_t show_status(struct kobjec
return ret;
}
-static ssize_t store_status(struct kobject *a, struct attribute *b,
+static ssize_t store_status(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
char *p = memchr(buf, '\n', count);
@@ -907,7 +907,7 @@ static ssize_t store_status(struct kobje
}
static ssize_t show_turbo_pct(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
struct cpudata *cpu;
int total, no_turbo, turbo_pct;
@@ -933,7 +933,7 @@ static ssize_t show_turbo_pct(struct kob
}
static ssize_t show_num_pstates(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
struct cpudata *cpu;
int total;
@@ -954,7 +954,7 @@ static ssize_t show_num_pstates(struct k
}
static ssize_t show_no_turbo(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
ssize_t ret;
@@ -976,7 +976,7 @@ static ssize_t show_no_turbo(struct kobj
return ret;
}
-static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
+static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
@@ -1023,7 +1023,7 @@ static ssize_t store_no_turbo(struct kob
return count;
}
-static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
+static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
@@ -1053,7 +1053,7 @@ static ssize_t store_max_perf_pct(struct
return count;
}
-static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
+static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
@@ -1085,12 +1085,13 @@ static ssize_t store_min_perf_pct(struct
}
static ssize_t show_hwp_dynamic_boost(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", hwp_boost);
}
-static ssize_t store_hwp_dynamic_boost(struct kobject *a, struct attribute *b,
+static ssize_t store_hwp_dynamic_boost(struct kobject *a,
+ struct kobj_attribute *b,
const char *buf, size_t count)
{
unsigned int input;
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -254,20 +254,12 @@ __ATTR(_name, 0644, show_##_name, store_
static struct freq_attr _name = \
__ATTR(_name, 0200, NULL, store_##_name)
-struct global_attr {
- struct attribute attr;
- ssize_t (*show)(struct kobject *kobj,
- struct attribute *attr, char *buf);
- ssize_t (*store)(struct kobject *a, struct attribute *b,
- const char *c, size_t count);
-};
-
#define define_one_global_ro(_name) \
-static struct global_attr _name = \
+static struct kobj_attribute _name = \
__ATTR(_name, 0444, show_##_name, NULL)
#define define_one_global_rw(_name) \
-static struct global_attr _name = \
+static struct kobj_attribute _name = \
__ATTR(_name, 0644, show_##_name, store_##_name)
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tetsuo Handa <[email protected]>
commit ecd182cbf4e107928077866399100228d2359c60 upstream.
ashmem_pin() is calling range_shrink() without checking whether
range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex
held should be avoided because ashmem_shrink_scan() tries to hold it.
Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin()
and make range_alloc() not to fail.
This patch is mostly meant for backporting purpose for fuzz testing on
stable/distributor kernels, for there is a plan to remove this code in
near future.
Signed-off-by: Tetsuo Handa <[email protected]>
Cc: [email protected]
Reviewed-by: Joel Fernandes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/android/ashmem.c | 42 ++++++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 18 deletions(-)
--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -171,19 +171,15 @@ static inline void lru_del(struct ashmem
* @end: The ending page (inclusive)
*
* This function is protected by ashmem_mutex.
- *
- * Return: 0 if successful, or -ENOMEM if there is an error
*/
-static int range_alloc(struct ashmem_area *asma,
- struct ashmem_range *prev_range, unsigned int purged,
- size_t start, size_t end)
+static void range_alloc(struct ashmem_area *asma,
+ struct ashmem_range *prev_range, unsigned int purged,
+ size_t start, size_t end,
+ struct ashmem_range **new_range)
{
- struct ashmem_range *range;
-
- range = kmem_cache_zalloc(ashmem_range_cachep, GFP_KERNEL);
- if (!range)
- return -ENOMEM;
+ struct ashmem_range *range = *new_range;
+ *new_range = NULL;
range->asma = asma;
range->pgstart = start;
range->pgend = end;
@@ -193,8 +189,6 @@ static int range_alloc(struct ashmem_are
if (range_on_lru(range))
lru_add(range);
-
- return 0;
}
/**
@@ -596,7 +590,8 @@ static int get_name(struct ashmem_area *
*
* Caller must hold ashmem_mutex.
*/
-static int ashmem_pin(struct ashmem_area *asma, size_t pgstart, size_t pgend)
+static int ashmem_pin(struct ashmem_area *asma, size_t pgstart, size_t pgend,
+ struct ashmem_range **new_range)
{
struct ashmem_range *range, *next;
int ret = ASHMEM_NOT_PURGED;
@@ -649,7 +644,7 @@ static int ashmem_pin(struct ashmem_area
* second half and adjust the first chunk's endpoint.
