Implement sparsemem support for Risc-v which helps pave the
way for memory hotplug and eventually P2P support.
Introduce Kconfig options for virtual and physical address bits which
are used to calculate the size of the vmemmap and set the
MAX_PHYSMEM_BITS.
The vmemmap is located directly before the VMALLOC region and sized
such that we can allocate enough pages to populate all the virtual
address space in the system (similar to the way it's done in arm64).
During initialization, call memblocks_present() and sparse_init(),
and provide a stub for vmemmap_populate() (all of which is similar to
arm64).
[[email protected]:
fixed pfn_valid, FIXADDR_TOP and fixed a bug rebasing onto v5.3]
Signed-off-by: Greentime Hu <[email protected]>
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Andrew Waterman <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: Michael Clark <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Zong Li <[email protected]>
---
arch/riscv/Kconfig | 21 +++++++++++++++++++++
arch/riscv/include/asm/fixmap.h | 2 +-
arch/riscv/include/asm/page.h | 2 ++
arch/riscv/include/asm/pgtable.h | 21 +++++++++++++++++----
arch/riscv/include/asm/sparsemem.h | 11 +++++++++++
arch/riscv/mm/init.c | 10 ++++++++++
6 files changed, 62 insertions(+), 5 deletions(-)
create mode 100644 arch/riscv/include/asm/sparsemem.h
Changes in v6:
* Rebased onto v5.3-rc6 (no changes)
* Fixed up commit message wording (per Mike's feedback)
* Set SPARSEMEM_STATIC for 32BIT builds (per Mike)
Changes in v5:
* Rebased onto v5.3-rc5 (required moving the initialization to
after setup_vm_final() in paging_init())
* Fixed FIXADDR_TOP value (per Greentime)
* Use generic pfn_valid() function for sparsemem to fix a bug
with having holes in memory (also Greentime)
Changes in v4:
* Rebased onto v5.0-rc1
* Changed the SECTION_SIZE_BITS to 27, per Nick Kossifidis
Changes in v3 (only sent the common patches):
* Rebased on v4.20-rc1
* Minor fixups
* Collected Ack from Will Deacon
Changes in v2:
* Rebase on v4.19-rc8
* Move the STRUCT_PAGE_MAX_SHIFT define into a common header (near
the definition of struct page). As suggested by Christoph.
* Clean up the unnecessary nid variable in the memblocks_present()
function, per Christoph.
* Collected tags from Palmer and Catalin.
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 59a4727ecd6c..53b7556beb4a 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -54,6 +54,7 @@ config RISCV
select EDAC_SUPPORT
select ARCH_HAS_GIGANTIC_PAGE
select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
+ select SPARSEMEM_STATIC if 32BIT
config MMU
def_bool y
@@ -62,12 +63,32 @@ config ZONE_DMA32
bool
default y if 64BIT
+config VA_BITS
+ int
+ default 32 if 32BIT
+ default 39 if 64BIT
+
+config PA_BITS
+ int
+ default 34 if 32BIT
+ default 56 if 64BIT
+
config PAGE_OFFSET
hex
default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool ARCH_SPARSEMEM_ENABLE
+
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
index 9c66033c3a54..7b0259c044c9 100644
--- a/arch/riscv/include/asm/fixmap.h
+++ b/arch/riscv/include/asm/fixmap.h
@@ -31,7 +31,7 @@ enum fixed_addresses {
};
#define FIXADDR_SIZE (__end_of_fixed_addresses * PAGE_SIZE)
-#define FIXADDR_TOP (VMALLOC_START)
+#define FIXADDR_TOP (VMEMMAP_START)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
#define FIXMAP_PAGE_IO PAGE_KERNEL
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 707e00a8430b..3db261c4810f 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -110,8 +110,10 @@ extern unsigned long min_low_pfn;
#define page_to_bus(page) (page_to_phys(page))
#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
+#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) \
(((pfn) >= pfn_base) && (((pfn)-pfn_base) < max_mapnr))
+#endif
#define ARCH_PFN_OFFSET (pfn_base)
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index a364aba23d55..dbc19e61ee66 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -83,6 +83,23 @@ extern pgd_t swapper_pg_dir[];
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
+#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
+#define VMALLOC_END (PAGE_OFFSET - 1)
+#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
+
+/*
+ * Roughly size the vmemmap space to be large enough to fit enough
+ * struct pages to map half the virtual address space. Then
+ * position vmemmap directly below the VMALLOC region.
