This is the start of the stable review cycle for the 4.19.93 release.
There are 114 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.93-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.93-rc1
Hans de Goede <[email protected]>
pinctrl: baytrail: Really serialize all register accesses
David Engraf <[email protected]>
tty/serial: atmel: fix out of range clock divider handling
Christophe Leroy <[email protected]>
spi: fsl: don't map irq during probe
Taehee Yoo <[email protected]>
gtp: avoid zero size hashtable
Taehee Yoo <[email protected]>
gtp: fix an use-after-free in ipv4_pdp_find()
Taehee Yoo <[email protected]>
gtp: fix wrong condition in gtp_genl_dump_pdp()
Eric Dumazet <[email protected]>
tcp: do not send empty skb from tcp_write_xmit()
Eric Dumazet <[email protected]>
tcp/dccp: fix possible race __inet_lookup_established()
Russell King <[email protected]>
net: marvell: mvpp2: phylink requires the link interrupt
Taehee Yoo <[email protected]>
gtp: do not allow adding duplicate tid and ms_addr pdp context
Hangbin Liu <[email protected]>
net/dst: do not confirm neighbor for vxlan and geneve pmtu update
Hangbin Liu <[email protected]>
sit: do not confirm neighbor when do pmtu update
Hangbin Liu <[email protected]>
vti: do not confirm neighbor when do pmtu update
Hangbin Liu <[email protected]>
tunnel: do not confirm neighbor when do pmtu update
Hangbin Liu <[email protected]>
net/dst: add new function skb_dst_update_pmtu_no_confirm
Hangbin Liu <[email protected]>
gtp: do not confirm neighbor when do pmtu update
Hangbin Liu <[email protected]>
ip6_gre: do not confirm neighbor when do pmtu update
Hangbin Liu <[email protected]>
net: add bool confirm_neigh parameter for dst_ops.update_pmtu
Stefano Garzarella <[email protected]>
vhost/vsock: accept only packets with the right dst_cid
Antonio Messina <[email protected]>
udp: fix integer overflow while computing available space in sk_rcvbuf
Cambda Zhu <[email protected]>
tcp: Fix highest_sack and highest_sack_seq
Vladis Dronov <[email protected]>
ptp: fix the race between the release of ptp_clock and cdev
Martin Blumenstingl <[email protected]>
net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
Vladyslav Tarasiuk <[email protected]>
net/mlxfw: Fix out-of-memory error in mfa2 flash burning
Netanel Belgazal <[email protected]>
net: ena: fix napi handler misbehavior when the napi budget is zero
Eric Dumazet <[email protected]>
hrtimer: Annotate lockless access to timer->state
Eric Dumazet <[email protected]>
net: icmp: fix data-race in cmp_global_allow()
Eric Dumazet <[email protected]>
net: add a READ_ONCE() in skb_peek_tail()
Eric Dumazet <[email protected]>
inetpeer: fix data-race in inet_putpeer / inet_putpeer
Eric Dumazet <[email protected]>
netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()
Eric Dumazet <[email protected]>
6pack,mkiss: fix possible deadlock
Florian Westphal <[email protected]>
netfilter: ebtables: compat: reject all padding in matches/watchers
Logan Gunthorpe <[email protected]>
PCI/switchtec: Read all 64 bits of part_event_bitmap
Linus Torvalds <[email protected]>
filldir[64]: remove WARN_ON_ONCE() for bad directory entries
Linus Torvalds <[email protected]>
Make filldir[64]() verify the directory entry filename is valid
Mattias Jacobsson <[email protected]>
perf strbuf: Remove redundant va_end() in strbuf_addv()
Mahesh Bandewar <[email protected]>
bonding: fix active-backup transition after link failure
Takashi Iwai <[email protected]>
ALSA: hda - Downgrade error message for single-cmd fallback
Marco Oliverio <[email protected]>
netfilter: nf_queue: enqueue skbs with NULL dst
Alexander Lobakin <[email protected]>
net, sysctl: Fix compiler warning when only cBPF is present
Jan H. Schönherr <[email protected]>
x86/mce: Fix possibly incorrect severity calculation on AMD
Greg Kroah-Hartman <[email protected]>
Revert "powerpc/vcpu: Assume dedicated processors as non-preempt"
Mike Rapoport <[email protected]>
userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
Johannes Weiner <[email protected]>
kernel: sysctl: make drop_caches write-only
Daniel Baluta <[email protected]>
mailbox: imx: Fix Tx doorbell shutdown path
Ding Xiang <[email protected]>
ocfs2: fix passing zero to 'PTR_ERR' warning
Thomas Richter <[email protected]>
s390/cpum_sf: Check for SDBT and SDB consistency
Masahiro Yamada <[email protected]>
libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
Harald Freudenberger <[email protected]>
s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR
Arnaldo Carvalho de Melo <[email protected]>
perf regs: Make perf_reg_name() return "unknown" instead of NULL
Adrian Hunter <[email protected]>
perf script: Fix brstackinsn for AUXTRACE
Diego Elio Pettenò <[email protected]>
cdrom: respect device capabilities during opening action
Chengguang Xu <[email protected]>
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
Nathan Chancellor <[email protected]>
powerpc: Don't add -mabi= flags when building with Clang
Masahiro Yamada <[email protected]>
scripts/kallsyms: fix definitely-lost memory leak
Colin Ian King <[email protected]>
apparmor: fix unsigned len comparison with less than zero
Vladimir Oltean <[email protected]>
gpio: mpc8xxx: Don't overwrite default irq_set_type callback
Bart Van Assche <[email protected]>
scsi: target: iscsi: Wait for all commands to finish before freeing a session
Anatol Pomazau <[email protected]>
scsi: iscsi: Don't send data to unbound connection
Finn Thain <[email protected]>
scsi: NCR5380: Add disconnect_mask module parameter
Maurizio Lombardi <[email protected]>
scsi: scsi_debug: num_tgts must be >= 0
Subhash Jadavani <[email protected]>
scsi: ufs: Fix error handing during hibern8 enter
peter chang <[email protected]>
scsi: pm80xx: Fix for SATA device discovery
Kevin Hao <[email protected]>
watchdog: Fix the race between the release of watchdog_core_data and cdev
Andrew Duggan <[email protected]>
HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
Blaž Hrastnik <[email protected]>
HID: Improve Windows Precision Touchpad detection.
Qian Cai <[email protected]>
libnvdimm/btt: fix variable 'rc' set but not used
Doug Berger <[email protected]>
ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening
Hans de Goede <[email protected]>
HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
Jinke Fan <[email protected]>
HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
Coly Li <[email protected]>
bcache: at least try to shrink 1 node in bch_mca_scan()
Robert Jarzmik <[email protected]>
clk: pxa: fix one of the pxa RTC clocks
Finn Thain <[email protected]>
scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
Gustavo L. F. Walbon <[email protected]>
powerpc/security: Fix wrong message when RFI Flush is disable
Tyrel Datwyler <[email protected]>
PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-info
Tyrel Datwyler <[email protected]>
PCI: rpaphp: Annotate and correctly byte swap DRC properties
Tyrel Datwyler <[email protected]>
PCI: rpaphp: Don't rely on firmware feature to imply drc-info support
David Hildenbrand <[email protected]>
powerpc/pseries/cmm: Implement release() function for sysfs device
Bean Huo <[email protected]>
scsi: ufs: fix potential bug which ends in system hang
Tyrel Datwyler <[email protected]>
PCI: rpaphp: Fix up pointer to first drc-info entry
James Smart <[email protected]>
scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences
Konstantin Khlebnikov <[email protected]>
fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long
Lee Jones <[email protected]>
mfd: mfd-core: Honour Device Tree's request to disable a child-device
Paul Cercueil <[email protected]>
irqchip: ingenic: Error out if IRQ domain creation failed
Florian Fainelli <[email protected]>
irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary
Michael Hennerich <[email protected]>
clk: clk-gpio: propagate rate change to parent
Jeffrey Hugo <[email protected]>
clk: qcom: Allow constant ratio freq tables for rcg
Chao Yu <[email protected]>
f2fs: fix to update dir's i_pino during cross_rename
James Smart <[email protected]>
scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow
Bart Van Assche <[email protected]>
scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)
Jan Kara <[email protected]>
jbd2: Fix statistics for the number of logged blocks
Matthew Bobrowski <[email protected]>
ext4: iomap that extends beyond EOF should be marked dirty
Matthew Bobrowski <[email protected]>
ext4: update direct I/O read lock pattern for IOCB_NOWAIT
Aneesh Kumar K.V <[email protected]>
powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning
Anthony Steinhauser <[email protected]>
powerpc/security/book3s64: Report L1TF status in sysfs
Geert Uytterhoeven <[email protected]>
clocksource/drivers/timer-of: Use unique device name instead of timer
Chuhong Yuan <[email protected]>
clocksource/drivers/asm9260: Add a check for of_clk_get
Guido Günther <[email protected]>
leds: lm3692x: Handle failure to probe the regulator
Eric Dumazet <[email protected]>
dma-debug: add a schedule point in debug_dma_dump_mappings()
Michael Ellerman <[email protected]>
powerpc/tools: Don't quote $objdump in scripts
Aneesh Kumar K.V <[email protected]>
powerpc/pseries: Don't fail hash page table insert for bolted mapping
Michael Ellerman <[email protected]>
powerpc/pseries: Mark accumulate_stolen_time() as notrace
Xiang Chen <[email protected]>
scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()
Dan Carpenter <[email protected]>
scsi: csiostor: Don't enable IRQs too early
James Smart <[email protected]>
scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices
David Disseldorp <[email protected]>
scsi: target: compare full CHAP_A Algorithm strings
Nicholas Graumann <[email protected]>
dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset
Thierry Reding <[email protected]>
iommu/tegra-smmu: Fix page tables in > 4 GiB memory
Ezequiel Garcia <[email protected]>
iommu: rockchip: Free domain on .domain_free
Chao Yu <[email protected]>
f2fs: fix to update time in lazytime mode
Evan Green <[email protected]>
Input: atmel_mxt_ts - disable IRQ across suspend
James Smart <[email protected]>
scsi: lpfc: Fix locking on mailbox command completion
Sreekanth Reddy <[email protected]>
scsi: mpt3sas: Fix clear pending bit in ioctl status
James Smart <[email protected]>
scsi: lpfc: Fix discovery failures when target device connectivity bounces
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/compressed/libfdt_env.h | 4 +-
arch/arm/mm/proc-v7-bugs.c | 3 +
arch/powerpc/Makefile | 4 +
arch/powerpc/boot/libfdt_env.h | 2 +
arch/powerpc/include/asm/spinlock.h | 4 +-
arch/powerpc/kernel/security.c | 21 ++--
arch/powerpc/kernel/time.c | 2 +-
arch/powerpc/mm/hash_utils_64.c | 10 +-
arch/powerpc/platforms/pseries/cmm.c | 5 +
arch/powerpc/platforms/pseries/setup.c | 7 --
arch/powerpc/tools/relocs_check.sh | 2 +-
arch/powerpc/tools/unrel_branch_check.sh | 4 +-
arch/s390/kernel/perf_cpum_sf.c | 17 +++-
arch/x86/kernel/cpu/mcheck/mce.c | 2 +-
drivers/cdrom/cdrom.c | 12 ++-
drivers/clk/clk-gpio.c | 2 +-
drivers/clk/pxa/clk-pxa27x.c | 1 +
drivers/clk/qcom/clk-rcg2.c | 2 +
drivers/clk/qcom/common.c | 3 +
drivers/clocksource/asm9260_timer.c | 4 +
drivers/clocksource/timer-of.c | 2 +-
drivers/dma/xilinx/xilinx_dma.c | 1 +
drivers/gpio/gpio-mpc8xxx.c | 3 +-
drivers/hid/hid-core.c | 4 +
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-logitech-hidpp.c | 3 +
drivers/hid/hid-quirks.c | 1 +
drivers/hid/hid-rmi.c | 3 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 4 +
drivers/iommu/rockchip-iommu.c | 7 +-
drivers/iommu/tegra-smmu.c | 11 +-
drivers/irqchip/irq-bcm7038-l1.c | 4 +
drivers/irqchip/irq-ingenic.c | 15 ++-
drivers/leds/leds-lm3692x.c | 13 ++-
drivers/mailbox/imx-mailbox.c | 4 +-
drivers/md/bcache/btree.c | 2 +
drivers/mfd/mfd-core.c | 5 +
drivers/net/bonding/bond_main.c | 3 -
drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c | 7 +-
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 14 ++-
drivers/net/gtp.c | 111 ++++++++++++---------
drivers/net/hamradio/6pack.c | 4 +-
drivers/net/hamradio/mkiss.c | 4 +-
drivers/nvdimm/btt.c | 8 +-
drivers/pci/hotplug/rpaphp_core.c | 38 +++----
drivers/pci/switch/switchtec.c | 2 +-
drivers/pinctrl/intel/pinctrl-baytrail.c | 81 ++++++++-------
drivers/ptp/ptp_clock.c | 31 +++---
drivers/ptp/ptp_private.h | 2 +-
drivers/s390/crypto/zcrypt_error.h | 2 +
drivers/scsi/NCR5380.c | 6 +-
drivers/scsi/atari_scsi.c | 6 +-
drivers/scsi/csiostor/csio_lnode.c | 15 +--
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +-
drivers/scsi/iscsi_tcp.c | 8 ++
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 7 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +-
drivers/scsi/lpfc/lpfc_sli.c | 15 ++-
drivers/scsi/mac_scsi.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 2 +
drivers/scsi/scsi_debug.c | 5 +
drivers/scsi/scsi_trace.c | 11 +-
drivers/scsi/sun3_scsi.c | 4 +-
drivers/scsi/ufs/ufshcd.c | 21 ++--
drivers/spi/spi-fsl-spi.c | 5 +-
drivers/target/iscsi/iscsi_target.c | 10 +-
drivers/target/iscsi/iscsi_target_auth.c | 2 +-
drivers/tty/serial/atmel_serial.c | 43 ++++----
drivers/vhost/vsock.c | 4 +-
drivers/watchdog/watchdog_dev.c | 70 ++++++-------
fs/ext4/inode.c | 16 ++-
fs/f2fs/f2fs.h | 23 +++--
fs/f2fs/inode.c | 6 +-
fs/f2fs/namei.c | 15 ++-
fs/f2fs/super.c | 20 ++--
fs/jbd2/commit.c | 4 +-
fs/ocfs2/acl.c | 4 +-
fs/quota/dquot.c | 29 +++---
fs/readdir.c | 40 ++++++++
fs/userfaultfd.c | 18 ++--
include/linux/hrtimer.h | 14 ++-
include/linux/libfdt_env.h | 3 +
include/linux/posix-clock.h | 19 ++--
include/linux/quota.h | 2 +-
include/linux/rculist_nulls.h | 37 +++++++
include/linux/skbuff.h | 6 +-
include/net/dst.h | 13 ++-
include/net/dst_ops.h | 3 +-
include/net/inet_hashtables.h | 12 ++-
include/net/sock.h | 5 +
include/scsi/iscsi_proto.h | 1 +
kernel/dma/debug.c | 1 +
kernel/sysctl.c | 2 +-
kernel/time/hrtimer.c | 11 +-
kernel/time/posix-clock.c | 31 +++---
net/bridge/br_netfilter_hooks.c | 3 +
net/bridge/br_nf_core.c | 3 +-
net/bridge/netfilter/ebtables.c | 33 +++---
net/core/sysctl_net_core.c | 2 +
net/decnet/dn_route.c | 6 +-
net/ipv4/icmp.c | 11 +-
net/ipv4/inet_connection_sock.c | 2 +-
net/ipv4/inet_diag.c | 3 +-
net/ipv4/inet_hashtables.c | 19 ++--
net/ipv4/inetpeer.c | 12 ++-
net/ipv4/ip_tunnel.c | 2 +-
net/ipv4/ip_vti.c | 2 +-
net/ipv4/route.c | 9 +-
net/ipv4/tcp_ipv4.c | 7 +-
net/ipv4/tcp_output.c | 11 ++
net/ipv4/udp.c | 2 +-
net/ipv4/xfrm4_policy.c | 5 +-
net/ipv6/inet6_connection_sock.c | 2 +-
net/ipv6/inet6_hashtables.c | 3 +-
net/ipv6/ip6_gre.c | 2 +-
net/ipv6/ip6_tunnel.c | 4 +-
net/ipv6/ip6_vti.c | 2 +-
net/ipv6/route.c | 22 ++--
net/ipv6/sit.c | 2 +-
net/ipv6/xfrm6_policy.c | 5 +-
net/netfilter/ipvs/ip_vs_xmit.c | 2 +-
net/netfilter/nf_queue.c | 2 +-
net/sctp/transport.c | 2 +-
scripts/kallsyms.c | 2 +
security/apparmor/label.c | 12 ++-
sound/pci/hda/hda_controller.c | 2 +-
tools/perf/builtin-script.c | 2 +-
tools/perf/util/perf_regs.h | 2 +-
tools/perf/util/strbuf.c | 1 -
134 files changed, 856 insertions(+), 450 deletions(-)
From: Jeffrey Hugo <[email protected]>
[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ]
Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range. It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:
{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
{ }
So, lets support that.
We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad. Then, we need ignore the freq from the
table, and instead base everything on the requested freq.
Suggested-by: Stephen Boyd <[email protected]>
Signed-off-by: Jeffrey Hugo <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/clk-rcg2.c | 2 ++
drivers/clk/qcom/common.c | 3 +++
2 files changed, 5 insertions(+)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 52208d4165f4..51b2388d80ac 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -206,6 +206,8 @@ static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
if (clk_flags & CLK_SET_RATE_PARENT) {
rate = f->freq;
if (f->pre_div) {
+ if (!rate)
+ rate = req->rate;
rate /= 2;
rate *= f->pre_div + 1;
}
diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index db9b2471ac40..bfb6d6065a90 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -29,6 +29,9 @@ struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate)
if (!f)
return NULL;
+ if (!f->freq)
+ return f;
+
for (; f->freq; f++)
if (rate <= f->freq)
return f;
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ]
If the 'brcm,irq-can-wake' property is specified, make sure we also
enable the corresponding parent interrupt we are attached to.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-bcm7038-l1.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 0f6e30e9009d..f53dfc5aa7c5 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -284,6 +284,10 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
pr_err("failed to map parent interrupt %d\n", parent_irq);
return -EINVAL;
}
+
+ if (of_property_read_bool(dn, "brcm,irq-can-wake"))
+ enable_irq_wake(parent_irq);
+
irq_set_chained_handler_and_data(parent_irq, bcm7038_l1_irq_handle,
intc);
--
2.20.1
From: Konstantin Khlebnikov <[email protected]>
[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ]
Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.
Result may looks like:
fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689
Values bigger than 2^31-1 reported as negative.
All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.
Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.
Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/quota/dquot.c | 29 +++++++++++++++++------------
include/linux/quota.h | 2 +-
2 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 59b00d8db22c..154f175066b3 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2853,68 +2853,73 @@ EXPORT_SYMBOL(dquot_quotactl_sysfile_ops);
static int do_proc_dqstats(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- unsigned int type = (int *)table->data - dqstats.stat;
+ unsigned int type = (unsigned long *)table->data - dqstats.stat;
+ s64 value = percpu_counter_sum(&dqstats.counter[type]);
+
+ /* Filter negative values for non-monotonic counters */
+ if (value < 0 && (type == DQST_ALLOC_DQUOTS ||
+ type == DQST_FREE_DQUOTS))
+ value = 0;
/* Update global table */
- dqstats.stat[type] =
- percpu_counter_sum_positive(&dqstats.counter[type]);
- return proc_dointvec(table, write, buffer, lenp, ppos);
+ dqstats.stat[type] = value;
+ return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
}
static struct ctl_table fs_dqstats_table[] = {
{
.procname = "lookups",
.data = &dqstats.stat[DQST_LOOKUPS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "drops",
.data = &dqstats.stat[DQST_DROPS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "reads",
.data = &dqstats.stat[DQST_READS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "writes",
.data = &dqstats.stat[DQST_WRITES],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "cache_hits",
.data = &dqstats.stat[DQST_CACHE_HITS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "allocated_dquots",
.data = &dqstats.stat[DQST_ALLOC_DQUOTS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "free_dquots",
.data = &dqstats.stat[DQST_FREE_DQUOTS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
{
.procname = "syncs",
.data = &dqstats.stat[DQST_SYNCS],
- .maxlen = sizeof(int),
+ .maxlen = sizeof(unsigned long),
.mode = 0444,
.proc_handler = do_proc_dqstats,
},
diff --git a/include/linux/quota.h b/include/linux/quota.h
index f32dd270b8e3..27aab84fcbaa 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -263,7 +263,7 @@ enum {
};
struct dqstats {
- int stat[_DQST_DQSTAT_LAST];
+ unsigned long stat[_DQST_DQSTAT_LAST];
struct percpu_counter counter[_DQST_DQSTAT_LAST];
};
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ]
These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_lnode.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index cc5611efc7a9..a8e29e3d3572 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -301,6 +301,7 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
struct fc_fdmi_port_name *port_name;
uint8_t buf[64];
uint8_t *fc4_type;
+ unsigned long flags;
if (fdmi_req->wr_status != FW_SUCCESS) {
csio_ln_dbg(ln, "WR error:%x in processing fdmi rhba cmd\n",
@@ -385,13 +386,13 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
len = (uint32_t)(pld - (uint8_t *)cmd);
/* Submit FDMI RPA request */
- spin_lock_irq(&hw->lock);
+ spin_lock_irqsave(&hw->lock, flags);
if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_done,
FCOE_CT, &fdmi_req->dma_buf, len)) {
CSIO_INC_STATS(ln, n_fdmi_err);
csio_ln_dbg(ln, "Failed to issue fdmi rpa req\n");
}
- spin_unlock_irq(&hw->lock);
+ spin_unlock_irqrestore(&hw->lock, flags);
}
/*
@@ -412,6 +413,7 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
struct fc_fdmi_rpl *reg_pl;
struct fs_fdmi_attrs *attrib_blk;
uint8_t buf[64];
+ unsigned long flags;
if (fdmi_req->wr_status != FW_SUCCESS) {
csio_ln_dbg(ln, "WR error:%x in processing fdmi dprt cmd\n",
@@ -491,13 +493,13 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
attrib_blk->numattrs = htonl(numattrs);
/* Submit FDMI RHBA request */
- spin_lock_irq(&hw->lock);
+ spin_lock_irqsave(&hw->lock, flags);
if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_rhba_cbfn,
FCOE_CT, &fdmi_req->dma_buf, len)) {
CSIO_INC_STATS(ln, n_fdmi_err);
csio_ln_dbg(ln, "Failed to issue fdmi rhba req\n");
}
- spin_unlock_irq(&hw->lock);
+ spin_unlock_irqrestore(&hw->lock, flags);
}
/*
@@ -512,6 +514,7 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
void *cmd;
struct fc_fdmi_port_name *port_name;
uint32_t len;
+ unsigned long flags;
if (fdmi_req->wr_status != FW_SUCCESS) {
csio_ln_dbg(ln, "WR error:%x in processing fdmi dhba cmd\n",
@@ -542,13 +545,13 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
len += sizeof(*port_name);
/* Submit FDMI request */
- spin_lock_irq(&hw->lock);
+ spin_lock_irqsave(&hw->lock, flags);
if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dprt_cbfn,
FCOE_CT, &fdmi_req->dma_buf, len)) {
CSIO_INC_STATS(ln, n_fdmi_err);
csio_ln_dbg(ln, "Failed to issue fdmi dprt req\n");
}
- spin_unlock_irq(&hw->lock);
+ spin_unlock_irqrestore(&hw->lock, flags);
}
/**
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]
When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.
Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index bd8dc6a2243c..3dfed191252c 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -483,8 +483,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* single discovery thread, this will cause a huge delay in
* discovery. Also this will cause multiple state machines
* running in parallel for this node.
+ * This only applies to a fabric environment.
*/
- if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) {
+ if ((ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) &&
+ (vport->fc_flag & FC_FABRIC)) {
/* software abort outstanding PLOGI */
lpfc_els_abort(phba, ndlp);
}
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]
Coverity reported the following:
*** CID 101747: Null pointer dereferences (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433 kfree(mp);
4434 }
4435 mempool_free(mbox, phba->mbox_mem_pool);
4436 }
4437 out:
4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv CID 101747: Null pointer dereferences (FORWARD_NULL)
vvv Dereferencing null pointer "shost".
4439 spin_lock_irq(shost->host_lock);
4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441 spin_unlock_irq(shost->host_lock);
4442
4443 /* If the node is not being used by another discovery thread,
4444 * and we are sending a reject, we are done with it.
Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.
Reported-by: coverity-bot <[email protected]>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")
CC: James Bottomley <[email protected]>
CC: "Gustavo A. R. Silva" <[email protected]>
CC: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4f4d1b3b3bbc..7398350b08b4 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4110,7 +4110,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
mempool_free(mbox, phba->mbox_mem_pool);
}
out:
- if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp) && shost) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
spin_unlock_irq(shost->host_lock);
--
2.20.1
From: Tyrel Datwyler <[email protected]>
[ Upstream commit 9723c25f99aff0451cfe6392e1b9fdd99d0bf9f0 ]
The first entry of the ibm,drc-info property is an int encoded count
of the number of drc-info entries that follow. The "value" pointer
returned by of_prop_next_u32() is still pointing at the this value
when we call of_read_drc_info_cell(), but the helper function
expects that value to be pointing at the first element of an entry.
Fix up by incrementing the "value" pointer to point at the first
element of the first drc-info entry prior.
Signed-off-by: Tyrel Datwyler <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/hotplug/rpaphp_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index cc860c5f7d26..f56004243591 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -239,6 +239,8 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
value = of_prop_next_u32(info, NULL, &entries);
if (!value)
return -EINVAL;
+ else
+ value++;
for (j = 0; j < entries; j++) {
of_read_drc_info_cell(&info, &value, &drc);
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 4411464d6f8b5e5759637235a6f2b2a85c2be0f1 ]
If a hardware-specific driver does not provide a name, the timer-of core
falls back to device_node.name. Due to generic DT node naming policies,
that name is almost always "timer", and thus doesn't identify the actual
timer used.
Fix this by using device_node.full_name instead, which includes the unit
addrees.
Example impact on /proc/timer_list:
-Clock Event Device: timer
+Clock Event Device: timer@fcfec400
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/timer-of.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index 06ed88a2a8a0..6e2cb3693ed8 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -199,7 +199,7 @@ int __init timer_of_init(struct device_node *np, struct timer_of *to)
}
if (!to->clkevt.name)
- to->clkevt.name = np->name;
+ to->clkevt.name = np->full_name;
to->np = np;
--
2.20.1
From: David Hildenbrand <[email protected]>
[ Upstream commit 7d8212747435c534c8d564fbef4541a463c976ff ]
When unloading the module, one gets
------------[ cut here ]------------
Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
...
We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/cmm.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 25427a48feae..502ebcc6c3cb 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -425,6 +425,10 @@ static struct bus_type cmm_subsys = {
.dev_name = "cmm",
};
+static void cmm_release_device(struct device *dev)
+{
+}
+
/**
* cmm_sysfs_register - Register with sysfs
*
@@ -440,6 +444,7 @@ static int cmm_sysfs_register(struct device *dev)
dev->id = 0;
dev->bus = &cmm_subsys;
+ dev->release = cmm_release_device;
if ((rc = device_register(dev)))
goto subsys_unregister;
--
2.20.1
From: Tyrel Datwyler <[email protected]>
[ Upstream commit 52e2b0f16574afd082cff0f0e8567b2d9f68c033 ]
In the event that the partition is migrated to a platform with older
firmware that doesn't support the ibm,drc-info property the device
tree is modified to remove the ibm,drc-info property and replace it
with the older style ibm,drc-* properties for types, names, indexes,
and power-domains. One of the requirements of the drc-info firmware
feature is that the client is able to handle both the new property,
and old style properties at runtime. Therefore we can't rely on the
firmware feature alone to dictate which property is currently
present in the device tree.
Fix this short coming by checking explicitly for the ibm,drc-info
property, and falling back to the older ibm,drc-* properties if it
doesn't exist.
Signed-off-by: Tyrel Datwyler <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/hotplug/rpaphp_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index f56004243591..ccc6deeb9ccf 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -275,7 +275,7 @@ int rpaphp_check_drc_props(struct device_node *dn, char *drc_name,
return -EINVAL;
}
- if (firmware_has_feature(FW_FEATURE_DRC_INFO))
+ if (of_find_property(dn->parent, "ibm,drc-info", NULL))
return rpaphp_check_drc_props_v2(dn, drc_name, drc_type,
*my_index);
else
--
2.20.1
From: Tyrel Datwyler <[email protected]>
[ Upstream commit 0737686778c6dbe0908d684dd5b9c05b127526ba ]
The device tree is in big endian format and any properties directly
retrieved using OF helpers that don't explicitly byte swap should
be annotated. In particular there are several places where we grab
the opaque property value for the old ibm,drc-* properties and the
ibm,my-drc-index property.
Fix this for better static checking by annotating values we know to
explicitly big endian, and byte swap where appropriate.
Signed-off-by: Tyrel Datwyler <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/hotplug/rpaphp_core.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index ccc6deeb9ccf..7d74fe875225 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -154,11 +154,11 @@ static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
return speed;
}
-static int get_children_props(struct device_node *dn, const int **drc_indexes,
- const int **drc_names, const int **drc_types,
- const int **drc_power_domains)
+static int get_children_props(struct device_node *dn, const __be32 **drc_indexes,
+ const __be32 **drc_names, const __be32 **drc_types,
+ const __be32 **drc_power_domains)
{
- const int *indexes, *names, *types, *domains;
+ const __be32 *indexes, *names, *types, *domains;
indexes = of_get_property(dn, "ibm,drc-indexes", NULL);
names = of_get_property(dn, "ibm,drc-names", NULL);
@@ -194,8 +194,8 @@ static int rpaphp_check_drc_props_v1(struct device_node *dn, char *drc_name,
char *drc_type, unsigned int my_index)
{
char *name_tmp, *type_tmp;
- const int *indexes, *names;
- const int *types, *domains;
+ const __be32 *indexes, *names;
+ const __be32 *types, *domains;
int i, rc;
rc = get_children_props(dn->parent, &indexes, &names, &types, &domains);
@@ -208,7 +208,7 @@ static int rpaphp_check_drc_props_v1(struct device_node *dn, char *drc_name,
/* Iterate through parent properties, looking for my-drc-index */
for (i = 0; i < be32_to_cpu(indexes[0]); i++) {
- if ((unsigned int) indexes[i + 1] == my_index)
+ if (be32_to_cpu(indexes[i + 1]) == my_index)
break;
name_tmp += (strlen(name_tmp) + 1);
@@ -267,7 +267,7 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
int rpaphp_check_drc_props(struct device_node *dn, char *drc_name,
char *drc_type)
{
- const unsigned int *my_index;
+ const __be32 *my_index;
my_index = of_get_property(dn, "ibm,my-drc-index", NULL);
if (!my_index) {
@@ -277,10 +277,10 @@ int rpaphp_check_drc_props(struct device_node *dn, char *drc_name,
if (of_find_property(dn->parent, "ibm,drc-info", NULL))
return rpaphp_check_drc_props_v2(dn, drc_name, drc_type,
- *my_index);
+ be32_to_cpu(*my_index));
else
return rpaphp_check_drc_props_v1(dn, drc_name, drc_type,
- *my_index);
+ be32_to_cpu(*my_index));
}
EXPORT_SYMBOL_GPL(rpaphp_check_drc_props);
@@ -311,10 +311,11 @@ static int is_php_type(char *drc_type)
* for built-in pci slots (even when the built-in slots are
* dlparable.)
