In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <[email protected]>
Signed-off-by: Ansuel Smith <[email protected]>
---
.../bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
drivers/cpufreq/qcom-cpufreq-nvmem.c | 181 ++++++++++++++++--
4 files changed, 173 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
index 4751029b9b74..64f07417ecfb 100644
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -19,7 +19,8 @@ In 'cpu' nodes:
In 'operating-points-v2' table:
- compatible: Should be
- - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+ - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
+ apq8064, ipq8064, msm8960 and ipq8074.
Optional properties:
--------------------
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 3858d86cf409..15c1a1231516 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -128,7 +128,7 @@ config ARM_OMAP2PLUS_CPUFREQ
config ARM_QCOM_CPUFREQ_NVMEM
tristate "Qualcomm nvmem based CPUFreq"
- depends on ARM64
+ depends on ARCH_QCOM
depends on QCOM_QFPROM
depends on QCOM_SMEM
select PM_OPP
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index f2ae9cd455c1..cb9db16bea61 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -141,6 +141,11 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "ti,dra7", },
{ .compatible = "ti,omap3", },
+ { .compatible = "qcom,ipq8064", },
+ { .compatible = "qcom,apq8064", },
+ { .compatible = "qcom,msm8974", },
+ { .compatible = "qcom,msm8960", },
+
{ }
};
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index f0d2d5035413..35a616189030 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -49,12 +49,14 @@ struct qcom_cpufreq_drv;
struct qcom_cpufreq_match_data {
int (*get_version)(struct device *cpu_dev,
struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
struct qcom_cpufreq_drv *drv);
const char **genpd_names;
};
struct qcom_cpufreq_drv {
- struct opp_table **opp_tables;
+ struct opp_table **names_opp_tables;
+ struct opp_table **hw_opp_tables;
struct opp_table **genpd_opp_tables;
u32 versions;
const struct qcom_cpufreq_match_data *data;
@@ -62,6 +64,81 @@ struct qcom_cpufreq_drv {
static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+static void get_krait_bin_format_a(struct device *cpu_dev,
+ int *speed, int *pvs, int *pvs_ver,
+ struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+ u32 pte_efuse;
+
+ pte_efuse = *((u32 *)buf);
+
+ *speed = pte_efuse & 0xf;
+ if (*speed == 0xf)
+ *speed = (pte_efuse >> 4) & 0xf;
+
+ if (*speed == 0xf) {
+ *speed = 0;
+ dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed);
+ } else {
+ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
+ }
+
+ *pvs = (pte_efuse >> 10) & 0x7;
+ if (*pvs == 0x7)
+ *pvs = (pte_efuse >> 13) & 0x7;
+
+ if (*pvs == 0x7) {
+ *pvs = 0;
+ dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs);
+ } else {
+ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
+ }
+}
+
+static void get_krait_bin_format_b(struct device *cpu_dev,
+ int *speed, int *pvs, int *pvs_ver,
+ struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+ u32 pte_efuse, redundant_sel;
+
+ pte_efuse = *((u32 *)buf);
+ redundant_sel = (pte_efuse >> 24) & 0x7;
+ *speed = pte_efuse & 0x7;
+
+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+ *pvs_ver = (pte_efuse >> 4) & 0x3;
+
+ switch (redundant_sel) {
+ case 1:
+ *speed = (pte_efuse >> 27) & 0xf;
+ break;
+ case 2:
+ *pvs = (pte_efuse >> 27) & 0xf;
+ break;
+ }
+
+ /* Check SPEED_BIN_BLOW_STATUS */
+ if (pte_efuse & BIT(3)) {
+ dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
+ } else {
+ dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n");
+ *speed = 0;
+ }
+
+ /* Check PVS_BLOW_STATUS */
+ pte_efuse = *(((u32 *)buf) + 4);
+ pte_efuse &= BIT(21);
+ if (pte_efuse) {
+ dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
+ } else {
+ dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n");
+ *pvs = 0;
+ }
+
+ dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
+}
+
static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
{
size_t len;
@@ -93,11 +170,13 @@ static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
struct qcom_cpufreq_drv *drv)
{
size_t len;
u8 *speedbin;
enum _msm8996_version msm8996_version;
+ *pvs_name = NULL;
msm8996_version = qcom_cpufreq_get_msm_id();
if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
@@ -125,10 +204,44 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
return 0;
}
+static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
+ struct qcom_cpufreq_drv *drv)
+{
+ int speed = 0, pvs = 0, pvs_ver = 0;
+ u8 *speedbin;
+ size_t len;
+
+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+ if (len == 4) {