+ */
+#define VMEMMAP_SHIFT \
+ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
+#define VMEMMAP_SIZE (1UL << VMEMMAP_SHIFT)
+#define VMEMMAP_END (VMALLOC_START - 1)
+#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
+
+#define vmemmap ((struct page *)VMEMMAP_START)
+
/*
* ZERO_PAGE is a global shared page that is always zero,
* used for zero-mapped memory areas, etc.
@@ -416,10 +433,6 @@ static inline void pgtable_cache_init(void)
/* No page table caches to initialize */
}
-#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
-#define VMALLOC_END (PAGE_OFFSET - 1)
-#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
-
/*
* Task size is 0x4000000000 for RV64 or 0xb800000 for RV32.
* Note that PGDIR_SIZE must evenly divide TASK_SIZE.
diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h
new file mode 100644
index 000000000000..b58ba2d9ed6e
--- /dev/null
+++ b/arch/riscv/include/asm/sparsemem.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_SPARSEMEM_H
+#define __ASM_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
+#define SECTION_SIZE_BITS 27
+#endif /* CONFIG_SPARSEMEM */
+
+#endif /* __ASM_SPARSEMEM_H */
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 42bf939693d3..73f40c9d3dee 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -442,6 +442,16 @@ static void __init setup_vm_final(void)
void __init paging_init(void)
{
setup_vm_final();
+ memblocks_present();
+ sparse_init();
setup_zero_page();
zone_sizes_init();
}
+
+#ifdef CONFIG_SPARSEMEM
+int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
+ struct vmem_altmap *altmap)
+{
+ return vmemmap_populate_basepages(start, end, node);
+}
+#endif
--
2.20.1
On Wed, Aug 28, 2019 at 03:40:54PM -0600, Logan Gunthorpe wrote:
> Implement sparsemem support for Risc-v which helps pave the
> way for memory hotplug and eventually P2P support.
>
> Introduce Kconfig options for virtual and physical address bits which
> are used to calculate the size of the vmemmap and set the
> MAX_PHYSMEM_BITS.
>
> The vmemmap is located directly before the VMALLOC region and sized
> such that we can allocate enough pages to populate all the virtual
> address space in the system (similar to the way it's done in arm64).
>
> During initialization, call memblocks_present() and sparse_init(),
> and provide a stub for vmemmap_populate() (all of which is similar to
> arm64).
>
> [[email protected]:
> fixed pfn_valid, FIXADDR_TOP and fixed a bug rebasing onto v5.3]
> Signed-off-by: Greentime Hu <[email protected]>
> Signed-off-by: Logan Gunthorpe <[email protected]>
> Reviewed-by: Palmer Dabbelt <[email protected]>
> Reviewed-by: Christoph Hellwig <[email protected]>
> Cc: Albert Ou <[email protected]>
> Cc: Andrew Waterman <[email protected]>
> Cc: Olof Johansson <[email protected]>
> Cc: Michael Clark <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Zong Li <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
> ---
> arch/riscv/Kconfig | 21 +++++++++++++++++++++
> arch/riscv/include/asm/fixmap.h | 2 +-
> arch/riscv/include/asm/page.h | 2 ++
> arch/riscv/include/asm/pgtable.h | 21 +++++++++++++++++----
> arch/riscv/include/asm/sparsemem.h | 11 +++++++++++
> arch/riscv/mm/init.c | 10 ++++++++++
> 6 files changed, 62 insertions(+), 5 deletions(-)
> create mode 100644 arch/riscv/include/asm/sparsemem.h
>
> Changes in v6:
> * Rebased onto v5.3-rc6 (no changes)
> * Fixed up commit message wording (per Mike's feedback)
> * Set SPARSEMEM_STATIC for 32BIT builds (per Mike)
>
> Changes in v5:
> * Rebased onto v5.3-rc5 (required moving the initialization to
> after setup_vm_final() in paging_init())
> * Fixed FIXADDR_TOP value (per Greentime)
> * Use generic pfn_valid() function for sparsemem to fix a bug
> with having holes in memory (also Greentime)
>
> Changes in v4:
> * Rebased onto v5.0-rc1
> * Changed the SECTION_SIZE_BITS to 27, per Nick Kossifidis
>
> Changes in v3 (only sent the common patches):
> * Rebased on v4.20-rc1
> * Minor fixups
> * Collected Ack from Will Deacon
>
> Changes in v2:
> * Rebase on v4.19-rc8
> * Move the STRUCT_PAGE_MAX_SHIFT define into a common header (near
> the definition of struct page). As suggested by Christoph.
