If RC_CORE is not set, building fails:
drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
Reported-by: Hulk Robot <[email protected]>
Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
Signed-off-by: YueHaibing <[email protected]>
---
drivers/media/pci/ttpci/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
index d96d4fa..b705631 100644
--- a/drivers/media/pci/ttpci/Kconfig
+++ b/drivers/media/pci/ttpci/Kconfig
@@ -7,7 +7,7 @@ config DVB_AV7110
depends on DVB_CORE && PCI && I2C
select TTPCI_EEPROM
select VIDEO_SAA7146_VV
- select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
+ select DVB_AV7110_IR if RC_CORE=DVB_AV7110 && (INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110)
depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV
select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
--
2.7.4
On Wed, Jun 12, 2019 at 11:43:10AM +0800, YueHaibing wrote:
> If RC_CORE is not set, building fails:
>
> drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
> av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
> av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
> av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
>
> Reported-by: Hulk Robot <[email protected]>
> Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
> Signed-off-by: YueHaibing <[email protected]>
Thank you for spotting this and writing a patch.
> ---
> drivers/media/pci/ttpci/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
> index d96d4fa..b705631 100644
> --- a/drivers/media/pci/ttpci/Kconfig
> +++ b/drivers/media/pci/ttpci/Kconfig
> @@ -7,7 +7,7 @@ config DVB_AV7110
> depends on DVB_CORE && PCI && I2C
> select TTPCI_EEPROM
> select VIDEO_SAA7146_VV
> - select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
This says if
- select DVB_AV7110_IR if INPUT_EVDEV and DVB_AV7110 are both y or m
- select DVB_AV7110_IR if INPUT_EVDEV=y
This exists for the case when INPUT_EVDEV=y and DVB_AV7110=m, which is fine
> + select DVB_AV7110_IR if RC_CORE=DVB_AV7110 && (INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110)
That's not exactly the same. For one thing it should not longer depend on
INPUT_EVDEV=y.
Now if DVB_AV7110=m and RC_CORE=y is not allowed which should be (this is
the case in Fedora default kernel config for example).
> depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV
> select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
> select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
> --
> 2.7.4
>
Thanks,
Sean
Em Wed, 12 Jun 2019 08:42:55 +0100
Sean Young <[email protected]> escreveu:
> On Wed, Jun 12, 2019 at 11:43:10AM +0800, YueHaibing wrote:
> > If RC_CORE is not set, building fails:
> >
> > drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
> > av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
> > av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
> > av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
> >
> > Reported-by: Hulk Robot <[email protected]>
> > Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
> > Signed-off-by: YueHaibing <[email protected]>
>
> Thank you for spotting this and writing a patch.
>
> > ---
> > drivers/media/pci/ttpci/Kconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
> > index d96d4fa..b705631 100644
> > --- a/drivers/media/pci/ttpci/Kconfig
> > +++ b/drivers/media/pci/ttpci/Kconfig
> > @@ -7,7 +7,7 @@ config DVB_AV7110
> > depends on DVB_CORE && PCI && I2C
> > select TTPCI_EEPROM
> > select VIDEO_SAA7146_VV
> > - select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
>
> This says if
> - select DVB_AV7110_IR if INPUT_EVDEV and DVB_AV7110 are both y or m
> - select DVB_AV7110_IR if INPUT_EVDEV=y
> This exists for the case when INPUT_EVDEV=y and DVB_AV7110=m, which is fine
>
> > + select DVB_AV7110_IR if RC_CORE=DVB_AV7110 && (INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110)
>
> That's not exactly the same. For one thing it should not longer depend on
> INPUT_EVDEV=y.
>
> Now if DVB_AV7110=m and RC_CORE=y is not allowed which should be (this is
> the case in Fedora default kernel config for example).
My suggestion here is to stop using select here, using, instead
a depends on for DVB_AV7110_IR, e. g. something like (untested):
config DVB_AV7110_IR
bool
depends on RC_CORE && DVB_AV7110
default DVB_AV7110
>
> > depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV
> > select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
> > select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
> > --
> > 2.7.4
> >
>
> Thanks,
>
> Sean
Thanks,
Mauro
On Wed, Jun 12, 2019 at 06:37:08AM -0300, Mauro Carvalho Chehab wrote:
> Em Wed, 12 Jun 2019 08:42:55 +0100
> Sean Young <[email protected]> escreveu:
>
> > On Wed, Jun 12, 2019 at 11:43:10AM +0800, YueHaibing wrote:
> > > If RC_CORE is not set, building fails:
> > >
> > > drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
> > > av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
> > > av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
> > > av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
> > >
> > > Reported-by: Hulk Robot <[email protected]>
> > > Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
> > > Signed-off-by: YueHaibing <[email protected]>
> >
> > Thank you for spotting this and writing a patch.