+ get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver,
+ speedbin_nvmem, speedbin);
+ } else if (len == 8) {
+ get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver,
+ speedbin_nvmem, speedbin);
+ } else {
+ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
+ return -ENODEV;
+ }
+
+ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
+ speed, pvs, pvs_ver);
+
+ drv->versions = (1 << speed);
+
+ kfree(speedbin);
+ return 0;
+}
+
static const struct qcom_cpufreq_match_data match_data_kryo = {
.get_version = qcom_cpufreq_kryo_name_version,
};
+static const struct qcom_cpufreq_match_data match_data_krait = {
+ .get_version = qcom_cpufreq_krait_name_version,
+};
+
static const char *qcs404_genpd_names[] = { "cpr", NULL };
static const struct qcom_cpufreq_match_data match_data_qcs404 = {
@@ -141,6 +254,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
struct nvmem_cell *speedbin_nvmem;
struct device_node *np;
struct device *cpu_dev;
+ char *pvs_name = "speedXX-pvsXX-vXX";
unsigned cpu;
const struct of_device_id *match;
int ret;
@@ -153,7 +267,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
if (!np)
return -ENOENT;
- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;
@@ -181,7 +295,8 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
goto free_drv;
}
- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+ ret = drv->data->get_version(cpu_dev,
+ speedbin_nvmem, &pvs_name, drv);
if (ret) {
nvmem_cell_put(speedbin_nvmem);
goto free_drv;
@@ -190,12 +305,20 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
}
of_node_put(np);
- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+ drv->names_opp_tables = kcalloc(num_possible_cpus(),
+ sizeof(*drv->names_opp_tables),
GFP_KERNEL);
- if (!drv->opp_tables) {
+ if (!drv->names_opp_tables) {
ret = -ENOMEM;
goto free_drv;
}
+ drv->hw_opp_tables = kcalloc(num_possible_cpus(),
+ sizeof(*drv->hw_opp_tables),
+ GFP_KERNEL);
+ if (!drv->hw_opp_tables) {
+ ret = -ENOMEM;
+ goto free_opp1;
+ }
drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
sizeof(*drv->genpd_opp_tables),
@@ -213,11 +336,23 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
}
if (drv->data->get_version) {
- drv->opp_tables[cpu] =
- dev_pm_opp_set_supported_hw(cpu_dev,
- &drv->versions, 1);
- if (IS_ERR(drv->opp_tables[cpu])) {
- ret = PTR_ERR(drv->opp_tables[cpu]);
+
+ if (pvs_name) {
+ drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name(
+ cpu_dev,
+ pvs_name);
+ if (IS_ERR(drv->names_opp_tables[cpu])) {
+ ret = PTR_ERR(drv->names_opp_tables[cpu]);
+ dev_err(cpu_dev, "Failed to add OPP name %s\n",
+ pvs_name);
+ goto free_opp;
+ }
+ }
+
+ drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw(
+ cpu_dev, &drv->versions, 1);
+ if (IS_ERR(drv->hw_opp_tables[cpu])) {
+ ret = PTR_ERR(drv->hw_opp_tables[cpu]);
dev_err(cpu_dev,
"Failed to set supported hardware\n");
goto free_genpd_opp;
@@ -259,11 +394,18 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
kfree(drv->genpd_opp_tables);
free_opp:
for_each_possible_cpu(cpu) {
- if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
+ if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu]))
+ break;
+ dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]);
+ }
+ for_each_possible_cpu(cpu) {
+ if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu]))
break;
- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
}
- kfree(drv->opp_tables);
+ kfree(drv->hw_opp_tables);
+free_opp1:
+ kfree(drv->names_opp_tables);
free_drv:
kfree(drv);
@@ -278,13 +420,16 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
platform_device_unregister(cpufreq_dt_pdev);
for_each_possible_cpu(cpu) {
- if (drv->opp_tables[cpu])
- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+ if (drv->names_opp_tables[cpu])
+ dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]);
+ if (drv->hw_opp_tables[cpu])
+ dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
if (drv->genpd_opp_tables[cpu])
dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
}
- kfree(drv->opp_tables);
+ kfree(drv->names_opp_tables);
+ kfree(drv->hw_opp_tables);
kfree(drv->genpd_opp_tables);
kfree(drv);
@@ -303,6 +448,10 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+ { .compatible = "qcom,ipq8064", .data = &match_data_krait },
+ { .compatible = "qcom,apq8064", .data = &match_data_krait },
+ { .compatible = "qcom,msm8974", .data = &match_data_krait },
+ { .compatible = "qcom,msm8960", .data = &match_data_krait },
{},
};
--
2.25.0
On Wed, Feb 19, 2020 at 09:55:45PM +0100, Ansuel Smith wrote:
> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
> that has KRAIT processors the voltage/current value of each OPP
> varies based on the silicon variant in use.