*/
-static int is_php_dn(struct device_node *dn, const int **indexes,
- const int **names, const int **types, const int **power_domains)
+static int is_php_dn(struct device_node *dn, const __be32 **indexes,
+ const __be32 **names, const __be32 **types,
+ const __be32 **power_domains)
{
- const int *drc_types;
+ const __be32 *drc_types;
int rc;
rc = get_children_props(dn, indexes, names, &drc_types, power_domains);
@@ -349,7 +350,7 @@ int rpaphp_add_slot(struct device_node *dn)
struct slot *slot;
int retval = 0;
int i;
- const int *indexes, *names, *types, *power_domains;
+ const __be32 *indexes, *names, *types, *power_domains;
char *name, *type;
if (!dn->name || strcmp(dn->name, "pci"))
--
2.20.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 9ff6aa027dbb98755f0265695354f2dd07c0d1ce ]
debug_dma_dump_mappings() can take a lot of cpu cycles :
lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump
real 0m0.463s
user 0m0.003s
sys 0m0.459s
Let's add a cond_resched() to avoid holding cpu for too long.
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Corentin Labbe <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/debug.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index c007d25bee09..3a2397444076 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -442,6 +442,7 @@ void debug_dma_dump_mappings(struct device *dev)
}
spin_unlock_irqrestore(&bucket->lock, flags);
+ cond_resched();
}
}
--
2.20.1
From: Gustavo L. F. Walbon <[email protected]>
[ Upstream commit 4e706af3cd8e1d0503c25332b30cad33c97ed442 ]
The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.
If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.
"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.
SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.
So the message should be as the truth table shows:
CPU | L1D private | RFI Flush | sysfs
----|-------------|-----------|-------------------------------------
P9 | False | False | Vulnerable
P9 | False | True | Mitigation: RFI Flush
P9 | True | False | Vulnerable: L1D private per thread
P9 | True | True | Mitigation: RFI Flush, L1D private per thread
P8 | False | False | Vulnerable
P8 | False | True | Mitigation: RFI Flush
Output before this fix:
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: RFI Flush, L1D private per thread
# echo 0 > /sys/kernel/debug/powerpc/rfi_flush
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: L1D private per thread
Output after fix:
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Mitigation: RFI Flush, L1D private per thread
# echo 0 > /sys/kernel/debug/powerpc/rfi_flush
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Vulnerable: L1D private per thread
Signed-off-by: Gustavo L. F. Walbon <[email protected]>
Signed-off-by: Mauro S. M. Rodrigues <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/security.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index a4354c4f6bc5..6a3dde9587cc 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -134,26 +134,22 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
- if (rfi_flush || thread_priv) {
+ if (rfi_flush) {
struct seq_buf s;
seq_buf_init(&s, buf, PAGE_SIZE - 1);
- seq_buf_printf(&s, "Mitigation: ");
-
- if (rfi_flush)
- seq_buf_printf(&s, "RFI Flush");
-
- if (rfi_flush && thread_priv)
- seq_buf_printf(&s, ", ");
-
+ seq_buf_printf(&s, "Mitigation: RFI Flush");
if (thread_priv)
- seq_buf_printf(&s, "L1D private per thread");
+ seq_buf_printf(&s, ", L1D private per thread");
seq_buf_printf(&s, "\n");
return s.len;
}
+ if (thread_priv)
+ return sprintf(buf, "Vulnerable: L1D private per thread\n");
+
if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
return sprintf(buf, "Not affected\n");
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit 79172ab20bfd8437b277254028efdb68484e2c21 ]
Since the scsi subsystem adopted the blk-mq API, a host with zero
sg_tablesize crashes with a NULL pointer dereference.
blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004 SP: (ptrval) a2: 00874520
d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000
d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0
Process kworker/u2:2 (pid: 15, task=(ptrval))
Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 0000007a 00000000
push data: 00000000 00000000 00000000 00000000
Stack from 0087bd98:
00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14
[<0024d200>] __scsi_execute+0x124/0x174
[<0024d0dc>] __scsi_execute+0x0/0x174
[<00265d10>] sd_revalidate_disk+0xba/0x1f02
[<00265c56>] sd_revalidate_disk+0x0/0x1f02
[<0036ddf4>] strlen+0x0/0x22
[<00227ba0>] device_add+0x3da/0x604
[<0036ddf4>] strlen+0x0/0x22
[<00267e64>] sd_probe+0x30c/0x4b4
[<0002da44>] process_one_work+0x0/0x402
[<0022b978>] really_probe+0x226/0x354
[<0022bc34>] driver_probe_device+0xa4/0xf0
[<0002da44>] process_one_work+0x0/0x402
[<0022bcd0>] __driver_attach_async_helper+0x50/0x70
[<00035dae>] async_run_entry_fn+0x36/0x130
[<0002db88>] process_one_work+0x144/0x402
[<0002e1aa>] worker_thread+0x0/0x570
[<0002e29a>] worker_thread+0xf0/0x570
[<0002e1aa>] worker_thread+0x0/0x570
[<003768d8>] schedule+0x0/0xb8
[<0003f58c>] __init_waitqueue_head+0x0/0x12
[<00033e92>] kthread+0xc2/0xf6
[<000331e8>] kthread_parkme+0x0/0x4e
[<003768d8>] schedule+0x0/0xb8
[<00033dd0>] kthread+0x0/0xf6
[<00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c
Disabling lock debugging due to kernel taint
Avoid this by setting sg_tablesize = 1.
Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au
Reported-and-tested-by: Michael Schmitz <[email protected]>
Reviewed-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/atari_scsi.c | 6 +++---
drivers/scsi/mac_scsi.c | 2 +-
drivers/scsi/sun3_scsi.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 89f5154c40b6..764c46d7333e 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -742,7 +742,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
atari_scsi_template.sg_tablesize = SG_ALL;
} else {
atari_scsi_template.can_queue = 1;
- atari_scsi_template.sg_tablesize = SG_NONE;
+ atari_scsi_template.sg_tablesize = 1;
}
if (setup_can_queue > 0)
@@ -751,8 +751,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
if (setup_cmd_per_lun > 0)
atari_scsi_template.cmd_per_lun = setup_cmd_per_lun;
- /* Leave sg_tablesize at 0 on a Falcon! */
- if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize >= 0)
+ /* Don't increase sg_tablesize on Falcon! */
+ if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize > 0)
atari_scsi_template.sg_tablesize = setup_sg_tablesize;
if (setup_hostid >= 0) {
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 643321fc152d..b5050c2ede00 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -429,7 +429,7 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
mac_scsi_template.can_queue = setup_can_queue;
if (setup_cmd_per_lun > 0)
mac_scsi_template.cmd_per_lun = setup_cmd_per_lun;
- if (setup_sg_tablesize >= 0)
+ if (setup_sg_tablesize > 0)
mac_scsi_template.sg_tablesize = setup_sg_tablesize;
if (setup_hostid >= 0)
mac_scsi_template.this_id = setup_hostid & 7;
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 9492638296c8..af8a7ef9c858 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -498,7 +498,7 @@ static struct scsi_host_template sun3_scsi_template = {
.eh_host_reset_handler = sun3scsi_host_reset,
.can_queue = 16,
.this_id = 7,
- .sg_tablesize = SG_NONE,
+ .sg_tablesize = 1,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
@@ -520,7 +520,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
sun3_scsi_template.can_queue = setup_can_queue;
if (setup_cmd_per_lun > 0)
sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
- if (setup_sg_tablesize >= 0)
+ if (setup_sg_tablesize > 0)
sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
if (setup_hostid >= 0)
sun3_scsi_template.this_id = setup_hostid & 7;
--
2.20.1
From: Anthony Steinhauser <[email protected]>
[ Upstream commit 8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]
Some PowerPC CPUs are vulnerable to L1TF to the same extent as to
Meltdown. It is also mitigated by flushing the L1D on privilege
transition.
Currently the sysfs gives a false negative on L1TF on CPUs that I
verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV
T2P9D01.
Signed-off-by: Anthony Steinhauser <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/security.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index a5c5940d970a..a4354c4f6bc5 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -160,6 +160,11 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
return sprintf(buf, "Vulnerable\n");
}
+
+ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return cpu_show_meltdown(dev, attr, buf);
+}
#endif
ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
--
2.20.1
From: Chuhong Yuan <[email protected]>
[ Upstream commit 6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ]
asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.
Signed-off-by: Chuhong Yuan <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/asm9260_timer.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
index 38cd2feb87c4..0ce760776406 100644
--- a/drivers/clocksource/asm9260_timer.c
+++ b/drivers/clocksource/asm9260_timer.c
@@ -198,6 +198,10 @@ static int __init asm9260_timer_init(struct device_node *np)
}
clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get clk!\n");
+ return PTR_ERR(clk);
+ }
ret = clk_prepare_enable(clk);
if (ret) {
--
2.20.1
From: Paul Cercueil <[email protected]>
[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ]
If we cannot create the IRQ domain, the driver should fail to probe
instead of succeeding with just a warning message.
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-ingenic.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/irqchip/irq-ingenic.c b/drivers/irqchip/irq-ingenic.c
index 2ff08986b536..be6923abf9a4 100644
--- a/drivers/irqchip/irq-ingenic.c
+++ b/drivers/irqchip/irq-ingenic.c
@@ -117,6 +117,14 @@ static int __init ingenic_intc_of_init(struct device_node *node,
goto out_unmap_irq;
}
+ domain = irq_domain_add_legacy(node, num_chips * 32,
+ JZ4740_IRQ_BASE, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!domain) {
+ err = -ENOMEM;
+ goto out_unmap_base;
+ }
+
for (i = 0; i < num_chips; i++) {
/* Mask all irqs */
writel(0xffffffff, intc->base + (i * CHIP_SIZE) +
@@ -143,14 +151,11 @@ static int __init ingenic_intc_of_init(struct device_node *node,
IRQ_NOPROBE | IRQ_LEVEL);
}
- domain = irq_domain_add_legacy(node, num_chips * 32, JZ4740_IRQ_BASE, 0,
- &irq_domain_simple_ops, NULL);
- if (!domain)
- pr_warn("unable to register IRQ domain\n");
-
setup_irq(parent_irq, &intc_cascade_action);
return 0;
+out_unmap_base:
+ iounmap(intc->base);
out_unmap_irq:
irq_dispose_mapping(parent_irq);
out_free:
--
2.20.1
From: Jan Kara <[email protected]>
[ Upstream commit 015c6033068208d6227612c878877919f3fcf6b6 ]
jbd2 statistics counting number of blocks logged in a transaction was
wrong. It didn't count the commit block and more importantly it didn't
count revoke descriptor blocks. Make sure these get properly counted.
Reviewed-by: Theodore Ts'o <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jbd2/commit.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 24f86ffe11d7..020bd7a0d8e0 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -724,7 +724,6 @@ start_journal_io:
submit_bh(REQ_OP_WRITE, REQ_SYNC, bh);
}
cond_resched();
- stats.run.rs_blocks_logged += bufs;
/* Force a new descriptor to be generated next
time round the loop. */
@@ -811,6 +810,7 @@ start_journal_io:
if (unlikely(!buffer_uptodate(bh)))
err = -EIO;
jbd2_unfile_log_bh(bh);
+ stats.run.rs_blocks_logged++;
/*
* The list contains temporary buffer heads created by
@@ -856,6 +856,7 @@ start_journal_io:
BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile");
clear_buffer_jwrite(bh);
jbd2_unfile_log_bh(bh);
+ stats.run.rs_blocks_logged++;
__brelse(bh); /* One for getblk */
/* AKPM: bforget here */
}
@@ -877,6 +878,7 @@ start_journal_io:
}
if (cbh)
err = journal_wait_on_commit_record(journal, cbh);
+ stats.run.rs_blocks_logged++;
if (jbd2_has_feature_async_commit(journal) &&
journal->j_flags & JBD2_BARRIER) {
blkdev_issue_flush(journal->j_dev, GFP_NOFS, NULL);
--
2.20.1
From: Lee Jones <[email protected]>
[ Upstream commit 6b5c350648b857047b47acf74a57087ad27d6183 ]
Until now, MFD has assumed all child devices passed to it (via
mfd_cells) are to be registered. It does not take into account
requests from Device Tree and the like to disable child devices
on a per-platform basis.
Well now it does.
Link: https://www.spinics.net/lists/arm-kernel/msg366309.html
Link: https://lkml.org/lkml/2019/8/22/1350
Reported-by: Barry Song <[email protected]>
Reported-by: Stephan Gerhold <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Tested-by: Stephan Gerhold <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/mfd-core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 182973df1aed..99a9c5c56ea9 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -178,6 +178,11 @@ static int mfd_add_device(struct device *parent, int id,
if (parent->of_node && cell->of_compatible) {
for_each_child_of_node(parent->of_node, np) {
if (of_device_is_compatible(np, cell->of_compatible)) {
+ if (!of_device_is_available(np)) {
+ /* Ignore disabled devices error free */
+ ret = 0;
+ goto fail_alias;
+ }
pdev->dev.of_node = np;
pdev->dev.fwnode = &np->fwnode;
break;
--
2.20.1
From: Bart Van Assche <[email protected]>
[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]
The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247
CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
dump_stack+0x8a/0xd6
print_address_description.constprop.0+0x40/0x60
__kasan_report.cold+0x1b/0x33
kasan_report+0x16/0x20
__asan_load8+0x58/0x90
__lock_acquire+0xb1a/0x2710
lock_acquire+0xd3/0x200
_raw_spin_lock_irqsave+0x43/0x60
target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
target_put_sess_cmd+0x2e/0x40 [target_core_mod]
lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
target_complete_ok_work+0x1b0/0x790 [target_core_mod]
process_one_work+0x549/0xa40
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Allocated by task 889:
save_stack+0x23/0x90
__kasan_kmalloc.constprop.0+0xcf/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0xf6/0x360
transport_alloc_session+0x29/0x80 [target_core_mod]
iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Freed by task 1025:
save_stack+0x23/0x90
__kasan_slab_free+0x13a/0x190
kasan_slab_free+0x12/0x20
kmem_cache_free+0x146/0x400
transport_free_session+0x179/0x2f0 [target_core_mod]
transport_deregister_session+0x130/0x180 [target_core_mod]
iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
The buggy address belongs to the object at ffff8881154ec9c0
which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
Cc: Mike Christie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 10 ++++++++--
include/scsi/iscsi_proto.h | 1 +
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 03e9cb156df9..317d0f3f7a14 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1157,7 +1157,9 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
hdr->cmdsn, be32_to_cpu(hdr->data_length), payload_length,
conn->cid);
- target_get_sess_cmd(&cmd->se_cmd, true);
+ if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+ return iscsit_add_reject_cmd(cmd,
+ ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
cmd->sense_reason = transport_lookup_cmd_lun(&cmd->se_cmd,
scsilun_to_int(&hdr->lun));
@@ -1998,7 +2000,9 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
conn->sess->se_sess, 0, DMA_NONE,
TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
- target_get_sess_cmd(&cmd->se_cmd, true);
+ if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+ return iscsit_add_reject_cmd(cmd,
+ ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
/*
* TASK_REASSIGN for ERL=2 / connection stays inside of
@@ -4204,6 +4208,8 @@ int iscsit_close_connection(
* must wait until they have completed.
*/
iscsit_check_conn_usage_count(conn);
+ target_sess_cmd_list_set_waiting(sess->se_sess);
+ target_wait_for_sess_cmds(sess->se_sess);
ahash_request_free(conn->conn_tx_hash);
if (conn->conn_rx_hash) {
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index df156f1d50b2..f0a01a54bd15 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -638,6 +638,7 @@ struct iscsi_reject {
#define ISCSI_REASON_BOOKMARK_INVALID 9
#define ISCSI_REASON_BOOKMARK_NO_RESOURCES 10
#define ISCSI_REASON_NEGOTIATION_RESET 11
+#define ISCSI_REASON_WAITING_FOR_LOGOUT 12
/* Max. number of Key=Value pairs in a text message */
#define MAX_KEY_VALUE_PAIRS 8192
--
2.20.1
From: Bean Huo <[email protected]>
[ Upstream commit cfcbae3895b86c390ede57b2a8f601dd5972b47b ]
In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:
Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
ESR = 0x96000047
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000047
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
Internal error: Oops: 96000047 [#2] PREEMPT SMP
...
Call trace:
__memcpy+0x74/0x180
ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
ufs_bsg_request+0x178/0x3b0
bsg_queue_rq+0xc0/0x118
blk_mq_dispatch_rq_list+0xb0/0x538
blk_mq_sched_dispatch_requests+0x18c/0x1d8
__blk_mq_run_hw_queue+0xb4/0x118
blk_mq_run_work_fn+0x28/0x38
process_one_work+0x1ec/0x470
worker_thread+0x48/0x458
kthread+0x130/0x138
ret_from_fork+0x10/0x1c
Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
---[ end trace 793e1eb5dff69f2d ]---
note: kworker/0:2H[2054] exited with preempt_count 1
This patch is to move "descriptor = NULL" down to below the label
"out_unlock".
Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Alim Akhtar <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Bean Huo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 8bce755e0f5b..7510d8328d4d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3011,10 +3011,10 @@ static int __ufshcd_query_descriptor(struct ufs_hba *hba,
goto out_unlock;
}
- hba->dev_cmd.query.descriptor = NULL;
*buf_len = be16_to_cpu(response->upiu_res.length);
out_unlock:
+ hba->dev_cmd.query.descriptor = NULL;
mutex_unlock(&hba->dev_cmd.lock);
out:
ufshcd_release(hba);
--
2.20.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]
The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.
The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:
- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio
On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).
Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Michael Walle <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-mpc8xxx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index c8673a5d9412..3f10f9599f2c 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -348,7 +348,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
* It's assumed that only a single type of gpio controller is available
* on the current machine, so overwriting global data is fine.
*/
- mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
+ if (devtype->irq_set_type)
+ mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
if (devtype->gpio_dir_out)
gc->direction_output = devtype->gpio_dir_out;
--
2.20.1
From: Arnaldo Carvalho de Melo <[email protected]>
[ Upstream commit 5b596e0ff0e1852197d4c82d3314db5e43126bf7 ]
To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.
Detected in a container mipsel debian cross build environment, where it
shows up as:
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
Also on mips64:
In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_user__printf' at util/session.c:1139:3,
inlined from 'dump_sample' at util/session.c:1246:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_intr__printf' at util/session.c:1147:3,
inlined from 'dump_sample' at util/session.c:1249:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909
Fixes: 2bcd355b71da ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/perf_regs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/perf_regs.h b/tools/perf/util/perf_regs.h
index c9319f8d17a6..f732e3af2bd4 100644
--- a/tools/perf/util/perf_regs.h
+++ b/tools/perf/util/perf_regs.h
@@ -34,7 +34,7 @@ int perf_reg_value(u64 *valp, struct regs_dump *regs, int id);
static inline const char *perf_reg_name(int id __maybe_unused)
{
- return NULL;
+ return "unknown";
}
static inline int perf_reg_value(u64 *valp __maybe_unused,
--
2.20.1
From: Adrian Hunter <[email protected]>
[ Upstream commit 0cd032d3b5fcebf5454315400ab310746a81ca53 ]
brstackinsn must be allowed to be set by the user when AUX area data has
been captured because, in that case, the branch stack might be
synthesized on the fly. This fixes the following error:
Before:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
Display of branch stack assembler requested, but non all-branch filter set
Hint: run 'perf record -b ...'
After:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep)
bmexec+2485:
00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED
00005641d5806bd0 movzxb (%r13,%rdx,1), %eax
00005641d5806bd6 add %rdi, %rax
00005641d5806bd9 movzxb -0x1(%rax), %edx
00005641d5806bdd cmp %rax, %r14
00005641d5806be0 jnb 0x5641d58069c0 # MISPRED
mismatch of LBR data and executable
00005641d58069c0 movzxb (%r13,%rdx,1), %edi
Fixes: 48d02a1d5c13 ("perf script: Add 'brstackinsn' for branch stacks")
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/builtin-script.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index a4c78499c838..1200973c77cb 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -428,7 +428,7 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
"selected. Hence, no address to lookup the source line number.\n");
return -EINVAL;
}
- if (PRINT_FIELD(BRSTACKINSN) &&
+ if (PRINT_FIELD(BRSTACKINSN) && !allow_user_set &&
!(perf_evlist__combined_branch_type(session->evlist) &
PERF_SAMPLE_BRANCH_ANY)) {
pr_err("Display of branch stack assembler requested, but non all-branch filter set\n"
--
2.20.1
From: Daniel Baluta <[email protected]>
[ Upstream commit bf159d151a0b844be28882f39e316b5800acaa2b ]
Tx doorbell is handled by txdb_tasklet and doesn't
have an associated IRQ.
Anyhow, imx_mu_shutdown ignores this and tries to
free an IRQ that wasn't requested for Tx DB resulting
in the following warning:
[ 1.967644] Trying to free already-free IRQ 26
[ 1.972108] WARNING: CPU: 2 PID: 157 at kernel/irq/manage.c:1708 __free_irq+0xc0/0x358
[ 1.980024] Modules linked in:
[ 1.983088] CPU: 2 PID: 157 Comm: kworker/2:1 Tainted: G
[ 1.993524] Hardware name: Freescale i.MX8QXP MEK (DT)
[ 1.998668] Workqueue: events deferred_probe_work_func
[ 2.003812] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 2.008607] pc : __free_irq+0xc0/0x358
[ 2.012364] lr : __free_irq+0xc0/0x358
[ 2.016111] sp : ffff00001179b7e0
[ 2.019422] x29: ffff00001179b7e0 x28: 0000000000000018
[ 2.024736] x27: ffff000011233000 x26: 0000000000000004
[ 2.030053] x25: 000000000000001a x24: ffff80083bec74d4
[ 2.035369] x23: 0000000000000000 x22: ffff80083bec7588
[ 2.040686] x21: ffff80083b1fe8d8 x20: ffff80083bec7400
[ 2.046003] x19: 0000000000000000 x18: ffffffffffffffff
[ 2.051320] x17: 0000000000000000 x16: 0000000000000000
[ 2.056637] x15: ffff0000111296c8 x14: ffff00009179b517
[ 2.061953] x13: ffff00001179b525 x12: ffff000011142000
[ 2.067270] x11: ffff000011129f20 x10: ffff0000105da970
[ 2.072587] x9 : 00000000ffffffd0 x8 : 0000000000000194
[ 2.077903] x7 : 612065657266206f x6 : ffff0000111e7b09
[ 2.083220] x5 : 0000000000000003 x4 : 0000000000000000
[ 2.088537] x3 : 0000000000000000 x2 : 00000000ffffffff
[ 2.093854] x1 : 28b70f0a2b60a500 x0 : 0000000000000000
[ 2.099173] Call trace:
[ 2.101618] __free_irq+0xc0/0x358
[ 2.105021] free_irq+0x38/0x98
[ 2.108170] imx_mu_shutdown+0x90/0xb0
[ 2.111921] mbox_free_channel.part.2+0x24/0xb8
[ 2.116453] mbox_free_channel+0x18/0x28
This bug is present from the beginning of times.
Cc: Oleksij Rempel <[email protected]>
Signed-off-by: Daniel Baluta <[email protected]>
Signed-off-by: Richard Zhu <[email protected]>
Reviewed-by: Dong Aisheng <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/imx-mailbox.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
index 363d35d5e49d..2f47023cab2b 100644
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -214,8 +214,10 @@ static void imx_mu_shutdown(struct mbox_chan *chan)
struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
struct imx_mu_con_priv *cp = chan->con_priv;
- if (cp->type == IMX_MU_TYPE_TXDB)
+ if (cp->type == IMX_MU_TYPE_TXDB) {
tasklet_kill(&cp->txdb_tasklet);
+ return;
+ }
imx_mu_xcr_rmw(priv, 0,
IMX_MU_xCR_TIEn(cp->idx) | IMX_MU_xCR_RIEn(cp->idx));
--
2.20.1
From: Aneesh Kumar K.V <[email protected]>
[ Upstream commit 16f6b67cf03cb43db7104acb2ca877bdc2606c92 ]
With large memory (8TB and more) hotplug, we can get soft lockup
warnings as below. These were caused by a long loop without any
explicit cond_resched which is a problem for !PREEMPT kernels.
Avoid this using cond_resched() while inserting hash page table
entries. We already do similar cond_resched() in __add_pages(), see
commit f64ac5e6e306 ("mm, memory_hotplug: add scheduling point to
__add_pages").
rcu: 3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001
(t=24003 jiffies g=4285 q=2002)
NMI backtrace for cpu 3
CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
nmi_cpu_backtrace+0x124/0x130
nmi_trigger_cpumask_backtrace+0x1ac/0x1f0
arch_trigger_cpumask_backtrace+0x28/0x3c
rcu_dump_cpu_stacks+0xf8/0x154
rcu_sched_clock_irq+0x878/0xb40
update_process_times+0x48/0x90
tick_sched_handle.isra.16+0x4c/0x80
tick_sched_timer+0x68/0xe0
__hrtimer_run_queues+0x180/0x430
hrtimer_interrupt+0x110/0x300
timer_interrupt+0x108/0x2f0
decrementer_common+0x114/0x120
--- interrupt: 901 at arch_add_memory+0xc0/0x130
LR = arch_add_memory+0x74/0x130
memremap_pages+0x494/0x650
devm_memremap_pages+0x3c/0xa0
pmem_attach_disk+0x188/0x750
nvdimm_bus_probe+0xac/0x2c0
really_probe+0x148/0x570
driver_probe_device+0x19c/0x1d0
device_driver_attach+0xcc/0x100
bind_store+0x134/0x1c0
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1a0/0x270
__vfs_write+0x3c/0x70
vfs_write+0xd0/0x260
ksys_write+0xdc/0x130
system_call+0x5c/0x68
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/hash_utils_64.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 11b41383e167..8894c8f300ea 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -307,6 +307,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
if (ret < 0)
break;
+ cond_resched();
#ifdef CONFIG_DEBUG_PAGEALLOC
if (debug_pagealloc_enabled() &&
(paddr >> PAGE_SHIFT) < linear_map_hash_count)
--
2.20.1
From: Kevin Hao <[email protected]>
[ Upstream commit 72139dfa2464e43957d330266994740bb7be2535 ]
The struct cdev is embedded in the struct watchdog_core_data. In the
current code, we manage the watchdog_core_data with a kref, but the
cdev is manged by a kobject. There is no any relationship between
this kref and kobject. So it is possible that the watchdog_core_data is
freed before the cdev is entirely released. We can easily get the
following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and
CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0
Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 00400009 (nzcv daif +PAN -UAO)
pc : debug_print_object+0xb0/0xf0
lr : debug_print_object+0xb0/0xf0
sp : ffff80001cbcfc70
x29: ffff80001cbcfc70 x28: ffff800010ea2128
x27: ffff800010bad000 x26: 0000000000000000
x25: ffff80001103c640 x24: ffff80001107b268
x23: ffff800010bad9e8 x22: ffff800010ea2128
x21: ffff000bc2c62af8 x20: ffff80001103c600
x19: ffff800010e867d8 x18: 0000000000000060
x17: 0000000000000000 x16: 0000000000000000
x15: ffff000bd7240470 x14: 6e6968207473696c
x13: 5f72656d6974203a x12: 6570797420746365
x11: 6a626f2029302065 x10: 7461747320657669
x9 : 7463612820657669 x8 : 3378302f3078302b
x7 : 0000000000001d7a x6 : ffff800010fd5889
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff000bff948548
x1 : 276a1c9e1edc2300 x0 : 0000000000000000
Call trace:
debug_print_object+0xb0/0xf0
debug_check_no_obj_freed+0x1e8/0x210
kfree+0x1b8/0x368
watchdog_cdev_unregister+0x88/0xc8
watchdog_dev_unregister+0x38/0x48
watchdog_unregister_device+0xa8/0x100
softdog_exit+0x18/0xfec4 [softdog]
__arm64_sys_delete_module+0x174/0x200
el0_svc_handler+0xd0/0x1c8
el0_svc+0x8/0xc
This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the
watchdog_core_data, and use the API provided by the commit 233ed09d7fda
to make sure that the release of watchdog_core_data and cdev are
in sequence.
Signed-off-by: Kevin Hao <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/watchdog_dev.c | 70 +++++++++++++++------------------
1 file changed, 32 insertions(+), 38 deletions(-)
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index f6c24b22b37c..4b89333e8eb4 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -38,7 +38,6 @@
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/hrtimer.h> /* For hrtimers */
#include <linux/kernel.h> /* For printk/panic/... */
-#include <linux/kref.h> /* For data references */
#include <linux/kthread.h> /* For kthread_work */
#include <linux/miscdevice.h> /* For handling misc devices */
#include <linux/module.h> /* For module stuff/... */
@@ -56,14 +55,14 @@
/*
* struct watchdog_core_data - watchdog core internal data
- * @kref: Reference count.
+ * @dev: The watchdog's internal device
* @cdev: The watchdog's Character device.
* @wdd: Pointer to watchdog device.
* @lock: Lock for watchdog core.
* @status: Watchdog core internal status bits.
