This is the start of the stable review cycle for the 4.14.166 release.
There are 71 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.166-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.166-rc1
Kai Li <[email protected]>
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
Nick Desaulniers <[email protected]>
hexagon: work around compiler crash
Nick Desaulniers <[email protected]>
hexagon: parenthesize registers in asm predicates
[email protected] <[email protected]>
ioat: ioat_alloc_ring() failure handling.
John Stultz <[email protected]>
dmaengine: k3dma: Avoid null pointer traversal
Jouni Hogander <[email protected]>
MIPS: Prevent link failure with kcov instrumentation
Vladimir Kondratiev <[email protected]>
mips: cacheinfo: report shared CPU map
Mathieu Desnoyers <[email protected]>
rseq/selftests: Turn off timeout setting
Varun Prakash <[email protected]>
scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()
Johnson CH Chen (陳昭勳) <[email protected]>
gpio: mpc8xxx: Add platform device to gpiochip->parent
Kars de Jong <[email protected]>
rtc: msm6242: Fix reading of 10-hour digit
Chao Yu <[email protected]>
f2fs: fix potential overflow
Nathan Chancellor <[email protected]>
rtlwifi: Remove unnecessary NULL check in rtl_regd_init
Mans Rullgard <[email protected]>
spi: atmel: fix handling of cs_change set on non-last xfer
Sergei Shtylyov <[email protected]>
mtd: spi-nor: fix silent truncation in spi_nor_read_raw()
Sergei Shtylyov <[email protected]>
mtd: spi-nor: fix silent truncation in spi_nor_read()
Seung-Woo Kim <[email protected]>
media: exynos4-is: Fix recursive locking in isp_video_release()
Janusz Krzysztofik <[email protected]>
media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support
Janusz Krzysztofik <[email protected]>
media: ov6650: Fix some format attributes not under control
Janusz Krzysztofik <[email protected]>
media: ov6650: Fix incorrect use of JPEG colorspace
Peng Fan <[email protected]>
tty: serial: pch_uart: correct usage of dma_unmap_sg
Peng Fan <[email protected]>
tty: serial: imx: use the sg count from dma_map_sg
Oliver O'Halloran <[email protected]>
powerpc/powernv: Disable native PCIe port management
Bjorn Helgaas <[email protected]>
PCI/PTM: Remove spurious "d" from granularity message
Arnd Bergmann <[email protected]>
compat_ioctl: handle SIOCOUTQNSD
Arnd Bergmann <[email protected]>
af_unix: add compat_ioctl support
Loic Poulain <[email protected]>
arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD
Arnd Bergmann <[email protected]>
scsi: sd: enable compat ioctls for sed-opal
Andy Shevchenko <[email protected]>
pinctrl: lewisburg: Update pin list according to v1.1v6
Colin Ian King <[email protected]>
pinctl: ti: iodelay: fix error checking on pinctrl_count_index_with_args call
Marian Mihailescu <[email protected]>
clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume
Alexander Usyskin <[email protected]>
mei: fix modalias documentation
Alexandru Ardelean <[email protected]>
iio: imu: adis16480: assign bias value only if operation succeeded
Trond Myklebust <[email protected]>
NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
Chuck Lever <[email protected]>
xprtrdma: Fix completion wait during device removal
Jian-Hong Pan <[email protected]>
platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
Xiang Chen <[email protected]>
scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
James Bottomley <[email protected]>
scsi: enclosure: Fix stale device oops with hot replug
Dirk Mueller <[email protected]>
arm64: Check for errata before evaluating cpu features
Mark Rutland <[email protected]>
arm64: add sentinel to kpti_safe_list
Bart Van Assche <[email protected]>
RDMA/srpt: Report the SCSI residual to the initiator
Leon Romanovsky <[email protected]>
RDMA/mlx5: Return proper error value
Goldwyn Rodrigues <[email protected]>
btrfs: simplify inode locking for RWF_NOWAIT
Nathan Chancellor <[email protected]>
cifs: Adjust indentation in smb2_open_file
Taehee Yoo <[email protected]>
hsr: reset network header when supervision frame is created
Geert Uytterhoeven <[email protected]>
gpio: Fix error message on out-of-range GPIO in lookup table
Jon Derrick <[email protected]>
iommu: Remove device link to group on failure
Swapna Manupati <[email protected]>
gpio: zynq: Fix for bug in zynq_gpio_restore_context API
Olivier Moysan <[email protected]>
ASoC: stm32: spdifrx: fix race condition in irq handler
Olivier Moysan <[email protected]>
ASoC: stm32: spdifrx: fix inconsistent lock state