>
> The required OPP related data is determined based on
> the efuse value. This is similar to the existing code for
> kryo cores. So adding support for krait cores here.
>
> Signed-off-by: Sricharan R <[email protected]>
> Signed-off-by: Ansuel Smith <[email protected]>
> ---
> .../bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
If you respin, please split bindings to a separate patch.
> drivers/cpufreq/Kconfig.arm | 2 +-
> drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
> drivers/cpufreq/qcom-cpufreq-nvmem.c | 181 ++++++++++++++++--
> 4 files changed, 173 insertions(+), 18 deletions(-)
>
On 19-02-20, 21:55, Ansuel Smith wrote:
> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
> that has KRAIT processors the voltage/current value of each OPP
> varies based on the silicon variant in use.
>
> The required OPP related data is determined based on
> the efuse value. This is similar to the existing code for
> kryo cores. So adding support for krait cores here.
>
> Signed-off-by: Sricharan R <[email protected]>
> Signed-off-by: Ansuel Smith <[email protected]>
> ---
> .../bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
> drivers/cpufreq/Kconfig.arm | 2 +-
> drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
> drivers/cpufreq/qcom-cpufreq-nvmem.c | 181 ++++++++++++++++--
> 4 files changed, 173 insertions(+), 18 deletions(-)
Can someone from Qcom team review this ?
--
viresh
See inline.
On Wed, Feb 19, 2020 at 10:56 PM Ansuel Smith <[email protected]> wrote:
>
> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
> that has KRAIT processors the voltage/current value of each OPP
> varies based on the silicon variant in use.
>
> The required OPP related data is determined based on
> the efuse value. This is similar to the existing code for
> kryo cores. So adding support for krait cores here.
>
> Signed-off-by: Sricharan R <[email protected]>
> Signed-off-by: Ansuel Smith <[email protected]>
> ---
> .../bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
> drivers/cpufreq/Kconfig.arm | 2 +-
> drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
> drivers/cpufreq/qcom-cpufreq-nvmem.c | 181 ++++++++++++++++--
> 4 files changed, 173 insertions(+), 18 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> index 4751029b9b74..64f07417ecfb 100644
> --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> @@ -19,7 +19,8 @@ In 'cpu' nodes:
>
> In 'operating-points-v2' table:
> - compatible: Should be
> - - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
> + - 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
> + apq8064, ipq8064, msm8960 and ipq8074.
>
> Optional properties:
> --------------------
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 3858d86cf409..15c1a1231516 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -128,7 +128,7 @@ config ARM_OMAP2PLUS_CPUFREQ
>
> config ARM_QCOM_CPUFREQ_NVMEM
> tristate "Qualcomm nvmem based CPUFreq"
> - depends on ARM64
> + depends on ARCH_QCOM
> depends on QCOM_QFPROM
> depends on QCOM_SMEM
> select PM_OPP
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index f2ae9cd455c1..cb9db16bea61 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -141,6 +141,11 @@ static const struct of_device_id blacklist[] __initconst = {
> { .compatible = "ti,dra7", },
> { .compatible = "ti,omap3", },
>
> + { .compatible = "qcom,ipq8064", },
> + { .compatible = "qcom,apq8064", },
> + { .compatible = "qcom,msm8974", },
> + { .compatible = "qcom,msm8960", },
> +
> { }
> };
>
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index f0d2d5035413..35a616189030 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -49,12 +49,14 @@ struct qcom_cpufreq_drv;