*/
struct watchdog_core_data {
- struct kref kref;
+ struct device dev;
struct cdev cdev;
struct watchdog_device *wdd;
struct mutex lock;
@@ -822,7 +821,7 @@ static int watchdog_open(struct inode *inode, struct file *file)
file->private_data = wd_data;
if (!hw_running)
- kref_get(&wd_data->kref);
+ get_device(&wd_data->dev);
/* dev/watchdog is a virtual (and thus non-seekable) filesystem */
return nonseekable_open(inode, file);
@@ -834,11 +833,11 @@ out_clear:
return err;
}
-static void watchdog_core_data_release(struct kref *kref)
+static void watchdog_core_data_release(struct device *dev)
{
struct watchdog_core_data *wd_data;
- wd_data = container_of(kref, struct watchdog_core_data, kref);
+ wd_data = container_of(dev, struct watchdog_core_data, dev);
kfree(wd_data);
}
@@ -898,7 +897,7 @@ done:
*/
if (!running) {
module_put(wd_data->cdev.owner);
- kref_put(&wd_data->kref, watchdog_core_data_release);
+ put_device(&wd_data->dev);
}
return 0;
}
@@ -917,17 +916,22 @@ static struct miscdevice watchdog_miscdev = {
.fops = &watchdog_fops,
};
+static struct class watchdog_class = {
+ .name = "watchdog",
+ .owner = THIS_MODULE,
+ .dev_groups = wdt_groups,
+};
+
/*
* watchdog_cdev_register: register watchdog character device
* @wdd: watchdog device
- * @devno: character device number
*
* Register a watchdog character device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
-static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
+static int watchdog_cdev_register(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data;
int err;
@@ -935,7 +939,6 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
if (!wd_data)
return -ENOMEM;
- kref_init(&wd_data->kref);
mutex_init(&wd_data->lock);
wd_data->wdd = wdd;
@@ -964,23 +967,33 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
}
}
+ device_initialize(&wd_data->dev);
+ wd_data->dev.devt = MKDEV(MAJOR(watchdog_devt), wdd->id);
+ wd_data->dev.class = &watchdog_class;
+ wd_data->dev.parent = wdd->parent;
+ wd_data->dev.groups = wdd->groups;
+ wd_data->dev.release = watchdog_core_data_release;
+ dev_set_drvdata(&wd_data->dev, wdd);
+ dev_set_name(&wd_data->dev, "watchdog%d", wdd->id);
+
/* Fill in the data structures */
cdev_init(&wd_data->cdev, &watchdog_fops);
- wd_data->cdev.owner = wdd->ops->owner;
/* Add the device */
- err = cdev_add(&wd_data->cdev, devno, 1);
+ err = cdev_device_add(&wd_data->cdev, &wd_data->dev);
if (err) {
pr_err("watchdog%d unable to add device %d:%d\n",
wdd->id, MAJOR(watchdog_devt), wdd->id);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
old_wd_data = NULL;
- kref_put(&wd_data->kref, watchdog_core_data_release);
+ put_device(&wd_data->dev);
}
return err;
}
+ wd_data->cdev.owner = wdd->ops->owner;
+
/* Record time of most recent heartbeat as 'just before now'. */
wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1);
@@ -990,7 +1003,7 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
*/
if (watchdog_hw_running(wdd)) {
__module_get(wdd->ops->owner);
- kref_get(&wd_data->kref);
+ get_device(&wd_data->dev);
if (handle_boot_enabled)
hrtimer_start(&wd_data->timer, 0, HRTIMER_MODE_REL);
else
@@ -1013,7 +1026,7 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
- cdev_del(&wd_data->cdev);
+ cdev_device_del(&wd_data->cdev, &wd_data->dev);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
old_wd_data = NULL;
@@ -1032,15 +1045,9 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
hrtimer_cancel(&wd_data->timer);
kthread_cancel_work_sync(&wd_data->work);
- kref_put(&wd_data->kref, watchdog_core_data_release);
+ put_device(&wd_data->dev);
}
-static struct class watchdog_class = {
- .name = "watchdog",
- .owner = THIS_MODULE,
- .dev_groups = wdt_groups,
-};
-
static int watchdog_reboot_notifier(struct notifier_block *nb,
unsigned long code, void *data)
{
@@ -1071,27 +1078,14 @@ static int watchdog_reboot_notifier(struct notifier_block *nb,
int watchdog_dev_register(struct watchdog_device *wdd)
{
- struct device *dev;
- dev_t devno;
int ret;
- devno = MKDEV(MAJOR(watchdog_devt), wdd->id);
-
- ret = watchdog_cdev_register(wdd, devno);
+ ret = watchdog_cdev_register(wdd);
if (ret)
return ret;
- dev = device_create_with_groups(&watchdog_class, wdd->parent,
- devno, wdd, wdd->groups,
- "watchdog%d", wdd->id);
- if (IS_ERR(dev)) {
- watchdog_cdev_unregister(wdd);
- return PTR_ERR(dev);
- }
-
ret = watchdog_register_pretimeout(wdd);
if (ret) {
- device_destroy(&watchdog_class, devno);
watchdog_cdev_unregister(wdd);
return ret;
}
@@ -1099,7 +1093,8 @@ int watchdog_dev_register(struct watchdog_device *wdd)
if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
- ret = devm_register_reboot_notifier(dev, &wdd->reboot_nb);
+ ret = devm_register_reboot_notifier(&wdd->wd_data->dev,
+ &wdd->reboot_nb);
if (ret) {
pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
wdd->id, ret);
@@ -1121,7 +1116,6 @@ int watchdog_dev_register(struct watchdog_device *wdd)
void watchdog_dev_unregister(struct watchdog_device *wdd)
{
watchdog_unregister_pretimeout(wdd);
- device_destroy(&watchdog_class, wdd->wd_data->cdev.dev);
watchdog_cdev_unregister(wdd);
}
--
2.20.1
From: peter chang <[email protected]>
[ Upstream commit ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]
Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jack Wang <[email protected]>
Signed-off-by: peter chang <[email protected]>
Signed-off-by: Deepak Ukey <[email protected]>
Signed-off-by: Viswas G <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 5021aed87f33..8627feb80261 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2382,6 +2382,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("task 0x%p done with io_status 0x%x"
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, status, ts->resp, ts->stat));
+ if (t->slow_task)
+ complete(&t->slow_task->completion);
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
} else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 7cfd5639d99bec0d27af089d0c8c114330e43a72 ]
If the driver receives a login that is later then LOGO'd by the remote port
(aka ndlp), the driver, upon the completion of the LOGO ACC transmission,
will logout the node and unregister the rpi that is being used for the
node. As part of the unreg, the node's rpi value is replaced by the
LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the
offline walks the nodes and ensures they are logged out, which possibly
entails unreg'ing their rpi values. This path does not validate the node's
rpi value, thus doesn't detect that it has been unreg'd already. The
replaced rpi value is then used when accessing the rpi bitmask array which
tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid
index for the bitmask, it may fault the system.
Revise the rpi release code to detect when the rpi value is the replaced
RPI_ALLOC_ERROR value and ignore further release steps.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index bd555f886d27..a801917d3c19 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -17867,6 +17867,13 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
static void
__lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
{
+ /*
+ * if the rpi value indicates a prior unreg has already
+ * been done, skip the unreg.
+ */
+ if (rpi == LPFC_RPI_ALLOC_ERROR)
+ return;
+
if (test_and_clear_bit(rpi, phba->sli4_hba.rpi_bmask)) {
phba->sli4_hba.rpi_count--;
phba->sli4_hba.max_cfg_param.rpi_used--;
--
2.20.1
From: Bart Van Assche <[email protected]>
[ Upstream commit f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]
According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.
Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_trace.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 0ff083bbf5b1..617a60737590 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -30,15 +30,18 @@ static const char *
scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len)
{
const char *ret = trace_seq_buffer_ptr(p);
- sector_t lba = 0, txlen = 0;
+ u32 lba = 0, txlen;
lba |= ((cdb[1] & 0x1F) << 16);
lba |= (cdb[2] << 8);
lba |= cdb[3];
- txlen = cdb[4];
+ /*
+ * From SBC-2: a TRANSFER LENGTH field set to zero specifies that 256
+ * logical blocks shall be read (READ(6)) or written (WRITE(6)).
+ */
+ txlen = cdb[4] ? cdb[4] : 256;
- trace_seq_printf(p, "lba=%llu txlen=%llu",
- (unsigned long long)lba, (unsigned long long)txlen);
+ trace_seq_printf(p, "lba=%u txlen=%u", lba, txlen);
trace_seq_putc(p, 0);
return ret;
--
2.20.1
From: Chengguang Xu <[email protected]>
[ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
Setting softlimit larger than hardlimit seems meaningless
for disk quota but currently it is allowed. In this case,
there may be a bit of comfusion for users when they run
df comamnd to directory which has project quota.
For example, we set 20M softlimit and 10M hardlimit of
block usage limit for project quota of test_dir(project id 123).
[root@hades f2fs]# repquota -P -a
*** Report for project quotas on device /dev/nvme0n1p8
Block grace time: 7days; Inode grace time: 7days
Block limits File limits
Project used soft hard grace used soft hard grace
----------------------------------------------------------------------
0 -- 4 0 0 1 0 0
123 +- 10248 20480 10240 2 0 0
The result of df command as below:
[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 20M 11M 10M 51% /mnt/f2fs
Even though it looks like there is another 10M free space to use,
if we write new data to diretory test(inherit project id),
the write will fail with errno(-EDQUOT).
After this patch, the df result looks like below.
[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 10M 10M 0 100% /mnt/f2fs
Signed-off-by: Chengguang Xu <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/super.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 7a9cc64f5ca3..662c7de58b99 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
return PTR_ERR(dquot);
spin_lock(&dquot->dq_dqb_lock);
- limit = (dquot->dq_dqb.dqb_bsoftlimit ?
- dquot->dq_dqb.dqb_bsoftlimit :
- dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
+ limit = 0;
+ if (dquot->dq_dqb.dqb_bsoftlimit)
+ limit = dquot->dq_dqb.dqb_bsoftlimit;
+ if (dquot->dq_dqb.dqb_bhardlimit &&
+ (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
+ limit = dquot->dq_dqb.dqb_bhardlimit;
+
if (limit && buf->f_blocks > limit) {
curblock = dquot->dq_dqb.dqb_curspace >> sb->s_blocksize_bits;
buf->f_blocks = limit;
@@ -1159,9 +1163,13 @@ static int f2fs_statfs_project(struct super_block *sb,
(buf->f_blocks - curblock) : 0;
}
- limit = dquot->dq_dqb.dqb_isoftlimit ?
- dquot->dq_dqb.dqb_isoftlimit :
- dquot->dq_dqb.dqb_ihardlimit;
+ limit = 0;
+ if (dquot->dq_dqb.dqb_isoftlimit)
+ limit = dquot->dq_dqb.dqb_isoftlimit;
+ if (dquot->dq_dqb.dqb_ihardlimit &&
+ (!limit || dquot->dq_dqb.dqb_ihardlimit < limit))
+ limit = dquot->dq_dqb.dqb_ihardlimit;
+
if (limit && buf->f_files > limit) {
buf->f_files = limit;
buf->f_ffree =
--
2.20.1
From: Guido Günther <[email protected]>
[ Upstream commit 396128d2ffcba6e1954cfdc9a89293ff79cbfd7c ]
Instead use devm_regulator_get_optional since the regulator
is optional and check for errors.
Signed-off-by: Guido Günther <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Reviewed-by: Dan Murphy <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/leds/leds-lm3692x.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 4f413a7c5f05..d79a66a73169 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -337,9 +337,18 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
return ret;
}
- led->regulator = devm_regulator_get(&led->client->dev, "vled");
- if (IS_ERR(led->regulator))
+ led->regulator = devm_regulator_get_optional(&led->client->dev, "vled");
+ if (IS_ERR(led->regulator)) {
+ ret = PTR_ERR(led->regulator);
+ if (ret != -ENODEV) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&led->client->dev,
+ "Failed to get vled regulator: %d\n",
+ ret);
+ return ret;
+ }
led->regulator = NULL;
+ }
child = device_get_next_child_node(&led->client->dev, child);
if (!child) {
--
2.20.1
From: Maurizio Lombardi <[email protected]>
[ Upstream commit aa5334c4f3014940f11bf876e919c956abef4089 ]
Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maurizio Lombardi <[email protected]>
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_debug.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 65305b3848bc..a1dbae806fde 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -5351,6 +5351,11 @@ static int __init scsi_debug_init(void)
return -EINVAL;
}
+ if (sdebug_num_tgts < 0) {
+ pr_err("num_tgts must be >= 0\n");
+ return -EINVAL;
+ }
+
if (sdebug_guard > 1) {
pr_err("guard must be 0 or 1\n");
return -EINVAL;
--
2.20.1
From: Doug Berger <[email protected]>
[ Upstream commit 4ae5061a19b550dfe25397843427ed2ebab16b16 ]
When the default processor handling was added to the function
cpu_v7_spectre_init() it only excluded other ARM implemented processor
cores. The Broadcom Brahma B53 core is not implemented by ARM so it
ended up falling through into the set of processors that attempt to use
the ARM_SMCCC_ARCH_WORKAROUND_1 service to harden the branch predictor.
Since this workaround is not necessary for the Brahma-B53 this commit
explicitly checks for it and prevents it from applying a branch
predictor hardening workaround.
Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening")
Signed-off-by: Doug Berger <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/proc-v7-bugs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 9a07916af8dd..a6554fdb56c5 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -65,6 +65,9 @@ static void cpu_v7_spectre_init(void)
break;
#ifdef CONFIG_ARM_PSCI
+ case ARM_CPU_PART_BRAHMA_B53:
+ /* Requires no workaround */
+ break;
default:
/* Other ARM CPUs require no workaround */
if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit 61005d65b6c7dcf61c19516e6ebe5acc02d2cdda ]
My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing
intermittent errors like these in the log:
[11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
errors in other places, lets do the same in
hidpp20_batterylevel_get_battery_capacity to remove these harmless,
but scary looking errors from the dmesg output.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-logitech-hidpp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 034c883e57fa..504e8917b06f 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -978,6 +978,9 @@ static int hidpp20_batterylevel_get_battery_capacity(struct hidpp_device *hidpp,
ret = hidpp_send_fap_command_sync(hidpp, feature_index,
CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_LEVEL_STATUS,
NULL, 0, &response);
+ /* Ignore these intermittent errors */
+ if (ret == HIDPP_ERROR_RESOURCE_ERROR)
+ return -EIO;
if (ret > 0) {
hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
__func__, ret);
--
2.20.1
From: Anatol Pomazau <[email protected]>
[ Upstream commit 238191d65d7217982d69e21c1d623616da34b281 ]
If a faulty initiator fails to bind the socket to the iSCSI connection
before emitting a command, for instance, a subsequent send_pdu, it will
crash the kernel due to a null pointer dereference in sock_sendmsg(), as
shown in the log below. This patch makes sure the bind succeeded before
trying to use the socket.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker
[ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20
[...]
[ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282
[ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001
[ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000
[ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030
[ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00
[ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90
[ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000
[ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0
[ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 24.171214] Call Trace:
[ 24.171537] security_socket_sendmsg+0x3a/0x50
[ 24.172079] sock_sendmsg+0x16/0x60
[ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120
[ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170
[ 24.173604] ? iscsi_dbg_trace+0x63/0x80
[ 24.174087] iscsi_tcp_task_xmit+0x101/0x280
[ 24.174666] iscsi_xmit_task+0x83/0x110
[ 24.175206] iscsi_xmitworker+0x57/0x380
[ 24.175757] ? __schedule+0x2a2/0x700
[ 24.176273] process_one_work+0x1b5/0x360
[ 24.176837] worker_thread+0x50/0x3c0
[ 24.177353] kthread+0xf9/0x130
[ 24.177799] ? process_one_work+0x360/0x360
[ 24.178401] ? kthread_park+0x90/0x90
[ 24.178915] ret_from_fork+0x35/0x40
[ 24.179421] Modules linked in:
[ 24.179856] CR2: 0000000000000018
[ 24.180327] ---[ end trace b4b7674b6df5f480 ]---
Signed-off-by: Anatol Pomazau <[email protected]>
Co-developed-by: Frank Mayhar <[email protected]>
Signed-off-by: Frank Mayhar <[email protected]>
Co-developed-by: Bharath Ravi <[email protected]>
Signed-off-by: Bharath Ravi <[email protected]>
Co-developed-by: Khazhimsel Kumykov <[email protected]>
Signed-off-by: Khazhimsel Kumykov <[email protected]>
Co-developed-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/iscsi_tcp.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 23354f206533..55181d28291e 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -374,8 +374,16 @@ static int iscsi_sw_tcp_pdu_xmit(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
unsigned int noreclaim_flag;
+ struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+ struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data;
int rc = 0;
+ if (!tcp_sw_conn->sock) {
+ iscsi_conn_printk(KERN_ERR, conn,
+ "Transport not bound to socket!\n");
+ return -EINVAL;
+ }
+
noreclaim_flag = memalloc_noreclaim_save();
while (iscsi_sw_tcp_xmit_qlen(conn)) {
--
2.20.1
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 4ba32bdbd8c66d9c7822aea8dcf4e51410df84a8 which is
commit 14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.
It breaks the build.
Cc: Guenter Roeck <[email protected]>
Cc: Parth Shah <[email protected]>
Cc: Ihor Pasichnyk <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Gautham R. Shenoy <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Phil Auld <[email protected]>
Cc: Vaidyanathan Srinivasan <[email protected]>
Cc: Parth Shah <[email protected]>
Cc: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/spinlock.h | 4 +---
arch/powerpc/platforms/pseries/setup.c | 7 -------
2 files changed, 1 insertion(+), 10 deletions(-)
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -53,12 +53,10 @@
#endif
#ifdef CONFIG_PPC_PSERIES
-DECLARE_STATIC_KEY_FALSE(shared_processor);
-
#define vcpu_is_preempted vcpu_is_preempted
static inline bool vcpu_is_preempted(int cpu)
{
- if (!static_branch_unlikely(&shared_processor))
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR))
return false;
return !!(be32_to_cpu(lppaca_of(cpu).yield_count) & 1);
}
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -75,9 +75,6 @@
#include "pseries.h"
#include "../../../../drivers/pci/pci.h"
-DEFINE_STATIC_KEY_FALSE(shared_processor);
-EXPORT_SYMBOL_GPL(shared_processor);
-
int CMO_PrPSP = -1;
int CMO_SecPSP = -1;
unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K);
@@ -764,10 +761,6 @@ static void __init pSeries_setup_arch(vo
if (firmware_has_feature(FW_FEATURE_LPAR)) {
vpa_init(boot_cpuid);
-
- if (lppaca_shared_proc(get_lppaca()))
- static_branch_enable(&shared_processor);
-
ppc_md.power_save = pseries_lpar_idle;
ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
#ifdef CONFIG_PCI_IOV
From: Colin Ian King <[email protected]>
[ Upstream commit 00e0590dbaec6f1bcaa36a85467d7e3497ced522 ]
The sanity check in macro update_for_len checks to see if len
is less than zero, however, len is a size_t so it can never be
less than zero, so this sanity check is a no-op. Fix this by
making len a ssize_t so the comparison will work and add ulen
that is a size_t copy of len so that the min() macro won't
throw warnings about comparing different types.
Addresses-Coverity: ("Macro compares unsigned to 0")
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/apparmor/label.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/security/apparmor/label.c b/security/apparmor/label.c
index ba11bdf9043a..2469549842d2 100644
--- a/security/apparmor/label.c
+++ b/security/apparmor/label.c
@@ -1462,11 +1462,13 @@ static inline bool use_label_hname(struct aa_ns *ns, struct aa_label *label,
/* helper macro for snprint routines */
#define update_for_len(total, len, size, str) \
do { \
+ size_t ulen = len; \
+ \
AA_BUG(len < 0); \
- total += len; \
- len = min(len, size); \
- size -= len; \
- str += len; \
+ total += ulen; \
+ ulen = min(ulen, size); \
+ size -= ulen; \
+ str += ulen; \
} while (0)
/**
@@ -1601,7 +1603,7 @@ int aa_label_snxprint(char *str, size_t size, struct aa_ns *ns,
struct aa_ns *prev_ns = NULL;
struct label_it i;
int count = 0, total = 0;
- size_t len;
+ ssize_t len;
AA_BUG(!str && size != 0);
AA_BUG(!label);
--
2.20.1
From: Eric Dumazet <[email protected]>
commit 5604285839aaedfb23ebe297799c6e558939334d upstream.
syzbot is kind enough to remind us we need to call skb_may_pull()
BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
nf_hook include/linux/netfilter.h:260 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
__br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
__netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
__netif_receive_skb_one_core net/core/dev.c:4927 [inline]
__netif_receive_skb net/core/dev.c:5043 [inline]
process_backlog+0x610/0x13c0 net/core/dev.c:5874
napi_poll net/core/dev.c:6311 [inline]
net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
__do_softirq+0x4a1/0x83a kernel/softirq.c:293
do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
</IRQ>
do_softirq kernel/softirq.c:338 [inline]
__local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
__dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
packet_snd net/packet/af_packet.c:2959 [inline]
packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
__sys_sendto+0xc44/0xc70 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1960
__x64_sys_sendto+0x6e/0x90 net/socket.c:1960
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
slab_alloc_node mm/slub.c:2773 [inline]
__kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x306/0xa10 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
packet_alloc_skb net/packet/af_packet.c:2807 [inline]
packet_snd net/packet/af_packet.c:2902 [inline]
packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
__sys_sendto+0xc44/0xc70 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1960
__x64_sys_sendto+0x6e/0x90 net/socket.c:1960
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_netfilter_hooks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -646,6 +646,9 @@ static unsigned int br_nf_forward_arp(vo
nf_bridge_pull_encap_header(skb);
}
+ if (unlikely(!pskb_may_pull(skb, sizeof(struct arphdr))))
+ return NF_DROP;
+
if (arp_hdr(skb)->ar_pln != 4) {
if (IS_VLAN_ARP(skb))
nf_bridge_push_encap_header(skb);
From: Netanel Belgazal <[email protected]>
[ Upstream commit 24dee0c7478d1a1e00abdf5625b7f921467325dc ]
In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.
The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.
In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1197,8 +1197,8 @@ static int ena_io_poll(struct napi_struc
struct ena_napi *ena_napi = container_of(napi, struct ena_napi, napi);
struct ena_ring *tx_ring, *rx_ring;
- u32 tx_work_done;
- u32 rx_work_done;
+ int tx_work_done;
+ int rx_work_done = 0;
int tx_budget;
int napi_comp_call = 0;
int ret;
@@ -1215,7 +1215,11 @@ static int ena_io_poll(struct napi_struc
}
tx_work_done = ena_clean_tx_irq(tx_ring, tx_budget);
- rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
+ /* On netpoll the budget is zero and the handler should only clean the
+ * tx completions.
+ */
+ if (likely(budget))
+ rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
/* If the device is about to reset or down, avoid unmask
* the interrupt and return 0 so NAPI won't reschedule
From: Thomas Richter <[email protected]>
[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ]
Each SBDT is located at a 4KB page and contains 512 entries.
Each entry of a SDBT points to a SDB, a 4KB page containing
sampled data. The last entry is a link to another SDBT page.
When an event is created the function sequence executed is:
__hw_perf_event_init()
+--> allocate_buffers()
+--> realloc_sampling_buffers()
+---> alloc_sample_data_block()
Both functions realloc_sampling_buffers() and
alloc_sample_data_block() allocate pages and the allocation
can fail. This is handled correctly and all allocated
pages are freed and error -ENOMEM is returned to the
top calling function. Finally the event is not created.
Once the event has been created, the amount of initially
allocated SDBT and SDB can be too low. This is detected
during measurement interrupt handling, where the amount
of lost samples is calculated. If the number of lost samples
is too high considering sampling frequency and already allocated
SBDs, the number of SDBs is enlarged during the next execution
of cpumsf_pmu_enable().
If more SBDs need to be allocated, functions
realloc_sampling_buffers()
+---> alloc-sample_data_block()
are called to allocate more pages. Page allocation may fail
and the returned error is ignored. A SDBT and SDB setup
already exists.
However the modified SDBTs and SDBs might end up in a situation
where the first entry of an SDBT does not point to an SDB,
but another SDBT, basicly an SBDT without payload.
This can not be handled by the interrupt handler, where an SDBT
must have at least one entry pointing to an SBD.
Add a check to avoid SDBTs with out payload (SDBs) when enlarging
the buffer setup.
Signed-off-by: Thomas Richter <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/perf_cpum_sf.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index df92c2af99b6..5c3fd9032b74 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -193,7 +193,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
unsigned long num_sdb, gfp_t gfp_flags)
{
int i, rc;
- unsigned long *new, *tail;
+ unsigned long *new, *tail, *tail_prev = NULL;
if (!sfb->sdbt || !sfb->tail)
return -EINVAL;
@@ -232,6 +232,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
sfb->num_sdbt++;
/* Link current page to tail of chain */
*tail = (unsigned long)(void *) new + 1;
+ tail_prev = tail;
tail = new;
}
@@ -241,10 +242,22 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
* issue, a new realloc call (if required) might succeed.
*/
rc = alloc_sample_data_block(tail, gfp_flags);
- if (rc)
+ if (rc) {
+ /* Undo last SDBT. An SDBT with no SDB at its first
+ * entry but with an SDBT entry instead can not be
+ * handled by the interrupt handler code.
+ * Avoid this situation.
+ */
+ if (tail_prev) {
+ sfb->num_sdbt--;
+ free_page((unsigned long) new);
+ tail = tail_prev;
+ }
break;
+ }
sfb->num_sdb++;
tail++;
+ tail_prev = new = NULL; /* Allocated at least one SBD */
}
/* Link sampling buffer to its origin */
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]
The DTC v1.5.1 added references to (U)INT32_MAX.
This is no problem for user-space programs since <stdint.h> defines
(U)INT32_MAX along with (u)int32_t.
For the kernel space, libfdt_env.h needs to be adjusted before we
pull in the changes.
In the kernel, we usually use s/u32 instead of (u)int32_t for the
fixed-width types.
Accordingly, we already have S/U32_MAX for their max values.
So, we should not add (U)INT32_MAX to <linux/limits.h> any more.
Instead, add them to the in-kernel libfdt_env.h to compile the
latest libfdt.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/compressed/libfdt_env.h | 4 +++-
arch/powerpc/boot/libfdt_env.h | 2 ++
include/linux/libfdt_env.h | 3 +++
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index b36c0289a308..6a0f1f524466 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -2,11 +2,13 @@
#ifndef _ARM_LIBFDT_ENV_H
#define _ARM_LIBFDT_ENV_H
+#include <linux/limits.h>
#include <linux/types.h>
#include <linux/string.h>
#include <asm/byteorder.h>
-#define INT_MAX ((int)(~0U>>1))
+#define INT32_MAX S32_MAX
+#define UINT32_MAX U32_MAX
typedef __be16 fdt16_t;
typedef __be32 fdt32_t;
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index 2abc8e83b95e..9757d4f6331e 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -6,6 +6,8 @@
#include <string.h>
#define INT_MAX ((int)(~0U>>1))
+#define UINT32_MAX ((u32)~0U)
+#define INT32_MAX ((s32)(UINT32_MAX >> 1))
#include "of.h"
diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h
index edb0f0c30904..1adf54aad2df 100644
--- a/include/linux/libfdt_env.h
+++ b/include/linux/libfdt_env.h
@@ -7,6 +7,9 @@
#include <asm/byteorder.h>
+#define INT32_MAX S32_MAX
+#define UINT32_MAX U32_MAX
+
typedef __be16 fdt16_t;
typedef __be32 fdt32_t;
typedef __be64 fdt64_t;
--
2.20.1
From: Cambda Zhu <[email protected]>
[ Upstream commit 853697504de043ff0bfd815bd3a64de1dce73dc7 ]
>From commit 50895b9de1d3 ("tcp: highest_sack fix"), the logic about
setting tp->highest_sack to the head of the send queue was removed.
Of course the logic is error prone, but it is logical. Before we
remove the pointer to the highest sack skb and use the seq instead,
we need to set tp->highest_sack to NULL when there is no skb after
the last sack, and then replace NULL with the real skb when new skb
inserted into the rtx queue, because the NULL means the highest sack
seq is tp->snd_nxt. If tp->highest_sack is NULL and new data sent,
the next ACK with sack option will increase tp->reordering unexpectedly.
This patch sets tp->highest_sack to the tail of the rtx queue if
it's NULL and new data is sent. The patch keeps the rule that the
highest_sack can only be maintained by sack processing, except for
this only case.
Fixes: 50895b9de1d3 ("tcp: highest_sack fix")
Signed-off-by: Cambda Zhu <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_output.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -60,6 +60,9 @@ static void tcp_event_new_data_sent(stru
__skb_unlink(skb, &sk->sk_write_queue);
tcp_rbtree_insert(&sk->tcp_rtx_queue, skb);
+ if (tp->highest_sack == NULL)
+ tp->highest_sack = skb;
+
tp->packets_out += tcp_skb_pcount(skb);
if (!prior_packets || icsk->icsk_pending == ICSK_TIME_LOSS_PROBE)
tcp_rearm_rto(sk);
From: Johannes Weiner <[email protected]>
[ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]
Currently, the drop_caches proc file and sysctl read back the last value
written, suggesting this is somehow a stateful setting instead of a
one-time command. Make it write-only, like e.g. compact_memory.
While mitigating a VM problem at scale in our fleet, there was confusion
about whether writing to this file will permanently switch the kernel into
a non-caching mode. This influences the decision making in a tense
situation, where tens of people are trying to fix tens of thousands of
affected machines: Do we need a rollback strategy? What are the
performance implications of operating in a non-caching state for several
days? It also caused confusion when the kernel team said we may need to
write the file several times to make sure it's effective ("But it already
reads back 3?").