Selvin Xavier <[email protected]>
RDMA/bnxt_re: Fix Send Work Entry state check while polling completions
Ran Bi <[email protected]>
rtc: mt6397: fix alarm register overwrite
Tyler Hicks <[email protected]>
drm/i915: Fix use-after-free when destroying GEM context
YueHaibing <[email protected]>
dccp: Fix memleak in __feat_register_sp
Navid Emamdoost <[email protected]>
iwlwifi: dbg_ini: fix memory leak in alloc_sgtable
Navid Emamdoost <[email protected]>
wimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle
Navid Emamdoost <[email protected]>
wimax: i2400: fix memory leak
ZhangXiaoxu <[email protected]>
cifs: Fix lease buffer length error
Vandana BN <[email protected]>
media: usb:zr364xx:Fix KASAN:null-ptr-deref Read in zr364xx_vidioc_querycap
Jouni Malinen <[email protected]>
mac80211: Do not send Layer 2 Update frame before authorization
Dedy Lansky <[email protected]>
cfg80211/mac80211: make ieee80211_send_layer2_update a public function
Laura Abbott <[email protected]>
arm64: Make sure permission updates happen for pmd/pud
Will Deacon <[email protected]>
arm64: Enforce BBM for huge IO/VMAP mappings
Ben Hutchings <[email protected]>
arm64: mm: Change page table pointer name in p[md]_set_huge()
Kristina Martsenko <[email protected]>
arm64: don't open code page table entry creation
Sanjay Konduri <[email protected]>
rsi: add fix for crash during assertions
Arnd Bergmann <[email protected]>
fs/select: avoid clang stack usage warning
Arnd Bergmann <[email protected]>
ethtool: reduce stack usage with clang
Jiri Kosina <[email protected]>
HID: hidraw, uhid: Always report EPOLLOUT
Marcel Holtmann <[email protected]>
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
Fabian Henneke <[email protected]>
hidraw: Return EPOLLOUT from hidraw_poll
-------------
Diffstat:
Documentation/ABI/testing/sysfs-bus-mei | 2 +-
Makefile | 4 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 +
arch/arm64/include/asm/kvm_mmu.h | 5 +
arch/arm64/include/asm/pgtable.h | 1 +
arch/arm64/kernel/cpufeature.c | 5 +-
arch/arm64/kernel/hibernate.c | 3 +-
arch/arm64/mm/mmu.c | 32 +++-
arch/hexagon/include/asm/atomic.h | 8 +-
arch/hexagon/include/asm/bitops.h | 8 +-
arch/hexagon/include/asm/cmpxchg.h | 2 +-
arch/hexagon/include/asm/futex.h | 6 +-
arch/hexagon/include/asm/spinlock.h | 20 +--
arch/hexagon/kernel/stacktrace.c | 4 +-
arch/hexagon/kernel/vm_entry.S | 2 +-
arch/mips/boot/compressed/Makefile | 3 +
arch/mips/kernel/cacheinfo.c | 27 +++-
arch/powerpc/platforms/powernv/pci.c | 17 ++
drivers/clk/samsung/clk-exynos5420.c | 2 +
drivers/dma/ioat/dma.c | 3 +-
drivers/dma/k3dma.c | 12 +-
drivers/gpio/gpio-mpc8xxx.c | 1 +
drivers/gpio/gpio-zynq.c | 8 +-
drivers/gpio/gpiolib.c | 5 +-
drivers/gpu/drm/i915/i915_gem_context.c | 13 +-
drivers/hid/hidraw.c | 7 +-
drivers/hid/uhid.c | 5 +-
drivers/iio/imu/adis16480.c | 6 +-
drivers/infiniband/hw/bnxt_re/qplib_fp.c | 12 +-
drivers/infiniband/hw/mlx5/mr.c | 2 +-
drivers/infiniband/ulp/srpt/ib_srpt.c | 24 +++
drivers/iommu/iommu.c | 1 +
drivers/media/i2c/ov6650.c | 72 ++++++---
drivers/media/platform/exynos4-is/fimc-isp-video.c | 2 +-
drivers/media/usb/zr364xx/zr364xx.c | 3 +-
drivers/misc/enclosure.c | 3 +-
drivers/mtd/spi-nor/spi-nor.c | 4 +-
drivers/net/wimax/i2400m/op-rfkill.c | 1 +
drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 1 +
drivers/net/wireless/realtek/rtlwifi/regd.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 1 +
drivers/pci/pcie/ptm.c | 2 +-
drivers/pinctrl/intel/pinctrl-lewisburg.c | 171 +++++++++++----------
drivers/pinctrl/ti/pinctrl-ti-iodelay.c | 2 +-
drivers/platform/x86/asus-wmi.c | 8 +-
drivers/rtc/rtc-msm6242.c | 3 +-
drivers/rtc/rtc-mt6397.c | 47 ++++--
drivers/scsi/cxgbi/libcxgbi.c | 3 +-
drivers/scsi/sd.c | 18 ++-
drivers/spi/spi-atmel.c | 10 +-
drivers/tty/serial/imx.c | 2 +-
drivers/tty/serial/pch_uart.c | 5 +-
fs/btrfs/file.c | 5 +-
fs/cifs/smb2file.c | 2 +-
fs/cifs/smb2pdu.c | 1 +
fs/f2fs/data.c | 2 +-
fs/f2fs/file.c | 2 +-
fs/nfs/nfs4proc.c | 4 +-
fs/ocfs2/journal.c | 8 +
include/linux/poll.h | 4 +
include/net/cfg80211.h | 11 ++
net/core/ethtool.c | 16 +-
net/dccp/feat.c | 7 +-
net/hsr/hsr_device.c | 2 +
net/mac80211/cfg.c | 58 +------
net/mac80211/sta_info.c | 4 +
net/socket.c | 1 +
net/sunrpc/xprtrdma/verbs.c | 2 +-
net/unix/af_unix.c | 19 +++
net/wireless/util.c | 45 ++++++
sound/soc/stm/stm32_spdifrx.c | 36 +++--
tools/testing/selftests/rseq/settings | 1 +
72 files changed, 540 insertions(+), 302 deletions(-)
From: Andy Shevchenko <[email protected]>
commit e66ff71fd0dba36a53f91f39e4da6c7b84764f2e upstream.
