This is the start of the stable review cycle for the 4.14.108 release.
There are 183 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Mar 24 11:11:06 UTC 2019.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.108-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.108-rc1
Martin Schwidefsky <[email protected]>
s390/setup: fix boot crash for machine without EDAT-1
Sean Christopherson <[email protected]>
KVM: nVMX: Ignore limit checks on VMX instructions using flat segments
Sean Christopherson <[email protected]>
KVM: nVMX: Apply addr size mask to effective address for VMX instructions
Sean Christopherson <[email protected]>
KVM: nVMX: Sign extend displacements of VMX instr's mem operands
Sean Christopherson <[email protected]>
KVM: x86/mmu: Do not cache MMIO accesses while memslots are in flux
Sean Christopherson <[email protected]>
KVM: x86/mmu: Detect MMIO generation wrap in any address space
Sean Christopherson <[email protected]>
KVM: Call kvm_arch_memslots_updated() before updating memslots
Gustavo A. R. Silva <[email protected]>
drm/radeon/evergreen_cs: fix missing break in switch statement
Steve Longerbeam <[email protected]>
media: imx: csi: Stop upstream before disabling IDMA channel
Steve Longerbeam <[email protected]>
media: imx: csi: Disable CSI immediately after last EOF
Lucas A. M. Magalhães <[email protected]>
media: vimc: Add vimc-streamer for stream control
Sakari Ailus <[email protected]>
media: uvcvideo: Avoid NULL pointer dereference at the end of streaming
Steve Longerbeam <[email protected]>
media: imx: prpencvf: Stop upstream before disabling IDMA channel
Zhang, Jun <[email protected]>
rcu: Do RCU GP kthread self-wakeup from softirq and interrupt
Jarkko Sakkinen <[email protected]>
tpm: Unify the send callback behaviour
Jarkko Sakkinen <[email protected]>
tpm/tpm_crb: Avoid unaligned reads in crb_recv()
Aditya Pakki <[email protected]>
md: Fix failed allocation of md_register_thread
Adrian Hunter <[email protected]>
perf intel-pt: Fix divide by zero when TSC is not available
Adrian Hunter <[email protected]>
perf intel-pt: Fix overlap calculation for padding
Adrian Hunter <[email protected]>
perf auxtrace: Define auxtrace record alignment
Adrian Hunter <[email protected]>
perf intel-pt: Fix CYC timestamp calculation after OVF
Josh Poimboeuf <[email protected]>
x86/unwind/orc: Fix ORC unwind table alignment
Daniel Axtens <[email protected]>
bcache: never writeback a discard operation
Viresh Kumar <[email protected]>
PM / wakeup: Rework wakeup source timer cancellation
Trond Myklebust <[email protected]>
NFSv4.1: Reinitialise sequence results before retransmitting a request
Yihao Wu <[email protected]>
nfsd: fix wrong check in write_v4_end_grace()
NeilBrown <[email protected]>
nfsd: fix memory corruption caused by readdir
Trond Myklebust <[email protected]>
NFS: Don't recoalesce on error in nfs_pageio_complete_mirror()
Trond Myklebust <[email protected]>
NFS: Fix an I/O request leakage in nfs_do_recoalesce
Trond Myklebust <[email protected]>
NFS: Fix I/O request leakages
Pavel Machek <[email protected]>
cpcap-charger: generate events for userspace
Mikulas Patocka <[email protected]>
dm integrity: limit the rate of error messages
NeilBrown <[email protected]>
dm: fix to_sector() for 32bit
Dave Martin <[email protected]>
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
Will Deacon <[email protected]>
arm64: debug: Ensure debug handlers check triggering exception level
Julien Thierry <[email protected]>
arm64: Fix HCR.TGE status for NMI contexts
Gustavo A. R. Silva <[email protected]>
ARM: s3c24xx: Fix boolean expressions in osiris_dvs_notify
Christophe Leroy <[email protected]>
powerpc/traps: Fix the message printed when stack overflows
Christophe Leroy <[email protected]>
powerpc/traps: fix recoverability of machine check handling on book3s/32
Aneesh Kumar K.V <[email protected]>
powerpc/hugetlb: Don't do runtime allocation of 16G pages in LPAR configuration
Michael Ellerman <[email protected]>
powerpc/ptrace: Simplify vr_get/set() to avoid GCC warning
Mark Cave-Ayland <[email protected]>
powerpc: Fix 32-bit KVM-PR lockup and host crash with MacOS guest
Christophe Leroy <[email protected]>
powerpc/83xx: Also save/restore SPRG4-7 during suspend
Jordan Niethe <[email protected]>
powerpc/powernv: Make opal log only readable by root
Christophe Leroy <[email protected]>
powerpc/wii: properly disable use of BATs when requested.
Christophe Leroy <[email protected]>
powerpc/32: Clear on-stack exception marker upon exception return
J. Bruce Fields <[email protected]>
security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock
zhangyi (F) <[email protected]>
jbd2: fix compile warning when using JBUFFER_TRACE
zhangyi (F) <[email protected]>
jbd2: clear dirty flag when revoking a buffer from an older transaction
Jay Dolan <[email protected]>
serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()
Jay Dolan <[email protected]>
serial: 8250_pci: Fix number of ports for ACCES serial cards
Lubomir Rintel <[email protected]>
serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart
Anssi Hannula <[email protected]>
serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
Tvrtko Ursulin <[email protected]>
drm/i915: Relax mmap VMA check
Eric Biggers <[email protected]>
crypto: arm64/aes-neonbs - fix returning final keystream block
Sowjanya Komatineni <[email protected]>
i2c: tegra: fix maximum transfer size
QiaoChong <[email protected]>
parport_pc: fix find_superio io compare code, should use equal test.
Alexander Shishkin <[email protected]>
intel_th: Don't reference unassigned outputs
Heikki Krogerus <[email protected]>
device property: Fix the length used in PROPERTY_ENTRY_STRING()
Zev Weiss <[email protected]>
kernel/sysctl.c: add missing range check in do_proc_dointvec_minmax_conv
Roman Penyaev <[email protected]>
mm/vmalloc: fix size check for remap_vmalloc_range_partial()
zhongjiang <[email protected]>
mm: hwpoison: fix thp split handing in soft_offline_in_use_page()
Dexuan Cui <[email protected]>
nfit: acpi_nfit_ctl(): Check out_obj->type in the right place
Dmitry Osipenko <[email protected]>
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
Paul Cercueil <[email protected]>
clk: ingenic: Fix doc of ingenic_cgu_div_info
Paul Cercueil <[email protected]>
clk: ingenic: Fix round_rate misbehaving with non-integer dividers
Tony Lindgren <[email protected]>
clk: clk-twl6040: Fix imprecise external abort for pdmclk
Kunihiko Hayashi <[email protected]>
clk: uniphier: Fix update register for CPU-gear
Jan Kara <[email protected]>
ext2: Fix underflow in ext2_max_size()
Vaibhav Jain <[email protected]>
cxl: Wrap iterations over afu slices inside 'afu_list_lock'
Michael J. Ruhl <[email protected]>
IB/hfi1: Close race condition on user context disable and close
Jan Kara <[email protected]>
ext4: fix crash during online resizing
yangerkun <[email protected]>
ext4: add mask of ext4 flags to swap
Arnd Bergmann <[email protected]>
cpufreq: pxa2xx: remove incorrect __init annotation
Yangtao Li <[email protected]>
cpufreq: tegra124: add missing of_node_put()
Masami Hiramatsu <[email protected]>
x86/kprobes: Prohibit probing on optprobe template code
Zenghui Yu <[email protected]>
irqchip/gic-v3-its: Avoid parsing _indirect_ twice for Device table
Lubomir Rintel <[email protected]>
libertas_tf: don't set URB_ZERO_PACKET on IN USB transfer
Eric Biggers <[email protected]>
crypto: pcbc - remove bogus memcpy()s with src == dest
Filipe Manana <[email protected]>
Btrfs: fix corruption reading shared and compressed extents after hole punching
Johannes Thumshirn <[email protected]>
btrfs: ensure that a DUP or RAID1 block group has exactly two stripes
Filipe Manana <[email protected]>
Btrfs: setup a nofs context for memory allocation at __btrfs_set_acl
Finn Thain <[email protected]>
m68k: Add -ffreestanding to CFLAGS
Jann Horn <[email protected]>
splice: don't merge into linked buffers
Varad Gautam <[email protected]>
fs/devpts: always delete dcache dentry-s in dput()
Bart Van Assche <[email protected]>
scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlock
Martin K. Petersen <[email protected]>
scsi: sd: Optimal I/O size should be a multiple of physical block size
Sagar Biradar <[email protected]>
scsi: aacraid: Fix performance issue on logical drives
Felipe Franciosi <[email protected]>
scsi: virtio_scsi: don't send sc payload with tmfs
Halil Pasic <[email protected]>
s390/virtio: handle find on invalid queue gracefully
Martin Schwidefsky <[email protected]>
s390/setup: fix early warning messages
Stuart Menefy <[email protected]>
clocksource/drivers/exynos_mct: Clear timer interrupt when shutdown
Stuart Menefy <[email protected]>
clocksource/drivers/exynos_mct: Move one-shot check from tick clear to ISR
Stuart Menefy <[email protected]>
regulator: s2mpa01: Fix step values for some LDOs
Mark Zhang <[email protected]>
regulator: max77620: Initialize values for DT properties
Krzysztof Kozlowski <[email protected]>
regulator: s2mps11: Fix steps for buck7, buck8 and LDO35
Andy Shevchenko <[email protected]>
spi: pxa2xx: Setup maximum supported DMA transfer length
Vignesh R <[email protected]>
spi: ti-qspi: Fix mmap read when more than one CS in use
BOUGH CHEN <[email protected]>
mmc: sdhci-esdhc-imx: fix HS400 timing issue
Andy Shevchenko <[email protected]>
ACPI / device_sysfs: Avoid OF modalias creation for removed device
Juergen Gross <[email protected]>
xen: fix dom0 boot on huge systems
zhangyi (F) <[email protected]>
tracing: Do not free iter->trace in fail path of tracing_open_pipe()
Tom Zanussi <[email protected]>
tracing: Use strncpy instead of memcpy for string keys in hist triggers
Pavel Shilovsky <[email protected]>
CIFS: Fix read after write for files with read caching
Pavel Shilovsky <[email protected]>
CIFS: Do not reset lease state to NONE on lease break
Ard Biesheuvel <[email protected]>
crypto: arm64/aes-ccm - fix bugs in non-NEON fallback routine
Ard Biesheuvel <[email protected]>
crypto: arm64/aes-ccm - fix logical bug in AAD MAC handling
Eric Biggers <[email protected]>
crypto: testmgr - skip crc32c context test for ahash algorithms
Eric Biggers <[email protected]>
crypto: hash - set CRYPTO_TFM_NEED_KEY if ->setkey() fails
Ard Biesheuvel <[email protected]>
crypto: arm64/crct10dif - revert to C code for short inputs
Ard Biesheuvel <[email protected]>
crypto: arm/crct10dif - revert to C code for short inputs
Al Viro <[email protected]>
fix cgroup_do_mount() handling of failure exits
Oliver O'Halloran <[email protected]>
libnvdimm: Fix altmap reservation size calculation
Dan Williams <[email protected]>
libnvdimm/pmem: Honor force_raw for legacy pmem regions
Wei Yang <[email protected]>
libnvdimm, pfn: Fix over-trim in trim_pfn_device()
Dan Williams <[email protected]>
libnvdimm/label: Clear 'updating' flag after label-set update
Alexander Shishkin <[email protected]>
stm class: Prevent division by zero
Hans Verkuil <[email protected]>
media: videobuf2-v4l2: drop WARN_ON in vb2_warn_zero_bytesused()
Darrick J. Wong <[email protected]>
tmpfs: fix uninitialized return value in shmem_link
Mao Wenan <[email protected]>
net: set static variable an initial value in atl2_probe()
Jiong Wang <[email protected]>
nfp: bpf: fix ALU32 high bits clearance bug
Jiong Wang <[email protected]>
nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K
Vadim Lomovtsev <[email protected]>
net: thunderx: make CFG_DONE message to run through generic send-ack sequence
Li RongQing <[email protected]>
mac80211_hwsim: propagate genlmsg_reply return code
Arnd Bergmann <[email protected]>
phonet: fix building with clang
Vineet Gupta <[email protected]>
ARCv2: support manual regfile save on interrupts
Vineet Gupta <[email protected]>
ARC: uacces: remove lp_start, lp_end from clobber list
Eugeniy Paltsev <[email protected]>
ARCv2: lib: memcpy: fix doing prefetchw outside of buffer
Jeff Kirsher <[email protected]>
ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWEN
Darrick J. Wong <[email protected]>
tmpfs: fix link accounting when a tmpfile is linked in
Russell King <[email protected]>
net: marvell: mvneta: fix DMA debug warning
Vladimir Murzin <[email protected]>
arm64: Relax GIC version check during early boot
Michal Kalderon <[email protected]>
qed: Fix iWARP syn packet mac address validation.
Bard liao <[email protected]>
ASoC: topology: free created components in tplg load error
Rayagonda Kokatanur <[email protected]>
mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue
Alexey Khoroshilov <[email protected]>
net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
Beniamino Galvani <[email protected]>
qmi_wwan: apply SET_DTR quirk to Sierra WP7607
Martin Blumenstingl <[email protected]>
pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins
Florian Fainelli <[email protected]>
net: systemport: Fix reception of BPDUs
Anoob Soman <[email protected]>
scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
David Howells <[email protected]>
keys: Fix dependency loop between construction record and auth key
David Howells <[email protected]>
assoc_array: Fix shortcut creation
Sean Tranchetti <[email protected]>
af_key: unconditionally clone on broadcast
Dietmar Eggemann <[email protected]>
ARM: 8824/1: fix a migrating irq bug when hotplug cpu
Martin Willi <[email protected]>
esp: Skip TX bytes accounting when sending from a request socket
Andre Przywara <[email protected]>
clk: sunxi: A31: Fix wrong AHB gate number
Paul Kocialkowski <[email protected]>
clk: sunxi-ng: v3s: Fix TCON reset de-assert bit
Gabriel Fernandez <[email protected]>
Input: st-keyscan - fix potential zalloc NULL dereference
Miguel Ojeda <[email protected]>
auxdisplay: ht16k33: fix potential user-after-free on module unload
Paul Kocialkowski <[email protected]>
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
Shubhrajyoti Datta <[email protected]>
i2c: cadence: Fix the hold bit setting
Huang Zijiang <[email protected]>
net: hns: Fix object reference leaks in hns_dsaf_roce_reset()
Jann Horn <[email protected]>
mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs
Qian Cai <[email protected]>
Revert "mm: use early_pfn_to_nid in page_ext_init"
Yu Zhao <[email protected]>
mm/gup: fix gup_pmd_range() for dax
Benjamin Coddington <[email protected]>
NFS: Don't use page_file_mapping after removing the page
Yufen Yu <[email protected]>
floppy: check_events callback should not return a negative number
Andrea Claudi <[email protected]>
ipvs: fix dependency on nf_defrag_ipv6
Ilan Peer <[email protected]>
mac80211: Fix Tx aggregation session tear down with ITXQs
Dmitry Torokhov <[email protected]>
Input: matrix_keypad - use flush_delayed_work()
Dmitry Torokhov <[email protected]>
Input: ps2-gpio - flush TX work when closing port
Dmitry Torokhov <[email protected]>
Input: cap11xx - switch to using set_brightness_blocking()
Russell King <[email protected]>
ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
Christoffer Dall <[email protected]>
KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
Kuninori Morimoto <[email protected]>
ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check
Pierre-Louis Bossart <[email protected]>
ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables
Yizhuo <[email protected]>
ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
Paweł Chmiel <[email protected]>
Input: pwm-vibra - stop regulator after disabling pwm, not before
Jonathan Bakker <[email protected]>
Input: pwm-vibra - prevent unbalanced regulator
Stefan Haberland <[email protected]>
s390/dasd: fix using offset into zero size array error
Steve Longerbeam <[email protected]>
gpu: ipu-v3: Fix CSI offsets for imx53
Julia Lawall <[email protected]>
drm/imx: imx-ldb: add missing of_node_puts
Alexander Shiyan <[email protected]>
gpu: ipu-v3: Fix i.MX51 CSI control registers offset
Philipp Zabel <[email protected]>
drm/imx: ignore plane updates on disabled crtcs
Zhang Zhijie <[email protected]>
crypto: rockchip - update new iv to device in multiple operations
Zhang Zhijie <[email protected]>
crypto: rockchip - fix scatterlist nents error
Eric Biggers <[email protected]>
crypto: ahash - fix another early termination in hash walk
Pankaj Gupta <[email protected]>
crypto: caam - fixed handling of sg list
Zhi Jin <[email protected]>
stm class: Fix an endless loop in channel allocation
Krzysztof Kozlowski <[email protected]>
iio: adc: exynos-adc: Fix NULL pointer exception on unbind
S.j. Wang <[email protected]>
ASoC: fsl_esai: fix register setting issue in RIGHT_J mode
zhengbin <[email protected]>
9p/net: fix memory leak in p9_client_create
Hou Tao <[email protected]>
9p: use inode->i_lock to protect i_size_write() under 32-bit
-------------
Diffstat:
Makefile | 4 +-
arch/arc/Kconfig | 8 +
arch/arc/include/asm/entry-arcv2.h | 54 ++++++
arch/arc/include/asm/uaccess.h | 8 +-
arch/arc/kernel/entry-arcv2.S | 4 +-
arch/arc/kernel/intc-arcv2.c | 2 +
arch/arc/lib/memcpy-archs.S | 14 --
arch/arc/plat-hsdk/Kconfig | 1 +
arch/arm/Kconfig | 1 +
arch/arm/crypto/crct10dif-ce-core.S | 14 +-
arch/arm/crypto/crct10dif-ce-glue.c | 23 +--
arch/arm/include/asm/irq.h | 1 -
arch/arm/kernel/irq.c | 62 -------
arch/arm/kernel/smp.c | 2 +-
arch/arm/mach-omap2/cpuidle44xx.c | 16 +-
arch/arm/mach-omap2/display.c | 7 +-
arch/arm/mach-s3c24xx/mach-osiris-dvs.c | 8 +-
arch/arm64/crypto/aes-ce-ccm-core.S | 5 +-
arch/arm64/crypto/aes-ce-ccm-glue.c | 4 +-
arch/arm64/crypto/aes-neonbs-core.S | 5 +-
arch/arm64/crypto/crct10dif-ce-glue.c | 25 +--
arch/arm64/include/asm/hardirq.h | 31 ++++
arch/arm64/kernel/head.S | 3 +-
arch/arm64/kernel/irq.c | 3 +
arch/arm64/kernel/kgdb.c | 14 +-
arch/arm64/kernel/probes/kprobes.c | 6 +
arch/arm64/kvm/reset.c | 26 ++-
arch/arm64/kvm/sys_regs.c | 2 +-
arch/m68k/Makefile | 5 +-
arch/mips/include/asm/kvm_host.h | 2 +-
arch/powerpc/include/asm/book3s/64/hugetlb.h | 8 +
arch/powerpc/include/asm/kvm_host.h | 2 +-
arch/powerpc/kernel/entry_32.S | 9 +
arch/powerpc/kernel/process.c | 2 +-
arch/powerpc/kernel/ptrace.c | 10 +-
arch/powerpc/kernel/traps.c | 12 +-
arch/powerpc/platforms/83xx/suspend-asm.S | 34 +++-
arch/powerpc/platforms/embedded6xx/wii.c | 4 +
arch/powerpc/platforms/powernv/opal-msglog.c | 2 +-
arch/s390/include/asm/kvm_host.h | 2 +-
arch/s390/kernel/setup.c | 31 +++-
arch/x86/include/asm/kvm_host.h | 2 +-
arch/x86/kernel/kprobes/opt.c | 5 +
arch/x86/kvm/mmu.c | 23 ++-
arch/x86/kvm/vmx.c | 41 ++++-
arch/x86/kvm/x86.c | 4 +-
arch/x86/kvm/x86.h | 7 +-
arch/x86/xen/mmu_pv.c | 13 +-
crypto/ahash.c | 42 +++--
crypto/pcbc.c | 14 +-
crypto/shash.c | 18 +-
crypto/testmgr.c | 14 +-
drivers/acpi/device_sysfs.c | 6 +-
drivers/acpi/nfit/core.c | 14 +-
drivers/auxdisplay/ht16k33.c | 2 +-
drivers/base/power/wakeup.c | 8 +-
drivers/block/floppy.c | 2 +-
drivers/char/tpm/st33zp24/st33zp24.c | 2 +-
drivers/char/tpm/tpm-interface.c | 11 +-
drivers/char/tpm/tpm_atmel.c | 2 +-
drivers/char/tpm/tpm_crb.c | 22 ++-
drivers/char/tpm/tpm_i2c_atmel.c | 6 +-
drivers/char/tpm/tpm_i2c_infineon.c | 2 +-
drivers/char/tpm/tpm_i2c_nuvoton.c | 2 +-
drivers/char/tpm/tpm_ibmvtpm.c | 8 +-
drivers/char/tpm/tpm_infineon.c | 2 +-
drivers/char/tpm/tpm_nsc.c | 2 +-
drivers/char/tpm/tpm_tis_core.c | 2 +-
drivers/char/tpm/tpm_vtpm_proxy.c | 3 +-
drivers/char/tpm/xen-tpmfront.c | 2 +-
drivers/clk/clk-twl6040.c | 53 +++++-
drivers/clk/ingenic/cgu.c | 10 +-
drivers/clk/ingenic/cgu.h | 2 +-
drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 4 +-
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 2 +-
drivers/clk/uniphier/clk-uniphier-cpugear.c | 2 +-
drivers/clocksource/exynos_mct.c | 23 +--
drivers/cpufreq/pxa2xx-cpufreq.c | 4 +-
drivers/cpufreq/tegra124-cpufreq.c | 2 +
drivers/crypto/caam/caamalg.c | 1 +
drivers/crypto/rockchip/rk3288_crypto.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto.h | 4 +-
drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c | 39 ++++-
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 2 +-
drivers/gpu/drm/i915/i915_gem.c | 3 +-
drivers/gpu/drm/imx/imx-ldb.c | 25 ++-
drivers/gpu/drm/imx/ipuv3-plane.c | 4 +-
drivers/gpu/drm/radeon/evergreen_cs.c | 1 +
drivers/gpu/ipu-v3/ipu-common.c | 8 +-
drivers/hwtracing/intel_th/gth.c | 4 +
drivers/hwtracing/stm/core.c | 11 +-
drivers/i2c/busses/i2c-bcm2835.c | 12 ++
drivers/i2c/busses/i2c-cadence.c | 9 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
drivers/iio/adc/exynos_adc.c | 2 +-
drivers/infiniband/hw/hfi1/hfi.h | 2 +-
drivers/infiniband/hw/hfi1/init.c | 14 +-
drivers/input/keyboard/cap11xx.c | 35 ++--
drivers/input/keyboard/matrix_keypad.c | 2 +-
drivers/input/keyboard/st-keyscan.c | 4 +-
drivers/input/misc/pwm-vibra.c | 19 ++-
drivers/input/serio/ps2-gpio.c | 1 +
drivers/irqchip/irq-gic-v3-its.c | 2 +
drivers/mailbox/bcm-flexrm-mailbox.c | 4 +-
drivers/md/bcache/writeback.h | 3 +
drivers/md/dm-integrity.c | 8 +-
drivers/md/raid10.c | 2 +
drivers/md/raid5.c | 2 +
drivers/media/platform/vimc/Makefile | 3 +-
drivers/media/platform/vimc/vimc-capture.c | 18 +-
drivers/media/platform/vimc/vimc-common.c | 35 ----
drivers/media/platform/vimc/vimc-common.h | 15 +-
drivers/media/platform/vimc/vimc-debayer.c | 26 +--
drivers/media/platform/vimc/vimc-scaler.c | 28 +--
drivers/media/platform/vimc/vimc-sensor.c | 56 ++----
drivers/media/platform/vimc/vimc-streamer.c | 188 +++++++++++++++++++++
drivers/media/platform/vimc/vimc-streamer.h | 38 +++++
drivers/media/usb/uvc/uvc_video.c | 8 +
drivers/media/v4l2-core/videobuf2-v4l2.c | 1 -
drivers/misc/cxl/guest.c | 2 +
drivers/misc/cxl/pci.c | 39 ++++-
drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
drivers/net/ethernet/atheros/atlx/atl2.c | 4 +-
drivers/net/ethernet/broadcom/bcmsysport.c | 4 +
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 15 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 2 +
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 7 +-
drivers/net/ethernet/marvell/mv643xx_eth.c | 7 +-
drivers/net/ethernet/marvell/mvneta.c | 2 +-
drivers/net/ethernet/netronome/nfp/bpf/jit.c | 17 +-
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 9 +
drivers/net/usb/qmi_wwan.c | 4 +-
drivers/net/wireless/mac80211_hwsim.c | 2 +-
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 -
drivers/nvdimm/label.c | 23 ++-
drivers/nvdimm/namespace_devs.c | 4 +
drivers/nvdimm/pfn_devs.c | 4 +-
drivers/parport/parport_pc.c | 2 +-
drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
drivers/power/supply/cpcap-charger.c | 1 +
drivers/regulator/max77620-regulator.c | 10 +-
drivers/regulator/s2mpa01.c | 10 +-
drivers/regulator/s2mps11.c | 6 +-
drivers/s390/block/dasd_eckd.c | 8 +
drivers/s390/virtio/virtio_ccw.c | 4 +-
drivers/scsi/aacraid/linit.c | 13 +-
drivers/scsi/libiscsi.c | 6 +
drivers/scsi/sd.c | 59 ++++++-
drivers/scsi/virtio_scsi.c | 2 -
drivers/spi/spi-pxa2xx.c | 1 +
drivers/spi/spi-ti-qspi.c | 6 +-
drivers/staging/media/imx/imx-ic-prpencvf.c | 26 ++-
drivers/staging/media/imx/imx-media-csi.c | 42 +++--
drivers/target/iscsi/iscsi_target.c | 4 +-
drivers/tty/serial/8250/8250_of.c | 4 +
drivers/tty/serial/8250/8250_pci.c | 141 ++++++++++++++--
drivers/tty/serial/xilinx_uartps.c | 8 +-
drivers/usb/chipidea/ci_hdrc_tegra.c | 1 +
fs/9p/v9fs_vfs.h | 23 ++-
fs/9p/vfs_file.c | 6 +-
fs/9p/vfs_inode.c | 23 ++-
fs/9p/vfs_inode_dotl.c | 27 +--
fs/9p/vfs_super.c | 4 +-
fs/btrfs/acl.c | 9 +
fs/btrfs/extent_io.c | 4 +-
fs/btrfs/volumes.c | 4 +-
fs/cifs/file.c | 12 +-
fs/cifs/smb2misc.c | 17 +-
fs/cifs/smb2ops.c | 15 +-
fs/devpts/inode.c | 1 +
fs/ext2/super.c | 39 +++--
fs/ext4/ext4.h | 3 +
fs/ext4/ioctl.c | 6 +-
fs/ext4/resize.c | 3 +-
fs/jbd2/transaction.c | 33 ++--
fs/kernfs/mount.c | 8 +-
fs/nfs/nfs4idmap.c | 31 ++--
fs/nfs/nfs4proc.c | 12 +-
fs/nfs/pagelist.c | 29 +++-
fs/nfs/write.c | 11 +-
fs/nfsd/nfs3proc.c | 16 +-
fs/nfsd/nfs3xdr.c | 1 +
fs/nfsd/nfsctl.c | 2 +-
fs/pipe.c | 14 ++
fs/splice.c | 4 +
include/asm-generic/vmlinux.lds.h | 2 +-
include/keys/request_key_auth-type.h | 36 ++++
include/linux/device-mapper.h | 2 +-
include/linux/hardirq.h | 7 +
include/linux/key-type.h | 22 +--
include/linux/kvm_host.h | 2 +-
include/linux/pipe_fs_i.h | 1 +
include/linux/property.h | 2 +-
include/net/phonet/pep.h | 5 +-
init/main.c | 3 +-
kernel/cgroup/cgroup.c | 9 +-
kernel/rcu/tree.c | 20 ++-
kernel/sysctl.c | 11 +-
kernel/trace/trace.c | 1 -
kernel/trace/trace_events_hist.c | 5 +-
lib/assoc_array.c | 8 +-
mm/gup.c | 3 +-
mm/memory-failure.c | 14 +-
mm/page_alloc.c | 8 +-
mm/page_ext.c | 4 +-
mm/shmem.c | 12 +-
mm/vmalloc.c | 2 +-
net/9p/client.c | 2 +-
net/ipv4/esp4.c | 2 +-
net/ipv6/esp6.c | 2 +-
net/key/af_key.c | 40 ++---
net/mac80211/agg-tx.c | 4 +-
net/netfilter/ipvs/Kconfig | 1 +
net/netfilter/ipvs/ip_vs_core.c | 10 +-
net/netfilter/ipvs/ip_vs_ctl.c | 10 ++
net/phonet/pep.c | 32 ++--
security/keys/internal.h | 13 +-
security/keys/keyctl.c | 1 +
security/keys/process_keys.c | 1 +
security/keys/request_key.c | 72 ++++----
security/keys/request_key_auth.c | 16 +-
security/selinux/hooks.c | 5 +-
sound/soc/fsl/fsl_esai.c | 7 +-
sound/soc/sh/rcar/ssi.c | 2 +-
sound/soc/soc-dapm.c | 24 +++
sound/soc/soc-topology.c | 8 +-
tools/perf/util/auxtrace.c | 4 +-
tools/perf/util/auxtrace.h | 3 +
.../perf/util/intel-pt-decoder/intel-pt-decoder.c | 37 +++-
tools/perf/util/intel-pt.c | 2 +
virt/kvm/arm/mmu.c | 2 +-
virt/kvm/kvm_main.c | 7 +-
233 files changed, 1914 insertions(+), 937 deletions(-)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4fb873c9648e383206e0a91cef9b03aa54066aca ]
This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:
[drm:ipu_plane_atomic_check] CRTC should be enabled
[drm:drm_framebuffer_remove] *ERROR* failed to commit
------------[ cut here ]------------
WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
atomic remove_fb failed with -22
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/imx/ipuv3-plane.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index cf98596c7ce1..d0d7f6adbc89 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -348,9 +348,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
if (ret)
return ret;
- /* CRTC should be enabled */
+ /* nothing to check when disabling or disabled */
if (!crtc_state->enable)
- return -EINVAL;
+ return 0;
switch (plane->type) {
case DRM_PLANE_TYPE_PRIMARY:
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhi Jin <[email protected]>
commit a1d75dad3a2c689e70a1c4e0214cca9de741d0aa upstream.
There is a bug in the channel allocation logic that leads to an endless
loop when looking for a contiguous range of channels in a range with a
mixture of free and occupied channels. For example, opening three
consequtive channels, closing the first two and requesting 4 channels in
a row will trigger this soft lockup. The bug is that the search loop
forgets to skip over the range once it detects that one channel in that
range is occupied.
Restore the original intent to the logic by fixing the omission.
Signed-off-by: Zhi Jin <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
CC: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/stm/core.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@@ -252,6 +252,9 @@ static int find_free_channels(unsigned l
;
if (i == width)
return pos;
+
+ /* step over [pos..pos+i) to continue search */
+ pos += i;
}
return -1;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pankaj Gupta <[email protected]>
commit 42e95d1f10dcf8b18b1d7f52f7068985b3dc5b79 upstream.
when the source sg contains more than 1 fragment and
destination sg contains 1 fragment, the caam driver
mishandle the buffers to be sent to caam.
Fixes: f2147b88b2b1 ("crypto: caam - Convert GCM to new AEAD interface")
Cc: <[email protected]> # 4.2+
Signed-off-by: Pankaj Gupta <[email protected]>
Signed-off-by: Arun Pathak <[email protected]>
Reviewed-by: Horia Geanta <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/caam/caamalg.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -1097,6 +1097,7 @@ static void init_ablkcipher_job(u32 *sh_
} else {
if (edesc->dst_nents == 1) {
dst_dma = sg_dma_address(req->dst);
+ out_options = 0;
} else {
dst_dma = edesc->sec4_sg_dma + (edesc->src_nents + 1) *
sizeof(struct sec4_sg_entry);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Zhijie <[email protected]>
commit 4359669a087633132203c52d67dd8c31e09e7b2e upstream.
In some cases, the nents of src scatterlist is different from
dst scatterlist. So two variables are used to handle the nents
of src&dst scatterlist.
Reported-by: Eric Biggers <[email protected]>
Fixes: 433cd2c617bf ("crypto: rockchip - add crypto driver for rk3288")
Cc: <[email protected]> # v4.5+
Signed-off-by: Zhang Zhijie <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/rockchip/rk3288_crypto.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto.h | 3 ++-
drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c | 5 +++--
drivers/crypto/rockchip/rk3288_crypto_ahash.c | 2 +-
4 files changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/crypto/rockchip/rk3288_crypto.c
+++ b/drivers/crypto/rockchip/rk3288_crypto.c
@@ -119,7 +119,7 @@ static int rk_load_data(struct rk_crypto
count = (dev->left_bytes > PAGE_SIZE) ?
PAGE_SIZE : dev->left_bytes;
- if (!sg_pcopy_to_buffer(dev->first, dev->nents,
+ if (!sg_pcopy_to_buffer(dev->first, dev->src_nents,
dev->addr_vir, count,
dev->total - dev->left_bytes)) {
dev_err(dev->dev, "[%s:%d] pcopy err\n",
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -207,7 +207,8 @@ struct rk_crypto_info {
void *addr_vir;
int aligned;
int align_size;
- size_t nents;
+ size_t src_nents;
+ size_t dst_nents;
unsigned int total;
unsigned int count;
dma_addr_t addr_in;
--- a/drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c
@@ -260,8 +260,9 @@ static int rk_ablk_start(struct rk_crypt
dev->total = req->nbytes;
dev->sg_src = req->src;
dev->first = req->src;
- dev->nents = sg_nents(req->src);
+ dev->src_nents = sg_nents(req->src);
dev->sg_dst = req->dst;
+ dev->dst_nents = sg_nents(req->dst);
dev->aligned = 1;
spin_lock_irqsave(&dev->lock, flags);
@@ -297,7 +298,7 @@ static int rk_ablk_rx(struct rk_crypto_i
dev->unload_data(dev);
if (!dev->aligned) {
- if (!sg_pcopy_from_buffer(req->dst, dev->nents,
+ if (!sg_pcopy_from_buffer(req->dst, dev->dst_nents,
dev->addr_vir, dev->count,
dev->total - dev->left_bytes -
dev->count)) {
--- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
@@ -206,7 +206,7 @@ static int rk_ahash_start(struct rk_cryp
dev->sg_dst = NULL;
dev->sg_src = req->src;
dev->first = req->src;
- dev->nents = sg_nents(req->src);
+ dev->src_nents = sg_nents(req->src);
rctx = ahash_request_ctx(req);
rctx->mode = 0;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 33a841ce5cef4ca6c18ad333248b6d273f54c839 ]
To ensure that TX work is not running after serio port has been torn down,
let's flush it when closing the port.
Reported-by: Sven Van Asbroeck <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Reviewed-by: Sven Van Asbroeck <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/serio/ps2-gpio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c
index b50e3817f3c4..4a64ab30589c 100644
--- a/drivers/input/serio/ps2-gpio.c
+++ b/drivers/input/serio/ps2-gpio.c
@@ -76,6 +76,7 @@ static void ps2_gpio_close(struct serio *serio)
{
struct ps2_gpio_data *drvdata = serio->port_data;
+ flush_delayed_work(&drvdata->tx_work);
disable_irq(drvdata->irq);
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6157ca0d6bfe437691b1e98a62e2efe12b6714da ]
When mac80211 requests the low level driver to stop an ongoing
Tx aggregation, the low level driver is expected to call
ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready
to stop the session. The callback in turn schedules a worker
to complete the session tear down, which in turn also handles
the relevant state for the intermediate Tx queue.
However, as this flow in asynchronous, the intermediate queue
should be stopped and not continue servicing frames, as in
such a case frames that are dequeued would be marked as part
of an aggregation, although the aggregation is already been
stopped.
Fix this by stopping the intermediate Tx queue, before
calling the low level driver to stop the Tx aggregation.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/agg-tx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 197947a07f83..ed57db9b6086 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -8,7 +8,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018 - 2019 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -361,6 +361,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
+ ieee80211_agg_stop_txq(sta, tid);
+
spin_unlock_bh(&sta->lock);
ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 96d7cb932e826219ec41ac02e5af037ffae6098c ]
floppy_check_events() is supposed to return bit flags to say which
events occured. We should return zero to say that no event flags are
set. Only BIT(0) and BIT(1) are used in the caller. And .check_events
interface also expect to return an unsigned int value.
However, after commit a0c80efe5956, it may return -EINTR (-4u).
Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't
affect runtime, but it obviously is still worth fixing.
Reviewed-by: Dan Carpenter <[email protected]>
Fixes: a0c80efe5956 ("floppy: fix lock_fdc() signal handling")
Signed-off-by: Yufen Yu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/floppy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index a7f212ea17bf..3ea9c3e9acb3 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4079,7 +4079,7 @@ static unsigned int floppy_check_events(struct gendisk *disk,
if (time_after(jiffies, UDRS->last_checked + UDP->checkfreq)) {
if (lock_fdc(drive))
- return -EINTR;
+ return 0;
poll_drive(false, 0);
process_fd_request();
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 414fd080d125408cb15d04ff4907e1dd8145c8c7 ]
For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true
on x86. So the function works as long as hugetlb is configured.
However, dax doesn't depend on hugetlb.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Yu Zhao <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Keith Busch <[email protected]>
Cc: "Michael S . Tsirkin" <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/gup.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mm/gup.c b/mm/gup.c
index 4cc8a6ff0f56..7c0e5b1bbcd4 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -1643,7 +1643,8 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
if (!pmd_present(pmd))
return 0;
- if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd))) {
+ if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) ||
+ pmd_devmap(pmd))) {
/*
* NUMA hinting faults need to be handled in the GUP
* slowpath for accounting purposes and so that they
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hou Tao <[email protected]>
commit 5e3cc1ee1405a7eb3487ed24f786dec01b4cbe1f upstream.
Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
Modules linked in:
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
PC is at generic_fillattr+0x104/0x108
LR is at 0xec497f00
pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013
sp : ec497e20 ip : ed608030 fp : ec497e3c
r10: 00000000 r9 : ec497f00 r8 : ed608030
r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780
r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ac48006a DAC: 00000051
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
Backtrace:
[<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
[<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
[<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
[<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
[<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
[<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
[<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
[<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
[<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
[<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
[<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
[<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
[<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
[<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
[<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
[<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
[<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
[<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
[<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
[<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
[<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)
[[email protected]: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 7549ae3e81cc ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <[email protected]>
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/9p/v9fs_vfs.h | 23 +++++++++++++++++++++--
fs/9p/vfs_file.c | 6 +++++-
fs/9p/vfs_inode.c | 23 +++++++++++------------
fs/9p/vfs_inode_dotl.c | 27 ++++++++++++++-------------
fs/9p/vfs_super.c | 4 ++--
5 files changed, 53 insertions(+), 30 deletions(-)
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -40,6 +40,9 @@
*/
#define P9_LOCK_TIMEOUT (30*HZ)
+/* flags for v9fs_stat2inode() & v9fs_stat2inode_dotl() */
+#define V9FS_STAT2INODE_KEEP_ISIZE 1
+
extern struct file_system_type v9fs_fs_type;
extern const struct address_space_operations v9fs_addr_operations;
extern const struct file_operations v9fs_file_operations;
@@ -61,8 +64,10 @@ int v9fs_init_inode(struct v9fs_session_
struct inode *inode, umode_t mode, dev_t);
void v9fs_evict_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
-void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
-void v9fs_stat2inode_dotl(struct p9_stat_dotl *, struct inode *);
+void v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode,
+ struct super_block *sb, unsigned int flags);
+void v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode,
+ unsigned int flags);
int v9fs_dir_release(struct inode *inode, struct file *filp);
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct p9_wstat *stat);
@@ -83,4 +88,18 @@ static inline void v9fs_invalidate_inode
}
int v9fs_open_to_dotl_flags(int flags);
+
+static inline void v9fs_i_size_write(struct inode *inode, loff_t i_size)
+{
+ /*
+ * 32-bit need the lock, concurrent updates could break the
+ * sequences and make i_size_read() loop forever.
+ * 64-bit updates are atomic and can skip the locking.
+ */
+ if (sizeof(i_size) > sizeof(long))
+ spin_lock(&inode->i_lock);
+ i_size_write(inode, i_size);
+ if (sizeof(i_size) > sizeof(long))
+ spin_unlock(&inode->i_lock);
+}
#endif
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -442,7 +442,11 @@ v9fs_file_write_iter(struct kiocb *iocb,
i_size = i_size_read(inode);
if (iocb->ki_pos > i_size) {
inode_add_bytes(inode, iocb->ki_pos - i_size);
- i_size_write(inode, iocb->ki_pos);
+ /*
+ * Need to serialize against i_size_write() in
+ * v9fs_stat2inode()
+ */
+ v9fs_i_size_write(inode, iocb->ki_pos);
}
return retval;
}
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -538,7 +538,7 @@ static struct inode *v9fs_qid_iget(struc
if (retval)
goto error;
- v9fs_stat2inode(st, inode, sb);
+ v9fs_stat2inode(st, inode, sb, 0);
v9fs_cache_inode_get_cookie(inode);
unlock_new_inode(inode);
return inode;
@@ -1080,7 +1080,7 @@ v9fs_vfs_getattr(const struct path *path
if (IS_ERR(st))
return PTR_ERR(st);
- v9fs_stat2inode(st, d_inode(dentry), dentry->d_sb);
+ v9fs_stat2inode(st, d_inode(dentry), dentry->d_sb, 0);
generic_fillattr(d_inode(dentry), stat);
p9stat_free(st);
@@ -1158,12 +1158,13 @@ static int v9fs_vfs_setattr(struct dentr
* @stat: Plan 9 metadata (mistat) structure
* @inode: inode to populate
* @sb: superblock of filesystem
+ * @flags: control flags (e.g. V9FS_STAT2INODE_KEEP_ISIZE)
*
*/
void
v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode,
- struct super_block *sb)
+ struct super_block *sb, unsigned int flags)
{
umode_t mode;
char ext[32];
@@ -1204,10 +1205,11 @@ v9fs_stat2inode(struct p9_wstat *stat, s
mode = p9mode2perm(v9ses, stat);
mode |= inode->i_mode & ~S_IALLUGO;
inode->i_mode = mode;
- i_size_write(inode, stat->length);
+ if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE))
+ v9fs_i_size_write(inode, stat->length);
/* not real number of blocks, but 512 byte ones ... */
- inode->i_blocks = (i_size_read(inode) + 512 - 1) >> 9;
+ inode->i_blocks = (stat->length + 512 - 1) >> 9;
v9inode->cache_validity &= ~V9FS_INO_INVALID_ATTR;
}
@@ -1404,9 +1406,9 @@ int v9fs_refresh_inode(struct p9_fid *fi
{
int umode;
dev_t rdev;
- loff_t i_size;
struct p9_wstat *st;
struct v9fs_session_info *v9ses;
+ unsigned int flags;
v9ses = v9fs_inode2v9ses(inode);
st = p9_client_stat(fid);
@@ -1419,16 +1421,13 @@ int v9fs_refresh_inode(struct p9_fid *fi
if ((inode->i_mode & S_IFMT) != (umode & S_IFMT))
goto out;
- spin_lock(&inode->i_lock);
/*
* We don't want to refresh inode->i_size,
* because we may have cached data
*/
- i_size = inode->i_size;
- v9fs_stat2inode(st, inode, inode->i_sb);
- if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
- inode->i_size = i_size;
- spin_unlock(&inode->i_lock);
+ flags = (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) ?
+ V9FS_STAT2INODE_KEEP_ISIZE : 0;
+ v9fs_stat2inode(st, inode, inode->i_sb, flags);
out:
p9stat_free(st);
kfree(st);
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -143,7 +143,7 @@ static struct inode *v9fs_qid_iget_dotl(
if (retval)
goto error;
- v9fs_stat2inode_dotl(st, inode);
+ v9fs_stat2inode_dotl(st, inode, 0);
v9fs_cache_inode_get_cookie(inode);
retval = v9fs_get_acl(inode, fid);
if (retval)
@@ -497,7 +497,7 @@ v9fs_vfs_getattr_dotl(const struct path
if (IS_ERR(st))
return PTR_ERR(st);
- v9fs_stat2inode_dotl(st, d_inode(dentry));
+ v9fs_stat2inode_dotl(st, d_inode(dentry), 0);
generic_fillattr(d_inode(dentry), stat);
/* Change block size to what the server returned */
stat->blksize = st->st_blksize;
@@ -608,11 +608,13 @@ int v9fs_vfs_setattr_dotl(struct dentry
* v9fs_stat2inode_dotl - populate an inode structure with stat info
* @stat: stat structure
* @inode: inode to populate
+ * @flags: ctrl flags (e.g. V9FS_STAT2INODE_KEEP_ISIZE)
*
*/
void
-v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode)
+v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode,
+ unsigned int flags)
{
umode_t mode;
struct v9fs_inode *v9inode = V9FS_I(inode);
@@ -632,7 +634,8 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl
mode |= inode->i_mode & ~S_IALLUGO;
inode->i_mode = mode;
- i_size_write(inode, stat->st_size);
+ if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE))
+ v9fs_i_size_write(inode, stat->st_size);
inode->i_blocks = stat->st_blocks;
} else {
if (stat->st_result_mask & P9_STATS_ATIME) {
@@ -662,8 +665,9 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl
}
if (stat->st_result_mask & P9_STATS_RDEV)
inode->i_rdev = new_decode_dev(stat->st_rdev);
- if (stat->st_result_mask & P9_STATS_SIZE)
- i_size_write(inode, stat->st_size);
+ if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE) &&
+ stat->st_result_mask & P9_STATS_SIZE)
+ v9fs_i_size_write(inode, stat->st_size);
if (stat->st_result_mask & P9_STATS_BLOCKS)
inode->i_blocks = stat->st_blocks;
}
@@ -929,9 +933,9 @@ v9fs_vfs_get_link_dotl(struct dentry *de
int v9fs_refresh_inode_dotl(struct p9_fid *fid, struct inode *inode)
{
- loff_t i_size;
struct p9_stat_dotl *st;
struct v9fs_session_info *v9ses;
+ unsigned int flags;
v9ses = v9fs_inode2v9ses(inode);
st = p9_client_getattr_dotl(fid, P9_STATS_ALL);
@@ -943,16 +947,13 @@ int v9fs_refresh_inode_dotl(struct p9_fi
if ((inode->i_mode & S_IFMT) != (st->st_mode & S_IFMT))
goto out;
- spin_lock(&inode->i_lock);
/*
* We don't want to refresh inode->i_size,
* because we may have cached data
*/
- i_size = inode->i_size;
- v9fs_stat2inode_dotl(st, inode);
- if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
- inode->i_size = i_size;
- spin_unlock(&inode->i_lock);
+ flags = (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE) ?
+ V9FS_STAT2INODE_KEEP_ISIZE : 0;
+ v9fs_stat2inode_dotl(st, inode, flags);
out:
kfree(st);
return 0;
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -172,7 +172,7 @@ static struct dentry *v9fs_mount(struct
goto release_sb;
}
d_inode(root)->i_ino = v9fs_qid2ino(&st->qid);
- v9fs_stat2inode_dotl(st, d_inode(root));
+ v9fs_stat2inode_dotl(st, d_inode(root), 0);
kfree(st);
} else {
struct p9_wstat *st = NULL;
@@ -183,7 +183,7 @@ static struct dentry *v9fs_mount(struct
}
d_inode(root)->i_ino = v9fs_qid2ino(&st->qid);
- v9fs_stat2inode(st, d_inode(root), sb);
+ v9fs_stat2inode(st, d_inode(root), sb, 0);
p9stat_free(st);
kfree(st);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3ca232df9921f083c3b37ba5fbc76f4d9046268b ]
pwm_vibrator_stop disables the regulator, but it can be called from
multiple places, even when the regulator is already disabled. Fix this
by using regulator_is_enabled check when starting and stopping device.