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Chris Down <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sysctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index f8576509c7be..4c4fd4339d33 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1411,7 +1411,7 @@ static struct ctl_table vm_table[] = {
.procname = "drop_caches",
.data = &sysctl_drop_caches,
.maxlen = sizeof(int),
- .mode = 0644,
+ .mode = 0200,
.proc_handler = drop_caches_sysctl_handler,
.extra1 = &one,
.extra2 = &four,
--
2.20.1
From: Hangbin Liu <[email protected]>
[ Upstream commit 6e9105c73f8d2163d12d5dfd762fd75483ed30f5 ]
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not
call dst_confirm_neigh(), we still set it to false to keep consistency with
IPv6 code.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -545,7 +545,7 @@ static int gtp_build_skb_ip4(struct sk_b
mtu = dst_mtu(&rt->dst);
}
- rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, true);
+ rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, false);
if (!skb_is_gso(skb) && (iph->frag_off & htons(IP_DF)) &&
mtu < ntohs(iph->tot_len)) {
From: Hangbin Liu <[email protected]>
[ Upstream commit 07dc35c6e3cc3c001915d05f5bf21f80a39a0970 ]
Add a new function skb_dst_update_pmtu_no_confirm() for callers who need
update pmtu but should not do neighbor confirm.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/dst.h | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -530,6 +530,15 @@ static inline void skb_dst_update_pmtu(s
dst->ops->update_pmtu(dst, NULL, skb, mtu, true);
}
+/* update dst pmtu but not do neighbor confirm */
+static inline void skb_dst_update_pmtu_no_confirm(struct sk_buff *skb, u32 mtu)
+{
+ struct dst_entry *dst = skb_dst(skb);
+
+ if (dst && dst->ops->update_pmtu)
+ dst->ops->update_pmtu(dst, NULL, skb, mtu, false);
+}
+
static inline void skb_tunnel_check_pmtu(struct sk_buff *skb,
struct dst_entry *encap_dst,
int headroom)
From: Marco Oliverio <[email protected]>
[ Upstream commit 0b9173f4688dfa7c5d723426be1d979c24ce3d51 ]
Bridge packets that are forwarded have skb->dst == NULL and get
dropped by the check introduced by
b60a77386b1d4868f72f6353d35dabe5fbe981f2 (net: make skb_dst_force
return true when dst is refcounted).
To fix this we check skb_dst() before skb_dst_force(), so we don't
drop skb packet with dst == NULL. This holds also for skb at the
PRE_ROUTING hook so we remove the second check.
Fixes: b60a77386b1d ("net: make skb_dst_force return true when dst is refcounted")
Signed-off-by: Marco Oliverio <[email protected]>
Signed-off-by: Rocco Folino <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index a96a8c16baf9..ee6d98355081 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -174,7 +174,7 @@ static int __nf_queue(struct sk_buff *skb, const struct nf_hook_state *state,
goto err;
}
- if (!skb_dst_force(skb) && state->hook != NF_INET_PRE_ROUTING) {
+ if (skb_dst(skb) && !skb_dst_force(skb)) {
status = -ENETDOWN;
goto err;
}
--
2.20.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 475feec0c41ad71cb7d02f0310e56256606b57c5 ]
We made the error message for the CORB/RIRB communication clearer by
upgrading to dev_WARN() so that user can notice better. But this
struck us like a boomerang: now it caught syzbot and reported back as
a fatal issue although it's not really any too serious bug that worth
for stopping the whole system.
OK, OK, let's be softy, downgrade it to the standard dev_err() again.
Fixes: dd65f7e19c69 ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_controller.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 8fcb421193e0..fa261b27d858 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -883,7 +883,7 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
return -EAGAIN; /* give a chance to retry */
}
- dev_WARN(chip->card->dev,
+ dev_err(chip->card->dev,
"azx_get_response timeout, switching to single_cmd mode: last cmd=0x%08x\n",
bus->last_cmd[addr]);
chip->single_cmd = 1;
--
2.20.1
From: Logan Gunthorpe <[email protected]>
commit 6acdf7e19b37cb3a9258603d0eab315079c19c5e upstream.
The part_event_bitmap register is 64 bits wide, so read it with ioread64()
instead of the 32-bit ioread32().
Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Doug Meyer <[email protected]>
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected] # v4.12+
Cc: Kelvin Cao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/switch/switchtec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -633,7 +633,7 @@ static int ioctl_event_summary(struct sw
u32 reg;
s.global = ioread32(&stdev->mmio_sw_event->global_summary);
- s.part_bitmap = ioread32(&stdev->mmio_sw_event->part_event_bitmap);
+ s.part_bitmap = readq(&stdev->mmio_sw_event->part_event_bitmap);
s.local_part = ioread32(&stdev->mmio_part_cfg->part_event_summary);
for (i = 0; i < stdev->partition_count; i++) {
From: Eric Dumazet <[email protected]>
commit 5c9934b6767b16ba60be22ec3cbd4379ad64170d upstream.
We got another syzbot report [1] that tells us we must use
write_lock_irq()/write_unlock_irq() to avoid possible deadlock.
[1]
WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
tiocsetd drivers/tty/tty_io.c:2337 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
vfs_ioctl fs/ioctl.c:47 [inline]
file_ioctl fs/ioctl.c:545 [inline]
do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
__do_sys_ioctl fs/ioctl.c:756 [inline]
__se_sys_ioctl fs/ioctl.c:754 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(disc_data_lock);
<Interrupt>
lock(disc_data_lock);
*** DEADLOCK ***
5 locks held by syz-executor826/9605:
#0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
#1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116
#3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823
#4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288
stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
valid_state kernel/locking/lockdep.c:3112 [inline]
mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
mark_usage kernel/locking/lockdep.c:3554 [inline]
__lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
_raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
__handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
</IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7
RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899
R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138
R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000
mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
__mutex_lock_common kernel/locking/mutex.c:962 [inline]
__mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
__fput+0x2ff/0x890 fs/file_table.c:280
____fput+0x16/0x20 fs/file_table.c:313
task_work_run+0x145/0x1c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x8e7/0x2ef0 kernel/exit.c:797
do_group_exit+0x135/0x360 kernel/exit.c:895
__do_sys_exit_group kernel/exit.c:906 [inline]
__se_sys_exit_group kernel/exit.c:904 [inline]
__x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8
RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0
R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001
R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000
Fixes: 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/hamradio/6pack.c | 4 ++--
drivers/net/hamradio/mkiss.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -654,10 +654,10 @@ static void sixpack_close(struct tty_str
{
struct sixpack *sp;
- write_lock_bh(&disc_data_lock);
+ write_lock_irq(&disc_data_lock);
sp = tty->disc_data;
tty->disc_data = NULL;
- write_unlock_bh(&disc_data_lock);
+ write_unlock_irq(&disc_data_lock);
if (!sp)
return;
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -783,10 +783,10 @@ static void mkiss_close(struct tty_struc
{
struct mkiss *ax;
- write_lock_bh(&disc_data_lock);
+ write_lock_irq(&disc_data_lock);
ax = tty->disc_data;
tty->disc_data = NULL;
- write_unlock_bh(&disc_data_lock);
+ write_unlock_irq(&disc_data_lock);
if (!ax)
return;
From: Linus Torvalds <[email protected]>
commit 8a23eb804ca4f2be909e372cf5a9e7b30ae476cd upstream.
This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().
This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.
There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.
There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption. It's really more
"protect user space from bad behavior" as pointed out by Jann. But
since Eric Biederman looked up the POSIX wording, here it is for context:
"From readdir:
The readdir() function shall return a pointer to a structure
representing the directory entry at the current position in the
directory stream specified by the argument dirp, and position the
directory stream at the next entry. It shall return a null pointer
upon reaching the end of the directory stream. The structure dirent
defined in the <dirent.h> header describes a directory entry.
From definitions:
3.129 Directory Entry (or Link)
An object that associates a filename with a file. Several directory
entries can associate names with the same file.
...
3.169 Filename
A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
characters composing the name may be selected from the set of all
character values excluding the slash character and the null byte. The
filenames dot and dot-dot have special meaning. A filename is
sometimes referred to as a 'pathname component'."
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.
We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')
See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: Alexander Viro <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Siddharth Chandrasekaran <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/readdir.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -65,6 +65,40 @@ out:
EXPORT_SYMBOL(iterate_dir);
/*
+ * POSIX says that a dirent name cannot contain NULL or a '/'.
+ *
+ * It's not 100% clear what we should really do in this case.
+ * The filesystem is clearly corrupted, but returning a hard
+ * error means that you now don't see any of the other names
+ * either, so that isn't a perfect alternative.
+ *
+ * And if you return an error, what error do you use? Several
+ * filesystems seem to have decided on EUCLEAN being the error
+ * code for EFSCORRUPTED, and that may be the error to use. Or
+ * just EIO, which is perhaps more obvious to users.
+ *
+ * In order to see the other file names in the directory, the
+ * caller might want to make this a "soft" error: skip the
+ * entry, and return the error at the end instead.
+ *
+ * Note that this should likely do a "memchr(name, 0, len)"
+ * check too, since that would be filesystem corruption as
+ * well. However, that case can't actually confuse user space,
+ * which has to do a strlen() on the name anyway to find the
+ * filename length, and the above "soft error" worry means
+ * that it's probably better left alone until we have that
+ * issue clarified.
+ */
+static int verify_dirent_name(const char *name, int len)
+{
+ if (WARN_ON_ONCE(!len))
+ return -EIO;
+ if (WARN_ON_ONCE(memchr(name, '/', len)))
+ return -EIO;
+ return 0;
+}
+
+/*
* Traditional linux readdir() handling..
*
* "count=1" is a special case, meaning that the buffer is one
@@ -173,6 +207,9 @@ static int filldir(struct dir_context *c
int reclen = ALIGN(offsetof(struct linux_dirent, d_name) + namlen + 2,
sizeof(long));
+ buf->error = verify_dirent_name(name, namlen);
+ if (unlikely(buf->error))
+ return buf->error;
buf->error = -EINVAL; /* only used if we fail.. */
if (reclen > buf->count)
return -EINVAL;
@@ -259,6 +296,9 @@ static int filldir64(struct dir_context
int reclen = ALIGN(offsetof(struct linux_dirent64, d_name) + namlen + 1,
sizeof(u64));
+ buf->error = verify_dirent_name(name, namlen);
+ if (unlikely(buf->error))
+ return buf->error;
buf->error = -EINVAL; /* only used if we fail.. */
if (reclen > buf->count)
return -EINVAL;
From: David Engraf <[email protected]>
[ Upstream commit cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 ]
Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode
register was already written thus the clock selection is ignored.
Fix by doing the baud rate calulation before setting the mode.
Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support")
Signed-off-by: David Engraf <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Acked-by: Richard Genoud <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 43 ++++++++++++++++---------------
1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index dd8949e8fcd7..f34520e9ad6e 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2154,27 +2154,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
mode |= ATMEL_US_USMODE_NORMAL;
}
- /* set the mode, clock divisor, parity, stop bits and data size */
- atmel_uart_writel(port, ATMEL_US_MR, mode);
-
- /*
- * when switching the mode, set the RTS line state according to the
- * new mode, otherwise keep the former state
- */
- if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
- unsigned int rts_state;
-
- if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
- /* let the hardware control the RTS line */
- rts_state = ATMEL_US_RTSDIS;
- } else {
- /* force RTS line to low level */
- rts_state = ATMEL_US_RTSEN;
- }
-
- atmel_uart_writel(port, ATMEL_US_CR, rts_state);
- }
-
/*
* Set the baud rate:
* Fractional baudrate allows to setup output frequency more
@@ -2200,6 +2179,28 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
quot = cd | fp << ATMEL_US_FP_OFFSET;
atmel_uart_writel(port, ATMEL_US_BRGR, quot);
+
+ /* set the mode, clock divisor, parity, stop bits and data size */
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
+
+ /*
+ * when switching the mode, set the RTS line state according to the
+ * new mode, otherwise keep the former state
+ */
+ if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+ unsigned int rts_state;
+
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* let the hardware control the RTS line */
+ rts_state = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to low level */
+ rts_state = ATMEL_US_RTSEN;
+ }
+
+ atmel_uart_writel(port, ATMEL_US_CR, rts_state);
+ }
+
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
atmel_port->tx_stopped = false;
--
2.20.1
From: Vladyslav Tarasiuk <[email protected]>
[ Upstream commit a5bcd72e054aabb93ddc51ed8cde36a5bfc50271 ]
The burning process requires to perform internal allocations of large
chunks of memory. This memory doesn't need to be contiguous and can be
safely allocated by vzalloc() instead of kzalloc(). This patch changes
such allocation to avoid possible out-of-memory failure.
Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Vladyslav Tarasiuk <[email protected]>
Reviewed-by: Aya Levin <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c
+++ b/drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c
@@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netlink.h>
+#include <linux/vmalloc.h>
#include <linux/xz.h>
#include "mlxfw_mfa2.h"
#include "mlxfw_mfa2_file.h"
@@ -579,7 +580,7 @@ mlxfw_mfa2_file_component_get(const stru
comp_size = be32_to_cpu(comp->size);
comp_buf_size = comp_size + mlxfw_mfa2_comp_magic_len;
- comp_data = kmalloc(sizeof(*comp_data) + comp_buf_size, GFP_KERNEL);
+ comp_data = vzalloc(sizeof(*comp_data) + comp_buf_size);
if (!comp_data)
return ERR_PTR(-ENOMEM);
comp_data->comp.data_size = comp_size;
@@ -601,7 +602,7 @@ mlxfw_mfa2_file_component_get(const stru
comp_data->comp.data = comp_data->buff + mlxfw_mfa2_comp_magic_len;
return &comp_data->comp;
err_out:
- kfree(comp_data);
+ vfree(comp_data);
return ERR_PTR(err);
}
@@ -610,7 +611,7 @@ void mlxfw_mfa2_file_component_put(struc
const struct mlxfw_mfa2_comp_data *comp_data;
comp_data = container_of(comp, struct mlxfw_mfa2_comp_data, comp);
- kfree(comp_data);
+ vfree(comp_data);
}
void mlxfw_mfa2_file_fini(struct mlxfw_mfa2_file *mfa2_file)
From: Vladis Dronov <[email protected]>
[ Upstream commit a33121e5487b424339636b25c35d3a180eaa5f5e ]
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:
ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!
This happens in:
static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here
Namely:
__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!
Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.
Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.
This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7fda ("chardev: add
helper function to register char devs with a struct device").
Link: https://lore.kernel.org/linux-fsdevel/[email protected]/T/#u
Analyzed-by: Stephen Johnston <[email protected]>
Analyzed-by: Vern Lovejoy <[email protected]>
Signed-off-by: Vladis Dronov <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ptp/ptp_clock.c | 31 ++++++++++++++-----------------
drivers/ptp/ptp_private.h | 2 +-
include/linux/posix-clock.h | 19 +++++++++++--------
kernel/time/posix-clock.c | 31 +++++++++++++------------------
4 files changed, 39 insertions(+), 44 deletions(-)
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -175,9 +175,9 @@ static struct posix_clock_operations ptp
.read = ptp_read,
};
-static void delete_ptp_clock(struct posix_clock *pc)
+static void ptp_clock_release(struct device *dev)
{
- struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
+ struct ptp_clock *ptp = container_of(dev, struct ptp_clock, dev);
mutex_destroy(&ptp->tsevq_mux);
mutex_destroy(&ptp->pincfg_mux);
@@ -222,7 +222,6 @@ struct ptp_clock *ptp_clock_register(str
}
ptp->clock.ops = ptp_clock_ops;
- ptp->clock.release = delete_ptp_clock;
ptp->info = info;
ptp->devid = MKDEV(major, index);
ptp->index = index;
@@ -249,15 +248,6 @@ struct ptp_clock *ptp_clock_register(str
if (err)
goto no_pin_groups;
- /* Create a new device in our class. */
- ptp->dev = device_create_with_groups(ptp_class, parent, ptp->devid,
- ptp, ptp->pin_attr_groups,
- "ptp%d", ptp->index);
- if (IS_ERR(ptp->dev)) {
- err = PTR_ERR(ptp->dev);
- goto no_device;
- }
-
/* Register a new PPS source. */
if (info->pps) {
struct pps_source_info pps;
@@ -273,8 +263,18 @@ struct ptp_clock *ptp_clock_register(str
}
}
- /* Create a posix clock. */
- err = posix_clock_register(&ptp->clock, ptp->devid);
+ /* Initialize a new device of our class in our clock structure. */
+ device_initialize(&ptp->dev);
+ ptp->dev.devt = ptp->devid;
+ ptp->dev.class = ptp_class;
+ ptp->dev.parent = parent;
+ ptp->dev.groups = ptp->pin_attr_groups;
+ ptp->dev.release = ptp_clock_release;
+ dev_set_drvdata(&ptp->dev, ptp);
+ dev_set_name(&ptp->dev, "ptp%d", ptp->index);
+
+ /* Create a posix clock and link it to the device. */
+ err = posix_clock_register(&ptp->clock, &ptp->dev);
if (err) {
pr_err("failed to create posix clock\n");
goto no_clock;
@@ -286,8 +286,6 @@ no_clock:
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
no_pps:
- device_destroy(ptp_class, ptp->devid);
-no_device:
ptp_cleanup_pin_groups(ptp);
no_pin_groups:
if (ptp->kworker)
@@ -317,7 +315,6 @@ int ptp_clock_unregister(struct ptp_cloc
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
- device_destroy(ptp_class, ptp->devid);
ptp_cleanup_pin_groups(ptp);
posix_clock_unregister(&ptp->clock);
--- a/drivers/ptp/ptp_private.h
+++ b/drivers/ptp/ptp_private.h
@@ -41,7 +41,7 @@ struct timestamp_event_queue {
struct ptp_clock {
struct posix_clock clock;
- struct device *dev;
+ struct device dev;
struct ptp_clock_info *info;
dev_t devid;
int index; /* index into clocks.map */
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -82,29 +82,32 @@ struct posix_clock_operations {
*
* @ops: Functional interface to the clock
* @cdev: Character device instance for this clock
- * @kref: Reference count.
+ * @dev: Pointer to the clock's device.
* @rwsem: Protects the 'zombie' field from concurrent access.
* @zombie: If 'zombie' is true, then the hardware has disappeared.
- * @release: A function to free the structure when the reference count reaches
- * zero. May be NULL if structure is statically allocated.
*
* Drivers should embed their struct posix_clock within a private
* structure, obtaining a reference to it during callbacks using
* container_of().
+ *
+ * Drivers should supply an initialized but not exposed struct device
+ * to posix_clock_register(). It is used to manage lifetime of the
+ * driver's private structure. It's 'release' field should be set to
+ * a release function for this private structure.
*/
struct posix_clock {
struct posix_clock_operations ops;
struct cdev cdev;
- struct kref kref;
+ struct device *dev;
struct rw_semaphore rwsem;
bool zombie;
- void (*release)(struct posix_clock *clk);
};
/**
* posix_clock_register() - register a new clock
- * @clk: Pointer to the clock. Caller must provide 'ops' and 'release'
- * @devid: Allocated device id
+ * @clk: Pointer to the clock. Caller must provide 'ops' field
+ * @dev: Pointer to the initialized device. Caller must provide
+ * 'release' field
*
* A clock driver calls this function to register itself with the
* clock device subsystem. If 'clk' points to dynamically allocated
@@ -113,7 +116,7 @@ struct posix_clock {
*
* Returns zero on success, non-zero otherwise.
*/
-int posix_clock_register(struct posix_clock *clk, dev_t devid);
+int posix_clock_register(struct posix_clock *clk, struct device *dev);
/**
* posix_clock_unregister() - unregister a clock
--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -27,8 +27,6 @@
#include "posix-timers.h"
-static void delete_clock(struct kref *kref);
-
/*
* Returns NULL if the posix_clock instance attached to 'fp' is old and stale.
*/
@@ -138,7 +136,7 @@ static int posix_clock_open(struct inode
err = 0;
if (!err) {
- kref_get(&clk->kref);
+ get_device(clk->dev);
fp->private_data = clk;
}
out:
@@ -154,7 +152,7 @@ static int posix_clock_release(struct in
if (clk->ops.release)
err = clk->ops.release(clk);
- kref_put(&clk->kref, delete_clock);
+ put_device(clk->dev);
fp->private_data = NULL;
@@ -174,38 +172,35 @@ static const struct file_operations posi
#endif
};
-int posix_clock_register(struct posix_clock *clk, dev_t devid)
+int posix_clock_register(struct posix_clock *clk, struct device *dev)
{
int err;
- kref_init(&clk->kref);
init_rwsem(&clk->rwsem);
cdev_init(&clk->cdev, &posix_clock_file_operations);
+ err = cdev_device_add(&clk->cdev, dev);
+ if (err) {
+ pr_err("%s unable to add device %d:%d\n",
+ dev_name(dev), MAJOR(dev->devt), MINOR(dev->devt));
+ return err;
+ }
clk->cdev.owner = clk->ops.owner;
- err = cdev_add(&clk->cdev, devid, 1);
+ clk->dev = dev;
- return err;
+ return 0;
}
EXPORT_SYMBOL_GPL(posix_clock_register);
-static void delete_clock(struct kref *kref)
-{
- struct posix_clock *clk = container_of(kref, struct posix_clock, kref);
-
- if (clk->release)
- clk->release(clk);
-}
-
void posix_clock_unregister(struct posix_clock *clk)
{
- cdev_del(&clk->cdev);
+ cdev_device_del(&clk->cdev, clk->dev);
down_write(&clk->rwsem);
clk->zombie = true;
up_write(&clk->rwsem);
- kref_put(&clk->kref, delete_clock);
+ put_device(clk->dev);
}
EXPORT_SYMBOL_GPL(posix_clock_unregister);
From: Hangbin Liu <[email protected]>
[ Upstream commit f081042d128a0c7acbd67611def62e1b52e2d294 ]
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
So disable the neigh confirm for vxlan and geneve pmtu update.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Reviewed-by: Guillaume Nault <[email protected]>
Tested-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/dst.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -546,7 +546,7 @@ static inline void skb_tunnel_check_pmtu
u32 encap_mtu = dst_mtu(encap_dst);
if (skb->len > encap_mtu - headroom)
- skb_dst_update_pmtu(skb, encap_mtu - headroom);
+ skb_dst_update_pmtu_no_confirm(skb, encap_mtu - headroom);
}
#endif /* _NET_DST_H */
From: Taehee Yoo <[email protected]>
[ Upstream commit 94a6d9fb88df43f92d943c32b84ce398d50bf49f ]
gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used
to dump pdp contexts. it would be re-executed because of dump packet size.
If dump packet size is too big, it saves current dump pointer
(gtp interface pointer, bucket, TID value) then it restarts dump from
last pointer.
Current GTP code allows adding zero TID pdp context but dump code
ignores zero TID value. So, last dump pointer will not be found.
In addition, this patch adds missing rcu_read_lock() in
gtp_genl_dump_pdp().
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 36 +++++++++++++++++++-----------------
1 file changed, 19 insertions(+), 17 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -42,7 +42,6 @@ struct pdp_ctx {
struct hlist_node hlist_addr;
union {
- u64 tid;
struct {
u64 tid;
u16 flow;
@@ -1249,43 +1248,46 @@ static int gtp_genl_dump_pdp(struct sk_b
struct netlink_callback *cb)
{
struct gtp_dev *last_gtp = (struct gtp_dev *)cb->args[2], *gtp;
+ int i, j, bucket = cb->args[0], skip = cb->args[1];
struct net *net = sock_net(skb->sk);
- struct gtp_net *gn = net_generic(net, gtp_net_id);
- unsigned long tid = cb->args[1];
- int i, k = cb->args[0], ret;
struct pdp_ctx *pctx;
+ struct gtp_net *gn;
+
+ gn = net_generic(net, gtp_net_id);
if (cb->args[4])
return 0;
+ rcu_read_lock();
list_for_each_entry_rcu(gtp, &gn->gtp_dev_list, list) {
if (last_gtp && last_gtp != gtp)
continue;
else
last_gtp = NULL;
- for (i = k; i < gtp->hash_size; i++) {
- hlist_for_each_entry_rcu(pctx, >p->tid_hash[i], hlist_tid) {
- if (tid && tid != pctx->u.tid)
- continue;
- else
- tid = 0;
-
- ret = gtp_genl_fill_info(skb,
- NETLINK_CB(cb->skb).portid,
- cb->nlh->nlmsg_seq,
- cb->nlh->nlmsg_type, pctx);
- if (ret < 0) {
+ for (i = bucket; i < gtp->hash_size; i++) {
+ j = 0;
+ hlist_for_each_entry_rcu(pctx, >p->tid_hash[i],
+ hlist_tid) {
+ if (j >= skip &&
+ gtp_genl_fill_info(skb,
+ NETLINK_CB(cb->skb).portid,
+ cb->nlh->nlmsg_seq,
+ cb->nlh->nlmsg_type, pctx)) {
cb->args[0] = i;
- cb->args[1] = pctx->u.tid;
+ cb->args[1] = j;
cb->args[2] = (unsigned long)gtp;
goto out;
}
+ j++;
}
+ skip = 0;
}
+ bucket = 0;
}
cb->args[4] = 1;
out:
+ rcu_read_unlock();
return skb->len;
}
From: Taehee Yoo <[email protected]>
[ Upstream commit 94dc550a5062030569d4aa76e10e50c8fc001930 ]
ipv4_pdp_find() is called in TX packet path of GTP.
ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context.
In the current code, gtp->tid_hash and gtp->addr_hash are freed by
->dellink(), which is gtp_dellink().
But gtp_dellink() would be called while packets are processing.
So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash.
Instead, dev->priv_destructor() would be used because this callback
is called after all packet processing safely.
Test commands:
ip link add veth1 type veth peer name veth2
ip a a 172.0.0.1/24 dev veth1
ip link set veth1 up
ip a a 172.99.0.1/32 dev lo
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2
ip r a 172.99.0.2/32 dev gtp1
ip link set gtp1 mtu 1500
ip netns add ns2
ip link set veth2 netns ns2
ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2
ip netns exec ns2 ip link set veth2 up
ip netns exec ns2 ip a a 172.99.0.2/32 dev lo
ip netns exec ns2 ip link set lo up
ip netns exec ns2 gtp-link add gtp2 &
ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1
ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2
ip netns exec ns2 ip link set gtp2 mtu 1500
hping3 172.99.0.2 -2 --flood &
ip link del gtp1
Splat looks like:
[ 72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[ 72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195
[ 72.569631][ T1195]
[ 72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199
[ 72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 72.571438][ T1195] Call Trace:
[ 72.571764][ T1195] dump_stack+0x96/0xdb
[ 72.572171][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[ 72.572761][ T1195] print_address_description.constprop.5+0x1be/0x360
[ 72.573400][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[ 72.573971][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[ 72.574544][ T1195] __kasan_report+0x12a/0x16f
[ 72.575014][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[ 72.575593][ T1195] kasan_report+0xe/0x20
[ 72.576004][ T1195] ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[ 72.576577][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp]
[ ... ]
[ 72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28
[ 72.648512][ T1195] #PF: supervisor read access in kernel mode
[ 72.649158][ T1195] #PF: error_code(0x0000) - not-present page
[ 72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060
[ 72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G B 5.5.0-rc1 #199
[ 72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp]
[ ... ]
[ 72.679168][ T1195] Call Trace:
[ 72.679603][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp]
[ 72.681915][ T1195] ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp]
[ 72.682513][ T1195] ? lock_acquire+0x164/0x3b0
[ 72.682966][ T1195] ? gtp_dev_xmit+0x35e/0x890 [gtp]
[ 72.683481][ T1195] gtp_dev_xmit+0x3c2/0x890 [gtp]
[ ... ]
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -644,9 +644,16 @@ static void gtp_link_setup(struct net_de
}
static int gtp_hashtable_new(struct gtp_dev *gtp, int hsize);
-static void gtp_hashtable_free(struct gtp_dev *gtp);
static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[]);
+static void gtp_destructor(struct net_device *dev)
+{
+ struct gtp_dev *gtp = netdev_priv(dev);
+
+ kfree(gtp->addr_hash);
+ kfree(gtp->tid_hash);
+}
+
static int gtp_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
@@ -681,13 +688,15 @@ static int gtp_newlink(struct net *src_n
gn = net_generic(dev_net(dev), gtp_net_id);
list_add_rcu(>p->list, &gn->gtp_dev_list);
+ dev->priv_destructor = gtp_destructor;
netdev_dbg(dev, "registered new GTP interface\n");
return 0;
out_hashtable:
- gtp_hashtable_free(gtp);
+ kfree(gtp->addr_hash);
+ kfree(gtp->tid_hash);
out_encap:
gtp_encap_disable(gtp);
return err;
@@ -696,9 +705,14 @@ out_encap:
static void gtp_dellink(struct net_device *dev, struct list_head *head)
{
struct gtp_dev *gtp = netdev_priv(dev);
+ struct pdp_ctx *pctx;
+ int i;
+
+ for (i = 0; i < gtp->hash_size; i++)
+ hlist_for_each_entry_rcu(pctx, >p->tid_hash[i], hlist_tid)
+ pdp_context_delete(pctx);
gtp_encap_disable(gtp);
- gtp_hashtable_free(gtp);
list_del_rcu(>p->list);
unregister_netdevice_queue(dev, head);
}
@@ -776,20 +790,6 @@ err1:
return -ENOMEM;
}
-static void gtp_hashtable_free(struct gtp_dev *gtp)
-{
- struct pdp_ctx *pctx;
- int i;
-
- for (i = 0; i < gtp->hash_size; i++)
- hlist_for_each_entry_rcu(pctx, >p->tid_hash[i], hlist_tid)
- pdp_context_delete(pctx);
-
- synchronize_rcu();
- kfree(gtp->addr_hash);
- kfree(gtp->tid_hash);
-}
-
static struct sock *gtp_encap_enable_socket(int fd, int type,
struct gtp_dev *gtp)
{
From: Hangbin Liu <[email protected]>
[ Upstream commit 675d76ad0ad5bf41c9a129772ef0aba8f57ea9a7 ]
When we do ipv6 gre pmtu update, we will also do neigh confirm currently.
This will cause the neigh cache be refreshed and set to REACHABLE before
xmit.
But if the remote mac address changed, e.g. device is deleted and recreated,
we will not able to notice this and still use the old mac address as the neigh
cache is REACHABLE.
Fix this by disable neigh confirm when do pmtu update
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reported-by: Jianlin Shi <[email protected]>
Reviewed-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1060,7 +1060,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit
/* TooBig packet may have updated dst->dev's mtu */
if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu)
- dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu, true);
+ dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu, false);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
NEXTHDR_GRE);
From: Mike Rapoport <[email protected]>
[ Upstream commit 3c1c24d91ffd536de0a64688a9df7f49e58fadbc ]
A while ago Andy noticed
(http://lkml.kernel.org/r/CALCETrWY+5ynDct7eU_nDUqx=okQvjm=Y5wJvA4ahBja=CQXGw@mail.gmail.com)
that UFFD_FEATURE_EVENT_FORK used by an unprivileged user may have
security implications.
