This is an add-on series to the main SoC Sparx5 series
(Message-ID: <[email protected]>).
It is expected that the DT patches are to be taken directly by the arm-soc
maintainers.
Lars Povlsen (3):
dt-bindings: hwmon: Add Sparx5 temperature sensor
arm64: dts: sparx5: Add hwmon temperature sensor
hwmon: sparx5: Add Sparx5 SoC temperature driver
.../bindings/hwmon/microchip,sparx5-temp.yaml | 39 +++++
arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 +
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 2 +-
drivers/hwmon/sparx5-temp.c | 154 ++++++++++++++++++
5 files changed, 210 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
create mode 100644 drivers/hwmon/sparx5-temp.c
--
2.26.2
This add the DT binding specification for the Sparx5 temperature
sensor.
Reviewed-by: Alexandre Belloni <[email protected]>
Signed-off-by: Lars Povlsen <[email protected]>
---
.../bindings/hwmon/microchip,sparx5-temp.yaml | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
new file mode 100644
index 0000000000000..0df4813fd7b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Temperature Monitor
+
+maintainers:
+ - Lars Povlsen <[email protected]>
+
+description: |
+ Microchip Sparx5 embedded temperature monitor
+
+properties:
+ compatible:
+ enum:
+ - microchip,sparx5-temp
+
+ reg:
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ tmon0: tmon@610508110 {
+ compatible = "microchip,sparx5-temp";
+ reg = <0x10508110 0xc>;
+ #thermal-sensor-cells = <0>;
+ };
+
--
2.26.2
This patch adds a temperature sensor driver to the Sparx5 SoC.
Reviewed-by: Alexandre Belloni <[email protected]>
Signed-off-by: Lars Povlsen <[email protected]>
---
drivers/hwmon/Kconfig | 10 +++
drivers/hwmon/Makefile | 2 +-
drivers/hwmon/sparx5-temp.c | 154 ++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+), 1 deletion(-)
create mode 100644 drivers/hwmon/sparx5-temp.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4c62f900bf7e8..130cb1f1748ff 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -480,6 +480,16 @@ config SENSORS_I5K_AMB
This driver can also be built as a module. If so, the module
will be called i5k_amb.
+config SENSORS_SPARX5
+ tristate "Sparx5 SoC temperature sensor"
+ depends on ARCH_SPARX5
+ help
+ If you say yes here you get support for temperature monitoring
+ with the Microchip Sparx5 SoC.
+
+ This driver can also be built as a module. If so, the module
+ will be called sparx5-temp.
+
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b0b9c8e571762..28a09986b7a62 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o
+obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
@@ -190,4 +191,3 @@ obj-$(CONFIG_SENSORS_OCC) += occ/
obj-$(CONFIG_PMBUS) += pmbus/
ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
-
diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
new file mode 100644
index 0000000000000..bf9dd102a9825
--- /dev/null
+++ b/drivers/hwmon/sparx5-temp.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Sparx5 SoC temperature sensor driver
+ *
+ * Copyright (C) 2020 Lars Povlsen <[email protected]>
+ */
+
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#define TEMP_CTRL 0
+#define TEMP_CFG 4
+#define TEMP_CFG_CYCLES GENMASK(24, 15)
+#define TEMP_CFG_CYCLES_OFF 15
+#define TEMP_CFG_ENA BIT(0)
+#define TEMP_STAT 8
+#define TEMP_STAT_VALID BIT(12)
+#define TEMP_STAT_TEMP GENMASK(11, 0)
+
+struct s5_hwmon {
+ void __iomem *base;
+};
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+ u32 val = readl(hwmon->base + TEMP_CFG);
+ u32 clk = 250;
+
+ val &= ~TEMP_CFG_CYCLES;
+ val |= (clk << TEMP_CFG_CYCLES_OFF);
+ val |= TEMP_CFG_ENA;
+
+ writel(val, hwmon->base + TEMP_CFG);
+}
+
+static void s5_temp_disable(void *data)
+{
+ struct s5_hwmon *hwmon = data;
+ u32 val = readl(hwmon->base + TEMP_CFG);
+
+ val &= ~TEMP_CFG_ENA;
+
+ writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *temp)
+{
+ struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+ int rc = 0, value;
+ u32 stat;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ stat = readl_relaxed(hwmon->base + TEMP_STAT);
+ if (stat & TEMP_STAT_VALID) {
+ value = (stat & TEMP_STAT_TEMP);
+ value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
+ value *= 100;
+ *temp = value;
+ } else
+ rc = -EINVAL;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ }
+
+ return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type != hwmon_temp)
+ return 0;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+ .is_visible = s5_is_visible,
+ .read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+ .ops = &s5_hwmon_ops,
+ .info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+ struct device *hwmon_dev;
+ struct s5_hwmon *hwmon;
+ int err = 0;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(hwmon->base))
+ return PTR_ERR(hwmon->base);
+
+ err = devm_add_action(&pdev->dev, s5_temp_disable, hwmon);
+ if (err)
+ return err;
+
+ s5_temp_enable(hwmon);
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+ "s5_temp",
+ hwmon,
+ &s5_chip_info,
+ NULL);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+ { .compatible = "microchip,sparx5-temp" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+ .probe = s5_temp_probe,
+ .driver = {
+ .name = "sparx5-temp",
+ .of_match_table = s5_temp_match,
+ },
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen <[email protected]>");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");
--
2.26.2
This adds a hwmon temperature node sensor to the Sparx5 SoC.
