2019-10-04 12:52:31

by Kai-Heng Feng

[permalink] [raw]
Subject: [PATCH] r8152: Set macpassthru in reset_resume callback

r8152 may fail to establish network connection after resume from system
suspend.

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.

Signed-off-by: Kai-Heng Feng <[email protected]>
---
drivers/net/usb/r8152.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 08726090570e..cee9fef925cd 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4799,10 +4799,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
struct r8152 *tp = usb_get_intfdata(intf);

clear_bit(SELECTIVE_SUSPEND, &tp->flags);
- mutex_lock(&tp->control);
tp->rtl_ops.init(tp);
queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
- mutex_unlock(&tp->control);
+ set_ethernet_addr(tp);
return rtl8152_resume(intf);
}

--
2.17.1


2019-10-05 00:32:08

by David Miller

[permalink] [raw]
Subject: Re: [PATCH] r8152: Set macpassthru in reset_resume callback

From: Kai-Heng Feng <[email protected]>
Date: Fri, 4 Oct 2019 20:51:04 +0800

> r8152 may fail to establish network connection after resume from system
> suspend.
>
> If the USB port connects to r8152 lost its power during system suspend,
> the MAC address was written before is lost. The reason is that The MAC
> address doesn't get written again in its reset_resume callback.
>
> So let's set MAC address again in reset_resume callback. Also remove
> unnecessary lock as no other locking attempt will happen during
> reset_resume.
>
> Signed-off-by: Kai-Heng Feng <[email protected]>

Applied.

2019-10-05 11:48:21

by Simon Horman

[permalink] [raw]
Subject: Re: [PATCH] r8152: Set macpassthru in reset_resume callback

On Fri, Oct 04, 2019 at 08:51:04PM +0800, Kai-Heng Feng wrote:
> r8152 may fail to establish network connection after resume from system
> suspend.
>
> If the USB port connects to r8152 lost its power during system suspend,
> the MAC address was written before is lost. The reason is that The MAC
> address doesn't get written again in its reset_resume callback.
>
> So let's set MAC address again in reset_resume callback. Also remove
> unnecessary lock as no other locking attempt will happen during
> reset_resume.

This is two separate seemingly unrelated, other than locality in the code,
changes. One is a fix, the other seems to be a cleanup. Perhaps they would
be better addressed in separate patches.

> Signed-off-by: Kai-Heng Feng <[email protected]>
> ---
> drivers/net/usb/r8152.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index 08726090570e..cee9fef925cd 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -4799,10 +4799,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
> struct r8152 *tp = usb_get_intfdata(intf);
>
> clear_bit(SELECTIVE_SUSPEND, &tp->flags);
> - mutex_lock(&tp->control);
> tp->rtl_ops.init(tp);
> queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
> - mutex_unlock(&tp->control);
> + set_ethernet_addr(tp);
> return rtl8152_resume(intf);
> }
>
> --
> 2.17.1
>

2019-10-05 11:58:43

by Kai-Heng Feng

[permalink] [raw]
Subject: Re: [PATCH] r8152: Set macpassthru in reset_resume callback



> On Oct 5, 2019, at 19:46, Simon Horman <[email protected]> wrote:
>
> On Fri, Oct 04, 2019 at 08:51:04PM +0800, Kai-Heng Feng wrote:
>> r8152 may fail to establish network connection after resume from system
>> suspend.
>>
>> If the USB port connects to r8152 lost its power during system suspend,
>> the MAC address was written before is lost. The reason is that The MAC
>> address doesn't get written again in its reset_resume callback.
>>
>> So let's set MAC address again in reset_resume callback. Also remove
>> unnecessary lock as no other locking attempt will happen during
>> reset_resume.
>
> This is two separate seemingly unrelated, other than locality in the code,
> changes. One is a fix, the other seems to be a cleanup. Perhaps they would
> be better addressed in separate patches.

rtl8152_set_mac_address() which gets called by set_ethernet_addr(), also holds the same mutex.
So this is more then a cleanup and I should mention it in commit log.

Kai-Heng

>
>> Signed-off-by: Kai-Heng Feng <[email protected]>
>> ---
>> drivers/net/usb/r8152.c | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
>> index 08726090570e..cee9fef925cd 100644
>> --- a/drivers/net/usb/r8152.c
>> +++ b/drivers/net/usb/r8152.c
>> @@ -4799,10 +4799,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
>> struct r8152 *tp = usb_get_intfdata(intf);
>>
>> clear_bit(SELECTIVE_SUSPEND, &tp->flags);
>> - mutex_lock(&tp->control);
>> tp->rtl_ops.init(tp);
>> queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
>> - mutex_unlock(&tp->control);
>> + set_ethernet_addr(tp);
>> return rtl8152_resume(intf);
>> }
>>
>> --
>> 2.17.1
>>

2019-10-05 12:18:01

by Simon Horman

[permalink] [raw]
Subject: Re: [PATCH] r8152: Set macpassthru in reset_resume callback

On Sat, Oct 05, 2019 at 07:54:15PM +0800, Kai-Heng Feng wrote:
>
>
> > On Oct 5, 2019, at 19:46, Simon Horman <[email protected]> wrote:
> >
> > On Fri, Oct 04, 2019 at 08:51:04PM +0800, Kai-Heng Feng wrote:
> >> r8152 may fail to establish network connection after resume from system
> >> suspend.
> >>
> >> If the USB port connects to r8152 lost its power during system suspend,
> >> the MAC address was written before is lost. The reason is that The MAC
> >> address doesn't get written again in its reset_resume callback.
> >>
> >> So let's set MAC address again in reset_resume callback. Also remove
> >> unnecessary lock as no other locking attempt will happen during
> >> reset_resume.
> >
> > This is two separate seemingly unrelated, other than locality in the code,
> > changes. One is a fix, the other seems to be a cleanup. Perhaps they would
> > be better addressed in separate patches.
>
> rtl8152_set_mac_address() which gets called by set_ethernet_addr(), also holds the same mutex.
> So this is more then a cleanup and I should mention it in commit log.

Thanks, I agree that is a good idea.

> Kai-Heng
>
> >
> >> Signed-off-by: Kai-Heng Feng <[email protected]>
> >> ---
> >> drivers/net/usb/r8152.c | 3 +--
> >> 1 file changed, 1 insertion(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> >> index 08726090570e..cee9fef925cd 100644
> >> --- a/drivers/net/usb/r8152.c
> >> +++ b/drivers/net/usb/r8152.c
> >> @@ -4799,10 +4799,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
> >> struct r8152 *tp = usb_get_intfdata(intf);
> >>
> >> clear_bit(SELECTIVE_SUSPEND, &tp->flags);
> >> - mutex_lock(&tp->control);
> >> tp->rtl_ops.init(tp);
> >> queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
> >> - mutex_unlock(&tp->control);
> >> + set_ethernet_addr(tp);
> >> return rtl8152_resume(intf);
> >> }
> >>
> >> --
> >> 2.17.1
> >>
>