2019-11-22 08:25:28

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 00/48] atmel_mxt_ts misc

This patch-set forward ports Nick Dyer's work in ndyer/linux github repository
as long as some other features and fixes

Balasubramani Vivekanandan (2):
Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c
transaction
Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin

Dean Jenkins (1):
Input: atmel_mxt_ts: return error from
mxt_process_messages_until_invalid()

Deepak Das (6):
Input: Atmel: improve error handling in mxt_start()
Input: Atmel: improve error handling in mxt_initialize()
Input: Atmel: improve error handling in mxt_update_cfg()
Input: Atmel: Improve error handling in mxt_initialize_input_device()
Input: Atmel: handle ReportID "0x00" while processing T5 messages
Input: Atmel: use T44 object to process T5 messages

George G. Davis (1):
input: atmel_mxt_ts: export GPIO reset line via sysfs

Jiada Wang (3):
Input: introduce input_mt_report_slot_inactive
Input: atmel_mxt_ts - eliminate data->raw_info_block
Input: atmel_mxt_ts - Fix compilation warning

Karl Tsou (1):
Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs

Kautuk Consul (2):
Input: atmel_mxt_ts - Change call-points of mxt_free_* functions
Input: atmel_mxt_ts - rely on calculated_crc rather than file
config_crc

Naveen Chakka (2):
input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen
status
input: atmel_mxt_ts: added sysfs interface to update atmel T38 data

Nick Dyer (26):
Input: atmel_mxt_ts - rework sysfs init/remove
Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when
necessary
Input: atmel_mxt_ts - split large i2c transfers into blocks
Input: atmel_mxt_ts - output status from T48 Noise Supression
Input: atmel_mxt_ts - output status from T42 Touch Suppression
Input: atmel_mxt_ts - implement T9 vector/orientation support
Input: atmel_mxt_ts - implement T15 Key Array support
Input: atmel_mxt_ts - handle reports from T47 Stylus object
Input: atmel_mxt_ts - implement support for T107 active stylus
Input: atmel_mxt_ts - release touch state during suspend
Input: atmel_mxt_ts - add regulator control support
Input: atmel_mxt_ts - report failures in suspend/resume
Input: atmel_mxt_ts - allow specification of firmware file name
Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
Input: atmel_mxt_ts - allow input name to be specified in platform
data
Input: atmel_mxt_ts - refactor firmware flash to extract context into
struct
Input: atmel_mxt_ts - refactor code to enter bootloader into separate
func
Input: atmel_mxt_ts - combine bootloader version query with probe
Input: atmel_mxt_ts - improve bootloader state machine handling
Input: atmel_mxt_ts - rename bl_completion to chg_completion
Input: atmel_mxt_ts - make bootloader interrupt driven
Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
Input: atmel_mxt_ts - implement I2C retries
Input: atmel_mxt_ts - orientation is not present in hover
Input: atmel_mxt_ts - implement debug output for messages
Input: atmel_mxt_ts - implement improved debug message interface

Nikhil Ravindran (1):
Input: atmel_mxt_ts: Add support for run self-test routine.

Sanjeev Chugh (1):
Input: atmel_mxt_ts: Implement synchronization during various
operation

karl tsou (1):
Input: atmel_mxt_ts - add config checksum attribute to sysfs

keerthikumarp (1):
input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel
touch panel controller in detachable displays.

---
v6:
Fix issue in commit ("Input: introduce input_mt_report_slot_inactive")
reported by kernel test robot

v5:
Following commits have been updated to address warnings & errors
reported by kbuild test robot
Input: atmel_mxt_ts - make bootloader interrupt driven
Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs

Following commit has been updated
Input: introduce input_mt_report_slot_inactive

v4:
Following commit in v3 patch-set has been removed
Input: switch to use return value of input_mt_report_slot_state

Following commit has been updated to address checkpatch warning
Input: atmel_mxt_ts: Implement synchronization during various operation

v3:
Following commits have been updated compared to v2 patchset
Input: atmel_mxt_ts - implement debug output for messages
- added inline comment
Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msg
- changed dev_info() to dev_dbg()

v2:
Following commit in v1 patchset has been split into two commits
Input: introduce input_mt_report_slot_inactive

Following commits have been updated compared to v1 patchset
Input: atmel_mxt_ts - split large i2c transfers into blocks
Input: atmel_mxt_ts - output status from T42 Touch Suppression

Following commits in v1 patchset have been squashed
Input: touchscreen: Atmel: Add device tree support for T15 key array objects
Input: atmel_mxt_ts - check data->input_dev is not null in mxt_input_sync()
Input: atmel_mxt_ts - check firmware format before entering bootloader
Input: atmel_mxt_ts: update stale use_retrigen_workaround flag
input: atmel_mxt_ts: move bootloader probe from mxt_initialize()
input: Atmel: limit the max bytes transferred while reading T5 messages
Input: atmel_mxt_ts: Use msecs_to_jiffies() instead of HZ
Input: atmel_mxt_ts: Use complete when in_bootloader true
Input: atmel_mxt_ts: Prevent crash due to freeing of input device
input: atmel_mxt_ts: Add NULL check for sysfs attribute debug_msg_attr

Following commits in v1 patchset have been dropped:
Input: atmel_mxt_ts - configure and use gpios as real gpios
Input: touchscreen: Atmel: Enable IRQ_DISABLE_UNLAZY flag for interrupt
Input: atmel_mxt_ts - add memory access interface via sysfs
Input: atmel_mxt_ts: Remove sysfs attributes during driver detach
Input: atmel_mxt_ts: Avoid race condition in freeing of input device


v1: initial version
---
.../bindings/input/atmel,maxtouch.txt | 14 +
MAINTAINERS | 1 +
drivers/hid/hid-alps.c | 3 +-
drivers/hid/hid-multitouch.c | 6 +-
drivers/input/input-mt.c | 2 +-
drivers/input/misc/xen-kbdfront.c | 2 +-
drivers/input/mouse/elan_i2c_core.c | 2 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 2266 ++++++++++++++---
drivers/input/touchscreen/cyttsp4_core.c | 5 +-
drivers/input/touchscreen/cyttsp_core.c | 2 +-
drivers/input/touchscreen/melfas_mip4.c | 4 +-
drivers/input/touchscreen/mms114.c | 2 +-
drivers/input/touchscreen/raspberrypi-ts.c | 2 +-
drivers/input/touchscreen/stmfts.c | 2 +-
include/dt-bindings/input/atmel_mxt_ts.h | 22 +
include/linux/input/mt.h | 5 +
16 files changed, 1984 insertions(+), 356 deletions(-)
create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h

--
2.17.1


2019-11-22 08:25:43

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 01/48] Input: introduce input_mt_report_slot_inactive

input_mt_report_slot_state() ignores the tool when the slot is closed.
which has caused a bit of confusion.
This patch introduces input_mt_report_slot_inactive() to report slot
inactive state.
replaces all input_mt_report_slot_state() with
input_mt_report_slot_inactive() in case of close of slot.

Suggested-by: Dmitry Torokhov <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/hid/hid-alps.c | 3 +--
drivers/hid/hid-multitouch.c | 6 ++----
drivers/input/misc/xen-kbdfront.c | 2 +-
drivers/input/mouse/elan_i2c_core.c | 2 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 7 +++----
drivers/input/touchscreen/cyttsp4_core.c | 5 ++---
drivers/input/touchscreen/cyttsp_core.c | 2 +-
drivers/input/touchscreen/melfas_mip4.c | 4 ++--
drivers/input/touchscreen/mms114.c | 2 +-
drivers/input/touchscreen/raspberrypi-ts.c | 2 +-
drivers/input/touchscreen/stmfts.c | 2 +-
include/linux/input/mt.h | 5 +++++
12 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c
index ae79a7c66737..36ca1d815d53 100644
--- a/drivers/hid/hid-alps.c
+++ b/drivers/hid/hid-alps.c
@@ -387,8 +387,7 @@ static int u1_raw_event(struct alps_dev *hdata, u8 *data, int size)
input_report_abs(hdata->input,
ABS_MT_PRESSURE, z);
} else {
- input_mt_report_slot_state(hdata->input,
- MT_TOOL_FINGER, 0);
+ input_mt_report_slot_inactive(hdata->input);
}
}

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 3cfeb1629f79..15e6c04a76dd 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -896,7 +896,7 @@ static void mt_release_pending_palms(struct mt_device *td,
clear_bit(slotnum, app->pending_palm_slots);

input_mt_slot(input, slotnum);
- input_mt_report_slot_state(input, MT_TOOL_PALM, false);
+ input_mt_report_slot_inactive(input);

need_sync = true;
}
@@ -1640,9 +1640,7 @@ static void mt_release_contacts(struct hid_device *hid)
if (mt) {
for (i = 0; i < mt->num_slots; i++) {
input_mt_slot(input_dev, i);
- input_mt_report_slot_state(input_dev,
- MT_TOOL_FINGER,
- false);
+ input_mt_report_slot_inactive(input_dev);
}
input_mt_sync_frame(input_dev);
input_sync(input_dev);
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 24bc5c5d876f..a1bba722b234 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -146,7 +146,7 @@ static void xenkbd_handle_mt_event(struct xenkbd_info *info,
break;

case XENKBD_MT_EV_UP:
- input_mt_report_slot_state(info->mtouch, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(info->mtouch);
break;

case XENKBD_MT_EV_SYN:
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 8719da540383..3f9354baac4b 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -938,7 +938,7 @@ static void elan_report_contact(struct elan_tp_data *data,
input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
} else {
input_mt_slot(input, contact_num);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(input);
}
}

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 24c4b691b1c9..6e758af343ea 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -822,8 +822,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
* have happened.
*/
if (status & MXT_T9_RELEASE) {
- input_mt_report_slot_state(input_dev,
- MT_TOOL_FINGER, 0);
+ input_mt_report_slot_inactive(input_dev);
mxt_input_sync(data);
}

@@ -839,7 +838,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
} else {
/* Touch no longer active, close out slot */
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+ input_mt_report_slot_inactive(input_dev);
}

data->update_input = true;
@@ -947,7 +946,7 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
dev_dbg(dev, "[%u] release\n", id);

/* close out slot */
- input_mt_report_slot_state(input_dev, 0, 0);
+ input_mt_report_slot_inactive(input_dev);
}

data->update_input = true;
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
index 4b22d49a0f49..a3a85e2348a2 100644
--- a/drivers/input/touchscreen/cyttsp4_core.c
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -744,8 +744,7 @@ static void cyttsp4_report_slot_liftoff(struct cyttsp4_mt_data *md,

for (t = 0; t < max_slots; t++) {
input_mt_slot(md->input, t);
- input_mt_report_slot_state(md->input,
- MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(md->input);
}
}

@@ -845,7 +844,7 @@ static void cyttsp4_final_sync(struct input_dev *input, int max_slots, int *ids)
if (ids[t])
continue;
input_mt_slot(input, t);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(input);
}

input_sync(input);
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
index 3f5d463dbeed..697aa2c158f7 100644
--- a/drivers/input/touchscreen/cyttsp_core.c
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -340,7 +340,7 @@ static void cyttsp_report_tchdata(struct cyttsp *ts)
continue;

input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(input);
}

input_sync(input);
diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c
index 247c3aaba2d8..f67efdd040b2 100644
--- a/drivers/input/touchscreen/melfas_mip4.c
+++ b/drivers/input/touchscreen/melfas_mip4.c
@@ -391,7 +391,7 @@ static void mip4_clear_input(struct mip4_ts *ts)
/* Screen */
for (i = 0; i < MIP4_MAX_FINGERS; i++) {
input_mt_slot(ts->input, i);
- input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, 0);
+ input_mt_report_slot_inactive(ts->input);
}

/* Keys */
@@ -534,7 +534,7 @@ static void mip4_report_touch(struct mip4_ts *ts, u8 *packet)
} else {
/* Release event */
input_mt_slot(ts->input, id);
- input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, 0);
+ input_mt_report_slot_inactive(ts->input);
}

input_mt_sync_frame(ts->input);
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index a5ab774da4cc..8112bd77afae 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -550,7 +550,7 @@ static int __maybe_unused mms114_suspend(struct device *dev)
/* Release all touch */
for (id = 0; id < MMS114_MAX_TOUCH; id++) {
input_mt_slot(input_dev, id);
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(input_dev);
}

input_mt_report_pointer_emulation(input_dev, true);
diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c
index 69881265d121..147ea4f8f87b 100644
--- a/drivers/input/touchscreen/raspberrypi-ts.c
+++ b/drivers/input/touchscreen/raspberrypi-ts.c
@@ -102,7 +102,7 @@ static void rpi_ts_poll(struct input_polled_dev *dev)
released_ids = ts->known_ids & ~modified_ids;
for_each_set_bit(i, &released_ids, RPI_TS_MAX_SUPPORTED_POINTS) {
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, 0);
+ input_mt_report_slot_inactive(input);
modified_ids &= ~(BIT(i));
}
ts->known_ids = modified_ids;
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index b6f95f20f924..b54cc64e4ea6 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -198,7 +198,7 @@ static void stmfts_report_contact_release(struct stmfts_data *sdata,
u8 slot_id = (event[0] & STMFTS_MASK_TOUCH_ID) >> 4;

input_mt_slot(sdata->input, slot_id);
- input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, false);
+ input_mt_report_slot_inactive(sdata->input);

input_sync(sdata->input);
}
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
index 9e409bb13642..3b8580bd33c1 100644
--- a/include/linux/input/mt.h
+++ b/include/linux/input/mt.h
@@ -100,6 +100,11 @@ static inline bool input_is_mt_axis(int axis)
bool input_mt_report_slot_state(struct input_dev *dev,
unsigned int tool_type, bool active);

+static inline void input_mt_report_slot_inactive(struct input_dev *dev)
+{
+ input_mt_report_slot_state(dev, 0, false);
+}
+
void input_mt_report_finger_count(struct input_dev *dev, int count);
void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count);
void input_mt_drop_unused(struct input_dev *dev);
--
2.17.1

2019-11-22 08:25:47

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary

From: Nick Dyer <[email protected]>

The workaround of reading all messages until an invalid is received is a
way of forcing the CHG line high, which means that when using
edge-triggered interrupts the interrupt can be acquired.

With level-triggered interrupts the workaround is unnecessary.

Also, most recent maXTouch chips have a feature called RETRIGEN which, when
enabled, reasserts the interrupt line every cycle if there are messages
waiting. This also makes the workaround unnecessary.

Note: the RETRIGEN feature is only in some firmware versions/chips, it's
not valid simply to enable the bit.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 1ae4e8281e491b22442cd5acdfca1862555f8ecb)
[gdavis: Fix conflicts due to v4.6-rc7 commit eb43335c4095 ("Input:
atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: reset use_retrigen_workaround at beginning of mxt_check_retrigen()]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 51 ++++++++++++++++++++++--
1 file changed, 48 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ffe8a80f4d0a..ce5a069b62d4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -20,6 +20,7 @@
#include <linux/i2c.h>
#include <linux/input/mt.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/slab.h>
@@ -129,6 +130,7 @@ struct t9_range {
/* MXT_SPT_COMMSCONFIG_T18 */
#define MXT_COMMS_CTRL 0
#define MXT_COMMS_CMD 1
+#define MXT_COMMS_RETRIGEN BIT(6)

/* MXT_DEBUG_DIAGNOSTIC_T37 */
#define MXT_DIAGNOSTIC_PAGEUP 0x01
@@ -308,6 +310,7 @@ struct mxt_data {
struct t7_config t7_cfg;
struct mxt_dbg dbg;
struct gpio_desc *reset_gpio;
+ bool use_retrigen_workaround;

/* Cached parameters from object table */
u16 T5_address;
@@ -318,6 +321,7 @@ struct mxt_data {
u16 T71_address;
u8 T9_reportid_min;
u8 T9_reportid_max;
+ u16 T18_address;
u8 T19_reportid;
u16 T44_address;
u8 T100_reportid_min;
@@ -1190,9 +1194,11 @@ static int mxt_acquire_irq(struct mxt_data *data)

enable_irq(data->irq);

- error = mxt_process_messages_until_invalid(data);
- if (error)
- return error;
+ if (data->use_retrigen_workaround) {
+ error = mxt_process_messages_until_invalid(data);
+ if (error)
+ return error;
+ }

return 0;
}
@@ -1282,6 +1288,33 @@ static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
return crc;
}

+static int mxt_check_retrigen(struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+ int val;
+
+ data->use_retrigen_workaround = false;
+
+ if (irq_get_trigger_type(data->irq) & IRQF_TRIGGER_LOW)
+ return 0;
+
+ if (data->T18_address) {
+ error = __mxt_read_reg(client,
+ data->T18_address + MXT_COMMS_CTRL,
+ 1, &val);
+ if (error)
+ return error;
+
+ if (val & MXT_COMMS_RETRIGEN)
+ return 0;
+ }
+
+ dev_warn(&client->dev, "Enabling RETRIGEN workaround\n");
+ data->use_retrigen_workaround = true;
+ return 0;
+}
+
static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
{
struct device *dev = &data->client->dev;
@@ -1561,6 +1594,10 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)

mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);

+ ret = mxt_check_retrigen(data);
+ if (ret)
+ goto release_mem;
+
ret = mxt_soft_reset(data);
if (ret)
goto release_mem;
@@ -1604,6 +1641,7 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T71_address = 0;
data->T9_reportid_min = 0;
data->T9_reportid_max = 0;
+ data->T18_address = 0;
data->T19_reportid = 0;
data->T44_address = 0;
data->T100_reportid_min = 0;
@@ -1678,6 +1716,9 @@ static int mxt_parse_object_table(struct mxt_data *data,
object->num_report_ids - 1;
data->num_touchids = object->num_report_ids;
break;
+ case MXT_SPT_COMMSCONFIG_T18:
+ data->T18_address = object->start_address;
+ break;
case MXT_SPT_MESSAGECOUNT_T44:
data->T44_address = object->start_address;
break;
@@ -2141,6 +2182,10 @@ static int mxt_initialize(struct mxt_data *data)
msleep(MXT_FW_RESET_TIME);
}

+ error = mxt_check_retrigen(data);
+ if (error)
+ return error;
+
error = mxt_acquire_irq(data);
if (error)
return error;
--
2.17.1

2019-11-22 08:25:51

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 04/48] Input: atmel_mxt_ts - split large i2c transfers into blocks

From: Nick Dyer <[email protected]>

On some firmware variants, the size of the info block exceeds what can
be read in a single transfer.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 74c4f5277cfa403d43fafc404119dc57a08677db)
[gdavis: Forward port and fix conflicts due to v4.14.51 commit
960fe000b1d3 ("Input: atmel_mxt_ts - fix the firmware
update").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: Change mxt_read_blks() to __mxt_read_reg(), original __mxt_read_reg() to
__mxt_read_chunk()]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 28 +++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ce5a069b62d4..9088b2d3266b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -40,7 +40,7 @@
#define MXT_OBJECT_START 0x07
#define MXT_OBJECT_SIZE 6
#define MXT_INFO_CHECKSUM_SIZE 3
-#define MXT_MAX_BLOCK_WRITE 256
+#define MXT_MAX_BLOCK_WRITE 255

/* Object types */
#define MXT_DEBUG_DIAGNOSTIC_T37 37
@@ -624,8 +624,8 @@ static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
return 0;
}

-static int __mxt_read_reg(struct i2c_client *client,
- u16 reg, u16 len, void *val)
+static int __mxt_read_chunk(struct i2c_client *client,
+ u16 reg, u16 len, void *val)
{
struct i2c_msg xfer[2];
u8 buf[2];
@@ -659,6 +659,28 @@ static int __mxt_read_reg(struct i2c_client *client,
return ret;
}

+static int __mxt_read_reg(struct i2c_client *client,
+ u16 reg, u16 len, void *buf)
+{
+ u16 offset = 0;
+ int error;
+ u16 size;
+
+ while (offset < len) {
+ size = min(MXT_MAX_BLOCK_WRITE, len - offset);
+
+ error = __mxt_read_chunk(client,
+ reg + offset,
+ size, buf + offset);
+ if (error)
+ return error;
+
+ offset += size;
+ }
+
+ return 0;
+}
+
static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
const void *val)
{
--
2.17.1

2019-11-22 08:26:03

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 05/48] Input: atmel_mxt_ts - output status from T48 Noise Supression

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 2895a6ff150a49f27a02938f8d262be238b296d8)
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9088b2d3266b..41a69ec5395a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -324,6 +324,7 @@ struct mxt_data {
u16 T18_address;
u8 T19_reportid;
u16 T44_address;
+ u8 T48_reportid;
u8 T100_reportid_min;
u8 T100_reportid_max;

@@ -978,6 +979,24 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
data->update_input = true;
}

+static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status, state;
+
+ status = msg[1];
+ state = msg[4];
+
+ dev_dbg(dev, "T48 state %d status %02X %s%s%s%s%s\n", state, status,
+ status & 0x01 ? "FREQCHG " : "",
+ status & 0x02 ? "APXCHG " : "",
+ status & 0x04 ? "ALGOERR " : "",
+ status & 0x10 ? "STATCHG " : "",
+ status & 0x20 ? "NLVLCHG " : "");
+
+ return 0;
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
@@ -987,6 +1006,8 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)

if (report_id == data->T6_reportid) {
mxt_proc_t6_messages(data, message);
+ } else if (report_id == data->T48_reportid) {
+ mxt_proc_t48_messages(data, message);
} else if (!data->input_dev) {
/*
* Do not report events if input device
@@ -1666,6 +1687,7 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T18_address = 0;
data->T19_reportid = 0;
data->T44_address = 0;
+ data->T48_reportid = 0;
data->T100_reportid_min = 0;
data->T100_reportid_max = 0;
data->max_reportid = 0;
@@ -1747,6 +1769,9 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_SPT_GPIOPWM_T19:
data->T19_reportid = min_id;
break;
+ case MXT_PROCG_NOISESUPPRESSION_T48:
+ data->T48_reportid = min_id;
+ break;
case MXT_TOUCH_MULTITOUCHSCREEN_T100:
data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
data->T100_reportid_min = min_id;
--
2.17.1

2019-11-22 08:26:06

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 02/48] Input: atmel_mxt_ts - rework sysfs init/remove

From: Nick Dyer <[email protected]>

An error in the sysfs init may otherwise interfere with the async return
from the firmware loader

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 3114584ae77c2b03b6dad87174f010d002e9c05d)
[gdavis: Forward port and fixup conflicts. Also fixed sysfs leaks in
both the mxt_initialize() and mxt_probe() error return cases.]
Signed-off-by: George G. Davis <[email protected]>
[jiada: keep call mxt_initialize() before sysfs creation]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 64 +++++++++++++++++++-----
1 file changed, 52 insertions(+), 12 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 6e758af343ea..ffe8a80f4d0a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2086,10 +2086,14 @@ static int mxt_initialize_input_device(struct mxt_data *data)
return 0;

err_free_mem:
+ data->input_dev = NULL;
input_free_device(input_dev);
return error;
}

+static int mxt_sysfs_init(struct mxt_data *data);
+static void mxt_sysfs_remove(struct mxt_data *data);
+
static int mxt_configure_objects(struct mxt_data *data,
const struct firmware *cfg);

@@ -2141,16 +2145,24 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
return error;

+ error = mxt_sysfs_init(data);
+ if (error)
+ return error;
+
error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
&client->dev, GFP_KERNEL, data,
mxt_config_cb);
if (error) {
dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
error);
- return error;
+ goto err_free_sysfs;
}

return 0;
+
+err_free_sysfs:
+ mxt_sysfs_remove(data);
+ return error;
}

static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
@@ -2803,6 +2815,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
if (ret)
goto release_firmware;

+ mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
} else {
@@ -2909,16 +2922,25 @@ static ssize_t mxt_update_fw_store(struct device *dev,
return count;
}

+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
+
+static struct attribute *mxt_fw_attrs[] = {
+ &dev_attr_update_fw.attr,
+ NULL
+};
+
+static const struct attribute_group mxt_fw_attr_group = {
+ .attrs = mxt_fw_attrs,
+};
+
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
-static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_object.attr,
- &dev_attr_update_fw.attr,
NULL
};

@@ -2926,6 +2948,28 @@ static const struct attribute_group mxt_attr_group = {
.attrs = mxt_attrs,
};

+static int mxt_sysfs_init(struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+
+ error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
+ if (error) {
+ dev_err(&client->dev, "Failure %d creating sysfs group\n",
+ error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void mxt_sysfs_remove(struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+
+ sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+}
+
static void mxt_start(struct mxt_data *data)
{
switch (data->suspend_mode) {
@@ -3112,19 +3156,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (error)
return error;

- error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
+ error = sysfs_create_group(&client->dev.kobj, &mxt_fw_attr_group);
if (error) {
- dev_err(&client->dev, "Failure %d creating sysfs group\n",
+ dev_err(&client->dev, "Failure %d creating fw sysfs group\n",
error);
- goto err_free_object;
+ return error;
}

return 0;
-
-err_free_object:
- mxt_free_input_device(data);
- mxt_free_object_table(data);
- return error;
}

static int mxt_remove(struct i2c_client *client)
@@ -3132,7 +3171,8 @@ static int mxt_remove(struct i2c_client *client)
struct mxt_data *data = i2c_get_clientdata(client);

disable_irq(data->irq);
- sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+ sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);

--
2.17.1

2019-11-22 08:26:12

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 06/48] Input: atmel_mxt_ts - output status from T42 Touch Suppression

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit ab95b5a309999d2c098daaa9f88d9fcfae7eb516)
Signed-off-by: George G. Davis <[email protected]>
[jiada: Replace dev_info() with dev_dbg()]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 41a69ec5395a..4e0dae004927 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -155,6 +155,9 @@ struct t37_debug {
#define MXT_RESET_VALUE 0x01
#define MXT_BACKUP_VALUE 0x55

+/* Define for MXT_PROCI_TOUCHSUPPRESSION_T42 */
+#define MXT_T42_MSG_TCHSUP BIT(0)
+
/* T100 Multiple Touch Touchscreen */
#define MXT_T100_CTRL 0
#define MXT_T100_CFG1 1
@@ -323,6 +326,8 @@ struct mxt_data {
u8 T9_reportid_max;
u16 T18_address;
u8 T19_reportid;
+ u8 T42_reportid_min;
+ u8 T42_reportid_max;
u16 T44_address;
u8 T48_reportid;
u8 T100_reportid_min;
@@ -979,6 +984,17 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
data->update_input = true;
}

+static void mxt_proc_t42_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ if (status & MXT_T42_MSG_TCHSUP)
+ dev_dbg(dev, "T42 suppress\n");
+ else
+ dev_dbg(dev, "T42 normal\n");
+}
+
static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
{
struct device *dev = &data->client->dev;
@@ -1006,6 +1022,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)

if (report_id == data->T6_reportid) {
mxt_proc_t6_messages(data, message);
+ } else if (report_id >= data->T42_reportid_min
+ && report_id <= data->T42_reportid_max) {
+ mxt_proc_t42_messages(data, message);
} else if (report_id == data->T48_reportid) {
mxt_proc_t48_messages(data, message);
} else if (!data->input_dev) {
@@ -1686,6 +1705,8 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T9_reportid_max = 0;
data->T18_address = 0;
data->T19_reportid = 0;
+ data->T42_reportid_min = 0;
+ data->T42_reportid_max = 0;
data->T44_address = 0;
data->T48_reportid = 0;
data->T100_reportid_min = 0;
@@ -1763,6 +1784,10 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_SPT_COMMSCONFIG_T18:
data->T18_address = object->start_address;
break;
+ case MXT_PROCI_TOUCHSUPPRESSION_T42:
+ data->T42_reportid_min = min_id;
+ data->T42_reportid_max = max_id;
+ break;
case MXT_SPT_MESSAGECOUNT_T44:
data->T44_address = object->start_address;
break;
--
2.17.1

2019-11-22 08:26:12

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 07/48] Input: atmel_mxt_ts - implement T9 vector/orientation support

From: Nick Dyer <[email protected]>

The atmel touch messages contain orientation information as a byte in a
packed format which can be passed straight on to Android if the input
device configuration is correct.