> >
> > > ---
> > > drivers/media/pci/ttpci/Kconfig | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
> > > index d96d4fa..b705631 100644
> > > --- a/drivers/media/pci/ttpci/Kconfig
> > > +++ b/drivers/media/pci/ttpci/Kconfig
> > > @@ -7,7 +7,7 @@ config DVB_AV7110
> > > depends on DVB_CORE && PCI && I2C
> > > select TTPCI_EEPROM
> > > select VIDEO_SAA7146_VV
> > > - select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
> >
> > This says if
> > - select DVB_AV7110_IR if INPUT_EVDEV and DVB_AV7110 are both y or m
> > - select DVB_AV7110_IR if INPUT_EVDEV=y
> > This exists for the case when INPUT_EVDEV=y and DVB_AV7110=m, which is fine
> >
> > > + select DVB_AV7110_IR if RC_CORE=DVB_AV7110 && (INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110)
> >
> > That's not exactly the same. For one thing it should not longer depend on
> > INPUT_EVDEV=y.
> >
> > Now if DVB_AV7110=m and RC_CORE=y is not allowed which should be (this is
> > the case in Fedora default kernel config for example).
>
> My suggestion here is to stop using select here, using, instead
> a depends on for DVB_AV7110_IR, e. g. something like (untested):
>
> config DVB_AV7110_IR
> bool
> depends on RC_CORE && DVB_AV7110
> default DVB_AV7110
Build will fail if RC_CORE=m && DVB_AV7110=y. So it should be
depends on RC_CORE=y || RC_CORE = DVB_AV7110
Thanks,
Sean
Em Wed, 12 Jun 2019 18:56:29 +0100
Sean Young <[email protected]> escreveu:
> On Wed, Jun 12, 2019 at 06:37:08AM -0300, Mauro Carvalho Chehab wrote:
> > Em Wed, 12 Jun 2019 08:42:55 +0100
> > Sean Young <[email protected]> escreveu:
> >
> > > On Wed, Jun 12, 2019 at 11:43:10AM +0800, YueHaibing wrote:
> > > > If RC_CORE is not set, building fails:
> > > >
> > > > drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
> > > > av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
> > > > av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
> > > > av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
> > > >
> > > > Reported-by: Hulk Robot <[email protected]>
> > > > Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
> > > > Signed-off-by: YueHaibing <[email protected]>
> > >
> > > Thank you for spotting this and writing a patch.
> > >
> > > > ---
> > > > drivers/media/pci/ttpci/Kconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
> > > > index d96d4fa..b705631 100644
> > > > --- a/drivers/media/pci/ttpci/Kconfig
> > > > +++ b/drivers/media/pci/ttpci/Kconfig
> > > > @@ -7,7 +7,7 @@ config DVB_AV7110
> > > > depends on DVB_CORE && PCI && I2C
> > > > select TTPCI_EEPROM
> > > > select VIDEO_SAA7146_VV
> > > > - select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
> > >
> > > This says if
> > > - select DVB_AV7110_IR if INPUT_EVDEV and DVB_AV7110 are both y or m
> > > - select DVB_AV7110_IR if INPUT_EVDEV=y
> > > This exists for the case when INPUT_EVDEV=y and DVB_AV7110=m, which is fine
> > >
> > > > + select DVB_AV7110_IR if RC_CORE=DVB_AV7110 && (INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110)
> > >
> > > That's not exactly the same. For one thing it should not longer depend on
> > > INPUT_EVDEV=y.
> > >
> > > Now if DVB_AV7110=m and RC_CORE=y is not allowed which should be (this is
> > > the case in Fedora default kernel config for example).
> >
> > My suggestion here is to stop using select here, using, instead
> > a depends on for DVB_AV7110_IR, e. g. something like (untested):
> >
> > config DVB_AV7110_IR
> > bool
> > depends on RC_CORE && DVB_AV7110
> > default DVB_AV7110
As I said, this was untested.
