Changes since v5:
- covert the documents to yaml
- fine tune boe, tv101wum-n53 panel video timine
Changes since v4:
- add auo,b101uan08.3 panel for this driver.
- add boe,tv101wum-n53 panel for this driver.
Changes since v3:
- remove check enable_gpio.
- fine tune the auo,kd101n80-45na panel's power on timing.
Changes since v2:
- correct the panel size
- remove blank line in Kconfig
- move auo,kd101n80-45na panel driver in this series.
Changes since v1:
- update typo nl6 -> n16.
- update new panel config and makefile are added in alphabetically order.
- add the panel mode and panel info in driver data.
- merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver
Jitao Shi (8):
dt-bindings: display: panel: Add BOE tv101wum-n16 panel bindings
drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel
dt-bindings: display: panel: add auo kd101n80-45na panel bindings
drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel
dt-bindings: display: panel: add boe tv101wum-n53 panel documentation
drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel
dt-bindings: display: panel: add AUO auo,b101uan08.3 panel
documentation
drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel
.../display/panel/auo,b101uan08.3.yaml | 67 ++
.../display/panel/auo,kd101n80-45na.yaml | 67 ++
.../display/panel/boe,tv101wum-n53.yaml | 67 ++
.../display/panel/boe,tv101wum-nl6.yaml | 67 ++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 876 ++++++++++++++++++
7 files changed, 1154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
--
2.21.0
Add documentation for boe tv101wum-n16 panel.
Signed-off-by: Jitao Shi <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
.../display/panel/boe,tv101wum-nl6.yaml | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 000000000000..31d394054181
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-Nl6 DSI Display Panel
+
+maintainers:
+ - Thierry Reding <[email protected]>
+ - Sam Ravnborg <[email protected]>
+ - Rob Herring <[email protected]>
+
+properties:
+ compatible:
+ const: boe,tv101wum-nl6
+
+ reg:
+ description: the virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: a GPIO spec for the enable pin
+
+ pp1800-supply:
+ description: core voltage supply
+
+ avdd-supply:
+ description: phandle of the regulator that provides positive voltage
+
+ avee-supply:
+ description: phandle of the regulator that provides negative voltage
+
+ backlight:
+ description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ &dsi {
+ panel@0 {
+ compatible = "boe,tv101wum-nl6";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
\ No newline at end of file
--
2.21.0
Add documentation for auo kd101n80-45na panel.
Signed-off-by: Jitao Shi <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
.../display/panel/auo,kd101n80-45na.yaml | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
new file mode 100644
index 000000000000..caf82765fa0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,kd101n80-45na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO KD101N80-45NA DSI Display Panel
+
+maintainers:
+ - Thierry Reding <[email protected]>
+ - Sam Ravnborg <[email protected]>
+ - Rob Herring <[email protected]>
+
+properties:
+ compatible:
+ const: auo,kd101n80-45na
+
+ reg:
+ description: the virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: a GPIO spec for the enable pin
+
+ pp1800-supply:
+ description: core voltage supply
+
+ avdd-supply:
+ description: phandle of the regulator that provides positive voltage
+
+ avee-supply:
+ description: phandle of the regulator that provides negative voltage
+
+ backlight:
+ description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ &dsi {
+ panel@0 {
+ compatible = "auo,kd101n80-45na";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
\ No newline at end of file
--
2.21.0
Add dcumentation for boe,tv101wum-n53, which is mipi dsi video panel
and resolution is 1200x1920.
Signed-off-by: Jitao Shi <[email protected]>
---
.../display/panel/boe,tv101wum-n53.yaml | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
new file mode 100644
index 000000000000..f541446fc70c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-n53.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-N53 DSI Display Panel
+
+maintainers:
+ - Thierry Reding <[email protected]>
+ - Sam Ravnborg <[email protected]>
+ - Rob Herring <[email protected]>
+
+properties:
+ compatible:
+ const: boe,tv101wum-n53
+
+ reg:
+ description: the virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: a GPIO spec for the enable pin
+
+ pp1800-supply:
+ description: core voltage supply
+
+ avdd-supply:
+ description: phandle of the regulator that provides positive voltage
+
+ avee-supply:
+ description: phandle of the regulator that provides negative voltage
+
+ backlight:
+ description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ &dsi {
+ panel@0 {
+ compatible = "boe,tv101wum-n53";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
\ No newline at end of file
--
2.21.0
Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <[email protected]>
---
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index f80974778360..c757035ac09c 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -621,6 +621,34 @@ static const struct panel_desc auo_kd101n80_45na_desc = {
.discharge_on_disable = true,
};
+static const struct drm_display_mode boe_tv101wum_n53_default_mode = {
+ .clock = 159833,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 114,
+ .hsync_end = 1200 + 114 + 10,
+ .htotal = 1200 + 114 + 10 + 40,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 19,
+ .vsync_end = 1920 + 19 + 4,
+ .vtotal = 1920 + 19 + 4 + 10,
+ .vrefresh = 60,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc boe_tv101wum_n53_desc = {
+ .modes = &boe_tv101wum_n53_default_mode,
+ .bpc = 8,
+ .size = {
+ .width_mm = 135,
+ .height_mm = 216,
+ },
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM,
+ .init_cmds = boe_init_cmd,
+};
+
static int boe_panel_get_modes(struct drm_panel *panel)
{
struct boe_panel *boe = to_boe_panel(panel);
@@ -747,6 +775,9 @@ static const struct of_device_id boe_of_match[] = {
{ .compatible = "auo,kd101n80-45na",
.data = &auo_kd101n80_45na_desc
},
+ { .compatible = "boe,tv101wum-n53",
+ .data = &boe_tv101wum_n53_desc
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, boe_of_match);
--
2.21.0
Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 6 +-
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 86 ++++++++++++++++---
2 files changed, 75 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index afcadb3585fb..0e887c978796 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -19,13 +19,13 @@ config DRM_PANEL_ARM_VERSATILE
in the Versatile family syscon registers.