Reviewed-by: Alexandre Belloni <[email protected]>
Signed-off-by: Lars Povlsen <[email protected]>
---
arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index f09a49c41ce19..b5f2d088af30e 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -233,5 +233,11 @@ i2c1: i2c@600103000 {
clock-frequency = <100000>;
clocks = <&ahb_clk>;
};
+
+ tmon0: tmon@610508110 {
+ compatible = "microchip,sparx5-temp";
+ reg = <0x6 0x10508110 0xc>;
+ #thermal-sensor-cells = <0>;
+ };
};
};
--
2.26.2
On Wed, May 13, 2020 at 03:41:40PM +0200, Lars Povlsen wrote:
> This patch adds a temperature sensor driver to the Sparx5 SoC.
>
> Reviewed-by: Alexandre Belloni <[email protected]>
> Signed-off-by: Lars Povlsen <[email protected]>
> ---
> drivers/hwmon/Kconfig | 10 +++
> drivers/hwmon/Makefile | 2 +-
> drivers/hwmon/sparx5-temp.c | 154 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 165 insertions(+), 1 deletion(-)
> create mode 100644 drivers/hwmon/sparx5-temp.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 4c62f900bf7e8..130cb1f1748ff 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -480,6 +480,16 @@ config SENSORS_I5K_AMB
> This driver can also be built as a module. If so, the module
> will be called i5k_amb.
>
> +config SENSORS_SPARX5
> + tristate "Sparx5 SoC temperature sensor"
> + depends on ARCH_SPARX5
> + help
> + If you say yes here you get support for temperature monitoring
> + with the Microchip Sparx5 SoC.
> +
> + This driver can also be built as a module. If so, the module
> + will be called sparx5-temp.
> +
> config SENSORS_F71805F
> tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
> depends on !PPC
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index b0b9c8e571762..28a09986b7a62 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -64,6 +64,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
> obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
> obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
> obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o
> +obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
> obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
> obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
> obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
> @@ -190,4 +191,3 @@ obj-$(CONFIG_SENSORS_OCC) += occ/
> obj-$(CONFIG_PMBUS) += pmbus/
>
> ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
> -
> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
> new file mode 100644
> index 0000000000000..bf9dd102a9825
> --- /dev/null
> +++ b/drivers/hwmon/sparx5-temp.c
> @@ -0,0 +1,154 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/* Sparx5 SoC temperature sensor driver
> + *
> + * Copyright (C) 2020 Lars Povlsen <[email protected]>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
Unnecessary include
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +
> +#define TEMP_CTRL 0
> +#define TEMP_CFG 4
> +#define TEMP_CFG_CYCLES GENMASK(24, 15)
> +#define TEMP_CFG_CYCLES_OFF 15
> +#define TEMP_CFG_ENA BIT(0)
> +#define TEMP_STAT 8
> +#define TEMP_STAT_VALID BIT(12)
> +#define TEMP_STAT_TEMP GENMASK(11, 0)
> +
> +struct s5_hwmon {
> + void __iomem *base;
> +};
> +
> +static void s5_temp_enable(struct s5_hwmon *hwmon)
> +{
> + u32 val = readl(hwmon->base + TEMP_CFG);
> + u32 clk = 250;
> +
> + val &= ~TEMP_CFG_CYCLES;
> + val |= (clk << TEMP_CFG_CYCLES_OFF);
> + val |= TEMP_CFG_ENA;
> +
> + writel(val, hwmon->base + TEMP_CFG);
> +}
> +
> +static void s5_temp_disable(void *data)
> +{