This requires vector reports to be enabled in maXTouch config (zero
DISVECT bit 3 in T9 CTRL field)

Android converts the format in InputReader.cpp, search for
ORIENTATION_CALIBRATION_VECTOR.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit a6f0ee919d2631678169b23fb18f55b6dbabcd4c)
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 4e0dae004927..405bff1c2055 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -817,6 +817,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
int y;
int area;
int amplitude;
+ u8 vector;

id = message[0] - data->T9_reportid_min;
status = message[1];
@@ -831,9 +832,10 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)

area = message[5];
amplitude = message[6];
+ vector = message[7];

dev_dbg(dev,
- "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+ "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u vector: %02X\n",
id,
(status & MXT_T9_DETECT) ? 'D' : '.',
(status & MXT_T9_PRESS) ? 'P' : '.',
@@ -843,7 +845,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
(status & MXT_T9_AMP) ? 'A' : '.',
(status & MXT_T9_SUPPRESS) ? 'S' : '.',
(status & MXT_T9_UNGRIP) ? 'U' : '.',
- x, y, area, amplitude);
+ x, y, area, amplitude, vector);

input_mt_slot(input_dev, id);

@@ -868,6 +870,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+ input_report_abs(input_dev, ABS_MT_ORIENTATION, vector);
} else {
/* Touch no longer active, close out slot */
input_mt_report_slot_inactive(input_dev);
@@ -2180,8 +2183,9 @@ static int mxt_initialize_input_device(struct mxt_data *data)
0, 255, 0, 0);
}

- if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
- data->t100_aux_vect) {
+ if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+ (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_vect)) {
input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
0, 255, 0, 0);
}
--
2.17.1

2019-11-22 08:26:32

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 10/48] Input: atmel_mxt_ts - implement support for T107 active stylus

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 20e357dd9acf8c2040068c8b22d6bc1401a1893f)
[gdavis: Forward port and fix conflicts due to applying upstream commit
96a938aa214e ("Input: atmel_mxt_ts - remove platform data
support").]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 117 ++++++++++++++++++++++-
1 file changed, 113 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 661bfe4a43b9..0557aea20067 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -72,6 +72,7 @@
#define MXT_SPT_CTECONFIG_T46 46
#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
+#define MXT_PROCI_ACTIVESTYLUS_T107 107

/* MXT_GEN_MESSAGE_T5 object */
#define MXT_RPTID_NOMSG 0xff
@@ -181,6 +182,7 @@ struct t37_debug {
enum t100_type {
MXT_T100_TYPE_FINGER = 1,
MXT_T100_TYPE_PASSIVE_STYLUS = 2,
+ MXT_T100_TYPE_ACTIVE_STYLUS = 3,
MXT_T100_TYPE_HOVERING_FINGER = 4,
MXT_T100_TYPE_GLOVE = 5,
MXT_T100_TYPE_LARGE_TOUCH = 6,
@@ -192,6 +194,16 @@ enum t100_type {
#define MXT_TOUCH_MAJOR_DEFAULT 1
#define MXT_PRESSURE_DEFAULT 1

+/* Gen2 Active Stylus */
+#define MXT_T107_STYLUS_STYAUX 42
+#define MXT_T107_STYLUS_STYAUX_PRESSURE BIT(0)
+#define MXT_T107_STYLUS_STYAUX_PEAK BIT(4)
+
+#define MXT_T107_STYLUS_HOVER BIT(0)
+#define MXT_T107_STYLUS_TIPSWITCH BIT(1)
+#define MXT_T107_STYLUS_BUTTON0 BIT(2)
+#define MXT_T107_STYLUS_BUTTON1 BIT(3)
+
/* Delay times */
#define MXT_BACKUP_TIME 50 /* msec */
#define MXT_RESET_GPIO_TIME 20 /* msec */
@@ -313,10 +325,12 @@ struct mxt_data {
struct t7_config t7_cfg;
struct mxt_dbg dbg;
struct gpio_desc *reset_gpio;
- bool use_retrigen_workaround;
unsigned long t15_keystatus;
int t15_num_keys;
const unsigned int *t15_keymap;
+ u8 stylus_aux_pressure;
+ u8 stylus_aux_peak;
+ bool use_retrigen_workaround;

/* Cached parameters from object table */
u16 T5_address;
@@ -337,6 +351,7 @@ struct mxt_data {
u8 T48_reportid;
u8 T100_reportid_min;
u8 T100_reportid_max;
+ u16 T107_address;

/* for fw update in bootloader */
struct completion bl_completion;
@@ -908,6 +923,8 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
u8 major = 0;
u8 pressure = 0;
u8 orientation = 0;
+ bool active = false;
+ bool hover = false;

id = message[0] - data->T100_reportid_min - 2;

@@ -926,6 +943,8 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
case MXT_T100_TYPE_HOVERING_FINGER:
tool = MT_TOOL_FINGER;
distance = MXT_DISTANCE_HOVERING;
+ hover = true;
+ active = true;

if (data->t100_aux_vect)
orientation = message[data->t100_aux_vect];
@@ -936,6 +955,8 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
case MXT_T100_TYPE_GLOVE:
tool = MT_TOOL_FINGER;
distance = MXT_DISTANCE_ACTIVE_TOUCH;
+ hover = false;
+ active = true;

if (data->t100_aux_area)
major = message[data->t100_aux_area];
@@ -950,6 +971,9 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)

case MXT_T100_TYPE_PASSIVE_STYLUS:
tool = MT_TOOL_PEN;
+ distance = MXT_DISTANCE_ACTIVE_TOUCH;
+ hover = false;
+ active = true;

/*
* Passive stylus is reported with size zero so
@@ -962,6 +986,31 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)

break;

+ case MXT_T100_TYPE_ACTIVE_STYLUS:
+ /* Report input buttons */
+ input_report_key(input_dev, BTN_STYLUS,
+ message[6] & MXT_T107_STYLUS_BUTTON0);
+ input_report_key(input_dev, BTN_STYLUS2,
+ message[6] & MXT_T107_STYLUS_BUTTON1);
+
+ /* stylus in range, but position unavailable */
+ if (!(message[6] & MXT_T107_STYLUS_HOVER))
+ break;
+
+ tool = MT_TOOL_PEN;
+ distance = MXT_DISTANCE_ACTIVE_TOUCH;
+ active = true;
+ major = MXT_TOUCH_MAJOR_DEFAULT;
+
+ if (!(message[6] & MXT_T107_STYLUS_TIPSWITCH)) {
+ hover = true;
+ distance = MXT_DISTANCE_HOVERING;
+ } else if (data->stylus_aux_pressure) {
+ pressure = message[data->stylus_aux_pressure];
+ }
+
+ break;
+
case MXT_T100_TYPE_LARGE_TOUCH:
/* Ignore suppressed touch */
break;
@@ -976,12 +1025,12 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
* Values reported should be non-zero if tool is touching the
* device
*/
- if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+ if (!pressure && !hover)
pressure = MXT_PRESSURE_DEFAULT;

input_mt_slot(input_dev, id);

- if (status & MXT_T100_DETECT) {
+ if (active) {
dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
id, type, x, y, major, pressure, orientation);

@@ -992,6 +1041,7 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+
} else {
dev_dbg(dev, "[%u] release\n", id);

@@ -1863,6 +1913,9 @@ static int mxt_parse_object_table(struct mxt_data *data,
/* first two report IDs reserved */
data->num_touchids = object->num_report_ids - 2;
break;
+ case MXT_PROCI_ACTIVESTYLUS_T107:
+ data->T107_address = object->start_address;
+ break;
}

end_address = object->start_address
@@ -2023,6 +2076,54 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
return 0;
}

+static int mxt_set_up_active_stylus(struct input_dev *input_dev,
+ struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+ struct mxt_object *object;
+ u8 styaux;
+ int aux;
+ u8 ctrl;
+
+ object = mxt_get_object(data, MXT_PROCI_ACTIVESTYLUS_T107);
+ if (!object)
+ return 0;
+
+ error = __mxt_read_reg(client, object->start_address, 1, &ctrl);
+ if (error)
+ return error;
+
+ /* Check enable bit */
+ if (!(ctrl & 0x01))
+ return 0;
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T107_STYLUS_STYAUX,
+ 1, &styaux);
+ if (error)
+ return error;
+
+ /* map aux bits */
+ aux = 7;
+
+ if (styaux & MXT_T107_STYLUS_STYAUX_PRESSURE)
+ data->stylus_aux_pressure = aux++;
+
+ if (styaux & MXT_T107_STYLUS_STYAUX_PEAK)
+ data->stylus_aux_peak = aux++;
+
+ input_set_capability(input_dev, EV_KEY, BTN_STYLUS);
+ input_set_capability(input_dev, EV_KEY, BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
+
+ dev_dbg(&client->dev,
+ "T107 active stylus, aux map pressure:%u peak:%u\n",
+ data->stylus_aux_pressure, data->stylus_aux_peak);
+
+ return 0;
+}
+
static int mxt_read_t100_config(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -2229,7 +2330,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)

if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
(data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
- data->t100_aux_ampl)) {
+ (data->t100_aux_ampl || data->stylus_aux_pressure))) {
input_set_abs_params(input_dev, ABS_MT_PRESSURE,
0, 255, 0, 0);
}
@@ -2247,6 +2348,14 @@ static int mxt_initialize_input_device(struct mxt_data *data)
0, 255, 0, 0);
}

+ /* For T107 Active Stylus */
+ if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->T107_address) {
+ error = mxt_set_up_active_stylus(input_dev, data);
+ if (error)
+ dev_warn(dev, "Failed to read T107 config\n");
+ }
+
/* For T15 Key Array */
if (data->T15_reportid_min) {
data->t15_keystatus = 0;
--
2.17.1

2019-11-22 08:26:36

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 11/48] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs

From: Karl Tsou <[email protected]>

output T92 gesture and T93 touch sequence messages.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit cb98986f8342107bf4a536aed4160b20839e97c1)
Signed-off-by: George G. Davis <[email protected]>
Reported-by: kbuild test robot <[email protected]>
[jiada: changed dev_debug() to dev_info()]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 40 ++++++++++++++++++++++++
1 file changed, 40 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 0557aea20067..1498342c3d98 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -71,6 +71,8 @@
#define MXT_SPT_MESSAGECOUNT_T44 44
#define MXT_SPT_CTECONFIG_T46 46
#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
+#define MXT_PROCI_SYMBOLGESTUREPROCESSOR 92
+#define MXT_PROCI_TOUCHSEQUENCELOGGER 93
#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
#define MXT_PROCI_ACTIVESTYLUS_T107 107

@@ -349,6 +351,10 @@ struct mxt_data {
u8 T42_reportid_max;
u16 T44_address;
u8 T48_reportid;
+ u16 T92_address;
+ u8 T92_reportid;
+ u16 T93_address;
+ u8 T93_reportid;
u8 T100_reportid_min;
u8 T100_reportid_max;
u16 T107_address;
@@ -1113,6 +1119,24 @@ static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
return 0;
}

+static void mxt_proc_t92_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ dev_info(dev, "T92 long stroke LSTR=%d %d\n",
+ (status & 0x80) ? 1 : 0,
+ status & 0x0F);
+}
+
+static void mxt_proc_t93_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ dev_info(dev, "T93 report double tap %d\n", status);
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
@@ -1145,6 +1169,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id >= data->T15_reportid_min
&& report_id <= data->T15_reportid_max) {
mxt_proc_t15_messages(data, message);
+ } else if (report_id == data->T92_reportid) {
+ mxt_proc_t92_messages(data, message);
+ } else if (report_id == data->T93_reportid) {
+ mxt_proc_t93_messages(data, message);
} else {
mxt_dump_message(data, message);
}
@@ -1814,6 +1842,10 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T42_reportid_max = 0;
data->T44_address = 0;
data->T48_reportid = 0;
+ data->T92_reportid = 0;
+ data->T92_address = 0;
+ data->T93_reportid = 0;
+ data->T93_address = 0;
data->T100_reportid_min = 0;
data->T100_reportid_max = 0;
data->max_reportid = 0;
@@ -1906,6 +1938,14 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_PROCG_NOISESUPPRESSION_T48:
data->T48_reportid = min_id;
break;
+ case MXT_PROCI_SYMBOLGESTUREPROCESSOR:
+ data->T92_reportid = min_id;
+ data->T92_address = object->start_address;
+ break;
+ case MXT_PROCI_TOUCHSEQUENCELOGGER:
+ data->T93_reportid = min_id;
+ data->T93_address = object->start_address;
+ break;
case MXT_TOUCH_MULTITOUCHSCREEN_T100:
data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
data->T100_reportid_min = min_id;
--
2.17.1

2019-11-22 08:26:58

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 13/48] Input: atmel_mxt_ts - add regulator control support

From: Nick Dyer <[email protected]>

Allow the driver to optionally manage enabling/disable power to the touch
controller itself. If the regulators are not present then use the deep
sleep power mode instead.

For a correct power on sequence, it is required that we have control over
the RESET line.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 14052b61bb66c2f2283c00e733e131be7a9b8bfc)
[gdavis: Resolve forward port conflicts due to v4.14-rc1 commmit
f657b00df22e ("Input: atmel_mxt_ts - add support for reset
line") and applying upstream commit 96a938aa214e ("Input:
atmel_mxt_ts - remove platform data support").]
Signed-off-by: George G. Davis <[email protected]>
[gdavis: Squash fixes from Dirk Behme:
- Input: atmel_mxt_ts - in failure case disable the regulator
- Input: atmel_mxt_ts - disable only enabled regulators
- Input: atmel_mxt_ts - use devm_regulator_get()]
Signed-off-by: Dirk Behme <[email protected]>
---
Notes:
- Squash fixes by Dirk Behme:
+ Input: atmel_mxt_ts - in failure case disable the regulator

If the second regulator_enable(), disable the previously enabled
regulator, again.
+ Input: atmel_mxt_ts - disable only enabled regulators

As enabling the regulators in mxt_regulator_enable() might fail,
check if the regulators are really enabled and disable them only
in this case.
+ Input: atmel_mxt_ts - use devm_regulator_get()

Switch to devm_regulator_get() enabling us to drop the regulator_put()
in the remove function.

[jiada: Resolve forward port conflicts due to commit
5cecc2bccc03f ("Input: atmel_mxt_ts - fix
-Wunused-const-variable")]
Signed-off-by: Jiada Wang <[email protected]>
---
.../bindings/input/atmel,maxtouch.txt | 6 +
MAINTAINERS | 1 +
drivers/input/touchscreen/atmel_mxt_ts.c | 129 ++++++++++++++++--
include/dt-bindings/input/atmel_mxt_ts.h | 22 +++
4 files changed, 149 insertions(+), 9 deletions(-)
create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index c88919480d37..e28139ce3cae 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -31,6 +31,12 @@ Optional properties for main touchpad device:

- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)

+- atmel,suspend-mode: Select method used to suspend:
+ MXT_SUSPEND_DEEP_SLEEP - use T7 to suspend the device into deep sleep
+ MXT_SUSPEND_T9_CTRL - use T9.CTRL to turn off touch processing
+ MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
+ Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.
+
Example:

touch@4b {
diff --git a/MAINTAINERS b/MAINTAINERS
index c6c34d04ce95..b5358d9bd9c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2787,6 +2787,7 @@ T: git git://github.com/ndyer/linux.git
S: Maintained
F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
F: drivers/input/touchscreen/atmel_mxt_ts.c
+F: include/dt-bindings/input/atmel_mxt_ts.h

ATMEL WIRELESS DRIVER
M: Simon Kelley <[email protected]>
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index cc4f0b5a0ae6..031ba48b6e71 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -26,10 +26,12 @@
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-vmalloc.h>
+#include <dt-bindings/input/atmel_mxt_ts.h>

/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
@@ -215,6 +217,9 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_REGULATOR_DELAY 150 /* msec */
+#define MXT_CHG_DELAY 100 /* msec */
+#define MXT_POWERON_DELAY 150 /* msec */

/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -275,11 +280,6 @@ enum v4l_dbg_inputs {
MXT_V4L_INPUT_MAX,
};

-enum mxt_suspend_mode {
- MXT_SUSPEND_DEEP_SLEEP = 0,
- MXT_SUSPEND_T9_CTRL = 1,
-};
-
/* Config update context */
struct mxt_cfg {
u8 *raw;
@@ -333,6 +333,8 @@ struct mxt_data {
u8 stylus_aux_pressure;
u8 stylus_aux_peak;
bool use_retrigen_workaround;
+ struct regulator *reg_vdd;
+ struct regulator *reg_avdd;

/* Cached parameters from object table */
u16 T5_address;
@@ -2073,6 +2075,94 @@ static int mxt_read_info_block(struct mxt_data *data)
return error;
}

+static void mxt_regulator_enable(struct mxt_data *data)
+{
+ int error;
+
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ gpiod_set_value(data->reset_gpio, 0);
+
+ error = regulator_enable(data->reg_vdd);
+ if (error)
+ return;
+
+ error = regulator_enable(data->reg_avdd);
+ if (error) {
+ regulator_disable(data->reg_vdd);
+ return;
+ }
+
+ /*
+ * According to maXTouch power sequencing specification, RESET line
+ * must be kept low until some time after regulators come up to
+ * voltage
+ */
+ msleep(MXT_REGULATOR_DELAY);
+ gpiod_set_value(data->reset_gpio, 1);
+ msleep(MXT_CHG_DELAY);
+
+retry_wait:
+ reinit_completion(&data->bl_completion);
+ data->in_bootloader = true;
+ error = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_POWERON_DELAY);
+ if (error == -EINTR)
+ goto retry_wait;
+
+ data->in_bootloader = false;
+}
+
+static void mxt_regulator_disable(struct mxt_data *data)
+{
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ if (regulator_is_enabled(data->reg_vdd))
+ regulator_disable(data->reg_vdd);
+ if (regulator_is_enabled(data->reg_avdd))
+ regulator_disable(data->reg_avdd);
+}
+
+static int mxt_probe_regulators(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int error;
+
+ /* Must have reset GPIO to use regulator support */
+ if (!data->reset_gpio) {
+ error = -EINVAL;
+ goto fail;
+ }
+
+ data->reg_vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->reg_vdd)) {
+ error = PTR_ERR(data->reg_vdd);
+ dev_err(dev, "Error %d getting vdd regulator\n", error);
+ goto fail;
+ }
+
+ data->reg_avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(data->reg_avdd)) {
+ error = PTR_ERR(data->reg_avdd);
+ dev_err(dev, "Error %d getting avdd regulator\n", error);
+ goto fail_release;
+ }
+
+ mxt_regulator_enable(data);
+
+ dev_dbg(dev, "Initialised regulators\n");
+ return 0;
+
+fail_release:
+ regulator_put(data->reg_vdd);
+fail:
+ data->reg_vdd = NULL;
+ data->reg_avdd = NULL;
+ return error;
+}
+
static int mxt_read_t9_resolution(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -3139,7 +3229,12 @@ static int mxt_load_fw(struct device *dev, const char *fn)
goto release_firmware;

if (data->suspended) {
- enable_irq(data->irq);
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
+ mxt_regulator_enable(data);
+
+ if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP)
+ enable_irq(data->irq);
+
data->suspended = false;
}

@@ -3345,6 +3440,11 @@ static void mxt_start(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
break;

+ case MXT_SUSPEND_REGULATOR:
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
/*
@@ -3377,6 +3477,12 @@ static void mxt_stop(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
break;

+ case MXT_SUSPEND_REGULATOR:
+ disable_irq(data->irq);
+ mxt_regulator_disable(data);
+ mxt_reset_slots(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
disable_irq(data->irq);
@@ -3469,6 +3575,7 @@ static int mxt_parse_device_properties(struct mxt_data *data)
data->t15_num_keys = n_keys;
}

+ device_property_read_u32(dev, "atmel,suspend-mode", &data->suspend_mode);
return 0;
}

@@ -3555,14 +3662,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}

- disable_irq(client->irq);
-
- if (data->reset_gpio) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ error = mxt_probe_regulators(data);
+ if (error)
+ return error;
+ } else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
}

+ disable_irq(data->irq);
+
error = mxt_initialize(data);
if (error)
return error;
diff --git a/include/dt-bindings/input/atmel_mxt_ts.h b/include/dt-bindings/input/atmel_mxt_ts.h
new file mode 100644
index 000000000000..e4c4c0f6fa37
--- /dev/null
+++ b/include/dt-bindings/input/atmel_mxt_ts.h
@@ -0,0 +1,22 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ * Author: Nick Dyer <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_ATMEL_MXT_TS_H
+#define __DT_BINDINGS_ATMEL_MXT_TS_H
+
+enum mxt_suspend_mode {
+ MXT_SUSPEND_DEEP_SLEEP = 0,
+ MXT_SUSPEND_T9_CTRL = 1,
+ MXT_SUSPEND_REGULATOR = 2,
+};
+
+#endif /* __DT_BINDINGS_ATMEL_MXT_TS_H */
--
2.17.1

2019-11-22 08:26:59

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 14/48] Input: atmel_mxt_ts - report failures in suspend/resume

From: Nick Dyer <[email protected]>

(cherry picked from ndyer/linux/for-upstream commit 93a57575403de4dd07cd64807d3c2ed7f2cca262)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: Fix compilation warning]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 51 ++++++++++++++++++------
1 file changed, 39 insertions(+), 12 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 031ba48b6e71..c551ec93ca54 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3425,10 +3425,12 @@ static void mxt_reset_slots(struct mxt_data *data)
mxt_input_sync(data);
}

-static void mxt_start(struct mxt_data *data)
+static int mxt_start(struct mxt_data *data)
{
+ int ret = 0;
+
if (!data->suspended || data->in_bootloader)
- return;
+ return 0;

switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
@@ -3453,28 +3455,42 @@ static void mxt_start(struct mxt_data *data)
*/
mxt_process_messages_until_invalid(data);

- mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ if (ret)
+ return ret;

/* Recalibrate since chip has been in deep sleep */
- mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+ ret = mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+ if (ret)
+ return ret;
+
+ ret = mxt_acquire_irq(data);
+ if (ret)
+ return ret;

- mxt_acquire_irq(data);
break;
}

data->suspended = false;
+
+ return 0;
}

-static void mxt_stop(struct mxt_data *data)
+static int mxt_stop(struct mxt_data *data)
{
+ int ret;
+
if (data->suspended || data->in_bootloader)
- return;
+ return 0;

switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
/* Touch disable */
- mxt_write_object(data,
+ ret = mxt_write_object(data,
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
+ if (ret)
+ return ret;
+
break;

case MXT_SUSPEND_REGULATOR:
@@ -3487,29 +3503,40 @@ static void mxt_stop(struct mxt_data *data)
default:
disable_irq(data->irq);

- mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+ ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+ if (ret)
+ return ret;

mxt_reset_slots(data);
break;
}

data->suspended = true;
+ return 0;
}

static int mxt_input_open(struct input_dev *dev)
{
struct mxt_data *data = input_get_drvdata(dev);
+ int ret;

- mxt_start(data);
+ ret = mxt_start(data);

- return 0;
+ if (ret)
+ dev_err(&data->client->dev, "%s failed rc=%d\n", __func__, ret);
+
+ return ret;
}

static void mxt_input_close(struct input_dev *dev)
{
struct mxt_data *data = input_get_drvdata(dev);
+ int ret;

- mxt_stop(data);
+ ret = mxt_stop(data);
+
+ if (ret)
+ dev_err(&data->client->dev, "%s failed rc=%d\n", __func__, ret);
}

static int mxt_parse_device_properties(struct mxt_data *data)
--
2.17.1

2019-11-22 08:27:09

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 15/48] Input: atmel_mxt_ts - allow specification of firmware file name

From: Nick Dyer <[email protected]>

On platforms which have multiple device instances using this driver, the
firmware may be different on each device. This patch makes the user give
the name of the firmware file when flashing.