Signed-off-by: Jonathan Bakker <[email protected]>
Signed-off-by: Paweł Chmiel <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/misc/pwm-vibra.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index 55da191ae550..9df87431d7d4 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -34,6 +34,7 @@ struct pwm_vibrator {
struct work_struct play_work;
u16 level;
u32 direction_duty_cycle;
+ bool vcc_on;
};
static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
@@ -42,10 +43,13 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
struct pwm_state state;
int err;
- err = regulator_enable(vibrator->vcc);
- if (err) {
- dev_err(pdev, "failed to enable regulator: %d", err);
- return err;
+ if (!vibrator->vcc_on) {
+ err = regulator_enable(vibrator->vcc);
+ if (err) {
+ dev_err(pdev, "failed to enable regulator: %d", err);
+ return err;
+ }
+ vibrator->vcc_on = true;
}
pwm_get_state(vibrator->pwm, &state);
@@ -76,7 +80,10 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
{
- regulator_disable(vibrator->vcc);
+ if (vibrator->vcc_on) {
+ regulator_disable(vibrator->vcc);
+ vibrator->vcc_on = false;
+ }
if (vibrator->pwm_dir)
pwm_disable(vibrator->pwm_dir);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c969c6e7ab8cb42b5c787c567615474fdbad9d6a ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Signed-off-by: Huang Zijiang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index 51d42d7f6074..7e82dfbb4340 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -3074,6 +3074,7 @@ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset)
dsaf_dev = dev_get_drvdata(&pdev->dev);
if (!dsaf_dev) {
dev_err(&pdev->dev, "dsaf_dev is NULL\n");
+ put_device(&pdev->dev);
return -ENODEV;
}
@@ -3081,6 +3082,7 @@ int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool dereset)
if (AE_IS_VER1(dsaf_dev->dsaf_ver)) {
dev_err(dsaf_dev->dev, "%s v1 chip doesn't support RoCE!\n",
dsaf_dev->ae_dev.name);
+ put_device(&pdev->dev);
return -ENODEV;
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ]
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 2c8411b8d050..5f8b31f879ca 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -894,8 +894,8 @@ static struct ipu_devtype ipu_type_imx51 = {
.cpmem_ofs = 0x1f000000,
.srm_ofs = 0x1f040000,
.tpm_ofs = 0x1f060000,
- .csi0_ofs = 0x1f030000,
- .csi1_ofs = 0x1f038000,
+ .csi0_ofs = 0x1e030000,
+ .csi1_ofs = 0x1e038000,
.ic_ofs = 0x1e020000,
.disp0_ofs = 0x1e040000,
.disp1_ofs = 0x1e048000,
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 94803aef3533676194c772383472636c453e3147 ]
This patch fixes order of disable calls in pwm_vibrator_stop.
Currently when starting device, we first enable vcc regulator and then
setup and enable pwm. When stopping, we should do this in oposite order,
so first disable pwm and then disable regulator.
Previously order was the same as in start.
Signed-off-by: Paweł Chmiel <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/misc/pwm-vibra.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index 9df87431d7d4..dbb6d9e1b947 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -80,14 +80,14 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
{
+ if (vibrator->pwm_dir)
+ pwm_disable(vibrator->pwm_dir);
+ pwm_disable(vibrator->pwm);
+
if (vibrator->vcc_on) {
regulator_disable(vibrator->vcc);
vibrator->vcc_on = false;
}
-
- if (vibrator->pwm_dir)
- pwm_disable(vibrator->pwm_dir);
- pwm_disable(vibrator->pwm);
}
static void pwm_vibrator_play_work(struct work_struct *work)
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhengbin <[email protected]>
commit bb06c388fa20ae24cfe80c52488de718a7e3a53f upstream.
If msize is less than 4096, we should close and put trans, destroy
tagpool, not just free client. This patch fixes that.
Link: http://lkml.kernel.org/m/[email protected]
Cc: [email protected]
Fixes: 574d356b7a02 ("9p/net: put a lower bound on msize")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: zhengbin <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/client.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -1082,7 +1082,7 @@ struct p9_client *p9_client_create(const
p9_debug(P9_DEBUG_ERROR,
"Please specify a msize of at least 4k\n");
err = -EINVAL;
- goto free_client;
+ goto close_trans;
}
err = p9_client_version(clnt);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dc30e70391376ba3987aeb856ae6d9c0706534f1 ]
In function omap4_dsi_mux_pads(), local variable "reg" could
be uninitialized if function regmap_read() returns -EINVAL.
However, it will be used directly in the later context, which
is potentially unsafe.
Signed-off-by: Yizhuo <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/display.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index b3f6eb5d04a2..6e7440ef503a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -84,6 +84,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
u32 enable_mask, enable_shift;
u32 pipd_mask, pipd_shift;
u32 reg;
+ int ret;
if (dsi_id == 0) {
enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
@@ -99,7 +100,11 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
return -ENODEV;
}
- regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®);
+ ret = regmap_read(omap4_dsi_mux_syscon,
+ OMAP4_DSIPHY_SYSCON_OFFSET,
+ ®);
+ if (ret)
+ return ret;
reg &= ~enable_mask;
reg &= ~pipd_mask;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ]
Updating LED state requires access to regmap and therefore we may sleep,
so we could not do that directly form set_brightness() method.
Historically we used private work to adjust the brightness, but with the
introduction of set_brightness_blocking() we no longer need it.
As a bonus, not having our own work item means we do not have
use-after-free issue as we neglected to cancel outstanding work on
driver unbind.
Reported-by: Sven Van Asbroeck <[email protected]>
Reviewed-by: Sven Van Asbroeck <[email protected]>
Acked-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/cap11xx.c | 35 ++++++++++----------------------
1 file changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 1a1eacae3ea1..87fb48143859 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -75,9 +75,7 @@
struct cap11xx_led {
struct cap11xx_priv *priv;
struct led_classdev cdev;
- struct work_struct work;
u32 reg;
- enum led_brightness new_brightness;
};
#endif
@@ -233,30 +231,21 @@ static void cap11xx_input_close(struct input_dev *idev)
}
#ifdef CONFIG_LEDS_CLASS
-static void cap11xx_led_work(struct work_struct *work)
+static int cap11xx_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
{
- struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+ struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
struct cap11xx_priv *priv = led->priv;
- int value = led->new_brightness;
/*
- * All LEDs share the same duty cycle as this is a HW limitation.
- * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+ * All LEDs share the same duty cycle as this is a HW
+ * limitation. Brightness levels per LED are either
+ * 0 (OFF) and 1 (ON).
*/
- regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
- BIT(led->reg), value ? BIT(led->reg) : 0);
-}
-
-static void cap11xx_led_set(struct led_classdev *cdev,
- enum led_brightness value)
-{
- struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
-
- if (led->new_brightness == value)
- return;
-
- led->new_brightness = value;
- schedule_work(&led->work);
+ return regmap_update_bits(priv->regmap,
+ CAP11XX_REG_LED_OUTPUT_CONTROL,
+ BIT(led->reg),
+ value ? BIT(led->reg) : 0);
}
static int cap11xx_init_leds(struct device *dev,
@@ -299,7 +288,7 @@ static int cap11xx_init_leds(struct device *dev,
led->cdev.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
led->cdev.flags = 0;
- led->cdev.brightness_set = cap11xx_led_set;
+ led->cdev.brightness_set_blocking = cap11xx_led_set;
led->cdev.max_brightness = 1;
led->cdev.brightness = LED_OFF;
@@ -312,8 +301,6 @@ static int cap11xx_init_leds(struct device *dev,
led->reg = reg;
led->priv = priv;
- INIT_WORK(&led->work, cap11xx_led_work);
-
error = devm_led_classdev_register(dev, &led->cdev);
if (error) {
of_node_put(child);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ]
The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 5f8b31f879ca..f3a57c0500f3 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -910,8 +910,8 @@ static struct ipu_devtype ipu_type_imx53 = {
.cpmem_ofs = 0x07000000,
.srm_ofs = 0x07040000,
.tpm_ofs = 0x07060000,
- .csi0_ofs = 0x07030000,
- .csi1_ofs = 0x07038000,
+ .csi0_ofs = 0x06030000,
+ .csi1_ofs = 0x06038000,
.ic_ofs = 0x06020000,
.disp0_ofs = 0x06040000,
.disp1_ofs = 0x06048000,
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d9111d36024de07784f2e1ba2ccf70b16035f378 ]
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic") added new rsnd_ssi_prepare() and moved
rsnd_ssi_master_clk_start() to .prepare.
But, ssi user count (= ssi->usrcnt) is incremented at .init
(= rsnd_ssi_init()).
Because of these timing exchange, ssi->usrcnt check at
rsnd_ssi_master_clk_start() should be adjusted.
Otherwise, 2nd master clock setup will be no check.
This patch fixup this issue.
Fixes: commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic")
Reported-by: Yusuke Goda <[email protected]>
Reported-by: Valentine Barshak <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Tested-by: Yusuke Goda <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 0db2791f7035..60cc550c5a4c 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -280,7 +280,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
if (rsnd_ssi_is_multi_slave(mod, io))
return 0;
- if (ssi->usrcnt > 1) {
+ if (ssi->usrcnt > 0) {
if (ssi->rate != rate) {
dev_err(dev, "SSI parent/child should use same rate\n");
return -EINVAL;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c17abcfa93bf0be5e48bb011607d237ac2bfc839 ]
Fix the mismatch between the "sdxc_d13_1_a" pin group definition from
meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a").
This makes it possible to use "sdxc_d13_1_a" in device-tree files to
route the MMC data 1..3 pins to GPIOX_1..3.
Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index a6fff215e60f..aafd39eba64f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -668,7 +668,7 @@ static const char * const sd_a_groups[] = {
static const char * const sdxc_a_groups[] = {
"sdxc_d0_0_a", "sdxc_d13_0_a", "sdxc_d47_a", "sdxc_clk_a",
- "sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d0_13_1_a"
+ "sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d13_1_a"
};
static const char * const pcm_a_groups[] = {
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 79edd00dc6a96644d76b4a1cb97d94d49e026768 ]
When a target sends Check Condition, whilst initiator is busy xmiting
re-queued data, could lead to race between iscsi_complete_task() and
iscsi_xmit_task() and eventually crashing with the following kernel
backtrace.
[3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0
[3326150.987582] WARN: Oops: 0002 [#1] SMP
[3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin
[3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1
[3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016
[3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi]
[3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000
[3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246
[3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480
[3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20
[3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008
[3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000
[3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08
[3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000
[3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660
[3326150.987918] WARN: Stack:
[3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18
[3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00
[3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400
[3326150.987964] WARN: Call Trace:
[3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi]
[3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0
[3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470
[3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870
[3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300
[3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0
[3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70
[3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.988138] WARN: RSP <ffff8801f545bdb0>
[3326150.988144] WARN: CR2: 0000000000000078
[3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]---
Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix
list corruption regression") introduced "taskqueuelock" to fix list
corruption during the race, but this wasn't enough.
Re-setting of conn->task to NULL, could race with iscsi_xmit_task().
iscsi_complete_task()
{
....
if (conn->task == task)
conn->task = NULL;
}
conn->task in iscsi_xmit_task() could be NULL and so will be task.
__iscsi_get_task(task) will crash (NullPtr de-ref), trying to access
refcount.
iscsi_xmit_task()
{
struct iscsi_task *task = conn->task;
__iscsi_get_task(task);
}
This commit will take extra conn->session->back_lock in iscsi_xmit_task()
to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if
iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race,
iscsi_xmit_task() increments task->refcount
(__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task().
Signed-off-by: Anoob Soman <[email protected]>
Signed-off-by: Bob Liu <[email protected]>
Acked-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libiscsi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 3ff536b350a1..5ea5d42bac76 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1449,7 +1449,13 @@ static int iscsi_xmit_task(struct iscsi_conn *conn)
if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx))
return -ENODATA;
+ spin_lock_bh(&conn->session->back_lock);
+ if (conn->task == NULL) {
+ spin_unlock_bh(&conn->session->back_lock);
+ return -ENODATA;
+ }
__iscsi_get_task(task);
+ spin_unlock_bh(&conn->session->back_lock);
spin_unlock_bh(&conn->session->frwd_lock);
rc = conn->session->tt->xmit_task(task);
spin_lock_bh(&conn->session->frwd_lock);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f275a4659484716259cc46268d9043424e51cf0f ]
The driver's interrupt handler checks whether a message is currently
being handled with the curr_msg pointer. When it is NULL, the interrupt
is considered to be unexpected. Similarly, the i2c_start_transfer
routine checks for the remaining number of messages to handle in
num_msgs.
However, these values are never cleared and always keep the message and
number relevant to the latest transfer (which might be done already and
the underlying message memory might have been freed).
When an unexpected interrupt hits with the DONE bit set, the isr will
then try to access the flags field of the curr_msg structure, leading
to a fatal page fault.
The msg_buf and msg_buf_remaining fields are also never cleared at the
end of the transfer, which can lead to similar pitfalls.
Fix these issues by introducing a cleanup function and always calling
it after a transfer is finished.
Fixes: e2474541032d ("i2c: bcm2835: Fix hang for writing messages larger than 16 bytes")
Signed-off-by: Paul Kocialkowski <[email protected]>
Acked-by: Stefan Wahren <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-bcm2835.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 44deae78913e..4d19254f78c8 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -191,6 +191,15 @@ static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev)
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
}
+static void bcm2835_i2c_finish_transfer(struct bcm2835_i2c_dev *i2c_dev)
+{
+ i2c_dev->curr_msg = NULL;
+ i2c_dev->num_msgs = 0;
+
+ i2c_dev->msg_buf = NULL;
+ i2c_dev->msg_buf_remaining = 0;
+}
+
/*
* Note about I2C_C_CLEAR on error:
* The I2C_C_CLEAR on errors will take some time to resolve -- if you were in
@@ -291,6 +300,9 @@ static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
time_left = wait_for_completion_timeout(&i2c_dev->completion,
adap->timeout);
+
+ bcm2835_i2c_finish_transfer(i2c_dev);
+
if (!time_left) {
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
BCM2835_I2C_C_CLEAR);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2f1ee0913ce58efe7f18fbd518bd54c598559b89 ]
This reverts commit fe53ca54270a ("mm: use early_pfn_to_nid in
page_ext_init").
When booting a system with "page_owner=on",
start_kernel
page_ext_init
invoke_init_callbacks
init_section_page_ext
init_page_owner
init_early_allocated_pages
init_zones_in_node
init_pages_in_zone
lookup_page_ext
page_to_nid
The issue here is that page_to_nid() will not work since some page flags
have no node information until later in page_alloc_init_late() due to
DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds
access with an invalid nid.
UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50
index 7 is out of range for type 'zone [5]'
Also, kernel will panic since flags were poisoned earlier with,
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_NODE_NOT_IN_PAGE_FLAGS=n
start_kernel
setup_arch
pagetable_init
paging_init
sparse_init
sparse_init_nid
memblock_alloc_try_nid_raw
It did not handle it well in init_pages_in_zone() which ends up calling
page_to_nid().
page:ffffea0004200000 is uninitialized and poisoned
raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
page_owner info is not active (free page?)
kernel BUG at include/linux/mm.h:990!
RIP: 0010:init_page_owner+0x486/0x520
This means that assumptions behind commit fe53ca54270a ("mm: use
early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert
the commit for now. A proper way to move the page_owner initialization
to sooner is to hook into memmap initialization.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Qian Cai <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Pasha Tatashin <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
init/main.c | 3 ++-
mm/page_ext.c | 4 +---
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/init/main.c b/init/main.c
index c4a45145e102..3d3d79c5a232 100644
--- a/init/main.c
+++ b/init/main.c
@@ -663,7 +663,6 @@ asmlinkage __visible void __init start_kernel(void)
initrd_start = 0;
}
#endif
- page_ext_init();
kmemleak_init();
debug_objects_mem_init();
setup_per_cpu_pageset();
@@ -1069,6 +1068,8 @@ static noinline void __init kernel_init_freeable(void)
sched_init_smp();
page_alloc_init_late();
+ /* Initialize page ext after all struct pages are initialized. */
+ page_ext_init();
do_basic_setup();
diff --git a/mm/page_ext.c b/mm/page_ext.c
index 2c16216c29b6..2c44f5b78435 100644
--- a/mm/page_ext.c
+++ b/mm/page_ext.c
@@ -396,10 +396,8 @@ void __init page_ext_init(void)
* We know some arch can have a nodes layout such as
* -------------pfn-------------->
* N0 | N1 | N2 | N0 | N1 | N2|....
- *
- * Take into account DEFERRED_STRUCT_PAGE_INIT.
*/
- if (early_pfn_to_nid(pfn) != nid)
+ if (pfn_to_nid(pfn) != nid)
continue;
if (init_section_page_ext(pfn, nid))
goto oom;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 304017d31df36fb61eb2ed3ebf65fb6870b3c731 ]
Topology resources are no longer needed if any element failed to load.
Signed-off-by: Bard liao <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-topology.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c1619860a5de..2d5cf263515b 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2513,6 +2513,7 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
struct snd_soc_tplg_ops *ops, const struct firmware *fw, u32 id)
{
struct soc_tplg tplg;
+ int ret;
/* setup parsing context */
memset(&tplg, 0, sizeof(tplg));
@@ -2526,7 +2527,12 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
tplg.bytes_ext_ops = ops->bytes_ext_ops;
tplg.bytes_ext_ops_count = ops->bytes_ext_ops_count;
- return soc_tplg_load(&tplg);
+ ret = soc_tplg_load(&tplg);
+ /* free the created components if fail to load topology */
+ if (ret)
+ snd_soc_tplg_component_remove(comp, SND_SOC_TPLG_INDEX_ALL);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_tplg_component_load);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5c59801f7018acba11b12de59017a3fcdcf7421d ]
According to the datasheet and the reference code from Allwinner, the
bit used to de-assert the TCON reset is bit 4, not bit 3.
Fix it in the V3s CCU driver.
Signed-off-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index 621b1cd996db..ac12f261f8ca 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -542,7 +542,7 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
- [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(4) },
[RST_BUS_CSI] = { 0x2c4, BIT(8) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 97dc47a1308a3af46a09b1546cfb869f2e382a81 ]
The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR
quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as
already done for other IDs shared between different devices.
Signed-off-by: Beniamino Galvani <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 25204d2c9e89..65e47cc52d14 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1193,8 +1193,8 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
{QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */
{QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */
- {QMI_FIXED_INTF(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC7304/MC7354 */
- {QMI_FIXED_INTF(0x1199, 0x68c0, 10)}, /* Sierra Wireless MC7304/MC7354 */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC7304/MC7354, WP76xx */
+ {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */
{QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */
{QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */
{QMI_FIXED_INTF(0x1199, 0x9041, 8)}, /* Sierra Wireless MC7305/MC7355 */
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ee0b27a3a4da0b0ed2318aa092f8856896e9450b ]
According to the manual the gate clock for MMC3 is at bit 11, and NAND1
is controlled by bit 12.
Fix the gate bit definitions in the clock driver.
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: Andre Przywara <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 40d5f74cb2ac..d93b4815e65c 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -252,9 +252,9 @@ static SUNXI_CCU_GATE(ahb1_mmc1_clk, "ahb1-mmc1", "ahb1",
static SUNXI_CCU_GATE(ahb1_mmc2_clk, "ahb1-mmc2", "ahb1",
0x060, BIT(10), 0);
static SUNXI_CCU_GATE(ahb1_mmc3_clk, "ahb1-mmc3", "ahb1",
- 0x060, BIT(12), 0);
+ 0x060, BIT(11), 0);
static SUNXI_CCU_GATE(ahb1_nand1_clk, "ahb1-nand1", "ahb1",
- 0x060, BIT(13), 0);
+ 0x060, BIT(12), 0);
static SUNXI_CCU_GATE(ahb1_nand0_clk, "ahb1-nand0", "ahb1",
0x060, BIT(13), 0);
static SUNXI_CCU_GATE(ahb1_sdram_clk, "ahb1-sdram", "ahb1",
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1b5ba350784242eb1f899bcffd95d2c7cff61e84 ]
Arm TC2 fails cpu hotplug stress test.
This issue was tracked down to a missing copy of the new affinity
cpumask for the vexpress-spc interrupt into struct
irq_common_data.affinity when the interrupt is migrated in
migrate_one_irq().
Fix it by replacing the arm specific hotplug cpu migration with the
generic irq code.
This is the counterpart implementation to commit 217d453d473c ("arm64:
fix a migrating irq bug when hotplug cpu").
Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y).
The vexpress-spc interrupt (irq=22) on this board is affine to CPU0.
Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when
CPU0 is hotplugged out.
Suggested-by: Marc Zyngier <[email protected]>
Signed-off-by: Dietmar Eggemann <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/Kconfig | 1 +
arch/arm/include/asm/irq.h | 1 -
arch/arm/kernel/irq.c | 62 --------------------------------------
arch/arm/kernel/smp.c | 2 +-
4 files changed, 2 insertions(+), 64 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d1346a160760..cf69aab648fb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1447,6 +1447,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
+ select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index b6f319606e30..2de321e89b94 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -25,7 +25,6 @@
#ifndef __ASSEMBLY__
struct irqaction;
struct pt_regs;
-extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
void handle_IRQ(unsigned int, struct pt_regs *);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index ece04a457486..5b07c7a31c31 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -31,7 +31,6 @@
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/seq_file.h>
-#include <linux/ratelimit.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/kallsyms.h>
@@ -119,64 +118,3 @@ int __init arch_probe_nr_irqs(void)
return nr_irqs;
}
#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_desc *desc)
-{
- struct irq_data *d = irq_desc_get_irq_data(desc);
- const struct cpumask *affinity = irq_data_get_affinity_mask(d);
- struct irq_chip *c;
- bool ret = false;
-
- /*
- * If this is a per-CPU interrupt, or the affinity does not
- * include this CPU, then we have nothing to do.
- */
- if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
- return false;
-
- if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
- affinity = cpu_online_mask;
- ret = true;
- }
-
- c = irq_data_get_irq_chip(d);
- if (!c->irq_set_affinity)
- pr_debug("IRQ%u: unable to set affinity\n", d->irq);
- else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
- cpumask_copy(irq_data_get_affinity_mask(d), affinity);
-
- return ret;
-}
-
-/*
- * The current CPU has been marked offline. Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
- unsigned int i;
- struct irq_desc *desc;
- unsigned long flags;
-
- local_irq_save(flags);
-
- for_each_irq_desc(i, desc) {
- bool affinity_broken;
-
- raw_spin_lock(&desc->lock);
- affinity_broken = migrate_one_irq(desc);
- raw_spin_unlock(&desc->lock);
-
- if (affinity_broken)
- pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
- i, smp_processor_id());
- }
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index f57333f46242..65f85737c6a2 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -254,7 +254,7 @@ int __cpu_disable(void)
/*
* OK - migrate IRQs away from this CPU
*/
- migrate_irqs();
+ irq_migrate_all_off_this_cpu();
/*
* Flush user cache and TLB mappings, and then remove this CPU
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e761a927bc9a7ee6ceb7c4f63d5922dbced87f0d ]
We have two ways to reset a vcpu:
- either through VCPU_INIT
- or through a PSCI_ON call
The first one is easy to reason about. The second one is implemented
in a more bizarre way, as it is the vcpu that handles PSCI_ON that
resets the vcpu that is being powered-on. As we need to turn the logic
around and have the target vcpu to reset itself, we must take some
preliminary steps.
Resetting the VCPU state modifies the system register state in memory,
but this may interact with vcpu_load/vcpu_put if running with preemption
disabled, which in turn may lead to corrupted system register state.
Address this by disabling preemption and doing put/load if required
around the reset logic.
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Christoffer Dall <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kvm/reset.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index a74311beda35..c1c5a57249d2 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -95,16 +95,33 @@ int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext)
* This function finds the right table above and sets the registers on
* the virtual CPU struct to their architecturally defined reset
* values.
+ *
+ * Note: This function can be called from two paths: The KVM_ARM_VCPU_INIT
+ * ioctl or as part of handling a request issued by another VCPU in the PSCI
+ * handling code. In the first case, the VCPU will not be loaded, and in the
+ * second case the VCPU will be loaded. Because this function operates purely
+ * on the memory-backed valus of system registers, we want to do a full put if
+ * we were loaded (handling a request) and load the values back at the end of
+ * the function. Otherwise we leave the state alone. In both cases, we
+ * disable preemption around the vcpu reset as we would otherwise race with
+ * preempt notifiers which also call put/load.
*/
int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
{
const struct kvm_regs *cpu_reset;
+ int ret = -EINVAL;
+ bool loaded;
+
+ preempt_disable();
+ loaded = (vcpu->cpu != -1);
+ if (loaded)
+ kvm_arch_vcpu_put(vcpu);
switch (vcpu->arch.target) {
default:
if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) {
if (!cpu_has_32bit_el1())
- return -EINVAL;
+ goto out;
cpu_reset = &default_regs_reset32;
} else {
cpu_reset = &default_regs_reset;
@@ -127,5 +144,10 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
vcpu->arch.workaround_flags |= VCPU_WORKAROUND_2_FLAG;
/* Reset timer */
- return kvm_timer_vcpu_reset(vcpu);
+ ret = kvm_timer_vcpu_reset(vcpu);
+out:
+ if (loaded)
+ kvm_arch_vcpu_load(vcpu, smp_processor_id());
+ preempt_enable();
+ return ret;
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fc2d5cfdcfe2ab76b263d91429caa22451123085 ]
Attempting to avoid cloning the skb when broadcasting by inflating
the refcount with sock_hold/sock_put while under RCU lock is dangerous
and violates RCU principles. It leads to subtle race conditions when
attempting to free the SKB, as we may reference sockets that have
already been freed by the stack.
Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c4b
[006b6b6b6b6b6c4b] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
task: fffffff78f65b380 task.stack: ffffff8049a88000
pc : sock_rfree+0x38/0x6c
lr : skb_release_head_state+0x6c/0xcc
Process repro (pid: 7117, stack limit = 0xffffff8049a88000)
Call trace:
sock_rfree+0x38/0x6c
skb_release_head_state+0x6c/0xcc
skb_release_all+0x1c/0x38
__kfree_skb+0x1c/0x30
kfree_skb+0xd0/0xf4
pfkey_broadcast+0x14c/0x18c
pfkey_sendmsg+0x1d8/0x408
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Kernel panic - not syncing: Fatal exception
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/key/af_key.c | 40 +++++++++++++++-------------------------
1 file changed, 15 insertions(+), 25 deletions(-)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 3b209cbfe1df..b095551a5773 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -196,30 +196,22 @@ static int pfkey_release(struct socket *sock)
return 0;
}
-static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2,
- gfp_t allocation, struct sock *sk)
+static int pfkey_broadcast_one(struct sk_buff *skb, gfp_t allocation,
+ struct sock *sk)
{
int err = -ENOBUFS;
- sock_hold(sk);
- if (*skb2 == NULL) {
- if (refcount_read(&skb->users) != 1) {
- *skb2 = skb_clone(skb, allocation);
- } else {
- *skb2 = skb;
- refcount_inc(&skb->users);
- }
- }
- if (*skb2 != NULL) {
- if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf) {
- skb_set_owner_r(*skb2, sk);
- skb_queue_tail(&sk->sk_receive_queue, *skb2);
- sk->sk_data_ready(sk);
- *skb2 = NULL;
- err = 0;
- }
+ if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
+ return err;
+
+ skb = skb_clone(skb, allocation);
+
+ if (skb) {
+ skb_set_owner_r(skb, sk);
+ skb_queue_tail(&sk->sk_receive_queue, skb);
+ sk->sk_data_ready(sk);
+ err = 0;
}
- sock_put(sk);
return err;
}
@@ -234,7 +226,6 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
{
struct netns_pfkey *net_pfkey = net_generic(net, pfkey_net_id);
struct sock *sk;
- struct sk_buff *skb2 = NULL;
int err = -ESRCH;
/* XXX Do we need something like netlink_overrun? I think
@@ -253,7 +244,7 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
* socket.
*/
if (pfk->promisc)
- pfkey_broadcast_one(skb, &skb2, GFP_ATOMIC, sk);
+ pfkey_broadcast_one(skb, GFP_ATOMIC, sk);
/* the exact target will be processed later */
if (sk == one_sk)
@@ -268,7 +259,7 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
continue;
}
- err2 = pfkey_broadcast_one(skb, &skb2, GFP_ATOMIC, sk);
+ err2 = pfkey_broadcast_one(skb, GFP_ATOMIC, sk);
/* Error is cleared after successful sending to at least one
* registered KM */
@@ -278,9 +269,8 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
rcu_read_unlock();
if (one_sk != NULL)
- err = pfkey_broadcast_one(skb, &skb2, allocation, one_sk);
+ err = pfkey_broadcast_one(skb, allocation, one_sk);
- kfree_skb(skb2);
kfree_skb(skb);
return err;
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 50d6b3cf9403879911e06d69c7ef41e43f8f7b4b ]
If we have a kernel configured for periodic timer interrupts, and we
have cpuidle enabled, then we end up with CPU1 losing timer interupts
after a hotplug.
This can manifest itself in RCU stall warnings, or userspace becoming
unresponsive.
The problem is that the kernel initially wants to use the TWD timer
for interrupts, but the TWD loses context when we enter the C3 cpuidle
state. Nothing reprograms the TWD after idle.
We have solved this in the past by switching to broadcast timer ticks,
and cpuidle44xx switches to that mode at boot time. However, there is
nothing to switch from periodic mode local timers after a hotplug
operation.
We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one
would expect would take care of the issue, but internally this only
deals with one-shot local timers - tick_broadcast_enable() on the other
hand only deals with periodic local timers. So, we need to call both.
Signed-off-by: Russell King <[email protected]>
[[email protected]: just standardized the subject line]
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/cpuidle44xx.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index a8b291f00109..dae514c8276a 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -152,6 +152,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF);
+ /* Enter broadcast mode for periodic timers */
+ tick_broadcast_enable();
+
+ /* Enter broadcast mode for one-shot timers */
tick_broadcast_enter();
/*
@@ -218,15 +222,6 @@ fail:
return index;
}
-/*
- * For each cpu, setup the broadcast timer because local timers
- * stops for the states above C1.
- */
-static void omap_setup_broadcast_timer(void *arg)
-{
- tick_broadcast_enable();
-}
-
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
@@ -319,8 +314,5 @@ int __init omap4_idle_init(void)
if (!cpu_clkdm[0] || !cpu_clkdm[1])
return -ENODEV;
- /* Configure the broadcast timer on each cpu */
- on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
-
return cpuidle_register(idle_driver, cpu_online_mask);
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb2ba2d75a2d673e76ddaf13a9bd30d6a8b1bb08 ]
Fix the creation of shortcuts for which the length of the index key value
is an exact multiple of the machine word size. The problem is that the
code that blanks off the unused bits of the shortcut value malfunctions if
the number of bits in the last word equals machine word size. This is due
to the "<<" operator being given a shift of zero in this case, and so the
mask that should be all zeros is all ones instead. This causes the
subsequent masking operation to clear everything rather than clearing
nothing.
Ordinarily, the presence of the hash at the beginning of the tree index key
makes the issue very hard to test for, but in this case, it was encountered
due to a development mistake that caused the hash output to be either 0
(keyring) or 1 (non-keyring) only. This made it susceptible to the
keyctl/unlink/valid test in the keyutils package.
The fix is simply to skip the blanking if the shift would be 0. For
example, an index key that is 64 bits long would produce a 0 shift and thus
a 'blank' of all 1s. This would then be inverted and AND'd onto the
index_key, incorrectly clearing the entire last word.
Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/assoc_array.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/lib/assoc_array.c b/lib/assoc_array.c
index 4e53be8bc590..9463d3445ccd 100644
--- a/lib/assoc_array.c
+++ b/lib/assoc_array.c
@@ -781,9 +781,11 @@ all_leaves_cluster_together:
new_s0->index_key[i] =
ops->get_key_chunk(index_key, i * ASSOC_ARRAY_KEY_CHUNK_SIZE);
- blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
- pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
- new_s0->index_key[keylen - 1] &= ~blank;
+ if (level & ASSOC_ARRAY_KEY_CHUNK_MASK) {
+ blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
+ pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
+ new_s0->index_key[keylen - 1] &= ~blank;
+ }
/* This now reduces to a node splitting exercise for which we'll need
* to regenerate the disparity table.
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4593403fa516a5a4cffe6883c5062d60932cbfbe ]
cards_found is a static variable, but when it enters atl2_probe(),
cards_found is set to zero, the value is not consistent with last probe,
so next behavior is not our expect.
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/atheros/atlx/atl2.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 77a1c03255de..225b4d452e0e 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1334,13 +1334,11 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *netdev;
struct atl2_adapter *adapter;
- static int cards_found;
+ static int cards_found = 0;
unsigned long mmio_start;
int mmio_len;
int err;
- cards_found = 0;
-
err = pci_enable_device(pdev);
if (err)
return err;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil <[email protected]>
commit 5e99456c20f712dcc13d9f6ca4278937d5367355 upstream.
Userspace shouldn't set bytesused to 0 for output buffers.
vb2_warn_zero_bytesused() warns about this (only once!), but it also
calls WARN_ON(1), which is confusing since it is not immediately clear
that it warns about a 0 value for bytesused.
Just drop the WARN_ON as it serves no purpose.
Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Cc: Matthias Maennich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/videobuf2-v4l2.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/media/v4l2-core/videobuf2-v4l2.c
+++ b/drivers/media/v4l2-core/videobuf2-v4l2.c
@@ -145,7 +145,6 @@ static void vb2_warn_zero_bytesused(stru
return;
check_once = true;
- WARN_ON(1);
pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n");
if (vb->vb2_queue->allow_zero_bytesused)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver O'Halloran <[email protected]>
commit 07464e88365e9236febaca9ed1a2e2006d8bc952 upstream.
Libnvdimm reserves the first 8K of pfn and devicedax namespaces to
store a superblock describing the namespace. This 8K reservation
is contained within the altmap area which the kernel uses for the
vmemmap backing for the pages within the namespace. The altmap
allows for some pages at the start of the altmap area to be reserved
and that mechanism is used to protect the superblock from being
re-used as vmemmap backing.
The number of PFNs to reserve is calculated using:
PHYS_PFN(SZ_8K)
Which is implemented as:
#define PHYS_PFN(x) ((unsigned long)((x) >> PAGE_SHIFT))
So on systems where PAGE_SIZE is greater than 8K the reservation
size is truncated to zero and the superblock area is re-used as
vmemmap backing. As a result all the namespace information stored
in the superblock (i.e. if it's a PFN or DAX namespace) is lost
and the namespace needs to be re-created to get access to the
contents.
This patch fixes this by using PFN_UP() rather than PHYS_PFN() to ensure
that at least one page is reserved. On systems with a 4K pages size this
patch should have no effect.
Cc: [email protected]
Cc: Dan Williams <[email protected]>
Fixes: ac515c084be9 ("libnvdimm, pmem, pfn: move pfn setup to the core")
Signed-off-by: Oliver O'Halloran <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvdimm/pfn_devs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nvdimm/pfn_devs.c
+++ b/drivers/nvdimm/pfn_devs.c
@@ -535,7 +535,7 @@ static unsigned long init_altmap_base(re
static unsigned long init_altmap_reserve(resource_size_t base)
{
- unsigned long reserve = PHYS_PFN(SZ_8K);
+ unsigned long reserve = PFN_UP(SZ_8K);
unsigned long base_pfn = PHYS_PFN(base);
reserve += base_pfn - PFN_SECTION_ALIGN_DOWN(base_pfn);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 822ad64d7e46a8e2c8b8a796738d7b657cbb146d ]
In the request_key() upcall mechanism there's a dependency loop by which if
a key type driver overrides the ->request_key hook and the userspace side
manages to lose the authorisation key, the auth key and the internal
construction record (struct key_construction) can keep each other pinned.
Fix this by the following changes:
(1) Killing off the construction record and using the auth key instead.
(2) Including the operation name in the auth key payload and making the
payload available outside of security/keys/.
(3) The ->request_key hook is given the authkey instead of the cons
record and operation name.
Changes (2) and (3) allow the auth key to naturally be cleaned up if the
keyring it is in is destroyed or cleared or the auth key is unlinked.
Fixes: 7ee02a316600 ("keys: Fix dependency loop between construction record and auth key")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4idmap.c | 31 ++++++------
include/keys/request_key_auth-type.h | 36 ++++++++++++++
include/linux/key-type.h | 22 +++------
security/keys/internal.h | 13 +----
security/keys/keyctl.c | 1 +
security/keys/process_keys.c | 1 +
security/keys/request_key.c | 72 +++++++++++-----------------
security/keys/request_key_auth.c | 16 ++++---
8 files changed, 100 insertions(+), 92 deletions(-)
create mode 100644 include/keys/request_key_auth-type.h
diff --git a/fs/nfs/nfs4idmap.c b/fs/nfs/nfs4idmap.c
index b6f9d84ba19b..ae2d6f220627 100644
--- a/fs/nfs/nfs4idmap.c
+++ b/fs/nfs/nfs4idmap.c
@@ -44,6 +44,7 @@
#include <linux/keyctl.h>
#include <linux/key-type.h>
#include <keys/user-type.h>
+#include <keys/request_key_auth-type.h>
#include <linux/module.h>
#include "internal.h"
@@ -59,7 +60,7 @@ static struct key_type key_type_id_resolver_legacy;
struct idmap_legacy_upcalldata {
struct rpc_pipe_msg pipe_msg;
struct idmap_msg idmap_msg;
- struct key_construction *key_cons;
+ struct key *authkey;
struct idmap *idmap;
};
@@ -384,7 +385,7 @@ static const match_table_t nfs_idmap_tokens = {
{ Opt_find_err, NULL }
};
-static int nfs_idmap_legacy_upcall(struct key_construction *, const char *, void *);
+static int nfs_idmap_legacy_upcall(struct key *, void *);
static ssize_t idmap_pipe_downcall(struct file *, const char __user *,
size_t);
static void idmap_release_pipe(struct inode *);
@@ -545,11 +546,12 @@ nfs_idmap_prepare_pipe_upcall(struct idmap *idmap,
static void
nfs_idmap_complete_pipe_upcall_locked(struct idmap *idmap, int ret)
{
- struct key_construction *cons = idmap->idmap_upcall_data->key_cons;
+ struct key *authkey = idmap->idmap_upcall_data->authkey;
kfree(idmap->idmap_upcall_data);
idmap->idmap_upcall_data = NULL;
- complete_request_key(cons, ret);
+ complete_request_key(authkey, ret);
+ key_put(authkey);
}
static void
@@ -559,15 +561,14 @@ nfs_idmap_abort_pipe_upcall(struct idmap *idmap, int ret)
nfs_idmap_complete_pipe_upcall_locked(idmap, ret);
}
-static int nfs_idmap_legacy_upcall(struct key_construction *cons,
- const char *op,
- void *aux)
+static int nfs_idmap_legacy_upcall(struct key *authkey, void *aux)
{
struct idmap_legacy_upcalldata *data;
+ struct request_key_auth *rka = get_request_key_auth(authkey);
struct rpc_pipe_msg *msg;
struct idmap_msg *im;
struct idmap *idmap = (struct idmap *)aux;
- struct key *key = cons->key;
+ struct key *key = rka->target_key;
int ret = -ENOKEY;
if (!aux)
@@ -582,7 +583,7 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons,
msg = &data->pipe_msg;
im = &data->idmap_msg;
data->idmap = idmap;
- data->key_cons = cons;
+ data->authkey = key_get(authkey);
ret = nfs_idmap_prepare_message(key->description, idmap, im, msg);
if (ret < 0)
@@ -600,7 +601,7 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons,
out2:
kfree(data);
out1:
- complete_request_key(cons, ret);
+ complete_request_key(authkey, ret);
return ret;
}
@@ -647,9 +648,10 @@ out:
static ssize_t
idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
{
+ struct request_key_auth *rka;
struct rpc_inode *rpci = RPC_I(file_inode(filp));
struct idmap *idmap = (struct idmap *)rpci->private;
- struct key_construction *cons;
+ struct key *authkey;
struct idmap_msg im;
size_t namelen_in;
int ret = -ENOKEY;
@@ -661,7 +663,8 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
if (idmap->idmap_upcall_data == NULL)
goto out_noupcall;
- cons = idmap->idmap_upcall_data->key_cons;
+ authkey = idmap->idmap_upcall_data->authkey;
+ rka = get_request_key_auth(authkey);
if (mlen != sizeof(im)) {
ret = -ENOSPC;
@@ -686,9 +689,9 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
ret = nfs_idmap_read_and_verify_message(&im,
&idmap->idmap_upcall_data->idmap_msg,
- cons->key, cons->authkey);
+ rka->target_key, authkey);
if (ret >= 0) {
- key_set_timeout(cons->key, nfs_idmap_cache_timeout);
+ key_set_timeout(rka->target_key, nfs_idmap_cache_timeout);
ret = mlen;
}
diff --git a/include/keys/request_key_auth-type.h b/include/keys/request_key_auth-type.h
new file mode 100644
index 000000000000..a726dd3f1dc6
--- /dev/null
+++ b/include/keys/request_key_auth-type.h
@@ -0,0 +1,36 @@
+/* request_key authorisation token key type
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells ([email protected])
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_REQUEST_KEY_AUTH_TYPE_H
+#define _KEYS_REQUEST_KEY_AUTH_TYPE_H
+
+#include <linux/key.h>
+
+/*
+ * Authorisation record for request_key().
+ */
+struct request_key_auth {
+ struct key *target_key;
+ struct key *dest_keyring;
+ const struct cred *cred;
+ void *callout_info;
+ size_t callout_len;
+ pid_t pid;
+ char op[8];
+} __randomize_layout;
+
+static inline struct request_key_auth *get_request_key_auth(const struct key *key)
+{
+ return key->payload.data[0];
+}
+
+
+#endif /* _KEYS_REQUEST_KEY_AUTH_TYPE_H */
diff --git a/include/linux/key-type.h b/include/linux/key-type.h
index 9520fc3c3b9a..dfb3ba782d2c 100644
--- a/include/linux/key-type.h
+++ b/include/linux/key-type.h
@@ -17,15 +17,6 @@
#ifdef CONFIG_KEYS
-/*
- * key under-construction record
- * - passed to the request_key actor if supplied
- */
-struct key_construction {
- struct key *key; /* key being constructed */
- struct key *authkey;/* authorisation for key being constructed */
-};
-
/*
* Pre-parsed payload, used by key add, update and instantiate.
*
@@ -47,8 +38,7 @@ struct key_preparsed_payload {
time_t expiry; /* Expiry time of key */
} __randomize_layout;
-typedef int (*request_key_actor_t)(struct key_construction *key,
- const char *op, void *aux);
+typedef int (*request_key_actor_t)(struct key *auth_key, void *aux);
/*
* Preparsed matching criterion.
@@ -170,20 +160,20 @@ extern int key_instantiate_and_link(struct key *key,
const void *data,
size_t datalen,
struct key *keyring,
- struct key *instkey);
+ struct key *authkey);
extern int key_reject_and_link(struct key *key,
unsigned timeout,
unsigned error,
struct key *keyring,
- struct key *instkey);
-extern void complete_request_key(struct key_construction *cons, int error);
+ struct key *authkey);
+extern void complete_request_key(struct key *authkey, int error);
static inline int key_negate_and_link(struct key *key,
unsigned timeout,
struct key *keyring,
- struct key *instkey)
+ struct key *authkey)
{
- return key_reject_and_link(key, timeout, ENOKEY, keyring, instkey);
+ return key_reject_and_link(key, timeout, ENOKEY, keyring, authkey);
}
extern int generic_key_instantiate(struct key *key, struct key_preparsed_payload *prep);
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 503adbae7b0d..e3a573840186 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -188,20 +188,9 @@ static inline int key_permission(const key_ref_t key_ref, unsigned perm)
return key_task_permission(key_ref, current_cred(), perm);
}
-/*
- * Authorisation record for request_key().
- */
-struct request_key_auth {
- struct key *target_key;
- struct key *dest_keyring;
- const struct cred *cred;
- void *callout_info;
- size_t callout_len;
- pid_t pid;
-} __randomize_layout;
-
extern struct key_type key_type_request_key_auth;
extern struct key *request_key_auth_new(struct key *target,
+ const char *op,
const void *callout_info,
size_t callout_len,
struct key *dest_keyring);
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 1ffe60bb2845..ca31af186abd 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -26,6 +26,7 @@
#include <linux/security.h>
#include <linux/uio.h>
#include <linux/uaccess.h>
+#include <keys/request_key_auth-type.h>
#include "internal.h"
#define KEY_MAX_DESC_SIZE 4096
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 740affd65ee9..5f2993ab2d50 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -20,6 +20,7 @@
#include <linux/security.h>
#include <linux/user_namespace.h>
#include <linux/uaccess.h>
+#include <keys/request_key_auth-type.h>
#include "internal.h"
/* Session keyring create vs join semaphore */
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index c707fdbb3429..2ecd67221476 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -18,31 +18,30 @@
#include <linux/keyctl.h>
#include <linux/slab.h>
#include "internal.h"
+#include <keys/request_key_auth-type.h>
#define key_negative_timeout 60 /* default timeout on a negative key's existence */
/**
* complete_request_key - Complete the construction of a key.
- * @cons: The key construction record.
+ * @auth_key: The authorisation key.
* @error: The success or failute of the construction.
*
* Complete the attempt to construct a key. The key will be negated
* if an error is indicated. The authorisation key will be revoked
* unconditionally.
