This adds support for the mv88e6250 chip. Initially based on the
mv88e6240, this time around, I've been through each ->ops callback and
checked that it makes sense, either replacing with a 6250 specific
variant or dropping it if no equivalent functionality seems to exist
for the 6250. Along the way, I found a few oddities in the existing
code, mostly sent as separate patches/questions.
The one relevant to the 6250 is the ieee_pri_map callback, where the
existing mv88e6085_g1_ieee_pri_map() is actually wrong for many of the
existing users. I've put the mv88e6250_g1_ieee_pri_map() patch first
in case some of the existing chips get switched over to use that and
it is deemed important enough for -stable.
v3:
- rebase on top of net-next/master
- add reviewed-bys to patches unchanged from v2 (2,3,4,5)
- add 6250-specific ->ieee_pri_map, ->port_set_speed, ->port_link_state (1,6,7)
- in addition, use mv88e6065_phylink_validate for ->phylink_validate,
and don't implement ->port_get_cmode, ->port_set_jumbo_size,
->port_disable_learn_limit, ->rmu_disable
- drop ptp support
- add patch adding the compatible string to the DT binding (9)
- add small refactoring patch (10)
v2:
- rebase on top of net-next/master
- add reviewed-by to two patches unchanged from v1 (2,3)
- add separate watchdog_ops
Rasmus Villemoes (10):
net: dsa: mv88e6xxx: add mv88e6250_g1_ieee_pri_map
net: dsa: mv88e6xxx: introduce support for two chips using direct smi
addressing
net: dsa: mv88e6xxx: prepare mv88e6xxx_g1_atu_op() for the mv88e6250
net: dsa: mv88e6xxx: implement vtu_getnext and vtu_loadpurge for
mv88e6250
net: dsa: mv88e6xxx: implement watchdog_ops for mv88e6250
net: dsa: mv88e6xxx: implement port_set_speed for mv88e6250
net: dsa: mv88e6xxx: implement port_link_state for mv88e6250
net: dsa: mv88e6xxx: add support for mv88e6250
dt-bindings: net: dsa: marvell: add "marvell,mv88e6250" compatible
string
net: dsa: mv88e6xxx: refactor mv88e6352_g1_reset
.../devicetree/bindings/net/dsa/marvell.txt | 7 +-
drivers/net/dsa/mv88e6xxx/chip.c | 81 +++++++++++++++++++
drivers/net/dsa/mv88e6xxx/chip.h | 8 ++
drivers/net/dsa/mv88e6xxx/global1.c | 17 +++-
drivers/net/dsa/mv88e6xxx/global1.h | 7 ++
drivers/net/dsa/mv88e6xxx/global1_atu.c | 5 +-
drivers/net/dsa/mv88e6xxx/global1_vtu.c | 58 +++++++++++++
drivers/net/dsa/mv88e6xxx/global2.c | 26 ++++++
drivers/net/dsa/mv88e6xxx/global2.h | 14 ++++
drivers/net/dsa/mv88e6xxx/port.c | 77 ++++++++++++++++++
drivers/net/dsa/mv88e6xxx/port.h | 14 ++++
drivers/net/dsa/mv88e6xxx/smi.c | 25 +++++-
12 files changed, 333 insertions(+), 6 deletions(-)
--
2.20.1
All the currently supported chips have .num_databases either 256 or
4096, so this patch does not change behaviour for any of those. The
mv88e6250, however, has .num_databases == 64, and it does not put the
upper two bits in ATU control 13:12, but rather in ATU Operation
9:8. So change the logic to prepare for supporting mv88e6250.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/global1_atu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c
index ea243840ee0f..1ae680bc0eff 100644
--- a/drivers/net/dsa/mv88e6xxx/global1_atu.c
+++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c
@@ -94,7 +94,7 @@ static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op)
if (err)
return err;
} else {
- if (mv88e6xxx_num_databases(chip) > 16) {
+ if (mv88e6xxx_num_databases(chip) > 64) {
/* ATU DBNum[7:4] are located in ATU Control 15:12 */
err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_CTL,
&val);
@@ -106,6 +106,9 @@ static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op)
val);
if (err)
return err;
+ } else if (mv88e6xxx_num_databases(chip) > 16) {
+ /* ATU DBNum[5:4] are located in ATU Operation 9:8 */
+ op |= (fid & 0x30) << 4;
}
/* ATU DBNum[3:0] are located in ATU Operation 3:0 */
--
2.20.1
These are almost identical to the 6185 variants, but have fewer bits
for the FID.
