From: Ben Chuang <[email protected]>
The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
setup as part of the internal clock setup as described in 3.2.1 Internal
Clock Setup Sequence of SD Host Controller Simplified Specification
Version 4.20.
Signed-off-by: Ben Chuang <[email protected]>
Co-developed-by: Michael K Johnson <[email protected]>
Signed-off-by: Michael K Johnson <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
---
drivers/mmc/host/sdhci.c | 23 +++++++++++++++++++++++
drivers/mmc/host/sdhci.h | 1 +
2 files changed, 24 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index bed0760a6c2a..9106ebc7a422 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1653,6 +1653,29 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
udelay(10);
}
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode) {
+ clk |= SDHCI_CLOCK_PLL_EN;
+ clk &= ~SDHCI_CLOCK_INT_STABLE;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 150 ms */
+ timeout = ktime_add_ms(ktime_get(), 150);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (clk & SDHCI_CLOCK_INT_STABLE)
+ break;
+ if (timedout) {
+ pr_err("%s: PLL clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+ }
+
clk |= SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 199712e7adbb..72601a4d2e95 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -114,6 +114,7 @@
#define SDHCI_DIV_HI_MASK 0x300
#define SDHCI_PROG_CLOCK_MODE 0x0020
#define SDHCI_CLOCK_CARD_EN 0x0004
+#define SDHCI_CLOCK_PLL_EN 0x0008
#define SDHCI_CLOCK_INT_STABLE 0x0002
#define SDHCI_CLOCK_INT_EN 0x0001
--
2.22.1