*/
range_alloc(asma, range, range->purged,
- pgend + 1, range->pgend);
+ pgend + 1, range->pgend, new_range);
range_shrink(range, range->pgstart, pgstart - 1);
break;
}
@@ -663,7 +658,8 @@ static int ashmem_pin(struct ashmem_area
*
* Caller must hold ashmem_mutex.
*/
-static int ashmem_unpin(struct ashmem_area *asma, size_t pgstart, size_t pgend)
+static int ashmem_unpin(struct ashmem_area *asma, size_t pgstart, size_t pgend,
+ struct ashmem_range **new_range)
{
struct ashmem_range *range, *next;
unsigned int purged = ASHMEM_NOT_PURGED;
@@ -689,7 +685,8 @@ restart:
}
}
- return range_alloc(asma, range, purged, pgstart, pgend);
+ range_alloc(asma, range, purged, pgstart, pgend, new_range);
+ return 0;
}
/*
@@ -722,10 +719,17 @@ static int ashmem_pin_unpin(struct ashme
struct ashmem_pin pin;
size_t pgstart, pgend;
int ret = -EINVAL;
+ struct ashmem_range *range = NULL;
if (copy_from_user(&pin, p, sizeof(pin)))
return -EFAULT;
+ if (cmd == ASHMEM_PIN || cmd == ASHMEM_UNPIN) {
+ range = kmem_cache_zalloc(ashmem_range_cachep, GFP_KERNEL);
+ if (!range)
+ return -ENOMEM;
+ }
+
mutex_lock(&ashmem_mutex);
wait_event(ashmem_shrink_wait, !atomic_read(&ashmem_shrink_inflight));
@@ -750,10 +754,10 @@ static int ashmem_pin_unpin(struct ashme
switch (cmd) {
case ASHMEM_PIN:
- ret = ashmem_pin(asma, pgstart, pgend);
+ ret = ashmem_pin(asma, pgstart, pgend, &range);
break;
case ASHMEM_UNPIN:
- ret = ashmem_unpin(asma, pgstart, pgend);
+ ret = ashmem_unpin(asma, pgstart, pgend, &range);
break;
case ASHMEM_GET_PIN_STATUS:
ret = ashmem_get_pin_status(asma, pgstart, pgend);
@@ -762,6 +766,8 @@ static int ashmem_pin_unpin(struct ashme
out_unlock:
mutex_unlock(&ashmem_mutex);
+ if (range)
+ kmem_cache_free(ashmem_range_cachep, range);
return ret;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sheng Yong <[email protected]>
commit 3b1b5291f79d040d549d7c746669fc30e8045b9b upstream.
If it fails to read a shared xattr page, the inode's shared xattr array
is not freed. The next time the inode's xattr is accessed, the previously
allocated array is leaked.
Signed-off-by: Sheng Yong <[email protected]>
Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <[email protected]> # 4.19+
Reviewed-by: Gao Xiang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/xattr.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/staging/erofs/xattr.c
+++ b/drivers/staging/erofs/xattr.c
@@ -111,8 +111,11 @@ static int init_inode_xattrs(struct inod
it.page = erofs_get_meta_page(sb,
++it.blkaddr, S_ISDIR(inode->i_mode));
- if (IS_ERR(it.page))
+ if (IS_ERR(it.page)) {
+ kfree(vi->xattr_shared_xattrs);
+ vi->xattr_shared_xattrs = NULL;
return PTR_ERR(it.page);
+ }
it.kaddr = kmap_atomic(it.page);
atomic_map = true;
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit 692c31bd4054212312396b1d303bffab2c5b93a7 ]
When team is used in loadbalance mode a BPF filter can be used to
provide a hash which will determine the Tx port.
When the netdev is later unregistered the filter is not freed which
results in memory leaks [1].
Fix by freeing the program and the corresponding filter when
unregistering the netdev.
[1]
unreferenced object 0xffff8881dbc47cc8 (size 16):
comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s)
hex dump (first 16 bytes):
a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........
backtrace:
[<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
[<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
[<00000000610ef838>] genl_rcv_msg+0xca/0x170
[<00000000a281df93>] netlink_rcv_skb+0x132/0x380
[<000000004d9448a2>] genl_rcv+0x29/0x40
[<000000000321b2f4>] netlink_unicast+0x4c0/0x690
[<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
[<00000000068298c5>] sock_sendmsg+0xc8/0x110
[<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
[<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
[<0000000027c5f11a>] do_syscall_64+0x14d/0x610
[<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e23197e2>] 0xffffffffffffffff
unreferenced object 0xffff8881e182a588 (size 2048):
comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s)
hex dump (first 32 bytes):
20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(...