Bit 10 of the VTU_OP register (offset 0x05) is the VidPolicy bit,
which one should probably preserve in mv88e6xxx_g1_vtu_op(), instead
of always writing a 0. However, on the 6352 family, that bit is
located at bit 12 in the VTU FID register (offset 0x02), and is always
unconditionally cleared by the mv88e6xxx_g1_vtu_fid_write()
function.
Since nothing in the existing driver seems to know or care about that
bit, it seems reasonable to not add the boilerplate to preserve it for
the 6250 (which would require adding a chip-specific vtu_op function,
or adding chip-quirks to the existing one).
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/global1.h | 4 ++
drivers/net/dsa/mv88e6xxx/global1_vtu.c | 58 +++++++++++++++++++++++++
2 files changed, 62 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h
index 2bcbe7c8b279..711a2c6d0a25 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -306,6 +306,10 @@ int mv88e6185_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry);
int mv88e6185_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry);
+int mv88e6250_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
+ struct mv88e6xxx_vtu_entry *entry);
+int mv88e6250_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
+ struct mv88e6xxx_vtu_entry *entry);
int mv88e6352_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry);
int mv88e6352_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
diff --git a/drivers/net/dsa/mv88e6xxx/global1_vtu.c b/drivers/net/dsa/mv88e6xxx/global1_vtu.c
index 058326924f3e..a8ef268c32cb 100644
--- a/drivers/net/dsa/mv88e6xxx/global1_vtu.c
+++ b/drivers/net/dsa/mv88e6xxx/global1_vtu.c
@@ -307,6 +307,35 @@ static int mv88e6xxx_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
return mv88e6xxx_g1_vtu_vid_read(chip, entry);
}
+int mv88e6250_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
+ struct mv88e6xxx_vtu_entry *entry)
+{
+ u16 val;
+ int err;
+
+ err = mv88e6xxx_g1_vtu_getnext(chip, entry);
+ if (err)
+ return err;
+
+ if (entry->valid) {
+ err = mv88e6185_g1_vtu_data_read(chip, entry);
+ if (err)
+ return err;
+
+ /* VTU DBNum[3:0] are located in VTU Operation 3:0
+ * VTU DBNum[5:4] are located in VTU Operation 9:8
+ */
+ err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_VTU_OP, &val);
+ if (err)
+ return err;
+
+ entry->fid = val & 0x000f;
+ entry->fid |= (val & 0x0300) >> 4;
+ }
+
+ return 0;
+}
+
int mv88e6185_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry)
{
@@ -396,6 +425,35 @@ int mv88e6390_g1_vtu_getnext(struct mv88e6xxx_chip *chip,
return 0;
}
+int mv88e6250_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
+ struct mv88e6xxx_vtu_entry *entry)
+{
+ u16 op = MV88E6XXX_G1_VTU_OP_VTU_LOAD_PURGE;
+ int err;
+
+ err = mv88e6xxx_g1_vtu_op_wait(chip);
+ if (err)
+ return err;
+
+ err = mv88e6xxx_g1_vtu_vid_write(chip, entry);
+ if (err)
+ return err;
+
+ if (entry->valid) {
+ err = mv88e6185_g1_vtu_data_write(chip, entry);
+ if (err)
+ return err;
+
+ /* VTU DBNum[3:0] are located in VTU Operation 3:0
+ * VTU DBNum[5:4] are located in VTU Operation 9:8
+ */
+ op |= entry->fid & 0x000f;
+ op |= (entry->fid & 0x0030) << 8;
+ }
+
+ return mv88e6xxx_g1_vtu_op(chip, op);
+}
+
int mv88e6185_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry)
{
--
2.20.1
The new mv88e6250_g1_reset() is identical to mv88e6352_g1_reset() except
for the call of mv88e6352_g1_wait_ppu_polling(), so refactor the 6352
version in term of the 6250 one. No functional change.
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/global1.c | 14 +-------------
1 file changed, 1 insertion(+), 13 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index fc10b6e495f5..41c0792a2e2b 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -203,21 +203,9 @@ int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip)
int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip)
{
- u16 val;
int err;
- /* Set the SWReset bit 15 */
- err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val);
- if (err)
- return err;
-
- val |= MV88E6XXX_G1_CTL1_SW_RESET;
-
- err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val);
- if (err)
- return err;
-
- err = mv88e6xxx_g1_wait_init_ready(chip);
+ err = mv88e6250_g1_reset(chip);
if (err)
return err;
--
2.20.1
The 88e6250 (as well as 6220, 6071, 6070, 6020) do not support
multi-chip (indirect) addressing. However, one can still have two of
them on the same mdio bus, since the device only uses 16 of the 32
possible addresses, either addresses 0x00-0x0F or 0x10-0x1F depending
on the ADDR4 pin at reset [since ADDR4 is internally pulled high, the
latter is the default].