*/
-void complete_request_key(struct key_construction *cons, int error)
+void complete_request_key(struct key *authkey, int error)
{
- kenter("{%d,%d},%d", cons->key->serial, cons->authkey->serial, error);
+ struct request_key_auth *rka = get_request_key_auth(authkey);
+ struct key *key = rka->target_key;
+
+ kenter("%d{%d},%d", authkey->serial, key->serial, error);
if (error < 0)
- key_negate_and_link(cons->key, key_negative_timeout, NULL,
- cons->authkey);
+ key_negate_and_link(key, key_negative_timeout, NULL, authkey);
else
- key_revoke(cons->authkey);
-
- key_put(cons->key);
- key_put(cons->authkey);
- kfree(cons);
+ key_revoke(authkey);
}
EXPORT_SYMBOL(complete_request_key);
@@ -91,21 +90,19 @@ static int call_usermodehelper_keys(const char *path, char **argv, char **envp,
* Request userspace finish the construction of a key
* - execute "/sbin/request-key <op> <key> <uid> <gid> <keyring> <keyring> <keyring>"
*/
-static int call_sbin_request_key(struct key_construction *cons,
- const char *op,
- void *aux)
+static int call_sbin_request_key(struct key *authkey, void *aux)
{
static char const request_key[] = "/sbin/request-key";
+ struct request_key_auth *rka = get_request_key_auth(authkey);
const struct cred *cred = current_cred();
key_serial_t prkey, sskey;
- struct key *key = cons->key, *authkey = cons->authkey, *keyring,
- *session;
+ struct key *key = rka->target_key, *keyring, *session;
char *argv[9], *envp[3], uid_str[12], gid_str[12];
char key_str[12], keyring_str[3][12];
char desc[20];
int ret, i;
- kenter("{%d},{%d},%s", key->serial, authkey->serial, op);
+ kenter("{%d},{%d},%s", key->serial, authkey->serial, rka->op);
ret = install_user_keyrings();
if (ret < 0)
@@ -163,7 +160,7 @@ static int call_sbin_request_key(struct key_construction *cons,
/* set up the argument list */
i = 0;
argv[i++] = (char *)request_key;
- argv[i++] = (char *) op;
+ argv[i++] = (char *)rka->op;
argv[i++] = key_str;
argv[i++] = uid_str;
argv[i++] = gid_str;
@@ -191,7 +188,7 @@ error_link:
key_put(keyring);
error_alloc:
- complete_request_key(cons, ret);
+ complete_request_key(authkey, ret);
kleave(" = %d", ret);
return ret;
}
@@ -205,42 +202,31 @@ static int construct_key(struct key *key, const void *callout_info,
size_t callout_len, void *aux,
struct key *dest_keyring)
{
- struct key_construction *cons;
request_key_actor_t actor;
struct key *authkey;
int ret;
kenter("%d,%p,%zu,%p", key->serial, callout_info, callout_len, aux);
- cons = kmalloc(sizeof(*cons), GFP_KERNEL);
- if (!cons)
- return -ENOMEM;
-
/* allocate an authorisation key */
- authkey = request_key_auth_new(key, callout_info, callout_len,
+ authkey = request_key_auth_new(key, "create", callout_info, callout_len,
dest_keyring);
- if (IS_ERR(authkey)) {
- kfree(cons);
- ret = PTR_ERR(authkey);
- authkey = NULL;
- } else {
- cons->authkey = key_get(authkey);
- cons->key = key_get(key);
+ if (IS_ERR(authkey))
+ return PTR_ERR(authkey);
- /* make the call */
- actor = call_sbin_request_key;
- if (key->type->request_key)
- actor = key->type->request_key;
+ /* Make the call */
+ actor = call_sbin_request_key;
+ if (key->type->request_key)
+ actor = key->type->request_key;
- ret = actor(cons, "create", aux);
+ ret = actor(authkey, aux);
- /* check that the actor called complete_request_key() prior to
- * returning an error */
- WARN_ON(ret < 0 &&
- !test_bit(KEY_FLAG_REVOKED, &authkey->flags));
- key_put(authkey);
- }
+ /* check that the actor called complete_request_key() prior to
+ * returning an error */
+ WARN_ON(ret < 0 &&
+ !test_bit(KEY_FLAG_REVOKED, &authkey->flags));
+ key_put(authkey);
kleave(" = %d", ret);
return ret;
}
@@ -275,7 +261,7 @@ static int construct_get_dest_keyring(struct key **_dest_keyring)
if (cred->request_key_auth) {
authkey = cred->request_key_auth;
down_read(&authkey->sem);
- rka = authkey->payload.data[0];
+ rka = get_request_key_auth(authkey);
if (!test_bit(KEY_FLAG_REVOKED,
&authkey->flags))
dest_keyring =
diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c
index 6797843154f0..5e515791ccd1 100644
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -18,7 +18,7 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
#include "internal.h"
-#include <keys/user-type.h>
+#include <keys/request_key_auth-type.h>
static int request_key_auth_preparse(struct key_preparsed_payload *);
static void request_key_auth_free_preparse(struct key_preparsed_payload *);
@@ -69,7 +69,7 @@ static int request_key_auth_instantiate(struct key *key,
static void request_key_auth_describe(const struct key *key,
struct seq_file *m)
{
- struct request_key_auth *rka = key->payload.data[0];
+ struct request_key_auth *rka = get_request_key_auth(key);
seq_puts(m, "key:");
seq_puts(m, key->description);
@@ -84,7 +84,7 @@ static void request_key_auth_describe(const struct key *key,
static long request_key_auth_read(const struct key *key,
char __user *buffer, size_t buflen)
{
- struct request_key_auth *rka = key->payload.data[0];
+ struct request_key_auth *rka = get_request_key_auth(key);
size_t datalen;
long ret;
@@ -110,7 +110,7 @@ static long request_key_auth_read(const struct key *key,
*/
static void request_key_auth_revoke(struct key *key)
{
- struct request_key_auth *rka = key->payload.data[0];
+ struct request_key_auth *rka = get_request_key_auth(key);
kenter("{%d}", key->serial);
@@ -137,7 +137,7 @@ static void free_request_key_auth(struct request_key_auth *rka)
*/
static void request_key_auth_destroy(struct key *key)
{
- struct request_key_auth *rka = key->payload.data[0];
+ struct request_key_auth *rka = get_request_key_auth(key);
kenter("{%d}", key->serial);
@@ -148,8 +148,9 @@ static void request_key_auth_destroy(struct key *key)
* Create an authorisation token for /sbin/request-key or whoever to gain
* access to the caller's security data.
*/
-struct key *request_key_auth_new(struct key *target, const void *callout_info,
- size_t callout_len, struct key *dest_keyring)
+struct key *request_key_auth_new(struct key *target, const char *op,
+ const void *callout_info, size_t callout_len,
+ struct key *dest_keyring)
{
struct request_key_auth *rka, *irka;
const struct cred *cred = current->cred;
@@ -167,6 +168,7 @@ struct key *request_key_auth_new(struct key *target, const void *callout_info,
if (!rka->callout_info)
goto error_free_rka;
rka->callout_len = callout_len;
+ strlcpy(rka->op, op, sizeof(rka->op));
/* see if the calling process is already servicing the key request of
* another process */
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yang <[email protected]>
commit f101ada7da6551127d192c2f1742c1e9e0f62799 upstream.
When trying to see whether current nd_region intersects with others,
trim_pfn_device() has already calculated the *size* to be expanded to
SECTION size.
Do not double append 'adjust' to 'size' when calculating whether the end
of a region collides with the next pmem region.
Fixes: ae86cbfef381 "libnvdimm, pfn: Pad pfn namespaces relative to other regions"
Cc: <[email protected]>
Signed-off-by: Wei Yang <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvdimm/pfn_devs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nvdimm/pfn_devs.c
+++ b/drivers/nvdimm/pfn_devs.c
@@ -618,7 +618,7 @@ static void trim_pfn_device(struct nd_pf
if (region_intersects(start, size, IORESOURCE_SYSTEM_RAM,
IORES_DESC_NONE) == REGION_MIXED
|| !IS_ALIGNED(end, nd_pfn->align)
- || nd_region_conflict(nd_region, start, size + adjust))
+ || nd_region_conflict(nd_region, start, size))
*end_trunc = end - phys_pmem_align_down(nd_pfn, end);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a40061ea2e39494104602b3048751341bda374a1 ]
SYSTEMPORT has its RXCHK parser block that attempts to validate the
packet structures, unfortunately setting the L2 header check bit will
cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look
like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.
Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index ed3edb17fd09..79018fea7be2 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -134,6 +134,10 @@ static int bcm_sysport_set_rx_csum(struct net_device *dev,
priv->rx_chk_en = !!(wanted & NETIF_F_RXCSUM);
reg = rxchk_readl(priv, RXCHK_CONTROL);
+ /* Clear L2 header checks, which would prevent BPDUs
+ * from being received.
+ */
+ reg &= ~RXCHK_L2_HDR_DIS;
if (priv->rx_chk_en)
reg |= RXCHK_EN;
else
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 69ef9bc54715fb1cb7786ada15774e469e822209 ]
On module unload/remove, we need to ensure that work does not run
after we have freed resources. Concretely, cancel_delayed_work()
may return while the callback function is still running.
>From kernel/workqueue.c:
The work callback function may still be running on return,
unless it returns true and the work doesn't re-arm itself.
Explicitly flush or use cancel_delayed_work_sync() to wait on it.
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: Sven Van Asbroeck <[email protected]>
Reviewed-by: Dmitry Torokhov <[email protected]>
Reviewed-by: Sven Van Asbroeck <[email protected]>
Acked-by: Robin van der Gracht <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/ht16k33.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index fbfa5b4cc567..a93ded300740 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -517,7 +517,7 @@ static int ht16k33_remove(struct i2c_client *client)
struct ht16k33_priv *priv = i2c_get_clientdata(client);
struct ht16k33_fbdev *fbdev = &priv->fbdev;
- cancel_delayed_work(&fbdev->work);
+ cancel_delayed_work_sync(&fbdev->work);
unregister_framebuffer(fbdev->info);
framebuffer_release(fbdev->info);
free_page((unsigned long) fbdev->buffer);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ]
This patch fixes the following static checker warning:
drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Gabriel Fernandez <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/st-keyscan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
index babcfb165e4f..3b85631fde91 100644
--- a/drivers/input/keyboard/st-keyscan.c
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -153,6 +153,8 @@ static int keyscan_probe(struct platform_device *pdev)
input_dev->id.bustype = BUS_HOST;
+ keypad_data->input_dev = input_dev;
+
error = keypad_matrix_key_parse_dt(keypad_data);
if (error)
return error;
@@ -168,8 +170,6 @@ static int keyscan_probe(struct platform_device *pdev)
input_set_drvdata(input_dev, keypad_data);
- keypad_data->input_dev = input_dev;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad_data->base))
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8be3dadf04050c2907760ec1955ca1c8fbc25585 ]
The ll2 forwards all syn packets to the driver without validating the mac
address. Add validation check in the driver's iWARP listener flow and drop
the packet if it isn't intended for the device.
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index eb666877d1aa..bb09f5a9846f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -1651,6 +1651,15 @@ qed_iwarp_parse_rx_pkt(struct qed_hwfn *p_hwfn,
eth_hlen = ETH_HLEN + (vlan_valid ? sizeof(u32) : 0);
+ if (!ether_addr_equal(ethh->h_dest,
+ p_hwfn->p_rdma_info->iwarp.mac_addr)) {
+ DP_VERBOSE(p_hwfn,
+ QED_MSG_RDMA,
+ "Got unexpected mac %pM instead of %pM\n",
+ ethh->h_dest, p_hwfn->p_rdma_info->iwarp.mac_addr);
+ return -EINVAL;
+ }
+
ether_addr_copy(remote_mac_addr, ethh->h_source);
ether_addr_copy(local_mac_addr, ethh->h_dest);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a8fef9ba58c9966ddb1fec916d8d8137c9d8bc89 ]
Booting 4.20 on SolidRun Clearfog issues this warning with DMA API
debug enabled:
WARNING: CPU: 0 PID: 555 at kernel/dma/debug.c:1230 check_sync+0x514/0x5bc
mvneta f1070000.ethernet: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000002dd7dc00] [size=240 bytes]
Modules linked in: ahci mv88e6xxx dsa_core xhci_plat_hcd xhci_hcd devlink armada_thermal marvell_cesa des_generic ehci_orion phy_armada38x_comphy mcp3021 spi_orion evbug sfp mdio_i2c ip_tables x_tables
CPU: 0 PID: 555 Comm: bridge-network- Not tainted 4.20.0+ #291
Hardware name: Marvell Armada 380/385 (Device Tree)
[<c0019638>] (unwind_backtrace) from [<c0014888>] (show_stack+0x10/0x14)
[<c0014888>] (show_stack) from [<c07f54e0>] (dump_stack+0x9c/0xd4)
[<c07f54e0>] (dump_stack) from [<c00312bc>] (__warn+0xf8/0x124)
[<c00312bc>] (__warn) from [<c00313b0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313b0>] (warn_slowpath_fmt) from [<c00b0370>] (check_sync+0x514/0x5bc)
[<c00b0370>] (check_sync) from [<c00b04f8>] (debug_dma_sync_single_range_for_cpu+0x6c/0x74)
[<c00b04f8>] (debug_dma_sync_single_range_for_cpu) from [<c051bd14>] (mvneta_poll+0x298/0xf58)
[<c051bd14>] (mvneta_poll) from [<c0656194>] (net_rx_action+0x128/0x424)
[<c0656194>] (net_rx_action) from [<c000a230>] (__do_softirq+0xf0/0x540)
[<c000a230>] (__do_softirq) from [<c00386e0>] (irq_exit+0x124/0x144)
[<c00386e0>] (irq_exit) from [<c009b5e0>] (__handle_domain_irq+0x58/0xb0)
[<c009b5e0>] (__handle_domain_irq) from [<c03a63c4>] (gic_handle_irq+0x48/0x98)
[<c03a63c4>] (gic_handle_irq) from [<c0009a10>] (__irq_svc+0x70/0x98)
...
This appears to be caused by mvneta_rx_hwbm() calling
dma_sync_single_range_for_cpu() with the wrong struct device pointer,
as the buffer manager device pointer is used to map and unmap the
buffer. Fix this.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 074a5b79d691..f76cbefeb3c7 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2102,7 +2102,7 @@ err_drop_frame:
if (unlikely(!skb))
goto err_drop_frame_ret_pool;
- dma_sync_single_range_for_cpu(dev->dev.parent,
+ dma_sync_single_range_for_cpu(&pp->bm_priv->pdev->dev,
rx_desc->buf_phys_addr,
MVNETA_MH_SIZE + NET_SKB_PAD,
rx_bytes,
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit d72b9d4acd548251f55b16843fc7a05dc5c80de8 upstream.
The SIMD routine ported from x86 used to have a special code path
for inputs < 16 bytes, which got lost somewhere along the way.
Instead, the current glue code aligns the input pointer to 16 bytes,
which is not really necessary on this architecture (although it
could be beneficial to performance to expose aligned data to the
the NEON routine), but this could result in inputs of less than
16 bytes to be passed in. This not only fails the new extended
tests that Eric has implemented, it also results in the code
reading past the end of the input, which could potentially result
in crashes when dealing with less than 16 bytes of input at the
end of a page which is followed by an unmapped page.
So update the glue code to only invoke the NEON routine if the
input is at least 16 bytes.
Reported-by: Eric Biggers <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Fixes: 6ef5737f3931 ("crypto: arm64/crct10dif - port x86 SSE implementation to arm64")
Cc: <[email protected]> # v4.10+
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/crypto/crct10dif-ce-glue.c | 25 ++++++-------------------
1 file changed, 6 insertions(+), 19 deletions(-)
--- a/arch/arm64/crypto/crct10dif-ce-glue.c
+++ b/arch/arm64/crypto/crct10dif-ce-glue.c
@@ -36,26 +36,13 @@ static int crct10dif_update(struct shash
unsigned int length)
{
u16 *crc = shash_desc_ctx(desc);
- unsigned int l;
- if (unlikely((u64)data % CRC_T10DIF_PMULL_CHUNK_SIZE)) {
- l = min_t(u32, length, CRC_T10DIF_PMULL_CHUNK_SIZE -
- ((u64)data % CRC_T10DIF_PMULL_CHUNK_SIZE));
-
- *crc = crc_t10dif_generic(*crc, data, l);
-
- length -= l;
- data += l;
- }
-
- if (length > 0) {
- if (may_use_simd()) {
- kernel_neon_begin();
- *crc = crc_t10dif_pmull(*crc, data, length);
- kernel_neon_end();
- } else {
- *crc = crc_t10dif_generic(*crc, data, length);
- }
+ if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && may_use_simd()) {
+ kernel_neon_begin();
+ *crc = crc_t10dif_pmull(*crc, data, length);
+ kernel_neon_end();
+ } else {
+ *crc = crc_t10dif_generic(*crc, data, length);
}
return 0;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 17407715240456448e4989bee46ffc93991add83 ]
genlmsg_reply can fail, so propagate its return code
Signed-off-by: Li RongQing <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 8f57ca969c9f..27224dc26413 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3241,7 +3241,7 @@ static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info)
goto out_err;
}
- genlmsg_reply(skb, info);
+ res = genlmsg_reply(skb, info);
break;
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <[email protected]>
commit ef070b4e4aa25bb5f8632ad196644026c11903bf upstream.
When the commit b6ced294fb61
("spi: pxa2xx: Switch to SPI core DMA mapping functionality")
switches to SPI core provided DMA helpers, it missed to setup maximum
supported DMA transfer length for the controller and thus users
mistakenly try to send more data than supported with the following
warning:
ili9341 spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536
Setup maximum supported DMA transfer length in order to make users know
the limit.
Fixes: b6ced294fb61 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality")
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-pxa2xx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1698,6 +1698,7 @@ static int pxa2xx_spi_probe(struct platf
platform_info->enable_dma = false;
} else {
master->can_dma = pxa2xx_spi_can_dma;
+ master->max_dma_len = MAX_DMA_LEN;
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
commit bf7cbaae0831252b416f375ca9b1027ecd4642dd upstream.
Using STP_POLICY_ID_SET ioctl command with dummy_stm device, or any STM
device that supplies zero mmio channel size, will trigger a division by
zero bug in the kernel.
Prevent this by disallowing channel widths other than 1 for such devices.
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
CC: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/stm/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@@ -561,7 +561,7 @@ static int stm_char_policy_set_ioctl(str
{
struct stm_device *stm = stmf->stm;
struct stp_policy_id *id;
- int ret = -EINVAL;
+ int ret = -EINVAL, wlimit = 1;
u32 size;
if (stmf->output.nr_chans)
@@ -589,8 +589,10 @@ static int stm_char_policy_set_ioctl(str
if (id->__reserved_0 || id->__reserved_1)
goto err_free;
- if (id->width < 1 ||
- id->width > PAGE_SIZE / stm->data->sw_mmiosz)
+ if (stm->data->sw_mmiosz)
+ wlimit = PAGE_SIZE / stm->data->sw_mmiosz;
+
+ if (id->width < 1 || id->width > wlimit)
goto err_free;
ret = stm_file_assign(stmf, id->id, id->width);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: BOUGH CHEN <[email protected]>
commit de0a0decf2edfc5b0c782915f4120cf990a9bd13 upstream.
Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/
MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS,
we can not do tuning reset, otherwise HS400 timing is not right.
Here is the process of init HS400, first finish tuning in HS200 mode,
then switch to HS mode and 8 bit DDR mode, finally switch to HS400
mode. If we do tuning reset in HS mode, this will cause HS400 mode
lost the tuning setting, which will cause CRC error.
Signed-off-by: Haibo Chen <[email protected]>
Cc: [email protected] # v4.12+
Acked-by: Adrian Hunter <[email protected]>
Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card")
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -961,6 +961,7 @@ static void esdhc_set_uhs_signaling(stru
case MMC_TIMING_UHS_SDR25:
case MMC_TIMING_UHS_SDR50:
case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS:
case MMC_TIMING_MMC_HS200:
writel(m, host->ioaddr + ESDHC_MIX_CTRL);
break;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0dd563b9a62c4cbabf5d4fd6596440c2491e72b1 ]
At the end of NIC VF initialization VF sends CFG_DONE message to PF without
using nicvf_msg_send_to_pf routine. This potentially could re-write data in
mailbox. This commit is to implement common way of sending CFG_DONE message
by the same way with other configuration messages by using
nicvf_send_msg_to_pf() routine.
Signed-off-by: Vadim Lomovtsev <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index d89ec4724efd..819f38a3225d 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -1030,7 +1030,7 @@ static void nic_handle_mbx_intr(struct nicpf *nic, int vf)
case NIC_MBOX_MSG_CFG_DONE:
/* Last message of VF config msg sequence */
nic_enable_vf(nic, vf, true);
- goto unlock;
+ break;
case NIC_MBOX_MSG_SHUTDOWN:
/* First msg in VF teardown sequence */
if (vf >= nic->num_vf_en)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index f13256af8031..59b62b49ad48 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -166,6 +166,17 @@ static int nicvf_check_pf_ready(struct nicvf *nic)
return 1;
}
+static void nicvf_send_cfg_done(struct nicvf *nic)
+{
+ union nic_mbx mbx = {};
+
+ mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
+ if (nicvf_send_msg_to_pf(nic, &mbx)) {
+ netdev_err(nic->netdev,
+ "PF didn't respond to CFG DONE msg\n");
+ }
+}
+
static void nicvf_read_bgx_stats(struct nicvf *nic, struct bgx_stats_msg *bgx)
{
if (bgx->rx)
@@ -1329,7 +1340,6 @@ int nicvf_open(struct net_device *netdev)
struct nicvf *nic = netdev_priv(netdev);
struct queue_set *qs = nic->qs;
struct nicvf_cq_poll *cq_poll = NULL;
- union nic_mbx mbx = {};
netif_carrier_off(netdev);
@@ -1419,8 +1429,7 @@ int nicvf_open(struct net_device *netdev)
nicvf_enable_intr(nic, NICVF_INTR_RBDR, qidx);
/* Send VF config done msg to PF */
- mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
- nicvf_write_to_mbx(nic, &mbx);
+ nicvf_send_cfg_done(nic);
return 0;
cleanup:
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stuart Menefy <[email protected]>
commit a5719a40aef956ba704f2aa1c7b977224d60fa96 upstream.
When a timer tick occurs and the clock is in one-shot mode, the timer
needs to be stopped to prevent it triggering subsequent interrupts.
Currently this code is in exynos4_mct_tick_clear(), but as it is
only needed when an ISR occurs move it into exynos4_mct_tick_isr(),
leaving exynos4_mct_tick_clear() just doing what its name suggests it
should.
Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Cc: [email protected] # v4.3+
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clocksource/exynos_mct.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -388,6 +388,13 @@ static void exynos4_mct_tick_start(unsig
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
}
+static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+{
+ /* Clear the MCT tick interrupt */
+ if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+}
+
static int exynos4_tick_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@@ -420,8 +427,11 @@ static int set_state_periodic(struct clo
return 0;
}
-static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = &mevt->evt;
+
/*
* This is for supporting oneshot mode.
* Mct would generate interrupt periodically
@@ -430,16 +440,6 @@ static void exynos4_mct_tick_clear(struc
if (!clockevent_state_periodic(&mevt->evt))
exynos4_mct_tick_stop(mevt);
- /* Clear the MCT tick interrupt */
- if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
-}
-
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
-{
- struct mct_clock_event_device *mevt = dev_id;
- struct clock_event_device *evt = &mevt->evt;
-
exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f8a15f97664178f27dfbf86a38f780a532cb6df0 ]
ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause data corruption if this area is used for DMA IO.
Fix the issue by avoiding the PREFETCHW. This leads to performance
degradation but it is OK as we'll introduce new memcpy implementation
optimized for unaligned memory access using.
We also cut off all PREFETCH instructions at they are quite useless
here:
* we call PREFETCH right before LOAD instruction call.
* we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64)
in a main logical loop. so we call PREFETCH 4 times (or 2 times)
for each L1 cache line (in case of 64B L1 cache Line which is
default case). Obviously this is not optimal.
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/lib/memcpy-archs.S | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S
index d61044dd8b58..ea14b0bf3116 100644
--- a/arch/arc/lib/memcpy-archs.S
+++ b/arch/arc/lib/memcpy-archs.S
@@ -25,15 +25,11 @@
#endif
#ifdef CONFIG_ARC_HAS_LL64
-# define PREFETCH_READ(RX) prefetch [RX, 56]
-# define PREFETCH_WRITE(RX) prefetchw [RX, 64]
# define LOADX(DST,RX) ldd.ab DST, [RX, 8]
# define STOREX(SRC,RX) std.ab SRC, [RX, 8]
# define ZOLSHFT 5
# define ZOLAND 0x1F
#else
-# define PREFETCH_READ(RX) prefetch [RX, 28]
-# define PREFETCH_WRITE(RX) prefetchw [RX, 32]
# define LOADX(DST,RX) ld.ab DST, [RX, 4]
# define STOREX(SRC,RX) st.ab SRC, [RX, 4]
# define ZOLSHFT 4
@@ -41,8 +37,6 @@
#endif
ENTRY_CFI(memcpy)
- prefetch [r1] ; Prefetch the read location
- prefetchw [r0] ; Prefetch the write location
mov.f 0, r2
;;; if size is zero
jz.d [blink]
@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy32_64bytes
;; LOOP START
LOADX (r6, r1)
- PREFETCH_READ (r1)
- PREFETCH_WRITE (r3)
LOADX (r8, r1)
LOADX (r10, r1)
LOADX (r4, r1)
@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_1
;; LOOP START
ld.ab r6, [r1, 4]
- prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
- prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 24)
or r7, r7, r5
@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_2
;; LOOP START
ld.ab r6, [r1, 4]
- prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
- prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 16)
or r7, r7, r5
@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_3
;; LOOP START
ld.ab r6, [r1, 4]
- prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
- prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 8)
or r7, r7, r5
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tom Zanussi <[email protected]>
commit 9f0bbf3115ca9f91f43b7c74e9ac7d79f47fc6c2 upstream.
Because there may be random garbage beyond a string's null terminator,
it's not correct to copy the the complete character array for use as a
hist trigger key. This results in multiple histogram entries for the
'same' string key.
So, in the case of a string key, use strncpy instead of memcpy to
avoid copying in the extra bytes.
Before, using the gdbus entries in the following hist trigger as an
example:
# echo 'hist:key=comm' > /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist
...
{ comm: ImgDecoder #4 } hitcount: 203
{ comm: gmain } hitcount: 213
{ comm: gmain } hitcount: 216
{ comm: StreamTrans #73 } hitcount: 221
{ comm: mozStorage #3 } hitcount: 230
{ comm: gdbus } hitcount: 233
{ comm: StyleThread#5 } hitcount: 253
{ comm: gdbus } hitcount: 256
{ comm: gdbus } hitcount: 260
{ comm: StyleThread#4 } hitcount: 271
...
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
51
After:
# cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l
1
Link: http://lkml.kernel.org/r/50c35ae1267d64eee975b8125e151e600071d4dc.1549309756.git.tom.zanussi@linux.intel.com
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Fixes: 79e577cbce4c4 ("tracing: Support string type key properly")
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events_hist.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -872,9 +872,10 @@ static inline void add_to_key(char *comp
/* ensure NULL-termination */
if (size > key_field->size - 1)
size = key_field->size - 1;
- }
- memcpy(compound_key + key_field->offset, key, size);
+ strncpy(compound_key + key_field->offset, (char *)key, size);
+ } else
+ memcpy(compound_key + key_field->offset, key, size);
}
static void event_hist_trigger(struct event_trigger_data *data, void *rec)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit e7f0c424d0806b05d6f47be9f202b037eb701707 upstream.
Commit d716ff71dd12 ("tracing: Remove taking of trace_types_lock in
pipe files") use the current tracer instead of the copy in
tracing_open_pipe(), but it forget to remove the freeing sentence in
the error path.
There's an error path that can call kfree(iter->trace) after the iter->trace
was assigned to tr->current_trace, which would be bad to free.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: d716ff71dd12 ("tracing: Remove taking of trace_types_lock in pipe files")
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 1 -
1 file changed, 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -5604,7 +5604,6 @@ out:
return ret;
fail:
- kfree(iter->trace);
kfree(iter);
__trace_array_put(tr);
mutex_unlock(&trace_types_lock);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <[email protected]>
commit f16eb8a4b096514ac06fb25bf599dcc792899b3d upstream.
If SSDT overlay is loaded via ConfigFS and then unloaded the device,
we would like to have OF modalias for, already gone. Thus, acpi_get_name()
returns no allocated buffer for such case and kernel crashes afterwards:
ACPI: Host-directed Dynamic ACPI Table Unload
ads7950 spi-PRP0001:00: Dropping the link to regulator.0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96
Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
Workqueue: kacpi_hotplug acpi_device_del_work_fn
RIP: 0010:create_of_modalias.isra.1+0x4c/0x150
Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04
RSP: 0000:ffffa51040297c10 EFLAGS: 00010246
RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000
RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0
RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000
R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218
R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0
Call Trace:
__acpi_device_uevent_modalias+0xb0/0x100
spi_uevent+0xd/0x40
...
In order to fix above let create_of_modalias() check the status returned
by acpi_get_name() and bail out in case of failure.
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381
Reported-by: Ferry Toth <[email protected]>
Tested-by: Ferry Toth<[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Cc: 4.1+ <[email protected]> # 4.1+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/device_sysfs.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -202,11 +202,15 @@ static int create_of_modalias(struct acp
{
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
const union acpi_object *of_compatible, *obj;
+ acpi_status status;
int len, count;
int i, nval;
char *c;
- acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
+ status = acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
/* DT strings are all in lower case */
for (c = buf.pointer; *c != '\0'; c++)
*c = tolower(*c);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit eb5e6730db98fcc4b51148b4a819fa4bf864ae54 upstream.
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because
the crypto_alloc_shash() in alg_test_crc32c() fails. This is because
cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can
only be accessed through the ahash API, unlike shash algorithms which
can be accessed through both the ahash and shash APIs.
As the test is testing the shash descriptor format which is only
applicable to shash algorithms, skip it for ahash algorithms.
(Note that it's still important to fix crypto self-test failures even
for weird algorithm instantiations like cryptd(crc32c) that no one
would really use; in fips_enabled mode unprivileged users can use them
to panic the kernel, and also they prevent treating a crypto self-test
failure as a bug when fuzzing the kernel.)
Fixes: 8e3ee85e68c5 ("crypto: crc32c - Test descriptor context format")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/testmgr.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -1839,14 +1839,21 @@ static int alg_test_crc32c(const struct
err = alg_test_hash(desc, driver, type, mask);
if (err)
- goto out;
+ return err;
tfm = crypto_alloc_shash(driver, type, mask);
if (IS_ERR(tfm)) {
+ if (PTR_ERR(tfm) == -ENOENT) {
+ /*
+ * This crc32c implementation is only available through
+ * ahash API, not the shash API, so the remaining part
+ * of the test is not applicable to it.
+ */
+ return 0;
+ }
printk(KERN_ERR "alg: crc32c: Failed to load transform for %s: "
"%ld\n", driver, PTR_ERR(tfm));
- err = PTR_ERR(tfm);
- goto out;
+ return PTR_ERR(tfm);
}
do {
@@ -1873,7 +1880,6 @@ static int alg_test_crc32c(const struct
crypto_free_shash(tfm);
-out:
return err;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felipe Franciosi <[email protected]>
commit 3722e6a52174d7c3a00e6f5efd006ca093f346c1 upstream.
The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of
device-readable records and a single device-writable response entry:
struct virtio_scsi_ctrl_tmf
{
// Device-readable part
le32 type;
le32 subtype;
u8 lun[8];
le64 id;
// Device-writable part
u8 response;
}
The above should be organised as two descriptor entries (or potentially
more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64
id" or after "u8 response".
The Linux driver doesn't respect that, with virtscsi_abort() and
virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It
results in the original scsi command payload (or writable buffers) added to
the tmf.
This fixes the problem by leaving cmd->sc zeroed out, which makes
virtscsi_kick_cmd() add the tmf to the control vq without any payload.
Cc: [email protected]
Signed-off-by: Felipe Franciosi <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/virtio_scsi.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -638,7 +638,6 @@ static int virtscsi_device_reset(struct
return FAILED;
memset(cmd, 0, sizeof(*cmd));
- cmd->sc = sc;
cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){
.type = VIRTIO_SCSI_T_TMF,
.subtype = cpu_to_virtio32(vscsi->vdev,
@@ -697,7 +696,6 @@ static int virtscsi_abort(struct scsi_cm
return FAILED;
memset(cmd, 0, sizeof(*cmd));
- cmd->sc = sc;
cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){
.type = VIRTIO_SCSI_T_TMF,
.subtype = VIRTIO_SCSI_T_TMF_ABORT_TASK,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 251b7aea34ba3c4d4fdfa9447695642eb8b8b098 upstream.
The memcpy()s in the PCBC implementation use walk->iv as both the source
and destination, which has undefined behavior. These memcpy()'s are
actually unneeded, because walk->iv is already used to hold the previous
plaintext block XOR'd with the previous ciphertext block. Thus,
walk->iv is already updated to its final value.
So remove the broken and unnecessary memcpy()s.
Fixes: 91652be5d1b9 ("[CRYPTO] pcbc: Add Propagated CBC template")
Cc: <[email protected]> # v2.6.21+
Cc: David Howells <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Maxim Zhukov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/pcbc.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
--- a/crypto/pcbc.c
+++ b/crypto/pcbc.c
@@ -50,7 +50,7 @@ static int crypto_pcbc_encrypt_segment(s
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
u8 *dst = walk->dst.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
do {
crypto_xor(iv, src, bsize);
@@ -71,7 +71,7 @@ static int crypto_pcbc_encrypt_inplace(s
int bsize = crypto_cipher_blocksize(tfm);
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
u8 tmpbuf[bsize];
do {
@@ -83,8 +83,6 @@ static int crypto_pcbc_encrypt_inplace(s
src += bsize;
} while ((nbytes -= bsize) >= bsize);
- memcpy(walk->iv, iv, bsize);
-
return nbytes;
}
@@ -120,7 +118,7 @@ static int crypto_pcbc_decrypt_segment(s
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
u8 *dst = walk->dst.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
do {
crypto_cipher_decrypt_one(tfm, dst, src);
@@ -131,8 +129,6 @@ static int crypto_pcbc_decrypt_segment(s
dst += bsize;
} while ((nbytes -= bsize) >= bsize);
- memcpy(walk->iv, iv, bsize);
-
return nbytes;
}
@@ -143,7 +139,7 @@ static int crypto_pcbc_decrypt_inplace(s
int bsize = crypto_cipher_blocksize(tfm);
unsigned int nbytes = walk->nbytes;
u8 *src = walk->src.virt.addr;
- u8 *iv = walk->iv;
+ u8 * const iv = walk->iv;
u8 tmpbuf[bsize] __aligned(__alignof__(u32));
do {
@@ -155,8 +151,6 @@ static int crypto_pcbc_decrypt_inplace(s
src += bsize;
} while ((nbytes -= bsize) >= bsize);
- memcpy(walk->iv, iv, bsize);
-
return nbytes;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zenghui Yu <[email protected]>
commit 8d565748b6035eeda18895c213396a4c9fac6a4c upstream.
In current logic, its_parse_indirect_baser() will be invoked twice
when allocating Device tables. Add a *break* to omit the unnecessary
and annoying (might be ...) invoking.
Fixes: 32bd44dc19de ("irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size")
Cc: [email protected]
Signed-off-by: Zenghui Yu <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/irqchip/irq-gic-v3-its.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1708,6 +1708,8 @@ static int its_alloc_tables(struct its_n
indirect = its_parse_indirect_baser(its, baser,
psz, &order,
its->device_ids);
+ break;
+
case GITS_BASER_TYPE_VCPU:
indirect = its_parse_indirect_baser(its, baser,
psz, &order,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagar Biradar <[email protected]>
commit 0015437cc046e5ec2b57b00ff8312b8d432eac7c upstream.
Fix performance issue where the queue depth for SmartIOC logical volumes is
set to 1, and allow the usual logical volume code to be executed
Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks)
Cc: [email protected]
Signed-off-by: Sagar Biradar <[email protected]>
Reviewed-by: Dave Carroll <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/aacraid/linit.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -413,13 +413,16 @@ static int aac_slave_configure(struct sc
if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && aac->sa_firmware) {
devtype = aac->hba_map[chn][tid].devtype;
- if (devtype == AAC_DEVTYPE_NATIVE_RAW)
+ if (devtype == AAC_DEVTYPE_NATIVE_RAW) {
depth = aac->hba_map[chn][tid].qd_limit;
- else if (devtype == AAC_DEVTYPE_ARC_RAW)
+ set_timeout = 1;
+ goto common_config;
+ }
+ if (devtype == AAC_DEVTYPE_ARC_RAW) {
set_qd_dev_type = true;
-
- set_timeout = 1;
- goto common_config;
+ set_timeout = 1;
+ goto common_config;
+ }
}
if (aac->jbod && (sdev->type == TYPE_DISK))
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <[email protected]>
commit 01bd2ac2f55a1916d81dace12fa8d7ae1c79b5ea upstream.
Commit f7c90c2aa40048 ("x86/xen: don't write ptes directly in 32-bit
PV guests") introduced a regression for booting dom0 on huge systems
with lots of RAM (in the TB range).
Reason is that on those hosts the p2m list needs to be moved early in
the boot process and this requires temporary page tables to be created.
Said commit modified xen_set_pte_init() to use a hypercall for writing
a PTE, but this requires the page table being in the direct mapped
area, which is not the case for the temporary page tables used in
xen_relocate_p2m().
As the page tables are completely written before being linked to the
actual address space instead of set_pte() a plain write to memory can
be used in xen_relocate_p2m().
Fixes: f7c90c2aa40048 ("x86/xen: don't write ptes directly in 32-bit PV guests")
Cc: [email protected]
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/mmu_pv.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -2080,10 +2080,10 @@ void __init xen_relocate_p2m(void)
pt = early_memremap(pt_phys, PAGE_SIZE);
clear_page(pt);
for (idx_pte = 0;
- idx_pte < min(n_pte, PTRS_PER_PTE);
- idx_pte++) {
- set_pte(pt + idx_pte,
- pfn_pte(p2m_pfn, PAGE_KERNEL));
+ idx_pte < min(n_pte, PTRS_PER_PTE);
+ idx_pte++) {
+ pt[idx_pte] = pfn_pte(p2m_pfn,
+ PAGE_KERNEL);
p2m_pfn++;
}
n_pte -= PTRS_PER_PTE;
@@ -2091,8 +2091,7 @@ void __init xen_relocate_p2m(void)
make_lowmem_page_readonly(__va(pt_phys));
pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE,
PFN_DOWN(pt_phys));
- set_pmd(pmd + idx_pt,
- __pmd(_PAGE_TABLE | pt_phys));
+ pmd[idx_pt] = __pmd(_PAGE_TABLE | pt_phys);
pt_phys += PAGE_SIZE;
}
n_pt -= PTRS_PER_PMD;
@@ -2100,7 +2099,7 @@ void __init xen_relocate_p2m(void)
make_lowmem_page_readonly(__va(pmd_phys));
pin_pagetable_pfn(MMUEXT_PIN_L2_TABLE,
PFN_DOWN(pmd_phys));
- set_pud(pud + idx_pmd, __pud(_PAGE_TABLE | pmd_phys));
+ pud[idx_pmd] = __pud(_PAGE_TABLE | pmd_phys);
pmd_phys += PAGE_SIZE;
}
n_pmd -= PTRS_PER_PUD;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn <[email protected]>
commit a0ce2f0aa6ad97c3d4927bf2ca54bcebdf062d55 upstream.
Before this patch, it was possible for two pipes to affect each other after
data had been transferred between them with tee():
============
$ cat tee_test.c
int main(void) {
int pipe_a[2];
if (pipe(pipe_a)) err(1, "pipe");
int pipe_b[2];
if (pipe(pipe_b)) err(1, "pipe");
if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write");
if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee");
if (write(pipe_b[1], "xx", 2) != 2) err(1, "write");
char buf[5];
if (read(pipe_a[0], buf, 4) != 4) err(1, "read");
buf[4] = 0;
printf("got back: '%s'\n", buf);
}
$ gcc -o tee_test tee_test.c
$ ./tee_test
got back: 'abxx'
$
============
As suggested by Al Viro, fix it by creating a separate type for
non-mergeable pipe buffers, then changing the types of buffers in
splice_pipe_to_pipe() and link_pipe().
Cc: <[email protected]>
Fixes: 7c77f0b3f920 ("splice: implement pipe to pipe splicing")
Fixes: 70524490ee2e ("[PATCH] splice: add support for sys_tee()")
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/pipe.c | 14 ++++++++++++++
fs/splice.c | 4 ++++
include/linux/pipe_fs_i.h | 1 +
3 files changed, 19 insertions(+)
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -239,6 +239,14 @@ static const struct pipe_buf_operations
.get = generic_pipe_buf_get,
};
+static const struct pipe_buf_operations anon_pipe_buf_nomerge_ops = {
+ .can_merge = 0,
+ .confirm = generic_pipe_buf_confirm,
+ .release = anon_pipe_buf_release,
+ .steal = anon_pipe_buf_steal,
+ .get = generic_pipe_buf_get,
+};
+
static const struct pipe_buf_operations packet_pipe_buf_ops = {
.can_merge = 0,
.confirm = generic_pipe_buf_confirm,
@@ -247,6 +255,12 @@ static const struct pipe_buf_operations
.get = generic_pipe_buf_get,
};
+void pipe_buf_mark_unmergeable(struct pipe_buffer *buf)
+{
+ if (buf->ops == &anon_pipe_buf_ops)
+ buf->ops = &anon_pipe_buf_nomerge_ops;
+}
+
static ssize_t
pipe_read(struct kiocb *iocb, struct iov_iter *to)
{
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1580,6 +1580,8 @@ retry:
*/
obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
+ pipe_buf_mark_unmergeable(obuf);
+
obuf->len = len;
opipe->nrbufs++;
ibuf->offset += obuf->len;
@@ -1654,6 +1656,8 @@ static int link_pipe(struct pipe_inode_i
*/
obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
+ pipe_buf_mark_unmergeable(obuf);
+
if (obuf->len > len)
obuf->len = len;
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -183,6 +183,7 @@ void generic_pipe_buf_get(struct pipe_in
int generic_pipe_buf_confirm(struct pipe_inode_info *, struct pipe_buffer *);
int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
+void pipe_buf_mark_unmergeable(struct pipe_buffer *buf);
extern const struct pipe_buf_operations nosteal_pipe_buf_ops;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vignesh R <[email protected]>
commit 673c865efbdc5fec3cc525c46d71844d42c60072 upstream.
Commit 4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support") has
has got order of parameter wrong when calling regmap_update_bits() to
select CS for mmap access. Mask and value arguments are interchanged.
Code will work on a system with single slave, but fails when more than
one CS is in use. Fix this by correcting the order of parameters when
calling regmap_update_bits().
Fixes: 4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support")
Cc: [email protected]
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-ti-qspi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -490,8 +490,8 @@ static void ti_qspi_enable_memory_map(st
ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG);
if (qspi->ctrl_base) {
regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
- MEM_CS_EN(spi->chip_select),
- MEM_CS_MASK);
+ MEM_CS_MASK,
+ MEM_CS_EN(spi->chip_select));
}
qspi->mmap_enabled = true;
}
@@ -503,7 +503,7 @@ static void ti_qspi_disable_memory_map(s
ti_qspi_write(qspi, 0, QSPI_SPI_SWITCH_REG);
if (qspi->ctrl_base)
regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
- 0, MEM_CS_MASK);
+ MEM_CS_MASK, 0);
qspi->mmap_enabled = false;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit eaf46edf6ea89675bd36245369c8de5063a0272c upstream.
The NEON MAC calculation routine fails to handle the case correctly
where there is some data in the buffer, and the input fills it up
exactly. In this case, we enter the loop at the end with w8 == 0,
while a negative value is assumed, and so the loop carries on until
the increment of the 32-bit counter wraps around, which is quite
obviously wrong.
So omit the loop altogether in this case, and exit right away.
Reported-by: Eric Biggers <[email protected]>
Fixes: a3fd82105b9d1 ("arm64/crypto: AES in CCM mode using ARMv8 Crypto ...")
Cc: [email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/crypto/aes-ce-ccm-core.S | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/arm64/crypto/aes-ce-ccm-core.S
+++ b/arch/arm64/crypto/aes-ce-ccm-core.S
@@ -74,12 +74,13 @@ ENTRY(ce_aes_ccm_auth_data)
beq 10f
ext v0.16b, v0.16b, v0.16b, #1 /* rotate out the mac bytes */
b 7b
-8: mov w7, w8
+8: cbz w8, 91f
+ mov w7, w8
add w8, w8, #16
9: ext v1.16b, v1.16b, v1.16b, #1
adds w7, w7, #1
bne 9b
- eor v0.16b, v0.16b, v1.16b
+91: eor v0.16b, v0.16b, v1.16b
st1 {v0.16b}, [x0]
10: str w8, [x3]
ret
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Finn Thain <[email protected]>
commit 28713169d879b67be2ef2f84dcf54905de238294 upstream.
This patch fixes a build failure when using GCC 8.1:
/usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock':
block/partitions/ldm.c:153: undefined reference to `strcmp'
This is caused by a new optimization which effectively replaces a
strncmp() call with a strcmp() call. This affects a number of strncmp()
call sites in the kernel.
The entire class of optimizations is avoided with -fno-builtin, which
gets enabled by -ffreestanding. This may avoid possible future build
failures in case new optimizations appear in future compilers.
I haven't done any performance measurements with this patch but I did
count the function calls in a defconfig build. For example, there are now
23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the
other libc functions is smaller.
If this harms performance we can tackle that regression by optimizing
the call sites, ideally using semantic patches. That way, clang and ICC
builds might benfit too.
Cc: [email protected]
Reference: https://marc.info/?l=linux-m68k&m=154514816222244&w=2
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/m68k/Makefile | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -58,7 +58,10 @@ cpuflags-$(CONFIG_M5206e) := $(call cc-o
cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
KBUILD_AFLAGS += $(cpuflags-y)
-KBUILD_CFLAGS += $(cpuflags-y) -pipe
+KBUILD_CFLAGS += $(cpuflags-y)
+
+KBUILD_CFLAGS += -pipe -ffreestanding
+
ifdef CONFIG_MMU
# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Shilovsky <[email protected]>
commit 7b9b9edb49ad377b1e06abf14354c227e9ac4b06 upstream.
Currently on lease break the client sets a caching level twice:
when oplock is detected and when oplock is processed. While the
1st attempt sets the level to the value provided by the server,
the 2nd one resets the level to None unconditionally.
This happens because the oplock/lease processing code was changed
to avoid races between page cache flushes and oplock breaks.
The commit c11f1df5003d534 ("cifs: Wait for writebacks to complete
before attempting write.") fixed the races for oplocks but didn't
apply the same changes for leases resulting in overwriting the
server granted value to None. Fix this by properly processing
lease breaks.
Signed-off-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2misc.c | 17 ++++++++++++++---
fs/cifs/smb2ops.c | 15 ++++++++++++---
2 files changed, 26 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -479,7 +479,6 @@ smb2_tcon_has_lease(struct cifs_tcon *tc
__u8 lease_state;
struct list_head *tmp;
struct cifsFileInfo *cfile;
- struct TCP_Server_Info *server = tcon->ses->server;
struct cifs_pending_open *open;
struct cifsInodeInfo *cinode;
int ack_req = le32_to_cpu(rsp->Flags &
@@ -499,13 +498,25 @@ smb2_tcon_has_lease(struct cifs_tcon *tc
cifs_dbg(FYI, "lease key match, lease break 0x%x\n",
le32_to_cpu(rsp->NewLeaseState));
- server->ops->set_oplock_level(cinode, lease_state, 0, NULL);
-
if (ack_req)
cfile->oplock_break_cancelled = false;
else
cfile->oplock_break_cancelled = true;
+ set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cinode->flags);
+
+ /*
+ * Set or clear flags depending on the lease state being READ.
+ * HANDLE caching flag should be added when the client starts
+ * to defer closing remote file handles with HANDLE leases.
+ */
+ if (lease_state & SMB2_LEASE_READ_CACHING_HE)
+ set_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
+ &cinode->flags);
+ else
+ clear_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
+ &cinode->flags);
+
queue_work(cifsoplockd_wq, &cfile->oplock_break);
kfree(lw);
return true;
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1933,6 +1933,15 @@ smb2_downgrade_oplock(struct TCP_Server_
}
static void
+smb21_downgrade_oplock(struct TCP_Server_Info *server,
+ struct cifsInodeInfo *cinode, bool set_level2)
+{
+ server->ops->set_oplock_level(cinode,
+ set_level2 ? SMB2_LEASE_READ_CACHING_HE :
+ 0, 0, NULL);
+}
+
+static void
smb2_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,
unsigned int epoch, bool *purge_cache)
{
@@ -2917,7 +2926,7 @@ struct smb_version_operations smb21_oper
.print_stats = smb2_print_stats,
.is_oplock_break = smb2_is_valid_oplock_break,
.handle_cancelled_mid = smb2_handle_cancelled_mid,
- .downgrade_oplock = smb2_downgrade_oplock,
+ .downgrade_oplock = smb21_downgrade_oplock,
.need_neg = smb2_need_neg,
.negotiate = smb2_negotiate,
.negotiate_wsize = smb2_negotiate_wsize,
@@ -3012,7 +3021,7 @@ struct smb_version_operations smb30_oper
.dump_share_caps = smb2_dump_share_caps,
.is_oplock_break = smb2_is_valid_oplock_break,
.handle_cancelled_mid = smb2_handle_cancelled_mid,
- .downgrade_oplock = smb2_downgrade_oplock,
+ .downgrade_oplock = smb21_downgrade_oplock,
.need_neg = smb2_need_neg,
.negotiate = smb2_negotiate,
.negotiate_wsize = smb2_negotiate_wsize,
@@ -3117,7 +3126,7 @@ struct smb_version_operations smb311_ope
.dump_share_caps = smb2_dump_share_caps,
.is_oplock_break = smb2_is_valid_oplock_break,
.handle_cancelled_mid = smb2_handle_cancelled_mid,
- .downgrade_oplock = smb2_downgrade_oplock,
+ .downgrade_oplock = smb21_downgrade_oplock,
.need_neg = smb2_need_neg,
.negotiate = smb2_negotiate,
.negotiate_wsize = smb2_negotiate_wsize,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heikki Krogerus <[email protected]>
commit 2b6e492467c78183bb629bb0a100ea3509b615a5 upstream.