Version 1.1v6 of pin list has some changes in pin names for Intel Lewisburg.
Update the driver accordingly.
Note, it reveals the bug in the driver that misses two pins in GPP_L and
has rather two extra ones. That's why the ordering of some groups is changed.
Fixes: e480b745386e ("pinctrl: intel: Add Intel Lewisburg GPIO support")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/intel/pinctrl-lewisburg.c | 171 +++++++++++++++---------------
1 file changed, 86 insertions(+), 85 deletions(-)
--- a/drivers/pinctrl/intel/pinctrl-lewisburg.c
+++ b/drivers/pinctrl/intel/pinctrl-lewisburg.c
@@ -34,6 +34,7 @@
.npins = ((e) - (s) + 1), \
}
+/* Lewisburg */
static const struct pinctrl_pin_desc lbg_pins[] = {
/* GPP_A */
PINCTRL_PIN(0, "RCINB"),
@@ -73,7 +74,7 @@ static const struct pinctrl_pin_desc lbg
PINCTRL_PIN(33, "SRCCLKREQB_4"),
PINCTRL_PIN(34, "SRCCLKREQB_5"),
PINCTRL_PIN(35, "GPP_B_11"),
- PINCTRL_PIN(36, "GLB_RST_WARN_N"),
+ PINCTRL_PIN(36, "SLP_S0B"),
PINCTRL_PIN(37, "PLTRSTB"),
PINCTRL_PIN(38, "SPKR"),
PINCTRL_PIN(39, "GPP_B_15"),
@@ -186,96 +187,96 @@ static const struct pinctrl_pin_desc lbg
PINCTRL_PIN(141, "GBE_PCI_DIS"),
PINCTRL_PIN(142, "GBE_LAN_DIS"),
PINCTRL_PIN(143, "GPP_I_10"),
- PINCTRL_PIN(144, "GPIO_RCOMP_3P3"),
/* GPP_J */
- PINCTRL_PIN(145, "GBE_LED_0_0"),
- PINCTRL_PIN(146, "GBE_LED_0_1"),
- PINCTRL_PIN(147, "GBE_LED_1_0"),
- PINCTRL_PIN(148, "GBE_LED_1_1"),
- PINCTRL_PIN(149, "GBE_LED_2_0"),
- PINCTRL_PIN(150, "GBE_LED_2_1"),
- PINCTRL_PIN(151, "GBE_LED_3_0"),
- PINCTRL_PIN(152, "GBE_LED_3_1"),
- PINCTRL_PIN(153, "GBE_SCL_0"),
- PINCTRL_PIN(154, "GBE_SDA_0"),
- PINCTRL_PIN(155, "GBE_SCL_1"),
- PINCTRL_PIN(156, "GBE_SDA_1"),
- PINCTRL_PIN(157, "GBE_SCL_2"),
- PINCTRL_PIN(158, "GBE_SDA_2"),
- PINCTRL_PIN(159, "GBE_SCL_3"),
- PINCTRL_PIN(160, "GBE_SDA_3"),
- PINCTRL_PIN(161, "GBE_SDP_0_0"),
- PINCTRL_PIN(162, "GBE_SDP_0_1"),
- PINCTRL_PIN(163, "GBE_SDP_1_0"),
- PINCTRL_PIN(164, "GBE_SDP_1_1"),
- PINCTRL_PIN(165, "GBE_SDP_2_0"),
- PINCTRL_PIN(166, "GBE_SDP_2_1"),
- PINCTRL_PIN(167, "GBE_SDP_3_0"),
- PINCTRL_PIN(168, "GBE_SDP_3_1"),
+ PINCTRL_PIN(144, "GBE_LED_0_0"),
+ PINCTRL_PIN(145, "GBE_LED_0_1"),
+ PINCTRL_PIN(146, "GBE_LED_1_0"),
+ PINCTRL_PIN(147, "GBE_LED_1_1"),
+ PINCTRL_PIN(148, "GBE_LED_2_0"),
+ PINCTRL_PIN(149, "GBE_LED_2_1"),
+ PINCTRL_PIN(150, "GBE_LED_3_0"),
+ PINCTRL_PIN(151, "GBE_LED_3_1"),
+ PINCTRL_PIN(152, "GBE_SCL_0"),
+ PINCTRL_PIN(153, "GBE_SDA_0"),
+ PINCTRL_PIN(154, "GBE_SCL_1"),
