This series converts the printk based logging macros in
drm/i915/display/intel_display.c to the new struct drm_device based
logging macros. This change was split into four for manageability and
due to the size of drm/i915/display/intel_display.c.
Wambui Karuga (4):
drm/i915/display: conversion to new logging macros part 1
drm/i915/display: conversion to new logging macros part 2
drm/i915/display: conversion to new logging macros part 3
drm/i915/display: convert to new logging macros part 4.
drivers/gpu/drm/i915/display/intel_display.c | 1021 ++++++++++--------
1 file changed, 596 insertions(+), 425 deletions(-)
--
2.24.1
This patch provides the final conversion of most of the printk based
logging macros instances in drm/i915/display/intel_display.c to the
struct drm_device based logging macros. The struct drm_i915_private
device is extracted from various intel types and used in the new logging
macros.
Signed-off-by: Wambui Karuga <[email protected]>
---
drivers/gpu/drm/i915/display/intel_display.c | 167 +++++++++++--------
1 file changed, 102 insertions(+), 65 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 58d5333d3ad9..b871cdd9f1cf 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3890,6 +3890,8 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
{
+ struct drm_i915_private *i915 =
+ to_i915(plane_state->uapi.plane->dev);
const struct drm_framebuffer *fb = plane_state->hw.fb;
unsigned int rotation = plane_state->hw.rotation;
int uv_plane = 1;
@@ -3907,8 +3909,9 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
/* FIXME not quite sure how/if these apply to the chroma plane */
if (w > max_width || h > max_height) {
- DRM_DEBUG_KMS("CbCr source size %dx%d too big (limit %dx%d)\n",
- w, h, max_width, max_height);
+ drm_dbg_kms(&i915->drm,
+ "CbCr source size %dx%d too big (limit %dx%d)\n",
+ w, h, max_width, max_height);
return -EINVAL;
}
@@ -3937,7 +3940,8 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
if (x != plane_state->color_plane[ccs_plane].x ||
y != plane_state->color_plane[ccs_plane].y) {
- DRM_DEBUG_KMS("Unable to find suitable display surface offset due to CCS\n");
+ drm_dbg_kms(&i915->drm,
+ "Unable to find suitable display surface offset due to CCS\n");
return -EINVAL;
}
}
@@ -7621,10 +7625,10 @@ static void intel_connector_verify_state(struct intel_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct intel_connector *connector = to_intel_connector(conn_state->connector);
+ struct drm_i915_private *i915 = to_i915(connector->base.dev);
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
- connector->base.base.id,
- connector->base.name);
+ drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s]\n",
+ connector->base.base.id, connector->base.name);
if (connector->get_hw_state(connector)) {
struct intel_encoder *encoder = connector->encoder;
@@ -7745,6 +7749,7 @@ static int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *i915 = to_i915(dev);
const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
int lane, link_bw, fdi_dotclock, ret;
bool needs_recompute = false;
@@ -7757,7 +7762,7 @@ static int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
* Hence the bw of each lane in terms of the mode signal
* is:
*/
- link_bw = intel_fdi_link_freq(to_i915(dev), pipe_config);
+ link_bw = intel_fdi_link_freq(i915, pipe_config);
fdi_dotclock = adjusted_mode->crtc_clock;
@@ -7775,8 +7780,9 @@ static int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
pipe_config->pipe_bpp -= 2*3;
- DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
- pipe_config->pipe_bpp);
+ drm_dbg_kms(&i915->drm,
+ "fdi link bw constraint, reducing pipe bpp to %i\n",
+ pipe_config->pipe_bpp);
needs_recompute = true;
pipe_config->bw_constrained = true;
@@ -8195,6 +8201,7 @@ static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_sta
void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_set m_n)
{
const struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
+ struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
if (m_n == M1_N1) {
dp_m_n = &crtc_state->dp_m_n;
@@ -8207,7 +8214,7 @@ void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_s
*/
dp_m_n = &crtc_state->dp_m2_n2;
} else {
- DRM_ERROR("Unsupported divider value\n");
+ drm_err(&i915->drm, "Unsupported divider value\n");
return;
}