07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(.......
backtrace:
[<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0
[<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
[<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
[<00000000610ef838>] genl_rcv_msg+0xca/0x170
[<00000000a281df93>] netlink_rcv_skb+0x132/0x380
[<000000004d9448a2>] genl_rcv+0x29/0x40
[<000000000321b2f4>] netlink_unicast+0x4c0/0x690
[<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
[<00000000068298c5>] sock_sendmsg+0xc8/0x110
[<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
[<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
[<0000000027c5f11a>] do_syscall_64+0x14d/0x610
[<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e23197e2>] 0xffffffffffffffff
Fixes: 01d7f30a9f96 ("team: add loadbalance mode")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Amit Cohen <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/team/team_mode_loadbalance.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/net/team/team_mode_loadbalance.c
+++ b/drivers/net/team/team_mode_loadbalance.c
@@ -325,6 +325,20 @@ static int lb_bpf_func_set(struct team *
return 0;
}
+static void lb_bpf_func_free(struct team *team)
+{
+ struct lb_priv *lb_priv = get_lb_priv(team);
+ struct bpf_prog *fp;
+
+ if (!lb_priv->ex->orig_fprog)
+ return;
+
+ __fprog_destroy(lb_priv->ex->orig_fprog);
+ fp = rcu_dereference_protected(lb_priv->fp,
+ lockdep_is_held(&team->lock));
+ bpf_prog_destroy(fp);
+}
+
static int lb_tx_method_get(struct team *team, struct team_gsetter_ctx *ctx)
{
struct lb_priv *lb_priv = get_lb_priv(team);
@@ -639,6 +653,7 @@ static void lb_exit(struct team *team)
team_options_unregister(team, lb_options,
ARRAY_SIZE(lb_options));
+ lb_bpf_func_free(team);
cancel_delayed_work_sync(&lb_priv->ex->stats.refresh_dw);
free_percpu(lb_priv->pcpu_stats);
kfree(lb_priv->ex);
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 901efe12318b1ea8d3e2c88a7b75ed6e6d5d7245 ]
The user msg is also copied to the abort packet when doing SCTP_ABORT in
sctp_sendmsg_check_sflags(). When SCTP_SENDALL is set, iov_iter_revert()
should have been called for sending abort on the next asoc with copying
this msg. Otherwise, memcpy_from_msg() in sctp_make_abort_user() will
fail and return error.
Fixes: 4910280503f3 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg")
Reported-by: Ying Xu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/socket.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1866,6 +1866,7 @@ static int sctp_sendmsg_check_sflags(str
pr_debug("%s: aborting association:%p\n", __func__, asoc);
sctp_primitive_ABORT(net, asoc, chunk);
+ iov_iter_revert(&msg->msg_iter, msg_len);
return 0;
}
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
commit 62dc45979f3f8cb0ea67302a93bff686f0c46c5a upstream.
In real scenario, there could be several threads accessing xattrs
of the same xattr-uninitialized inode, and init_inode_xattrs()
almost at the same time.
That's actually an unexpected behavior, this patch closes the race.
Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <[email protected]> # 4.19+
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/erofs/internal.h | 11 +++++++---
drivers/staging/erofs/xattr.c | 41 +++++++++++++++++++++++++++------------
2 files changed, 37 insertions(+), 15 deletions(-)
--- a/drivers/staging/erofs/internal.h
+++ b/drivers/staging/erofs/internal.h
@@ -352,12 +352,17 @@ static inline erofs_off_t iloc(struct er
return blknr_to_addr(sbi->meta_blkaddr) + (nid << sbi->islotbits);
}
-#define inode_set_inited_xattr(inode) (EROFS_V(inode)->flags |= 1)
-#define inode_has_inited_xattr(inode) (EROFS_V(inode)->flags & 1)
+/* atomic flag definitions */
+#define EROFS_V_EA_INITED_BIT 0
+
+/* bitlock definitions (arranged in reverse order) */
+#define EROFS_V_BL_XATTR_BIT (BITS_PER_LONG - 1)
struct erofs_vnode {
erofs_nid_t nid;
- unsigned int flags;
+
+ /* atomic flags (including bitlocks) */
+ unsigned long flags;
unsigned char data_mapping_mode;
/* inline size in bytes */
--- a/drivers/staging/erofs/xattr.c
+++ b/drivers/staging/erofs/xattr.c
@@ -44,18 +44,25 @@ static inline void xattr_iter_end_final(
static int init_inode_xattrs(struct inode *inode)
{
