changes since v1:
- clean up the commit history and cut down
on unnecessary commit count
- bring the DTS in line with the newest ones
- fix some minor typos that went unnoticed
- drop RPMCC patch (sent separately)
- drop the pmi8994 patch (applied)
The patchet depends on:
- https://patchwork.kernel.org/patch/11584267/ (even though bullhead used
that for a few years and the property never existed but nobody noticed)
- https://patchwork.kernel.org/patch/11580845/ (no point duplicating it for 8994)
- RPMCC for 8992/4 (sent soon after this series)
Konrad Dybcio (12):
arm64: dts: qcom: msm8994: Modernize the DTS style
arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device
arm64: dts: qcom: msm8994: Add a proper CPU map
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: msm8994: Add SDHCI1 node
arm64: dts: qcom: msm8994: Add SCM node
arm64: dts: qcom: msm8994: Add I2C, SPI and BLSP DMA nodes
arm64: dts: qcom: msm8994: Add pmu node
arm64: dts: qcom: msm8994: Add PSCI node
arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/msm8992-bullhead-rev-101.dts | 264 ++++++-
.../boot/dts/qcom/msm8994-angler-rev-101.dts | 2 +
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 30 -
arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 -------
.../msm8994-sony-xperia-kitakami-sumire.dts | 395 ++++++++++
arch/arm64/boot/dts/qcom/msm8994.dtsi | 710 ++++++++++++++++--
7 files changed, 1303 insertions(+), 367 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
--
2.27.0
This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/msm8992-bullhead-rev-101.dts | 264 ++++++++++++++++-
arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
2 files changed, 263 insertions(+), 269 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..893fc5b8fc34 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -47,4 +47,266 @@ ramoops@1ff00000 {
};
};
-#include "msm8994-smd-rpm.dtsi"
+&smd_rpm {
+ rpm {
+ rpm_requests {
+ pm8994-regulators {
+
+ vdd_l1-supply = <&pm8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vreg_vph_pwr>;
+ vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2 = <&pm8994_s4>;
+
+ s1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ s2 {
+ /* TODO */
+ };
+
+ s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <325000>;
+ };
+
+ s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ /* TODO */
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ /* TODO */
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ qcom,init-voltage = <1200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ proxy-supply = <&pm8994_l12>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ status = "okay";
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ qcom,init-voltage = <2950000>;
+ status = "okay";
+ };
+
+ l14 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ qcom,init-voltage = <1200000>;
+ proxy-supply = <&pm8994_l14>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ status = "okay";
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ status = "okay";
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ qcom,init-voltage = <2700000>;
+ status = "okay";
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ qcom,init-voltage = <2700000>;
+ status = "okay";
+ };
+
+ l18 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ qcom,init-voltage = <3000000>;
+ qcom,init-ldo-mode = <1>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ status = "okay";
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ qcom,init-voltage = <3100000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ qcom,init-voltage = <3075000>;
+ };
+
+ l25 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l26 {
+ /* TODO: value from downstream
+ regulator-min-microvolt = <987500>;
+ fails to apply */
+ };
+
+ l27 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ qcom,init-voltage = <1050000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ qcom,init-voltage = <1000000>;
+ proxy-supply = <&pm8994_l28>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ };
+
+ l29 {
+ /* TODO: Unsupported voltage range.