+ PINCTRL_PIN(155, "GBE_SDA_1"),
+ PINCTRL_PIN(156, "GBE_SCL_2"),
+ PINCTRL_PIN(157, "GBE_SDA_2"),
+ PINCTRL_PIN(158, "GBE_SCL_3"),
+ PINCTRL_PIN(159, "GBE_SDA_3"),
+ PINCTRL_PIN(160, "GBE_SDP_0_0"),
+ PINCTRL_PIN(161, "GBE_SDP_0_1"),
+ PINCTRL_PIN(162, "GBE_SDP_1_0"),
+ PINCTRL_PIN(163, "GBE_SDP_1_1"),
+ PINCTRL_PIN(164, "GBE_SDP_2_0"),
+ PINCTRL_PIN(165, "GBE_SDP_2_1"),
+ PINCTRL_PIN(166, "GBE_SDP_3_0"),
+ PINCTRL_PIN(167, "GBE_SDP_3_1"),
/* GPP_K */
- PINCTRL_PIN(169, "GBE_RMIICLK"),
- PINCTRL_PIN(170, "GBE_RMII_TXD_0"),
- PINCTRL_PIN(171, "GBE_RMII_TXD_1"),
+ PINCTRL_PIN(168, "GBE_RMIICLK"),
+ PINCTRL_PIN(169, "GBE_RMII_RXD_0"),
+ PINCTRL_PIN(170, "GBE_RMII_RXD_1"),
+ PINCTRL_PIN(171, "GBE_RMII_CRS_DV"),
PINCTRL_PIN(172, "GBE_RMII_TX_EN"),
- PINCTRL_PIN(173, "GBE_RMII_CRS_DV"),
- PINCTRL_PIN(174, "GBE_RMII_RXD_0"),
- PINCTRL_PIN(175, "GBE_RMII_RXD_1"),
- PINCTRL_PIN(176, "GBE_RMII_RX_ER"),
- PINCTRL_PIN(177, "GBE_RMII_ARBIN"),
- PINCTRL_PIN(178, "GBE_RMII_ARB_OUT"),
- PINCTRL_PIN(179, "PE_RST_N"),
- PINCTRL_PIN(180, "GPIO_RCOMP_1P8_3P3"),
+ PINCTRL_PIN(173, "GBE_RMII_TXD_0"),
+ PINCTRL_PIN(174, "GBE_RMII_TXD_1"),
+ PINCTRL_PIN(175, "GBE_RMII_RX_ER"),
+ PINCTRL_PIN(176, "GBE_RMII_ARBIN"),
+ PINCTRL_PIN(177, "GBE_RMII_ARB_OUT"),
+ PINCTRL_PIN(178, "PE_RST_N"),
/* GPP_G */
- PINCTRL_PIN(181, "FAN_TACH_0"),
- PINCTRL_PIN(182, "FAN_TACH_1"),
- PINCTRL_PIN(183, "FAN_TACH_2"),
- PINCTRL_PIN(184, "FAN_TACH_3"),
- PINCTRL_PIN(185, "FAN_TACH_4"),
- PINCTRL_PIN(186, "FAN_TACH_5"),
- PINCTRL_PIN(187, "FAN_TACH_6"),
- PINCTRL_PIN(188, "FAN_TACH_7"),
- PINCTRL_PIN(189, "FAN_PWM_0"),
- PINCTRL_PIN(190, "FAN_PWM_1"),
- PINCTRL_PIN(191, "FAN_PWM_2"),
- PINCTRL_PIN(192, "FAN_PWM_3"),
- PINCTRL_PIN(193, "GSXDOUT"),
- PINCTRL_PIN(194, "GSXSLOAD"),
- PINCTRL_PIN(195, "GSXDIN"),
- PINCTRL_PIN(196, "GSXSRESETB"),
- PINCTRL_PIN(197, "GSXCLK"),
- PINCTRL_PIN(198, "ADR_COMPLETE"),
- PINCTRL_PIN(199, "NMIB"),
- PINCTRL_PIN(200, "SMIB"),
- PINCTRL_PIN(201, "SSATA_DEVSLP_0"),
- PINCTRL_PIN(202, "SSATA_DEVSLP_1"),
- PINCTRL_PIN(203, "SSATA_DEVSLP_2"),
- PINCTRL_PIN(204, "SSATAXPCIE0_SSATAGP0"),
+ PINCTRL_PIN(179, "FAN_TACH_0"),
+ PINCTRL_PIN(180, "FAN_TACH_1"),
+ PINCTRL_PIN(181, "FAN_TACH_2"),
+ PINCTRL_PIN(182, "FAN_TACH_3"),
+ PINCTRL_PIN(183, "FAN_TACH_4"),
+ PINCTRL_PIN(184, "FAN_TACH_5"),
+ PINCTRL_PIN(185, "FAN_TACH_6"),
+ PINCTRL_PIN(186, "FAN_TACH_7"),
+ PINCTRL_PIN(187, "FAN_PWM_0"),
+ PINCTRL_PIN(188, "FAN_PWM_1"),
+ PINCTRL_PIN(189, "FAN_PWM_2"),