In order to prepare for supporting the 88e6250 and friends, introduce
mv88e6xxx_info::dual_chip to allow having a non-zero sw_addr while
still using direct addressing.
Reviewed-by: Vivien Didelot <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.h | 6 ++++++
drivers/net/dsa/mv88e6xxx/smi.c | 25 ++++++++++++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index faa3fa889f19..74777c3bc313 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -112,6 +112,12 @@ struct mv88e6xxx_info {
* when it is non-zero, and use indirect access to internal registers.
*/
bool multi_chip;
+ /* Dual-chip Addressing Mode
+ * Some chips respond to only half of the 32 SMI addresses,
+ * allowing two to coexist on the same SMI interface.
+ */
+ bool dual_chip;
+
enum dsa_tag_protocol tag_protocol;
/* Mask for FromPort and ToPort value of PortVec used in ATU Move
diff --git a/drivers/net/dsa/mv88e6xxx/smi.c b/drivers/net/dsa/mv88e6xxx/smi.c
index 96f7d2685bdc..775f8d55a962 100644
--- a/drivers/net/dsa/mv88e6xxx/smi.c
+++ b/drivers/net/dsa/mv88e6xxx/smi.c
@@ -24,6 +24,10 @@
* When ADDR is non-zero, the chip uses Multi-chip Addressing Mode, allowing
* multiple devices to share the SMI interface. In this mode it responds to only
* 2 registers, used to indirectly access the internal SMI devices.
+ *
+ * Some chips use a different scheme: Only the ADDR4 pin is used for
+ * configuration, and the device responds to 16 of the 32 SMI
+ * addresses, allowing two to coexist on the same SMI interface.
*/
static int mv88e6xxx_smi_direct_read(struct mv88e6xxx_chip *chip,
@@ -76,6 +80,23 @@ static const struct mv88e6xxx_bus_ops mv88e6xxx_smi_direct_ops = {
.write = mv88e6xxx_smi_direct_write,
};
+static int mv88e6xxx_smi_dual_direct_read(struct mv88e6xxx_chip *chip,
+ int dev, int reg, u16 *data)
+{
+ return mv88e6xxx_smi_direct_read(chip, chip->sw_addr + dev, reg, data);
+}
+
+static int mv88e6xxx_smi_dual_direct_write(struct mv88e6xxx_chip *chip,
+ int dev, int reg, u16 data)
+{
+ return mv88e6xxx_smi_direct_write(chip, chip->sw_addr + dev, reg, data);
+}
+
+static const struct mv88e6xxx_bus_ops mv88e6xxx_smi_dual_direct_ops = {
+ .read = mv88e6xxx_smi_dual_direct_read,
+ .write = mv88e6xxx_smi_dual_direct_write,
+};
+
/* Offset 0x00: SMI Command Register
* Offset 0x01: SMI Data Register
*/
@@ -144,7 +165,9 @@ static const struct mv88e6xxx_bus_ops mv88e6xxx_smi_indirect_ops = {
int mv88e6xxx_smi_init(struct mv88e6xxx_chip *chip,
struct mii_bus *bus, int sw_addr)
{
- if (sw_addr == 0)
+ if (chip->info->dual_chip)
+ chip->smi_ops = &mv88e6xxx_smi_dual_direct_ops;
+ else if (sw_addr == 0)
chip->smi_ops = &mv88e6xxx_smi_direct_ops;
else if (chip->info->multi_chip)
chip->smi_ops = &mv88e6xxx_smi_indirect_ops;
--
2.20.1
The mv88e6250 has port_base_addr 0x8 or 0x18 (depending on
configuration pins), so it constitutes a new family and hence needs
its own compatible string.
Signed-off-by: Rasmus Villemoes <[email protected]>
---
Documentation/devicetree/bindings/net/dsa/marvell.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index feb007af13cb..6f9538974bb9 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -21,10 +21,13 @@ which is at a different MDIO base address in different switch families.
6341, 6350, 6351, 6352
- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
6190, 6190X, 6191, 6290, 6390, 6390X
+- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model:
+ 6250
Required properties:
-- compatible : Should be one of "marvell,mv88e6085" or
- "marvell,mv88e6190" as indicated above
+- compatible : Should be one of "marvell,mv88e6085",
+ "marvell,mv88e6190" or "marvell,mv88e6250" as
+ indicated above
- reg : Address on the MII bus for the switch.