As the first step of the solution the following patch limits the availably
of UFFD_FEATURE_EVENT_FORK only for those having CAP_SYS_PTRACE.
The usage of CAP_SYS_PTRACE ensures compatibility with CRIU.
Yet, if there are other users of non-cooperative userfaultfd that run
without CAP_SYS_PTRACE, they would be broken :(
Current implementation of UFFD_FEATURE_EVENT_FORK modifies the file
descriptor table from the read() implementation of uffd, which may have
security implications for unprivileged use of the userfaultfd.
Limit availability of UFFD_FEATURE_EVENT_FORK only for callers that have
CAP_SYS_PTRACE.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Reviewed-by: Andrea Arcangeli <[email protected]>
Cc: Daniel Colascione <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Nick Kralevich <[email protected]>
Cc: Nosh Minwalla <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Cc: Tim Murray <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/userfaultfd.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c
index 9c2955f67f70..d269d1139f7f 100644
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -1833,13 +1833,12 @@ static int userfaultfd_api(struct userfaultfd_ctx *ctx,
if (copy_from_user(&uffdio_api, buf, sizeof(uffdio_api)))
goto out;
features = uffdio_api.features;
- if (uffdio_api.api != UFFD_API || (features & ~UFFD_API_FEATURES)) {
- memset(&uffdio_api, 0, sizeof(uffdio_api));
- if (copy_to_user(buf, &uffdio_api, sizeof(uffdio_api)))
- goto out;
- ret = -EINVAL;
- goto out;
- }
+ ret = -EINVAL;
+ if (uffdio_api.api != UFFD_API || (features & ~UFFD_API_FEATURES))
+ goto err_out;
+ ret = -EPERM;
+ if ((features & UFFD_FEATURE_EVENT_FORK) && !capable(CAP_SYS_PTRACE))
+ goto err_out;
/* report all available features and ioctls to userland */
uffdio_api.features = UFFD_API_FEATURES;
uffdio_api.ioctls = UFFD_API_IOCTLS;
@@ -1852,6 +1851,11 @@ static int userfaultfd_api(struct userfaultfd_ctx *ctx,
ret = 0;
out:
return ret;
+err_out:
+ memset(&uffdio_api, 0, sizeof(uffdio_api));
+ if (copy_to_user(buf, &uffdio_api, sizeof(uffdio_api)))
+ ret = -EFAULT;
+ goto out;
}
static long userfaultfd_ioctl(struct file *file, unsigned cmd,
--
2.20.1
From: Linus Torvalds <[email protected]>
commit b9959c7a347d6adbb558fba7e36e9fef3cba3b07 upstream.
This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.
The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected. So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.
Reported-by: [email protected]
Fixes: 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Siddharth Chandrasekaran <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/readdir.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -91,9 +91,9 @@ EXPORT_SYMBOL(iterate_dir);
*/
static int verify_dirent_name(const char *name, int len)
{
- if (WARN_ON_ONCE(!len))
+ if (!len)
return -EIO;
- if (WARN_ON_ONCE(memchr(name, '/', len)))
+ if (memchr(name, '/', len))
return -EIO;
return 0;
}
From: Taehee Yoo <[email protected]>
[ Upstream commit 6a902c0f31993ab02e1b6ea7085002b9c9083b6a ]
GTP default hashtable size is 1024 and userspace could set specific
hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0
from userspace, hashtable will not work and panic will occur.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -671,10 +671,13 @@ static int gtp_newlink(struct net *src_n
if (err < 0)
return err;
- if (!data[IFLA_GTP_PDP_HASHSIZE])
+ if (!data[IFLA_GTP_PDP_HASHSIZE]) {
hashsize = 1024;
- else
+ } else {
hashsize = nla_get_u32(data[IFLA_GTP_PDP_HASHSIZE]);
+ if (!hashsize)
+ hashsize = 1024;
+ }
err = gtp_hashtable_new(gtp, hashsize);
if (err < 0)
From: Hans de Goede <[email protected]>
[ Upstream commit 40ecab551232972a39cdd8b6f17ede54a3fdb296 ]
Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
added a spinlock around all register accesses because:
"There is a hardware issue in Intel Baytrail where concurrent GPIO register
access might result reads of 0xffffffff and writes might get dropped
completely."
Testing has shown that this does not catch all cases, there are still
2 problems remaining
1) The original fix uses a spinlock per byt_gpio device / struct,
additional testing has shown that this is not sufficient concurent
accesses to 2 different GPIO banks also suffer from the same problem.
This commit fixes this by moving to a single global lock.
2) The original fix did not add a lock around the register accesses in
the suspend/resume handling.
Since pinctrl-baytrail.c is using normal suspend/resume handlers,
interrupts are still enabled during suspend/resume handling. Nothing
should be using the GPIOs when they are being taken down, _but_ the
GPIOs themselves may still cause interrupts, which are likely to
use (read) the triggering GPIO. So we need to protect against
concurrent GPIO register accesses in the suspend/resume handlers too.
This commit fixes this by adding the missing spin_lock / unlock calls.
The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
confused after a suspend resume. The DSDT for this device has a bug
in its _LID method which reprograms the home and power button trigger-
flags requesting both high and low _level_ interrupts so the IRQs for
these 2 GPIOs continuously fire. This combined with the saving of
registers during suspend, triggers concurrent GPIO register accesses
resulting in saving 0xffffffff as pconf0 value during suspend and then
when restoring this on resume the pinmux settings get all messed up,
resulting in various I2C busses being stuck, the wifi no longer working
and often the tablet simply not coming out of suspend at all.
Cc: [email protected]
Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 81 +++++++++++++-----------
1 file changed, 44 insertions(+), 37 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index f38d596efa05..021e28ff1194 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -196,7 +196,6 @@ struct byt_gpio {
struct platform_device *pdev;
struct pinctrl_dev *pctl_dev;
struct pinctrl_desc pctl_desc;
- raw_spinlock_t lock;
const struct byt_pinctrl_soc_data *soc_data;
struct byt_community *communities_copy;
struct byt_gpio_pin_context *saved_context;
@@ -707,6 +706,8 @@ static const struct byt_pinctrl_soc_data *byt_soc_data[] = {
NULL,
};
+static DEFINE_RAW_SPINLOCK(byt_lock);
+
static struct byt_community *byt_get_community(struct byt_gpio *vg,
unsigned int pin)
{
@@ -848,7 +849,7 @@ static void byt_set_group_simple_mux(struct byt_gpio *vg,
unsigned long flags;
int i;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
for (i = 0; i < group.npins; i++) {
void __iomem *padcfg0;
@@ -868,7 +869,7 @@ static void byt_set_group_simple_mux(struct byt_gpio *vg,
writel(value, padcfg0);
}
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
}
static void byt_set_group_mixed_mux(struct byt_gpio *vg,
@@ -878,7 +879,7 @@ static void byt_set_group_mixed_mux(struct byt_gpio *vg,
unsigned long flags;
int i;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
for (i = 0; i < group.npins; i++) {
void __iomem *padcfg0;
@@ -898,7 +899,7 @@ static void byt_set_group_mixed_mux(struct byt_gpio *vg,
writel(value, padcfg0);
}
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
}
static int byt_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
@@ -947,11 +948,11 @@ static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)
unsigned long flags;
u32 value;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
value = readl(reg);
value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
writel(value, reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
}
static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
@@ -963,7 +964,7 @@ static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
u32 value, gpio_mux;
unsigned long flags;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
/*
* In most cases, func pin mux 000 means GPIO function.
@@ -985,7 +986,7 @@ static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
"pin %u forcibly re-configured as GPIO\n", offset);
}
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
pm_runtime_get(&vg->pdev->dev);
@@ -1013,7 +1014,7 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
unsigned long flags;
u32 value;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
value = readl(val_reg);
value &= ~BYT_DIR_MASK;
@@ -1030,7 +1031,7 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
"Potential Error: Setting GPIO with direct_irq_en to output");
writel(value, val_reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
return 0;
}
@@ -1099,11 +1100,11 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
u32 conf, pull, val, debounce;
u16 arg = 0;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
conf = readl(conf_reg);
pull = conf & BYT_PULL_ASSIGN_MASK;
val = readl(val_reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
@@ -1130,9 +1131,9 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
if (!(conf & BYT_DEBOUNCE_EN))
return -EINVAL;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
debounce = readl(db_reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
switch (debounce & BYT_DEBOUNCE_PULSE_MASK) {
case BYT_DEBOUNCE_PULSE_375US:
@@ -1184,7 +1185,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
u32 conf, val, debounce;
int i, ret = 0;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
conf = readl(conf_reg);
val = readl(val_reg);
@@ -1292,7 +1293,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
if (!ret)
writel(conf, conf_reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
return ret;
}
@@ -1317,9 +1318,9 @@ static int byt_gpio_get(struct gpio_chip *chip, unsigned offset)
unsigned long flags;
u32 val;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
val = readl(reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
return !!(val & BYT_LEVEL);
}
@@ -1334,13 +1335,13 @@ static void byt_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
if (!reg)
return;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
old_val = readl(reg);
if (value)
writel(old_val | BYT_LEVEL, reg);
else
writel(old_val & ~BYT_LEVEL, reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
}
static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
@@ -1353,9 +1354,9 @@ static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
if (!reg)
return -EINVAL;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
value = readl(reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
if (!(value & BYT_OUTPUT_EN))
return GPIOF_DIR_OUT;
@@ -1398,14 +1399,14 @@ static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
const char *label;
unsigned int pin;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
pin = vg->soc_data->pins[i].number;
reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG);
if (!reg) {
seq_printf(s,
"Could not retrieve pin %i conf0 reg\n",
pin);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
continue;
}
conf0 = readl(reg);
@@ -1414,11 +1415,11 @@ static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
if (!reg) {
seq_printf(s,
"Could not retrieve pin %i val reg\n", pin);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
continue;
}
val = readl(reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
comm = byt_get_community(vg, pin);
if (!comm) {
@@ -1502,9 +1503,9 @@ static void byt_irq_ack(struct irq_data *d)
if (!reg)
return;
- raw_spin_lock(&vg->lock);
+ raw_spin_lock(&byt_lock);
writel(BIT(offset % 32), reg);
- raw_spin_unlock(&vg->lock);
+ raw_spin_unlock(&byt_lock);
}
static void byt_irq_mask(struct irq_data *d)
@@ -1528,7 +1529,7 @@ static void byt_irq_unmask(struct irq_data *d)
if (!reg)
return;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
value = readl(reg);
switch (irqd_get_trigger_type(d)) {
@@ -1551,7 +1552,7 @@ static void byt_irq_unmask(struct irq_data *d)
writel(value, reg);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
}
static int byt_irq_type(struct irq_data *d, unsigned int type)
@@ -1565,7 +1566,7 @@ static int byt_irq_type(struct irq_data *d, unsigned int type)
if (!reg || offset >= vg->chip.ngpio)
return -EINVAL;
- raw_spin_lock_irqsave(&vg->lock, flags);
+ raw_spin_lock_irqsave(&byt_lock, flags);
value = readl(reg);
WARN(value & BYT_DIRECT_IRQ_EN,
@@ -1587,7 +1588,7 @@ static int byt_irq_type(struct irq_data *d, unsigned int type)
else if (type & IRQ_TYPE_LEVEL_MASK)
irq_set_handler_locked(d, handle_level_irq);
- raw_spin_unlock_irqrestore(&vg->lock, flags);
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
return 0;
}
@@ -1623,9 +1624,9 @@ static void byt_gpio_irq_handler(struct irq_desc *desc)
continue;
}
- raw_spin_lock(&vg->lock);
+ raw_spin_lock(&byt_lock);
pending = readl(reg);
- raw_spin_unlock(&vg->lock);
+ raw_spin_unlock(&byt_lock);
for_each_set_bit(pin, &pending, 32) {
virq = irq_find_mapping(vg->chip.irq.domain, base + pin);
generic_handle_irq(virq);
@@ -1828,8 +1829,6 @@ static int byt_pinctrl_probe(struct platform_device *pdev)
return PTR_ERR(vg->pctl_dev);
}
- raw_spin_lock_init(&vg->lock);
-
ret = byt_gpio_probe(vg);
if (ret)
return ret;
@@ -1845,8 +1844,11 @@ static int byt_gpio_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct byt_gpio *vg = platform_get_drvdata(pdev);
+ unsigned long flags;
int i;
+ raw_spin_lock_irqsave(&byt_lock, flags);
+
for (i = 0; i < vg->soc_data->npins; i++) {
void __iomem *reg;
u32 value;
@@ -1867,6 +1869,7 @@ static int byt_gpio_suspend(struct device *dev)
vg->saved_context[i].val = value;
}
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
return 0;
}
@@ -1874,8 +1877,11 @@ static int byt_gpio_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct byt_gpio *vg = platform_get_drvdata(pdev);
+ unsigned long flags;
int i;
+ raw_spin_lock_irqsave(&byt_lock, flags);
+
for (i = 0; i < vg->soc_data->npins; i++) {
void __iomem *reg;
u32 value;
@@ -1913,6 +1919,7 @@ static int byt_gpio_resume(struct device *dev)
}
}
+ raw_spin_unlock_irqrestore(&byt_lock, flags);
return 0;
}
#endif
--
2.20.1
From: Hangbin Liu <[email protected]>
[ Upstream commit 7a1592bcb15d71400a98632727791d1e68ea0ee8 ]
When do tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
v5: No Change.
v4: Update commit description
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Fixes: 0dec879f636f ("net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TP")
Reviewed-by: Guillaume Nault <[email protected]>
Tested-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_tunnel.c | 2 +-
net/ipv6/ip6_tunnel.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -513,7 +513,7 @@ static int tnl_update_pmtu(struct net_de
else
mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
- skb_dst_update_pmtu(skb, mtu);
+ skb_dst_update_pmtu_no_confirm(skb, mtu);
if (skb->protocol == htons(ETH_P_IP)) {
if (!skb_is_gso(skb) &&
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -645,7 +645,7 @@ ip4ip6_err(struct sk_buff *skb, struct i
if (rel_info > dst_mtu(skb_dst(skb2)))
goto out;
- skb_dst_update_pmtu(skb2, rel_info);
+ skb_dst_update_pmtu_no_confirm(skb2, rel_info);
}
icmp_send(skb2, rel_type, rel_code, htonl(rel_info));
@@ -1137,7 +1137,7 @@ route_lookup:
mtu = max(mtu, skb->protocol == htons(ETH_P_IPV6) ?
IPV6_MIN_MTU : IPV4_MIN_MTU);
- skb_dst_update_pmtu(skb, mtu);
+ skb_dst_update_pmtu_no_confirm(skb, mtu);
if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) {
*pmtu = mtu;
err = -EMSGSIZE;
From: Taehee Yoo <[email protected]>
[ Upstream commit 6b01b1d9b2d38dc84ac398bfe9f00baff06a31e5 ]
GTP RX packet path lookups pdp context with TID. If duplicate TID pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, TID value should be unique.
GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp
contexts are existing in the list, it couldn't select correct pdp context.
So, ms_addr value should be unique.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -931,24 +931,31 @@ static void ipv4_pdp_fill(struct pdp_ctx
}
}
-static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
- struct genl_info *info)
+static int gtp_pdp_add(struct gtp_dev *gtp, struct sock *sk,
+ struct genl_info *info)
{
+ struct pdp_ctx *pctx, *pctx_tid = NULL;
struct net_device *dev = gtp->dev;
u32 hash_ms, hash_tid = 0;
- struct pdp_ctx *pctx;
+ unsigned int version;
bool found = false;
__be32 ms_addr;
ms_addr = nla_get_be32(info->attrs[GTPA_MS_ADDRESS]);
hash_ms = ipv4_hashfn(ms_addr) % gtp->hash_size;
+ version = nla_get_u32(info->attrs[GTPA_VERSION]);
- hlist_for_each_entry_rcu(pctx, >p->addr_hash[hash_ms], hlist_addr) {
- if (pctx->ms_addr_ip4.s_addr == ms_addr) {
- found = true;
- break;
- }
- }
+ pctx = ipv4_pdp_find(gtp, ms_addr);
+ if (pctx)
+ found = true;
+ if (version == GTP_V0)
+ pctx_tid = gtp0_pdp_find(gtp,
+ nla_get_u64(info->attrs[GTPA_TID]));
+ else if (version == GTP_V1)
+ pctx_tid = gtp1_pdp_find(gtp,
+ nla_get_u32(info->attrs[GTPA_I_TEI]));
+ if (pctx_tid)
+ found = true;
if (found) {
if (info->nlhdr->nlmsg_flags & NLM_F_EXCL)
@@ -956,6 +963,11 @@ static int ipv4_pdp_add(struct gtp_dev *
if (info->nlhdr->nlmsg_flags & NLM_F_REPLACE)
return -EOPNOTSUPP;
+ if (pctx && pctx_tid)
+ return -EEXIST;
+ if (!pctx)
+ pctx = pctx_tid;
+
ipv4_pdp_fill(pctx, info);
if (pctx->gtp_version == GTP_V0)
@@ -1079,7 +1091,7 @@ static int gtp_genl_new_pdp(struct sk_bu
goto out_unlock;
}
- err = ipv4_pdp_add(gtp, sk, info);
+ err = gtp_pdp_add(gtp, sk, info);
out_unlock:
rcu_read_unlock();
From: Hangbin Liu <[email protected]>
[ Upstream commit 4d42df46d6372ece4cb4279870b46c2ea7304a47 ]
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -943,7 +943,7 @@ static netdev_tx_t ipip6_tunnel_xmit(str
}
if (tunnel->parms.iph.daddr)
- skb_dst_update_pmtu(skb, mtu);
+ skb_dst_update_pmtu_no_confirm(skb, mtu);
if (skb->len > mtu && !skb_is_gso(skb)) {
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
From: Mattias Jacobsson <[email protected]>
commit 099be748865eece21362aee416c350c0b1ae34df upstream.
Each call to va_copy() should have one, and only one, corresponding call
to va_end(). In strbuf_addv() some code paths result in va_end() getting
called multiple times. Remove the superfluous va_end().
Signed-off-by: Mattias Jacobsson <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sanskriti Sharma <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ce49d8436cff ("perf strbuf: Match va_{add,copy} with va_end")
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/strbuf.c | 1 -
1 file changed, 1 deletion(-)
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -109,7 +109,6 @@ static int strbuf_addv(struct strbuf *sb
return ret;
}
len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap_saved);
- va_end(ap_saved);
if (len > strbuf_avail(sb)) {
pr_debug("this should not happen, your vsnprintf is broken");
va_end(ap_saved);
From: Mahesh Bandewar <[email protected]>
[ Upstream commit 5d485ed88d48f8101a2067348e267c0aaf4ed486 ]
After the recent fix in commit 1899bb325149 ("bonding: fix state
transition issue in link monitoring"), the active-backup mode with
miimon initially come-up fine but after a link-failure, both members
transition into backup state.
Following steps to reproduce the scenario (eth1 and eth2 are the
slaves of the bond):
ip link set eth1 up
ip link set eth2 down
sleep 1
ip link set eth2 up
ip link set eth1 down
cat /sys/class/net/eth1/bonding_slave/state
cat /sys/class/net/eth2/bonding_slave/state
Fixes: 1899bb325149 ("bonding: fix state transition issue in link monitoring")
CC: Jay Vosburgh <[email protected]>
Signed-off-by: Mahesh Bandewar <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9b8143dca512..f57b86f1373d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2223,9 +2223,6 @@ static void bond_miimon_commit(struct bonding *bond)
} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* make it immediately active */
bond_set_active_slave(slave);
- } else if (slave != primary) {
- /* prevent it from being the active one */
- bond_set_backup_slave(slave);
}
netdev_info(bond->dev, "link status definitely up for interface %s, %u Mbps %s duplex\n",
--
2.20.1
From: Hangbin Liu <[email protected]>
[ Upstream commit bd085ef678b2cc8c38c105673dfe8ff8f5ec0c57 ]
The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.
But for tunnel code, it will call pmtu before xmit, like:
- tnl_update_pmtu()
- skb_dst_update_pmtu()
- ip6_rt_update_pmtu()
- __ip6_rt_update_pmtu()
- dst_confirm_neigh()
If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.
So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.
On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.
To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Suggested-by: David Miller <[email protected]>
Reviewed-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 2 +-
include/net/dst.h | 2 +-
include/net/dst_ops.h | 3 ++-
net/bridge/br_nf_core.c | 3 ++-
net/decnet/dn_route.c | 6 ++++--
net/ipv4/inet_connection_sock.c | 2 +-
net/ipv4/route.c | 9 ++++++---
net/ipv4/xfrm4_policy.c | 5 +++--
net/ipv6/inet6_connection_sock.c | 2 +-
net/ipv6/ip6_gre.c | 2 +-
net/ipv6/route.c | 22 +++++++++++++++-------
net/ipv6/xfrm6_policy.c | 5 +++--
net/netfilter/ipvs/ip_vs_xmit.c | 2 +-
net/sctp/transport.c | 2 +-
14 files changed, 42 insertions(+), 25 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -545,7 +545,7 @@ static int gtp_build_skb_ip4(struct sk_b
mtu = dst_mtu(&rt->dst);
}
- rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu);
+ rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, true);
if (!skb_is_gso(skb) && (iph->frag_off & htons(IP_DF)) &&
mtu < ntohs(iph->tot_len)) {
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -527,7 +527,7 @@ static inline void skb_dst_update_pmtu(s
struct dst_entry *dst = skb_dst(skb);
if (dst && dst->ops->update_pmtu)
- dst->ops->update_pmtu(dst, NULL, skb, mtu);
+ dst->ops->update_pmtu(dst, NULL, skb, mtu, true);
}
static inline void skb_tunnel_check_pmtu(struct sk_buff *skb,
--- a/include/net/dst_ops.h
+++ b/include/net/dst_ops.h
@@ -27,7 +27,8 @@ struct dst_ops {
struct dst_entry * (*negative_advice)(struct dst_entry *);
void (*link_failure)(struct sk_buff *);
void (*update_pmtu)(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu);
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh);
void (*redirect)(struct dst_entry *dst, struct sock *sk,
struct sk_buff *skb);
int (*local_out)(struct net *net, struct sock *sk, struct sk_buff *skb);
--- a/net/bridge/br_nf_core.c
+++ b/net/bridge/br_nf_core.c
@@ -26,7 +26,8 @@
#endif
static void fake_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
}
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -118,7 +118,8 @@ static void dn_dst_ifdown(struct dst_ent
static struct dst_entry *dn_dst_negative_advice(struct dst_entry *);
static void dn_dst_link_failure(struct sk_buff *);
static void dn_dst_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb , u32 mtu);
+ struct sk_buff *skb , u32 mtu,
+ bool confirm_neigh);
static void dn_dst_redirect(struct dst_entry *dst, struct sock *sk,
struct sk_buff *skb);
static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst,
@@ -259,7 +260,8 @@ static int dn_dst_gc(struct dst_ops *ops
* advertise to the other end).
*/
static void dn_dst_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
struct dn_route *rt = (struct dn_route *) dst;
struct neighbour *n = rt->n;
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -1089,7 +1089,7 @@ struct dst_entry *inet_csk_update_pmtu(s
if (!dst)
goto out;
}
- dst->ops->update_pmtu(dst, sk, NULL, mtu);
+ dst->ops->update_pmtu(dst, sk, NULL, mtu, true);
dst = __sk_dst_check(sk, 0);
if (!dst)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -142,7 +142,8 @@ static unsigned int ipv4_mtu(const stru
static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst);
static void ipv4_link_failure(struct sk_buff *skb);
static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu);
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh);
static void ip_do_redirect(struct dst_entry *dst, struct sock *sk,
struct sk_buff *skb);
static void ipv4_dst_destroy(struct dst_entry *dst);
@@ -1035,7 +1036,8 @@ static void __ip_rt_update_pmtu(struct r
}
static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
struct rtable *rt = (struct rtable *) dst;
struct flowi4 fl4;
@@ -2559,7 +2561,8 @@ static unsigned int ipv4_blackhole_mtu(c
}
static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
}
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -222,12 +222,13 @@ _decode_session4(struct sk_buff *skb, st
}
static void xfrm4_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
struct dst_entry *path = xdst->route;
- path->ops->update_pmtu(path, sk, skb, mtu);
+ path->ops->update_pmtu(path, sk, skb, mtu, confirm_neigh);
}
static void xfrm4_redirect(struct dst_entry *dst, struct sock *sk,
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -150,7 +150,7 @@ struct dst_entry *inet6_csk_update_pmtu(
if (IS_ERR(dst))
return NULL;
- dst->ops->update_pmtu(dst, sk, NULL, mtu);
+ dst->ops->update_pmtu(dst, sk, NULL, mtu, true);
dst = inet6_csk_route_socket(sk, &fl6);
return IS_ERR(dst) ? NULL : dst;
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1060,7 +1060,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit
/* TooBig packet may have updated dst->dev's mtu */
if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu)
- dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu);
+ dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu, true);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
NEXTHDR_GRE);
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -99,7 +99,8 @@ static int ip6_pkt_prohibit(struct sk_b
static int ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
static void ip6_link_failure(struct sk_buff *skb);
static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu);
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh);
static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk,
struct sk_buff *skb);
static int rt6_score_route(struct fib6_info *rt, int oif, int strict);
@@ -266,7 +267,8 @@ static unsigned int ip6_blackhole_mtu(co
}
static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
}
@@ -2352,7 +2354,8 @@ static bool rt6_cache_allowed_for_pmtu(c
}
static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk,
- const struct ipv6hdr *iph, u32 mtu)
+ const struct ipv6hdr *iph, u32 mtu,
+ bool confirm_neigh)
{
const struct in6_addr *daddr, *saddr;
struct rt6_info *rt6 = (struct rt6_info *)dst;
@@ -2370,7 +2373,10 @@ static void __ip6_rt_update_pmtu(struct
daddr = NULL;
saddr = NULL;
}
- dst_confirm_neigh(dst, daddr);
+
+ if (confirm_neigh)
+ dst_confirm_neigh(dst, daddr);
+
mtu = max_t(u32, mtu, IPV6_MIN_MTU);
if (mtu >= dst_mtu(dst))
return;
@@ -2401,9 +2407,11 @@ static void __ip6_rt_update_pmtu(struct
}
static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
- __ip6_rt_update_pmtu(dst, sk, skb ? ipv6_hdr(skb) : NULL, mtu);
+ __ip6_rt_update_pmtu(dst, sk, skb ? ipv6_hdr(skb) : NULL, mtu,
+ confirm_neigh);
}
void ip6_update_pmtu(struct sk_buff *skb, struct net *net, __be32 mtu,
@@ -2423,7 +2431,7 @@ void ip6_update_pmtu(struct sk_buff *skb
dst = ip6_route_output(net, NULL, &fl6);
if (!dst->error)
- __ip6_rt_update_pmtu(dst, NULL, iph, ntohl(mtu));
+ __ip6_rt_update_pmtu(dst, NULL, iph, ntohl(mtu), true);
dst_release(dst);
}
EXPORT_SYMBOL_GPL(ip6_update_pmtu);
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -221,12 +221,13 @@ _decode_session6(struct sk_buff *skb, st
}
static void xfrm6_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu)
+ struct sk_buff *skb, u32 mtu,
+ bool confirm_neigh)
{
struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
struct dst_entry *path = xdst->route;
- path->ops->update_pmtu(path, sk, skb, mtu);
+ path->ops->update_pmtu(path, sk, skb, mtu, confirm_neigh);
}
static void xfrm6_redirect(struct dst_entry *dst, struct sock *sk,
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -209,7 +209,7 @@ static inline void maybe_update_pmtu(int
struct rtable *ort = skb_rtable(skb);
if (!skb->dev && sk && sk_fullsock(sk))
- ort->dst.ops->update_pmtu(&ort->dst, sk, NULL, mtu);
+ ort->dst.ops->update_pmtu(&ort->dst, sk, NULL, mtu, true);
}
static inline bool ensure_mtu_is_adequate(struct netns_ipvs *ipvs, int skb_af,
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -278,7 +278,7 @@ bool sctp_transport_update_pmtu(struct s
pf->af->from_sk(&addr, sk);
pf->to_sk_daddr(&t->ipaddr, sk);
- dst->ops->update_pmtu(dst, sk, NULL, pmtu);
+ dst->ops->update_pmtu(dst, sk, NULL, pmtu, true);
pf->to_sk_daddr(&addr, sk);
dst = sctp_transport_dst_check(t);
From: Stefano Garzarella <[email protected]>
[ Upstream commit 8a3cc29c316c17de590e3ff8b59f3d6cbfd37b0a ]
When we receive a new packet from the guest, we check if the
src_cid is correct, but we forgot to check the dst_cid.
The host should accept only packets where dst_cid is
equal to the host CID.
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/vsock.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -436,7 +436,9 @@ static void vhost_vsock_handle_tx_kick(s
virtio_transport_deliver_tap_pkt(pkt);
/* Only accept correctly addressed packets */
- if (le64_to_cpu(pkt->hdr.src_cid) == vsock->guest_cid)
+ if (le64_to_cpu(pkt->hdr.src_cid) == vsock->guest_cid &&
+ le64_to_cpu(pkt->hdr.dst_cid) ==
+ vhost_transport_get_local_cid())
virtio_transport_recv_pkt(pkt);
else
virtio_transport_free_pkt(pkt);
From: Antonio Messina <[email protected]>
[ Upstream commit feed8a4fc9d46c3126fb9fcae0e9248270c6321a ]
When the size of the receive buffer for a socket is close to 2^31 when
computing if we have enough space in the buffer to copy a packet from
the queue to the buffer we might hit an integer overflow.
When an user set net.core.rmem_default to a value close to 2^31 UDP
packets are dropped because of this overflow. This can be visible, for
instance, with failure to resolve hostnames.
This can be fixed by casting sk_rcvbuf (which is an int) to unsigned
int, similarly to how it is done in TCP.
Signed-off-by: Antonio Messina <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/udp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1412,7 +1412,7 @@ int __udp_enqueue_schedule_skb(struct so
* queue contains some other skb
*/
rmem = atomic_add_return(size, &sk->sk_rmem_alloc);
- if (rmem > (size + sk->sk_rcvbuf))
+ if (rmem > (size + (unsigned int)sk->sk_rcvbuf))
goto uncharge_drop;
spin_lock(&list->lock);
From: Jan H. Schönherr <[email protected]>
[ Upstream commit a3a57ddad061acc90bef39635caf2b2330ce8f21 ]
The function mce_severity_amd_smca() requires m->bank to be initialized
for correct operation. Fix the one case, where mce_severity() is called
without doing so.
