Drop redundant I2C properties that are already specified in
vf610-zii-dev.dtsi
Signed-off-by: Andrey Smirnov <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Chris Healy <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 48086c5e8549..e500911ce0a5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -323,11 +323,6 @@
};
&i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- status = "okay";
-
gpio5: io-expander@20 {
compatible = "nxp,pca9554";
reg = <0x20>;
@@ -350,11 +345,6 @@
};
&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
tca9548@70 {
compatible = "nxp,pca9548";
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
--
2.21.0
On Mon, Aug 19, 2019 at 08:19:52PM -0700, Andrey Smirnov wrote:
> Drop redundant I2C properties that are already specified in
> vf610-zii-dev.dtsi
>
> Signed-off-by: Andrey Smirnov <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: Chris Healy <[email protected]>
> Cc: Fabio Estevam <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
> arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 10 ----------
> 1 file changed, 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> index 48086c5e8549..e500911ce0a5 100644
> --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> @@ -323,11 +323,6 @@
> };
>
> &i2c0 {
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c0>;
pinctrl for i2c0 is not same as what vf610-zii-dev.dtsi has.
Shawn
> - status = "okay";
> -
> gpio5: io-expander@20 {
> compatible = "nxp,pca9554";
> reg = <0x20>;
> @@ -350,11 +345,6 @@
> };
>
> &i2c2 {
> - clock-frequency = <100000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2>;
> - status = "okay";
> -
> tca9548@70 {
> compatible = "nxp,pca9548";
> pinctrl-0 = <&pinctrl_i2c_mux_reset>;
> --
> 2.21.0
>
On Sat, Aug 24, 2019 at 12:12 PM Shawn Guo <[email protected]> wrote:
>
> On Mon, Aug 19, 2019 at 08:19:52PM -0700, Andrey Smirnov wrote:
> > Drop redundant I2C properties that are already specified in
> > vf610-zii-dev.dtsi
> >
> > Signed-off-by: Andrey Smirnov <[email protected]>
> > Cc: Shawn Guo <[email protected]>
> > Cc: Chris Healy <[email protected]>
> > Cc: Fabio Estevam <[email protected]>
> > Cc: [email protected]
> > Cc: [email protected]
> > ---
> > arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 10 ----------
> > 1 file changed, 10 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> > index 48086c5e8549..e500911ce0a5 100644
> > --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> > +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> > @@ -323,11 +323,6 @@
> > };
> >
> > &i2c0 {
> > - clock-frequency = <100000>;
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_i2c0>;
>
> pinctrl for i2c0 is not same as what vf610-zii-dev.dtsi has.
The only difference I can see is in pinctrl-names so I am assuming
that's what you mean. Not configuring I2C recovery on Rev B board was
not intentional. I'll update commit log in v2.
Thanks,
Andrey Smirnov