config DRM_PANEL_BOE_TV101WUM_NL6
- tristate "BOE TV101WUM 1200x1920 panel"
+ tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
- Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
- DSI Video Mode panel
+ Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
+ 45NA WUXGA PANEL DSI Video Mode panel
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index e27529b80d78..f80974778360 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -35,6 +35,7 @@ struct panel_desc {
enum mipi_dsi_pixel_format format;
const struct panel_init_cmd *init_cmds;
unsigned int lanes;
+ bool discharge_on_disable;
};
struct boe_panel {
@@ -372,6 +373,15 @@ static const struct panel_init_cmd boe_init_cmd[] = {
{},
};
+static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
+ _INIT_DELAY_CMD(24),
+ _INIT_DCS_CMD(0x11),
+ _INIT_DELAY_CMD(120),
+ _INIT_DCS_CMD(0x29),
+ _INIT_DELAY_CMD(120),
+ {},
+};
+
static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
{
return container_of(panel, struct boe_panel, base);
@@ -449,20 +459,30 @@ static int boe_panel_unprepare(struct drm_panel *panel)
if (!boe->prepared)
return 0;
- ret = boe_panel_off(boe);
- if (ret < 0) {
- dev_err(panel->dev, "failed to set panel off: %d\n", ret);
- return ret;
+ if (boe->desc->discharge_on_disable) {
+ msleep(150);
+ regulator_disable(boe->avee);
+ regulator_disable(boe->avdd);
+ usleep_range(5000, 7000);
+ gpiod_set_value(boe->enable_gpio, 0);
+ usleep_range(5000, 7000);
+ regulator_disable(boe->pp1800);
+ } else {
+ ret = boe_panel_off(boe);
+ if (ret < 0) {
+ dev_err(panel->dev, "failed to set panel off: %d\n",
+ ret);
+ return ret;
+ }
+ msleep(150);
+ gpiod_set_value(boe->enable_gpio, 0);
+ usleep_range(500, 1000);
+ regulator_disable(boe->avee);
+ regulator_disable(boe->avdd);
+ usleep_range(5000, 7000);
+ regulator_disable(boe->pp1800);
}
- msleep(150);
- gpiod_set_value(boe->enable_gpio, 0);
- usleep_range(500, 1000);
- regulator_disable(boe->avee);
- regulator_disable(boe->avdd);
- usleep_range(5000, 7000);
- regulator_disable(boe->pp1800);
-
boe->prepared = false;
return 0;
@@ -492,10 +512,14 @@ static int boe_panel_prepare(struct drm_panel *panel)
if (ret < 0)
goto poweroffavdd;
- msleep(100);
+ usleep_range(5000, 10000);
gpiod_set_value(boe->enable_gpio, 1);
- usleep_range(10000, 12000);
+ usleep_range(1000, 2000);
+ gpiod_set_value(boe->enable_gpio, 0);
+ usleep_range(1000, 2000);
+ gpiod_set_value(boe->enable_gpio, 1);
+ usleep_range(6000, 10000);
ret = boe_panel_init(boe);
if (ret < 0) {
@@ -527,6 +551,8 @@ static int boe_panel_enable(struct drm_panel *panel)
if (boe->enabled)
return 0;
+ msleep(70);
+
ret = backlight_enable(boe->backlight);
if (ret) {
dev_err(panel->dev, "Failed to enable backlight %d\n",
@@ -564,6 +590,35 @@ static const struct panel_desc boe_tv101wum_nl6_desc = {
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = boe_init_cmd,
+ .discharge_on_disable = false,
+};
+
+static const struct drm_display_mode auo_kd101n80_45na_default_mode = {
+ .clock = 157000,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 80,
+ .hsync_end = 1200 + 80 + 24,
+ .htotal = 1200 + 80 + 24 + 36,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 16,
+ .vsync_end = 1920 + 16 + 4,
+ .vtotal = 1920 + 16 + 4 + 16,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc auo_kd101n80_45na_desc = {
+ .modes = &auo_kd101n80_45na_default_mode,
+ .bpc = 8,
+ .size = {
+ .width_mm = 135,
+ .height_mm = 216,
+ },
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM,
+ .init_cmds = auo_kd101n80_45na_init_cmd,
+ .discharge_on_disable = true,
};
static int boe_panel_get_modes(struct drm_panel *panel)
@@ -689,6 +744,9 @@ static const struct of_device_id boe_of_match[] = {
{ .compatible = "boe,tv101wum-nl6",
.data = &boe_tv101wum_nl6_desc
},
+ { .compatible = "auo,kd101n80-45na",
+ .data = &auo_kd101n80_45na_desc
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, boe_of_match);
--
2.21.0
Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.
Signed-off-by: Jitao Shi <[email protected]>
---
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 78 +++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index c757035ac09c..40dcb61ef423 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -382,6 +382,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
{},
};
+static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = {
+ _INIT_DELAY_CMD(24),
+ _INIT_DCS_CMD(0xB0, 0x01),
+ _INIT_DCS_CMD(0xC0, 0x48),
+ _INIT_DCS_CMD(0xC1, 0x48),
+ _INIT_DCS_CMD(0xC2, 0x47),
+ _INIT_DCS_CMD(0xC3, 0x47),
+ _INIT_DCS_CMD(0xC4, 0x46),
+ _INIT_DCS_CMD(0xC5, 0x46),
+ _INIT_DCS_CMD(0xC6, 0x45),
+ _INIT_DCS_CMD(0xC7, 0x45),
+ _INIT_DCS_CMD(0xC8, 0x64),
+ _INIT_DCS_CMD(0xC9, 0x64),
+ _INIT_DCS_CMD(0xCA, 0x4F),
+ _INIT_DCS_CMD(0xCB, 0x4F),
+ _INIT_DCS_CMD(0xCC, 0x40),
+ _INIT_DCS_CMD(0xCD, 0x40),
+ _INIT_DCS_CMD(0xCE, 0x66),
+ _INIT_DCS_CMD(0xCF, 0x66),
+ _INIT_DCS_CMD(0xD0, 0x4F),
+ _INIT_DCS_CMD(0xD1, 0x4F),
+ _INIT_DCS_CMD(0xD2, 0x41),
+ _INIT_DCS_CMD(0xD3, 0x41),
+ _INIT_DCS_CMD(0xD4, 0x48),
+ _INIT_DCS_CMD(0xD5, 0x48),
+ _INIT_DCS_CMD(0xD6, 0x47),
+ _INIT_DCS_CMD(0xD7, 0x47),
+ _INIT_DCS_CMD(0xD8, 0x46),
+ _INIT_DCS_CMD(0xD9, 0x46),
+ _INIT_DCS_CMD(0xDA, 0x45),
+ _INIT_DCS_CMD(0xDB, 0x45),
+ _INIT_DCS_CMD(0xDC, 0x64),
+ _INIT_DCS_CMD(0xDD, 0x64),
+ _INIT_DCS_CMD(0xDE, 0x4F),
+ _INIT_DCS_CMD(0xDF, 0x4F),
+ _INIT_DCS_CMD(0xE0, 0x40),
+ _INIT_DCS_CMD(0xE1, 0x40),
+ _INIT_DCS_CMD(0xE2, 0x66),
+ _INIT_DCS_CMD(0xE3, 0x66),
+ _INIT_DCS_CMD(0xE4, 0x4F),
+ _INIT_DCS_CMD(0xE5, 0x4F),
+ _INIT_DCS_CMD(0xE6, 0x41),
+ _INIT_DCS_CMD(0xE7, 0x41),
+ _INIT_DELAY_CMD(150),
+ {},
+};
+
static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
{
return container_of(panel, struct boe_panel, base);
@@ -649,6 +696,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = {
.init_cmds = boe_init_cmd,
};
+static const struct drm_display_mode auo_b101uan08_3_default_mode = {
+ .clock = 159667,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 60,
+ .hsync_end = 1200 + 60 + 4,
+ .htotal = 1200 + 60 + 4 + 80,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 34,
+ .vsync_end = 1920 + 34 + 2,
+ .vtotal = 1920 + 34 + 2 + 24,
+ .vrefresh = 60,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc auo_b101uan08_3_desc = {
+ .modes = &auo_b101uan08_3_default_mode,
+ .bpc = 8,
+ .size = {
+ .width_mm = 135,
+ .height_mm = 216,
+ },
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM,
+ .init_cmds = auo_b101uan08_3_init_cmd,
+};
+
static int boe_panel_get_modes(struct drm_panel *panel)
{
struct boe_panel *boe = to_boe_panel(panel);
@@ -778,6 +853,9 @@ static const struct of_device_id boe_of_match[] = {
{ .compatible = "boe,tv101wum-n53",
.data = &boe_tv101wum_n53_desc
},
+ { .compatible = "auo,b101uan08.3",
+ .data = &auo_b101uan08_3_desc
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, boe_of_match);
--
2.21.0