Fixes: 6bda529ec42e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems")
Fixes: d28af26faa0b ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()")
Signed-off-by: Jan H. Schönherr <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: linux-edac <[email protected]>
Cc: <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yazen Ghannam <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mcheck/mce.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 87ed8462a5c7..1f69b12d5bb8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -812,8 +812,8 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
if (quirk_no_way_out)
quirk_no_way_out(i, m, regs);
+ m->bank = i;
if (mce_severity(m, mca_cfg.tolerant, &tmp, true) >= MCE_PANIC_SEVERITY) {
- m->bank = i;
mce_read_aux(m, i);
*msg = tmp;
return 1;
--
2.20.1
From: Eric Dumazet <[email protected]>
commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream.
syzbot reported various data-race caused by hrtimer_is_queued() reading
timer->state. A READ_ONCE() is required there to silence the warning.
Also add the corresponding WRITE_ONCE() when timer->state is set.
In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid
loading timer->state twice.
KCSAN reported these cases:
BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check
write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0:
__remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
__run_hrtimer kernel/time/hrtimer.c:1496 [inline]
__hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
__do_softirq+0x115/0x33f kernel/softirq.c:292
run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1:
tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline]
tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225
tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044
tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558
tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717
tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
sk_backlog_rcv include/net/sock.h:945 [inline]
__release_sock+0x135/0x1e0 net/core/sock.c:2435
release_sock+0x61/0x160 net/core/sock.c:2951
sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0x9f/0xc0 net/socket.c:657
BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check
write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0:
__remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
__run_hrtimer kernel/time/hrtimer.c:1496 [inline]
__hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1:
__tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265
tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline]
tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708
tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
sk_backlog_rcv include/net/sock.h:945 [inline]
__release_sock+0x135/0x1e0 net/core/sock.c:2435
release_sock+0x61/0x160 net/core/sock.c:2951
sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0x9f/0xc0 net/socket.c:657
__sys_sendto+0x21f/0x320 net/socket.c:1952
__do_sys_sendto net/socket.c:1964 [inline]
__se_sys_sendto net/socket.c:1960 [inline]
__x64_sys_sendto+0x89/0xb0 net/socket.c:1960
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ tglx: Added comments ]
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/hrtimer.h | 14 ++++++++++----
kernel/time/hrtimer.c | 11 +++++++----
2 files changed, 17 insertions(+), 8 deletions(-)
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -430,12 +430,18 @@ extern u64 hrtimer_next_event_without(co
extern bool hrtimer_active(const struct hrtimer *timer);
-/*
- * Helper function to check, whether the timer is on one of the queues
+/**
+ * hrtimer_is_queued = check, whether the timer is on one of the queues
+ * @timer: Timer to check
+ *
+ * Returns: True if the timer is queued, false otherwise
+ *
+ * The function can be used lockless, but it gives only a current snapshot.
*/
-static inline int hrtimer_is_queued(struct hrtimer *timer)
+static inline bool hrtimer_is_queued(struct hrtimer *timer)
{
- return timer->state & HRTIMER_STATE_ENQUEUED;
+ /* The READ_ONCE pairs with the update functions of timer->state */
+ return !!(READ_ONCE(timer->state) & HRTIMER_STATE_ENQUEUED);
}
/*
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -955,7 +955,8 @@ static int enqueue_hrtimer(struct hrtime
base->cpu_base->active_bases |= 1 << base->index;
- timer->state = HRTIMER_STATE_ENQUEUED;
+ /* Pairs with the lockless read in hrtimer_is_queued() */
+ WRITE_ONCE(timer->state, HRTIMER_STATE_ENQUEUED);
return timerqueue_add(&base->active, &timer->node);
}
@@ -977,7 +978,8 @@ static void __remove_hrtimer(struct hrti
struct hrtimer_cpu_base *cpu_base = base->cpu_base;
u8 state = timer->state;
- timer->state = newstate;
+ /* Pairs with the lockless read in hrtimer_is_queued() */
+ WRITE_ONCE(timer->state, newstate);
if (!(state & HRTIMER_STATE_ENQUEUED))
return;
@@ -1002,8 +1004,9 @@ static void __remove_hrtimer(struct hrti
static inline int
remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart)
{
- if (hrtimer_is_queued(timer)) {
- u8 state = timer->state;
+ u8 state = timer->state;
+
+ if (state & HRTIMER_STATE_ENQUEUED) {
int reprogram;
/*
From: Eric Dumazet <[email protected]>
[ Upstream commit 1f85e6267caca44b30c54711652b0726fadbb131 ]
Backport of commit fdfc5c8594c2 ("tcp: remove empty skb from
write queue in error cases") in linux-4.14 stable triggered
various bugs. One of them has been fixed in commit ba2ddb43f270
("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but
we still have crashes in some occasions.
Root-cause is that when tcp_sendmsg() has allocated a fresh
skb and could not append a fragment before being blocked
in sk_stream_wait_memory(), tcp_write_xmit() might be called
and decide to send this fresh and empty skb.
Sending an empty packet is not only silly, it might have caused
many issues we had in the past with tp->packets_out being
out of sync.
Fixes: c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Christoph Paasch <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Cc: Jason Baron <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_output.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2376,6 +2376,14 @@ static bool tcp_write_xmit(struct sock *
if (tcp_small_queue_check(sk, skb, 0))
break;
+ /* Argh, we hit an empty skb(), presumably a thread
+ * is sleeping in sendmsg()/sk_stream_wait_memory().
+ * We do not want to send a pure-ack packet and have
+ * a strange looking rtx queue with empty packet(s).
+ */
+ if (TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq)
+ break;
+
if (unlikely(tcp_transmit_skb(sk, skb, 1, gfp)))
break;
From: Florian Westphal <[email protected]>
commit e608f631f0ba5f1fc5ee2e260a3a35d13107cbfe upstream.
syzbot reported following splat:
BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
Read of size 4 at addr ffffc900004461f4 by task syz-executor267/7937
CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0
size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249
compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333
[..]
Because padding isn't considered during computation of ->buf_user_offset,
"total" is decremented by fewer bytes than it should.
Therefore, the first part of
if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry))
will pass, -- it should not have. This causes oob access:
entry->next_offset is past the vmalloced size.
Reject padding and check that computed user offset (sum of ebt_entry
structure plus all individual matches/watchers/targets) is same
value that userspace gave us as the offset of the next entry.
Reported-by: [email protected]
Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/netfilter/ebtables.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1876,7 +1876,7 @@ static int ebt_buf_count(struct ebt_entr
}
static int ebt_buf_add(struct ebt_entries_buf_state *state,
- void *data, unsigned int sz)
+ const void *data, unsigned int sz)
{
if (state->buf_kern_start == NULL)
goto count_only;
@@ -1910,7 +1910,7 @@ enum compat_mwt {
EBT_COMPAT_TARGET,
};
-static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt,
+static int compat_mtw_from_user(const struct compat_ebt_entry_mwt *mwt,
enum compat_mwt compat_mwt,
struct ebt_entries_buf_state *state,
const unsigned char *base)
@@ -1988,22 +1988,23 @@ static int compat_mtw_from_user(struct c
/* return size of all matches, watchers or target, including necessary
* alignment and padding.
*/
-static int ebt_size_mwt(struct compat_ebt_entry_mwt *match32,
+static int ebt_size_mwt(const struct compat_ebt_entry_mwt *match32,
unsigned int size_left, enum compat_mwt type,
struct ebt_entries_buf_state *state, const void *base)
{
+ const char *buf = (const char *)match32;
int growth = 0;
- char *buf;
if (size_left == 0)
return 0;
- buf = (char *) match32;
-
- while (size_left >= sizeof(*match32)) {
+ do {
struct ebt_entry_match *match_kern;
int ret;
+ if (size_left < sizeof(*match32))
+ return -EINVAL;
+
match_kern = (struct ebt_entry_match *) state->buf_kern_start;
if (match_kern) {
char *tmp;
@@ -2040,22 +2041,18 @@ static int ebt_size_mwt(struct compat_eb
if (match_kern)
match_kern->match_size = ret;
- /* rule should have no remaining data after target */
- if (type == EBT_COMPAT_TARGET && size_left)
- return -EINVAL;
-
match32 = (struct compat_ebt_entry_mwt *) buf;
- }
+ } while (size_left);
return growth;
}
/* called for all ebt_entry structures. */
-static int size_entry_mwt(struct ebt_entry *entry, const unsigned char *base,
+static int size_entry_mwt(const struct ebt_entry *entry, const unsigned char *base,
unsigned int *total,
struct ebt_entries_buf_state *state)
{
- unsigned int i, j, startoff, new_offset = 0;
+ unsigned int i, j, startoff, next_expected_off, new_offset = 0;
/* stores match/watchers/targets & offset of next struct ebt_entry: */
unsigned int offsets[4];
unsigned int *offsets_update = NULL;
@@ -2141,11 +2138,13 @@ static int size_entry_mwt(struct ebt_ent
return ret;
}
- startoff = state->buf_user_offset - startoff;
+ next_expected_off = state->buf_user_offset - startoff;
+ if (next_expected_off != entry->next_offset)
+ return -EINVAL;
- if (WARN_ON(*total < startoff))
+ if (*total < entry->next_offset)
return -EINVAL;
- *total -= startoff;
+ *total -= entry->next_offset;
return 0;
}
From: Russell King <[email protected]>
[ Upstream commit f3f2364ea14d1cf6bf966542f31eadcf178f1577 ]
phylink requires the MAC to report when its link status changes when
operating in inband modes. Failure to report link status changes
means that phylink has no idea when the link events happen, which
results in either the network interface's carrier remaining up or
remaining permanently down.
For example, with a fiber module, if the interface is brought up and
link is initially established, taking the link down at the far end
will cut the optical power. The SFP module's LOS asserts, we
deactivate the link, and the network interface reports no carrier.
When the far end is brought back up, the SFP module's LOS deasserts,
but the MAC may be slower to establish link. If this happens (which
in my tests is a certainty) then phylink never hears that the MAC
has established link with the far end, and the network interface is
stuck reporting no carrier. This means the interface is
non-functional.
Avoiding the link interrupt when we have phylink is basically not
an option, so remove the !port->phylink from the test.
Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Tested-by: Sven Auhagen <[email protected]>
Tested-by: Antoine Tenart <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -3341,7 +3341,7 @@ static int mvpp2_open(struct net_device
valid = true;
}
- if (priv->hw_version == MVPP22 && port->link_irq && !port->phylink) {
+ if (priv->hw_version == MVPP22 && port->link_irq) {
err = request_irq(port->link_irq, mvpp2_link_status_isr, 0,
dev->name, port);
if (err) {
From: Finn Thain <[email protected]>
[ Upstream commit 0b7a223552d455bcfba6fb9cfc5eef2b5fce1491 ]
Add a module parameter to inhibit disconnect/reselect for individual
targets. This gains compatibility with Aztec PowerMonster SCSI/SATA
adapters with buggy firmware. (No fix is available from the vendor.)
Apparently these adapters pass-through the product/vendor of the attached
SATA device. Since they can't be identified from the response to an INQUIRY
command, a device blacklist flag won't work.
Cc: Michael Schmitz <[email protected]>
Link: https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.au
Reviewed-and-tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 8ec68dcc0cc4..95a3e3bf2b43 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -129,6 +129,9 @@
#define NCR5380_release_dma_irq(x)
#endif
+static unsigned int disconnect_mask = ~0;
+module_param(disconnect_mask, int, 0444);
+
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
static void bus_reset_cleanup(struct Scsi_Host *);
@@ -946,7 +949,8 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
int err;
bool ret = true;
bool can_disconnect = instance->irq != NO_IRQ &&
- cmd->cmnd[0] != REQUEST_SENSE;
+ cmd->cmnd[0] != REQUEST_SENSE &&
+ (disconnect_mask & BIT(scmd_id(cmd)));
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
--
2.20.1
From: Diego Elio Pettenò <[email protected]>
[ Upstream commit 366ba7c71ef77c08d06b18ad61b26e2df7352338 ]
Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)
Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.
To: Jens Axboe <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Diego Elio Pettenò <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cdrom/cdrom.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 933268b8d6a5..d3947388a3ef 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -996,6 +996,12 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype *tracks)
tracks->xa = 0;
tracks->error = 0;
cd_dbg(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n");
+
+ if (!CDROM_CAN(CDC_PLAY_AUDIO)) {
+ tracks->error = CDS_NO_INFO;
+ return;
+ }
+
/* Grab the TOC header so we can see how many tracks there are */
ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header);
if (ret) {
@@ -1162,7 +1168,8 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
ret = open_for_data(cdi);
if (ret)
goto err;
- cdrom_mmc3_profile(cdi);
+ if (CDROM_CAN(CDC_GENERIC_PACKET))
+ cdrom_mmc3_profile(cdi);
if (mode & FMODE_WRITE) {
ret = -EROFS;
if (cdrom_open_write(cdi))
@@ -2882,6 +2889,9 @@ int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written)
it doesn't give enough information or fails. then we return
the toc contents. */
use_toc:
+ if (!CDROM_CAN(CDC_PLAY_AUDIO))
+ return -ENOSYS;
+
toc.cdte_format = CDROM_MSF;
toc.cdte_track = CDROM_LEADOUT;
if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCENTRY, &toc)))
--
2.20.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 21915eca088dc271c970e8351290e83d938114ac ]
build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.
This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:
[Before the fix]
LEAK SUMMARY:
definitely lost: 53,184 bytes in 2,874 blocks
[After the fix]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/kallsyms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 31ed7f3f0e15..4b2711c23f4e 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -491,6 +491,8 @@ static void build_initial_tok_table(void)
table[pos] = table[i];
learn_symbol(table[pos].sym, table[pos].len);
pos++;
+ } else {
+ free(table[i].sym);
}
}
table_cnt = pos;
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 465bfd9c44dea6b55962b5788a23ac87a467c923 ]
When building pseries_defconfig, building vdso32 errors out:
error: unknown target ABI 'elfv1'
This happens because -m32 in clang changes the target to 32-bit,
which does not allow the ABI to be changed.
Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a
powerpc64le toolchain") added these flags to fix building big endian
kernels with a little endian GCC.
Clang doesn't need -mabi because the target triple controls the
default value. -mlittle-endian and -mbig-endian manipulate the triple
into either powerpc64-* or powerpc64le-*, which properly sets the
default ABI.
Adding a debug print out in the PPC64TargetInfo constructor after line
383 above shows this:
$ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null -
Default ABI: elfv1
$ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null -
Default ABI: elfv2
$ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null -
Default ABI: elfv1
$ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null -
Default ABI: elfv2
Don't specify -mabi when building with clang to avoid the build error
with -m32 and not change any code generation.
-mcall-aixdesc is not an implemented flag in clang so it can be safely
excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc
specific options on clang").
pseries_defconfig successfully builds after this patch and
powernv_defconfig and ppc44x_defconfig don't regress.
Reviewed-by: Daniel Axtens <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
[mpe: Trim clang links in change log]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/Makefile | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index dfcb698ec8f3..e43321f46a3b 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -90,11 +90,13 @@ MULTIPLEWORD := -mmultiple
endif
ifdef CONFIG_PPC64
+ifndef CONFIG_CC_IS_CLANG
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1)
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mcall-aixdesc)
aflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1)
aflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mabi=elfv2
endif
+endif
ifneq ($(cc-name),clang)
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mno-strict-align
@@ -134,6 +136,7 @@ endif
endif
CFLAGS-$(CONFIG_PPC64) := $(call cc-option,-mtraceback=no)
+ifndef CONFIG_CC_IS_CLANG
ifdef CONFIG_CPU_LITTLE_ENDIAN
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc))
AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2)
@@ -142,6 +145,7 @@ CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcall-aixdesc)
AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
endif
+endif
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,$(call cc-option,-mminimal-toc))
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
--
2.20.1
From: Eric Dumazet <[email protected]>
commit f8cc62ca3e660ae3fdaee533b1d554297cd2ae82 upstream.
skb_peek_tail() can be used without protection of a lock,
as spotted by KCSAN [1]
In order to avoid load-stearing, add a READ_ONCE()
Note that the corresponding WRITE_ONCE() are already there.
[1]
BUG: KCSAN: data-race in sk_wait_data / skb_queue_tail
read to 0xffff8880b36a4118 of 8 bytes by task 20426 on cpu 1:
skb_peek_tail include/linux/skbuff.h:1784 [inline]
sk_wait_data+0x15b/0x250 net/core/sock.c:2477
kcm_wait_data+0x112/0x1f0 net/kcm/kcmsock.c:1103
kcm_recvmsg+0xac/0x320 net/kcm/kcmsock.c:1130
sock_recvmsg_nosec net/socket.c:871 [inline]
sock_recvmsg net/socket.c:889 [inline]
sock_recvmsg+0x92/0xb0 net/socket.c:885
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
write to 0xffff8880b36a4118 of 8 bytes by task 451 on cpu 0:
__skb_insert include/linux/skbuff.h:1852 [inline]
__skb_queue_before include/linux/skbuff.h:1958 [inline]
__skb_queue_tail include/linux/skbuff.h:1991 [inline]
skb_queue_tail+0x7e/0xc0 net/core/skbuff.c:3145
kcm_queue_rcv_skb+0x202/0x310 net/kcm/kcmsock.c:206
kcm_rcv_strparser+0x74/0x4b0 net/kcm/kcmsock.c:370
__strp_recv+0x348/0xf50 net/strparser/strparser.c:309
strp_recv+0x84/0xa0 net/strparser/strparser.c:343
tcp_read_sock+0x174/0x5c0 net/ipv4/tcp.c:1639
strp_read_sock+0xd4/0x140 net/strparser/strparser.c:366
do_strp_work net/strparser/strparser.c:414 [inline]
strp_work+0x9a/0xe0 net/strparser/strparser.c:423
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 451 Comm: kworker/u4:3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kstrp strp_work
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/skbuff.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1669,7 +1669,7 @@ static inline struct sk_buff *skb_peek_n
*/
static inline struct sk_buff *skb_peek_tail(const struct sk_buff_head *list_)
{
- struct sk_buff *skb = list_->prev;
+ struct sk_buff *skb = READ_ONCE(list_->prev);
if (skb == (struct sk_buff *)list_)
skb = NULL;
@@ -1737,7 +1737,9 @@ static inline void __skb_insert(struct s
struct sk_buff *prev, struct sk_buff *next,
struct sk_buff_head *list)
{
- /* see skb_queue_empty_lockless() for the opposite READ_ONCE() */
+ /* See skb_queue_empty_lockless() and skb_peek_tail()
+ * for the opposite READ_ONCE()
+ */
WRITE_ONCE(newsk->next, next);
WRITE_ONCE(newsk->prev, prev);
WRITE_ONCE(next->prev, newsk);
From: Qian Cai <[email protected]>
[ Upstream commit 4e24e37d5313edca8b4ab86f240c046c731e28d6 ]
drivers/nvdimm/btt.c: In function 'btt_read_pg':
drivers/nvdimm/btt.c:1264:8: warning: variable 'rc' set but not used
[-Wunused-but-set-variable]
int rc;
^~
Add a ratelimited message in case a storm of errors is encountered.
Fixes: d9b83c756953 ("libnvdimm, btt: rework error clearing")
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/btt.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
index 0360c015f658..75ae2c508a04 100644
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1260,11 +1260,11 @@ static int btt_read_pg(struct btt *btt, struct bio_integrity_payload *bip,
ret = btt_data_read(arena, page, off, postmap, cur_len);
if (ret) {
- int rc;
-
/* Media error - set the e_flag */
- rc = btt_map_write(arena, premap, postmap, 0, 1,
- NVDIMM_IO_ATOMIC);
+ if (btt_map_write(arena, premap, postmap, 0, 1, NVDIMM_IO_ATOMIC))
+ dev_warn_ratelimited(to_dev(arena),
+ "Error persistently tracking bad blocks at %#x\n",
+ premap);
goto out_rtt;
}
--
2.20.1
From: Tyrel Datwyler <[email protected]>
[ Upstream commit 4f9f2d3d7a434b7f882b72550194c9278f4a3925 ]
The newer ibm,drc-info property is a condensed description of the old
ibm,drc-* properties (ie. names, types, indexes, and power-domains).
When matching a drc-index to a drc-name we need to verify that the
index is within the start and last drc-index range and map it to a
drc-name using the drc-name-prefix and logical index.
Fix the mapping by checking that the index is within the range of the
current drc-info entry, and build the name from the drc-name-prefix
concatenated with the starting drc-name-suffix value and the sequential
index obtained by subtracting ibm,my-drc-index from this entries
drc-start-index.
Signed-off-by: Tyrel Datwyler <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/hotplug/rpaphp_core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 7d74fe875225..a306cad70470 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -248,9 +248,10 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
/* Should now know end of current entry */
/* Found it */
- if (my_index <= drc.last_drc_index) {
+ if (my_index >= drc.drc_index_start && my_index <= drc.last_drc_index) {
+ int index = my_index - drc.drc_index_start;
sprintf(cell_drc_name, "%s%d", drc.drc_name_prefix,
- my_index);
+ drc.drc_name_suffix_start + index);
break;
}
}
--
2.20.1
From: Ding Xiang <[email protected]>
[ Upstream commit 188c523e1c271d537f3c9f55b6b65bf4476de32f ]
Fix a static code checker warning:
fs/ocfs2/acl.c:331
ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR'
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 5ee0fbd50fd ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang")
Signed-off-by: Ding Xiang <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/acl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index 917fadca8a7b..b73b78771915 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -335,8 +335,8 @@ int ocfs2_acl_chmod(struct inode *inode, struct buffer_head *bh)
down_read(&OCFS2_I(inode)->ip_xattr_sem);
acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh);
up_read(&OCFS2_I(inode)->ip_xattr_sem);
- if (IS_ERR(acl) || !acl)
- return PTR_ERR(acl);
+ if (IS_ERR_OR_NULL(acl))
+ return PTR_ERR_OR_ZERO(acl);
ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode);
if (ret)
return ret;
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit 2a60637f06ac94869b2e630eaf837110d39bf291 ]
As Eric reported:
RENAME_EXCHANGE support was just added to fsstress in xfstests:
commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06
Author: kaixuxia <[email protected]>
Date: Thu Oct 31 14:41:48 2019 +0800
fsstress: add EXCHANGE renameat2 support
This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors.
I'm not sure what the problem is, but it still happens even with all the
fs-verity stuff in the test commented out, so that the test just runs fsstress.
generic/579 23s ... [10:02:25]
[ 7.745370] run fstests generic/579 at 2019-11-04 10:02:25
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
(see /results/f2fs/results-default/generic/579.full for details)
[10:02:47]
Ran: generic/579
Failures: generic/579
Failed 1 of 1 tests
Xunit report: /results/f2fs/results-default/result.xml
Here's the contents of 579.full:
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
*** fsck.f2fs output ***
[ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10]
The root cause is that we forgot to update directory's i_pino during
cross_rename, fix it.
Fixes: 32f9bc25cbda0 ("f2fs: support ->rename2()")
Signed-off-by: Chao Yu <[email protected]>
Tested-by: Eric Biggers <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/namei.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 6b23dcbf52f4..0ace2c2e3de9 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -948,7 +948,8 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
if (!old_dir_entry || whiteout)
file_lost_pino(old_inode);
else
- F2FS_I(old_inode)->i_pino = new_dir->i_ino;
+ /* adjust dir's i_pino to pass fsck check */
+ f2fs_i_pino_write(old_inode, new_dir->i_ino);
up_write(&F2FS_I(old_inode)->i_sem);
old_inode->i_ctime = current_time(old_inode);
@@ -1103,7 +1104,11 @@ static int f2fs_cross_rename(struct inode *old_dir, struct dentry *old_dentry,
f2fs_set_link(old_dir, old_entry, old_page, new_inode);
down_write(&F2FS_I(old_inode)->i_sem);
- file_lost_pino(old_inode);
+ if (!old_dir_entry)
+ file_lost_pino(old_inode);
+ else
+ /* adjust dir's i_pino to pass fsck check */
+ f2fs_i_pino_write(old_inode, new_dir->i_ino);
up_write(&F2FS_I(old_inode)->i_sem);
old_dir->i_ctime = current_time(old_dir);
@@ -1118,7 +1123,11 @@ static int f2fs_cross_rename(struct inode *old_dir, struct dentry *old_dentry,
f2fs_set_link(new_dir, new_entry, new_page, old_inode);
down_write(&F2FS_I(new_inode)->i_sem);
- file_lost_pino(new_inode);
+ if (!new_dir_entry)
+ file_lost_pino(new_inode);
+ else
+ /* adjust dir's i_pino to pass fsck check */
+ f2fs_i_pino_write(new_inode, old_dir->i_ino);
up_write(&F2FS_I(new_inode)->i_sem);
new_dir->i_ctime = current_time(new_dir);
--
2.20.1
From: Michael Hennerich <[email protected]>
[ Upstream commit fc59462c5ce60da119568fac325c92fc6b7c6175 ]
For an external clock source, which is gated via a GPIO, the
rate change should typically be propagated to the parent clock.
The situation where we are requiring this propagation, is when an
external clock is connected to override an internal clock (which typically
has a fixed rate). The external clock can have a different rate than the
internal one, and may also be variable, thus requiring the rate
propagation.
This rate change wasn't propagated until now, and it's unclear about cases
where this shouldn't be propagated. Thus, it's unclear whether this is
fixing a bug, or extending the current driver behavior. Also, it's unsure
about whether this may break any existing setups; in the case that it does,
a device-tree property may be added to disable this flag.
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-gpio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c
index 40af4fbab4d2..af9cc00d2d92 100644
--- a/drivers/clk/clk-gpio.c
+++ b/drivers/clk/clk-gpio.c
@@ -248,7 +248,7 @@ static int gpio_clk_driver_probe(struct platform_device *pdev)
else
clk = clk_register_gpio_gate(&pdev->dev, node->name,
parent_names ? parent_names[0] : NULL, gpiod,
- 0);
+ CLK_SET_RATE_PARENT);
if (IS_ERR(clk))
return PTR_ERR(clk);
--
2.20.1
From: Matthew Bobrowski <[email protected]>
[ Upstream commit 2e9b51d78229d5145725a481bb5464ebc0a3f9b2 ]
This patch addresses what Dave Chinner had discovered and fixed within
commit: 7684e2c4384d. This changes does not have any user visible
impact for ext4 as none of the current users of ext4_iomap_begin()
that extend files depend on IOMAP_F_DIRTY.
When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.
However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion when
O_DSYNC writes are being used and the hardware supports FUA.
Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync() to
flush the inode size update to stable storage correctly.
Signed-off-by: Matthew Bobrowski <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Ritesh Harjani <[email protected]>
Link: https://lore.kernel.org/r/8b43ee9ee94bee5328da56ba0909b7d2229ef150.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/inode.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 00d0c4b8fa30..950e3dcff7b0 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3544,8 +3544,14 @@ retry:
return ret;
}
+ /*
+ * Writes that span EOF might trigger an I/O size update on completion,
+ * so consider them to be dirty for the purposes of O_DSYNC, even if
+ * there is no other metadata changes being made or are pending here.
+ */
iomap->flags = 0;
- if (ext4_inode_datasync_dirty(inode))
+ if (ext4_inode_datasync_dirty(inode) ||
+ offset + length > i_size_read(inode))
iomap->flags |= IOMAP_F_DIRTY;
iomap->bdev = inode->i_sb->s_bdev;
iomap->dax_dev = sbi->s_daxdev;
--
2.20.1
From: Robert Jarzmik <[email protected]>
[ Upstream commit 46acbcb4849b2ca2e6e975e7c8130c1d61c8fd0c ]
The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and
rtc-pxa drivers.
A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't
fixed. This patch completes the previous one.
Fixes: 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc")
Signed-off-by: Robert Jarzmik <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/pxa/clk-pxa27x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c
index d40b63e7bbce..b44c4cf8011a 100644
--- a/drivers/clk/pxa/clk-pxa27x.c
+++ b/drivers/clk/pxa/clk-pxa27x.c
@@ -463,6 +463,7 @@ struct dummy_clk {
};
static struct dummy_clk dummy_clks[] __initdata = {
DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"),
+ DUMMY_CLK(NULL, "pxa-rtc", "osc_32_768khz"),
DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
};
--
2.20.1
From: James Smart <[email protected]>
[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ]
Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:
The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.
The mailbox response data is only copied if there is a valid port-wide
pointer.
In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion. The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer. The completion path had cleared the active flag under lock, but
had not touched the port pointer. The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.
Fix by making the calls that clear mbox state/port pointer while under
lock. Also slightly cleaned up the error path.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f459fd62e493..bd555f886d27 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12928,13 +12928,19 @@ send_current_mbox:
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
/* Setting active mailbox pointer need to be in sync to flag clear */
phba->sli.mbox_active = NULL;
+ if (bf_get(lpfc_trailer_consumed, mcqe))
+ lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
spin_unlock_irqrestore(&phba->hbalock, iflags);
/* Wake up worker thread to post the next pending mailbox command */
lpfc_worker_wake_up(phba);
+ return workposted;
+
out_no_mqe_complete:
+ spin_lock_irqsave(&phba->hbalock, iflags);
if (bf_get(lpfc_trailer_consumed, mcqe))
lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
- return workposted;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return false;
}
/**
--
2.20.1
From: Aneesh Kumar K.V <[email protected]>
[ Upstream commit 75838a3290cd4ebbd1f567f310ba04b6ef017ce4 ]
If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table
insert by removing a random entry from the group.
After some runtime, it is very well possible to find all the 8 hash page table
entry slot in the hpte group used for mapping. Don't fail a bolted entry insert
in that case. With Storage class memory a user can find this error easily since
a namespace enable/disable is equivalent to memory add/remove.
This results in failures as reported below:
$ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M
libndctl: ndctl_dax_enable: dax1.3: failed to enable
Error: namespace1.2: failed to enable
failed to create namespace: No such device or address
In kernel log we find the details as below:
Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1
dax_pmem: probe of dax1.3 failed with error -14
This indicates that we failed to create a bolted hash table entry for direct-map
address backing the namespace.
We also observe failures such that not all namespaces will be enabled with
ndctl enable-namespace all command.