With string type property entries we need to use
sizeof(const char *) instead of the number of characters as
the length of the entry.
If the string was shorter then sizeof(const char *),
attempts to read it would have failed with -EOVERFLOW. The
problem has been hidden because all build-in string
properties have had a string longer then 8 characters until
now.
Fixes: a85f42047533 ("device property: helper macros for property entry creation")
Cc: 4.5+ <[email protected]> # 4.5+
Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/property.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -252,7 +252,7 @@ struct property_entry {
#define PROPERTY_ENTRY_STRING(_name_, _val_) \
(struct property_entry) { \
.name = _name_, \
- .length = sizeof(_val_), \
+ .length = sizeof(const char *), \
.is_string = true, \
{ .value = { .str = _val_ } }, \
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit 62fecf295e3c48be1b5f17c440b93875b9adb4d6 upstream.
The SIMD routine ported from x86 used to have a special code path
for inputs < 16 bytes, which got lost somewhere along the way.
Instead, the current glue code aligns the input pointer to permit
the NEON routine to use special versions of the vld1 instructions
that assume 16 byte alignment, but this could result in inputs of
less than 16 bytes to be passed in. This not only fails the new
extended tests that Eric has implemented, it also results in the
code reading past the end of the input, which could potentially
result in crashes when dealing with less than 16 bytes of input
at the end of a page which is followed by an unmapped page.
So update the glue code to only invoke the NEON routine if the
input is at least 16 bytes.
Reported-by: Eric Biggers <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Fixes: 1d481f1cd892 ("crypto: arm/crct10dif - port x86 SSE implementation to ARM")
Cc: <[email protected]> # v4.10+
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/crypto/crct10dif-ce-core.S | 14 +++++++-------
arch/arm/crypto/crct10dif-ce-glue.c | 23 ++++++-----------------
2 files changed, 13 insertions(+), 24 deletions(-)
--- a/arch/arm/crypto/crct10dif-ce-core.S
+++ b/arch/arm/crypto/crct10dif-ce-core.S
@@ -124,10 +124,10 @@ ENTRY(crc_t10dif_pmull)
vext.8 q10, qzr, q0, #4
// receive the initial 64B data, xor the initial crc value
- vld1.64 {q0-q1}, [arg2, :128]!
- vld1.64 {q2-q3}, [arg2, :128]!
- vld1.64 {q4-q5}, [arg2, :128]!
- vld1.64 {q6-q7}, [arg2, :128]!
+ vld1.64 {q0-q1}, [arg2]!
+ vld1.64 {q2-q3}, [arg2]!
+ vld1.64 {q4-q5}, [arg2]!
+ vld1.64 {q6-q7}, [arg2]!
CPU_LE( vrev64.8 q0, q0 )
CPU_LE( vrev64.8 q1, q1 )
CPU_LE( vrev64.8 q2, q2 )
@@ -167,7 +167,7 @@ CPU_LE( vrev64.8 q7, q7 )
_fold_64_B_loop:
.macro fold64, reg1, reg2
- vld1.64 {q11-q12}, [arg2, :128]!
+ vld1.64 {q11-q12}, [arg2]!
vmull.p64 q8, \reg1\()h, d21
vmull.p64 \reg1, \reg1\()l, d20
@@ -238,7 +238,7 @@ _16B_reduction_loop:
vmull.p64 q7, d15, d21
veor.8 q7, q7, q8
- vld1.64 {q0}, [arg2, :128]!
+ vld1.64 {q0}, [arg2]!
CPU_LE( vrev64.8 q0, q0 )
vswp d0, d1
veor.8 q7, q7, q0
@@ -335,7 +335,7 @@ _less_than_128:
vmov.i8 q0, #0
vmov s3, arg1_low32 // get the initial crc value
- vld1.64 {q7}, [arg2, :128]!
+ vld1.64 {q7}, [arg2]!
CPU_LE( vrev64.8 q7, q7 )
vswp d14, d15
veor.8 q7, q7, q0
--- a/arch/arm/crypto/crct10dif-ce-glue.c
+++ b/arch/arm/crypto/crct10dif-ce-glue.c
@@ -35,26 +35,15 @@ static int crct10dif_update(struct shash
unsigned int length)
{
u16 *crc = shash_desc_ctx(desc);
- unsigned int l;
- if (!may_use_simd()) {
- *crc = crc_t10dif_generic(*crc, data, length);
+ if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && may_use_simd()) {
+ kernel_neon_begin();
+ *crc = crc_t10dif_pmull(*crc, data, length);
+ kernel_neon_end();
} else {
- if (unlikely((u32)data % CRC_T10DIF_PMULL_CHUNK_SIZE)) {
- l = min_t(u32, length, CRC_T10DIF_PMULL_CHUNK_SIZE -
- ((u32)data % CRC_T10DIF_PMULL_CHUNK_SIZE));
-
- *crc = crc_t10dif_generic(*crc, data, l);
-
- length -= l;
- data += l;
- }
- if (length > 0) {
- kernel_neon_begin();
- *crc = crc_t10dif_pmull(*crc, data, length);
- kernel_neon_end();
- }
+ *crc = crc_t10dif_generic(*crc, data, length);
}
+
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit 969e2f59d589c15f6aaf306e590dde16f12ea4b3 upstream.
Commit 5092fcf34908 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic
fallback") introduced C fallback code to replace the NEON routines
when invoked from a context where the NEON is not available (i.e.,
from the context of a softirq taken while the NEON is already being
used in kernel process context)
Fix two logical flaws in the MAC calculation of the associated data.
Reported-by: Eric Biggers <[email protected]>
Fixes: 5092fcf34908 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback")
Cc: [email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/crypto/aes-ce-ccm-glue.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/arch/arm64/crypto/aes-ce-ccm-glue.c
+++ b/arch/arm64/crypto/aes-ce-ccm-glue.c
@@ -123,7 +123,7 @@ static void ccm_update_mac(struct crypto
abytes -= added;
}
- while (abytes > AES_BLOCK_SIZE) {
+ while (abytes >= AES_BLOCK_SIZE) {
__aes_arm64_encrypt(key->key_enc, mac, mac,
num_rounds(key));
crypto_xor(mac, in, AES_BLOCK_SIZE);
@@ -137,8 +137,6 @@ static void ccm_update_mac(struct crypto
num_rounds(key));
crypto_xor(mac, in, abytes);
*macp = abytes;
- } else {
- *macp = 0;
}
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: QiaoChong <[email protected]>
commit 21698fd57984cd28207d841dbdaa026d6061bceb upstream.
In the original code before 181bf1e815a2 the loop was continuing until
it finds the first matching superios[i].io and p->base.
But after 181bf1e815a2 the logic changed and the loop now returns the
pointer to the first mismatched array element which is then used in
get_superio_dma() and get_superio_irq() and thus returning the wrong
value.
Fix the condition so that it now returns the correct pointer.
Fixes: 181bf1e815a2 ("parport_pc: clean up the modified while loops using for")
Cc: Alan Cox <[email protected]>
Cc: [email protected]
Signed-off-by: QiaoChong <[email protected]>
[rewrite the commit message]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/parport/parport_pc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1377,7 +1377,7 @@ static struct superio_struct *find_super
{
int i;
for (i = 0; i < NR_SUPERIOS; i++)
- if (superios[i].io != p->base)
+ if (superios[i].io == p->base)
return &superios[i];
return NULL;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 12455e320e19e9cc7ad97f4ab89c280fe297387c upstream.
The arm64 NEON bit-sliced implementation of AES-CTR fails the improved
skcipher tests because it sometimes produces the wrong ciphertext. The
bug is that the final keystream block isn't returned from the assembly
code when the number of non-final blocks is zero. This can happen if
the input data ends a few bytes after a page boundary. In this case the
last bytes get "encrypted" by XOR'ing them with uninitialized memory.
Fix the assembly code to return the final keystream block when needed.
Fixes: 88a3f582bea9 ("crypto: arm64/aes - don't use IV buffer to return final keystream block")
Cc: <[email protected]> # v4.11+
Reviewed-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/crypto/aes-neonbs-core.S | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/arm64/crypto/aes-neonbs-core.S
+++ b/arch/arm64/crypto/aes-neonbs-core.S
@@ -940,7 +940,7 @@ CPU_LE( rev x8, x8 )
8: next_ctr v0
cbnz x4, 99b
-0: st1 {v0.16b}, [x5]
+ st1 {v0.16b}, [x5]
ldp x29, x30, [sp], #16
ret
@@ -948,6 +948,9 @@ CPU_LE( rev x8, x8 )
* If we are handling the tail of the input (x6 != NULL), return the
* final keystream block back to the caller.
*/
+0: cbz x6, 8b
+ st1 {v0.16b}, [x6]
+ b 8b
1: cbz x6, 8b
st1 {v1.16b}, [x6]
b 8b
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sowjanya Komatineni <[email protected]>
commit f4e3f4ae1d9c9330de355f432b69952e8cef650c upstream.
Tegra186 and prior supports maximum 4K bytes per packet transfer
including 12 bytes of packet header.
This patch fixes max write length limit to account packet header
size for transfers.
Cc: [email protected] # 4.4+
Reviewed-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -794,7 +794,7 @@ static const struct i2c_algorithm tegra_
/* payload size is only 12 bit */
static const struct i2c_adapter_quirks tegra_i2c_quirks = {
.max_read_len = 4096,
- .max_write_len = 4096,
+ .max_write_len = 4096 - 12,
};
static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin K. Petersen <[email protected]>
commit a83da8a4509d3ebfe03bb7fffce022e4d5d4764f upstream.
It was reported that some devices report an OPTIMAL TRANSFER LENGTH of
0xFFFF blocks. That looks bogus, especially for a device with a
4096-byte physical block size.
Ignore OPTIMAL TRANSFER LENGTH if it is not a multiple of the device's
reported physical block size.
To make the sanity checking conditionals more readable--and to
facilitate printing warnings--relocate the checking to a helper
function. No functional change aside from the printks.
Cc: <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199759
Reported-by: Christoph Anton Mitterer <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 59 +++++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 50 insertions(+), 9 deletions(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3077,6 +3077,55 @@ static void sd_read_security(struct scsi
sdkp->security = 1;
}
+/*
+ * Determine the device's preferred I/O size for reads and writes
+ * unless the reported value is unreasonably small, large, not a
+ * multiple of the physical block size, or simply garbage.
+ */
+static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp,
+ unsigned int dev_max)
+{
+ struct scsi_device *sdp = sdkp->device;
+ unsigned int opt_xfer_bytes =
+ logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
+
+ if (sdkp->opt_xfer_blocks > dev_max) {
+ sd_first_printk(KERN_WARNING, sdkp,
+ "Optimal transfer size %u logical blocks " \
+ "> dev_max (%u logical blocks)\n",
+ sdkp->opt_xfer_blocks, dev_max);
+ return false;
+ }
+
+ if (sdkp->opt_xfer_blocks > SD_DEF_XFER_BLOCKS) {
+ sd_first_printk(KERN_WARNING, sdkp,
+ "Optimal transfer size %u logical blocks " \
+ "> sd driver limit (%u logical blocks)\n",
+ sdkp->opt_xfer_blocks, SD_DEF_XFER_BLOCKS);
+ return false;
+ }
+
+ if (opt_xfer_bytes < PAGE_SIZE) {
+ sd_first_printk(KERN_WARNING, sdkp,
+ "Optimal transfer size %u bytes < " \
+ "PAGE_SIZE (%u bytes)\n",
+ opt_xfer_bytes, (unsigned int)PAGE_SIZE);
+ return false;
+ }
+
+ if (opt_xfer_bytes & (sdkp->physical_block_size - 1)) {
+ sd_first_printk(KERN_WARNING, sdkp,
+ "Optimal transfer size %u bytes not a " \
+ "multiple of physical block size (%u bytes)\n",
+ opt_xfer_bytes, sdkp->physical_block_size);
+ return false;
+ }
+
+ sd_first_printk(KERN_INFO, sdkp, "Optimal transfer size %u bytes\n",
+ opt_xfer_bytes);
+ return true;
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -3146,15 +3195,7 @@ static int sd_revalidate_disk(struct gen
dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
- /*
- * Determine the device's preferred I/O size for reads and writes
- * unless the reported value is unreasonably small, large, or
- * garbage.
- */
- if (sdkp->opt_xfer_blocks &&
- sdkp->opt_xfer_blocks <= dev_max &&
- sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
- logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) {
+ if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
} else
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anssi Hannula <[email protected]>
commit 7abab1605139bc41442864c18f9573440f7ca105 upstream.
If RX is disabled while there are still unprocessed bytes in RX FIFO,
cdns_uart_handle_rx() called from interrupt handler will get stuck in
the receive loop as read bytes will not get removed from the RX FIFO
and CDNS_UART_SR_RXEMPTY bit will never get set.
Avoid the stuck handler by checking first if RX is disabled. port->lock
protects against race with RX-disabling functions.
This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty:
xuartps: Fix RX hang, and TX corruption in termios call") which fixed a
similar issue in cdns_uart_set_termios().
The behavior can also be easily verified by e.g. setting
CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the
following loop will then get stuck.
Resetting the FIFO using RXRST would not set RXEMPTY either so simply
issuing a reset after RX-disable would not work.
I observe this frequently on a ZynqMP board during heavy RX load at 1M
baudrate when the reader process exits and thus RX gets disabled.
Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART")
Signed-off-by: Anssi Hannula <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -366,7 +366,13 @@ static irqreturn_t cdns_uart_isr(int irq
cdns_uart_handle_tx(dev_id);
isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
}
- if (isrstatus & CDNS_UART_IXR_RXMASK)
+
+ /*
+ * Skip RX processing if RX is disabled as RXEMPTY will never be set
+ * as read bytes will not be removed from the FIFO.
+ */
+ if (isrstatus & CDNS_UART_IXR_RXMASK &&
+ !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
cdns_uart_handle_rx(dev_id, isrstatus);
spin_unlock(&port->lock);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 1c2d14212b15a60300a2d4f6364753e87394c521 upstream.
When ext2 filesystem is created with 64k block size, ext2_max_size()
will return value less than 0. Also, we cannot write any file in this fs
since the sb->maxbytes is less than 0. The core of the problem is that
the size of block index tree for such large block size is more than
i_blocks can carry. So fix the computation to count with this
possibility.
File size limits computed with the new function for the full range of
possible block sizes look like:
bits file_size
10 17247252480
11 275415851008
12 2196873666560
13 2197948973056
14 2198486220800
15 2198754754560
16 2198888906752
CC: [email protected]
Reported-by: yangerkun <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext2/super.c | 41 ++++++++++++++++++++++++++---------------
1 file changed, 26 insertions(+), 15 deletions(-)
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -754,7 +754,8 @@ static loff_t ext2_max_size(int bits)
{
loff_t res = EXT2_NDIR_BLOCKS;
int meta_blocks;
- loff_t upper_limit;
+ unsigned int upper_limit;
+ unsigned int ppb = 1 << (bits-2);
/* This is calculated to be the largest file size for a
* dense, file such that the total number of
@@ -768,24 +769,34 @@ static loff_t ext2_max_size(int bits)
/* total blocks in file system block size */
upper_limit >>= (bits - 9);
-
- /* indirect blocks */
- meta_blocks = 1;
- /* double indirect blocks */
- meta_blocks += 1 + (1LL << (bits-2));
- /* tripple indirect blocks */
- meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2)));
-
- upper_limit -= meta_blocks;
- upper_limit <<= bits;
-
+ /* Compute how many blocks we can address by block tree */
res += 1LL << (bits-2);
res += 1LL << (2*(bits-2));
res += 1LL << (3*(bits-2));
+ /* Does block tree limit file size? */
+ if (res < upper_limit)
+ goto check_lfs;
+
+ res = upper_limit;
+ /* How many metadata blocks are needed for addressing upper_limit? */
+ upper_limit -= EXT2_NDIR_BLOCKS;
+ /* indirect blocks */
+ meta_blocks = 1;
+ upper_limit -= ppb;
+ /* double indirect blocks */
+ if (upper_limit < ppb * ppb) {
+ meta_blocks += 1 + DIV_ROUND_UP(upper_limit, ppb);
+ res -= meta_blocks;
+ goto check_lfs;
+ }
+ meta_blocks += 1 + ppb;
+ upper_limit -= ppb * ppb;
+ /* tripple indirect blocks for the rest */
+ meta_blocks += 1 + DIV_ROUND_UP(upper_limit, ppb) +
+ DIV_ROUND_UP(upper_limit, ppb*ppb);
+ res -= meta_blocks;
+check_lfs:
res <<= bits;
- if (res > upper_limit)
- res = upper_limit;
-
if (res > MAX_LFS_FILESIZE)
res = MAX_LFS_FILESIZE;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream.
When using SCSI passthrough in combination with the iSCSI target driver
then cmd->t_state_lock may be obtained from interrupt context. Hence, all
code that obtains cmd->t_state_lock from thread context must disable
interrupts first. This patch avoids that lockdep reports the following:
WARNING: inconsistent lock state
4.18.0-dbg+ #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes:
000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod]
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xd2/0x260
_raw_spin_lock+0x32/0x50
iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod]
iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod]
iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod]
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
irq event stamp: 1281
hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160
hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0
softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0
softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&cmd->t_state_lock)->rlock);
<Interrupt>
lock(&(&cmd->t_state_lock)->rlock);
---
drivers/target/iscsi/iscsi_target.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4077,9 +4077,9 @@ static void iscsit_release_commands_from
struct se_cmd *se_cmd = &cmd->se_cmd;
if (se_cmd->se_tfo != NULL) {
- spin_lock(&se_cmd->t_state_lock);
+ spin_lock_irq(&se_cmd->t_state_lock);
se_cmd->transport_state |= CMD_T_FABRIC_STOP;
- spin_unlock(&se_cmd->t_state_lock);
+ spin_unlock_irq(&se_cmd->t_state_lock);
}
}
spin_unlock_bh(&conn->cmd_lock);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunihiko Hayashi <[email protected]>
commit 521282237b9d78b9bff423ec818becd4c95841c2 upstream.
Need to set the update bit in UNIPHIER_CLK_CPUGEAR_UPD to update
the CPU-gear value.
Fixes: d08f1f0d596c ("clk: uniphier: add CPU-gear change (cpufreq) support")
Cc: [email protected]
Signed-off-by: Kunihiko Hayashi <[email protected]>
Acked-by: Masahiro Yamada <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/uniphier/clk-uniphier-cpugear.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/uniphier/clk-uniphier-cpugear.c
+++ b/drivers/clk/uniphier/clk-uniphier-cpugear.c
@@ -47,7 +47,7 @@ static int uniphier_clk_cpugear_set_pare
return ret;
ret = regmap_write_bits(gear->regmap,
- gear->regbase + UNIPHIER_CLK_CPUGEAR_SET,
+ gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
UNIPHIER_CLK_CPUGEAR_UPD_BIT,
UNIPHIER_CLK_CPUGEAR_UPD_BIT);
if (ret)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yangtao Li <[email protected]>
commit 446fae2bb5395f3028d8e3aae1508737e5a72ea1 upstream.
of_cpu_device_node_get() will increase the refcount of device_node,
it is necessary to call of_node_put() at the end to release the
refcount.
Fixes: 9eb15dbbfa1a2 ("cpufreq: Add cpufreq driver for Tegra124")
Cc: <[email protected]> # 4.4+
Signed-off-by: Yangtao Li <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/tegra124-cpufreq.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/cpufreq/tegra124-cpufreq.c
+++ b/drivers/cpufreq/tegra124-cpufreq.c
@@ -134,6 +134,8 @@ static int tegra124_cpufreq_probe(struct
platform_set_drvdata(pdev, priv);
+ of_node_put(np);
+
return 0;
out_switch_to_pllx:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <[email protected]>
commit 7ca4c922aad2e3c46767a12f80d01c6b25337b59 upstream.
The 'div' field does not represent a number of bits used to divide
(understand: right-shift) the divider, but a number itself used to
divide the divider.
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Maarten ter Huurne <[email protected]>
Cc: <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/ingenic/cgu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -78,7 +78,7 @@ struct ingenic_cgu_mux_info {
* @reg: offset of the divider control register within the CGU
* @shift: number of bits to left shift the divide value by (ie. the index of
* the lowest bit of the divide value within its control register)
- * @div: number of bits to divide the divider value by (i.e. if the
+ * @div: number to divide the divider value by (i.e. if the
* effective divider value is the value written to the register
* multiplied by some constant)
* @bits: the size of the divide value in bits
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Osipenko <[email protected]>
commit 563b9372f7ec57e44e8f9a8600c5107d7ffdd166 upstream.
The ChipIdea's platform device need to be unregistered on Tegra's driver
module removal.
Fixes: dfebb5f43a78827a ("usb: chipidea: Add support for Tegra20/30/114/124")
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Peter Chen <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/ci_hdrc_tegra.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/chipidea/ci_hdrc_tegra.c
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
@@ -133,6 +133,7 @@ static int tegra_udc_remove(struct platf
{
struct tegra_udc *udc = platform_get_drvdata(pdev);
+ ci_hdrc_remove_device(udc->dev);
usb_phy_set_suspend(udc->phy, 1);
clk_disable_unprepare(udc->clk);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhongjiang <[email protected]>
commit 46612b751c4941c5c0472ddf04027e877ae5990f upstream.
When soft_offline_in_use_page() runs on a thp tail page after pmd is
split, we trigger the following VM_BUG_ON_PAGE():
Memory failure: 0x3755ff: non anonymous thp
__get_any_page: 0x3755ff: unknown zero refcount page type 2fffff80000000
Soft offlining pfn 0x34d805 at process virtual address 0x20fff000
page:ffffea000d360140 count:0 mapcount:0 mapping:0000000000000000 index:0x1
flags: 0x2fffff80000000()
raw: 002fffff80000000 ffffea000d360108 ffffea000d360188 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at ./include/linux/mm.h:519!
soft_offline_in_use_page() passed refcount and page lock from tail page
to head page, which is not needed because we can pass any subpage to
split_huge_page().
Naoya had fixed a similar issue in c3901e722b29 ("mm: hwpoison: fix thp
split handling in memory_failure()"). But he missed fixing soft
offline.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 61f5d698cc97 ("mm: re-enable THP")
Signed-off-by: zhongjiang <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: <[email protected]> [4.5+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory-failure.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1701,19 +1701,17 @@ static int soft_offline_in_use_page(stru
struct page *hpage = compound_head(page);
if (!PageHuge(page) && PageTransHuge(hpage)) {
- lock_page(hpage);
- if (!PageAnon(hpage) || unlikely(split_huge_page(hpage))) {
- unlock_page(hpage);
- if (!PageAnon(hpage))
+ lock_page(page);
+ if (!PageAnon(page) || unlikely(split_huge_page(page))) {
+ unlock_page(page);
+ if (!PageAnon(page))
pr_info("soft offline: %#lx: non anonymous thp\n", page_to_pfn(page));
else
pr_info("soft offline: %#lx: thp split failed\n", page_to_pfn(page));
- put_hwpoison_page(hpage);
+ put_hwpoison_page(page);
return -EBUSY;
}
- unlock_page(hpage);
- get_hwpoison_page(page);
- put_hwpoison_page(hpage);
+ unlock_page(page);
}
if (PageHuge(page))
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <[email protected]>
commit 9ed3f22223c33347ed963e7c7019cf2956dd4e37 upstream.
When an output port driver is removed, also remove references to it from
any masters. Failing to do this causes a NULL ptr dereference when
configuring another output port:
> BUG: unable to handle kernel NULL pointer dereference at 000000000000000d
> RIP: 0010:master_attr_store+0x9d/0x160 [intel_th_gth]
> Call Trace:
> dev_attr_store+0x1b/0x30
> sysfs_kf_write+0x3c/0x50
> kernfs_fop_write+0x125/0x1a0
> __vfs_write+0x3a/0x190
> ? __vfs_write+0x5/0x190
> ? _cond_resched+0x1a/0x50
> ? rcu_all_qs+0x5/0xb0
> ? __vfs_write+0x5/0x190
> vfs_write+0xb8/0x1b0
> ksys_write+0x55/0xc0
> __x64_sys_write+0x1a/0x20
> do_syscall_64+0x5a/0x140
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: b27a6a3f97b9 ("intel_th: Add Global Trace Hub driver")
CC: [email protected] # v4.4+
Reported-by: Ammy Yi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/gth.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -615,6 +615,7 @@ static void intel_th_gth_unassign(struct
{
struct gth_device *gth = dev_get_drvdata(&thdev->dev);
int port = othdev->output.port;
+ int master;
if (thdev->host_mode)
return;
@@ -623,6 +624,9 @@ static void intel_th_gth_unassign(struct
othdev->output.port = -1;
othdev->output.active = false;
gth->output[port].output = NULL;
+ for (master = 0; master < TH_CONFIGURABLE_MASTERS; master++)
+ if (gth->master[master] == port)
+ gth->master[master] = -1;
spin_unlock(>h->gth_lock);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Thumshirn <[email protected]>
commit 349ae63f40638a28c6fce52e8447c2d14b84cc0c upstream.
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes: e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading")
CC: [email protected] # 4.4+
Reviewed-by: Qu Wenruo <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/volumes.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -6420,10 +6420,10 @@ static int btrfs_check_chunk_valid(struc
}
if ((type & BTRFS_BLOCK_GROUP_RAID10 && sub_stripes != 2) ||
- (type & BTRFS_BLOCK_GROUP_RAID1 && num_stripes < 1) ||
+ (type & BTRFS_BLOCK_GROUP_RAID1 && num_stripes != 2) ||
(type & BTRFS_BLOCK_GROUP_RAID5 && num_stripes < 2) ||
(type & BTRFS_BLOCK_GROUP_RAID6 && num_stripes < 3) ||
- (type & BTRFS_BLOCK_GROUP_DUP && num_stripes > 2) ||
+ (type & BTRFS_BLOCK_GROUP_DUP && num_stripes != 2) ||
((type & BTRFS_BLOCK_GROUP_PROFILE_MASK) == 0 &&
num_stripes != 1)) {
btrfs_err(fs_info,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Martin <[email protected]>
commit c88b093693ccbe41991ef2e9b1d251945e6e54ed upstream.
Due to what looks like a typo dating back to the original addition
of FPEXC32_EL2 handling, KVM currently initialises this register to
an architecturally invalid value.
As a result, the VECITR field (RES1) in bits [10:8] is initialised
with 0, and the two reserved (RES0) bits [6:5] are initialised with
1. (In the Common VFP Subarchitecture as specified by ARMv7-A,
these two bits were IMP DEF. ARMv8-A removes them.)
This patch changes the reset value from 0x70 to 0x700, which
reflects the architectural constraints and is presumably what was
originally intended.
Cc: <[email protected]> # 4.12.x-
Cc: Christoffer Dall <[email protected]>
Fixes: 62a89c44954f ("arm64: KVM: 32bit handling of coprocessor traps")
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kvm/sys_regs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1079,7 +1079,7 @@ static const struct sys_reg_desc sys_reg
{ SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 },
{ SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 },
- { SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x70 },
+ { SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x700 },
};
static bool trap_dbgidr(struct kvm_vcpu *vcpu,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ca22f32a6296cbfa29de56328c8505560a18cfa8 ]
Legacy behaviour was to allow non-page-aligned mmap requests, as does the
linux mmap(2) implementation by virtue of automatically rounding up for
the caller.
To avoid breaking legacy userspace relax the newly introduced fix.
Signed-off-by: Tvrtko Ursulin <[email protected]>
Fixes: 5c4604e757ba ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set")
Reported-by: Guenter Roeck <[email protected]>
Cc: Adam Zabrocki <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: <[email protected]> # v4.0+
Cc: Akash Goel <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: [email protected]
Reviewed-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a90e1948efb648f567444f87f3c19b2a0787affd)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/i915_gem.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1640,7 +1640,8 @@ __vma_matches(struct vm_area_struct *vma
if (vma->vm_file != filp)
return false;
- return vma->vm_start == addr && (vma->vm_end - vma->vm_start) == size;
+ return vma->vm_start == addr &&
+ (vma->vm_end - vma->vm_start) == PAGE_ALIGN(size);
}
/**
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit e2477233145f2156434afb799583bccd878f3e9f upstream.
Fix boolean expressions by using logical AND operator '&&' instead of
bitwise operator '&'.
This issue was detected with the help of Coccinelle.
Fixes: 4fa084af28ca ("ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
[krzk: Fix -Wparentheses warning]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-s3c24xx/mach-osiris-dvs.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -70,16 +70,16 @@ static int osiris_dvs_notify(struct noti
switch (val) {
case CPUFREQ_PRECHANGE:
- if (old_dvs & !new_dvs ||
- cur_dvs & !new_dvs) {
+ if ((old_dvs && !new_dvs) ||
+ (cur_dvs && !new_dvs)) {
pr_debug("%s: exiting dvs\n", __func__);
cur_dvs = false;
gpio_set_value(OSIRIS_GPIO_DVS, 1);
}
break;
case CPUFREQ_POSTCHANGE:
- if (!old_dvs & new_dvs ||
- !cur_dvs & new_dvs) {
+ if ((!old_dvs && new_dvs) ||
+ (!cur_dvs && new_dvs)) {
pr_debug("entering dvs\n");
cur_dvs = true;
gpio_set_value(OSIRIS_GPIO_DVS, 0);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 0bbea75c476b77fa7d7811d6be911cc7583e640f upstream.
Looks like book3s/32 doesn't set RI on machine check, so
checking RI before calling die() will always be fatal
allthought this is not an issue in most cases.
Fixes: b96672dd840f ("powerpc: Machine check interrupt is a non-maskable interrupt")
Fixes: daf00ae71dad ("powerpc/traps: restore recoverability of machine_check interrupts")
Signed-off-by: Christophe Leroy <[email protected]>
Cc: [email protected]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/traps.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -694,15 +694,15 @@ void machine_check_exception(struct pt_r
if (check_io_access(regs))
goto bail;
- /* Must die if the interrupt is not recoverable */
- if (!(regs->msr & MSR_RI))
- nmi_panic(regs, "Unrecoverable Machine check");
-
if (!nested)
nmi_exit();
die("Machine check", regs, SIGBUS);
+ /* Must die if the interrupt is not recoverable */
+ if (!(regs->msr & MSR_RI))
+ nmi_panic(regs, "Unrecoverable Machine check");
+
return;
bail:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julien Thierry <[email protected]>
commit 5870970b9a828d8693aa6d15742573289d7dbcd0 upstream.
When using VHE, the host needs to clear HCR_EL2.TGE bit in order
to interact with guest TLBs, switching from EL2&0 translation regime
to EL1&0.
However, some non-maskable asynchronous event could happen while TGE is
cleared like SDEI. Because of this address translation operations
relying on EL2&0 translation regime could fail (tlb invalidation,
userspace access, ...).
Fix this by properly setting HCR_EL2.TGE when entering NMI context and
clear it if necessary when returning to the interrupted context.
Signed-off-by: Julien Thierry <[email protected]>
Suggested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Reviewed-by: James Morse <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: James Morse <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/hardirq.h | 31 +++++++++++++++++++++++++++++++
arch/arm64/kernel/irq.c | 3 +++
include/linux/hardirq.h | 7 +++++++
3 files changed, 41 insertions(+)
--- a/arch/arm64/include/asm/hardirq.h
+++ b/arch/arm64/include/asm/hardirq.h
@@ -17,8 +17,12 @@
#define __ASM_HARDIRQ_H
#include <linux/cache.h>
+#include <linux/percpu.h>
#include <linux/threads.h>
+#include <asm/barrier.h>
#include <asm/irq.h>
+#include <asm/kvm_arm.h>
+#include <asm/sysreg.h>
#define NR_IPI 7
@@ -37,6 +41,33 @@ u64 smp_irq_stat_cpu(unsigned int cpu);
#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1
+struct nmi_ctx {
+ u64 hcr;
+};
+
+DECLARE_PER_CPU(struct nmi_ctx, nmi_contexts);
+
+#define arch_nmi_enter() \
+ do { \
+ if (is_kernel_in_hyp_mode()) { \
+ struct nmi_ctx *nmi_ctx = this_cpu_ptr(&nmi_contexts); \
+ nmi_ctx->hcr = read_sysreg(hcr_el2); \
+ if (!(nmi_ctx->hcr & HCR_TGE)) { \
+ write_sysreg(nmi_ctx->hcr | HCR_TGE, hcr_el2); \
+ isb(); \
+ } \
+ } \
+ } while (0)
+
+#define arch_nmi_exit() \
+ do { \
+ if (is_kernel_in_hyp_mode()) { \
+ struct nmi_ctx *nmi_ctx = this_cpu_ptr(&nmi_contexts); \
+ if (!(nmi_ctx->hcr & HCR_TGE)) \
+ write_sysreg(nmi_ctx->hcr, hcr_el2); \
+ } \
+ } while (0)
+
static inline void ack_bad_irq(unsigned int irq)
{
extern unsigned long irq_err_count;
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -32,6 +32,9 @@
unsigned long irq_err_count;
+/* Only access this in an NMI enter/exit */
+DEFINE_PER_CPU(struct nmi_ctx, nmi_contexts);
+
DEFINE_PER_CPU(unsigned long *, irq_stack_ptr);
int arch_show_interrupts(struct seq_file *p, int prec)
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -60,8 +60,14 @@ extern void irq_enter(void);
*/
extern void irq_exit(void);
+#ifndef arch_nmi_enter
+#define arch_nmi_enter() do { } while (0)
+#define arch_nmi_exit() do { } while (0)
+#endif
+
#define nmi_enter() \
do { \
+ arch_nmi_enter(); \
printk_nmi_enter(); \
lockdep_off(); \
ftrace_nmi_enter(); \
@@ -80,6 +86,7 @@ extern void irq_exit(void);
ftrace_nmi_exit(); \
lockdep_on(); \
printk_nmi_exit(); \
+ arch_nmi_exit(); \
} while (0)
#endif /* LINUX_HARDIRQ_H */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 0bdb50c531f7377a9da80d3ce2d61f389c84cb30 upstream.
A dm-raid array with devices larger than 4GB won't assemble on
a 32 bit host since _check_data_dev_sectors() was added in 4.16.
This is because to_sector() treats its argument as an "unsigned long"
which is 32bits (4GB) on a 32bit host. Using "unsigned long long"
is more correct.
Kernels as early as 4.2 can have other problems due to to_sector()
being used on the size of a device.
Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality")
cc: [email protected] (v4.2+)
Reported-and-tested-by: Guillaume Perréal <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/device-mapper.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -630,7 +630,7 @@ do { \
*/
#define dm_target_offset(ti, sector) ((sector) - (ti)->begin)
-static inline sector_t to_sector(unsigned long n)
+static inline sector_t to_sector(unsigned long long n)
{
return (n >> SECTOR_SHIFT);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 225557446856448039a9e495da37b72c20071ef2 upstream.
When using dm-integrity underneath md-raid, some tests with raid
auto-correction trigger large amounts of integrity failures - and all
these failures print an error message. These messages can bring the
system to a halt if the system is using serial console.
Fix this by limiting the rate of error messages - it improves the speed
of raid recovery and avoids the hang.
Fixes: 7eada909bfd7a ("dm: add integrity target")
Cc: [email protected] # v4.12+
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-integrity.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -1276,8 +1276,8 @@ again:
checksums_ptr - checksums, !dio->write ? TAG_CMP : TAG_WRITE);
if (unlikely(r)) {
if (r > 0) {
- DMERR("Checksum failed at sector 0x%llx",
- (unsigned long long)(sector - ((r + ic->tag_size - 1) / ic->tag_size)));
+ DMERR_LIMIT("Checksum failed at sector 0x%llx",
+ (unsigned long long)(sector - ((r + ic->tag_size - 1) / ic->tag_size)));
r = -EILSEQ;
atomic64_inc(&ic->number_of_mismatches);
}
@@ -1469,8 +1469,8 @@ retry_kmap:
integrity_sector_checksum(ic, logical_sector, mem + bv.bv_offset, checksums_onstack);
if (unlikely(memcmp(checksums_onstack, journal_entry_tag(ic, je), ic->tag_size))) {
- DMERR("Checksum failed when reading from journal, at sector 0x%llx",
- (unsigned long long)logical_sector);
+ DMERR_LIMIT("Checksum failed when reading from journal, at sector 0x%llx",
+ (unsigned long long)logical_sector);
}
}
#endif
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit f57dcf4c72113c745d83f1c65f7291299f65c14f upstream.
When we fail to add the request to the I/O queue, we currently leave it
to the caller to free the failed request. However since some of the
requests that fail are actually created by nfs_pageio_add_request()
itself, and are not passed back the caller, this leads to a leakage
issue, which can again cause page locks to leak.
This commit addresses the leakage by freeing the created requests on
error, using desc->pg_completion_ops->error_cleanup()
Signed-off-by: Trond Myklebust <[email protected]>
Fixes: a7d42ddb30997 ("nfs: add mirroring support to pgio layer")
Cc: [email protected] # v4.0: c18b96a1b862: nfs: clean up rest of reqs
Cc: [email protected] # v4.0: d600ad1f2bdb: NFS41: pop some layoutget
Cc: [email protected] # v4.0+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -988,6 +988,17 @@ static void nfs_pageio_doio(struct nfs_p
}
}
+static void
+nfs_pageio_cleanup_request(struct nfs_pageio_descriptor *desc,
+ struct nfs_page *req)
+{
+ LIST_HEAD(head);
+
+ nfs_list_remove_request(req);
+ nfs_list_add_request(req, &head);
+ desc->pg_completion_ops->error_cleanup(&head);
+}
+
/**
* nfs_pageio_add_request - Attempt to coalesce a request into a page list.
* @desc: destination io descriptor
@@ -1025,10 +1036,8 @@ static int __nfs_pageio_add_request(stru
nfs_page_group_unlock(req);
desc->pg_moreio = 1;
nfs_pageio_doio(desc);
- if (desc->pg_error < 0)
- return 0;
- if (mirror->pg_recoalesce)
- return 0;
+ if (desc->pg_error < 0 || mirror->pg_recoalesce)
+ goto out_cleanup_subreq;
/* retry add_request for this subreq */
nfs_page_group_lock(req);
continue;
@@ -1061,6 +1070,10 @@ err_ptr:
desc->pg_error = PTR_ERR(subreq);
nfs_page_group_unlock(req);
return 0;
+out_cleanup_subreq:
+ if (req != subreq)
+ nfs_pageio_cleanup_request(desc, subreq);
+ return 0;
}
static int nfs_do_recoalesce(struct nfs_pageio_descriptor *desc)
@@ -1168,11 +1181,14 @@ int nfs_pageio_add_request(struct nfs_pa
if (nfs_pgio_has_mirroring(desc))
desc->pg_mirror_idx = midx;
if (!nfs_pageio_add_request_mirror(desc, dupreq))
- goto out_failed;
+ goto out_cleanup_subreq;
}
return 1;
+out_cleanup_subreq:
+ if (req != dupreq)
+ nfs_pageio_cleanup_request(desc, dupreq);
out_failed:
/* remember fatal errors */
if (nfs_error_is_fatal(desc->pg_error))
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lubomir Rintel <[email protected]>
commit f4817843e39ce78aace0195a57d4e8500a65a898 upstream.
There are two other drivers that bind to mrvl,mmp-uart and both of them
assume register shift of 2 bits. There are device trees that lack the
property and rely on that assumption.
If this driver wins the race to bind to those devices, it should behave
the same as the older deprecated driver.
Signed-off-by: Lubomir Rintel <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_of.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -105,6 +105,10 @@ static int of_platform_serial_setup(stru
if (of_property_read_u32(np, "reg-offset", &prop) == 0)
port->mapbase += prop;
+ /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */
+ if (of_device_is_compatible(np, "mrvl,mmp-uart"))
+ port->regshift = 2;
+
/* Check for registers offset within the devices address range */
if (of_property_read_u32(np, "reg-shift", &prop) == 0)
port->regshift = prop;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dexuan Cui <[email protected]>
commit 43f89877f26671c6309cd87d7364b1a3e66e71cf upstream.
In the case of ND_CMD_CALL, we should also check out_obj->type.
The patch uses out_obj->type, which is a short alias to
out_obj->package.type.
Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism")
Cc: <[email protected]>
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/nfit/core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -329,6 +329,13 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc
return -EINVAL;
}
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ dev_dbg(dev, "%s unexpected output object type cmd: %s type: %d\n",
+ dimm_name, cmd_name, out_obj->type);
+ rc = -EINVAL;
+ goto out;
+ }
+
if (call_pkg) {
call_pkg->nd_fw_size = out_obj->buffer.length;
memcpy(call_pkg->nd_payload + call_pkg->nd_size_in,
@@ -347,13 +354,6 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc
return 0;
}
- if (out_obj->package.type != ACPI_TYPE_BUFFER) {
- dev_dbg(dev, "%s:%s unexpected output object type cmd: %s type: %d\n",
- __func__, dimm_name, cmd_name, out_obj->type);
- rc = -EINVAL;
- goto out;
- }
-
dev_dbg(dev, "%s:%s cmd: %s output length: %d\n", __func__, dimm_name,
cmd_name, out_obj->buffer.length);
print_hex_dump_debug(cmd_name, DUMP_PREFIX_OFFSET, 4, 4,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit c3fcadf0bb765faf45d6d562246e1d08885466df upstream.
Define auxtrace record alignment so that it can be referenced elsewhere.
Note this is preparation for patch "perf intel-pt: Fix overlap calculation
for padding"
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/auxtrace.c | 4 ++--
tools/perf/util/auxtrace.h | 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -1264,9 +1264,9 @@ static int __auxtrace_mmap__read(struct
}
/* padding must be written by fn() e.g. record__process_auxtrace() */
- padding = size & 7;
+ padding = size & (PERF_AUXTRACE_RECORD_ALIGNMENT - 1);
if (padding)
- padding = 8 - padding;
+ padding = PERF_AUXTRACE_RECORD_ALIGNMENT - padding;
memset(&ev, 0, sizeof(ev));
ev.auxtrace.header.type = PERF_RECORD_AUXTRACE;
--- a/tools/perf/util/auxtrace.h
+++ b/tools/perf/util/auxtrace.h
@@ -38,6 +38,9 @@ struct record_opts;
struct auxtrace_info_event;
struct events_stats;
+/* Auxtrace records must have the same alignment as perf event records */
+#define PERF_AUXTRACE_RECORD_ALIGNMENT 8
+
enum auxtrace_type {
PERF_AUXTRACE_UNKNOWN,
PERF_AUXTRACE_INTEL_PT,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 03997612904866abe7cdcc992784ef65cb3a4b81 upstream.
CYC packet timestamp calculation depends upon CBR which was being
cleared upon overflow (OVF). That can cause errors due to failing to
synchronize with sideband events. Even if a CBR change has been lost,
the old CBR is still a better estimate than zero. So remove the clearing
of CBR.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 1 -
1 file changed, 1 deletion(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1389,7 +1389,6 @@ static int intel_pt_overflow(struct inte
{
intel_pt_log("ERROR: Buffer overflow\n");
intel_pt_clear_tx_flags(decoder);
- decoder->cbr = 0;
decoder->timestamp_insn_cnt = 0;
decoder->pkt_state = INTEL_PT_STATE_ERR_RESYNC;
decoder->overflow = true;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 076333870c2f5bdd9b6d31e7ca1909cf0c84cbfa upstream.
When TSC is not available, "timeless" decoding is used but a divide by
zero occurs if perf_time_to_tsc() is called.
Ensure the divisor is not zero.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v4.9+
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt.c | 2 ++
1 file changed, 2 insertions(+)
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -2545,6 +2545,8 @@ int intel_pt_process_auxtrace_info(union
}
pt->timeless_decoding = intel_pt_timeless_decoding(pt);
+ if (pt->timeless_decoding && !pt->tc.time_mult)
+ pt->tc.time_mult = 1;
pt->have_tsc = intel_pt_have_tsc(pt);
pt->sampling_mode = false;
pt->est_tsc = !pt->timeless_decoding;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
commit ca6d5149d2ad0a8d2f9c28cbe379802260a0a5e0 upstream.
GCC 8 warns about the logic in vr_get/set(), which with -Werror breaks
the build:
In function ‘user_regset_copyin’,
inlined from ‘vr_set’ at arch/powerpc/kernel/ptrace.c:628:9:
include/linux/regset.h:295:4: error: ‘memcpy’ offset [-527, -529] is
out of the bounds [0, 16] of object ‘vrsave’ with type ‘union
<anonymous>’ [-Werror=array-bounds]
arch/powerpc/kernel/ptrace.c: In function ‘vr_set’:
arch/powerpc/kernel/ptrace.c:623:5: note: ‘vrsave’ declared here
} vrsave;
This has been identified as a regression in GCC, see GCC bug 88273.
However we can avoid the warning and also simplify the logic and make
it more robust.
Currently we pass -1 as end_pos to user_regset_copyout(). This says
"copy up to the end of the regset".
The definition of the regset is:
[REGSET_VMX] = {
.core_note_type = NT_PPC_VMX, .n = 34,
.size = sizeof(vector128), .align = sizeof(vector128),
.active = vr_active, .get = vr_get, .set = vr_set
},
The end is calculated as (n * size), ie. 34 * sizeof(vector128).
In vr_get/set() we pass start_pos as 33 * sizeof(vector128), meaning
we can copy up to sizeof(vector128) into/out-of vrsave.
The on-stack vrsave is defined as:
union {
elf_vrreg_t reg;
u32 word;
} vrsave;
And elf_vrreg_t is:
typedef __vector128 elf_vrreg_t;
So there is no bug, but we rely on all those sizes lining up,
otherwise we would have a kernel stack exposure/overwrite on our
hands.
Rather than relying on that we can pass an explict end_pos based on
the sizeof(vrsave). The result should be exactly the same but it's
more obviously not over-reading/writing the stack and it avoids the
compiler warning.
Reported-by: Meelis Roos <[email protected]>
Reported-by: Mathieu Malaterre <[email protected]>
Cc: [email protected]
Tested-by: Mathieu Malaterre <[email protected]>
Tested-by: Meelis Roos <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/ptrace.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -547,6 +547,7 @@ static int vr_get(struct task_struct *ta
/*
* Copy out only the low-order word of vrsave.
*/
+ int start, end;
union {
elf_vrreg_t reg;
u32 word;
@@ -555,8 +556,10 @@ static int vr_get(struct task_struct *ta
vrsave.word = target->thread.vrsave;
+ start = 33 * sizeof(vector128);
+ end = start + sizeof(vrsave);
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
- 33 * sizeof(vector128), -1);
+ start, end);
}
return ret;
@@ -594,6 +597,7 @@ static int vr_set(struct task_struct *ta
/*
* We use only the first word of vrsave.
*/
+ int start, end;
union {
elf_vrreg_t reg;
u32 word;
@@ -602,8 +606,10 @@ static int vr_set(struct task_struct *ta
vrsave.word = target->thread.vrsave;
+ start = 33 * sizeof(vector128);
+ end = start + sizeof(vrsave);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
- 33 * sizeof(vector128), -1);
+ start, end);
if (!ret)
target->thread.vrsave = vrsave.word;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jarkko Sakkinen <[email protected]>
commit 3d7a850fdc1a2e4d2adbc95cc0fc962974725e88 upstream.
The current approach to read first 6 bytes from the response and then tail
of the response, can cause the 2nd memcpy_fromio() to do an unaligned read
(e.g. read 32-bit word from address aligned to a 16-bits), depending on how
memcpy_fromio() is implemented. If this happens, the read will fail and the
memory controller will fill the read with 1's.