This also prevents accidental triggering of the firmware load process.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 76ebb7cee971cb42dfb0a3a9224403b8b09abcf1)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 43 ++++++++++++++++++++----
1 file changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index c551ec93ca54..a0e367bc6e83 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -33,8 +33,7 @@
#include <media/videobuf2-vmalloc.h>
#include <dt-bindings/input/atmel_mxt_ts.h>

-/* Firmware files */
-#define MXT_FW_NAME "maxtouch.fw"
+/* Configuration file */
#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"

@@ -335,6 +334,7 @@ struct mxt_data {
bool use_retrigen_workaround;
struct regulator *reg_vdd;
struct regulator *reg_avdd;
+ char *fw_name;

/* Cached parameters from object table */
u16 T5_address;
@@ -3207,7 +3207,7 @@ static int mxt_check_firmware_format(struct device *dev,
return -EINVAL;
}

-static int mxt_load_fw(struct device *dev, const char *fn)
+static int mxt_load_fw(struct device *dev)
{
struct mxt_data *data = dev_get_drvdata(dev);
const struct firmware *fw = NULL;
@@ -3217,9 +3217,9 @@ static int mxt_load_fw(struct device *dev, const char *fn)
unsigned int frame = 0;
int ret;

- ret = request_firmware(&fw, fn, dev);
+ ret = request_firmware(&fw, data->fw_name, dev);
if (ret) {
- dev_err(dev, "Unable to open firmware %s\n", fn);
+ dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
return ret;
}

@@ -3339,6 +3339,33 @@ static int mxt_load_fw(struct device *dev, const char *fn)
return ret;
}

+static int mxt_update_file_name(struct device *dev, char **file_name,
+ const char *buf, size_t count)
+{
+ char *file_name_tmp;
+
+ /* Simple sanity check */
+ if (count > 64) {
+ dev_warn(dev, "File name too long\n");
+ return -EINVAL;
+ }
+
+ file_name_tmp = krealloc(*file_name, count + 1, GFP_KERNEL);
+ if (!file_name_tmp)
+ return -ENOMEM;
+
+ *file_name = file_name_tmp;
+ memcpy(*file_name, buf, count);
+
+ /* Echo into the sysfs entry may append newline at the end of buf */
+ if (buf[count - 1] == '\n')
+ (*file_name)[count - 1] = '\0';
+ else
+ (*file_name)[count] = '\0';
+
+ return 0;
+}
+
static ssize_t mxt_update_fw_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -3346,7 +3373,11 @@ static ssize_t mxt_update_fw_store(struct device *dev,
struct mxt_data *data = dev_get_drvdata(dev);
int error;

- error = mxt_load_fw(dev, MXT_FW_NAME);
+ error = mxt_update_file_name(dev, &data->fw_name, buf, count);
+ if (error)
+ return error;
+
+ error = mxt_load_fw(dev);
if (error) {
dev_err(dev, "The firmware update failed(%d)\n", error);
count = error;
--
2.17.1

2019-11-22 08:27:17

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 09/48] Input: atmel_mxt_ts - handle reports from T47 Stylus object

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 56405a5ea08eb34cfe83f3121867c9de0a5c48c1)
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2df3104e94b9..661bfe4a43b9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -823,6 +823,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
int area;
int amplitude;
u8 vector;
+ int tool;

id = message[0] - data->T9_reportid_min;
status = message[1];
@@ -836,6 +837,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
y >>= 2;

area = message[5];
+
amplitude = message[6];
vector = message[7];

@@ -865,12 +867,20 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
mxt_input_sync(data);
}

+ /* A size of zero indicates touch is from a linked T47 Stylus */
+ if (area == 0) {
+ area = MXT_TOUCH_MAJOR_DEFAULT;
+ tool = MT_TOOL_PEN;
+ } else {
+ tool = MT_TOOL_FINGER;
+ }
+
/* if active, pressure must be non-zero */
if (!amplitude)
amplitude = MXT_PRESSURE_DEFAULT;

/* Touch active */
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
+ input_mt_report_slot_state(input_dev, tool, 1);
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
--
2.17.1

2019-11-22 08:27:18

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 17/48] Input: atmel_mxt_ts - allow input name to be specified in platform data

From: Nick Dyer <[email protected]>

Android systems identify the input device and map to IDC file by using the
input device name. To avoid unnecessary deltas to the driver file, allow
this to be set from the platform data.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit cbf94a7bda754d2e1899d9f50313a0bccc91422d)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
.../devicetree/bindings/input/atmel,maxtouch.txt | 2 ++
drivers/input/touchscreen/atmel_mxt_ts.c | 9 ++++++++-
2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index 713ce870805c..d7db16920083 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -40,6 +40,8 @@ Optional properties for main touchpad device:
- atmel,cfg_name: Provide name of configuration file in OBP_RAW format. This
will be downloaded from the firmware loader on probe to the device.

+- atmel,input_name: Override name of input device from the default.
+
Example:

touch@4b {
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 362b7630ec6e..9ee3b6d40c8c 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -336,6 +336,7 @@ struct mxt_data {
char *fw_name;
char *cfg_name;
const char *pcfg_name;
+ const char *input_name;

/* Cached parameters from object table */
u16 T5_address;
@@ -2412,7 +2413,11 @@ static int mxt_initialize_input_device(struct mxt_data *data)
if (!input_dev)
return -ENOMEM;

- input_dev->name = "Atmel maXTouch Touchscreen";
+ if (data->input_name)
+ input_dev->name = data->input_name;
+ else
+ input_dev->name = "Atmel maXTouch Touchscreen";
+
input_dev->phys = data->phys;
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = dev;
@@ -3653,6 +3658,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)

device_property_read_string(dev, "atmel,cfg_name", &data->pcfg_name);

+ device_property_read_string(dev, "atmel,input_name", &data->input_name);
+
if (device_property_present(dev, keymap_property)) {
n_keys = device_property_count_u32(dev, keymap_property);
if (n_keys <= 0) {
--
2.17.1

2019-11-22 08:27:30

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 18/48] Input: atmel_mxt_ts - add config checksum attribute to sysfs

From: karl tsou <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 03477477ddbe5dcad42853ab3f84166a8f807acf)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9ee3b6d40c8c..81e3a71849c0 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3128,6 +3128,15 @@ static int mxt_configure_objects(struct mxt_data *data,
return error;
}

+/* Configuration crc check sum is returned as hex xxxxxx */
+static ssize_t mxt_config_crc_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%06x\n", data->config_crc);
+}
+
/* Firmware Version is returned as Major.Minor.Build */
static ssize_t mxt_fw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -3481,12 +3490,14 @@ static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
+static DEVICE_ATTR(config_crc, S_IRUGO, mxt_config_crc_show, NULL);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_object.attr,
&dev_attr_update_cfg.attr,
+ &dev_attr_config_crc.attr,
NULL
};

--
2.17.1

2019-11-22 08:27:30

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 19/48] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 1bbe20ff3dcd6612e7942c495929eae5c138ece2)
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 59 +++++++++++++++---------
1 file changed, 36 insertions(+), 23 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 81e3a71849c0..44bb77c0159c 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -291,6 +291,22 @@ struct mxt_cfg {
struct mxt_info info;
};

+/* Firmware frame structure */
+struct mxt_fw_frame {
+ __be16 size;
+ u8 data[];
+};
+
+/* Firmware update context */
+struct mxt_flash {
+ const struct firmware *fw;
+ struct mxt_fw_frame *frame;
+ loff_t pos;
+ size_t frame_size;
+ unsigned int count;
+ unsigned int retry;
+};
+
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
@@ -3244,21 +3260,17 @@ static int mxt_check_firmware_format(struct device *dev,
static int mxt_load_fw(struct device *dev)
{
struct mxt_data *data = dev_get_drvdata(dev);
- const struct firmware *fw = NULL;
- unsigned int frame_size;
- unsigned int pos = 0;
- unsigned int retry = 0;
- unsigned int frame = 0;
+ struct mxt_flash f = { 0, };
int ret;

- ret = request_firmware(&fw, data->fw_name, dev);
+ ret = request_firmware(&f.fw, data->fw_name, dev);
if (ret) {
dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
return ret;
}

/* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, fw);
+ ret = mxt_check_firmware_format(dev, f.fw);
if (ret)
goto release_firmware;

@@ -3312,41 +3324,42 @@ static int mxt_load_fw(struct device *dev)
goto disable_irq;
}

- while (pos < fw->size) {
+ while (f.pos < f.fw->size) {
+ f.frame = (struct mxt_fw_frame *)(f.fw->data + f.pos);
+
ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
if (ret)
goto disable_irq;

- frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
-
/* Take account of CRC bytes */
- frame_size += 2;
+ f.frame_size = __be16_to_cpu(f.frame->size) + 2U;

/* Write one frame to device */
- ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+ ret = mxt_bootloader_write(data, f.fw->data + f.pos,
+ f.frame_size);
if (ret)
goto disable_irq;

ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
if (ret) {
- retry++;
+ f.retry++;

/* Back off by 20ms per retry */
- msleep(retry * 20);
+ msleep(f.retry * 20);

- if (retry > 20) {
+ if (f.retry > 20) {
dev_err(dev, "Retry count exceeded\n");
goto disable_irq;
}
} else {
- retry = 0;
- pos += frame_size;
- frame++;
+ f.retry = 0;
+ f.pos += f.frame_size;
+ f.count++;
}

- if (frame % 50 == 0)
- dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
- frame, pos, fw->size);
+ if (f.count % 50 == 0)
+ dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
+ f.count, f.pos, f.fw->size);
}

/* Wait for flash. */
@@ -3355,7 +3368,7 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto disable_irq;

- dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
+ dev_dbg(dev, "Sent %u frames, %lld bytes\n", f.count, f.pos);

/*
* Wait for device to reset. Some bootloader versions do not assert
@@ -3369,7 +3382,7 @@ static int mxt_load_fw(struct device *dev)
disable_irq:
disable_irq(data->irq);
release_firmware:
- release_firmware(fw);
+ release_firmware(f.fw);
return ret;
}

--
2.17.1

2019-11-22 08:27:33

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 20/48] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit bedd706a32522b946467e15f4f4f24de86a1b4d7)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: Squash change from ndyer/linux/for-upstream commit d691d3ee6c6de84b38464a42
3207b3e23cb9dc3a
- Input: atmel_mxt_ts - check firmware format before entering bootloader]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 43 +++++++++++++++---------
1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 44bb77c0159c..04627db23ad2 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3257,23 +3257,10 @@ static int mxt_check_firmware_format(struct device *dev,
return -EINVAL;
}

-static int mxt_load_fw(struct device *dev)
+static int mxt_enter_bootloader(struct mxt_data *data)
{
- struct mxt_data *data = dev_get_drvdata(dev);
- struct mxt_flash f = { 0, };
int ret;

- ret = request_firmware(&f.fw, data->fw_name, dev);
- if (ret) {
- dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
- return ret;
- }
-
- /* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, f.fw);
- if (ret)
- goto release_firmware;
-
if (data->suspended) {
if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
mxt_regulator_enable(data);
@@ -3291,14 +3278,14 @@ static int mxt_load_fw(struct device *dev)
ret = mxt_t6_command(data, MXT_COMMAND_RESET,
MXT_BOOT_VALUE, false);
if (ret)
- goto release_firmware;
+ return ret;

msleep(MXT_RESET_TIME);

/* Do not need to scan since we know family ID */
ret = mxt_lookup_bootloader_address(data, 0);
if (ret)
- goto release_firmware;
+ return ret;

mxt_sysfs_remove(data);
mxt_free_input_device(data);
@@ -3309,6 +3296,30 @@ static int mxt_load_fw(struct device *dev)

reinit_completion(&data->bl_completion);

+ return 0;
+}
+
+static int mxt_load_fw(struct device *dev)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_flash f = { 0, };
+ int ret;
+
+ ret = request_firmware(&f.fw, data->fw_name, dev);
+ if (ret) {
+ dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
+ return ret;
+ }
+
+ /* Check for incorrect enc file */
+ ret = mxt_check_firmware_format(dev, f.fw);
+ if (ret)
+ goto release_firmware;
+
+ ret = mxt_enter_bootloader(data);
+ if (ret)
+ goto release_firmware;
+
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
if (ret) {
/* Bootloader may still be unlocked from previous attempt */
--
2.17.1

2019-11-22 08:27:42

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 23/48] Input: atmel_mxt_ts - rename bl_completion to chg_completion

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit dda8453bfb44216645ede798918a314d4fca2481)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: call complete(&data->chg_completion) only when in_bootloader is TRUE]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 1c5230f7a9af..520dc9670b38 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -381,9 +381,6 @@ struct mxt_data {
u8 T100_reportid_max;
u16 T107_address;

- /* for fw update in bootloader */
- struct completion bl_completion;
-
/* for reset handling */
struct completion reset_completion;

@@ -395,6 +392,9 @@ struct mxt_data {

enum mxt_suspend_mode suspend_mode;

+ /* for power up handling */
+ struct completion chg_completion;
+
/* Indicates whether device is in suspend */
bool suspended;

@@ -611,7 +611,7 @@ static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
* CHG assertion before reading the status byte.
* Once the status byte has been read, the line is deasserted.
*/
- ret = mxt_wait_for_completion(data, &data->bl_completion,
+ ret = mxt_wait_for_completion(data, &data->chg_completion,
MXT_FW_CHG_TIMEOUT);
if (ret) {
/*
@@ -1402,8 +1402,7 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
struct mxt_data *data = dev_id;

if (data->in_bootloader) {
- /* bootloader state transition completion */
- complete(&data->bl_completion);
+ complete(&data->chg_completion);
return IRQ_HANDLED;
}

@@ -2167,9 +2166,9 @@ static void mxt_regulator_enable(struct mxt_data *data)
msleep(MXT_CHG_DELAY);

retry_wait:
- reinit_completion(&data->bl_completion);
+ reinit_completion(&data->chg_completion);
data->in_bootloader = true;
- error = mxt_wait_for_completion(data, &data->bl_completion,
+ error = mxt_wait_for_completion(data, &data->chg_completion,
MXT_POWERON_DELAY);
if (error == -EINTR)
goto retry_wait;
@@ -3334,7 +3333,7 @@ static int mxt_enter_bootloader(struct mxt_data *data)
enable_irq(data->irq);
}

- reinit_completion(&data->bl_completion);
+ reinit_completion(&data->chg_completion);

return 0;
}
@@ -3370,7 +3369,7 @@ static int mxt_load_fw(struct device *dev)
}

/* Wait for flash. */
- ret = mxt_wait_for_completion(data, &data->bl_completion,
+ ret = mxt_wait_for_completion(data, &data->chg_completion,
MXT_FW_RESET_TIME);
if (ret)
goto disable_irq;
@@ -3381,7 +3380,7 @@ static int mxt_load_fw(struct device *dev)
* the CHG line after bootloading has finished, so ignore potential
* errors.
*/
- mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+ mxt_wait_for_completion(data, &data->chg_completion, MXT_FW_RESET_TIME);

data->in_bootloader = false;
disable_irq:
@@ -3802,7 +3801,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
data->irq = client->irq;
i2c_set_clientdata(client, data);

- init_completion(&data->bl_completion);
+ init_completion(&data->chg_completion);
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);

--
2.17.1

2019-11-22 08:27:49

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 25/48] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators

From: Nick Dyer <[email protected]>

The path of enabling the IRQ in the probe function is not safe in level
triggered operation, if it was already powered up and there is a message
waiting on the device (eg finger down) because the object table has not yet
been read. This forces the ISR into a hard loop.

Delay enabling the interrupt until it is first needed.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 64c9dadc4a3250a185baf06ab0f628be45d5d9a0)
[gdavis: Resolve forward port conflicts due to v4.14-rc1 commit
8cc8446b9b62 ("Input: atmel_mxt_ts - use more managed
resources") and applying upstream commit 96a938aa214e ("Input:
atmel_mxt_ts - remove platform data support").]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 40 +++++++++++++++---------
1 file changed, 26 insertions(+), 14 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 842d407efc86..f5d67e43a786 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1451,9 +1451,24 @@ static int mxt_acquire_irq(struct mxt_data *data)
{
int error;

- enable_irq(data->irq);
+ if (!data->irq) {
+ error = devm_request_threaded_irq(&data->client->dev,
+ data->client->irq,
+ NULL, mxt_interrupt,
+ IRQF_ONESHOT,
+ data->client->name, data);
+ if (error) {
+ dev_err(&data->client->dev, "Error requesting irq\n");
+ return error;
+ }
+
+ /* Presence of data->irq means IRQ initialised */
+ data->irq = data->client->irq;
+ } else {
+ enable_irq(data->irq);
+ }

- if (data->use_retrigen_workaround) {
+ if (data->object_table && data->use_retrigen_workaround) {
error = mxt_process_messages_until_invalid(data);
if (error)
return error;
@@ -3373,7 +3388,9 @@ static int mxt_load_fw(struct device *dev)
goto release_firmware;
}

- enable_irq(data->irq);
+ ret = mxt_acquire_irq(data);
+ if (ret)
+ goto release_firmware;

/* Poll after 0.1s if no interrupt received */
schedule_delayed_work(&data->flash->work, msecs_to_jiffies(100));
@@ -3800,7 +3817,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
client->adapter->nr, client->addr);

data->client = client;
- data->irq = client->irq;
i2c_set_clientdata(client, data);

init_completion(&data->chg_completion);
@@ -3828,26 +3844,22 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}

- error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, mxt_interrupt, IRQF_ONESHOT,
- client->name, data);
- if (error) {
- dev_err(&client->dev, "Failed to register interrupt\n");
- return error;
- }
-
if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ error = mxt_acquire_irq(data);
+ if (error)
+ return error;
+
error = mxt_probe_regulators(data);
if (error)
return error;
+
+ disable_irq(data->irq);
} else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
}

- disable_irq(data->irq);
-
error = mxt_initialize(data);
if (error)
return error;
--
2.17.1

2019-11-22 08:28:04

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 30/48] Input: atmel_mxt_ts - eliminate data->raw_info_block

Dynamically allocated in mxt_read_info_block() buffer buf is assigned
both to data->info and data->raw_info_block, having both data->info
and data->raw_info_block is redundant and confusing.

This patch eliminates data->raw_info_block.

Signed-off-by: Jiada Wang <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Vladimir Zapolskiy <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index db91caff40e4..54e2d5f81af9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -323,7 +323,6 @@ struct mxt_data {
char phys[64]; /* device physical location */
struct mxt_object *object_table;
struct mxt_info *info;
- void *raw_info_block;
unsigned int irq;
unsigned int max_x;
unsigned int max_y;
@@ -2070,9 +2069,8 @@ static void mxt_free_object_table(struct mxt_data *data)
v4l2_device_unregister(&data->dbg.v4l2);
#endif
data->object_table = NULL;
+ kfree(data->info);
data->info = NULL;
- kfree(data->raw_info_block);
- data->raw_info_block = NULL;
kfree(data->msg_buf);
data->msg_buf = NULL;
data->T5_address = 0;
@@ -2241,7 +2239,7 @@ static int mxt_read_info_block(struct mxt_data *data)
u8 *crc_ptr;

/* If info block already allocated, free it */
- if (data->raw_info_block)
+ if (data->info)
mxt_free_object_table(data);

/* Read 7-byte ID information block starting at address 0 */
@@ -2292,7 +2290,6 @@ static int mxt_read_info_block(struct mxt_data *data)
goto err_free_mem;
}

- data->raw_info_block = id_buf;
data->info = (struct mxt_info *)id_buf;

dev_info(&client->dev,
--
2.17.1

2019-11-22 08:28:04

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 28/48] Input: atmel_mxt_ts - implement debug output for messages

From: Nick Dyer <[email protected]>

Add a debug switch which causes all messages from the touch controller to
be dumped to the dmesg log with a set prefix "MXT MSG:". This is used by
Atmel user-space utilities to debug touch operation. Enabling this output
does impact touch performance.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 3c3fcfdd4889dfeb1c80ae8cd94a622c6342b06a)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 47 ++++++++++++++++++++++--
1 file changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index de77079e3324..6f4274a1c7e0 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -335,6 +335,7 @@ struct mxt_data {
u8 t100_aux_ampl;
u8 t100_aux_area;
u8 t100_aux_vect;
+ bool debug_enabled;
u8 max_reportid;
u32 config_crc;
u32 info_crc;
@@ -460,8 +461,11 @@ static bool mxt_object_readable(unsigned int type)

static void mxt_dump_message(struct mxt_data *data, u8 *message)
{
- dev_dbg(&data->client->dev, "message: %*ph\n",
- data->T5_msg_size, message);
+ /* debug message with prefix 'MXT MSG:' used by
+ * Atmel user-space utilities to debug touch operation
+ */
+ dev_dbg(&data->client->dev, "MXT MSG: %*ph\n",
+ data->T5_msg_size, message);
}

static int mxt_wait_for_completion(struct mxt_data *data,
@@ -1214,6 +1218,7 @@ static void mxt_proc_t93_messages(struct mxt_data *data, u8 *msg)
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
+ bool dump = data->debug_enabled;

if (report_id == MXT_RPTID_NOMSG)
return 0;
@@ -1248,9 +1253,12 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id == data->T93_reportid) {
mxt_proc_t93_messages(data, message);
} else {
- mxt_dump_message(data, message);
+ dump = true;
}

+ if (dump)
+ mxt_dump_message(data, message);
+
return 1;
}

@@ -3522,6 +3530,36 @@ static ssize_t mxt_update_cfg_store(struct device *dev,
return ret;
}

+static ssize_t mxt_debug_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ char c;
+
+ c = data->debug_enabled ? '1' : '0';
+ return scnprintf(buf, PAGE_SIZE, "%c\n", c);
+}
+
+static ssize_t mxt_debug_enable_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ u8 i;
+ ssize_t ret;
+
+ if (kstrtou8(buf, 0, &i) == 0 && i < 2) {
+ data->debug_enabled = (i == 1);
+
+ dev_dbg(dev, "%s\n", i ? "debug enabled" : "debug disabled");
+ ret = count;
+ } else {
+ dev_dbg(dev, "debug_enabled write error\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);

static struct attribute *mxt_fw_attrs[] = {
@@ -3538,6 +3576,8 @@ static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
static DEVICE_ATTR(config_crc, S_IRUGO, mxt_config_crc_show, NULL);
+static DEVICE_ATTR(debug_enable, S_IWUSR | S_IRUSR, mxt_debug_enable_show,
+ mxt_debug_enable_store);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3545,6 +3585,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_object.attr,
&dev_attr_update_cfg.attr,
&dev_attr_config_crc.attr,
+ &dev_attr_debug_enable.attr,
NULL
};

--
2.17.1

2019-11-22 08:28:11

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 29/48] Input: atmel_mxt_ts - implement improved debug message interface

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 078569c13c88dcb6f8d882bfe17168587712df7d)
[gdavis: Resolve forward port conflicts due to v4.14.51 commit
960fe000b1d3 ("Input: atmel_mxt_ts - fix the firmware
update").]
Signed-off-by: George G. Davis <[email protected]>
[gdavis: Squash fixes from Dirk Behme:
- Input: atmel_mxt_ts - add missing unlock in error path
- Input: atmel_mxt_ts - add missing unlock in error path
- Input: atmel_mxt_ts - call mxt_debug_msg_remove() in error path
- Input: atmel_mxt_ts - protect debug_v2_enabled by mutex
Signed-off-by: Dirk Behme <[email protected]>
[gdavis: Squash fix from Vladimir Zapolskiy:
- Input: atmel_mxt_ts - simplify debug_msg binary attribute
handling]
Signed-off-by: Vladimir Zapolskiy <[email protected]>
---
Notes:
- Squash fixes from Dirk Behme:
+ Input: atmel_mxt_ts - add missing unlock in error path

Unlock the mutex in case the function is exited in the error case.
+ Input: atmel_mxt_ts - add missing unlock in error path
+ Input: atmel_mxt_ts - protect debug_v2_enabled by mutex

Put the modification of debug_v2_enabled into the protected section.
Same as in mxt_debug_msg_enable().
+ Input: atmel_mxt_ts - call mxt_debug_msg_remove() in error path

Add the missing mxt_debug_msg_remove() to the error path.
- Squash fix from Vladimir Zapolskiy:
+ Input: atmel_mxt_ts - simplify debug_msg binary attribute handling

The change introduces several updates, but all of them are related to
"debug_msg" binary attribute:

* removed dynamic initialization of data->debug_msg_attr
* removed mxt_debug_msg_write callback
* removed wrong check in mxt_debug_msg_remove()
* mxt_debug_msg_remove() now is not called from mxt_free_object_table()
avoiding multiple double deallocations.