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/hash_utils_64.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index b1007e9a31ba..11b41383e167 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -296,7 +296,14 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
HPTE_V_BOLTED, psize, psize,
ssize);
-
+ if (ret == -1) {
+ /* Try to remove a non bolted entry */
+ ret = mmu_hash_ops.hpte_remove(hpteg);
+ if (ret != -1)
+ ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
+ HPTE_V_BOLTED, psize, psize,
+ ssize);
+ }
if (ret < 0)
break;
--
2.20.1
From: Michael Ellerman <[email protected]>
[ Upstream commit e44ff9ea8f4c8a90c82f7b85bd4f5e497c841960 ]
Some of our scripts are passed $objdump and then call it as
"$objdump". This doesn't work if it contains spaces because we're
using ccache, for example you get errors such as:
./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory
./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory
Fix it by not quoting the string when we expand it, allowing the shell
to do the right thing for us.
Fixes: a71aa05e1416 ("powerpc: Convert relocs_check to a shell script using grep")
Fixes: 4ea80652dc75 ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors")
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/tools/relocs_check.sh | 2 +-
arch/powerpc/tools/unrel_branch_check.sh | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh
index ec2d5c835170..d6c16e7faa38 100755
--- a/arch/powerpc/tools/relocs_check.sh
+++ b/arch/powerpc/tools/relocs_check.sh
@@ -23,7 +23,7 @@ objdump="$1"
vmlinux="$2"
bad_relocs=$(
-"$objdump" -R "$vmlinux" |
+$objdump -R "$vmlinux" |
# Only look at relocation lines.
grep -E '\<R_' |
# These relocations are okay
diff --git a/arch/powerpc/tools/unrel_branch_check.sh b/arch/powerpc/tools/unrel_branch_check.sh
index 1e972df3107e..77114755dc6f 100755
--- a/arch/powerpc/tools/unrel_branch_check.sh
+++ b/arch/powerpc/tools/unrel_branch_check.sh
@@ -18,14 +18,14 @@ vmlinux="$2"
#__end_interrupts should be located within the first 64K
end_intr=0x$(
-"$objdump" -R "$vmlinux" -d --start-address=0xc000000000000000 \
+$objdump -R "$vmlinux" -d --start-address=0xc000000000000000 \
--stop-address=0xc000000000010000 |
grep '\<__end_interrupts>:' |
awk '{print $1}'
)
BRANCHES=$(
-"$objdump" -R "$vmlinux" -D --start-address=0xc000000000000000 \
+$objdump -R "$vmlinux" -D --start-address=0xc000000000000000 \
--stop-address=${end_intr} |
grep -e "^c[0-9a-f]*:[[:space:]]*\([0-9a-f][0-9a-f][[:space:]]\)\{4\}[[:space:]]*b" |
grep -v '\<__start_initialization_multiplatform>' |
--
2.20.1
From: Jinke Fan <[email protected]>
[ Upstream commit f1a0094cbbe97a5f8aca7bdc64bfe43ac9dc6879 ]
The PixArt OEM mouse disconnets/reconnects every minute on
Linux. All contents of dmesg are repetitive:
[ 1465.810014] usb 1-2.2: USB disconnect, device number 20
[ 1467.431509] usb 1-2.2: new low-speed USB device number 21 using xhci_hcd
[ 1467.654982] usb 1-2.2: New USB device found, idVendor=03f0,idProduct=1f4a, bcdDevice= 1.00
[ 1467.654985] usb 1-2.2: New USB device strings: Mfr=1, Product=2,SerialNumber=0
[ 1467.654987] usb 1-2.2: Product: HP USB Optical Mouse
[ 1467.654988] usb 1-2.2: Manufacturer: PixArt
[ 1467.699722] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1F4A.0012/input/input19
[ 1467.700124] hid-generic 0003:03F0:1F4A.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:05:00.3-2.2/input0
So add HID_QUIRK_ALWAYS_POLL for this one as well.
Test the patch, the mouse is no longer disconnected and there are no
duplicate logs in dmesg.
Reference:
https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Jinke Fan <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-quirks.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 02c263a4c083..1949d6fca53e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -563,6 +563,7 @@
#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A 0x094a
#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0941 0x0941
#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0641 0x0641
+#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_1f4a 0x1f4a
#define USB_VENDOR_ID_HUION 0x256c
#define USB_DEVICE_ID_HUION_TABLET 0x006e
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index a407fd2399ff..57d6fe9ed416 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -96,6 +96,7 @@ static const struct hid_device_id hid_quirks[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0941), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0641), HID_QUIRK_ALWAYS_POLL },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_1f4a), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6680), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_INNOMEDIA, USB_DEVICE_ID_INNEX_GENESIS_ATARI), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X), HID_QUIRK_MULTI_INPUT },
--
2.20.1
From: Coly Li <[email protected]>
[ Upstream commit 9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ]
In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;
nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.
If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.
This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/btree.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 45f684689c35..bb40bd66a10e 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -713,6 +713,8 @@ static unsigned long bch_mca_scan(struct shrinker *shrink,
* IO can always make forward progress:
*/
nr /= c->btree_pages;
+ if (nr == 0)
+ nr = 1;
nr = min_t(unsigned long, nr, mca_can_free(c));
i = 0;
--
2.20.1
From: Xiang Chen <[email protected]>
[ Upstream commit 550c0d89d52d3bec5c299f69b4ed5d2ee6b8a9a6 ]
For IOs from upper layer, preemption may be disabled as it may be called by
function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables
preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function
hisi_sas_task_exec(), it may disable preempt twice after down() and up()
which will cause following call trace:
BUG: scheduling while atomic: fio/60373/0x00000002
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xa0/0xc4
__schedule_bug+0x68/0x88
__schedule+0x4b8/0x548
schedule+0x40/0xd0
schedule_timeout+0x200/0x378
__down+0x78/0xc8
down+0x54/0x70
hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main]
hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
sas_queuecommand+0x168/0x1b0 [libsas]
scsi_queue_rq+0x2ac/0x980
blk_mq_dispatch_rq_list+0xb0/0x550
blk_mq_do_dispatch_sched+0x6c/0x110
blk_mq_sched_dispatch_requests+0x114/0x1d8
__blk_mq_run_hw_queue+0xb8/0x130
__blk_mq_delay_run_hw_queue+0x1c0/0x220
blk_mq_run_hw_queue+0xb0/0x128
blk_mq_sched_insert_requests+0xdc/0x208
blk_mq_flush_plug_list+0x1b4/0x3a0
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x3c/0x50
blkdev_direct_IO+0x404/0x550
generic_file_read_iter+0x9c/0x848
blkdev_read_iter+0x50/0x78
aio_read+0xc8/0x170
io_submit_one+0x1fc/0x8d8
__arm64_sys_io_submit+0xdc/0x280
el0_svc_common.constprop.0+0xe0/0x1e0
el0_svc_handler+0x34/0x90
el0_svc+0x10/0x14
...
To solve the issue, check preemptible() to avoid disabling preempt multiple
when flag HISI_SAS_REJECT_CMD_BIT is set.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index f35c56217694..33191673249c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -485,7 +485,13 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
struct hisi_sas_dq *dq = NULL;
if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags))) {
- if (in_softirq())
+ /*
+ * For IOs from upper layer, it may already disable preempt
+ * in the IO path, if disable preempt again in down(),
+ * function schedule() will report schedule_bug(), so check
+ * preemptible() before goto down().
+ */
+ if (!preemptible())
return -EINVAL;
down(&hisi_hba->sem);
--
2.20.1
From: Ezequiel Garcia <[email protected]>
[ Upstream commit 42bb97b80f2e3bf592e3e99d109b67309aa1b30e ]
IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.
Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.
Signed-off-by: Ezequiel Garcia <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/rockchip-iommu.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index ad3e2b97469e..140b287e886c 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -977,13 +977,13 @@ static struct iommu_domain *rk_iommu_domain_alloc(unsigned type)
if (!dma_dev)
return NULL;
- rk_domain = devm_kzalloc(dma_dev, sizeof(*rk_domain), GFP_KERNEL);
+ rk_domain = kzalloc(sizeof(*rk_domain), GFP_KERNEL);
if (!rk_domain)
return NULL;
if (type == IOMMU_DOMAIN_DMA &&
iommu_get_dma_cookie(&rk_domain->domain))
- return NULL;
+ goto err_free_domain;
/*
* rk32xx iommus use a 2 level pagetable.
@@ -1018,6 +1018,8 @@ err_free_dt:
err_put_cookie:
if (type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(&rk_domain->domain);
+err_free_domain:
+ kfree(rk_domain);
return NULL;
}
@@ -1046,6 +1048,7 @@ static void rk_iommu_domain_free(struct iommu_domain *domain)
if (domain->type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(&rk_domain->domain);
+ kfree(rk_domain);
}
static int rk_iommu_add_device(struct device *dev)
--
2.20.1
From: David Disseldorp <[email protected]>
[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ]
RFC 2307 states:
For CHAP [RFC1994], in the first step, the initiator MUST send:
CHAP_A=<A1,A2...>
Where A1,A2... are proposed algorithms, in order of preference.
...
For the Algorithm, as stated in [RFC1994], one value is required to
be implemented:
5 (CHAP with MD5)
LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: David Disseldorp <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/iscsi/iscsi_target_auth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c
index e2fa3a3bc81d..b6bf605fa5c1 100644
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -78,7 +78,7 @@ static int chap_check_algorithm(const char *a_str)
if (!token)
goto out;
- if (!strncmp(token, "5", 1)) {
+ if (!strcmp(token, "5")) {
pr_debug("Selected MD5 Algorithm\n");
kfree(orig);
return CHAP_DIGEST_MD5;
--
2.20.1
From: Matthew Bobrowski <[email protected]>
[ Upstream commit 548feebec7e93e58b647dba70b3303dcb569c914 ]
This patch updates the lock pattern in ext4_direct_IO_read() to not
block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The
locking condition implemented here is similar to that of 942491c9e6d6
("xfs: fix AIM7 regression").
Fixes: 16c54688592c ("ext4: Allow parallel DIO reads")
Signed-off-by: Matthew Bobrowski <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Ritesh Harjani <[email protected]>
Link: https://lore.kernel.org/r/c5d5e759f91747359fbd2c6f9a36240cf75ad79f.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/inode.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 215802cbc42b..00d0c4b8fa30 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3848,7 +3848,13 @@ static ssize_t ext4_direct_IO_read(struct kiocb *iocb, struct iov_iter *iter)
* writes & truncates and since we take care of writing back page cache,
* we are protected against page writeback as well.
*/
- inode_lock_shared(inode);
+ if (iocb->ki_flags & IOCB_NOWAIT) {
+ if (!inode_trylock_shared(inode))
+ return -EAGAIN;
+ } else {
+ inode_lock_shared(inode);
+ }
+
ret = filemap_write_and_wait_range(mapping, iocb->ki_pos,
iocb->ki_pos + count - 1);
if (ret)
--
2.20.1
From: Harald Freudenberger <[email protected]>
[ Upstream commit 6733775a92eacd612ac88afa0fd922e4ffeb2bc7 ]
This patch introduces support for a new architectured reply
code 0x8B indicating that a hypervisor layer (if any) has
rejected an ap message.
Linux may run as a guest on top of a hypervisor like zVM
or KVM. So the crypto hardware seen by the ap bus may be
restricted by the hypervisor for example only a subset like
only clear key crypto requests may be supported. Other
requests will be filtered out - rejected by the hypervisor.
The new reply code 0x8B will appear in such cases and needs
to get recognized by the ap bus and zcrypt device driver zoo.
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/crypto/zcrypt_error.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/s390/crypto/zcrypt_error.h b/drivers/s390/crypto/zcrypt_error.h
index 2e1a27bd97d1..2126f4cc6d37 100644
--- a/drivers/s390/crypto/zcrypt_error.h
+++ b/drivers/s390/crypto/zcrypt_error.h
@@ -62,6 +62,7 @@ struct error_hdr {
#define REP82_ERROR_EVEN_MOD_IN_OPND 0x85
#define REP82_ERROR_RESERVED_FIELD 0x88
#define REP82_ERROR_INVALID_DOMAIN_PENDING 0x8A
+#define REP82_ERROR_FILTERED_BY_HYPERVISOR 0x8B
#define REP82_ERROR_TRANSPORT_FAIL 0x90
#define REP82_ERROR_PACKET_TRUNCATED 0xA0
#define REP82_ERROR_ZERO_BUFFER_LEN 0xB0
@@ -92,6 +93,7 @@ static inline int convert_error(struct zcrypt_queue *zq,
case REP82_ERROR_INVALID_DOMAIN_PRECHECK:
case REP82_ERROR_INVALID_DOMAIN_PENDING:
case REP82_ERROR_INVALID_SPECIAL_CMD:
+ case REP82_ERROR_FILTERED_BY_HYPERVISOR:
// REP88_ERROR_INVALID_KEY // '82' CEX2A
// REP88_ERROR_OPERAND // '84' CEX2A
// REP88_ERROR_OPERAND_EVEN_MOD // '85' CEX2A
--
2.20.1
From: Andrew Duggan <[email protected]>
[ Upstream commit 8725aa4fa7ded30211ebd28bb1c9bae806eb3841 ]
In the event that the RMI device is unreachable, the calls to rmi_set_mode() or
rmi_set_page() will fail before registering the RMI transport device. When the
device is removed, rmi_remove() will call rmi_unregister_transport_device()
which will attempt to access the rmi_dev pointer which was not set.
This patch adds a check of the RMI_STARTED bit before calling
rmi_unregister_transport_device(). The RMI_STARTED bit is only set
after rmi_register_transport_device() completes successfully.
The kernel oops was reported in this message:
https://www.spinics.net/lists/linux-input/msg58433.html
[[email protected]: reworded changelog as agreed with Andrew]
Signed-off-by: Andrew Duggan <[email protected]>
Reported-by: Federico Cerutti <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-rmi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 9e33165250a3..a5b6b2be9cda 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -737,7 +737,8 @@ static void rmi_remove(struct hid_device *hdev)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
- if (hdata->device_flags & RMI_DEVICE) {
+ if ((hdata->device_flags & RMI_DEVICE)
+ && test_bit(RMI_STARTED, &hdata->flags)) {
clear_bit(RMI_STARTED, &hdata->flags);
cancel_work_sync(&hdata->reset_work);
rmi_unregister_transport_device(&hdata->xport);
--
2.20.1
From: Blaž Hrastnik <[email protected]>
[ Upstream commit 2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]
Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing
data used to verify the touchpad as a Windows Precision Touchpad.
0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA)
0x09, 0xC5, // USAGE (Vendor Usage 0xC5)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff)
0x75, 0x08, // REPORT_SIZE (8)
0x96, 0x00, 0x01, // REPORT_COUNT (0x100 (256))
0xb1, 0x02, // FEATURE (Data,Var,Abs)
However, some devices, namely Microsoft's Surface line of products
instead implement a "segmented device certification report" (usage 0xC6)
which returns the same report, but in smaller chunks.
0x06, 0x00, 0xff, // USAGE_PAGE (Vendor Defined)
0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA)
0x09, 0xC6, // USAGE (Vendor usage for segment #)
0x25, 0x08, // LOGICAL_MAXIMUM (8)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x01, // REPORT_COUNT (1)
0xb1, 0x02, // FEATURE (Data,Var,Abs)
0x09, 0xC7, // USAGE (Vendor Usage)
0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff)
0x95, 0x20, // REPORT_COUNT (32)
0xb1, 0x02, // FEATURE (Data,Var,Abs)
By expanding Win8 touchpad detection to also look for the segmented
report, all Surface touchpads are now properly recognized by
hid-multitouch.
Signed-off-by: Blaž Hrastnik <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index b0c8fae7f903..3a359716fb38 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -780,6 +780,10 @@ static void hid_scan_feature_usage(struct hid_parser *parser, u32 usage)
if (usage == 0xff0000c5 && parser->global.report_count == 256 &&
parser->global.report_size == 8)
parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
+
+ if (usage == 0xff0000c6 && parser->global.report_count == 1 &&
+ parser->global.report_size == 8)
+ parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
}
static void hid_scan_collection(struct hid_parser *parser, unsigned type)
--
2.20.1
From: Eric Dumazet <[email protected]>
commit bbab7ef235031f6733b5429ae7877bfa22339712 upstream.
This code reads two global variables without protection
of a lock. We need READ_ONCE()/WRITE_ONCE() pairs to
avoid load/store-tearing and better document the intent.
KCSAN reported :
BUG: KCSAN: data-race in icmp_global_allow / icmp_global_allow
read to 0xffffffff861a8014 of 4 bytes by task 11201 on cpu 0:
icmp_global_allow+0x36/0x1b0 net/ipv4/icmp.c:254
icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
dst_link_failure include/net/dst.h:419 [inline]
vti_xmit net/ipv4/ip_vti.c:243 [inline]
vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
__netdev_start_xmit include/linux/netdevice.h:4420 [inline]
netdev_start_xmit include/linux/netdevice.h:4434 [inline]
xmit_one net/core/dev.c:3280 [inline]
dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
__dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
__ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
__ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
dst_output include/net/dst.h:436 [inline]
ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179
write to 0xffffffff861a8014 of 4 bytes by task 11183 on cpu 1:
icmp_global_allow+0x174/0x1b0 net/ipv4/icmp.c:272
icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
dst_link_failure include/net/dst.h:419 [inline]
vti_xmit net/ipv4/ip_vti.c:243 [inline]
vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
__netdev_start_xmit include/linux/netdevice.h:4420 [inline]
netdev_start_xmit include/linux/netdevice.h:4434 [inline]
xmit_one net/core/dev.c:3280 [inline]
dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
__dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
neigh_output include/net/neighbour.h:511 [inline]
ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
__ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
__ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/icmp.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -254,10 +254,11 @@ bool icmp_global_allow(void)
bool rc = false;
/* Check if token bucket is empty and cannot be refilled
- * without taking the spinlock.
+ * without taking the spinlock. The READ_ONCE() are paired
+ * with the following WRITE_ONCE() in this same function.
*/
- if (!icmp_global.credit) {
- delta = min_t(u32, now - icmp_global.stamp, HZ);
+ if (!READ_ONCE(icmp_global.credit)) {
+ delta = min_t(u32, now - READ_ONCE(icmp_global.stamp), HZ);
if (delta < HZ / 50)
return false;
}
@@ -267,14 +268,14 @@ bool icmp_global_allow(void)
if (delta >= HZ / 50) {
incr = sysctl_icmp_msgs_per_sec * delta / HZ ;
if (incr)
- icmp_global.stamp = now;
+ WRITE_ONCE(icmp_global.stamp, now);
}
credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
if (credit) {
credit--;
rc = true;
}
- icmp_global.credit = credit;
+ WRITE_ONCE(icmp_global.credit, credit);
spin_unlock(&icmp_global.lock);
return rc;
}
From: Martin Blumenstingl <[email protected]>
[ Upstream commit bd6f48546b9cb7a785344fc78058c420923d7ed8 ]
GXBB and newer SoCs use the fixed FCLK_DIV2 (1GHz) clock as input for
the m250_sel clock. Meson8b and Meson8m2 use MPLL2 instead, whose rate
can be adjusted at runtime.
So far we have been running MPLL2 with ~250MHz (and the internal
m250_div with value 1), which worked enough that we could transfer data
with an TX delay of 4ns. Unfortunately there is high packet loss with
an RGMII PHY when transferring data (receiving data works fine though).
Odroid-C1's u-boot is running with a TX delay of only 2ns as well as
the internal m250_div set to 2 - no lost (TX) packets can be observed
with that setting in u-boot.
Manual testing has shown that the TX packet loss goes away when using
the following settings in Linux (the vendor kernel uses the same
settings):
- MPLL2 clock set to ~500MHz
- m250_div set to 2
- TX delay set to 2ns on the MAC side
Update the m250_div divider settings to only accept dividers greater or
equal 2 to fix the TX delay generated by the MAC.
iperf3 results before the change:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 182 MBytes 153 Mbits/sec 514 sender
[ 5] 0.00-10.00 sec 182 MBytes 152 Mbits/sec receiver
iperf3 results after the change (including an updated TX delay of 2ns):
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-10.00 sec 927 MBytes 778 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 927 MBytes 777 Mbits/sec receiver
Fixes: 4f6a71b84e1afd ("net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration")
Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -118,6 +118,14 @@ static int meson8b_init_rgmii_tx_clk(str
struct device *dev = dwmac->dev;
const char *parent_name, *mux_parent_names[MUX_CLK_NUM_PARENTS];
struct meson8b_dwmac_clk_configs *clk_configs;
+ static const struct clk_div_table div_table[] = {
+ { .div = 2, .val = 2, },
+ { .div = 3, .val = 3, },
+ { .div = 4, .val = 4, },
+ { .div = 5, .val = 5, },
+ { .div = 6, .val = 6, },
+ { .div = 7, .val = 7, },
+ };
clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
if (!clk_configs)
@@ -152,9 +160,9 @@ static int meson8b_init_rgmii_tx_clk(str
clk_configs->m250_div.reg = dwmac->regs + PRG_ETH0;
clk_configs->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
clk_configs->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
- clk_configs->m250_div.flags = CLK_DIVIDER_ONE_BASED |
- CLK_DIVIDER_ALLOW_ZERO |
- CLK_DIVIDER_ROUND_CLOSEST;
+ clk_configs->m250_div.table = div_table;
+ clk_configs->m250_div.flags = CLK_DIVIDER_ALLOW_ZERO |
+ CLK_DIVIDER_ROUND_CLOSEST;
clk = meson8b_dwmac_register_clk(dwmac, "m250_div", &parent_name, 1,
&clk_divider_ops,
&clk_configs->m250_div.hw);
From: Alexander Lobakin <[email protected]>
[ Upstream commit 1148f9adbe71415836a18a36c1b4ece999ab0973 ]
proc_dointvec_minmax_bpf_restricted() has been firstly introduced
in commit 2e4a30983b0f ("bpf: restrict access to core bpf sysctls")
under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in
ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv
allocations"), because a new sysctl, bpf_jit_limit, made use of it.
Finally, this parameter has become long instead of integer with
fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
and thus, a new proc_dolongvec_minmax_bpf_restricted() has been
added.
With this last change, we got back to that
proc_dointvec_minmax_bpf_restricted() is used only under
CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been
brought back.
So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n
since v4.20 we have:
CC net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.
Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/sysctl_net_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index d67ec17f2cc8..6cec08cd0bb9 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -281,6 +281,7 @@ static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
return ret;
}
+# ifdef CONFIG_HAVE_EBPF_JIT
static int
proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
@@ -291,6 +292,7 @@ proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
}
+# endif /* CONFIG_HAVE_EBPF_JIT */
static int
proc_dolongvec_minmax_bpf_restricted(struct ctl_table *table, int write,
--
2.20.1
From: Christophe Leroy <[email protected]>
[ Upstream commit 3194d2533efffae8b815d84729ecc58b6a9000ab ]
With lastest kernel, the following warning is observed at startup:
[ 1.500609] ------------[ cut here ]------------
[ 1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi'
[ 1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0
[ 1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564
[ 1.530724] NIP: c0197694 LR: c0197694 CTR: c0050d80
[ 1.535762] REGS: df4a5af0 TRAP: 0700 Not tainted (5.4.0-02248-g93532430a4ff)
[ 1.543818] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22028222 XER: 00000000
[ 1.550524]
[ 1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010
[ 1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000
[ 1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078
[ 1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3
[ 1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0
[ 1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0
[ 1.595829] Call Trace:
[ 1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable)
[ 1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70
[ 1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80
[ 1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8
[ 1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc
[ 1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4
[ 1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418
[ 1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0
[ 1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128
[ 1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc
[ 1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c
[ 1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100
[ 1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c
[ 1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c
[ 1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0
[ 1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4
[ 1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4
[ 1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204
[ 1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110
[ 1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c
[ 1.719926] Instruction dump:
[ 1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78
[ 1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78
[ 1.738556] ---[ end trace 05d0720bf2e352e2 ]---
The problem comes from the error path which calls
irq_dispose_mapping() while the IRQ has been requested with
devm_request_irq().
IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only
need is to get the IRQ virtual number. For that, use
of_irq_to_resource() instead of the
irq_of_parse_and_map()/irq_dispose_mapping() pair.
Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsl-spi.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 8f2e97857e8b..fb34ba3f2b23 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -832,8 +832,8 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
if (ret)
goto err;
- irq = irq_of_parse_and_map(np, 0);
- if (!irq) {
+ irq = of_irq_to_resource(np, 0, NULL);
+ if (irq <= 0) {
ret = -EINVAL;
goto err;
}
@@ -847,7 +847,6 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
return 0;
err:
- irq_dispose_mapping(irq);
if (type == TYPE_FSL)
of_fsl_spi_free_chipselects(dev);
return ret;
--
2.20.1
From: Eric Dumazet <[email protected]>
commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream.
Michal Kubecek and Firo Yang did a very nice analysis of crashes
happening in __inet_lookup_established().
Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN
(via a close()/socket()/listen() cycle) without a RCU grace period,
I should not have changed listeners linkage in their hash table.
They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt),
so that a lookup can detect a socket in a hash list was moved in
another one.
Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve
merge conflict for v4/v6 ordering fix"), we have to add
hlist_nulls_add_tail_rcu() helper.
Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Michal Kubecek <[email protected]>
Reported-by: Firo Yang <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
[stable-4.19: we also need to update code in __inet_lookup_listener() and
inet6_lookup_listener() which has been removed in 5.0-rc1.]
Signed-off-by: Michal Kubecek <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/rculist_nulls.h | 37 +++++++++++++++++++++++++++++++++++++
include/net/inet_hashtables.h | 12 +++++++++---
include/net/sock.h | 5 +++++
net/ipv4/inet_diag.c | 3 ++-
net/ipv4/inet_hashtables.c | 19 ++++++++++---------
net/ipv4/tcp_ipv4.c | 7 ++++---
net/ipv6/inet6_hashtables.c | 3 ++-
7 files changed, 69 insertions(+), 17 deletions(-)
--- a/include/linux/rculist_nulls.h
+++ b/include/linux/rculist_nulls.h
@@ -101,6 +101,43 @@ static inline void hlist_nulls_add_head_
}
/**
+ * hlist_nulls_add_tail_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_nulls,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs. Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_nulls_add_tail_rcu(struct hlist_nulls_node *n,
+ struct hlist_nulls_head *h)
+{
+ struct hlist_nulls_node *i, *last = NULL;
+
+ /* Note: write side code, so rcu accessors are not needed. */
+ for (i = h->first; !is_a_nulls(i); i = i->next)
+ last = i;
+
+ if (last) {
+ n->next = last->next;
+ n->pprev = &last->next;
+ rcu_assign_pointer(hlist_next_rcu(last), n);
+ } else {
+ hlist_nulls_add_head_rcu(n, h);
+ }
+}
+
+/**
* hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
* @tpos: the type * to use as a loop cursor.
* @pos: the &struct hlist_nulls_node to use as a loop cursor.
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -106,13 +106,19 @@ struct inet_bind_hashbucket {
struct hlist_head chain;
};
-/*
- * Sockets can be hashed in established or listening table
+/* Sockets can be hashed in established or listening table.
+ * We must use different 'nulls' end-of-chain value for all hash buckets :
+ * A socket might transition from ESTABLISH to LISTEN state without
+ * RCU grace period. A lookup in ehash table needs to handle this case.