> Build will fail if RC_CORE=m && DVB_AV7110=y. So it should be
>
> depends on RC_CORE=y || RC_CORE = DVB_AV7110
Works for me.
That's a lot cleaner and easier to understand than what
we currently have.
Thanks,
Mauro
If RC_CORE is not set, building fails:
drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
Reported-by: Hulk Robot <[email protected]>
Suggested-by: Sean Young <[email protected]>
Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
Signed-off-by: YueHaibing <[email protected]>
---
v2: use depends on DVB_AV7110_IR instead of select as Sean Young's suggestion
---
drivers/media/pci/ttpci/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
index d96d4fa..8a362ee 100644
--- a/drivers/media/pci/ttpci/Kconfig
+++ b/drivers/media/pci/ttpci/Kconfig
@@ -1,13 +1,14 @@
# SPDX-License-Identifier: GPL-2.0-only
config DVB_AV7110_IR
bool
+ depends on RC_CORE=y || RC_CORE = DVB_AV7110
+ default DVB_AV7110
config DVB_AV7110
tristate "AV7110 cards"
depends on DVB_CORE && PCI && I2C
select TTPCI_EEPROM
select VIDEO_SAA7146_VV
- select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV
select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
--
2.7.4
On 2019/6/13 1:56, Sean Young wrote:
> On Wed, Jun 12, 2019 at 06:37:08AM -0300, Mauro Carvalho Chehab wrote:
>> Em Wed, 12 Jun 2019 08:42:55 +0100
>> Sean Young <[email protected]> escreveu:
>>
>>> On Wed, Jun 12, 2019 at 11:43:10AM +0800, YueHaibing wrote:
>>>> If RC_CORE is not set, building fails:
>>>>
>>>> drivers/media/pci/ttpci/av7110_ir.o: In function `av7110_ir_init':
>>>> av7110_ir.c:(.text+0x1b0): undefined reference to `rc_allocate_device'
>>>> av7110_ir.c:(.text+0x2c1): undefined reference to `rc_register_device'
>>>> av7110_ir.c:(.text+0x2dc): undefined reference to `rc_free_device'
>>>>
>>>> Reported-by: Hulk Robot <[email protected]>
>>>> Fixes: 71f49a8bf5c5 ("media: ttpci: use rc-core for the IR receiver")
>>>> Signed-off-by: YueHaibing <[email protected]>
>>>
>>> Thank you for spotting this and writing a patch.
>>>
>>>> ---
>>>> drivers/media/pci/ttpci/Kconfig | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
>>>> index d96d4fa..b705631 100644
>>>> --- a/drivers/media/pci/ttpci/Kconfig
>>>> +++ b/drivers/media/pci/ttpci/Kconfig
>>>> @@ -7,7 +7,7 @@ config DVB_AV7110
>>>> depends on DVB_CORE && PCI && I2C
>>>> select TTPCI_EEPROM
>>>> select VIDEO_SAA7146_VV
>>>> - select DVB_AV7110_IR if INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110
>>>
>>> This says if
>>> - select DVB_AV7110_IR if INPUT_EVDEV and DVB_AV7110 are both y or m
>>> - select DVB_AV7110_IR if INPUT_EVDEV=y
>>> This exists for the case when INPUT_EVDEV=y and DVB_AV7110=m, which is fine
>>>
>>>> + select DVB_AV7110_IR if RC_CORE=DVB_AV7110 && (INPUT_EVDEV=y || INPUT_EVDEV=DVB_AV7110)
>>>
>>> That's not exactly the same. For one thing it should not longer depend on
>>> INPUT_EVDEV=y.
>>>
>>> Now if DVB_AV7110=m and RC_CORE=y is not allowed which should be (this is
>>> the case in Fedora default kernel config for example).
>>
>> My suggestion here is to stop using select here, using, instead
>> a depends on for DVB_AV7110_IR, e. g. something like (untested):
>>
>> config DVB_AV7110_IR
>> bool
>> depends on RC_CORE && DVB_AV7110
>> default DVB_AV7110
>
> Build will fail if RC_CORE=m && DVB_AV7110=y. So it should be
>
> depends on RC_CORE=y || RC_CORE = DVB_AV7110
Thanks, will test and send v2 as your suggestion.
>
>
> Thanks,
>
> Sean
>
> .
>