[jiada: Add NULL check for sysfs attribute debug_msg_attr]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 194 ++++++++++++++++++++++-
1 file changed, 192 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 6f4274a1c7e0..db91caff40e4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -242,6 +242,8 @@ enum t100_type {

#define MXT_PIXELS_PER_MM 20

+#define DEBUG_MSG_MAX 200
+
struct mxt_info {
u8 family_id;
u8 variant_id;
@@ -336,6 +338,11 @@ struct mxt_data {
u8 t100_aux_area;
u8 t100_aux_vect;
bool debug_enabled;
+ bool debug_v2_enabled;
+ u8 *debug_msg_data;
+ u16 debug_msg_count;
+ struct bin_attribute *debug_msg_attr;
+ struct mutex debug_msg_lock;
u8 max_reportid;
u32 config_crc;
u32 info_crc;
@@ -468,6 +475,144 @@ static void mxt_dump_message(struct mxt_data *data, u8 *message)
data->T5_msg_size, message);
}

+static void mxt_debug_msg_enable(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+
+ if (data->debug_v2_enabled)
+ return;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ data->debug_msg_data = kcalloc(DEBUG_MSG_MAX,
+ data->T5_msg_size, GFP_KERNEL);
+ if (!data->debug_msg_data) {
+ mutex_unlock(&data->debug_msg_lock);
+ return;
+ }
+
+ data->debug_v2_enabled = true;
+ mutex_unlock(&data->debug_msg_lock);
+
+ dev_dbg(dev, "Enabled message output\n");
+}
+
+static void mxt_debug_msg_disable(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+
+ if (!data->debug_v2_enabled)
+ return;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ data->debug_v2_enabled = false;
+
+ kfree(data->debug_msg_data);
+ data->debug_msg_data = NULL;
+ data->debug_msg_count = 0;
+ mutex_unlock(&data->debug_msg_lock);
+ dev_dbg(dev, "Disabled message output\n");
+}
+
+static void mxt_debug_msg_add(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ if (!data->debug_msg_data) {
+ mutex_unlock(&data->debug_msg_lock);
+ dev_err(dev, "No buffer!\n");
+ return;
+ }
+
+ if (data->debug_msg_count < DEBUG_MSG_MAX) {
+ memcpy(data->debug_msg_data +
+ data->debug_msg_count * data->T5_msg_size,
+ msg,
+ data->T5_msg_size);
+ data->debug_msg_count++;
+ } else {
+ dev_dbg(dev, "Discarding %u messages\n", data->debug_msg_count);
+ data->debug_msg_count = 0;
+ }
+
+ mutex_unlock(&data->debug_msg_lock);
+
+ sysfs_notify(&data->client->dev.kobj, NULL, "debug_notify");
+}
+
+static ssize_t mxt_debug_msg_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t bytes)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct mxt_data *data = dev_get_drvdata(dev);
+ int count;
+ size_t bytes_read;
+
+ if (!data->debug_msg_data) {
+ dev_err(dev, "No buffer!\n");
+ return 0;
+ }
+
+ count = bytes / data->T5_msg_size;
+
+ if (count > DEBUG_MSG_MAX)
+ count = DEBUG_MSG_MAX;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ if (count > data->debug_msg_count)
+ count = data->debug_msg_count;
+
+ bytes_read = count * data->T5_msg_size;
+
+ memcpy(buf, data->debug_msg_data, bytes_read);
+ data->debug_msg_count = 0;
+
+ mutex_unlock(&data->debug_msg_lock);
+
+ return bytes_read;
+}
+
+static struct bin_attribute debug_msg_attr = {
+ .attr = {
+ .name = "debug_msg",
+ .mode = 0444,
+ },
+ .read = mxt_debug_msg_read,
+};
+
+static int mxt_debug_msg_init(struct mxt_data *data)
+{
+ /*
+ * Binary attribute is not used in callback, removal is done by name,
+ * so it is safe to update a single struct bin_attribute entity
+ */
+ debug_msg_attr.size = data->T5_msg_size * DEBUG_MSG_MAX;
+
+ if (sysfs_create_bin_file(&data->client->dev.kobj,
+ &debug_msg_attr) < 0) {
+ dev_err(&data->client->dev, "Failed to create %s\n",
+ debug_msg_attr.attr.name);
+ return -EINVAL;
+ }
+
+ data->debug_msg_attr = &debug_msg_attr;
+
+ return 0;
+}
+
+static void mxt_debug_msg_remove(struct mxt_data *data)
+{
+ if (data->debug_msg_attr) {
+ sysfs_remove_bin_file(&data->client->dev.kobj,
+ data->debug_msg_attr);
+ data->debug_msg_attr = NULL;
+ }
+}
+
static int mxt_wait_for_completion(struct mxt_data *data,
struct completion *comp,
unsigned int timeout_ms)
@@ -1259,6 +1404,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
if (dump)
mxt_dump_message(data, message);

+ if (data->debug_v2_enabled)
+ mxt_debug_msg_add(data, message);
+
return 1;
}

@@ -2677,6 +2825,10 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
return error;

+ error = mxt_debug_msg_init(data);
+ if (error)
+ goto err_free_sysfs;
+
if (data->cfg_name) {
error = request_firmware_nowait(THIS_MODULE, true,
data->cfg_name,
@@ -2686,16 +2838,18 @@ static int mxt_initialize(struct mxt_data *data)
if (error) {
dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
error);
- goto err_free_sysfs;
+ goto err_free_dbg_msg;
}
} else {
error = mxt_configure_objects(data, NULL);
if (error)
- goto err_free_sysfs;
+ goto err_free_dbg_msg;
}

return 0;

+err_free_dbg_msg:
+ mxt_debug_msg_remove(data);
err_free_sysfs:
mxt_sysfs_remove(data);
return error;
@@ -3357,6 +3511,7 @@ static int mxt_enter_bootloader(struct mxt_data *data)
return ret;

data->in_bootloader = true;
+ mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
@@ -3540,6 +3695,34 @@ static ssize_t mxt_debug_enable_show(struct device *dev,
return scnprintf(buf, PAGE_SIZE, "%c\n", c);
}

+static ssize_t mxt_debug_notify_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t mxt_debug_v2_enable_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ u8 i;
+ ssize_t ret;
+
+ if (kstrtou8(buf, 0, &i) == 0 && i < 2) {
+ if (i == 1)
+ mxt_debug_msg_enable(data);
+ else
+ mxt_debug_msg_disable(data);
+
+ ret = count;
+ } else {
+ dev_dbg(dev, "debug_enabled write error\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static ssize_t mxt_debug_enable_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
@@ -3578,6 +3761,9 @@ static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
static DEVICE_ATTR(config_crc, S_IRUGO, mxt_config_crc_show, NULL);
static DEVICE_ATTR(debug_enable, S_IWUSR | S_IRUSR, mxt_debug_enable_show,
mxt_debug_enable_store);
+static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
+ mxt_debug_v2_enable_store);
+static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3586,6 +3772,8 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_update_cfg.attr,
&dev_attr_config_crc.attr,
&dev_attr_debug_enable.attr,
+ &dev_attr_debug_v2_enable.attr,
+ &dev_attr_debug_notify.attr,
NULL
};

@@ -3874,6 +4062,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
init_completion(&data->chg_completion);
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);
+ mutex_init(&data->debug_msg_lock);

data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
@@ -3932,6 +4121,7 @@ static int mxt_remove(struct i2c_client *client)

disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
--
2.17.1

2019-11-22 08:28:22

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 33/48] input: atmel_mxt_ts: export GPIO reset line via sysfs

From: "George G. Davis" <[email protected]>

N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will
cause problems with normal driver operation. This feature is provided
as a diagnostic debug aid. It does not take into consideration any
pending operations which may be in progress. Modifying the atmel_mxt_ts
GPIO reset line at any time will inevitably cause the driver to fail.

Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Rajeev Kumar <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 3513413158c3..f357d353447f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4085,6 +4085,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}

+ if (data->reset_gpio) {
+ error = gpiod_export(data->reset_gpio, 0);
+ if (error)
+ return error;
+
+ error = gpiod_export_link(&client->dev, "reset",
+ data->reset_gpio);
+ if (error) {
+ gpiod_unexport(data->reset_gpio);
+ return error;
+ }
+ }
+
if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
error = mxt_acquire_irq(data);
if (error)
@@ -4117,6 +4130,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
err_free_object:
mxt_free_input_device(data);
mxt_free_object_table(data);
+ if (data->reset_gpio) {
+ sysfs_remove_link(&client->dev.kobj, "reset");
+ gpiod_unexport(data->reset_gpio);
+ }
return error;
}

@@ -4126,6 +4143,10 @@ static int mxt_remove(struct i2c_client *client)

disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ if (data->reset_gpio) {
+ sysfs_remove_link(&client->dev.kobj, "reset");
+ gpiod_unexport(data->reset_gpio);
+ }
mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
--
2.17.1

2019-11-22 08:28:26

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 08/48] Input: atmel_mxt_ts - implement T15 Key Array support

From: Nick Dyer <[email protected]>

There is a key array object in many maXTouch chips which allows some X/Y
lines to be used as a key array. This patch maps them to a series of keys
which may be configured in a platform data array.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 15bb074b5abf3a101f7b79544213f1c110ea4cab)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: Fix compilation warning]
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 85 ++++++++++++++++++++++++
1 file changed, 85 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 405bff1c2055..2df3104e94b9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -314,6 +314,9 @@ struct mxt_data {
struct mxt_dbg dbg;
struct gpio_desc *reset_gpio;
bool use_retrigen_workaround;
+ unsigned long t15_keystatus;
+ int t15_num_keys;
+ const unsigned int *t15_keymap;

/* Cached parameters from object table */
u16 T5_address;
@@ -324,6 +327,8 @@ struct mxt_data {
u16 T71_address;
u8 T9_reportid_min;
u8 T9_reportid_max;
+ u8 T15_reportid_min;
+ u8 T15_reportid_max;
u16 T18_address;
u8 T19_reportid;
u8 T42_reportid_min;
@@ -987,6 +992,38 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
data->update_input = true;
}

+static void mxt_proc_t15_messages(struct mxt_data *data, u8 *msg)
+{
+ struct input_dev *input_dev = data->input_dev;
+ struct device *dev = &data->client->dev;
+ int key;
+ bool curr_state, new_state;
+ bool sync = false;
+ unsigned long keystates = le32_to_cpu((__force __le32)msg[2]);
+
+ for (key = 0; key < data->t15_num_keys; key++) {
+ curr_state = test_bit(key, &data->t15_keystatus);
+ new_state = test_bit(key, &keystates);
+
+ if (!curr_state && new_state) {
+ dev_dbg(dev, "T15 key press: %u\n", key);
+ __set_bit(key, &data->t15_keystatus);
+ input_event(input_dev, EV_KEY,
+ data->t15_keymap[key], 1);
+ sync = true;
+ } else if (curr_state && !new_state) {
+ dev_dbg(dev, "T15 key release: %u\n", key);
+ __clear_bit(key, &data->t15_keystatus);
+ input_event(input_dev, EV_KEY,
+ data->t15_keymap[key], 0);
+ sync = true;
+ }
+ }
+
+ if (sync)
+ input_sync(input_dev);
+}
+
static void mxt_proc_t42_messages(struct mxt_data *data, u8 *msg)
{
struct device *dev = &data->client->dev;
@@ -1045,6 +1082,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id == data->T19_reportid) {
mxt_input_button(data, message);
data->update_input = true;
+ } else if (report_id >= data->T15_reportid_min
+ && report_id <= data->T15_reportid_max) {
+ mxt_proc_t15_messages(data, message);
} else {
mxt_dump_message(data, message);
}
@@ -1706,6 +1746,8 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T71_address = 0;
data->T9_reportid_min = 0;
data->T9_reportid_max = 0;
+ data->T15_reportid_min = 0;
+ data->T15_reportid_max = 0;
data->T18_address = 0;
data->T19_reportid = 0;
data->T42_reportid_min = 0;
@@ -1784,6 +1826,10 @@ static int mxt_parse_object_table(struct mxt_data *data,
object->num_report_ids - 1;
data->num_touchids = object->num_report_ids;
break;
+ case MXT_TOUCH_KEYARRAY_T15:
+ data->T15_reportid_min = min_id;
+ data->T15_reportid_max = max_id;
+ break;
case MXT_SPT_COMMSCONFIG_T18:
data->T18_address = object->start_address;
break;
@@ -2077,6 +2123,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)
int error;
unsigned int num_mt_slots;
unsigned int mt_flags = 0;
+ int i;

switch (data->multitouch) {
case MXT_TOUCH_MULTI_T9:
@@ -2190,6 +2237,15 @@ static int mxt_initialize_input_device(struct mxt_data *data)
0, 255, 0, 0);
}

+ /* For T15 Key Array */
+ if (data->T15_reportid_min) {
+ data->t15_keystatus = 0;
+
+ for (i = 0; i < data->t15_num_keys; i++)
+ input_set_capability(input_dev, EV_KEY,
+ data->t15_keymap[i]);
+ }
+
input_set_drvdata(input_dev, data);

error = input_register_device(input_dev);
@@ -3148,8 +3204,10 @@ static void mxt_input_close(struct input_dev *dev)
static int mxt_parse_device_properties(struct mxt_data *data)
{
static const char keymap_property[] = "linux,gpio-keymap";
+ static const char buttons_property[] = "atmel,key-buttons";
struct device *dev = &data->client->dev;
u32 *keymap;
+ u32 *buttonmap;
int n_keys;
int error;

@@ -3179,6 +3237,33 @@ static int mxt_parse_device_properties(struct mxt_data *data)
data->t19_num_keys = n_keys;
}

+ if (device_property_present(dev, buttons_property)) {
+ n_keys = device_property_read_u32_array(dev, buttons_property,
+ NULL, 0);
+ if (n_keys <= 0) {
+ error = n_keys < 0 ? n_keys : -EINVAL;
+ dev_err(dev, "invalid/malformed '%s' property: %d\n",
+ buttons_property, error);
+ return error;
+ }
+
+ buttonmap = devm_kmalloc_array(dev, n_keys, sizeof(*buttonmap),
+ GFP_KERNEL);
+ if (!buttonmap)
+ return -ENOMEM;
+
+ error = device_property_read_u32_array(dev, buttons_property,
+ buttonmap, n_keys);
+ if (error) {
+ dev_err(dev, "failed to parse '%s' property: %d\n",
+ buttons_property, error);
+ return error;
+ }
+
+ data->t15_keymap = buttonmap;
+ data->t15_num_keys = n_keys;
+ }
+
return 0;
}

--
2.17.1

2019-11-22 08:28:38

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 36/48] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction

From: Balasubramani Vivekanandan <[email protected]>

In mxt_process_messages_until_invalid() function, driver tries to read
all possible reportid in a single i2c transaction. Number of bytes read
is limited by the max_reportid parameter.
If the max_reportid is a very large value, then a large chunk of bytes
will be requested from the controller in a single i2c transaction.
This transaction can fail due to timeout. This is visible when the
Atmel controller is connected to the SOC via a i2c mux hardware.

mxt_process_messages_t44() reads the T44 message which contains the
pending T5 message count. If the number of pending T5 messages returned
by T44 message is too high then there is a risk of i2c transaction
timeout while reading T5 messages in mxt_process_messages_t44().

New property 'atmel,mtu' is created. This property limits the maximum
number of bytes that can read/transferred in an i2c transcation

Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
.../bindings/input/atmel,maxtouch.txt | 3 +
drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++++----
2 files changed, 54 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index d7db16920083..62c93d94bc5d 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -42,6 +42,8 @@ Optional properties for main touchpad device:

- atmel,input_name: Override name of input device from the default.

+- atmel,mtu: Maximum number of bytes that can read/transferred in an i2c transaction
+
Example:

touch@4b {
@@ -49,4 +51,5 @@ Example:
reg = <0x4b>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+ atmel,mtu = <200>
};
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 74866015572f..054aacc768b8 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -417,6 +417,7 @@ struct mxt_data {
/* Indicates whether device is updating configuration */
bool updating_config;

+ unsigned int mtu;
bool t25_status;
};

@@ -1465,11 +1466,32 @@ static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
return num_valid;
}

+static u8 mxt_max_msg_read_count(struct mxt_data *data, u8 max_T5_msg_count)
+{
+ u8 T5_msg_count_limit = data->mtu / data->T5_msg_size;
+
+ if (!data->mtu)
+ return max_T5_msg_count;
+
+ if (data->mtu < data->T5_msg_size) {
+ WARN(1, "mtu set is lesser than the T5 message size\n");
+ /* Return count of 1, as fallback */
+ return 1;
+ }
+ /*
+ * Return maximum number of T5 messages in single i2c transaction
+ * based on "atmel,mtu" property.
+ */
+ return min(T5_msg_count_limit, max_T5_msg_count);
+}
+
static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
int ret;
- u8 count, num_left;
+ u8 T5_msg_count, total_pending;
+ u8 total_processed = 0;
+ u8 processed_valid = 0;

/* Read T44 and T5 together */
ret = __mxt_read_reg(data->client, data->T44_address,
@@ -1479,18 +1501,19 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
return IRQ_NONE;
}

- count = data->msg_buf[0];
+ T5_msg_count = data->msg_buf[0];

/*
* This condition may be caused by the CHG line being configured in
* Mode 0. It results in unnecessary I2C operations but it is benign.
*/
- if (count == 0)
+ if (!T5_msg_count)
return IRQ_NONE;

- if (count > data->max_reportid) {
- dev_warn(dev, "T44 count %d exceeded max report id\n", count);
- count = data->max_reportid;
+ if (T5_msg_count > data->max_reportid) {
+ dev_warn(dev, "T44 count %d exceeded max report id\n",
+ T5_msg_count);
+ T5_msg_count = data->max_reportid;
}

/* Process first message */
@@ -1500,16 +1523,25 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
return IRQ_NONE;
}

- num_left = count - 1;
+ total_pending = T5_msg_count - 1;
+ if (!total_pending)
+ goto end;

/* Process remaining messages if necessary */
- if (num_left) {
- ret = mxt_read_and_process_messages(data, num_left);
+ T5_msg_count = mxt_max_msg_read_count(data, total_pending);
+
+ do {
+ if ((total_pending - total_processed) < T5_msg_count)
+ T5_msg_count = total_pending - total_processed;
+ ret = mxt_read_and_process_messages(data, T5_msg_count);
if (ret < 0)
goto end;
- else if (ret != num_left)
- dev_warn(dev, "Unexpected invalid message\n");
- }
+ total_processed += T5_msg_count;
+ processed_valid += ret;
+ } while (total_processed < total_pending);
+
+ if (processed_valid != total_pending)
+ dev_warn(dev, "Unexpected invalid message\n");

end:
if (data->update_input) {
@@ -1524,9 +1556,10 @@ static int mxt_process_messages_until_invalid(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
int count, read;
- u8 tries = 2;
+ int tries;

- count = data->max_reportid;
+ count = mxt_max_msg_read_count(data, data->max_reportid);
+ tries = (data->max_reportid / count) + 1;

/* Read messages until we force an invalid */
do {
@@ -4112,6 +4145,10 @@ static int mxt_parse_device_properties(struct mxt_data *data)
}

device_property_read_u32(dev, "atmel,suspend-mode", &data->suspend_mode);
+ device_property_read_u32(dev, "atmel,mtu", &data->mtu);
+ if (data->mtu)
+ dev_dbg(dev, "mtu is set as %d\n", data->mtu);
+
return 0;
}

--
2.17.1

2019-11-22 08:28:43

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 12/48] Input: atmel_mxt_ts - release touch state during suspend

From: Nick Dyer <[email protected]>

If fingers are down as the MXT chip goes into suspend it does not send a
lift message. In addition, it may not complete its final measurement cycle
immediately, which means touch messages may be received by the interrupt
handler after mxt_stop() has completed.

So:
- disable irq during suspend
- flush any messages created after suspend
- tell app layer that slots were released at suspend

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Benson Leung <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 26794433086dbc7dea18d2f6a1c8d61ab25bcfda)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[gdavis: Squash fix from Dirk Behme:
- Input: atmel_mxt_ts - remove superfluous data->suspended]
Signed-off-by: Dirk Behme <[email protected]>
---
Notes:
- Squash fix from Dirk Behme:
+ Input: atmel_mxt_ts - remove superfluous data->suspended

data->suspended is already set to false in mxt_load_fw(), so it's not
needed here.

Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 52 ++++++++++++++++++++++--
1 file changed, 49 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 1498342c3d98..cc4f0b5a0ae6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -372,6 +372,9 @@ struct mxt_data {
unsigned int t19_num_keys;

enum mxt_suspend_mode suspend_mode;
+
+ /* Indicates whether device is in suspend */
+ bool suspended;
};

struct mxt_vb2_buffer {
@@ -1151,10 +1154,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
mxt_proc_t42_messages(data, message);
} else if (report_id == data->T48_reportid) {
mxt_proc_t48_messages(data, message);
- } else if (!data->input_dev) {
+ } else if (!data->input_dev || data->suspended) {
/*
- * Do not report events if input device
- * is not yet registered.
+ * Do not report events if input device is not
+ * yet registered or returning from suspend
*/
mxt_dump_message(data, message);
} else if (report_id >= data->T9_reportid_min &&
@@ -3135,6 +3138,11 @@ static int mxt_load_fw(struct device *dev, const char *fn)
if (ret)
goto release_firmware;

+ if (data->suspended) {
+ enable_irq(data->irq);
+ data->suspended = false;
+ }
+
if (!data->in_bootloader) {
/* Change to the bootloader mode */
data->in_bootloader = true;
@@ -3306,8 +3314,27 @@ static void mxt_sysfs_remove(struct mxt_data *data)
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
}

+static void mxt_reset_slots(struct mxt_data *data)
+{
+ struct input_dev *input_dev = data->input_dev;
+ int id;
+
+ if (!input_dev)
+ return;
+
+ for (id = 0; id < data->num_touchids; id++) {
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+ }
+
+ mxt_input_sync(data);
+}
+
static void mxt_start(struct mxt_data *data)
{
+ if (!data->suspended || data->in_bootloader)
+ return;
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
mxt_soft_reset(data);
@@ -3320,16 +3347,29 @@ static void mxt_start(struct mxt_data *data)

case MXT_SUSPEND_DEEP_SLEEP:
default:
+ /*
+ * Discard any touch messages still in message buffer
+ * from before chip went to sleep
+ */
+ mxt_process_messages_until_invalid(data);
+
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);

/* Recalibrate since chip has been in deep sleep */
mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+
+ mxt_acquire_irq(data);
break;
}
+
+ data->suspended = false;
}

static void mxt_stop(struct mxt_data *data)
{
+ if (data->suspended || data->in_bootloader)
+ return;
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
/* Touch disable */
@@ -3339,9 +3379,15 @@ static void mxt_stop(struct mxt_data *data)

case MXT_SUSPEND_DEEP_SLEEP:
default:
+ disable_irq(data->irq);
+
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+
+ mxt_reset_slots(data);
break;
}
+
+ data->suspended = true;
}

static int mxt_input_open(struct input_dev *dev)
--
2.17.1

2019-11-22 08:28:45

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 38/48] Input: Atmel: improve error handling in mxt_start()

From: Deepak Das <[email protected]>

mxt_start() does not return error in any of
the failure cases which will allow input_dev->open()
to return success even in case of any failure.

This commit modifies mxt_start() to return error
in failure cases.

Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 31 ++++++++++++------------
1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a5af1f91d704..1ebdca1ed815 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3974,12 +3974,13 @@ static int mxt_start(struct mxt_data *data)

switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
- mxt_soft_reset(data);
-
+ ret = mxt_soft_reset(data);
+ if (ret)
+ break;
/* Touch enable */
/* 0x83 = SCANEN | RPTEN | ENABLE */
- mxt_write_object(data,
- MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
+ ret = mxt_write_object(data,
+ MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
break;

case MXT_SUSPEND_REGULATOR:
@@ -3993,27 +3994,26 @@ static int mxt_start(struct mxt_data *data)
* Discard any touch messages still in message buffer
* from before chip went to sleep
*/
- mxt_process_messages_until_invalid(data);
+ ret = mxt_process_messages_until_invalid(data);
+ if (ret)
+ break;

ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
if (ret)
- return ret;
+ break;

/* Recalibrate since chip has been in deep sleep */
ret = mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
if (ret)
- return ret;
+ break;

ret = mxt_acquire_irq(data);
- if (ret)
- return ret;
-
- break;
}

- data->suspended = false;
+ if (!ret)
+ data->suspended = false;

- return 0;
+ return ret;
}

static int mxt_stop(struct mxt_data *data)
@@ -4333,6 +4333,7 @@ static int __maybe_unused mxt_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct mxt_data *data = i2c_get_clientdata(client);
struct input_dev *input_dev = data->input_dev;
+ int ret = 0;

if (!input_dev)
return 0;
@@ -4340,11 +4341,11 @@ static int __maybe_unused mxt_resume(struct device *dev)
mutex_lock(&input_dev->mutex);

if (input_dev->users)
- mxt_start(data);
+ ret = mxt_start(data);

mutex_unlock(&input_dev->mutex);

- return 0;
+ return ret;
}

static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
--
2.17.1

2019-11-22 08:28:54

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 39/48] Input: Atmel: improve error handling in mxt_initialize()

From: Deepak Das <[email protected]>

Currently mxt_initialize() tries to probe bootloader mode
even if valid bootloader address is not specified.

This commit modifies mxt_initialize() to return error
if Device is not in appmode and bootloader address is
not specified.

This commit also returns error code from mxt_send_bootloader_cmd()
in mxt_initialize().

Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 58 +++++++++++++++++-------
1 file changed, 41 insertions(+), 17 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 1ebdca1ed815..110c966e7f3a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -716,17 +716,13 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
return 0;
}

-static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
+static int mxt_probe_bootloader(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
int error;
u8 buf[3];
bool crc_failure, extended_id;

- error = mxt_lookup_bootloader_address(data, alt_address);
- if (error)
- return error;
-
/* Check bootloader status and version information */
error = mxt_bootloader_read(data, buf, sizeof(buf));
if (error)
@@ -2923,6 +2919,32 @@ static void mxt_config_cb(const struct firmware *cfg, void *ctx)
release_firmware(cfg);
}

+static int mxt_bootloader_status(struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+
+ error = mxt_lookup_bootloader_address(data, false);
+ if (error) {
+ dev_info(&client->dev,
+ "Bootloader address is not specified\n");
+ return error;
+ }
+ /* Check bootloader state */
+ error = mxt_probe_bootloader(data);
+ if (error) {
+ dev_info(&client->dev, "Trying alternate bootloader address\n");
+ mxt_lookup_bootloader_address(data, true);
+ error = mxt_probe_bootloader(data);
+ if (error) {
+ dev_err(&client->dev,
+ "Chip is not in appmode or bootloader mode\n");
+ return error;
+ }
+ }
+ return 0;
+}
+
static int mxt_initialize(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -2934,16 +2956,13 @@ static int mxt_initialize(struct mxt_data *data)
if (!error)
break;

- /* Check bootloader state */
- error = mxt_probe_bootloader(data, false);
- if (error) {
- dev_info(&client->dev, "Trying alternate bootloader address\n");
- error = mxt_probe_bootloader(data, true);
- if (error) {
- /* Chip is not in appmode or bootloader mode */
- return error;
- }
- }
+ dev_info(&client->dev,
+ "info block read failed (%d), so try bootloader method\n",
+ error);
+
+ error = mxt_bootloader_status(data);
+ if (error)
+ return error;

/* OK, we are in bootloader, see if we can recover */
if (++recovery_attempts > 1) {
@@ -2957,7 +2976,9 @@ static int mxt_initialize(struct mxt_data *data)
}

/* Attempt to exit bootloader into app mode */
- mxt_send_bootloader_cmd(data, false);
+ error = mxt_send_bootloader_cmd(data, false);
+ if (error)
+ return error;
msleep(MXT_FW_RESET_TIME);
}

@@ -3649,8 +3670,11 @@ static int mxt_enter_bootloader(struct mxt_data *data)

msleep(MXT_RESET_TIME);

+ ret = mxt_lookup_bootloader_address(data, false);
+ if (ret)
+ return ret;
/* Do not need to scan since we know family ID */
- ret = mxt_probe_bootloader(data, 0);
+ ret = mxt_probe_bootloader(data);
if (ret)
return ret;

--
2.17.1

2019-11-22 08:28:59

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 41/48] Input: Atmel: Improve error handling in mxt_initialize_input_device()

From: Deepak Das <[email protected]>

Currently Driver probe continues with a warning message when it fails to
get the proper multitouch object configurations like TouchScreen resolution.
But Driver probe should fail in case of above scneario because it will not behave
as expected without the proper touchscreen configurations.

This commit modifies mxt_initialize_input_device() to return error when it fails
to get the proper touch screen configurations.

Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: Dean Jenkins <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 92af95bd4eed..e3ed74e7c270 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2762,15 +2762,19 @@ static int mxt_initialize_input_device(struct mxt_data *data)
case MXT_TOUCH_MULTI_T9:
num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
error = mxt_read_t9_resolution(data);
- if (error)
- dev_warn(dev, "Failed to initialize T9 resolution\n");
+ if (error) {
+ dev_err(dev, "Failed to initialize T9 resolution\n");
+ return error;
+ }
break;

case MXT_TOUCH_MULTITOUCHSCREEN_T100:
num_mt_slots = data->num_touchids;
error = mxt_read_t100_config(data);
- if (error)
- dev_warn(dev, "Failed to read T100 config\n");
+ if (error) {
+ dev_err(dev, "Failed to read T100 config\n");
+ return error;
+ }
break;

default:
--
2.17.1

2019-11-22 08:29:02

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 37/48] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid()

From: Dean Jenkins <[email protected]>

mxt_process_messages_until_invalid() failed to propagate the error
code from mxt_read_and_process_messages() so return the error code.

Signed-off-by: Dean Jenkins <[email protected]>
Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 054aacc768b8..a5af1f91d704 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1564,6 +1564,8 @@ static int mxt_process_messages_until_invalid(struct mxt_data *data)
/* Read messages until we force an invalid */
do {
read = mxt_read_and_process_messages(data, count);
+ if (read < 0)
+ return read;
if (read < count)
return 0;
} while (--tries);
--
2.17.1

2019-11-22 08:29:29

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 46/48] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data

From: Naveen Chakka <[email protected]>

Atmel touch controller contains T38 object where a user can store its own
data of length 64 bytes. T38 data will not be part of checksum
calculation on executing T6 BACKUP command.

format used to update the T38 data is given below:

<offset> <length> <actual_data>

offset: offset address of the data to be written in the t38 object
(in decimal)

length: length of the data to be written into the t38 object(in decimal)

data: actual data bytes to be written into the t38 object
(values should be in hex)

Ex:
1. 0 2 10 20
updates first two bytes of the t38 data with values 10 and 20

2. 19 6 10 2f 30 4a 50 60
updates 6 bytes of t38 data from the index 19-24 with hex values

Signed-off-by: Naveen Chakka <[email protected]>
Signed-off-by: Sanjeev Chugh <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 102 +++++++++++++++++++++++
1 file changed, 102 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d22a00ec69c1..a867960dc59b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4027,6 +4027,106 @@ static ssize_t mxt_touch_device_status(struct device *dev, struct
return ret;
}

+static ssize_t mxt_t38_data_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_object *object;
+ size_t count = 0, size;
+ u8 i, *t38_buf;
+
+ if (!data->object_table)
+ return -ENXIO;
+
+ object = mxt_get_object(data, MXT_SPT_USERDATA_T38);
+ size = mxt_obj_size(object);
+
+ /* Pre-allocate buffer large enough to hold max size of t38 object.*/
+ t38_buf = kmalloc(size, GFP_KERNEL);
+ if (!t38_buf)
+ return -ENOMEM;
+
+ count = __mxt_read_reg(data->client, object->start_address,
+ size, t38_buf);
+ if (count)
+ goto end;
+
+ for (i = 0; i < size; i++)
+ count += scnprintf(buf + count, PAGE_SIZE - count,
+ "[%2u]: %02x\n", i, t38_buf[i]);
+ count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+end:
+ kfree(t38_buf);
+ return count;
+}
+
+static ssize_t mxt_t38_data_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_object *object;
+ ssize_t ret = 0, pos, offset;
+ unsigned int i, len, index;
+ u8 *t38_buf;
+
+ if (!data->object_table)
+ return -ENXIO;
+
+ object = mxt_get_object(data, MXT_SPT_USERDATA_T38);
+
+ /* Pre-allocate buffer large enough to hold max size of t38 object.*/
+ t38_buf = kmalloc(mxt_obj_size(object), GFP_KERNEL);
+ if (!t38_buf)
+ return -ENOMEM;
+
+ ret = sscanf(buf, "%zd %d%zd", &offset, &len, &pos);
+ if (ret != 2) {
+ dev_err(dev, "Bad format: Invalid parameter to update t38\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ if (len == 0) {
+ dev_err(dev,
+ "Bad format: Data length should not be equal to 0\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ if (offset < 0 || ((offset + len) > 64)) {
+ dev_err(dev, "Invalid offset value to update t38\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ index = pos;
+ for (i = 0; i < len; i++) {
+ ret = sscanf(buf + index, "%hhx%zd", t38_buf + i, &pos);
+ if (ret != 1) {
+ dev_err(dev, "Bad format: Invalid Data\n");
+ ret = -EINVAL;
+ goto end;
+ }
+ index += pos;
+ }
+
+ ret = __mxt_write_reg(data->client, object->start_address + offset,
+ len, t38_buf);
+ if (ret)
+ goto end;
+
+ ret = mxt_t6_command(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE,
+ true);
+ if (ret)
+ dev_err(dev, "backup command failed\n");
+ else
+ ret = count;
+end:
+ kfree(t38_buf);
+ return ret;
+}
+
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
@@ -4039,6 +4139,7 @@ static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);
static DEVICE_ATTR(t25, 0600, mxt_t25_selftest_show, mxt_t25_selftest_store);
static DEVICE_ATTR(touch_dev_stat, 0444, mxt_touch_device_status, NULL);
+static DEVICE_ATTR(t38_data, 0600, mxt_t38_data_show, mxt_t38_data_store);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -4051,6 +4152,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_debug_notify.attr,
&dev_attr_t25.attr,
&dev_attr_touch_dev_stat.attr,
+ &dev_attr_t38_data.attr,
NULL
};

--
2.17.1

2019-11-22 08:29:39

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 48/48] Input: atmel_mxt_ts - Fix compilation warning

fix "make W=1" compilation warnings from Atmel driver
as per the compilation logs.

Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 243820b102b8..3e2697810cf0 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2049,7 +2049,7 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)

byte_offset = reg + i - cfg->start_ofs;

- if (byte_offset >= 0 && byte_offset < cfg->mem_size) {
+ if (byte_offset < cfg->mem_size) {
*(cfg->mem + byte_offset) = val;
} else {
dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
--
2.17.1

2019-11-22 08:29:39

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 44/48] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin

From: Balasubramani Vivekanandan <[email protected]>

In case of remote display, touch controller will be also remote.
In such cases, the reset pin of the touch controller will be
controlled through bridging ICs like Deserilizer and Serializer.
Therefore accessing the gpio pins require transactions with the
external IC. Using the function gpiod_set_value will print a
warning like below

WARNING: CPU: 0 PID: 576 at drivers/gpio/gpiolib.c:1441 gpiod_set_value+0x34/0x60()
CPU: 0 PID: 576 Comm: modprobe Not tainted 3.14.79-08377-g84ea22f-dirty #4
Backtrace:
[<80011c58>] (dump_backtrace) from [<80011e60>] (show_stack+0x18/0x1c)
[<80011e48>] (show_stack) from [<8052d7ac>] (dump_stack+0x7c/0x9c)
[<8052d730>] (dump_stack) from [<800241bc>] (warn_slowpath_common+0x74/0x9c)
[<80024148>] (warn_slowpath_common) from [<80024288>] (warn_slowpath_null+0x24/0x2c)
[<80024264>] (warn_slowpath_null) from [<8029e070>] (gpiod_set_value+0x34/0x60)
[<8029e03c>] (gpiod_set_value) from [<7f492e98>] (mxt_probe+0x1e0/0x718 [atmel_mxt_ts])
[<7f492cb8>] (mxt_probe [atmel_mxt_ts]) from [<803c4d34>] (i2c_device_probe+0xcc/0xec)
[<803c4c68>] (i2c_device_probe) from [<803252a0>] (driver_probe_device+0xc0/0x200)

Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Signed-off-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Sanjeev Chugh <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 0e4a870fafa5..78903806c0b4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2490,7 +2490,7 @@ static void mxt_regulator_enable(struct mxt_data *data)
if (!data->reg_vdd || !data->reg_avdd)
return;

- gpiod_set_value(data->reset_gpio, 0);
+ gpiod_set_value_cansleep(data->reset_gpio, 0);

error = regulator_enable(data->reg_vdd);
if (error)
@@ -2508,7 +2508,7 @@ static void mxt_regulator_enable(struct mxt_data *data)
* voltage
*/
msleep(MXT_REGULATOR_DELAY);
- gpiod_set_value(data->reset_gpio, 1);
+ gpiod_set_value_cansleep(data->reset_gpio, 1);
msleep(MXT_CHG_DELAY);

retry_wait:
@@ -4313,7 +4313,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
disable_irq(data->irq);
} else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
- gpiod_set_value(data->reset_gpio, 1);
+ gpiod_set_value_cansleep(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
} else {
dev_dbg(&client->dev,
--
2.17.1

2019-11-22 08:29:39

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 16/48] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs

From: Nick Dyer <[email protected]>

There may be multiple maXTouch chips on a single device which will require
different configuration files. Add a platform data value for the
configuration filename.

Add sysfs entry to write configuration file if the platform data is not
set.

Split out the object initialisation code from mxt_initialize() into
mxt_configure_objects() to allow this.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 71a2a4d1954460b949a16b607f72bafab294ca79)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[gdavis: Squash fix from Vladimir Zapolskiy:
- Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()]
Signed-off-by: Vladimir Zapolskiy <[email protected]>
---
Notes:
- Squash fix from Vladimir Zapolskiy:
+ Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()

Fail in mxt_update_cfg() is critical, because the driver state machine
is broken and it can not be safely used afterwards.

[jiada: Squash fix from ndyer/linux/for-upstream commit c909ada856861f305653b127db3ea0fa60264331
- Input: atmel_mxt_ts - check data->input_dev is not null in mxt_input_sync()]
Signed-off-by: Jiada Wang <[email protected]>
---
.../bindings/input/atmel,maxtouch.txt | 3 +
drivers/input/touchscreen/atmel_mxt_ts.c | 109 +++++++++++++++---
2 files changed, 97 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index e28139ce3cae..713ce870805c 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -37,6 +37,9 @@ Optional properties for main touchpad device:
MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.

+- atmel,cfg_name: Provide name of configuration file in OBP_RAW format. This
+ will be downloaded from the firmware loader on probe to the device.
+
Example:

touch@4b {
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a0e367bc6e83..362b7630ec6e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -34,7 +34,6 @@
#include <dt-bindings/input/atmel_mxt_ts.h>

/* Configuration file */
-#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"

/* Registers */
@@ -335,6 +334,8 @@ struct mxt_data {
struct regulator *reg_vdd;
struct regulator *reg_avdd;
char *fw_name;
+ char *cfg_name;
+ const char *pcfg_name;

/* Cached parameters from object table */
u16 T5_address;
@@ -377,6 +378,9 @@ struct mxt_data {

/* Indicates whether device is in suspend */
bool suspended;
+
+ /* Indicates whether device is updating configuration */
+ bool updating_config;
};

struct mxt_vb2_buffer {
@@ -833,9 +837,11 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)

static void mxt_input_sync(struct mxt_data *data)
{
- input_mt_report_pointer_emulation(data->input_dev,
- data->t19_num_keys);
- input_sync(data->input_dev);
+ if (data->input_dev) {
+ input_mt_report_pointer_emulation(data->input_dev,
+ data->t19_num_keys);
+ input_sync(data->input_dev);
+ }
}

static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
@@ -2578,13 +2584,21 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
return error;

- error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
- &client->dev, GFP_KERNEL, data,
- mxt_config_cb);
- if (error) {
- dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
- error);
- goto err_free_sysfs;
+ if (data->cfg_name) {
+ error = request_firmware_nowait(THIS_MODULE, true,
+ data->cfg_name,
+ &client->dev,
+ GFP_KERNEL, data,
+ mxt_config_cb);
+ if (error) {
+ dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+ error);
+ goto err_free_sysfs;
+ }
+ } else {
+ error = mxt_configure_objects(data, NULL);
+ if (error)
+ goto err_free_sysfs;
}

return 0;
@@ -3081,19 +3095,21 @@ static int mxt_configure_objects(struct mxt_data *data,
error = mxt_init_t7_power_cfg(data);
if (error) {
dev_err(dev, "Failed to initialize power cfg\n");
- return error;
+ goto err_free_object_table;
}

if (cfg) {
error = mxt_update_cfg(data, cfg);
- if (error)
+ if (error) {
dev_warn(dev, "Error %d updating config\n", error);
+ goto err_free_object_table;
+ }
}

if (data->multitouch) {
error = mxt_initialize_input_device(data);
if (error)
- return error;
+ goto err_free_object_table;
} else {
dev_warn(dev, "No touch object detected\n");
}
@@ -3101,6 +3117,10 @@ static int mxt_configure_objects(struct mxt_data *data,
mxt_debug_init(data);

return 0;
+
+err_free_object_table:
+ mxt_free_object_table(data);
+ return error;
}

/* Firmware Version is returned as Major.Minor.Build */
@@ -3392,6 +3412,55 @@ static ssize_t mxt_update_fw_store(struct device *dev,
return count;
}

+static ssize_t mxt_update_cfg_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ const struct firmware *cfg;
+ int ret;
+
+ ret = mxt_update_file_name(dev, &data->cfg_name, buf, count);
+ if (ret)
+ return ret;
+
+ ret = request_firmware(&cfg, data->cfg_name, dev);
+ if (ret < 0) {
+ dev_err(dev, "Failure to request config file %s\n",
+ data->cfg_name);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ data->updating_config = true;
+
+ mxt_free_input_device(data);
+
+ if (data->suspended) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ } else if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP) {
+ mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ mxt_acquire_irq(data);
+ }
+
+ data->suspended = false;
+ }
+
+ ret = mxt_configure_objects(data, cfg);
+ if (ret)
+ goto release;
+
+ ret = count;
+
+release:
+ release_firmware(cfg);
+out:
+ data->updating_config = false;
+ return ret;
+}
+
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);

static struct attribute *mxt_fw_attrs[] = {
@@ -3406,11 +3475,13 @@ static const struct attribute_group mxt_fw_attr_group = {
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_object.attr,
+ &dev_attr_update_cfg.attr,
NULL
};

@@ -3511,7 +3582,7 @@ static int mxt_stop(struct mxt_data *data)
{
int ret;

- if (data->suspended || data->in_bootloader)
+ if (data->suspended || data->in_bootloader || data->updating_config)
return 0;

switch (data->suspend_mode) {
@@ -3580,6 +3651,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
int n_keys;
int error;

+ device_property_read_string(dev, "atmel,cfg_name", &data->pcfg_name);
+
if (device_property_present(dev, keymap_property)) {
n_keys = device_property_count_u32(dev, keymap_property);
if (n_keys <= 0) {
@@ -3704,6 +3777,12 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (error)
return error;

+ if (data->pcfg_name)
+ mxt_update_file_name(&data->client->dev,
+ &data->cfg_name,
+ data->pcfg_name,
+ strlen(data->pcfg_name));
+
data->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio)) {
--
2.17.1

2019-11-22 08:29:42

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 21/48] Input: atmel_mxt_ts - combine bootloader version query with probe

From: Nick Dyer <[email protected]>

This removes some complexity from the bootloader state machine, and means
that we always output some debug about the version as soon as we start
talking to the bootloader.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit a2d141f170c80fea6663af98aab0be32abc0ddb0)
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 45 +++++++-----------------
1 file changed, 13 insertions(+), 32 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 04627db23ad2..d38ae9525e35 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -558,47 +558,31 @@ static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
{
struct device *dev = &data->client->dev;
int error;
- u8 val;
- bool crc_failure;
+ u8 buf[3];
+ bool crc_failure, extended_id;

error = mxt_lookup_bootloader_address(data, alt_address);
if (error)
return error;

- error = mxt_bootloader_read(data, &val, 1);
+ /* Check bootloader status and version information */
+ error = mxt_bootloader_read(data, buf, sizeof(buf));
if (error)
return error;

- /* Check app crc fail mode */
- crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+ crc_failure = (buf[0] & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+ extended_id = buf[0] & MXT_BOOT_EXTENDED_ID;

- dev_err(dev, "Detected bootloader, status:%02X%s\n",
- val, crc_failure ? ", APP_CRC_FAIL" : "");
+ dev_info(dev, "Found bootloader addr:%02x ID:%u%s%u%s\n",
+ data->bootloader_addr,
+ extended_id ? (buf[1] & MXT_BOOT_ID_MASK) : buf[0],
+ extended_id ? " version:" : "",
+ extended_id ? buf[2] : 0,
+ crc_failure ? ", APP_CRC_FAIL" : "");

return 0;
}

-static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
-{
- struct device *dev = &data->client->dev;
- u8 buf[3];
-
- if (val & MXT_BOOT_EXTENDED_ID) {
- if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
- dev_err(dev, "%s: i2c failure\n", __func__);
- return val;
- }
-
- dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
-
- return buf[0];
- } else {
- dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
-
- return val;
- }
-}
-
static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
bool wait)
{
@@ -632,9 +616,6 @@ static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
if (ret)
return ret;

- if (state == MXT_WAITING_BOOTLOAD_CMD)
- val = mxt_get_bootloader_version(data, val);
-
switch (state) {
case MXT_WAITING_BOOTLOAD_CMD:
case MXT_WAITING_FRAME_DATA:
@@ -3283,7 +3264,7 @@ static int mxt_enter_bootloader(struct mxt_data *data)
msleep(MXT_RESET_TIME);

/* Do not need to scan since we know family ID */
- ret = mxt_lookup_bootloader_address(data, 0);
+ ret = mxt_probe_bootloader(data, 0);
if (ret)
return ret;