Optional properties:
--
2.20.1
The MV88E6352_G2_WDOG_CTL_* bits almost, but not quite, describe the
watchdog control register on the mv88e6250. Among those actually
referenced in the code, only QC_ENABLE differs (bit 6 rather than bit
5).
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/global2.c | 26 ++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/global2.h | 14 ++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c
index 91a3cb2452ac..85984eb69ffd 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.c
+++ b/drivers/net/dsa/mv88e6xxx/global2.c
@@ -816,6 +816,32 @@ const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops = {
.irq_free = mv88e6097_watchdog_free,
};
+static void mv88e6250_watchdog_free(struct mv88e6xxx_chip *chip)
+{
+ u16 reg;
+
+ mv88e6xxx_g2_read(chip, MV88E6250_G2_WDOG_CTL, ®);
+
+ reg &= ~(MV88E6250_G2_WDOG_CTL_EGRESS_ENABLE |
+ MV88E6250_G2_WDOG_CTL_QC_ENABLE);
+
+ mv88e6xxx_g2_write(chip, MV88E6250_G2_WDOG_CTL, reg);
+}
+
+static int mv88e6250_watchdog_setup(struct mv88e6xxx_chip *chip)
+{
+ return mv88e6xxx_g2_write(chip, MV88E6250_G2_WDOG_CTL,
+ MV88E6250_G2_WDOG_CTL_EGRESS_ENABLE |
+ MV88E6250_G2_WDOG_CTL_QC_ENABLE |
+ MV88E6250_G2_WDOG_CTL_SWRESET);
+}
+
+const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops = {
+ .irq_action = mv88e6097_watchdog_action,
+ .irq_setup = mv88e6250_watchdog_setup,
+ .irq_free = mv88e6250_watchdog_free,
+};
+
static int mv88e6390_watchdog_setup(struct mv88e6xxx_chip *chip)
{
return mv88e6xxx_g2_update(chip, MV88E6390_G2_WDOG_CTL,
diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h
index 194660d8c783..6205c6b75bc7 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.h
+++ b/drivers/net/dsa/mv88e6xxx/global2.h
@@ -205,6 +205,18 @@
#define MV88E6XXX_G2_SCRATCH_MISC_PTR_MASK 0x7f00
#define MV88E6XXX_G2_SCRATCH_MISC_DATA_MASK 0x00ff
+/* Offset 0x1B: Watch Dog Control Register */
+#define MV88E6250_G2_WDOG_CTL 0x1b
+#define MV88E6250_G2_WDOG_CTL_QC_HISTORY 0x0100
+#define MV88E6250_G2_WDOG_CTL_QC_EVENT 0x0080
+#define MV88E6250_G2_WDOG_CTL_QC_ENABLE 0x0040
+#define MV88E6250_G2_WDOG_CTL_EGRESS_HISTORY 0x0020
+#define MV88E6250_G2_WDOG_CTL_EGRESS_EVENT 0x0010
+#define MV88E6250_G2_WDOG_CTL_EGRESS_ENABLE 0x0008
+#define MV88E6250_G2_WDOG_CTL_FORCE_IRQ 0x0004
+#define MV88E6250_G2_WDOG_CTL_HISTORY 0x0002
+#define MV88E6250_G2_WDOG_CTL_SWRESET 0x0001
+
/* Offset 0x1B: Watch Dog Control Register */
#define MV88E6352_G2_WDOG_CTL 0x1b
#define MV88E6352_G2_WDOG_CTL_EGRESS_EVENT 0x0080
@@ -334,6 +346,7 @@ int mv88e6xxx_g2_device_mapping_write(struct mv88e6xxx_chip *chip, int target,
int port);
extern const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops;
+extern const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops;
extern const struct mv88e6xxx_irq_ops mv88e6390_watchdog_ops;
extern const struct mv88e6xxx_avb_ops mv88e6165_avb_ops;
@@ -484,6 +497,7 @@ static inline int mv88e6xxx_g2_pot_clear(struct mv88e6xxx_chip *chip)
}
static const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops = {};
+static const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops = {};
static const struct mv88e6xxx_irq_ops mv88e6390_watchdog_ops = {};
static const struct mv88e6xxx_avb_ops mv88e6165_avb_ops = {};
--
2.20.1
This adds support for the Marvell 88E6250. I've checked that each
member in the ops-structure makes sense, and basic switchdev
functionality works fine.