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ */
+ };
+
+ l30 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+
+ l31 {
+ regulator-min-microvolt = <1262500>;
+ regulator-max-microvolt = <1262500>;
+ qcom,init-voltage = <1262500>;
+ };
+
+ l32 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
- rpm {
- rpm_requests {
- pm8994-regulators {
-
- vdd_l1-supply = <&pm8994_s1>;
- vdd_l2_26_28-supply = <&pm8994_s3>;
- vdd_l3_11-supply = <&pm8994_s3>;
- vdd_l4_27_31-supply = <&pm8994_s3>;
- vdd_l5_7-supply = <&pm8994_s3>;
- vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
- vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
- vdd_l25-supply = <&pm8994_s5>;
- vdd_lvs1_2 = <&pm8994_s4>;
-
- s1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- s2 {
- /* TODO */
- };
-
- s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
- regulator-system-load = <325000>;
- };
-
- s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- s7 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- l2 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- /* TODO */
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- /* TODO */
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- qcom,init-voltage = <1200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- proxy-supply = <&pm8994_l12>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- status = "okay";
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- qcom,init-voltage = <2950000>;
- status = "okay";
- };
-
- l14 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- qcom,init-voltage = <1200000>;
- proxy-supply = <&pm8994_l14>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- status = "okay";
- };
-
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- status = "okay";
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- qcom,init-voltage = <2700000>;
- status = "okay";
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- qcom,init-voltage = <2700000>;
- status = "okay";
- };
-
- l18 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- qcom,init-voltage = <3000000>;
- qcom,init-ldo-mode = <1>;
- };
-
- l19 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- status = "okay";
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-allow-set-load;
- regulator-system-load = <570000>;
- };
-
- l21 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- qcom,init-voltage = <1800000>;
- };
-
- l22 {
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- qcom,init-voltage = <3100000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3150000>;
- qcom,init-voltage = <3075000>;
- };
-
- l25 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- };
-
- l26 {
- /* TODO: value from downstream
- regulator-min-microvolt = <987500>;
- fails to apply */
- };
-
- l27 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- qcom,init-voltage = <1050000>;
- };
-
- l28 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- qcom,init-voltage = <1000000>;
- proxy-supply = <&pm8994_l28>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- };
-
- l29 {
- /* TODO: Unsupported voltage range.
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- */
- };
-
- l30 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
- };
-
- l31 {
- regulator-min-microvolt = <1262500>;
- regulator-max-microvolt = <1262500>;
- qcom,init-voltage = <1262500>;
- };
-
- l32 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
- };
- };
- };
- };
-};
--
2.27.0
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- qcom,smem -> smem
- remove unit-address from smem
- retire msm8994-pins.dtsi
- add some of the missing pins
- make comments C-style
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 30 ---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 288 ++++++++++++++++-----
2 files changed, 224 insertions(+), 94 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
deleted file mode 100644
index 2e118d967f53..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
- blsp1_uart2_default: blsp1_uart2_default {
- pinmux {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart2_sleep: blsp1_uart2_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index b1c2d7d6a0f2..79e6e46798c8 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -6,12 +6,6 @@
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM 8994";
- compatible = "qcom,msm8994";
- // msm-id and pmic-id are required by bootloader for
- // proper selection of dt blob
- qcom,msm-id = <207 0x20000>;
- qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
interrupt-parent = <&intc>;
#address-cells = <2>;
@@ -19,6 +13,20 @@ / {
chosen { };
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -42,12 +50,27 @@ L2_0: l2-cache {
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 2 0xff08>,
- <1 3 0xff08>,
- <1 4 0xff08>,
- <1 1 0xff08>;
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smem_mem: smem_region@6a00000 {
+ reg = <0x0 0x6a00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
};
soc: soc {
@@ -123,72 +146,209 @@ frame@f9028000 {
};
};
+ blsp1_uart2: serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ };
+
+ gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8994";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x2000>;
+ };
+
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