--
2.17.1

2019-11-22 08:29:53

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven

From: Nick Dyer <[email protected]>

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 67a3eea0cfc724c3c2a7410ac064f74227c7c6ef)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <[email protected]>
[jiada: Replace two use msecs_to_jiffies() instead of HZ,
remove check of &data->flash->work]
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 118 ++++++++++++-----------
1 file changed, 60 insertions(+), 58 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 520dc9670b38..842d407efc86 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -27,6 +27,7 @@
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
#include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
@@ -218,6 +219,7 @@ enum t100_type {
#define MXT_REGULATOR_DELAY 150 /* msec */
#define MXT_CHG_DELAY 100 /* msec */
#define MXT_POWERON_DELAY 150 /* msec */
+#define MXT_BOOTLOADER_WAIT 36E5 /* 1 minute */

/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -299,6 +301,7 @@ struct mxt_fw_frame {

/* Firmware update context */
struct mxt_flash {
+ struct mxt_data *data;
const struct firmware *fw;
struct mxt_fw_frame *frame;
loff_t pos;
@@ -306,7 +309,8 @@ struct mxt_flash {
unsigned int count;
unsigned int retry;
u8 previous;
- bool complete;
+ struct completion flash_completion;
+ struct delayed_work work;
};

/* Each client has this additional data */
@@ -355,6 +359,7 @@ struct mxt_data {
char *cfg_name;
const char *pcfg_name;
const char *input_name;
+ struct mxt_flash *flash;

/* Cached parameters from object table */
u16 T5_address;
@@ -599,28 +604,17 @@ static int mxt_write_firmware_frame(struct mxt_data *data, struct mxt_flash *f)
f->frame_size);
}

-static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
+static int mxt_check_bootloader(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
+ struct mxt_flash *f = data->flash;
u8 state;
int ret;

- /*
- * In application update mode, the interrupt
- * line signals state transitions. We must wait for the
- * CHG assertion before reading the status byte.
- * Once the status byte has been read, the line is deasserted.
- */
- ret = mxt_wait_for_completion(data, &data->chg_completion,
- MXT_FW_CHG_TIMEOUT);
- if (ret) {
- /*
- * TODO: handle -ERESTARTSYS better by terminating
- * fw update process before returning to userspace
- * by writing length 0x000 to device (iff we are in
- * WAITING_FRAME_DATA state).
- */
- dev_warn(dev, "Update wait error %d\n", ret);
+ /* Handle interrupt after download/flash process */
+ if (f->pos >= f->fw->size) {
+ complete(&f->flash_completion);
+ return 0;
}

ret = mxt_bootloader_read(data, &state, 1);
@@ -666,14 +660,12 @@ static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
f->pos += f->frame_size;
f->count++;

- if (f->pos >= f->fw->size) {
- f->complete = true;
+ if (f->pos >= f->fw->size)
dev_info(dev, "Sent %u frames, %zu bytes\n",
f->count, f->fw->size);
- } else if (f->count % 50 == 0) {
+ else if (f->count % 50 == 0)
dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
f->count, f->pos, f->fw->size);
- }

break;

@@ -695,6 +687,9 @@ static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)

f->previous = state;

+ /* Poll after 0.1s if no interrupt received */
+ schedule_delayed_work(&f->work, msecs_to_jiffies(100));
+
return 0;

unexpected:
@@ -1403,7 +1398,11 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)

if (data->in_bootloader) {
complete(&data->chg_completion);
- return IRQ_HANDLED;
+
+ if (data->flash)
+ cancel_delayed_work_sync(&data->flash->work);
+
+ return IRQ_RETVAL(mxt_check_bootloader(data));
}

if (!data->object_table)
@@ -3304,16 +3303,13 @@ static int mxt_enter_bootloader(struct mxt_data *data)
if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
mxt_regulator_enable(data);

- if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP)
- enable_irq(data->irq);
-
data->suspended = false;
}

if (!data->in_bootloader) {
- /* Change to the bootloader mode */
- data->in_bootloader = true;
+ disable_irq(data->irq);

+ /* Change to the bootloader mode */
ret = mxt_t6_command(data, MXT_COMMAND_RESET,
MXT_BOOT_VALUE, false);
if (ret)
@@ -3326,67 +3322,73 @@ static int mxt_enter_bootloader(struct mxt_data *data)
if (ret)
return ret;

+ data->in_bootloader = true;
mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
- } else {
- enable_irq(data->irq);
}

- reinit_completion(&data->chg_completion);
+ dev_dbg(&data->client->dev, "Entered bootloader\n");

return 0;
}

+static void mxt_fw_work(struct work_struct *work)
+{
+ struct mxt_flash *f =
+ container_of(work, struct mxt_flash, work.work);
+
+ mxt_check_bootloader(f->data);
+}
+
static int mxt_load_fw(struct device *dev)
{
struct mxt_data *data = dev_get_drvdata(dev);
- struct mxt_flash f = { 0, };
int ret;

- ret = request_firmware(&f.fw, data->fw_name, dev);
+ data->flash = devm_kzalloc(dev, sizeof(struct mxt_flash), GFP_KERNEL);
+ if (!data->flash)
+ return -ENOMEM;
+
+ data->flash->data = data;
+
+ ret = request_firmware(&data->flash->fw, data->fw_name, dev);
if (ret) {
dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
- return ret;
+ goto free;
}

/* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, f.fw);
+ ret = mxt_check_firmware_format(dev, data->flash->fw);
if (ret)
goto release_firmware;

- ret = mxt_enter_bootloader(data);
- if (ret)
- goto release_firmware;
+ init_completion(&data->flash->flash_completion);
+ INIT_DELAYED_WORK(&data->flash->work, mxt_fw_work);
+ reinit_completion(&data->flash->flash_completion);

- while (true) {
- ret = mxt_check_bootloader(data, &f);
+ if (!data->in_bootloader) {
+ ret = mxt_enter_bootloader(data);
if (ret)
- return ret;
-
- if (f.complete)
- break;
+ goto release_firmware;
}

- /* Wait for flash. */
- ret = mxt_wait_for_completion(data, &data->chg_completion,
- MXT_FW_RESET_TIME);
- if (ret)
- goto disable_irq;
+ enable_irq(data->irq);

+ /* Poll after 0.1s if no interrupt received */
+ schedule_delayed_work(&data->flash->work, msecs_to_jiffies(100));

- /*
- * Wait for device to reset. Some bootloader versions do not assert
- * the CHG line after bootloading has finished, so ignore potential
- * errors.
- */
- mxt_wait_for_completion(data, &data->chg_completion, MXT_FW_RESET_TIME);
+ /* Wait for flash. */
+ ret = mxt_wait_for_completion(data, &data->flash->flash_completion,
+ MXT_BOOTLOADER_WAIT);

- data->in_bootloader = false;
-disable_irq:
disable_irq(data->irq);
+ cancel_delayed_work_sync(&data->flash->work);
+ data->in_bootloader = false;
release_firmware:
- release_firmware(f.fw);
+ release_firmware(data->flash->fw);
+free:
+ devm_kfree(dev, data->flash);
return ret;
}

--
2.17.1

2019-11-22 08:29:56

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 27/48] Input: atmel_mxt_ts - orientation is not present in hover

From: Nick Dyer <[email protected]>

When in hover, the orientation information is not sent

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 0c885d5bd276bd9240c43aa046fc407cbe2ae864)
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index fc2f804e5293..de77079e3324 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1029,10 +1029,6 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
distance = MXT_DISTANCE_HOVERING;
hover = true;
active = true;
-
- if (data->t100_aux_vect)
- orientation = message[data->t100_aux_vect];
-
break;

case MXT_T100_TYPE_FINGER:
--
2.17.1

2019-11-22 08:30:11

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 31/48] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions

From: Kautuk Consul <[email protected]>

Revamping the code to call mxt_free_object_table and mxt_free_input_device
functions only in the following scenarios and code paths:
1) The error path of the mxt_probe() entry point
2) The mxt_remove de-init path entry point
3) All paths which definitely expect to populate the object table
like:
- the mxt_update_fw_store path which first calls
mxt_load_fw and then resorts to calling mxt_initialize itself.
- the mxt_read_info_block function which attempts to fill in the
object table itself as the main non-error part of the logic.
4) All paths in the code expected to definitely allocate and register
the input device such as:
- the mxt_update_fw_store path which first calls
mxt_load_fw and then resorts to calling mxt_initialize itself.
- the mxt_update_cfg_store function which will call
mxt_configure_objects.

Signed-off-by: Kautuk Consul <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 54e2d5f81af9..acbba44d604c 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3339,21 +3339,21 @@ static int mxt_configure_objects(struct mxt_data *data,
error = mxt_init_t7_power_cfg(data);
if (error) {
dev_err(dev, "Failed to initialize power cfg\n");
- goto err_free_object_table;
+ return error;
}

if (cfg) {
error = mxt_update_cfg(data, cfg);
if (error) {
dev_warn(dev, "Error %d updating config\n", error);
- goto err_free_object_table;
+ return error;
}
}

if (data->multitouch) {
error = mxt_initialize_input_device(data);
if (error)
- goto err_free_object_table;
+ return error;
} else {
dev_warn(dev, "No touch object detected\n");
}
@@ -3361,10 +3361,6 @@ static int mxt_configure_objects(struct mxt_data *data,
mxt_debug_init(data);

return 0;
-
-err_free_object_table:
- mxt_free_object_table(data);
- return error;
}

/* Configuration crc check sum is returned as hex xxxxxx */
@@ -4100,16 +4096,21 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)

error = mxt_initialize(data);
if (error)
- return error;
+ goto err_free_object;

error = sysfs_create_group(&client->dev.kobj, &mxt_fw_attr_group);
if (error) {
dev_err(&client->dev, "Failure %d creating fw sysfs group\n",
error);
- return error;
+ goto err_free_object;
}

return 0;
+
+err_free_object:
+ mxt_free_input_device(data);
+ mxt_free_object_table(data);
+ return error;
}

static int mxt_remove(struct i2c_client *client)
--
2.17.1

2019-11-22 08:30:24

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 26/48] Input: atmel_mxt_ts - implement I2C retries

From: Nick Dyer <[email protected]>

Some maXTouch chips (eg mXT1386) will not respond on the first I2C request
when they are in a sleep state. It must be retried after a delay for the
chip to wake up.

Signed-off-by: Nick Dyer <[email protected]>
Acked-by: Yufeng Shen <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 63fd7a2cd03c3a572a5db39c52f4856819e1835d)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 45 ++++++++++++++++--------
1 file changed, 30 insertions(+), 15 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index f5d67e43a786..fc2f804e5293 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -216,6 +216,7 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_WAKEUP_TIME 25 /* msec */
#define MXT_REGULATOR_DELAY 150 /* msec */
#define MXT_CHG_DELAY 100 /* msec */
#define MXT_POWERON_DELAY 150 /* msec */
@@ -723,6 +724,7 @@ static int __mxt_read_chunk(struct i2c_client *client,
struct i2c_msg xfer[2];
u8 buf[2];
int ret;
+ bool retry = false;

buf[0] = reg & 0xff;
buf[1] = (reg >> 8) & 0xff;
@@ -739,17 +741,22 @@ static int __mxt_read_chunk(struct i2c_client *client,
xfer[1].len = len;
xfer[1].buf = val;

- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret == 2) {
- ret = 0;
- } else {
- if (ret >= 0)
- ret = -EIO;
- dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
- __func__, ret);
+retry_read:
+ ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer));
+ if (ret != ARRAY_SIZE(xfer)) {
+ if (!retry) {
+ dev_dbg(&client->dev, "%s: i2c retry\n", __func__);
+ msleep(MXT_WAKEUP_TIME);
+ retry = true;
+ goto retry_read;
+ } else {
+ dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+ __func__, ret);
+ return -EIO;
+ }
}

- return ret;
+ return 0;
}

static int __mxt_read_reg(struct i2c_client *client,
@@ -780,6 +787,7 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
u8 *buf;
size_t count;
int ret;
+ bool retry = false;

count = len + 2;
buf = kmalloc(count, GFP_KERNEL);
@@ -790,14 +798,21 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
buf[1] = (reg >> 8) & 0xff;
memcpy(&buf[2], val, len);

+retry_write:
ret = i2c_master_send(client, buf, count);
- if (ret == count) {
- ret = 0;
- } else {
- if (ret >= 0)
+ if (ret != count) {
+ if (!retry) {
+ dev_dbg(&client->dev, "%s: i2c retry\n", __func__);
+ msleep(MXT_WAKEUP_TIME);
+ retry = true;
+ goto retry_write;
+ } else {
+ dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+ __func__, ret);
ret = -EIO;
- dev_err(&client->dev, "%s: i2c send failed (%d)\n",
- __func__, ret);
+ }
+ } else {
+ ret = 0;
}

kfree(buf);
--
2.17.1

2019-11-22 08:30:30

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 35/48] Input: atmel_mxt_ts: Add support for run self-test routine.

From: Nikhil Ravindran <[email protected]>

The self test object T25 runs self test routines in device to find faults
Sysfs entry add to start self test routine and read back the test results
for atmel touchcontrollers.The feature will be used for A-IVI and CAF projects.

Signed-off-by: Nikhil Ravindran <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 835cc7a29c2f..74866015572f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -336,6 +336,9 @@ struct mxt_data {
u8 t100_aux_ampl;
u8 t100_aux_area;
u8 t100_aux_vect;
+ u16 T25_address;
+ u8 T25_reportid;
+ u8 t25_msg[6];
bool debug_enabled;
bool debug_v2_enabled;
u8 *debug_msg_data;
@@ -413,6 +416,8 @@ struct mxt_data {

/* Indicates whether device is updating configuration */
bool updating_config;
+
+ bool t25_status;
};

struct mxt_vb2_buffer {
@@ -1359,6 +1364,24 @@ static void mxt_proc_t93_messages(struct mxt_data *data, u8 *msg)
dev_info(dev, "T93 report double tap %d\n", status);
}

+static void mxt_proc_t25_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+
+ /* Output debug if status has changed */
+ dev_dbg(dev, "T25 Status 0x%x Info: %x %x %x %x %x\n",
+ msg[1],
+ msg[2],
+ msg[3],
+ msg[4],
+ msg[5],
+ msg[6]);
+
+ /* Save current status */
+ memcpy(&data->t25_msg[0], &msg[1], sizeof(data->t25_msg));
+ data->t25_status = false;
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
@@ -1389,6 +1412,8 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id == data->T19_reportid) {
mxt_input_button(data, message);
data->update_input = true;
+ } else if (report_id == data->T25_reportid) {
+ mxt_proc_t25_messages(data, message);
} else if (report_id >= data->T15_reportid_min
&& report_id <= data->T15_reportid_max) {
mxt_proc_t15_messages(data, message);
@@ -1613,6 +1638,84 @@ static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
return 0;
}

+static int mxt_t25_command(struct mxt_data *data, u8 cmd, bool wait)
+{
+ u16 reg;
+ int timeout_counter = 0;
+ int ret;
+ u8 val[2];
+
+ reg = data->T25_address;
+ val[0] = 0x3;
+ val[1] = cmd;
+
+ data->t25_status = true;
+ ret = __mxt_write_reg(data->client, reg, sizeof(val), val);
+ if (ret) {
+ data->t25_status = false;
+ return ret;
+ }
+
+ if (!wait)
+ return 0;
+
+ do {
+ msleep(MXT_WAKEUP_TIME);
+ ret = __mxt_read_reg(data->client, reg + 1, 1, &val[1]);
+ if (ret)
+ return ret;
+ } while ((val[1] != 0) && (timeout_counter++ <= 100));
+
+ if (timeout_counter > 100) {
+ dev_err(&data->client->dev, "Command failed!\n");
+ data->t25_status = false;
+ return -EIO;
+ }
+ return 0;
+}
+
+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_t25_selftest_show(struct device *dev, struct
+ device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ ssize_t offset = 0;
+
+ if (data->t25_status)
+ return -EAGAIN;
+
+ if (data->t25_msg[0] == 0xFE)
+ offset += scnprintf(buf, PAGE_SIZE, "PASS\n");
+ else
+ offset += scnprintf(buf, PAGE_SIZE, "FAILED\n");
+
+ offset += scnprintf(buf + offset, PAGE_SIZE, "%x %x %x %x %x %x\n",
+ data->t25_msg[0],
+ data->t25_msg[1],
+ data->t25_msg[2],
+ data->t25_msg[3],
+ data->t25_msg[4],
+ data->t25_msg[5]);
+ return offset;
+}
+
+static ssize_t mxt_t25_selftest_store(struct device *dev, struct
+ device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ u32 cmd;
+
+ if (sscanf(buf, "%x", &cmd) == 1) {
+ if (mxt_t25_command(data, (u8)cmd, 1) == 0)
+ return count;
+
+ dev_dbg(dev, "mxt_t25_cmd_store write cmd %x error\n", cmd);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int mxt_acquire_irq(struct mxt_data *data)
{
int error;
@@ -2091,6 +2194,8 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T15_reportid_max = 0;
data->T18_address = 0;
data->T19_reportid = 0;
+ data->T25_address = 0;
+ data->T25_reportid = 0;
data->T42_reportid_min = 0;
data->T42_reportid_max = 0;
data->T44_address = 0;
@@ -2178,6 +2283,10 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_SPT_COMMSCONFIG_T18:
data->T18_address = object->start_address;
break;
+ case MXT_SPT_SELFTEST_T25:
+ data->T25_address = object->start_address;
+ data->T25_reportid = min_id;
+ break;
case MXT_PROCI_TOUCHSUPPRESSION_T42:
data->T42_reportid_min = min_id;
data->T42_reportid_max = max_id;
@@ -3764,6 +3873,7 @@ static DEVICE_ATTR(debug_enable, S_IWUSR | S_IRUSR, mxt_debug_enable_show,
static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
mxt_debug_v2_enable_store);
static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);
+static DEVICE_ATTR(t25, 0600, mxt_t25_selftest_show, mxt_t25_selftest_store);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3774,6 +3884,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_debug_enable.attr,
&dev_attr_debug_v2_enable.attr,
&dev_attr_debug_notify.attr,
+ &dev_attr_t25.attr,
NULL
};

--
2.17.1

2019-11-22 08:30:31

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 32/48] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc

From: Kautuk Consul <[email protected]>

We now prefer to rely on the calculated CRC and not on the CRC stored in
the file.

The new logic is as follows:
1) stored CRC of file != calculated CRC of file, then refuse the possible
corrupted file
2) calculated CRC of file != CRC of configuration in controller, then
update configuration in controller
3) calculated CRC of file == CRC of configuration in controller, then
ignore configuration file

Signed-off-by: Kautuk Consul <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++-----------
1 file changed, 36 insertions(+), 29 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index acbba44d604c..3513413158c3 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1908,7 +1908,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
int ret;
int offset;
int i;
- u32 info_crc, config_crc, calculated_crc;
+ u32 info_crc, config_crc, calculated_crc = 0;
u16 crc_start = 0;

/* Make zero terminated copy of the OBP_RAW file */
@@ -1971,30 +1971,6 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
}
cfg.raw_pos += offset;

- /*
- * The Info Block CRC is calculated over mxt_info and the object
- * table. If it does not match then we are trying to load the
- * configuration from a different chip or firmware version, so
- * the configuration CRC is invalid anyway.
- */
- if (info_crc == data->info_crc) {
- if (config_crc == 0 || data->config_crc == 0) {
- dev_info(dev, "CRC zero, attempting to apply config\n");
- } else if (config_crc == data->config_crc) {
- dev_dbg(dev, "Config CRC 0x%06X: OK\n",
- data->config_crc);
- ret = 0;
- goto release_raw;
- } else {
- dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
- data->config_crc, config_crc);
- }
- } else {
- dev_warn(dev,
- "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
- data->info_crc, info_crc);
- }
-
/* Malloc memory to store configuration */
cfg.start_ofs = MXT_OBJECT_START +
data->info->object_num * sizeof(struct mxt_object) +
@@ -2018,14 +1994,45 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
else
dev_warn(dev, "Could not find CRC start\n");

- if (crc_start > cfg.start_ofs) {
+ if (crc_start > cfg.start_ofs)
calculated_crc = mxt_calculate_crc(cfg.mem,
crc_start - cfg.start_ofs,
cfg.mem_size);

- if (config_crc > 0 && config_crc != calculated_crc)
- dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
- calculated_crc, config_crc);
+ /* If the CRC stored in the file is not the same as what
+ * was calculated by mxt_calculate_crc, this means we
+ * have to refuse the config file and abort download.
+ */
+ if (config_crc != calculated_crc) {
+ dev_warn(dev,
+ "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
+ calculated_crc, config_crc);
+ ret = 0;
+ goto release_mem;
+ }
+
+ /*
+ * The Info Block CRC is calculated over mxt_info and the object
+ * table. If it does not match then we are trying to load the
+ * configuration from a different chip or firmware version, so
+ * the configuration CRC is invalid anyway.
+ */
+ if (info_crc == data->info_crc) {
+ if (config_crc == 0 || data->config_crc == 0) {
+ dev_info(dev, "CRC zero, attempting to apply config\n");
+ } else if (config_crc == data->config_crc) {
+ dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+ data->config_crc);
+ ret = 0;
+ goto release_mem;
+ } else {
+ dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+ data->config_crc, config_crc);
+ }
+ } else {
+ dev_warn(dev,
+ "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+ data->info_crc, info_crc);
}

ret = mxt_upload_cfg_mem(data, &cfg);
--
2.17.1

2019-11-22 08:30:32

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 34/48] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays.

From: keerthikumarp <[email protected]>

In case of attached display, the touchpanel reset is controlled
via imx gpio's from atmel driver and the delay between
touchpanel reset and the time at which the chip becomes capable to
communicate with the host processor, has be taken care.

However in case of detachable displays, the touchpanel reset is
controlled via a deserializer gpio which is triggered just before
the atmel driver is probed.The delay between touchpanel reset and
the time at which the chip becomes capable to communicate (as
specified in datasheet) was not being accounted for. This patch
introduces that delay.

Signed-off-by: keerthikumarp <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index f357d353447f..835cc7a29c2f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4112,6 +4112,10 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
+ } else {
+ dev_dbg(&client->dev,
+ "atmel reset pin not found in device tree");
+ msleep(MXT_RESET_TIME);
}

error = mxt_initialize(data);
--
2.17.1

2019-11-22 08:30:52

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 40/48] Input: Atmel: improve error handling in mxt_update_cfg()

From: Deepak Das <[email protected]>

mxt_update_cfg() failed to propagate the error
code from mxt_init_t7_power_cfg() so return the error code.

Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 110c966e7f3a..92af95bd4eed 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2186,7 +2186,9 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
dev_info(dev, "Config successfully updated\n");

/* T7 config may have changed */
- mxt_init_t7_power_cfg(data);
+ ret = mxt_init_t7_power_cfg(data);
+ if (ret)
+ dev_warn(dev, "Power Config failed to update\n");

release_mem:
kfree(cfg.mem);
--
2.17.1

2019-11-22 08:30:56

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 22/48] Input: atmel_mxt_ts - improve bootloader state machine handling

From: Nick Dyer <[email protected]>

The code is much clearer if we switch on the actual state the bootloader
is in, rather than the state we want it to be in, and allows the removal
of a goto retry tangle.

Signed-off-by: Nick Dyer <[email protected]>
(cherry picked from ndyer/linux/for-upstream commit 463e15ee95ee6e6274017ff645839dbe34d75c99)
[gdavis: Squash fix from George G. Davis:
- input: atmel_mxt_ts - Fix 'mxt_send_bootloader_cmd' was not
declared warning]
Signed-off-by: George G. Davis <[email protected]>
---
Notes:
- Squash fix from George G. Davis:
+ input: atmel_mxt_ts - Fix 'mxt_send_bootloader_cmd' was not declared warning

The following sparse warning was introduced by ndyer/linux/for-upstream
commit 463e15ee95ee ("Input: atmel_mxt_ts - improve bootloader state
machine handling"):

drivers/input/touchscreen/atmel_mxt_ts.c:888:5: warning: symbol 'mxt_send_bootloader_cmd' was not declared. Should it be static?

Fix the above sparse warning by restoring the 'mxt_send_bootloader_cmd'
static declaration which was errantly removed by
ndyer/linux/for-upstream commit 463e15ee95ee ("Input: atmel_mxt_ts -
improve bootloader state machine handling").

Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 183 ++++++++++++-----------
1 file changed, 98 insertions(+), 85 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d38ae9525e35..1c5230f7a9af 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -305,6 +305,8 @@ struct mxt_flash {
size_t frame_size;
unsigned int count;
unsigned int retry;
+ u8 previous;
+ bool complete;
};

/* Each client has this additional data */
@@ -583,64 +585,121 @@ static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
return 0;
}

-static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
- bool wait)
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock);
+
+static int mxt_write_firmware_frame(struct mxt_data *data, struct mxt_flash *f)
+{
+ f->frame = (struct mxt_fw_frame *)(f->fw->data + f->pos);
+
+ /* Take account of CRC bytes */
+ f->frame_size = __be16_to_cpu(f->frame->size) + 2U;
+
+ /* Write one frame to device */
+ return mxt_bootloader_write(data, f->fw->data + f->pos,
+ f->frame_size);
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
{
struct device *dev = &data->client->dev;
- u8 val;
+ u8 state;
int ret;

-recheck:
- if (wait) {
+ /*
+ * In application update mode, the interrupt
+ * line signals state transitions. We must wait for the
+ * CHG assertion before reading the status byte.
+ * Once the status byte has been read, the line is deasserted.
+ */
+ ret = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_FW_CHG_TIMEOUT);
+ if (ret) {
/*
- * In application update mode, the interrupt
- * line signals state transitions. We must wait for the
- * CHG assertion before reading the status byte.
- * Once the status byte has been read, the line is deasserted.
+ * TODO: handle -ERESTARTSYS better by terminating
+ * fw update process before returning to userspace
+ * by writing length 0x000 to device (iff we are in
+ * WAITING_FRAME_DATA state).
*/
- ret = mxt_wait_for_completion(data, &data->bl_completion,
- MXT_FW_CHG_TIMEOUT);
- if (ret) {
- /*
- * TODO: handle -ERESTARTSYS better by terminating
- * fw update process before returning to userspace
- * by writing length 0x000 to device (iff we are in
- * WAITING_FRAME_DATA state).
- */
- dev_err(dev, "Update wait error %d\n", ret);
- return ret;
- }
+ dev_warn(dev, "Update wait error %d\n", ret);
}

- ret = mxt_bootloader_read(data, &val, 1);
+ ret = mxt_bootloader_read(data, &state, 1);
if (ret)
return ret;

+ /* Remove don't care bits */
+ if (state & ~MXT_BOOT_STATUS_MASK)
+ state &= ~MXT_BOOT_STATUS_MASK;
+
switch (state) {
case MXT_WAITING_BOOTLOAD_CMD:
+ dev_info(dev, "Unlocking bootloader\n");
+ ret = mxt_send_bootloader_cmd(data, true);
+ if (ret)
+ return ret;
+
+ break;
+
case MXT_WAITING_FRAME_DATA:
- case MXT_APP_CRC_FAIL:
- val &= ~MXT_BOOT_STATUS_MASK;
+ if ((f->previous != MXT_WAITING_BOOTLOAD_CMD)
+ && (f->previous != MXT_FRAME_CRC_PASS)
+ && (f->previous != MXT_FRAME_CRC_FAIL))
+ goto unexpected;
+
+ ret = mxt_write_firmware_frame(data, f);
+ if (ret)
+ return ret;
+
+ break;
+
+ case MXT_FRAME_CRC_CHECK:
+ if (f->previous != MXT_WAITING_FRAME_DATA)
+ goto unexpected;
break;
+
case MXT_FRAME_CRC_PASS:
- if (val == MXT_FRAME_CRC_CHECK) {
- goto recheck;
- } else if (val == MXT_FRAME_CRC_FAIL) {
- dev_err(dev, "Bootloader CRC fail\n");
- return -EINVAL;
+ if (f->previous != MXT_FRAME_CRC_CHECK)
+ goto unexpected;
+
+ /* Next frame */
+ f->retry = 0;
+ f->pos += f->frame_size;
+ f->count++;
+
+ if (f->pos >= f->fw->size) {
+ f->complete = true;
+ dev_info(dev, "Sent %u frames, %zu bytes\n",
+ f->count, f->fw->size);
+ } else if (f->count % 50 == 0) {
+ dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
+ f->count, f->pos, f->fw->size);
}
+
+ break;
+
+ case MXT_FRAME_CRC_FAIL:
+ if (f->retry > 20) {
+ dev_err(dev, "Retry count exceeded\n");
+ return -EIO;
+ }
+
+ /* Back off by 20ms per retry */
+ dev_dbg(dev, "Bootloader frame CRC failure\n");
+ f->retry++;
+ msleep(f->retry * 20);
break;
+
default:
return -EINVAL;
}

- if (val != state) {
- dev_err(dev, "Invalid bootloader state %02X != %02X\n",
- val, state);
- return -EINVAL;
- }
+ f->previous = state;

return 0;
+
+unexpected:
+ dev_err(dev, "Unexpected state transition\n");
+ return -EINVAL;
}

static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
@@ -3301,57 +3360,13 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto release_firmware;

- ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
- if (ret) {
- /* Bootloader may still be unlocked from previous attempt */
- ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
- if (ret)
- goto disable_irq;
- } else {
- dev_info(dev, "Unlocking bootloader\n");
-
- /* Unlock bootloader */
- ret = mxt_send_bootloader_cmd(data, true);
+ while (true) {
+ ret = mxt_check_bootloader(data, &f);
if (ret)
- goto disable_irq;
- }
-
- while (f.pos < f.fw->size) {
- f.frame = (struct mxt_fw_frame *)(f.fw->data + f.pos);
-
- ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
- if (ret)
- goto disable_irq;
-
- /* Take account of CRC bytes */
- f.frame_size = __be16_to_cpu(f.frame->size) + 2U;
-
- /* Write one frame to device */
- ret = mxt_bootloader_write(data, f.fw->data + f.pos,
- f.frame_size);
- if (ret)
- goto disable_irq;
-
- ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
- if (ret) {
- f.retry++;
-
- /* Back off by 20ms per retry */
- msleep(f.retry * 20);
-
- if (f.retry > 20) {
- dev_err(dev, "Retry count exceeded\n");
- goto disable_irq;
- }
- } else {
- f.retry = 0;
- f.pos += f.frame_size;
- f.count++;
- }
+ return ret;

- if (f.count % 50 == 0)
- dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
- f.count, f.pos, f.fw->size);
+ if (f.complete)
+ break;
}

/* Wait for flash. */
@@ -3360,7 +3375,6 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto disable_irq;

- dev_dbg(dev, "Sent %u frames, %lld bytes\n", f.count, f.pos);

/*
* Wait for device to reset. Some bootloader versions do not assert
@@ -3370,7 +3384,6 @@ static int mxt_load_fw(struct device *dev)
mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);

data->in_bootloader = false;
-
disable_irq:
disable_irq(data->irq);
release_firmware:
--
2.17.1

2019-11-22 08:31:08

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 42/48] Input: Atmel: handle ReportID "0x00" while processing T5 messages

From: Deepak Das <[email protected]>

ReportID "0x00" is reserved by Atmel and should not be used by any
Atmel touch controller.

reportID is the first byte retrieved from T5 message payload.
Currently Atmel driver continues to process the T5 messages even if
the reportID "0x00" is returned by Touch Controller.

This commit modifies Atmel touch driver to return -EINVAL if ReportID
"0x00" is received while processing T5 messages.

Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e3ed74e7c270..8d6478834fd8 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -76,6 +76,7 @@
#define MXT_PROCI_TOUCHSEQUENCELOGGER 93
#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
#define MXT_PROCI_ACTIVESTYLUS_T107 107
+#define MXT_RPTID_RESERVED 0

/* MXT_GEN_MESSAGE_T5 object */
#define MXT_RPTID_NOMSG 0xff
@@ -1384,6 +1385,11 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
u8 report_id = message[0];
bool dump = data->debug_enabled;

+ if (report_id == MXT_RPTID_RESERVED) {
+ dev_err(&data->client->dev,
+ "Received Reserved ReportID 0x00\n");
+ return -EINVAL;
+ }
if (report_id == MXT_RPTID_NOMSG)
return 0;

@@ -1454,6 +1460,8 @@ static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
ret = mxt_proc_message(data,
data->msg_buf + data->T5_msg_size * i);

+ if (ret < 0)
+ return ret;
if (ret == 1)
num_valid++;
}
--
2.17.1

2019-11-22 08:31:25

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 43/48] Input: Atmel: use T44 object to process T5 messages

From: Deepak Das <[email protected]>

T44 object returns the count of valid T5 messages in the buffer. According
to atmel, this count should be the main criteria to read the number of T5
messages.

Following is the statement from atmel confirming the same :-
"For the readout of messages we recommend to stop after the last message
is read out from the buffer. One way to identify the amount of new messages
is to read T44. The other way is to monitor the /CHG line which indicates
independent of mode 0 or mode 1 if there are still data in the buffer.
0xFF indicates that there is no message pending anymore, but it is not
recommended to use this as the main criteria to control the
data transfer."

This commit modifies the logic to readout the T5 messages on the basis
of T44 object.

Signed-off-by: Deepak Das <[email protected]>
Signed-off-by: Sanjeev Chugh <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 55 +++++++++++++++---------
1 file changed, 35 insertions(+), 20 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 8d6478834fd8..0e4a870fafa5 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1489,7 +1489,7 @@ static u8 mxt_max_msg_read_count(struct mxt_data *data, u8 max_T5_msg_count)
return min(T5_msg_count_limit, max_T5_msg_count);
}

-static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
+static int mxt_process_messages_t44(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
int ret;
@@ -1502,7 +1502,7 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
data->T5_msg_size + 1, data->msg_buf);
if (ret) {
dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
- return IRQ_NONE;
+ return ret;
}

T5_msg_count = data->msg_buf[0];
@@ -1512,7 +1512,7 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
* Mode 0. It results in unnecessary I2C operations but it is benign.
*/
if (!T5_msg_count)
- return IRQ_NONE;
+ return processed_valid;

if (T5_msg_count > data->max_reportid) {
dev_warn(dev, "T44 count %d exceeded max report id\n",
@@ -1524,12 +1524,14 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
ret = mxt_proc_message(data, data->msg_buf + 1);
if (ret < 0) {
dev_warn(dev, "Unexpected invalid message\n");
- return IRQ_NONE;
+ return ret;
}

total_pending = T5_msg_count - 1;
- if (!total_pending)
+ if (!total_pending) {
+ processed_valid = 1;
goto end;
+ }

/* Process remaining messages if necessary */
T5_msg_count = mxt_max_msg_read_count(data, total_pending);
@@ -1553,7 +1555,7 @@ static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
data->update_input = false;
}

- return IRQ_HANDLED;
+ return processed_valid;
}

static int mxt_process_messages_until_invalid(struct mxt_data *data)
@@ -1583,7 +1585,7 @@ static int mxt_process_messages_until_invalid(struct mxt_data *data)
return -EBUSY;
}

-static irqreturn_t mxt_process_messages(struct mxt_data *data)
+static int mxt_process_messages(struct mxt_data *data)
{
int total_handled, num_handled;
u8 count = data->last_message_count;
@@ -1594,7 +1596,7 @@ static irqreturn_t mxt_process_messages(struct mxt_data *data)
/* include final invalid message */
total_handled = mxt_read_and_process_messages(data, count + 1);
if (total_handled < 0)
- return IRQ_NONE;
+ return total_handled;
/* if there were invalid messages, then we are done */
else if (total_handled <= count)
goto update_count;
@@ -1603,7 +1605,7 @@ static irqreturn_t mxt_process_messages(struct mxt_data *data)
do {
num_handled = mxt_read_and_process_messages(data, 2);
if (num_handled < 0)
- return IRQ_NONE;
+ return num_handled;

total_handled += num_handled;

@@ -1619,12 +1621,13 @@ static irqreturn_t mxt_process_messages(struct mxt_data *data)
data->update_input = false;
}

- return IRQ_HANDLED;
+ return total_handled;
}

static irqreturn_t mxt_interrupt(int irq, void *dev_id)
{
struct mxt_data *data = dev_id;
+ int ret;

if (data->in_bootloader) {
complete(&data->chg_completion);
@@ -1632,17 +1635,22 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
if (data->flash)
cancel_delayed_work_sync(&data->flash->work);

- return IRQ_RETVAL(mxt_check_bootloader(data));
+ ret = mxt_check_bootloader(data);
+ return IRQ_RETVAL(ret);
}

if (!data->object_table)
return IRQ_HANDLED;

- if (data->T44_address) {
- return mxt_process_messages_t44(data);
- } else {
- return mxt_process_messages(data);
- }
+ if (data->T44_address)
+ ret = mxt_process_messages_t44(data);
+ else
+ ret = mxt_process_messages(data);
+
+ if (ret <= 0)
+ return IRQ_NONE;
+ else
+ return IRQ_HANDLED;
}

static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
@@ -1777,8 +1785,11 @@ static int mxt_acquire_irq(struct mxt_data *data)
}

if (data->object_table && data->use_retrigen_workaround) {
- error = mxt_process_messages_until_invalid(data);
- if (error)
+ if (data->T44_address)
+ error = mxt_process_messages_t44(data);
+ else
+ error = mxt_process_messages_until_invalid(data);
+ if (error < 0)
return error;
}

@@ -4032,8 +4043,12 @@ static int mxt_start(struct mxt_data *data)
* Discard any touch messages still in message buffer
* from before chip went to sleep
*/
- ret = mxt_process_messages_until_invalid(data);
- if (ret)
+
+ if (data->T44_address)
+ ret = mxt_process_messages_t44(data);
+ else
+ ret = mxt_process_messages_until_invalid(data);
+ if (ret < 0)
break;

ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
--
2.17.1

2019-11-22 08:31:43

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 45/48] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status

From: Naveen Chakka <[email protected]>

To know the current communication status of the touch controller during
runtime, sysfs interface is added

sysfs interface: /sys/class/i2c-dev/i2c-*/device/*/touch_dev_stat
Executing the above sysfs interface provides two output values

1)Status of the touch device
value 0 represents device is inactive
value 1 represents device is active
2)Error counter
value represents the number of times device in inactive since last read

Signed-off-by: Naveen Chakka <[email protected]>
Signed-off-by: Sanjeev Chugh <[email protected]>
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 109 +++++++++++++++++++++--
1 file changed, 102 insertions(+), 7 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 78903806c0b4..d22a00ec69c1 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -25,6 +25,7 @@
#include <linux/property.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
+#include <linux/timer.h>
#include <asm/unaligned.h>
#include <linux/regulator/consumer.h>
#include <linux/workqueue.h>
@@ -222,6 +223,7 @@ enum t100_type {
#define MXT_CHG_DELAY 100 /* msec */
#define MXT_POWERON_DELAY 150 /* msec */
#define MXT_BOOTLOADER_WAIT 36E5 /* 1 minute */
+#define MXT_WATCHDOG_TIMEOUT 1000 /* msec */

/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -317,6 +319,12 @@ struct mxt_flash {
struct delayed_work work;
};

+struct mxt_statusinfo {
+ bool dev_status;
+ bool intp_triggered;
+ u32 error_count;
+};
+
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
@@ -372,6 +380,9 @@ struct mxt_data {
const char *pcfg_name;
const char *input_name;
struct mxt_flash *flash;
+ struct work_struct watchdog_work;
+ struct timer_list watchdog_timer;
+ struct mxt_statusinfo mxt_status;

/* Cached parameters from object table */
u16 T5_address;
@@ -1624,11 +1635,30 @@ static int mxt_process_messages(struct mxt_data *data)
return total_handled;
}

+static void mxt_start_wd_timer(struct mxt_data *data)
+{
+ mod_timer(&data->watchdog_timer, jiffies +
+ msecs_to_jiffies(MXT_WATCHDOG_TIMEOUT));
+}
+
+static void mxt_stop_wd_timer(struct mxt_data *data)
+{
+ /*
+ * Ensure we wait until the watchdog timer
+ * running on a different CPU finishes
+ */
+ del_timer_sync(&data->watchdog_timer);
+ cancel_work_sync(&data->watchdog_work);
+ del_timer_sync(&data->watchdog_timer);
+}
+
static irqreturn_t mxt_interrupt(int irq, void *dev_id)
{
struct mxt_data *data = dev_id;
int ret;

+ data->mxt_status.intp_triggered = true;
+
if (data->in_bootloader) {
complete(&data->chg_completion);

@@ -1636,21 +1666,25 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
cancel_delayed_work_sync(&data->flash->work);

ret = mxt_check_bootloader(data);
- return IRQ_RETVAL(ret);
+ ret = IRQ_RETVAL(ret);
+ goto exit;
}

- if (!data->object_table)
- return IRQ_HANDLED;
+ if (!data->object_table) {
+ ret = IRQ_HANDLED;
+ goto exit;
+ }

if (data->T44_address)
ret = mxt_process_messages_t44(data);
else
ret = mxt_process_messages(data);

- if (ret <= 0)
- return IRQ_NONE;
- else
- return IRQ_HANDLED;
+ ret = (ret <= 0) ? IRQ_NONE : IRQ_HANDLED;
+
+exit:
+ data->mxt_status.intp_triggered = false;
+ return ret;
}

static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
@@ -2970,6 +3004,36 @@ static int mxt_bootloader_status(struct mxt_data *data)
return 0;
}

+static void mxt_watchdog_timer(struct timer_list *t)
+{
+ struct mxt_data *data = from_timer(data, t, watchdog_timer);
+
+ if (!work_pending(&data->watchdog_work)) {
+ if (!data->mxt_status.intp_triggered)
+ schedule_work(&data->watchdog_work);
+ }
+
+ mxt_start_wd_timer(data);
+}
+
+static void mxt_watchdog_work(struct work_struct *work)
+{
+ struct mxt_data *data =
+ container_of(work, struct mxt_data, watchdog_work);
+ u16 info_buf;
+ int ret = 0;
+ u8 size = 2;
+
+ ret = __mxt_read_reg(data->client, 0, size, &info_buf);
+
+ if (ret) {
+ data->mxt_status.error_count++;
+ data->mxt_status.dev_status = false;
+ } else {
+ data->mxt_status.dev_status = true;
+ }
+}
+
static int mxt_initialize(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -3947,6 +4011,22 @@ static const struct attribute_group mxt_fw_attr_group = {
.attrs = mxt_fw_attrs,
};

+static ssize_t mxt_touch_device_status(struct device *dev, struct
+ device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (data->mxt_status.dev_status)
+ data->mxt_status.error_count = 0;
+
+ ret = snprintf(buf, PAGE_SIZE, "%d %d\n", data->mxt_status.dev_status,
+ data->mxt_status.error_count);
+ /* clear the error counter once it is read */
+ data->mxt_status.error_count = 0;
+ return ret;
+}
+
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
@@ -3958,6 +4038,7 @@ static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
mxt_debug_v2_enable_store);
static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);
static DEVICE_ATTR(t25, 0600, mxt_t25_selftest_show, mxt_t25_selftest_store);
+static DEVICE_ATTR(touch_dev_stat, 0444, mxt_touch_device_status, NULL);

static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3969,6 +4050,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_debug_v2_enable.attr,
&dev_attr_debug_notify.attr,
&dev_attr_t25.attr,
+ &dev_attr_touch_dev_stat.attr,
NULL
};

@@ -4321,6 +4403,13 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
msleep(MXT_RESET_TIME);
}

+ INIT_WORK(&data->watchdog_work, mxt_watchdog_work);
+
+ /* setup watchdog timer */
+ timer_setup(&data->watchdog_timer, mxt_watchdog_timer, 0);
+
+ mxt_start_wd_timer(data);
+
error = mxt_initialize(data);
if (error)
goto err_free_object;
@@ -4335,8 +4424,11 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return 0;

err_free_object:
+ cancel_work_sync(&data->watchdog_work);
+ mxt_stop_wd_timer(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
+ del_timer(&data->watchdog_timer);
if (data->reset_gpio) {
sysfs_remove_link(&client->dev.kobj, "reset");
gpiod_unexport(data->reset_gpio);
@@ -4359,6 +4451,9 @@ static int mxt_remove(struct i2c_client *client)
mxt_free_input_device(data);
mxt_free_object_table(data);

+ cancel_work_sync(&data->watchdog_work);
+ mxt_stop_wd_timer(data);
+
return 0;
}

--
2.17.1

2019-11-22 08:31:51

by Jiada Wang

[permalink] [raw]
Subject: [PATCH v6 47/48] Input: atmel_mxt_ts: Implement synchronization during various operation

From: Sanjeev Chugh <[email protected]>

There could be scope of race conditions when sysfs is being handled
and at the same time, device removal is occurring. For example,
we don't want the device removal to begin if the Atmel device
cfg update is going on or firmware update is going on. In such
cases, wait for device update to be completed before the removal
continues.

Thread Thread 2:
========================= =========================
mxt_update_fw_store() mxt_remove()
mutex_lock(&data->lock) ...
mxt_initialize() //Tries to acquire lock
request_firmware_nowait() mutex_lock(&data->lock)
... ==>waits for lock()
... .
... .
mutex_unlock(&data->lock) .
//Gets lock and proceeds
mxt_free_input_device();
...
mutex_unlock(&data->lock)
//Frees atmel driver data
kfree(data)

If the request_firmware_nowait() completes after the driver removal,
and callback is triggered. But kernel crashes since the module is
already removed.

This commit adds state machine to serialize such scenarios.