@@ -9031,6 +9038,7 @@ static int chv_crtc_compute_clock(struct intel_crtc *crtc,
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_chv;
+ struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
@@ -9038,7 +9046,7 @@ static int chv_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
@@ -9052,6 +9060,7 @@ static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_vlv;
+ struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
@@ -9059,7 +9068,7 @@ static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
@@ -11251,10 +11260,11 @@ static int intel_check_cursor(struct intel_crtc_state *crtc_state,
struct intel_plane_state *plane_state)
{
const struct drm_framebuffer *fb = plane_state->hw.fb;
+ struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
int ret;
if (fb && fb->modifier != DRM_FORMAT_MOD_LINEAR) {
- DRM_DEBUG_KMS("cursor cannot be tiled\n");
+ drm_dbg_kms(&i915->drm, "cursor cannot be tiled\n");
return -EINVAL;
}
@@ -11325,6 +11335,7 @@ static int i845_check_cursor(struct intel_crtc_state *crtc_state,
struct intel_plane_state *plane_state)
{
const struct drm_framebuffer *fb = plane_state->hw.fb;
+ struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
int ret;
ret = intel_check_cursor(crtc_state, plane_state);
@@ -11337,9 +11348,10 @@ static int i845_check_cursor(struct intel_crtc_state *crtc_state,
/* Check for which cursor types we support */
if (!i845_cursor_size_ok(plane_state)) {
- DRM_DEBUG("Cursor dimension %dx%d not supported\n",
- drm_rect_width(&plane_state->uapi.dst),
- drm_rect_height(&plane_state->uapi.dst));
+ drm_dbg_kms(&i915->drm,
+ "Cursor dimension %dx%d not supported\n",
+ drm_rect_width(&plane_state->uapi.dst),
+ drm_rect_height(&plane_state->uapi.dst));
return -EINVAL;
}
@@ -11353,8 +11365,8 @@ static int i845_check_cursor(struct intel_crtc_state *crtc_state,
case 2048:
break;
default:
- DRM_DEBUG_KMS("Invalid cursor stride (%u)\n",
- fb->pitches[0]);
+ drm_dbg_kms(&i915->drm, "Invalid cursor stride (%u)\n",
+ fb->pitches[0]);
return -EINVAL;
}
@@ -11920,20 +11932,22 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
{
struct intel_encoder *intel_encoder =
intel_attached_encoder(connector);
+ struct drm_i915_private *i915 = to_i915(intel_encoder->base.dev);
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_atomic_state *state = old->restore_state;
int ret;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
- connector->base.id, connector->name,
- encoder->base.id, encoder->name);
+ drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+ connector->base.id, connector->name,
+ encoder->base.id, encoder->name);
if (!state)
return;
ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
if (ret)
- DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
+ drm_dbg_kms(&i915->drm,
+ "Couldn't release load detect pipe: %i\n", ret);
drm_atomic_state_put(state);
}
@@ -12704,6 +12718,7 @@ compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
struct intel_crtc_state *pipe_config)
{
struct drm_connector *connector = conn_state->connector;
+ struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
const struct drm_display_info *info = &connector->display_info;
int bpp;
@@ -12725,11 +12740,12 @@ compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
}
if (bpp < pipe_config->pipe_bpp) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Limiting display bpp to %d instead of "
- "EDID bpp %d, requested bpp %d, max platform bpp %d\n",
- connector->base.id, connector->name,
- bpp, 3 * info->bpc, 3 * conn_state->max_requested_bpc,
- pipe_config->pipe_bpp);
+ drm_dbg_kms(&i915->drm,
+ "[CONNECTOR:%d:%s] Limiting display bpp to %d instead of "
+ "EDID bpp %d, requested bpp %d, max platform bpp %d\n",
+ connector->base.id, connector->name, bpp,
+ 3 * info->bpc, 3 * conn_state->max_requested_bpc,
+ pipe_config->pipe_bpp);
pipe_config->pipe_bpp = bpp;
}
@@ -12789,10 +12805,13 @@ intel_dump_m_n_config(const struct intel_crtc_state *pipe_config,
const char *id, unsigned int lane_count,
const struct intel_link_m_n *m_n)
{
- DRM_DEBUG_KMS("%s: lanes: %i; gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
- id, lane_count,
- m_n->gmch_m, m_n->gmch_n,
- m_n->link_m, m_n->link_n, m_n->tu);
+ struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
+
+ drm_dbg_kms(&i915->drm,
+ "%s: lanes: %i; gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
+ id, lane_count,
+ m_n->gmch_m, m_n->gmch_n,
+ m_n->link_m, m_n->link_n, m_n->tu);
}
static void
@@ -12868,27 +12887,31 @@ static const char *output_formats(enum intel_output_format format)
static void intel_dump_plane_state(const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
+ struct drm_i915_private *i915 = to_i915(plane->base.dev);
const struct drm_framebuffer *fb = plane_state->hw.fb;
struct drm_format_name_buf format_name;
if (!fb) {
- DRM_DEBUG_KMS("[PLANE:%d:%s] fb: [NOFB], visible: %s\n",
- plane->base.base.id, plane->base.name,
- yesno(plane_state->uapi.visible));
+ drm_dbg_kms(&i915->drm,
+ "[PLANE:%d:%s] fb: [NOFB], visible: %s\n",
+ plane->base.base.id, plane->base.name,
+ yesno(plane_state->uapi.visible));
return;
}
- DRM_DEBUG_KMS("[PLANE:%d:%s] fb: [FB:%d] %ux%u format = %s, visible: %s\n",
- plane->base.base.id, plane->base.name,
- fb->base.id, fb->width, fb->height,
- drm_get_format_name(fb->format->format, &format_name),
- yesno(plane_state->uapi.visible));
- DRM_DEBUG_KMS("\trotation: 0x%x, scaler: %d\n",
- plane_state->hw.rotation, plane_state->scaler_id);
+ drm_dbg_kms(&i915->drm,
+ "[PLANE:%d:%s] fb: [FB:%d] %ux%u format = %s, visible: %s\n",
+ plane->base.base.id, plane->base.name,
+ fb->base.id, fb->width, fb->height,
+ drm_get_format_name(fb->format->format, &format_name),
+ yesno(plane_state->uapi.visible));
+ drm_dbg_kms(&i915->drm, "\trotation: 0x%x, scaler: %d\n",
+ plane_state->hw.rotation, plane_state->scaler_id);
if (plane_state->uapi.visible)
- DRM_DEBUG_KMS("\tsrc: " DRM_RECT_FP_FMT " dst: " DRM_RECT_FMT "\n",
- DRM_RECT_FP_ARG(&plane_state->uapi.src),
- DRM_RECT_ARG(&plane_state->uapi.dst));
+ drm_dbg_kms(&i915->drm,
+ "\tsrc: " DRM_RECT_FP_FMT " dst: " DRM_RECT_FMT "\n",
+ DRM_RECT_FP_ARG(&plane_state->uapi.src),
+ DRM_RECT_ARG(&plane_state->uapi.dst));
}
static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
@@ -13172,6 +13195,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
{
struct drm_crtc *crtc = pipe_config->uapi.crtc;
struct drm_atomic_state *state = pipe_config->uapi.state;
+ struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
struct intel_encoder *encoder;
struct drm_connector *connector;
struct drm_connector_state *connector_state;
@@ -13221,7 +13245,8 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
encoder = to_intel_encoder(connector_state->best_encoder);
if (!check_single_encoder_cloning(state, to_intel_crtc(crtc), encoder)) {
- DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
+ drm_dbg_kms(&i915->drm,
+ "rejecting invalid cloning configuration\n");
return -EINVAL;
}
@@ -13275,8 +13300,8 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
ret = icl_compute_port_sync_crtc_state(connector, pipe_config,
num_tiled_conns);
if (ret) {
- DRM_DEBUG_KMS("Cannot assign Sync Mode CRTCs: %d\n",
- ret);
+ drm_dbg_kms(&i915->drm,
+ "Cannot assign Sync Mode CRTCs: %d\n", ret);
return ret;
}
@@ -13285,8 +13310,9 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
connector_state);
if (ret < 0) {
if (ret != -EDEADLK)
- DRM_DEBUG_KMS("Encoder config failure: %d\n",
- ret);
+ drm_dbg_kms(&i915->drm,
+ "Encoder config failure: %d\n",
+ ret);
return ret;
}
}
@@ -13301,7 +13327,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
if (ret == -EDEADLK)
return ret;
if (ret < 0) {
- DRM_DEBUG_KMS("CRTC fixup failed\n");
+ drm_dbg_kms(&i915->drm, "CRTC fixup failed\n");
return ret;
}
@@ -13309,7 +13335,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
if (WARN(!retry, "loop in pipe configuration computation\n"))
return -EINVAL;
- DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
+ drm_dbg_kms(&i915->drm, "CRTC bw constrained, retrying\n");
retry = false;
goto encoder_retry;
}
@@ -13320,8 +13346,9 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
*/
pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
!pipe_config->dither_force_disable;
- DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
- base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
+ drm_dbg_kms(&i915->drm,
+ "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
+ base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
/*
* Make drm_calc_timestamping_constants in
@@ -13429,6 +13456,7 @@ static void __printf(4, 5)
pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
const char *name, const char *format, ...)
{
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
struct va_format vaf;
va_list args;
@@ -13437,11 +13465,12 @@ pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
vaf.va = &args;
if (fastset)
- DRM_DEBUG_KMS("[CRTC:%d:%s] fastset mismatch in %s %pV\n",
- crtc->base.base.id, crtc->base.name, name, &vaf);
+ drm_dbg_kms(&i915->drm,
+ "[CRTC:%d:%s] fastset mismatch in %s %pV\n",
+ crtc->base.base.id, crtc->base.name, name, &vaf);
else
- DRM_ERROR("[CRTC:%d:%s] mismatch in %s %pV\n",
- crtc->base.base.id, crtc->base.name, name, &vaf);
+ drm_err(&i915->drm, "[CRTC:%d:%s] mismatch in %s %pV\n",
+ crtc->base.base.id, crtc->base.name, name, &vaf);
va_end(args);
}
@@ -14519,8 +14548,9 @@ static int intel_atomic_check_planes(struct intel_atomic_state *state,
for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
ret = intel_plane_atomic_check(state, plane);
if (ret) {
- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic driver check failed\n",
- plane->base.base.id, plane->base.name);
+ drm_dbg_atomic(&dev_priv->drm,
+ "[PLANE:%d:%s] atomic driver check failed\n",
+ plane->base.base.id, plane->base.name);
return ret;
}
}
@@ -14565,15 +14595,18 @@ static int intel_atomic_check_planes(struct intel_atomic_state *state,
static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
struct intel_crtc_state *crtc_state;
struct intel_crtc *crtc;
int i;
for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
int ret = intel_crtc_atomic_check(state, crtc);
+
if (ret) {
- DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic driver check failed\n",
- crtc->base.base.id, crtc->base.name);
+ drm_dbg_atomic(&i915->drm,
+ "[CRTC:%d:%s] atomic driver check failed\n",
+ crtc->base.base.id, crtc->base.name);
return ret;
}
}
@@ -15182,6 +15215,7 @@ static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
struct intel_crtc_state *old_crtc_state,
struct intel_crtc_state *new_crtc_state)
{
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
struct intel_crtc_state *new_slave_crtc_state =
intel_atomic_get_new_crtc_state(state, slave_crtc);
@@ -15191,9 +15225,10 @@ static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
WARN_ON(!slave_crtc || !new_slave_crtc_state ||
!old_slave_crtc_state);
- DRM_DEBUG_KMS("Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
- crtc->base.base.id, crtc->base.name, slave_crtc->base.base.id,
- slave_crtc->base.name);
+ drm_dbg_kms(&i915->drm,
+ "Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
+ crtc->base.base.id, crtc->base.name,
+ slave_crtc->base.base.id, slave_crtc->base.name);
/* Enable seq for slave with with DP_TP_CTL left Idle until the
* master is ready
@@ -16981,9 +17016,11 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
unsigned int *handle)
{
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ struct drm_i915_private *i915 = to_i915(obj->base.dev);
if (obj->userptr.mm) {
- DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+ drm_dbg(&i915->drm,
+ "attempting to use a userptr for a framebuffer, denied\n");
return -EINVAL;
}
--
2.24.1
On Thu, 16 Jan 2020, Wambui Karuga <[email protected]> wrote:
> This series converts the printk based logging macros in
> drm/i915/display/intel_display.c to the new struct drm_device based
> logging macros. This change was split into four for manageability and
> due to the size of drm/i915/display/intel_display.c.
Please still write more descriptive commit messages than "part N".
What are your basing your patches on? Our CI uses drm-tip, and it's
failing to apply the patches.
BR,
Jani.
>
> Wambui Karuga (4):
> drm/i915/display: conversion to new logging macros part 1
> drm/i915/display: conversion to new logging macros part 2
> drm/i915/display: conversion to new logging macros part 3
> drm/i915/display: convert to new logging macros part 4.
>
> drivers/gpu/drm/i915/display/intel_display.c | 1021 ++++++++++--------
> 1 file changed, 596 insertions(+), 425 deletions(-)
--
Jani Nikula, Intel Open Source Graphics Center
On Fri, 17 Jan 2020, Jani Nikula wrote:
> On Thu, 16 Jan 2020, Wambui Karuga <[email protected]> wrote:
>> This series converts the printk based logging macros in
>> drm/i915/display/intel_display.c to the new struct drm_device based
>> logging macros. This change was split into four for manageability and
>> due to the size of drm/i915/display/intel_display.c.
>
> Please still write more descriptive commit messages than "part N".
>
What would be a more descriptive subject line? I wasn't really sure about
the subject line since the series is for the same file - which is why I
went with "part N".
> What are your basing your patches on? Our CI uses
drm-tip, and it's > failing to apply the patches.
>
I'm using drm-tip, but I can rebase and try again.
Thanks.
wambui.
> BR,
> Jani.
>
>
>
>>
>> Wambui Karuga (4):
>> drm/i915/display: conversion to new logging macros part 1
>> drm/i915/display: conversion to new logging macros part 2
>> drm/i915/display: conversion to new logging macros part 3
>> drm/i915/display: convert to new logging macros part 4.
>>
>> drivers/gpu/drm/i915/display/intel_display.c | 1021 ++++++++++--------
>> 1 file changed, 596 insertions(+), 425 deletions(-)
>
> --
> Jani Nikula, Intel Open Source Graphics Center
>