It uses the new dual_chip option, and since its port registers start
at SMI address 0x08 or 0x18 (i.e., always sw_addr + 0x08), we need to
introduce a new compatible string in order for the auto-identification
in mv88e6xxx_detect() to work.
The chip has four per port 16-bits statistics registers, two of which
correspond to the existing "sw_in_filtered" and "sw_out_filtered" (but
at offsets 0x13 and 0x10 rather than 0x12 and 0x13, because why should
this be easy...). Wiring up those four statistics seems to require
introducing a STATS_TYPE_PORT_6250 bit or similar, which seems a tad
ugly, so for now this just allows access to the STATS_TYPE_BANK0 ones.
The chip does have ptp support, and the existing
mv88e6352_{gpio,avb,ptp}_ops at first glance seem like they would work
out-of-the-box, but for simplicity (and lack of testing) I'm eliding
this.
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/chip.c | 81 +++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/chip.h | 2 +
drivers/net/dsa/mv88e6xxx/global1.c | 19 +++++++
drivers/net/dsa/mv88e6xxx/global1.h | 1 +
drivers/net/dsa/mv88e6xxx/port.h | 1 +
5 files changed, 104 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 12f165a71a6c..df9c51da7733 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -829,6 +829,12 @@ static int mv88e6095_stats_get_strings(struct mv88e6xxx_chip *chip,
STATS_TYPE_BANK0 | STATS_TYPE_PORT);
}
+static int mv88e6250_stats_get_strings(struct mv88e6xxx_chip *chip,
+ uint8_t *data)
+{
+ return mv88e6xxx_stats_get_strings(chip, data, STATS_TYPE_BANK0);
+}
+
static int mv88e6320_stats_get_strings(struct mv88e6xxx_chip *chip,
uint8_t *data)
{
@@ -899,6 +905,11 @@ static int mv88e6095_stats_get_sset_count(struct mv88e6xxx_chip *chip)
STATS_TYPE_PORT);
}
+static int mv88e6250_stats_get_sset_count(struct mv88e6xxx_chip *chip)
+{
+ return mv88e6xxx_stats_get_sset_count(chip, STATS_TYPE_BANK0);
+}
+
static int mv88e6320_stats_get_sset_count(struct mv88e6xxx_chip *chip)
{
return mv88e6xxx_stats_get_sset_count(chip, STATS_TYPE_BANK0 |
@@ -966,6 +977,13 @@ static int mv88e6095_stats_get_stats(struct mv88e6xxx_chip *chip, int port,
0, MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
}
+static int mv88e6250_stats_get_stats(struct mv88e6xxx_chip *chip, int port,
+ uint64_t *data)
+{
+ return mv88e6xxx_stats_get_stats(chip, port, data, STATS_TYPE_BANK0,
+ 0, MV88E6XXX_G1_STATS_OP_HIST_RX_TX);
+}
+
static int mv88e6320_stats_get_stats(struct mv88e6xxx_chip *chip, int port,
uint64_t *data)
{
@@ -3448,6 +3466,44 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.phylink_validate = mv88e6352_phylink_validate,
};
+static const struct mv88e6xxx_ops mv88e6250_ops = {
+ /* MV88E6XXX_FAMILY_6250 */
+ .ieee_pri_map = mv88e6250_g1_ieee_pri_map,
+ .ip_pri_map = mv88e6085_g1_ip_pri_map,
+ .irl_init_all = mv88e6352_g2_irl_init_all,
+ .get_eeprom = mv88e6xxx_g2_get_eeprom16,
+ .set_eeprom = mv88e6xxx_g2_set_eeprom16,
+ .set_switch_mac = mv88e6xxx_g2_set_switch_mac,
+ .phy_read = mv88e6xxx_g2_smi_phy_read,
+ .phy_write = mv88e6xxx_g2_smi_phy_write,
+ .port_set_link = mv88e6xxx_port_set_link,
+ .port_set_duplex = mv88e6xxx_port_set_duplex,
+ .port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
+ .port_set_speed = mv88e6250_port_set_speed,
+ .port_tag_remap = mv88e6095_port_tag_remap,
+ .port_set_frame_mode = mv88e6351_port_set_frame_mode,
+ .port_set_egress_floods = mv88e6352_port_set_egress_floods,
+ .port_set_ether_type = mv88e6351_port_set_ether_type,
+ .port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
+ .port_pause_limit = mv88e6097_port_pause_limit,
+ .port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
+ .port_link_state = mv88e6250_port_link_state,
+ .stats_snapshot = mv88e6320_g1_stats_snapshot,
+ .stats_set_histogram = mv88e6095_g1_stats_set_histogram,
+ .stats_get_sset_count = mv88e6250_stats_get_sset_count,
+ .stats_get_strings = mv88e6250_stats_get_strings,
+ .stats_get_stats = mv88e6250_stats_get_stats,
+ .set_cpu_port = mv88e6095_g1_set_cpu_port,
+ .set_egress_port = mv88e6095_g1_set_egress_port,
+ .watchdog_ops = &mv88e6250_watchdog_ops,