> struct qcom_cpufreq_match_data {
> int (*get_version)(struct device *cpu_dev,
> struct nvmem_cell *speedbin_nvmem,
> + char **pvs_name,
> struct qcom_cpufreq_drv *drv);
> const char **genpd_names;
> };
>
> struct qcom_cpufreq_drv {
> - struct opp_table **opp_tables;
> + struct opp_table **names_opp_tables;
> + struct opp_table **hw_opp_tables;
> struct opp_table **genpd_opp_tables;
> u32 versions;
> const struct qcom_cpufreq_match_data *data;
> @@ -62,6 +64,81 @@ struct qcom_cpufreq_drv {
>
> static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
>
> +static void get_krait_bin_format_a(struct device *cpu_dev,
> + int *speed, int *pvs, int *pvs_ver,
> + struct nvmem_cell *pvs_nvmem, u8 *buf)
> +{
> + u32 pte_efuse;
> +
> + pte_efuse = *((u32 *)buf);
> +
> + *speed = pte_efuse & 0xf;
> + if (*speed == 0xf)
> + *speed = (pte_efuse >> 4) & 0xf;
> +
> + if (*speed == 0xf) {
> + *speed = 0;
> + dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed);
> + } else {
> + dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
> + }
> +
> + *pvs = (pte_efuse >> 10) & 0x7;
> + if (*pvs == 0x7)
> + *pvs = (pte_efuse >> 13) & 0x7;
> +
> + if (*pvs == 0x7) {
> + *pvs = 0;
> + dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs);
> + } else {
> + dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
> + }
> +}
> +
> +static void get_krait_bin_format_b(struct device *cpu_dev,
> + int *speed, int *pvs, int *pvs_ver,
> + struct nvmem_cell *pvs_nvmem, u8 *buf)
> +{
> + u32 pte_efuse, redundant_sel;
> +
> + pte_efuse = *((u32 *)buf);
> + redundant_sel = (pte_efuse >> 24) & 0x7;
> + *speed = pte_efuse & 0x7;
Why wouldn't you move this into the switch?
> +
> + /* 4 bits of PVS are in efuse register bits 31, 8-6. */
> + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
> + *pvs_ver = (pte_efuse >> 4) & 0x3;
Same as above.
> +
> + switch (redundant_sel) {
> + case 1:
> + *speed = (pte_efuse >> 27) & 0xf;
> + break;
> + case 2:
> + *pvs = (pte_efuse >> 27) & 0xf;
> + break;
IMHO, it is worth to handle the default case here.
> + }
> +
> + /* Check SPEED_BIN_BLOW_STATUS */
> + if (pte_efuse & BIT(3)) {
> + dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
> + } else {
> + dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n");
> + *speed = 0;
> + }
> +
> + /* Check PVS_BLOW_STATUS */
> + pte_efuse = *(((u32 *)buf) + 4);
> + pte_efuse &= BIT(21);
> + if (pte_efuse) {
> + dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
> + } else {
> + dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n");
> + *pvs = 0;
> + }
> +
> + dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
> +}
> +
> static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
> {
> size_t len;
> @@ -93,11 +170,13 @@ static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
>
> static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
> struct nvmem_cell *speedbin_nvmem,
> + char **pvs_name,
> struct qcom_cpufreq_drv *drv)
> {
> size_t len;
> u8 *speedbin;
> enum _msm8996_version msm8996_version;
> + *pvs_name = NULL;
>
> msm8996_version = qcom_cpufreq_get_msm_id();
> if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
> @@ -125,10 +204,44 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
> return 0;
> }
>
> +static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
> + struct nvmem_cell *speedbin_nvmem,
> + char **pvs_name,
> + struct qcom_cpufreq_drv *drv)
> +{
> + int speed = 0, pvs = 0, pvs_ver = 0;
> + u8 *speedbin;
> + size_t len;
> +
> + speedbin = nvmem_cell_read(speedbin_nvmem, &len);
> + if (len == 4) {
Preferably doing this with switch-case.