> * Clean up the unnecessary nid variable in the memblocks_present()
> function, per Christoph.
> * Collected tags from Palmer and Catalin.
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 59a4727ecd6c..53b7556beb4a 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -54,6 +54,7 @@ config RISCV
> select EDAC_SUPPORT
> select ARCH_HAS_GIGANTIC_PAGE
> select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
> + select SPARSEMEM_STATIC if 32BIT
>
> config MMU
> def_bool y
> @@ -62,12 +63,32 @@ config ZONE_DMA32
> bool
> default y if 64BIT
>
> +config VA_BITS
> + int
> + default 32 if 32BIT
> + default 39 if 64BIT
> +
> +config PA_BITS
> + int
> + default 34 if 32BIT
> + default 56 if 64BIT
> +
> config PAGE_OFFSET
> hex
> default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
> default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
> default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
>
> +config ARCH_FLATMEM_ENABLE
> + def_bool y
> +
> +config ARCH_SPARSEMEM_ENABLE
> + def_bool y
> + select SPARSEMEM_VMEMMAP_ENABLE
> +
> +config ARCH_SELECT_MEMORY_MODEL
> + def_bool ARCH_SPARSEMEM_ENABLE
> +
> config ARCH_WANT_GENERAL_HUGETLB
> def_bool y
>
> diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
> index 9c66033c3a54..7b0259c044c9 100644
> --- a/arch/riscv/include/asm/fixmap.h
> +++ b/arch/riscv/include/asm/fixmap.h
> @@ -31,7 +31,7 @@ enum fixed_addresses {
> };
>
> #define FIXADDR_SIZE (__end_of_fixed_addresses * PAGE_SIZE)
> -#define FIXADDR_TOP (VMALLOC_START)
> +#define FIXADDR_TOP (VMEMMAP_START)
> #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
>
> #define FIXMAP_PAGE_IO PAGE_KERNEL
> diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
> index 707e00a8430b..3db261c4810f 100644
> --- a/arch/riscv/include/asm/page.h
> +++ b/arch/riscv/include/asm/page.h
> @@ -110,8 +110,10 @@ extern unsigned long min_low_pfn;
> #define page_to_bus(page) (page_to_phys(page))
> #define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
>
> +#ifdef CONFIG_FLATMEM
> #define pfn_valid(pfn) \
> (((pfn) >= pfn_base) && (((pfn)-pfn_base) < max_mapnr))
> +#endif
>
> #define ARCH_PFN_OFFSET (pfn_base)
>
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index a364aba23d55..dbc19e61ee66 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -83,6 +83,23 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +/*
> + * Roughly size the vmemmap space to be large enough to fit enough
> + * struct pages to map half the virtual address space. Then
> + * position vmemmap directly below the VMALLOC region.
> + */
> +#define VMEMMAP_SHIFT \
> + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> +#define VMEMMAP_SIZE (1UL << VMEMMAP_SHIFT)
> +#define VMEMMAP_END (VMALLOC_START - 1)
> +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> +
> +#define vmemmap ((struct page *)VMEMMAP_START)
> +
> /*
> * ZERO_PAGE is a global shared page that is always zero,
> * used for zero-mapped memory areas, etc.
> @@ -416,10 +433,6 @@ static inline void pgtable_cache_init(void)
> /* No page table caches to initialize */
> }
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -
> /*
> * Task size is 0x4000000000 for RV64 or 0xb800000 for RV32.
> * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h
> new file mode 100644
> index 000000000000..b58ba2d9ed6e
> --- /dev/null
> +++ b/arch/riscv/include/asm/sparsemem.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __ASM_SPARSEMEM_H
> +#define __ASM_SPARSEMEM_H
> +
> +#ifdef CONFIG_SPARSEMEM
> +#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
> +#define SECTION_SIZE_BITS 27
> +#endif /* CONFIG_SPARSEMEM */
> +
> +#endif /* __ASM_SPARSEMEM_H */
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 42bf939693d3..73f40c9d3dee 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -442,6 +442,16 @@ static void __init setup_vm_final(void)
> void __init paging_init(void)
> {
> setup_vm_final();
> + memblocks_present();
> + sparse_init();
> setup_zero_page();
> zone_sizes_init();
> }
> +
> +#ifdef CONFIG_SPARSEMEM
> +int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
> + struct vmem_altmap *altmap)
> +{
> + return vmemmap_populate_basepages(start, end, node);
> +}
> +#endif
> --
> 2.20.1
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Sincerely yours,
Mike.
> diff --git a/arch/riscv/include/asm/fixmap.h b/arch/riscv/include/asm/fixmap.h
> index 9c66033c3a54..7b0259c044c9 100644
> --- a/arch/riscv/include/asm/fixmap.h
> +++ b/arch/riscv/include/asm/fixmap.h
> @@ -31,7 +31,7 @@ enum fixed_addresses {
> };
>
> #define FIXADDR_SIZE (__end_of_fixed_addresses * PAGE_SIZE)
> -#define FIXADDR_TOP (VMALLOC_START)
> +#define FIXADDR_TOP (VMEMMAP_START)
> #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
Note that this actually changes again in the fixes branch that
is targeted for 5.3. Not actually conflicting your functionality,
but the FIXADDR_TOP definition moves to pgtable.h.
Otherwise this still looks fine.
On 2019-08-29 12:21 a.m., Mike Rapoport wrote:
> On Wed, Aug 28, 2019 at 03:40:54PM -0600, Logan Gunthorpe wrote:
>> Implement sparsemem support for Risc-v which helps pave the
>> way for memory hotplug and eventually P2P support.
>>
>> Introduce Kconfig options for virtual and physical address bits which
>> are used to calculate the size of the vmemmap and set the
>> MAX_PHYSMEM_BITS.
>>
>> The vmemmap is located directly before the VMALLOC region and sized
>> such that we can allocate enough pages to populate all the virtual
>> address space in the system (similar to the way it's done in arm64).
>>
>> During initialization, call memblocks_present() and sparse_init(),
>> and provide a stub for vmemmap_populate() (all of which is similar to
>> arm64).
>>
>> [[email protected]:
>> fixed pfn_valid, FIXADDR_TOP and fixed a bug rebasing onto v5.3]
>> Signed-off-by: Greentime Hu <[email protected]>
>> Signed-off-by: Logan Gunthorpe <[email protected]>
>> Reviewed-by: Palmer Dabbelt <[email protected]>
>> Reviewed-by: Christoph Hellwig <[email protected]>
>> Cc: Albert Ou <[email protected]>
>> Cc: Andrew Waterman <[email protected]>
>> Cc: Olof Johansson <[email protected]>
>> Cc: Michael Clark <[email protected]>
>> Cc: Rob Herring <[email protected]>
>> Cc: Zong Li <[email protected]>
>
> Reviewed-by: Mike Rapoport <[email protected]>
Thanks!
Logan
Hi Logan,
On Wed, 28 Aug 2019, Logan Gunthorpe wrote:
> Implement sparsemem support for Risc-v which helps pave the
> way for memory hotplug and eventually P2P support.
Thanks very much for following up on this patch set.
One question:
> diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h
> new file mode 100644
> index 000000000000..b58ba2d9ed6e
> --- /dev/null
> +++ b/arch/riscv/include/asm/sparsemem.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __ASM_SPARSEMEM_H
> +#define __ASM_SPARSEMEM_H
> +
> +#ifdef CONFIG_SPARSEMEM
> +#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
> +#define SECTION_SIZE_BITS 27
Do you have a specific rationale behind this selection, or is this simply
a reasonable starting point?
> +#endif /* CONFIG_SPARSEMEM */
> +
> +#endif /* __ASM_SPARSEMEM_H */
The following is what I'm getting ready to queue.
- Paul
From: Logan Gunthorpe <[email protected]>
Date: Wed, 28 Aug 2019 15:40:54 -0600
Subject: [PATCH] RISC-V: Implement sparsemem
Implement sparsemem support for Risc-v which helps pave the
way for memory hotplug and eventually P2P support.
Introduce Kconfig options for virtual and physical address bits which
are used to calculate the size of the vmemmap and set the
MAX_PHYSMEM_BITS.