- msmgpio: pinctrl@fd510000 {
+ tcsr_mutex_regs: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
+ tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- gpio-ranges = <&msmgpio 0 0 146>;
+ gpio-ranges = <&tlmm 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- };
- blsp1_uart2: serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- clock-names = "core", "iface";
- clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&clock_gcc GCC_BLSP1_AHB_CLK>;
- };
+ blsp1_uart2_default: blsp1-uart2-default {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
- tcsr_mutex_regs: syscon@fd484000 {
- compatible = "syscon";
- reg = <0xfd484000 0x2000>;
- };
+ blsp1_uart2_sleep: blsp1-uart2-sleep {
+ function = "gpio";
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
- clock_gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8994";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x2000>;
- };
- };
+ blsp2_uart2_default: blsp2-uart2-default {
+ function = "blsp_uart8";
+ pins = "gpio45", "gpio46";
+ drive-strength = <2>;
+ bias-disable;
+ };
- memory {
- device_type = "memory";
- // We expect the bootloader to fill in the reg
- reg = <0 0 0 0>;
- };
+ blsp2_uart2_sleep: blsp2-uart2-sleep {
+ function = "gpio";
+ pins = "gpio45", "gpio46";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
+ i2c1_default: i2c1-default {
+ function = "blsp_i2c1";
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ i2c1_sleep: i2c1-sleep {
+ function = "gpio";
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ i2c2_default: i2c2-default {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
- smem_mem: smem_region@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
- no-map;
+ i2c2_sleep: i2c2-sleep {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c4_default: i2c4-default {
+ function = "blsp_i2c4";
+ pins = "gpio19", "gpio20";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c4_sleep: i2c4-sleep {
+ function = "gpio";
+ pins = "gpio19", "gpio20";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+
+ i2c5_default: i2c5-default {
+ function = "blsp_i2c5";
+ pins = "gpio23", "gpio24";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c5_sleep: i2c5-sleep {
+ function = "gpio";
+ pins = "gpio23", "gpio24";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c6_default: i2c6-default {
+ function = "blsp_i2c6";
+ pins = "gpio28", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c6_sleep: i2c6-sleep {
+ function = "gpio";
+ pins = "gpio28", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_spi0_default: blsp1-spi0-default {
+ default {
+ function = "blsp_spi1";
+ pins = "gpio0", "gpio1", "gpio3";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+ cs {
+ function = "gpio";
+ pins = "gpio8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_spi0_sleep: blsp1-spi0-sleep {
+ pins = "gpio0", "gpio1", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc1_clk_on: clk-on {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ sdc1_clk_off: clk-off {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc1_cmd_on: cmd-on {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ sdc1_cmd_off: cmd-off {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc1_data_on: data-on {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ sdc1_data_off: data-off {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc1_rclk_on: rclk-on {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+
+ sdc1_rclk_off: rclk-off {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
};
};
@@ -198,12 +358,12 @@ tcsr_mutex: hwlock {
#hwlock-cells = <1>;
};
- qcom,smem@6a00000 {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- hwlocks = <&tcsr_mutex 3>;
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 2 0xff08>,
+ <1 3 0xff08>,
+ <1 4 0xff08>,
+ <1 1 0xff08>;
};
};
-
-#include "msm8994-pins.dtsi"
--
2.27.0
On Tue 23 Jun 15:48 PDT 2020, Konrad Dybcio wrote:
[..]
> diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
[..]
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 2 0xff08>,
> + <1 3 0xff08>,
> + <1 4 0xff08>,
> + <1 1 0xff08>;
Indentation is off here and these are supposed to be GIC_PPI. So I fixed
this and applied the patch.
Thanks,
Bjorn
On Tue 23 Jun 15:48 PDT 2020, Konrad Dybcio wrote:
> This was the only device using that dtsi, so no point
> keeping it separate AND with a confusing name (bullhead
> is based on msm8992 and the file contains regulator
> values for that specific board).
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> .../dts/qcom/msm8992-bullhead-rev-101.dts | 264 ++++++++++++++++-
> arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
> 2 files changed, 263 insertions(+), 269 deletions(-)
> delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> index 32670d5afdd6..893fc5b8fc34 100644
> --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> @@ -47,4 +47,266 @@ ramoops@1ff00000 {
> };
> };
>
> -#include "msm8994-smd-rpm.dtsi"
> +&smd_rpm {
> + rpm {
> + rpm_requests {
Per my request on the earlier regulator patch, please leave
msm8992/msm8994.dtsi without any regulators defined (clocks and rpmpd is
fine) and then add them here to &rpm_requests.o
I.e. pretty much what you're doing here, but remove two indentation
levels and add compatible and labels to these regulators.