Signed-off-by: Sanjeev Chugh <[email protected]>
Signed-off-by: Bhuvanesh Surachari <[email protected]>
Signed-off-by: Jiada Wang <[email protected]>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 222 ++++++++++++++++++++---
1 file changed, 196 insertions(+), 26 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a867960dc59b..243820b102b8 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -224,6 +224,7 @@ enum t100_type {
#define MXT_POWERON_DELAY 150 /* msec */
#define MXT_BOOTLOADER_WAIT 36E5 /* 1 minute */
#define MXT_WATCHDOG_TIMEOUT 1000 /* msec */
+#define MXT_CONFIG_TIMEOUT 1000 /* msec */

/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -247,6 +248,20 @@ enum t100_type {

#define DEBUG_MSG_MAX 200

+enum device_state {
+ MXT_STATE_READY,
+ MXT_STATE_UPDATING_CONFIG,
+ MXT_STATE_UPDATING_CONFIG_ASYNC,
+ MXT_STATE_START,
+ MXT_STATE_STOP,
+ MXT_STATE_GOING_AWAY
+};
+
+enum mxt_cmd {
+ UPDATE_CFG,
+ UPDATE_FW
+};
+
struct mxt_info {
u8 family_id;
u8 variant_id;
@@ -426,11 +441,15 @@ struct mxt_data {
/* Indicates whether device is in suspend */
bool suspended;

- /* Indicates whether device is updating configuration */
- bool updating_config;
+ struct mutex lock;

unsigned int mtu;
bool t25_status;
+
+ /* State handling for probe/remove, open/close and config update */
+ enum device_state e_state;
+
+ struct completion update_cfg_completion;
};

struct mxt_vb2_buffer {
@@ -1657,6 +1676,7 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
struct mxt_data *data = dev_id;
int ret;

+ mutex_lock(&data->lock);
data->mxt_status.intp_triggered = true;

if (data->in_bootloader) {
@@ -1684,6 +1704,8 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)

exit:
data->mxt_status.intp_triggered = false;
+ mutex_unlock(&data->lock);
+
return ret;
}

@@ -2264,6 +2286,8 @@ static void mxt_free_object_table(struct mxt_data *data)
video_unregister_device(&data->dbg.vdev);
v4l2_device_unregister(&data->dbg.v4l2);
#endif
+ mutex_lock(&data->lock);
+
data->object_table = NULL;
kfree(data->info);
data->info = NULL;
@@ -2293,6 +2317,8 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T100_reportid_min = 0;
data->T100_reportid_max = 0;
data->max_reportid = 0;
+
+ mutex_unlock(&data->lock);
}

static int mxt_parse_object_table(struct mxt_data *data,
@@ -2974,8 +3000,15 @@ static int mxt_configure_objects(struct mxt_data *data,

static void mxt_config_cb(const struct firmware *cfg, void *ctx)
{
+ struct mxt_data *data = ctx;
+
mxt_configure_objects(ctx, cfg);
release_firmware(cfg);
+ complete(&data->update_cfg_completion);
+ mutex_lock(&data->lock);
+ if (data->e_state != MXT_STATE_GOING_AWAY)
+ data->e_state = MXT_STATE_READY;
+ mutex_unlock(&data->lock);
}

static int mxt_bootloader_status(struct mxt_data *data)
@@ -3088,6 +3121,15 @@ static int mxt_initialize(struct mxt_data *data)
goto err_free_sysfs;

if (data->cfg_name) {
+ mutex_lock(&data->lock);
+ if (data->e_state != MXT_STATE_GOING_AWAY) {
+ data->e_state = MXT_STATE_UPDATING_CONFIG_ASYNC;
+ } else {
+ mutex_unlock(&data->lock);
+ return -EBUSY;
+ }
+ reinit_completion(&data->update_cfg_completion);
+ mutex_unlock(&data->lock);
error = request_firmware_nowait(THIS_MODULE, true,
data->cfg_name,
&client->dev,
@@ -3867,30 +3909,58 @@ static int mxt_update_file_name(struct device *dev, char **file_name,
return 0;
}

+static int mxt_process_operation(struct mxt_data *data,
+ enum mxt_cmd cmd,
+ void *cmd_data);
+
static ssize_t mxt_update_fw_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct mxt_data *data = dev_get_drvdata(dev);
+ char *filename = NULL;
+ int ret;
+
+ ret = mxt_update_file_name(dev, &filename, buf, count);
+ if (ret)
+ goto out;
+
+ ret = mxt_process_operation(data, UPDATE_FW, filename);
+ kfree(filename);
+
+ if (ret)
+ goto out;
+
+ return count;
+out:
+ return ret;
+}
+
+static int mxt_fw_update(struct mxt_data *data,
+ const char *filename)
+{
+ struct device *dev = &data->client->dev;
+ unsigned int len = 0;
int error;

- error = mxt_update_file_name(dev, &data->fw_name, buf, count);
+ len = strlen(filename);
+ error = mxt_update_file_name(dev, &data->fw_name, filename, len);
if (error)
return error;

error = mxt_load_fw(dev);
if (error) {
dev_err(dev, "The firmware update failed(%d)\n", error);
- count = error;
- } else {
- dev_info(dev, "The firmware update succeeded\n");
-
- error = mxt_initialize(data);
- if (error)
- return error;
+ return error;
}

- return count;
+ error = mxt_initialize(data);
+ if (error)
+ return error;
+
+ dev_info(dev, "The firmware update succeeded\n");
+
+ return error;
}

static ssize_t mxt_update_cfg_store(struct device *dev,
@@ -3898,14 +3968,38 @@ static ssize_t mxt_update_cfg_store(struct device *dev,
const char *buf, size_t count)
{
struct mxt_data *data = dev_get_drvdata(dev);
+ char *filename = NULL;
+ int ret;
+
+ ret = mxt_update_file_name(dev, &filename, buf, count);
+ if (ret)
+ goto out;
+
+ ret = mxt_process_operation(data, UPDATE_CFG, filename);
+ kfree(filename);
+
+ if (ret)
+ goto out;
+
+ return count;
+out:
+ return ret;
+}
+
+static int mxt_cfg_update(struct mxt_data *data,
+ char *filename)
+{
+ struct device *dev = &data->client->dev;
const struct firmware *cfg;
+ unsigned int len = 0;
int ret;

- ret = mxt_update_file_name(dev, &data->cfg_name, buf, count);
+ len = strlen(filename);
+ ret = mxt_update_file_name(dev, &data->cfg_name, filename, len);
if (ret)
return ret;

- ret = request_firmware(&cfg, data->cfg_name, dev);
+ ret = request_firmware(&cfg, data->cfg_name, &data->client->dev);
if (ret < 0) {
dev_err(dev, "Failure to request config file %s\n",
data->cfg_name);
@@ -3913,8 +4007,6 @@ static ssize_t mxt_update_cfg_store(struct device *dev,
goto out;
}

- data->updating_config = true;
-
mxt_free_input_device(data);

if (data->suspended) {
@@ -3930,15 +4022,8 @@ static ssize_t mxt_update_cfg_store(struct device *dev,
}

ret = mxt_configure_objects(data, cfg);
- if (ret)
- goto release;
-
- ret = count;
-
-release:
release_firmware(cfg);
out:
- data->updating_config = false;
return ret;
}

@@ -4202,8 +4287,17 @@ static int mxt_start(struct mxt_data *data)
{
int ret = 0;

- if (!data->suspended || data->in_bootloader)
+ mutex_lock(&data->lock);
+ if (!data->suspended) {
+ mutex_unlock(&data->lock);
return 0;
+ }
+ if (data->in_bootloader || data->e_state != MXT_STATE_READY) {
+ mutex_unlock(&data->lock);
+ return -EBUSY;
+ }
+ data->e_state = MXT_STATE_START;
+ mutex_unlock(&data->lock);

switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
@@ -4247,8 +4341,12 @@ static int mxt_start(struct mxt_data *data)
ret = mxt_acquire_irq(data);
}

+ mutex_lock(&data->lock);
if (!ret)
data->suspended = false;
+ if (data->e_state != MXT_STATE_GOING_AWAY)
+ data->e_state = MXT_STATE_READY;
+ mutex_unlock(&data->lock);

return ret;
}
@@ -4257,8 +4355,19 @@ static int mxt_stop(struct mxt_data *data)
{
int ret;

- if (data->suspended || data->in_bootloader || data->updating_config)
+ mutex_lock(&data->lock);
+ if (data->suspended) {
+ mutex_unlock(&data->lock);
return 0;
+ }
+ if (data->in_bootloader || (data->e_state != MXT_STATE_READY &&
+ data->e_state != MXT_STATE_GOING_AWAY)) {
+ mutex_unlock(&data->lock);
+ return -EBUSY;
+ }
+ if (data->e_state != MXT_STATE_GOING_AWAY)
+ data->e_state = MXT_STATE_STOP;
+ mutex_unlock(&data->lock);

switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
@@ -4288,8 +4397,15 @@ static int mxt_stop(struct mxt_data *data)
break;
}

+ mutex_lock(&data->lock);
data->suspended = true;
+
+ if (data->e_state != MXT_STATE_GOING_AWAY)
+ data->e_state = MXT_STATE_READY;
+ mutex_unlock(&data->lock);
+
return 0;
+
}

static int mxt_input_open(struct input_dev *dev)
@@ -4443,12 +4559,15 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
client->adapter->nr, client->addr);

+ mutex_init(&data->lock);
+
data->client = client;
i2c_set_clientdata(client, data);

init_completion(&data->chg_completion);
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);
+ init_completion(&data->update_cfg_completion);
mutex_init(&data->debug_msg_lock);

data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
@@ -4542,6 +4661,18 @@ static int mxt_remove(struct i2c_client *client)
{
struct mxt_data *data = i2c_get_clientdata(client);

+ mutex_lock(&data->lock);
+ if (data->e_state == MXT_STATE_UPDATING_CONFIG_ASYNC ||
+ data->e_state == MXT_STATE_UPDATING_CONFIG) {
+ data->e_state = MXT_STATE_GOING_AWAY;
+ mutex_unlock(&data->lock);
+ mxt_wait_for_completion(data, &data->update_cfg_completion,
+ MXT_CONFIG_TIMEOUT);
+ } else {
+ data->e_state = MXT_STATE_GOING_AWAY;
+ mutex_unlock(&data->lock);
+ }
+
disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
if (data->reset_gpio) {
@@ -4598,6 +4729,45 @@ static int __maybe_unused mxt_resume(struct device *dev)
return ret;
}

+static int mxt_process_operation(struct mxt_data *data,
+ enum mxt_cmd cmd,
+ void *cmd_data)
+{
+ int ret = 0;
+
+ mutex_lock(&data->lock);
+ if (data->e_state != MXT_STATE_READY) {
+ mutex_unlock(&data->lock);
+ dev_err(&data->client->dev, "Atmel touch device is shutting down\n");
+ return -EBUSY;
+ }
+ data->e_state = MXT_STATE_UPDATING_CONFIG;
+ reinit_completion(&data->update_cfg_completion);
+ mutex_unlock(&data->lock);
+
+ switch (cmd) {
+ case UPDATE_CFG:
+ case UPDATE_FW:
+ if (cmd == UPDATE_CFG)
+ ret = mxt_cfg_update(data, (char *)cmd_data);
+ else
+ ret = mxt_fw_update(data, (char *)cmd_data);
+ break;
+
+ default:
+ break;
+ }
+ mutex_lock(&data->lock);
+ if (data->e_state != MXT_STATE_UPDATING_CONFIG_ASYNC) {
+ complete(&data->update_cfg_completion);
+ if (data->e_state != MXT_STATE_GOING_AWAY)
+ data->e_state = MXT_STATE_READY;
+ }
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);

static const struct of_device_id mxt_of_match[] = {
--
2.17.1

2020-01-10 12:05:58

by Jiada Wang

[permalink] [raw]
Subject: Re: [PATCH v6 00/48] atmel_mxt_ts misc

Hello dmitry and all

Kind reminder on this patch-set

Thanks,
Jiada

On 2019/11/22 17:23, Jiada Wang wrote:
> This patch-set forward ports Nick Dyer's work in ndyer/linux github repository
> as long as some other features and fixes
>
> Balasubramani Vivekanandan (2):
> Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c
> transaction
> Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin
>
> Dean Jenkins (1):
> Input: atmel_mxt_ts: return error from
> mxt_process_messages_until_invalid()
>
> Deepak Das (6):
> Input: Atmel: improve error handling in mxt_start()
> Input: Atmel: improve error handling in mxt_initialize()
> Input: Atmel: improve error handling in mxt_update_cfg()
> Input: Atmel: Improve error handling in mxt_initialize_input_device()
> Input: Atmel: handle ReportID "0x00" while processing T5 messages
> Input: Atmel: use T44 object to process T5 messages
>
> George G. Davis (1):
> input: atmel_mxt_ts: export GPIO reset line via sysfs
>
> Jiada Wang (3):
> Input: introduce input_mt_report_slot_inactive
> Input: atmel_mxt_ts - eliminate data->raw_info_block
> Input: atmel_mxt_ts - Fix compilation warning
>
> Karl Tsou (1):
> Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
>
> Kautuk Consul (2):
> Input: atmel_mxt_ts - Change call-points of mxt_free_* functions
> Input: atmel_mxt_ts - rely on calculated_crc rather than file
> config_crc
>
> Naveen Chakka (2):
> input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen
> status
> input: atmel_mxt_ts: added sysfs interface to update atmel T38 data
>
> Nick Dyer (26):
> Input: atmel_mxt_ts - rework sysfs init/remove
> Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when
> necessary
> Input: atmel_mxt_ts - split large i2c transfers into blocks
> Input: atmel_mxt_ts - output status from T48 Noise Supression
> Input: atmel_mxt_ts - output status from T42 Touch Suppression
> Input: atmel_mxt_ts - implement T9 vector/orientation support
> Input: atmel_mxt_ts - implement T15 Key Array support
> Input: atmel_mxt_ts - handle reports from T47 Stylus object
> Input: atmel_mxt_ts - implement support for T107 active stylus
> Input: atmel_mxt_ts - release touch state during suspend
> Input: atmel_mxt_ts - add regulator control support
> Input: atmel_mxt_ts - report failures in suspend/resume
> Input: atmel_mxt_ts - allow specification of firmware file name
> Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
> Input: atmel_mxt_ts - allow input name to be specified in platform
> data
> Input: atmel_mxt_ts - refactor firmware flash to extract context into
> struct
> Input: atmel_mxt_ts - refactor code to enter bootloader into separate
> func
> Input: atmel_mxt_ts - combine bootloader version query with probe
> Input: atmel_mxt_ts - improve bootloader state machine handling
> Input: atmel_mxt_ts - rename bl_completion to chg_completion
> Input: atmel_mxt_ts - make bootloader interrupt driven
> Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
> Input: atmel_mxt_ts - implement I2C retries
> Input: atmel_mxt_ts - orientation is not present in hover
> Input: atmel_mxt_ts - implement debug output for messages
> Input: atmel_mxt_ts - implement improved debug message interface
>
> Nikhil Ravindran (1):
> Input: atmel_mxt_ts: Add support for run self-test routine.
>
> Sanjeev Chugh (1):
> Input: atmel_mxt_ts: Implement synchronization during various
> operation
>
> karl tsou (1):
> Input: atmel_mxt_ts - add config checksum attribute to sysfs
>
> keerthikumarp (1):
> input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel
> touch panel controller in detachable displays.
>
> ---
> v6:
> Fix issue in commit ("Input: introduce input_mt_report_slot_inactive")
> reported by kernel test robot
>
> v5:
> Following commits have been updated to address warnings & errors
> reported by kbuild test robot
> Input: atmel_mxt_ts - make bootloader interrupt driven
> Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
>
> Following commit has been updated
> Input: introduce input_mt_report_slot_inactive
>
> v4:
> Following commit in v3 patch-set has been removed
> Input: switch to use return value of input_mt_report_slot_state
>
> Following commit has been updated to address checkpatch warning
> Input: atmel_mxt_ts: Implement synchronization during various operation
>
> v3:
> Following commits have been updated compared to v2 patchset
> Input: atmel_mxt_ts - implement debug output for messages
> - added inline comment
> Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msg
> - changed dev_info() to dev_dbg()
>
> v2:
> Following commit in v1 patchset has been split into two commits
> Input: introduce input_mt_report_slot_inactive
>
> Following commits have been updated compared to v1 patchset
> Input: atmel_mxt_ts - split large i2c transfers into blocks
> Input: atmel_mxt_ts - output status from T42 Touch Suppression
>
> Following commits in v1 patchset have been squashed
> Input: touchscreen: Atmel: Add device tree support for T15 key array objects
> Input: atmel_mxt_ts - check data->input_dev is not null in mxt_input_sync()
> Input: atmel_mxt_ts - check firmware format before entering bootloader
> Input: atmel_mxt_ts: update stale use_retrigen_workaround flag
> input: atmel_mxt_ts: move bootloader probe from mxt_initialize()
> input: Atmel: limit the max bytes transferred while reading T5 messages
> Input: atmel_mxt_ts: Use msecs_to_jiffies() instead of HZ
> Input: atmel_mxt_ts: Use complete when in_bootloader true
> Input: atmel_mxt_ts: Prevent crash due to freeing of input device
> input: atmel_mxt_ts: Add NULL check for sysfs attribute debug_msg_attr
>
> Following commits in v1 patchset have been dropped:
> Input: atmel_mxt_ts - configure and use gpios as real gpios
> Input: touchscreen: Atmel: Enable IRQ_DISABLE_UNLAZY flag for interrupt
> Input: atmel_mxt_ts - add memory access interface via sysfs
> Input: atmel_mxt_ts: Remove sysfs attributes during driver detach
> Input: atmel_mxt_ts: Avoid race condition in freeing of input device
>
>
> v1: initial version
> ---
> .../bindings/input/atmel,maxtouch.txt | 14 +
> MAINTAINERS | 1 +
> drivers/hid/hid-alps.c | 3 +-
> drivers/hid/hid-multitouch.c | 6 +-
> drivers/input/input-mt.c | 2 +-
> drivers/input/misc/xen-kbdfront.c | 2 +-
> drivers/input/mouse/elan_i2c_core.c | 2 +-
> drivers/input/touchscreen/atmel_mxt_ts.c | 2266 ++++++++++++++---
> drivers/input/touchscreen/cyttsp4_core.c | 5 +-
> drivers/input/touchscreen/cyttsp_core.c | 2 +-
> drivers/input/touchscreen/melfas_mip4.c | 4 +-
> drivers/input/touchscreen/mms114.c | 2 +-
> drivers/input/touchscreen/raspberrypi-ts.c | 2 +-
> drivers/input/touchscreen/stmfts.c | 2 +-
> include/dt-bindings/input/atmel_mxt_ts.h | 22 +
> include/linux/input/mt.h | 5 +
> 16 files changed, 1984 insertions(+), 356 deletions(-)
> create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h
>

2020-01-27 17:42:39

by Bartosz Szczepanek

[permalink] [raw]
Subject: [PATCH v6 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven

Hi,

I've been testing this patchset on Chromebook equipped with Atmel touchscreen &
touchpad. In my setup, this particular patch seems to introduce a regression
on firmware update:

> localhost /sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ATML0001:00 # echo maxtouch-ts.fw > update_fw
> bash: echo: write error: Remote I/O error

Kernel logs show that the reason is failed I2C transfer:

> [ 111.632131] atmel_mxt_ts i2c-ATML0001:00: Found bootloader addr:27 ID:21 version:4
> [ 111.637711] atmel_mxt_ts i2c-ATML0001:00: Unlocking bootloader
> [ 129.155091] atmel_mxt_ts i2c-ATML0001:00: Sent 1356 frames, 212224 bytes
> [ 129.263269] atmel_mxt_ts i2c-ATML0001:00: The firmware update succeeded
> [ 129.263952] atmel_mxt_ts i2c-ATML0001:00: __mxt_read_chunk: i2c transfer failed (-121)
> [ 129.265072] atmel_mxt_ts i2c-ATML0001:00: mxt_bootloader_read: i2c recv failed (-121)
> [ 129.265588] atmel_mxt_ts i2c-ATML0001:00: Trying alternate bootloader address
> [ 129.266375] atmel_mxt_ts i2c-ATML0001:00: mxt_bootloader_read: i2c recv failed (-121)

Surprisingly, only touchscreen device is affected. When I checked out to
119e1b7e8481 ("Input: atmel_mxt_ts - refactor code to enter bootloader into
separate func") all worked fine. In between these commits I got some mixed
results, including timeout while waiting for completion:

> [ 190.006174] atmel_mxt_ts i2c-ATML0001:00: Found bootloader addr:27 ID:21 version:4
> [ 190.317819] atmel_mxt_ts i2c-ATML0001:00: Wait for completion timed out.
> [ 190.318267] atmel_mxt_ts i2c-ATML0001:00: Update wait error -110
> [ 190.319310] atmel_mxt_ts i2c-ATML0001:00: Unlocking bootloader
> [ 208.369825] atmel_mxt_ts i2c-ATML0001:00: Sent 1356 frames, 212224 bytes
> [ 208.536942] atmel_mxt_ts i2c-ATML0001:00: The firmware update succeeded
> [ 208.544835] atmel_mxt_ts i2c-ATML0001:00: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
> [ 208.547623] atmel_mxt_ts i2c-ATML0001:00: Touchscreen size X4095Y2729

Some more details - the touchscreen device reports itself as:

> atmel_mxt_ts i2c-ATML0001:00: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40

Due to Chromebook limitations on kernel version, I'm running 4.19 kernel
with patches backported from master (so that atmel_mxt_ts is aligned between
master and 4.19). The platform is Samsung Chromebook Pro.

Best regards,
Bartosz

2020-01-29 12:00:39

by Jiada Wang

[permalink] [raw]
Subject: Re: [PATCH v6 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven

Hi Bartosz

thanks for the report,
I will test firmware update on my chromebook

Thanks,
Jiada

On 2020/01/28 2:41, Bartosz Szczepanek wrote:
> Hi,
>
> I've been testing this patchset on Chromebook equipped with Atmel touchscreen &
> touchpad. In my setup, this particular patch seems to introduce a regression
> on firmware update:
>
>> localhost /sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ATML0001:00 # echo maxtouch-ts.fw > update_fw
>> bash: echo: write error: Remote I/O error
>
> Kernel logs show that the reason is failed I2C transfer:
>
>> [ 111.632131] atmel_mxt_ts i2c-ATML0001:00: Found bootloader addr:27 ID:21 version:4
>> [ 111.637711] atmel_mxt_ts i2c-ATML0001:00: Unlocking bootloader
>> [ 129.155091] atmel_mxt_ts i2c-ATML0001:00: Sent 1356 frames, 212224 bytes
>> [ 129.263269] atmel_mxt_ts i2c-ATML0001:00: The firmware update succeeded
>> [ 129.263952] atmel_mxt_ts i2c-ATML0001:00: __mxt_read_chunk: i2c transfer failed (-121)
>> [ 129.265072] atmel_mxt_ts i2c-ATML0001:00: mxt_bootloader_read: i2c recv failed (-121)
>> [ 129.265588] atmel_mxt_ts i2c-ATML0001:00: Trying alternate bootloader address
>> [ 129.266375] atmel_mxt_ts i2c-ATML0001:00: mxt_bootloader_read: i2c recv failed (-121)
>
> Surprisingly, only touchscreen device is affected. When I checked out to
> 119e1b7e8481 ("Input: atmel_mxt_ts - refactor code to enter bootloader into
> separate func") all worked fine. In between these commits I got some mixed
> results, including timeout while waiting for completion:
>
>> [ 190.006174] atmel_mxt_ts i2c-ATML0001:00: Found bootloader addr:27 ID:21 version:4
>> [ 190.317819] atmel_mxt_ts i2c-ATML0001:00: Wait for completion timed out.
>> [ 190.318267] atmel_mxt_ts i2c-ATML0001:00: Update wait error -110
>> [ 190.319310] atmel_mxt_ts i2c-ATML0001:00: Unlocking bootloader
>> [ 208.369825] atmel_mxt_ts i2c-ATML0001:00: Sent 1356 frames, 212224 bytes
>> [ 208.536942] atmel_mxt_ts i2c-ATML0001:00: The firmware update succeeded
>> [ 208.544835] atmel_mxt_ts i2c-ATML0001:00: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
>> [ 208.547623] atmel_mxt_ts i2c-ATML0001:00: Touchscreen size X4095Y2729
>
> Some more details - the touchscreen device reports itself as:
>
>> atmel_mxt_ts i2c-ATML0001:00: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
>
> Due to Chromebook limitations on kernel version, I'm running 4.19 kernel
> with patches backported from master (so that atmel_mxt_ts is aligned between
> master and 4.19). The platform is Samsung Chromebook Pro.
>
> Best regards,
> Bartosz
>

2020-02-12 08:48:29

by Jiada Wang

[permalink] [raw]
Subject: Re: [PATCH v6 24/48] Input: atmel_mxt_ts - make bootloader interrupt driven

Hello Bartosz

On 2020/01/28 2:41, Bartosz Szczepanek wrote:
> Hi,
>
> I've been testing this patchset on Chromebook equipped with Atmel touchscreen &
> touchpad. In my setup, this particular patch seems to introduce a regression
> on firmware update:
>
>> localhost /sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-ATML0001:00 # echo maxtouch-ts.fw > update_fw
>> bash: echo: write error: Remote I/O error
>
> Kernel logs show that the reason is failed I2C transfer:
>
>> [ 111.632131] atmel_mxt_ts i2c-ATML0001:00: Found bootloader addr:27 ID:21 version:4
>> [ 111.637711] atmel_mxt_ts i2c-ATML0001:00: Unlocking bootloader
>> [ 129.155091] atmel_mxt_ts i2c-ATML0001:00: Sent 1356 frames, 212224 bytes
>> [ 129.263269] atmel_mxt_ts i2c-ATML0001:00: The firmware update succeeded
>> [ 129.263952] atmel_mxt_ts i2c-ATML0001:00: __mxt_read_chunk: i2c transfer failed (-121)
>> [ 129.265072] atmel_mxt_ts i2c-ATML0001:00: mxt_bootloader_read: i2c recv failed (-121)
>> [ 129.265588] atmel_mxt_ts i2c-ATML0001:00: Trying alternate bootloader address
>> [ 129.266375] atmel_mxt_ts i2c-ATML0001:00: mxt_bootloader_read: i2c recv failed (-121)
>
> Surprisingly, only touchscreen device is affected. When I checked out to
> 119e1b7e8481 ("Input: atmel_mxt_ts - refactor code to enter bootloader into
> separate func") all worked fine. In between these commits I got some mixed
> results, including timeout while waiting for completion:
>
>> [ 190.006174] atmel_mxt_ts i2c-ATML0001:00: Found bootloader addr:27 ID:21 version:4
>> [ 190.317819] atmel_mxt_ts i2c-ATML0001:00: Wait for completion timed out.
>> [ 190.318267] atmel_mxt_ts i2c-ATML0001:00: Update wait error -110
>> [ 190.319310] atmel_mxt_ts i2c-ATML0001:00: Unlocking bootloader
>> [ 208.369825] atmel_mxt_ts i2c-ATML0001:00: Sent 1356 frames, 212224 bytes
>> [ 208.536942] atmel_mxt_ts i2c-ATML0001:00: The firmware update succeeded
>> [ 208.544835] atmel_mxt_ts i2c-ATML0001:00: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
>> [ 208.547623] atmel_mxt_ts i2c-ATML0001:00: Touchscreen size X4095Y2729
>
> Some more details - the touchscreen device reports itself as:
>
>> atmel_mxt_ts i2c-ATML0001:00: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
>
> Due to Chromebook limitations on kernel version, I'm running 4.19 kernel
> with patches backported from master (so that atmel_mxt_ts is aligned between
> master and 4.19). The platform is Samsung Chromebook Pro.
>
I have found the root cause for the regression,
will submit v7 patch-set shortly,
if you could validate for the update,
it will be very helpful

thanks,
Jiada
> Best regards,
> Bartosz
>