Hi,
From D32 every component have a line size register to indicate internal
fifo size, instead of using the global line_sz.
This serie aims at adding the layer line size support and check
accordingly on both D71 and D32 or newer.
Depends on:
https://patchwork.freedesktop.org/series/62377/
https://patchwork.freedesktop.org/series/62181/
Changes since v1:
Rebases to drm-misc-next branch.
Lowry Li (Arm Technology China) (2):
drm/komeda: Add line size support
drm/komeda: Adds layer horizontal input size limitation check for D71
.../arm/display/komeda/d71/d71_component.c | 106 ++++++++++++++++--
.../gpu/drm/arm/display/komeda/d71/d71_regs.h | 9 +-
.../drm/arm/display/komeda/komeda_pipeline.h | 2 +
.../display/komeda/komeda_pipeline_state.c | 17 +++
4 files changed, 119 insertions(+), 15 deletions(-)
--
2.17.1
From: "Lowry Li (Arm Technology China)" <[email protected]>
On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.
So this patch is to set line size support and do the line size
check.
Signed-off-by: Lowry Li (Arm Technology China) <[email protected]>
---
.../arm/display/komeda/d71/d71_component.c | 57 ++++++++++++++++---
.../gpu/drm/arm/display/komeda/d71/d71_regs.h | 9 +--
.../drm/arm/display/komeda/komeda_pipeline.h | 2 +
.../display/komeda/komeda_pipeline_state.c | 17 ++++++
4 files changed, 70 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 7b374a3b911e..357837b9d6ed 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -106,6 +106,23 @@ static void dump_block_header(struct seq_file *sf, void __iomem *reg)
i, hdr.output_ids[i]);
}
+/* On D71, we are using the global line size. From D32, every component have
+ * a line size register to indicate the fifo size.
+ */
+static u32 __get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg,
+ u32 max_default)
+{
+ if (!d71->periph_addr)
+ max_default = malidp_read32(reg, BLK_MAX_LINE_SIZE);
+
+ return max_default;
+}
+
+static u32 get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg)
+{
+ return __get_blk_line_size(d71, reg, d71->max_line_size);
+}
+
static u32 to_rot_ctrl(u32 rot)
{
u32 lr_ctrl = 0;
@@ -365,7 +382,28 @@ static int d71_layer_init(struct d71_dev *d71,
else
layer->layer_type = KOMEDA_FMT_SIMPLE_LAYER;
- set_range(&layer->hsize_in, 4, d71->max_line_size);
+ if (!d71->periph_addr) {
+ /* D32 or newer product */
+ layer->line_sz = malidp_read32(reg, BLK_MAX_LINE_SIZE);
+ layer->yuv_line_sz = L_INFO_YUV_MAX_LINESZ(layer_info);
+ } else if (d71->max_line_size > 2048) {
+ /* D71 4K */
+ layer->line_sz = d71->max_line_size;
+ layer->yuv_line_sz = layer->line_sz / 2;
+ } else {
+ /* D71 2K */
+ if (layer->layer_type == KOMEDA_FMT_RICH_LAYER) {
+ /* rich layer is 4K configuration */
+ layer->line_sz = d71->max_line_size * 2;
+ layer->yuv_line_sz = layer->line_sz / 2;
+ } else {
+ layer->line_sz = d71->max_line_size;
+ layer->yuv_line_sz = 0;
+ }
+ }
+
+ set_range(&layer->hsize_in, 4, layer->line_sz);
+
set_range(&layer->vsize_in, 4, d71->max_vsize);
malidp_write32(reg, LAYER_PALPHA, D71_PALPHA_DEF_MAP);
@@ -456,9 +494,11 @@ static int d71_wb_layer_init(struct d71_dev *d71,
wb_layer = to_layer(c);