*/
+#define LISTENING_NULLS_BASE (1U << 29)
struct inet_listen_hashbucket {
spinlock_t lock;
unsigned int count;
- struct hlist_head head;
+ union {
+ struct hlist_head head;
+ struct hlist_nulls_head nulls_head;
+ };
};
/* This is for listening sockets, thus all sockets which possess wildcards. */
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -721,6 +721,11 @@ static inline void __sk_nulls_add_node_r
hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);
}
+static inline void __sk_nulls_add_node_tail_rcu(struct sock *sk, struct hlist_nulls_head *list)
+{
+ hlist_nulls_add_tail_rcu(&sk->sk_nulls_node, list);
+}
+
static inline void sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
{
sock_hold(sk);
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -918,11 +918,12 @@ void inet_diag_dump_icsk(struct inet_has
for (i = s_i; i < INET_LHTABLE_SIZE; i++) {
struct inet_listen_hashbucket *ilb;
+ struct hlist_nulls_node *node;
num = 0;
ilb = &hashinfo->listening_hash[i];
spin_lock(&ilb->lock);
- sk_for_each(sk, &ilb->head) {
+ sk_nulls_for_each(sk, node, &ilb->nulls_head) {
struct inet_sock *inet = inet_sk(sk);
if (!net_eq(sock_net(sk), net))
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -308,6 +308,7 @@ struct sock *__inet_lookup_listener(stru
bool exact_dif = inet_exact_dif_match(net, skb);
struct inet_listen_hashbucket *ilb2;
struct sock *sk, *result = NULL;
+ struct hlist_nulls_node *node;
int score, hiscore = 0;
unsigned int hash2;
u32 phash = 0;
@@ -343,7 +344,7 @@ struct sock *__inet_lookup_listener(stru
goto done;
port_lookup:
- sk_for_each_rcu(sk, &ilb->head) {
+ sk_nulls_for_each_rcu(sk, node, &ilb->nulls_head) {
score = compute_score(sk, net, hnum, daddr,
dif, sdif, exact_dif);
if (score > hiscore) {
@@ -560,10 +561,11 @@ static int inet_reuseport_add_sock(struc
struct inet_listen_hashbucket *ilb)
{
struct inet_bind_bucket *tb = inet_csk(sk)->icsk_bind_hash;
+ const struct hlist_nulls_node *node;
struct sock *sk2;
kuid_t uid = sock_i_uid(sk);
- sk_for_each_rcu(sk2, &ilb->head) {
+ sk_nulls_for_each_rcu(sk2, node, &ilb->nulls_head) {
if (sk2 != sk &&
sk2->sk_family == sk->sk_family &&
ipv6_only_sock(sk2) == ipv6_only_sock(sk) &&
@@ -599,9 +601,9 @@ int __inet_hash(struct sock *sk, struct
}
if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport &&
sk->sk_family == AF_INET6)
- hlist_add_tail_rcu(&sk->sk_node, &ilb->head);
+ __sk_nulls_add_node_tail_rcu(sk, &ilb->nulls_head);
else
- hlist_add_head_rcu(&sk->sk_node, &ilb->head);
+ __sk_nulls_add_node_rcu(sk, &ilb->nulls_head);
inet_hash2(hashinfo, sk);
ilb->count++;
sock_set_flag(sk, SOCK_RCU_FREE);
@@ -650,11 +652,9 @@ void inet_unhash(struct sock *sk)
reuseport_detach_sock(sk);
if (ilb) {
inet_unhash2(hashinfo, sk);
- __sk_del_node_init(sk);
- ilb->count--;
- } else {
- __sk_nulls_del_node_init_rcu(sk);
+ ilb->count--;
}
+ __sk_nulls_del_node_init_rcu(sk);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
unlock:
spin_unlock_bh(lock);
@@ -790,7 +790,8 @@ void inet_hashinfo_init(struct inet_hash
for (i = 0; i < INET_LHTABLE_SIZE; i++) {
spin_lock_init(&h->listening_hash[i].lock);
- INIT_HLIST_HEAD(&h->listening_hash[i].head);
+ INIT_HLIST_NULLS_HEAD(&h->listening_hash[i].nulls_head,
+ i + LISTENING_NULLS_BASE);
h->listening_hash[i].count = 0;
}
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2020,13 +2020,14 @@ static void *listening_get_next(struct s
struct tcp_iter_state *st = seq->private;
struct net *net = seq_file_net(seq);
struct inet_listen_hashbucket *ilb;
+ struct hlist_nulls_node *node;
struct sock *sk = cur;
if (!sk) {
get_head:
ilb = &tcp_hashinfo.listening_hash[st->bucket];
spin_lock(&ilb->lock);
- sk = sk_head(&ilb->head);
+ sk = sk_nulls_head(&ilb->nulls_head);
st->offset = 0;
goto get_sk;
}
@@ -2034,9 +2035,9 @@ get_head:
++st->num;
++st->offset;
- sk = sk_next(sk);
+ sk = sk_nulls_next(sk);
get_sk:
- sk_for_each_from(sk) {
+ sk_nulls_for_each_from(sk, node) {
if (!net_eq(sock_net(sk), net))
continue;
if (sk->sk_family == afinfo->family)
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -171,6 +171,7 @@ struct sock *inet6_lookup_listener(struc
bool exact_dif = inet6_exact_dif_match(net, skb);
struct inet_listen_hashbucket *ilb2;
struct sock *sk, *result = NULL;
+ struct hlist_nulls_node *node;
int score, hiscore = 0;
unsigned int hash2;
u32 phash = 0;
@@ -206,7 +207,7 @@ struct sock *inet6_lookup_listener(struc
goto done;
port_lookup:
- sk_for_each(sk, &ilb->head) {
+ sk_nulls_for_each(sk, node, &ilb->nulls_head) {
score = compute_score(sk, net, hnum, daddr, dif, sdif, exact_dif);
if (score > hiscore) {
if (sk->sk_reuseport) {
From: Hangbin Liu <[email protected]>
[ Upstream commit 8247a79efa2f28b44329f363272550c1738377de ]
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Although vti and vti6 are immune to this problem because they are IFF_NOARP
interfaces, as Guillaume pointed. There is still no sense to confirm neighbour
here.
v5: Update commit description.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_vti.c | 2 +-
net/ipv6/ip6_vti.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -235,7 +235,7 @@ static netdev_tx_t vti_xmit(struct sk_bu
mtu = dst_mtu(dst);
if (skb->len > mtu) {
- skb_dst_update_pmtu(skb, mtu);
+ skb_dst_update_pmtu_no_confirm(skb, mtu);
if (skb->protocol == htons(ETH_P_IP)) {
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
htonl(mtu));
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -483,7 +483,7 @@ vti6_xmit(struct sk_buff *skb, struct ne
mtu = dst_mtu(dst);
if (skb->len > mtu) {
- skb_dst_update_pmtu(skb, mtu);
+ skb_dst_update_pmtu_no_confirm(skb, mtu);
if (skb->protocol == htons(ETH_P_IPV6)) {
if (mtu < IPV6_MIN_MTU)
From: Eric Dumazet <[email protected]>
commit 71685eb4ce80ae9c49eff82ca4dd15acab215de9 upstream.
We need to explicitely forbid read/store tearing in inet_peer_gc()
and inet_putpeer().
The following syzbot report reminds us about inet_putpeer()
running without a lock held.
BUG: KCSAN: data-race in inet_putpeer / inet_putpeer
write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 0:
inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
__rcu_reclaim kernel/rcu/rcu.h:222 [inline]
rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x1af/0x280 kernel/sched/idle.c:263
write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 1:
inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
__rcu_reclaim kernel/rcu/rcu.h:222 [inline]
rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
__do_softirq+0x115/0x33f kernel/softirq.c:292
run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 4b9d9be839fd ("inetpeer: remove unused list")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/inetpeer.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -160,7 +160,12 @@ static void inet_peer_gc(struct inet_pee
base->total / inet_peer_threshold * HZ;
for (i = 0; i < gc_cnt; i++) {
p = gc_stack[i];
- delta = (__u32)jiffies - p->dtime;
+
+ /* The READ_ONCE() pairs with the WRITE_ONCE()
+ * in inet_putpeer()
+ */
+ delta = (__u32)jiffies - READ_ONCE(p->dtime);
+
if (delta < ttl || !refcount_dec_if_one(&p->refcnt))
gc_stack[i] = NULL;
}
@@ -237,7 +242,10 @@ EXPORT_SYMBOL_GPL(inet_getpeer);
void inet_putpeer(struct inet_peer *p)
{
- p->dtime = (__u32)jiffies;
+ /* The WRITE_ONCE() pairs with itself (we run lockless)
+ * and the READ_ONCE() in inet_peer_gc()
+ */
+ WRITE_ONCE(p->dtime, (__u32)jiffies);
if (refcount_dec_and_test(&p->refcnt))
call_rcu(&p->rcu, inetpeer_free_rcu);
From: Subhash Jadavani <[email protected]>
[ Upstream commit 6d303e4b19d694cdbebf76bcdb51ada664ee953d ]
During clock gating (ufshcd_gate_work()), we first put the link hibern8 by
calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter()
returns success (0) then we gate all the clocks. Now let’s zoom in to what
ufshcd_uic_hibern8_enter() does internally: It calls
__ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery
shall put the link back to the highest HS gear and returns success (0) to
ufshcd_uic_hibern8_enter() which is the issue as link is still in active
state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to
ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while
link is still in active state hence I believe controller would raise UIC
error interrupts. But when we service the interrupt, clocks might have
already been disabled!
This change fixes for this by returning failure from
__ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in
hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate
retry to put the link state back into hibern8.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Avri Altman <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Signed-off-by: Subhash Jadavani <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 7510d8328d4d..3601e770da16 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3875,15 +3875,24 @@ static int __ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
ktime_to_us(ktime_sub(ktime_get(), start)), ret);
if (ret) {
+ int err;
+
dev_err(hba->dev, "%s: hibern8 enter failed. ret = %d\n",
__func__, ret);
/*
- * If link recovery fails then return error so that caller
- * don't retry the hibern8 enter again.
+ * If link recovery fails then return error code returned from
+ * ufshcd_link_recovery().
+ * If link recovery succeeds then return -EAGAIN to attempt
+ * hibern8 enter retry again.
*/
- if (ufshcd_link_recovery(hba))
- ret = -ENOLINK;
+ err = ufshcd_link_recovery(hba);
+ if (err) {
+ dev_err(hba->dev, "%s: link recovery failed", __func__);
+ ret = err;
+ } else {
+ ret = -EAGAIN;
+ }
} else
ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER,
POST_CHANGE);
@@ -3897,7 +3906,7 @@ static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
for (retries = UIC_HIBERN8_ENTER_RETRIES; retries > 0; retries--) {
ret = __ufshcd_uic_hibern8_enter(hba);
- if (!ret || ret == -ENOLINK)
+ if (!ret)
goto out;
}
out:
--
2.20.1
Hi!
Changelog explains author is not sure if this will break existing
setups:
> This rate change wasn't propagated until now, and it's unclear about cases
> where this shouldn't be propagated. Thus, it's unclear whether this is
> fixing a bug, or extending the current driver behavior. Also, it's unsure
> about whether this may break any existing setups; in the case that it does,
> a device-tree property may be added to disable this flag.
I don't see explanation how this fixes any user bug, so this may not
be good patch for stable?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On 1/2/20 2:06 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.93 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 155 fail: 1
Failed builds:
sparc64:allmodconfig
Qemu test results:
total: 381 pass: 381 fail: 0
ERROR: "of_irq_to_resource" [drivers/spi/spi-fsl-spi.ko] undefined!
Caused by 3194d2533eff ("spi: fsl: don't map irq during probe")
which is missing its fix, 63aa6a692595 ("spi: fsl: use platform_get_irq()
instead of of_irq_to_resource()")
Guenter
On Fri, Jan 03, 2020 at 06:27:53AM -0800, Guenter Roeck wrote:
> On 1/2/20 2:06 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.93 release.
> > There are 114 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 156 pass: 155 fail: 1
> Failed builds:
> sparc64:allmodconfig
> Qemu test results:
> total: 381 pass: 381 fail: 0
>
> ERROR: "of_irq_to_resource" [drivers/spi/spi-fsl-spi.ko] undefined!
>
> Caused by 3194d2533eff ("spi: fsl: don't map irq during probe")
> which is missing its fix, 63aa6a692595 ("spi: fsl: use platform_get_irq()
> instead of of_irq_to_resource()")
Now added to 4.14 and 4.19 queues, thanks!
greg k-h
Hi!
> From: Maurizio Lombardi <[email protected]>
>
> [ Upstream commit aa5334c4f3014940f11bf876e919c956abef4089 ]
>
> Passing the parameter "num_tgts=-1" will start an infinite loop that
> exhausts the system memory
Should we provide some kind of upper bound for num_tgts, too?
Otherwise integer overflow will follow later in the code. Even without
overflow, it will kill the system due to OOM...
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
> From: Chengguang Xu <[email protected]>
>
> [ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
>
> Setting softlimit larger than hardlimit seems meaningless
> for disk quota but currently it is allowed. In this case,
> there may be a bit of comfusion for users when they run
> df comamnd to directory which has project quota.
>
> For example, we set 20M softlimit and 10M hardlimit of
> block usage limit for project quota of test_dir(project id 123).
> Signed-off-by: Chengguang Xu <[email protected]>
> Reviewed-by: Chao Yu <[email protected]>
> Signed-off-by: Jaegeuk Kim <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> fs/f2fs/super.c | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index 7a9cc64f5ca3..662c7de58b99 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
> return PTR_ERR(dquot);
> spin_lock(&dquot->dq_dqb_lock);
>
> - limit = (dquot->dq_dqb.dqb_bsoftlimit ?
> - dquot->dq_dqb.dqb_bsoftlimit :
> - dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
> + limit = 0;
> + if (dquot->dq_dqb.dqb_bsoftlimit)
> + limit = dquot->dq_dqb.dqb_bsoftlimit;
> + if (dquot->dq_dqb.dqb_bhardlimit &&
> + (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
> + limit = dquot->dq_dqb.dqb_bhardlimit;
> +
> if (limit && buf->f_blocks > limit) {
>> blocksize disappeared here. That can't be right.
Plus, is this just obfuscated way of saying
limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit, dquot->dq_dqb.dqb_bhardlimit)?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Thu 2020-01-02 23:07:19, Greg Kroah-Hartman wrote:
> From: Masahiro Yamada <[email protected]>
>
> [ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]
>
> The DTC v1.5.1 added references to (U)INT32_MAX.
Is this good idea for stable? We are not planning update of the dtc in 4.19.X?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Fri, Jan 03, 2020 at 04:41:56PM +0100, Greg Kroah-Hartman wrote:
> On Fri, Jan 03, 2020 at 06:27:53AM -0800, Guenter Roeck wrote:
> > On 1/2/20 2:06 PM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.19.93 release.
> > > There are 114 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
> > > Anything received after that time might be too late.
> > >
> >
> > Build results:
> > total: 156 pass: 155 fail: 1
> > Failed builds:
> > sparc64:allmodconfig
> > Qemu test results:
> > total: 381 pass: 381 fail: 0
> >
> > ERROR: "of_irq_to_resource" [drivers/spi/spi-fsl-spi.ko] undefined!
> >
> > Caused by 3194d2533eff ("spi: fsl: don't map irq during probe")
> > which is missing its fix, 63aa6a692595 ("spi: fsl: use platform_get_irq()
> > instead of of_irq_to_resource()")
>
> Now added to 4.14 and 4.19 queues, thanks!
>
sparc64:allmodconfig builds now pass in both v4.14.y and v4.19.y queues.
Guenter
On 02/01/2020 22:06, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.93 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.93-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
All tests are passing for Tegra ...
Test results for stable-v4.19:
13 builds: 13 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.19.93-rc2-g6a2e2a4c865f
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
Hi!
> From: Johannes Weiner <[email protected]>
>
> [ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]
>
> Currently, the drop_caches proc file and sysctl read back the last value
> written, suggesting this is somehow a stateful setting instead of a
> one-time command. Make it write-only, like e.g. compact_memory.
I have no problem with that, but is it good idea for stable?
Plus, I seem to recall that drop_caches was somehow dangerous,
debugging-only stuff, one should not use on production system. Did
that get fixed in the meantime?
Best regards,
Pavel
> @@ -1411,7 +1411,7 @@ static struct ctl_table vm_table[] = {
> .procname = "drop_caches",
> .data = &sysctl_drop_caches,
> .maxlen = sizeof(int),
> - .mode = 0644,
> + .mode = 0200,
> .proc_handler = drop_caches_sysctl_handler,
> .extra1 = &one,
> .extra2 = &four,
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
> From: Eric Dumazet <[email protected]>
>
> commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream.
>
> syzbot reported various data-race caused by hrtimer_is_queued() reading
> timer->state. A READ_ONCE() is required there to silence the warning.
>
> Also add the corresponding WRITE_ONCE() when timer->state is set.
>
> In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid
> loading timer->state twice.
Is there a reason why READ_ONCE is not neccessary in remove_hrtimer?
Should there be comment there explaining it?
Best regards,
Pavel
> @@ -1002,8 +1004,9 @@ static void __remove_hrtimer(struct hrti
> static inline int
> remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart)
> {
> - if (hrtimer_is_queued(timer)) {
> - u8 state = timer->state;
> + u8 state = timer->state;
> +
> + if (state & HRTIMER_STATE_ENQUEUED) {
> int reprogram;
>
> /*
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On 1/2/20 3:06 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.93 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.93-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
---- 在 星期六, 2020-01-04 01:12:13 Pavel Machek <[email protected]> 撰写 ----
> Hi!
>
> > From: Chengguang Xu <[email protected]>
> >
> > [ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
> >
> > Setting softlimit larger than hardlimit seems meaningless
> > for disk quota but currently it is allowed. In this case,
> > there may be a bit of comfusion for users when they run
> > df comamnd to directory which has project quota.
> >
> > For example, we set 20M softlimit and 10M hardlimit of
> > block usage limit for project quota of test_dir(project id 123).
>
> > Signed-off-by: Chengguang Xu <[email protected]>
> > Reviewed-by: Chao Yu <[email protected]>
> > Signed-off-by: Jaegeuk Kim <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
> > ---
> > fs/f2fs/super.c | 20 ++++++++++++++------
> > 1 file changed, 14 insertions(+), 6 deletions(-)
> >
> > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> > index 7a9cc64f5ca3..662c7de58b99 100644
> > --- a/fs/f2fs/super.c
> > +++ b/fs/f2fs/super.c
> > @@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
> > return PTR_ERR(dquot);
> > spin_lock(&dquot->dq_dqb_lock);
> >
> > - limit = (dquot->dq_dqb.dqb_bsoftlimit ?
> > - dquot->dq_dqb.dqb_bsoftlimit :
> > - dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
> > + limit = 0;
> > + if (dquot->dq_dqb.dqb_bsoftlimit)
> > + limit = dquot->dq_dqb.dqb_bsoftlimit;
> > + if (dquot->dq_dqb.dqb_bhardlimit &&
> > + (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
> > + limit = dquot->dq_dqb.dqb_bhardlimit;
> > +
> > if (limit && buf->f_blocks > limit) {
>
> >> blocksize disappeared here. That can't be right.
>
> Plus, is this just obfuscated way of saying
>
> limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit, dquot->dq_dqb.dqb_bhardlimit)?
>
Please skip this patch from stable list, I'll send a revised patch to upstream.
Thanks.
On Fri, 3 Jan 2020 at 21:12, Greg Kroah-Hartman
<[email protected]> wrote:
>
> Now added to 4.14 and 4.19 queues, thanks!
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.93-rc3
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 9ecb5b1714ae62e5f10cc711b473d902b465735d
git describe: v4.19.92-115-g9ecb5b1714ae
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.92-115-g9ecb5b1714ae
No regressions (compared to build v4.19.92)
No fixes (compared to build v4.19.92)
Ran 24071 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* libhugetlbfs
* ltp-containers-tests
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On Sat, Jan 04, 2020 at 09:50:43AM +0800, Chengguang Xu wrote:
> ---- 在 星期六, 2020-01-04 01:12:13 Pavel Machek <[email protected]> 撰写 ----
> > Hi!
> >
> > > From: Chengguang Xu <[email protected]>
> > >
> > > [ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
> > >
> > > Setting softlimit larger than hardlimit seems meaningless
> > > for disk quota but currently it is allowed. In this case,
> > > there may be a bit of comfusion for users when they run
> > > df comamnd to directory which has project quota.
> > >
> > > For example, we set 20M softlimit and 10M hardlimit of
> > > block usage limit for project quota of test_dir(project id 123).
> >
> > > Signed-off-by: Chengguang Xu <[email protected]>
> > > Reviewed-by: Chao Yu <[email protected]>
> > > Signed-off-by: Jaegeuk Kim <[email protected]>
> > > Signed-off-by: Sasha Levin <[email protected]>
> > > ---
> > > fs/f2fs/super.c | 20 ++++++++++++++------
> > > 1 file changed, 14 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> > > index 7a9cc64f5ca3..662c7de58b99 100644
> > > --- a/fs/f2fs/super.c
> > > +++ b/fs/f2fs/super.c
> > > @@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
> > > return PTR_ERR(dquot);
> > > spin_lock(&dquot->dq_dqb_lock);
> > >
> > > - limit = (dquot->dq_dqb.dqb_bsoftlimit ?
> > > - dquot->dq_dqb.dqb_bsoftlimit :
> > > - dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
> > > + limit = 0;
> > > + if (dquot->dq_dqb.dqb_bsoftlimit)
> > > + limit = dquot->dq_dqb.dqb_bsoftlimit;
> > > + if (dquot->dq_dqb.dqb_bhardlimit &&
> > > + (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
> > > + limit = dquot->dq_dqb.dqb_bhardlimit;
> > > +
> > > if (limit && buf->f_blocks > limit) {
> >
> > >> blocksize disappeared here. That can't be right.
> >
> > Plus, is this just obfuscated way of saying
> >
> > limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit, dquot->dq_dqb.dqb_bhardlimit)?
> >
>
> Please skip this patch from stable list, I'll send a revised patch to upstream.
This patch is already in Linus's tree, so you can't send a "revised"
version, only one that applies on top of this one :)
That being said, I'll go drop this from the stable queues, thanks.
Please let us know when the fixed patch is in Linus's tree and we will
be glad to take both of them.
greg k-h
On Fri, Jan 03, 2020 at 09:46:24AM -0800, Guenter Roeck wrote:
> On Fri, Jan 03, 2020 at 04:41:56PM +0100, Greg Kroah-Hartman wrote:
> > On Fri, Jan 03, 2020 at 06:27:53AM -0800, Guenter Roeck wrote:
> > > On 1/2/20 2:06 PM, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.19.93 release.
> > > > There are 114 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
> > > > Anything received after that time might be too late.
> > > >
> > >
> > > Build results:
> > > total: 156 pass: 155 fail: 1
> > > Failed builds:
> > > sparc64:allmodconfig
> > > Qemu test results:
> > > total: 381 pass: 381 fail: 0
> > >
> > > ERROR: "of_irq_to_resource" [drivers/spi/spi-fsl-spi.ko] undefined!
> > >
> > > Caused by 3194d2533eff ("spi: fsl: don't map irq during probe")
> > > which is missing its fix, 63aa6a692595 ("spi: fsl: use platform_get_irq()
> > > instead of of_irq_to_resource()")
> >
> > Now added to 4.14 and 4.19 queues, thanks!
> >
> sparc64:allmodconfig builds now pass in both v4.14.y and v4.19.y queues.
Wonderful, thanks for letting me know and running all of these
builds/tests.
greg k-h
---- 在 星期六, 2020-01-04 19:53:08 Greg Kroah-Hartman <[email protected]> 撰写 ----
> On Sat, Jan 04, 2020 at 09:50:43AM +0800, Chengguang Xu wrote:
> > ---- 在 星期六, 2020-01-04 01:12:13 Pavel Machek <[email protected]> 撰写 ----
> > > Hi!
> > >
> > > > From: Chengguang Xu <[email protected]>
> > > >
> > > > [ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
> > > >
> > > > Setting softlimit larger than hardlimit seems meaningless
> > > > for disk quota but currently it is allowed. In this case,
> > > > there may be a bit of comfusion for users when they run
> > > > df comamnd to directory which has project quota.
> > > >
> > > > For example, we set 20M softlimit and 10M hardlimit of
> > > > block usage limit for project quota of test_dir(project id 123).
> > >
> > > > Signed-off-by: Chengguang Xu <[email protected]>
> > > > Reviewed-by: Chao Yu <[email protected]>
> > > > Signed-off-by: Jaegeuk Kim <[email protected]>
> > > > Signed-off-by: Sasha Levin <[email protected]>
> > > > ---
> > > > fs/f2fs/super.c | 20 ++++++++++++++------
> > > > 1 file changed, 14 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> > > > index 7a9cc64f5ca3..662c7de58b99 100644
> > > > --- a/fs/f2fs/super.c
> > > > +++ b/fs/f2fs/super.c
> > > > @@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
> > > > return PTR_ERR(dquot);
> > > > spin_lock(&dquot->dq_dqb_lock);
> > > >
> > > > - limit = (dquot->dq_dqb.dqb_bsoftlimit ?
> > > > - dquot->dq_dqb.dqb_bsoftlimit :
> > > > - dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
> > > > + limit = 0;
> > > > + if (dquot->dq_dqb.dqb_bsoftlimit)
> > > > + limit = dquot->dq_dqb.dqb_bsoftlimit;
> > > > + if (dquot->dq_dqb.dqb_bhardlimit &&
> > > > + (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
> > > > + limit = dquot->dq_dqb.dqb_bhardlimit;
> > > > +
> > > > if (limit && buf->f_blocks > limit) {
> > >
> > > >> blocksize disappeared here. That can't be right.
> > >
> > > Plus, is this just obfuscated way of saying
> > >
> > > limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit, dquot->dq_dqb.dqb_bhardlimit)?
> > >
> >
> > Please skip this patch from stable list, I'll send a revised patch to upstream.
>
> This patch is already in Linus's tree, so you can't send a "revised"
> version, only one that applies on top of this one :)
>
> That being said, I'll go drop this from the stable queues, thanks.
> Please let us know when the fixed patch is in Linus's tree and we will
> be glad to take both of them.
I got it, Thanks Greg!
On Fri, Jan 03, 2020 at 07:29:11PM +0100, Pavel Machek wrote:
>Hi!
>
>> From: Johannes Weiner <[email protected]>
>>
>> [ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]
>>
>> Currently, the drop_caches proc file and sysctl read back the last value
>> written, suggesting this is somehow a stateful setting instead of a
>> one-time command. Make it write-only, like e.g. compact_memory.
>
>I have no problem with that, but is it good idea for stable?
Usually I'd drop it, yes. In this case it seems like it made "real"
users interact with the switch incorrectly, which I parse as a bug.
>Plus, I seem to recall that drop_caches was somehow dangerous,
>debugging-only stuff, one should not use on production system. Did
>that get fixed in the meantime?
Sounds like it's being used in production, at scale, so I'd hope so :)
--
Thanks,
Sasha
---- 在 星期六, 2020-01-04 19:53:08 Greg Kroah-Hartman <[email protected]> 撰写 ----
> On Sat, Jan 04, 2020 at 09:50:43AM +0800, Chengguang Xu wrote:
> > ---- 在 星期六, 2020-01-04 01:12:13 Pavel Machek <[email protected]> 撰写 ----
> > > Hi!
> > >
> > > > From: Chengguang Xu <[email protected]>
> > > >
> > > > [ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
> > > >
> > > > Setting softlimit larger than hardlimit seems meaningless
> > > > for disk quota but currently it is allowed. In this case,
> > > > there may be a bit of comfusion for users when they run
> > > > df comamnd to directory which has project quota.
> > > >
> > > > For example, we set 20M softlimit and 10M hardlimit of
> > > > block usage limit for project quota of test_dir(project id 123).
> > >
> > > > Signed-off-by: Chengguang Xu <[email protected]>
> > > > Reviewed-by: Chao Yu <[email protected]>
> > > > Signed-off-by: Jaegeuk Kim <[email protected]>
> > > > Signed-off-by: Sasha Levin <[email protected]>
> > > > ---
> > > > fs/f2fs/super.c | 20 ++++++++++++++------
> > > > 1 file changed, 14 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> > > > index 7a9cc64f5ca3..662c7de58b99 100644
> > > > --- a/fs/f2fs/super.c
> > > > +++ b/fs/f2fs/super.c
> > > > @@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
> > > > return PTR_ERR(dquot);
> > > > spin_lock(&dquot->dq_dqb_lock);
> > > >
> > > > - limit = (dquot->dq_dqb.dqb_bsoftlimit ?
> > > > - dquot->dq_dqb.dqb_bsoftlimit :
> > > > - dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
> > > > + limit = 0;
> > > > + if (dquot->dq_dqb.dqb_bsoftlimit)
> > > > + limit = dquot->dq_dqb.dqb_bsoftlimit;
> > > > + if (dquot->dq_dqb.dqb_bhardlimit &&
> > > > + (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
> > > > + limit = dquot->dq_dqb.dqb_bhardlimit;
> > > > +
> > > > if (limit && buf->f_blocks > limit) {
> > >
> > > >> blocksize disappeared here. That can't be right.
> > >
> > > Plus, is this just obfuscated way of saying
> > >
> > > limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit, dquot->dq_dqb.dqb_bhardlimit)?
> > >
> >
> > Please skip this patch from stable list, I'll send a revised patch to upstream.
>
> This patch is already in Linus's tree, so you can't send a "revised"
> version, only one that applies on top of this one :)
>
> That being said, I'll go drop this from the stable queues, thanks.
> Please let us know when the fixed patch is in Linus's tree and we will
> be glad to take both of them.
>
Hi Greg, Sasha
Now the fix patch has been in Linus's tree, you can add below three patches together to backport list.
commit 909110c060f22e6 "f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()"
commit acdf2172172a511 "f2fs: fix miscounted block limit in f2fs_statfs_project()"
commit bf2cbd3c57159c2 "f2fs: code cleanup for f2fs_statfs_project()"
Thanks,
Chengguang
On Sat, Feb 01, 2020 at 05:24:25PM +0800, Chengguang Xu wrote:
> ---- 在 星期六, 2020-01-04 19:53:08 Greg Kroah-Hartman <[email protected]> 撰写 ----
> > On Sat, Jan 04, 2020 at 09:50:43AM +0800, Chengguang Xu wrote:
> > > ---- 在 星期六, 2020-01-04 01:12:13 Pavel Machek <[email protected]> 撰写 ----
> > > > Hi!
> > > >
> > > > > From: Chengguang Xu <[email protected]>
> > > > >
> > > > > [ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]
> > > > >
> > > > > Setting softlimit larger than hardlimit seems meaningless
> > > > > for disk quota but currently it is allowed. In this case,
> > > > > there may be a bit of comfusion for users when they run
> > > > > df comamnd to directory which has project quota.
> > > > >
> > > > > For example, we set 20M softlimit and 10M hardlimit of
> > > > > block usage limit for project quota of test_dir(project id 123).
> > > >
> > > > > Signed-off-by: Chengguang Xu <[email protected]>
> > > > > Reviewed-by: Chao Yu <[email protected]>
> > > > > Signed-off-by: Jaegeuk Kim <[email protected]>
> > > > > Signed-off-by: Sasha Levin <[email protected]>
> > > > > ---
> > > > > fs/f2fs/super.c | 20 ++++++++++++++------
> > > > > 1 file changed, 14 insertions(+), 6 deletions(-)
> > > > >
> > > > > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> > > > > index 7a9cc64f5ca3..662c7de58b99 100644
> > > > > --- a/fs/f2fs/super.c
> > > > > +++ b/fs/f2fs/super.c
> > > > > @@ -1148,9 +1148,13 @@ static int f2fs_statfs_project(struct super_block *sb,
> > > > > return PTR_ERR(dquot);
> > > > > spin_lock(&dquot->dq_dqb_lock);
> > > > >
> > > > > - limit = (dquot->dq_dqb.dqb_bsoftlimit ?
> > > > > - dquot->dq_dqb.dqb_bsoftlimit :
> > > > > - dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
> > > > > + limit = 0;
> > > > > + if (dquot->dq_dqb.dqb_bsoftlimit)
> > > > > + limit = dquot->dq_dqb.dqb_bsoftlimit;
> > > > > + if (dquot->dq_dqb.dqb_bhardlimit &&
> > > > > + (!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
> > > > > + limit = dquot->dq_dqb.dqb_bhardlimit;
> > > > > +
> > > > > if (limit && buf->f_blocks > limit) {
> > > >
> > > > >> blocksize disappeared here. That can't be right.
> > > >
> > > > Plus, is this just obfuscated way of saying
> > > >
> > > > limit = min_not_zero(dquot->dq_dqb.dqb_bsoftlimit, dquot->dq_dqb.dqb_bhardlimit)?
> > > >
> > >
> > > Please skip this patch from stable list, I'll send a revised patch to upstream.
> >
> > This patch is already in Linus's tree, so you can't send a "revised"
> > version, only one that applies on top of this one :)
> >
> > That being said, I'll go drop this from the stable queues, thanks.
> > Please let us know when the fixed patch is in Linus's tree and we will
> > be glad to take both of them.
> >
>
>
> Hi Greg, Sasha
>
> Now the fix patch has been in Linus's tree, you can add below three patches together to backport list.
>
>
> commit 909110c060f22e6 "f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()"
> commit acdf2172172a511 "f2fs: fix miscounted block limit in f2fs_statfs_project()"
> commit bf2cbd3c57159c2 "f2fs: code cleanup for f2fs_statfs_project()"
All now queued up, thanks for letting us know.
greg k-h