+ .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+ .pot_clear = mv88e6xxx_g2_pot_clear,
+ .reset = mv88e6250_g1_reset,
+ .vtu_getnext = mv88e6250_g1_vtu_getnext,
+ .vtu_loadpurge = mv88e6250_g1_vtu_loadpurge,
+ .phylink_validate = mv88e6065_phylink_validate,
+};
+
static const struct mv88e6xxx_ops mv88e6290_ops = {
/* MV88E6XXX_FAMILY_6390 */
.setup_errata = mv88e6390_setup_errata,
@@ -4233,6 +4289,27 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.ops = &mv88e6240_ops,
},
+ [MV88E6250] = {
+ .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6250,
+ .family = MV88E6XXX_FAMILY_6250,
+ .name = "Marvell 88E6250",
+ .num_databases = 64,
+ .num_ports = 7,
+ .num_internal_phys = 5,
+ .max_vid = 4095,
+ .port_base_addr = 0x08,
+ .phy_base_addr = 0x00,
+ .global1_addr = 0x0f,
+ .global2_addr = 0x07,
+ .age_time_coeff = 15000,
+ .g1_irqs = 9,
+ .g2_irqs = 10,
+ .atu_move_port_mask = 0xf,
+ .dual_chip = true,
+ .tag_protocol = DSA_TAG_PROTO_DSA,
+ .ops = &mv88e6250_ops,
+ },
+
[MV88E6290] = {
.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6290,
.family = MV88E6XXX_FAMILY_6390,
@@ -4841,6 +4918,10 @@ static const struct of_device_id mv88e6xxx_of_match[] = {
.compatible = "marvell,mv88e6190",
.data = &mv88e6xxx_table[MV88E6190],
},
+ {
+ .compatible = "marvell,mv88e6250",
+ .data = &mv88e6xxx_table[MV88E6250],
+ },
{ /* sentinel */ },
};
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 74777c3bc313..2fbe72b7587b 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -62,6 +62,7 @@ enum mv88e6xxx_model {
MV88E6190X,
MV88E6191,
MV88E6240,
+ MV88E6250,
MV88E6290,
MV88E6320,
MV88E6321,
@@ -80,6 +81,7 @@ enum mv88e6xxx_family {
MV88E6XXX_FAMILY_6097, /* 6046 6085 6096 6097 */
MV88E6XXX_FAMILY_6165, /* 6123 6161 6165 */
MV88E6XXX_FAMILY_6185, /* 6108 6121 6122 6131 6152 6155 6182 6185 */
+ MV88E6XXX_FAMILY_6250, /* 6250 */
MV88E6XXX_FAMILY_6320, /* 6320 6321 */
MV88E6XXX_FAMILY_6341, /* 6141 6341 */
MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index c851b7b532a4..fc10b6e495f5 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -182,6 +182,25 @@ int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip)
return mv88e6185_g1_wait_ppu_polling(chip);
}
+int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip)
+{
+ u16 val;
+ int err;
+
+ /* Set the SWReset bit 15 */
+ err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val);
+ if (err)
+ return err;
+
+ val |= MV88E6XXX_G1_CTL1_SW_RESET;
+
+ err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val);
+ if (err)
+ return err;
+
+ return mv88e6xxx_g1_wait_init_ready(chip);
+}
+
int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip)
{
u16 val;
diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h
index 711a2c6d0a25..9ef7cf1e015f 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -259,6 +259,7 @@ int mv88e6xxx_g1_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr);
int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip);
int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip);
+int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip);
int mv88e6185_g1_ppu_enable(struct mv88e6xxx_chip *chip);
int mv88e6185_g1_ppu_disable(struct mv88e6xxx_chip *chip);
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 3a89c2868cec..b3b57ea6ef07 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -122,6 +122,7 @@
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6191 0x1910
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6185 0x1a70
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6240 0x2400
+#define MV88E6XXX_PORT_SWITCH_ID_PROD_6250 0x2500
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6290 0x2900
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6321 0x3100
#define MV88E6XXX_PORT_SWITCH_ID_PROD_6141 0x3400
--
2.20.1
The data sheet also mentions the possibility of selecting 200 Mbps for
the MII ports (ports 5 and 6) by setting the ForceSpd field to
0x2 (aka MV88E6065_PORT_MAC_CTL_SPEED_200). However, there's a note
that "actual speed is determined by bit 8 above", and flipping back a
page, one finds that bits 13:8 are reserved...