+ PINCTRL_PIN(190, "FAN_PWM_3"),
+ PINCTRL_PIN(191, "GSXDOUT"),
+ PINCTRL_PIN(192, "GSXSLOAD"),
+ PINCTRL_PIN(193, "GSXDIN"),
+ PINCTRL_PIN(194, "GSXSRESETB"),
+ PINCTRL_PIN(195, "GSXCLK"),
+ PINCTRL_PIN(196, "ADR_COMPLETE"),
+ PINCTRL_PIN(197, "NMIB"),
+ PINCTRL_PIN(198, "SMIB"),
+ PINCTRL_PIN(199, "SSATA_DEVSLP_0"),
+ PINCTRL_PIN(200, "SSATA_DEVSLP_1"),
+ PINCTRL_PIN(201, "SSATA_DEVSLP_2"),
+ PINCTRL_PIN(202, "SSATAXPCIE0_SSATAGP0"),
/* GPP_H */
- PINCTRL_PIN(205, "SRCCLKREQB_6"),
- PINCTRL_PIN(206, "SRCCLKREQB_7"),
- PINCTRL_PIN(207, "SRCCLKREQB_8"),
- PINCTRL_PIN(208, "SRCCLKREQB_9"),
- PINCTRL_PIN(209, "SRCCLKREQB_10"),
- PINCTRL_PIN(210, "SRCCLKREQB_11"),
- PINCTRL_PIN(211, "SRCCLKREQB_12"),
- PINCTRL_PIN(212, "SRCCLKREQB_13"),
- PINCTRL_PIN(213, "SRCCLKREQB_14"),
- PINCTRL_PIN(214, "SRCCLKREQB_15"),
- PINCTRL_PIN(215, "SML2CLK"),
- PINCTRL_PIN(216, "SML2DATA"),
- PINCTRL_PIN(217, "SML2ALERTB"),
- PINCTRL_PIN(218, "SML3CLK"),
- PINCTRL_PIN(219, "SML3DATA"),
- PINCTRL_PIN(220, "SML3ALERTB"),
- PINCTRL_PIN(221, "SML4CLK"),
- PINCTRL_PIN(222, "SML4DATA"),
- PINCTRL_PIN(223, "SML4ALERTB"),
- PINCTRL_PIN(224, "SSATAXPCIE1_SSATAGP1"),
- PINCTRL_PIN(225, "SSATAXPCIE2_SSATAGP2"),
- PINCTRL_PIN(226, "SSATAXPCIE3_SSATAGP3"),
- PINCTRL_PIN(227, "SSATAXPCIE4_SSATAGP4"),
- PINCTRL_PIN(228, "SSATAXPCIE5_SSATAGP5"),
+ PINCTRL_PIN(203, "SRCCLKREQB_6"),
+ PINCTRL_PIN(204, "SRCCLKREQB_7"),
+ PINCTRL_PIN(205, "SRCCLKREQB_8"),
+ PINCTRL_PIN(206, "SRCCLKREQB_9"),
+ PINCTRL_PIN(207, "SRCCLKREQB_10"),
+ PINCTRL_PIN(208, "SRCCLKREQB_11"),
+ PINCTRL_PIN(209, "SRCCLKREQB_12"),
+ PINCTRL_PIN(210, "SRCCLKREQB_13"),
+ PINCTRL_PIN(211, "SRCCLKREQB_14"),
+ PINCTRL_PIN(212, "SRCCLKREQB_15"),
+ PINCTRL_PIN(213, "SML2CLK"),
+ PINCTRL_PIN(214, "SML2DATA"),
+ PINCTRL_PIN(215, "SML2ALERTB"),
+ PINCTRL_PIN(216, "SML3CLK"),
+ PINCTRL_PIN(217, "SML3DATA"),
+ PINCTRL_PIN(218, "SML3ALERTB"),
+ PINCTRL_PIN(219, "SML4CLK"),
+ PINCTRL_PIN(220, "SML4DATA"),
+ PINCTRL_PIN(221, "SML4ALERTB"),
+ PINCTRL_PIN(222, "SSATAXPCIE1_SSATAGP1"),
+ PINCTRL_PIN(223, "SSATAXPCIE2_SSATAGP2"),
+ PINCTRL_PIN(224, "SSATAXPCIE3_SSATAGP3"),
+ PINCTRL_PIN(225, "SSATAXPCIE4_SSATAGP4"),
+ PINCTRL_PIN(226, "SSATAXPCIE5_SSATAGP5"),
/* GPP_L */
+ PINCTRL_PIN(227, "GPP_L_0"),
+ PINCTRL_PIN(228, "EC_CSME_INTR_OUT"),
PINCTRL_PIN(229, "VISA2CH0_D0"),
PINCTRL_PIN(230, "VISA2CH0_D1"),
PINCTRL_PIN(231, "VISA2CH0_D2"),
From: Bart Van Assche <[email protected]>
commit e88982ad1bb12db699de96fbc07096359ef6176c upstream.