> + struct s5_hwmon *hwmon = data;
> + u32 val = readl(hwmon->base + TEMP_CFG);
> +
> + val &= ~TEMP_CFG_ENA;
> +
> + writel(val, hwmon->base + TEMP_CFG);
> +}
> +
> +static int s5_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *temp)
> +{
> + struct s5_hwmon *hwmon = dev_get_drvdata(dev);
> + int rc = 0, value;
> + u32 stat;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + stat = readl_relaxed(hwmon->base + TEMP_STAT);
> + if (stat & TEMP_STAT_VALID) {
> + value = (stat & TEMP_STAT_TEMP);
Unnecessary ( )
> + value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
> + value *= 100;
> + *temp = value;
> + } else
> + rc = -EINVAL;
-EINVAL is for bad used input. -EIO, maybe, unless there is a better error.
Also,
if (!(stat & TEMP_STAT_VALID))
return -EIO;
...
would be easier to read (and not result in a checkpatch warning).
> + break;
> + default:
> + rc = -EOPNOTSUPP;
break;
> + }
> +
> + return rc;
> +}
> +
> +static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + if (type != hwmon_temp)
> + return 0;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + return 0444;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct hwmon_channel_info *s5_info[] = {
> + HWMON_CHANNEL_INFO(chip,
> + HWMON_C_REGISTER_TZ),
> + HWMON_CHANNEL_INFO(temp,
> + HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops s5_hwmon_ops = {
> + .is_visible = s5_is_visible,
> + .read = s5_read,
> +};
> +
> +static const struct hwmon_chip_info s5_chip_info = {
> + .ops = &s5_hwmon_ops,
> + .info = s5_info,
> +};
> +
> +static int s5_temp_probe(struct platform_device *pdev)
> +{
> + struct device *hwmon_dev;
> + struct s5_hwmon *hwmon;
> + int err = 0;
Unnecessary initialization
> +
> + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
> + if (!hwmon)
> + return -ENOMEM;
> +
> + hwmon->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(hwmon->base))
> + return PTR_ERR(hwmon->base);
> +
> + err = devm_add_action(&pdev->dev, s5_temp_disable, hwmon);
> + if (err)
> + return err;
> +
> + s5_temp_enable(hwmon);
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
> + "s5_temp",
> + hwmon,
> + &s5_chip_info,
> + NULL);
> +
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +const struct of_device_id s5_temp_match[] = {
> + { .compatible = "microchip,sparx5-temp" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, s5_temp_match);
> +
> +static struct platform_driver s5_temp_driver = {
> + .probe = s5_temp_probe,
> + .driver = {
> + .name = "sparx5-temp",
> + .of_match_table = s5_temp_match,
> + },
> +};
> +
> +module_platform_driver(s5_temp_driver);
> +
> +MODULE_AUTHOR("Lars Povlsen <[email protected]>");
> +MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
> +MODULE_LICENSE("GPL");
> --
> 2.26.2
Guenter Roeck writes:
> On Wed, May 13, 2020 at 03:41:40PM +0200, Lars Povlsen wrote:
>> This patch adds a temperature sensor driver to the Sparx5 SoC.
>>
>> Reviewed-by: Alexandre Belloni <[email protected]>
>> Signed-off-by: Lars Povlsen <[email protected]>
>> ---
>> drivers/hwmon/Kconfig | 10 +++
>> drivers/hwmon/Makefile | 2 +-
>> drivers/hwmon/sparx5-temp.c | 154 ++++++++++++++++++++++++++++++++++++
>> 3 files changed, 165 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/hwmon/sparx5-temp.c
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index 4c62f900bf7e8..130cb1f1748ff 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -480,6 +480,16 @@ config SENSORS_I5K_AMB
>> This driver can also be built as a module. If so, the module
>> will be called i5k_amb.