So without further information on what bit 8 means, let's stick to
supporting just 10 and 100 Mbps on all ports.
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/port.c | 12 ++++++++++++
drivers/net/dsa/mv88e6xxx/port.h | 1 +
2 files changed, 13 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index c44b2822e4dd..a41bca17cba1 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -294,6 +294,18 @@ int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
}
+/* Support 10, 100 Mbps (e.g. 88E6250 family) */
+int mv88e6250_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
+{
+ if (speed == SPEED_MAX)
+ speed = 100;
+
+ if (speed > 100)
+ return -EOPNOTSUPP;
+
+ return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
+}
+
/* Support 10, 100, 200, 1000, 2500 Mbps (e.g. 88E6341) */
int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
{
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 39c85e98fb92..1957e3e1cf47 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -279,6 +279,7 @@ int mv88e6xxx_port_set_duplex(struct mv88e6xxx_chip *chip, int port, int dup);
int mv88e6065_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
+int mv88e6250_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
int mv88e6390_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
--
2.20.1
The mv88e6250 has a rather different way of reporting the link, speed
and duplex status. A simple difference is that the link bit is bit 12
rather than bit 11 of the port status register.
It gets more complicated for speed and duplex, which do not have
separate fields. Instead, there's a four-bit PortMode field, and
decoding that depends on whether it's a phy or mii port. For the phy
ports, only four of the 16 values have defined meaning; the rest are
called "reserved", so returning {SPEED,DUPLEX}_UNKNOWN seems
reasonable.
For the mii ports, most possible values are documented (0x3 and 0x5
are reserved), but I'm unable to make sense of them all. Since the
bits simply reflect the Px_MODE[3:0] configuration pins, just support
the subset that I'm certain about. Support for other setups can be
added later.
Signed-off-by: Rasmus Villemoes <[email protected]>
---
drivers/net/dsa/mv88e6xxx/port.c | 65 ++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/port.h | 12 ++++++
2 files changed, 77 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index a41bca17cba1..a9a308051d7c 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -533,6 +533,71 @@ int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode)
return 0;
}
+int mv88e6250_port_link_state(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_link_state *state)
+{
+ int err;
+ u16 reg;
+
+ err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®);
+ if (err)
+ return err;
+
+ if (port < 5) {
+ switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+ case MV88E6250_PORT_STS_PORTMODE_PHY_10_HALF:
+ state->speed = SPEED_10;
+ state->duplex = DUPLEX_HALF;
+ break;
+ case MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF:
+ state->speed = SPEED_100;
+ state->duplex = DUPLEX_HALF;
+ break;
+ case MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL:
+ state->speed = SPEED_10;
+ state->duplex = DUPLEX_FULL;
+ break;
+ case MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL:
+ state->speed = SPEED_100;
+ state->duplex = DUPLEX_FULL;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ state->duplex = DUPLEX_UNKNOWN;
+ break;
+ }
+ } else {
+ switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF:
+ state->speed = SPEED_10;
+ state->duplex = DUPLEX_HALF;
+ break;
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF:
+ state->speed = SPEED_100;
+ state->duplex = DUPLEX_HALF;
+ break;
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL:
+ state->speed = SPEED_10;
+ state->duplex = DUPLEX_FULL;
+ break;
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL:
+ state->speed = SPEED_100;
+ state->duplex = DUPLEX_FULL;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ state->duplex = DUPLEX_UNKNOWN;
+ break;
+ }
+ }
+
+ state->link = !!(reg & MV88E6250_PORT_STS_LINK);
+ state->an_enabled = 1;
+ state->an_complete = state->link;
+
+ return 0;
+}
+
int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
struct phylink_link_state *state)
{
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 1957e3e1cf47..3a89c2868cec 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -23,6 +23,16 @@
#define MV88E6XXX_PORT_STS_MY_PAUSE 0x4000
#define MV88E6XXX_PORT_STS_HD_FLOW 0x2000
#define MV88E6XXX_PORT_STS_PHY_DETECT 0x1000
+#define MV88E6250_PORT_STS_LINK 0x1000
+#define MV88E6250_PORT_STS_PORTMODE_MASK 0x0f00