wb_layer->layer_type = KOMEDA_FMT_WB_LAYER;
+ wb_layer->line_sz = get_blk_line_size(d71, reg);
+ wb_layer->yuv_line_sz = wb_layer->line_sz;
- set_range(&wb_layer->hsize_in, D71_MIN_LINE_SIZE, d71->max_line_size);
- set_range(&wb_layer->vsize_in, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
+ set_range(&wb_layer->hsize_in, 64, wb_layer->line_sz);
+ set_range(&wb_layer->vsize_in, 64, d71->max_vsize);
return 0;
}
@@ -595,8 +635,8 @@ static int d71_compiz_init(struct d71_dev *d71,
compiz = to_compiz(c);
- set_range(&compiz->hsize, D71_MIN_LINE_SIZE, d71->max_line_size);
- set_range(&compiz->vsize, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
+ set_range(&compiz->hsize, 64, get_blk_line_size(d71, reg));
+ set_range(&compiz->vsize, 64, d71->max_vsize);
return 0;
}
@@ -753,7 +793,7 @@ static int d71_scaler_init(struct d71_dev *d71,
}
scaler = to_scaler(c);
- set_range(&scaler->hsize, 4, 2048);
+ set_range(&scaler->hsize, 4, __get_blk_line_size(d71, reg, 2048));
set_range(&scaler->vsize, 4, 4096);
scaler->max_downscaling = 6;
scaler->max_upscaling = 64;
@@ -862,7 +902,7 @@ static int d71_splitter_init(struct d71_dev *d71,
splitter = to_splitter(c);
- set_range(&splitter->hsize, 4, d71->max_line_size);
+ set_range(&splitter->hsize, 4, get_blk_line_size(d71, reg));
set_range(&splitter->vsize, 4, d71->max_vsize);
return 0;
@@ -933,7 +973,8 @@ static int d71_merger_init(struct d71_dev *d71,
merger = to_merger(c);
- set_range(&merger->hsize_merged, 4, 4032);
+ set_range(&merger->hsize_merged, 4,
+ __get_blk_line_size(d71, reg, 4032));
set_range(&merger->vsize_merged, 4, 4096);
return 0;
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
index 2d5e6d00b42c..1727dc993909 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
@@ -10,6 +10,7 @@
/* Common block registers offset */
#define BLK_BLOCK_INFO 0x000
#define BLK_PIPELINE_INFO 0x004
+#define BLK_MAX_LINE_SIZE 0x008
#define BLK_VALID_INPUT_ID0 0x020
#define BLK_OUTPUT_ID0 0x060
#define BLK_INPUT_ID0 0x080
@@ -321,6 +322,7 @@
#define L_INFO_RF BIT(0)
#define L_INFO_CM BIT(1)
#define L_INFO_ABUF_SIZE(x) (((x) >> 4) & 0x7)
+#define L_INFO_YUV_MAX_LINESZ(x) (((x) >> 16) & 0xFFFF)
/* Scaler registers */
#define SC_COEFFTAB 0x0DC
@@ -494,13 +496,6 @@ enum d71_blk_type {
#define D71_DEFAULT_PREPRETCH_LINE 5
#define D71_BUS_WIDTH_16_BYTES 16
-#define D71_MIN_LINE_SIZE 64
-#define D71_MIN_VERTICAL_SIZE 64
-#define D71_SC_MIN_LIN_SIZE 4
-#define D71_SC_MIN_VERTICAL_SIZE 4
-#define D71_SC_MAX_LIN_SIZE 2048
-#define D71_SC_MAX_VERTICAL_SIZE 4096
-
#define D71_SC_MAX_UPSCALING 64
#define D71_SC_MAX_DOWNSCALING 6
#define D71_SC_SPLIT_OVERLAP 8
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
index 910d279ae48d..92aba58ce2a5 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
@@ -227,6 +227,8 @@ struct komeda_layer {
/* accepted h/v input range before rotation */
struct malidp_range hsize_in, vsize_in;
u32 layer_type; /* RICH, SIMPLE or WB */
+ u32 line_sz;
+ u32 yuv_line_sz; /* maximum line size for YUV422 and YUV420 */
u32 supported_rots;
/* komeda supports layer split which splits a whole image to two parts