This was triggered by 170d13ca3a2f, which should be probably refined to
check and react to the address alignment. Before that commit, on x86
memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right
thing (from tpm_crb's perspective) for us so far, but we should not rely on
that. Thus, it makes sense to fix this also in tpm_crb, not least because
the fix can be then backported to stable kernels and make them more robust
when compiled in differing environments.
Cc: [email protected]
Cc: James Morris <[email protected]>
Cc: Tomas Winkler <[email protected]>
Cc: Jerry Snitselaar <[email protected]>
Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Acked-by: Tomas Winkler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_crb.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -288,19 +288,29 @@ static int crb_recv(struct tpm_chip *chi
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
unsigned int expected;
- /* sanity check */
- if (count < 6)
+ /* A sanity check that the upper layer wants to get at least the header
+ * as that is the minimum size for any TPM response.
+ */
+ if (count < TPM_HEADER_SIZE)
return -EIO;
+ /* If this bit is set, according to the spec, the TPM is in
+ * unrecoverable condition.
+ */
if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
return -EIO;
- memcpy_fromio(buf, priv->rsp, 6);
- expected = be32_to_cpup((__be32 *) &buf[2]);
- if (expected > count || expected < 6)
+ /* Read the first 8 bytes in order to get the length of the response.
+ * We read exactly a quad word in order to make sure that the remaining
+ * reads will be aligned.
+ */
+ memcpy_fromio(buf, priv->rsp, 8);
+
+ expected = be32_to_cpup((__be32 *)&buf[2]);
+ if (expected > count || expected < TPM_HEADER_SIZE)
return -EIO;
- memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
+ memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8);
return expected;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jarkko Sakkinen <[email protected]>
commit f5595f5baa30e009bf54d0d7653a9a0cc465be60 upstream.
The send() callback should never return length as it does not in every
driver except tpm_crb in the success case. The reason is that the main
transmit functionality only cares about whether the transmit was
successful or not and ignores the count completely.
Suggested-by: Stefan Berger <[email protected]>
Cc: [email protected]
Signed-off-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Stefan Berger <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Tested-by: Alexander Steffen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/st33zp24/st33zp24.c | 2 +-
drivers/char/tpm/tpm-interface.c | 11 ++++++++++-
drivers/char/tpm/tpm_atmel.c | 2 +-
drivers/char/tpm/tpm_i2c_atmel.c | 6 +++++-
drivers/char/tpm/tpm_i2c_infineon.c | 2 +-
drivers/char/tpm/tpm_i2c_nuvoton.c | 2 +-
drivers/char/tpm/tpm_ibmvtpm.c | 8 ++++----
drivers/char/tpm/tpm_infineon.c | 2 +-
drivers/char/tpm/tpm_nsc.c | 2 +-
drivers/char/tpm/tpm_tis_core.c | 2 +-
drivers/char/tpm/tpm_vtpm_proxy.c | 3 +--
drivers/char/tpm/xen-tpmfront.c | 2 +-
12 files changed, 28 insertions(+), 16 deletions(-)
--- a/drivers/char/tpm/st33zp24/st33zp24.c
+++ b/drivers/char/tpm/st33zp24/st33zp24.c
@@ -438,7 +438,7 @@ static int st33zp24_send(struct tpm_chip
goto out_err;
}
- return len;
+ return 0;
out_err:
st33zp24_cancel(chip);
release_locality(chip);
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -497,10 +497,19 @@ static ssize_t tpm_try_transmit(struct t
if (rc < 0) {
if (rc != -EPIPE)
dev_err(&chip->dev,
- "%s: tpm_send: error %d\n", __func__, rc);
+ "%s: send(): error %d\n", __func__, rc);
goto out;
}
+ /* A sanity check. send() should just return zero on success e.g.
+ * not the command length.
+ */
+ if (rc > 0) {
+ dev_warn(&chip->dev,
+ "%s: send(): invalid value %d\n", __func__, rc);
+ rc = 0;
+ }
+
if (chip->flags & TPM_CHIP_FLAG_IRQ)
goto out_recv;
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -105,7 +105,7 @@ static int tpm_atml_send(struct tpm_chip
iowrite8(buf[i], priv->iobase);
}
- return count;
+ return 0;
}
static void tpm_atml_cancel(struct tpm_chip *chip)
--- a/drivers/char/tpm/tpm_i2c_atmel.c
+++ b/drivers/char/tpm/tpm_i2c_atmel.c
@@ -65,7 +65,11 @@ static int i2c_atmel_send(struct tpm_chi
dev_dbg(&chip->dev,
"%s(buf=%*ph len=%0zx) -> sts=%d\n", __func__,
(int)min_t(size_t, 64, len), buf, len, status);
- return status;
+
+ if (status < 0)
+ return status;
+
+ return 0;
}
static int i2c_atmel_recv(struct tpm_chip *chip, u8 *buf, size_t count)
--- a/drivers/char/tpm/tpm_i2c_infineon.c
+++ b/drivers/char/tpm/tpm_i2c_infineon.c
@@ -587,7 +587,7 @@ static int tpm_tis_i2c_send(struct tpm_c
/* go and do it */
iic_tpm_write(TPM_STS(tpm_dev.locality), &sts, 1);
- return len;
+ return 0;
out_err:
tpm_tis_i2c_ready(chip);
/* The TPM needs some time to clean up here,
--- a/drivers/char/tpm/tpm_i2c_nuvoton.c
+++ b/drivers/char/tpm/tpm_i2c_nuvoton.c
@@ -469,7 +469,7 @@ static int i2c_nuvoton_send(struct tpm_c
}
dev_dbg(dev, "%s() -> %zd\n", __func__, len);
- return len;
+ return 0;
}
static bool i2c_nuvoton_req_canceled(struct tpm_chip *chip, u8 status)
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -141,14 +141,14 @@ static int tpm_ibmvtpm_recv(struct tpm_c
}
/**
- * tpm_ibmvtpm_send - Send tpm request
- *
+ * tpm_ibmvtpm_send() - Send a TPM command
* @chip: tpm chip struct
* @buf: buffer contains data to send
* @count: size of buffer
*
* Return:
- * Number of bytes sent or < 0 on error.
+ * 0 on success,
+ * -errno on error
*/
static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
@@ -194,7 +194,7 @@ static int tpm_ibmvtpm_send(struct tpm_c
rc = 0;
ibmvtpm->tpm_processing_cmd = false;
} else
- rc = count;
+ rc = 0;
spin_unlock(&ibmvtpm->rtce_lock);
return rc;
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -354,7 +354,7 @@ static int tpm_inf_send(struct tpm_chip
for (i = 0; i < count; i++) {
wait_and_send(chip, buf[i]);
}
- return count;
+ return 0;
}
static void tpm_inf_cancel(struct tpm_chip *chip)
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -226,7 +226,7 @@ static int tpm_nsc_send(struct tpm_chip
}
outb(NSC_COMMAND_EOC, priv->base + NSC_COMMAND);
- return count;
+ return 0;
}
static void tpm_nsc_cancel(struct tpm_chip *chip)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -379,7 +379,7 @@ static int tpm_tis_send_main(struct tpm_
goto out_err;
}
}
- return len;
+ return 0;
out_err:
tpm_tis_ready(chip);
return rc;
--- a/drivers/char/tpm/tpm_vtpm_proxy.c
+++ b/drivers/char/tpm/tpm_vtpm_proxy.c
@@ -335,7 +335,6 @@ static int vtpm_proxy_is_driver_command(
static int vtpm_proxy_tpm_op_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct proxy_dev *proxy_dev = dev_get_drvdata(&chip->dev);
- int rc = 0;
if (count > sizeof(proxy_dev->buffer)) {
dev_err(&chip->dev,
@@ -366,7 +365,7 @@ static int vtpm_proxy_tpm_op_send(struct
wake_up_interruptible(&proxy_dev->wq);
- return rc;
+ return 0;
}
static void vtpm_proxy_tpm_op_cancel(struct tpm_chip *chip)
--- a/drivers/char/tpm/xen-tpmfront.c
+++ b/drivers/char/tpm/xen-tpmfront.c
@@ -112,7 +112,7 @@ static int vtpm_send(struct tpm_chip *ch
return -ETIME;
}
- return count;
+ return 0;
}
static int vtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit b602345da6cbb135ba68cf042df8ec9a73da7981 upstream.
If the result of an NFSv3 readdir{,plus} request results in the
"offset" on one entry having to be split across 2 pages, and is sized
so that the next directory entry doesn't fit in the requested size,
then memory corruption can happen.
When encode_entry() is called after encoding the last entry that fits,
it notices that ->offset and ->offset1 are set, and so stores the
offset value in the two pages as required. It clears ->offset1 but
*does not* clear ->offset.
Normally this omission doesn't matter as encode_entry_baggage() will
be called, and will set ->offset to a suitable value (not on a page
boundary).
But in the case where cd->buflen < elen and nfserr_toosmall is
returned, ->offset is not reset.
This means that nfsd3proc_readdirplus will see ->offset with a value 4
bytes before the end of a page, and ->offset1 set to NULL.
It will try to write 8bytes to ->offset.
If we are lucky, the next page will be read-only, and the system will
BUG: unable to handle kernel paging request at...
If we are unlucky, some innocent page will have the first 4 bytes
corrupted.
nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly
writes 8 bytes to the offset wherever it is.
Fix this by clearing ->offset after it is used, and copying the
->offset handling code from nfsd3_proc_readdirplus into
nfsd3_proc_readdir.
(Note that the commit hash in the Fixes tag is from the 'history'
tree - this bug predates git).
Fixes: 0b1d57cf7654 ("[PATCH] kNFSd: Fix nfs3 dentry encoding")
Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654
Cc: [email protected] (v2.6.12+)
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs3proc.c | 16 ++++++++++++++--
fs/nfsd/nfs3xdr.c | 1 +
2 files changed, 15 insertions(+), 2 deletions(-)
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -446,8 +446,19 @@ nfsd3_proc_readdir(struct svc_rqst *rqst
&resp->common, nfs3svc_encode_entry);
memcpy(resp->verf, argp->verf, 8);
resp->count = resp->buffer - argp->buffer;
- if (resp->offset)
- xdr_encode_hyper(resp->offset, argp->cookie);
+ if (resp->offset) {
+ loff_t offset = argp->cookie;
+
+ if (unlikely(resp->offset1)) {
+ /* we ended up with offset on a page boundary */
+ *resp->offset = htonl(offset >> 32);
+ *resp->offset1 = htonl(offset & 0xffffffff);
+ resp->offset1 = NULL;
+ } else {
+ xdr_encode_hyper(resp->offset, offset);
+ }
+ resp->offset = NULL;
+ }
RETURN_STATUS(nfserr);
}
@@ -516,6 +527,7 @@ nfsd3_proc_readdirplus(struct svc_rqst *
} else {
xdr_encode_hyper(resp->offset, offset);
}
+ resp->offset = NULL;
}
RETURN_STATUS(nfserr);
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -922,6 +922,7 @@ encode_entry(struct readdir_cd *ccd, con
} else {
xdr_encode_hyper(cd->offset, offset64);
}
+ cd->offset = NULL;
}
/*
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit c1dffe0bf7f9c3d57d9f237a7cb2a81e62babd2b upstream.
If we have to retransmit a request, we should ensure that we reinitialise
the sequence results structure, since in the event of a signal
we need to treat the request as if it had not been sent.
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -914,6 +914,13 @@ nfs4_sequence_process_interrupted(struct
#endif /* !CONFIG_NFS_V4_1 */
+static void nfs41_sequence_res_init(struct nfs4_sequence_res *res)
+{
+ res->sr_timestamp = jiffies;
+ res->sr_status_flags = 0;
+ res->sr_status = 1;
+}
+
static
void nfs4_sequence_attach_slot(struct nfs4_sequence_args *args,
struct nfs4_sequence_res *res,
@@ -925,10 +932,6 @@ void nfs4_sequence_attach_slot(struct nf
args->sa_slot = slot;
res->sr_slot = slot;
- res->sr_timestamp = jiffies;
- res->sr_status_flags = 0;
- res->sr_status = 1;
-
}
int nfs4_setup_sequence(struct nfs_client *client,
@@ -974,6 +977,7 @@ int nfs4_setup_sequence(struct nfs_clien
trace_nfs4_setup_sequence(session, args);
out_start:
+ nfs41_sequence_res_init(res);
rpc_call_start(task);
return 0;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yihao Wu <[email protected]>
commit dd838821f0a29781b185cd8fb8e48d5c177bd838 upstream.
Commit 62a063b8e7d1 "nfsd4: fix crash on writing v4_end_grace before
nfsd startup" is trying to fix a NULL dereference issue, but it
mistakenly checks if the nfsd server is started. So fix it.
Fixes: 62a063b8e7d1 "nfsd4: fix crash on writing v4_end_grace before nfsd startup"
Cc: [email protected]
Reviewed-by: Joseph Qi <[email protected]>
Signed-off-by: Yihao Wu <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfsctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -1126,7 +1126,7 @@ static ssize_t write_v4_end_grace(struct
case 'Y':
case 'y':
case '1':
- if (nn->nfsd_serv)
+ if (!nn->nfsd_serv)
return -EBUSY;
nfsd4_end_grace(nn);
break;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 6d183ca8baec983dc4208ca45ece3c36763df912 upstream.
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC
deny the use of BATS for mapping memory.
This patch makes sure that the specific wii RAM mapping function
takes it into account as well.
Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram")
Cc: [email protected]
Reviewed-by: Jonathan Neuschafer <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/embedded6xx/wii.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -104,6 +104,10 @@ unsigned long __init wii_mmu_mapin_mem2(
/* MEM2 64MB@0x10000000 */
delta = wii_hole_start + wii_hole_size;
size = top - delta;
+
+ if (__map_without_bats)
+ return delta;
+
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > size)
break;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Axtens <[email protected]>
commit 9951379b0ca88c95876ad9778b9099e19a95d566 upstream.
Some users see panics like the following when performing fstrim on a
bcached volume:
[ 529.803060] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 530.183928] #PF error: [normal kernel read fault]
[ 530.412392] PGD 8000001f42163067 P4D 8000001f42163067 PUD 1f42168067 PMD 0
[ 530.750887] Oops: 0000 [#1] SMP PTI
[ 530.920869] CPU: 10 PID: 4167 Comm: fstrim Kdump: loaded Not tainted 5.0.0-rc1+ #3
[ 531.290204] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015
[ 531.693137] RIP: 0010:blk_queue_split+0x148/0x620
[ 531.922205] Code: 60 38 89 55 a0 45 31 db 45 31 f6 45 31 c9 31 ff 89 4d 98 85 db 0f 84 7f 04 00 00 44 8b 6d 98 4c 89 ee 48 c1 e6 04 49 03 70 78 <8b> 46 08 44 8b 56 0c 48
8b 16 44 29 e0 39 d8 48 89 55 a8 0f 47 c3
[ 532.838634] RSP: 0018:ffffb9b708df39b0 EFLAGS: 00010246
[ 533.093571] RAX: 00000000ffffffff RBX: 0000000000046000 RCX: 0000000000000000
[ 533.441865] RDX: 0000000000000200 RSI: 0000000000000000 RDI: 0000000000000000
[ 533.789922] RBP: ffffb9b708df3a48 R08: ffff940d3b3fdd20 R09: 0000000000000000
[ 534.137512] R10: ffffb9b708df3958 R11: 0000000000000000 R12: 0000000000000000
[ 534.485329] R13: 0000000000000000 R14: 0000000000000000 R15: ffff940d39212020
[ 534.833319] FS: 00007efec26e3840(0000) GS:ffff940d1f480000(0000) knlGS:0000000000000000
[ 535.224098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 535.504318] CR2: 0000000000000008 CR3: 0000001f4e256004 CR4: 00000000001606e0
[ 535.851759] Call Trace:
[ 535.970308] ? mempool_alloc_slab+0x15/0x20
[ 536.174152] ? bch_data_insert+0x42/0xd0 [bcache]
[ 536.403399] blk_mq_make_request+0x97/0x4f0
[ 536.607036] generic_make_request+0x1e2/0x410
[ 536.819164] submit_bio+0x73/0x150
[ 536.980168] ? submit_bio+0x73/0x150
[ 537.149731] ? bio_associate_blkg_from_css+0x3b/0x60
[ 537.391595] ? _cond_resched+0x1a/0x50
[ 537.573774] submit_bio_wait+0x59/0x90
[ 537.756105] blkdev_issue_discard+0x80/0xd0
[ 537.959590] ext4_trim_fs+0x4a9/0x9e0
[ 538.137636] ? ext4_trim_fs+0x4a9/0x9e0
[ 538.324087] ext4_ioctl+0xea4/0x1530
[ 538.497712] ? _copy_to_user+0x2a/0x40
[ 538.679632] do_vfs_ioctl+0xa6/0x600
[ 538.853127] ? __do_sys_newfstat+0x44/0x70
[ 539.051951] ksys_ioctl+0x6d/0x80
[ 539.212785] __x64_sys_ioctl+0x1a/0x20
[ 539.394918] do_syscall_64+0x5a/0x110
[ 539.568674] entry_SYSCALL_64_after_hwframe+0x44/0xa9
We have observed it where both:
1) LVM/devmapper is involved (bcache backing device is LVM volume) and
2) writeback cache is involved (bcache cache_mode is writeback)
On one machine, we can reliably reproduce it with:
# echo writeback > /sys/block/bcache0/bcache/cache_mode
(not sure whether above line is required)
# mount /dev/bcache0 /test
# for i in {0..10}; do
file="$(mktemp /test/zero.XXX)"
dd if=/dev/zero of="$file" bs=1M count=256
sync
rm $file
done
# fstrim -v /test
Observing this with tracepoints on, we see the following writes:
fstrim-18019 [022] .... 91107.302026: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 4260112 + 196352 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302050: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 4456464 + 262144 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302075: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 4718608 + 81920 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302094: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 5324816 + 180224 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302121: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 5505040 + 262144 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302145: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 5767184 + 81920 hit 0 bypass 1
fstrim-18019 [022] .... 91107.308777: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 6373392 + 180224 hit 1 bypass 0
<crash>
Note the final one has different hit/bypass flags.
This is because in should_writeback(), we were hitting a case where
the partial stripe condition was returning true and so
should_writeback() was returning true early.
If that hadn't been the case, it would have hit the would_skip test, and
as would_skip == s->iop.bypass == true, should_writeback() would have
returned false.
Looking at the git history from 'commit 72c270612bd3 ("bcache: Write out
full stripes")', it looks like the idea was to optimise for raid5/6:
* If a stripe is already dirty, force writes to that stripe to
writeback mode - to help build up full stripes of dirty data
To fix this issue, make sure that should_writeback() on a discard op
never returns true.
More details of debugging:
https://www.spinics.net/lists/linux-bcache/msg06996.html
Previous reports:
- https://bugzilla.kernel.org/show_bug.cgi?id=201051
- https://bugzilla.kernel.org/show_bug.cgi?id=196103
- https://www.spinics.net/lists/linux-bcache/msg06885.html
(Coly Li: minor modification to follow maximum 75 chars per line rule)
Cc: Kent Overstreet <[email protected]>
Cc: [email protected]
Fixes: 72c270612bd3 ("bcache: Write out full stripes")
Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/writeback.h | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/md/bcache/writeback.h
+++ b/drivers/md/bcache/writeback.h
@@ -69,6 +69,9 @@ static inline bool should_writeback(stru
in_use > CUTOFF_WRITEBACK_SYNC)
return false;
+ if (bio_op(bio) == REQ_OP_DISCARD)
+ return false;
+
if (dc->partial_stripes_expensive &&
bcache_dev_stripe_dirty(dc, bio->bi_iter.bi_sector,
bio_sectors(bio)))
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit 904cdbd41d749a476863a0ca41f6f396774f26e4 upstream.
Now, we capture a data corruption problem on ext4 while we're truncating
an extent index block. Imaging that if we are revoking a buffer which
has been journaled by the committing transaction, the buffer's jbddirty
flag will not be cleared in jbd2_journal_forget(), so the commit code
will set the buffer dirty flag again after refile the buffer.
fsx kjournald2
jbd2_journal_commit_transaction
jbd2_journal_revoke commit phase 1~5...
jbd2_journal_forget
belongs to older transaction commit phase 6
jbddirty not clear __jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
test_clear_buffer_jbddirty
mark_buffer_dirty
Finally, if the freed extent index block was allocated again as data
block by some other files, it may corrupt the file data after writing
cached pages later, such as during unmount time. (In general,
clean_bdev_aliases() related helpers should be invoked after
re-allocation to prevent the above corruption, but unfortunately we
missed it when zeroout the head of extra extent blocks in
ext4_ext_handle_unwritten_extents()).
This patch mark buffer as freed and set j_next_transaction to the new
transaction when it already belongs to the committing transaction in
jbd2_journal_forget(), so that commit code knows it should clear dirty
bits when it is done with the buffer.
This problem can be reproduced by xfstests generic/455 easily with
seeds (3246 3247 3248 3249).
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jbd2/transaction.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1581,14 +1581,21 @@ int jbd2_journal_forget (handle_t *handl
/* However, if the buffer is still owned by a prior
* (committing) transaction, we can't drop it yet... */
JBUFFER_TRACE(jh, "belongs to older transaction");
- /* ... but we CAN drop it from the new transaction if we
- * have also modified it since the original commit. */
+ /* ... but we CAN drop it from the new transaction through
+ * marking the buffer as freed and set j_next_transaction to
+ * the new transaction, so that not only the commit code
+ * knows it should clear dirty bits when it is done with the
+ * buffer, but also the buffer can be checkpointed only
+ * after the new transaction commits. */
- if (jh->b_next_transaction) {
- J_ASSERT(jh->b_next_transaction == transaction);
+ set_buffer_freed(bh);
+
+ if (!jh->b_next_transaction) {
spin_lock(&journal->j_list_lock);
- jh->b_next_transaction = NULL;
+ jh->b_next_transaction = transaction;
spin_unlock(&journal->j_list_lock);
+ } else {
+ J_ASSERT(jh->b_next_transaction == transaction);
/*
* only drop a reference if this transaction modified
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 9580b71b5a7863c24a9bd18bcd2ad759b86b1eff upstream.
Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order
to avoid confusing stacktrace like the one below.
Call Trace:
[c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable)
[c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180
[c0e9dd10] [c0895130] memchr+0x24/0x74
[c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574
[c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8
[c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4
--- interrupt: c0e9df00 at 0x400f330
LR = init_stack+0x1f00/0x2000
[c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable)
[c0e9df20] [c0c27e44] early_irq_init+0x38/0x108
[c0e9df50] [c0c15434] start_kernel+0x310/0x488
[c0e9dff0] [00003484] 0x3484
With this patch the trace becomes:
Call Trace:
[c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable)
[c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180
[c0e9dd10] [c0895150] memchr+0x24/0x74
[c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574
[c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8
[c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4
[c0e9de80] [c00ae3e4] printk+0xa8/0xcc
[c0e9df20] [c0c27e44] early_irq_init+0x38/0x108
[c0e9df50] [c0c15434] start_kernel+0x310/0x488
[c0e9dff0] [00003484] 0x3484
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/entry_32.S | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -726,6 +726,9 @@ fast_exception_return:
mtcr r10
lwz r10,_LINK(r11)
mtlr r10
+ /* Clear the exception_marker on the stack to avoid confusing stacktrace */
+ li r10, 0
+ stw r10, 8(r11)
REST_GPR(10, r11)
#ifdef CONFIG_PPC_8xx_PERF_EVENT
mtspr SPRN_NRI, r0
@@ -963,6 +966,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRE
mtcrf 0xFF,r10
mtlr r11
+ /* Clear the exception_marker on the stack to avoid confusing stacktrace */
+ li r10, 0
+ stw r10, 8(r1)
/*
* Once we put values in SRR0 and SRR1, we are in a state
* where exceptions are not recoverable, since taking an
@@ -1002,6 +1008,9 @@ exc_exit_restart_end:
mtlr r11
lwz r10,_CCR(r1)
mtcrf 0xff,r10
+ /* Clear the exception_marker on the stack to avoid confusing stacktrace */
+ li r10, 0
+ stw r10, 8(r1)
REST_2GPRS(9, r1)
.globl exc_exit_restart
exc_exit_restart:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jay Dolan <[email protected]>
commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream.
Have the correct number of ports created for ACCES serial cards. Two port
cards show up as four ports, and four port cards show up as eight.
Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Signed-off-by: Jay Dolan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -4580,10 +4580,10 @@ static const struct pci_device_id serial
*/
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4592,10 +4592,10 @@ static const struct pci_device_id serial
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4604,10 +4604,10 @@ static const struct pci_device_id serial
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4616,13 +4616,13 @@ static const struct pci_device_id serial
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7951 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4631,16 +4631,16 @@ static const struct pci_device_id serial
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4649,13 +4649,13 @@ static const struct pci_device_id serial
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
@@ -4664,19 +4664,19 @@ static const struct pci_device_id serial
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 5a99d99e3310a565b0cf63f785b347be9ee0da45 upstream.
Auxtrace records might have up to 7 bytes of padding appended. Adjust
the overlap accordingly.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 36 ++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -26,6 +26,7 @@
#include "../cache.h"
#include "../util.h"
+#include "../auxtrace.h"
#include "intel-pt-insn-decoder.h"
#include "intel-pt-pkt-decoder.h"
@@ -2558,6 +2559,34 @@ static int intel_pt_tsc_cmp(uint64_t tsc
}
}
+#define MAX_PADDING (PERF_AUXTRACE_RECORD_ALIGNMENT - 1)
+
+/**
+ * adj_for_padding - adjust overlap to account for padding.
+ * @buf_b: second buffer
+ * @buf_a: first buffer
+ * @len_a: size of first buffer
+ *
+ * @buf_a might have up to 7 bytes of padding appended. Adjust the overlap
+ * accordingly.
+ *
+ * Return: A pointer into @buf_b from where non-overlapped data starts
+ */
+static unsigned char *adj_for_padding(unsigned char *buf_b,
+ unsigned char *buf_a, size_t len_a)
+{
+ unsigned char *p = buf_b - MAX_PADDING;
+ unsigned char *q = buf_a + len_a - MAX_PADDING;
+ int i;
+
+ for (i = MAX_PADDING; i; i--, p++, q++) {
+ if (*p != *q)
+ break;
+ }
+
+ return p;
+}
+
/**
* intel_pt_find_overlap_tsc - determine start of non-overlapped trace data
* using TSC.
@@ -2608,8 +2637,11 @@ static unsigned char *intel_pt_find_over
/* Same TSC, so buffers are consecutive */
if (!cmp && rem_b >= rem_a) {
+ unsigned char *start;
+
*consecutive = true;
- return buf_b + len_b - (rem_b - rem_a);
+ start = buf_b + len_b - (rem_b - rem_a);
+ return adj_for_padding(start, buf_a, len_a);
}
if (cmp < 0)
return buf_b; /* tsc_a < tsc_b => no overlap */
@@ -2672,7 +2704,7 @@ unsigned char *intel_pt_find_overlap(uns
found = memmem(buf_a, len_a, buf_b, len_a);
if (found) {
*consecutive = true;
- return buf_b + len_a;
+ return adj_for_padding(buf_b + len_a, buf_a, len_a);
}
/* Try again at next PSB in buffer 'a' */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit 8570f9e881e3fde98801bb3a47eef84dd934d405 upstream.
The address size of an instruction affects the effective address, not
the virtual/linear address. The final address may still be truncated,
e.g. to 32-bits outside of long mode, but that happens irrespective of
the address size, e.g. a 32-bit address size can yield a 64-bit virtual
address when using FS/GS with a non-zero base.
Fixes: 064aea774768 ("KVM: nVMX: Decoding memory operands of VMX instructions")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7455,20 +7455,41 @@ static int get_vmx_mem_address(struct kv
if (index_is_valid)
off += kvm_register_read(vcpu, index_reg)<<scaling;
vmx_get_segment(vcpu, &s, seg_reg);
- *ret = s.base + off;
+ /*
+ * The effective address, i.e. @off, of a memory operand is truncated
+ * based on the address size of the instruction. Note that this is
+ * the *effective address*, i.e. the address prior to accounting for
+ * the segment's base.
+ */
if (addr_size == 1) /* 32 bit */
- *ret &= 0xffffffff;
+ off &= 0xffffffff;
+ else if (addr_size == 0) /* 16 bit */
+ off &= 0xffff;
/* Checks for #GP/#SS exceptions. */
exn = false;
if (is_long_mode(vcpu)) {
+ /*
+ * The virtual/linear address is never truncated in 64-bit
+ * mode, e.g. a 32-bit address size can yield a 64-bit virtual
+ * address when using FS/GS with a non-zero base.
+ */
+ *ret = s.base + off;
+
/* Long mode: #GP(0)/#SS(0) if the memory address is in a
* non-canonical form. This is the only check on the memory
* destination for long mode!
*/
exn = is_noncanonical_address(*ret, vcpu);
} else if (is_protmode(vcpu)) {
+ /*
+ * When not in long mode, the virtual/linear address is
+ * unconditionally truncated to 32 bits regardless of the
+ * address size.
+ */
+ *ret = (s.base + off) & 0xffffffff;
+
/* Protected mode: apply checks for segment validity in the
* following order:
* - segment type check (#GP(0) may be thrown)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Schwidefsky <[email protected]>
commit 86a86804e4f18fc3880541b3d5a07f4df0fe29cb upstream.
The fix to make WARN work in the early boot code created a problem
on older machines without EDAT-1. The setup_lowcore_dat_on function
uses the pointer from lowcore_ptr[0] to set the DAT bit in the new
PSWs. That does not work if the kernel page table is set up with
4K pages as the prefix address maps to absolute zero.
To make this work the PSWs need to be changed with via address 0 in
form of the S390_lowcore definition.
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Cornelia Huck <[email protected]>
Fixes: 94f85ed3e2f8 ("s390/setup: fix early warning messages")
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/setup.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -390,13 +390,12 @@ static void __init setup_lowcore_dat_off
static void __init setup_lowcore_dat_on(void)
{
- struct lowcore *lc;
-
- lc = lowcore_ptr[0];
- lc->external_new_psw.mask |= PSW_MASK_DAT;
- lc->svc_new_psw.mask |= PSW_MASK_DAT;
- lc->program_new_psw.mask |= PSW_MASK_DAT;
- lc->io_new_psw.mask |= PSW_MASK_DAT;
+ __ctl_clear_bit(0, 28);
+ S390_lowcore.external_new_psw.mask |= PSW_MASK_DAT;
+ S390_lowcore.svc_new_psw.mask |= PSW_MASK_DAT;
+ S390_lowcore.program_new_psw.mask |= PSW_MASK_DAT;
+ S390_lowcore.io_new_psw.mask |= PSW_MASK_DAT;
+ __ctl_set_bit(0, 28);
}
static struct resource code_resource = {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve Longerbeam <[email protected]>
commit 2e0fe66e0a136252f4d89dbbccdcb26deb867eb8 upstream.
Disable the CSI immediately after receiving the last EOF before stream
off (and thus before disabling the IDMA channel). Do this by moving the
wait for EOF completion into a new function csi_idmac_wait_last_eof().
This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:
while true; do v4l2-ctl -d4 --stream-mmap --stream-count=3; done
Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.
The lockup occurs when disabling the IDMA channel at stream off. Disabling
the CSI before disabling the IDMA channel appears to be a reliable fix for
the hard lockup.
Fixes: 4a34ec8e470cb ("[media] media: imx: Add CSI subdev driver")
Reported-by: Gaël PORTAY <[email protected]>
Signed-off-by: Steve Longerbeam <[email protected]>
Cc: [email protected] # for 4.13 and up
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/imx/imx-media-csi.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -538,7 +538,7 @@ out_put_ipu:
return ret;
}
-static void csi_idmac_stop(struct csi_priv *priv)
+static void csi_idmac_wait_last_eof(struct csi_priv *priv)
{
unsigned long flags;
int ret;
@@ -555,7 +555,10 @@ static void csi_idmac_stop(struct csi_pr
&priv->last_eof_comp, msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
if (ret == 0)
v4l2_warn(&priv->sd, "wait last EOF timeout\n");
+}
+static void csi_idmac_stop(struct csi_priv *priv)
+{
devm_free_irq(priv->dev, priv->eof_irq, priv);
devm_free_irq(priv->dev, priv->nfb4eof_irq, priv);
@@ -681,6 +684,16 @@ idmac_stop:
static void csi_stop(struct csi_priv *priv)
{
+ if (priv->dest == IPU_CSI_DEST_IDMAC)
+ csi_idmac_wait_last_eof(priv);
+
+ /*
+ * Disable the CSI asap, after syncing with the last EOF.
+ * Doing so after the IDMA channel is disabled has shown to
+ * create hard system-wide hangs.
+ */
+ ipu_csi_disable(priv->csi);
+
if (priv->dest == IPU_CSI_DEST_IDMAC) {
csi_idmac_stop(priv);
@@ -688,8 +701,6 @@ static void csi_stop(struct csi_priv *pr
if (priv->fim)
imx_media_fim_set_stream(priv->fim, NULL, false);
}
-
- ipu_csi_disable(priv->csi);
}
static const struct csi_skip_desc csi_skip[12] = {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 4d91969ed4dbcefd0e78f77494f0cb8fada9048a upstream.
Whether we need to exit early, or just reprocess the list, we
must not lost track of the request which failed to get recoalesced.
Fixes: 03d5eb65b538 ("NFS: Fix a memory leak in nfs_do_recoalesce")
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v4.0+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1092,7 +1092,6 @@ static int nfs_do_recoalesce(struct nfs_
struct nfs_page *req;
req = list_first_entry(&head, struct nfs_page, wb_list);
- nfs_list_remove_request(req);
if (__nfs_pageio_add_request(desc, req))
continue;
if (desc->pg_error < 0) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas A. M. Magalhães <[email protected]>
commit adc589d2a20808fb99d46a78175cd023f2040338 upstream.
Add a linear pipeline logic for the stream control. It's created by
walking backwards on the entity graph. When the stream starts it will
simply loop through the pipeline calling the respective process_frame
function of each entity.
Fixes: f2fe89061d797 ("vimc: Virtual Media Controller core, capture
and sensor")
Cc: [email protected] # for v4.20
Signed-off-by: Lucas A. M. Magalhães <[email protected]>
Acked-by: Helen Koike <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[[email protected]: fixed small space-after-tab issue in the patch]
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/vimc/Makefile | 3
drivers/media/platform/vimc/vimc-capture.c | 18 +-
drivers/media/platform/vimc/vimc-common.c | 35 -----
drivers/media/platform/vimc/vimc-common.h | 15 --
drivers/media/platform/vimc/vimc-debayer.c | 26 ---
drivers/media/platform/vimc/vimc-scaler.c | 28 ----
drivers/media/platform/vimc/vimc-sensor.c | 56 +-------
drivers/media/platform/vimc/vimc-streamer.c | 188 ++++++++++++++++++++++++++++
drivers/media/platform/vimc/vimc-streamer.h | 38 +++++
9 files changed, 260 insertions(+), 147 deletions(-)
--- a/drivers/media/platform/vimc/Makefile
+++ b/drivers/media/platform/vimc/Makefile
@@ -5,6 +5,7 @@ vimc_common-objs := vimc-common.o
vimc_debayer-objs := vimc-debayer.o
vimc_scaler-objs := vimc-scaler.o
vimc_sensor-objs := vimc-sensor.o
+vimc_streamer-objs := vimc-streamer.o
obj-$(CONFIG_VIDEO_VIMC) += vimc.o vimc_capture.o vimc_common.o vimc-debayer.o \
- vimc_scaler.o vimc_sensor.o
+ vimc_scaler.o vimc_sensor.o vimc_streamer.o
--- a/drivers/media/platform/vimc/vimc-capture.c
+++ b/drivers/media/platform/vimc/vimc-capture.c
@@ -23,6 +23,7 @@
#include <media/videobuf2-vmalloc.h>
#include "vimc-common.h"
+#include "vimc-streamer.h"
#define VIMC_CAP_DRV_NAME "vimc-capture"
@@ -43,7 +44,7 @@ struct vimc_cap_device {
spinlock_t qlock;
struct mutex lock;
u32 sequence;
- struct media_pipeline pipe;
+ struct vimc_stream stream;
};
static const struct v4l2_pix_format fmt_default = {
@@ -247,14 +248,13 @@ static int vimc_cap_start_streaming(stru
vcap->sequence = 0;
/* Start the media pipeline */
- ret = media_pipeline_start(entity, &vcap->pipe);
+ ret = media_pipeline_start(entity, &vcap->stream.pipe);
if (ret) {
vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
return ret;
}
- /* Enable streaming from the pipe */
- ret = vimc_pipeline_s_stream(&vcap->vdev.entity, 1);
+ ret = vimc_streamer_s_stream(&vcap->stream, &vcap->ved, 1);
if (ret) {
media_pipeline_stop(entity);
vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED);
@@ -272,8 +272,7 @@ static void vimc_cap_stop_streaming(stru
{
struct vimc_cap_device *vcap = vb2_get_drv_priv(vq);
- /* Disable streaming from the pipe */
- vimc_pipeline_s_stream(&vcap->vdev.entity, 0);
+ vimc_streamer_s_stream(&vcap->stream, &vcap->ved, 0);
/* Stop the media pipeline */
media_pipeline_stop(&vcap->vdev.entity);
@@ -354,8 +353,8 @@ static void vimc_cap_comp_unbind(struct
kfree(vcap);
}
-static void vimc_cap_process_frame(struct vimc_ent_device *ved,
- struct media_pad *sink, const void *frame)
+static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
+ const void *frame)
{
struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
ved);
@@ -369,7 +368,7 @@ static void vimc_cap_process_frame(struc
typeof(*vimc_buf), list);
if (!vimc_buf) {
spin_unlock(&vcap->qlock);
- return;
+ return ERR_PTR(-EAGAIN);
}
/* Remove this entry from the list */
@@ -390,6 +389,7 @@ static void vimc_cap_process_frame(struc
vb2_set_plane_payload(&vimc_buf->vb2.vb2_buf, 0,
vcap->format.sizeimage);
vb2_buffer_done(&vimc_buf->vb2.vb2_buf, VB2_BUF_STATE_DONE);
+ return NULL;
}
static int vimc_cap_comp_bind(struct device *comp, struct device *master,
--- a/drivers/media/platform/vimc/vimc-common.c
+++ b/drivers/media/platform/vimc/vimc-common.c
@@ -207,41 +207,6 @@ const struct vimc_pix_map *vimc_pix_map_
}
EXPORT_SYMBOL_GPL(vimc_pix_map_by_pixelformat);
-int vimc_propagate_frame(struct media_pad *src, const void *frame)
-{
- struct media_link *link;
-
- if (!(src->flags & MEDIA_PAD_FL_SOURCE))
- return -EINVAL;
-
- /* Send this frame to all sink pads that are direct linked */
- list_for_each_entry(link, &src->entity->links, list) {
- if (link->source == src &&
- (link->flags & MEDIA_LNK_FL_ENABLED)) {
- struct vimc_ent_device *ved = NULL;
- struct media_entity *entity = link->sink->entity;
-
- if (is_media_entity_v4l2_subdev(entity)) {
- struct v4l2_subdev *sd =
- container_of(entity, struct v4l2_subdev,
- entity);
- ved = v4l2_get_subdevdata(sd);
- } else if (is_media_entity_v4l2_video_device(entity)) {
- struct video_device *vdev =
- container_of(entity,
- struct video_device,
- entity);
- ved = video_get_drvdata(vdev);
- }
- if (ved && ved->process_frame)
- ved->process_frame(ved, link->sink, frame);
- }
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(vimc_propagate_frame);
-
/* Helper function to allocate and initialize pads */
struct media_pad *vimc_pads_init(u16 num_pads, const unsigned long *pads_flag)
{
--- a/drivers/media/platform/vimc/vimc-common.h
+++ b/drivers/media/platform/vimc/vimc-common.h
@@ -108,24 +108,13 @@ struct vimc_pix_map {
struct vimc_ent_device {
struct media_entity *ent;
struct media_pad *pads;
- void (*process_frame)(struct vimc_ent_device *ved,
- struct media_pad *sink, const void *frame);
+ void * (*process_frame)(struct vimc_ent_device *ved,
+ const void *frame);
void (*vdev_get_format)(struct vimc_ent_device *ved,
struct v4l2_pix_format *fmt);
};
/**
- * vimc_propagate_frame - propagate a frame through the topology
- *
- * @src: the source pad where the frame is being originated
- * @frame: the frame to be propagated
- *
- * This function will call the process_frame callback from the vimc_ent_device
- * struct of the nodes directly connected to the @src pad
- */
-int vimc_propagate_frame(struct media_pad *src, const void *frame);
-
-/**
* vimc_pads_init - initialize pads
*
* @num_pads: number of pads to initialize
--- a/drivers/media/platform/vimc/vimc-debayer.c
+++ b/drivers/media/platform/vimc/vimc-debayer.c
@@ -320,7 +320,6 @@ static void vimc_deb_set_rgb_mbus_fmt_rg
static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
{
struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
- int ret;
if (enable) {
const struct vimc_pix_map *vpix;
@@ -350,22 +349,10 @@ static int vimc_deb_s_stream(struct v4l2
if (!vdeb->src_frame)
return -ENOMEM;
- /* Turn the stream on in the subdevices directly connected */
- ret = vimc_pipeline_s_stream(&vdeb->sd.entity, 1);
- if (ret) {
- vfree(vdeb->src_frame);
- vdeb->src_frame = NULL;
- return ret;
- }
} else {
if (!vdeb->src_frame)
return 0;
- /* Disable streaming from the pipe */
- ret = vimc_pipeline_s_stream(&vdeb->sd.entity, 0);
- if (ret)
- return ret;
-
vfree(vdeb->src_frame);
vdeb->src_frame = NULL;
}
@@ -479,9 +466,8 @@ static void vimc_deb_calc_rgb_sink(struc
}
}
-static void vimc_deb_process_frame(struct vimc_ent_device *ved,
- struct media_pad *sink,
- const void *sink_frame)
+static void *vimc_deb_process_frame(struct vimc_ent_device *ved,
+ const void *sink_frame)
{
struct vimc_deb_device *vdeb = container_of(ved, struct vimc_deb_device,
ved);
@@ -490,7 +476,7 @@ static void vimc_deb_process_frame(struc
/* If the stream in this node is not active, just return */
if (!vdeb->src_frame)
- return;
+ return ERR_PTR(-EINVAL);
for (i = 0; i < vdeb->sink_fmt.height; i++)
for (j = 0; j < vdeb->sink_fmt.width; j++) {
@@ -498,12 +484,8 @@ static void vimc_deb_process_frame(struc
vdeb->set_rgb_src(vdeb, i, j, rgb);
}
- /* Propagate the frame through all source pads */
- for (i = 1; i < vdeb->sd.entity.num_pads; i++) {
- struct media_pad *pad = &vdeb->sd.entity.pads[i];
+ return vdeb->src_frame;
- vimc_propagate_frame(pad, vdeb->src_frame);
- }
}
static void vimc_deb_comp_unbind(struct device *comp, struct device *master,
--- a/drivers/media/platform/vimc/vimc-scaler.c
+++ b/drivers/media/platform/vimc/vimc-scaler.c
@@ -216,7 +216,6 @@ static const struct v4l2_subdev_pad_ops
static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
{
struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
- int ret;
if (enable) {
const struct vimc_pix_map *vpix;
@@ -244,22 +243,10 @@ static int vimc_sca_s_stream(struct v4l2
if (!vsca->src_frame)
return -ENOMEM;
- /* Turn the stream on in the subdevices directly connected */
- ret = vimc_pipeline_s_stream(&vsca->sd.entity, 1);
- if (ret) {
- vfree(vsca->src_frame);
- vsca->src_frame = NULL;
- return ret;
- }
} else {
if (!vsca->src_frame)
return 0;
- /* Disable streaming from the pipe */
- ret = vimc_pipeline_s_stream(&vsca->sd.entity, 0);
- if (ret)
- return ret;
-
vfree(vsca->src_frame);
vsca->src_frame = NULL;
}
@@ -345,26 +332,19 @@ static void vimc_sca_fill_src_frame(cons
vimc_sca_scale_pix(vsca, i, j, sink_frame);
}
-static void vimc_sca_process_frame(struct vimc_ent_device *ved,
- struct media_pad *sink,
- const void *sink_frame)
+static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
+ const void *sink_frame)
{
struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
ved);
- unsigned int i;
/* If the stream in this node is not active, just return */
if (!vsca->src_frame)
- return;
+ return ERR_PTR(-EINVAL);
vimc_sca_fill_src_frame(vsca, sink_frame);
- /* Propagate the frame through all source pads */
- for (i = 1; i < vsca->sd.entity.num_pads; i++) {
- struct media_pad *pad = &vsca->sd.entity.pads[i];
-
- vimc_propagate_frame(pad, vsca->src_frame);
- }
+ return vsca->src_frame;
};
static void vimc_sca_comp_unbind(struct device *comp, struct device *master,
--- a/drivers/media/platform/vimc/vimc-sensor.c
+++ b/drivers/media/platform/vimc/vimc-sensor.c
@@ -16,8 +16,6 @@
*/
#include <linux/component.h>
-#include <linux/freezer.h>
-#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/v4l2-mediabus.h>
@@ -197,38 +195,27 @@ static const struct v4l2_subdev_pad_ops
.set_fmt = vimc_sen_set_fmt,
};
-static int vimc_sen_tpg_thread(void *data)
+static void *vimc_sen_process_frame(struct vimc_ent_device *ved,
+ const void *sink_frame)
{
- struct vimc_sen_device *vsen = data;
- unsigned int i;
-
- set_freezable();
- set_current_state(TASK_UNINTERRUPTIBLE);
-
- for (;;) {
- try_to_freeze();
- if (kthread_should_stop())
- break;
-
- tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame);
-
- /* Send the frame to all source pads */
- for (i = 0; i < vsen->sd.entity.num_pads; i++)
- vimc_propagate_frame(&vsen->sd.entity.pads[i],
- vsen->frame);
+ struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device,
+ ved);
+ const struct vimc_pix_map *vpix;
+ unsigned int frame_size;
- /* 60 frames per second */
- schedule_timeout(HZ/60);
- }
+ /* Calculate the frame size */
+ vpix = vimc_pix_map_by_code(vsen->mbus_format.code);
+ frame_size = vsen->mbus_format.width * vpix->bpp *
+ vsen->mbus_format.height;
- return 0;
+ tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame);
+ return vsen->frame;
}
static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
{
struct vimc_sen_device *vsen =
container_of(sd, struct vimc_sen_device, sd);
- int ret;
if (enable) {
const struct vimc_pix_map *vpix;
@@ -254,26 +241,8 @@ static int vimc_sen_s_stream(struct v4l2
/* configure the test pattern generator */
vimc_sen_tpg_s_format(vsen);
- /* Initialize the image generator thread */
- vsen->kthread_sen = kthread_run(vimc_sen_tpg_thread, vsen,
- "%s-sen", vsen->sd.v4l2_dev->name);
- if (IS_ERR(vsen->kthread_sen)) {
- dev_err(vsen->dev, "%s: kernel_thread() failed\n",
- vsen->sd.name);
- vfree(vsen->frame);
- vsen->frame = NULL;
- return PTR_ERR(vsen->kthread_sen);
- }
} else {
- if (!vsen->kthread_sen)
- return 0;
-
- /* Stop image generator */
- ret = kthread_stop(vsen->kthread_sen);
- if (ret)
- return ret;
- vsen->kthread_sen = NULL;
vfree(vsen->frame);
vsen->frame = NULL;
return 0;
@@ -325,6 +294,7 @@ static int vimc_sen_comp_bind(struct dev
if (ret)
goto err_free_vsen;
+ vsen->ved.process_frame = vimc_sen_process_frame;
dev_set_drvdata(comp, &vsen->ved);
vsen->dev = comp;
--- /dev/null
+++ b/drivers/media/platform/vimc/vimc-streamer.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vimc-streamer.c Virtual Media Controller Driver
+ *
+ * Copyright (C) 2018 Lucas A. M. Magalhães <[email protected]>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+
+#include "vimc-streamer.h"
+
+/**
+ * vimc_get_source_entity - get the entity connected with the first sink pad
+ *
+ * @ent: reference media_entity
+ *
+ * Helper function that returns the media entity containing the source pad
+ * linked with the first sink pad from the given media entity pad list.