+#define MV88E6250_PORT_STS_PORTMODE_PHY_10_HALF 0x0800
+#define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900
+#define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL 0x0a00
+#define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL 0x0b00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF 0x0c00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF 0x0d00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL 0x0e00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL 0x0f00
#define MV88E6XXX_PORT_STS_LINK 0x0800
#define MV88E6XXX_PORT_STS_DUPLEX 0x0400
#define MV88E6XXX_PORT_STS_SPEED_MASK 0x0300
@@ -333,6 +343,8 @@ int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
int mv88e6185_port_link_state(struct mv88e6xxx_chip *chip, int port,
struct phylink_link_state *state);
+int mv88e6250_port_link_state(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_link_state *state);
int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
struct phylink_link_state *state);
int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port);
--
2.20.1
On Mon, Jun 03, 2019 at 02:42:19PM +0000, Rasmus Villemoes wrote:
> The data sheet also mentions the possibility of selecting 200 Mbps for
> the MII ports (ports 5 and 6) by setting the ForceSpd field to
> 0x2 (aka MV88E6065_PORT_MAC_CTL_SPEED_200). However, there's a note
> that "actual speed is determined by bit 8 above", and flipping back a
> page, one finds that bits 13:8 are reserved...
>
> So without further information on what bit 8 means, let's stick to
> supporting just 10 and 100 Mbps on all ports.
200Mbps is also somewhat Marvell Proprietary. I've not seen any other
vendors interfaces supporting it. So i don't think anybody will really
miss it.
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Mon, Jun 03, 2019 at 02:42:20PM +0000, Rasmus Villemoes wrote:
> The mv88e6250 has a rather different way of reporting the link, speed
> and duplex status. A simple difference is that the link bit is bit 12
> rather than bit 11 of the port status register.
>
> It gets more complicated for speed and duplex, which do not have
> separate fields. Instead, there's a four-bit PortMode field, and
> decoding that depends on whether it's a phy or mii port. For the phy
> ports, only four of the 16 values have defined meaning; the rest are
> called "reserved", so returning {SPEED,DUPLEX}_UNKNOWN seems
> reasonable.
>
> For the mii ports, most possible values are documented (0x3 and 0x5
> are reserved), but I'm unable to make sense of them all. Since the
> bits simply reflect the Px_MODE[3:0] configuration pins, just support
> the subset that I'm certain about. Support for other setups can be
> added later.
The code looks sensible and covers the most likely scenarios.
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
> The chip has four per port 16-bits statistics registers, two of which
> correspond to the existing "sw_in_filtered" and "sw_out_filtered" (but
> at offsets 0x13 and 0x10 rather than 0x12 and 0x13, because why should
> this be easy...).
This is Marvell. Nothing is easy, they keep making subtle changes like
this.
> Wiring up those four statistics seems to require
> introducing a STATS_TYPE_PORT_6250 bit or similar, which seems a tad
> ugly, so for now this just allows access to the STATS_TYPE_BANK0 ones.
I don't think it will be too ugly. We have the abstraction in place to
support it. So feel free to add a follow up patch adding these
statistics if you want.
> The chip does have ptp support, and the existing
> mv88e6352_{gpio,avb,ptp}_ops at first glance seem like they would work
> out-of-the-box, but for simplicity (and lack of testing) I'm eliding
> this.
Fine, you can add this later, if you do get a test system.
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Mon, Jun 03, 2019 at 02:42:24PM +0000, Rasmus Villemoes wrote:
> The new mv88e6250_g1_reset() is identical to mv88e6352_g1_reset() except
> for the call of mv88e6352_g1_wait_ppu_polling(), so refactor the 6352
> version in term of the 6250 one. No functional change.
>
> Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Mon, Jun 03, 2019 at 02:42:23PM +0000, Rasmus Villemoes wrote:
> The mv88e6250 has port_base_addr 0x8 or 0x18 (depending on
> configuration pins), so it constitutes a new family and hence needs
> its own compatible string.
>
> Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
From: Rasmus Villemoes <[email protected]>
Date: Mon, 3 Jun 2019 14:42:11 +0000
> This adds support for the mv88e6250 chip.
Please make the rearrangements requested by Andrew in patch #1 and
respin. It looks otherwise ready to go to me :-)