The code added by this patch is similar to the code that already exists in
ibmvscsis_determine_resid(). This patch has been tested by running the
following command:
strace sg_raw -r 1k /dev/sdb 12 00 00 00 60 00 -o inquiry.bin |&
grep resid=
Link: https://lore.kernel.org/r/[email protected]
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <[email protected]>
Acked-by: Honggang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1246,9 +1246,11 @@ static int srpt_build_cmd_rsp(struct srp
struct srpt_send_ioctx *ioctx, u64 tag,
int status)
{
+ struct se_cmd *cmd = &ioctx->cmd;
struct srp_rsp *srp_rsp;
const u8 *sense_data;
int sense_data_len, max_sense_len;
+ u32 resid = cmd->residual_count;
/*
* The lowest bit of all SAM-3 status codes is zero (see also
@@ -1270,6 +1272,28 @@ static int srpt_build_cmd_rsp(struct srp
srp_rsp->tag = tag;
srp_rsp->status = status;
+ if (cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) {
+ if (cmd->data_direction == DMA_TO_DEVICE) {
+ /* residual data from an underflow write */
+ srp_rsp->flags = SRP_RSP_FLAG_DOUNDER;
+ srp_rsp->data_out_res_cnt = cpu_to_be32(resid);
+ } else if (cmd->data_direction == DMA_FROM_DEVICE) {
+ /* residual data from an underflow read */
+ srp_rsp->flags = SRP_RSP_FLAG_DIUNDER;
+ srp_rsp->data_in_res_cnt = cpu_to_be32(resid);
+ }
+ } else if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) {
+ if (cmd->data_direction == DMA_TO_DEVICE) {
+ /* residual data from an overflow write */
+ srp_rsp->flags = SRP_RSP_FLAG_DOOVER;
+ srp_rsp->data_out_res_cnt = cpu_to_be32(resid);
+ } else if (cmd->data_direction == DMA_FROM_DEVICE) {
+ /* residual data from an overflow read */
+ srp_rsp->flags = SRP_RSP_FLAG_DIOVER;
+ srp_rsp->data_in_res_cnt = cpu_to_be32(resid);
+ }
+ }
+
if (sense_data_len) {
BUILD_BUG_ON(MIN_MAX_RSP_SIZE <= sizeof(*srp_rsp));
max_sense_len = ch->max_ti_iu_len - sizeof(*srp_rsp);
From: John Stultz <[email protected]>
[ Upstream commit 2f42e05b942fe2fbfb9bbc6e34e1dd8c3ce4f3a4 ]
In some cases we seem to submit two transactions in a row, which
causes us to lose track of the first. If we then cancel the
request, we may still get an interrupt, which traverses a null
ds_run value.
So try to avoid starting a new transaction if the ds_run value
is set.
While this patch avoids the null pointer crash, I've had some
reports of the k3dma driver still getting confused, which
suggests the ds_run/ds_done value handling still isn't quite
right. However, I've not run into an issue recently with it
so I think this patch is worth pushing upstream to avoid the
crash.
Signed-off-by: John Stultz <[email protected]>
[add ss tag]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/k3dma.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index 219ae3b545db..803045c92f3b 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -222,9 +222,11 @@ static irqreturn_t k3_dma_int_handler(int irq, void *dev_id)
c = p->vchan;
if (c && (tc1 & BIT(i))) {
spin_lock_irqsave(&c->vc.lock, flags);
- vchan_cookie_complete(&p->ds_run->vd);
- p->ds_done = p->ds_run;
- p->ds_run = NULL;
+ if (p->ds_run != NULL) {
+ vchan_cookie_complete(&p->ds_run->vd);
+ p->ds_done = p->ds_run;
+ p->ds_run = NULL;
+ }
spin_unlock_irqrestore(&c->vc.lock, flags);
}
if (c && (tc2 & BIT(i))) {
@@ -264,6 +266,10 @@ static int k3_dma_start_txd(struct k3_dma_chan *c)
if (BIT(c->phy->idx) & k3_dma_get_chan_stat(d))
return -EAGAIN;
+ /* Avoid losing track of ds_run if a transaction is in flight */
+ if (c->phy->ds_run)
+ return -EAGAIN;
+
if (vd) {
struct k3_dma_desc_sw *ds =
container_of(vd, struct k3_dma_desc_sw, vd);
--
2.20.1
From: Nathan Chancellor <[email protected]>
commit 091c6e9c083f7ebaff00b37ad13562d51464d175 upstream.
When building with Clang + -Wtautological-pointer-compare:
drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison
of address of 'rtlpriv->regd' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (wiphy == NULL || &rtlpriv->regd == NULL)
~~~~~~~~~^~~~ ~~~~
1 warning generated.
The address of an array member is never NULL unless it is the first
struct member so remove the unnecessary check. This was addressed in
the staging version of the driver in commit f986978b32b3 ("Staging:
rtlwifi: remove unnecessary NULL check").
While we are here, fix the following checkpatch warning:
CHECK: Comparison to NULL could be written "!wiphy"
35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389:
+ if (wiphy == NULL)
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Link:https://github.com/ClangBuiltLinux/linux/issues/750
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/regd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/realtek/rtlwifi/regd.c
+++ b/drivers/net/wireless/realtek/rtlwifi/regd.c
@@ -427,7 +427,7 @@ int rtl_regd_init(struct ieee80211_hw *h
struct wiphy *wiphy = hw->wiphy;
struct country_code_to_enum_rd *country = NULL;
- if (wiphy == NULL || &rtlpriv->regd == NULL)
+ if (!wiphy)
return -EINVAL;
/* init country_code from efuse channel plan */
From: Arnd Bergmann <[email protected]>
commit 9d7bf41fafa5b5ddd4c13eb39446b0045f0a8167 upstream.
Unlike the normal SIOCOUTQ, SIOCOUTQNSD was never handled in compat
mode. Add it to the common socket compat handler along with similar
ones.
