Convert the UniPhier MIO (Media I/O) DMA controller binding to DT
schema format.
Signed-off-by: Masahiro Yamada <[email protected]>
---
.../dma/socionext,uniphier-mio-dmac.yaml | 59 +++++++++++++++++++
.../bindings/dma/uniphier-mio-dmac.txt | 25 --------
2 files changed, 59 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
delete mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
new file mode 100644
index 000000000000..817e5aec3b31
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+ This works as an external DMA engine for SD/eMMC controllers etc.
+ found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+ - Masahiro Yamada <[email protected]>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ const: socionext,uniphier-mio-dmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ A list of interrupt specifiers associated with the DMA channels.
+ The number of interrupt lines is SoC-dependent.
+
+ clocks:
+ maxItems: 1
+
+ '#dma-cells':
+ description: The single cell represents the channel index.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+ // typo. The first two channels share a single interrupt line.
+
+ dmac: dma-controller@5a000000 {
+ compatible = "socionext,uniphier-mio-dmac";
+ reg = <0x5a000000 0x1000>;
+ interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+ <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+ clocks = <&mio_clk 7>;
+ #dma-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
deleted file mode 100644
index b12388dc7eac..000000000000
--- a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier Media IO DMA controller
-
-This works as an external DMA engine for SD/eMMC controllers etc.
-found in UniPhier LD4, Pro4, sLD8 SoCs.
-
-Required properties:
-- compatible: should be "socionext,uniphier-mio-dmac".
-- reg: offset and length of the register set for the device.
-- interrupts: a list of interrupt specifiers associated with the DMA channels.
-- clocks: a single clock specifier.
-- #dma-cells: should be <1>. The single cell represents the channel index.
-
-Example:
- dmac: dma-controller@5a000000 {
- compatible = "socionext,uniphier-mio-dmac";
- reg = <0x5a000000 0x1000>;
- interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
- <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
- clocks = <&mio_clk 7>;
- #dma-cells = <1>;
- };
-
-Note:
-In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
-The first two channels share a single interrupt line.
--
2.17.1