+ */
+static struct media_entity *vimc_get_source_entity(struct media_entity *ent)
+{
+ struct media_pad *pad;
+ int i;
+
+ for (i = 0; i < ent->num_pads; i++) {
+ if (ent->pads[i].flags & MEDIA_PAD_FL_SOURCE)
+ continue;
+ pad = media_entity_remote_pad(&ent->pads[i]);
+ return pad ? pad->entity : NULL;
+ }
+ return NULL;
+}
+
+/*
+ * vimc_streamer_pipeline_terminate - Disable stream in all ved in stream
+ *
+ * @stream: the pointer to the stream structure with the pipeline to be
+ * disabled.
+ *
+ * Calls s_stream to disable the stream in each entity of the pipeline
+ *
+ */
+static void vimc_streamer_pipeline_terminate(struct vimc_stream *stream)
+{
+ struct media_entity *entity;
+ struct v4l2_subdev *sd;
+
+ while (stream->pipe_size) {
+ stream->pipe_size--;
+ entity = stream->ved_pipeline[stream->pipe_size]->ent;
+ entity = vimc_get_source_entity(entity);
+ stream->ved_pipeline[stream->pipe_size] = NULL;
+
+ if (!is_media_entity_v4l2_subdev(entity))
+ continue;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ v4l2_subdev_call(sd, video, s_stream, 0);
+ }
+}
+
+/*
+ * vimc_streamer_pipeline_init - initializes the stream structure
+ *
+ * @stream: the pointer to the stream structure to be initialized
+ * @ved: the pointer to the vimc entity initializing the stream
+ *
+ * Initializes the stream structure. Walks through the entity graph to
+ * construct the pipeline used later on the streamer thread.
+ * Calls s_stream to enable stream in all entities of the pipeline.
+ */
+static int vimc_streamer_pipeline_init(struct vimc_stream *stream,
+ struct vimc_ent_device *ved)
+{
+ struct media_entity *entity;
+ struct video_device *vdev;
+ struct v4l2_subdev *sd;
+ int ret = 0;
+
+ stream->pipe_size = 0;
+ while (stream->pipe_size < VIMC_STREAMER_PIPELINE_MAX_SIZE) {
+ if (!ved) {
+ vimc_streamer_pipeline_terminate(stream);
+ return -EINVAL;
+ }
+ stream->ved_pipeline[stream->pipe_size++] = ved;
+
+ entity = vimc_get_source_entity(ved->ent);
+ /* Check if the end of the pipeline was reached*/
+ if (!entity)
+ return 0;
+
+ if (is_media_entity_v4l2_subdev(entity)) {
+ sd = media_entity_to_v4l2_subdev(entity);
+ ret = v4l2_subdev_call(sd, video, s_stream, 1);
+ if (ret && ret != -ENOIOCTLCMD) {
+ vimc_streamer_pipeline_terminate(stream);
+ return ret;
+ }
+ ved = v4l2_get_subdevdata(sd);
+ } else {
+ vdev = container_of(entity,
+ struct video_device,
+ entity);
+ ved = video_get_drvdata(vdev);
+ }
+ }
+
+ vimc_streamer_pipeline_terminate(stream);
+ return -EINVAL;
+}
+
+static int vimc_streamer_thread(void *data)
+{
+ struct vimc_stream *stream = data;
+ int i;
+
+ set_freezable();
+ set_current_state(TASK_UNINTERRUPTIBLE);
+
+ for (;;) {
+ try_to_freeze();
+ if (kthread_should_stop())
+ break;
+
+ for (i = stream->pipe_size - 1; i >= 0; i--) {
+ stream->frame = stream->ved_pipeline[i]->process_frame(
+ stream->ved_pipeline[i],
+ stream->frame);
+ if (!stream->frame)
+ break;
+ if (IS_ERR(stream->frame))
+ break;
+ }
+ //wait for 60hz
+ schedule_timeout(HZ / 60);
+ }
+
+ return 0;
+}
+
+int vimc_streamer_s_stream(struct vimc_stream *stream,
+ struct vimc_ent_device *ved,
+ int enable)
+{
+ int ret;
+
+ if (!stream || !ved)
+ return -EINVAL;
+
+ if (enable) {
+ if (stream->kthread)
+ return 0;
+
+ ret = vimc_streamer_pipeline_init(stream, ved);
+ if (ret)
+ return ret;
+
+ stream->kthread = kthread_run(vimc_streamer_thread, stream,
+ "vimc-streamer thread");
+
+ if (IS_ERR(stream->kthread))
+ return PTR_ERR(stream->kthread);
+
+ } else {
+ if (!stream->kthread)
+ return 0;
+
+ ret = kthread_stop(stream->kthread);
+ if (ret)
+ return ret;
+
+ stream->kthread = NULL;
+
+ vimc_streamer_pipeline_terminate(stream);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vimc_streamer_s_stream);
+
+MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Streamer");
+MODULE_AUTHOR("Lucas A. M. Magalhães <[email protected]>");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/media/platform/vimc/vimc-streamer.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * vimc-streamer.h Virtual Media Controller Driver
+ *
+ * Copyright (C) 2018 Lucas A. M. Magalhães <[email protected]>
+ *
+ */
+
+#ifndef _VIMC_STREAMER_H_
+#define _VIMC_STREAMER_H_
+
+#include <media/media-device.h>
+
+#include "vimc-common.h"
+
+#define VIMC_STREAMER_PIPELINE_MAX_SIZE 16
+
+struct vimc_stream {
+ struct media_pipeline pipe;
+ struct vimc_ent_device *ved_pipeline[VIMC_STREAMER_PIPELINE_MAX_SIZE];
+ unsigned int pipe_size;
+ u8 *frame;
+ struct task_struct *kthread;
+};
+
+/**
+ * vimc_streamer_s_streamer - start/stop the stream
+ *
+ * @stream: the pointer to the stream to start or stop
+ * @ved: The last entity of the streamer pipeline
+ * @enable: any non-zero number start the stream, zero stop
+ *
+ */
+int vimc_streamer_s_stream(struct vimc_stream *stream,
+ struct vimc_ent_device *ved,
+ int enable);
+
+#endif //_VIMC_STREAMER_H_
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 8127d82705998568b52ac724e28e00941538083d upstream.
If the I/O completion failed with a fatal error, then we should just
exit nfs_pageio_complete_mirror() rather than try to recoalesce.
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected] # v4.0+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/pagelist.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1213,7 +1213,7 @@ static void nfs_pageio_complete_mirror(s
desc->pg_mirror_idx = mirror_idx;
for (;;) {
nfs_pageio_doio(desc);
- if (!mirror->pg_recoalesce)
+ if (desc->pg_error < 0 || !mirror->pg_recoalesce)
break;
if (!nfs_do_recoalesce(desc))
break;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit f76a16adc485699f95bb71fce114f97c832fe664 upstream.
The .orc_unwind section is a packed array of 6-byte structs. It's
currently aligned to 6 bytes, which is causing warnings in the LLD
linker.
Six isn't a power of two, so it's not a valid alignment value. The
actual alignment doesn't matter much because it's an array of packed
structs. An alignment of two is sufficient. In reality it always gets
aligned to four bytes because it comes immediately after the
4-byte-aligned .orc_unwind_ip section.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reported-by: Nick Desaulniers <[email protected]>
Reported-by: Dmitry Golovin <[email protected]>
Reported-by: Sedat Dilek <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/218
Link: https://lkml.kernel.org/r/d55027ee95fe73e952dcd8be90aebd31b0095c45.1551892041.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/asm-generic/vmlinux.lds.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -696,7 +696,7 @@
KEEP(*(.orc_unwind_ip)) \
VMLINUX_SYMBOL(__stop_orc_unwind_ip) = .; \
} \
- . = ALIGN(6); \
+ . = ALIGN(2); \
.orc_unwind : AT(ADDR(.orc_unwind) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_orc_unwind) = .; \
KEEP(*(.orc_unwind)) \
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Machek <[email protected]>
commit fd10606f93a149a9f3d37574e5385b083b4a7b32 upstream.
The driver doesn't generate uevents on charger connect/disconnect.
This leads to UPower not detecting when AC is on or off... and that is
bad.
Reported by Arthur D. on github (
https://github.com/maemo-leste/bugtracker/issues/206 ), thanks to
Merlijn Wajer for suggesting a fix.
Cc: [email protected]
Signed-off-by: Pavel Machek <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/cpcap-charger.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -458,6 +458,7 @@ static void cpcap_usb_detect(struct work
goto out_err;
}
+ power_supply_changed(ddata->usb);
return;
out_err:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit cc5034a5d293dd620484d1d836aa16c6764a1c8c upstream.
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7")
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/evergreen_cs.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -1299,6 +1299,7 @@ static int evergreen_cs_handle_reg(struc
return -EINVAL;
}
ib[idx] += (u32)((reloc->gpu_offset >> 8) & 0xffffffff);
+ break;
case CB_TARGET_MASK:
track->cb_target_mask = radeon_get_ib_value(p, idx);
track->cb_dirty = true;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aditya Pakki <[email protected]>
commit e406f12dde1a8375d77ea02d91f313fb1a9c6aec upstream.
mddev->sync_thread can be set to NULL on kzalloc failure downstream.
The patch checks for such a scenario and frees allocated resources.
Committer node:
Added similar fix to raid5.c, as suggested by Guoqing.
Cc: [email protected] # v3.16+
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Aditya Pakki <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid10.c | 2 ++
drivers/md/raid5.c | 2 ++
2 files changed, 4 insertions(+)
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -3821,6 +3821,8 @@ static int raid10_run(struct mddev *mdde
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
"reshape");
+ if (!mddev->sync_thread)
+ goto out_free_conf;
}
return 0;
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7370,6 +7370,8 @@ static int raid5_run(struct mddev *mddev
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
"reshape");
+ if (!mddev->sync_thread)
+ goto abort;
}
/* Ok, everything is just fine now */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit e1359e2beb8b0a1188abc997273acbaedc8ee791 upstream.
The check to detect a wrap of the MMIO generation explicitly looks for a
generation number of zero. Now that unique memslots generation numbers
are assigned to each address space, only address space 0 will get a
generation number of exactly zero when wrapping. E.g. when address
space 1 goes from 0x7fffe to 0x80002, the MMIO generation number will
wrap to 0x2. Adjust the MMIO generation to strip the address space
modifier prior to checking for a wrap.
Fixes: 4bd518f1598d ("KVM: use separate generations for each address space")
Cc: <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -5420,11 +5420,28 @@ static bool kvm_has_zapped_obsolete_page
void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen)
{
+ gen &= MMIO_GEN_MASK;
+
+ /*
+ * Shift to eliminate the "update in-progress" flag, which isn't
+ * included in the spte's generation number.
+ */
+ gen >>= 1;
+
+ /*
+ * Generation numbers are incremented in multiples of the number of
+ * address spaces in order to provide unique generations across all
+ * address spaces. Strip what is effectively the address space
+ * modifier prior to checking for a wrap of the MMIO generation so
+ * that a wrap in any address space is detected.
+ */
+ gen &= ~((u64)KVM_ADDRESS_SPACE_NUM - 1);
+
/*
- * The very rare case: if the generation-number is round,
+ * The very rare case: if the MMIO generation number has wrapped,
* zap all shadow pages.
*/
- if (unlikely((gen & MMIO_GEN_MASK) == 0)) {
+ if (unlikely(gen == 0)) {
kvm_debug_ratelimited("kvm: zapping shadow pages for mmio generation wraparound\n");
kvm_mmu_invalidate_zap_all_pages(kvm);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit 946c522b603f281195af1df91837a1d4d1eb3bc9 upstream.
The VMCS.EXIT_QUALIFCATION field reports the displacements of memory
operands for various instructions, including VMX instructions, as a
naturally sized unsigned value, but masks the value by the addr size,
e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is
reported as 0xffffffd8 for a 32-bit address size. Despite some weird
wording regarding sign extension, the SDM explicitly states that bits
beyond the instructions address size are undefined:
In all cases, bits of this field beyond the instruction’s address
size are undefined.
Failure to sign extend the displacement results in KVM incorrectly
treating a negative displacement as a large positive displacement when
the address size of the VMX instruction is smaller than KVM's native
size, e.g. a 32-bit address size on a 64-bit KVM.
The very original decoding, added by commit 064aea774768 ("KVM: nVMX:
Decoding memory operands of VMX instructions"), sort of modeled sign
extension by truncating the final virtual/linear address for a 32-bit
address size. I.e. it messed up the effective address but made it work
by adjusting the final address.
When segmentation checks were added, the truncation logic was kept
as-is and no sign extension logic was introduced. In other words, it
kept calculating the wrong effective address while mostly generating
the correct virtual/linear address. As the effective address is what's
used in the segment limit checks, this results in KVM incorreclty
injecting #GP/#SS faults due to non-existent segment violations when
a nested VMM uses negative displacements with an address size smaller
than KVM's native address size.
Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in
KVM using 0x100000fd8 as the effective address when checking for a
segment limit violation. This causes a 100% failure rate when running
a 32-bit KVM build as L1 on top of a 64-bit KVM L0.
Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7446,6 +7446,10 @@ static int get_vmx_mem_address(struct kv
/* Addr = segment_base + offset */
/* offset = base + [index * scale] + displacement */
off = exit_qualification; /* holds the displacement */
+ if (addr_size == 1)
+ off = (gva_t)sign_extend64(off, 31);
+ else if (addr_size == 0)
+ off = (gva_t)sign_extend64(off, 15);
if (base_is_valid)
off += kvm_register_read(vcpu, base_reg);
if (index_is_valid)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang, Jun <[email protected]>
commit 1d1f898df6586c5ea9aeaf349f13089c6fa37903 upstream.
The rcu_gp_kthread_wake() function is invoked when it might be necessary
to wake the RCU grace-period kthread. Because self-wakeups are normally
a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from
this kthread, it naturally refuses to do the wakeup.
Unfortunately, natural though it might be, this heuristic fails when
rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler
that interrupted the grace-period kthread just after the final check of
the wait-event condition but just before the schedule() call. In this
case, a wakeup is required, even though the call to rcu_gp_kthread_wake()
is within the RCU grace-period kthread's context. Failing to provide
this wakeup can result in grace periods failing to start, which in turn
results in out-of-memory conditions.
This race window is quite narrow, but it actually did happen during real
testing. It would of course need to be fixed even if it was strictly
theoretical in nature.
This patch does not Cc stable because it does not apply cleanly to
earlier kernel versions.
Fixes: 48a7639ce80c ("rcu: Make callers awaken grace-period kthread")
Reported-by: "He, Bo" <[email protected]>
Co-developed-by: "Zhang, Jun" <[email protected]>
Co-developed-by: "He, Bo" <[email protected]>
Co-developed-by: "xiao, jin" <[email protected]>
Co-developed-by: Bai, Jie A <[email protected]>
Signed-off: "Zhang, Jun" <[email protected]>
Signed-off: "He, Bo" <[email protected]>
Signed-off: "xiao, jin" <[email protected]>
Signed-off: Bai, Jie A <[email protected]>
Signed-off-by: "Zhang, Jun" <[email protected]>
[ paulmck: Switch from !in_softirq() to "!in_interrupt() &&
!in_serving_softirq() to avoid redundant wakeups and to also handle the
interrupt-handler scenario as well as the softirq-handler scenario that
actually occurred in testing. ]
Signed-off-by: Paul E. McKenney <[email protected]>
Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/rcu/tree.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1789,15 +1789,23 @@ static int rcu_future_gp_cleanup(struct
}
/*
- * Awaken the grace-period kthread for the specified flavor of RCU.
- * Don't do a self-awaken, and don't bother awakening when there is
- * nothing for the grace-period kthread to do (as in several CPUs
- * raced to awaken, and we lost), and finally don't try to awaken
- * a kthread that has not yet been created.
+ * Awaken the grace-period kthread. Don't do a self-awaken (unless in
+ * an interrupt or softirq handler), and don't bother awakening when there
+ * is nothing for the grace-period kthread to do (as in several CPUs raced
+ * to awaken, and we lost), and finally don't try to awaken a kthread that
+ * has not yet been created. If all those checks are passed, track some
+ * debug information and awaken.
+ *
+ * So why do the self-wakeup when in an interrupt or softirq handler
+ * in the grace-period kthread's context? Because the kthread might have
+ * been interrupted just as it was going to sleep, and just after the final
+ * pre-sleep check of the awaken condition. In this case, a wakeup really
+ * is required, and is therefore supplied.
*/
static void rcu_gp_kthread_wake(struct rcu_state *rsp)
{
- if (current == rsp->gp_kthread ||
+ if ((current == rsp->gp_kthread &&
+ !in_interrupt() && !in_serving_softirq()) ||
!READ_ONCE(rsp->gp_flags) ||
!rsp->gp_kthread)
return;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit 34333cc6c2cb021662fd32e24e618d1b86de95bf upstream.
Regarding segments with a limit==0xffffffff, the SDM officially states:
When the effective limit is FFFFFFFFH (4 GBytes), these accesses may
or may not cause the indicated exceptions. Behavior is
implementation-specific and may vary from one execution to another.
In practice, all CPUs that support VMX ignore limit checks for "flat
segments", i.e. an expand-up data or code segment with base=0 and
limit=0xffffffff. This is subtly different than wrapping the effective
address calculation based on the address size, as the flat segment
behavior also applies to accesses that would wrap the 4g boundary, e.g.
a 4-byte access starting at 0xffffffff will access linear addresses
0xffffffff, 0x0, 0x1 and 0x2.
Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7513,10 +7513,16 @@ static int get_vmx_mem_address(struct kv
/* Protected mode: #GP(0)/#SS(0) if the segment is unusable.
*/
exn = (s.unusable != 0);
- /* Protected mode: #GP(0)/#SS(0) if the memory
- * operand is outside the segment limit.
+
+ /*
+ * Protected mode: #GP(0)/#SS(0) if the memory operand is
+ * outside the segment limit. All CPUs that support VMX ignore
+ * limit checks for flat segments, i.e. segments with base==0,
+ * limit==0xffffffff and of type expand-up data or code.
*/
- exn = exn || (off + sizeof(u64) > s.limit);
+ if (!(s.base == 0 && s.limit == 0xffffffff &&
+ ((s.type & 8) || !(s.type & 4))))
+ exn = exn || (off + sizeof(u64) > s.limit);
}
if (exn) {
kvm_queue_exception_e(vcpu,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit ddfd1730fd829743e41213e32ccc8b4aa6dc8325 upstream.
When installing new memslots, KVM sets bit 0 of the generation number to
indicate that an update is in-progress. Until the update is complete,
there are no guarantees as to whether a vCPU will see the old or the new
memslots. Explicity prevent caching MMIO accesses so as to avoid using
an access cached from the old memslots after the new memslots have been
installed.
Note that it is unclear whether or not disabling caching during the
update window is strictly necessary as there is no definitive
documentation as to what ordering guarantees KVM provides with respect
to updating memslots. That being said, the MMIO spte code does not
allow reusing sptes created while an update is in-progress, and the
associated documentation explicitly states:
We do not want to use an MMIO sptes created with an odd generation
number, ... If KVM is unlucky and creates an MMIO spte while the
low bit is 1, the next access to the spte will always be a cache miss.
At the very least, disabling the per-vCPU MMIO cache during updates will
make its behavior consistent with the MMIO spte behavior and
documentation.
Fixes: 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug")
Cc: <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -136,6 +136,11 @@ static inline bool emul_is_noncanonical_
static inline void vcpu_cache_mmio_info(struct kvm_vcpu *vcpu,
gva_t gva, gfn_t gfn, unsigned access)
{
+ u64 gen = kvm_memslots(vcpu->kvm)->generation;
+
+ if (unlikely(gen & 1))
+ return;
+
/*
* If this is a shadow nested page table, the "GVA" is
* actually a nGPA.
@@ -143,7 +148,7 @@ static inline void vcpu_cache_mmio_info(
vcpu->arch.mmio_gva = mmu_is_nested(vcpu) ? 0 : gva & PAGE_MASK;
vcpu->arch.access = access;
vcpu->arch.mmio_gfn = gfn;
- vcpu->arch.mmio_gen = kvm_memslots(vcpu->kvm)->generation;
+ vcpu->arch.mmio_gen = gen;
}
static inline bool vcpu_match_mmio_gen(struct kvm_vcpu *vcpu)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <[email protected]>
commit 152482580a1b0accb60676063a1ac57b2d12daf6 upstream.
kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound. x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.
Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots. Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.
Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()")
Cc: <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/kvm_host.h | 2 +-
arch/powerpc/include/asm/kvm_host.h | 2 +-
arch/s390/include/asm/kvm_host.h | 2 +-
arch/x86/include/asm/kvm_host.h | 2 +-
arch/x86/kvm/mmu.c | 4 ++--
arch/x86/kvm/x86.c | 4 ++--
include/linux/kvm_host.h | 2 +-
virt/kvm/arm/mmu.c | 2 +-
virt/kvm/kvm_main.c | 7 +++++--
9 files changed, 15 insertions(+), 12 deletions(-)
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -1132,7 +1132,7 @@ static inline void kvm_arch_hardware_uns
static inline void kvm_arch_sync_events(struct kvm *kvm) {}
static inline void kvm_arch_free_memslot(struct kvm *kvm,
struct kvm_memory_slot *free, struct kvm_memory_slot *dont) {}
-static inline void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots) {}
+static inline void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen) {}
static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -809,7 +809,7 @@ struct kvm_vcpu_arch {
static inline void kvm_arch_hardware_disable(void) {}
static inline void kvm_arch_hardware_unsetup(void) {}
static inline void kvm_arch_sync_events(struct kvm *kvm) {}
-static inline void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots) {}
+static inline void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen) {}
static inline void kvm_arch_flush_shadow_all(struct kvm *kvm) {}
static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
static inline void kvm_arch_exit(void) {}
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -784,7 +784,7 @@ static inline void kvm_arch_vcpu_uninit(
static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
static inline void kvm_arch_free_memslot(struct kvm *kvm,
struct kvm_memory_slot *free, struct kvm_memory_slot *dont) {}
-static inline void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots) {}
+static inline void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen) {}
static inline void kvm_arch_flush_shadow_all(struct kvm *kvm) {}
static inline void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
struct kvm_memory_slot *slot) {}
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1121,7 +1121,7 @@ void kvm_mmu_clear_dirty_pt_masked(struc
struct kvm_memory_slot *slot,
gfn_t gfn_offset, unsigned long mask);
void kvm_mmu_zap_all(struct kvm *kvm);
-void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, struct kvm_memslots *slots);
+void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen);
unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm);
void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages);
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -5418,13 +5418,13 @@ static bool kvm_has_zapped_obsolete_page
return unlikely(!list_empty_careful(&kvm->arch.zapped_obsolete_pages));
}
-void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, struct kvm_memslots *slots)
+void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen)
{
/*
* The very rare case: if the generation-number is round,
* zap all shadow pages.
*/
- if (unlikely((slots->generation & MMIO_GEN_MASK) == 0)) {
+ if (unlikely((gen & MMIO_GEN_MASK) == 0)) {
kvm_debug_ratelimited("kvm: zapping shadow pages for mmio generation wraparound\n");
kvm_mmu_invalidate_zap_all_pages(kvm);
}
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8524,13 +8524,13 @@ out_free:
return -ENOMEM;
}
-void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
+void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen)
{
/*
* memslots->generation has been incremented.
* mmio generation may have reached its maximum value.
*/
- kvm_mmu_invalidate_mmio_sptes(kvm, slots);
+ kvm_mmu_invalidate_mmio_sptes(kvm, gen);
}
int kvm_arch_prepare_memory_region(struct kvm *kvm,
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -625,7 +625,7 @@ void kvm_arch_free_memslot(struct kvm *k
struct kvm_memory_slot *dont);
int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
unsigned long npages);
-void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots);
+void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen);
int kvm_arch_prepare_memory_region(struct kvm *kvm,
struct kvm_memory_slot *memslot,
const struct kvm_userspace_memory_region *mem,
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -1955,7 +1955,7 @@ int kvm_arch_create_memslot(struct kvm *
return 0;
}
-void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
+void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen)
{
}
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -856,6 +856,7 @@ static struct kvm_memslots *install_new_
int as_id, struct kvm_memslots *slots)
{
struct kvm_memslots *old_memslots = __kvm_memslots(kvm, as_id);
+ u64 gen;
/*
* Set the low bit in the generation, which disables SPTE caching
@@ -878,9 +879,11 @@ static struct kvm_memslots *install_new_
* space 0 will use generations 0, 4, 8, ... while * address space 1 will
* use generations 2, 6, 10, 14, ...
*/
- slots->generation += KVM_ADDRESS_SPACE_NUM * 2 - 1;
+ gen = slots->generation + KVM_ADDRESS_SPACE_NUM * 2 - 1;
- kvm_arch_memslots_updated(kvm, slots);
+ kvm_arch_memslots_updated(kvm, gen);
+
+ slots->generation = gen;
return old_memslots;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve Longerbeam <[email protected]>
commit 4bc1ab41eee9d02ad2483bf8f51a7b72e3504eba upstream.
Move upstream stream off to just after receiving the last EOF completion
and disabling the CSI (and thus before disabling the IDMA channel) in
csi_stop(). For symmetry also move upstream stream on to beginning of
csi_start().
Doing this makes csi_s_stream() more symmetric with prp_s_stream() which
will require the same change to fix a hard lockup.
Signed-off-by: Steve Longerbeam <[email protected]>
Cc: [email protected] # for 4.13 and up
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/imx/imx-media-csi.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -648,10 +648,16 @@ static int csi_start(struct csi_priv *pr
usleep_range(delay_usec, delay_usec + 1000);
}
+ /* start upstream */
+ ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 1);
+ ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
+ if (ret)
+ return ret;
+
if (priv->dest == IPU_CSI_DEST_IDMAC) {
ret = csi_idmac_start(priv);
if (ret)
- return ret;
+ goto stop_upstream;
}
ret = csi_setup(priv);
@@ -679,6 +685,8 @@ fim_off:
idmac_stop:
if (priv->dest == IPU_CSI_DEST_IDMAC)
csi_idmac_stop(priv);
+stop_upstream:
+ v4l2_subdev_call(priv->src_sd, video, s_stream, 0);
return ret;
}
@@ -694,6 +702,9 @@ static void csi_stop(struct csi_priv *pr
*/
ipu_csi_disable(priv->csi);
+ /* stop upstream */
+ v4l2_subdev_call(priv->src_sd, video, s_stream, 0);
+
if (priv->dest == IPU_CSI_DEST_IDMAC) {
csi_idmac_stop(priv);
@@ -861,23 +872,13 @@ static int csi_s_stream(struct v4l2_subd
goto update_count;
if (enable) {
- /* upstream must be started first, before starting CSI */
- ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 1);
- ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
- if (ret)
- goto out;
-
dev_dbg(priv->dev, "stream ON\n");
ret = csi_start(priv);
- if (ret) {
- v4l2_subdev_call(priv->src_sd, video, s_stream, 0);
+ if (ret)
goto out;
- }
} else {
dev_dbg(priv->dev, "stream OFF\n");
- /* CSI must be stopped first, then stop upstream */
csi_stop(priv);
- v4l2_subdev_call(priv->src_sd, video, s_stream, 0);
}
update_count:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sakari Ailus <[email protected]>
commit 9dd0627d8d62a7ddb001a75f63942d92b5336561 upstream.
The UVC video driver converts the timestamp from hardware specific unit
to one known by the kernel at the time when the buffer is dequeued. This
is fine in general, but the streamoff operation consists of the
following steps (among other things):
1. uvc_video_clock_cleanup --- the hardware clock sample array is
released and the pointer to the array is set to NULL,
2. buffers in active state are returned to the user and
3. buf_finish callback is called on buffers that are prepared.
buf_finish includes calling uvc_video_clock_update that accesses the
hardware clock sample array.
The above is serialised by a queue specific mutex. Address the problem
by skipping the clock conversion if the hardware clock sample array is
already released.
Fixes: 9c0863b1cc48 ("[media] vb2: call buf_finish from __queue_cancel")
Reported-by: Chiranjeevi Rapolu <[email protected]>
Tested-by: Chiranjeevi Rapolu <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Cc: [email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/uvc/uvc_video.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -638,6 +638,14 @@ void uvc_video_clock_update(struct uvc_s
if (!uvc_hw_timestamps_param)
return;
+ /*
+ * We will get called from __vb2_queue_cancel() if there are buffers
+ * done but not dequeued by the user, but the sample array has already
+ * been released at that time. Just bail out in that case.
+ */
+ if (!clock->samples)
+ return;
+
spin_lock_irqsave(&clock->lock, flags);
if (clock->count < clock->size)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve Longerbeam <[email protected]>
commit a19c22677377b87e4354f7306f46ad99bc982a9f upstream.
Upstream must be stopped immediately after receiving the last EOF and
before disabling the IDMA channel. This can be accomplished by moving
upstream stream off to just after receiving the last EOF completion in
prp_stop(). For symmetry also move upstream stream on to end of
prp_start().
This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:
while true; do v4l2-ctl -d1 --stream-mmap --stream-count=3; done
Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.
The lockup occurs when disabling the IDMA channel at stream off. Stopping
the video data stream entering the IDMA channel before disabling the
channel itself appears to be a reliable fix for the hard lockup.
Fixes: f0d9c8924e2c3 ("[media] media: imx: Add IC subdev drivers")
Reported-by: Gaël PORTAY <[email protected]>
Tested-by: Gaël PORTAY <[email protected]>
Signed-off-by: Steve Longerbeam <[email protected]>
Cc: [email protected] # for 4.13 and up
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/imx/imx-ic-prpencvf.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
--- a/drivers/staging/media/imx/imx-ic-prpencvf.c
+++ b/drivers/staging/media/imx/imx-ic-prpencvf.c
@@ -676,12 +676,23 @@ static int prp_start(struct prp_priv *pr
goto out_free_nfb4eof_irq;
}
+ /* start upstream */
+ ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 1);
+ ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
+ if (ret) {
+ v4l2_err(&ic_priv->sd,
+ "upstream stream on failed: %d\n", ret);
+ goto out_free_eof_irq;
+ }
+
/* start the EOF timeout timer */
mod_timer(&priv->eof_timeout_timer,
jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
return 0;
+out_free_eof_irq:
+ devm_free_irq(ic_priv->dev, priv->eof_irq, priv);
out_free_nfb4eof_irq:
devm_free_irq(ic_priv->dev, priv->nfb4eof_irq, priv);
out_unsetup:
@@ -713,6 +724,12 @@ static void prp_stop(struct prp_priv *pr
if (ret == 0)
v4l2_warn(&ic_priv->sd, "wait last EOF timeout\n");
+ /* stop upstream */
+ ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 0);
+ if (ret && ret != -ENOIOCTLCMD)
+ v4l2_warn(&ic_priv->sd,
+ "upstream stream off failed: %d\n", ret);
+
devm_free_irq(ic_priv->dev, priv->eof_irq, priv);
devm_free_irq(ic_priv->dev, priv->nfb4eof_irq, priv);
@@ -1144,15 +1161,6 @@ static int prp_s_stream(struct v4l2_subd
if (ret)
goto out;
- /* start/stop upstream */
- ret = v4l2_subdev_call(priv->src_sd, video, s_stream, enable);
- ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
- if (ret) {
- if (enable)
- prp_stop(priv);
- goto out;
- }
-
update_count:
priv->stream_count += enable ? 1 : -1;
if (priv->stream_count < 0)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 1fad17fb1bbcd73159c2b992668a6957ecc5af8a upstream.
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.
To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().
Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.
Signed-off-by: Viresh Kumar <[email protected]>
Cc: 4.4+ <[email protected]> # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/wakeup.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -113,7 +113,6 @@ void wakeup_source_drop(struct wakeup_so
if (!ws)
return;
- del_timer_sync(&ws->timer);
__pm_relax(ws);
}
EXPORT_SYMBOL_GPL(wakeup_source_drop);
@@ -201,6 +200,13 @@ void wakeup_source_remove(struct wakeup_
list_del_rcu(&ws->entry);
spin_unlock_irqrestore(&events_lock, flags);
synchronize_srcu(&wakeup_srcu);
+
+ del_timer_sync(&ws->timer);
+ /*
+ * Clear timer.function to make wakeup_source_not_registered() treat
+ * this wakeup source as not registered.
+ */
+ ws->timer.function = NULL;
}
EXPORT_SYMBOL_GPL(wakeup_source_remove);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: J. Bruce Fields <[email protected]>
commit 3815a245b50124f0865415dcb606a034e97494d4 upstream.
In the case when we're reusing a superblock, selinux_sb_clone_mnt_opts()
fails to set set_kern_flags, with the result that
nfs_clone_sb_security() incorrectly clears NFS_CAP_SECURITY_LABEL.
The result is that if you mount the same NFS filesystem twice, NFS
security labels are turned off, even if they would work fine if you
mounted the filesystem only once.
("fixes" may be not exactly the right tag, it may be more like
"fixed-other-cases-but-missed-this-one".)
Cc: Scott Mayhew <[email protected]>
Cc: [email protected]
Fixes: 0b4d3452b8b4 "security/selinux: allow security_sb_clone_mnt_opts..."
Signed-off-by: J. Bruce Fields <[email protected]>
Acked-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/hooks.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1000,8 +1000,11 @@ static int selinux_sb_clone_mnt_opts(con
BUG_ON(!(oldsbsec->flags & SE_SBINITIALIZED));
/* if fs is reusing a sb, make sure that the contexts match */
- if (newsbsec->flags & SE_SBINITIALIZED)
+ if (newsbsec->flags & SE_SBINITIALIZED) {
+ if ((kern_flags & SECURITY_LSM_NATIVE_LABELS) && !set_context)
+ *set_kern_flags |= SECURITY_LSM_NATIVE_LABELS;
return selinux_cmp_sb_context(oldsb, newsb);
+ }
mutex_lock(&newsbsec->lock);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aneesh Kumar K.V <[email protected]>
commit 35f2806b481f5b9207f25e1886cba5d1c4d12cc7 upstream.
We added runtime allocation of 16G pages in commit 4ae279c2c96a
("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") That was done
to enable 16G allocation on PowerNV and KVM config. In case of KVM
config, we mostly would have the entire guest RAM backed by 16G
hugetlb pages for this to work. PAPR do support partial backing of
guest RAM with hugepages via ibm,expected#pages node of memory node in
the device tree. This means rest of the guest RAM won't be backed by
16G contiguous pages in the host and hence a hash page table insertion
can fail in such case.
An example error message will look like
hash-mmu: mm: Hashing failure ! EA=0x7efc00000000 access=0x8000000000000006 current=readback
hash-mmu: trap=0x300 vsid=0x67af789 ssize=1 base psize=14 psize 14 pte=0xc000000400000386
readback[12260]: unhandled signal 7 at 00007efc00000000 nip 00000000100012d0 lr 000000001000127c code 2
This patch address that by preventing runtime allocation of 16G
hugepages in LPAR config. To allocate 16G hugetlb one need to kernel
command line hugepagesz=16G hugepages=<number of 16G pages>
With radix translation mode we don't run into this issue.
This change will prevent runtime allocation of 16G hugetlb pages on
kvm with hash translation mode. However, with the current upstream it
was observed that 16G hugetlbfs backed guest doesn't boot at all.
We observe boot failure with the below message:
[131354.647546] KVM: map_vrma at 0 failed, ret=-4
That means this patch is not resulting in an observable regression.
Once we fix the boot issue with 16G hugetlb backed memory, we need to
use ibm,expected#pages memory node attribute to indicate 16G page
reservation to the guest. This will also enable partial backing of
guest RAM with 16G pages.
Fixes: 4ae279c2c96a ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.")
Cc: [email protected] # v4.14+
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/book3s/64/hugetlb.h | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/powerpc/include/asm/book3s/64/hugetlb.h
+++ b/arch/powerpc/include/asm/book3s/64/hugetlb.h
@@ -55,6 +55,14 @@ static inline pte_t arch_make_huge_pte(p
#ifdef CONFIG_ARCH_HAS_GIGANTIC_PAGE
static inline bool gigantic_page_supported(void)
{
+ /*
+ * We used gigantic page reservation with hypervisor assist in some case.
+ * We cannot use runtime allocation of gigantic pages in those platforms
+ * This is hash translation mode LPARs.
+ */
+ if (firmware_has_feature(FW_FEATURE_LPAR) && !radix_enabled())
+ return false;
+
return true;
}
#endif
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Cave-Ayland <[email protected]>
commit fe1ef6bcdb4fca33434256a802a3ed6aacf0bd2f upstream.
Commit 8792468da5e1 "powerpc: Add the ability to save FPU without
giving it up" unexpectedly removed the MSR_FE0 and MSR_FE1 bits from
the bitmask used to update the MSR of the previous thread in
__giveup_fpu() causing a KVM-PR MacOS guest to lockup and panic the
host kernel.
Leaving FE0/1 enabled means unrelated processes might receive FPEs
when they're not expecting them and crash. In particular if this
happens to init the host will then panic.
eg (transcribed):
qemu-system-ppc[837]: unhandled signal 8 at 12cc9ce4 nip 12cc9ce4 lr 12cc9ca4 code 0
systemd[1]: unhandled signal 8 at 202f02e0 nip 202f02e0 lr 001003d4 code 0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Reinstate these bits to the MSR bitmask to enable MacOS guests to run
under 32-bit KVM-PR once again without issue.
Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up")
Cc: [email protected] # v4.6+
Signed-off-by: Mark Cave-Ayland <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/process.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -156,7 +156,7 @@ void __giveup_fpu(struct task_struct *ts
save_fpu(tsk);
msr = tsk->thread.regs->msr;
- msr &= ~MSR_FP;
+ msr &= ~(MSR_FP|MSR_FE0|MSR_FE1);
#ifdef CONFIG_VSX
if (cpu_has_feature(CPU_FTR_VSX))
msr &= ~MSR_VSX;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren <[email protected]>
commit 5ae51d67aec95f6f9386aa8dd5db424964895575 upstream.
I noticed that modprobe clk-twl6040 can fail after a cold boot with:
abe_cm:clk:0010:0: failed to enable
...
Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20
WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24
...
(clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90)
(_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244)
(_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44)
(omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108)
(sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8)
(__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694)
(rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84)
(__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c)
(sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98)
After searching around for a similar issue, I came across an earlier fix
that never got merged upstream in the Android tree for glass-omap-xrr02.
There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata"
by Misael Lopez Cruz <[email protected]>.
Based on my observations, this fix is also needed when cold booting
devices, and not just for deeper idle modes. Since we now have a clock
driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare().
Cc: Misael Lopez Cruz <[email protected]>
Cc: Peter Ujfalusi <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk-twl6040.c | 53 ++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 51 insertions(+), 2 deletions(-)
--- a/drivers/clk/clk-twl6040.c
+++ b/drivers/clk/clk-twl6040.c
@@ -41,6 +41,43 @@ static int twl6040_pdmclk_is_prepared(st
return pdmclk->enabled;
}
+static int twl6040_pdmclk_reset_one_clock(struct twl6040_pdmclk *pdmclk,
+ unsigned int reg)
+{
+ const u8 reset_mask = TWL6040_HPLLRST; /* Same for HPPLL and LPPLL */
+ int ret;
+
+ ret = twl6040_set_bits(pdmclk->twl6040, reg, reset_mask);
+ if (ret < 0)
+ return ret;
+
+ ret = twl6040_clear_bits(pdmclk->twl6040, reg, reset_mask);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/*
+ * TWL6040A2 Phoenix Audio IC erratum #6: "PDM Clock Generation Issue At
+ * Cold Temperature". This affects cold boot and deeper idle states it
+ * seems. The workaround consists of resetting HPPLL and LPPLL.
+ */
+static int twl6040_pdmclk_quirk_reset_clocks(struct twl6040_pdmclk *pdmclk)
+{
+ int ret;
+
+ ret = twl6040_pdmclk_reset_one_clock(pdmclk, TWL6040_REG_HPPLLCTL);
+ if (ret)
+ return ret;
+
+ ret = twl6040_pdmclk_reset_one_clock(pdmclk, TWL6040_REG_LPPLLCTL);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int twl6040_pdmclk_prepare(struct clk_hw *hw)
{
struct twl6040_pdmclk *pdmclk = container_of(hw, struct twl6040_pdmclk,
@@ -48,8 +85,20 @@ static int twl6040_pdmclk_prepare(struct
int ret;
ret = twl6040_power(pdmclk->twl6040, 1);
- if (!ret)
- pdmclk->enabled = 1;
+ if (ret)
+ return ret;
+
+ ret = twl6040_pdmclk_quirk_reset_clocks(pdmclk);
+ if (ret)
+ goto out_err;
+
+ pdmclk->enabled = 1;
+
+ return 0;
+
+out_err:
+ dev_err(pdmclk->dev, "%s: error %i\n", __func__, ret);
+ twl6040_power(pdmclk->twl6040, 0);
return ret;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 36da5ff0bea2dc67298150ead8d8471575c54c7d upstream.
The 83xx has 8 SPRG registers and uses at least SPRG4
for DTLB handling LRU.
Fixes: 2319f1239592 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/83xx/suspend-asm.S | 34 +++++++++++++++++++++++-------
1 file changed, 27 insertions(+), 7 deletions(-)
--- a/arch/powerpc/platforms/83xx/suspend-asm.S
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -26,13 +26,13 @@
#define SS_MSR 0x74
#define SS_SDR1 0x78
#define SS_LR 0x7c
-#define SS_SPRG 0x80 /* 4 SPRGs */
-#define SS_DBAT 0x90 /* 8 DBATs */
-#define SS_IBAT 0xd0 /* 8 IBATs */
-#define SS_TB 0x110
-#define SS_CR 0x118
-#define SS_GPREG 0x11c /* r12-r31 */
-#define STATE_SAVE_SIZE 0x16c
+#define SS_SPRG 0x80 /* 8 SPRGs */
+#define SS_DBAT 0xa0 /* 8 DBATs */
+#define SS_IBAT 0xe0 /* 8 IBATs */
+#define SS_TB 0x120
+#define SS_CR 0x128
+#define SS_GPREG 0x12c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x17c
.section .data
.align 5
@@ -103,6 +103,16 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
stw r7, SS_SPRG+12(r3)
stw r8, SS_SDR1(r3)
+ mfspr r4, SPRN_SPRG4
+ mfspr r5, SPRN_SPRG5
+ mfspr r6, SPRN_SPRG6
+ mfspr r7, SPRN_SPRG7
+
+ stw r4, SS_SPRG+16(r3)
+ stw r5, SS_SPRG+20(r3)
+ stw r6, SS_SPRG+24(r3)
+ stw r7, SS_SPRG+28(r3)
+
mfspr r4, SPRN_DBAT0U
mfspr r5, SPRN_DBAT0L
mfspr r6, SPRN_DBAT1U
@@ -493,6 +503,16 @@ mpc83xx_deep_resume:
mtspr SPRN_IBAT7U, r6
mtspr SPRN_IBAT7L, r7
+ lwz r4, SS_SPRG+16(r3)
+ lwz r5, SS_SPRG+20(r3)
+ lwz r6, SS_SPRG+24(r3)
+ lwz r7, SS_SPRG+28(r3)
+
+ mtspr SPRN_SPRG4, r4
+ mtspr SPRN_SPRG5, r5
+ mtspr SPRN_SPRG6, r6
+ mtspr SPRN_SPRG7, r7
+
lwz r4, SS_SPRG+0(r3)
lwz r5, SS_SPRG+4(r3)
lwz r6, SS_SPRG+8(r3)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jordan Niethe <[email protected]>
commit 7b62f9bd2246b7d3d086e571397c14ba52645ef1 upstream.
Currently the opal log is globally readable. It is kernel policy to
limit the visibility of physical addresses / kernel pointers to root.
Given this and the fact the opal log may contain this information it
would be better to limit the readability to root.
Fixes: bfc36894a48b ("powerpc/powernv: Add OPAL message log interface")
Cc: [email protected] # v3.15+
Signed-off-by: Jordan Niethe <[email protected]>
Reviewed-by: Stewart Smith <[email protected]>
Reviewed-by: Andrew Donnellan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/powernv/opal-msglog.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/platforms/powernv/opal-msglog.c
+++ b/arch/powerpc/platforms/powernv/opal-msglog.c
@@ -98,7 +98,7 @@ static ssize_t opal_msglog_read(struct f
}
static struct bin_attribute opal_msglog_attr = {
- .attr = {.name = "msglog", .mode = 0444},
+ .attr = {.name = "msglog", .mode = 0400},
.read = opal_msglog_read
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vaibhav Jain <[email protected]>
commit edeb304f659792fb5bab90d7d6f3408b4c7301fb upstream.
Within cxl module, iteration over array 'adapter->afu' may be racy
at few points as it might be simultaneously read during an EEH and its
contents being set to NULL while driver is being unloaded or unbound
from the adapter. This might result in a NULL pointer to 'struct afu'
being de-referenced during an EEH thereby causing a kernel oops.
This patch fixes this by making sure that all access to the array
'adapter->afu' is wrapped within the context of spin-lock
'adapter->afu_list_lock'.
Fixes: 9e8df8a21963 ("cxl: EEH support")
Cc: [email protected] # v4.3+
Acked-by: Andrew Donnellan <[email protected]>
Acked-by: Frederic Barrat <[email protected]>
Acked-by: Christophe Lombard <[email protected]>
Signed-off-by: Vaibhav Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/cxl/guest.c | 2 ++
drivers/misc/cxl/pci.c | 39 ++++++++++++++++++++++++++++++---------
2 files changed, 32 insertions(+), 9 deletions(-)
--- a/drivers/misc/cxl/guest.c
+++ b/drivers/misc/cxl/guest.c
@@ -267,6 +267,7 @@ static int guest_reset(struct cxl *adapt
int i, rc;
pr_devel("Adapter reset request\n");
+ spin_lock(&adapter->afu_list_lock);
for (i = 0; i < adapter->slices; i++) {
if ((afu = adapter->afu[i])) {
pci_error_handlers(afu, CXL_ERROR_DETECTED_EVENT,
@@ -283,6 +284,7 @@ static int guest_reset(struct cxl *adapt
pci_error_handlers(afu, CXL_RESUME_EVENT, 0);
}
}
+ spin_unlock(&adapter->afu_list_lock);
return rc;
}
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -2050,7 +2050,7 @@ static pci_ers_result_t cxl_vphb_error_d
/* There should only be one entry, but go through the list
* anyway
*/
- if (afu->phb == NULL)
+ if (afu == NULL || afu->phb == NULL)
return result;
list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
@@ -2077,7 +2077,8 @@ static pci_ers_result_t cxl_pci_error_de
{
struct cxl *adapter = pci_get_drvdata(pdev);
struct cxl_afu *afu;
- pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET, afu_result;
+ pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET;
+ pci_ers_result_t afu_result = PCI_ERS_RESULT_NEED_RESET;
int i;
/* At this point, we could still have an interrupt pending.
@@ -2088,6 +2089,7 @@ static pci_ers_result_t cxl_pci_error_de
/* If we're permanently dead, give up. */
if (state == pci_channel_io_perm_failure) {
+ spin_lock(&adapter->afu_list_lock);
for (i = 0; i < adapter->slices; i++) {
afu = adapter->afu[i];
/*
@@ -2096,6 +2098,7 @@ static pci_ers_result_t cxl_pci_error_de
*/
cxl_vphb_error_detected(afu, state);
}
+ spin_unlock(&adapter->afu_list_lock);
return PCI_ERS_RESULT_DISCONNECT;
}
@@ -2177,11 +2180,17 @@ static pci_ers_result_t cxl_pci_error_de
* * In slot_reset, free the old resources and allocate new ones.
* * In resume, clear the flag to allow things to start.