+ struct erofs_vnode *const vi = EROFS_V(inode);
struct xattr_iter it;
unsigned int i;
struct erofs_xattr_ibody_header *ih;
struct super_block *sb;
struct erofs_sb_info *sbi;
- struct erofs_vnode *vi;
bool atomic_map;
+ int ret = 0;
- if (likely(inode_has_inited_xattr(inode)))
+ /* the most case is that xattrs of this inode are initialized. */
+ if (test_bit(EROFS_V_EA_INITED_BIT, &vi->flags))
return 0;
- vi = EROFS_V(inode);
+ if (wait_on_bit_lock(&vi->flags, EROFS_V_BL_XATTR_BIT, TASK_KILLABLE))
+ return -ERESTARTSYS;
+
+ /* someone has initialized xattrs for us? */
+ if (test_bit(EROFS_V_EA_INITED_BIT, &vi->flags))
+ goto out_unlock;
/*
* bypass all xattr operations if ->xattr_isize is not greater than
@@ -68,13 +75,16 @@ static int init_inode_xattrs(struct inod
if (vi->xattr_isize == sizeof(struct erofs_xattr_ibody_header)) {
errln("xattr_isize %d of nid %llu is not supported yet",
vi->xattr_isize, vi->nid);
- return -ENOTSUPP;
+ ret = -ENOTSUPP;
+ goto out_unlock;
} else if (vi->xattr_isize < sizeof(struct erofs_xattr_ibody_header)) {
if (unlikely(vi->xattr_isize)) {
DBG_BUGON(1);
- return -EIO; /* xattr ondisk layout error */
+ ret = -EIO;
+ goto out_unlock; /* xattr ondisk layout error */
}
- return -ENOATTR;
+ ret = -ENOATTR;
+ goto out_unlock;
}
sb = inode->i_sb;
@@ -83,8 +93,10 @@ static int init_inode_xattrs(struct inod
it.ofs = erofs_blkoff(iloc(sbi, vi->nid) + vi->inode_isize);
it.page = erofs_get_inline_page(inode, it.blkaddr);
- if (IS_ERR(it.page))
- return PTR_ERR(it.page);
+ if (IS_ERR(it.page)) {
+ ret = PTR_ERR(it.page);
+ goto out_unlock;
+ }
/* read in shared xattr array (non-atomic, see kmalloc below) */
it.kaddr = kmap(it.page);
@@ -97,7 +109,8 @@ static int init_inode_xattrs(struct inod
sizeof(uint), GFP_KERNEL);
if (vi->xattr_shared_xattrs == NULL) {
xattr_iter_end(&it, atomic_map);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_unlock;
}
/* let's skip ibody header */
@@ -114,7 +127,8 @@ static int init_inode_xattrs(struct inod
if (IS_ERR(it.page)) {
kfree(vi->xattr_shared_xattrs);
vi->xattr_shared_xattrs = NULL;
- return PTR_ERR(it.page);
+ ret = PTR_ERR(it.page);
+ goto out_unlock;
}
it.kaddr = kmap_atomic(it.page);
@@ -127,8 +141,11 @@ static int init_inode_xattrs(struct inod
}
xattr_iter_end(&it, atomic_map);
- inode_set_inited_xattr(inode);
- return 0;
+ set_bit(EROFS_V_EA_INITED_BIT, &vi->flags);
+
+out_unlock:
+ clear_and_wake_up_bit(EROFS_V_BL_XATTR_BIT, &vi->flags);
+ return ret;
}
/*
On 08/03/2019 12:49, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.20.15 release.
> There are 76 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 10 12:48:49 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.15-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v4.20:
11 builds: 11 pass, 0 fail
22 boots: 22 pass, 0 fail
28 tests: 28 pass, 0 fail
Linux version: 4.20.15-rc1-gb80b02d1
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 3/8/19 5:49 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.20.15 release.
> There are 76 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 10 12:48:49 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.15-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Fri, 8 Mar 2019 at 18:25, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.20.15 release.
> There are 76 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 10 12:48:49 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.15-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.20.15-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.20.y
git commit: b80b02d1b1651606ab4c202888512583ffcc6bf3
git describe: v4.20.13-166-gb80b02d1b165
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.20-oe/build/v4.20.13-166-gb80b02d1b165
No regressions (compared to build v4.20.13)
No fixes (compared to build v4.20.13)
Ran 20015 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-fs-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
--
Linaro LKFT
https://lkft.linaro.org
On 3/8/19 4:49 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.20.15 release.
> There are 76 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 10 12:48:49 UTC 2019.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 343 pass: 343 fail: 0
Guenter