> + get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver,
> + speedbin_nvmem, speedbin);
> + } else if (len == 8) {
> + get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver,
> + speedbin_nvmem, speedbin);
> + } else {
> + dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
> + return -ENODEV;
> + }
> +
> + snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
> + speed, pvs, pvs_ver);
> +
> + drv->versions = (1 << speed);
> +
> + kfree(speedbin);
> + return 0;
> +}
> +
> static const struct qcom_cpufreq_match_data match_data_kryo = {
> .get_version = qcom_cpufreq_kryo_name_version,
> };
>
> +static const struct qcom_cpufreq_match_data match_data_krait = {
> + .get_version = qcom_cpufreq_krait_name_version,
> +};
> +
> static const char *qcs404_genpd_names[] = { "cpr", NULL };
>
> static const struct qcom_cpufreq_match_data match_data_qcs404 = {
> @@ -141,6 +254,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
> struct nvmem_cell *speedbin_nvmem;
> struct device_node *np;
> struct device *cpu_dev;
> + char *pvs_name = "speedXX-pvsXX-vXX";
> unsigned cpu;
> const struct of_device_id *match;
> int ret;
> @@ -153,7 +267,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
> if (!np)
> return -ENOENT;
>
> - ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
> + ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
> if (!ret) {
> of_node_put(np);
> return -ENOENT;
> @@ -181,7 +295,8 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
> goto free_drv;
> }
>
> - ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
> + ret = drv->data->get_version(cpu_dev,
> + speedbin_nvmem, &pvs_name, drv);
> if (ret) {
> nvmem_cell_put(speedbin_nvmem);
> goto free_drv;
> @@ -190,12 +305,20 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
> }
> of_node_put(np);
>
> - drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
> + drv->names_opp_tables = kcalloc(num_possible_cpus(),
> + sizeof(*drv->names_opp_tables),
> GFP_KERNEL);
> - if (!drv->opp_tables) {
> + if (!drv->names_opp_tables) {
> ret = -ENOMEM;
> goto free_drv;
> }
> + drv->hw_opp_tables = kcalloc(num_possible_cpus(),
> + sizeof(*drv->hw_opp_tables),
> + GFP_KERNEL);
> + if (!drv->hw_opp_tables) {
> + ret = -ENOMEM;
> + goto free_opp1;
> + }
>
> drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
> sizeof(*drv->genpd_opp_tables),
> @@ -213,11 +336,23 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
> }
>
> if (drv->data->get_version) {
> - drv->opp_tables[cpu] =
> - dev_pm_opp_set_supported_hw(cpu_dev,
> - &drv->versions, 1);
> - if (IS_ERR(drv->opp_tables[cpu])) {
> - ret = PTR_ERR(drv->opp_tables[cpu]);
> +
> + if (pvs_name) {
> + drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name(
> + cpu_dev,
> + pvs_name);
> + if (IS_ERR(drv->names_opp_tables[cpu])) {
> + ret = PTR_ERR(drv->names_opp_tables[cpu]);
> + dev_err(cpu_dev, "Failed to add OPP name %s\n",
> + pvs_name);
> + goto free_opp;
> + }
> + }
> +
> + drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw(
> + cpu_dev, &drv->versions, 1);
> + if (IS_ERR(drv->hw_opp_tables[cpu])) {
> + ret = PTR_ERR(drv->hw_opp_tables[cpu]);
> dev_err(cpu_dev,
> "Failed to set supported hardware\n");
> goto free_genpd_opp;
> @@ -259,11 +394,18 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
> kfree(drv->genpd_opp_tables);
> free_opp:
> for_each_possible_cpu(cpu) {
> - if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
> + if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu]))
> + break;
> + dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]);
> + }
> + for_each_possible_cpu(cpu) {
> + if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu]))
> break;
> - dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
> + dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
> }
> - kfree(drv->opp_tables);
> + kfree(drv->hw_opp_tables);
> +free_opp1:
Please, use better naming here.
> + kfree(drv->names_opp_tables);
> free_drv:
> kfree(drv);
>
> @@ -278,13 +420,16 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
> platform_device_unregister(cpufreq_dt_pdev);
>
> for_each_possible_cpu(cpu) {
> - if (drv->opp_tables[cpu])
> - dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
> + if (drv->names_opp_tables[cpu])
> + dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]);
> + if (drv->hw_opp_tables[cpu])
> + dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
> if (drv->genpd_opp_tables[cpu])
> dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
> }
>
> - kfree(drv->opp_tables);
> + kfree(drv->names_opp_tables);
> + kfree(drv->hw_opp_tables);
> kfree(drv->genpd_opp_tables);
> kfree(drv);
>
> @@ -303,6 +448,10 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
> { .compatible = "qcom,apq8096", .data = &match_data_kryo },
> { .compatible = "qcom,msm8996", .data = &match_data_kryo },
> { .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
> + { .compatible = "qcom,ipq8064", .data = &match_data_krait },
> + { .compatible = "qcom,apq8064", .data = &match_data_krait },
> + { .compatible = "qcom,msm8974", .data = &match_data_krait },
> + { .compatible = "qcom,msm8960", .data = &match_data_krait },
> {},
> };
>
> --
> 2.25.0
>