The vmemmap is located directly before the VMALLOC region and sized
such that we can allocate enough pages to populate all the virtual
address space in the system (similar to the way it's done in arm64).
During initialization, call memblocks_present() and sparse_init(),
and provide a stub for vmemmap_populate() (all of which is similar to
arm64).
[[email protected]: fixed pfn_valid, FIXADDR_TOP and fixed a bug
rebasing onto v5.3]
Signed-off-by: Greentime Hu <[email protected]>
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Andrew Waterman <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: Michael Clark <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Zong Li <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
[[email protected]: updated to apply; minor commit message
reformat]
Signed-off-by: Paul Walmsley <[email protected]>
---
arch/riscv/Kconfig | 21 +++++++++++++++++++++
arch/riscv/include/asm/page.h | 2 ++
arch/riscv/include/asm/pgtable.h | 13 +++++++++++++
arch/riscv/include/asm/sparsemem.h | 11 +++++++++++
arch/riscv/mm/init.c | 10 ++++++++++
5 files changed, 57 insertions(+)
create mode 100644 arch/riscv/include/asm/sparsemem.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 59a4727ecd6c..53b7556beb4a 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -54,6 +54,7 @@ config RISCV
select EDAC_SUPPORT
select ARCH_HAS_GIGANTIC_PAGE
select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
+ select SPARSEMEM_STATIC if 32BIT
config MMU
def_bool y
@@ -62,12 +63,32 @@ config ZONE_DMA32
bool
default y if 64BIT
+config VA_BITS
+ int
+ default 32 if 32BIT
+ default 39 if 64BIT
+
+config PA_BITS
+ int
+ default 34 if 32BIT
+ default 56 if 64BIT
+
config PAGE_OFFSET
hex
default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool ARCH_SPARSEMEM_ENABLE
+
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 707e00a8430b..3db261c4810f 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -110,8 +110,10 @@ extern unsigned long min_low_pfn;
#define page_to_bus(page) (page_to_phys(page))
#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
+#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) \
(((pfn) >= pfn_base) && (((pfn)-pfn_base) < max_mapnr))
+#endif
#define ARCH_PFN_OFFSET (pfn_base)
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index c24a083b3e12..80905b27ee98 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -83,6 +83,19 @@ extern pgd_t swapper_pg_dir[];
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
+/*
+ * Roughly size the vmemmap space to be large enough to fit enough
+ * struct pages to map half the virtual address space. Then
+ * position vmemmap directly below the VMALLOC region.
+ */
+#define VMEMMAP_SHIFT \
+ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
+#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
+#define VMEMMAP_END (VMALLOC_START - 1)
+#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
+
+#define vmemmap ((struct page *)VMEMMAP_START)
+
/*
* ZERO_PAGE is a global shared page that is always zero,
* used for zero-mapped memory areas, etc.
diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h
new file mode 100644
index 000000000000..b58ba2d9ed6e
--- /dev/null
+++ b/arch/riscv/include/asm/sparsemem.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_SPARSEMEM_H
+#define __ASM_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
+#define SECTION_SIZE_BITS 27
+#endif /* CONFIG_SPARSEMEM */
+
+#endif /* __ASM_SPARSEMEM_H */
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 42bf939693d3..73f40c9d3dee 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -442,6 +442,16 @@ static void __init setup_vm_final(void)
void __init paging_init(void)
{
setup_vm_final();
+ memblocks_present();
+ sparse_init();
setup_zero_page();
zone_sizes_init();
}
+
+#ifdef CONFIG_SPARSEMEM
+int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
+ struct vmem_altmap *altmap)
+{
+ return vmemmap_populate_basepages(start, end, node);
+}
+#endif
--
2.23.0
On 2019-08-29 5:38 p.m., Paul Walmsley wrote:
>> +#ifdef CONFIG_SPARSEMEM
>> +#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
>> +#define SECTION_SIZE_BITS 27
>
> Do you have a specific rationale behind this selection, or is this simply
> a reasonable starting point?
It's inline with what other platforms are doing. So in some ways it's a
reasonable starting point but I don't see any reason to change it in the
near term.
>> +#endif /* CONFIG_SPARSEMEM */
>> +
>> +#endif /* __ASM_SPARSEMEM_H */
>
> The following is what I'm getting ready to queue.
Great, thanks!
Logan