Fixes: 2f4e1b397097 ("tcp: ioctl type SIOCOUTQNSD returns amount of data not sent")
Cc: Eric Dumazet <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/socket.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/socket.c
+++ b/net/socket.c
@@ -3267,6 +3267,7 @@ static int compat_sock_ioctl_trans(struc
case SIOCSARP:
case SIOCGARP:
case SIOCDARP:
+ case SIOCOUTQNSD:
case SIOCATMARK:
return sock_do_ioctl(net, sock, cmd, arg);
}
From: Jon Derrick <[email protected]>
commit 7d4e6ccd1fb09dbfbc49746ca82bd5c25ad4bfe4 upstream.
This adds the missing teardown step that removes the device link from
the group when the device addition fails.
Signed-off-by: Jon Derrick <[email protected]>
Fixes: 797a8b4d768c5 ("iommu: Handle default domain attach failure")
Reviewed-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/iommu.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -613,6 +613,7 @@ err_put_group:
mutex_unlock(&group->mutex);
dev->iommu_group = NULL;
kobject_put(group->devices_kobj);
+ sysfs_remove_link(group->devices_kobj, device->name);
err_free_name:
kfree(device->name);
err_remove_link:
From: Sanjay Konduri <[email protected]>
commit abd39c6ded9db53aa44c2540092bdd5fb6590fa8 upstream.
Observed crash in some scenarios when assertion has occurred,
this is because hw structure is freed and is tried to get
accessed in some functions where null check is already
present. So, avoided the crash by making the hw to NULL after
freeing.
Signed-off-by: Sanjay Konduri <[email protected]>
Signed-off-by: Sushant Kumar Mishra <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -218,6 +218,7 @@ void rsi_mac80211_detach(struct rsi_hw *
ieee80211_stop_queues(hw);
ieee80211_unregister_hw(hw);
ieee80211_free_hw(hw);
+ adapter->hw = NULL;
}
for (band = 0; band < NUM_NL80211_BANDS; band++) {
From: Olivier Moysan <[email protected]>
commit 86e1956af4c863d653136fd6e5694adf2054dbaa upstream.
When snd_pcm_stop() is called in interrupt routine,
substream context may have already been released.
Add protection on substream context.
Fixes: 03e4d5d56fa5 ("ASoC: stm32: Add SPDIFRX support")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/stm/stm32_spdifrx.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -213,6 +213,7 @@
* @slave_config: dma slave channel runtime config pointer
* @phys_addr: SPDIFRX registers physical base address
* @lock: synchronization enabling lock
+ * @irq_lock: prevent race condition with IRQ on stream state
* @cs: channel status buffer
* @ub: user data buffer
* @irq: SPDIFRX interrupt line
@@ -233,6 +234,7 @@ struct stm32_spdifrx_data {
struct dma_slave_config slave_config;
dma_addr_t phys_addr;
spinlock_t lock; /* Sync enabling lock */
+ spinlock_t irq_lock; /* Prevent race condition on stream state */
unsigned char cs[SPDIFRX_CS_BYTES_NB];
unsigned char ub[SPDIFRX_UB_BYTES_NB];
int irq;
@@ -646,7 +648,6 @@ static const struct regmap_config stm32_
static irqreturn_t stm32_spdifrx_isr(int irq, void *devid)
{
struct stm32_spdifrx_data *spdifrx = (struct stm32_spdifrx_data *)devid;
- struct snd_pcm_substream *substream = spdifrx->substream;
struct platform_device *pdev = spdifrx->pdev;
unsigned int cr, mask, sr, imr;
unsigned int flags;
@@ -714,14 +715,19 @@ static irqreturn_t stm32_spdifrx_isr(int
regmap_update_bits(spdifrx->regmap, STM32_SPDIFRX_CR,
SPDIFRX_CR_SPDIFEN_MASK, cr);
- if (substream)
- snd_pcm_stop(substream, SNDRV_PCM_STATE_DISCONNECTED);
+ spin_lock(&spdifrx->irq_lock);
+ if (spdifrx->substream)
+ snd_pcm_stop(spdifrx->substream,
+ SNDRV_PCM_STATE_DISCONNECTED);
+ spin_unlock(&spdifrx->irq_lock);
return IRQ_HANDLED;
}
- if (err_xrun && substream)
- snd_pcm_stop_xrun(substream);
+ spin_lock(&spdifrx->irq_lock);
+ if (err_xrun && spdifrx->substream)
+ snd_pcm_stop_xrun(spdifrx->substream);
+ spin_unlock(&spdifrx->irq_lock);
return IRQ_HANDLED;
}
@@ -730,9 +736,12 @@ static int stm32_spdifrx_startup(struct
struct snd_soc_dai *cpu_dai)
{
struct stm32_spdifrx_data *spdifrx = snd_soc_dai_get_drvdata(cpu_dai);
+ unsigned long flags;
int ret;
+ spin_lock_irqsave(&spdifrx->irq_lock, flags);
spdifrx->substream = substream;
+ spin_unlock_irqrestore(&spdifrx->irq_lock, flags);
ret = clk_prepare_enable(spdifrx->kclk);
if (ret)
@@ -804,8 +813,12 @@ static void stm32_spdifrx_shutdown(struc
struct snd_soc_dai *cpu_dai)
{
struct stm32_spdifrx_data *spdifrx = snd_soc_dai_get_drvdata(cpu_dai);
+ unsigned long flags;
+ spin_lock_irqsave(&spdifrx->irq_lock, flags);
spdifrx->substream = NULL;
+ spin_unlock_irqrestore(&spdifrx->irq_lock, flags);
+
clk_disable_unprepare(spdifrx->kclk);
}
@@ -910,6 +923,7 @@ static int stm32_spdifrx_probe(struct pl
spdifrx->pdev = pdev;
init_completion(&spdifrx->cs_completion);
spin_lock_init(&spdifrx->lock);
+ spin_lock_init(&spdifrx->irq_lock);
platform_set_drvdata(pdev, spdifrx);
From: Arnd Bergmann <[email protected]>
commit 3499e87ea0413ee5b2cc028f4c8ed4d424bc7f98 upstream.