>>
>> +config SENSORS_SPARX5
>> + tristate "Sparx5 SoC temperature sensor"
>> + depends on ARCH_SPARX5
>> + help
>> + If you say yes here you get support for temperature monitoring
>> + with the Microchip Sparx5 SoC.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called sparx5-temp.
>> +
>> config SENSORS_F71805F
>> tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
>> depends on !PPC
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index b0b9c8e571762..28a09986b7a62 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -64,6 +64,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
>> obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
>> obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
>> obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o
>> +obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
>> obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
>> obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
>> obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
>> @@ -190,4 +191,3 @@ obj-$(CONFIG_SENSORS_OCC) += occ/
>> obj-$(CONFIG_PMBUS) += pmbus/
>>
>> ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
>> -
>> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
>> new file mode 100644
>> index 0000000000000..bf9dd102a9825
>> --- /dev/null
>> +++ b/drivers/hwmon/sparx5-temp.c
>> @@ -0,0 +1,154 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/* Sparx5 SoC temperature sensor driver
>> + *
>> + * Copyright (C) 2020 Lars Povlsen <[email protected]>
>> + */
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/hwmon.h>
>> +#include <linux/hwmon-sysfs.h>
>
> Unnecessary include
Ack.
>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +
>> +#define TEMP_CTRL 0
>> +#define TEMP_CFG 4
>> +#define TEMP_CFG_CYCLES GENMASK(24, 15)
>> +#define TEMP_CFG_CYCLES_OFF 15
>> +#define TEMP_CFG_ENA BIT(0)
>> +#define TEMP_STAT 8
>> +#define TEMP_STAT_VALID BIT(12)
>> +#define TEMP_STAT_TEMP GENMASK(11, 0)
>> +
>> +struct s5_hwmon {
>> + void __iomem *base;
>> +};
>> +
>> +static void s5_temp_enable(struct s5_hwmon *hwmon)
>> +{
>> + u32 val = readl(hwmon->base + TEMP_CFG);
>> + u32 clk = 250;
>> +
>> + val &= ~TEMP_CFG_CYCLES;
>> + val |= (clk << TEMP_CFG_CYCLES_OFF);
>> + val |= TEMP_CFG_ENA;
>> +
>> + writel(val, hwmon->base + TEMP_CFG);
>> +}
>> +
>> +static void s5_temp_disable(void *data)
>> +{
>> + struct s5_hwmon *hwmon = data;
>> + u32 val = readl(hwmon->base + TEMP_CFG);
>> +
>> + val &= ~TEMP_CFG_ENA;
>> +
>> + writel(val, hwmon->base + TEMP_CFG);
>> +}
>> +
>> +static int s5_read(struct device *dev, enum hwmon_sensor_types type,
>> + u32 attr, int channel, long *temp)
>> +{
>> + struct s5_hwmon *hwmon = dev_get_drvdata(dev);
>> + int rc = 0, value;
>> + u32 stat;
>> +
>> + switch (attr) {
>> + case hwmon_temp_input:
>> + stat = readl_relaxed(hwmon->base + TEMP_STAT);
>> + if (stat & TEMP_STAT_VALID) {
>> + value = (stat & TEMP_STAT_TEMP);
>
> Unnecessary ( )
Removed.
>
>> + value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
>> + value *= 100;
>> + *temp = value;
>> + } else
>> + rc = -EINVAL;
>
> -EINVAL is for bad used input. -EIO, maybe, unless there is a better error.
> Also,
>
> if (!(stat & TEMP_STAT_VALID))
> return -EIO;
Ok, changed.
> ...
>
> would be easier to read (and not result in a checkpatch warning).
>
>> + break;
>> + default:
>> + rc = -EOPNOTSUPP;
>
> break;
>
Added.