* left and right and handle them by two individual layer processors
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
index 5526731f5a33..6df442666cfe 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
@@ -285,6 +285,7 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
struct komeda_data_flow_cfg *dflow)
{
u32 src_x, src_y, src_w, src_h;
+ u32 line_sz, max_line_sz;
if (!komeda_fb_is_layer_supported(kfb, layer->layer_type, dflow->rot))
return -EINVAL;
@@ -314,6 +315,22 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
return -EINVAL;
}
+ if (drm_rotation_90_or_270(dflow->rot))
+ line_sz = dflow->in_h;
+ else
+ line_sz = dflow->in_w;
+
+ if (kfb->base.format->hsub > 1)
+ max_line_sz = layer->yuv_line_sz;
+ else
+ max_line_sz = layer->line_sz;
+
+ if (line_sz > max_line_sz) {
+ DRM_DEBUG_ATOMIC("Required line_sz: %d exceeds the max size %d\n",
+ line_sz, max_line_sz);
+ return -EINVAL;
+ }
+
return 0;
}
--
2.17.1
From: "Lowry Li (Arm Technology China)" <[email protected]>
Adds maximum line size check according to the AFBC decoder limitation
and special Line size limitation(2046) for format: YUV420_10BIT and X0L2.
Signed-off-by: Lowry Li (Arm Technology China) <[email protected]>
---
.../arm/display/komeda/d71/d71_component.c | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 357837b9d6ed..6740b8422f11 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -349,7 +349,56 @@ static void d71_layer_dump(struct komeda_component *c, struct seq_file *sf)
seq_printf(sf, "%sAD_V_CROP:\t\t0x%X\n", prefix, v[2]);
}
+static int d71_layer_validate(struct komeda_component *c,
+ struct komeda_component_state *state)
+{
+ struct komeda_layer_state *st = to_layer_st(state);
+ struct komeda_layer *layer = to_layer(c);
+ struct drm_plane_state *plane_st;
+ struct drm_framebuffer *fb;
+ u32 fourcc, line_sz, max_line_sz;
+
+ plane_st = drm_atomic_get_new_plane_state(state->obj.state,
+ state->plane);
+ fb = plane_st->fb;
+ fourcc = fb->format->format;
+
+ if (drm_rotation_90_or_270(st->rot))
+ line_sz = st->vsize - st->afbc_crop_t - st->afbc_crop_b;
+ else
+ line_sz = st->hsize - st->afbc_crop_l - st->afbc_crop_r;
+
+ if (fb->modifier) {
+ if ((fb->modifier & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) ==
+ AFBC_FORMAT_MOD_BLOCK_SIZE_32x8)
+ max_line_sz = layer->line_sz;
+ else
+ max_line_sz = layer->line_sz / 2;
+
+ if (line_sz > max_line_sz) {
+ DRM_DEBUG_ATOMIC("afbc request line_sz: %d exceed the max afbc line_sz: %d.\n",
+ line_sz, max_line_sz);
+ return -EINVAL;
+ }
+ }
+
+ if (fourcc == DRM_FORMAT_YUV420_10BIT && line_sz > 2046 && (st->afbc_crop_l % 4)) {
+ DRM_DEBUG_ATOMIC("YUV420_10BIT input_hsize: %d exceed the max size 2046.\n",
+ line_sz);
+ return -EINVAL;
+ }
+
+ if (fourcc == DRM_FORMAT_X0L2 && line_sz > 2046 && (st->addr[0] % 16)) {
+ DRM_DEBUG_ATOMIC("X0L2 input_hsize: %d exceed the max size 2046.\n",
+ line_sz);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct komeda_component_funcs d71_layer_funcs = {
+ .validate = d71_layer_validate,
.update = d71_layer_update,
.disable = d71_layer_disable,
.dump_register = d71_layer_dump,
--
2.17.1