clang inlines the dev_ethtool() more aggressively than gcc does, leading
to a larger amount of used stack space:
net/core/ethtool.c:2536:24: error: stack frame size of 1216 bytes in function 'dev_ethtool' [-Werror,-Wframe-larger-than=]
Marking the sub-functions that require the most stack space as
noinline_for_stack gives us reasonable behavior on all compilers.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Miles Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/ethtool.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -2343,9 +2343,10 @@ static int ethtool_set_tunable(struct ne
return ret;
}
-static int ethtool_get_per_queue_coalesce(struct net_device *dev,
- void __user *useraddr,
- struct ethtool_per_queue_op *per_queue_opt)
+static noinline_for_stack int
+ethtool_get_per_queue_coalesce(struct net_device *dev,
+ void __user *useraddr,
+ struct ethtool_per_queue_op *per_queue_opt)
{
u32 bit;
int ret;
@@ -2375,9 +2376,10 @@ static int ethtool_get_per_queue_coalesc
return 0;
}
-static int ethtool_set_per_queue_coalesce(struct net_device *dev,
- void __user *useraddr,
- struct ethtool_per_queue_op *per_queue_opt)
+static noinline_for_stack int
+ethtool_set_per_queue_coalesce(struct net_device *dev,
+ void __user *useraddr,
+ struct ethtool_per_queue_op *per_queue_opt)
{
u32 bit;
int i, ret = 0;
@@ -2434,7 +2436,7 @@ roll_back:
return ret;
}
-static int ethtool_set_per_queue(struct net_device *dev,
+static int noinline_for_stack ethtool_set_per_queue(struct net_device *dev,
void __user *useraddr, u32 sub_cmd)
{
struct ethtool_per_queue_op per_queue_opt;
From: Loic Poulain <[email protected]>
commit e38161bd325ea541ef2f258d8e28281077dde524 upstream.
In the same way as for msm8974-hammerhead, l21 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).
Reviewed-by: Bjorn Andersson <[email protected]>
Fixes: 660a9763c6a9 (arm64: dts: qcom: db820c: Add pm8994 regulator node)
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -262,6 +262,8 @@
l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
};
l22 {
regulator-min-microvolt = <3300000>;
From: Kai Li <[email protected]>
[ Upstream commit 397eac17f86f404f5ba31d8c3e39ec3124b39fd3 ]
If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.
When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset). If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.
The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.
This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.
ocfs2_recover_node->ocfs2_replay_journal.
The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.
logdump:
Block 0: Journal Superblock
Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096 Total Blocks: 32768 First Block: 1
First Commit ID: 13 Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1 Dynamic Superblk Blknum: 0
Per Txn Block Limit Journal: 0 Data: 0
Block 1: Journal Commit Block
Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK)
Block 2: Journal Descriptor
Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum Flags
0. 587 none
UUID: 00000000000000000000000000000000
1. 8257792 JBD2_FLAG_SAME_UUID
2. 619 JBD2_FLAG_SAME_UUID
3. 24772864 JBD2_FLAG_SAME_UUID
4. 8257802 JBD2_FLAG_SAME_UUID
5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
...
Block 7: Inode
Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809)
FS Generation: 2839773110 (0xa9437fb6)
CRC32: 00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x1) InlineData
User: 0 (root) Group: 0 (root) Size: 7
Links: 1 Clusters: 0
ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019
mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
dtime: 0x0 -- Thu Jan 1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK)
The following is journal recovery log when recovering the upper jbd2
journal when mount again.
syslog:
ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13
Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Kai Li <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Changwei Ge <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/journal.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 2459ae9d2234..39bb80fb2934 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1080,6 +1080,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)
ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num);
+ if (replayed) {
+ jbd2_journal_lock_updates(journal->j_journal);
+ status = jbd2_journal_flush(journal->j_journal);
+ jbd2_journal_unlock_updates(journal->j_journal);
+ if (status < 0)
+ mlog_errno(status);
+ }
+
status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
if (status < 0) {
mlog_errno(status);
--
2.20.1
On 16/01/2020 23:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.166 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.166-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.14.166-rc1-ge0cdfda22253
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Fri, 17 Jan 2020 at 05:02, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.166 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.166-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.14.166-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: e0cdfda2225350bfbf0a3d0a6ba1c2717512f26b
git describe: v4.14.165-72-ge0cdfda22253
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.165-72-ge0cdfda22253
No regressions (compared to build v4.14.165)
No fixes (compared to build v4.14.165)
Ran 24180 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* ltp-cve-tests
* network-basic-tests
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On Fri, Jan 17, 2020 at 12:17:58AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.166 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 375 pass: 375 fail: 0
Guenter
On 1/16/20 4:17 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.166 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.166-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah