Allow atomic_enable and atomic_disable operations from
drm_crtc_helper_funcs struct optional. With this, the target display
drivers don't need to define a dummy function if they don't need one.
Changes since v2:
* Don't make funcs optional
* Update kerneldoc for atomic_enable/disable
* Replace "if (funcs->atomic_enable)" by "if (funcs->commit)"
* Improve commit message
Signed-off-by: Rodrigo Siqueira <[email protected]>
---
drivers/gpu/drm/drm_atomic_helper.c | 5 ++---
include/drm/drm_modeset_helper_vtables.h | 4 ++++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 540a77a2ade9..d506e13c2945 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1034,7 +1034,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
funcs->atomic_disable(crtc, old_crtc_state);
else if (funcs->disable)
funcs->disable(crtc);
- else
+ else if (funcs->dpms)
funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
if (!(dev->irq_enabled && dev->num_crtcs))
@@ -1277,10 +1277,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
if (new_crtc_state->enable) {
DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
crtc->base.id, crtc->name);
-
if (funcs->atomic_enable)
funcs->atomic_enable(crtc, old_crtc_state);
- else
+ else if (funcs->commit)
funcs->commit(crtc);
}
}
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index cfb7be40bed7..ce4de6b1e444 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -418,6 +418,8 @@ struct drm_crtc_helper_funcs {
* Drivers can use the @old_crtc_state input parameter if the operations
* needed to enable the CRTC don't depend solely on the new state but
* also on the transition between the old state and the new state.
+ *
+ * This function is optional.
*/
void (*atomic_enable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
@@ -441,6 +443,8 @@ struct drm_crtc_helper_funcs {
* parameter @old_crtc_state which could be used to access the old
* state. Atomic drivers should consider to use this one instead
* of @disable.
+ *
+ * This function is optional.
*/
void (*atomic_disable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
--
2.21.0
On Thu, Mar 14, 2019 at 03:48:45PM -0300, Rodrigo Siqueira wrote:
> Allow atomic_enable and atomic_disable operations from
> drm_crtc_helper_funcs struct optional. With this, the target display
> drivers don't need to define a dummy function if they don't need one.
>
> Changes since v2:
> * Don't make funcs optional
> * Update kerneldoc for atomic_enable/disable
> * Replace "if (funcs->atomic_enable)" by "if (funcs->commit)"
> * Improve commit message
>
> Signed-off-by: Rodrigo Siqueira <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
> ---
> drivers/gpu/drm/drm_atomic_helper.c | 5 ++---
> include/drm/drm_modeset_helper_vtables.h | 4 ++++
> 2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 540a77a2ade9..d506e13c2945 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -1034,7 +1034,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
> funcs->atomic_disable(crtc, old_crtc_state);
> else if (funcs->disable)
> funcs->disable(crtc);
> - else
> + else if (funcs->dpms)
> funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
>
> if (!(dev->irq_enabled && dev->num_crtcs))
> @@ -1277,10 +1277,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
> if (new_crtc_state->enable) {
> DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
> crtc->base.id, crtc->name);
> -
> if (funcs->atomic_enable)
> funcs->atomic_enable(crtc, old_crtc_state);
> - else
> + else if (funcs->commit)
> funcs->commit(crtc);
> }
> }
> diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
> index cfb7be40bed7..ce4de6b1e444 100644
> --- a/include/drm/drm_modeset_helper_vtables.h
> +++ b/include/drm/drm_modeset_helper_vtables.h
> @@ -418,6 +418,8 @@ struct drm_crtc_helper_funcs {
> * Drivers can use the @old_crtc_state input parameter if the operations
> * needed to enable the CRTC don't depend solely on the new state but
> * also on the transition between the old state and the new state.
> + *
> + * This function is optional.
> */
> void (*atomic_enable)(struct drm_crtc *crtc,
> struct drm_crtc_state *old_crtc_state);
> @@ -441,6 +443,8 @@ struct drm_crtc_helper_funcs {
> * parameter @old_crtc_state which could be used to access the old
> * state. Atomic drivers should consider to use this one instead
> * of @disable.
> + *
> + * This function is optional.
> */
> void (*atomic_disable)(struct drm_crtc *crtc,
> struct drm_crtc_state *old_crtc_state);
> --
> 2.21.0
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
On 03/15, Daniel Vetter wrote:
> On Thu, Mar 14, 2019 at 03:48:45PM -0300, Rodrigo Siqueira wrote:
> > Allow atomic_enable and atomic_disable operations from
> > drm_crtc_helper_funcs struct optional. With this, the target display
> > drivers don't need to define a dummy function if they don't need one.
> >
> > Changes since v2:
> > * Don't make funcs optional
> > * Update kerneldoc for atomic_enable/disable
> > * Replace "if (funcs->atomic_enable)" by "if (funcs->commit)"
> > * Improve commit message
> >
> > Signed-off-by: Rodrigo Siqueira <[email protected]>
>
> Reviewed-by: Daniel Vetter <[email protected]>
Hi,
Is it ok if I apply this patch?
> > ---
> > drivers/gpu/drm/drm_atomic_helper.c | 5 ++---
> > include/drm/drm_modeset_helper_vtables.h | 4 ++++
> > 2 files changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> > index 540a77a2ade9..d506e13c2945 100644
> > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > @@ -1034,7 +1034,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
> > funcs->atomic_disable(crtc, old_crtc_state);
> > else if (funcs->disable)
> > funcs->disable(crtc);
> > - else
> > + else if (funcs->dpms)
> > funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
> >
> > if (!(dev->irq_enabled && dev->num_crtcs))
> > @@ -1277,10 +1277,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
> > if (new_crtc_state->enable) {
> > DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
> > crtc->base.id, crtc->name);
> > -
> > if (funcs->atomic_enable)
> > funcs->atomic_enable(crtc, old_crtc_state);
> > - else
> > + else if (funcs->commit)
> > funcs->commit(crtc);
> > }
> > }
> > diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
> > index cfb7be40bed7..ce4de6b1e444 100644
> > --- a/include/drm/drm_modeset_helper_vtables.h
> > +++ b/include/drm/drm_modeset_helper_vtables.h
> > @@ -418,6 +418,8 @@ struct drm_crtc_helper_funcs {
> > * Drivers can use the @old_crtc_state input parameter if the operations
> > * needed to enable the CRTC don't depend solely on the new state but
> > * also on the transition between the old state and the new state.
> > + *
> > + * This function is optional.
> > */
> > void (*atomic_enable)(struct drm_crtc *crtc,
> > struct drm_crtc_state *old_crtc_state);
> > @@ -441,6 +443,8 @@ struct drm_crtc_helper_funcs {
> > * parameter @old_crtc_state which could be used to access the old
> > * state. Atomic drivers should consider to use this one instead
> > * of @disable.
> > + *
> > + * This function is optional.
> > */
> > void (*atomic_disable)(struct drm_crtc *crtc,
> > struct drm_crtc_state *old_crtc_state);
> > --
> > 2.21.0
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Rodrigo Siqueira
https://siqueira.tech
Graduate Student
Department of Computer Science
University of S?o Paulo
On Mon, Mar 25, 2019 at 08:29:06AM -0300, Rodrigo Siqueira wrote:
> On 03/15, Daniel Vetter wrote:
> > On Thu, Mar 14, 2019 at 03:48:45PM -0300, Rodrigo Siqueira wrote:
> > > Allow atomic_enable and atomic_disable operations from
> > > drm_crtc_helper_funcs struct optional. With this, the target display
> > > drivers don't need to define a dummy function if they don't need one.
> > >
> > > Changes since v2:
> > > * Don't make funcs optional
> > > * Update kerneldoc for atomic_enable/disable
> > > * Replace "if (funcs->atomic_enable)" by "if (funcs->commit)"
> > > * Improve commit message
> > >
> > > Signed-off-by: Rodrigo Siqueira <[email protected]>
> >
> > Reviewed-by: Daniel Vetter <[email protected]>
>
> Hi,
> Is it ok if I apply this patch?
Sure.
-Daniel
>
> > > ---
> > > drivers/gpu/drm/drm_atomic_helper.c | 5 ++---
> > > include/drm/drm_modeset_helper_vtables.h | 4 ++++
> > > 2 files changed, 6 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> > > index 540a77a2ade9..d506e13c2945 100644
> > > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > > @@ -1034,7 +1034,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
> > > funcs->atomic_disable(crtc, old_crtc_state);
> > > else if (funcs->disable)
> > > funcs->disable(crtc);
> > > - else
> > > + else if (funcs->dpms)
> > > funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
> > >
> > > if (!(dev->irq_enabled && dev->num_crtcs))
> > > @@ -1277,10 +1277,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
> > > if (new_crtc_state->enable) {
> > > DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
> > > crtc->base.id, crtc->name);
> > > -
> > > if (funcs->atomic_enable)
> > > funcs->atomic_enable(crtc, old_crtc_state);
> > > - else
> > > + else if (funcs->commit)
> > > funcs->commit(crtc);
> > > }
> > > }
> > > diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
> > > index cfb7be40bed7..ce4de6b1e444 100644
> > > --- a/include/drm/drm_modeset_helper_vtables.h
> > > +++ b/include/drm/drm_modeset_helper_vtables.h
> > > @@ -418,6 +418,8 @@ struct drm_crtc_helper_funcs {
> > > * Drivers can use the @old_crtc_state input parameter if the operations
> > > * needed to enable the CRTC don't depend solely on the new state but
> > > * also on the transition between the old state and the new state.
> > > + *
> > > + * This function is optional.
> > > */
> > > void (*atomic_enable)(struct drm_crtc *crtc,
> > > struct drm_crtc_state *old_crtc_state);
> > > @@ -441,6 +443,8 @@ struct drm_crtc_helper_funcs {
> > > * parameter @old_crtc_state which could be used to access the old
> > > * state. Atomic drivers should consider to use this one instead
> > > * of @disable.
> > > + *
> > > + * This function is optional.
> > > */
> > > void (*atomic_disable)(struct drm_crtc *crtc,
> > > struct drm_crtc_state *old_crtc_state);
> > > --
> > > 2.21.0
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
>
> --
> Rodrigo Siqueira
> https://siqueira.tech
> Graduate Student
> Department of Computer Science
> University of S?o Paulo
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
On Tue, Mar 26, 2019 at 08:50:03AM +0100, Daniel Vetter wrote:
> On Mon, Mar 25, 2019 at 08:29:06AM -0300, Rodrigo Siqueira wrote:
> > On 03/15, Daniel Vetter wrote:
> > > On Thu, Mar 14, 2019 at 03:48:45PM -0300, Rodrigo Siqueira wrote:
> > > > Allow atomic_enable and atomic_disable operations from
> > > > drm_crtc_helper_funcs struct optional. With this, the target display
> > > > drivers don't need to define a dummy function if they don't need one.
> > > >
> > > > Changes since v2:
> > > > * Don't make funcs optional
> > > > * Update kerneldoc for atomic_enable/disable
> > > > * Replace "if (funcs->atomic_enable)" by "if (funcs->commit)"
> > > > * Improve commit message
> > > >
> > > > Signed-off-by: Rodrigo Siqueira <[email protected]>
> > >
> > > Reviewed-by: Daniel Vetter <[email protected]>
> >
> > Hi,
> > Is it ok if I apply this patch?
>
> Sure.
> -Daniel
Hmm, seems to not be applied yet. Pushed to drm-misc-fixes.
cheers,
Gerd