*/
+
+ /* Make sure no one else changes the afu list */
+ spin_lock(&adapter->afu_list_lock);
+
for (i = 0; i < adapter->slices; i++) {
afu = adapter->afu[i];
- afu_result = cxl_vphb_error_detected(afu, state);
+ if (afu == NULL)
+ continue;
+ afu_result = cxl_vphb_error_detected(afu, state);
cxl_context_detach_all(afu);
cxl_ops->afu_deactivate_mode(afu, afu->current_mode);
pci_deconfigure_afu(afu);
@@ -2193,6 +2202,7 @@ static pci_ers_result_t cxl_pci_error_de
(result == PCI_ERS_RESULT_NEED_RESET))
result = PCI_ERS_RESULT_NONE;
}
+ spin_unlock(&adapter->afu_list_lock);
/* should take the context lock here */
if (cxl_adapter_context_lock(adapter) != 0)
@@ -2225,14 +2235,18 @@ static pci_ers_result_t cxl_pci_slot_res
*/
cxl_adapter_context_unlock(adapter);
+ spin_lock(&adapter->afu_list_lock);
for (i = 0; i < adapter->slices; i++) {
afu = adapter->afu[i];
+ if (afu == NULL)
+ continue;
+
if (pci_configure_afu(afu, adapter, pdev))
- goto err;
+ goto err_unlock;
if (cxl_afu_select_best_mode(afu))
- goto err;
+ goto err_unlock;
if (afu->phb == NULL)
continue;
@@ -2244,16 +2258,16 @@ static pci_ers_result_t cxl_pci_slot_res
ctx = cxl_get_context(afu_dev);
if (ctx && cxl_release_context(ctx))
- goto err;
+ goto err_unlock;
ctx = cxl_dev_context_init(afu_dev);
if (IS_ERR(ctx))
- goto err;
+ goto err_unlock;
afu_dev->dev.archdata.cxl_ctx = ctx;
if (cxl_ops->afu_check_and_enable(afu))
- goto err;
+ goto err_unlock;
afu_dev->error_state = pci_channel_io_normal;
@@ -2274,8 +2288,13 @@ static pci_ers_result_t cxl_pci_slot_res
result = PCI_ERS_RESULT_DISCONNECT;
}
}
+
+ spin_unlock(&adapter->afu_list_lock);
return result;
+err_unlock:
+ spin_unlock(&adapter->afu_list_lock);
+
err:
/* All the bits that happen in both error_detected and cxl_remove
* should be idempotent, so we don't need to worry about leaving a mix
@@ -2296,10 +2315,11 @@ static void cxl_pci_resume(struct pci_de
* This is not the place to be checking if everything came back up
* properly, because there's no return value: do that in slot_reset.
*/
+ spin_lock(&adapter->afu_list_lock);
for (i = 0; i < adapter->slices; i++) {
afu = adapter->afu[i];
- if (afu->phb == NULL)
+ if (afu == NULL || afu->phb == NULL)
continue;
list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
@@ -2308,6 +2328,7 @@ static void cxl_pci_resume(struct pci_de
afu_dev->driver->err_handler->resume(afu_dev);
}
}
+ spin_unlock(&adapter->afu_list_lock);
}
static const struct pci_error_handlers cxl_err_handler = {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Penyaev <[email protected]>
commit 401592d2e095947344e10ec0623adbcd58934dd4 upstream.
When VM_NO_GUARD is not set area->size includes adjacent guard page,
thus for correct size checking get_vm_area_size() should be used, but
not area->size.
This fixes possible kernel oops when userspace tries to mmap an area on
1 page bigger than was allocated by vmalloc_user() call: the size check
inside remap_vmalloc_range_partial() accounts non-existing guard page
also, so check successfully passes but vmalloc_to_page() returns NULL
(guard page does not physically exist).
The following code pattern example should trigger an oops:
static int oops_mmap(struct file *file, struct vm_area_struct *vma)
{
void *mem;
mem = vmalloc_user(4096);
BUG_ON(!mem);
/* Do not care about mem leak */
return remap_vmalloc_range(vma, mem, 0);
}
And userspace simply mmaps size + PAGE_SIZE:
mmap(NULL, 8192, PROT_WRITE|PROT_READ, MAP_PRIVATE, fd, 0);
Possible candidates for oops which do not have any explicit size
checks:
*** drivers/media/usb/stkwebcam/stk-webcam.c:
v4l_stk_mmap[789] ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
Or the following one:
*** drivers/video/fbdev/core/fbmem.c
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
...
res = fb->fb_mmap(info, vma);
Where fb_mmap callback calls remap_vmalloc_range() directly without any
explicit checks:
*** drivers/video/fbdev/vfb.c
static int vfb_mmap(struct fb_info *info,
struct vm_area_struct *vma)
{
return remap_vmalloc_range(vma, (void *)info->fix.smem_start, vma->vm_pgoff);
}
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Penyaev <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: "Luis R. Rodriguez" <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmalloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2262,7 +2262,7 @@ int remap_vmalloc_range_partial(struct v
if (!(area->flags & VM_USERMAP))
return -EINVAL;
- if (kaddr + size > area->addr + area->size)
+ if (kaddr + size > area->addr + get_vm_area_size(area))
return -EINVAL;
do {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit 01215d3edb0f384ddeaa5e4a22c1ae5ff634149f upstream.
The jh pointer may be used uninitialized in the two cases below and the
compiler complain about it when enabling JBUFFER_TRACE macro, fix them.
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jbd2/transaction.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1224,11 +1224,12 @@ int jbd2_journal_get_undo_access(handle_
struct journal_head *jh;
char *committed_data = NULL;
- JBUFFER_TRACE(jh, "entry");
if (jbd2_write_access_granted(handle, bh, true))
return 0;
jh = jbd2_journal_add_journal_head(bh);
+ JBUFFER_TRACE(jh, "entry");
+
/*
* Do this first --- it can drop the journal lock, so we want to
* make sure that obtaining the committed_data is done
@@ -1339,15 +1340,17 @@ int jbd2_journal_dirty_metadata(handle_t
if (is_handle_aborted(handle))
return -EROFS;
- if (!buffer_jbd(bh)) {
- ret = -EUCLEAN;
- goto out;
- }
+ if (!buffer_jbd(bh))
+ return -EUCLEAN;
+
/*
* We don't grab jh reference here since the buffer must be part
* of the running transaction.
*/
jh = bh2jh(bh);
+ jbd_debug(5, "journal_head %p\n", jh);
+ JBUFFER_TRACE(jh, "entry");
+
/*
* This and the following assertions are unreliable since we may see jh
* in inconsistent state unless we grab bh_state lock. But this is
@@ -1381,9 +1384,6 @@ int jbd2_journal_dirty_metadata(handle_t
}
journal = transaction->t_journal;
- jbd_debug(5, "journal_head %p\n", jh);
- JBUFFER_TRACE(jh, "entry");
-
jbd_lock_bh_state(bh);
if (jh->b_modified == 0) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Leroy <[email protected]>
commit 9bf3d3c4e4fd82c7174f4856df372ab2a71005b9 upstream.
Today's message is useless:
[ 42.253267] Kernel stack overflow in process (ptrval), r1=c65500b0
This patch fixes it:
[ 66.905235] Kernel stack overflow in process sh[356], r1=c65560b0
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: [email protected] # v4.15+
Signed-off-by: Christophe Leroy <[email protected]>
[mpe: Use task_pid_nr()]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/traps.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1292,8 +1292,8 @@ void slb_miss_bad_addr(struct pt_regs *r
void StackOverflow(struct pt_regs *regs)
{
- printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
- current, regs->gpr[1]);
+ pr_crit("Kernel stack overflow in process %s[%d], r1=%lx\n",
+ current->comm, task_pid_nr(current), regs->gpr[1]);
debugger(regs);
show_regs(regs);
panic("kernel stack overflow");
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <[email protected]>
commit bc5d922c93491878c44c9216e9d227c7eeb81d7f upstream.
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz.
This results in a theorical divider of 41.999993 which is then rounded
up to 42. The .round_rate function would then return (180 MHz / 42) as
the clock, rounded down, so 4.285714 MHz.
Calling clk_set_rate on 4.285714 MHz would round the rate again, and
give a theorical divider of 42,0000028, now rounded up to 43, and the
rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not
what we requested.
Fix this by rounding up the divisions.
Signed-off-by: Paul Cercueil <[email protected]>
Tested-by: Maarten ter Huurne <[email protected]>
Cc: <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/ingenic/cgu.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -364,16 +364,16 @@ ingenic_clk_round_rate(struct clk_hw *hw
struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
struct ingenic_cgu *cgu = ingenic_clk->cgu;
const struct ingenic_cgu_clk_info *clk_info;
- long rate = *parent_rate;
+ unsigned int div = 1;
clk_info = &cgu->clock_info[ingenic_clk->idx];
if (clk_info->type & CGU_CLK_DIV)
- rate /= ingenic_clk_calc_div(clk_info, *parent_rate, req_rate);
+ div = ingenic_clk_calc_div(clk_info, *parent_rate, req_rate);
else if (clk_info->type & CGU_CLK_FIXDIV)
- rate /= clk_info->fixdiv.div;
+ div = clk_info->fixdiv.div;
- return rate;
+ return DIV_ROUND_UP(*parent_rate, div);
}
static int
@@ -393,7 +393,7 @@ ingenic_clk_set_rate(struct clk_hw *hw,
if (clk_info->type & CGU_CLK_DIV) {
div = ingenic_clk_calc_div(clk_info, parent_rate, req_rate);
- rate = parent_rate / div;
+ rate = DIV_ROUND_UP(parent_rate, div);
if (rate != req_rate)
return -EINVAL;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Halil Pasic <[email protected]>
commit 3438b2c039b4bf26881786a1f3450f016d66ad11 upstream.
A queue with a capacity of zero is clearly not a valid virtio queue.
Some emulators report zero queue size if queried with an invalid queue
index. Instead of crashing in this case let us just return -ENOENT. To
make that work properly, let us fix the notifier cleanup logic as well.
Cc: [email protected]
Signed-off-by: Halil Pasic <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/virtio/virtio_ccw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -275,6 +275,8 @@ static void virtio_ccw_drop_indicators(s
{
struct virtio_ccw_vq_info *info;
+ if (!vcdev->airq_info)
+ return;
list_for_each_entry(info, &vcdev->virtqueues, node)
drop_airq_indicator(info->vq, vcdev->airq_info);
}
@@ -416,7 +418,7 @@ static int virtio_ccw_read_vq_conf(struc
ret = ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_READ_VQ_CONF);
if (ret)
return ret;
- return vcdev->config_block->num;
+ return vcdev->config_block->num ?: -ENOENT;
}
static void virtio_ccw_del_vq(struct virtqueue *vq, struct ccw1 *ccw)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jay Dolan <[email protected]>
commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream.
The four port Pericom chips have the fourth port at the wrong address.
Make use of quirk to fix it.
Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards")
Cc: stable <[email protected]>
Signed-off-by: Jay Dolan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 105 +++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2033,6 +2033,111 @@ static struct pci_serial_quirk pci_seria
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <[email protected]>
commit 6bd288569b50bc89fa5513031086746968f585cb upstream.
Debug exception handlers may be called for exceptions generated both by
user and kernel code. In many cases, this is checked explicitly, but
in other cases things either happen to work by happy accident or they
go slightly wrong. For example, executing 'brk #4' from userspace will
enter the kprobes code and be ignored, but the instruction will be
retried forever in userspace instead of delivering a SIGTRAP.
Fix this issue in the most stable-friendly fashion by simply adding
explicit checks of the triggering exception level to all of our debug
exception handlers.
Cc: <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/kgdb.c | 14 ++++++++++----
arch/arm64/kernel/probes/kprobes.c | 6 ++++++
2 files changed, 16 insertions(+), 4 deletions(-)
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -233,27 +233,33 @@ int kgdb_arch_handle_exception(int excep
static int kgdb_brk_fn(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
kgdb_handle_exception(1, SIGTRAP, 0, regs);
- return 0;
+ return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_brk_fn)
static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
compiled_break = 1;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
- return 0;
+ return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);
static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
{
- if (!kgdb_single_step)
+ if (user_mode(regs) || !kgdb_single_step)
return DBG_HOOK_ERROR;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
- return 0;
+ return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_step_brk_fn);
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -458,6 +458,9 @@ kprobe_single_step_handler(struct pt_reg
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
int retval;
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
/* return error if this is not our step */
retval = kprobe_ss_hit(kcb, instruction_pointer(regs));
@@ -474,6 +477,9 @@ kprobe_single_step_handler(struct pt_reg
int __kprobes
kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
kprobe_handler(regs);
return DBG_HOOK_HANDLED;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Varad Gautam <[email protected]>
commit 73052b0daee0b750b39af18460dfec683e4f5887 upstream.
d_delete only unhashes an entry if it is reached with
dentry->d_lockref.count != 1. Prior to commit 8ead9dd54716 ("devpts:
more pty driver interface cleanups"), d_delete was called on a dentry
from devpts_pty_kill with two references held, which would trigger the
unhashing, and the subsequent dputs would release it.
Commit 8ead9dd54716 reworked devpts_pty_kill to stop acquiring the second
reference from d_find_alias, and the d_delete call left the dentries
still on the hashed list without actually ever being dropped from dcache
before explicit cleanup. This causes the number of negative dentries for
devpts to pile up, and an `ls /dev/pts` invocation can take seconds to
return.
Provide always_delete_dentry() from simple_dentry_operations
as .d_delete for devpts, to make the dentry be dropped from dcache.
Without this cleanup, the number of dentries in /dev/pts/ can be grown
arbitrarily as:
`python -c 'import pty; pty.spawn(["ls", "/dev/pts"])'`
A systemtap probe on dcache_readdir to count d_subdirs shows this count
to increase with each pty spawn invocation above:
probe kernel.function("dcache_readdir") {
subdirs = &@cast($file->f_path->dentry, "dentry")->d_subdirs;
p = subdirs;
p = @cast(p, "list_head")->next;
i = 0
while (p != subdirs) {
p = @cast(p, "list_head")->next;
i = i+1;
}
printf("number of dentries: %d\n", i);
}
Fixes: 8ead9dd54716 ("devpts: more pty driver interface cleanups")
Signed-off-by: Varad Gautam <[email protected]>
Reported-by: Zheng Wang <[email protected]>
Reported-by: Brandon Schwartz <[email protected]>
Root-caused-by: Maximilian Heyne <[email protected]>
Root-caused-by: Nicolas Pernas Maradei <[email protected]>
CC: David Woodhouse <[email protected]>
CC: Maximilian Heyne <[email protected]>
CC: Stefan Nuernberger <[email protected]>
CC: Amit Shah <[email protected]>
CC: Linus Torvalds <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Al Viro <[email protected]>
CC: Christian Brauner <[email protected]>
CC: Eric W. Biederman <[email protected]>
CC: Matthew Wilcox <[email protected]>
CC: Eric Biggers <[email protected]>
CC: <[email protected]> # 4.9+
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/devpts/inode.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -439,6 +439,7 @@ devpts_fill_super(struct super_block *s,
s->s_blocksize_bits = 10;
s->s_magic = DEVPTS_SUPER_MAGIC;
s->s_op = &devpts_sops;
+ s->s_d_op = &simple_dentry_operations;
s->s_time_gran = 1;
error = -ENOMEM;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit a0873490660246db587849a9e172f2b7b21fa88a upstream.
We are holding a transaction handle when setting an acl, therefore we can
not allocate the xattr value buffer using GFP_KERNEL, as we could deadlock
if reclaim is triggered by the allocation, therefore setup a nofs context.
Fixes: 39a27ec1004e8 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
CC: [email protected] # 4.9+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/acl.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -22,6 +22,7 @@
#include <linux/posix_acl_xattr.h>
#include <linux/posix_acl.h>
#include <linux/sched.h>
+#include <linux/sched/mm.h>
#include <linux/slab.h>
#include "ctree.h"
@@ -89,8 +90,16 @@ static int __btrfs_set_acl(struct btrfs_
}
if (acl) {
+ unsigned int nofs_flag;
+
size = posix_acl_xattr_size(acl->a_count);
+ /*
+ * We're holding a transaction handle, so use a NOFS memory
+ * allocation context to avoid deadlock if reclaim happens.
+ */
+ nofs_flag = memalloc_nofs_save();
value = kmalloc(size, GFP_KERNEL);
+ memalloc_nofs_restore(nofs_flag);
if (!value) {
ret = -ENOMEM;
goto out;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit f96c3ac8dfc24b4e38fc4c2eba5fea2107b929d1 upstream.
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d66 "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1930,7 +1930,8 @@ retry:
le16_to_cpu(es->s_reserved_gdt_blocks);
n_group = n_desc_blocks * EXT4_DESC_PER_BLOCK(sb);
n_blocks_count = (ext4_fsblk_t)n_group *
- EXT4_BLOCKS_PER_GROUP(sb);
+ EXT4_BLOCKS_PER_GROUP(sb) +
+ le32_to_cpu(es->s_first_data_block);
n_group--; /* set to last group number */
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 9505b98ccddc454008ca7efff90044e3e857c827 upstream.
pxa_cpufreq_init_voltages() is marked __init but usually inlined into
the non-__init pxa_cpufreq_init() function. When building with clang,
it can stay as a standalone function in a discarded section, and produce
this warning:
WARNING: vmlinux.o(.text+0x616a00): Section mismatch in reference from the function pxa_cpufreq_init() to the function .init.text:pxa_cpufreq_init_voltages()
The function pxa_cpufreq_init() references
the function __init pxa_cpufreq_init_voltages().
This is often because pxa_cpufreq_init lacks a __init
annotation or the annotation of pxa_cpufreq_init_voltages is wrong.
Fixes: 50e77fcd790e ("ARM: pxa: remove __init from cpufreq_driver->init()")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
Cc: All applicable <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/pxa2xx-cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -192,7 +192,7 @@ static int pxa_cpufreq_change_voltage(co
return ret;
}
-static void __init pxa_cpufreq_init_voltages(void)
+static void pxa_cpufreq_init_voltages(void)
{
vcc_core = regulator_get(NULL, "vcc_core");
if (IS_ERR(vcc_core)) {
@@ -208,7 +208,7 @@ static int pxa_cpufreq_change_voltage(co
return 0;
}
-static void __init pxa_cpufreq_init_voltages(void) { }
+static void pxa_cpufreq_init_voltages(void) { }
#endif
static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: yangerkun <[email protected]>
commit abdc644e8cbac2e9b19763680e5a7cf9bab2bee7 upstream.
The reason is that while swapping two inode, we swap the flags too.
Some flags such as EXT4_JOURNAL_DATA_FL can really confuse the things
since we're not resetting the address operations structure. The
simplest way to keep things sane is to restrict the flags that can be
swapped.
Signed-off-by: yangerkun <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ext4.h | 3 +++
fs/ext4/ioctl.c | 6 +++++-
2 files changed, 8 insertions(+), 1 deletion(-)
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -426,6 +426,9 @@ struct flex_groups {
/* Flags that are appropriate for non-directories/regular files. */
#define EXT4_OTHER_FLMASK (EXT4_NODUMP_FL | EXT4_NOATIME_FL)
+/* The only flags that should be swapped */
+#define EXT4_FL_SHOULD_SWAP (EXT4_HUGE_FILE_FL | EXT4_EXTENTS_FL)
+
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 ext4_mask_flags(umode_t mode, __u32 flags)
{
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -61,6 +61,7 @@ static void swap_inode_data(struct inode
loff_t isize;
struct ext4_inode_info *ei1;
struct ext4_inode_info *ei2;
+ unsigned long tmp;
ei1 = EXT4_I(inode1);
ei2 = EXT4_I(inode2);
@@ -73,7 +74,10 @@ static void swap_inode_data(struct inode
swap(inode1->i_mtime, inode2->i_mtime);
memswap(ei1->i_data, ei2->i_data, sizeof(ei1->i_data));
- swap(ei1->i_flags, ei2->i_flags);
+ tmp = ei1->i_flags & EXT4_FL_SHOULD_SWAP;
+ ei1->i_flags = (ei2->i_flags & EXT4_FL_SHOULD_SWAP) |
+ (ei1->i_flags & ~EXT4_FL_SHOULD_SWAP);
+ ei2->i_flags = tmp | (ei2->i_flags & ~EXT4_FL_SHOULD_SWAP);
swap(ei1->i_disksize, ei2->i_disksize);
ext4_es_remove_extent(inode1, 0, EXT_MAX_BLOCKS);
ext4_es_remove_extent(inode2, 0, EXT_MAX_BLOCKS);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lubomir Rintel <[email protected]>
commit 607076a904c435f2677fadaadd4af546279db68b upstream.
It doesn't make sense and the USB core warns on each submit of such
URB, easily flooding the message buffer with tracebacks.
Analogous issue was fixed in regular libertas driver in commit 6528d8804780
("libertas: don't set URB_ZERO_PACKET on IN USB transfer").
Cc: [email protected]
Signed-off-by: Lubomir Rintel <[email protected]>
Reviewed-by: Steve deRosier <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
@@ -433,8 +433,6 @@ static int __if_usb_submit_rx_urb(struct
skb_tail_pointer(skb),
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp);
- cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
-
lbtf_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n",
cardp->rx_urb);
ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zev Weiss <[email protected]>
commit 8cf7630b29701d364f8df4a50e4f1f5e752b2778 upstream.
This bug has apparently existed since the introduction of this function
in the pre-git era (4500e91754d3 in Thomas Gleixner's history.git,
"[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of
neighbour sysctls.").
As a minimal fix we can simply duplicate the corresponding check in
do_proc_dointvec_conv().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Zev Weiss <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: <[email protected]> [2.6.2+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sysctl.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2530,7 +2530,16 @@ static int do_proc_dointvec_minmax_conv(
{
struct do_proc_dointvec_minmax_conv_param *param = data;
if (write) {
- int val = *negp ? -*lvalp : *lvalp;
+ int val;
+ if (*negp) {
+ if (*lvalp > (unsigned long) INT_MAX + 1)
+ return -EINVAL;
+ val = -*lvalp;
+ } else {
+ if (*lvalp > (unsigned long) INT_MAX)
+ return -EINVAL;
+ val = *lvalp;
+ }
if ((param->min && *param->min > val) ||
(param->max && *param->max < val))
return -EINVAL;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Shilovsky <[email protected]>
commit 6dfbd84684700cb58b34e8602c01c12f3d2595c8 upstream.
When we have a READ lease for a file and have just issued a write
operation to the server we need to purge the cache and set oplock/lease
level to NONE to avoid reading stale data. Currently we do that
only if a write operation succedeed thus not covering cases when
a request was sent to the server but a negative error code was
returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR).
Fix this by turning off caching regardless of the error code being
returned.
The patches fixes generic tests 075 and 112 from the xfs-tests.
Cc: <[email protected]>
Signed-off-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/file.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2889,14 +2889,16 @@ cifs_strict_writev(struct kiocb *iocb, s
* these pages but not on the region from pos to ppos+len-1.
*/
written = cifs_user_writev(iocb, from);
- if (written > 0 && CIFS_CACHE_READ(cinode)) {
+ if (CIFS_CACHE_READ(cinode)) {
/*
- * Windows 7 server can delay breaking level2 oplock if a write
- * request comes - break it on the client to prevent reading
- * an old data.
+ * We have read level caching and we have just sent a write
+ * request to the server thus making data in the cache stale.
+ * Zap the cache and set oplock/lease level to NONE to avoid
+ * reading stale data from the cache. All subsequent read
+ * operations will read new data from the server.
*/
cifs_zap_mapping(inode);
- cifs_dbg(FYI, "Set no oplock for inode=%p after a write operation\n",
+ cifs_dbg(FYI, "Set Oplock/Lease to NONE for inode=%p after write\n",
inode);
cinode->oplock = 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael J. Ruhl <[email protected]>
commit bc5add09764c123f58942a37c8335247e683d234 upstream.
When disabling and removing a receive context, it is possible for an
asynchronous event (i.e IRQ) to occur. Because of this, there is a race
between cleaning up the context, and the context being used by the
asynchronous event.
cpu 0 (context cleanup)
rc->ref_count-- (ref_count == 0)
hfi1_rcd_free()
cpu 1 (IRQ (with rcd index))
rcd_get_by_index()
lock
ref_count+++ <-- reference count race (WARNING)
return rcd
unlock
cpu 0
hfi1_free_ctxtdata() <-- incorrect free location
lock
remove rcd from array
unlock
free rcd
This race will cause the following WARNING trace:
WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
Call Trace:
dump_stack+0x19/0x1b
__warn+0xd8/0x100
warn_slowpath_null+0x1d/0x20
hfi1_rcd_get_by_index+0x84/0xa0 [hfi1]
is_rcv_urgent_int+0x24/0x90 [hfi1]
general_interrupt+0x1b6/0x210 [hfi1]
__handle_irq_event_percpu+0x44/0x1c0
handle_irq_event_percpu+0x32/0x80
handle_irq_event+0x3c/0x60
handle_edge_irq+0x7f/0x150
handle_irq+0xe4/0x1a0
do_IRQ+0x4d/0xf0
common_interrupt+0x162/0x162
The race can also lead to a use after free which could be similar to:
general protection fault: 0000 1 SMP
CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015
task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230
Call Trace:
? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1]
hfi1_aio_write+0xba/0x110 [hfi1]
do_sync_readv_writev+0x7b/0xd0
do_readv_writev+0xce/0x260
? handle_mm_fault+0x39d/0x9b0
? pick_next_task_fair+0x5f/0x1b0
? sched_clock_cpu+0x85/0xc0
? __schedule+0x13a/0x890
vfs_writev+0x35/0x60
SyS_writev+0x7f/0x110
system_call_fastpath+0x22/0x27
Use the appropriate kref API to verify access.
Reorder context cleanup to ensure context removal before cleanup occurs
correctly.
Cc: [email protected] # v4.14.0+
Fixes: f683c80ca68e ("IB/hfi1: Resolve kernel panics by reference counting receive contexts")
Reviewed-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hfi1/hfi.h | 2 +-
drivers/infiniband/hw/hfi1/init.c | 14 +++++++++-----
2 files changed, 10 insertions(+), 6 deletions(-)
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -1398,7 +1398,7 @@ void hfi1_init_pportdata(struct pci_dev
struct hfi1_devdata *dd, u8 hw_pidx, u8 port);
void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd);
int hfi1_rcd_put(struct hfi1_ctxtdata *rcd);
-void hfi1_rcd_get(struct hfi1_ctxtdata *rcd);
+int hfi1_rcd_get(struct hfi1_ctxtdata *rcd);
struct hfi1_ctxtdata *hfi1_rcd_get_by_index(struct hfi1_devdata *dd, u16 ctxt);
int handle_receive_interrupt(struct hfi1_ctxtdata *rcd, int thread);
int handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd, int thread);
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -215,12 +215,12 @@ static void hfi1_rcd_free(struct kref *k
struct hfi1_ctxtdata *rcd =
container_of(kref, struct hfi1_ctxtdata, kref);
- hfi1_free_ctxtdata(rcd->dd, rcd);
-
spin_lock_irqsave(&rcd->dd->uctxt_lock, flags);
rcd->dd->rcd[rcd->ctxt] = NULL;
spin_unlock_irqrestore(&rcd->dd->uctxt_lock, flags);
+ hfi1_free_ctxtdata(rcd->dd, rcd);
+
kfree(rcd);
}
@@ -243,10 +243,13 @@ int hfi1_rcd_put(struct hfi1_ctxtdata *r
* @rcd: pointer to an initialized rcd data structure
*
* Use this to get a reference after the init.
+ *
+ * Return : reflect kref_get_unless_zero(), which returns non-zero on
+ * increment, otherwise 0.
*/
-void hfi1_rcd_get(struct hfi1_ctxtdata *rcd)
+int hfi1_rcd_get(struct hfi1_ctxtdata *rcd)
{
- kref_get(&rcd->kref);
+ return kref_get_unless_zero(&rcd->kref);
}
/**
@@ -305,7 +308,8 @@ struct hfi1_ctxtdata *hfi1_rcd_get_by_in
spin_lock_irqsave(&dd->uctxt_lock, flags);
if (dd->rcd[ctxt]) {
rcd = dd->rcd[ctxt];
- hfi1_rcd_get(rcd);
+ if (!hfi1_rcd_get(rcd))
+ rcd = NULL;
}
spin_unlock_irqrestore(&dd->uctxt_lock, flags);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stuart Menefy <[email protected]>
commit d2f276c8d3c224d5b493c42b6cf006ae4e64fb1c upstream.
When shutting down the timer, ensure that after we have stopped the
timer any pending interrupts are cleared. This fixes a problem when
suspending, as interrupts are disabled before the timer is stopped,
so the timer interrupt may still be asserted, preventing the system
entering a low power state when the wfi is executed.
Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Cc: <[email protected]> # v4.3+
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clocksource/exynos_mct.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -411,6 +411,7 @@ static int set_state_shutdown(struct clo
mevt = container_of(evt, struct mct_clock_event_device, evt);
exynos4_mct_tick_stop(mevt);
+ exynos4_mct_tick_clear(mevt);
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu <[email protected]>
commit 0192e6535ebe9af68614198ced4fd6d37b778ebf upstream.
Prohibit probing on optprobe template code, since it is not
a code but a template instruction sequence. If we modify
this template, copied template must be broken.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrea Righi <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 9326638cbee2 ("kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation")
Link: http://lkml.kernel.org/r/154998787911.31052.15274376330136234452.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/kprobes/opt.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -141,6 +141,11 @@ asm (
void optprobe_template_func(void);
STACK_FRAME_NON_STANDARD(optprobe_template_func);
+NOKPROBE_SYMBOL(optprobe_template_func);
+NOKPROBE_SYMBOL(optprobe_template_entry);
+NOKPROBE_SYMBOL(optprobe_template_val);
+NOKPROBE_SYMBOL(optprobe_template_call);
+NOKPROBE_SYMBOL(optprobe_template_end);
#define TMPL_MOVE_IDX \
((long)&optprobe_template_val - (long)&optprobe_template_entry)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Zhang <[email protected]>
commit 0ab66b3c326ef8f77dae9f528118966365757c0c upstream.
If regulator DT node doesn't exist, its of_parse_cb callback
function isn't called. Then all values for DT properties are
filled with zero. This leads to wrong register update for
FPS and POK settings.
Signed-off-by: Jinyoung Park <[email protected]>
Signed-off-by: Mark Zhang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/max77620-regulator.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -1,7 +1,7 @@
/*
* Maxim MAX77620 Regulator driver
*
- * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2016-2018, NVIDIA CORPORATION. All rights reserved.
*
* Author: Mallikarjun Kasoju <[email protected]>
* Laxman Dewangan <[email protected]>
@@ -803,6 +803,14 @@ static int max77620_regulator_probe(stru
rdesc = &rinfo[id].desc;
pmic->rinfo[id] = &max77620_regs_info[id];
pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+ pmic->reg_pdata[id].active_fps_src = -1;
+ pmic->reg_pdata[id].active_fps_pd_slot = -1;
+ pmic->reg_pdata[id].active_fps_pu_slot = -1;
+ pmic->reg_pdata[id].suspend_fps_src = -1;
+ pmic->reg_pdata[id].suspend_fps_pd_slot = -1;
+ pmic->reg_pdata[id].suspend_fps_pu_slot = -1;
+ pmic->reg_pdata[id].power_ok = -1;
+ pmic->reg_pdata[id].ramp_rate_setting = -1;
ret = max77620_read_slew_rate(pmic, id);
if (ret < 0)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
commit 8e928218780e2f1cf2f5891c7575e8f0b284fcce upstream.
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and
shared extents") and by commit 808f80b46790f ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
echo "Dropping page cache..."
sysctl -q vm.drop_caches=1
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
umount /dev/sdc
When running the script we get the following output:
Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit
005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <[email protected]>
Fixes: 808f80b46790f ("Btrfs: update fix for read corruption of compressed and shared extents")
Fixes: 005efedf2c7d0 ("Btrfs: fix read corruption of compressed and shared extents")
Cc: [email protected] # 4.3+
Tested-by: Zygo Blaxell <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/extent_io.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3014,11 +3014,11 @@ static int __do_readpage(struct extent_i
*/
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) &&
prev_em_start && *prev_em_start != (u64)-1 &&
- *prev_em_start != em->orig_start)
+ *prev_em_start != em->start)
force_bio_submit = true;
if (prev_em_start)
- *prev_em_start = em->orig_start;
+ *prev_em_start = em->start;
free_extent_map(em);
em = NULL;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 71c190249f0ced5b26377ea6bf829ab3af77a40c ]
The intended optimization should be A ^ 0 = A, not A ^ -1 = A.
Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/netronome/nfp/bpf/jit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
index 239dfbe8a0a1..3105ee5bbf8e 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
@@ -1017,7 +1017,7 @@ static int xor_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
static int xor_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
{
- return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !~meta->insn.imm);
+ return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !meta->insn.imm);
}
static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ]
Newer ARC gcc handles lp_start, lp_end in a different way and doesn't
like them in the clobber list.
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/include/asm/uaccess.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index c9173c02081c..eabc3efa6c6d 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -207,7 +207,7 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
*/
"=&r" (tmp), "+r" (to), "+r" (from)
:
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return n;
}
@@ -433,7 +433,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
*/
"=&r" (tmp), "+r" (to), "+r" (from)
:
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return n;
}
@@ -653,7 +653,7 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
" .previous \n"
: "+r"(d_char), "+r"(res)
: "i"(0)
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return res;
}
@@ -686,7 +686,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
" .previous \n"
: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
: "g"(-EFAULT), "r"(count)
- : "lp_count", "lp_start", "lp_end", "memory");
+ : "lp_count", "memory");
return res;
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit ba7d7433a0e998c902132bd47330e355a1eaa894 upstream.
Some algorithms have a ->setkey() method that is not atomic, in the
sense that setting a key can fail after changes were already made to the
tfm context. In this case, if a key was already set the tfm can end up
in a state that corresponds to neither the old key nor the new key.
It's not feasible to make all ->setkey() methods atomic, especially ones
that have to key multiple sub-tfms. Therefore, make the crypto API set
CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a
key, to prevent the tfm from being used until a new key is set.
Note: we can't set CRYPTO_TFM_NEED_KEY for OPTIONAL_KEY algorithms, so
->setkey() for those must nevertheless be atomic. That's fine for now
since only the crc32 and crc32c algorithms set OPTIONAL_KEY, and it's
not intended that OPTIONAL_KEY be used much.
[Cc stable mainly because when introducing the NEED_KEY flag I changed
AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG
previously didn't have this problem. So these "incompletely keyed"
states became theoretically accessible via AF_ALG -- though, the
opportunities for causing real mischief seem pretty limited.]
Fixes: 9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ahash.c | 28 +++++++++++++++++++---------
crypto/shash.c | 18 +++++++++++++-----
2 files changed, 32 insertions(+), 14 deletions(-)
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -190,6 +190,21 @@ static int ahash_setkey_unaligned(struct
return ret;
}
+static int ahash_nosetkey(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ return -ENOSYS;
+}
+
+static void ahash_set_needkey(struct crypto_ahash *tfm)
+{
+ const struct hash_alg_common *alg = crypto_hash_alg_common(tfm);
+
+ if (tfm->setkey != ahash_nosetkey &&
+ !(alg->base.cra_flags & CRYPTO_ALG_OPTIONAL_KEY))
+ crypto_ahash_set_flags(tfm, CRYPTO_TFM_NEED_KEY);
+}
+
int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
{
@@ -201,20 +216,16 @@ int crypto_ahash_setkey(struct crypto_ah
else
err = tfm->setkey(tfm, key, keylen);
- if (err)
+ if (unlikely(err)) {
+ ahash_set_needkey(tfm);
return err;
+ }
crypto_ahash_clear_flags(tfm, CRYPTO_TFM_NEED_KEY);
return 0;
}
EXPORT_SYMBOL_GPL(crypto_ahash_setkey);
-static int ahash_nosetkey(struct crypto_ahash *tfm, const u8 *key,
- unsigned int keylen)
-{
- return -ENOSYS;
-}
-
static inline unsigned int ahash_align_buffer_size(unsigned len,
unsigned long mask)
{
@@ -483,8 +494,7 @@ static int crypto_ahash_init_tfm(struct
if (alg->setkey) {
hash->setkey = alg->setkey;
- if (!(alg->halg.base.cra_flags & CRYPTO_ALG_OPTIONAL_KEY))
- crypto_ahash_set_flags(hash, CRYPTO_TFM_NEED_KEY);
+ ahash_set_needkey(hash);
}
if (alg->export)
hash->export = alg->export;
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -53,6 +53,13 @@ static int shash_setkey_unaligned(struct
return err;
}
+static void shash_set_needkey(struct crypto_shash *tfm, struct shash_alg *alg)
+{
+ if (crypto_shash_alg_has_setkey(alg) &&
+ !(alg->base.cra_flags & CRYPTO_ALG_OPTIONAL_KEY))
+ crypto_shash_set_flags(tfm, CRYPTO_TFM_NEED_KEY);
+}
+
int crypto_shash_setkey(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
{
@@ -65,8 +72,10 @@ int crypto_shash_setkey(struct crypto_sh
else
err = shash->setkey(tfm, key, keylen);
- if (err)
+ if (unlikely(err)) {
+ shash_set_needkey(tfm, shash);
return err;
+ }
crypto_shash_clear_flags(tfm, CRYPTO_TFM_NEED_KEY);
return 0;
@@ -368,7 +377,8 @@ int crypto_init_shash_ops_async(struct c
crt->final = shash_async_final;
crt->finup = shash_async_finup;
crt->digest = shash_async_digest;
- crt->setkey = shash_async_setkey;
+ if (crypto_shash_alg_has_setkey(alg))
+ crt->setkey = shash_async_setkey;
crypto_ahash_set_flags(crt, crypto_shash_get_flags(shash) &
CRYPTO_TFM_NEED_KEY);
@@ -390,9 +400,7 @@ static int crypto_shash_init_tfm(struct
hash->descsize = alg->descsize;
- if (crypto_shash_alg_has_setkey(alg) &&
- !(alg->base.cra_flags & CRYPTO_ALG_OPTIONAL_KEY))
- crypto_shash_set_flags(hash, CRYPTO_TFM_NEED_KEY);
+ shash_set_needkey(hash, alg);
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream.
LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step
instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or
under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420
Arndale Octa board).
Cc: <[email protected]>
Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/s2mps11.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -376,7 +376,7 @@ static const struct regulator_desc s2mps
regulator_desc_s2mps11_ldo(32, STEP_50_MV),
regulator_desc_s2mps11_ldo(33, STEP_50_MV),
regulator_desc_s2mps11_ldo(34, STEP_50_MV),
- regulator_desc_s2mps11_ldo(35, STEP_50_MV),
+ regulator_desc_s2mps11_ldo(35, STEP_25_MV),
regulator_desc_s2mps11_ldo(36, STEP_50_MV),
regulator_desc_s2mps11_ldo(37, STEP_50_MV),
regulator_desc_s2mps11_ldo(38, STEP_50_MV),
@@ -386,8 +386,8 @@ static const struct regulator_desc s2mps
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
regulator_desc_s2mps11_buck67810(6, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_s2mps11_buck67810(7, MIN_600_MV, STEP_12_5_MV),
+ regulator_desc_s2mps11_buck67810(8, MIN_600_MV, STEP_12_5_MV),
regulator_desc_s2mps11_buck9,
regulator_desc_s2mps11_buck67810(10, MIN_750_MV, STEP_12_5_MV),
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 399504e21a10be16dd1408ba0147367d9d82a10c upstream.
same story as with last May fixes in sysfs (7b745a4e4051
"unfuck sysfs_mount()"); new_sb is left uninitialized
in case of early errors in kernfs_mount_ns() and papering
over it by treating any error from kernfs_mount_ns() as
equivalent to !new_ns ends up conflating the cases when
objects had never been transferred to a superblock with
ones when that has happened and resulting new superblock
had been dropped. Easily fixed (same way as in sysfs
case). Additionally, there's a superblock leak on
kernfs_node_dentry() failure *and* a dentry leak inside
kernfs_node_dentry() itself - the latter on probably
impossible errors, but the former not impossible to trigger
(as the matter of fact, injecting allocation failures
at that point *does* trigger it).
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/kernfs/mount.c | 8 ++++++--
kernel/cgroup/cgroup.c | 9 ++++++---
2 files changed, 12 insertions(+), 5 deletions(-)
--- a/fs/kernfs/mount.c
+++ b/fs/kernfs/mount.c
@@ -196,8 +196,10 @@ struct dentry *kernfs_node_dentry(struct
return dentry;
knparent = find_next_ancestor(kn, NULL);
- if (WARN_ON(!knparent))
+ if (WARN_ON(!knparent)) {
+ dput(dentry);
return ERR_PTR(-EINVAL);
+ }
do {
struct dentry *dtmp;
@@ -206,8 +208,10 @@ struct dentry *kernfs_node_dentry(struct
if (kn == knparent)
return dentry;
kntmp = find_next_ancestor(kn, knparent);
- if (WARN_ON(!kntmp))
+ if (WARN_ON(!kntmp)) {
+ dput(dentry);
return ERR_PTR(-EINVAL);
+ }
dtmp = lookup_one_len_unlocked(kntmp->name, dentry,
strlen(kntmp->name));
dput(dentry);
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -1942,7 +1942,7 @@ struct dentry *cgroup_do_mount(struct fi
struct cgroup_namespace *ns)
{
struct dentry *dentry;
- bool new_sb;
+ bool new_sb = false;
dentry = kernfs_mount(fs_type, flags, root->kf_root, magic, &new_sb);
@@ -1952,6 +1952,7 @@ struct dentry *cgroup_do_mount(struct fi
*/
if (!IS_ERR(dentry) && ns != &init_cgroup_ns) {
struct dentry *nsdentry;
+ struct super_block *sb = dentry->d_sb;
struct cgroup *cgrp;
mutex_lock(&cgroup_mutex);
@@ -1962,12 +1963,14 @@ struct dentry *cgroup_do_mount(struct fi
spin_unlock_irq(&css_set_lock);
mutex_unlock(&cgroup_mutex);
- nsdentry = kernfs_node_dentry(cgrp->kn, dentry->d_sb);
+ nsdentry = kernfs_node_dentry(cgrp->kn, sb);
dput(dentry);
+ if (IS_ERR(nsdentry))
+ deactivate_locked_super(sb);
dentry = nsdentry;
}
- if (IS_ERR(dentry) || !new_sb)
+ if (!new_sb)
cgroup_put(&root->cgrp);
return dentry;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6321aa197547da397753757bd84c6ce64b3e3d89 ]
clang warns about overflowing the data[] member in the struct pnpipehdr:
net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]
if (hdr->data[4] == PEP_IND_READY)
^ ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
u8 data[1];
Using a flexible array member at the end of the struct avoids the
warning, but since we cannot have a flexible array member inside
of the union, each index now has to be moved back by one, which
makes it a little uglier.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Rémi Denis-Courmont <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/phonet/pep.h | 5 +++--
net/phonet/pep.c | 32 ++++++++++++++++----------------
2 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/include/net/phonet/pep.h b/include/net/phonet/pep.h
index b669fe6dbc3b..98f31c7ea23d 100644
--- a/include/net/phonet/pep.h
+++ b/include/net/phonet/pep.h
@@ -63,10 +63,11 @@ struct pnpipehdr {
u8 state_after_reset; /* reset request */
u8 error_code; /* any response */
u8 pep_type; /* status indication */
- u8 data[1];
+ u8 data0; /* anything else */
};
+ u8 data[];
};
-#define other_pep_type data[1]
+#define other_pep_type data[0]
static inline struct pnpipehdr *pnp_hdr(struct sk_buff *skb)
{
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index e81537991ddf..bffcef58ebf5 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -132,7 +132,7 @@ static int pep_indicate(struct sock *sk, u8 id, u8 code,
ph->utid = 0;
ph->message_id = id;
ph->pipe_handle = pn->pipe_handle;
- ph->data[0] = code;
+ ph->error_code = code;
return pn_skb_send(sk, skb, NULL);
}
@@ -153,7 +153,7 @@ static int pipe_handler_request(struct sock *sk, u8 id, u8 code,
ph->utid = id; /* whatever */
ph->message_id = id;
ph->pipe_handle = pn->pipe_handle;
- ph->data[0] = code;
+ ph->error_code = code;
return pn_skb_send(sk, skb, NULL);
}
@@ -208,7 +208,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
struct pnpipehdr *ph;
struct sockaddr_pn dst;
u8 data[4] = {
- oph->data[0], /* PEP type */
+ oph->pep_type, /* PEP type */
code, /* error code, at an unusual offset */
PAD, PAD,
};
@@ -221,7 +221,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
ph->utid = oph->utid;
ph->message_id = PNS_PEP_CTRL_RESP;
ph->pipe_handle = oph->pipe_handle;
- ph->data[0] = oph->data[1]; /* CTRL id */
+ ph->data0 = oph->data[0]; /* CTRL id */
pn_skb_get_src_sockaddr(oskb, &dst);
return pn_skb_send(sk, skb, &dst);
@@ -272,17 +272,17 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
return -EINVAL;
hdr = pnp_hdr(skb);
- if (hdr->data[0] != PN_PEP_TYPE_COMMON) {
+ if (hdr->pep_type != PN_PEP_TYPE_COMMON) {
net_dbg_ratelimited("Phonet unknown PEP type: %u\n",
- (unsigned int)hdr->data[0]);
+ (unsigned int)hdr->pep_type);
return -EOPNOTSUPP;
}
- switch (hdr->data[1]) {
+ switch (hdr->data[0]) {
case PN_PEP_IND_FLOW_CONTROL:
switch (pn->tx_fc) {
case PN_LEGACY_FLOW_CONTROL:
- switch (hdr->data[4]) {
+ switch (hdr->data[3]) {
case PEP_IND_BUSY:
atomic_set(&pn->tx_credits, 0);
break;
@@ -292,7 +292,7 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
}
break;
case PN_ONE_CREDIT_FLOW_CONTROL:
- if (hdr->data[4] == PEP_IND_READY)
+ if (hdr->data[3] == PEP_IND_READY)
atomic_set(&pn->tx_credits, wake = 1);
break;
}
@@ -301,12 +301,12 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
case PN_PEP_IND_ID_MCFC_GRANT_CREDITS:
if (pn->tx_fc != PN_MULTI_CREDIT_FLOW_CONTROL)
break;
- atomic_add(wake = hdr->data[4], &pn->tx_credits);
+ atomic_add(wake = hdr->data[3], &pn->tx_credits);
break;
default:
net_dbg_ratelimited("Phonet unknown PEP indication: %u\n",
- (unsigned int)hdr->data[1]);
+ (unsigned int)hdr->data[0]);
return -EOPNOTSUPP;
}
if (wake)
@@ -318,7 +318,7 @@ static int pipe_rcv_created(struct sock *sk, struct sk_buff *skb)
{
struct pep_sock *pn = pep_sk(sk);
struct pnpipehdr *hdr = pnp_hdr(skb);
- u8 n_sb = hdr->data[0];
+ u8 n_sb = hdr->data0;
pn->rx_fc = pn->tx_fc = PN_LEGACY_FLOW_CONTROL;
__skb_pull(skb, sizeof(*hdr));
@@ -506,7 +506,7 @@ static int pep_connresp_rcv(struct sock *sk, struct sk_buff *skb)
return -ECONNREFUSED;
/* Parse sub-blocks */
- n_sb = hdr->data[4];
+ n_sb = hdr->data[3];
while (n_sb > 0) {
u8 type, buf[6], len = sizeof(buf);
const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -739,7 +739,7 @@ static int pipe_do_remove(struct sock *sk)
ph->utid = 0;
ph->message_id = PNS_PIPE_REMOVE_REQ;
ph->pipe_handle = pn->pipe_handle;
- ph->data[0] = PAD;
+ ph->data0 = PAD;
return pn_skb_send(sk, skb, NULL);
}
@@ -817,7 +817,7 @@ static struct sock *pep_sock_accept(struct sock *sk, int flags, int *errp,
peer_type = hdr->other_pep_type << 8;
/* Parse sub-blocks (options) */
- n_sb = hdr->data[4];
+ n_sb = hdr->data[3];
while (n_sb > 0) {
u8 type, buf[1], len = sizeof(buf);
const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -1109,7 +1109,7 @@ static int pipe_skb_send(struct sock *sk, struct sk_buff *skb)
ph->utid = 0;
if (pn->aligned) {
ph->message_id = PNS_PIPE_ALIGNED_DATA;
- ph->data[0] = 0; /* padding */
+ ph->data0 = 0; /* padding */
} else
ph->message_id = PNS_PIPE_DATA;
ph->pipe_handle = pn->pipe_handle;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit fa7d2e639cd90442d868dfc6ca1d4cc9d8bf206e upstream.