>> + }
>> +
>> + return rc;
>> +}
>> +
>> +static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
>> + u32 attr, int channel)
>> +{
>> + if (type != hwmon_temp)
>> + return 0;
>> +
>> + switch (attr) {
>> + case hwmon_temp_input:
>> + return 0444;
>> + default:
>> + return 0;
>> + }
>> +}
>> +
>> +static const struct hwmon_channel_info *s5_info[] = {
>> + HWMON_CHANNEL_INFO(chip,
>> + HWMON_C_REGISTER_TZ),
>> + HWMON_CHANNEL_INFO(temp,
>> + HWMON_T_INPUT),
>> + NULL
>> +};
>> +
>> +static const struct hwmon_ops s5_hwmon_ops = {
>> + .is_visible = s5_is_visible,
>> + .read = s5_read,
>> +};
>> +
>> +static const struct hwmon_chip_info s5_chip_info = {
>> + .ops = &s5_hwmon_ops,
>> + .info = s5_info,
>> +};
>> +
>> +static int s5_temp_probe(struct platform_device *pdev)
>> +{
>> + struct device *hwmon_dev;
>> + struct s5_hwmon *hwmon;
>> + int err = 0;
>
> Unnecessary initialization
>
Removed
>> +
>> + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
>> + if (!hwmon)
>> + return -ENOMEM;
>> +
>> + hwmon->base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(hwmon->base))
>> + return PTR_ERR(hwmon->base);
>> +
>> + err = devm_add_action(&pdev->dev, s5_temp_disable, hwmon);
>> + if (err)
>> + return err;
>> +
>> + s5_temp_enable(hwmon);
>> +
>> + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
>> + "s5_temp",
>> + hwmon,
>> + &s5_chip_info,
>> + NULL);
>> +
>> + return PTR_ERR_OR_ZERO(hwmon_dev);
>> +}
>> +
>> +const struct of_device_id s5_temp_match[] = {
>> + { .compatible = "microchip,sparx5-temp" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, s5_temp_match);
>> +
>> +static struct platform_driver s5_temp_driver = {
>> + .probe = s5_temp_probe,
>> + .driver = {
>> + .name = "sparx5-temp",
>> + .of_match_table = s5_temp_match,
>> + },
>> +};
>> +
>> +module_platform_driver(s5_temp_driver);
>> +
>> +MODULE_AUTHOR("Lars Povlsen <[email protected]>");
>> +MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.26.2
Thank you for your input, I will submit anew asap.
---Lars
--
Lars Povlsen,
Microchip
On Wed, May 13, 2020 at 03:41:39PM +0200, Lars Povlsen wrote:
> This adds a hwmon temperature node sensor to the Sparx5 SoC.
>
> Reviewed-by: Alexandre Belloni <[email protected]>
> Signed-off-by: Lars Povlsen <[email protected]>
> ---
> arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
> index f09a49c41ce19..b5f2d088af30e 100644
> --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
> +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
> @@ -233,5 +233,11 @@ i2c1: i2c@600103000 {
> clock-frequency = <100000>;
> clocks = <&ahb_clk>;
> };
> +
> + tmon0: tmon@610508110 {
> + compatible = "microchip,sparx5-temp";
> + reg = <0x6 0x10508110 0xc>;
These nodes are all very odd with a couple of registers spread out at
randomish addresses. DT nodes should roughly correlate to h/w blocks,
not sets of registers for a driver like this seems to be.
Please make the dts files one patch. Reviewing a node at a time is not
all that effective.
Rob
Hi Rob,
On 27/05/2020 20:29:31-0600, Rob Herring wrote:
> On Wed, May 13, 2020 at 03:41:39PM +0200, Lars Povlsen wrote:
> > This adds a hwmon temperature node sensor to the Sparx5 SoC.
> >
> > Reviewed-by: Alexandre Belloni <[email protected]>
> > Signed-off-by: Lars Povlsen <[email protected]>
> > ---
> > arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
> > index f09a49c41ce19..b5f2d088af30e 100644
> > --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
> > +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
> > @@ -233,5 +233,11 @@ i2c1: i2c@600103000 {
> > clock-frequency = <100000>;
> > clocks = <&ahb_clk>;
> > };
> > +
> > + tmon0: tmon@610508110 {
> > + compatible = "microchip,sparx5-temp";
> > + reg = <0x6 0x10508110 0xc>;
>
> These nodes are all very odd with a couple of registers spread out at
> randomish addresses. DT nodes should roughly correlate to h/w blocks,
> not sets of registers for a driver like this seems to be.
>
The DT nodes correlates to HW block, this and the previous families of
SoCs were designed with packed registers. There is no padding between HW
block registers.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com