Regards,
Bjorn
> + pm8994-regulators {
> +
> + vdd_l1-supply = <&pm8994_s1>;
> + vdd_l2_26_28-supply = <&pm8994_s3>;
> + vdd_l3_11-supply = <&pm8994_s3>;
> + vdd_l4_27_31-supply = <&pm8994_s3>;
> + vdd_l5_7-supply = <&pm8994_s3>;
> + vdd_l6_12_32-supply = <&pm8994_s5>;
> + vdd_l8_16_30-supply = <&vreg_vph_pwr>;
> + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
> + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
> + vdd_l14_15-supply = <&pm8994_s5>;
> + vdd_l17_29-supply = <&vreg_vph_pwr>;
> + vdd_l20_21-supply = <&vreg_vph_pwr>;
> + vdd_l25-supply = <&pm8994_s5>;
> + vdd_lvs1_2 = <&pm8994_s4>;
> +
> + s1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + s2 {
> + /* TODO */
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-allow-set-load;
> + regulator-system-load = <325000>;
> + };
> +
> + s5 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> + };
> +
> + s7 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + };
> +
> + l3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l5 {
> + /* TODO */
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l7 {
> + /* TODO */
> + };
> +
> + l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + qcom,init-voltage = <1200000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + proxy-supply = <&pm8994_l12>;
> + qcom,proxy-consumer-enable;
> + qcom,proxy-consumer-current = <10000>;
> + status = "okay";
> + };
> +
> + l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + qcom,init-voltage = <2950000>;
> + status = "okay";
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + qcom,init-voltage = <1200000>;
> + proxy-supply = <&pm8994_l14>;
> + qcom,proxy-consumer-enable;
> + qcom,proxy-consumer-current = <10000>;
> + status = "okay";
> + };
> +
> + l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + status = "okay";
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + qcom,init-voltage = <2700000>;
> + status = "okay";
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + qcom,init-voltage = <2700000>;
> + status = "okay";
> + };
> +
> + l18 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + qcom,init-voltage = <3000000>;
> + qcom,init-ldo-mode = <1>;
> + };
> +
> + l19 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + status = "okay";
> + };
> +
> + l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-allow-set-load;
> + regulator-system-load = <570000>;
> + };
> +
> + l21 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + qcom,init-voltage = <1800000>;
> + };
> +
> + l22 {
> + regulator-min-microvolt = <3100000>;
> + regulator-max-microvolt = <3100000>;
> + qcom,init-voltage = <3100000>;
> + };
> +
> + l23 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + qcom,init-voltage = <2800000>;
> + };
> +
> + l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3150000>;
> + qcom,init-voltage = <3075000>;
> + };
> +
> + l25 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + };
> +
> + l26 {
> + /* TODO: value from downstream
> + regulator-min-microvolt = <987500>;
> + fails to apply */
> + };
> +
> + l27 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + qcom,init-voltage = <1050000>;
> + };
> +
> + l28 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + qcom,init-voltage = <1000000>;
> + proxy-supply = <&pm8994_l28>;
> + qcom,proxy-consumer-enable;
> + qcom,proxy-consumer-current = <10000>;
> + };
> +
> + l29 {
> + /* TODO: Unsupported voltage range.
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + qcom,init-voltage = <2800000>;
> + */
> + };
> +
> + l30 {
> + /* TODO: get this verified
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + */
> + };
> +
> + l31 {
> + regulator-min-microvolt = <1262500>;
> + regulator-max-microvolt = <1262500>;
> + qcom,init-voltage = <1262500>;
> + };
> +
> + l32 {
> + /* TODO: get this verified
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,init-voltage = <1800000>;
> + */
> + };
> + };
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
> deleted file mode 100644
> index 31e3eb6ab515..000000000000
> --- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
> +++ /dev/null
> @@ -1,268 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/* Copyright (c) 2015, LGE Inc. All rights reserved.
> - * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> - */
> -
> -&smd_rpm {
> - rpm {
> - rpm_requests {
> - pm8994-regulators {
> -
> - vdd_l1-supply = <&pm8994_s1>;
> - vdd_l2_26_28-supply = <&pm8994_s3>;
> - vdd_l3_11-supply = <&pm8994_s3>;
> - vdd_l4_27_31-supply = <&pm8994_s3>;
> - vdd_l5_7-supply = <&pm8994_s3>;
> - vdd_l6_12_32-supply = <&pm8994_s5>;
> - vdd_l8_16_30-supply = <&vreg_vph_pwr>;
> - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
> - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
> - vdd_l14_15-supply = <&pm8994_s5>;
> - vdd_l17_29-supply = <&vreg_vph_pwr>;
> - vdd_l20_21-supply = <&vreg_vph_pwr>;
> - vdd_l25-supply = <&pm8994_s5>;
> - vdd_lvs1_2 = <&pm8994_s4>;
> -
> - s1 {
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <800000>;
> - };
> -
> - s2 {
> - /* TODO */
> - };
> -
> - s3 {
> - regulator-min-microvolt = <1300000>;
> - regulator-max-microvolt = <1300000>;
> - };
> -
> - s4 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-allow-set-load;
> - regulator-system-load = <325000>;
> - };
> -
> - s5 {
> - regulator-min-microvolt = <2150000>;
> - regulator-max-microvolt = <2150000>;
> - };
> -
> - s7 {
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - };
> -
> - l1 {
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - };
> -
> - l2 {
> - regulator-min-microvolt = <1250000>;
> - regulator-max-microvolt = <1250000>;
> - };
> -
> - l3 {
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - };
> -
> - l4 {
> - regulator-min-microvolt = <1225000>;
> - regulator-max-microvolt = <1225000>;
> - };
> -
> - l5 {
> - /* TODO */
> - };
> -
> - l6 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - l7 {
> - /* TODO */
> - };
> -
> - l8 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - l9 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - };
> -
> - l10 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - };
> -
> - l11 {
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - qcom,init-voltage = <1200000>;
> - };
> -
> - l12 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - proxy-supply = <&pm8994_l12>;
> - qcom,proxy-consumer-enable;
> - qcom,proxy-consumer-current = <10000>;
> - status = "okay";
> - };
> -
> - l13 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <2950000>;
> - qcom,init-voltage = <2950000>;
> - status = "okay";
> - };
> -
> - l14 {
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - qcom,init-voltage = <1200000>;
> - proxy-supply = <&pm8994_l14>;
> - qcom,proxy-consumer-enable;
> - qcom,proxy-consumer-current = <10000>;
> - status = "okay";
> - };
> -
> - l15 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - status = "okay";
> - };
> -
> - l16 {
> - regulator-min-microvolt = <2700000>;
> - regulator-max-microvolt = <2700000>;
> - qcom,init-voltage = <2700000>;
> - status = "okay";
> - };
> -
> - l17 {
> - regulator-min-microvolt = <2700000>;
> - regulator-max-microvolt = <2700000>;
> - qcom,init-voltage = <2700000>;
> - status = "okay";
> - };
> -
> - l18 {
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-always-on;
> - qcom,init-voltage = <3000000>;
> - qcom,init-ldo-mode = <1>;
> - };
> -
> - l19 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - status = "okay";
> - };
> -
> - l20 {
> - regulator-min-microvolt = <2950000>;
> - regulator-max-microvolt = <2950000>;
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-allow-set-load;
> - regulator-system-load = <570000>;
> - };
> -
> - l21 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - qcom,init-voltage = <1800000>;
> - };
> -
> - l22 {
> - regulator-min-microvolt = <3100000>;
> - regulator-max-microvolt = <3100000>;
> - qcom,init-voltage = <3100000>;
> - };
> -
> - l23 {
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - qcom,init-voltage = <2800000>;
> - };
> -
> - l24 {
> - regulator-min-microvolt = <3075000>;
> - regulator-max-microvolt = <3150000>;
> - qcom,init-voltage = <3075000>;
> - };
> -
> - l25 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - };
> -
> - l26 {
> - /* TODO: value from downstream
> - regulator-min-microvolt = <987500>;
> - fails to apply */
> - };
> -
> - l27 {
> - regulator-min-microvolt = <1050000>;
> - regulator-max-microvolt = <1050000>;
> - qcom,init-voltage = <1050000>;
> - };
> -
> - l28 {
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - qcom,init-voltage = <1000000>;
> - proxy-supply = <&pm8994_l28>;
> - qcom,proxy-consumer-enable;
> - qcom,proxy-consumer-current = <10000>;
> - };
> -
> - l29 {
> - /* TODO: Unsupported voltage range.
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - qcom,init-voltage = <2800000>;
> - */
> - };
> -
> - l30 {
> - /* TODO: get this verified
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - */
> - };
> -
> - l31 {
> - regulator-min-microvolt = <1262500>;
> - regulator-max-microvolt = <1262500>;
> - qcom,init-voltage = <1262500>;
> - };
> -
> - l32 {
> - /* TODO: get this verified
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - qcom,init-voltage = <1800000>;
> - */
> - };
> - };
> - };
> - };
> -};
> --
> 2.27.0
>