For recovery, where non-dax access is needed to a given physical address
range, and testing, allow the 'force_raw' attribute to override the
default establishment of a dev_pagemap.
Otherwise without this capability it is possible to end up with a
namespace that can not be activated due to corrupted info-block, and one
that can not be repaired due to a section collision.
Cc: <[email protected]>
Fixes: 004f1afbe199 ("libnvdimm, pmem: direct map legacy pmem by default")
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvdimm/namespace_devs.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -138,6 +138,7 @@ bool nd_is_uuid_unique(struct device *de
bool pmem_should_map_pages(struct device *dev)
{
struct nd_region *nd_region = to_nd_region(dev->parent);
+ struct nd_namespace_common *ndns = to_ndns(dev);
struct nd_namespace_io *nsio;
if (!IS_ENABLED(CONFIG_ZONE_DEVICE))
@@ -149,6 +150,9 @@ bool pmem_should_map_pages(struct device
if (is_nd_pfn(dev) || is_nd_btt(dev))
return false;
+ if (ndns->force_raw)
+ return false;
+
nsio = to_nd_namespace_io(dev);
if (region_intersects(nsio->res.start, resource_size(&nsio->res),
IORESOURCE_SYSTEM_RAM,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Schwidefsky <[email protected]>
commit 8727638426b0aea59d7f904ad8ddf483f9234f88 upstream.
The setup_lowcore() function creates a new prefix page for the boot CPU.
The PSW mask for the system_call, external interrupt, i/o interrupt and
the program check handler have the DAT bit set in this new prefix page.
At the time setup_lowcore is called the system still runs without virtual
address translation, the paging_init() function creates the kernel page
table and loads the CR13 with the kernel ASCE.
Any code between setup_lowcore() and the end of paging_init() that has
a BUG or WARN statement will create a program check that can not be
handled correctly as there is no kernel page table yet.
To allow early WARN statements initially setup the lowcore with DAT off
and set the DAT bit only after paging_init() has completed.
Cc: [email protected]
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/setup.c | 32 +++++++++++++++++++++++---------
1 file changed, 23 insertions(+), 9 deletions(-)
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -300,7 +300,7 @@ early_param("vmalloc", parse_vmalloc);
void *restart_stack __section(.data);
-static void __init setup_lowcore(void)
+static void __init setup_lowcore_dat_off(void)
{
struct lowcore *lc;
@@ -311,19 +311,16 @@ static void __init setup_lowcore(void)
lc = memblock_virt_alloc_low(sizeof(*lc), sizeof(*lc));
lc->restart_psw.mask = PSW_KERNEL_BITS;
lc->restart_psw.addr = (unsigned long) restart_int_handler;
- lc->external_new_psw.mask = PSW_KERNEL_BITS |
- PSW_MASK_DAT | PSW_MASK_MCHECK;
+ lc->external_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
lc->external_new_psw.addr = (unsigned long) ext_int_handler;
lc->svc_new_psw.mask = PSW_KERNEL_BITS |
- PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
+ PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
lc->svc_new_psw.addr = (unsigned long) system_call;
- lc->program_new_psw.mask = PSW_KERNEL_BITS |
- PSW_MASK_DAT | PSW_MASK_MCHECK;
+ lc->program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
- lc->io_new_psw.mask = PSW_KERNEL_BITS |
- PSW_MASK_DAT | PSW_MASK_MCHECK;
+ lc->io_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_MCHECK;
lc->io_new_psw.addr = (unsigned long) io_int_handler;
lc->clock_comparator = clock_comparator_max;
lc->kernel_stack = ((unsigned long) &init_thread_union)
@@ -391,6 +388,17 @@ static void __init setup_lowcore(void)
lowcore_ptr[0] = lc;
}
+static void __init setup_lowcore_dat_on(void)
+{
+ struct lowcore *lc;
+
+ lc = lowcore_ptr[0];
+ lc->external_new_psw.mask |= PSW_MASK_DAT;
+ lc->svc_new_psw.mask |= PSW_MASK_DAT;
+ lc->program_new_psw.mask |= PSW_MASK_DAT;
+ lc->io_new_psw.mask |= PSW_MASK_DAT;
+}
+
static struct resource code_resource = {
.name = "Kernel code",
.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
@@ -948,7 +956,7 @@ void __init setup_arch(char **cmdline_p)
#endif
setup_resources();
- setup_lowcore();
+ setup_lowcore_dat_off();
smp_fill_possible_mask();
cpu_detect_mhz_feature();
cpu_init();
@@ -961,6 +969,12 @@ void __init setup_arch(char **cmdline_p)
*/
paging_init();
+ /*
+ * After paging_init created the kernel page table, the new PSWs
+ * in lowcore can now run with DAT enabled.
+ */
+ setup_lowcore_dat_on();
+
/* Setup default console */
conmode_default();
set_preferred_console();
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 966d23a006ca7b44ac8cf4d0c96b19785e0c3da0 upstream.
The UEFI 2.7 specification sets expectations that the 'updating' flag is
eventually cleared. To date, the libnvdimm core has never adhered to
that protocol. The policy of the core matches the policy of other
multi-device info-block formats like MD-Software-RAID that expect
administrator intervention on inconsistent info-blocks, not automatic
invalidation.
However, some pre-boot environments may unfortunately attempt to "clean
up" the labels and invalidate a set when it fails to find at least one
"non-updating" label in the set. Clear the updating flag after set
updates to minimize the window of vulnerability to aggressive pre-boot
environments.
Ideally implementations would not write to the label area outside of
creating namespaces.
Note that this only minimizes the window, it does not close it as the
system can still crash while clearing the flag and the set can be
subsequently deleted / invalidated by the pre-boot environment.
Fixes: f524bf271a5c ("libnvdimm: write pmem label set")
Cc: <[email protected]>
Cc: Kelly Couch <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvdimm/label.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
--- a/drivers/nvdimm/label.c
+++ b/drivers/nvdimm/label.c
@@ -616,7 +616,7 @@ static const guid_t *to_abstraction_guid
static int __pmem_label_update(struct nd_region *nd_region,
struct nd_mapping *nd_mapping, struct nd_namespace_pmem *nspm,
- int pos)
+ int pos, unsigned long flags)
{
struct nd_namespace_common *ndns = &nspm->nsio.common;
struct nd_interleave_set *nd_set = nd_region->nd_set;
@@ -657,7 +657,7 @@ static int __pmem_label_update(struct nd
memcpy(nd_label->uuid, nspm->uuid, NSLABEL_UUID_LEN);
if (nspm->alt_name)
memcpy(nd_label->name, nspm->alt_name, NSLABEL_NAME_LEN);
- nd_label->flags = __cpu_to_le32(NSLABEL_FLAG_UPDATING);
+ nd_label->flags = __cpu_to_le32(flags);
nd_label->nlabel = __cpu_to_le16(nd_region->ndr_mappings);
nd_label->position = __cpu_to_le16(pos);
nd_label->isetcookie = __cpu_to_le64(cookie);
@@ -1111,13 +1111,13 @@ static int del_labels(struct nd_mapping
int nd_pmem_namespace_label_update(struct nd_region *nd_region,
struct nd_namespace_pmem *nspm, resource_size_t size)
{
- int i;
+ int i, rc;
for (i = 0; i < nd_region->ndr_mappings; i++) {
struct nd_mapping *nd_mapping = &nd_region->mapping[i];
struct nvdimm_drvdata *ndd = to_ndd(nd_mapping);
struct resource *res;
- int rc, count = 0;
+ int count = 0;
if (size == 0) {
rc = del_labels(nd_mapping, nspm->uuid);
@@ -1135,7 +1135,20 @@ int nd_pmem_namespace_label_update(struc
if (rc < 0)
return rc;
- rc = __pmem_label_update(nd_region, nd_mapping, nspm, i);
+ rc = __pmem_label_update(nd_region, nd_mapping, nspm, i,
+ NSLABEL_FLAG_UPDATING);
+ if (rc)
+ return rc;
+ }
+
+ if (size == 0)
+ return 0;
+
+ /* Clear the UPDATING flag per UEFI 2.7 expectations */
+ for (i = 0; i < nd_region->ndr_mappings; i++) {
+ struct nd_mapping *nd_mapping = &nd_region->mapping[i];
+
+ rc = __pmem_label_update(nd_region, nd_mapping, nspm, i, 0);
if (rc)
return rc;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e494239a007e601448110ac304fe055951f9de3b ]
There's a hardware bug which affects the HSDK platform, triggered by
micro-ops for auto-saving regfile on taken interrupt. The workaround is
to inhibit autosave.
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/Kconfig | 8 +++++
arch/arc/include/asm/entry-arcv2.h | 54 ++++++++++++++++++++++++++++++
arch/arc/kernel/entry-arcv2.S | 4 ++-
arch/arc/kernel/intc-arcv2.c | 2 ++
arch/arc/plat-hsdk/Kconfig | 1 +
5 files changed, 68 insertions(+), 1 deletion(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9d06c9478a0d..82050893d0b3 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -417,6 +417,14 @@ config ARC_HAS_ACCL_REGS
(also referred to as r58:r59). These can also be used by gcc as GPR so
kernel needs to save/restore per process
+config ARC_IRQ_NO_AUTOSAVE
+ bool "Disable hardware autosave regfile on interrupts"
+ default n
+ help
+ On HS cores, taken interrupt auto saves the regfile on stack.
+ This is programmable and can be optionally disabled in which case
+ software INTERRUPT_PROLOGUE/EPILGUE do the needed work
+
endif # ISA_ARCV2
endmenu # "ARC CPU Configuration"
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 257a68f3c2fe..9f581553dcc3 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -17,6 +17,33 @@
;
; Now manually save: r12, sp, fp, gp, r25
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+ st.as r9, [sp, -10] ; save r9 in it's final stack slot
+ sub sp, sp, 12 ; skip JLI, LDI, EI
+
+ PUSH lp_count
+ PUSHAX lp_start
+ PUSHAX lp_end
+ PUSH blink
+
+ PUSH r11
+ PUSH r10
+
+ sub sp, sp, 4 ; skip r9
+
+ PUSH r8
+ PUSH r7
+ PUSH r6
+ PUSH r5
+ PUSH r4
+ PUSH r3
+ PUSH r2
+ PUSH r1
+ PUSH r0
+.endif
+#endif
+
#ifdef CONFIG_ARC_HAS_ACCL_REGS
PUSH r59
PUSH r58
@@ -86,6 +113,33 @@
POP r59
#endif
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+ POP r0
+ POP r1
+ POP r2
+ POP r3
+ POP r4
+ POP r5
+ POP r6
+ POP r7
+ POP r8
+ POP r9
+ POP r10
+ POP r11
+
+ POP blink
+ POPAX lp_end
+ POPAX lp_start
+
+ POP r9
+ mov lp_count, r9
+
+ add sp, sp, 12 ; skip JLI, LDI, EI
+ ld.as r9, [sp, -10] ; reload r9 which got clobbered
+.endif
+#endif
+
.endm
/*------------------------------------------------------------------------*/
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index cc558a25b8fa..562089d62d9d 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -209,7 +209,9 @@ restore_regs:
;####### Return from Intr #######
debug_marker_l1:
- bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+ ; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+ btst r0, STATUS_DE_BIT ; Z flag set if bit clear
+ bnz .Lintr_ret_to_delay_slot ; branch if STATUS_DE_BIT set
.Lisr_ret_fast_path:
; Handle special case #1: (Entry via Exception, Return via IRQ)
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 067ea362fb3e..cf18b3e5a934 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -49,11 +49,13 @@ void arc_init_IRQ(void)
*(unsigned int *)&ictrl = 0;
+#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
ictrl.save_nr_gpr_pairs = 6; /* r0 to r11 (r12 saved manually) */
ictrl.save_blink = 1;
ictrl.save_lp_regs = 1; /* LP_COUNT, LP_START, LP_END */
ictrl.save_u_to_u = 0; /* user ctxt saved on kernel stack */
ictrl.save_idx_regs = 1; /* JLI, LDI, EI */
+#endif
WRITE_AUX(AUX_IRQ_CTRL, ictrl);
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index fcc9a9e27e9c..8fb1600b29b7 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -9,5 +9,6 @@ menuconfig ARC_SOC_HSDK
bool "ARC HS Development Kit SOC"
depends on ISA_ARCV2
select ARC_HAS_ACCL_REGS
+ select ARC_IRQ_NO_AUTOSAVE
select CLK_HSDK
select RESET_HSDK
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stuart Menefy <[email protected]>
commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream.
The step values for some of the LDOs appears to be incorrect, resulting
in incorrect voltages (or at least, ones which are different from the
Samsung 3.4 vendor kernel).
Signed-off-by: Stuart Menefy <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/s2mpa01.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -304,13 +304,13 @@ static const struct regulator_desc regul
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
regulator_desc_ldo(4, STEP_50_MV),
- regulator_desc_ldo(5, STEP_50_MV),
+ regulator_desc_ldo(5, STEP_25_MV),
regulator_desc_ldo(6, STEP_25_MV),
regulator_desc_ldo(7, STEP_50_MV),
regulator_desc_ldo(8, STEP_50_MV),
regulator_desc_ldo(9, STEP_50_MV),
regulator_desc_ldo(10, STEP_50_MV),
- regulator_desc_ldo(11, STEP_25_MV),
+ regulator_desc_ldo(11, STEP_50_MV),
regulator_desc_ldo(12, STEP_50_MV),
regulator_desc_ldo(13, STEP_50_MV),
regulator_desc_ldo(14, STEP_50_MV),
@@ -321,11 +321,11 @@ static const struct regulator_desc regul
regulator_desc_ldo(19, STEP_50_MV),
regulator_desc_ldo(20, STEP_50_MV),
regulator_desc_ldo(21, STEP_50_MV),
- regulator_desc_ldo(22, STEP_25_MV),
- regulator_desc_ldo(23, STEP_25_MV),
+ regulator_desc_ldo(22, STEP_50_MV),
+ regulator_desc_ldo(23, STEP_50_MV),
regulator_desc_ldo(24, STEP_50_MV),
regulator_desc_ldo(25, STEP_50_MV),
- regulator_desc_ldo(26, STEP_50_MV),
+ regulator_desc_ldo(26, STEP_25_MV),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 29b00e609960ae0fcff382f4c7079dd0874a5311 ]
When we made the shmem_reserve_inode call in shmem_link conditional, we
forgot to update the declaration for ret so that it always has a known
value. Dan Carpenter pointed out this deficiency in the original patch.
Fixes: 1062af920c07 ("tmpfs: fix link accounting when a tmpfile is linked in")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Matej Kupljen <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/shmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index 9b78c04f532b..037e2ee9ccac 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -3096,7 +3096,7 @@ static int shmem_create(struct inode *dir, struct dentry *dentry, umode_t mode,
static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
struct inode *inode = d_inode(old_dentry);
- int ret;
+ int ret = 0;
/*
* No ordinary (disk based) filesystem counts links as inodes;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1062af920c07f5b54cf5060fde3339da6df0cf6b ]
tmpfs has a peculiarity of accounting hard links as if they were
separate inodes: so that when the number of inodes is limited, as it is
by default, a user cannot soak up an unlimited amount of unreclaimable
dcache memory just by repeatedly linking a file.
But when v3.11 added O_TMPFILE, and the ability to use linkat() on the
fd, we missed accommodating this new case in tmpfs: "df -i" shows that
an extra "inode" remains accounted after the file is unlinked and the fd
closed and the actual inode evicted. If a user repeatedly links
tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they
are deleted.
Just skip the extra reservation from shmem_link() in this case: there's
a sense in which this first link of a tmpfile is then cheaper than a
hard link of another file, but the accounting works out, and there's
still good limiting, so no need to do anything more complicated.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: f4e0c30c191 ("allow the temp files created by open() to be linked to")
Signed-off-by: Darrick J. Wong <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Reported-by: Matej Kupljen <[email protected]>
Acked-by: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/shmem.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index 6c10f1d92251..9b78c04f532b 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -3102,10 +3102,14 @@ static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentr
* No ordinary (disk based) filesystem counts links as inodes;
* but each new link needs a new dentry, pinning lowmem, and
* tmpfs dentries cannot be pruned until they are unlinked.
+ * But if an O_TMPFILE file is linked into the tmpfs, the
+ * first link must skip that, to get the accounting right.
*/
- ret = shmem_reserve_inode(inode->i_sb);
- if (ret)
- goto out;
+ if (inode->i_nlink) {
+ ret = shmem_reserve_inode(inode->i_sb);
+ if (ret)
+ goto out;
+ }
dir->i_size += BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = current_time(inode);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 74698f6971f25d045301139413578865fc2bd8f9 ]
Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have
values other than 0 or 1. At the moment, Linux is quite strict in the
way it handles this field at early boot stage (cpufeature is fine) and
will refuse to use the system register CPU interface if it doesn't
find the value 1.
Fixes: 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
Reported-by: Chase Conklin <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Signed-off-by: Vladimir Murzin <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/head.S | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index ec393275ba04..1371542de0d3 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -442,8 +442,7 @@ set_hcr:
/* GICv3 system register access */
mrs x0, id_aa64pfr0_el1
ubfx x0, x0, #24, #4
- cmp x0, #1
- b.ne 3f
+ cbz x0, 3f
mrs_s x0, SYS_ICC_SRE_EL2
orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 09db51241118aeb06e1c8cd393b45879ce099b36 ]
On ESP output, sk_wmem_alloc is incremented for the added padding if a
socket is associated to the skb. When replying with TCP SYNACKs over
IPsec, the associated sk is a casted request socket, only. Increasing
sk_wmem_alloc on a request socket results in a write at an arbitrary
struct offset. In the best case, this produces the following WARNING:
WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4]
refcount_t: addition on 0; use-after-free.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2
Hardware name: Marvell Armada 380/385 (Device Tree)
[...]
[<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4])
[<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664)
[<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4)
[<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8)
[<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948)
[<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64)
[<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4)
[<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20)
[<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc)
[<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54)
[<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec)
[<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8)
[<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c)
[...]
The issue triggers only when not using TCP syncookies, as for syncookies
no socket is associated.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Martin Willi <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/esp4.c | 2 +-
net/ipv6/esp6.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index b00e4a43b4dc..d30285c5d52d 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -307,7 +307,7 @@ int esp_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *
skb->len += tailen;
skb->data_len += tailen;
skb->truesize += tailen;
- if (sk)
+ if (sk && sk_fullsock(sk))
refcount_add(tailen, &sk->sk_wmem_alloc);
goto out;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index f112fef79216..ef7822fad0fd 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -275,7 +275,7 @@ int esp6_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
skb->len += tailen;
skb->data_len += tailen;
skb->truesize += tailen;
- if (sk)
+ if (sk && sk_fullsock(sk))
refcount_add(tailen, &sk->sk_wmem_alloc);
goto out;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 156a67a9065e3339be85f811d1b13b920e50d73b ]
The enabling L3/L4 filtering for transmit switched packets for all
devices caused unforeseen issue on older devices when trying to send UDP
traffic in an ordered sequence. This bit was originally intended for X550
devices, which supported this feature, so limit the scope of this bit to
only X550 devices.
Signed-off-by: Jeff Kirsher <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 42183a8b649c..01c120d656c5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3827,8 +3827,11 @@ static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
else
mrqc = IXGBE_MRQC_VMDQRSS64EN;
- /* Enable L3/L4 for Tx Switched packets */
- mrqc |= IXGBE_MRQC_L3L4TXSWEN;
+ /* Enable L3/L4 for Tx Switched packets only for X550,
+ * older devices do not support this feature
+ */
+ if (hw->mac.type >= ixgbe_mac_X550)
+ mrqc |= IXGBE_MRQC_L3L4TXSWEN;
} else {
if (tcs > 4)
mrqc = IXGBE_MRQC_RTRSS8TCEN;
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e928b5d6b75e239feb9c6d5488974b6646a0ebc8 ]
If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe()
leaves clk enabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/mv643xx_eth.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 81c1fac00d33..2434409f84b2 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2886,7 +2886,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
ret = mv643xx_eth_shared_of_probe(pdev);
if (ret)
- return ret;
+ goto err_put_clk;
pd = dev_get_platdata(&pdev->dev);
msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
@@ -2894,6 +2894,11 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
infer_hw_params(msp);
return 0;
+
+err_put_clk:
+ if (!IS_ERR(msp->clk))
+ clk_disable_unprepare(msp->clk);
+ return ret;
}
static int mv643xx_eth_shared_remove(struct platform_device *pdev)
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f036ebd9bfbe1e91a3d855e85e05fc5ff156b641 ]
NFP BPF JIT compiler is doing a couple of small optimizations when jitting
ALU imm instructions, some of these optimizations could save code-gen, for
example:
A & -1 = A
A | 0 = A
A ^ 0 = A
However, for ALU32, high 32-bit of the 64-bit register should still be
cleared according to ISA semantics.
Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Jiong Wang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/netronome/nfp/bpf/jit.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
index 3105ee5bbf8e..c1ffec85817a 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
@@ -756,15 +756,10 @@ wrp_alu64_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
static int
wrp_alu32_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
- enum alu_op alu_op, bool skip)
+ enum alu_op alu_op)
{
const struct bpf_insn *insn = &meta->insn;
- if (skip) {
- meta->skip = true;
- return 0;
- }
-
wrp_alu_imm(nfp_prog, insn->dst_reg * 2, alu_op, insn->imm);
wrp_immed(nfp_prog, reg_both(insn->dst_reg * 2 + 1), 0);
@@ -1017,7 +1012,7 @@ static int xor_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
static int xor_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
{
- return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !meta->insn.imm);
+ return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR);
}
static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1027,7 +1022,7 @@ static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
static int and_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
{
- return wrp_alu32_imm(nfp_prog, meta, ALU_OP_AND, !~meta->insn.imm);
+ return wrp_alu32_imm(nfp_prog, meta, ALU_OP_AND);
}
static int or_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1037,7 +1032,7 @@ static int or_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
static int or_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
{
- return wrp_alu32_imm(nfp_prog, meta, ALU_OP_OR, !meta->insn.imm);
+ return wrp_alu32_imm(nfp_prog, meta, ALU_OP_OR);
}
static int add_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1047,7 +1042,7 @@ static int add_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
static int add_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
{
- return wrp_alu32_imm(nfp_prog, meta, ALU_OP_ADD, !meta->insn.imm);
+ return wrp_alu32_imm(nfp_prog, meta, ALU_OP_ADD);
}
static int sub_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1057,7 +1052,7 @@ static int sub_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
static int sub_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
{
- return wrp_alu32_imm(nfp_prog, meta, ALU_OP_SUB, !meta->insn.imm);
+ return wrp_alu32_imm(nfp_prog, meta, ALU_OP_SUB);
}
static int shl_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d358def706880defa4c9e87381c5bf086a97d5f9 ]
In case the hold bit is not needed we are carrying the old values.
Fix the same by resetting the bit when not needed.
Fixes the sporadic i2c bus lockups on National Instruments
Zynq-based devices.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Reported-by: Kyle Roeschley <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Shubhrajyoti Datta <[email protected]>
Tested-by: Kyle Roeschley <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-cadence.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index b13605718291..d917cefc5a19 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -382,8 +382,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+ if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -440,8 +442,11 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+ if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
+
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ]
We should be using flush_delayed_work() instead of flush_work() in
matrix_keypad_stop() to ensure that we are not missing work that is
scheduled but not yet put in the workqueue (i.e. its delay timer has not
expired yet).
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/matrix_keypad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 782dda68d93a..c04559a232f7 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -222,7 +222,7 @@ static void matrix_keypad_stop(struct input_dev *dev)
keypad->stopped = true;
spin_unlock_irq(&keypad->lock);
- flush_work(&keypad->work.work);
+ flush_delayed_work(&keypad->work);
/*
* matrix_keypad_scan() will leave IRQs enabled;
* we should disable them now.
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 098e13f5b21d3398065fce8780f07a3ef62f4812 ]
ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation,
but lacks proper Kconfig dependencies and does not explicitly
request defrag features.
As a result, if netfilter hooks are not loaded, when IPv6 fragmented
packet are handled by ipvs only the first fragment makes through.
Fix it properly declaring the dependency on Kconfig and registering
netfilter hooks on ip_vs_add_service() and ip_vs_new_dest().
Reported-by: Li Shuang <[email protected]>
Signed-off-by: Andrea Claudi <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/Kconfig | 1 +
net/netfilter/ipvs/ip_vs_core.c | 10 ++++------
net/netfilter/ipvs/ip_vs_ctl.c | 10 ++++++++++
3 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index b32fb0dbe237..3f8e490d1133 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -29,6 +29,7 @@ config IP_VS_IPV6
bool "IPv6 support for IPVS"
depends on IPV6 = y || IP_VS = IPV6
select IP6_NF_IPTABLES
+ select NF_DEFRAG_IPV6
---help---
Add IPv6 support to IPVS.
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 1bd53b1e7672..4278f5c947ab 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1524,14 +1524,12 @@ ip_vs_try_to_schedule(struct netns_ipvs *ipvs, int af, struct sk_buff *skb,
/* sorry, all this trouble for a no-hit :) */
IP_VS_DBG_PKT(12, af, pp, skb, iph->off,
"ip_vs_in: packet continues traversal as normal");
- if (iph->fragoffs) {
- /* Fragment that couldn't be mapped to a conn entry
- * is missing module nf_defrag_ipv6
- */
- IP_VS_DBG_RL("Unhandled frag, load nf_defrag_ipv6\n");
+
+ /* Fragment couldn't be mapped to a conn entry */
+ if (iph->fragoffs)
IP_VS_DBG_PKT(7, af, pp, skb, iph->off,
"unhandled fragment");
- }
+
*verdict = NF_ACCEPT;
return 0;
}
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index dff4ead3d117..56dd5ce6274f 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -43,6 +43,7 @@
#ifdef CONFIG_IP_VS_IPV6
#include <net/ipv6.h>
#include <net/ip6_route.h>
+#include <net/netfilter/ipv6/nf_defrag_ipv6.h>
#endif
#include <net/route.h>
#include <net/sock.h>
@@ -888,6 +889,7 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest,
{
struct ip_vs_dest *dest;
unsigned int atype, i;
+ int ret = 0;
EnterFunction(2);
@@ -898,6 +900,10 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest,
atype & IPV6_ADDR_LINKLOCAL) &&
!__ip_vs_addr_is_local_v6(svc->ipvs->net, &udest->addr.in6))
return -EINVAL;
+
+ ret = nf_defrag_ipv6_enable(svc->ipvs->net);
+ if (ret)
+ return ret;
} else
#endif
{
@@ -1221,6 +1227,10 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u,
ret = -EINVAL;
goto out_err;
}
+
+ ret = nf_defrag_ipv6_enable(ipvs->net);
+ if (ret)
+ goto out_err;
}
#endif
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Zhijie <[email protected]>
commit c1c214adcb56d36433480c8fedf772498e7e539c upstream.
For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously
updated in the operation. The new iv value should be written to device
register by software.
Reported-by: Eric Biggers <[email protected]>
Fixes: 433cd2c617bf ("crypto: rockchip - add crypto driver for rk3288")
Cc: <[email protected]> # v4.5+
Signed-off-by: Zhang Zhijie <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/rockchip/rk3288_crypto.h | 1
drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c | 34 +++++++++++++++++++++
2 files changed, 35 insertions(+)
--- a/drivers/crypto/rockchip/rk3288_crypto.h
+++ b/drivers/crypto/rockchip/rk3288_crypto.h
@@ -245,6 +245,7 @@ struct rk_cipher_ctx {
struct rk_crypto_info *dev;
unsigned int keylen;
u32 mode;
+ u8 iv[AES_BLOCK_SIZE];
};
enum alg_type {
--- a/drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_ablkcipher.c
@@ -242,6 +242,17 @@ static void crypto_dma_start(struct rk_c
static int rk_set_data_start(struct rk_crypto_info *dev)
{
int err;
+ struct ablkcipher_request *req =
+ ablkcipher_request_cast(dev->async_req);
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+ struct rk_cipher_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ u32 ivsize = crypto_ablkcipher_ivsize(tfm);
+ u8 *src_last_blk = page_address(sg_page(dev->sg_src)) +
+ dev->sg_src->offset + dev->sg_src->length - ivsize;
+
+ /* store the iv that need to be updated in chain mode */
+ if (ctx->mode & RK_CRYPTO_DEC)
+ memcpy(ctx->iv, src_last_blk, ivsize);
err = dev->load_data(dev, dev->sg_src, dev->sg_dst);
if (!err)
@@ -286,6 +297,28 @@ static void rk_iv_copyback(struct rk_cry
memcpy_fromio(req->info, dev->reg + RK_CRYPTO_AES_IV_0, ivsize);
}
+static void rk_update_iv(struct rk_crypto_info *dev)
+{
+ struct ablkcipher_request *req =
+ ablkcipher_request_cast(dev->async_req);
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+ struct rk_cipher_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ u32 ivsize = crypto_ablkcipher_ivsize(tfm);
+ u8 *new_iv = NULL;
+
+ if (ctx->mode & RK_CRYPTO_DEC) {
+ new_iv = ctx->iv;
+ } else {
+ new_iv = page_address(sg_page(dev->sg_dst)) +
+ dev->sg_dst->offset + dev->sg_dst->length - ivsize;
+ }
+
+ if (ivsize == DES_BLOCK_SIZE)
+ memcpy_toio(dev->reg + RK_CRYPTO_TDES_IV_0, new_iv, ivsize);
+ else if (ivsize == AES_BLOCK_SIZE)
+ memcpy_toio(dev->reg + RK_CRYPTO_AES_IV_0, new_iv, ivsize);
+}
+
/* return:
* true some err was occurred
* fault no err, continue
@@ -307,6 +340,7 @@ static int rk_ablk_rx(struct rk_crypto_i
}
}
if (dev->left_bytes) {
+ rk_update_iv(dev);
if (dev->aligned) {
if (sg_is_last(dev->sg_src)) {
dev_err(dev->dev, "[%s:%d] Lack of data\n",
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 77568e535af7c4f97eaef1e555bf0af83772456c upstream.
Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and
"michael_mic", fail the improved hash tests because they sometimes
produce the wrong digest. The bug is that in the case where a
scatterlist element crosses pages, not all the data is actually hashed
because the scatterlist walk terminates too early. This happens because
the 'nbytes' variable in crypto_hash_walk_done() is assigned the number
of bytes remaining in the page, then later interpreted as the number of
bytes remaining in the scatterlist element. Fix it.
Fixes: 900a081f6912 ("crypto: ahash - Fix early termination in hash walk")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ahash.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -86,17 +86,17 @@ static int hash_walk_new_entry(struct cr
int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err)
{
unsigned int alignmask = walk->alignmask;
- unsigned int nbytes = walk->entrylen;
walk->data -= walk->offset;
- if (nbytes && walk->offset & alignmask && !err) {
- walk->offset = ALIGN(walk->offset, alignmask + 1);
- nbytes = min(nbytes,
- ((unsigned int)(PAGE_SIZE)) - walk->offset);
- walk->entrylen -= nbytes;
+ if (walk->entrylen && (walk->offset & alignmask) && !err) {
+ unsigned int nbytes;
+ walk->offset = ALIGN(walk->offset, alignmask + 1);
+ nbytes = min(walk->entrylen,
+ (unsigned int)(PAGE_SIZE - walk->offset));
if (nbytes) {
+ walk->entrylen -= nbytes;
walk->data += walk->offset;
return nbytes;
}
@@ -116,7 +116,7 @@ int crypto_hash_walk_done(struct crypto_
if (err)
return err;
- if (nbytes) {
+ if (walk->entrylen) {
walk->offset = 0;
walk->pg++;
return hash_walk_next(walk);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 2ea8bab4dd2a9014e723b28091831fa850b82d83 upstream.
Fix NULL pointer exception on device unbind when device tree does not
contain "has-touchscreen" property. In such case the input device is
not registered so it should not be unregistered.
$ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind
Unable to handle kernel NULL pointer dereference at virtual address 00000474
...
(input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80)
(exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40)
(platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac)
(device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4)
(unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0)
(kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c)
(__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184)
(vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac)
(ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/exynos_adc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -916,7 +916,7 @@ static int exynos_adc_remove(struct plat
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
- if (IS_REACHABLE(CONFIG_INPUT)) {
+ if (IS_REACHABLE(CONFIG_INPUT) && info->input) {
free_irq(info->tsirq, info);
input_unregister_device(info->input);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d2ceb7e57086750ea6198a31fd942d98099a0786 ]
If nfs_page_async_flush() removes the page from the mapping, then we can't
use page_file_mapping() on it as nfs_updatepate() is wont to do when
receiving an error. Instead, push the mapping to the stack before the page
is possibly truncated.
Fixes: 8fc75bed96bb ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()")
Signed-off-by: Benjamin Coddington <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/write.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 2d956a7d5378..50ed3944d183 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -236,9 +236,9 @@ out:
}
/* A writeback failed: mark the page as bad, and invalidate the page cache */
-static void nfs_set_pageerror(struct page *page)
+static void nfs_set_pageerror(struct address_space *mapping)
{
- nfs_zap_mapping(page_file_mapping(page)->host, page_file_mapping(page));
+ nfs_zap_mapping(mapping->host, mapping);
}
/*
@@ -994,7 +994,7 @@ static void nfs_write_completion(struct nfs_pgio_header *hdr)
nfs_list_remove_request(req);
if (test_bit(NFS_IOHDR_ERROR, &hdr->flags) &&
(hdr->good_bytes < bytes)) {
- nfs_set_pageerror(req->wb_page);
+ nfs_set_pageerror(page_file_mapping(req->wb_page));
nfs_context_set_write_error(req->wb_context, hdr->error);
goto remove_req;
}
@@ -1330,7 +1330,8 @@ int nfs_updatepage(struct file *file, struct page *page,
unsigned int offset, unsigned int count)
{
struct nfs_open_context *ctx = nfs_file_open_context(file);
- struct inode *inode = page_file_mapping(page)->host;
+ struct address_space *mapping = page_file_mapping(page);
+ struct inode *inode = mapping->host;
int status = 0;
nfs_inc_stats(inode, NFSIOS_VFSUPDATEPAGE);
@@ -1348,7 +1349,7 @@ int nfs_updatepage(struct file *file, struct page *page,
status = nfs_writepage_setup(ctx, page, offset, count);
if (status < 0)
- nfs_set_pageerror(page);
+ nfs_set_pageerror(mapping);
else
__set_page_dirty_nobuffers(page);
out:
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d7bf31a0f85faaf63c63c39d55154825a1eaaea9 ]
RING_CONTROL reg was not written due to wrong address, hence all
the subsequent ring flush was timing out.
Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence")
Signed-off-by: Rayagonda Kokatanur <[email protected]>
Signed-off-by: Ray Jui <[email protected]>
Reviewed-by: Scott Branden <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/bcm-flexrm-mailbox.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mailbox/bcm-flexrm-mailbox.c b/drivers/mailbox/bcm-flexrm-mailbox.c
index f052a3eb2098..7e3ed2714630 100644
--- a/drivers/mailbox/bcm-flexrm-mailbox.c
+++ b/drivers/mailbox/bcm-flexrm-mailbox.c
@@ -1381,9 +1381,9 @@ static void flexrm_shutdown(struct mbox_chan *chan)
/* Clear ring flush state */
timeout = 1000; /* timeout of 1s */
- writel_relaxed(0x0, ring + RING_CONTROL);
+ writel_relaxed(0x0, ring->regs + RING_CONTROL);
do {
- if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
+ if (!(readl_relaxed(ring->regs + RING_FLUSH_DONE) &
FLUSH_DONE_MASK))
break;
mdelay(1);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c16e12010060c6c7a31f08b4a99513064cb53b7d ]
KASAN reports and additional traces point to out-of-bounds accesses to
the dapm_up_seq and dapm_down_seq lookup tables. The indices used are
larger than the array definition.
Fix by adding missing entries for the new widget types in these two
lookup tables, and align them with PGA values.
Also the sequences for the following widgets were not defined. Since
their values defaulted to zero, assign them explicitly
snd_soc_dapm_input
snd_soc_dapm_output
snd_soc_dapm_vmid
snd_soc_dapm_siggen
snd_soc_dapm_sink
Fixes: 8a70b4544ef4 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.').
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-dapm.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index bba6a917cd02..e9f7c6287376 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -75,12 +75,16 @@ static int dapm_up_seq[] = {
[snd_soc_dapm_clock_supply] = 1,
[snd_soc_dapm_supply] = 2,
[snd_soc_dapm_micbias] = 3,
+ [snd_soc_dapm_vmid] = 3,
[snd_soc_dapm_dai_link] = 2,
[snd_soc_dapm_dai_in] = 4,
[snd_soc_dapm_dai_out] = 4,
[snd_soc_dapm_aif_in] = 4,
[snd_soc_dapm_aif_out] = 4,
[snd_soc_dapm_mic] = 5,
+ [snd_soc_dapm_siggen] = 5,
+ [snd_soc_dapm_input] = 5,
+ [snd_soc_dapm_output] = 5,
[snd_soc_dapm_mux] = 6,
[snd_soc_dapm_demux] = 6,
[snd_soc_dapm_dac] = 7,
@@ -88,11 +92,19 @@ static int dapm_up_seq[] = {
[snd_soc_dapm_mixer] = 8,
[snd_soc_dapm_mixer_named_ctl] = 8,
[snd_soc_dapm_pga] = 9,
+ [snd_soc_dapm_buffer] = 9,
+ [snd_soc_dapm_scheduler] = 9,
+ [snd_soc_dapm_effect] = 9,
+ [snd_soc_dapm_src] = 9,
+ [snd_soc_dapm_asrc] = 9,
+ [snd_soc_dapm_encoder] = 9,
+ [snd_soc_dapm_decoder] = 9,
[snd_soc_dapm_adc] = 10,
[snd_soc_dapm_out_drv] = 11,
[snd_soc_dapm_hp] = 11,
[snd_soc_dapm_spk] = 11,
[snd_soc_dapm_line] = 11,
+ [snd_soc_dapm_sink] = 11,
[snd_soc_dapm_kcontrol] = 12,
[snd_soc_dapm_post] = 13,
};
@@ -105,13 +117,25 @@ static int dapm_down_seq[] = {
[snd_soc_dapm_spk] = 3,
[snd_soc_dapm_line] = 3,
[snd_soc_dapm_out_drv] = 3,
+ [snd_soc_dapm_sink] = 3,
[snd_soc_dapm_pga] = 4,
+ [snd_soc_dapm_buffer] = 4,
+ [snd_soc_dapm_scheduler] = 4,
+ [snd_soc_dapm_effect] = 4,
+ [snd_soc_dapm_src] = 4,
+ [snd_soc_dapm_asrc] = 4,
+ [snd_soc_dapm_encoder] = 4,
+ [snd_soc_dapm_decoder] = 4,
[snd_soc_dapm_switch] = 5,
[snd_soc_dapm_mixer_named_ctl] = 5,
[snd_soc_dapm_mixer] = 5,
[snd_soc_dapm_dac] = 6,
[snd_soc_dapm_mic] = 7,
+ [snd_soc_dapm_siggen] = 7,
+ [snd_soc_dapm_input] = 7,
+ [snd_soc_dapm_output] = 7,
[snd_soc_dapm_micbias] = 8,
+ [snd_soc_dapm_vmid] = 8,
[snd_soc_dapm_mux] = 9,
[snd_soc_dapm_demux] = 9,
[snd_soc_dapm_aif_in] = 10,
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2c2ade81741c66082f8211f0b96cf509cc4c0218 ]
The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum
number of references that we might need to create in the fastpath later,
the bump-allocation fastpath only has to modify the non-atomic bias value
that tracks the number of extra references we hold instead of the atomic
refcount. The maximum number of allocations we can serve (under the
assumption that no allocation is made with size 0) is nc->size, so that's
the bias used.
However, even when all memory in the allocation has been given away, a
reference to the page is still held; and in the `offset < 0` slowpath, the
page may be reused if everyone else has dropped their references.
This means that the necessary number of references is actually
`nc->size+1`.
Luckily, from a quick grep, it looks like the only path that can call
page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which
requires CAP_NET_ADMIN in the init namespace and is only intended to be
used for kernel testing and fuzzing.
To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the
`offset < 0` path, below the virt_to_page() call, and then repeatedly call
writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI,
with a vector consisting of 15 elements containing 1 byte each.
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/page_alloc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a2f365f40433..40075c1946b3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4325,11 +4325,11 @@ refill:
/* Even if we own the page, we do not use atomic_set().
* This would break get_page_unless_zero() users.
*/
- page_ref_add(page, size - 1);
+ page_ref_add(page, size);
/* reset page count bias and offset to start of new frag */
nc->pfmemalloc = page_is_pfmemalloc(page);
- nc->pagecnt_bias = size;
+ nc->pagecnt_bias = size + 1;
nc->offset = size;
}
@@ -4345,10 +4345,10 @@ refill:
size = nc->size;
#endif
/* OK, page count is 0, we can safely set it */
- set_page_count(page, size);
+ set_page_count(page, size + 1);
/* reset page count bias and offset to start of new frag */
- nc->pagecnt_bias = size;
+ nc->pagecnt_bias = size + 1;
offset = size - fragsz;
}
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit aa3312012f103f91f123600bbf768b11c8f431bc ]
The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.
Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it. Add a label at the end of the function to
do all the of_node_puts.
The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
* return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/imx/imx-ldb.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index dd5312b02a8d..4f2e6c7e04c1 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -652,8 +652,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
int bus_format;
ret = of_property_read_u32(child, "reg", &i);
- if (ret || i < 0 || i > 1)
- return -EINVAL;
+ if (ret || i < 0 || i > 1) {
+ ret = -EINVAL;
+ goto free_child;
+ }
if (!of_device_is_available(child))
continue;
@@ -666,7 +668,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
channel = &imx_ldb->channel[i];
channel->ldb = imx_ldb;
channel->chno = i;
- channel->child = child;
/*
* The output port is port@4 with an external 4-port mux or
@@ -676,13 +677,13 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
imx_ldb->lvds_mux ? 4 : 2, 0,
&channel->panel, &channel->bridge);
if (ret && ret != -ENODEV)
- return ret;
+ goto free_child;
/* panel ddc only if there is no bridge */
if (!channel->bridge) {
ret = imx_ldb_panel_ddc(dev, channel, child);
if (ret)
- return ret;
+ goto free_child;
}
bus_format = of_get_bus_format(dev, child);
@@ -698,18 +699,26 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
if (bus_format < 0) {
dev_err(dev, "could not determine data mapping: %d\n",
bus_format);
- return bus_format;
+ ret = bus_format;
+ goto free_child;
}
channel->bus_format = bus_format;
+ channel->child = child;
ret = imx_ldb_register(drm, channel);
- if (ret)
- return ret;
+ if (ret) {
+ channel->child = NULL;
+ goto free_child;
+ }
}
dev_set_drvdata(dev, imx_ldb);
return 0;
+
+free_child:
+ of_node_put(child);
+ return ret;
}
static void imx_ldb_unbind(struct device *dev, struct device *master,
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ]
Dan Carpenter reported the following:
The patch 52898025cf7d: "[S390] dasd: security and PSF update patch
for EMC CKD ioctl" from Mar 8, 2010, leads to the following static
checker warning:
drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io()
error: using offset into zero size array 'psf_data[]'
drivers/s390/block/dasd_eckd.c
4458 /* Copy parms from caller */
4459 rc = -EFAULT;
4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
^^^^^^^
The user can specify any "usrparm.psf_data_len". They choose zero by
mistake.
4461 goto out;
4462 if (is_compat_task()) {
4463 /* Make sure pointers are sane even on 31 bit. */
4464 rc = -EINVAL;
4465 if ((usrparm.psf_data >> 32) != 0)
4466 goto out;
4467 if ((usrparm.rssd_result >> 32) != 0)
4468 goto out;
4469 usrparm.psf_data &= 0x7fffffffULL;
4470 usrparm.rssd_result &= 0x7fffffffULL;
4471 }
4472 /* alloc I/O data area */
4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL
| GFP_DMA);
4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL
| GFP_DMA);
4475 if (!psf_data || !rssd_result) {
kzalloc() returns a ZERO_SIZE_PTR (0x16).
4476 rc = -ENOMEM;
4477 goto out_free;
4478 }
4479
4480 /* get syscall header from user space */
4481 rc = -EFAULT;
4482 if (copy_from_user(psf_data,
4483 (void __user *)(unsigned long)
usrparm.psf_data,
4484 usrparm.psf_data_len))
That all works great.
4485 goto out_free;
4486 psf0 = psf_data[0];
4487 psf1 = psf_data[1];
But now we're assuming that "->psf_data_len" was at least 2 bytes.
Fix this by checking the user specified length psf_data_len.
Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Stefan Haberland <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/block/dasd_eckd.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 4c7c8455da96..0a1e7f9b5239 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -4463,6 +4463,14 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp)
usrparm.psf_data &= 0x7fffffffULL;
usrparm.rssd_result &= 0x7fffffffULL;
}
+ /* at least 2 bytes are accessed and should be allocated */
+ if (usrparm.psf_data_len < 2) {
+ DBF_DEV_EVENT(DBF_WARNING, device,
+ "Symmetrix ioctl invalid data length %d",
+ usrparm.psf_data_len);
+ rc = -EINVAL;
+ goto out;
+ }
/* alloc I/O data area */
psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
--
2.19.1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: S.j. Wang <[email protected]>
commit cc29ea007347f39f4c5a4d27b0b555955a0277f9 upstream.
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.
Fixes 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <[email protected]>
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Ackedy-by: Nicolin Chen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/fsl/fsl_esai.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -395,7 +395,8 @@ static int fsl_esai_set_dai_fmt(struct s
break;
case SND_SOC_DAIFMT_RIGHT_J:
/* Data on rising edge of bclk, frame high, right aligned */
- xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCR_xWA;
+ xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
+ xcr |= ESAI_xCR_xWA;
break;
case SND_SOC_DAIFMT_DSP_A:
/* Data on rising edge of bclk, frame high, 1clk before data */
@@ -452,12 +453,12 @@ static int fsl_esai_set_dai_fmt(struct s
return -EINVAL;
}
- mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR;
+ mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR | ESAI_xCR_xWA;
regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, xcr);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, mask, xcr);
mask = ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP |
- ESAI_xCCR_xFSD | ESAI_xCCR_xCKD | ESAI_xCR_xWA;
+ ESAI_xCCR_xFSD | ESAI_xCCR_xCKD;
regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, mask, xccr);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, mask, xccr);
stable-rc/linux-4.14.y boot: 52 boots: 0 failed, 51 passed with 1 untried/unknown (v4.14.107-184-gf85b59a43475)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.107-184-gf85b59a43475/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.107-184-gf85b59a43475/
Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.107-184-gf85b59a43475
Git Commit: f85b59a43475b5bcca299c897549d4aff496dda2
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 29 unique boards, 15 SoC families, 9 builds out of 201
---
For more info write to <[email protected]>
On 3/22/19 4:13 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.108 release.
> There are 183 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 24 11:11:06 UTC 2019.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 329 pass: 329 fail: 0
Guenter
On Fri, 22 Mar 2019 at 17:17, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.108 release.
> There are 183 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 24 11:11:06 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.108-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.14.108-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: f85b59a43475b5bcca299c897549d4aff496dda2
git describe: v4.14.107-184-gf85b59a43475
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.107-184-gf85b59a43475
No regressions (compared to build v4.14.107)
No fixes (compared to build v4.14.107)
Ran 22886 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 22/03/2019 11:13, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.108 release.
> There are 183 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 24 11:11:06 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.108-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
20 tests: 20 pass, 0 fail
Linux version: 4.14.108-gdee55b0
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic